1 altos (1.0.2) unstable; urgency=low
4 * update release process docs
5 * update changelogs for Debian build
6 * include 1.0.1 release notes in docs, closes: #642705
7 * add run-time dependency on libjfreechart-java
10 * altos: Delay reboot by a second to avoid re-entering idle mode
11 * Bump to version 1.0.2
12 * altos: TM: Don't turn on packet slave mode until idle/invalid state
13 * doc: Add 1.0.2 release notes
15 -- Bdale Garbee <bdale@gag.com> Wed, 28 Sep 2011 01:58:27 -0600
17 altos (1.0.1) unstable; urgency=low
20 * use multimaint-merge to make Debian changelogs less ugly
21 * update TeleMini turnon script now that we've made a stable firmware release
22 * moving git-buildpackage config into .git/ since it is fairly specific to
23 Bdale's build environment, and doesn't need to be in the source package
24 * get ready for a 1.0.1 release
25 * update changelogs for Debian build
26 * fix telemini firmware path name
27 * ignore generated log file
28 * roll release notes version from 1.0 to 1.0.1
29 * roll back packaging changelog for rebuild
32 * altos: Clear callsign on initial config load
34 -- Bdale Garbee <bdale@gag.com> Fri, 26 Aug 2011 10:39:29 -0600
36 altos (1.0) unstable; urgency=low
39 * altos: Lost change that reported flight 0 when log memory was full
40 * altosui: Ancient log files used 'apogee' for 'coast' state
41 * altosui: Add 'On-board Data Logging' indicator to pad tab
44 * update changelogs for Debian build
45 * update changelogs for Debian build
48 * altosui: remove debug printf in pad pane
49 * altosui: Disable 'max flight log' config when there are stored flights
50 * altos: Merge common config code in ao_config.c
51 * Bump version to 0.9.7
52 * altos/altosui: Add ability to disable telemetry/rdf completely
53 * altosui: Clean up command line processing. Add --graph
54 * altos-fat/windows: Check and install Java 1.6 as needed
55 * altosui/windows: Fix a bunch of windows compiler warnings.
56 * altosui: Attempt to make both 32- and 64-bit windows DLLs
57 * doc: Add note about telemetry disable mode to 1.0 release notes
58 * doc: Add Installation Recommendations chapter
59 * altosui: Add a few simple unit conversions
60 * altosui: Capture date/time/serial/flight in AltosFlightStats
61 * altosui: Add date/time/serial/flight to flight stats tab
62 * altosui: Show filename in AltosGraph window
63 * altosui: Add --summary option to dump flight stats to stdout
64 * altosui: Make monitor-idle display correct 'On-board data logging' status
65 * altosui: Can't configure flight log max on TeleMini
66 * altosui: fix 'magic' string to signal end of config data
67 * altosui: Only 'show' config dialog once
68 * altosui: Reset all config data on 'reset' command
69 * altosui: Update mac os X library
70 * libaltos: fix Mac OS X function signatures
71 * altosui: add tool-tips to the button box.
74 * turn off auto-tagging during Debian build
75 * update changelogs for Debian build
76 * rewind changelog to 0.9.6.0 for rebuild
77 * update changelogs for Debian build
80 * altosui: Use system look&feel
81 * Remove stale tools (ao-dumplog, ao-postflight, ao-view)
82 * altosui: Add tool-tips to config dialogs
83 * altosui: Try to get dialogs to look a little better
87 * roll changelog back in prep for another test build
88 * update changelogs for Debian build
89 * add pkg-config to the build deps
90 * prepare for another rebuild
91 * update changelogs for Debian build
94 * altosui: Don't trust companion telemetry record 'channels' count
95 * altosui: Make flight monitor font size configurable
96 * altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
99 * doc tweaks through chap 3
102 * doc: Spelling corrections in altusmetrum.xsl
103 * doc: Document pad-mode 'on-board data logging' indicator
109 * doc: Describe packet command mode a bit better.
110 * doc: Move Packet Command Mode section to System Operations chapter
117 * doc: use 'radio link' to refer to packet command mode
123 * doc: Move updating device firmware section to separate chapter
124 * doc: Updating Firmware is now a separate chapter
130 * doc: Move the remaining command-mode descriptions to the appendix
136 * doc: Describe max flight log, ignite mode and pad orientation
137 * doc: Remove duplicate documentation about max flight log
142 * don't deliver sources.list fragment in official Debian packages
143 * changes in preparation for upload to Debian
144 * ao-view is no longer included in the altos package, so have the
145 old-style Debian menu entry point to altosui instead
146 * rewind packaging changelog to last tagged version
147 * update desktop file for consistency with package section
148 * we need a main category in the desktop file
149 * really, I mean it, no longer deliver the sources.list fragment
150 * add a postinst to remove sources.list.d fragment delivered by old
151 private versions of this package, no longer needed once we have
154 -- Bdale Garbee <bdale@gag.com> Thu, 25 Aug 2011 02:22:21 -0600
156 altos (0.9.6.0) unstable; urgency=low
159 * altos: Correct flight log max on Tm to 5k
160 * altosui: Change button to 'Configure Altimeter'
161 * altos: Remove pad_orientation functions from non-accel devices
162 * altos: Add ability to set arbitrary radio frequency
163 * altosui: Add dialogs to configure 'common' frequencies
164 * altosui: Convert from channels to frequencies
165 * Set version to 0.9.5.0
166 * altosui: altimeter is not spelled altimter
167 * altosui: Pull out BlueTooth support
168 * altos: minor type in comment about accel correction
169 * altosui: Must set radio calibration before radio setting
170 * altosui: A few misc cleanups.
171 * altosui: Have single radio_to_frequency function
172 * altosui: Save frequency after setting it in AltosFlightUI
173 * altosui: Show AltosFrequency in scan results
174 * altosui: Remove debugging printfs from AltosSerial
175 * altosui: Flush radio setting to serial device
176 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
177 * altosui: Reading serial from swing thread only bad if remote
178 * altosui: Make set of telemetries to use while scanning configurable
179 * altosui: Add close button to 'fire' dialog
180 * altos: Switch telemini from v0.1 to v1.0
181 * altosui: Don't export product defs from libaltos
182 * altosui: Ensure serial code tracks reply nesting correctly
183 * altosui: Ship TeleMini v1.0 firmware with fat blobs
184 * Altosui: Add flight statistics tab to graph window
185 * altosui: Add a 'Graph Flight' button to the 'landed' tab
186 * altosui: Prune telemetry file graphs to just the flight
187 * altosui: Plot reasonable data from Tm files
188 * altosui: Move launch-sites.txt file to altusmetrum.org
189 * Bump version to 0.9.6.0
190 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
191 * doc: Document Ignite Mode and Pad Orientation configuration options
192 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
193 * doc: Add telemetry docs to debian/linux/mac/windows packages
194 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
195 * doc: Add 1.0 release notes.
