+altos (1.6.3-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Releasing: Copy TeleMega v2.0 bits to Binaries
+ * src/chaoskey-v0.1: Add HV enable support
+ * altos/chaoskey: Add support for flipping between raw and cooked bits
+ * altos/chaoskey: Delay ADC reading for 250ms at startup
+ * altos: remove blank line in stmf0/ao_timer.c
+ * altos/stmf0: Allow projects to specify non-default stack size
+ * altos: Add power management APIs
+ * altos/stmf0: Add suspend/resume support
+ * altos: Allow USB drivers to skip CDC-ACM -specific descriptors
+ * altos: Add power management to TRNG driver
+ * altos/chaoskey-v0.1: Add power management and change USB classes
+ * altos: Delay TRNG ADC long enough for HV supply to stabilize
+ * altos: Add simple stats test to TRNG code
+ * altos/stmf0: Add missing ao_gpio.c
+ * altos: Another fix for non CDC-ACM devices
+ * altos/stmf0: Fix location of device_id register
+ * altos/chaoskey: Encode both hardware and software versions in product ID
+ * altos/stmf0: Use device ID as usb serial number if requested
+ * altos/chaoskey: Use SoC device ID as serial number
+ * altos/chaoskey: Add another USB endpoint to read raw data
+ * altos: Add ChaosKey v1.0 product
+ * ao-bringup: Switch to v1.0 for chaoskey
+ * ao-tools: Add ao-chaosread
+ * altos/stmf0: Fix build without second USB IN endpoint
+ * libaltos: jni_md.h moved to linux subdir in Java install
+ * libaltos: Add unistd.h to get defines for various syscalls
+ * altos: Expose fast timer API from kernel/
+ * Change how we detect and install java
+ * ao-tools/ao-dump-up: Remove spurious flight state strings
+ * ao-tools/lib: Remove trailing whitespace from ao-elf.c
+ * ao-tools/lib: Add ao_hex_image_cat function
+ * ao-tools: Add ao-makebin
+ * altos/stmf0: Construct .bin files for flash loaders
+ * ao-bringup: Use dfu-util to install flash loader on chaoskey
+ * libaltos: Add Windows BT support. Split into separate source files.
+ * altosui: Delay between polling for igniter status in Fire Igniters
+ * altosuilib: Note that Windows now supports Bluetooth
+ * libaltos: Fix warning in linux libaltos code
+ * altoslib: use env var LAUNCH_SITES to override default URL
+ * altosuilib: Control map debugging output with Serial.debug
+ * altosui,telegps: Do not allow radio calibration to be edited
+ * altos/stm: Run scheduler code on interrupt stack
+ * altos/stm: Validate current task SP in interrupt by looking at PSP
+ * altos/stm: Allow apps to define different stack size
+ * altos/lpc: Add fast timer
+ * altos: Add one-byte SPI output routine for LPC and STM cores
+ * altos: Allow for flight hardware without any ADC values
+ * altos: Add Detherm log format (easymini without ADC)
+ * altos: Use mini logging for detherm, just without ADC
+ * altos/stmf0: Add SPI driver.
+ * altos/stmf0: Support HPE clock source
+ * doc: Note that EasyMega and TeleMega report A-D continuity
+ * altos: Add detherm product
+ * altos/stmf0: Add pwm and exti drivers
+ * altos: Add ao_gpi_set/clr_bits functions
+ * altos: Add easy mini plotting helper in test code
+ * altos/detherm: Add ms5607 to detherm
+ * altos/detherm: Add servo driver
+ * altos: Support telefire products in cc1200 driver
+ * altos: Add pad support for new telefire versions
+ * altos: telefiretwo-v0.1 bits
+ * altos: Allow for pad boxes with different sensor configurations
+ * altos: Support pad/lco boxes with fixed box numbers
+ * altos: Add TeleLCOTwo firmware
+ * altos: Fix telefiretwo .gitignore
+ * altos: Add ao_lco_two.c; alternate LCO interface code
+ * altos: Use simpler debounce logic for buttons
+ * altos/telelcotwo: Add idle timeout
+ * Add TeleFireTwo v0.2 project
+ * altos/stmf0: Fix external interrupts
+ * altos/telefiretwo-v0.2: Change alarm names in comment
+ * altosdroid: Don't set target location if lat/lon is MISSING
+ * altoslib: Add debugging to AltosPreferences.state() etc
+ * altoslib: Make AltosGPSSat implement Serializable
+ * altoslib: switch from keySet() to keys() in altos map tiles
+ * altos: avoid mixed declarations and code in ao_task.c
+ * Update java library version numbers
+ * AltosDroid play store keys have moved, update configure.ac
+ * Prepare for new Android release by updating version number
+ * libaltos: Fix for Mac OS X El Capitan
+ * Add preliminary 1.6.3 release notes
+ * altosdroid: Can only use message once
+ * Bump version to 1.6.3
+ * altosdroid: Track device location in app, not telemetry service
+ * altosdroid: Redraw offline map when my location changes
+ * altosdroid: Run even without Bluetooth
+ * altoslib: Use feet per second for imperial speed
+ * altoslib: Report exceptions caught while opening launch sites URL
+ * altoslib: Don't try to drag lines around until map is loaded
+ * Debug bits for telebt
+ * altos: Use TXE instead of TC for serial on STM32l
+ * altos/stm32l: Add support for software-driven HW flow control
+ * altos/telebt-v3.0: Flip CTS/RTS pins for BT module
+ * altos: Clear packet queue when starting packet master
+ * altosdroid: Add idle mode monitoring, reboot. Start igniters
+ * altosdroid: Split setup functions to separate dialog
+ * Fix key in AndroidManifest.xml.in
+ * altosdroid: Add configurable frequency set
+ * altoslib: Make AltosPreferencesBackend abstract. Add set/put Serializable
+ * doc: Add idle mode info to 1.6.3 release note
+ * Revert "altos/stm: Run scheduler code on interrupt stack"
+ * altosdroid: max height is a height, not a speed
+ * altoslib: Correct stats for flights without a real landing
+ * altoslib: Flush during set_state. Don't store listener state.
+ * publish AltosDroid in keithp-fat target
+ * altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted
+ * altos: Make sure AO_MMA655X_INVERT is declared where needed
+ * doc: Update AltosDroid chapter for 1.6.3
+ * doc: 1.6.3 release notes note TeleBT rts/cts and TM 2.0 monitor idle fixes
+ * micropeak: Change order of windows install so that java detect works
+ * altoslib: Fix map preloading callbacks, run in separate thread
+ * windows: Change install to look for browser in a different place
+ * Ignore some built files for 1.6.3
+
+ [ Robert Garbee ]
+ * fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work
+
+ [ Bart Massey ]
+ * Clean up stmf0 adc init.
+ * altos: Fixed timing of panic display LED to be readable
+
+ [ Justin Vreeland ]
+ * Fix java class differing only by case
+
+ [ Bdale Garbee ]
+ * add beep to TeleMega turnon script
+ * releasing 1.6.3
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 06 May 2016 18:14:11 -0600
+
+altos (1.6.2-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * process updates from 1.6.1 release
+ * move turnon_teledongle to new cal-freq code
+ * add a paragraph about TeleBT battery charging to AltosDroid chapter in documentation
+ * turnon script for TeleBT v3.0
+ * apply wrap-and-sort to control files
+ * add automatic Bluetooth functionality check to turnon_telebt
+ * new build dependency on asciidoc
+ * now building for m4, too
+ * modify bringup scripts to handle TeleMega v2.0
+ * modify release procedure to reflect Keith setting version in confgure.ac
+ * submodule madness
+ * one more time, with feeling .. this time, I've updated pdclib
+ * update Changelog from git log
+
+ [ Keith Packard ]
+ * altoslib: Add companion telemetry data support
+ * ao-telem: Add companion packet telemetry data printing
+ * altos: Add HAS_COMPANION to new boards with companion connectors
+ * altos/telefire: No reply for ARMED. Ignore time for FIRE.
