1 <?xml version="1.0" encoding="utf-8"?>
2 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3 "/usr/share/xml/docbook/schema/dtd/4.5/docbookx.dtd">
5 <title>The Altus Metrum System</title>
6 <subtitle>An Owner's Manual for Altus Metrum Rocketry Electronics</subtitle>
9 <firstname>Bdale</firstname>
10 <surname>Garbee</surname>
13 <firstname>Keith</firstname>
14 <surname>Packard</surname>
17 <firstname>Bob</firstname>
18 <surname>Finch</surname>
21 <firstname>Anthony</firstname>
22 <surname>Towns</surname>
26 <holder>Bdale Garbee and Keith Packard</holder>
30 This document is released under the terms of the
31 <ulink url="http://creativecommons.org/licenses/by-sa/3.0/">
32 Creative Commons ShareAlike 3.0
39 <revnumber>1.3.2</revnumber>
40 <date>24 January 2014</date>
42 Bug fixes for TeleMega and AltosUI.
46 <revnumber>1.3.1</revnumber>
47 <date>21 January 2014</date>
49 Bug fixes for TeleMega and TeleMetrum v2.0 along with a few
50 small UI improvements.
54 <revnumber>1.3</revnumber>
55 <date>12 November 2013</date>
57 Updated for software version 1.3. Version 1.3 adds support
58 for TeleMega, TeleMetrum v2.0, TeleMini v2.0 and EasyMini
59 and fixes bugs in AltosUI and the AltOS firmware.
63 <revnumber>1.2.1</revnumber>
64 <date>21 May 2013</date>
66 Updated for software version 1.2. Version 1.2 adds support
67 for TeleBT and AltosDroid. It also adds a few minor features
68 and fixes bugs in AltosUI and the AltOS firmware.
72 <revnumber>1.2</revnumber>
73 <date>18 April 2013</date>
75 Updated for software version 1.2. Version 1.2 adds support
76 for MicroPeak and the MicroPeak USB interface.
80 <revnumber>1.1.1</revnumber>
81 <date>16 September 2012</date>
83 Updated for software version 1.1.1 Version 1.1.1 fixes a few
84 bugs found in version 1.1.
88 <revnumber>1.1</revnumber>
89 <date>13 September 2012</date>
91 Updated for software version 1.1. Version 1.1 has new
92 features but is otherwise compatible with version 1.0.
96 <revnumber>1.0</revnumber>
97 <date>24 August 2011</date>
99 Updated for software version 1.0. Note that 1.0 represents a
100 telemetry format change, meaning both ends of a link
101 (TeleMetrum/TeleMini and TeleDongle) must be updated or
102 communications will fail.
106 <revnumber>0.9</revnumber>
107 <date>18 January 2011</date>
109 Updated for software version 0.9. Note that 0.9 represents a
110 telemetry format change, meaning both ends of a link (TeleMetrum and
111 TeleDongle) must be updated or communications will fail.
115 <revnumber>0.8</revnumber>
116 <date>24 November 2010</date>
117 <revremark>Updated for software version 0.8 </revremark>
122 <title>Acknowledgments</title>
124 Thanks to Bob Finch, W9YA, NAR 12965, TRA 12350 for writing “The
125 Mere-Mortals Quick Start/Usage Guide to the Altus Metrum Starter
126 Kit” which formed the basis of the original Getting Started chapter
127 in this manual. Bob was one of our first customers for a production
128 TeleMetrum, and his continued enthusiasm and contributions
129 are immensely gratifying and highly appreciated!
132 And thanks to Anthony (AJ) Towns for major contributions including
133 the AltosUI graphing and site map code and associated documentation.
134 Free software means that our customers and friends can become our
135 collaborators, and we certainly appreciate this level of
139 Have fun using these products, and we hope to meet all of you
140 out on the rocket flight line somewhere.
143 NAR #87103, TRA #12201
145 Keith Packard, KD7SQG
146 NAR #88757, TRA #12200
151 <title>Introduction and Overview</title>
153 Welcome to the Altus Metrum community! Our circuits and software reflect
154 our passion for both hobby rocketry and Free Software. We hope their
155 capabilities and performance will delight you in every way, but by
156 releasing all of our hardware and software designs under open licenses,
157 we also hope to empower you to take as active a role in our collective
161 The first device created for our community was TeleMetrum, a dual
162 deploy altimeter with fully integrated GPS and radio telemetry
163 as standard features, and a “companion interface” that will
164 support optional capabilities in the future. The latest version
165 of TeleMetrum, v2.0, has all of the same features but with
166 improved sensors and radio to offer increased performance.
169 Our second device was TeleMini, a dual deploy altimeter with
170 radio telemetry and radio direction finding. The first version
171 of this device was only 13mm by 38mm (½ inch by 1½ inches) and
172 could fit easily in an 18mm air-frame. The latest version, v2.0,
173 includes a beeper, USB data download and extended on-board
174 flight logging, along with an improved barometric sensor.
177 TeleMega is our most sophisticated device, including six pyro
178 channels (four of which are fully programmable), integrated GPS,
179 integrated gyroscopes for staging/air-start inhibit and high
180 performance telemetry.
183 EasyMini is a dual-deploy altimeter with logging and built-in
187 TeleDongle was our first ground station, providing a USB to RF
188 interfaces for communicating with the altimeters. Combined with
189 your choice of antenna and notebook computer, TeleDongle and our
190 associated user interface software form a complete ground
191 station capable of logging and displaying in-flight telemetry,
192 aiding rocket recovery, then processing and archiving flight
193 data for analysis and review.
196 For a slightly more portable ground station experience that also
197 provides direct rocket recovery support, TeleBT offers flight
198 monitoring and data logging using a Bluetooth™ connection between
199 the receiver and an Android device that has the AltosDroid
200 application installed from the Google Play store.
203 More products will be added to the Altus Metrum family over time, and
204 we currently envision that this will be a single, comprehensive manual
205 for the entire product family.
209 <title>Getting Started</title>
211 The first thing to do after you check the inventory of parts in your
212 “starter kit” is to charge the battery.
215 For TeleMetrum and TeleMega, the battery can be charged by plugging it into the
216 corresponding socket of the device and then using the USB
217 cable to plug the flight computer into your computer's USB socket. The
218 on-board circuitry will charge the battery whenever it is plugged
219 in, because the on-off switch does NOT control the
223 On TeleMetrum v1 boards, when the GPS chip is initially
224 searching for satellites, TeleMetrum will consume more current
225 than it pulls from the USB port, so the battery must be
226 attached in order to get satellite lock. Once GPS is locked,
227 the current consumption goes back down enough to enable charging
228 while running. So it's a good idea to fully charge the battery
229 as your first item of business so there is no issue getting and
230 maintaining satellite lock. The yellow charge indicator led
231 will go out when the battery is nearly full and the charger goes
232 to trickle charge. It can take several hours to fully recharge a
233 deeply discharged battery.
236 TeleMetrum v2.0 and TeleMega use a higher power battery charger,
237 allowing them to charge the battery while running the board at
238 maximum power. When the battery is charging, or when the board
239 is consuming a lot of power, the red LED will be lit. When the
240 battery is fully charged, the green LED will be lit. When the
241 battery is damaged or missing, both LEDs will be lit, which
245 The Lithium Polymer TeleMini and EasyMini battery can be charged by
246 disconnecting it from the board and plugging it into a
247 standalone battery charger such as the LipoCharger product
248 included in TeleMini Starter Kits, and connecting that via a USB
249 cable to a laptop or other USB power source.
252 You can also choose to use another battery with TeleMini v2.0
253 and EasyMini, anything supplying between 4 and 12 volts should
254 work fine (like a standard 9V battery), but if you are planning
255 to fire pyro charges, ground testing is required to verify that
256 the battery supplies enough current to fire your chosen e-matches.
259 The other active device in the starter kit is the TeleDongle USB to
260 RF interface. If you plug it in to your Mac or Linux computer it should
261 “just work”, showing up as a serial port device. Windows systems need
262 driver information that is part of the AltOS download to know that the
263 existing USB modem driver will work. We therefore recommend installing
264 our software before plugging in TeleDongle if you are using a Windows
265 computer. If you are using an older version of Linux and are having
266 problems, try moving to a fresher kernel (2.6.33 or newer).
269 Next you should obtain and install the AltOS software. The AltOS
270 distribution includes the AltosUI ground station program, current
272 images for all of the hardware, and a number of standalone
273 utilities that are rarely needed. Pre-built binary packages are
274 available for Linux, Microsoft Windows, and recent MacOSX
275 versions. Full source code and build instructions are also
276 available. The latest version may always be downloaded from
277 <ulink url="http://altusmetrum.org/AltOS"/>.
280 If you're using a TeleBT instead of the TeleDongle, you'll want to
281 install the AltosDroid application from the Google Play store on an
282 Android device. You don't need a data plan to use AltosDroid, but
283 without network access, the Map view will be less useful as it
284 won't contain any map data. You can also use TeleBT connected
285 over USB with your laptop computer; it acts exactly like a
286 TeleDongle. Anywhere this manual talks about TeleDongle, you can
287 also read that as 'and TeleBT when connected via USB'.
291 <title>Handling Precautions</title>
293 All Altus Metrum products are sophisticated electronic devices.
294 When handled gently and properly installed in an air-frame, they
295 will deliver impressive results. However, as with all electronic
296 devices, there are some precautions you must take.
299 The Lithium Polymer rechargeable batteries have an
300 extraordinary power density. This is great because we can fly with
301 much less battery mass than if we used alkaline batteries or previous
302 generation rechargeable batteries... but if they are punctured
303 or their leads are allowed to short, they can and will release their
305 Thus we recommend that you take some care when handling our batteries
306 and consider giving them some extra protection in your air-frame. We
307 often wrap them in suitable scraps of closed-cell packing foam before
308 strapping them down, for example.
311 The barometric sensors used on all of our flight computers are
312 sensitive to sunlight. In normal mounting situations, the baro sensor
313 and all of the other surface mount components
314 are “down” towards whatever the underlying mounting surface is, so
315 this is not normally a problem. Please consider this when designing an
316 installation in an air-frame with a see-through plastic payload bay. It
317 is particularly important to
318 consider this with TeleMini v1.0, both because the baro sensor is on the
319 “top” of the board, and because many model rockets with payload bays
320 use clear plastic for the payload bay! Replacing these with an opaque
321 cardboard tube, painting them, or wrapping them with a layer of masking
322 tape are all reasonable approaches to keep the sensor out of direct
326 The barometric sensor sampling port must be able to “breathe”,
327 both by not being covered by foam or tape or other materials that might
328 directly block the hole on the top of the sensor, and also by having a
329 suitable static vent to outside air.
332 As with all other rocketry electronics, Altus Metrum altimeters must
333 be protected from exposure to corrosive motor exhaust and ejection
338 <title>Altus Metrum Hardware</title>
340 <title>General Usage Instructions</title>
342 Here are general instructions for hooking up an Altus Metrum
343 flight computer. Instructions specific to each model will be
344 found in the section devoted to that model below.
347 To prevent electrical interference from affecting the
348 operation of the flight computer, it's important to always
349 twist pairs of wires connected to the board. Twist the switch
350 leads, the pyro leads and the battery leads. This reduces
351 interference through a mechanism called common mode rejection.
354 <title>Hooking Up Lithium Polymer Batteries</title>
356 All Altus Metrum flight computers have a two pin JST PH
357 series connector to connect up a single-cell Lithium Polymer
358 cell (3.7V nominal). You can purchase matching batteries
359 from the Altus Metrum store, or other vendors, or you can
360 make your own. Pin 1 of the connector is positive, pin 2 is
361 negative. Spark Fun sells a cable with the connector
362 attached, which they call a <ulink
363 url="https://www.sparkfun.com/products/9914">JST Jumper 2
364 Wire Assembly</ulink>.
367 Many RC vendors also sell lithium polymer batteries with
368 this same connector. All that we have found use the opposite
369 polarity, and if you use them that way, you will damage or
370 destroy the flight computer.
374 <title>Hooking Up Pyro Charges</title>
376 Altus Metrum flight computers always have two screws for
377 each pyro charge. This means you shouldn't need to put two
378 wires into a screw terminal or connect leads from pyro
379 charges together externally.
382 On the flight computer, one lead from each charge is hooked
383 to the positive battery terminal through the power switch.
384 The other lead is connected through the pyro circuit, which
385 is connected to the negative battery terminal when the pyro
390 <title>Hooking Up a Power Switch</title>
392 Altus Metrum flight computers need an external power switch
393 to turn them on. This disconnects both the computer and the
394 pyro charges from the battery, preventing the charges from
395 firing when in the Off position. The switch is in-line with
396 the positive battery terminal.
399 <title>Using an External Active Switch Circuit</title>
401 You can use an active switch circuit, such as the
402 Featherweight Magnetic Switch, with any Altus Metrum
403 flight computer. These require three connections, one to
404 the battery, one to the positive power input on the flight
405 computer and one to ground. Find instructions on how to
406 hook these up for each flight computer below. The follow
407 the instructions that come with your active switch to
413 <title>Using a Separate Pyro Battery</title>
415 As mentioned above in the section on hooking up pyro
416 charges, one lead for each of the pyro charges is connected
417 through the power switch directly to the positive battery
418 terminal. The other lead is connected to the pyro circuit,
419 which connects it to the negative battery terminal when the
420 pyro circuit is fired. The pyro circuit on all of the flight
421 computers is designed to handle up to 16V.
424 To use a separate pyro battery, connect the negative pyro
425 battery terminal to the flight computer ground terminal,
426 the positive battery terminal to the igniter and the other
427 igniter lead to the negative pyro terminal on the flight
428 computer. When the pyro channel fires, it will complete the
429 circuit between the negative pyro terminal and the ground
430 terminal, firing the igniter. Specific instructions on how
431 to hook this up will be found in each section below.
435 <title>Using a Different Kind of Battery</title>
437 EasyMini and TeleMini v2 are designed to use either a
438 lithium polymer battery or any other battery producing
439 between 4 and 12 volts, such as a rectangular 9V
440 battery. TeleMega and TeleMetrum are not designed for this,
441 and must only be powered by a lithium polymer battery. Find
442 instructions on how to use other batteries in the EasyMini
443 and TeleMini sections below.
448 <title>Specifications</title>
450 Here's the full set of Altus Metrum products, both in
451 production and retired.
454 <title>Altus Metrum Electronics</title>
455 <?dbfo keep-together="always"?>
456 <tgroup cols='8' align='center' colsep='1' rowsep='1'>
457 <colspec align='center' colwidth='*' colname='Device'/>
458 <colspec align='center' colwidth='*' colname='Barometer'/>
459 <colspec align='center' colwidth='*' colname='Z-axis accelerometer'/>
460 <colspec align='center' colwidth='*' colname='GPS'/>
461 <colspec align='center' colwidth='*' colname='3D sensors'/>
462 <colspec align='center' colwidth='*' colname='Storage'/>
463 <colspec align='center' colwidth='*' colname='RF'/>
464 <colspec align='center' colwidth='*' colname='Battery'/>
467 <entry align='center'>Device</entry>
468 <entry align='center'>Barometer</entry>
469 <entry align='center'>Z-axis accelerometer</entry>
470 <entry align='center'>GPS</entry>
471 <entry align='center'>3D sensors</entry>
472 <entry align='center'>Storage</entry>
473 <entry align='center'>RF Output</entry>
474 <entry align='center'>Battery</entry>
479 <entry>TeleMetrum v1.0</entry>
480 <entry><para>MP3H6115 10km (33k')</para></entry>
481 <entry><para>MMA2202 50g</para></entry>
482 <entry>SkyTraq</entry>
489 <entry>TeleMetrum v1.1</entry>
490 <entry><para>MP3H6115 10km (33k')</para></entry>
491 <entry><para>MMA2202 50g</para></entry>
492 <entry>SkyTraq</entry>
499 <entry>TeleMetrum v1.2</entry>
500 <entry><para>MP3H6115 10km (33k')</para></entry>
501 <entry><para>ADXL78 70g</para></entry>
502 <entry>SkyTraq</entry>
509 <entry>TeleMetrum v2.0</entry>
510 <entry><para>MS5607 30km (100k')</para></entry>
511 <entry><para>MMA6555 102g</para></entry>
512 <entry>uBlox Max-7Q</entry>
519 <entry><para>TeleMini <?linebreak?>v1.0</para></entry>
520 <entry><para>MP3H6115 10km (33k')</para></entry>
529 <entry>TeleMini <?linebreak?>v2.0</entry>
530 <entry><para>MS5607 30km (100k')</para></entry>
536 <entry>3.7-12V</entry>
539 <entry>EasyMini <?linebreak?>v1.0</entry>
540 <entry><para>MS5607 30km (100k')</para></entry>
546 <entry>3.7-12V</entry>
549 <entry>TeleMega <?linebreak?>v1.0</entry>
550 <entry><para>MS5607 30km (100k')</para></entry>
551 <entry><para>MMA6555 102g</para></entry>
552 <entry>uBlox Max-7Q</entry>
553 <entry><para>MPU6000 HMC5883</para></entry>
562 <title>Altus Metrum Boards</title>
563 <?dbfo keep-together="always"?>
564 <tgroup cols='6' align='center' colsep='1' rowsep='1'>
565 <colspec align='center' colwidth='*' colname='Device'/>
566 <colspec align='center' colwidth='*' colname='Connectors'/>
567 <colspec align='center' colwidth='*' colname='Screw Terminals'/>
568 <colspec align='center' colwidth='*' colname='Width'/>
569 <colspec align='center' colwidth='*' colname='Length'/>
570 <colspec align='center' colwidth='*' colname='Tube Size'/>
573 <entry align='center'>Device</entry>
574 <entry align='center'>Connectors</entry>
575 <entry align='center'>Screw Terminals</entry>
576 <entry align='center'>Width</entry>
577 <entry align='center'>Length</entry>
578 <entry align='center'>Tube Size</entry>
583 <entry>TeleMetrum</entry>
587 Companion<?linebreak?>
591 <entry><para>Apogee pyro <?linebreak?>Main pyro <?linebreak?>Switch</para></entry>
592 <entry>1 inch (2.54cm)</entry>
593 <entry>2 ¾ inch (6.99cm)</entry>
594 <entry>29mm coupler</entry>
597 <entry><para>TeleMini <?linebreak?>v1.0</para></entry>
604 Apogee pyro <?linebreak?>
607 <entry>½ inch (1.27cm)</entry>
608 <entry>1½ inch (3.81cm)</entry>
609 <entry>18mm coupler</entry>
612 <entry>TeleMini <?linebreak?>v2.0</entry>
620 Apogee pyro <?linebreak?>
621 Main pyro <?linebreak?>
622 Battery <?linebreak?>
625 <entry>0.8 inch (2.03cm)</entry>
626 <entry>1½ inch (3.81cm)</entry>
627 <entry>24mm coupler</entry>
630 <entry>EasyMini</entry>
637 Apogee pyro <?linebreak?>
638 Main pyro <?linebreak?>
639 Battery <?linebreak?>
642 <entry>0.8 inch (2.03cm)</entry>
643 <entry>1½ inch (3.81cm)</entry>
644 <entry>24mm coupler</entry>
647 <entry>TeleMega</entry>
651 Companion<?linebreak?>
656 Apogee pyro <?linebreak?>
657 Main pyro<?linebreak?>
658 Pyro A-D<?linebreak?>
662 <entry>1¼ inch (3.18cm)</entry>
663 <entry>3¼ inch (8.26cm)</entry>
664 <entry>38mm coupler</entry>
671 <title>TeleMetrum</title>
675 <imagedata fileref="telemetrum-v1.1-thside.jpg" width="5.5in" scalefit="1"/>
680 TeleMetrum is a 1 inch by 2¾ inch circuit board. It was designed to
681 fit inside coupler for 29mm air-frame tubing, but using it in a tube that
682 small in diameter may require some creativity in mounting and wiring
683 to succeed! The presence of an accelerometer means TeleMetrum should
684 be aligned along the flight axis of the airframe, and by default the ¼
685 wave UHF wire antenna should be on the nose-cone end of the board. The
686 antenna wire is about 7 inches long, and wiring for a power switch and
687 the e-matches for apogee and main ejection charges depart from the
688 fin can end of the board, meaning an ideal “simple” avionics
689 bay for TeleMetrum should have at least 10 inches of interior length.
