contribution!</p><p>Have fun using these products, and we hope to meet all of you
out on the rocket flight line somewhere.</p><div class="blockquote"><blockquote class="blockquote"><div class="literallayout"><p>Bdale Garbee, KB0G<br />
NAR #87103, TRA #12201</p></div></blockquote></div><div class="blockquote"><blockquote class="blockquote"><div class="literallayout"><p>Keith Packard, KD7SQG<br />
-NAR #88757, TRA #12200</p></div></blockquote></div></div><div class="toc"><p><strong>Table of Contents</strong></p><dl class="toc"><dt><span class="chapter"><a href="#_introduction_and_overview">1. Introduction and Overview</a></span></dt><dt><span class="chapter"><a href="#_getting_started">2. Getting Started</a></span></dt><dd><dl><dt><span class="section"><a href="#_batteries">2.1. Batteries</a></span></dt><dt><span class="section"><a href="#_linux_mac_windows_ground_station_software">2.2. Linux/Mac/Windows Ground Station Software</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_using_altus_metrum_hardware">3. Using Altus Metrum Hardware</a></span></dt><dd><dl><dt><span class="section"><a href="#_wiring_and_electrical_interference">3.1. Wiring and Electrical Interference</a></span></dt><dt><span class="section"><a href="#_hooking_up_lithium_polymer_batteries">3.2. Hooking Up Lithium Polymer Batteries</a></span></dt><dt><span class="section"><a href="#_hooking_up_pyro_charges">3.3. Hooking Up Pyro Charges</a></span></dt><dt><span class="section"><a href="#_hooking_up_a_power_switch">3.4. Hooking Up a Power Switch</a></span></dt><dt><span class="section"><a href="#_understanding_beeps">3.5. Understanding Beeps</a></span></dt><dt><span class="section"><a href="#_turning_on_the_power">3.6. Turning On the Power</a></span></dt><dt><span class="section"><a href="#_using_an_external_active_switch_circuit">3.7. Using an External Active Switch Circuit</a></span></dt><dt><span class="section"><a href="#_using_a_separate_pyro_battery">3.8. Using a Separate Pyro Battery</a></span></dt><dt><span class="section"><a href="#_using_a_different_kind_of_battery">3.9. Using a Different Kind of Battery</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_easymini">4. EasyMini</a></span></dt><dd><dl><dt><span class="section"><a href="#_easymini_screw_terminals">4.1. EasyMini Screw Terminals</a></span></dt><dt><span class="section"><a href="#_connecting_a_battery_to_easymini">4.2. Connecting A Battery To EasyMini</a></span></dt><dt><span class="section"><a href="#_charging_lithium_batteries">4.3. Charging Lithium Batteries</a></span></dt><dt><span class="section"><a href="#_using_a_separate_pyro_battery_with_easymini">4.4. Using a Separate Pyro Battery with EasyMini</a></span></dt><dt><span class="section"><a href="#_using_an_active_switch_with_easymini">4.5. Using an Active Switch with EasyMini</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_installation">5. Installation</a></span></dt><dt><span class="chapter"><a href="#_using_altus_metrum_products">6. Using Altus Metrum Products</a></span></dt><dd><dl><dt><span class="section"><a href="#_in_the_rocket">6.1. In the Rocket</a></span></dt><dt><span class="section"><a href="#_on_the_ground">6.2. On the Ground</a></span></dt><dt><span class="section"><a href="#_data_analysis">6.3. Data Analysis</a></span></dt><dt><span class="section"><a href="#_future_plans">6.4. Future Plans</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_altosui">7. AltosUI</a></span></dt><dd><dl><dt><span class="section"><a href="#_save_flight_data">7.1. Save Flight Data</a></span></dt><dt><span class="section"><a href="#_replay_flight">7.2. Replay Flight</a></span></dt><dt><span class="section"><a href="#_graph_data">7.3. Graph Data</a></span></dt><dd><dl><dt><span class="section"><a href="#_flight_graph">7.3.1. Flight Graph</a></span></dt><dt><span class="section"><a href="#_configure_graph">7.3.2. Configure Graph</a></span></dt><dt><span class="section"><a href="#_flight_statistics">7.3.3. Flight Statistics</a></span></dt></dl></dd><dt><span class="section"><a href="#_export_data">7.4. Export Data</a></span></dt><dd><dl><dt><span class="section"><a href="#_comma_separated_value_format">7.4.1. Comma Separated Value Format</a></span></dt></dl></dd><dt><span class="section"><a href="#_configure_altimeter">7.5. Configure Altimeter</a></span></dt><dd><dl><dt><span class="section"><a href="#_main_deploy_altitude">7.5.1. Main Deploy Altitude</a></span></dt><dt><span class="section"><a href="#_apogee_delay">7.5.2. Apogee Delay</a></span></dt><dt><span class="section"><a href="#_apogee_lockout">7.5.3. Apogee Lockout</a></span></dt><dt><span class="section"><a href="#_maximum_flight_log_size">7.5.4. Maximum Flight Log Size</a></span></dt><dt><span class="section"><a href="#_ignitor_firing_mode">7.5.5. Ignitor Firing Mode</a></span></dt><dt><span class="section"><a href="#_beeper_frequency">7.5.6. Beeper Frequency</a></span></dt></dl></dd><dt><span class="section"><a href="#_configure_altosui">7.6. Configure AltosUI</a></span></dt><dd><dl><dt><span class="section"><a href="#_log_directory">7.6.1. Log Directory</a></span></dt><dt><span class="section"><a href="#_imperial_units">7.6.2. Imperial Units</a></span></dt><dt><span class="section"><a href="#_serial_debug">7.6.3. Serial Debug</a></span></dt><dt><span class="section"><a href="#_font_size">7.6.4. Font size</a></span></dt><dt><span class="section"><a href="#_look_amp_feel">7.6.5. Look & feel</a></span></dt><dt><span class="section"><a href="#_menu_position">7.6.6. Menu position</a></span></dt></dl></dd><dt><span class="section"><a href="#_flash_image">7.7. Flash Image</a></span></dt><dt><span class="section"><a href="#_fire_igniter">7.8. Fire Igniter</a></span></dt></dl></dd><dt><span class="appendix"><a href="#_system_operation">A. System Operation</a></span></dt><dd><dl><dt><span class="section"><a href="#_firmware_modes">A.1. Firmware Modes</a></span></dt><dt><span class="section"><a href="#_ground_testing">A.2. Ground Testing</a></span></dt><dt><span class="section"><a href="#_configurable_parameters">A.3. Configurable Parameters</a></span></dt></dl></dd><dt><span class="appendix"><a href="#_handling_precautions">B. Handling Precautions</a></span></dt><dt><span class="appendix"><a href="#_updating_device_firmware">C. Updating Device Firmware</a></span></dt><dd><dl><dt><span class="section"><a href="#_updating_easymini_firmware">C.1. Updating EasyMini Firmware</a></span></dt><dd><dl><dt><span class="section"><a href="#_recovering_from_self_flashing_failure">C.1.1. Recovering From Self-Flashing Failure</a></span></dt></dl></dd></dl></dd><dt><span class="appendix"><a href="#_flight_data_recording">D. Flight Data Recording</a></span></dt><dt><span class="appendix"><a href="#_altus_metrum_hardware_specifications">E. Altus Metrum Hardware Specifications</a></span></dt><dt><span class="appendix"><a href="#_release_notes">F. Release Notes</a></span></dt><dd><dl><dt><span class="section"><a href="#_release_notes_for_version_1_
6_3">F.1. Release Notes for Version 1.6.3</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos">F.1.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications">F.1.2. AltosUI and TeleGPS Applications</a></span></dt><dt><span class="section"><a href="#_altosdroid">F.1.3. AltosDroid</a></span></dt><dt><span class="section"><a href="#_documentation">F.1.4. Documentation</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_2">F.2. Release Notes for Version 1.6.2</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_2">F.2.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_2">F.2.2. AltosUI and TeleGPS Applications</a></span></dt><dt><span class="section"><a href="#_documentation_2">F.2.3. Documentation</a></span></dt></dl></dd></dl></dd></dl></div><div class="list-of-figures"><p><strong>List of Figures</strong></p><dl><dt>4.1. <a href="#idm274">EasyMini Board</a></dt><dt>7.1. <a href="#idm405">AltosUI Main Window</a></dt><dt>7.2. <a href="#idm432">Flight Data Graph</a></dt><dt>7.3. <a href="#idm443">Flight Graph Configuration</a></dt><dt>7.4. <a href="#idm453">Flight Statistics</a></dt><dt>7.5. <a href="#idm471">Altimeter Configuration</a></dt><dt>7.6. <a href="#idm541">Configure AltosUI Dialog</a></dt><dt>7.7. <a href="#idm575">Fire Igniter Window</a></dt></dl></div><div class="list-of-tables"><p><strong>List of Tables</strong></p><dl><dt>3.1. <a href="#idm90">AltOS Modes</a></dt><dt>3.2. <a href="#idm198">Pad/Idle Indications</a></dt><dt>4.1. <a href="#idm286">EasyMini Screw Terminals</a></dt><dt>D.1. <a href="#idm675">Data Storage on Altus Metrum altimeters</a></dt><dt>E.1. <a href="#idm706">Altus Metrum Flight Computer Electronics</a></dt><dt>E.2. <a href="#idm746">Altus Metrum Flight Computer Mechanical Components</a></dt></dl></div><div class="chapter"><div class="titlepage"><div><div><h1 class="title"><a id="_introduction_and_overview"></a>Chapter 1. Introduction and Overview</h1></div></div></div><p>Welcome to the Altus Metrum community! Our circuits and software reflect
+NAR #88757, TRA #12200</p></div></blockquote></div></div><div class="toc"><p><strong>Table of Contents</strong></p><dl class="toc"><dt><span class="chapter"><a href="#_introduction_and_overview">1. Introduction and Overview</a></span></dt><dt><span class="chapter"><a href="#_getting_started">2. Getting Started</a></span></dt><dd><dl><dt><span class="section"><a href="#_batteries">2.1. Batteries</a></span></dt><dt><span class="section"><a href="#_linux_mac_windows_ground_station_software">2.2. Linux/Mac/Windows Ground Station Software</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_using_altus_metrum_hardware">3. Using Altus Metrum Hardware</a></span></dt><dd><dl><dt><span class="section"><a href="#_wiring_and_electrical_interference">3.1. Wiring and Electrical Interference</a></span></dt><dt><span class="section"><a href="#_hooking_up_lithium_polymer_batteries">3.2. Hooking Up Lithium Polymer Batteries</a></span></dt><dt><span class="section"><a href="#_hooking_up_pyro_charges">3.3. Hooking Up Pyro Charges</a></span></dt><dt><span class="section"><a href="#_hooking_up_a_power_switch">3.4. Hooking Up a Power Switch</a></span></dt><dt><span class="section"><a href="#_understanding_beeps">3.5. Understanding Beeps</a></span></dt><dt><span class="section"><a href="#_turning_on_the_power">3.6. Turning On the Power</a></span></dt><dt><span class="section"><a href="#_using_an_external_active_switch_circuit">3.7. Using an External Active Switch Circuit</a></span></dt><dt><span class="section"><a href="#_using_a_separate_pyro_battery">3.8. Using a Separate Pyro Battery</a></span></dt><dt><span class="section"><a href="#_using_a_different_kind_of_battery">3.9. Using a Different Kind of Battery</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_easymini">4. EasyMini</a></span></dt><dd><dl><dt><span