2 * Copyright © 2009 Keith Packard <keithp@keithp.com>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License along
15 * with this program; if not, write to the Free Software Foundation, Inc.,
16 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
30 /* replace stdio macros with direct calls to our functions */
33 #define putchar(c) ao_putchar(c)
34 #define getchar ao_getchar
36 extern int ao_putchar(char c);
37 extern char ao_getchar(void);
43 typedef AO_PORT_TYPE ao_port_t;
48 #include <ao_notask.h>
55 #define AO_PANIC_NO_TASK 1 /* AO_NUM_TASKS is not large enough */
56 #define AO_PANIC_DMA 2 /* Attempt to start DMA while active */
57 #define AO_PANIC_MUTEX 3 /* Mis-using mutex API */
58 #define AO_PANIC_EE 4 /* Mis-using eeprom API */
59 #define AO_PANIC_LOG 5 /* Failing to read/write log data */
60 #define AO_PANIC_CMD 6 /* Too many command sets registered */
61 #define AO_PANIC_STDIO 7 /* Too many stdio handlers registered */
62 #define AO_PANIC_REBOOT 8 /* Reboot failed */
63 #define AO_PANIC_FLASH 9 /* Invalid flash part (or wrong blocksize) */
64 #define AO_PANIC_USB 10 /* Trying to send USB packet while busy */
65 #define AO_PANIC_BT 11 /* Communications with bluetooth device failed */
66 #define AO_PANIC_STACK 12 /* Stack overflow */
67 #define AO_PANIC_SPI 13 /* SPI communication failure */
68 #define AO_PANIC_CRASH 14 /* Processor crashed */
69 #define AO_PANIC_BUFIO 15 /* Mis-using bufio API */
70 #define AO_PANIC_EXTI 16 /* Mis-using exti API */
71 #define AO_PANIC_FAST_TIMER 17 /* Mis-using fast timer API */
72 #define AO_PANIC_ADC 18 /* Mis-using ADC interface */
73 #define AO_PANIC_IRQ 19 /* interrupts not blocked */
74 #define AO_PANIC_SELF_TEST_CC1120 0x40 | 1 /* Self test failure */
75 #define AO_PANIC_SELF_TEST_HMC5883 0x40 | 2 /* Self test failure */
76 #define AO_PANIC_SELF_TEST_MPU6000 0x40 | 3 /* Self test failure */
77 #define AO_PANIC_SELF_TEST_MPU9250 0x40 | 3 /* Self test failure */
78 #define AO_PANIC_SELF_TEST_MS5607 0x40 | 4 /* Self test failure */
79 #define AO_PANIC_SELF_TEST_ADS124S0X 0x40 | 5 /* Self test failure */
81 /* Stop the operating system, beeping and blinking the reason */
83 ao_panic(uint8_t reason);
89 #define AO_ROMCONFIG_VERSION 2
91 extern AO_ROMCONFIG_SYMBOL uint16_t ao_romconfig_version;
92 extern AO_ROMCONFIG_SYMBOL uint16_t ao_romconfig_check;
93 extern AO_ROMCONFIG_SYMBOL uint16_t ao_serial_number;
95 extern AO_ROMCONFIG_SYMBOL uint32_t ao_radio_cal;
103 #define AO_TICK_TYPE uint16_t
104 #define AO_TICK_SIGNED int16_t
107 extern volatile AO_TICK_TYPE ao_tick_count;
109 /* Our timer runs at 100Hz */
113 #define AO_MS_TO_TICKS(ms) ((ms) / (1000 / AO_HERTZ))
114 #define AO_SEC_TO_TICKS(s) ((s) * AO_HERTZ)
116 /* Returns the current time in ticks */
120 /* Suspend the current task until ticks time has passed */
122 ao_delay(uint16_t ticks);
124 /* Set the ADC interval */