692 <title>TeleMetrum Screw Terminals</title>
694 TeleMetrum has six screw terminals on the end of the board
695 opposite the telemetry antenna. Two are for the power
696 switch, and two each for the apogee and main igniter
697 circuits. Using the picture above and starting from the top,
698 the terminals are as follows:
701 <title>TeleMetrum Screw Terminals</title>
702 <?dbfo keep-together="always"?>
703 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
704 <colspec align='center' colwidth='*' colname='Pin #'/>
705 <colspec align='center' colwidth='2*' colname='Pin Name'/>
706 <colspec align='left' colwidth='5*' colname='Description'/>
709 <entry align='center'>Terminal #</entry>
710 <entry align='center'>Terminal Name</entry>
711 <entry align='center'>Description</entry>
717 <entry>Switch Output</entry>
718 <entry>Switch connection to flight computer</entry>
722 <entry>Switch Input</entry>
723 <entry>Switch connection to positive battery terminal</entry>
727 <entry>Main +</entry>
728 <entry>Main pyro channel common connection to battery +</entry>
732 <entry>Main -</entry>
733 <entry>Main pyro channel connection to pyro circuit</entry>
737 <entry>Apogee +</entry>
738 <entry>Apogee pyro channel common connection to battery +</entry>
742 <entry>Apogee -</entry>
743 <entry>Apogee pyro channel connection to pyro circuit</entry>
750 <title>Using a Separate Pyro Battery with TeleMetrum</title>
752 As described above, using an external pyro battery involves
753 connecting the negative battery terminal to the flight
754 computer ground, connecting the positive battery terminal to
755 one of the igniter leads and connecting the other igniter
756 lead to the per-channel pyro circuit connection.
759 To connect the negative battery terminal to the TeleMetrum
760 ground, insert a small piece of wire, 24 to 28 gauge
761 stranded, into the GND hole just above the screw terminal
762 strip and solder it in place.
765 Connecting the positive battery terminal to the pyro
766 charges must be done separate from TeleMetrum, by soldering
767 them together or using some other connector.
770 The other lead from each pyro charge is then inserted into
771 the appropriate per-pyro channel screw terminal (terminal 4 for the
772 Main charge, terminal 6 for the Apogee charge).
776 <title>Using an Active Switch with TeleMetrum</title>
778 As explained above, an external active switch requires three
779 connections, one to the positive battery terminal, one to
780 the flight computer positive input and one to ground.
783 The positive battery terminal is available on screw terminal
784 2, the positive flight computer input is on terminal 1. To
785 hook a lead to ground, solder a piece of wire, 24 to 28
786 gauge stranded, to the GND hole just above terminal 1.
791 <title>TeleMini v1.0</title>
795 <imagedata fileref="telemini-v1-top.jpg" width="5.5in" scalefit="1"/>
800 TeleMini v1.0 is ½ inches by 1½ inches. It was
801 designed to fit inside an 18mm air-frame tube, but using it in
802 a tube that small in diameter may require some creativity in
803 mounting and wiring to succeed! Since there is no
804 accelerometer, TeleMini can be mounted in any convenient
805 orientation. The default ¼ wave UHF wire antenna attached to
806 the center of one end of the board is about 7 inches long. Two
807 wires for the power switch are connected to holes in the
808 middle of the board. Screw terminals for the e-matches for
809 apogee and main ejection charges depart from the other end of
810 the board, meaning an ideal “simple” avionics bay for TeleMini
811 should have at least 9 inches of interior length.
814 <title>TeleMini v1.0 Screw Terminals</title>
816 TeleMini v1.0 has four screw terminals on the end of the
817 board opposite the telemetry antenna. Two are for the apogee
818 and two are for main igniter circuits. There are also wires
819 soldered to the board for the power switch. Using the
820 picture above and starting from the top for the terminals
821 and from the left for the power switch wires, the
822 connections are as follows:
825 <title>TeleMini v1.0 Connections</title>
826 <?dbfo keep-together="always"?>
827 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
828 <colspec align='center' colwidth='*' colname='Pin #'/>
829 <colspec align='center' colwidth='2*' colname='Pin Name'/>
830 <colspec align='left' colwidth='5*' colname='Description'/>
833 <entry align='center'>Terminal #</entry>
834 <entry align='center'>Terminal Name</entry>
835 <entry align='center'>Description</entry>
841 <entry>Apogee -</entry>
842 <entry>Apogee pyro channel connection to pyro circuit</entry>
846 <entry>Apogee +</entry>
847 <entry>Apogee pyro channel common connection to battery +</entry>
851 <entry>Main -</entry>
852 <entry>Main pyro channel connection to pyro circuit</entry>
856 <entry>Main +</entry>
857 <entry>Main pyro channel common connection to battery +</entry>
861 <entry>Switch Output</entry>
862 <entry>Switch connection to flight computer</entry>
866 <entry>Switch Input</entry>
867 <entry>Switch connection to positive battery terminal</entry>
874 <title>Using a Separate Pyro Battery with TeleMini v1.0</title>
876 As described above, using an external pyro battery involves
877 connecting the negative battery terminal to the flight
878 computer ground, connecting the positive battery terminal to
879 one of the igniter leads and connecting the other igniter
880 lead to the per-channel pyro circuit connection. Because
881 there is no solid ground connection to use on TeleMini, this
885 The only available ground connection on TeleMini v1.0 are
886 the two mounting holes next to the telemetry
887 antenna. Somehow connect a small piece of wire to one of
888 those holes and hook it to the negative pyro battery terminal.
891 Connecting the positive battery terminal to the pyro
892 charges must be done separate from TeleMini v1.0, by soldering
893 them together or using some other connector.
896 The other lead from each pyro charge is then inserted into
897 the appropriate per-pyro channel screw terminal (terminal 3 for the
898 Main charge, terminal 1 for the Apogee charge).
902 <title>Using an Active Switch with TeleMini v1.0</title>
904 As explained above, an external active switch requires three
905 connections, one to the positive battery terminal, one to
906 the flight computer positive input and one to ground. Again,
907 because TeleMini doesn't have any good ground connection,
908 this is not recommended.
911 The positive battery terminal is available on the Right
912 power switch wire, the positive flight computer input is on
913 the left power switch wire. Hook a lead to either of the
914 mounting holes for a ground connection.
919 <title>TeleMini v2.0</title>
923 <imagedata fileref="telemini-v2-top.jpg" width="5.5in" scalefit="1"/>
928 TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more
929 on-board data logging memory, a built-in USB connector and
930 screw terminals for the battery and power switch. The larger
931 board fits in a 24mm coupler. There's also a battery connector
932 for a LiPo battery if you want to use one of those.
935 <title>TeleMini v2.0 Screw Terminals</title>
937 TeleMini v2.0 has two sets of four screw terminals on the end of the
938 board opposite the telemetry antenna. Using the picture
939 above, the top four have connections for the main pyro
940 circuit and an external battery and the bottom four have
941 connections for the apogee pyro circuit and the power
942 switch. Counting from the left, the connections are as follows:
945 <title>TeleMini v2.0 Connections</title>
946 <?dbfo keep-together="always"?>
947 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
948 <colspec align='center' colwidth='*' colname='Pin #'/>
949 <colspec align='center' colwidth='2*' colname='Pin Name'/>
950 <colspec align='left' colwidth='5*' colname='Description'/>
953 <entry align='center'>Terminal #</entry>
954 <entry align='center'>Terminal Name</entry>
955 <entry align='center'>Description</entry>
961 <entry>Main -</entry>
962 <entry>Main pyro channel connection to pyro circuit</entry>
966 <entry>Main +</entry>
967 <entry>Main pyro channel common connection to battery +</entry>
971 <entry>Battery +</entry>
972 <entry>Positive external battery terminal</entry>
976 <entry>Battery -</entry>
977 <entry>Negative external battery terminal</entry>
980 <entry>Bottom 1</entry>
981 <entry>Apogee -</entry>
982 <entry>Apogee pyro channel connection to pyro circuit</entry>
985 <entry>Bottom 2</entry>
986 <entry>Apogee +</entry>
987 <entry>Apogee pyro channel common connection to
991 <entry>Bottom 3</entry>
992 <entry>Switch Output</entry>
993 <entry>Switch connection to flight computer</entry>
996 <entry>Bottom 4</entry>
997 <entry>Switch Input</entry>
998 <entry>Switch connection to positive battery terminal</entry>
1005 <title>Using a Separate Pyro Battery with TeleMini v2.0</title>
1007 As described above, using an external pyro battery involves
1008 connecting the negative battery terminal to the flight
1009 computer ground, connecting the positive battery terminal to
1010 one of the igniter leads and connecting the other igniter
1011 lead to the per-channel pyro circuit connection.
1014 To connect the negative pyro battery terminal to TeleMini
1015 ground, connect it to the negative external battery
1016 connection, top terminal 4.
1019 Connecting the positive battery terminal to the pyro
1020 charges must be done separate from TeleMini v2.0, by soldering
1021 them together or using some other connector.
1024 The other lead from each pyro charge is then inserted into
1025 the appropriate per-pyro channel screw terminal (top
1026 terminal 1 for the Main charge, bottom terminal 1 for the
1031 <title>Using an Active Switch with TeleMini v2.0</title>
1033 As explained above, an external active switch requires three
1034 connections, one to the positive battery terminal, one to
1035 the flight computer positive input and one to ground. Use
1036 the negative external battery connection, top terminal 4 for
1040 The positive battery terminal is available on bottom
1041 terminal 4, the positive flight computer input is on the
1047 <title>EasyMini</title>
1051 <imagedata fileref="easymini-top.jpg" width="5.5in" scalefit="1"/>
1056 EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
1057 designed to fit in a 24mm coupler tube. The connectors and
1058 screw terminals match TeleMini v2.0, so you can easily swap between
1059 EasyMini and TeleMini.
1062 <title>EasyMini Screw Terminals</title>
1064 EasyMini has two sets of four screw terminals on the end of the
1065 board opposite the telemetry antenna. Using the picture
1066 above, the top four have connections for the main pyro
1067 circuit and an external battery and the bottom four have
1068 connections for the apogee pyro circuit and the power
1069 switch. Counting from the left, the connections are as follows:
1072 <title>EasyMini Connections</title>
1073 <?dbfo keep-together="always"?>
1074 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
1075 <colspec align='center' colwidth='*' colname='Pin #'/>
1076 <colspec align='center' colwidth='2*' colname='Pin Name'/>
1077 <colspec align='left' colwidth='5*' colname='Description'/>
1080 <entry align='center'>Terminal #</entry>
1081 <entry align='center'>Terminal Name</entry>
1082 <entry align='center'>Description</entry>
1087 <entry>Top 1</entry>
1088 <entry>Main -</entry>
1089 <entry>Main pyro channel connection to pyro circuit</entry>
1092 <entry>Top 2</entry>
1093 <entry>Main +</entry>
1094 <entry>Main pyro channel common connection to battery +</entry>
1097 <entry>Top 3</entry>
1098 <entry>Battery +</entry>
1099 <entry>Positive external battery terminal</entry>
1102 <entry>Top 4</entry>
1103 <entry>Battery -</entry>
1104 <entry>Negative external battery terminal</entry>
1107 <entry>Bottom 1</entry>
1108 <entry>Apogee -</entry>
1109 <entry>Apogee pyro channel connection to pyro circuit</entry>
1112 <entry>Bottom 2</entry>
1113 <entry>Apogee +</entry>
1114 <entry>Apogee pyro channel common connection to
1118 <entry>Bottom 3</entry>
1119 <entry>Switch Output</entry>
1120 <entry>Switch connection to flight computer</entry>
1123 <entry>Bottom 4</entry>
1124 <entry>Switch Input</entry>
1125 <entry>Switch connection to positive battery terminal</entry>
1132 <title>Using a Separate Pyro Battery with EasyMini</title>
1134 As described above, using an external pyro battery involves
1135 connecting the negative battery terminal to the flight
1136 computer ground, connecting the positive battery terminal to
1137 one of the igniter leads and connecting the other igniter
1138 lead to the per-channel pyro circuit connection.
1141 To connect the negative pyro battery terminal to TeleMini
1142 ground, connect it to the negative external battery
1143 connection, top terminal 4.
1146 Connecting the positive battery terminal to the pyro
1147 charges must be done separate from EasyMini, by soldering
1148 them together or using some other connector.
1151 The other lead from each pyro charge is then inserted into
1152 the appropriate per-pyro channel screw terminal (top
1153 terminal 1 for the Main charge, bottom terminal 1 for the
1158 <title>Using an Active Switch with EasyMini</title>
1160 As explained above, an external active switch requires three
1161 connections, one to the positive battery terminal, one to
1162 the flight computer positive input and one to ground. Use
1163 the negative external battery connection, top terminal 4 for
1167 The positive battery terminal is available on bottom
1168 terminal 4, the positive flight computer input is on the
1174 <title>TeleMega</title>
1178 <imagedata fileref="telemega-v1.0-top.jpg" width="5.5in" scalefit="1"/>
1183 TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
1184 designed to easily fit in a 38mm coupler. Like TeleMetrum,
1185 TeleMega has an accelerometer and so it must be mounted so that
1186 the board is aligned with the flight axis. It can be mounted
1187 either antenna up or down.
1190 <title>TeleMega Screw Terminals</title>
1192 TeleMega has two sets of nine screw terminals on the end of
1193 the board opposite the telemetry antenna. They are as follows:
1196 <title>TeleMega Screw Terminals</title>
1197 <?dbfo keep-together="always"?>
1198 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
1199 <colspec align='center' colwidth='*' colname='Pin #'/>
1200 <colspec align='center' colwidth='2*' colname='Pin Name'/>
1201 <colspec align='left' colwidth='5*' colname='Description'/>
1204 <entry align='center'>Terminal #</entry>
1205 <entry align='center'>Terminal Name</entry>
1206 <entry align='center'>Description</entry>
1211 <entry>Top 1</entry>
1212 <entry>Switch Input</entry>
1213 <entry>Switch connection to positive battery terminal</entry>
1216 <entry>Top 2</entry>
1217 <entry>Switch Output</entry>
1218 <entry>Switch connection to flight computer</entry>
1221 <entry>Top 3</entry>
1223 <entry>Ground connection for use with external active switch</entry>
1226 <entry>Top 4</entry>
1227 <entry>Main -</entry>
1228 <entry>Main pyro channel connection to pyro circuit</entry>
1231 <entry>Top 5</entry>
1232 <entry>Main +</entry>
1233 <entry>Main pyro channel common connection to battery +</entry>
1236 <entry>Top 6</entry>
1237 <entry>Apogee -</entry>
1238 <entry>Apogee pyro channel connection to pyro circuit</entry>
1241 <entry>Top 7</entry>
1242 <entry>Apogee +</entry>
1243 <entry>Apogee pyro channel common connection to battery +</entry>
1246 <entry>Top 8</entry>
1248 <entry>D pyro channel connection to pyro circuit</entry>
1251 <entry>Top 9</entry>
1253 <entry>D pyro channel common connection to battery +</entry>
1256 <entry>Bottom 1</entry>
1258 <entry>Ground connection for negative pyro battery terminal</entry>
1261 <entry>Bottom 2</entry>
1263 <entry>Positive pyro battery terminal</entry>
1266 <entry>Bottom 3</entry>
1269 Power switch output. Use to connect main battery to
1274 <entry>Bottom 4</entry>
1276 <entry>A pyro channel connection to pyro circuit</entry>
1279 <entry>Bottom 5</entry>
1281 <entry>A pyro channel common connection to battery +</entry>
1284 <entry>Bottom 6</entry>
1286 <entry>B pyro channel connection to pyro circuit</entry>
1289 <entry>Bottom 7</entry>
1291 <entry>B pyro channel common connection to battery +</entry>
1294 <entry>Bottom 8</entry>
1296 <entry>C pyro channel connection to pyro circuit</entry>
1299 <entry>Bottom 9</entry>
1301 <entry>C pyro channel common connection to battery +</entry>
1308 <title>Using a Separate Pyro Battery with TeleMega</title>
1310 TeleMega provides explicit support for an external pyro
1311 battery. All that is required is to remove the jumper
1312 between the lipo terminal (Bottom 3) and the pyro terminal
1313 (Bottom 2). Then hook the negative pyro battery terminal to ground
1314 (Bottom 1) and the positive pyro battery to the pyro battery
1315 input (Bottom 2). You can then use the existing pyro screw
1316 terminals to hook up all of the pyro charges.