class="section"><a href="#_easymini_screw_terminals">4.1. EasyMini Screw Terminals</a></span></dt><dt><span class="section"><a href="#_connecting_a_battery_to_easymini">4.2. Connecting A Battery To EasyMini</a></span></dt><dt><span class="section"><a href="#_charging_lithium_batteries">4.3. Charging Lithium Batteries</a></span></dt><dt><span class="section"><a href="#_using_a_separate_pyro_battery_with_easymini">4.4. Using a Separate Pyro Battery with EasyMini</a></span></dt><dt><span class="section"><a href="#_using_an_active_switch_with_easymini">4.5. Using an Active Switch with EasyMini</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_installation">5. Installation</a></span></dt><dt><span class="chapter"><a href="#_using_altus_metrum_products">6. Using Altus Metrum Products</a></span></dt><dd><dl><dt><span class="section"><a href="#_in_the_rocket">6.1. In the Rocket</a></span></dt><dt><span class="section"><a href="#_on_the_ground">6.2. On the Ground</a></span></dt><dt><span class="section"><a href="#_data_analysis">6.3. Data Analysis</a></span></dt><dt><span class="section"><a href="#_future_plans">6.4. Future Plans</a></span></dt></dl></dd><dt><span class="chapter"><a href="#_altosui">7. AltosUI</a></span></dt><dd><dl><dt><span class="section"><a href="#_save_flight_data">7.1. Save Flight Data</a></span></dt><dt><span class="section"><a href="#_replay_flight">7.2. Replay Flight</a></span></dt><dt><span class="section"><a href="#_graph_data">7.3. Graph Data</a></span></dt><dd><dl><dt><span class="section"><a href="#_flight_graph">7.3.1. Flight Graph</a></span></dt><dt><span class="section"><a href="#_configure_graph">7.3.2. Configure Graph</a></span></dt><dt><span class="section"><a href="#_flight_statistics">7.3.3. Flight Statistics</a></span></dt></dl></dd><dt><span class="section"><a href="#_export_data">7.4. Export Data</a></span></dt><dd><dl><dt><span class="section"><a href="#_comma_separated_value_format">7.4.1. Comma Separated Value Format</a></span></dt></dl></dd><dt><span class="section"><a href="#_configure_altimeter">7.5. Configure Altimeter</a></span></dt><dd><dl><dt><span class="section"><a href="#_main_deploy_altitude">7.5.1. Main Deploy Altitude</a></span></dt><dt><span class="section"><a href="#_apogee_delay">7.5.2. Apogee Delay</a></span></dt><dt><span class="section"><a href="#_apogee_lockout">7.5.3. Apogee Lockout</a></span></dt><dt><span class="section"><a href="#_maximum_flight_log_size">7.5.4. Maximum Flight Log Size</a></span></dt><dt><span class="section"><a href="#_ignitor_firing_mode">7.5.5. Ignitor Firing Mode</a></span></dt><dt><span class="section"><a href="#_beeper_frequency">7.5.6. Beeper Frequency</a></span></dt></dl></dd><dt><span class="section"><a href="#_configure_altosui">7.6. Configure AltosUI</a></span></dt><dd><dl><dt><span class="section"><a href="#_log_directory">7.6.1. Log Directory</a></span></dt><dt><span class="section"><a href="#_imperial_units">7.6.2. Imperial Units</a></span></dt><dt><span class="section"><a href="#_serial_debug">7.6.3. Serial Debug</a></span></dt><dt><span class="section"><a href="#_font_size">7.6.4. Font size</a></span></dt><dt><span class="section"><a href="#_look_amp_feel">7.6.5. Look & feel</a></span></dt><dt><span class="section"><a href="#_menu_position">7.6.6. Menu position</a></span></dt></dl></dd><dt><span class="section"><a href="#_flash_image">7.7. Flash Image</a></span></dt><dt><span class="section"><a href="#_fire_igniter">7.8. Fire Igniter</a></span></dt></dl></dd><dt><span class="appendix"><a href="#_system_operation">A. System Operation</a></span></dt><dd><dl><dt><span class="section"><a href="#_firmware_modes">A.1. Firmware Modes</a></span></dt><dt><span class="section"><a href="#_ground_testing">A.2. Ground Testing</a></span></dt><dt><span class="section"><a href="#_configurable_parameters">A.3. Configurable Parameters</a></span></dt></dl></dd><dt><span class="appendix"><a href="#_handling_precautions">B. Handling Precautions</a></span></dt><dt><span class="appendix"><a href="#_updating_device_firmware">C. Updating Device Firmware</a></span></dt><dd><dl><dt><span class="section"><a href="#_updating_easymini_firmware">C.1. Updating EasyMini Firmware</a></span></dt><dd><dl><dt><span class="section"><a href="#_recovering_from_self_flashing_failure">C.1.1. Recovering From Self-Flashing Failure</a></span></dt></dl></dd></dl></dd><dt><span class="appendix"><a href="#_flight_data_recording">D. Flight Data Recording</a></span></dt><dt><span class="appendix"><a href="#_altus_metrum_hardware_specifications">E. Altus Metrum Hardware Specifications</a></span></dt><dt><span class="appendix"><a href="#_release_notes">F. Release Notes</a></span></dt><dd><dl><dt><span class="section"><a href="#_release_notes_for_version_1_