196 * altos: Pull igniter pins low as soon as possible at boot time
197 * altos: Apply igniter boot pulse-width reduction to telemini
198 * altos: remove monitor disable stubs from altimeter code
199 * ao-tools: ao-list was crashing with more than 3 devices connected
200 * libaltos: Mis-allocated device list in libaltos
201 * altos: shrink text space from ao_config.c
202 * altos: re-write a bit of GPS parsing code to reduce size
203 * altos/altosui: Report log format in the version command
204 * altos: Don't try to use non-basestations for remote eeprom download
205 * altos: Add SPI-based companion board support
206 * altos: Put SPI in slower mode when talking to companion board
207 * altos: Make sure companion task exits cleanly when done
208 * altos: add the 'L' command to show the status of a linked companion board
209 * altos: Check for companion init packet validity was busted
210 * altosui: Add companion support to the flight UI and CSV conversion
211 * altos: Send SPI message at flight state changes
212 * altos: Send serial/flight to companion board
213 * altos: wait 10s for companion to boot
214 * altosui: Clean up eeprom parsing a bit
215 * altosui: Add support for TeleScience eeprom download
216 * altosui: Devices with log-format can also delete flights
217 * altosui: Eliminate inter-chunk flush_input calls
218 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
219 * altos: Correct AO_CONFIG_MINOR from 6 to 7
220 * altos: Reset radio channel to zero when using radio setting
221 * altos: use raw height while waiting for landing
222 * altosui: don't set channel when using radio setting
223 * altosui: Respect storage limits in flight log max config
225 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
227 altos (0.9.4.5) unstable; urgency=low
230 * altosui: Mark empty eeprom records 'invalid', don't generate exception
231 * altosui: Always read whole eeprom block, even at end of flight
232 * altosui: Display eeprom parsing errors to user
233 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
236 * src/ao_cmd: Shave off bytes from doc strings
239 * altos: Oops. Lost a couple of commands when merging the doc patch
240 * altosui: Missed jcommon.jar in the Mac OS install image
241 * Bump published version number to 0.9.1
242 * aoview: remove -s option.
245 * ao_intflash: Use internal flash for storage
248 * altos: Make serial, usb, beeper and accelerometer optional components
249 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
250 * altos/test: Add baro-only flight test program
251 * altos: Start with packet slave running. Turn off in pad mode.
252 * altos: Add TeleMini v1.0
255 * ao_intflash: Avoid overwriting code
258 * altos: Switch LED usage for TeleMini around
259 * altos: Switch pins around for TeleMini
260 * bringup: Add script for telemini
261 * ao-load: Make usb descriptor rewriting optional
262 * altos: oops -- altitude reporting wasn't pausing between signals
263 * altos: Internal flash ops block when running from flash
266 * ignore new flight test file
269 * altos: Add tiny logging for TeleMini/TeleNano
270 * altos: Add kalman filters for baro-only boards
271 * altos: Tiny logging fixes. Scan at start, stop when land or full.
272 * altos: Add TeleNano support
275 * fix up script to work and have reasonable texts
278 * altos: Fix mini/nano default log size to available flash space
279 * altos/test: Add scripts to run lots of flights through the code
280 * altos: Write height values to log for nano/mini
281 * altos: Baro-only boards must not detect launch on accel or speed data
282 * altosui: Add software version to Configure AltosUI dialog
283 * altos: Don't init packet slave on TD. Make slave start optional
284 * altos: Configure packet size from send/recv parameters.
285 * altos: Make telemetry interval more consistent
286 * altos: Split out tiny telemetry from full telemetry
287 * altos: Split telenano main from telemini
288 * altos: The kalman code requires a constant sample rate
289 * altos: New telemetry report format (version 4). Supports tiny telemetry.
290 * altos: Add .sdcdbrc file for teledongle
291 * altos: Add nickle kalman implementation.
292 * altos: Switch telemetrum over to kalman filter
293 * altos: Compute a 'trust' value for the barometer
294 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
295 * altos: Clean up some debug stuff in ao_flight.c
296 * altos: Add ao_flight_debug code
297 * altos: Missing parens and some bad arithmetic in the kalman code
298 * altos: Fix up flight code testing
299 * altos: Restore sensible kalman values
300 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
301 * altos: Exit flight test at landing. Allow description in test flight list
302 * Add ao_kalman.h to .gitignore
303 * Add description to test flights
304 * altosui: Add support for telemetry version 4
305 * altosui: Add telemetry format menu and preferences
306 * altosui: Remove a bunch of debug printfs from the eeprom manager code
307 * altosui: Add support for downloading TeleMini/TeleNano flight logs
308 * altosui: Remove extra AltosEepromBlock layer
309 * altosui: swing hide/show methods are deprecated
310 * altosui: Allow TM config connection to be canceled.
311 * altos: Variable log rate in full logging code too
312 * altos: full logging must flush pending data before checking state
313 * altosui: Off-by-one error in telemetry format configuration UI
314 * altosui: Allow radio channel to be configured over the radio link
315 * altosui: Tell serial device which frame to use for timeout dialogs
316 * altosui: Handle serial calls from swing thread
317 * altos: Split up flight code into separate flight/sample/kalman bits
318 * altos: Create custom nano flight code
319 * altosui: Clean up packet link connecting dialog
320 * altosui: Make flight log downloading handle 'Connecting...' dialog
321 * altosui: Make deployment testing handle Connecting... dialog
322 * altosui: Display exception messages from swing thread
323 * altosui: Don't display 0000-00-00 for missing flight log dates
324 * altos: ao_sample_preflight was exiting preflight mode immediately
325 * altos: Run RDF beacon after apogee instead of waiting for landing
326 * altos: Enable logging during nano flights
327 * altosui: Parse and export Max flight log value
328 * altosui: Only plot acceleration when present in data file
329 * altos: Reflect ao_flight split in ao_flight_test dependencies
330 * altos: Baro useful ceiling is MSL, not AGL
331 * altos: Make ao_flight_test show true height but report saturated height
332 * altos: Add initial TeleBT code
333 * altos: Add P2SEL_*_MASK defines to cc1111.h
334 * altos: expose set of available stdio values
335 * altos: Provide for a pre-filter on commands
336 * altos: Allow any stdio to be used with packet forwarding
337 * altos: Remove serial monitor command
338 * altos: Make ao_serial_drain public
339 * altos: Clean up usage of serial port for stdio
340 * altos: Clean up serial initialization
341 * altos: Make cmd echo per-connection instead of global
342 * altos: Clean up BT serial communcations
343 * altosui: Add missing AltosTelemetryMap.java file
344 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
345 * altosui: Add TeleBT USB device support
346 * altosui: Add low-level Bluetooth APIs
347 * altos/altosui: Log averaged baro sensor data in Tm/Tn
348 * altosui: oops - lost state changes when downloading eeprom data.
349 * altos: Write a few pre-launch samples for Tm/Tn devices
350 * altosui: Add primitive bluetooth device manager UI.