1320 <title>Using an Active Switch with TeleMega</title>
1322 As explained above, an external active switch requires three
1323 connections, one to the positive battery terminal, one to
1324 the flight computer positive input and one to ground.
1327 The positive battery terminal is available on Top terminal
1328 1, the positive flight computer input is on Top terminal
1329 2. Ground is on Top terminal 3.
1334 <title>Flight Data Recording</title>
1336 Each flight computer logs data at 100 samples per second
1337 during ascent and 10 samples per second during descent, except
1338 for TeleMini v1.0, which records ascent at 10 samples per
1339 second and descent at 1 sample per second. Data are logged to
1340 an on-board flash memory part, which can be partitioned into
1341 several equal-sized blocks, one for each flight.
1344 <title>Data Storage on Altus Metrum altimeters</title>
1345 <?dbfo keep-together="always"?>
1346 <tgroup cols='4' align='center' colsep='1' rowsep='1'>
1347 <colspec align='center' colwidth='*' colname='Device'/>
1348 <colspec align='center' colwidth='*' colname='Bytes per sample'/>
1349 <colspec align='center' colwidth='*' colname='Total storage'/>
1350 <colspec align='center' colwidth='*' colname='Minutes of
1354 <entry align='center'>Device</entry>
1355 <entry align='center'>Bytes per Sample</entry>
1356 <entry align='center'>Total Storage</entry>
1357 <entry align='center'>Minutes at Full Rate</entry>
1362 <entry>TeleMetrum v1.0</entry>
1368 <entry>TeleMetrum v1.1 v1.2</entry>
1374 <entry>TeleMetrum v2.0</entry>
1380 <entry>TeleMini v1.0</entry>
1386 <entry>TeleMini v2.0</entry>
1392 <entry>EasyMini</entry>
1398 <entry>TeleMega</entry>
1407 The on-board flash is partitioned into separate flight logs,
1408 each of a fixed maximum size. Increase the maximum size of
1409 each log and you reduce the number of flights that can be
1410 stored. Decrease the size and you can store more flights.
1413 Configuration data is also stored in the flash memory on
1414 TeleMetrum v1.x, TeleMini and EasyMini. This consumes 64kB
1415 of flash space. This configuration space is not available
1416 for storing flight log data. TeleMetrum v2.0 and TeleMega
1417 store configuration data in a bit of eeprom available within
1418 the processor chip, leaving that space available in flash for
1422 To compute the amount of space needed for a single flight, you
1423 can multiply the expected ascent time (in seconds) by 100
1424 times bytes-per-sample, multiply the expected descent time (in
1425 seconds) by 10 times the bytes per sample and add the two
1426 together. That will slightly under-estimate the storage (in
1427 bytes) needed for the flight. For instance, a TeleMetrum v2.0 flight spending
1428 20 seconds in ascent and 150 seconds in descent will take
1429 about (20 * 1600) + (150 * 160) = 56000 bytes of storage. You
1430 could store dozens of these flights in the on-board flash.
1433 The default size allows for several flights on each flight
1434 computer, except for TeleMini v1.0, which only holds data for a
1435 single flight. You can adjust the size.
1438 Altus Metrum flight computers will not overwrite existing
1439 flight data, so be sure to download flight data and erase it
1440 from the flight computer before it fills up. The flight
1441 computer will still successfully control the flight even if it
1442 cannot log data, so the only thing you will lose is the data.
1446 <title>Installation</title>
1448 A typical installation involves attaching
1449 only a suitable battery, a single pole switch for
1450 power on/off, and two pairs of wires connecting e-matches for the
1451 apogee and main ejection charges. All Altus Metrum products are
1452 designed for use with single-cell batteries with 3.7 volts
1453 nominal. TeleMini v2.0 and EasyMini may also be used with other
1454 batteries as long as they supply between 4 and 12 volts.
1457 The battery connectors are a standard 2-pin JST connector and
1458 match batteries sold by Spark Fun. These batteries are
1459 single-cell Lithium Polymer batteries that nominally provide 3.7
1460 volts. Other vendors sell similar batteries for RC aircraft
1461 using mating connectors, however the polarity for those is
1462 generally reversed from the batteries used by Altus Metrum
1463 products. In particular, the Tenergy batteries supplied for use
1464 in Featherweight flight computers are not compatible with Altus
1465 Metrum flight computers or battery chargers. <emphasis>Check
1466 polarity and voltage before connecting any battery not purchased
1467 from Altus Metrum or Spark Fun.</emphasis>
1470 By default, we use the unregulated output of the battery directly
1471 to fire ejection charges. This works marvelously with standard
1472 low-current e-matches like the J-Tek from MJG Technologies, and with
1473 Quest Q2G2 igniters. However, if you want or need to use a separate
1474 pyro battery, check out the “External Pyro Battery” section in this
1475 manual for instructions on how to wire that up. The altimeters are
1476 designed to work with an external pyro battery of no more than 15 volts.
1479 Ejection charges are wired directly to the screw terminal block
1480 at the aft end of the altimeter. You'll need a very small straight
1481 blade screwdriver for these screws, such as you might find in a
1482 jeweler's screwdriver set.
1485 Except for TeleMini v1.0, the flight computers also use the
1486 screw terminal block for the power switch leads. On TeleMini v1.0,
1487 the power switch leads are soldered directly to the board and
1488 can be connected directly to a switch.
1491 For most air-frames, the integrated antennas are more than
1492 adequate. However, if you are installing in a carbon-fiber or
1493 metal electronics bay which is opaque to RF signals, you may need to
1494 use off-board external antennas instead. In this case, you can
1495 replace the stock UHF antenna wire with an edge-launched SMA connector,
1496 and, on TeleMetrum v1, you can unplug the integrated GPS
1497 antenna and select an appropriate off-board GPS antenna with
1498 cable terminating in a U.FL connector.
1503 <title>System Operation</title>
1505 <title>Firmware Modes </title>
1507 The AltOS firmware build for the altimeters has two
1508 fundamental modes, “idle” and “flight”. Which of these modes
1509 the firmware operates in is determined at start up time. For
1510 TeleMetrum and TeleMega, which have accelerometers, the mode is
1511 controlled by the orientation of the
1512 rocket (well, actually the board, of course...) at the time
1513 power is switched on. If the rocket is “nose up”, then
1514 the flight computer assumes it's on a rail or rod being prepared for
1515 launch, so the firmware chooses flight mode. However, if the
1516 rocket is more or less horizontal, the firmware instead enters
1517 idle mode. Since TeleMini v2.0 and EasyMini don't have an
1518 accelerometer we can use to determine orientation, “idle” mode
1519 is selected if the board is connected via USB to a computer,
1520 otherwise the board enters “flight” mode. TeleMini v1.0
1521 selects “idle” mode if it receives a command packet within the
1522 first five seconds of operation.
1525 At power on, you will hear three beeps or see three flashes
1526 (“S” in Morse code for start up) and then a pause while
1527 the altimeter completes initialization and self test, and decides
1528 which mode to enter next.
1531 Here's a short summary of all of the modes and the beeping (or
1532 flashing, in the case of TeleMini v1) that accompanies each
1533 mode. In the description of the beeping pattern, “dit” means a
1534 short beep while "dah" means a long beep (three times as
1535 long). “Brap” means a long dissonant tone.
1537 <title>AltOS Modes</title>
1538 <?dbfo keep-together="always"?>
1539 <tgroup cols='4' align='center' colsep='1' rowsep='1'>
1540 <colspec align='center' colwidth='*' colname='Mode Name'/>
1541 <colspec align='center' colwidth='*' colname='Letter'/>
1542 <colspec align='center' colwidth='*' colname='Beeps'/>
1543 <colspec align='center' colwidth='*' colname='Description'/>
1546 <entry>Mode Name</entry>
1547 <entry>Abbreviation</entry>
1548 <entry>Beeps</entry>
1549 <entry>Description</entry>
1554 <entry>Startup</entry>
1556 <entry>dit dit dit</entry>
1559 Calibrating sensors, detecting orientation.
1566 <entry>dit dit</entry>
1569 Ready to accept commands over USB or radio link.
1576 <entry>dit dah dah dit</entry>
1579 Waiting for launch. Not listening for commands.
1584 <entry>Boost</entry>
1586 <entry>dah dit dit dit</entry>
1589 Accelerating upwards.
1596 <entry>dit dit dah dit</entry>
1599 Decelerating, but moving faster than 200m/s.
1604 <entry>Coast</entry>
1606 <entry>dah dit dah dit</entry>
1609 Decelerating, moving slower than 200m/s
1614 <entry>Drogue</entry>
1616 <entry>dah dit dit</entry>
1619 Descending after apogee. Above main height.
1626 <entry>dah dah</entry>
1629 Descending. Below main height.
1634 <entry>Landed</entry>
1636 <entry>dit dah dit dit</entry>
1639 Stable altitude for at least ten seconds.
1644 <entry>Sensor error</entry>
1646 <entry>dah dit dit dah</entry>
1649 Error detected during sensor calibration.
1658 In flight or “pad” mode, the altimeter engages the flight
1659 state machine, goes into transmit-only mode to send telemetry,
1660 and waits for launch to be detected. Flight mode is indicated
1661 by an “di-dah-dah-dit” (“P” for pad) on the beeper or lights,
1662 followed by beeps or flashes indicating the state of the
1663 pyrotechnic igniter continuity. One beep/flash indicates
1664 apogee continuity, two beeps/flashes indicate main continuity,
1665 three beeps/flashes indicate both apogee and main continuity,
1666 and one longer “brap” sound which is made by rapidly
1667 alternating between two tones indicates no continuity. For a
1668 dual deploy flight, make sure you're getting three beeps or
1669 flashes before launching! For apogee-only or motor eject
1670 flights, do what makes sense.
1673 If idle mode is entered, you will hear an audible “di-dit” or
1674 see two short flashes (“I” for idle), and the flight state
1675 machine is disengaged, thus no ejection charges will fire.
1676 The altimeters also listen for the radio link when in idle
1677 mode for requests sent via TeleDongle. Commands can be issued
1678 in idle mode over either USB or the radio link
1679 equivalently. TeleMini v1.0 only has the radio link. Idle
1680 mode is useful for configuring the altimeter, for extracting
1681 data from the on-board storage chip after flight, and for
1682 ground testing pyro charges.
1685 In “Idle” and “Pad” modes, once the mode indication
1686 beeps/flashes and continuity indication has been sent, if
1687 there is no space available to log the flight in on-board
1688 memory, the flight computer will emit a warbling tone (much
1689 slower than the “no continuity tone”)
1692 Here's a summary of all of the “pad” and “idle” mode indications.
1694 <title>Pad/Idle Indications</title>
1695 <?dbfo keep-together="always"?>
1696 <tgroup cols='3' align='center' colsep='1' rowsep='1'>
1697 <colspec align='center' colwidth='*' colname='Name'/>
1698 <colspec align='center' colwidth='*' colname='Beeps'/>
1699 <colspec align='center' colwidth='*' colname='Description'/>
1703 <entry>Beeps</entry>
1704 <entry>Description</entry>
1709 <entry>Neither</entry>
1713 No continuity detected on either apogee or main
1719 <entry>Apogee</entry>
1723 Continuity detected only on apogee igniter.
1729 <entry>dit dit</entry>
1732 Continuity detected only on main igniter.
1738 <entry>dit dit dit</entry>
1741 Continuity detected on both igniters.
1746 <entry>Storage Full</entry>
1747 <entry>warble</entry>
1750 On-board data logging storage is full. This will
1751 not prevent the flight computer from safely
1752 controlling the flight or transmitting telemetry
1753 signals, but no record of the flight will be
1754 stored in on-board flash.
1763 Once landed, the flight computer will signal that by emitting
1764 the “Landed” sound described above, after which it will beep
1765 out the apogee height (in meters). Each digit is represented
1766 by a sequence of short “dit” beeps, with a pause between
1767 digits. A zero digit is represented with one long “dah”
1768 beep. The flight computer will continue to report landed mode
1769 and beep out the maximum height until turned off.
1772 One “neat trick” of particular value when TeleMetrum or TeleMega are used with
1773 very large air-frames, is that you can power the board up while the
1774 rocket is horizontal, such that it comes up in idle mode. Then you can
1775 raise the air-frame to launch position, and issue a 'reset' command
1776 via TeleDongle over the radio link to cause the altimeter to reboot and
1777 come up in flight mode. This is much safer than standing on the top
1778 step of a rickety step-ladder or hanging off the side of a launch
1779 tower with a screw-driver trying to turn on your avionics before
1780 installing igniters!
1783 TeleMini v1.0 is configured solely via the radio link. Of course, that
1784 means you need to know the TeleMini radio configuration values
1785 or you won't be able to communicate with it. For situations
1786 when you don't have the radio configuration values, TeleMini v1.0
1787 offers an 'emergency recovery' mode. In this mode, TeleMini is
1788 configured as follows:
1792 Sets the radio frequency to 434.550MHz
1797 Sets the radio calibration back to the factory value.
1802 Sets the callsign to N0CALL
1807 Does not go to 'pad' mode after five seconds.
1813 To get into 'emergency recovery' mode, first find the row of
1814 four small holes opposite the switch wiring. Using a short
1815 piece of small gauge wire, connect the outer two holes
1816 together, then power TeleMini up. Once the red LED is lit,
1817 disconnect the wire and the board should signal that it's in
1818 'idle' mode after the initial five second startup period.
1824 TeleMetrum and TeleMega include a complete GPS receiver. A
1825 complete explanation of how GPS works is beyond the scope of
1826 this manual, but the bottom line is that the GPS receiver
1827 needs to lock onto at least four satellites to obtain a solid
1828 3 dimensional position fix and know what time it is.
1831 The flight computers provide backup power to the GPS chip any time a
1832 battery is connected. This allows the receiver to “warm start” on
1833 the launch rail much faster than if every power-on were a GPS
1834 “cold start”. In typical operations, powering up
1835 on the flight line in idle mode while performing final air-frame
1836 preparation will be sufficient to allow the GPS receiver to cold
1837 start and acquire lock. Then the board can be powered down during
1838 RSO review and installation on a launch rod or rail. When the board
1839 is turned back on, the GPS system should lock very quickly, typically
1840 long before igniter installation and return to the flight line are
1845 <title>Controlling An Altimeter Over The Radio Link</title>
1847 One of the unique features of the Altus Metrum system is the
1848 ability to create a two way command link between TeleDongle
1849 and an altimeter using the digital radio transceivers
1850 built into each device. This allows you to interact with the
1851 altimeter from afar, as if it were directly connected to the
1855 Any operation which can be performed with a flight computer can
1856 either be done with the device directly connected to the
1857 computer via the USB cable, or through the radio
1858 link. TeleMini v1.0 doesn't provide a USB connector and so it is
1859 always communicated with over radio. Select the appropriate
1860 TeleDongle device when the list of devices is presented and
1861 AltosUI will interact with an altimeter over the radio link.
1864 One oddity in the current interface is how AltosUI selects the
1865 frequency for radio communications. Instead of providing
1866 an interface to specifically configure the frequency, it uses
1867 whatever frequency was most recently selected for the target
1868 TeleDongle device in Monitor Flight mode. If you haven't ever
1869 used that mode with the TeleDongle in question, select the
1870 Monitor Flight button from the top level UI, and pick the
1871 appropriate TeleDongle device. Once the flight monitoring
1872 window is open, select the desired frequency and then close it
1873 down again. All radio communications will now use that frequency.
1878 Save Flight Data—Recover flight data from the rocket without
1884 Configure altimeter apogee delays, main deploy heights
1885 and additional pyro event conditions
1886 to respond to changing launch conditions. You can also
1887 'reboot' the altimeter. Use this to remotely enable the
1888 flight computer by turning TeleMetrum or TeleMega on in “idle” mode,
1889 then once the air-frame is oriented for launch, you can
1890 reboot the altimeter and have it restart in pad mode
1891 without having to climb the scary ladder.
1896 Fire Igniters—Test your deployment charges without snaking
1897 wires out through holes in the air-frame. Simply assemble the
1898 rocket as if for flight with the apogee and main charges
1899 loaded, then remotely command the altimeter to fire the
1905 Operation over the radio link for configuring an altimeter, ground
1906 testing igniters, and so forth uses the same RF frequencies as flight
1907 telemetry. To configure the desired TeleDongle frequency, select
1908 the monitor flight tab, then use the frequency selector and
1909 close the window before performing other desired radio operations.
1912 The flight computers only enable radio commanding in 'idle' mode.
1913 TeleMetrum and TeleMega use the accelerometer to detect which orientation they
1914 start up in, so make sure you have the flight computer lying horizontally when you turn
1915 it on. Otherwise, it will start in 'pad' mode ready for
1916 flight, and will not be listening for command packets from TeleDongle.