126 ao_timer_set_adc_interval(uint8_t interval);
128 /* Initialize the timer */
132 /* Initialize the hardware clock. Must be called first */
136 #if AO_POWER_MANAGEMENT
137 /* Go to low power clock */
139 ao_clock_suspend(void);
141 /* Restart full-speed clock */
143 ao_clock_resume(void);
152 ao_mutex_try(uint8_t *ao_mutex, uint8_t task_id);
155 ao_mutex_get(uint8_t *ao_mutex);
158 ao_mutex_put(uint8_t *ao_mutex);
167 ao_cmd_lex_error = 1,
168 ao_cmd_syntax_error = 2,
171 extern char ao_cmd_lex_c;
172 extern enum ao_cmd_status ao_cmd_status;
175 ao_put_string(const char *s);
178 ao_cmd_readline(const char *prompt);
184 ao_cmd_put8(uint8_t v);
187 ao_cmd_put16(uint16_t v);
190 ao_cmd_is_white(void);
196 ao_cmd_hexchar(char c);
199 ao_cmd_hexbyte(void);
205 ao_cmd_decimal(void);
207 /* Read a single hex nibble off stdin. */
212 ao_match_word(const char *word);
220 ao_cmd_register(const struct ao_cmds *cmds);
230 * Provided by an external module to filter raw command lines
247 #if LEDS_AVAILABLE || HAS_LED
256 #include <ao_storage.h>
264 #include <ao_flight.h>
265 #include <ao_sample.h>
272 #define AO_RDF_INTERVAL_TICKS AO_SEC_TO_TICKS(5)
273 #define AO_RDF_LENGTH_MS 500
274 #define AO_RDF_CONTINUITY_MS 32
275 #define AO_RDF_CONTINUITY_PAUSE 96
276 #define AO_RDF_CONTINUITY_TOTAL ((AO_RDF_CONTINUITY_PAUSE + AO_RDF_CONTINUITY_MS) * 3 + AO_RDF_CONTINUITY_PAUSE)
278 /* This assumes that we're generating a 1kHz tone, which
279 * modulates the carrier at 2kbps, or 250kBps
281 #define AO_MS_TO_RDF_LEN(ms) ((ms) / 4)
283 #define AO_RADIO_RDF_LEN AO_MS_TO_RDF_LEN(AO_RDF_LENGTH_MS)
284 #define AO_RADIO_CONT_TONE_LEN AO_MS_TO_RDF_LEN(AO_RDF_CONTINUITY_MS)
285 #define AO_RADIO_CONT_PAUSE_LEN AO_MS_TO_RDF_LEN(AO_RDF_CONTINUITY_PAUSE)
286 #define AO_RADIO_CONT_TOTAL_LEN AO_MS_TO_RDF_LEN(AO_RDF_CONTINUITY_TOTAL)
288 /* returns a value 0-3 to indicate igniter continuity */
290 ao_report_igniter(void);
293 ao_report_init(void);
298 * Given raw data, convert to SI units
302 /* pressure from the sensor to altitude in meters */
304 ao_pres_to_altitude(pres_t pres);
307 ao_altitude_to_pres(alt_t alt);
310 ao_temp_to_dC(int16_t temp);
316 * Convert between pressure in Pa and altitude in meters
323 ao_pa_to_altitude(pres_t pa);
326 ao_altitude_to_pa(alt_t alt);
333 #if HAS_SERIAL_0 || HAS_SERIAL_1 || HAS_SERIAL_2 || HAS_SERIAL_3
334 #include <ao_serial.h>
340 * Convert ADC readings to decivolts
344 ao_battery_decivolt(int16_t adc);
347 ao_ignite_decivolt(int16_t adc);
354 ao_spi_slave_recv(void *buf, uint16_t len);
357 ao_spi_slave_send(void *buf, uint16_t len);
360 ao_spi_slave_init(void);
362 /* This must be defined by the product; it will get called when chip
363 * select goes low, at which point it should use ao_spi_read and
364 * ao_spi_write to deal with the request
370 #include <ao_telemetry.h>
375 #define AO_GPS_NUM_SAT_MASK (0xf << 0)