351 * altosui: Create abstract AltosDevice class
352 * altosui: Make AltosBTDevice implement AltosDevice interface
353 * altosui: Make bluetooth dialog modal
354 * altosui: Use persistent list of bluetooth devices for device dialogs
355 * altos: Add delays to bt startup sequence
356 * altosui: Wait two seconds after bluetooth connect XXX
357 * altos: Solidify BT connections
358 * altos: Simplify BT communications
359 * altos: Remove bt debug command
360 * altos: remove BT logging code
361 * altosui: Eliminate ao_cmd_filter hook
362 * altosui: Make flight data download work through TeleBT
363 * altos: add telebt-v0.0 Makefile
364 * altosui: Separate out flash debug code to separate thread
365 * altosui: Fix TeleBT name in flight monitor title
366 * altosui: Display reader name (usually the device) when an I/O error occurs
367 * altosui: Move AltosIgniteUI device open out of Swing thread
368 * altosui: Fix BT manage dialog so that the device lists resize
369 * altos: Add preliminary telebt v0.1 defines
372 * first cut at a telebt turn on script
375 * altos: Add telebt-v0.1 to Makefile
376 * altos: Use USART configuration 1 with flow control for TBT
377 * altos: Fix BT link status pin for real TBT hardware
378 * altos: pull TBT v0.1 ser_reset line low
379 * altos: Add beeper to TBT v0.1
380 * altos: Debugging TBT issues -- check pin configuration after boot
381 * altos: Initialize beeper for telebt
382 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
383 * altos: clear CPU port 1 interrupt flag when handled
384 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
385 * Switch version to 0.9.4
386 * altosui: Handle old TeleDongle receiving kalman telemetry packets
387 * altos: Rename telemetry to telemetry_orig
388 * altos: Add arbitrary telemetry packet monitoring
389 * altos: Add checksum to TELEM output lines
390 * altos: Start adding new telemetry frame definitions
391 * altos: ao_radio_recv needs byte count *including* rssi and status
392 * altosui: Support raw telemetry from TeleDongle
393 * doc: Add telemetry format description
394 * doc: Complete initial telemetry description
395 * doc: Fix a few minor telemetry doc mistakes
396 * Version strings must be < 8 bytes long
397 * altos: teledongle does not need ao_packet_slave.c
398 * altos: Shrink const space in ao_config
399 * altos: Add sat info to GPS report command
400 * altos: Shrink help text
401 * altos: Add split telemetry code
402 * altos: Complete new telemetry switchover
403 * altosui: Parse remaining standard telemetry packets
404 * doc: Chang Config and Location packets
405 * altos: Adapt to changes in telemetry Configuration packet
406 * doc: Add section about TeleDongle USB line format
407 * altosui: Elide nul bytes at end of telemetry string values
408 * altosui: Elide missing values from graphs
409 * altosui: Add main/drogue voltages to default graph
410 * altosui: Remove debug printf.
411 * altosui: Compress telemetry records marked with the same time
412 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
413 * altos: Shrink ao_config_callsign_set
414 * altos: Shrink ao_add_task by rolling up a memset loop
415 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
416 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
417 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
418 * altos: Switch ao_report.c __xdata to __pdata
419 * altos: Switch ao_rssi.c __xdata to __pdata
420 * altos: Switch ao_sample.c __xdata to __pdata
421 * altos: Switch ao_serial.c __xdata to __pdata
422 * altos: Switch ao_stdio.c __data to __pdata
423 * altos: Switch ao_telemetry.c __xdata to __pdata
424 * altos: Switch ao_usb.c __xdata to __pdata
425 * altos: Switch const for __code in struct ao_cmds
426 * altos: switch ao_cmd __xdata to __pdata
427 * altos: Switch ao_config.c __xdata to __pdata
428 * altos: Switch ao_dbg.c __xdata to __pdata
429 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
430 * altos: Switch flash drivers __xdata to __pdata
431 * altos: Switch Tm and Tn to common telemetry code
432 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
433 * altos: Ensure low-rate telem packets interleave with sensor telem packets
434 * altos: product defines are always in ao_product.h
435 * altosui: Build device constants into .java code
436 * altosui: Don't show missing igniter and gps values
437 * altos: new versions of sdcc require __ prefixes for custom keywords
438 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
439 * altosui: Start adding support for scanning radio for available devices
440 * altosui: Pop up monitor window from scan dialog
441 * altosui: Remove debugging printf from AltosLog
442 * altosui: Configuration telemetry record includes flight number
443 * altosui: Finish radio scanning UI
444 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
445 * altosui: Initialize channel and telemetry before use in ScanUI
446 * altosui: Set 'seen' bits in legacy telemetry packet reader
447 * altosui: Add map preloading GUI
448 * altosui: Try to avoid resize weirdness with map preloading
449 * altosui: Flush telemetry lines before starting to watch for scan results
450 * altosui: Display full map preload area in view.
451 * altosui: Remove a bunch of sitemap debugging printfs
454 * altosui: Make sure degree and minute values are visible (map preload)
457 * Set version to 0.9.4.4
458 * altos, altosui: Add igniter mode (dual, apogee, main)
459 * altosui: Download list of site locations for map preloading
460 * altosui: Add launch-sites.txt
461 * altosui: Add a bunch more site locations
462 * altosui: Mark preload site location with red circles (like launch)
463 * Fix NCR Pawnee location
464 * Add HARA Bragg Farms site
465 * altosui: Change continutity colors to yellow/magenta
466 * altos: Add ability to read new TELEM files to ao_flight_test
467 * altos: Average height values for landing detection
468 * altos: Reduce height averaging filter time constant
469 * altos: Require sequencing through 'main' state before landing
470 * altosui: Standard text field in flight UI needs more width (now 20)
471 * altosui: Parse accel cal from 'c s' command
472 * altosui: Simple timeouts don't work with query data
473 * altosui: Add idle monitor dialog
474 * altos/altosui: Add pad orientation configure option
477 * update version for a Bdale build for use turning on TeleMini v1.0
478 * simplify version in last changelog entry so git-dch is less confused
479 * update changelogs for Debian build
480 * update changelogs for Debian build
481 * stop doing automatic tag push during builds
482 * build depend on bluetooth dev package
483 * clean up all existing lintian warnings
484 * rewind changelog for re-build of 0.9.4.5
486 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
488 altos (0.9.1) unstable; urgency=low
491 * ao-load: fix usage message to note that '=' is required for options
492 * altos/test: Add dependencies in the Makefile for ao_flight_test
493 * altos/test: auto-configure acceleration parameters from the log file
496 * ao_radio: generalise setup of packet size
497 * src/ao_gps_skytraq: simplify parsing code
498 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
501 * tie bringup scripts to Bdale's bench TeleDongle
503 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
505 altos (0.9) unstable; urgency=low
509 * update changelogs for Debian build
510 * update turnon script to prefer TeleDongle as programmer
513 * altos: Program default flight log max value for new boards
515 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
517 altos (0.8.1+81+g4ae724f) unstable; urgency=low
519 * we need an install target to prevent parent dir make from failing
521 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
523 altos (0.8.1+79+g9a5666f) unstable; urgency=low
526 * doc: Don't delete telemetrum-outline.pdf
527 * doc: Add v0.9 features from altosui to documentation.
