This is a small, baro-only recording dual-deploy altimeter for
model rocketry
-EasyMini is currently in development, with a handful of prototype
-boards built and flown. Production units will eventually be available from the
-[Garbee and Garbee](http://auric.gag.com) web
-store.
+EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web
+store, and should be available from our distributors soon.
For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.
+visit the [AltOS](../AltOS) page on this site. EasyMini requires AltOS
+version 1.3 or later.
-These are photos of our current prototype version:
+These are photos of a prototype version, we haven't take photos of the
+production units yet:
<a href="v0.2/easymini-top.jpg"> <img src="v0.2/easymini-top-thumb.jpg"></a>
<a href="v0.2/easymini-parts.jpg"> <img src="v0.2/easymini-parts-thumb.jpg"></a>
* Designed to use a battery supplying 3.7V-12V.
* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
* 2MB on-board data logging flash
+* Weighs only 6.5g (less than 1/4 oz)
### Developer View ###
which is available in [html](../AltOS/doc/altusmetrum.html) and
[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/easymini-outline.pdf] format.
+
The hardware design files can be found on [git.gag.com](http://git.gag.com)
in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).
+
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for production PCB version 1.0 in more easily readable form.
+
+* [schematic](v1.0/easymini-sch.pdf)
+* [pcb artwork](v1.0/easymini-pcb.pdf)