1 == TeleGPS Quick Start Guide
3 TeleGPS is designed to be easy to use. Requiring no external
4 components, flying takes just a few steps.
6 First, download and install the software from
7 http://altusmetrum.org/AltOS. This will make sure that
8 you have the right device drivers installed.
10 Next, plug in the battery and USB cable and connect TeleGPS to
11 your computer. This will charge the battery and allow you to
14 Start the TeleGPS application and set the callsign and frequency
15 on your TeleGPS device; refer to the Configure TeleGPS section
16 in the TeleGPS Application chapter for instructions.
18 Unplug TeleGPS when the battery charger light goes green. This
19 will enable the radio and logging portions of the TeleGPS
22 Connect TeleDongle to your computer and start TeleGPS or start
23 AltosDroid on your android device and connect to TeleBT. Set the
24 frequency to match the TeleGPS and you should be receiving telemetry.