2 * Copyright © 2012 Keith Packard <keithp@keithp.com>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License along
15 * with this program; if not, write to the Free Software Foundation, Inc.,
16 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
23 #define stm_beeper stm_tim2
24 #define RCC_BEEPER STM_RCC_APB1ENR_TIM2EN
25 #elif BEEPER_TIMER == 3
26 #define stm_beeper stm_tim3
27 #define RCC_BEEPER STM_RCC_APB1ENR_TIM3EN
28 #elif BEEPER_TIMER == 4
29 #define stm_beeper stm_tim4
30 #define RCC_BEEPER STM_RCC_APB1ENR_TIM4EN
32 #error BEEPER_TIMER must be 2, 3 or 4
40 stm_rcc.apb1enr &= ~(1UL << RCC_BEEPER);
41 stm_gpio_conf(BEEPER_PORT, BEEPER_PIN,
42 STM_GPIO_CR_MODE_OUTPUT_2MHZ,
43 STM_GPIO_CR_CNF_OUTPUT_PUSH_PULL);
45 stm_gpio_conf(BEEPER_PORT, BEEPER_PIN,
46 STM_GPIO_CR_MODE_OUTPUT_2MHZ,
47 STM_GPIO_CR_CNF_OUTPUT_AF_PUSH_PULL);
48 stm_rcc.apb1enr |= (1UL << RCC_BEEPER);
50 stm_beeper.cr2 = ((0 << STM_TIM234_CR2_TI1S) |
51 (STM_TIM234_CR2_MMS_RESET << STM_TIM234_CR2_MMS) |
52 (0 << STM_TIM234_CR2_CCDS));
54 /* Set prescaler to match cc1111 clocks
56 stm_beeper.psc = AO_TIM23467_CLK / 750000;
58 /* 1. Select the counter clock (internal, external, prescaler).
60 * Setting SMCR to zero means use the internal clock
65 /* 2. Write the desired data in the TIMx_ARR and TIMx_CCRx registers. */
66 stm_beeper.arr = beep;
67 #if BEEPER_CHANNEL == 1
68 stm_beeper.ccr1 = beep;
69 #elif BEEPER_CHANNEL == 2
70 stm_beeper.ccr2 = beep;
71 #elif BEEPER_CHANNEL == 3
72 stm_beeper.ccr3 = beep;
73 #elif BEEPER_CHANNEL == 4
74 stm_beeper.ccr4 = beep;
76 #error invalid BEEPER_CHANNEL
79 /* 3. Set the CCxIE and/or CCxDE bits if an interrupt and/or a
80 * DMA request is to be generated.
84 /* 4. Select the output mode. For example, you must write
85 * OCxM=011, OCxPE=0, CCxP=0 and CCxE=1 to toggle OCx output
86 * pin when CNT matches CCRx, CCRx preload is not used, OCx
87 * is enabled and active high.
90 #define OC1M (BEEPER_CHANNEL == 1 ? STM_TIM234_CCMR1_OC1M_TOGGLE : STM_TIM234_CCMR1_OC1M_FROZEN)
91 #define OC2M (BEEPER_CHANNEL == 2 ? STM_TIM234_CCMR1_OC2M_TOGGLE : STM_TIM234_CCMR1_OC2M_FROZEN)
92 #define OC3M (BEEPER_CHANNEL == 3 ? STM_TIM234_CCMR2_OC3M_TOGGLE : STM_TIM234_CCMR2_OC3M_FROZEN)
93 #define OC4M (BEEPER_CHANNEL == 4 ? STM_TIM234_CCMR2_OC4M_TOGGLE : STM_TIM234_CCMR2_OC4M_FROZEN)
95 #define CCER(n) (BEEPER_CHANNEL == (n) ? 1 : 0)
97 #if BEEPER_CHANNEL == 1 || BEEPER_CHANNEL == 2
98 stm_beeper.ccmr1 = ((0 << STM_TIM234_CCMR1_OC2CE) |
99 (OC2M << STM_TIM234_CCMR1_OC2M) |
100 (0 << STM_TIM234_CCMR1_OC2PE) |
101 (0 << STM_TIM234_CCMR1_OC2FE) |
102 (STM_TIM234_CCMR1_CC2S_OUTPUT << STM_TIM234_CCMR1_CC2S) |
104 (0 << STM_TIM234_CCMR1_OC1CE) |
105 (OC1M << STM_TIM234_CCMR1_OC1M) |
106 (0 << STM_TIM234_CCMR1_OC1PE) |
