-6 prototypes have been built, of which 2 were installed in
-[2YikStik](http://www.gag.com/rockets/airframes/2YikStik/)
-and flown at LDRS 30 in early September 2011. Unfortunately, we experienced a
-mechanical failure in the airframe before going fast enough to get exciting
-data, but post-flight analysis suggested the TeleScience boards were working
-fine up until "the incident". A replacement airframe is under construction
-that we hope to fly at NCR's 2012 edition of Mile High Mayhem.
-
-The thermistor conditioning circuits in the current design are very tightly
-coupled to the particular model of EPCOS thermistor that we chose for 2YikStik.
-Before we could sell TeleScience, that needs to be addressed somehow.
+The thermistor conditioning circuits in the v0.1 design were too tightly
+coupled to the particular model of EPCOS thermistor that we chose for
+[2YikStik](http://www.gag.com/rockets/airframes/2YikStik/) and
+[YikStik3](http://www.gag.com/rockets/airframes/YikStik3/). A major
+revision of the board led to v0.2 which was never fully evaluated, because
+the prototypes of TeleScience were lost in the
+[Black Forest Fire](http://www.gag.com/blackforestfire.html).
+
+The biggest hurdle we need to overcome before re-starting this project is
+deciding what TeleScience should actually be. The challenge is that if the
+board is too "generic", it will be hard to use. If it's too "specific",
+knowing what functionality to actually include gets hard...
+
+As an alternative, if you want to connect custom sensors to a
+[TeleMetrum](../TeleMetrum/) or [TeleMega](../TeleMega/) board,
+you might want to investigate
+[AltOSCompanion](https://github.com/bdale/AltOSCompanion), which is an
+[Arduino](https://www.arduino.cc/) sketch for implementing a custom companion
+board!
+
+## [History of TeleScience](history) ##
+