-of files in more easily readable form.
-
-* These are from the v0.2 branch:
- * [schematic](v0.2/telemetrum.pdf)
- * [pcb artwork](v0.2/telemetrum.pcb.pdf)
- * [bill of materials](v0.2/partslist.csv)
-* These are as of the working-v0.1 tag:
- * [schematic](v0.1/telemetrum.pdf)
- * [pcb artwork](v0.1/telemetrum.pcb.pdf)
- * [bill of materials](v0.1/telemetrum.bom)
-
-We have firmware that works well enough that we now routinely allow TeleMetrum
-to control flights by firing ejection charges. We've flown v0.1 boards in
-rockets exceeding 50g acceleration, above Mach 1, and to altitudes greater
-than 12k feet AGL with great results. Keith wrote a ground station program
-called
-ao-view that logs telemetry to disk, displays current and max
-values for key parameters during flight, and even includes voice synthesis
-during the flight so that our eyes can stay on the rockets! We have post
-flight analysis software that makes it easy to extract data from the board,
-analyze it, and even generate KML files for viewing flights in GoogleEarth!
-More details on the software, including full source code and pre-built packages
-can be found on the [AltOS](../AltOS) page on this site.
-
-## Future Plans ##
-
-Work is underway on a second revision of TeleMetrum with the following changes:
-
-* stretch board length by 0.25 inches
-* adjust USB connector position to be flush with edge of board
-* eliminate temperature sensor, since baro sensor is already compensated and there's a sensor on the cc1111
-* eliminate serial port connector
-* integrate SkyTraq Venus GPS receiver and patch antenna on-board
-* change debug connector to 4 pin Tyco MicroMaTch
-* add 8 pin Tyco MicroMaTch connector for companion board interface
-* use v_lipo as pyro power, eliminating the huge 1000uF capacitor and instead
- adding ballast capacitance on the 3.3V rail to prevent brownouts
-* move all connectors, beeper, and GPS patch antenna to the "other side" of the board from the surface mount parts
-* add a rectangle of silk screen material for improved serial number labeling
-
-As of early December 2009, the layout work for v0.2 is done and we're busy
-verifying it and deciding exactly how we're going to build them. We hope to
-have first prototypes to test in time to show the new version at LCA in late
-January 2010. If it works out as well as we hope, v0.2 may be made available
-in assembled and tested form to others in the rocketry hobby who have
-expressed interest sometime in 2010.
+of the files for Production PCB version 3.0 in more easily readable form.
+
+* [schematic](v3.0/telemetrum-sch.pdf)
+* [pcb artwork](v3.0/telemetrum-pcb.pdf)
+* [bill of materials](v3.0/partslist.csv)
+
+Rockets we know of flying with TeleMetrum boards have exceeded 50g acceleration,
+been well above Mach 1, and reached altitudes
+greater than 25k feet AGL with great results. Keith's second generation
+ground station program called AltosUI works on Windows, Mac, and Linux systems
+and logs telemetry to disk, displays current and max values for key parameters
+during flight, includes voice synthesis during the flight so that
+our eyes can stay on the rockets, and even includes live display of rocket
+position over moving maps! After flight, altosui can extract the
+complete flight log from TeleMetrum, can display plots of the data from either
+the telemetry received by radio or the onboard flight log, can output a kml
+file for use with [Google Earth](http://earth.google.com), and can also
+output all the flight data as a csv file for easy import to spreadsheet
+programs or other analysis tools allowing you to perform whatever
+custom analysis you can envision! More details on the software,
+including full source code and pre-built packages
+can be found on the [AltOS](../AltOS) page on this site. Feel free to
+download the software and try it before purchasing our hardware!
+
+## [History of TeleMetrum](history) ##
+