8_3">F.1. Release Notes for Version 1.8.3</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos">F.1.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications">F.1.2. AltosUI and TeleGPS Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_8_2">F.2. Release Notes for Version 1.8.2</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_2">F.2.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_2">F.2.2. AltosUI and TeleGPS Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_8_1">F.3. Release Notes for Version 1.8.1</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_3">F.3.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_3">F.3.2. AltosUI and TeleGPS Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_8">F.4. Release Notes for Version 1.8</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_4">F.4.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_4">F.4.2. AltosUI and TeleGPS Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_7">F.5. Release Notes for Version 1.7</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_5">F.5.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_5">F.5.2. AltosUI and TeleGPS Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_8">F.6. Release Notes for Version 1.6.8</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_6">F.6.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_telegps_and_altosdroid_applications">F.6.2. AltosUI, TeleGPS and AltosDroid Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_5">F.7. Release Notes for Version 1.6.5</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_7">F.7.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_telegps_and_altosdroid_applications_2">F.7.2. AltosUI, TeleGPS and AltosDroid Applications</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_4">F.8. Release Notes for Version 1.6.4</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_8">F.8.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_telegps_and_altosdroid_applications_3">F.8.2. AltosUI, TeleGPS and AltosDroid Applications</a></span></dt><dt><span class="section"><a href="#_documentation">F.8.3. Documentation</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_3">F.9. Release Notes for Version 1.6.3</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_9">F.9.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_6">F.9.2. AltosUI and TeleGPS Applications</a></span></dt><dt><span class="section"><a href="#_altosdroid">F.9.3. AltosDroid</a></span></dt><dt><span class="section"><a href="#_documentation_2">F.9.4. Documentation</a></span></dt></dl></dd><dt><span class="section"><a href="#_release_notes_for_version_1_6_2">F.10. Release Notes for Version 1.6.2</a></span></dt><dd><dl><dt><span class="section"><a href="#_altos_10">F.10.1. AltOS</a></span></dt><dt><span class="section"><a href="#_altosui_and_telegps_applications_7">F.10.2. AltosUI and TeleGPS Applications</a></span></dt><dt><span class="section"><a href="#_documentation_3">F.10.3. Documentation</a></span></dt></dl></dd></dl></dd></dl></div><div class="list-of-figures"><p><strong>List of Figures</strong></p><dl><dt>4.1. <a href="#idm274">EasyMini Board</a></dt><dt>7.1. <a href="#idm405">AltosUI Main Window</a></dt><dt>7.2. <a href="#idm432">Flight Data Graph</a></dt><dt>7.3. <a href="#idm443">Flight Graph Configuration</a></dt><dt>7.4. <a href="#idm462">Flight Statistics</a></dt><dt>7.5. <a href="#idm480">Altimeter Configuration</a></dt><dt>7.6. <a href="#idm550">Configure AltosUI Dialog</a></dt><dt>7.7. <a href="#idm584">Fire Igniter Window</a></dt></dl></div><div class="list-of-tables"><p><strong>List of Tables</strong></p><dl><dt>3.1. <a href="#idm90">AltOS Modes</a></dt><dt>3.2. <a href="#idm198">Pad/Idle Indications</a></dt><dt>4.1. <a href="#idm286">EasyMini Screw Terminals</a></dt><dt>D.1. <a href="#idm684">Data Storage on Altus Metrum altimeters</a></dt><dt>E.1. <a href="#idm715">Altus Metrum Flight Computer Electronics</a></dt><dt>E.2. <a href="#idm755">Altus Metrum Flight Computer Mechanical Components</a></dt></dl></div><div class="chapter"><div class="titlepage"><div><div><h1 class="title"><a id="_introduction_and_overview"></a>Chapter 1. Introduction and Overview</h1></div></div></div><p>Welcome to the Altus Metrum community! Our circuits and software reflect
our passion for both hobby rocketry and Free Software. We hope their
capabilities and performance will delight you in every way, but by
releasing all of our hardware and software designs under open licenses,
The right mouse button causes a pop-up menu to be
displayed, giving you the option save or print the
plot.</p></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_configure_graph"></a>7.3.2. Configure Graph</h3></div></div></div><div class="figure"><a id="idm443"></a><p class="title"><strong>Figure 7.3. Flight Graph Configuration</strong></p><div class="figure-contents"><div class="mediaobject"><img src="graph-configure.png" width="495" alt="graph-configure.png" /></div></div></div><br class="figure-break" /><p>This selects which graph elements to show, and, at the
-very bottom, lets you switch between metric and
-imperial units</p></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_flight_statistics"></a>7.3.3. Flight Statistics</h3></div></div></div><div class="figure"><a id="idm453"></a><p class="title"><strong>Figure 7.4. Flight Statistics</strong></p><div class="figure-contents"><div class="mediaobject"><img src="graph-stats.png" width="495" alt="graph-stats.png" /></div></div></div><br class="figure-break" /><p>Shows overall data computed from the flight.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_export_data"></a>7.4. Export Data</h2></div></div></div><p>This tool takes the raw data files and makes them
+very bottom. It also lets you configure how
+the graph is drawn:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Whether to use metric or imperial units
+</li><li class="listitem">
+Whether to show a marker at each data
+point. When displaying a small section of
+the graph, these can be useful to know what
+data values were recorded.