530 * add 0.9 revision entry, with caveat about telemetry format change
531 * freshen copyright year
534 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
535 * fat: Add docs to Linux package
536 * doc: Build with 'make all' from top level. Build with 'make fat'
538 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
540 altos (0.8.1+71+gda42f40) unstable; urgency=low
543 * doc: Add telemetrum mounting template in svg and pdf forms
546 * Re-order and re-arrange eeprom download dialog
547 * Convert EepromSelect dialog to use a GridBag
548 * Close serial port if Download/Delete dialog is cancelled.
551 * altosui: Reset eeprom download instance variables before reading
553 * altosui: Make serial debug more complete and accurate
554 * altosui: Use long input flush timeout when remote.
555 * altosui: Remove debug message when eeprom downloads are complete.
556 * altosui: Ensure serial device is closed after eeprom download
558 * altosui: Require 4 sats to light up the 'GPS locked' light.
559 * doc: inkscape tracks the filename inside the document
560 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
561 * altos: Flush log when full
564 * altos: Restructure skytraq NMEA parsing code to save some space
567 * altos: average 512 accel/baro samples at startup instead of 1000
570 * altos: Added check for an accel value above 1.5g
571 * altos: Added check for out of bounds accel
574 * altos: Add DATA_TO_XDATA to linux test harness
575 * altosui: Remove spurious colons from eeprom selection headers
578 * Rework invalid accel cal detection code
581 * altos: Auto-calibrate linux-based flight testing code
582 * altos: Ensure flight code gets first crack at new ADC data
583 * altos: Sample the accelerometer reference voltage on v1.1 boards
584 * altos: Optimize fetching of ADC data in flight code
585 * altos: Use 5V reference data to correct accelerometer measurements.
586 * doc: Remove mention of ao_wake_task
589 * update documentation to reflect reality that modifying a board for
590 separate pyro battery is not trivial
592 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
594 altos (0.8.1+42+g646e192) unstable; urgency=low
597 * altosui: Show dialog after successful delete or when no flights
598 * altosui: Ensure serial line is flushed after disabling remote link
599 * altosui: Add preference for serial debugging.
601 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
603 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
606 * altos: Add configuration parameter for maximum flight log size
607 * altos: support storage of multiple flights.
608 * altos: Speed up at45 and 25lc erase speeds
609 * altos: white space fix
610 * altos: report flight log offsets in hex block numbers instead of
612 * altos: ensure erase mark is written when erasing flights
615 * altos: Optimize Morse code generation
618 * altos: Check requested log max size against available space
619 * altos: Check for full log and complain
620 * altosui: Add configuration of flight log size
623 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
624 * altos: Remove redundant initialization of ao_interval variables
627 * altosui: Split eeprom download code apart
628 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
630 * altosui: Add support for parsing list of flights from the 'l'
632 * altosui: Add eeprom 'manage' ui to download and delete multiple
634 * altos: check for valid flight number in ao_log_delete
636 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
638 altos (0.8.1+18+g408a3e0) unstable; urgency=low
641 * altosui: move maps to subdir, fix E/W mismatch
644 * altos: clean up radio abort paths. Share radio code.
645 * altos: eliminate ao_wake_task
646 * windows: Add compatibility IDs to telemetrum.inf
647 * windows: Update NSIS installer file to use compatibility IDs
648 * altos: Split out SPI driver.
649 * altos: Add telemetrum-v1.1 directory
650 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
651 * altos: Simplify storage API
652 * altos: Require manual flight erasing.
653 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
654 * altos: Rip out 'optimization' in ao_log_scan
655 * altos: Mark end of available flight list with 'done' to make the UI
657 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
659 altos (0.8.1+4+gea95c06) unstable; urgency=low
661 * fix symlink paths in rules file
663 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
665 altos (0.8.1+2+gea7130e) unstable; urgency=low
667 * modify Debian package build to deliver one copy of background.png
670 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
672 altos (0.8.1) unstable; urgency=low
675 * moved doc dir in web content to AltOS tree
676 * fix publish target in doc/Makefile
677 * fix section layering
678 * fix an Altos vs Altus typo in the docs
679 * adding Bdale's release process document to the source tree
682 * windows: Add jfreechart.jar and jcommon.jar to windows install image
683 * Move "Releasing" to top level
684 * Add minimal release testing plan to Releasing
689 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
691 altos (0.8) unstable; urgency=low
694 * altosui: Correct windows hardware IDs for nsis installer file
695 * windows: try harder to get windows install to work
696 * windows: remove some non-existent .inf file section references
697 * windows: more .inf file hacking
698 * windows: Bump .inf file version
701 * declaring 0.8 released
702 * update changelogs for Debian build
703 * update changelogs for Debian build
704 * rewind changelog to recover from stupid build failure
706 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
708 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
711 * altosui: Split out flight monitoring to separate window
712 * altosui: Create buttons for main actions
713 * altosui: Fix channel setting at serial open time
714 * altosui: Fix more calls to AltosPreferences.channel()
715 * altosui: Create abstract interface for flight data display
716 * altosui: Add tab UI with 'pad' mode.
717 * altosui: Add ascent, descent and landed tabs
720 * Updated PKGBUILD-git.altos
723 * altos: Use grey leds when unlit - easier to see
726 * use value_font for values
727 * add --replay command line argument
728 * read preferences for --replay
729 * reduce font size for FlightInfoTable
730 * use grayled.png for off
731 * add compass bearing to voice output
732 * add compass bearing during descent
733 * add site map tab, at least for QRS launches
735 * make infotable scrollable, revert its fontsize to 14
736 * pull up maps for arbitrary locations
737 * better error behaviour if no map
740 * first cut at instructions on how to re-flash TM and TD devices based
742 * fold in content from Keith's email on the re-flashing subject
745 * altosui: Add RF calibration to TeleMetrum config dialog
748 * AltosTelemetryReader: actually open serial port
749 * AltosSiteMap: add targeting circles around landing site
752 * continuing to work on the docs
755 * altosui: Eliminate unncessary import altosui lines
756 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
757 * altosui: Replace flight status table with labels, fix resize.
758 * altosui: With --replay option, exit when replay window is closed
759 * altosui: oops, missed a file in the previous commit
760 * altosui: eliminate menu bar, moving elements to buttons.
761 * altosui: add reboot button to telemetrum configuration UI
764 * add a paragraph about forcing TM back to idle mode if an accel cal
768 * altosui: Add callsign configuration in AltosUI configuration dialog
769 * altosui: Cleanup flight UI layout
770 * altosui: Add igniter status to ascent and descent tabs
773 * altosui: tile site maps
774 * AltosSiteMapTile: autoscale to about 2 nmi per tile
775 * AltosSiteMapTile: adjust centering calculation
776 * AltosSiteMapTile: adjust scale to 1 nmi per tile
779 * altosui: Add igniter ground testing code
780 * altosui: Unify datafile selection to AltosDataChooser
781 * altosui: Clean up global AltosUI configuration settings dialog
782 * doc: Add preliminary altosui documentation
783 * doc: git ignore generated doc files
784 * doc: Document the 'Flash Image' operation.
785 * altosui: Use timeouts to recover from broken packet links.
