+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#define HAS_TASK_QUEUE 1
+
+/* 8MHz High speed external crystal */
+#define AO_HSE 8000000
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL 12
+#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz (no need to go faster than CPU) */
+#define AO_PLLDIV 3
+#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHz (CPU clock) */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at 16MHz (HCLK/2) */
+#define AO_APB1_PRESCALER 2
+#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+/* Run APB2 at 16MHz (HCLK/2) */
+#define AO_APB2_PRESCALER 2
+#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
+
+#define HAS_SERIAL_1 1
+#define USE_SERIAL_1_STDIN 0
+#define SERIAL_1_PB6_PB7 1
+#define SERIAL_1_PA9_PA10 0
+
+#define HAS_SERIAL_2 1
+#define USE_SERIAL_2_STDIN 0
+#define SERIAL_2_PA2_PA3 1
+#define SERIAL_2_PD5_PD6 0
+
+#define HAS_SERIAL_3 0
+#define USE_SERIAL_3_STDIN 0
+#define SERIAL_3_PB10_PB11 0
+#define SERIAL_3_PC10_PC11 1
+#define SERIAL_3_PD8_PD9 0
+
+#define ao_gps_getchar ao_serial2_getchar
+#define ao_gps_putchar ao_serial2_putchar
+#define ao_gps_set_speed ao_serial2_set_speed
+#define ao_gps_fifo (ao_stm_usart2.rx_fifo)
+
+#define HAS_EEPROM 0
+#define USE_INTERNAL_FLASH 0
+#define HAS_USB 1
+#define HAS_BEEP 0
+#define HAS_RADIO 0
+#define HAS_TELEMETRY 0
+
+#define HAS_SPI_1 0
+#define SPI_1_PA5_PA6_PA7 0
+#define SPI_1_PB3_PB4_PB5 0
+#define SPI_1_PE13_PE14_PE15 0
+
+#define HAS_SPI_2 1
+#define SPI_2_PB13_PB14_PB15 1 /* CC115L */
+#define SPI_2_PD1_PD3_PD4 0
+#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
+
+#define SPI_2_PORT (&stm_gpiob)
+#define SPI_2_SCK_PIN 13
+#define SPI_2_MISO_PIN 14
+#define SPI_2_MOSI_PIN 15
+
+#define HAS_I2C_1 0
+#define I2C_1_PB8_PB9 1
+
+#define HAS_I2C_2 0
+#define I2C_2_PB10_PB11 1
+
+#define PACKET_HAS_SLAVE 0
+#define PACKET_HAS_MASTER 0
+
+#define LOW_LEVEL_DEBUG 0
+
+#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN
+#define LED_PORT_0 (&stm_gpioa)
+#define LED_PORT_0_MASK (0xff)
+#define LED_PORT_0_SHIFT 0
+#define LED_PIN_RED 0
+#define LED_PIN_GREEN 2
+#define AO_LED_RED (1 << LED_PIN_RED)
+#define AO_LED_GREEN (1 << LED_PIN_GREEN)
+
+#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
+
+#define HAS_GPS 0
+#define HAS_FLIGHT 0
+#define HAS_ADC 0
+#define HAS_LOG 0
+
+/*
+ * Telemetry monitoring
+ */
+#define HAS_MONITOR 0
+#define LEGACY_MONITOR 0
+#define HAS_MONITOR_PUT 0
+#define AO_MONITOR_LED AO_LED_GREEN
+
+/*
+ * Radio (cc115)
+ */
+
+/* gets pretty close to 434.550 */
+
+#define AO_RADIO_CAL_DEFAULT 0x6ca333
+
+#define AO_FEC_DEBUG 0
+#define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
+#define AO_CC1120_SPI_CS_PIN 0
+#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
+#define AO_CC1120_SPI stm_spi2
+
+#define AO_CC1120_INT_PORT (&stm_gpioc)
+#define AO_CC1120_INT_PIN 13
+
+#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioc)
+#define AO_CC1120_MCU_WAKEUP_PIN (0)
+
+#define AO_CC1120_INT_GPIO 2
+#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO 3
+#define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3
+
+/*
+ * Profiling Viterbi decoding
+ */
+
+#ifndef AO_PROFILE
+#define AO_PROFILE 0
+#endif
+
+#endif /* _AO_PINS_H_ */