update docs

[web/altusmetrum] / TeleMega / index.mdwn

diff --git a/TeleMega/index.mdwn b/TeleMega/index.mdwn
index 5f9773005d578bed3805376ea3c3d0d9637fe9d2..cbc96b1ea39e8b79bae5459a49101a49211ae26f 100644 (file)
--- a/TeleMega/index.mdwn
+++ b/TeleMega/index.mdwn
@@ -1,3 +1,4 @@
+[[!meta title="TeleMega"]]

 # TeleMega
 
 This is a high-end recording dual-deploy altimeter for high power model 
 # TeleMega
 
 This is a high-end recording dual-deploy altimeter for high power model 


@@ -8,10 +9,10 @@ can be based on time and various flight events and status, including angle
 from vertical.
 
 For the latest TeleMega firmware and related ground station software, please
 from vertical.
 
 For the latest TeleMega firmware and related ground station software, please

-visit the [AltOS](../AltOS) page on this site.  TeleMega requires AltOS
-version 1.3 or later.
+visit the [AltOS](../AltOS) page on this site.  TeleMega v2.0 requires AltOS
+version 1.6.2 or later.

 
 

-These are photos of the current production version 1.0:
+These are photos of production version 1.0 .. photos of 2.0 coming soon:

 
 <a href="v1.0/telemega-v1.0-top.jpg"> <img src="v1.0/telemega-v1.0-top-thumb.jpg"></a>
 <a href="v1.0/telemega-v1.0-bottom.jpg"> <img src="v1.0/telemega-v1.0-bottom-thumb.jpg"></a>
 
 <a href="v1.0/telemega-v1.0-top.jpg"> <img src="v1.0/telemega-v1.0-top-thumb.jpg"></a>
 <a href="v1.0/telemega-v1.0-bottom.jpg"> <img src="v1.0/telemega-v1.0-bottom-thumb.jpg"></a>


@@ -28,11 +29,12 @@ These are photos of the current production version 1.0:
 * 70cm ham-band transceiver for telemetry downlink
 * Barometric pressure sensor good to 100k feet MSL
 * 1-axis 105-g accelerometer for motor characterization
 * 70cm ham-band transceiver for telemetry downlink
 * Barometric pressure sensor good to 100k feet MSL
 * 1-axis 105-g accelerometer for motor characterization

-* 3-axis 18-g accelerometer for gyro calibration
+* 3-axis 16-g accelerometer for gyro calibration

 * 3-axis 2000 deg/sec gyros
 * 3-axis magnetic sensor
 * On-board, integrated GPS receiver
 * On-board non-volatile memory for flight data storage
 * 3-axis 2000 deg/sec gyros
 * 3-axis magnetic sensor
 * On-board, integrated GPS receiver
 * On-board non-volatile memory for flight data storage

+* Can drive up to 4 RC-style servos

 * USB for power, configuration, and data recovery
 * Integrated support for LiPo rechargeable batteries
 * User choice of pyro battery configuration, can use primary LiPo or any
 * USB for power, configuration, and data recovery
 * Integrated support for LiPo rechargeable batteries
 * User choice of pyro battery configuration, can use primary LiPo or any


@@ -41,11 +43,11 @@ These are photos of the current production version 1.0:
 
 ### Developer View ###
 
 
 ### Developer View ###
 

-* Hardware Features of v0.3
+* Hardware Features of v2.0

        * ST Micros [STM32L151](http://www.st.com/internet/mcu/product/248821.jsp) ARM Cortex M3 based Microcontroller
        * ST Micros [STM32L151](http://www.st.com/internet/mcu/product/248821.jsp) ARM Cortex M3 based Microcontroller

-       * TI [CC1120](http://www.ti.com/product/cc1120) High Performance RF Transceiver for Narrowband Systems 
+       * TI [CC1200](http://www.ti.com/product/cc1200) High Performance RF Transceiver for Narrowband Systems 

        * 150mA 3.3V LDO regulator
        * 150mA 3.3V LDO regulator

-       * [Winbond W25Q64CV](http://www.winbond.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/SerialFlash/W25Q64CV.htm) serial flash memory
+       * [Winbond W25Q64FV](http://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q64FV) serial flash memory

        * [u-blox](http://www.u-blox.com/) MAX-7Q GPS receiver
                * on-board TaoGlas passive patch antenna
                * async serial interface
        * [u-blox](http://www.u-blox.com/) MAX-7Q GPS receiver
                * on-board TaoGlas passive patch antenna
                * async serial interface


@@ -77,17 +79,23 @@ There is a single manual for TeleMega and most other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 

+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemega-outline.pdf) format.
+

 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemega](http://git.gag.com/?p=hw/telemega;a=summary).  
 
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemega](http://git.gag.com/?p=hw/telemega;a=summary).  
 
 For those who don't have ready access to the gEDA suite, here are pdf snapshots

-of the files for Production PCB version 1.0 in more easily readable form:
+of the files for Production PCB version 2.0 in more easily readable form:

 
 

-* [schematic](v1.0/telemega-sch.pdf)
-* [pcb artwork](v1.0/telemega-pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
+* [schematic](v2.0/telemega-sch.pdf)
+* [pcb artwork](v2.0/telemega-pcb.pdf)
+* [bill of materials](v2.0/partslist.csv)

 
 ## Future Plans ##
 
 
 ## Future Plans ##
 

-Version 1.0 is now available for purchase.
+Version 2.0 is now available for purchase.
+
+## [History of TeleMega](history) ##
+