788 * update turnon scripts to use stashed copies of stable release
792 * altosui: switch channel selector to combo box. Shorten displayed
794 * altosui: When switching log files, don't terminate log thread
795 * altosui: calling thread.interrupt with null thread doesn't work well
796 * altosui: Initialize display thread state in constructor instead of
798 * altosui: Fix channel changing in flight UI to actually work
801 * AltosSiteMap: add autoscroll and grabndrag scroll
802 * AltosSiteMapTile: seperate map and drawing layers
803 * AltosSiteMap: automatic fetching of map data
804 * AltosSiteMapTile: draw boost circle as well as landed
805 * AltosAscent/Descent: tidy up layout
806 * AltosDescent: switch elev from height to range
812 * AltosSiteMap: major refactoring
816 * altosui: change descent tab formatting to four columns
819 * AltosSiteMap: be more polite about preferred size
823 * altosui: Rewrite info table to mix with scroll pane well. Fix
827 * AltosSiteMap: better gps check, lower zoom
830 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
833 * AltosSiteMap: explain tile size better
834 * AltosSiteMap: extend map if rocket goes far away
835 * AltosSiteMap: try to get new tile construction right
836 * AltosSiteMap: thread safe tile addition
837 * AltosSiteMap: refactor tile collection
838 * AltosSiteMap: never accept 0,0 as lat/long
839 * AltosSiteMap: limit nr of tiles to 200x200
842 * altosui: When fixing eeprom gps time information, make GPS data
846 * AltosSiteMap: ensure buffer around active tile
847 * altosui: improve sitemap scrolling behaviour
848 * altosui: keep sitemap more centred on rocket
851 * altos: Add on/off modes to 'C' command
854 * Added PKGBUILDs for deps into contribs
857 * altosui: Close serial port when debug link fails
858 * altos: assume igniter worked.
861 * add a rudimentary --help for command line use
864 * doc: Add internal documentation for AltOS
867 * altosui: don't switch away from user selected tab
868 * altosui: sitemap uses rocket gps if no pad gps
871 * merge Keith's AltosUI documention into "the big book"
872 * lose the placeholder on how GPS works, as it's going to be a
875 * altos: remove unused variable from ao_igniter
876 * altos: Don't abort radio transmissions with ao_radio_abort
877 * altos: Make radio test command careful with the radio mutex.
878 * altosui: Make AltosSerial.flush_input keep reading while non-empty
879 * altosui: New AltosSerial.set_radio function sets channel/call
880 * altosui: Disable radio configation over packet link.
881 * altosui: Let people fire igniters that don't read as 'ready'
882 * altosui: Make sure packet mode is turned off when the connection
886 * docs: Document altosui "Graph Data" button
889 * Move altosui to the top level, placing libaltos inside it.
892 * doc: Document altosui "Site Map" tab
895 * Missing change to top level Makefile to build altosui
898 * fix missing section close in Site Map content
900 * manually fold in documentation work from the master branch
903 * doc: Reformat altos to use sections for each function
904 * doc: Add more authors, fix URL formatting, note that AltosUI
906 * doc: Rename telemetrum-doc as altusmetrum
910 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
912 altos (0.7.1+36+g811ced6) unstable; urgency=low
915 * remove the csv build dep, as that code will be abandoned
918 * altosui: Remove ability to graph data in .csv files
919 * altosui: Separate out jfreechart and jcommon directories
921 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
923 altos (0.7.1+32+g8103432) unstable; urgency=low
925 * add build-dep on libcsv-java
927 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
929 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
932 * make the column headers comma separated, too, so they align with the
936 * altosui: set default .csv file name in file save dialog
937 * altosui: Remember directory containing firmware files
941 * Add JFreeChart to Makefile.am
944 * altosui: Use recorded ground acceleration when reading eeprom files
945 * altosui: Write raw sensor data to .csv files
946 * altosui: Factor some UI elements into separate classes
947 * altosui: remove unused ReplayThread wrapper classes
948 * altosui: Require 4 sats for 'good' GPS data
949 * altosui: Create iterables for log file scanning. Split out display
951 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
953 * altosui: Deal with eeprom dates going backwards across wrap
956 * Hax0r graphing to support telem/eeprom files
959 * altosui: use Altos constants in graphing code
962 * Add callsign/serial/flight to graph title
965 * altosui: Add KML file export.
968 * add build dep on jfreechart lib
970 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
972 altos (0.7.1) unstable; urgency=low
975 * Add firmware and libaltos to 'fat' target at top-level
976 * altosui: Remove some debug printfs.
977 * altosui: libaltos.so is built with libtool -- it's in
979 * Add --with-fat-dir configure option to publish finished stand-alone
981 * altosui: Fix telemetry file reader to handle tick count wrapping
982 * altosui: Remove debug printfs from AltosTelemetryReader
983 * altosui: Fill in time value of last Eeprom record read from file
984 * altosui: Stop parsing eeprom file after hitting 'landed' state
986 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
988 altos (0.7+96+g48f5799) unstable; urgency=low
991 * altosui: conflating USB product and vendor IDs is a bad idea
993 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
995 altos (0.7+94+g1ac3d7e) unstable; urgency=low
997 * initial cut at an altosui man page
999 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
1001 altos (0.7+92+g0ea7576) unstable; urgency=low
1004 * handle versioning of ihx files (poorly) by just wildcarding the file
1008 * altosui: Need to have JVM include path substituted into libaltos
1010 * altosui: Store libaltos.so in $(libdir)/altos
1011 * altosui: Display error dialog when AltOS JNI library can't be loaded
1013 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
1015 altos (0.7+86+g6c0ae7e) unstable; urgency=low
1018 * altosui: Add explicit requirement to create classes directory
1019 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
1021 * altosui: hack to make JAVAROOT directory get created before javac
1023 * altosui: remove FATJAR from all-local to avoid building fat .jar
1027 * add libtool to build deps
1030 * altosui: Add windows installer build using 'nsis'
1031 * altosui: ignore built files
1032 * altosui: oops. renamed the nsis file to altos-windows.nsi
1033 * icon: add some icons for application programs
1034 * altosui: Add icons to application and Windows menus.
1035 * Use autotools for altosui and libaltos
1036 * altos: add some SDCDB config files
1037 * Ignore libtool files.
1038 * Add version numbers to released files. Set version to 0.7.1
1039 * Add top-level 'fat' target to aid building distribution files
1040 * altosui: Fix windows installer to ship correct files
1041 * altosui: Fix up Mac OSX .zip file
1042 * altosui: Fix linux fat distribution
1043 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
1044 * altosui: Remove debugging printf from AltosEepromReader
1045 * altosui: Eeprom files contain only one date; save it.