376 #define AO_GPS_NUM_SAT_SHIFT (0)
378 #define AO_GPS_VALID (1 << 4)
379 #define AO_GPS_RUNNING (1 << 5)
380 #define AO_GPS_DATE_VALID (1 << 6)
381 #define AO_GPS_COURSE_VALID (1 << 7)
383 #define AO_GPS_NEW_DATA 1
384 #define AO_GPS_NEW_TRACKING 2
386 extern uint8_t ao_gps_new;
387 extern uint16_t ao_gps_tick;
388 extern uint8_t ao_gps_mutex;
389 extern struct ao_telemetry_location ao_gps_data;
390 extern struct ao_telemetry_satellite ao_gps_tracking_data;
400 int32_t latitude; /* degrees * 10⁷ */
401 int32_t longitude; /* degrees * 10⁷ */
402 int16_t altitude; /* m */
403 uint16_t ground_speed; /* cm/s */
404 uint8_t course; /* degrees / 2 */
405 uint8_t hdop; /* * 5 */
406 int16_t climb_rate; /* cm/s */
407 uint16_t h_error; /* m */
408 uint16_t v_error; /* m */
411 struct ao_gps_sat_orig {
416 #define AO_MAX_GPS_TRACKING 12
418 struct ao_gps_tracking_orig {
420 struct ao_gps_sat_orig sats[AO_MAX_GPS_TRACKING];
424 ao_gps_set_rate(uint8_t rate);
430 ao_gps_print(struct ao_gps_orig *gps_data);
433 ao_gps_tracking_print(struct ao_gps_tracking_orig *gps_tracking_data);
449 ao_gps_report_init(void);
452 * ao_gps_report_mega.c
456 ao_gps_report_mega(void);
459 ao_gps_report_mega_init(void);
462 * ao_telemetry_orig.c
467 uint16_t tick; /* tick when the sample was read */
468 int16_t accel; /* accelerometer */
469 int16_t pres; /* pressure sensor */
470 int16_t temp; /* temperature sensor */
471 int16_t v_batt; /* battery voltage */
472 int16_t sense_d; /* drogue continuity sense */
473 int16_t sense_m; /* main continuity sense */
476 struct ao_telemetry_orig {
479 uint8_t flight_state;
481 int16_t ground_accel;
491 int16_t accel_plus_g;
492 int16_t accel_minus_g;
493 struct ao_adc_orig adc;
494 struct ao_gps_orig gps;
495 char callsign[AO_MAX_CALLSIGN];
496 struct ao_gps_tracking_orig gps_tracking;
499 struct ao_telemetry_tiny {
502 uint8_t flight_state;
503 int16_t height; /* AGL in meters */
504 int16_t speed; /* in m/s * 16 */
505 int16_t accel; /* in m/s² * 16 */
506 int16_t ground_pres; /* sensor units */
507 struct ao_adc adc; /* raw ADC readings */
508 char callsign[AO_MAX_CALLSIGN];
511 struct ao_telemetry_orig_recv {
512 struct ao_telemetry_orig telemetry_orig;
517 struct ao_telemetry_tiny_recv {
518 struct ao_telemetry_tiny telemetry_tiny;
523 #endif /* LEGACY_MONITOR */
525 /* Unfortunately, we've exposed the CC1111 rssi units as the 'usual' method
526 * for reporting RSSI. So, now we use these values everywhere
528 #define AO_RSSI_FROM_RADIO(radio) ((int16_t) ((int8_t) (radio) >> 1) - 74)
529 #define AO_RADIO_FROM_RSSI(rssi) (((int8_t) (rssi) + 74) << 1)
532 * ao_radio_recv tacks on rssi and status bytes
535 struct ao_telemetry_raw_recv {
536 uint8_t packet[AO_MAX_TELEMETRY + 2];
539 /* Set delay between telemetry reports (0 to disable) */
541 #define AO_TELEMETRY_INTERVAL_PAD AO_MS_TO_TICKS(1000)
