Release 1.9.7

[web/altusmetrum] / EasyMini / index.mdwn

diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index 0dd1cfb21586453fb5f83abf987415c4d4138ccd..5c6b91faff19d1ae283ef8e43b65fa3fc7028431 100644 (file)
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -1,21 +1,21 @@
-[[!meta title EasyMini]]
+[[!meta title="EasyMini"]]

 # EasyMini
 
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 
 # EasyMini
 
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 

-EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web 
-store, and should be available from our distributors soon.
+EasyMini version 2.0 is available from the
+[Garbee and Garbee](https://shop.gag.com) web store
+and from our distributors.

 
 

-For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.  EasyMini requires AltOS
-version 1.3 or later.
+For the latest EasyMini firmware and related ground station software,
+please visit the [AltOS](../AltOS) page on this site.  EasyMini
+version 2.0 requires AltOS version 1.8.4 or later.

 
 

-These are photos of a prototype version, we haven't take photos of the 
-production units yet:
+These are photos of version 2.0:

 
 

-<a href="v0.2/easymini-top.jpg"> <img src="v0.2/easymini-top-thumb.jpg"></a>
-<a href="v0.2/easymini-parts.jpg"> <img src="v0.2/easymini-parts-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-top.jpg"> <img src="v2.0/easymini-v2.0-top-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-bottom.jpg"> <img src="v2.0/easymini-v2.0-bottom-thumb.jpg"></a>

 
 ## Features ##
 
 
 ## Features ##
 


@@ -26,13 +26,13 @@ production units yet:
 * Barometric pressure sensor good to 100k feet MSL
 * Designed to use a battery supplying 3.7V-12V.
 * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
 * Barometric pressure sensor good to 100k feet MSL
 * Designed to use a battery supplying 3.7V-12V.
 * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube

-* 2MB on-board data logging flash
+* 1MB on-board data logging flash

 * Weighs only 6.5g (less than 1/4 oz)
 
 ### Developer View ###
 
 * Hardware Features
 * Weighs only 6.5g (less than 1/4 oz)
 
 ### Developer View ###
 
 * Hardware Features

-       * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip
+       * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip

                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM
                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM


@@ -63,7 +63,7 @@ in the comprehensive Altus Metrum manual in
 [pdf](../AltOS/doc/altusmetrum.pdf) formats
 
 An outline of the board with drill hole locations is available in
 [pdf](../AltOS/doc/altusmetrum.pdf) formats
 
 An outline of the board with drill hole locations is available in

-[pdf](../Documents/easymini-outline.pdf) format.
+[pdf](../AltOS/doc/easymini-outline.pdf) format.

 
 Thanks to Bryan Duke, there's also a 3d model of EasyMini available on 
 [Thingiverse](http://www.thingiverse.com/thing:1946852). 
 
 Thanks to Bryan Duke, there's also a 3d model of EasyMini available on 
 [Thingiverse](http://www.thingiverse.com/thing:1946852). 


@@ -74,5 +74,10 @@ in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
 of the files for production PCB version 1.0 in more easily readable form.  
 
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
 of the files for production PCB version 1.0 in more easily readable form.  
 

-* [schematic](v1.0/easymini-sch.pdf)
-* [pcb artwork](v1.0/easymini-pcb.pdf)
+* [schematic](v2.0/easymini-sch.pdf)
+* [pcb artwork](v2.0/easymini-pcb.pdf)
+
+## Older Version ##
+
+Easy Mini [version 1.0](v1.0) was largely the same design but used a
+different processor.