projects
/
fw
/
altos
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
update info on using separate pyro batteries to encourage including a switch
[fw/altos]
/
doc
/
easymini-device.inc
diff --git
a/doc/easymini-device.inc
b/doc/easymini-device.inc
index fb2b6098879f9b95f66f14ca94dbcae4e32bd827..b7af82f2ee8f28506e650c454cff7d3afe289cc5 100644
(file)
--- a/
doc/easymini-device.inc
+++ b/
doc/easymini-device.inc
@@
-1,7
+1,7
@@
== EasyMini
.EasyMini Board
== EasyMini
.EasyMini Board
- image::easymini-top.jpg[width=
"5.5in"
]
+ image::easymini-top.jpg[width=
400
]
EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
designed to fit in a 24mm coupler tube.
EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
designed to fit in a 24mm coupler tube.
@@
-94,9
+94,11
@@
ground, connect it to the negative external battery
connection, top terminal 4.
ground, connect it to the negative external battery
connection, top terminal 4.
- Connecting the positive battery terminal to the pyro
+ Connecting the
switched
positive battery terminal to the pyro
charges must be done separate from EasyMini, by soldering
charges must be done separate from EasyMini, by soldering
- them together or using some other connector.
+ them together or using some other connector. Note that for
+ safety, you should put a switch between the pyro battery and
+ the rest of the circuit!
The other lead from each pyro charge is then inserted into
the appropriate per-pyro channel screw terminal (top
The other lead from each pyro charge is then inserted into
the appropriate per-pyro channel screw terminal (top