1919 TeleMini listens for a command packet for five seconds after
1920 first being turned on, if it doesn't hear anything, it enters
1921 'pad' mode, ready for flight and will no longer listen for
1922 command packets. The easiest way to connect to TeleMini is to
1923 initiate the command and select the TeleDongle device. At this
1924 point, the TeleDongle will be attempting to communicate with
1925 the TeleMini. Now turn TeleMini on, and it should immediately
1926 start communicating with the TeleDongle and the desired
1927 operation can be performed.
1930 You can monitor the operation of the radio link by watching the
1931 lights on the devices. The red LED will flash each time a packet
1932 is transmitted, while the green LED will light up on TeleDongle when
1933 it is waiting to receive a packet from the altimeter.
1937 <title>Ground Testing </title>
1939 An important aspect of preparing a rocket using electronic deployment
1940 for flight is ground testing the recovery system. Thanks
1941 to the bi-directional radio link central to the Altus Metrum system,
1942 this can be accomplished in a TeleMega, TeleMetrum or TeleMini equipped rocket
1943 with less work than you may be accustomed to with other systems. It
1947 Just prep the rocket for flight, then power up the altimeter
1948 in “idle” mode (placing air-frame horizontal for TeleMetrum or TeleMega, or
1949 selecting the Configure Altimeter tab for TeleMini). This will cause
1950 the firmware to go into “idle” mode, in which the normal flight
1951 state machine is disabled and charges will not fire without
1952 manual command. You can now command the altimeter to fire the apogee
1953 or main charges from a safe distance using your computer and
1954 TeleDongle and the Fire Igniter tab to complete ejection testing.
1958 <title>Radio Link </title>
1960 Our flight computers all incorporate an RF transceiver, but
1961 it's not a full duplex system... each end can only be transmitting or
1962 receiving at any given moment. So we had to decide how to manage the
1966 By design, the altimeter firmware listens for the radio link when
1967 it's in “idle mode”, which
1968 allows us to use the radio link to configure the rocket, do things like
1969 ejection tests, and extract data after a flight without having to
1970 crack open the air-frame. However, when the board is in “flight
1971 mode”, the altimeter only
1972 transmits and doesn't listen at all. That's because we want to put
1973 ultimate priority on event detection and getting telemetry out of
1975 the radio in case the rocket crashes and we aren't able to extract
1979 We don't generally use a 'normal packet radio' mode like APRS
1980 because they're just too inefficient. The GFSK modulation we
1981 use is FSK with the base-band pulses passed through a Gaussian
1982 filter before they go into the modulator to limit the
1983 transmitted bandwidth. When combined with forward error
1984 correction and interleaving, this allows us to have a very
1985 robust 19.2 kilobit data link with only 10-40 milliwatts of
1986 transmit power, a whip antenna in the rocket, and a hand-held
1987 Yagi on the ground. We've had flights to above 21k feet AGL
1988 with great reception, and calculations suggest we should be
1989 good to well over 40k feet AGL with a 5-element yagi on the
1990 ground with our 10mW units and over 100k feet AGL with the
1991 40mW devices. We hope to fly boards to higher altitudes over
1992 time, and would of course appreciate customer feedback on
1993 performance in higher altitude flights!
1996 TeleMetrum v2.0 and TeleMega can send APRS if desired, and the
1997 interval between APRS packets can be configured. As each APRS
1998 packet takes a full second to transmit, we recommend an
1999 interval of at least 5 seconds to avoid consuming too much
2000 battery power or radio channel bandwidth.
2004 <title>Configurable Parameters</title>
2006 Configuring an Altus Metrum altimeter for flight is very
2007 simple. Even on our baro-only TeleMini and EasyMini boards, the use of a Kalman
2008 filter means there is no need to set a “mach delay”. The few
2009 configurable parameters can all be set using AltosUI over USB or
2010 or radio link via TeleDongle.
2013 <title>Radio Frequency</title>
2015 Altus Metrum boards support radio frequencies in the 70cm
2016 band. By default, the configuration interface provides a
2017 list of 10 “standard” frequencies in 100kHz channels starting at
2018 434.550MHz. However, the firmware supports use of
2019 any 50kHz multiple within the 70cm band. At any given
2020 launch, we highly recommend coordinating when and by whom each
2021 frequency will be used to avoid interference. And of course, both
2022 altimeter and TeleDongle must be configured to the same
2023 frequency to successfully communicate with each other.
2027 <title>Apogee Delay</title>
2029 Apogee delay is the number of seconds after the altimeter detects flight
2030 apogee that the drogue charge should be fired. In most cases, this
2031 should be left at the default of 0. However, if you are flying
2032 redundant electronics such as for an L3 certification, you may wish
2033 to set one of your altimeters to a positive delay so that both
2034 primary and backup pyrotechnic charges do not fire simultaneously.
2037 The Altus Metrum apogee detection algorithm fires exactly at
2038 apogee. If you are also flying an altimeter like the
2039 PerfectFlite MAWD, which only supports selecting 0 or 1
2040 seconds of apogee delay, you may wish to set the MAWD to 0
2041 seconds delay and set the TeleMetrum to fire your backup 2
2042 or 3 seconds later to avoid any chance of both charges
2043 firing simultaneously. We've flown several air-frames this
2044 way quite happily, including Keith's successful L3 cert.
2048 <title>Main Deployment Altitude</title>
2050 By default, the altimeter will fire the main deployment charge at an
2051 elevation of 250 meters (about 820 feet) above ground. We think this
2052 is a good elevation for most air-frames, but feel free to change this
2053 to suit. In particular, if you are flying two altimeters, you may
2055 deployment elevation for the backup altimeter to be something lower
2056 than the primary so that both pyrotechnic charges don't fire
2061 <title>Maximum Flight Log</title>
2063 Changing this value will set the maximum amount of flight
2064 log storage that an individual flight will use. The
2065 available storage is divided into as many flights of the
2066 specified size as can fit in the available space. You can
2067 download and erase individual flight logs. If you fill up
2068 the available storage, future flights will not get logged
2069 until you erase some of the stored ones.
2072 Even though our flight computers (except TeleMini v1.0) can store
2073 multiple flights, we strongly recommend downloading and saving
2074 flight data after each flight.
2078 <title>Ignite Mode</title>
2080 Instead of firing one charge at apogee and another charge at
2081 a fixed height above the ground, you can configure the
2082 altimeter to fire both at apogee or both during
2083 descent. This was added to support an airframe Bdale designed that
2084 had two altimeters, one in the fin can and one in the nose.
2087 Providing the ability to use both igniters for apogee or
2088 main allows some level of redundancy without needing two
2089 flight computers. In Redundant Apogee or Redundant Main
2090 mode, the two charges will be fired two seconds apart.
2094 <title>Pad Orientation</title>
2096 TeleMetrum and TeleMega measure acceleration along the axis
2097 of the board. Which way the board is oriented affects the
2098 sign of the acceleration value. Instead of trying to guess
2099 which way the board is mounted in the air frame, the
2100 altimeter must be explicitly configured for either Antenna
2101 Up or Antenna Down. The default, Antenna Up, expects the end
2102 of the board connected to the 70cm antenna to be nearest the
2103 nose of the rocket, with the end containing the screw
2104 terminals nearest the tail.
2108 <title>Configurable Pyro Channels</title>
2110 In addition to the usual Apogee and Main pyro channels,
2111 TeleMega has four additional channels that can be configured
2112 to activate when various flight conditions are
2113 satisfied. You can select as many conditions as necessary;
2114 all of them must be met in order to activate the
2115 channel. The conditions available are:
2120 Acceleration away from the ground. Select a value, and
2121 then choose whether acceleration should be above or
2122 below that value. Acceleration is positive upwards, so
2123 accelerating towards the ground would produce negative
2124 numbers. Acceleration during descent is noisy and
2125 inaccurate, so be careful when using it during these
2126 phases of the flight.
2131 Vertical speed. Select a value, and then choose whether
2132 vertical speed should be above or below that
2133 value. Speed is positive upwards, so moving towards the
2134 ground would produce negative numbers. Speed during
2135 descent is a bit noisy and so be careful when using it
2136 during these phases of the flight.
2141 Height. Select a value, and then choose whether the
2142 height above the launch pad should be above or below
2148 Orientation. TeleMega contains a 3-axis gyroscope and
2149 accelerometer which is used to measure the current
2150 angle. Note that this angle is not the change in angle
2151 from the launch pad, but rather absolute relative to
2152 gravity; the 3-axis accelerometer is used to compute the
2153 angle of the rocket on the launch pad and initialize the
2154 system. Because this value is computed by integrating
2155 rate gyros, it gets progressively less accurate as the
2156 flight goes on. It should have an accumulated error of
2157 less than 0.2°/second (after 10 seconds of flight, the
2158 error should be less than 2°).
2161 The usual use of the orientation configuration is to
2162 ensure that the rocket is traveling mostly upwards when
2163 deciding whether to ignite air starts or additional
2164 stages. For that, choose a reasonable maximum angle
2165 (like 20°) and set the motor igniter to require an angle
2166 of less than that value.
2171 Flight Time. Time since boost was detected. Select a
2172 value and choose whether to activate the pyro channel
2173 before or after that amount of time.
2178 Ascending. A simple test saying whether the rocket is
2179 going up or not. This is exactly equivalent to testing
2180 whether the speed is > 0.
2185 Descending. A simple test saying whether the rocket is
2186 going down or not. This is exactly equivalent to testing
2187 whether the speed is < 0.
2192 After Motor. The flight software counts each time the
2193 rocket starts accelerating (presumably due to a motor or
2194 motors igniting). Use this value to count ignitions for
2195 multi-staged or multi-airstart launches.
2200 Delay. This value doesn't perform any checks, instead it
2201 inserts a delay between the time when the other
2202 parameters become true and when the pyro channel is
2208 Flight State. The flight software tracks the flight
2209 through a sequence of states:
2213 Boost. The motor has lit and the rocket is
2214 accelerating upwards.
2219 Fast. The motor has burned out and the rocket is
2220 decelerating, but it is going faster than 200m/s.
2225 Coast. The rocket is still moving upwards and
2226 decelerating, but the speed is less than 200m/s.
2231 Drogue. The rocket has reached apogee and is heading
2232 back down, but is above the configured Main
2238 Main. The rocket is still descending, and is below
2244 Landed. The rocket is no longer moving.
2250 You can select a state to limit when the pyro channel
2251 may activate; note that the check is based on when the
2252 rocket transitions <emphasis>into</emphasis> the state, and so checking for
2253 “greater than Boost” means that the rocket is currently
2254 in boost or some later state.
2257 When a motor burns out, the rocket enters either Fast or
2258 Coast state (depending on how fast it is moving). If the
2259 computer detects upwards acceleration again, it will
2260 move back to Boost state.
2269 <title>AltosUI</title>
2273 <imagedata fileref="altosui.png" width="4.6in"/>
2278 The AltosUI program provides a graphical user interface for
2279 interacting with the Altus Metrum product family. AltosUI can
2280 monitor telemetry data, configure devices and many other
2281 tasks. The primary interface window provides a selection of
2282 buttons, one for each major activity in the system. This chapter
2283 is split into sections, each of which documents one of the tasks
2284 provided from the top-level toolbar.
2287 <title>Monitor Flight</title>
2288 <subtitle>Receive, Record and Display Telemetry Data</subtitle>
2290 Selecting this item brings up a dialog box listing all of the
2291 connected TeleDongle devices. When you choose one of these,
2292 AltosUI will create a window to display telemetry data as
2293 received by the selected TeleDongle device.
2298 <imagedata fileref="device-selection.png" width="3.1in"/>
2303 All telemetry data received are automatically recorded in
2304 suitable log files. The name of the files includes the current
2305 date and rocket serial and flight numbers.
2308 The radio frequency being monitored by the TeleDongle device is
2309 displayed at the top of the window. You can configure the
2310 frequency by clicking on the frequency box and selecting the desired
2311 frequency. AltosUI remembers the last frequency selected for each
2312 TeleDongle and selects that automatically the next time you use
2316 Below the TeleDongle frequency selector, the window contains a few
2317 significant pieces of information about the altimeter providing
2318 the telemetry data stream:
2322 <para>The configured call-sign</para>
2325 <para>The device serial number</para>
2328 <para>The flight number. Each altimeter remembers how many
2334 The rocket flight state. Each flight passes through several
2335 states including Pad, Boost, Fast, Coast, Drogue, Main and
2341 The Received Signal Strength Indicator value. This lets
2342 you know how strong a signal TeleDongle is receiving. The
2343 radio inside TeleDongle operates down to about -99dBm;
2344 weaker signals may not be receivable. The packet link uses
2345 error detection and correction techniques which prevent
2346 incorrect data from being reported.
2351 The age of the displayed data, in seconds since the last
2352 successfully received telemetry packet. In normal operation
2353 this will stay in the low single digits. If the number starts
2354 counting up, then you are no longer receiving data over the radio
2355 link from the flight computer.
2360 Finally, the largest portion of the window contains a set of
2361 tabs, each of which contain some information about the rocket.
2362 They're arranged in 'flight order' so that as the flight
2363 progresses, the selected tab automatically switches to display
2364 data relevant to the current state of the flight. You can select
2365 other tabs at any time. The final 'table' tab displays all of
2366 the raw telemetry values in one place in a spreadsheet-like format.
2369 <title>Launch Pad</title>
2373 <imagedata fileref="launch-pad.png" width="5.5in"/>
2378 The 'Launch Pad' tab shows information used to decide when the
2379 rocket is ready for flight. The first elements include red/green
2380 indicators, if any of these is red, you'll want to evaluate
2381 whether the rocket is ready to launch:
2384 <term>Battery Voltage</term>
2387 This indicates whether the Li-Po battery powering the
2388 flight computer has sufficient charge to last for
2389 the duration of the flight. A value of more than
2390 3.8V is required for a 'GO' status.
2395 <term>Apogee Igniter Voltage</term>
2398 This indicates whether the apogee
2399 igniter has continuity. If the igniter has a low
2400 resistance, then the voltage measured here will be close
2401 to the Li-Po battery voltage. A value greater than 3.2V is
2402 required for a 'GO' status.
2407 <term>Main Igniter Voltage</term>
2410 This indicates whether the main
2411 igniter has continuity. If the igniter has a low
2412 resistance, then the voltage measured here will be close
2413 to the Li-Po battery voltage. A value greater than 3.2V is
2414 required for a 'GO' status.
2419 <term>On-board Data Logging</term>
2422 This indicates whether there is
2423 space remaining on-board to store flight data for the
2424 upcoming flight. If you've downloaded data, but failed
2425 to erase flights, there may not be any space
2426 left. Most of our flight computers can store multiple
2427 flights, depending on the configured maximum flight log
2428 size. TeleMini v1.0 stores only a single flight, so it
2430 downloaded and erased after each flight to capture
2431 data. This only affects on-board flight logging; the
2432 altimeter will still transmit telemetry and fire
2433 ejection charges at the proper times even if the flight
2434 data storage is full.
2439 <term>GPS Locked</term>
2442 For a TeleMetrum or TeleMega device, this indicates whether the GPS receiver is
2443 currently able to compute position information. GPS requires
2444 at least 4 satellites to compute an accurate position.
2449 <term>GPS Ready</term>
2452 For a TeleMetrum or TeleMega device, this indicates whether GPS has reported at least
2453 10 consecutive positions without losing lock. This ensures
2454 that the GPS receiver has reliable reception from the
2462 The Launchpad tab also shows the computed launch pad position
2463 and altitude, averaging many reported positions to improve the
2464 accuracy of the fix.
2468 <title>Ascent</title>
2472 <imagedata fileref="ascent.png" width="5.5in"/>
2477 This tab is shown during Boost, Fast and Coast
2478 phases. The information displayed here helps monitor the
2479 rocket as it heads towards apogee.
2482 The height, speed, acceleration and tilt are shown along
2483 with the maximum values for each of them. This allows you to
2484 quickly answer the most commonly asked questions you'll hear
2488 The current latitude and longitude reported by the GPS are
2489 also shown. Note that under high acceleration, these values
2490 may not get updated as the GPS receiver loses position
2491 fix. Once the rocket starts coasting, the receiver should
2492 start reporting position again.
2495 Finally, the current igniter voltages are reported as in the
2496 Launch Pad tab. This can help diagnose deployment failures
2497 caused by wiring which comes loose under high acceleration.
2501 <title>Descent</title>
2505 <imagedata fileref="descent.png" width="5.5in"/>
2510 Once the rocket has reached apogee and (we hope) activated the
2511 apogee charge, attention switches to tracking the rocket on
2512 the way back to the ground, and for dual-deploy flights,
2513 waiting for the main charge to fire.
2516 To monitor whether the apogee charge operated correctly, the
2517 current descent rate is reported along with the current
2518 height. Good descent rates vary based on the choice of recovery
2519 components, but generally range from 15-30m/s on drogue and should
2520 be below 10m/s when under the main parachute in a dual-deploy flight.
2523 With GPS-equipped flight computers, you can locate the rocket in the
2524 sky using the elevation and bearing information to figure
2525 out where to look. Elevation is in degrees above the
2526 horizon. Bearing is reported in degrees relative to true
2527 north. Range can help figure out how big the rocket will
2528 appear. Ground Distance shows how far it is to a point
2529 directly under the rocket and can help figure out where the
2530 rocket is likely to land. Note that all of these values are
2531 relative to the pad location. If the elevation is near 90°,
2532 the rocket is over the pad, not over you.
2535 Finally, the igniter voltages are reported in this tab as
2536 well, both to monitor the main charge as well as to see what
2537 the status of the apogee charge is. Note that some commercial
2538 e-matches are designed to retain continuity even after being
2539 fired, and will continue to show as green or return from red to
2544 <title>Landed</title>
2548 <imagedata fileref="landed.png" width="5.5in"/>
2553 Once the rocket is on the ground, attention switches to
2554 recovery. While the radio signal is often lost once the
2555 rocket is on the ground, the last reported GPS position is
2556 generally within a short distance of the actual landing location.