+ * altos: Provide direct segment driving interface for LCD displays
+ * altos/telelco: Infrastructure changes for drag racing
+ * altos/telelco: Add drag race UI
+ * altoslib: Hide 'state' member and use accessor function
+ * altoslib: Rotation off by factor of two
+ * altos/telelco: Adjust drag race UI
+ * altosdroid: Add minus sign and decimal point to lat/lon input fields
+ * altosuilib: In display thread, set new state synchronously
+ * altoslib: Make sure .eeprom download file is flushed on exception
+ * Bump release number to 1.6.1.1
+ * altoslib: Clean up remaining direct AltosState.state users
+ * altoslib: Keep downloading when a parse error occurs
+ * Create directory on keithp.com when uploading devel version
+ * telelco: Fix pad reset to one on radio signal loss
+ * doc: Force FOP to read images from doc directory
+ * doc: Start doc transition to asciidoc
+ * doc: Add asciidoc telemini v1.0
+ * doc: Lots more conversion from docbook to asciidoc
+ * doc: Add asciidoc version of altosui chapter.
+ * doc: Add asciidoc version of Altos Droid manual
+ * doc: Add updating firmware and using am products asciidoc bits
+ * doc: Add titles to all figures
+ * doc: Finish converting docs to asciidoc format
+ * doc: Convert AltOS doc to asciidoc
+ * doc: Convert telemetry and companion docs to asciidoc
+ * doc: Minor makefile cleanups
+ * doc: Switch to free fonts. Publish fonts with docs.
+ * doc: Place html book contents on left side of page with separate scrollbar
+ * doc: Split revhistory to separate file for html docs
+ * doc: Get images and tables all centered and labeled
+ * doc: Make pdf titles less ridiculously large
+ * doc: verbose mode for a2x
+ * altosui: telemini outline pdf changed name
+ * doc: Add product logos to books
+ * Break out common pieces from TeleGPS and AltusMetrum
+ * doc: Reformat 'Using MicroPeak' section
+ * doc: Provide more actual links instead of just chapter names
+ * doc: Move pad beeps table to usage chapter
+ * doc: Reformat html versions a bit
+ * doc: Split out EasyMini into a separate manual
+ * doc: Try a different trick for asciidoc build issues
+ * doc: Construct html index for documentation
+ * doc: Remove some bogus bits from am.css
+ * ao-tools/ao-dbg: Stop using sigvec
+ * altos: Add TeleMega v2.0, including PWM driver
+ * altos: Get stm32l pwm driver working
+ * altos: Set AO_PWM_TIMER_SCALE for telemega-v2.0
+ * Switch TeleMega v2.0 to CC1200 radio chip
+ * altos: Insert inter telemetry-packet delay
+ * Elide pyro channel information from EasyMini docs
+ * Elide flight computer info from APRS section of TeleGPS manual
+ * altoslib: Remove debug message from AltosMap
+ * Update java library versions
+ * Add release notes for 1.6.2
+ * altos: Set TeleMega v2.0 PWM to support servos
+ * altos: Switch PWM constants to end up exposing µsec
+ * Bump version to 1.6.2, altosdroid to 10
+ * doc: Update copyright year in altusmetrum doc
+ * doc: fix typo in using external active switch circuit section
+ * doc: Remove telemini v2.0. Add telemega v2.0
+ * doc: Remove extraneous 'first off' from legal paragraph
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 10 Jan 2016 19:11:18 -0700
+
+altos (1.6.1-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * swap names so v3.0 is the default TeleDongle version to turn on
+ * add debian branch spec to vcs-git: line in control so Debian tools work right
+ * changelog for 1.6.1 release
+
+ [ Tom Marble ]
+ * Minor typo in man page
+ * Added continuous output option to ao-usbtrng
+
+ [ Keith Packard ]
+ * altos/stmf0: Add ao_crc_stm.c
+ * altos: Replace ao_alarm/ao_clear_alarm with ao_sleep_for
+ * altosui: Run all igniter status requests from non-GUI thread
+ * altosuilib: Detect pair programming by product name, not USB id
+ * ao-bringup/turnon_telemini: Detect which programmer to use by $USER
+ * altos: embed ao_alarm and ao_clear_alarm in ao_sleep_for
+ * altos/cc1200: Adjust bit-sync configuration
+ * altos: Remove some accidental debug printfs from ao_packet.c
+ * ao-bringup: Changes for telebt for keith's hacking
+ * altosdroid: Lots of bluetooth connection changes
+ * altosdroid: Explicitly disconnect BT on termination or 'disconnect'
+ * altosdroid: Only speak when GUI is running
+ * altosdroid: Missing file: DeviceAddress.java
+ * altosdroid: Ignore automatic tab changing while activity is saved
+ * altos: Allow software to offer other USB interface classes than CDC
+ * altos/stmf0: Fix fast ADC interface
+ * altos/stmf0: Typo in ao_crc_stm.c
+ * altos/stmf0: Allocate USB buffers at startup
+ * altos: Create chaoskey product
+ * altos: Add chaoskey flash loader
+ * altos/usbtrng: Split out random number generating code to separate driver
+ * altos: Make APRS format (compressed/uncompressed) configurable
+ * altosui/telegps: Add config option for APRS format
+ * altoslib: Round frequency when configuring radio
+ * ao-tools: Add ao-flash-stm32f0x
+ * altos: Wait for BT disconnect before sending command
+ * altos: Missing pad field in TMv2 data packet
+ * altosui/telegps: Change from variable-units snuck into master
+ * altosdroid: Deal with bluetooth connection failures better
+ * doc: Update telemetry docs to include new packet formats
+ * altos: Add .gitignore for chaoskey
+ * altos: Build chaoskey by default
+ * altos: Add makefile for chaoskey flash loader
+ * altos/stmf0: Need ao_exti.h for pin configuration
+ * altosui: Add map to MonitorIdle display
+ * ao-tools/ao-mega: Clean up formatting of pyro status messages
+ * altos/test: Make aprs test code compile again
+ * altos/test: Support old telemega eeprom file formats in ao_flight_test
+ * ao-tools/ao-list: Show devices that have no TTY
+ * altos: Add the ability to configure a different USB vendor ID
+ * altos/chaoskey: Set USB VID/PID to 0x1d50/0x60c6
+ * altos/stmf0: Have fast ADC ring buffer code use wrap-around
+ * icon: Convert windows stub into launcher program
+ * windows: Use new windows stub to launch applications
+ * altosdroid: Add USB support for TeleDongle/TeleBT
+ * altosdroid: Fix tab label height problems
+ * altoslib: Use Locale.ROOT for KML export
+ * altoslib: Expose locale and non-locale floating point parsing functions
+ * altosui: Remove un-implemented --fetchmaps argument
+ * ao-dump-up: Add --wait option to make testing µPusb easier
+ * doc: Clarify what 'after motor' means
+ * altos: Support 32MHz xtal on cc1200
+ * microsplash: Add 'publish' target to Makefile
+ * micropeak: Use fast load mode by default in -load script
+ * Flip version to 1.6.0.2
+ * altoslib: Create display-independent map support code
+ * telefire: Make 'good' RSSI value configurable
+ * altos: Only set CMAC RSSI value on valid packet received
+ * telefire: Report telefire battery voltage over telemetry link
+ * altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)
+ * altos/telelco: Display telefire battery voltage
+ * altos/telelco: Show box voltage with pad knob instead of firing button
+ * altoslib: Build AltosVersion.java in configure.ac
+ * altoslib: Get new abstract mapping code compiling
+ * altoslib: More frobbing with new map bits
+ * altoslib/altosuilib: Update library version to 7
+ * altoslib/altosuilib: Get new Map display code running in altosui and telegps
+ * altosuilib: Add AltosUIImage.java
+ * altosuilib: Use new map code for map preload UI
+ * altosuilib: Remove old map bits
+ * altosuilib: Get rid of AltosUIVersion.java
+ * altosdroid: Add offline map tab
+ * altosdroid: Move pause before reopening bluetooth into connec thread
+ * altosdroid: Centralize debug printf code
+ * altosdroid: Place icons on screen instead of drawing path
+ * altoslib: Add AltosLaunchSite bits
+ * altosuilib: Use altoslib site list loader
+ * altoslib: Start with map empty
+ * altoslib: Provide toString method for AltosLatLon
+ * altoslib: Add map loading helper class
+ * altosuilib: Switch to altoslib map loading code
+ * altosuilib: Get rid of AltosUIMapNew.set_load_params
+ * altosuilib: Eliminate extra MapCache in AltosUIMapPreloadNew
+ * altoslib: Pass all map loader params to set_load_params
+ * altosdroid: Add map types and map preloading UIs
+ * altosdroid: Look for zipalign in the new place too
+ * altosdroid: Disable debug output on release builds
+ * altosdroid: Save selected map type in AltosDroid object
+ * altosdroid: Add 'Current Location' as an option when preloading maps
+ * altosdroid: Split out AltosMapView into separate file
+ * altosdroid: Missing call to super.onDetach from TabMapOffline
+ * altosdroid: use 'show' to set new tab contents in onResume
+ * altoslib: Require 'debug' hook in AltosMapInterface