542 #define AO_TELEMETRY_INTERVAL_FLIGHT AO_MS_TO_TICKS(100)
543 #define AO_TELEMETRY_INTERVAL_RECOVER AO_MS_TO_TICKS(1000)
546 ao_telemetry_reset_interval(void);
549 ao_telemetry_set_interval(uint16_t interval);
552 ao_rdf_set(uint8_t rdf);
555 ao_telemetry_init(void);
558 ao_telemetry_orig_init(void);
561 ao_telemetry_tiny_init(void);
567 extern uint8_t ao_radio_dma;
569 extern int8_t ao_radio_rssi;
571 #ifdef PKT_APPEND_STATUS_1_CRC_OK
572 #define AO_RADIO_STATUS_CRC_OK PKT_APPEND_STATUS_1_CRC_OK
575 #define AO_RADIO_STATUS_CRC_OK AO_FEC_DECODE_CRC_OK
578 #ifndef HAS_RADIO_RECV
579 #define HAS_RADIO_RECV HAS_RADIO
581 #ifndef HAS_RADIO_XMIT
582 #define HAS_RADIO_XMIT HAS_RADIO
585 #define AO_RADIO_RATE_38400 0
586 #define AO_RADIO_RATE_9600 1
587 #define AO_RADIO_RATE_2400 2
588 #define AO_RADIO_RATE_MAX AO_RADIO_RATE_2400
590 #if defined(HAS_RADIO) && !defined(HAS_RADIO_RATE)
591 #define HAS_RADIO_RATE HAS_RADIO
596 ao_radio_send(const void *d, uint8_t size);
601 ao_radio_recv(void *d, uint8_t size, uint8_t timeout);
604 ao_radio_recv_abort(void);
608 ao_radio_test(uint8_t on);
610 typedef int16_t (*ao_radio_fill_func)(uint8_t *buffer, int16_t len);
613 ao_radio_send_aprs(ao_radio_fill_func fill);
621 ao_radio_pa_on(void);
624 ao_radio_pa_off(void);
627 ao_radio_pa_init(void);
629 #define ao_radio_pa_on()
630 #define ao_radio_pa_off()
631 #define ao_radio_pa_init()
635 * Compute the packet length as follows:
637 * 2000 bps (for a 1kHz tone)
638 * so, for 'ms' milliseconds, we need
639 * 2 * ms bits, or ms / 4 bytes
646 ao_radio_continuity(uint8_t c);
649 ao_radio_rdf_abort(void);
652 ao_radio_test_on(void);
655 ao_radio_test_off(void);
666 extern const char * const ao_state_names[];
668 #define AO_MONITOR_RING 8
671 struct ao_telemetry_raw_recv raw;
672 struct ao_telemetry_all_recv all;
674 struct ao_telemetry_orig_recv orig;
675 struct ao_telemetry_tiny_recv tiny;
679 extern union ao_monitor ao_monitor_ring[AO_MONITOR_RING];
681 #define ao_monitor_ring_next(n) (((n) + 1) & (AO_MONITOR_RING - 1))
682 #define ao_monitor_ring_prev(n) (((n) - 1) & (AO_MONITOR_RING - 1))
684 extern uint8_t ao_monitoring_mutex;
685 extern uint8_t ao_monitoring;
686 extern uint8_t ao_monitor_head;
691 #define AO_MONITORING_OFF 0
692 #define AO_MONITORING_ORIG 1
695 ao_monitor_set(uint8_t monitoring);
698 ao_monitor_disable(void);
701 ao_monitor_enable(void);
704 ao_monitor_init(void);
712 #define AO_READ_AGAIN (-1)
715 int (*_pollchar)(void); /* Called with interrupts blocked */
716 void (*putchar)(char c);
721 extern struct ao_stdio ao_stdios[];
722 extern int8_t ao_cur_stdio;
723 extern int8_t ao_num_stdios;
728 extern uint8_t ao_stdin_ready;
734 ao_add_stdio(int (*pollchar)(void),
735 void (*putchar)(char) ,
736 void (*flush)(void));
743 ao_igniter_drogue = 0,
748 ao_ignite(enum ao_igniter igniter);
750 enum ao_igniter_status {
