projects
/
fw
/
altos
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
Bump version to 1.4.9.1 -- on the way to 1.5
[fw/altos]
/
ao-bringup
/
turnon_telebt
diff --git
a/ao-bringup/turnon_telebt
b/ao-bringup/turnon_telebt
index 3b8bd3e449fbd654b4e944dcc3c17754b6b74a7d..c4902f31ff68e5f938148cc9db6bddaf364f2bb9 100755
(executable)
--- a/
ao-bringup/turnon_telebt
+++ b/
ao-bringup/turnon_telebt
@@
-1,5
+1,8
@@
#!/bin/sh
#!/bin/sh
+# serial number of the TeleDongle being used as the flash programmer
+DONGLE=612
+
if [ -x ../ao-tools/ao-load/ao-load ]; then
AOLOAD=../ao-tools/ao-load/ao-load
elif [ -x /usr/bin/ao-load ]; then
if [ -x ../ao-tools/ao-load/ao-load ]; then
AOLOAD=../ao-tools/ao-load/ao-load
elif [ -x /usr/bin/ao-load ]; then
@@
-18,12
+21,12
@@
else
exit 1
fi
exit 1
fi
-echo "TeleBT v
0
.1 Turn-On and Calibration Program"
-echo "Copyright 201
1
by Bdale Garbee. Released under GPL v2"
+echo "TeleBT v
1
.1 Turn-On and Calibration Program"
+echo "Copyright 201
3
by Bdale Garbee. Released under GPL v2"
echo
echo "Expectations:"
echo
echo "Expectations:"
-echo "\tTeleBT v
0
.1 powered from USB"
-echo "\t\twith TeleDonle (on /dev/ttyACM0) cabled to debug header"
+echo "\tTeleBT v
1
.1 powered from USB"
+echo "\t\twith TeleDonl
g
e (on /dev/ttyACM0) cabled to debug header"
echo "\t\twith coax from SMA to frequency counter"
echo
echo -n "TeleBT serial number: "
echo "\t\twith coax from SMA to frequency counter"
echo
echo -n "TeleBT serial number: "
@@
-31,18
+34,19
@@
read SERIAL
echo $RAWLOAD
echo $RAWLOAD
-$RAWLOAD -D
100
-r ao_led_blink.ihx
+$RAWLOAD -D
$DONGLE
-r ao_led_blink.ihx
echo "LEDs should be blinking"
sleep 5
echo "LEDs should be blinking"
sleep 5
-$RAWLOAD -D
100
-r ao_radio_xmit.ihx
+$RAWLOAD -D
$DONGLE
-r ao_radio_xmit.ihx
echo -n "Generating RF carrier. Please enter measured frequency: "
read FREQ
CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
echo "Programming flash with cal value " $CAL_VALUE
echo -n "Generating RF carrier. Please enter measured frequency: "
read FREQ
CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD -D
100 --cal $CAL_VALUE /usr/share/altos/telebt-v0.1
*.ihx $SERIAL
+$AOLOAD -D
$DONGLE --cal $CAL_VALUE /usr/share/altos/telebt-v1.0
*.ihx $SERIAL
echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
-echo "Unplug and replug USB, cu to the board, confirm freq and record power"
+echo $SERIAL","$CAL_VALUE >> cal_values
+echo "Unplug debug cable, power cycle, cu to the board, confirm freq and record power"