+ * altosdroid: Switch from custom title to standard Holo theme
+ * altosdroid: Highlight age in red when older than 10 seconds
+ * ao-tools: Create ao-cal-freq
+ * ao-bringup: Use new ao-cal-freq program for cal-freq script
+ * ao-bringup: Do telegps freq cal before testing GPS
+ * ao-tools: Add missing ao-cal-freq man page
+ * altoslib: Add preferences for saving/restoring multiple flight states
+ * altosdroid: Add multi-tracker support
+ * altosdroid: Note recent changes
+ * altosdroid: Resource changes needed for multi-tracker mode
+ * altoslib: Set product for idle monitor
+ * altoslib: Let the application disable the link cancel dialog
+ * altoslib: Expose public function to set state.product
+ * altoslib: Remove debug output from AltosMap
+ * altosuilib: Show state.product if state.device_type isn't set
+ * altosuilib: Create grid-bag helper functions in AltosUIFrame
+ * micropeak: Update mac/windows FTDI drivers
+ * telegps: use new AltosUIFrame constraint helper
+ * ao-bringup: Fail turnon_easymega if accel cal fails
+ * ao-bringup: Use local versions of tools instead of /usr/bin for turnon_easymega
+ * ao-bringup: Make turnon_easymega run without 'make install'
+ * altoslib/altosuilib: Fix equals methods, add hashCode
+ * altoslib: Clean up map tile removal
+ * altosuilib: Allow for no transform in map mouse wheel function
+ * altosdroid: Switch trackers automatically when changing freq or baud
+ * altosdroid: Remove debug
+ * altosdroid: Support for sorting rockets by age
+ * altosdroid: Stack map markers with newest rocket on top
+ * altosdroid: Multiple tracker support for google maps
+ * altoslib: Add set_zoom_centre to AltosMap
+ * altosuilib: Use AltosMap set_zoom_centre instead of in-line version
+ * altosdroid: Use AltosMap set_zoom_centre
+ * altosdroid: Show receiver battery voltage in the 'pad' view
+ * altosdroid: Add map source preference
+ * altosdroid: Display online/offline maps in same tab
+ * altosdroid: Get rid of on-line only maps tab
+ * altosdroid: Select tracker by clicking on map
+ * altosdroid: Switch to four tabs (pad/flight/recover/map)
+ * altosdroid: Allow tracker selection from online map widget
+ * altosdroid: Mark four-tab change done
+ * altosdroid: Fix line drawing to old tracker location
+ * altoslib: Use a longer filter for descent values
+ * altosdroid: Show direction to target in recover tab
+ * altosdroid: Define strings for the tab names
+ * altosdroid: Change voice output around
+ * altoslib: Typo slipped into AltosState.java
+ * altosdroid: Make sure whole flight state is spoken even when no-one is moving
+ * altosdroid: Make sure flight voice output always starts with 'speed'
+ * altosdroid: Mark tab-dependent voice output as done
+ * altosdroid: Update version numbers in manifest
+ * Bump version to 1.6.0.3
+ * altoslib: Fix replay to run in realtime again
+ * altosdroid: Display direction in map view
+ * altosdroid: Class of offline map view widget changed
+ * altoslib: Don't crash if dragging a map view without any tiles
+ * altos/telebt-v3.0: Report battery voltage correctly
+ * altoslib: Support TeleBT v3.0 battery voltage conversion
+ * altosuilib: Receiver battery voltage lives in listener_state
+ * altosui: Correctly show/hide receiver battery value
+ * telegps: Add receiver battery to Status display
+ * altoslib: Make AltosMap floor/ceil static. Check transform in paint
+ * altoslib: Make earth size constants public
+ * altoslib: Limit simultanous map tile downloads to 128
+ * altoslib: Convert longitude from distance in AltosMapTransform
+ * altoslib: Preload maps based on distance rather than number of tiles
+ * altosdroid: Keep speaking even when screen is off
+ * altosdroid: Pop up menu of nearby trackers on map click
+ * altosdroid: Remove a debug line in AltosVoice
+ * altosdroid: Don't disconnect from bluetooth onStartCommand
+ * altosdroid: Add other igniter status, various other layout changes
+ * Generate Android version info from configure.ac
+ * altosdroid: Note time at startup to avoid flipping trackers
+ * altosdroid: Add 'Auto' to map tracker list
+ * altosdroid: Clean up tab layout
+ * altosdroid: Cleanup Makefile.am
+ * Bump version to 1.6.0.4 (android version 8)
+ * doc: Update for 1.6.1
+ * Bump configure.ac versions to 1.6.1
+ * Bump Java library versions
+
+ [ Robert Garbee ]
+ * add beep when test completes
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 16 Jul 2015 13:38:22 -0600
+
+altos (1.6-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos/test: Add TMv2 test program to .gitignore
+ * altos: Add smaller altitude table file to .gitignore
+ * altos: Make sure we don't beep out continuity twice in idle mode
+ * altosui: Ignore built .desktop file
+ * ao-bringup: Use C version of test-flash for telegps
+ * ao-tools: Add ao-test-gps program
+ * ao-bringup: Use C version of ao-test-gps in test-telegps
+ * ao-tools/ao-test-gps: Improve output formatting
+ * ao-tools/ao-test-igniter: Remove bogus printf
+ * ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
+ * Mark master branch as past the 1.5 point
+ * altosdroid: Update version code and name for 1.5
+ * altosdroid: Automatically sign the released version if the key is available
+ * altosui: Fix --replay to run in realtime after boost
+ * altosui: Bring up main window when doing --replay or --graph
+ * altosdroid: Update notebook to reflect current status
+ * altos: Make sure we drop the SPI mutex when aborting cc1120 recv
+ * ao-bringup: Auto-select programmer for teledongle turnon
+ * altos: Handle antenna down in ao_flight_test
+ * altosui: Check for map and stats table when changing units/fonts in graph
+ * altos: Record 32-bits for gyro calibration values
+ * altoslib: Deal with new Mega log format that has 32-bit gyro cal
+ * altosui: Update 'Imperial Units' checkbox when units change
+ * altoslib: Compute tilt angle from eeprom data
+ * altos: Fix syntax error with ao_log_mega change.
+ * altos: Copy cc1120 driver to cc1200 driver and hack a bit
+ * altos: Add prototype TeleDongle v1.9 code
+ * altoslib: synchronize access to serial debug output list
+ * altosuilib: Try to detect the architecture when loading JNI lib
+ * ao-tools/ao-send-telem: Add verbose, fake and rate options
+ * altos: Mark STM ao_spi_send as taking const pointer
+ * altos: Expose telemetry altitude macros even without GPS
+ * altos: Complete cc1200 driver
+ * altos/teledongle-v1.9: Add remaining code to complete the project
+ * altos: Sort out ao_gps_print altitude fetching
+ * altos: Increase PQT value for cc1200 improving sensitivity
+ * altos: Build TeleDongle v1.9 by default
+ * altos: Remove old AO_SEND_ALL_BARO bits
+ * altos: Perform cc1200 calibration less often. Tweak radio params
+ * altos: Fix up telemetry delay computations
+ * altos: Increase CC1200 SPI data rate to 8MHz
+ * altosui: Pop up 'Connecting' dialog during Monitor Idle
+ * altos: Rename microwater to microsplash
+ * Move teledongle 1.9 to 1.8; there's a new 1.9
+ * altos: Declare port register type only in arch header
+ * altos: Stop attempting to ramp power on CC115L
+ * altos: Use AO_SPO_SPEED_FAST for CC1200
+ * altosuilib: GPS errors are recorded in floating point, not integers
+ * altos: Use other TeleDongle LED for CRC-invalid packet reporting
+ * altos/lpc: Declare SPI send parameters as const
+ * altos/lpc: Disable JTAG when using pins for GPIO
+ * altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
+ * altos: Reset interrupt flags before TX in CC1200 driver
+ * altoslib: Missing headers for mag sensor in CSV output
+ * altoslib: Make AltosState serializable
+ * altosdroid: Don't display MISSING flight number
+ * altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
+ * altosdroid: TabMap needs to expose () constructor
+ * altoslib: add AltosPreferences state save/restore interfaces
+ * altosdroid: Save AltosState and restore at startup
+ * altosdroid: East and West were flipped in all GPS output
+ * Add AltosDroid release note for version 1.5
+ * altos/microsplash: fix .gitignore to ignore resulting binary
+ * altosui: Remove duplicate AltosUIPreferencesBackend.java
+ * altos: Allow TeleMega to be built without MPU6000
+ * altos/teledongle-v1.8: Make this the same as teledongle v1.9
+ * altos/cc1200: Wait for packet to be placed in FIFO during receive
+ * altos/cc1200: Open up preamble detect to improve sensitivity
+ * altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start
+ * altoslib: Add usbtrng, usbrelay and mpusb USB ids
+ * micropeak: Support µPUSB with our own USB ids
+ * ao-bringup: Clear pending output before setting frequency.
+ * altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm
+ * altos: Adjust CC1200 RSSI reporting value
+ * altos/lpc: Switch LPC SPI driver to interrupt-driven
+ * Set version to 1.5.9.1
+ * altos: Get rid of some accidental debug code
+ * altos/lpc: Fix double-buffered USB changes
+ * altos: Add support for TeleBT v3.0
+ * altos: Initial STMF04x support
+ * altos: USBtrng v2.0 hardware bringup
+ * altos: Add self-flash support for STM32F042 processor
+ * altos: Add flash-loader to usbtrng-v2.0
+ * ao-tools: Add --wait option to ao-usbload
+ * altos/stmf0: Fix linker scripts to make ao_boot work
+ * altos/stmf0: Add faster USB path
+ * altos/stmf0: Add ADC and DMA APIs
+ * altos/usbtrng-v2.0: Add random output command
+ * altos/stm: Fix typo in stm32l.h
+ * ao-tools: Add ao-usbtrng to dump RNG data for testing
+ * altos/stmf0: Remove remaining stm32l bits from stm32f0 code
+ * altos/stmf0: Add CRC driver
+ * altos/usbtrng-v2.0: Use stmf042 hardware CRC unit
+ * altos/stmf0: Re-implement fast ADC code for stmf0
+ * Oops, forgot the TeleBT-v3.0 Makefile
+ * And, also add the TeleBT v3.0 flash loader Makefile
+ * altos/stm: Add ability to delay STDIO usage for serial ports
+ * altos/btm: Add fancier debug. Pull serial reset port low.
+ * altos: Always include a check for stdio overflow
+ * altos/telebt-v3.0: Fix stdio setup for BTM
+ * altos/telebt-v3.0: Turn red LED off after initialization
+ * altos/stmf0: Support PA11/PA12 remapping
+ * altos/usbtrng-v2.0: Select PA11/PA12 mapping config value
+ * altos/telebt-v3.0: Add monitor bits
+ * altos/telebt-v3.0: Set initial radio cal to a sensible value
+ * altos: Rename teledongle-v1.9 as teledongle-v3.0
+ * ao-bringup: Add turnon_teledonglev3
+ * Revert "altos/lpc: Fix double-buffered USB changes"
+ * Revert LPC usb performance improvements
+ * altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram
+ * altos/easymini-v1.0: Shrink stack to deal with USB changes
+ * altos/lpc: Clean up USB endpoint access functions
+ * altos/lpc: Double buffer USB data transfers
+ * Update docs for 1.6
+ * libaltos: Use more SetupDi API to get Windows 7 listing devices
+ * Add 'keithp-fat' target for uploading temporary builds to keithp's machine
+ * windows: Look for current Java version in \SOFTWARE\Wow6432Node
+ * micropeak: Fix file association registry install on Windows
+ * micropeak: Support both FTDI and Altus Metrum USB IDs
+ * micropeak: Install Windows AltusMetrum driver bits
+ * altosuilib: New teledongle and telebt devices are not pair-programmed
+ * Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps
+ * altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607
+ * altosuilib: EEProm download from TeleGPS doesn't have states
+ * altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing
+ * altoslib: Support TeleGPS for Monitor Idle
+ * altoslib: Use 'stateless' for Monitor Idle
+ * altoslib: Initialize GPS data to MISSING for Monitor Idle mode
+ * altos/drivers: Increase SPI speed of CC115L to 6MHz
+ * altos/lpc: Give up on interrupt-driven SPI driver
+ * altos: Separate out ao_tracker force from dbg
+ * Update version 1.6 release notes with more bug fixes
+ * altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works
+ * altosui: Remove the dregs of AltosDroid load-old-telem code
+ * altoslib: Mark listener as 'not running' on EOF.
+ * altosuilib: Wait for product data while scanning
+ * altoslib: Drop telemetry packets processed while monitoring is disabled
+ * altosuilib: Reset telemetry state after processing it
+ * altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI
+ * altosuilib: Set the icon and title of the telemetry scanning dialog
+ * doc: update 1.6 release notes with recent bug fixes
+ * altosuilib: Get the Eeprom download progress bar working again
+ * altosuilib: Don't offer to graph some GPS details that TM doesn't log
+ * Bump java library versions
+
+ [ Bdale Garbee ]
+ * updated to reflect changes from 1.5 release
+ * reflect filename changes in LLC repo
+ * store cal value correctly even when we didn't need to change it
+ * document pyro current limits in an appendix
+ * improve test procedures for TeleMega
+ * document addition of TeleDongle to the set of ARM targets to save binaries for
+ * update ChangeLog for release
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 07 Feb 2015 22:40:49 -0700
+
+altos (1.5-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * notes updated for TeleGPS and 1.4 release learnings
+ * make sure to use Google Maps API key for official builds
+ * need the api key in Bdale's root too
+ * update Releasing file based on learnings from 1.4.1 release
+ * Windows sucks, hard .. make sure filenames are legal in .mdwn files
+ * note need to push the updated repo with production binaries during release
+ * update turnon tools
+ * change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile
+ * turn echo back on after accel cal in turnon_telemetrum so rest is easier
+ * tweaking test scripts
+ * releasing version 1.5
+ * updated ChangeLog for 1.5 release
+ * update changelog for Debian build
+ * capture deleted file
+ * more build dependencies for processing icons
+ * more build dependencies for processing icons
+ * update ChangeLog
+ * update changelog for Debian build
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * update changelog for release
+ * update changelog for Debian build
+ * need multi-arch in fat build
+ * ignore cal_values file in bringup directory
+ * updated ChangeLog for release
+
+ [ Keith Packard ]
+ * doc: Add instructions for flash recovery technique
+ * altos/micropeak: Create a script to load firmware.
+ * altosui/telegps: Use menus for frequency list and telemetry formats
+ * altosuilib: Move menu bars into the Mac OS X top bar
+ * altosui: Fix ground station configure frequency list
+ * java: Bump java library versions for next release
+ * altos/micropeak: Add load script template
+ * Sign our .inf file with the comodo key. Update signing-driver
+ * Fix java version detection and downloading
+ * icon: Construct .exe files to hold windows icons for file associations
+ * windows installer: Create file associations for Windows.
