easytimer prototypes loaded

[web/altusmetrum] / EasyMini / index.mdwn

diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index 8bb963ce43c2c84b94c55300cea7a38019f97695..95316a05318c6b24d6e9af18f0b1fea6120c0e68 100644 (file)
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -1,20 +1,21 @@
+[[!meta title="EasyMini"]]

 # EasyMini
 
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 
 # EasyMini
 
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 

-EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web 
-store, and should be available from our distributors soon.
+EasyMini version 2.0 is available from the
+[Garbee and Garbee](https://shop.gag.com) web store
+and from our distributors.

 
 

-For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.  EasyMini requires AltOS
-version 1.3 or later.
+For the latest EasyMini firmware and related ground station software,
+please visit the [AltOS](../AltOS) page on this site.  EasyMini
+version 2.0 requires AltOS version 1.8.4 or later.

 
 

-These are photos of a prototype version, we haven't take photos of the 
-production units yet:
+These are photos of version 2.0:

 
 

-<a href="v0.2/easymini-top.jpg"> <img src="v0.2/easymini-top-thumb.jpg"></a>
-<a href="v0.2/easymini-parts.jpg"> <img src="v0.2/easymini-parts-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-top.jpg"> <img src="v2.0/easymini-v2.0-top-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-bottom.jpg"> <img src="v2.0/easymini-v2.0-bottom-thumb.jpg"></a>

 
 ## Features ##
 
 
 ## Features ##
 


@@ -25,12 +26,13 @@ production units yet:
 * Barometric pressure sensor good to 100k feet MSL
 * Designed to use a battery supplying 3.7V-12V.
 * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
 * Barometric pressure sensor good to 100k feet MSL
 * Designed to use a battery supplying 3.7V-12V.
 * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube

-* 2MB on-board data logging flash
+* 1MB on-board data logging flash
+* Weighs only 6.5g (less than 1/4 oz)

 
 ### Developer View ###
 
 * Hardware Features
 
 ### Developer View ###
 
 * Hardware Features

-       * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip
+       * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip

                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM
                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM


@@ -53,9 +55,18 @@ production units yet:
 
 ## Artifacts ##
 
 
 ## Artifacts ##
 

-There is a single manual for EasyMini and all other Altus Metrum products,
-which is available in [html](../AltOS/doc/altusmetrum.html) and 
-[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+There is a shorter manual for EasyMini which is available in
+[html](../AltOS/doc/easymini.html) and
+[pdf](../AltOS/doc/easymini.pdf) formats. EasyMini is also documented
+in the comprehensive Altus Metrum manual in
+[html](../AltOS/doc/altusmetrum.html) and
+[pdf](../AltOS/doc/altusmetrum.pdf) formats
+
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/easymini-outline.pdf) format.
+
+Thanks to Bryan Duke, there's also a 3d model of EasyMini available on 
+[Thingiverse](http://www.thingiverse.com/thing:1946852). 

 
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).  
 
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).  


@@ -63,5 +74,10 @@ in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
 of the files for production PCB version 1.0 in more easily readable form.  
 
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
 of the files for production PCB version 1.0 in more easily readable form.  
 

-* [schematic](v1.0/easymini-sch.pdf)
-* [pcb artwork](v1.0/easymini-pcb.pdf)
+* [schematic](v2.0/easymini-sch.pdf)
+* [pcb artwork](v2.0/easymini-pcb.pdf)
+
+## Older Version ##
+
+Easy Mini [version 1.0](v1.0) was largely the same design but used a
+different processor.