+/*
+ * Copyright © 2019 Bdale Garbee <bdale@gag.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <ao.h>
+#include "ao_ads124s0x.h"
+
+#define DEBUG_LOW 1
+#define DEBUG_HIGH 2
+
+#define DEBUG 0
+
+#if DEBUG
+#define PRINTD(l, ...) do { if (DEBUG & (l)) { printf ("\r%5u %s: ", ao_tick_count, __func__); printf(__VA_ARGS__); flush(); } } while(0)
+#else
+#define PRINTD(l,...)
+#endif
+
+struct ao_ads124s0x_sample ao_ads124s0x_current;
+
+static void
+ao_ads124s0x_start(void) {
+ ao_spi_get_bit(AO_ADS124S0X_SPI_CS_PORT,
+ AO_ADS124S0X_SPI_CS_PIN,
+ AO_ADS124S0X_SPI_BUS,
+ AO_ADS124S0X_SPI_SPEED);
+}
+
+static void
+ao_ads124s0x_stop(void) {
+ ao_spi_put_bit(AO_ADS124S0X_SPI_CS_PORT,
+ AO_ADS124S0X_SPI_CS_PIN,
+ AO_ADS124S0X_SPI_BUS);
+}
+
+/*
+static uint8_t
+ao_ads124s0x_reg_read(uint8_t addr)
+{
+ uint8_t d[2];
+
+ d[0] = addr | AO_ADS124S0X_RREG;
+ d[1] = 0;
+ ao_ads124s0x_start();
+ ao_spi_duplex(d, d, 2, AO_ADS124S0X_SPI_BUS);
+ ao_ads124s0x_stop();
+
+ PRINTD(DEBUG_LOW, "read %x = %x\n", addr, d);
+
+ return d[1];
+}
+
+static void
+ao_ads124s0x_reg_write(uint8_t addr, uint8_t value)
+{
+ uint8_t d[3];
+
+ PRINTD(DEBUG_LOW, "write %x %x\n", addr, value);
+ d[0] = addr | AO_ADS124S0X_WREG;
+ d[1] = 0;
+ d[2] = value;
+ ao_ads124s0x_start();
+ ao_spi_send(d, 3, AO_ADS124S0X_SPI_BUS);
+ ao_ads124s0x_stop();
+
+#if DEBUG & DEBUG_LOW
+ d[0] = addr | AO_ADS124S0X_RREG
+ d[1] = 0;
+ ao_ads124s0x_start();
+ ao_spi_duplex(d, d, 2, AO_ADS124S0X_SPI_BUS);
+ ao_ads124s0x_stop();
+ PRINTD(DEBUG_LOW, "readback %x %x\n", d[0], d[1]);
+#endif
+}
+*/
+
+// FIXME
+// We need to be in continuous conversion mode, and use the WREG
+// command to set the next conversion input while reading each
+// which I don't see an example for elsewhere?
+
+static void
+ao_ads124s0x_setup(void)
+{
+ uint8_t d[20];
+
+/* we have nowhere to report this error to since ao_sensor_errors is
+ normally part of ao_flight?
+
+ uint8_t devid = ao_ads124s0x_reg_read(AO_ADS124S0X_ID);
+ if (devid != AO_ADS124S0X_ID_ADS124S06)
+ ao_sensor_errors = 1;
+*/
+
+ /* 1ksps each across 4 inputs using full duplex ala 9.5.4.3 */
+
+ d[0] = AO_ADS124S0X_INPMUX | AO_ADS124S0X_WREG;
+ d[1] = 8; /* write 8 registers starting with INPMUX */
+ d[2] = 0x0c; /* input mux AIN0 relative to AINCOM */
+ d[3] = 0x00; /* default first conversion delay, pga disabled */
+ d[4] = 0x1e; /* gchop disabled, internal clock, continuous
+ conversion, low-latency filter, 4000 SPS */
+ d[5] = 0x00; /* ref monitor disabled, ref buffers bypassed, ref
+ set to REFP0/REFN0, internal reference off */
+ d[6] = 0x00; /* pga otuput rail, low side power switch, excitation
+ current source all off */
+ d[7] = 0xff; /* idac1 and idac2 disconnected */
+ d[8] = 0x00; /* all vbias disconnected */
+ d[9] = 0x10; /* sys monitor off, spi timeout disabled, crc disabled,
+ prepending status byte disabled */
+ ao_ads124s0x_start();
+ ao_spi_send(d, 10, AO_ADS124S0X_SPI_BUS);
+ ao_ads124s0x_stop();
+
+ /* start conversions */
+
+ d[0] = AO_ADS124S0X_START;
+ ao_ads124s0x_start();
+ ao_spi_send(d, 1, AO_ADS124S0X_SPI_BUS);
+ ao_ads124s0x_stop();
+}
+
+static void
+ao_ads124s0x(void)
+{
+ ao_ads124s0x_setup();
+/*
+ for (;;) {
+ ao_ads124s0x_value(&ao_ads124s0x_current);
+ ao_arch_critical(
+ AO_DATA_PRESENT(AO_DATA_ADS124S0X);
+ AO_DATA_WAIT();
+ );
+ }
+*/
+}
+
+static struct ao_task ao_ads124s0x_task;
+
+static void
+ao_ads124s0x_dump(void) // FIXME
+{
+ printf ("ADS124S0X value %d %d %d %d\n",
+ ao_ads124s0x_current.ain0,
+ ao_ads124s0x_current.ain1,
+ ao_ads124s0x_current.ain2,
+ ao_ads124s0x_current.ain3);
+}
+
+const struct ao_cmds ao_ads124s0x_cmds[] = {
+ { ao_ads124s0x_dump, "I\0Display ADS124S0X data" },
+ { 0, NULL },
+};
+
+void
+ao_ads124s0x_init(void)
+{
+ ao_cmd_register(ao_ads124s0x_cmds);
+ ao_spi_init_cs(AO_ADS124S0X_SPI_CS_PORT,
+ (1 << AO_ADS124S0X_SPI_CS_PIN));
+
+ ao_add_task(&ao_ads124s0x_task, ao_ads124s0x, "ads124s0x");
+}