2 * Copyright © 2011 Keith Packard <keithp@keithp.com>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; version 2 of the License.
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 * General Public License for more details.
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
20 __xdata struct ao_fifo ao_serial1_rx_fifo;
21 __xdata struct ao_fifo ao_serial1_tx_fifo;
28 loop_until_bit_is_set(UCSR1A, UDRE1);
34 if (!ao_fifo_full(ao_serial1_rx_fifo))
35 ao_fifo_insert(ao_serial1_rx_fifo, UDR1);
36 ao_wakeup(&ao_serial1_rx_fifo);
37 #if USE_SERIAL_1_STDIN
38 ao_wakeup(&ao_stdin_ready);
42 static __xdata uint8_t ao_serial_tx1_started;
45 ao_serial1_tx_start(void)
47 if (!ao_fifo_empty(ao_serial1_tx_fifo) &&
48 !ao_serial_tx1_started)
50 ao_serial_tx1_started = 1;
51 ao_fifo_remove(ao_serial1_tx_fifo, UDR1);
57 ao_serial1_tx_started = 0;
58 ao_serial1_tx_start();
59 ao_wakeup(&ao_serial1_tx_fifo);
62 #if USE_SERIAL_1_STDIN
64 _ao_serial1_pollchar(void)
67 if (ao_fifo_empty(ao_serial1_rx_fifo)) {
71 ao_fifo_remove(ao_serial1_rx_fifo,c);
77 ao_serial1_getchar(void) __critical
81 ao_arch_block_interrupts();
82 while (ao_fifo_empty(ao_serial1_rx_fifo))
83 ao_sleep(&ao_serial1_rx_fifo);
84 ao_fifo_remove(ao_serial1_rx_fifo, c);
85 ao_arch_release_interrupts();
90 ao_serial1_putchar(char c)
92 ao_arch_block_interrupts();
93 while (ao_fifo_full(ao_serial1_tx_fifo))
94 ao_sleep(&ao_serial1_tx_fifo);
95 ao_fifo_insert(ao_serial1_tx_fifo, c);
96 ao_serial_tx1_start();
97 ao_arch_release_interrupts();
101 ao_serial1_drain(void) __critical
103 ao_arch_block_interrupts();
104 while (!ao_fifo_empty(ao_serial1_tx_fifo))
105 ao_sleep(&ao_serial1_tx_fifo);
106 ao_arch_release_interrupts();
109 static const struct {
111 } ao_serial_speeds[] = {
112 /* [AO_SERIAL_SPEED_4800] = */ {
113 F_CPU / (16UL * 4800UL) - 1
115 /* [AO_SERIAL_SPEED_9600] = */ {
116 F_CPU / (16UL * 9600UL) - 1
118 /* [AO_SERIAL_SPEED_19200] = */ {
119 F_CPU / (16UL * 19200UL) - 1
121 /* [AO_SERIAL_SPEED_57600] = */ {
122 F_CPU / (16UL * 57600UL) - 1
127 ao_serial1_set_speed(uint8_t speed)
130 if (speed > AO_SERIAL_SPEED_57600)
132 UBRR1L = ao_serial_speeds[speed].ubrr;
133 UBRR1H = ao_serial_speeds[speed].ubrr >> 8;
139 /* Ensure the uart is powered up */
141 PRR1 &= ~(1 << PRUSART1);
143 /* Pick a 9600 baud rate */
144 ao_serial_set_speed(AO_SERIAL_SPEED_9600);
147 UCSR1C = ((0 << UMSEL10) | /* Asynchronous mode */
148 (0 << UPM10) | /* No parity */
149 (0 << USBS1) | /* 1 stop bit */
150 (3 << UCSZ10) | /* 8 bit characters */
151 (0 << UCPOL1)); /* MBZ for async mode */
152 UCSR1B = ((1 << RXEN1) | /* Enable receiver */
153 (1 << TXEN1) | /* Enable transmitter */
154 (1 << RXCIE1) | /* Enable receive interrupts */
155 (1 << UDRIE1)); /* Enable transmit empty interrupts */
156 #if USE_SERIAL_1_STDIN
157 ao_add_stdio(_ao_serial1_pollchar,