2559 The last reported GPS position is reported both by
2560 latitude and longitude as well as a bearing and distance from
2561 the launch pad. The distance should give you a good idea of
2562 whether to walk or hitch a ride. Take the reported
2563 latitude and longitude and enter them into your hand-held GPS
2564 unit and have that compute a track to the landing location.
2567 Our flight computers will continue to transmit RDF
2568 tones after landing, allowing you to locate the rocket by
2569 following the radio signal if necessary. You may need to get
2570 away from the clutter of the flight line, or even get up on
2571 a hill (or your neighbor's RV roof) to receive the RDF signal.
2574 The maximum height, speed and acceleration reported
2575 during the flight are displayed for your admiring observers.
2576 The accuracy of these immediate values depends on the quality
2577 of your radio link and how many packets were received.
2578 Recovering the on-board data after flight may yield
2579 more precise results.
2582 To get more detailed information about the flight, you can
2583 click on the 'Graph Flight' button which will bring up a
2584 graph window for the current flight.
2588 <title>Table</title>
2592 <imagedata fileref="table.png" width="5.5in"/>
2597 The table view shows all of the data available from the
2598 flight computer. Probably the most useful data on
2599 this tab is the detailed GPS information, which includes
2600 horizontal dilution of precision information, and
2601 information about the signal being received from the satellites.
2605 <title>Site Map</title>
2609 <imagedata fileref="site-map.png" width="5.5in"/>
2614 When the TeleMetrum has a GPS fix, the Site Map tab will map
2615 the rocket's position to make it easier for you to locate the
2616 rocket, both while it is in the air, and when it has landed. The
2617 rocket's state is indicated by color: white for pad, red for
2618 boost, pink for fast, yellow for coast, light blue for drogue,
2619 dark blue for main, and black for landed.
2622 The map's scale is approximately 3m (10ft) per pixel. The map
2623 can be dragged using the left mouse button. The map will attempt
2624 to keep the rocket roughly centered while data is being received.
2627 Images are fetched automatically via the Google Maps Static API,
2628 and cached on disk for reuse. If map images cannot be downloaded,
2629 the rocket's path will be traced on a dark gray background
2633 You can pre-load images for your favorite launch sites
2634 before you leave home; check out the 'Preload Maps' section below.
2639 <title>Save Flight Data</title>
2641 The altimeter records flight data to its internal flash memory.
2642 TeleMetrum data is recorded at a much higher rate than the telemetry
2643 system can handle, and is not subject to radio drop-outs. As
2644 such, it provides a more complete and precise record of the
2645 flight. The 'Save Flight Data' button allows you to read the
2646 flash memory and write it to disk.
2649 Clicking on the 'Save Flight Data' button brings up a list of
2650 connected flight computers and TeleDongle devices. If you select a
2651 flight computer, the flight data will be downloaded from that
2652 device directly. If you select a TeleDongle device, flight data
2653 will be downloaded from a flight computer over radio link via the
2654 specified TeleDongle. See the chapter on Controlling An Altimeter
2655 Over The Radio Link for more information.
2658 After the device has been selected, a dialog showing the
2659 flight data saved in the device will be shown allowing you to
2660 select which flights to download and which to delete. With
2661 version 0.9 or newer firmware, you must erase flights in order
2662 for the space they consume to be reused by another
2663 flight. This prevents accidentally losing flight data
2664 if you neglect to download data before flying again. Note that
2665 if there is no more space available in the device, then no
2666 data will be recorded during the next flight.
2669 The file name for each flight log is computed automatically
2670 from the recorded flight date, altimeter serial number and
2671 flight number information.
2675 <title>Replay Flight</title>
2677 Select this button and you are prompted to select a flight
2678 record file, either a .telem file recording telemetry data or a
2679 .eeprom file containing flight data saved from the altimeter
2683 Once a flight record is selected, the flight monitor interface
2684 is displayed and the flight is re-enacted in real time. Check
2685 the Monitor Flight chapter above to learn how this window operates.
2689 <title>Graph Data</title>
2691 Select this button and you are prompted to select a flight
2692 record file, either a .telem file recording telemetry data or a
2693 .eeprom file containing flight data saved from
2697 Note that telemetry files will generally produce poor graphs
2698 due to the lower sampling rate and missed telemetry packets.
2699 Use saved flight data in .eeprom files for graphing where possible.
2702 Once a flight record is selected, a window with multiple tabs is
2706 <title>Flight Graph</title>
2710 <imagedata fileref="graph.png" width="6in" scalefit="1"/>
2715 By default, the graph contains acceleration (blue),
2716 velocity (green) and altitude (red).
2719 The graph can be zoomed into a particular area by clicking and
2720 dragging down and to the right. Once zoomed, the graph can be
2721 reset by clicking and dragging up and to the left. Holding down
2722 control and clicking and dragging allows the graph to be panned.
2723 The right mouse button causes a pop-up menu to be displayed, giving
2724 you the option save or print the plot.
2728 <title>Configure Graph</title>
2732 <imagedata fileref="graph-configure.png" width="6in" scalefit="1"/>
2737 This selects which graph elements to show, and, at the
2738 very bottom, lets you switch between metric and
2743 <title>Flight Statistics</title>
2747 <imagedata fileref="graph-stats.png" width="6in" scalefit="1"/>
2752 Shows overall data computed from the flight.
2760 <imagedata fileref="graph-map.png" width="6in" scalefit="1"/>
2765 Shows a satellite image of the flight area overlaid
2766 with the path of the flight. The red concentric
2767 circles mark the launch pad, the black concentric
2768 circles mark the landing location.
2773 <title>Export Data</title>
2775 This tool takes the raw data files and makes them available for
2776 external analysis. When you select this button, you are prompted to
2777 select a flight data file, which can be either a .eeprom or .telem.
2778 The .eeprom files contain higher resolution and more continuous data,
2779 while .telem files contain receiver signal strength information.
2780 Next, a second dialog appears which is used to select
2781 where to write the resulting file. It has a selector to choose
2782 between CSV and KML file formats.
2785 <title>Comma Separated Value Format</title>
2787 This is a text file containing the data in a form suitable for
2788 import into a spreadsheet or other external data analysis
2789 tool. The first few lines of the file contain the version and
2790 configuration information from the altimeter, then
2791 there is a single header line which labels all of the
2792 fields. All of these lines start with a '#' character which
2793 many tools can be configured to skip over.
2796 The remaining lines of the file contain the data, with each
2797 field separated by a comma and at least one space. All of
2798 the sensor values are converted to standard units, with the
2799 barometric data reported in both pressure, altitude and
2800 height above pad units.
2804 <title>Keyhole Markup Language (for Google Earth)</title>
2806 This is the format used by Google Earth to provide an overlay
2807 within that application. With this, you can use Google Earth to
2808 see the whole flight path in 3D.
2813 <title>Configure Altimeter</title>
2817 <imagedata fileref="configure-altimeter.png" width="3.6in" scalefit="1"/>
2822 Select this button and then select either an altimeter or
2823 TeleDongle Device from the list provided. Selecting a TeleDongle
2824 device will use the radio link to configure a remote altimeter.
2827 The first few lines of the dialog provide information about the
2828 connected device, including the product name,
2829 software version and hardware serial number. Below that are the
2830 individual configuration entries.
2833 At the bottom of the dialog, there are four buttons:
2840 This writes any changes to the
2841 configuration parameter block in flash memory. If you don't
2842 press this button, any changes you make will be lost.
2850 This resets the dialog to the most recently saved values,
2851 erasing any changes you have made.
2859 This reboots the device. Use this to
2860 switch from idle to pad mode by rebooting once the rocket is
2861 oriented for flight, or to confirm changes you think you saved
2870 This closes the dialog. Any unsaved changes will be
2877 The rest of the dialog contains the parameters to be configured.
2880 <title>Main Deploy Altitude</title>
2882 This sets the altitude (above the recorded pad altitude) at
2883 which the 'main' igniter will fire. The drop-down menu shows
2884 some common values, but you can edit the text directly and
2885 choose whatever you like. If the apogee charge fires below
2886 this altitude, then the main charge will fire two seconds
2887 after the apogee charge fires.
2891 <title>Apogee Delay</title>
2893 When flying redundant electronics, it's often important to
2894 ensure that multiple apogee charges don't fire at precisely
2895 the same time, as that can over pressurize the apogee deployment
2896 bay and cause a structural failure of the air-frame. The Apogee
2897 Delay parameter tells the flight computer to fire the apogee
2898 charge a certain number of seconds after apogee has been
2903 <title>Radio Frequency</title>
2905 This configures which of the frequencies to use for both
2906 telemetry and packet command mode. Note that if you set this
2907 value via packet command mode, the TeleDongle frequency will
2908 also be automatically reconfigured to match so that
2909 communication will continue afterwards.
2913 <title>RF Calibration</title>
2915 The radios in every Altus Metrum device are calibrated at the
2916 factory to ensure that they transmit and receive on the
2917 specified frequency. If you need to you can adjust the calibration
2918 by changing this value. Do not do this without understanding what
2919 the value means, read the appendix on calibration and/or the source
2920 code for more information. To change a TeleDongle's calibration,
2921 you must reprogram the unit completely.
2925 <title>Telemetry/RDF/APRS Enable</title>
2927 Enables the radio for transmission during flight. When
2928 disabled, the radio will not transmit anything during flight
2933 <title>APRS Interval</title>
2935 How often to transmit GPS information via APRS. This option
2936 is available on TeleMetrum v2 and TeleMega
2937 boards. TeleMetrum v1 boards cannot transmit APRS
2938 packets. Note that a single APRS packet takes nearly a full
2939 second to transmit, so enabling this option will prevent
2940 sending any other telemetry during that time.
2944 <title>Callsign</title>
2946 This sets the call sign included in each telemetry packet. Set this
2947 as needed to conform to your local radio regulations.
2951 <title>Maximum Flight Log Size</title>
2953 This sets the space (in kilobytes) allocated for each flight
2954 log. The available space will be divided into chunks of this
2955 size. A smaller value will allow more flights to be stored,
2956 a larger value will record data from longer flights.
2960 <title>Ignite Mode</title>
2962 TeleMetrum and TeleMini provide two igniter channels as they
2963 were originally designed as dual-deploy flight
2964 computers. This configuration parameter allows the two
2965 channels to be used in different configurations.
2969 <term>Dual Deploy</term>
2972 This is the usual mode of operation; the
2973 'apogee' channel is fired at apogee and the 'main'
2974 channel at the height above ground specified by the
2975 'Main Deploy Altitude' during descent.
2980 <term>Redundant Apogee</term>
2983 This fires both channels at
2984 apogee, the 'apogee' channel first followed after a two second
2985 delay by the 'main' channel.
2990 <term>Redundant Main</term>
2993 This fires both channels at the
2994 height above ground specified by the Main Deploy
2995 Altitude setting during descent. The 'apogee'
2996 channel is fired first, followed after a two second
2997 delay by the 'main' channel.
3004 <title>Pad Orientation</title>
3006 Because they include accelerometers, TeleMetrum and
3007 TeleMega are sensitive to the orientation of the board. By
3008 default, they expect the antenna end to point forward. This
3009 parameter allows that default to be changed, permitting the
3010 board to be mounted with the antenna pointing aft instead.
3014 <term>Antenna Up</term>
3017 In this mode, the antenna end of the
3018 flight computer must point forward, in line with the
3019 expected flight path.
3024 <term>Antenna Down</term>
3027 In this mode, the antenna end of the
3028 flight computer must point aft, in line with the
3029 expected flight path.
3036 <title>Configure Pyro Channels</title>
3040 <imagedata fileref="configure-pyro.png" width="6in" scalefit="1"/>
3045 This opens a separate window to configure the additional
3046 pyro channels available on TeleMega. One column is
3047 presented for each channel. Each row represents a single
3048 parameter, if enabled the parameter must meet the specified
3049 test for the pyro channel to be fired. See the Pyro Channels
3050 section in the System Operation chapter above for a
3051 description of these parameters.
3054 Select conditions and set the related value; the pyro
3055 channel will be activated when <emphasis>all</emphasis> of the
3056 conditions are met. Each pyro channel has a separate set of
3057 configuration values, so you can use different values for
3058 the same condition with different channels.
3061 Once you have selected the appropriate configuration for all
3062 of the necessary pyro channels, you can save the pyro
3063 configuration along with the rest of the flight computer
3064 configuration by pressing the 'Save' button in the main
3065 Configure Flight Computer window.
3070 <title>Configure AltosUI</title>
3074 <imagedata fileref="configure-altosui.png" width="2.4in" scalefit="1"/>
3079 This button presents a dialog so that you can configure the AltosUI global settings.
3082 <title>Voice Settings</title>
3084 AltosUI provides voice announcements during flight so that you
3085 can keep your eyes on the sky and still get information about
3086 the current flight status. However, sometimes you don't want
3093 <para>Turns all voice announcements on and off</para>
3097 <term>Test Voice</term>
3100 Plays a short message allowing you to verify
3101 that the audio system is working and the volume settings
3109 <title>Log Directory</title>
3111 AltosUI logs all telemetry data and saves all TeleMetrum flash
3112 data to this directory. This directory is also used as the
3113 staring point when selecting data files for display or export.
3116 Click on the directory name to bring up a directory choosing
3117 dialog, select a new directory and click 'Select Directory' to
3118 change where AltosUI reads and writes data files.
3122 <title>Callsign</title>
3124 This value is transmitted in each command packet sent from
3125 TeleDongle and received from an altimeter. It is not used in
3126 telemetry mode, as the callsign configured in the altimeter board
3127 is included in all telemetry packets. Configure this
3128 with the AltosUI operators call sign as needed to comply with
3129 your local radio regulations.
3132 Note that to successfully command a flight computer over the radio
3133 (to configure the altimeter, monitor idle, or fire pyro charges),
3134 the callsign configured here must exactly match the callsign
3135 configured in the flight computer. This matching is case
3140 <title>Imperial Units</title>
3142 This switches between metric units (meters) and imperial
3143 units (feet and miles). This affects the display of values
3144 use during flight monitoring, configuration, data graphing
3145 and all of the voice announcements. It does not change the
3146 units used when exporting to CSV files, those are always
3147 produced in metric units.
3151 <title>Font Size</title>
3153 Selects the set of fonts used in the flight monitor
3154 window. Choose between the small, medium and large sets.
3158 <title>Serial Debug</title>
3160 This causes all communication with a connected device to be
3161 dumped to the console from which AltosUI was started. If
3162 you've started it from an icon or menu entry, the output
3163 will simply be discarded. This mode can be useful to debug
3164 various serial communication issues.
3168 <title>Manage Frequencies</title>
3170 This brings up a dialog where you can configure the set of
3171 frequencies shown in the various frequency menus. You can
3172 add as many as you like, or even reconfigure the default
3173 set. Changing this list does not affect the frequency
3174 settings of any devices, it only changes the set of
3175 frequencies shown in the menus.
3180 <title>Configure Groundstation</title>
3184 <imagedata fileref="configure-groundstation.png" width="3.1in" scalefit="1"/>
3189 Select this button and then select a TeleDongle Device from the list provided.
3192 The first few lines of the dialog provide information about the
3193 connected device, including the product name,
3194 software version and hardware serial number. Below that are the
3195 individual configuration entries.
3198 Note that the TeleDongle itself doesn't save any configuration
3199 data, the settings here are recorded on the local machine in
3200 the Java preferences database. Moving the TeleDongle to
3201 another machine, or using a different user account on the same
3202 machine will cause settings made here to have no effect.
3205 At the bottom of the dialog, there are three buttons:
3212 This writes any changes to the
3213 local Java preferences file. If you don't
3214 press this button, any changes you make will be lost.
3222 This resets the dialog to the most recently saved values,
3223 erasing any changes you have made.
3231 This closes the dialog. Any unsaved changes will be
3238 The rest of the dialog contains the parameters to be configured.
3241 <title>Frequency</title>
3243 This configures the frequency to use for both telemetry and
3244 packet command mode. Set this before starting any operation
3245 involving packet command mode so that it will use the right
3246 frequency. Telemetry monitoring mode also provides a menu to
3247 change the frequency, and that menu also sets the same Java
3248 preference value used here.
3252 <title>Radio Calibration</title>
3254 The radios in every Altus Metrum device are calibrated at the
3255 factory to ensure that they transmit and receive on the
3256 specified frequency. To change a TeleDongle's calibration,
3257 you must reprogram the unit completely, so this entry simply
3258 shows the current value and doesn't allow any changes.
3263 <title>Flash Image</title>
3265 This reprograms Altus Metrum devices with new
3266 firmware. TeleMetrum v1.x, TeleDongle, TeleMini and TeleBT are
3267 all reprogrammed by using another similar unit as a
3268 programming dongle (pair programming). TeleMega, TeleMetrum v2
3269 and EasyMini are all programmed directly over their USB ports
3270 (self programming). Please read the directions for flashing
3271 devices in the Updating Device Firmware chapter below.
3275 <title>Fire Igniter</title>
3279 <imagedata fileref="fire-igniter.png" width="1.2in" scalefit="1"/>
3284 This activates the igniter circuits in the flight computer to help
3285 test recovery systems deployment. Because this command can operate
3286 over the Packet Command Link, you can prepare the rocket as
3287 for flight and then test the recovery system without needing
3288 to snake wires inside the air-frame.
3291 Selecting the 'Fire Igniter' button brings up the usual device
3292 selection dialog. Pick the desired device. This brings up another
3293 window which shows the current continuity test status for all
3294 of the pyro channels.