1046 * altosui: Add elevation and range data to main display
1047 * altosui: When replay thread is interrupted, don't make final report
1048 * altosui: Start idle thread after the rocket leaves the pad
1049 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
1050 * altosui: Prevent voice altitude data from queueing up
1051 * altosui: Use local .class files in the classpath
1052 * altosui: Record flight number when scanning file, not when running
1053 * altosui: eeprom files place 'boost' time in the flight number
1055 * altosui: ensure that 'altosui' script is installed. Pass arguments
1058 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
1060 altos (0.7+53+g59798c6) unstable; urgency=low
1063 * altosui: Abort flashing if debug port isn't working
1064 * altosui: allow flashing to be canceled from the rom config dialog
1065 * altosui: Hide internal rom config UI helper function
1066 * altosui: Remove some debug printfs from AltosRomconfig class
1067 * altosui: Post error dialog on invalid ROM config values.
1068 * altosui: build Mac OS .zip file to include paths
1069 * altosui: Report telemetry CRC errors in UI
1070 * altosui: Deal with altos bug setting radio channel while monitoring
1071 * altosui: Allow 'connect to device' when already connected
1072 * Revert "altosui: Deal with altos bug setting radio channel while
1074 * altosui: Must flush serial line after configuring for telemetry
1075 * altosui: Catch I/O errors on telemetry device, report to user
1077 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
1079 altos (0.7+40+g59a40f6) unstable; urgency=low
1082 * add distclean targets to libaltos and altosui to all Debian package
1083 to build, and clean up other distclean content as needed
1086 * altosui: missed AltosReader.class in the Makefile
1087 * altos: Bounds check Skytraq GPS tracking data array
1088 * altosui: Remove Manifest.txt from git repo as it's built now
1090 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
1092 altos (0.7+28+gd006c5e) unstable; urgency=low
1094 * add runtime dependencies for altos binary package
1096 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
1098 altos (0.7+26+gc35632e) unstable; urgency=low
1100 * don't build all the "fat" jar deliverables by default
1102 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
1104 altos (0.7+23+g25764fc) unstable; urgency=low
1107 * fix up for an 0.7 release
1108 * update changelogs for Debian build
1111 * libaltos: AltusMetrum devices use more than one USB ID.
1112 * altosui: provide separate flush_input/flush_output for serial. deal
1113 with monitor automatically
1114 * altosui: discard invalid lines while reading Eeprom flight data
1115 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
1116 * libaltos: Missing OS_LDFLAGS on cjnitest build
1117 * libaltos: cjnitest needs altos_flush now
1118 * altos: flush pending output when terminating packet mode
1119 * altos: Abort radio harder when terminating packet mode.
1120 * altos: shut down packet mode cleanly
1121 * libaltos: Fix windows build.
1122 * libaltos: Improve Makefile
1123 * Update telemetrum.inf to include all current USB ids.
1124 * libaltos: Add pre-built Mac OS X libaltos.dylib
1125 * libaltos: Add pre-built Windows .dll
1126 * altos: Windows sends USB Out packets of 0 length. Ack them.
1127 * libaltos: Use overlapped I/O on windows
1128 * altosui: Build linux, mac and windows archives on Linux
1129 * altosui: build debian-style altosui too
1130 * altosui: Devices with USB id 0x000a always get listed
1133 * continue even if rm's don't have anything to do
1134 * make invocation of 'install' pathless to work on more Unix variants
1135 * add a .gitattributes file, configuring the Mac and Windows binary
1138 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1140 altos (0.7) unstable; urgency=low
1142 * update changelogs for Debian build
1143 * fix up for an 0.7 release
1145 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1147 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1149 * fix path to installed shared library
1151 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1153 altos (0.6+373+gcf65c6b) unstable; urgency=low
1156 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1158 * altosui: Capture config and version info in .eeprom files
1159 * altosui: Merge gps date and time classes into gps class
1160 * altosui: Clear displayed data rows as needed.
1161 * altosui: Split status and info panels into separate files
1162 * altosui: Explicitly initialize Altos class
1163 * altosui: Split flight record out of telemetry class
1164 * altosui: Compute flight state from eeprom data
1165 * altosui: Add comments to Eeprom reader
1166 * altos: add callsign to packet mode, increase payload to 64 bytes
1167 * altosui: Start adding code to write csv files from eeprom/telem
1169 * ao-dumplog: add --channel option (for use with -R option)
1170 * libaltos: integrate Windows support.
1171 * altosui: Select devices by USB vendor/product ID.
1172 * altos: Define USB product ID in per-product Makefile.defs file
1173 * altosui: Make teledongle callsign configurable
1174 * altosui: Add TeleMetrum configuration
1175 * altosui: Set callsign when fetching eeprom data over the air
1178 * add freetts as a build dep
1179 * working on java packaging details
1182 * altosui: Add .ihx file reading code and stub out flashing UI
1183 * altosui: Add debug dongle API, split flash UI out
1184 * ao-dumplog: Fix --remote and --channel options to actually work
1185 * altosui: pad TM config dialog values to avoid clipping descenders
1186 * libaltos: use pipe to wake up getchar on close. use mutexes
1187 * altosui: Add lots more cc1111 debug interface functions
1188 * altosui: remove debug printf from AltosHexfile
1189 * altosui: flush serial output before waiting for reply
1190 * altosui: Remove debug printf from AltosRomconfig
1191 * altosui: Finish device programming code
1192 * altos: Place rom config variables in fixed location
1193 * altosui: make default Manifest look for built-in freetts
1194 * altosui: Separate out log file choosing dialog to share with CSV
1196 * altosui: refactor logfile chooser dialog to share more code
1197 * altosui: Add ability to create CSV file from telem or eeprom files
1198 * altosui: disable radio monitoring while using serial line for
1200 * altosui: Delay mapping Flash UI until flashing actually starts
1201 * altosui: fetch existing romconfig for flashing
1202 * altosui: always display romconfig ui while flashing
1203 * altosui: write USB serial number string while flashing
1204 * altosui: flush replies from serial link when entering debug mode
1205 * altos: always rebuild ao_product.c to track git version
1206 * altos: print GPS state flags in GPS 'g' command
1207 * altos: mark gps date written only after it gets into eeprom
1208 * altosui: Move number parsing code to Altos general class
1209 * altosui: Add AltosGreatCircle constructors
1210 * altosui: add rssi and distance/dir from pad to CSV files
1211 * altosui: AltosEepromReader was mis-setting boost tick
1212 * altosui: Add support for old (version < 3) telemetry files
1213 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1214 * altosui: When parsing saved telem files, errors shouldn't abort file
1215 * altosui: Remove debug printf from AltosState.java
1216 * altosui: command line args are converted to csv format
1217 * altos: prepare for sdcc 2.9.1
1220 * add a dummy install target
1221 * lose the prebuild hook for now while I'm fumbling
1222 * add install target for libaltos
1223 * add an install target for altosui
1226 * altosui: add elevation and range information
1229 * fix up the wrapper's path to the jar file
1230 * update Debian standards version
1231 * fix permissions on installed jar file, switch from ao-view to
1233 * install altosui man page
1234 * fix man page delivery path
1235 * Revert "lose the prebuild hook for now while I'm fumbling"
1237 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1239 altos (0.6+303+gb6da90b) unstable; urgency=low
1241 * add freetts as a build dep
1242 * move to science menu
1243 * working on java packaging details
1245 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1247 altos (0.6+292+g8fc261c) unstable; urgency=low
1249 * see if my new freetts package works
1251 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1253 altos (0.6+290+g7877496) unstable; urgency=low
1256 * altosui: check for closed serial device before reading
1257 * altosui: Remove unnecessary freetts .jar files
1258 * altosui: Close serial, join reader thread, free altos_file
1259 * altosui: remove debug printf
1260 * libaltos: build with java src encoding UTF8
1261 * altosui: construct Darwin application directory
1262 * Add Mac OS X packaging bits
1263 * altosui: Switch eeprom extension back to .eeprom
1264 * Moved Mac OS packaging to altosui dir
1265 * altosui: remove option to install to alternate volume
1266 * Make altosui test script executable
1268 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1270 altos (0.6+277+gd184819) unstable; urgency=low
1273 * fix text since TM only has one led to blink
1274 * add swig as a build dep
1275 * add a jdk to the build deps
1278 * When the EP0 IN buffer is full, don't panic, just skip sending
1280 * Add libaltos which talks to USB connected altos devices
1281 * Switch AltosUI to libaltos for device access
1282 * Present list of altos devices in nice format
1284 * Re-enable Linux support for altosui.
