doc: Update docs to reference TeleMetrum v3 where appropriate

[fw/altos] / doc / updating-firmware.inc

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index ee2f5e9a340b8fb83ed5876bd4141eb19470fdb3..b1047ffa645db07bb20ce7536905f82d6207b6b4 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -2,7 +2,7 @@
 == Updating Device Firmware
 
        ifdef::telemega[]
 == Updating Device Firmware
 
        ifdef::telemega[]

-       TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+       TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3

        are all
        endif::telemega[]
        ifndef::telemega[]
        are all
        endif::telemega[]
        ifndef::telemega[]


@@ -28,7 +28,7 @@
 
        ifdef::telemega[]
 
 
        ifdef::telemega[]
 

-       === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+       === Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware

 
        endif::telemega[]
        ifndef::telemega[]
 
        endif::telemega[]
        ifndef::telemega[]


@@ -106,7 +106,7 @@
                        endif::easymega[]
 
                        ifdef::telemetrum[]
                        endif::easymega[]
 
                        ifdef::telemetrum[]

-                       TeleMetrum v2::
+                       TeleMetrum v2 and newer::

 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad


@@ -128,6 +128,18 @@
                        the one on the other end of the row.
                        endif::easymini[]
 
                        the one on the other end of the row.
                        endif::easymini[]
 

+                       TeleGPS v1::
+
+                       Connect pin 32 on the CPU to ground.  Pin 32 is the
+                       right-most pin on the bottom edge of the CPU when the
+                       board is oriented with the USB and battery connectors
+                       to the right.
+
+                       TeleGPS v2::
+
+                       Connect together pins 1 and 5 of the Debug connector.
+                       Pin 1 is the pin with the square pad around the hole.
+

                        ifdef::telemetrum[]
                        TeleDongle v3::
 
                        ifdef::telemetrum[]
                        TeleDongle v3::
 


@@ -136,6 +148,13 @@
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        

+                       TeleBT v3::
+
+                       Connect pin 4 on the CPU to 3.3V, which can be done by
+                       connecting pin 1 to pin 4.  Pin 1 is the left pin on
+                       the lower edge of the chip when the unit is oriented
+                       such that the SMA is at the top.
+

                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th
                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th