-of files in more easily readable form. These are all as of the working-v0.1
-tag:
-
-* [schematic](telemetrum.pdf)
-* [pcb artwork](telemetrum.pcb.pdf)
-* [bill of materials](telemetrum.bom)
-
-
-We have firmware that is working well enough that we're starting to allow
-TeleMetrum to fire ejection charges. Keith has also written a ground station
-program called aoview that logs telemetry to disk, displays current and max
-values for key parameters during flight, and even includes voice synthesis
-during the flight so that our eyes can stay on the rockets! The source to all
-this is available from [git.gag.com](http://git.gag.com) in the project
-[fw/altos](http://git.gag.com/?p=fw/altos;a=summary). This repository includes
-sources for the firmware, ground station program, and related utilities. Note
-that actually building these sources requires a modifified version of sdcc,
-for which we have not published diffs since they are in the process of being
-accepted upstream. Watch this space for more details.
-
-## Future Plans ##
-
-Work is underway on a second revision of TeleMetrum with the following changes:
-
-* stretch board length by 0.25 inches
-* adjust USB connector position to be flush with edge of board
-* eliminate beeper
-* eliminate temperature sensor, since baro sensor is already compensated and there's a sensor on the cc1111
-* eliminate serial port connector
-* integrate MN5010HS GPS receiver and chip antenna on-board
-* change debug connector to 4 pin 1.25mm connector as was used for serial port
-* add 7 pin 1.25mm connector for companion board interface
-* use v_lipo as pyro power, eliminating the huge 1000uF capacitor and instead
- adding ballast capacitors on the 3.3V rail to prevent brownouts
-* add a rectangle of silk screen material for improved serial number labeling
-
-We hope to build and fly prototypes of this version in late 2009. If it works
-out as well as we hope, this version may be made available in assembled and
-tested form to others in the rocketry hobby who have expressed interest.
+of the files for Production PCB version 3.0 in more easily readable form.
+
+* [schematic](v3.0/telemetrum-sch.pdf)
+* [pcb artwork](v3.0/telemetrum-pcb.pdf)
+* [bill of materials](v3.0/partslist.csv)
+
+Rockets we know of flying with TeleMetrum boards have exceeded 50g acceleration,
+been well above Mach 1, and reached altitudes
+greater than 25k feet AGL with great results. Keith's second generation
+ground station program called AltosUI works on Windows, Mac, and Linux systems
+and logs telemetry to disk, displays current and max values for key parameters
+during flight, includes voice synthesis during the flight so that
+our eyes can stay on the rockets, and even includes live display of rocket
+position over moving maps! After flight, altosui can extract the
+complete flight log from TeleMetrum, can display plots of the data from either
+the telemetry received by radio or the onboard flight log, can output a kml
+file for use with [Google Earth](http://earth.google.com), and can also
+output all the flight data as a csv file for easy import to spreadsheet
+programs or other analysis tools allowing you to perform whatever
+custom analysis you can envision! More details on the software,
+including full source code and pre-built packages
+can be found on the [AltOS](../AltOS) page on this site. Feel free to
+download the software and try it before purchasing our hardware!
+
+## [History of TeleMetrum](history) ##
+