+ * macosx: Define icons for our file types on OS X
+ * altosui: Ship TeleMetrum v2.0 firmware with AltosUI
+ * altosuilib: Hook up apple messages to callbacks
+ * macosx: Respond to apple messages in all apps
+ * windows: Missed adding 'refresh-sh.nsh'
+ * linux: .desktop files must begin with organization name
+ * Rename icon files to fit XDG specifications. Add file icons. Add mime types
+ * altosuilib: Wrap radio frequency menu in JMenuBar when used in config
+ * altos/aprs: Encode last serial number in SSID. Transmit serial in comment
+ * altosui: Add Ignitor tab to Monitor Idle mode
+ * altos: Make APRS SSID configurable
+ * altosui/telegps: Expose configurable APRS SSID
+ * ao-tools: Add ao-test-baro, ao-test-igniter and ao-test-flash
+ * ao-bringup: Use the C tools to test EasyMini
+ * altos: Add optional debugging to print out pyro firing status
+ * altos/ao_flight_test: Get the Tmega version compiling again
+ * Bump version to 1.4.1.1
+ * altosuilib: Make map cache size configurable
+ * altosuilib: Outline map lines and distance value with white
+ * icon: Generate altusmetrum.xpm and install it
+ * altosuilib: Mark 'Configure AltosUI' window with maps key status
+ * Clean all .desktop files, ignore them too
+ * Add 1.4.1 release notes
+ * Add note about including Google maps API key
+ * altosui: Don't show the tracker motion value when switching units
+ * telegps: Disable tracker config when not available
+ * altosui/telegps: Undo the frequency/telemetry menu changes
+ * altoslib: Disable telemetry while getting config data
+ * altoslib: Preserve receiver_serial across state reset for new transmitter
+ * altosuilib: Remove debug printfs from map cache
+ * altos: ao_rssi subsystem needs to use AO_LED_TYPE instead of uint8_t
+ * altos: Stop sticking cc1111 firmware in src directory
+ * altos: Use TeleMetrum v1.9 board for MegaDongle experiments
+ * altos: Reduce configuration data telemetry to once per 5 seconds
+ * altos: Add defines for 2400 and 9600 baud telemetry rates
+ * altos: Add config support for 2400 and 9600 baud telemetry rates
+ * altos: Call ao_telemetry_reset_interval when telemetry rate changes
+ * altos/cc1111: Adjust receive parameters to improve sensitivity
+ * altos/cc1111: Add 2400 and 9600 baud telemetry rate support
+ * altos: Add 2400 and 9600 baud telemetry support to cc115l driver
+ * altos: Packet reception tuning for cc1120 driver
+ * altos: Add telemetry rate support to CC1120 driver
+ * altos: Rework packet receive for cc1120
+ * altoslib: Support multiple telemetry rates
+ * altosuilib: Add telemetry rate to Scan UI
+ * altosui: Support telemetry data rates
+ * telegps: Support variable telemetry rate
+ * Add support for the "kite" micropeak variant
+ * Bump version to 1.4.9.1 -- on the way to 1.5
+ * altosui: Hide inactive altimeter configuration entries
+ * altos/telemini-v2.0: Add memory decorations to new telemetry variables
+ * altos: Add smaller pa to altitude table for TeleMini
+ * altos/telemini-v2.0: Enable beep config and radio rate config
+ * micropeak/altosui/telegps: Fix icon file names
+ * altoslib: Clean up GPS DOP support in AltosState
+ * altoslib: Ensure CSV output is consistent
+ * altosuilib: Add GPS DOP values to graph
+ * altosuilib: Add GPS DOP values to info table
+ * altosuilib: Allow for unitless axes in graphs
+ * altos: Extend GPS altitudes to at least 24 bits everywhere
+ * altoslib: Handle wide GPS altitude values in eeprom and telemetry
+ * altos: Scale DOP values by 10 in GPS drivers
+ * altos: Record pdop value in TeleMetrumV2 log
+ * altos: Use 32-bits for flight state data (alt/speed/accel)
+ * altosui: Fix the 'Graph' button on the landed tab
+ * altoslib: Extend telemetry heights from 16 to 32 bits
+ * libaltos: Bind to libbluetooth at runtime on demand
+ * altosui: Don't show bluetooth UI bits on mac/windows
+ * libaltos: typo in libaltos broke the build
+ * telegps: Missing function in TeleGPSConfigUI
+ * altos/telefire,telelco: Add HAS_RADIO_RATE to launch system software
+ * ao-tools: Add TMv2 and Tgps log formats to cc.h
+ * ao-tools: Provide altitude to temperature conversion function
+ * ao-tools: Add a few GPS telem/eeprom constants
+ * altos: Interrupt radio receive when changing data rate
+ * altos: Make ao_gps_print deal with telem containing 32-bit altitude values
+ * altos/test: Build TeleMetrumV2 flight test variant
+ * altoslib: Parse eeprom 'altitude-32' fields
+ * Set version to 1.4.9.2
+ * altosuilib: Fix minor scan UI nits
+ * linux-fat: Fix up fat linux install icons, mime types and .desktop files
+ * altoslib: Handle TeleGPS files for KML export
+ * altos: Have MicroKite just start recording at startup
+ * altos: Document which TeleFire alarm pins are which
+ * altos: Report additional pyro channels via beeper
+ * altosdroid: Add telemetry rate support
+ * altosdroid: Skip updating hidden UI elements
+ * altoslib: Parse 'Log fixed:' configuration value
+ * altoslib: Handle link timeout in AltosDebug.read_memory
+ * altoslib: Close serial port when AltosFlash fails to detect a target
+ * altoslib: Improve performance of AltosLib.hexbytes
+ * altoslib: Remove some debug printfs
+ * ao-tools/ao-send-telem: Support sending TM v2 and Tm v2 telemetry
+ * Use -ldl when testing whether -m32 and -m64 builds work
+ * cc1111: Wait for internal flash write to complete
+ * telegps-v1.0: Provide one log and append to it
+ * altosui: Make Windows java test "smarter"
+ * altos: Add telerepeat-v1.0
+ * Add ao-tools/ao-cal-accel
+ * ao-bringup: Use ao-cal-accel instead of cal-accel in turnon scripts
+ * ao-bringup: Test EasyMega boards
+ * altos: Make sure pyro remains valid during delay
+ * altosdroid: start restoring from log data on startup
+ * altoslib: TeleMega telemetry pyro voltages are uint8
+ * altosdroid: fixup fetching active device address
+ * altosdroid: Add quit. Restart. Show freq in title.
+ * altoslib: create logfiles preference object. check link in existing_data
+ * altosdroid: Add missing preferences backend file
+ * altosdroid: reload previous log file at connect time
+ * altos: Don't add AO_LOG_FLIGHT to existing GPS logs
+ * altoslib: Ignore extra AO_LOG_FLIGHT records from TeleGPS
+ * altoslib: Catch a couple null pointers in AltosConfigTD
+ * altosui: Fix 'pad' screen for TeleGPS
+ * altos/telefire: Add firing length to manual pad command
+ * altosdroid: Use single object to pass data to UI
+ * altos: Allow negative values for pyro configuration data
+ * altosui: Don't mark altimeter dirty when opening pyro panel
+ * altosdroid: add new TelemetryState.java
+ * altosdroid: Ignore TelemetryService messages after service shutdown
+ * altosdroid: Update tab contents before switching
+ * altosdroid: Add imperial unit support
+ * altosdroid: Mark completed items as 'done'
+ * altos: Reduce deviation at 2400/9600 baud
+ * altoslib: Update local callsign/baud rate when using remote protocol
+ * altoslib: Increase timeouts when using low baud rate remote protocol
+ * altos: Scale packet master receive delay by baud rate
+ * doc: Update for version 1.5 release
+ * altosui: Include EasyMega firmware in fat release
+ * Tag version 1.4.9.3
+ * altoslib: Fix idle monitor parsing of MMA655x state
+ * altos/easymega: Set USB PID for EasyMega to 0x0028
+ * altoslib/altosuilib: Add EasyMega support
+ * altoslib/altosuilib: clean all versions of the .jar file
