projects
/
fw
/
altos
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
altos/stm: Minor cleanups in ao_arch_funcs.h
[fw/altos]
/
doc
/
telelaunch-configuration.inc
diff --git
a/doc/telelaunch-configuration.inc
b/doc/telelaunch-configuration.inc
index 0e553405ba6ad2f3373e2204f911567c3bd38962..a24776331a09818cece9e6cdfb77b7e78a1a0ec0 100644
(file)
--- a/
doc/telelaunch-configuration.inc
+++ b/
doc/telelaunch-configuration.inc
@@
-1,6
+1,6
@@
== Configuration
== Configuration
- There are
3
things you need to configure identically in each unit
+ There are
three
things you need to configure identically in each unit
that is part of a TeleLaunch system for wireless communications to
succeed. Those are the operating frequency, the callsign, and a key
for the AES encryption algorithm. Additionally, each TeleFire unit
that is part of a TeleLaunch system for wireless communications to
succeed. Those are the operating frequency, the callsign, and a key
for the AES encryption algorithm. Additionally, each TeleFire unit
@@
-59,9
+59,13
@@
memory. For example, the default 435.750 MHz would be
configured using
memory. For example, the default 435.750 MHz would be
configured using
- c
f
435750 +
+ c
F
435750 +
c w
c w
+ Note that the 'f' parameter is a frequency calibration value
+ that you really, really, really don't want to change. So,
+ please be careful to make sure you use capital 'F', not lower
+ case 'f' when changing the operating frequency!
=== Callsign
=== Callsign
@@
-115,7
+119,7
@@
Each TeleFire unit needs to be configured with a bank number,
and bank numbers should be unique within a given system. For
Each TeleFire unit needs to be configured with a bank number,
and bank numbers should be unique within a given system. For
- most systems with 8 or
less
banks, just use the DIP switch
+ most systems with 8 or
fewer
banks, just use the DIP switch
on the circuit board inside the TeleFire unit to select the
desired bank. Only one switch should be turned on. Switch
one means bank one, etc.
on the circuit board inside the TeleFire unit to select the
desired bank. Only one switch should be turned on. Switch
one means bank one, etc.