3297 Next, select the desired igniter to fire. This will enable the
3301 Select the 'Arm' button. This enables the 'Fire' button. The
3302 word 'Arm' is replaced by a countdown timer indicating that
3303 you have 10 seconds to press the 'Fire' button or the system
3304 will deactivate, at which point you start over again at
3305 selecting the desired igniter.
3309 <title>Scan Channels</title>
3313 <imagedata fileref="scan-channels.png" width="3.2in" scalefit="1"/>
3318 This listens for telemetry packets on all of the configured
3319 frequencies, displaying information about each device it
3320 receives a packet from. You can select which of the three
3321 telemetry formats should be tried; by default, it only listens
3322 for the standard telemetry packets used in v1.0 and later
3327 <title>Load Maps</title>
3331 <imagedata fileref="load-maps.png" width="5.2in" scalefit="1"/>
3336 Before heading out to a new launch site, you can use this to
3337 load satellite images in case you don't have internet
3338 connectivity at the site. This loads a fairly large area
3339 around the launch site, which should cover any flight you're likely to make.
3342 There's a drop-down menu of launch sites we know about; if
3343 your favorites aren't there, please let us know the lat/lon
3344 and name of the site. The contents of this list are actually
3345 downloaded from our server at run-time, so as new sites are sent
3346 in, they'll get automatically added to this list.
3349 If the launch site isn't in the list, you can manually enter the lat/lon values
3352 Clicking the 'Load Map' button will fetch images from Google
3353 Maps; note that Google limits how many images you can fetch at
3354 once, so if you load more than one launch site, you may get
3355 some gray areas in the map which indicate that Google is tired
3356 of sending data to you. Try again later.
3360 <title>Monitor Idle</title>
3362 This brings up a dialog similar to the Monitor Flight UI,
3363 except it works with the altimeter in “idle” mode by sending
3364 query commands to discover the current state rather than
3365 listening for telemetry packets. Because this uses command
3366 mode, it needs to have the TeleDongle and flight computer
3367 callsigns match exactly. If you can receive telemetry, but
3368 cannot manage to run Monitor Idle, then it's very likely that
3369 your callsigns are different in some way.
3374 <title>AltosDroid</title>
3376 AltosDroid provides the same flight monitoring capabilities as
3377 AltosUI, but runs on Android devices and is designed to connect
3378 to a TeleBT receiver over Bluetooth™. AltosDroid monitors
3379 telemetry data, logging it to internal storage in the Android
3380 device, and presents that data in a UI the same way the 'Monitor
3381 Flight' window does in AltosUI.
3384 This manual will explain how to configure AltosDroid, connect
3385 to TeleBT, operate the flight monitoring interface and describe
3386 what the displayed data means.
3389 <title>Installing AltosDroid</title>
3391 AltosDroid is available from the Google Play store. To install
3392 it on your Android device, open the Google Play Store
3393 application and search for “altosdroid”. Make sure you don't
3394 have a space between “altos” and “droid” or you probably won't
3395 find what you want. That should bring you to the right page
3396 from which you can download and install the application.
3400 <title>Connecting to TeleBT</title>
3402 Press the Android 'Menu' button or soft-key to see the
3403 configuration options available. Select the 'Connect a device'
3404 option and then the 'Scan for devices' entry at the bottom to
3405 look for your TeleBT device. Select your device, and when it
3406 asks for the code, enter '1234'.
3409 Subsequent connections will not require you to enter that
3410 code, and your 'paired' device will appear in the list without
3415 <title>Configuring AltosDroid</title>
3417 The only configuration option available for AltosDroid is
3418 which frequency to listen on. Press the Android 'Menu' button
3419 or soft-key and pick the 'Select radio frequency' entry. That
3420 brings up a menu of pre-set radio frequencies; pick the one
3421 which matches your altimeter.
3425 <title>AltosDroid Flight Monitoring</title>
3427 AltosDroid is designed to mimic the AltosUI flight monitoring
3428 display, providing separate tabs for each stage of your rocket
3429 flight along with a tab containing a map of the local area
3430 with icons marking the current location of the altimeter and
3436 The 'Launch Pad' tab shows information used to decide when the
3437 rocket is ready for flight. The first elements include red/green
3438 indicators, if any of these is red, you'll want to evaluate
3439 whether the rocket is ready to launch:
3442 <term>Battery Voltage</term>
3445 This indicates whether the Li-Po battery
3446 powering the TeleMetrum has sufficient charge to last for
3447 the duration of the flight. A value of more than
3448 3.8V is required for a 'GO' status.
3453 <term>Apogee Igniter Voltage</term>
3456 This indicates whether the apogee
3457 igniter has continuity. If the igniter has a low
3458 resistance, then the voltage measured here will be close
3459 to the Li-Po battery voltage. A value greater than 3.2V is
3460 required for a 'GO' status.
3465 <term>Main Igniter Voltage</term>
3468 This indicates whether the main
3469 igniter has continuity. If the igniter has a low
3470 resistance, then the voltage measured here will be close
3471 to the Li-Po battery voltage. A value greater than 3.2V is
3472 required for a 'GO' status.
3477 <term>On-board Data Logging</term>
3480 This indicates whether there is
3481 space remaining on-board to store flight data for the
3482 upcoming flight. If you've downloaded data, but failed
3483 to erase flights, there may not be any space
3484 left. TeleMetrum can store multiple flights, depending
3485 on the configured maximum flight log size. TeleMini
3486 stores only a single flight, so it will need to be
3487 downloaded and erased after each flight to capture
3488 data. This only affects on-board flight logging; the
3489 altimeter will still transmit telemetry and fire
3490 ejection charges at the proper times.
3495 <term>GPS Locked</term>
3498 For a TeleMetrum or TeleMega device, this indicates whether the GPS receiver is
3499 currently able to compute position information. GPS requires
3500 at least 4 satellites to compute an accurate position.
3505 <term>GPS Ready</term>
3508 For a TeleMetrum or TeleMega device, this indicates whether GPS has reported at least
3509 10 consecutive positions without losing lock. This ensures
3510 that the GPS receiver has reliable reception from the
3518 The Launchpad tab also shows the computed launch pad position
3519 and altitude, averaging many reported positions to improve the
3520 accuracy of the fix.
3525 <title>Downloading Flight Logs</title>
3527 AltosDroid always saves every bit of telemetry data it
3528 receives. To download that to a computer for use with AltosUI,
3529 simply remove the SD card from your Android device, or connect
3530 your device to your computer's USB port and browse the files
3531 on that device. You will find '.telem' files in the TeleMetrum
3532 directory that will work with AltosUI directly.
3537 <title>Using Altus Metrum Products</title>
3539 <title>Being Legal</title>
3541 First off, in the US, you need an <ulink url="http://www.altusmetrum.org/Radio/">amateur radio license</ulink> or
3542 other authorization to legally operate the radio transmitters that are part
3547 <title>In the Rocket</title>
3549 In the rocket itself, you just need a flight computer and
3550 a single-cell, 3.7 volt nominal Li-Po rechargeable battery. An
3551 850mAh battery weighs less than a 9V alkaline battery, and will
3552 run a TeleMetrum or TeleMega for hours.
3553 A 110mAh battery weighs less than a triple A battery and is a good
3554 choice for use with TeleMini.
3557 By default, we ship flight computers with a simple wire antenna.
3558 If your electronics bay or the air-frame it resides within is made
3559 of carbon fiber, which is opaque to RF signals, you may prefer to
3560 install an SMA connector so that you can run a coaxial cable to an
3561 antenna mounted elsewhere in the rocket. However, note that the
3562 GPS antenna is fixed on all current products, so you really want
3563 to install the flight computer in a bay made of RF-transparent
3564 materials if at all possible.
3568 <title>On the Ground</title>
3570 To receive the data stream from the rocket, you need an antenna and short
3571 feed-line connected to one of our <ulink url="http://www.altusmetrum.org/TeleDongle/">TeleDongle</ulink> units. If possible, use an SMA to BNC
3572 adapter instead of feedline between the antenna feedpoint and
3573 TeleDongle, as this will give you the best performance. The
3574 TeleDongle in turn plugs directly into the USB port on a notebook
3575 computer. Because TeleDongle looks like a simple serial port, your computer
3576 does not require special device drivers... just plug it in.
3579 The GUI tool, AltosUI, is written in Java and runs across
3580 Linux, Mac OS and Windows. There's also a suite of C tools
3581 for Linux which can perform most of the same tasks.
3584 Alternatively, a TeleBT attached with an SMA to BNC adapter at the
3585 feed point of a hand-held yagi used in conjunction with an Android
3586 device running AltosDroid makes an outstanding ground station.
3589 After the flight, you can use the radio link to extract the more detailed data
3590 logged in either TeleMetrum or TeleMini devices, or you can use a mini USB cable to plug into the
3591 TeleMetrum board directly. Pulling out the data without having to open up
3592 the rocket is pretty cool! A USB cable is also how you charge the Li-Po
3593 battery, so you'll want one of those anyway... the same cable used by lots
3594 of digital cameras and other modern electronic stuff will work fine.
3597 If your rocket lands out of sight, you may enjoy having a hand-held
3598 GPS receiver, so that you can put in a way-point for the last
3599 reported rocket position before touch-down. This makes looking for
3600 your rocket a lot like Geo-Caching... just go to the way-point and
3601 look around starting from there. AltosDroid on an Android device
3602 with GPS receiver works great for this, too!
3605 You may also enjoy having a ham radio “HT” that covers the 70cm band... you
3606 can use that with your antenna to direction-find the rocket on the ground
3607 the same way you can use a Walston or Beeline tracker. This can be handy
3608 if the rocket is hiding in sage brush or a tree, or if the last GPS position
3609 doesn't get you close enough because the rocket dropped into a canyon, or
3610 the wind is blowing it across a dry lake bed, or something like that... Keith
3611 currently uses a Yaesu VX-7R, Bdale has a Baofung UV-5R
3612 which isn't as nice, but was a whole lot cheaper.
3615 So, to recap, on the ground the hardware you'll need includes:
3616 <orderedlist inheritnum='inherit' numeration='arabic'>
3619 an antenna and feed-line or adapter
3634 optionally, a hand-held GPS receiver
3639 optionally, an HT or receiver covering 435 MHz
3645 The best hand-held commercial directional antennas we've found for radio
3646 direction finding rockets are from
3647 <ulink url="http://www.arrowantennas.com/" >
3650 The 440-3 and 440-5 are both good choices for finding a
3651 TeleMetrum- or TeleMini- equipped rocket when used with a suitable
3652 70cm HT. TeleDongle and an SMA to BNC adapter fit perfectly
3653 between the driven element and reflector of Arrow antennas.
3657 <title>Data Analysis</title>
3659 Our software makes it easy to log the data from each flight, both the
3660 telemetry received during the flight itself, and the more
3661 complete data log recorded in the flash memory on the altimeter
3662 board. Once this data is on your computer, our post-flight tools make it
3663 easy to quickly get to the numbers everyone wants, like apogee altitude,
3664 max acceleration, and max velocity. You can also generate and view a
3665 standard set of plots showing the altitude, acceleration, and
3666 velocity of the rocket during flight. And you can even export a TeleMetrum data file
3667 usable with Google Maps and Google Earth for visualizing the flight path
3668 in two or three dimensions!
3671 Our ultimate goal is to emit a set of files for each flight that can be
3672 published as a web page per flight, or just viewed on your local disk with
3677 <title>Future Plans</title>
3679 We've designed a simple GPS based radio tracker called TeleGPS.
3680 If all goes well, we hope to introduce this in the first
3684 We have designed and prototyped several “companion boards” that
3685 can attach to the companion connector on TeleMetrum and TeleMega
3686 flight computers to collect more data, provide more pyro channels,
3687 and so forth. We do not yet know if or when any of these boards
3688 will be produced in enough quantity to sell. If you have specific
3689 interests for data collection or control of events in your rockets
3690 beyond the capabilities of our existing productions, please let
3694 Because all of our work is open, both the hardware designs and the
3695 software, if you have some great idea for an addition to the current
3696 Altus Metrum family, feel free to dive in and help! Or let us know
3697 what you'd like to see that we aren't already working on, and maybe
3698 we'll get excited about it too...
3702 <ulink url="http://altusmetrum.org/">web site</ulink> for more news
3703 and information as our family of products evolves!
3708 <title>Altimeter Installation Recommendations</title>
3710 Building high-power rockets that fly safely is hard enough. Mix
3711 in some sophisticated electronics and a bunch of radio energy
3712 and some creativity and/or compromise may be required. This chapter
3713 contains some suggestions about how to install Altus Metrum
3714 products into a rocket air-frame, including how to safely and
3715 reliably mix a variety of electronics into the same air-frame.
3718 <title>Mounting the Altimeter</title>
3720 The first consideration is to ensure that the altimeter is
3721 securely fastened to the air-frame. For most of our products, we
3722 prefer nylon standoffs and nylon screws; they're good to at least 50G
3723 and cannot cause any electrical issues on the board. Metal screws
3724 and standoffs are fine, too, just be careful to avoid electrical
3725 shorts! For TeleMini v1.0, we usually cut small pieces of 1/16 inch
3727 under the screw holes, and then take 2x56 nylon screws and
3728 screw them through the TeleMini mounting holes, through the
3729 balsa and into the underlying material.
3731 <orderedlist inheritnum='inherit' numeration='arabic'>
3734 Make sure accelerometer-equipped products like TeleMetrum and
3735 TeleMega are aligned precisely along the axis of
3736 acceleration so that the accelerometer can accurately
3737 capture data during the flight.
3742 Watch for any metal touching components on the
3743 board. Shorting out connections on the bottom of the board
3744 can cause the altimeter to fail during flight.
3750 <title>Dealing with the Antenna</title>
3752 The antenna supplied is just a piece of solid, insulated,
3753 wire. If it gets damaged or broken, it can be easily
3754 replaced. It should be kept straight and not cut; bending or
3755 cutting it will change the resonant frequency and/or
3756 impedance, making it a less efficient radiator and thus
3757 reducing the range of the telemetry signal.
3760 Keeping metal away from the antenna will provide better range
3761 and a more even radiation pattern. In most rockets, it's not
3762 entirely possible to isolate the antenna from metal
3763 components; there are often bolts, all-thread and wires from other
3764 electronics to contend with. Just be aware that the more stuff
3765 like this around the antenna, the lower the range.
3768 Make sure the antenna is not inside a tube made or covered
3769 with conducting material. Carbon fiber is the most common
3770 culprit here -- CF is a good conductor and will effectively
3771 shield the antenna, dramatically reducing signal strength and
3772 range. Metallic flake paint is another effective shielding
3773 material which should be avoided around any antennas.
3776 If the ebay is large enough, it can be convenient to simply
3777 mount the altimeter at one end and stretch the antenna out
3778 inside. Taping the antenna to the sled can keep it straight
3779 under acceleration. If there are metal rods, keep the
3780 antenna as far away as possible.
3783 For a shorter ebay, it's quite practical to have the antenna
3784 run through a bulkhead and into an adjacent bay. Drill a small
3785 hole in the bulkhead, pass the antenna wire through it and
3786 then seal it up with glue or clay. We've also used acrylic
3787 tubing to create a cavity for the antenna wire. This works a
3788 bit better in that the antenna is known to stay straight and
3789 not get folded by recovery components in the bay. Angle the
3790 tubing towards the side wall of the rocket and it ends up
3791 consuming very little space.
3794 If you need to place the UHF antenna at a distance from the
3795 altimeter, you can replace the antenna with an edge-mounted
3796 SMA connector, and then run 50Ω coax from the board to the
3797 antenna. Building a remote antenna is beyond the scope of this
3802 <title>Preserving GPS Reception</title>
3804 The GPS antenna and receiver used in TeleMetrum and TeleMega is
3805 highly sensitive and normally have no trouble tracking enough
3806 satellites to provide accurate position information for
3807 recovering the rocket. However, there are many ways the GPS signal
3808 can end up attenuated, negatively affecting GPS performance.
3809 <orderedlist inheritnum='inherit' numeration='arabic'>
3812 Conductive tubing or coatings. Carbon fiber and metal
3813 tubing, or metallic paint will all dramatically attenuate the
3814 GPS signal. We've never heard of anyone successfully
3815 receiving GPS from inside these materials.
3820 Metal components near the GPS patch antenna. These will
3821 de-tune the patch antenna, changing the resonant frequency
3822 away from the L1 carrier and reduce the effectiveness of the
3823 antenna. You can place as much stuff as you like beneath the
3824 antenna as that's covered with a ground plane. But, keep
3825 wires and metal out from above the patch antenna.
3832 <title>Radio Frequency Interference</title>
3834 Any altimeter will generate RFI; the digital circuits use
3835 high-frequency clocks that spray radio interference across a
3836 wide band. Altus Metrum altimeters generate intentional radio
3837 signals as well, increasing the amount of RF energy around the board.
3840 Rocketry altimeters also use precise sensors measuring air
3841 pressure and acceleration. Tiny changes in voltage can cause
3842 these sensor readings to vary by a huge amount. When the
3843 sensors start mis-reporting data, the altimeter can either
3844 fire the igniters at the wrong time, or not fire them at all.
3847 Voltages are induced when radio frequency energy is
3848 transmitted from one circuit to another. Here are things that
3849 influence the induced voltage and current:
3854 Keep wires from different circuits apart. Moving circuits
3855 further apart will reduce RFI.
3860 Avoid parallel wires from different circuits. The longer two
3861 wires run parallel to one another, the larger the amount of
3862 transferred energy. Cross wires at right angles to reduce
3868 Twist wires from the same circuits. Two wires the same
3869 distance from the transmitter will get the same amount of
3870 induced energy which will then cancel out. Any time you have
3871 a wire pair running together, twist the pair together to
3872 even out distances and reduce RFI. For altimeters, this
3873 includes battery leads, switch hookups and igniter
3879 Avoid resonant lengths. Know what frequencies are present
3880 in the environment and avoid having wire lengths near a
3881 natural resonant length. Altus Metrum products transmit on the
3882 70cm amateur band, so you should avoid lengths that are a
3883 simple ratio of that length; essentially any multiple of ¼
3884 of the wavelength (17.5cm).
