have an
accelerometer we can use to determine orientation, “idle” mode
is selected if the board is connected via USB to a computer,
otherwise the board enters “flight” mode.
ifdef::telemini[]
have an
accelerometer we can use to determine orientation, “idle” mode
is selected if the board is connected via USB to a computer,
otherwise the board enters “flight” mode.
ifdef::telemini[]
mode for requests sent via TeleDongle. Commands can be issued
in idle mode over either USB or the radio link
equivalently.
mode for requests sent via TeleDongle. Commands can be issued
in idle mode over either USB or the radio link
equivalently.
endif::radio[]
Idle mode is useful for configuring the altimeter, for
extracting data from the on-board storage chip after
endif::radio[]
Idle mode is useful for configuring the altimeter, for
extracting data from the on-board storage chip after
means you need to know the TeleMini radio configuration values
or you won't be able to communicate with it. For situations
means you need to know the TeleMini radio configuration values
or you won't be able to communicate with it. For situations
- when you don't have the radio configuration values, TeleMini v1.0
- offers an 'emergency recovery' mode. In this mode, TeleMini is
+ when you don't have the radio configuration values,
+ TeleMini v1.0
+ offers an 'emergency recovery' mode. In this mode,
+ TeleMini v1.0 is
Any operation which can be performed with a flight computer can
either be done with the device directly connected to the
computer via the USB cable, or through the radio
Any operation which can be performed with a flight computer can
either be done with the device directly connected to the
computer via the USB cable, or through the radio
always communicated with over radio. Select the appropriate
TeleDongle device when the list of devices is presented and
AltosUI will interact with an altimeter over the radio link.
always communicated with over radio. Select the appropriate
TeleDongle device when the list of devices is presented and
AltosUI will interact with an altimeter over the radio link.