altos: Initialize pyro code for easytimer-v1

[fw/altos] / doc / telemetrum.inc

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index 3247db9553e214dd3d00c15966433380ba29788f..7ef9876f6439eeff0dc91b5d011df7a2d1a9fa31 100644 (file)
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -62,14 +62,15 @@
                stranded, into the GND hole just above the screw terminal
                strip and solder it in place.
 
                stranded, into the GND hole just above the screw terminal
                strip and solder it in place.
 

-               Connecting the positive battery terminal to the pyro
+               Connecting the switched positive battery terminal to the pyro

                charges must be done separate from TeleMetrum, by soldering
                charges must be done separate from TeleMetrum, by soldering

-               them together or using some other connector.
-
+               them together or using some other connector. Note that you 
+               must include a switch in the positive lead from the pyro 
+               battery for safety!

 
                The other lead from each pyro charge is then inserted into
 
                The other lead from each pyro charge is then inserted into

-               the appropriate per-pyro channel screw terminal (terminal 4 for the
-               Main charge, terminal 6 for the Apogee charge).
+               the appropriate per-pyro channel screw terminal (terminal 4 
+               for the Main charge, terminal 6 for the Apogee charge).

 
        === Using an Active Switch with TeleMetrum
 
 
        === Using an Active Switch with TeleMetrum