1285 * Darwin doesn't have strndup.
1286 * libaltos needs -I. on all systems
1287 * libaltos: make clean remove all built files
1288 * libaltos: build fat 10.5-compatible library
1289 * Add Mac OS X packaging files for altosui
1290 * Add application icons for Mac OS X
1291 * Clean up altosui build a bit
1292 * Remove directories as .class file dependencies; it makes them get
1293 rebuilt all the time
1294 * Java clean ups -- use varargs where possible, remove
1296 * Java voice reporting cleanups.
1297 * Force java source encoding to UTF-8
1298 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1300 * altosui: Catch errors opening USB devices. Limit list to relevant
1302 * Make voice and channel menus work.
1303 * Add voice test command for help in adjusting volume.
1304 * Remove debug printf
1305 * altosui: Add eeprom data capture function. No UI yet.
1306 * altosui: Add progress bar for eeprom downloading status
1307 * altosui: Fix Save flight data monitor layout, add cancel
1308 * altosui: Replace device dialog. Center eeprom monitor.
1309 * altosui: report rocket ground bearing at landing only if known
1310 * Reset GPS ready status when GPS comes unlocked on the pad
1312 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1314 altos (0.6+236+gcd8aa79) unstable; urgency=low
1317 * Telemetry code was mis-computing RSSI
1318 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1322 * significant documentation update
1323 * add build dep for sndfile
1324 * reflect documentation file name change
1325 * update to latest Debian standards version
1327 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1329 altos (0.6+224+g4766b13) unstable; urgency=low
1332 * documentation updates from Bob
1335 * Extension to KML output format, and minor bug fix
1338 * ao-view: disable radio telemetry monitoring during channel change
1339 * Add special code for USB panic's.
1340 * ao-postflight: was walking off state.data array
1341 * Abort any in-progress radio operation when changing radio channel
1343 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1345 altos (0.6+214+g16c4cae) unstable; urgency=low
1348 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1349 * merge a derivative of Bob Finch's mere mortals guide as getting started
1350 * merge the altusmetrum-themes package
1353 * Fix telemetrum.inf, tested by Adrian and Keithp
1354 * Finish basic flight monitoring UI with voice using FreeTTS
1356 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1358 altos (0.6+204+g6bd8513) unstable; urgency=low
1360 * lose the quotes since they apparently aren't necessary
1362 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1364 altos (0.6+202+gae6854d) unstable; urgency=low
1366 * update desktop file for conformance with current standards
1368 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1370 altos (0.6+200+g68eaaa6) unstable; urgency=low
1372 * add initial package build scripts for Arch Linux from Bob Finch
1373 * add desktop file provided by Bob Finch
1375 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1377 altos (0.6+195+gcde60f1) unstable; urgency=low
1379 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1381 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1383 altos (0.6+193+g314d27a) unstable; urgency=low
1386 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1388 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1390 altos (0.6+190+g8b6767e) unstable; urgency=low
1393 * Fix all stdio reading functions to be __critical
1394 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1396 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1398 altos (0.6+187+g8702f49) unstable; urgency=low
1401 * more text created during SFO->DEN flight
1402 * initial attempt at a telemetrum turn on script .. needs work
1405 * Revert "Add optional 's' command to packet slave to enable/disable
1407 * Disable interrupts while reading from stdin
1409 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1411 altos (0.6+180+g99094f0) unstable; urgency=low
1414 * Increase reset switch time to 100ms
1415 * Add optional 's' command to packet slave to enable/disable slave
1417 * More ALtosUI changes
1418 * Autodetect flite voice registration function
1421 * capture work done on SFO->DEN flight
1422 * add some RF usage information from an email reply sent today, and
1425 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1427 altos (0.6+171+g9394393) unstable; urgency=low
1433 * Only have the slave return a packet if it received one.
1435 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1437 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1440 * INSTALL file changed by auto tools
1443 * libflite may forget to reference libasound
1445 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1447 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1450 * Start adding java-based UI
1451 * Add telemetry data parsing code
1452 * Add Windows install .inf file
1453 * Fix windows install file
1454 * Add telem parsing code
1455 * Steal C code from ao-view
1456 * Display table of flight info. gps is not working yet though
1457 * Fix up table formatting
1460 * Clean up GPS data formatting
1461 * Report current gps nsat, not last locked nsat
1462 * Remove GPS data missing from skytraq. Save max height/accel/speed
1463 * Remove unused cell renderer class
1465 * Use RXTX for serial comm. Add logdir preference saving
1466 * Make ao_radio_idle keep trying to get the radio to idle.
1467 * Don't abort the radio when enabling telemetry monitoring
1468 * Clean up some altosui comments
1469 * Switch TeleMetrum from v0.2 to v1.0
1470 * Add Linux device discovery
1471 * Interrupt running replay thread when starting another replay
1472 * serial port read function cannot be interrupted. poll every 1 second
1473 * TD reports "not-connected" when GPS has 0 sats
1474 * Tasks may move in task structure as a result of ao_exit
1475 * Enable telemetry monitoring
1476 * Use 16-bit flite voice (which appears to have changed symbols
1478 * When changing RESET line, delay 20ms
1481 * choose a better set of docbook xsl files
1483 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1485 altos (0.6+131+g6629ec5) unstable; urgency=low
1487 * lose the url entirely for now
1489 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1491 altos (0.6+129+g934434f) unstable; urgency=low
1495 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1497 altos (0.6+127+g05ad583) unstable; urgency=low
1499 * need another build dep
1501 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1503 altos (0.6+125+g8f1d47e) unstable; urgency=low
1505 * make lintian happy
1506 * tweak copyright assertion
1507 * crudely incorporate "day in the life" info from web page
1508 * rewrite urls in docbook format
1510 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1512 altos (0.6+119+g00f49c8) unstable; urgency=low
1515 * update changelogs for Debian build
1516 * move gbp.conf into debian/
1517 * initial harness for documentation
1521 * Round radio calibration value instead of truncating
1522 * Document the ao-dumplog '--remote' flag for radio-link downloads
1524 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1526 altos (0.6+108+g6e61170) unstable; urgency=low
1529 * Need to duplicate new altitude conversion code in aoview.