107 (0 << STM_TIM234_CCMR1_OC1FE) |
108 (STM_TIM234_CCMR1_CC1S_OUTPUT << STM_TIM234_CCMR1_CC1S));
109 #elif BEEPER_CHANNEL == 3 || BEEPER_CHANNEL == 4
110 stm_beeper.ccmr2 = ((0 << STM_TIM234_CCMR2_OC4CE) |
111 (OC4M << STM_TIM234_CCMR2_OC4M) |
112 (0 << STM_TIM234_CCMR2_OC4PE) |
113 (0 << STM_TIM234_CCMR2_OC4FE) |
114 (STM_TIM234_CCMR2_CC4S_OUTPUT << STM_TIM234_CCMR2_CC4S) |
116 (0 << STM_TIM234_CCMR2_OC3CE) |
117 (OC3M << STM_TIM234_CCMR2_OC3M) |
118 (0 << STM_TIM234_CCMR2_OC3PE) |
119 (0 << STM_TIM234_CCMR2_OC3FE) |
120 (STM_TIM234_CCMR2_CC3S_OUTPUT << STM_TIM234_CCMR2_CC3S));
122 #error invalid BEEPER_CHANNEL
124 stm_beeper.ccer = ((0 << STM_TIM234_CCER_CC4NP) |
125 (0 << STM_TIM234_CCER_CC4P) |
126 (CCER(4) << STM_TIM234_CCER_CC4E) |
127 (0 << STM_TIM234_CCER_CC3NP) |
128 (0 << STM_TIM234_CCER_CC3P) |
129 (CCER(3) << STM_TIM234_CCER_CC3E) |
130 (0 << STM_TIM234_CCER_CC2NP) |
131 (0 << STM_TIM234_CCER_CC2P) |
132 (CCER(2) << STM_TIM234_CCER_CC2E) |
133 (0 << STM_TIM234_CCER_CC1NP) |
134 (0 << STM_TIM234_CCER_CC1P) |
135 (CCER(1) << STM_TIM234_CCER_CC1E));
137 /* 5. Enable the counter by setting the CEN bit in the TIMx_CR1 register. */
139 stm_beeper.cr1 = ((STM_TIM234_CR1_CKD_1 << STM_TIM234_CR1_CKD) |
140 (0 << STM_TIM234_CR1_ARPE) |
141 (STM_TIM234_CR1_CMS_EDGE << STM_TIM234_CR1_CMS) |
142 (0 << STM_TIM234_CR1_DIR) |
143 (0 << STM_TIM234_CR1_OPM) |
144 (0 << STM_TIM234_CR1_URS) |
145 (0 << STM_TIM234_CR1_UDIS) |
146 (1 << STM_TIM234_CR1_CEN));
148 /* Update the values */
149 stm_beeper.egr = (1 << STM_TIM234_EGR_UG);
154 ao_beep_for(uint8_t beep, AO_TICK_TYPE ticks)
164 #if BEEPER_TIMER == 2
165 if (BEEPER_PORT == &stm_gpioa) {
166 switch (BEEPER_PIN) {
171 stm_set_afio_mapr(STM_AFIO_MAPR_TIM2_REMAP,
172 STM_AFIO_MAPR_TIM2_REMAP_PA0_PA1_PA2_PA3,
173 STM_AFIO_MAPR_TIM2_REMAP_MASK);
176 ao_panic(AO_PANIC_CRASH);
180 #elif BEEPER_TIMER == 3
181 if (BEEPER_PORT == &stm_gpioa) {
182 switch (BEEPER_PIN) {
185 stm_set_afio_mapr(STM_AFIO_MAPR_TIM3_REMAP,
186 STM_AFIO_MAPR_TIM3_REMAP_PA6_PA7_PB0_PB1,
187 STM_AFIO_MAPR_TIM3_REMAP_MASK);
190 ao_panic(AO_PANIC_CRASH);
193 } else if (BEEPER_PORT == &stm_gpiob) {
194 switch (BEEPER_PIN) {
199 stm_set_afio_mapr(STM_AFIO_MAPR_TIM3_REMAP,
200 STM_AFIO_MAPR_TIM3_REMAP_PB4_PB5_PB0_PB1,
201 STM_AFIO_MAPR_TIM3_REMAP_MASK);
204 ao_panic(AO_PANIC_CRASH);
207 } else if (BEEPER_PORT == &stm_gpioc) {
208 switch (BEEPER_PIN) {
213 stm_set_afio_mapr(STM_AFIO_MAPR_TIM3_REMAP,
214 STM_AFIO_MAPR_TIM3_REMAP_PC6_PC7_PC8_PC9,
215 STM_AFIO_MAPR_TIM3_REMAP_MASK);
218 ao_panic(AO_PANIC_CRASH);
222 #elif BEEPER_TIMER == 4
223 ao_panic(AO_PANIC_CRASH);
225 ao_enable_output(BEEPER_PORT, BEEPER_PIN, 0);
227 /* Leave the timer off until requested */
228 stm_rcc.apb1enr &= ~(1UL << RCC_BEEPER);