+</li><li class="listitem">
+How wide to draw the lines in the graph
+</li><li class="listitem">
+How to filter speed and acceleration data
+computed from barometric data. Flight
+computers with accelerometers never display
+computed acceleration data, and only use
+barometric data to compute speed during
+descent. Flight computers without
+accelerometers always compute both speed and
+acceleration from barometric data. A larger
+value smooths the data more.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_flight_statistics"></a>7.3.3. Flight Statistics</h3></div></div></div><div class="figure"><a id="idm462"></a><p class="title"><strong>Figure 7.4. Flight Statistics</strong></p><div class="figure-contents"><div class="mediaobject"><img src="graph-stats.png" width="495" alt="graph-stats.png" /></div></div></div><br class="figure-break" /><p>Shows overall data computed from the flight.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_export_data"></a>7.4. Export Data</h2></div></div></div><p>This tool takes the raw data files and makes them
available for external analysis. When you select this
button, you are prompted to select a flight data file,
which can be either a .eeprom or .telem. The .eeprom
each field separated by a comma and at least one
space. All of the sensor values are converted to
standard units, with the barometric data reported in
-both pressure, altitude and height above pad units.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_configure_altimeter"></a>7.5. Configure Altimeter</h2></div></div></div><div class="figure"><a id="idm4
71"></a><p class="title"><strong>Figure 7.5. Altimeter Configuration</strong></p><div class="figure-contents"><div class="mediaobject"><img src="configure-altimeter.png" width="324" alt="configure-altimeter.png" /></div></div></div><br class="figure-break" /><p>Select this button and then select an altimeter.</p><p>The first few lines of the dialog provide information about the
+both pressure, altitude and height above pad units.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_configure_altimeter"></a>7.5. Configure Altimeter</h2></div></div></div><div class="figure"><a id="idm4
80"></a><p class="title"><strong>Figure 7.5. Altimeter Configuration</strong></p><div class="figure-contents"><div class="mediaobject"><img src="configure-altimeter.png" width="324" alt="configure-altimeter.png" /></div></div></div><br class="figure-break" /><p>Select this button and then select an altimeter.</p><p>The first few lines of the dialog provide information about the
connected device, including the product name,
software version and hardware serial number. Below that are the
individual configuration entries.</p><p>At the bottom of the dialog, there are four buttons:</p><div class="variablelist"><dl class="variablelist"><dt><span class="term">
airframe, having all of them sound at the same
frequency can be confusing. This parameter
lets you adjust the base beeper frequency
-value.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_configure_altosui"></a>7.6. Configure AltosUI</h2></div></div></div><div class="figure"><a id="idm5
41"></a><p class="title"><strong>Figure 7.6. Configure AltosUI Dialog</strong></p><div class="figure-contents"><div class="mediaobject"><img src="configure-altosui.png" width="216" alt="configure-altosui.png" /></div></div></div><br class="figure-break" /><p>This button presents a dialog so that you can
+value.</p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_configure_altosui"></a>7.6. Configure AltosUI</h2></div></div></div><div class="figure"><a id="idm5
50"></a><p class="title"><strong>Figure 7.6. Configure AltosUI Dialog</strong></p><div class="figure-contents"><div class="mediaobject"><img src="configure-altosui.png" width="216" alt="configure-altosui.png" /></div></div></div><br class="figure-break" /><p>This button presents a dialog so that you can
configure the AltosUI global settings.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_log_directory"></a>7.6.1. Log Directory</h3></div></div></div><p>AltosUI logs all telemetry data and saves all
flash data to this directory. This
directory is also used as the staring point
programmed directly
over USB (self programming). Please read
the directions for flashing devices in
-<a class="xref" href="#_updating_device_firmware" title="Appendix C. Updating Device Firmware">Appendix C, <em>Updating Device Firmware</em></a>.</p></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_fire_igniter"></a>7.8. Fire Igniter</h2></div></div></div><div class="figure"><a id="idm5
75"></a><p class="title"><strong>Figure 7.7. Fire Igniter Window</strong></p><div class="figure-contents"><div class="mediaobject"><img src="fire-igniter.png" width="108" alt="fire-igniter.png" /></div></div></div><br class="figure-break" /><p>This activates the igniter circuits in the flight
+<a class="xref" href="#_updating_device_firmware" title="Appendix C. Updating Device Firmware">Appendix C, <em>Updating Device Firmware</em></a>.</p></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_fire_igniter"></a>7.8. Fire Igniter</h2></div></div></div><div class="figure"><a id="idm5
84"></a><p class="title"><strong>Figure 7.7. Fire Igniter Window</strong></p><div class="figure-contents"><div class="mediaobject"><img src="fire-igniter.png" width="108" alt="fire-igniter.png" /></div></div></div><br class="figure-break" /><p>This activates the igniter circuits in the flight
computer to help test recovery systems
deployment.</p><p>Selecting the <span class="emphasis"><em>Fire Igniter</em></span> button brings up the
usual device selection dialog. Pick the desired
descent.
Data are logged to
an on-board flash memory part, which can be partitioned into
-several equal-sized blocks, one for each flight.</p><div class="table"><a id="idm6
75"></a><p class="title"><strong>Table D.1. Data Storage on Altus Metrum altimeters</strong></p><div class="table-contents"><table class="table" summary="Data Storage on Altus Metrum altimeters" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Bytes per Sample </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Total Storage </th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top">Minutes at Full Rate</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>16</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1MB</p></td><td style="" align="left" valign="top"><p>10</p></td></tr></tbody></table></div></div><br class="table-break" /><p>The on-board flash is partitioned into separate flight logs,
+several equal-sized blocks, one for each flight.</p><div class="table"><a id="idm6
84"></a><p class="title"><strong>Table D.1. Data Storage on Altus Metrum altimeters</strong></p><div class="table-contents"><table class="table" summary="Data Storage on Altus Metrum altimeters" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Bytes per Sample </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Total Storage </th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top">Minutes at Full Rate</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>16</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1MB</p></td><td style="" align="left" valign="top"><p>10</p></td></tr></tbody></table></div></div><br class="table-break" /><p>The on-board flash is partitioned into separate flight logs,
each of a fixed maximum size. Increase the maximum size of
each log and you reduce the number of flights that can be
stored. Decrease the size and you can store more flights.</p><p>Configuration data is also stored in the flash memory on
from the flight computer before it fills up. The flight
computer will still successfully control the flight even if it
cannot log data, so the only thing you will lose is the data.</p></div><div class="appendix"><div class="titlepage"><div><div><h1 class="title"><a id="_altus_metrum_hardware_specifications"></a>Appendix E. Altus Metrum Hardware Specifications</h1></div></div></div><p>Here’s the full set of Altus Metrum products, both in