+ * icons: Use DESTDIR when updating mime/icon caches
+ * .desktop: Use %F instead of %f in .desktop files
+ * configure: Add --disable-install-shared-mime-info option
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos: Make sure we don't beep out continuity twice in idle mode
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 13 Sep 2014 11:33:05 -0600
+
+altos (1.4.1-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Sign our .inf file with the comodo key. Update signing-driver
+ * Fix java version detection and downloading
+ * altosui: Ship TeleMetrum v2.0 firmware with AltosUI
+ * Add 1.4.1 release notes
+ * Add note about including Google maps API key
+ * altosuilib: Mark 'Configure AltosUI' window with maps key status
+
+ [ Bdale Garbee ]
+ * notes updated for TeleGPS and 1.4 release learnings
+ * make sure to use Google Maps API key for official builds
+ * need the api key in Bdale's root too
+ * releasing 1.4.1
+ * update ChangeLog for release
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 24 Jun 2014 21:57:12 -0600
+
+altos (1.4-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Add linux installer script
+ * Put altusmetrum.svg and micropeak.svg in icon directory
+ * Move .desktop and icon management out of debian dir
+ * micropeak: Construct linux install script
+ * Mark .desktop files as executable
+ * Re-create drill templates
+ * doc: Need to publish .svg files as well
+ * altos: Move balloon flight code to core
+ * altos: Expose ao_usb_running globally
+ * altos: Set reasonable accel values when !HAS_ACCEL
+ * altos: Make balloon code run again
+ * altos: Create balloon-specific load for TMv2 hardware
+ * libaltos: Link so with -znoexecstack flag
+ * Mark development sequence to 1.3.3 by bumping version to 1.3.2.1
+ * altosui: Retry device enumeration after rebooting for self flash
+ * Install .desktopfile as _SCRIPTS so they are left executable
+ * doc: Add separate outline pdf generation
+ * Add flash loader for stm-demo board
+ * Re-add LCD bits to stm-demo
+ * Add USB True Random Number Generator product
+ * altos: Don't require projects to define PACKET_HAS_SLAVE
+ * altos: fix building LPC serial support for STDIO
+ * altos: Fix LPC LED driver
+ * altos: Missing ao_pins files for usbtrng
+ * altos: Another missing usbtrng file
+ * altosui: Hide Tilt Angle values when not available
+ * Add easymega firmware
+ * altos: HAS_LED is useless; remove it
+ * altoslib: Ignore speed/accel after boost when finding maxima
+ * altoslib: Fix EasyMini voltage computations
+ * Add easymini turnon script and helpers
+ * altoslib: Missed a couple of easy mini voltage API changes
+ * altos: Rename 'core' to 'kernel'
+ * ao-bringup: Get turnon_telemini working
+ * ao-tools: Use 'program' command in ao-flash-lpc instead of 'flash'
+ * ao-tools: Wait for device to become ready instead of failing
+ * doc: Outline files are now generated, so don't put them in git
+ * altos: Report battery voltage instead of S at startup
+ * Bump version to 1.3.3
+ * doc: Document new voltage beeping at startup time
+ * altosui: Add ignitor tab for TeleMega extra ignitors
+ * ao-bringup: Split out easymini test into separate script
+ * altos: Build TeleBalloon v2.0 by default
+ * altos: Replace C code attiny async output with inline asm
+ * altos: Provide stable binaries for MicroPeak
+ * altos: Fix nanopeak compile
+ * altosui: Disable flight log configuration while flights are stored
+ * altos: Add 'microwater' product
+ * altoslib/altosui/altosuilib/libaltos: Remove trailing whitespace
+ * altosuilib: Make lines in graphs 2 units wide
+ * altos: Switch beeping to farnsworth spacing
+ * altosui: Add extra ignitors to graphable objects
+ * altoslib: Track pyro firing state when reading mega eeprom files
+ * altosui: Mark TeleMega additional pyro ignitor fired points in graphs
+ * ao-telem: Dump orientation field from TeleMega sensor telemetry packet
+ * ao-load: Make ao_sym static to avoid collision with ao-editaltos
+ * ao-tools: Clean up ao-sym structure an initializers
+ * altos: For telelco discovery packets, retry 5 times with shorter timeout
+ * altos: Add configurable beep tone
+ * altosui: Add configuration UI for beeper tone
+ * altos: 8051 64 * 16 multiply function was broken for negative 64-bit
+ * altoslib: Add a comment to remind us to fix the IMU code to deal with calibration
+ * altoslib: Parse remaining mega AO_LOG_FLIGNT and AO_LOG_GPS_TIME fields
+ * altosui: Add GPS course, ground speed and climb rate to graphs
+ * altos: ublox driver always offers course data when it has a fix
+ * altos: Fix byte offsets in the mega AO_LOG_FLIGHT packets
+ * altos: Clean up trailing whitespace in ao_pad.c
+ * altos: Simplify quadrature tracking
+ * atosui: Hide Callsign and RSSI tabs for devices without a radio
+ * ao-bringup: test-baro should accept altitudes a bit below sea level
+ * ao-bringup: Use official binaries for EasyMini turnon
+ * altos: Add LED test command to pca9922 driver
+ * altos: Report amount of program space available in the version command
+ * altos: Assume all LPC products will have 32KB of flash
+ * altos/stm: Use flash address of boot loader instead of 0x0
+ * altos/stm: White space fix in ao_boot_pin.c
+ * altos/stm: Figure out available flash space based on chip id registers
+ * altos/stm: Use #define'd constants for GPIO register addresses
+ * altos/flash-loader: Check memory addresses against flash space
+ * ao-tools/ao-usbload: Check image flash usage against device flash availability
+ * altos/cc1111: Wait for xtal to be stable
+ * altos/cc1111: Errata fix isn't needed for discontinued products
+ * altos/cc1111: Add support for CPU-driven USB pullup
+ * altos/cc1111: Switch P1_0 from a green LED to USB pullup
+ * altos/telemini-v2.0: Remove old baro->alt conversion table
+ * altos/telemini-v2.0: Enable beep frequency configuration
+ * altos: Make quadrature debounce per-pin rather than per-device
+ * doc: Document the Apogee Lockout setting
+ * altos: Use explicit boot loader signal in ao_boot_reboot
+ * altos: stm and lpc ao_boot.h were identical. move to kernel.
+ * altosui: Remove debug printf about beep config
+ * altosui: Remove another beep config debug printf
+ * altos/stm: Make stm applications depend on ao_boot.h
+ * altos/lpc: adc code computes number of active ADC channels
+ * altos/lpc: whitespace
+ * altos: Allow APRS to send just battery voltage
+ * altos: Fix cc115l debug build
+ * altos: Expose ao_gps_set_rate from u-blox driver
+ * altos: Don't define ao_ignite_decivolt without igniters
+ * altos/test: Get APRS generation test working again
+ * altos/test: Parse mega ground data. Fix pyro parsing
+ * altos: Add config values for tracker start motion limits
+ * altoslib: Move CSV/KML output code to altoslib
+ * altosui/altosuilib: Cleanup -Xlint:unchecked warnings
+ * altosui/altosuilib/altoslib: Move more stuff out of autosui. Reduce site map memory
+ * ao-tools: Add cc_usb_write function
+ * altoslib/altosuilib: Change versions to altoslib:4, altosuilib:2
+ * micropeak: Add -Xlint:unchecked to javac line
+ * altos: Make MS5607 PROM a public variable
+ * altos: Move ao_config declarations to ao_config.h
+ * altos/test: Fix ADC structure for mega, use ao_config.h
+ * altosuilib: Add multiple zoom levels and content types to map
+ * altos: Fake flight code changes in kernel and stm
+ * altosuilib: Add distance measuring line to site map.
