+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+ AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+ AOLOAD=/usr/bin/ao-load
+else
+ echo "Can't find ao-load! Aborting."
+ exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+ RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+ RAWLOAD=/usr/bin/ao-rawload
+else
+ echo "Can't find ao-rawload! Aborting."
+ exit 1
+fi
+
+echo "TeleDongle v0.2 Turn-On and Calibration Program"
+echo "Copyright 2010 by Bdale Garbee. Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleDongle v0.2 powered from USB"
+echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from SMA to frequency counter"
+echo
+echo -n "TeleDongle serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+case $USER in
+ bdale)
+ programmer=100
+ ;;
+ keithp)
+ programmer=186
+ ;;
+esac
+
+$RAWLOAD -D $programmer -r ao_led_blink.ihx
+echo "LEDs should be blinking"
+sleep 5
+
+$RAWLOAD -D $programmer -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier. Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo $SERIAL","$CAL_VALUE >> cal_values
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"