-production and retired.</p><div class="table"><a id="idm706"></a><p class="title"><strong>Table E.1. Altus Metrum Flight Computer Electronics</strong></p><div class="table-contents"><table class="table" summary="Altus Metrum Flight Computer Electronics" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /><col class="col_5" /><col class="col_6" /><col class="col_7" /><col class="col_8" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Barometer </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Z-axis accel </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> GPS </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> 3D sensors </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Storage </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> RF Output </th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top"> Battery</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini v1.0</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>MS5607 30km (100k')</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1MB</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="" align="left" valign="top"><p>3.7-12V</p></td></tr></tbody></table></div></div><br class="table-break" /><p></p><div class="table"><a id="idm746"></a><p class="title"><strong>Table E.2. Altus Metrum Flight Computer Mechanical Components</strong></p><div class="table-contents"><table class="table" summary="Altus Metrum Flight Computer Mechanical Components" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /><col class="col_5" /><col class="col_6" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Connectors</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Screw Terminals</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Width</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Length</th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top">Tube Size</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>Debug USB Battery</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>Apogee pyro Main pyro Battery</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>0.8 inch (2.03cm)</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1½ inch (3.81cm)</p></td><td style="" align="left" valign="top"><p>24mm coupler</p></td></tr></tbody></table></div></div><br class="table-break" /></div><div class="appendix"><div class="titlepage"><div><div><h1 class="title"><a id="_release_notes"></a>Appendix F. Release Notes</h1></div></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_3"></a>F.1. Release Notes for Version 1.6.3</h2></div></div></div><p>Version 1.6.3 adds idle mode to AltosDroid and has bug fixes
+production and retired.</p><div class="table"><a id="idm715"></a><p class="title"><strong>Table E.1. Altus Metrum Flight Computer Electronics</strong></p><div class="table-contents"><table class="table" summary="Altus Metrum Flight Computer Electronics" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /><col class="col_5" /><col class="col_6" /><col class="col_7" /><col class="col_8" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Barometer </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Z-axis accel </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> GPS </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> 3D sensors </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> Storage </th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top"> RF Output </th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top"> Battery</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini v1.0</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>MS5607 30km (100k')</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1MB</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>-</p></td><td style="" align="left" valign="top"><p>3.7-12V</p></td></tr></tbody></table></div></div><br class="table-break" /><p></p><div class="table"><a id="idm755"></a><p class="title"><strong>Table E.2. Altus Metrum Flight Computer Mechanical Components</strong></p><div class="table-contents"><table class="table" summary="Altus Metrum Flight Computer Mechanical Components" cellpadding="4px" style="border-collapse: collapse;border-top: 1px solid #78079a; border-bottom: 1px solid #78079a; border-left: 1px solid #78079a; border-right: 1px solid #78079a; "><colgroup><col class="col_1" /><col class="col_2" /><col class="col_3" /><col class="col_4" /><col class="col_5" /><col class="col_6" /></colgroup><thead><tr><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Device</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Connectors</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Screw Terminals</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Width</th><th style="border-right: 1px solid #78079a; border-bottom: 1px solid #78079a; " align="left" valign="top">Length</th><th style="border-bottom: 1px solid #78079a; " align="left" valign="top">Tube Size</th></tr></thead><tbody><tr><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>EasyMini</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>Debug USB Battery</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>Apogee pyro Main pyro Battery</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>0.8 inch (2.03cm)</p></td><td style="border-right: 1px solid #78079a; " align="left" valign="top"><p>1½ inch (3.81cm)</p></td><td style="" align="left" valign="top"><p>24mm coupler</p></td></tr></tbody></table></div></div><br class="table-break" /></div><div class="appendix"><div class="titlepage"><div><div><h1 class="title"><a id="_release_notes"></a>Appendix F. Release Notes</h1></div></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_8_3"></a>F.1. Release Notes for Version 1.8.3</h2></div></div></div><p>Version 1.8.3 includes support for TeleMega version 3.0 along
+with two important flight computer fixes. This version also
+changes KML export data to make Tripoli Record reporting
+better and some updates to graph presentation and data
+downloading.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos"></a>F.1.1. AltOS</h3></div></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="_altos_new_features"></a>AltOS New Features</h4></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Support for TeleMega version 3.0 hardware.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="_altos_bug_fixes"></a>AltOS Bug Fixes</h4></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Ground testing EasyMega and TeleMega additional pyro
+channels could result in a sticky <span class="emphasis"><em>fired</em></span> status which would
+prevent these channels from firing on future flights.
+</li><li class="listitem">
+Corrupted flight log records could prevent future flights
+from capturing log data.
+</li><li class="listitem">
+Fixed saving of pyro configuration that ended with
+<span class="emphasis"><em>Descending</em></span>.
+</li></ul></div></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications"></a>F.1.2. AltosUI and TeleGPS Applications</h3></div></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="_altosui_new_features"></a>AltosUI New Features</h4></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Support for TeleMega version 3.0.
+</li><li class="listitem">
+Graph lines have improved appearance to make them easier to
+distinguish. Markers may be placed at data points to show
+captured recorded data values.
+</li><li class="listitem">
+Graphing offers the ability to adjust the smoothing of
+computed speed and acceleration data.
+</li><li class="listitem">
+The download dialog now offers to graph new flights, checks
+for existing files to avoid overwriting data and reports if
+there are checksum errors in the downloaded data.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="_altosui_telegps_bug_fixes"></a>AltosUI/TeleGPS Bug Fixes</h4></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Restore TeleGPS tracking behavior.
+</li><li class="listitem">
+Display flight computer call sign and serial number in
+Monitor Idle mode instead of ground station values.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="_altosui_and_telegps_changes"></a>AltosUI and TeleGPS Changes</h4></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+KML export now reports both barometric and GPS altitude data
+to make it more useful for Tripoli record reporting.