+ * altosuilib: Decompress map images asynchronously and in parallel
+ * altosuilib: Add google maps API key, configured with -with-google-key
+ * altoslib: When log-format is missing, use product
+ * altosuilib: Remove debug printf in AltosSiteMapCache
+ * altosuilib: Update map preloading UI to include zoom and maptypes
+ * altosuilib: Publish AltosSiteMap.centre. Add prefetchMaps with old API
+ * altosuilib: Don't try to draw to destroyed map windows
+ * Document the need for ~/altusmetrumllc/google-maps-api-key
+ * altosui/altosuilib: Shuffle lots more code from altosui into altosuilib
+ * telegps: Add first version of telegps
+ * Mark version 1.3.2.2
+ * doc: Add outline of TeleGPS doc
+ * telegps: Working towards building fat versions of telegps application
+ * telegps: Use altosui's Instdrv NSIS plugin for telegps
+ * telegps: Add device configuration dialogs
+ * telegps: Add preferences dialog
+ * telegps: Add scan UI
+ * telegps: Hook up data download dialog
+ * telegps: Add 'Info' tab
+ * telegps: Don't try to ship TeleGPS firmware yet
+ * telegps: Auto-connect to any base stations plugged in at startup
+ * telegps: Add flash device functionality
+ * telegps: Add info table
+ * java: Refactor AltosFlightDisplay units and font update handling
+ * telegps: Add graph display
+ * Build telegps distribution bits with 'make fat'
+ * telegps: Add missing TeleGPSGraphUI.java file
+ * Capture windows build error messages
+ * TeleGPS firmware isn't quite ready, don't include in windows fat build yet
+ * telegps: Fixup windows fat build harder
+ * telegps: Add config for tracker starting distances
+ * altos: Switch APRS altitude encoding computation to fixed point
+ * altos: Test APRS altitude encoding
+ * altos: Allow sparse GPS data logging for TeleGPS
+ * altos: Configuring pyro channels can use more than 48 characters
+ * altos: Maximum pyro configuration parameter has 4 bytes in the name
+ * altos: Fetch/store only 8 bits for pyro state values
+ * altosui: Fix pyro channel value formatting
+ * altosui: Display error message when parsing pyro channel values fails
+ * altoslib: Add missing AltosConfigDataException file
+ * telegps: Trap AltosConfigDataException in telegps config
+ * doc: Create release notes for version 1.4
+ * altosuilib: Let the user hand-edit the preload map radius
+ * telegps: Update icon and icon building
+ * altos: Add ao_distance.c to compute cartesian distances on the globe
+ * altos: Add tracker task for TeleGPS
+ * altos: Include sensor logging task only on flight boards
+ * altos: Allow cc115l driver to be built without radio power control
+ * altos: ao_distance was overflowing when checking for longitude wrap
+ * altos: Change tracker not-moving speed to 2m/s and document
+ * altos: Have tracker average 5 GPS samples before moving to pad mode
+ * altos: Stick flight state in GPS location packets
+ * altos: Fix tracker start state
+ * altos: tracker distance computation flipped arguments around
+ * altos: Add debug to tracker to force launch
+ * altos/telegps-v0.3: Add tracker task
+ * altos: Add AO_LOG_FLIGHT packet to TeleGPS logs
+ * altos: Fix config to set default log size for all devices with log
+ * altos/lpc: HAS_USB_CONNECT has been changed to mean a custom pin
+ * altos: Force telemetry on by default for v0.3 TeleGPS boards
+ * altos/telegps-v0.3: Disable APRS by default. Set log max to 1M
+ * altos/telegps-v0.3: Remove ao_flight_number from main program
+ * altos: Add telegps-v1.0 code and loader
+ * altos: Move ao_tracker.c to kernel
+ * altos: Allow AO_CONFIG_MAX_SIZE to be configured. Validate it.
+ * altos: Allow value other than 0 for marking erased flights
+ * altos: Clear out eeprom erase records when writing entry 0
+ * altos/telemega-v1.0: Adjust config params to make flight erase work
+ * altos: Add TeleGPS logging format
+ * altos: Write current flight state to GPS data from GPS drivers
+ * altos: Write tracker logging from tracker thread directly
+ * altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARK
+ * altos: Switch TeleGPS to GPS logging format
+ * altoslib: All products with logging have the 'l' command
+ * altoslib: Add TeleGPS log parsing code
+ * altoslib: Record whether flight data includes sensor values in AltosFlightStats
+ * altosuilib: Show GPS instead of (missing) flight data for TeleGPS graphs
+ * altosuilib: Add GPS altitude as a possible graph value
+ * altosuilib: Fix crash when initializing site map cache
+ * telegps: Track graph windows as one of the TeleGPS windows
+ * Set version to 1.3.2.3
+ * altos: Use 0x80 to indicate valid state value in the GPS location packet
+ * altos: Define lat/lon sum variables as 64-bit instead of 16
+ * altos: Reduce tracker GPS buffer to 4 samples
+ * altos: Make telegps builds depend on ao_tracker.h
+ * ao-tools: Parse TeleGPS state value from gps location packet
+ * altoslib: Parse TeleGPS state value from GPS telemetry packet
+ * altos: Encode TeleGPS battery voltage in configuration packet
+ * altos: Enable ADC for TeleGPS v1.0 battery voltage measuring
+ * altoslib: TeleMega uses 5.6k/10k divider for v_batt
+ * altoslib: Recover battery voltage from TeleGPS configuration packet
+ * Bump to version 1.3.2.4
+ * Revert "altoslib: Parse TeleGPS state value from GPS telemetry packet"
+ * Revert "altos: Write current flight state to GPS data from GPS drivers"
+ * altos: Report total available log space in version command
+ * altos: Make extra pyro channel firing time configurable
+ * Revert "ao-tools: Parse TeleGPS state value from gps location packet"
+ * Revert adding state to GPS location packets
+ * altos: Simplify tracker logic, removing boost detect
+ * altos: Set TeleGPS default log size to half of avaiable memory
+ * altoslib/altosui/telegps: Change log size configuration
+ * altoslib/altosui/telegps: Switch TeleGPS config to motion/interval
+ * altoslib: TeleGPS no longer logs satellite information
+ * altoslib: Add new 'stateless' flight state for TeleGPS
+ * altoslib: Check for time going backwards when replaying from file
+ * altosuilib: Split battery graph enable out from other adc enables
+ * altoslib: Use GPS speed/height values when other sensors are missing
+ * altosui: Show "Missing" instead of huge numbers in descent/landed tabs
+ * altosuilib: Skip voice announcements for invalid values
+ * altosuilib: Move AltosFlightStatsTable to altosuilib
+ * telegps: Add statistics tab to graph UI
+ * altosuilib: Rewrite map GUI bits
+ * altoslib: Use GPS seconds as an additional sort key for TeleGPS eeprom
+ * altos: Disable TeleMini v2.0 build for now
+ * altosuilib: Remove old widget-based map UI
+ * altos/telemini-v2.0: Disable beep frequency config on TeleMini v2.0
+ * altos: Re-enable telemini v2.0 builds
+ * altosdroid: Altosdroid build doesn't work in parallel, so stop trying
+ * altosui: Add pyro firing time configuration
+ * doc: Update 1.4 release notes to include a few more changes
+ * altosuilib: Handle font and units changes in maps and stats table
+ * altosui: Don't list tracker parameters when configuring altimeter
+ * altoslib: Report GPS height when baro height is not available
+ * altosuilib: Repaint map when starting line draw
+ * altos/telegps: Build .ihx versions for TeleGPS
+ * telegps: Remove 'Flight' from titles
+ * doc: Update altusmetrum docs and screen shots for 1.4
+ * doc: Add TeleGPS screenshots
+ * altosui/telegps: Reduce CPU time needed for flight displays
+ * telegps: Don't re-add frequency menu when already present.
+ * altos/telegps: Don't log data when plugged in to USB
+ * debian: Fix build depends icotool -> icoutils
+ * altos: Show current flight number for TeleGPS
+ * altos/telegps: Set default log to 496kB for 4 logs
+ * altos/telegps: Keep ring of recent GPS positions to detect motion quickly
+ * altos: Define ao_log_mutex in ao_log.c rather than every log product
+ * altos/telegps: Create new flight if current flight is erased
+ * altoslib: Call state.set_serial first for telemetry parsing
+ * altoslib: Remove telem monitoring when closing log file
+ * telegps: Disconnect telemetry device when closing monitor window
+ * telegps: Show flight number in monitor window
+ * altosuilib: Build some common classes for displaying values in flight window
+ * altoslib: Add conversion class for voltages
+ * altoslib: Correctly save firmware version in AltosState
+ * telegps: Add status tab
+ * altosdroid: Don't crash when the map is touched
+ * altosdroid: Improve voice for TeleGPS
+ * telegps: Shuffle menu entries around
+ * altosuilib: Make map-cache per-window instead of global
+ * doc: Add a bunch more stuff to the telegps docs
+ * telegps: Allow TeleGPS preferences to have a custom title and label
+ * doc: TeleGPS docs are complete
+ * altoslib: Add units converters for latitude and longitude
+ * altoslib: When GPS disappears, set range and elevation to MISSING
+ * altosuilib: Require all flight display classes to provide a name
+ * altosuilib: In graph, show zero sats in view as 0 instead of MISSING
+ * altosuilib: provide getName() for AltosInfoTable
+ * altosuilib: Make sure only one thread is closing serial device
+ * altosuilib: Add more options to AltosUIIndicator to suit AltosUI
+ * altosuilib: Add AltosUIFlightTab class
+ * altosui/telegps: Switch to AltosUIIndicator and AltosUIFlightTab
+ * alotsuilib: Remove old "mega" and "mini" file extensions from data chooser
+ * micropeak: Make statistics entries un-editable
+ * telegps: Fix Mac icon file name
+ * altosuilib: Make graph enable buttons be CheckBoxes instead of RadioButtons
+ * icon: Create all icons from .svg files
+ * icon: Build windows ico files, clean built files
+ * altosui: Build MacOSX icon from svg
+ * icon: Build resolutions needed for Java bits too
+ * telegps/micropeak: Ship built Mac OSX icons
+ * debian: Build requires /usr/bin/convert now
+ * icon: Make the icon shadows a bit less harsh
+ * altosuilib: Serialize access to async tile notify function in preload
+ * altoslib: AltosFlightStatsTable: another editable text field that shouldn't be
+ * altosuilib: Remove some debugging printfs
+ * telegps: Include telegps firmware in windows package
+ * windows: Rename telemetrum.inf to altusmetrum.inf
+ * telegps: Deal with 64-bit windows differently on install
+ * altosui: Deal with 64-bit windows
+ * icon: Add drop-shadows to the SVG files; stop generating in the png versions
+ * windows: Sign altusmetrum.inf with altusmetrum.cat
+ * altosui: Ship telegps firmware
+ * Add notes about windows driver signing in the 'signing-driver' file
+ * micropeak: Deal with 64-bit windows
+
+ [ Bdale Garbee ]
+ * have the cal-freq script save cal values to a file
+ * use svg in the .desktop file
+ * update copyright year assertion in MicroPeak manual, remember during releases
+ * deliver images used in MicroPeak manual to web server, too
+ * typo fixes from Matt Kraai
+ * update turnon scripts to store cal values
+ * ugly hack (just make sleep longer) to work around ttyACM* discovery issue
+ * first cut of usbrelay-v0.1 support .. LEDs wiggle, not switching relay yet
+ * relay control implemented, this project is now complete
+ * fix copyright year
+ * update TeleMega turn-on script and Releasing for new stable firmware home
+ * lose the (old) easymega-v1.0 directory in favor of my fresher 0.1
+ * working?
