projects
/
fw
/
altos
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
altoslib: Document how to add a new product
[fw/altos]
/
doc
/
telemetrum.inc
diff --git
a/doc/telemetrum.inc
b/doc/telemetrum.inc
index 7c9dadb58e9c2a4488b1a0881b373b1704795f57..fdb961d7c061923ba84979cccce60d8694d25495 100644
(file)
--- a/
doc/telemetrum.inc
+++ b/
doc/telemetrum.inc
@@
-1,10
+1,10
@@
== TeleMetrum
.TeleMetrum v2 Board
== TeleMetrum
.TeleMetrum v2 Board
- image::telemetrum-v2.0-th.jpg[width=
"5.5in"
]
+ image::telemetrum-v2.0-th.jpg[width=
400
]
.TeleMetrum v1 Board
.TeleMetrum v1 Board
- image::telemetrum-v1.1-thside.jpg[width=
"5.5in"
]
+ image::telemetrum-v1.1-thside.jpg[width=
400
]
TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to
fit inside coupler for 29mm air-frame tubing, but using it in a tube that
TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to
fit inside coupler for 29mm air-frame tubing, but using it in a tube that
@@
-18,7
+18,7
@@
bay for TeleMetrum should have at least 10 inches of interior length.
There are two generations of the TeleMetrum design. The
bay for TeleMetrum should have at least 10 inches of interior length.
There are two generations of the TeleMetrum design. The
- major changes
in the v2
generation are:
+ major changes
after v1
generation are:
* uBlox GPS chip certified for altitude records
* uBlox GPS chip certified for altitude records
@@
-39,15
+39,15
@@
.TeleMetrum Screw Terminals
[options="header",grid="all",cols="2,3,10"]
.TeleMetrum Screw Terminals
[options="header",grid="all",cols="2,3,10"]
- |===
======================
+ |===
|Terminal #|Terminal Name|Description
|1 |Switch Output |Switch connection to flight computer
|2 |Switch Input |Switch connection to positive battery terminal
|Terminal #|Terminal Name|Description
|1 |Switch Output |Switch connection to flight computer
|2 |Switch Input |Switch connection to positive battery terminal
- |3 |Main +
|Main pyro channel common connection to battery
+
+ |3 |Main +
++ |Main pyro channel common connection to battery ++
+
|4 |Main - |Main pyro channel connection to pyro circuit
|4 |Main - |Main pyro channel connection to pyro circuit
- |5 |Apogee +
|Apogee pyro channel common connection to battery
+
+ |5 |Apogee +
++ |Apogee pyro channel common connection to battery ++
+
|6 |Apogee - |Apogee pyro channel connection to pyro circuit
|6 |Apogee - |Apogee pyro channel connection to pyro circuit
- |===
=====================
+ |===
=== Using a Separate Pyro Battery with TeleMetrum
=== Using a Separate Pyro Battery with TeleMetrum
@@
-62,14
+62,15
@@
stranded, into the GND hole just above the screw terminal
strip and solder it in place.
stranded, into the GND hole just above the screw terminal
strip and solder it in place.
- Connecting the positive battery terminal to the pyro
+ Connecting the
switched
positive battery terminal to the pyro
charges must be done separate from TeleMetrum, by soldering
charges must be done separate from TeleMetrum, by soldering
- them together or using some other connector.
-
+ them together or using some other connector. Note that you
+ must include a switch in the positive lead from the pyro
+ battery for safety!
The other lead from each pyro charge is then inserted into
The other lead from each pyro charge is then inserted into
- the appropriate per-pyro channel screw terminal (terminal 4
for the
- Main charge, terminal 6 for the Apogee charge).
+ the appropriate per-pyro channel screw terminal (terminal 4
+
for the
Main charge, terminal 6 for the Apogee charge).
=== Using an Active Switch with TeleMetrum
=== Using an Active Switch with TeleMetrum