+</li><li class="listitem">
+CSV export now includes TeleMega/EasyMega pyro voltages and
+tilt angle.
+</li></ul></div><p></p></div></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_8_2"></a>F.2. Release Notes for Version 1.8.2</h2></div></div></div><p>Version 1.8.2 includes support for TeleGPS version 2.0 along
+with accelerometer recalibration support in AltosUI.</p><p>1.8.2 also contains a couple of minor fixes for AltosUI when
+analyzing saved data files.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_2"></a>F.2.1. AltOS</h3></div></div></div><p>AltOS New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Support for TeleGPS version 2.0 hardware.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_2"></a>F.2.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI and TeleGPS New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Support for TeleGPS version 2.0.
+</li><li class="listitem">
+Accelerometer re-calibration user interface.
+</li></ul></div><p>AltosUI and TeleGPS Bug Fixes</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Prevent some crashes when reading older saved flight data
+for graphing or KML export.
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_8_1"></a>F.3. Release Notes for Version 1.8.1</h2></div></div></div><p>Version 1.8.1 includes an important bug fix for Apogee Lockout
+operation in all flight computers. Anyone using this option
+must update firmware.</p><p>This release also contains a change in how flight computers
+with accelerometers deal with speeds around and above Mach
+1. In previous versions, the flight computer would completely
+disregard the barometric sensor above 330m/s (around Mach
+1). Now, the data from the barometric sensor is reduced in
+effect without ever going away entirely. This prevents early
+drogue deployment for flights which spend considerable time
+above Mach 1.</p><p>1.8.1 also contains a couple of minor fixes for AltosUI when
+analyzing saved data files.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_3"></a>F.3.1. AltOS</h3></div></div></div><p>AltOS Bug Fixes</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Handle time value wrapping in Apogee Lockout
+correctly. Without this, apogee lockout would sometimes
+prevent any drogue charge from firing.
+</li><li class="listitem">
+Change Kalman filter on flight computers with accelerometer
+to continue using the barometric sensor even at high speeds
+to avoid unintentional drogue deployment during
+deceleration.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_3"></a>F.3.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Add new <span class="emphasis"><em>Huge</em></span> font size to make text even bigger on high
+resolution monitors.
+</li></ul></div><p>AltosUI Bug Fixes</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Prevent some crashes when reading older saved flight data
+for graphing or KML export.
+</li><li class="listitem">
+Load frequency preference at startup. The loading code was
+broken, so you’d see only the default frequencies.
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_8"></a>F.4. Release Notes for Version 1.8</h2></div></div></div><p>Version 1.8 includes support for our new TeleBT v4.0 ground
+station, updates for data analysis in our ground station
+software and bug fixes in in the flight software for all our
+boards and ground station interfaces.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_4"></a>F.4.1. AltOS</h3></div></div></div><p>AltOS New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Add support for TeleBT v4.0 boards.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_4"></a>F.4.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Add support for TeleBT v4.0 hardware
+</li><li class="listitem">
+Rewrite graphing and export functions. This code now handles
+each data series separately so that graphs are drawn
+correctly. Smoothing now uses a filter that looks both
+forward and backwards in time to make computed speed and
+acceleration data more accurate.
+</li></ul></div><p>AltosUI Bug Fixes</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Correct axis labeling of magnetic sensor in TeleMega and
+EasyMega. The Y and Z axes were flipped.
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_7"></a>F.5. Release Notes for Version 1.7</h2></div></div></div><p>Version 1.7 includes support for our new TeleMini v3.0
+flight computer and bug fixes in in the flight software for all our boards
+and ground station interfaces.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_5"></a>F.5.1. AltOS</h3></div></div></div><p>AltOS New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Add support for TeleMini v3.0 boards.
+</li></ul></div><p>AltOS Fixes</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Fix interrupt priorities on STM32L processors. Run timer
+interrupt at lowest priority so that device interrupts get
+serviced first.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_5"></a>F.5.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI New Features</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Add support for TeleMini v3.0 hardware
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_8"></a>F.6. Release Notes for Version 1.6.8</h2></div></div></div><p>Version 1.6.8 fixes a TeleMega and TeleMetrum v2.0 bug where
+the device could stop logging data and transmitting
+telemetry in flight. All TeleMega v1.0, v2.0 and TeleMetrum
+v2.0 users should update their flight firmware.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_6"></a>F.6.1. AltOS</h3></div></div></div><p>AltOS fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Fix STM32L DMA driver to work around STM32L SoC DMA priority
+issue t lock-up in the logging or radio code, either of
+which could stop data logging and telemetry.
+</li><li class="listitem">
+Avoid having TeleBT battery status values smash telemetry
+packet data by holding a lock during both operations.
+</li><li class="listitem">
+Don’t start reporting <span class="emphasis"><em>flight 0</em></span> when the log fills in
+flight.
+</li></ul></div><p>AltOS changes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Flash LEDS on all products briefly during power up so that
+they can be tested during production.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_telegps_and_altosdroid_applications"></a>F.6.2. AltosUI, TeleGPS and AltosDroid Applications</h3></div></div></div><p>AltosUI fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Re-enable go/no-go entries after they’ve been disabled due
+to lack of data. If telemetry information is delayed when
+the Ui starts up, sometimes important fields would get
+disabled to never re-appear.
+</li><li class="listitem">
+Deal with ground station failure better during Configure
+Ground Station operation by cleaning up pending operations.