3890 <title>The Barometric Sensor</title>
3892 Altusmetrum altimeters measure altitude with a barometric
3893 sensor, essentially measuring the amount of air above the
3894 rocket to figure out how high it is. A large number of
3895 measurements are taken as the altimeter initializes itself to
3896 figure out the pad altitude. Subsequent measurements are then
3897 used to compute the height above the pad.
3900 To accurately measure atmospheric pressure, the ebay
3901 containing the altimeter must be vented outside the
3902 air-frame. The vent must be placed in a region of linear
3903 airflow, have smooth edges, and away from areas of increasing or
3904 decreasing pressure.
3907 All barometric sensors are quite sensitive to chemical damage from
3908 the products of APCP or BP combustion, so make sure the ebay is
3909 carefully sealed from any compartment which contains ejection
3914 <title>Ground Testing</title>
3916 The most important aspect of any installation is careful
3917 ground testing. Bringing an air-frame up to the LCO table which
3918 hasn't been ground tested can lead to delays or ejection
3919 charges firing on the pad, or, even worse, a recovery system
3923 Do a 'full systems' test that includes wiring up all igniters
3924 without any BP and turning on all of the electronics in flight
3925 mode. This will catch any mistakes in wiring and any residual
3926 RFI issues that might accidentally fire igniters at the wrong
3927 time. Let the air-frame sit for several minutes, checking for
3928 adequate telemetry signal strength and GPS lock. If any igniters
3929 fire unexpectedly, find and resolve the issue before loading any
3933 Ground test the ejection charges. Prepare the rocket for
3934 flight, loading ejection charges and igniters. Completely
3935 assemble the air-frame and then use the 'Fire Igniters'
3936 interface through a TeleDongle to command each charge to
3937 fire. Make sure the charge is sufficient to robustly separate
3938 the air-frame and deploy the recovery system.
3943 <title>Updating Device Firmware</title>
3945 TeleMega, TeleMetrum v2 and EasyMini are all programmed directly
3946 over their USB connectors (self programming). TeleMetrum v1, TeleMini and
3947 TeleDongle are all programmed by using another device as a
3948 programmer (pair programming). It's important to recognize which
3949 kind of devices you have before trying to reprogram them.
3952 You may wish to begin by ensuring you have current firmware images.
3953 These are distributed as part of the AltOS software bundle that
3954 also includes the AltosUI ground station program. Newer ground
3955 station versions typically work fine with older firmware versions,
3956 so you don't need to update your devices just to try out new
3957 software features. You can always download the most recent
3958 version from <ulink url="http://www.altusmetrum.org/AltOS/"/>.
3961 If you need to update the firmware on a TeleDongle, we recommend
3962 updating the altimeter first, before updating TeleDongle. However,
3963 note that TeleDongle rarely need to be updated. Any firmware version
3964 1.0.1 or later will work, version 1.2.1 may have improved receiver
3965 performance slightly.
3968 Self-programmable devices (TeleMega, TeleMetrum v2 and EasyMini)
3969 are reprogrammed by connecting them to your computer over USB
3973 Updating TeleMega, TeleMetrum v2 or EasyMini Firmware
3975 <orderedlist inheritnum='inherit' numeration='arabic'>
3978 Attach a battery and power switch to the target
3979 device. Power up the device.
3984 Using a Micro USB cable, connect the target device to your
3985 computer's USB socket.
3990 Run AltosUI, and select 'Flash Image' from the File menu.
3995 Select the target device in the Device Selection dialog.
4000 Select the image you want to flash to the device, which
4001 should have a name in the form
4002 <product>-v<product-version>-<software-version>.ihx, such
4003 as TeleMega-v1.0-1.3.0.ihx.
4008 Make sure the configuration parameters are reasonable
4009 looking. If the serial number and/or RF configuration
4010 values aren't right, you'll need to change them.
4015 Hit the 'OK' button and the software should proceed to flash
4016 the device with new firmware, showing a progress bar.
4021 Verify that the device is working by using the 'Configure
4022 Altimeter' item to check over the configuration.
4027 <title>Recovering From Self-Flashing Failure</title>
4029 If the firmware loading fails, it can leave the device
4030 unable to boot. Not to worry, you can force the device to
4031 start the boot loader instead, which will let you try to
4032 flash the device again.
4035 On each device, connecting two pins from one of the exposed
4036 connectors will force the boot loader to start, even if the
4037 regular operating system has been corrupted in some way.
4041 <term>TeleMega</term>
4044 Connect pin 6 and pin 1 of the companion connector. Pin 1
4045 can be identified by the square pad around it, and then
4046 the pins could sequentially across the board. Be very
4047 careful to <emphasis>not</emphasis> short pin 8 to
4048 anything as that is connected directly to the battery. Pin
4049 7 carries 3.3V and the board will crash if that is
4050 connected to pin 1, but shouldn't damage the board.
4055 <term>TeleMetrum v2</term>
4058 Connect pin 6 and pin 1 of the companion connector. Pin 1
4059 can be identified by the square pad around it, and then
4060 the pins could sequentially across the board. Be very
4061 careful to <emphasis>not</emphasis> short pin 8 to
4062 anything as that is connected directly to the battery. Pin
4063 7 carries 3.3V and the board will crash if that is
4064 connected to pin 1, but shouldn't damage the board.
4069 <term>EasyMini</term>
4072 Connect pin 6 and pin 1 of the debug connector, which is
4073 the six holes next to the beeper. Pin 1 can be identified
4074 by the square pad around it, and then the pins could
4075 sequentially across the board, making Pin 6 the one on the
4076 other end of the row.
4084 <title>Pair Programming</title>
4086 The big concept to understand is that you have to use a
4087 TeleMega, TeleMetrum or TeleDongle as a programmer to update a
4088 pair programmed device. Due to limited memory resources in the
4089 cc1111, we don't support programming directly over USB for these
4094 <title>Updating TeleMetrum v1.x Firmware</title>
4095 <orderedlist inheritnum='inherit' numeration='arabic'>
4098 Find the 'programming cable' that you got as part of the starter
4099 kit, that has a red 8-pin MicroMaTch connector on one end and a
4100 red 4-pin MicroMaTch connector on the other end.
4105 Take the 2 screws out of the TeleDongle case to get access
4106 to the circuit board.
4111 Plug the 8-pin end of the programming cable to the
4112 matching connector on the TeleDongle, and the 4-pin end to the
4113 matching connector on the TeleMetrum.
4114 Note that each MicroMaTch connector has an alignment pin that
4115 goes through a hole in the PC board when you have the cable
4121 Attach a battery to the TeleMetrum board.
4126 Plug the TeleDongle into your computer's USB port, and power
4132 Run AltosUI, and select 'Flash Image' from the File menu.
4137 Pick the TeleDongle device from the list, identifying it as the
4143 Select the image you want put on the TeleMetrum, which should have a
4144 name in the form telemetrum-v1.2-1.0.0.ihx. It should be visible
4145 in the default directory, if not you may have to poke around
4146 your system to find it.
4151 Make sure the configuration parameters are reasonable
4152 looking. If the serial number and/or RF configuration
4153 values aren't right, you'll need to change them.
4158 Hit the 'OK' button and the software should proceed to flash
4159 the TeleMetrum with new firmware, showing a progress bar.
4164 Confirm that the TeleMetrum board seems to have updated OK, which you
4165 can do by plugging in to it over USB and using a terminal program
4166 to connect to the board and issue the 'v' command to check
4172 If something goes wrong, give it another try.
4178 <title>Updating TeleMini Firmware</title>
4179 <orderedlist inheritnum='inherit' numeration='arabic'>
4182 You'll need a special 'programming cable' to reprogram the
4183 TeleMini. You can make your own using an 8-pin MicroMaTch
4184 connector on one end and a set of four pins on the other.
4189 Take the 2 screws out of the TeleDongle case to get access
4190 to the circuit board.
4195 Plug the 8-pin end of the programming cable to the matching
4196 connector on the TeleDongle, and the 4-pins into the holes
4197 in the TeleMini circuit board. Note that the MicroMaTch
4198 connector has an alignment pin that goes through a hole in
4199 the PC board when you have the cable oriented correctly, and
4200 that pin 1 on the TeleMini board is marked with a square pad
4201 while the other pins have round pads.
4206 Attach a battery to the TeleMini board.
4211 Plug the TeleDongle into your computer's USB port, and power
4217 Run AltosUI, and select 'Flash Image' from the File menu.
4222 Pick the TeleDongle device from the list, identifying it as the
4228 Select the image you want put on the TeleMini, which should have a
4229 name in the form telemini-v1.0-1.0.0.ihx. It should be visible
4230 in the default directory, if not you may have to poke around
4231 your system to find it.
4236 Make sure the configuration parameters are reasonable
4237 looking. If the serial number and/or RF configuration
4238 values aren't right, you'll need to change them.
4243 Hit the 'OK' button and the software should proceed to flash
4244 the TeleMini with new firmware, showing a progress bar.
4249 Confirm that the TeleMini board seems to have updated OK, which you
4250 can do by configuring it over the radio link through the TeleDongle, or
4251 letting it come up in “flight” mode and listening for telemetry.
4256 If something goes wrong, give it another try.
4262 <title>Updating TeleDongle Firmware</title>
4264 Updating TeleDongle's firmware is just like updating TeleMetrum or TeleMini
4265 firmware, but you use either a TeleMetrum or another TeleDongle as the programmer.
4267 <orderedlist inheritnum='inherit' numeration='arabic'>
4270 Find the 'programming cable' that you got as part of the starter
4271 kit, that has a red 8-pin MicroMaTch connector on one end and a
4272 red 4-pin MicroMaTch connector on the other end.
4277 Find the USB cable that you got as part of the starter kit, and
4278 plug the “mini” end in to the mating connector on TeleMetrum or TeleDongle.
4283 Take the 2 screws out of the TeleDongle case to get access
4284 to the circuit board.
4289 Plug the 8-pin end of the programming cable to the
4290 matching connector on the programmer, and the 4-pin end to the
4291 matching connector on the TeleDongle.
4292 Note that each MicroMaTch connector has an alignment pin that
4293 goes through a hole in the PC board when you have the cable
4299 Attach a battery to the TeleMetrum board if you're using one.
4304 Plug both the programmer and the TeleDongle into your computer's USB
4305 ports, and power up the programmer.
4310 Run AltosUI, and select 'Flash Image' from the File menu.
4315 Pick the programmer device from the list, identifying it as the
4321 Select the image you want put on the TeleDongle, which should have a
4322 name in the form teledongle-v0.2-1.0.0.ihx. It should be visible
4323 in the default directory, if not you may have to poke around
4324 your system to find it.
4329 Make sure the configuration parameters are reasonable
4330 looking. If the serial number and/or RF configuration
4331 values aren't right, you'll need to change them. The TeleDongle
4332 serial number is on the “bottom” of the circuit board, and can
4333 usually be read through the translucent blue plastic case without
4334 needing to remove the board from the case.
4339 Hit the 'OK' button and the software should proceed to flash
4340 the TeleDongle with new firmware, showing a progress bar.
4345 Confirm that the TeleDongle board seems to have updated OK, which you
4346 can do by plugging in to it over USB and using a terminal program
4347 to connect to the board and issue the 'v' command to check
4348 the version, etc. Once you're happy, remove the programming cable
4349 and put the cover back on the TeleDongle.
4354 If something goes wrong, give it another try.
4359 Be careful removing the programming cable from the locking 8-pin
4360 connector on TeleMetrum. You'll need a fingernail or perhaps a thin
4361 screwdriver or knife blade to gently pry the locking ears out
4362 slightly to extract the connector. We used a locking connector on
4363 TeleMetrum to help ensure that the cabling to companion boards
4364 used in a rocket don't ever come loose accidentally in flight.
4369 <title>Hardware Specifications</title>
4372 TeleMega Specifications
4377 Recording altimeter for model rocketry.
4382 Supports dual deployment and four auxiliary pyro channels
4383 (a total of 6 events).
4388 70cm 40mW ham-band transceiver for telemetry down-link.
4393 Barometric pressure sensor good to 100k feet MSL.
4398 1-axis high-g accelerometer for motor characterization, capable of
4404 9-axis IMU including integrated 3-axis accelerometer,
4405 3-axis gyroscope and 3-axis magnetometer.
4410 On-board, integrated uBlox Max 7 GPS receiver with 5Hz update rate capability.
4415 On-board 8 Megabyte non-volatile memory for flight data storage.
4420 USB interface for battery charging, configuration, and data recovery.
4425 Fully integrated support for Li-Po rechargeable batteries.
4430 Can use either main system Li-Po or optional separate pyro battery
4436 3.25 x 1.25 inch board designed to fit inside 38mm air-frame coupler tube.
4443 TeleMetrum v2 Specifications
4448 Recording altimeter for model rocketry.
4453 Supports dual deployment (can fire 2 ejection charges).
4458 70cm, 40mW ham-band transceiver for telemetry down-link.
4463 Barometric pressure sensor good to 100k feet MSL.
4468 1-axis high-g accelerometer for motor characterization, capable of
4474 On-board, integrated uBlox Max 7 GPS receiver with 5Hz update rate capability.
4479 On-board 8 Megabyte non-volatile memory for flight data storage.
4484 USB interface for battery charging, configuration, and data recovery.
4489 Fully integrated support for Li-Po rechargeable batteries.
4494 Uses Li-Po to fire e-matches, can be modified to support
4495 optional separate pyro battery if needed.
4500 2.75 x 1 inch board designed to fit inside 29mm air-frame coupler tube.
4506 <title>TeleMetrum v1 Specifications</title>
4510 Recording altimeter for model rocketry.
4515 Supports dual deployment (can fire 2 ejection charges).
4520 70cm, 10mW ham-band transceiver for telemetry down-link.
4525 Barometric pressure sensor good to 45k feet MSL.
4530 1-axis high-g accelerometer for motor characterization, capable of
4531 +/- 50g using default part.
4536 On-board, integrated GPS receiver with 5Hz update rate capability.
4541 On-board 1 megabyte non-volatile memory for flight data storage.
4546 USB interface for battery charging, configuration, and data recovery.
4551 Fully integrated support for Li-Po rechargeable batteries.
4556 Uses Li-Po to fire e-matches, can be modified to support
4557 optional separate pyro battery if needed.
4562 2.75 x 1 inch board designed to fit inside 29mm air-frame coupler tube.
4569 TeleMini v2.0 Specifications
4574 Recording altimeter for model rocketry.
4579 Supports dual deployment (can fire 2 ejection charges).
4584 70cm, 10mW ham-band transceiver for telemetry down-link.
4589 Barometric pressure sensor good to 100k feet MSL.
4594 On-board 1 megabyte non-volatile memory for flight data storage.
4599 USB interface for configuration, and data recovery.
4604 Support for Li-Po rechargeable batteries (using an
4605 external charger), or any 3.7-15V external battery.
4610 Uses Li-Po to fire e-matches, can be modified to support
4611 optional separate pyro battery if needed.
4616 1.5 x .8 inch board designed to fit inside 24mm air-frame coupler tube.
4623 TeleMini v1.0 Specifications
4628 Recording altimeter for model rocketry.
4633 Supports dual deployment (can fire 2 ejection charges).
4638 70cm, 10mW ham-band transceiver for telemetry down-link.
4643 Barometric pressure sensor good to 45k feet MSL.
4648 On-board 5 kilobyte non-volatile memory for flight data storage.
4653 RF interface for configuration, and data recovery.
4658 Support for Li-Po rechargeable batteries, using an external charger.
4663 Uses Li-Po to fire e-matches, can be modified to support
4664 optional separate pyro battery if needed.
4669 1.5 x .5 inch board designed to fit inside 18mm air-frame coupler tube.
4676 EasyMini Specifications
4681 Recording altimeter for model rocketry.
4686 Supports dual deployment (can fire 2 ejection charges).
4691 Barometric pressure sensor good to 100k feet MSL.
4696 On-board 1 megabyte non-volatile memory for flight data storage.
4701 USB interface for configuration, and data recovery.
4706 Support for Li-Po rechargeable batteries (using an
4707 external charger), or any 3.7-15V external battery.
4712 Uses Li-Po to fire e-matches, can be modified to support
4713 optional separate pyro battery if needed.
4718 1.5 x .8 inch board designed to fit inside 24mm air-frame coupler tube.
4727 <emphasis>TeleMetrum seems to shut off when disconnected from the
4728 computer.</emphasis> <?linebreak?>
4729 Make sure the battery is adequately charged. Remember the
4730 unit will pull more power than the USB port can deliver before the
4731 GPS enters “locked” mode. The battery charges best when TeleMetrum
4735 <emphasis>It's impossible to stop the TeleDongle when it's in “p” mode, I have
4736 to unplug the USB cable? </emphasis><?linebreak?>
4737 Make sure you have tried to “escape out” of
4738 this mode. If this doesn't work the reboot procedure for the
4739 TeleDongle *is* to simply unplug it. 'cu' however will retain it's
4740 outgoing buffer IF your “escape out” ('~~') does not work.
4741 At this point using either 'ao-view' (or possibly
4742 'cutemon') instead of 'cu' will 'clear' the issue and allow renewed
4746 <emphasis>The amber LED (on the TeleMetrum) lights up when both
4747 battery and USB are connected. Does this mean it's charging?
4748 </emphasis><?linebreak?>
4749 Yes, the yellow LED indicates the charging at the 'regular' rate.
4750 If the led is out but the unit is still plugged into a USB port,
4751 then the battery is being charged at a 'trickle' rate.