+ * include EasyMega Makefiles
+ * document mounting hole size for TeleGPS
+ * update Releasing document to include TeleGPS firmware files in those copied
+ * tweaks
+ * add release to revision history
+ * tagging 1.4 release
+ * turn-on support for TeleGPS
+
+ [ Tom Marble ]
+ * add jenkins.sh
+ * fix for jenkins.sh
+ * jenkins.sh: make -j 4 can fail, fix for altosui-test
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 15 Jun 2014 17:51:01 -0600
+
+altos (1.3.2-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * update notes on how to release
+ * use firmware in /usr/share/altos for teledongle, update telemetrum for v2.0
+ * updating changelog for release
+
+ [ Keith Packard ]
+ * altoslib: Validate TeleMega GPS_SAT log packet nsat
+ * altos: Tmega Don't try to log info about more than 12 GPS sats
+ * doc: Add 1.3.2 release notes
+ * Set version to 1.3.2 in preparation for release
+ * doc: Document flight computer wiring connections
+ * doc: Fix spelling of decelerate
+ * altoslib: Track GPS altitude values to be able to report max gps height
+ * altosui: Show GPS max height in flight stats window of graph
+ * altoslib: Don't lose gps_height value between GPS samples
+ * doc: Add explicit paragraph about using one battery with Tmega
+ * altosui: Use letter names for pyro channels in pyro config UI
+ * doc: Update screen capture of pyro config with correct names
+ * doc: Replace screen captures with 'active' window ones
+ * doc: Mention that an APRS interval of 0 disables it entirely
+ * altoslib: Use existing unicode Charset in AltosLink
+ * micropeak: Watch serial data during download
+ * altos: report 0/0/0 for APRS position when GPS is not locked
+ * micropeak: Keep reading until we get valid data
+ * micropeak: Missing a couple of new exceptions when loading files
+ * doc: Micropeak doc updates for 1.3.2
+ * doc: Update micropeak docs to include lots of pictures
+ * doc: Document GPS max height addition
+ * doc: Ignore generate template XSL file
+ * doc: Add title page image to altusmetrum.pdf
+ * altos: Add names when reporting STM ADC values
+ * altos: Add watchdog timer task
+ * altos: Eliminate warnings in FAT code
+ * altos: Enable system timer in flash loader and prod watchdog with it
+ * altos/stm: Block interrupts while reprogramming flash
+ * altos: Don't write more than 12 sat infos in ublox driver
+ * altos: Report nsat in view in APRS packet
+ * altos: Add needed math sources to TeleGPS v0.1 build
+ * altos: Fixup named ADC printing
+ * altos: Re-send previous GPS position in APRS if lock is lost
+ * altos: Put locked/unlocked GPS status in APRS comments
+ * doc: Add remaining configurable parameters to the System Operation chapter
+ * doc: Update the 1.3.2 release notes to include APRS and Fire Igniter changes
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 13 Feb 2014 21:56:46 -0700
+
+altos (1.3.1-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * updated notes from 1.3 release
+ * use firmware in /usr/share/altos for production flashing
+ * set version to 1.3.0.2 for test flights this weekend
+ * set version to 1.3.1 for release
+ * update copyright date on main documentation file
+ * freshen ChangeLog for release
+
+ [ Mike Beattie ]
+ * altosdroid: force older jarsigner signing algorithm for java 1.7
+ * altosdroid: update to latest google play services
+ * altosdroid: improve build system dependencies
+
+ [ Keith Packard ]
+ * altoslib: Convert IMU and Mag sensor values to useful units
+ * altoslib: Fetch 'orient' value from Mega Sensor packet
+ * altosuilib: Rearrange graph enable buttons
+ * altosui: Add imu and mag sensor values to plots
+ * altoslib: Bump library version
+ * altos: Execute self-test on MMA655X part
+ * altos: 3-axis accel calibration was invalid in explicit accel cal mode
+ * altos: Complain about sensor self-test errors only in idle mode
+ * altos: mma655x also needs ao_sensor_errors
+ * altos: Clean up some minor warnings from -Wall
+ * altos: Turn on -Wall for stm compiles
+ * altos: Clean up -Wextra warnings
+ * altos: unsigned value in ao_pyro_set checked for negative value
+ * altos: Add default button return value from ao_button_get
+ * altos/stm: Turn on -Wextra
+ * altos: Clean up warnings for LPC products
+ * altos: cc115l driver tone_run wasn't recording number of tones
+ * altos: lpc exti setup was incorrectly testing mode
+ * altos/lpc: Missing */ in definition of PIO0_4
+ * altos: Turn on warnings for LPC products too
+ * altos: Turn on -Werror for STM and LPC builds
+ * altosui: Switch from radio buttons to check boxes in pyro config. Add close
+ * altosui: Extend Fire Igniter to additional channels
+ * altoslib: Add AltosOrient class and max_orient()
+ * altosui: Add orient to ascent and info table views
+ * altosui: Adjust info table column width
+ * altosui: Switch Graph to AltosOrient type
+ * altos: Add 'O' command for TeleMega orient testing
+ * altos: Flip acceleration data consistently for orientation changes
+ * altosui: Handle a missing libaltos when starting up
+ * Bump version to 1.3.9.1
+ * libaltos: Build -m64 and -m32 for fat tarball when possible
+ * altosui: Require both libaltos32 and libaltos64 for fat Linux tarball
+ * doc: Ship telemini outline as pdf file too
+ * altos: Switch APRS to compressed position format
+ * altos: Use factory calibration for all acceleration computations
+ * altos: Report battery, apogee and main voltages over APRS
+ * Ignore 32 and 64 bit cjnitest apps
+ * altos: Add missing ADC divider values for Tmega v1.0
+ * altosui: Make romconfig serial and radio cal fields 8 digits wide
+ * altoslib: Fetch target device config for Fire Igniter npyro value
+ * altosuilib: Remove some spurious debug printfs
+ * altosui: Handle already-opened link in IgniteUI
+ * altosui: Handle serial-port startup errors in idle-monitor
+ * doc: Fix image widths to make them all scale the same amount
+ * doc: Update for 1.3.1
+
+ [ Anthony Towns ]
+ * AltosSiteMapPreload: only load 49 maps
+ * altosui: --fetchmaps gets same number of maps as GUI
+ * altosui: rate limit map downloads
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 22 Jan 2014 20:56:31 -0700
+