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_5"></a>F.7. Release Notes for Version 1.6.5</h2></div></div></div><p>Version 1.6.5 fixes a TeleMega and TeleMetrum v2.0 bug where
+the device would often stop logging data and transmitting
+telemetry in flight. All TeleMega v1.0, v2.0 and TeleMetrum
+v2.0 users should update their flight firmware.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_7"></a>F.7.1. AltOS</h3></div></div></div><p>AltOS fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Fix STM32L SPI driver to prevent lock-up in the logging or
+radio code, either of which could stop data logging and
+telemetry. Found and characterized by Chuck Haskin, who also
+tested the new firmware before release.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_telegps_and_altosdroid_applications_2"></a>F.7.2. AltosUI, TeleGPS and AltosDroid Applications</h3></div></div></div><p>AltosUI fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Deliver firmward for TeleMega v2.0 and TeleBT v3.0 with
+Windows package.
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_4"></a>F.8. Release Notes for Version 1.6.4</h2></div></div></div><p>Version 1.6.4 fixes a bluetooth communication problem with
+TeleBT v1.0 devices, along with some altosui and altosdroid
+minor nits. It also now ships firmware for some newer devices.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_8"></a>F.8.1. AltOS</h3></div></div></div><p>AltOS fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Fix hardware flow control on TeleBT v1.0. Hardware RTS/CTS
+doesn’t seem to work, switch from using the hardware to
+driving these pins with software.
+</li><li class="listitem">
+Fix ARM USB drivers to deal with OS restarts. Needed to
+reset all USB-related state when the USB bus is reset. These
+fixes affect all STM32L, STM32F0 and LPC11U14 based devices.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_telegps_and_altosdroid_applications_3"></a>F.8.2. AltosUI, TeleGPS and AltosDroid Applications</h3></div></div></div><p>AltosUI, TeleGPS and AltosDroid New Features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Automatically switch from meters or feet to kilometers or
+miles for distance units.
+</li><li class="listitem">
+Add Monitor Idle mode to TeleGPS application.
+</li></ul></div><p>AltosUI, TeleGPS and AltosDroid Fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Abort map preloading when the preload map dialog is closed.
+</li><li class="listitem">
+In AltosDroid, Don’t reconnect to last device if the user
+had disconnected it the last time the application was
+active.
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_documentation"></a>F.8.3. Documentation</h3></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+Mention TeleMega v2.0 in hardware specs table.
+</li><li class="listitem">
+Document TeleGPS RF output in telegps manual.
+</li></ul></div></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_3"></a>F.9. Release Notes for Version 1.6.3</h2></div></div></div><p>Version 1.6.3 adds idle mode to AltosDroid and has bug fixes
for our host software on desktops, laptops an android devices
-along with BlueTooth support for Windows.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos
"></a>F.1.1. AltOS</h3></div></div></div><p>AltOS fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+along with BlueTooth support for Windows.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos
_9"></a>F.9.1. AltOS</h3></div></div></div><p>AltOS fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Fix hardware flow control on TeleBT v3.0. RTS/CTS is
wired backwards on this board, switch from using the
hardware to driving these pins with software.
-</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications
"></a>F.1.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI and TeleGPS New Features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications
_6"></a>F.9.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI and TeleGPS New Features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Add BlueTooth support for Windows operating system. This
supports connections to TeleBT over BlueTooth rather than
just USB.
</li><li class="listitem">
Fix acceleration data presented in MonitorIdle mode for
TeleMetrum v2.0 flight computers.
-</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosdroid"></a>F.
1.3. AltosDroid</h3></div></div></div><p>AltosDroid new features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosdroid"></a>F.
9.3. AltosDroid</h3></div></div></div><p>AltosDroid new features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Monitor Idle mode. Check state of flight computer while in
idle mode over the radio link
</li><li class="listitem">
application. This finally allows you to safely stop and
restart the application without losing the last known
location of any tracker.
-</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_documentation
"></a>F.1.4. Documentation</h3></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_documentation
_2"></a>F.9.4. Documentation</h3></div></div></div><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Document TeleMega and EasyMega additional pyro channel
continuity audio alert pattern.
-</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_2"></a>F.
2. Release Notes for Version 1.6.2</h2></div></div></div><p>Version 1.6.2 includes support for our updated TeleMega v2.0
+</li></ul></div><p></p></div></div><div class="section"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="_release_notes_for_version_1_6_2"></a>F.
10. Release Notes for Version 1.6.2</h2></div></div></div><p>Version 1.6.2 includes support for our updated TeleMega v2.0
product and bug fixes in in the flight software for all our boards
-and ground station interfaces.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_
2"></a>F.2.1. AltOS</h3></div></div></div><p>AltOS New Features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+and ground station interfaces.</p><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altos_
10"></a>F.10.1. AltOS</h3></div></div></div><p>AltOS New Features:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Add support for TeleMega v2.0 boards.
</li><li class="listitem">
Add PWM servo driver. There’s no higher level code using
</li></ul></div><p>AltOS Fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Slow down telemetry packets to allow receiver to keep
up.
-</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_
2"></a>F.2.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI and TeleGPS Fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_altosui_and_telegps_applications_
7"></a>F.10.2. AltosUI and TeleGPS Applications</h3></div></div></div><p>AltosUI and TeleGPS Fixes:</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
Fix post-flight orientation computation when processing
TeleMega and EasyMega eeprom data files.
</li><li class="listitem">
Capture complete eeprom data even when there are invalid
entries in the data. This keeps reading eeprom contents and
writing the associated .eeprom file when an error is detected.
-</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_documentation_
2"></a>F.2.3. Documentation</h3></div></div></div><p>We spent a bunch of time trying to improve our documentation</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
+</li></ul></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="_documentation_
3"></a>F.10.3. Documentation</h3></div></div></div><p>We spent a bunch of time trying to improve our documentation</p><div class="itemizedlist"><ul class="itemizedlist" style="list-style-type: disc; "><li class="listitem">
HTML versions now have a table of contents on the left side.
</li><li class="listitem">
EasyMini now has its own shorter manual.
projects / web / altusmetrum / blobdiff