4754 <emphasis>There are no “dit-dah-dah-dit” sound or lights like the manual
4755 mentions?</emphasis><?linebreak?>
4756 That's the “pad” mode. Weak batteries might be the problem.
4757 It is also possible that the flight computer is horizontal and the
4759 is instead a “dit-dit” meaning 'idle'. For TeleMini, it's possible that
4760 it received a command packet which would have left it in “pad” mode.
4763 <emphasis>How do I save flight data?</emphasis><?linebreak?>
4764 Live telemetry is written to file(s) whenever AltosUI is connected
4765 to the TeleDongle. The file area defaults to ~/TeleMetrum
4766 but is easily changed using the menus in AltosUI. The files that
4767 are written end in '.telem'. The after-flight
4768 data-dumped files will end in .eeprom and represent continuous data
4769 unlike the .telem files that are subject to losses
4770 along the RF data path.
4771 See the above instructions on what and how to save the eeprom stored
4772 data after physically retrieving your altimeter. Make sure to save
4773 the on-board data after each flight; while the TeleMetrum can store
4774 multiple flights, you never know when you'll lose the altimeter...
4778 <title>Notes for Older Software</title>
4781 Before AltosUI was written, using Altus Metrum devices required
4782 some finesse with the Linux command line. There was a limited
4783 GUI tool, ao-view, which provided functionality similar to the
4784 Monitor Flight window in AltosUI, but everything else was a
4785 fairly 80's experience. This appendix includes documentation for
4786 using that software.
4790 Both TeleMetrum and TeleDongle can be directly communicated
4791 with using USB ports. The first thing you should try after getting
4792 both units plugged into to your computer's USB port(s) is to run
4793 'ao-list' from a terminal-window to see what port-device-name each
4794 device has been assigned by the operating system.
4795 You will need this information to access the devices via their
4796 respective on-board firmware and data using other command line
4797 programs in the AltOS software suite.
4800 TeleMini can be communicated with through a TeleDongle device
4801 over the radio link. When first booted, TeleMini listens for a
4802 TeleDongle device and if it receives a packet, it goes into
4803 'idle' mode. Otherwise, it goes into 'pad' mode and waits to be
4804 launched. The easiest way to get it talking is to start the
4805 communication link on the TeleDongle and the power up the
4809 To access the device's firmware for configuration you need a terminal
4810 program such as you would use to talk to a modem. The software
4811 authors prefer using the program 'cu' which comes from the UUCP package
4812 on most Unix-like systems such as Linux. An example command line for
4813 cu might be 'cu -l /dev/ttyACM0', substituting the correct number
4814 indicated from running the
4815 ao-list program. Another reasonable terminal program for Linux is
4816 'cutecom'. The default 'escape'
4817 character used by CU (i.e. the character you use to
4818 issue commands to cu itself instead of sending the command as input
4819 to the connected device) is a '~'. You will need this for use in
4820 only two different ways during normal operations. First is to exit
4821 the program by sending a '~.' which is called a 'escape-disconnect'
4822 and allows you to close-out from 'cu'. The
4823 second use will be outlined later.
4826 All of the Altus Metrum devices share the concept of a two level
4827 command set in their firmware.
4828 The first layer has several single letter commands. Once
4829 you are using 'cu' (or 'cutecom') sending (typing) a '?'
4830 returns a full list of these
4831 commands. The second level are configuration sub-commands accessed
4832 using the 'c' command, for
4833 instance typing 'c?' will give you this second level of commands
4834 (all of which require the
4835 letter 'c' to access). Please note that most configuration options
4836 are stored only in Flash memory; TeleDongle doesn't provide any storage
4837 for these options and so they'll all be lost when you unplug it.
4840 Try setting these configuration ('c' or second level menu) values. A good
4841 place to start is by setting your call sign. By default, the boards
4842 use 'N0CALL' which is cute, but not exactly legal!
4843 Spend a few minutes getting comfortable with the units, their
4844 firmware, and 'cu' (or possibly 'cutecom').
4845 For instance, try to send
4846 (type) a 'c r 2' and verify the channel change by sending a 'c s'.
4847 Verify you can connect and disconnect from the units while in your
4848 terminal program by sending the escape-disconnect mentioned above.
4851 To set the radio frequency, use the 'c R' command to specify the
4852 radio transceiver configuration parameter. This parameter is computed
4853 using the desired frequency, 'F', the radio calibration parameter, 'C' (showed by the 'c s' command) and
4854 the standard calibration reference frequency, 'S', (normally 434.550MHz):
4858 Round the result to the nearest integer value.
4859 As with all 'c' sub-commands, follow this with a 'c w' to write the
4860 change to the parameter block in the on-board flash on
4861 your altimeter board if you want the change to stay in place across reboots.
4864 To set the apogee delay, use the 'c d' command.
4865 As with all 'c' sub-commands, follow this with a 'c w' to write the
4866 change to the parameter block in the on-board DataFlash chip.
4869 To set the main deployment altitude, use the 'c m' command.
4870 As with all 'c' sub-commands, follow this with a 'c w' to write the
4871 change to the parameter block in the on-board DataFlash chip.
4874 To calibrate the radio frequency, connect the UHF antenna port to a
4875 frequency counter, set the board to 434.550MHz, and use the 'C'
4876 command to generate a CW carrier. Wait for the transmitter temperature
4877 to stabilize and the frequency to settle down.
4878 Then, divide 434.550 MHz by the
4879 measured frequency and multiply by the current radio cal value show
4880 in the 'c s' command. For an unprogrammed board, the default value
4881 is 1186611 for cc1111 based products and 7119667 for cc1120
4882 based products. Take the resulting integer and program it using the 'c f'
4883 command. Testing with the 'C' command again should show a carrier
4884 within a few tens of Hertz of the intended frequency.
4885 As with all 'c' sub-commands, follow this with a 'c w' to write the
4886 change to the configuration memory.
4889 Note that the 'reboot' command, which is very useful on the altimeters,
4890 will likely just cause problems with the dongle. The *correct* way
4891 to reset the dongle is just to unplug and re-plug it.
4894 A fun thing to do at the launch site and something you can do while
4895 learning how to use these units is to play with the radio link access
4896 between an altimeter and the TeleDongle. Be aware that you *must* create
4897 some physical separation between the devices, otherwise the link will
4898 not function due to signal overload in the receivers in each device.
4901 Now might be a good time to take a break and read the rest of this
4902 manual, particularly about the two “modes” that the altimeters
4903 can be placed in. TeleMetrum uses the position of the device when booting
4904 up will determine whether the unit is in “pad” or “idle” mode. TeleMini
4905 enters “idle” mode when it receives a command packet within the first 5 seconds
4906 of being powered up, otherwise it enters “pad” mode.
4909 You can access an altimeter in idle mode from the TeleDongle's USB
4910 connection using the radio link
4911 by issuing a 'p' command to the TeleDongle. Practice connecting and
4912 disconnecting ('~~' while using 'cu') from the altimeter. If
4913 you cannot escape out of the “p” command, (by using a '~~' when in
4914 CU) then it is likely that your kernel has issues. Try a newer version.
4917 Using this radio link allows you to configure the altimeter, test
4918 fire e-matches and igniters from the flight line, check pyro-match
4919 continuity and so forth. You can leave the unit turned on while it
4920 is in 'idle mode' and then place the
4921 rocket vertically on the launch pad, walk away and then issue a
4922 reboot command. The altimeter will reboot and start sending data
4923 having changed to the “pad” mode. If the TeleDongle is not receiving
4924 this data, you can disconnect 'cu' from the TeleDongle using the
4925 procedures mentioned above and THEN connect to the TeleDongle from
4926 inside 'ao-view'. If this doesn't work, disconnect from the
4927 TeleDongle, unplug it, and try again after plugging it back in.
4930 In order to reduce the chance of accidental firing of pyrotechnic
4931 charges, the command to fire a charge is intentionally somewhat
4932 difficult to type, and the built-in help is slightly cryptic to
4933 prevent accidental echoing of characters from the help text back at
4934 the board from firing a charge. The command to fire the apogee
4935 drogue charge is 'i DoIt drogue' and the command to fire the main
4936 charge is 'i DoIt main'.
4939 On TeleMetrum, the GPS will eventually find enough satellites, lock in on them,
4940 and 'ao-view' will both auditorily announce and visually indicate
4942 Now you can launch knowing that you have a good data path and
4943 good satellite lock for flight data and recovery. Remember
4944 you MUST tell ao-view to connect to the TeleDongle explicitly in
4945 order for ao-view to be able to receive data.
4948 The altimeters provide RDF (radio direction finding) tones on
4949 the pad, during descent and after landing. These can be used to
4950 locate the rocket using a directional antenna; the signal
4951 strength providing an indication of the direction from receiver to rocket.
4954 TeleMetrum also provides GPS tracking data, which can further simplify
4955 locating the rocket once it has landed. (The last good GPS data
4956 received before touch-down will be on the data screen of 'ao-view'.)
4959 Once you have recovered the rocket you can download the eeprom
4960 contents using either 'ao-dumplog' (or possibly 'ao-eeprom'), over
4961 either a USB cable or over the radio link using TeleDongle.
4962 And by following the man page for 'ao-postflight' you can create
4963 various data output reports, graphs, and even KML data to see the
4964 flight trajectory in Google-earth. (Moving the viewing angle making
4965 sure to connect the yellow lines while in Google-earth is the proper
4969 As for ao-view.... some things are in the menu but don't do anything
4970 very useful. The developers have stopped working on ao-view to focus
4971 on a new, cross-platform ground station program. So ao-view may or
4972 may not be updated in the future. Mostly you just use
4973 the Log and Device menus. It has a wonderful display of the incoming
4974 flight data and I am sure you will enjoy what it has to say to you
4975 once you enable the voice output!
4979 <title>Drill Templates</title>
4981 These images, when printed, provide precise templates for the
4982 mounting holes in Altus Metrum flight computers
4985 <title>TeleMega template</title>
4987 TeleMega has overall dimensions of 1.250 x 3.250 inches, and
4988 the mounting holes are sized for use with 4-40 or M3 screws.
4991 <mediaobject id="TeleMegaTemplate">
4993 <imagedata format="SVG" fileref="telemega-outline.svg"/>
4999 <title>TeleMetrum template</title>
5001 TeleMetrum has overall dimensions of 1.000 x 2.750 inches, and the
5002 mounting holes are sized for use with 4-40 or M3 screws.
5005 <mediaobject id="TeleMetrumTemplate">
5007 <imagedata format="SVG" fileref="telemetrum.svg"/>
5013 <title>TeleMini v2/EasyMini template</title>
5015 TeleMini v2 and EasyMini have overall dimensions of 0.800 x 1.500 inches, and the
5016 mounting holes are sized for use with 4-40 or M3 screws.
5019 <mediaobject id="MiniTemplate">
5021 <imagedata format="SVG" fileref="easymini-outline.svg"/>
5027 <title>TeleMini v1 template</title>
5029 TeleMini has overall dimensions of 0.500 x 1.500 inches, and the
5030 mounting holes are sized for use with 2-56 or M2 screws.
5033 <mediaobject id="TeleMiniTemplate">
5035 <imagedata format="SVG" fileref="telemini.svg"/>
5042 <title>Calibration</title>
5044 There are only two calibrations required for TeleMetrum and
5045 TeleMega, and only one for TeleDongle, TeleMini and EasyMini.
5046 All boards are shipped from the factory pre-calibrated, but
5047 the procedures are documented here in case they are ever
5048 needed. Re-calibration is not supported by AltosUI, you must
5049 connect to the board with a serial terminal program and
5050 interact directly with the on-board command interpreter to
5054 <title>Radio Frequency</title>
5056 The radio frequency is synthesized from a clock based on the
5057 crystal on the board. The actual frequency of this oscillator
5058 must be measured to generate a calibration constant. While our
5060 bandwidth is wide enough to allow boards to communicate even when
5061 their oscillators are not on exactly the same frequency, performance
5062 is best when they are closely matched.
5063 Radio frequency calibration requires a calibrated frequency counter.
5064 Fortunately, once set, the variation in frequency due to aging and
5065 temperature changes is small enough that re-calibration by customers
5066 should generally not be required.
5069 To calibrate the radio frequency, connect the UHF antenna
5070 port to a frequency counter, set the board to 434.550MHz,
5071 and use the 'C' command in the on-board command interpreter
5072 to generate a CW carrier. For USB-enabled boards, this is
5073 best done over USB. For TeleMini v1, note that the only way
5074 to escape the 'C' command is via power cycle since the board
5075 will no longer be listening for commands once it starts
5076 generating a CW carrier.
5079 Wait for the transmitter temperature to stabilize and the frequency
5080 to settle down. Then, divide 434.550 MHz by the
5081 measured frequency and multiply by the current radio cal value show
5082 in the 'c s' command. For an unprogrammed board, the default value
5083 is 1186611. Take the resulting integer and program it using the 'c f'
5084 command. Testing with the 'C' command again should show a carrier
5085 within a few tens of Hertz of the intended frequency.
5086 As with all 'c' sub-commands, follow this with a 'c w' to write the
5087 change to the parameter block in the on-board storage chip.
5090 Note that any time you re-do the radio frequency calibration, the
5091 radio frequency is reset to the default 434.550 Mhz. If you want
5092 to use another frequency, you will have to set that again after
5093 calibration is completed.
5097 <title>TeleMetrum and TeleMega Accelerometers</title>
5099 While barometric sensors are factory-calibrated,
5100 accelerometers are not, and so each must be calibrated once
5101 installed in a flight computer. Explicitly calibrating the
5102 accelerometers also allows us to load any compatible device.
5103 We perform a two-point calibration using gravity.
5106 To calibrate the acceleration sensor, use the 'c a 0' command. You
5107 will be prompted to orient the board vertically with the UHF antenna
5108 up and press a key, then to orient the board vertically with the
5109 UHF antenna down and press a key. Note that the accuracy of this
5110 calibration depends primarily on how perfectly vertical and still
5111 the board is held during the cal process. As with all 'c'
5112 sub-commands, follow this with a 'c w' to write the
5113 change to the parameter block in the on-board DataFlash chip.
5116 The +1g and -1g calibration points are included in each telemetry
5117 frame and are part of the header stored in onboard flash to be
5118 downloaded after flight. We always store and return raw ADC
5119 samples for each sensor... so nothing is permanently “lost” or
5120 “damaged” if the calibration is poor.
5123 In the unlikely event an accel cal goes badly, it is possible
5124 that TeleMetrum or TeleMega may always come up in 'pad mode'
5125 and as such not be listening to either the USB or radio link.
5126 If that happens, there is a special hook in the firmware to
5127 force the board back in to 'idle mode' so you can re-do the
5128 cal. To use this hook, you just need to ground the SPI clock
5129 pin at power-on. This pin is available as pin 2 on the 8-pin
5130 companion connector, and pin 1 is ground. So either
5131 carefully install a fine-gauge wire jumper between the two
5132 pins closest to the index hole end of the 8-pin connector, or
5133 plug in the programming cable to the 8-pin connector and use
5134 a small screwdriver or similar to short the two pins closest
5135 to the index post on the 4-pin end of the programming cable,
5136 and power up the board. It should come up in 'idle mode'
5137 (two beeps), allowing a re-cal.
5142 <title>Release Notes</title>
5144 <title>Version 1.3.2</title>
5146 xmlns:xi="http://www.w3.org/2001/XInclude"
5147 href="release-notes-1.3.2.xsl"
5148 xpointer="xpointer(/article/*)"/>
5151 <title>Version 1.3.1</title>
5153 xmlns:xi="http://www.w3.org/2001/XInclude"
5154 href="release-notes-1.3.1.xsl"
5155 xpointer="xpointer(/article/*)"/>
5158 <title>Version 1.3</title>
5160 xmlns:xi="http://www.w3.org/2001/XInclude"
5161 href="release-notes-1.3.xsl"
5162 xpointer="xpointer(/article/*)"/>
5165 <title>Version 1.2.1</title>
5167 xmlns:xi="http://www.w3.org/2001/XInclude"
5168 href="release-notes-1.2.1.xsl"
5169 xpointer="xpointer(/article/*)"/>
5172 <title>Version 1.2</title>
5174 xmlns:xi="http://www.w3.org/2001/XInclude"
5175 href="release-notes-1.2.xsl"
5176 xpointer="xpointer(/article/*)"/>
5179 <title>Version 1.1.1</title>
5181 xmlns:xi="http://www.w3.org/2001/XInclude"
5182 href="release-notes-1.1.1.xsl"
5183 xpointer="xpointer(/article/*)"/>
5186 <title>Version 1.1</title>
5188 xmlns:xi="http://www.w3.org/2001/XInclude"
5189 href="release-notes-1.1.xsl"
5190 xpointer="xpointer(/article/*)"/>
5193 <title>Version 1.0.1</title>
5195 xmlns:xi="http://www.w3.org/2001/XInclude"
5196 href="release-notes-1.0.1.xsl"
5197 xpointer="xpointer(/article/*)"/>
5200 <title>Version 0.9.2</title>
5202 xmlns:xi="http://www.w3.org/2001/XInclude"
5203 href="release-notes-0.9.2.xsl"
5204 xpointer="xpointer(/article/*)"/>
5207 <title>Version 0.9</title>
5209 xmlns:xi="http://www.w3.org/2001/XInclude"
5210 href="release-notes-0.9.xsl"
5211 xpointer="xpointer(/article/*)"/>
5214 <title>Version 0.8</title>
5216 xmlns:xi="http://www.w3.org/2001/XInclude"
5217 href="release-notes-0.8.xsl"
5218 xpointer="xpointer(/article/*)"/>
5221 <title>Version 0.7.1</title>
5223 xmlns:xi="http://www.w3.org/2001/XInclude"
5224 href="release-notes-0.7.1.xsl"
5225 xpointer="xpointer(/article/*)"/>
5230 <!-- LocalWords: Altusmetrum