- The TeleMini battery can be charged by disconnecting it from the
- TeleMini board and plugging it into a standalone battery charger
- such as the LipoCharger product included in TeleMini Starter Kits,
- and connecting that via a USB cable to a laptop or other USB
- power source.
+ TeleMetrum v2.0 and TeleMega use a higher power battery charger,
+ allowing them to charge the battery while running the board at
+ maximum power. When the battery is charging, or when the board
+ is consuming a lot of power, the red LED will be lit. When the
+ battery is fully charged, the green LED will be lit. When the
+ battery is damaged or missing, both LEDs will be lit, which
+ appears yellow.
+ </para>
+ <para>
+ The Lithium Polymer TeleMini and EasyMini battery can be charged by
+ disconnecting it from the board and plugging it into a
+ standalone battery charger such as the LipoCharger product
+ included in TeleMini Starter Kits, and connecting that via a USB
+ cable to a laptop or other USB power source.
+ </para>
+ <para>
+ You can also choose to use another battery with TeleMini v2.0
+ and EasyMini, anything supplying between 4 and 12 volts should
+ work fine (like a standard 9V battery), but if you are planning
+ to fire pyro charges, ground testing is required to verify that
+ the battery supplies enough current.