2 * Copyright © 2012 Keith Packard <keithp@keithp.com>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; version 2 of the License.
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 * General Public License for more details.
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
18 /* Using TeleMetrum v1.9 board */
23 #define HAS_TASK_QUEUE 1
25 /* 8MHz High speed external crystal */
26 #define AO_HSE 8000000
28 /* PLLVCO = 96MHz (so that USB will work) */
30 #define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
32 /* SYSCLK = 32MHz (no need to go faster than CPU) */
34 #define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
36 /* HCLK = 32MHz (CPU clock) */
37 #define AO_AHB_PRESCALER 1
38 #define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
40 /* Run APB1 at 16MHz (HCLK/2) */
41 #define AO_APB1_PRESCALER 2
42 #define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
44 /* Run APB2 at 16MHz (HCLK/2) */
45 #define AO_APB2_PRESCALER 2
46 #define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
48 #define HAS_SERIAL_1 0
49 #define USE_SERIAL_1_STDIN 0
50 #define SERIAL_1_PB6_PB7 0
51 #define SERIAL_1_PA9_PA10 0
53 #define HAS_SERIAL_2 0
54 #define USE_SERIAL_2_STDIN 0
55 #define SERIAL_2_PA2_PA3 0
56 #define SERIAL_2_PD5_PD6 0
58 #define HAS_SERIAL_3 0
59 #define USE_SERIAL_3_STDIN 0
60 #define SERIAL_3_PB10_PB11 0
61 #define SERIAL_3_PC10_PC11 0
62 #define SERIAL_3_PD8_PD9 0
65 #define USE_INTERNAL_FLASH 1
66 #define USE_STORAGE_CONFIG 0
67 #define USE_EEPROM_CONFIG 1
71 #define HAS_TELEMETRY 0
75 #define SPI_1_PA5_PA6_PA7 0 /* Barometer */
76 #define SPI_1_PB3_PB4_PB5 0
77 #define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
80 #define SPI_2_PB13_PB14_PB15 1 /* Radio */
81 #define SPI_2_PD1_PD3_PD4 0
82 #define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
84 #define SPI_2_PORT (&stm_gpiob)
85 #define SPI_2_SCK_PIN 13
86 #define SPI_2_MISO_PIN 14
87 #define SPI_2_MOSI_PIN 15
89 #define PACKET_HAS_SLAVE 0
90 #define PACKET_HAS_MASTER 1
92 #define LOW_LEVEL_DEBUG 0
94 #define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
95 #define LED_PORT_0 (&stm_gpioc)
96 #define LED_PORT_0_MASK (0xffff)
97 #define LED_PORT_0_SHIFT 0
98 #define LED_PIN_RED 14
99 #define LED_PIN_GREEN 15
100 #define AO_LED_RED (1 << LED_PIN_RED)
101 #define AO_LED_GREEN (1 << LED_PIN_GREEN)
103 #define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
111 * Telemetry monitoring
113 #define HAS_MONITOR 1
114 #define LEGACY_MONITOR 0
115 #define HAS_MONITOR_PUT 1
116 #define AO_MONITOR_LED AO_LED_GREEN
122 /* gets pretty close to 434.550 */
124 #define AO_RADIO_CAL_DEFAULT 0x6ca333
126 #define AO_FEC_DEBUG 0
127 #define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
128 #define AO_CC1120_SPI_CS_PIN 2
129 #define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
130 #define AO_CC1120_SPI stm_spi2
132 #define AO_CC1120_INT_PORT (&stm_gpioa)
133 #define AO_CC1120_INT_PIN 3
135 #define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioa)
136 #define AO_CC1120_MCU_WAKEUP_PIN (4)
138 #define AO_CC1120_INT_GPIO 2
139 #define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2
141 #define AO_CC1120_MARC_GPIO 3
142 #define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3
145 * Profiling Viterbi decoding
152 #endif /* _AO_PINS_H_ */