remove dangling comma

[web/altusmetrum] / EasyMini / index.mdwn

diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index c1bf79a5fdeaa94aca9e4e15de934d3e1d55d4d1..5c6b91faff19d1ae283ef8e43b65fa3fc7028431 100644 (file)
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -4,12 +4,13 @@
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 
-EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web 
-store, and should be available from our distributors soon.
+EasyMini version 2.0 is available from the
+[Garbee and Garbee](https://shop.gag.com) web store
+and from our distributors.
 
-For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.  EasyMini requires AltOS
-version 1.3 or later.
+For the latest EasyMini firmware and related ground station software,
+please visit the [AltOS](../AltOS) page on this site.  EasyMini
+version 2.0 requires AltOS version 1.8.4 or later.
 
 These are photos of version 2.0:
 
@@ -31,7 +32,7 @@ These are photos of version 2.0:
 ### Developer View ###
 
 * Hardware Features
-       * [STM32F042])http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
+       * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM
@@ -62,7 +63,7 @@ in the comprehensive Altus Metrum manual in
 [pdf](../AltOS/doc/altusmetrum.pdf) formats
 
 An outline of the board with drill hole locations is available in
-[pdf](../Documents/easymini-outline.pdf) format.
+[pdf](../AltOS/doc/easymini-outline.pdf) format.
 
 Thanks to Bryan Duke, there's also a 3d model of EasyMini available on 
 [Thingiverse](http://www.thingiverse.com/thing:1946852).