751 ao_igniter_unknown, /* unknown status (ambiguous voltage) */
752 ao_igniter_ready, /* continuity detected */
753 ao_igniter_active, /* igniter firing */
754 ao_igniter_open, /* open circuit detected */
763 extern const char * const ao_igniter_status_names[];
765 extern struct ao_ignition ao_ignition[2];
767 enum ao_igniter_status
768 ao_igniter_status(enum ao_igniter igniter);
770 extern uint8_t ao_igniter_present;
773 ao_ignite_set_pins(void);
776 ao_igniter_init(void);
781 #include <ao_config.h>
789 * Set this to force the frequency to 434.550MHz
791 extern uint8_t ao_force_freq;
800 ao_rssi_set(int16_t rssi_value);
803 ao_rssi_init(AO_LED_TYPE rssi_led);
809 * values which need to be defined for
810 * each instance of a product
813 extern const char ao_version[];
814 extern const char ao_manufacturer[];
815 extern const char ao_product[];
821 #define AO_FIFO_SIZE 32
826 char fifo[AO_FIFO_SIZE];
829 #define ao_fifo_insert(f,c) do { \
830 (f).fifo[(f).insert] = (c); \
831 (f).insert = ((f).insert + 1) & (AO_FIFO_SIZE-1); \
834 #define ao_fifo_remove(f,c) do {\
835 c = (f).fifo[(f).remove]; \
836 (f).remove = ((f).remove + 1) & (AO_FIFO_SIZE-1); \
839 #define ao_fifo_full(f) ((((f).insert + 1) & (AO_FIFO_SIZE-1)) == (f).remove)
840 #define ao_fifo_mostly(f) ((((f).insert - (f).remove) & (AO_FIFO_SIZE-1)) >= (AO_FIFO_SIZE * 3 / 4))
841 #define ao_fifo_barely(f) ((((f).insert - (f).remove) & (AO_FIFO_SIZE-1)) >= (AO_FIFO_SIZE * 1 / 4))
842 #define ao_fifo_empty(f) ((f).insert == (f).remove)
844 #if PACKET_HAS_MASTER || PACKET_HAS_SLAVE
845 #include <ao_packet.h>
853 #include <ao_companion.h>
868 #define AO_LOG_TELESCIENCE_START ((uint8_t) 's')
869 #define AO_LOG_TELESCIENCE_DATA ((uint8_t) 'd')
871 #define AO_LOG_TELESCIENCE_NUM_ADC 12
873 struct ao_log_telescience {
880 uint16_t adc[AO_LOG_TELESCIENCE_NUM_ADC];
883 #define AO_LOG_SINGLE_SIZE 32
885 union ao_log_single {
886 struct ao_log_telescience telescience;
887 union ao_telemetry_all telemetry;
888 uint8_t bytes[AO_LOG_SINGLE_SIZE];
891 extern union ao_log_single ao_log_single_write_data;
892 extern union ao_log_single ao_log_single_read_data;
895 ao_log_single_extra_query(void);
898 ao_log_single_list(void);
901 ao_log_single_main(void);
904 ao_log_single_write(void);
907 ao_log_single_read(uint32_t pos);
910 ao_log_single_start(void);
913 ao_log_single_stop(void);
916 ao_log_single_restart(void);
919 ao_log_single_set(void);
922 ao_log_single_delete(void);
925 ao_log_single_init(void);
934 #define AO_TELEPYRO_NUM_ADC 9
937 #define ao_xmemcpy(d,s,c) memcpy(d,s,c)
938 #define ao_xmemset(d,v,c) memset(d,v,c)
939 #define ao_xmemcmp(d,s,c) memcmp(d,s,c)
947 ao_terraui_init(void);
955 ao_battery_get(void);
958 ao_battery_init(void);
959 #endif /* BATTERY_PIN */
966 ao_sqrt(uint32_t op);
972 int32_t ao_freq_to_set(int32_t freq, int32_t cal);
978 void ao_ms5607_init(void);
980 #include <ao_arch_funcs.h>