1531 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1533 altos (0.6+106+ga1478f6) unstable; urgency=low
1536 * Add ao_radio_xmit to help test boards without flashing them.
1537 * Allow product names to have suffixes (like board revisions)
1538 * Fix and document the ao-rawload --run flag
1540 * Leave .ihx files in the build directory too - easier to debug that way
1541 * Eliminate deadlock when writing config from radio link
1542 * Fix up LED colors for each product.
1543 * Add .gitignore for ao-bringup
1546 * create a turn on script for lighting up TeleDongle v0.2 boards
1548 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1550 altos (0.6+95+g2f45953) unstable; urgency=low
1552 * update changelogs for Debian build
1553 * conditionalize use of git on executability of /usr/bin/git binary
1555 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1557 altos (0.6+88+gdeccc10) unstable; urgency=low
1559 * add gawk as a build dependency since strtonum is a gawk extension
1561 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1563 altos (0.6+86+g2491282) unstable; urgency=low
1566 * Disable monitor mode before attempting radio test.
1567 * Ensure that ao_alarm waits at least the specified time
1568 * Remove dbg driver code from telemetrum/teledongle
1569 * Add AT45DBxx1D driver
1570 * Remove green LED and temp sensor from v0.2 code
1571 * Add at45db161d.h header file for new flash part.
1572 * Add 'f' command to display flash status register contents
1573 * Dump more flash parameters for the flash_status command
1574 * Dump config block from read/write config and flash_status commands
1575 * Don't set ao_flash_setup_done until we're actually done.
1576 * Remove flash debugging printfs
1577 * Add simple gps dump command 'g'
1578 * Force idle mode by shorting the SPI clock to ground at boot time.
1579 * Switch to using internal cc1111 temperature sensor
1580 * Missing ao_mutex_put in gps_dump
1581 * Compute daytime using GPS as time base
1582 * Pull in a bit more data for filtering the start of the boost
1583 * Log GPS data on pad after boost detect.
1584 * Change barometer conversion code to shrink conversion table
1585 * Change altos build process to support per-product compile-time
1587 * Update .gitignore files
1588 * Quiet make output.
1589 * Add back stack size checking to altos linking phase
1590 * Must install .map files for ao-load to work
1592 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1594 altos (0.6+60+g10d1bbc) unstable; urgency=low
1597 * Use ao_radio_get/ao_radio_put in packet code.
1599 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1601 altos (0.6+58+gbbb152c) unstable; urgency=low
1604 * Re-order config values. Change frequency to cal
1605 * Allow radio calibration to be set from ao-load
1606 * Add --cal to man page
1608 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1610 altos (0.6+53+gcd49847) unstable; urgency=low
1613 * Remove send_serial and serial_baud commands.
1614 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1615 * Add radio calibration configuration.
1617 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1619 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1622 * Change default callsign to "N0CALL"
1624 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1626 altos (0.6+47+g4053309) unstable; urgency=low
1628 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1629 * change home URL in control file to be the AltOS page
1631 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1633 altos (0.6+43+gd6ba07e) unstable; urgency=low
1636 * Decode HDOP data from skytraq GPS
1637 * Document ao-postflight --gps and --kml options.
1638 * Make ao-postflight create filenames using input filenames.
1639 * Make TD print 0000-00-00 for invalid dates.
1640 * Fix --plot arg handling. Add -all option.
1641 * Convert telemetry file GPS satellite information in cc_log_read
1642 * Don't crash if --plot isn't passed on ao-postflight command line
1643 * ao-postflight: compute barometric alt for each GPS position
1644 * ao-postflight: don't try to use missing gps sat data
1645 * Automatically extract flight number for eeprom and telem filenames.
1647 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1649 altos (0.6+32+g87e6f3e) unstable; urgency=low
1652 * fix typo in comment
1655 * Reduce igniter firing time from 500ms to 50ms.
1656 * Add GPS date/time output to ao-postflight.
1657 * Eliminate SiRF state values from ao-view.
1659 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1661 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1664 * Add two-point accelerometer calibration.
1665 * Remove "l" command as ao-dumplong no longer uses it
1666 * Remove "d" command
1667 * Remove "f" command
1668 * Reformat ADC values to show all 16 bits
1669 * ao_flight_test was using accel value for pressure too
1670 * Pass accel calibration over telemetry stream. Telemetry data format
1672 * Add ability to dump eeprom data over radio link.
1673 * In packet master, move USB flush from packet thread to echo thread
1674 * In USB pollchar, wait for packet before re-checking USB out len
1675 * Explicitly use USB I/O routines in packet code
1676 * Flush pending input when switching to remote packet mode
1677 * Stop recording in ao-dumplog after receiving an invalid block
1678 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1679 * Add Watchdog Timer Control register definitions
1680 * Add reboot command.
1681 * Return radio to telemetry settings when packet system closed.
1682 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1683 * Loosen tolerances for main->landed transition
1684 * Provide a dummy 'uninstall' target in the src directory.
1685 * Share telemetry parsing code in cc library.
1686 * Enable telemetry receive in ao_view
1687 * Switch order of serial/flight in ao-postflight summary
1688 * Add flight number to telemetry stream.
1689 * Add date to GPS data, captured from GPRMC packet.
1690 * Stop using SiRF state info.
1692 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1694 altos (0.6) unstable; urgency=low
1697 * Add support for the SkyTraq GPS unit
1698 * Build two versions of TM, one for SiRF, one for SkyTraq
1699 * Save some DSEG space by marking cmd functions __reentrant
1700 * Add ao_wake_task and ao_exit
1701 * Add keyhole-markup generation for ao-postflight.
1702 * Initial packet bits. Just testing transmission
1703 * Add radio carrier command
1704 * Wait for TX to finish sending data
1706 * Remove reason from ao_dma_abort
1707 * Switch packet code from timer thread to ao_alarm
1708 * Use ao_radio_done to wait for TX to completely finish with packet
1709 * Send SYN packet to set sequence numbers
1711 * Do more flushing in packet test code
1712 * Use ao_alarm for ao_delay so it can be easily interrupted
1713 * Poke master to speed up packet rate when things are busy
1714 * No need to wakeup &ao_tick_count now
1715 * Enable packet-based communcation to command processor
1716 * Add more docs to the README file
1717 * Disable interrupts while removing tasks from task list
1718 * Add ao_usb_pollchar to ao.h
1720 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1722 altos (0.5+90+g127c312) unstable; urgency=low
1724 * de-version the libreadline-dev build dependency
1726 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1728 altos (0.5+86+g2de548f) unstable; urgency=low
1730 * automate push of updated and tagged master branch during
1731 debian/rules prebuild
1732 * flush repetitive junk out of debian/changelog, and update the
1734 * add support for tagging git repository on each Debian package build
1736 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1738 altos (0.5+77+gc57bd7f) unstable; urgency=low
1740 * build for Debian from git
1742 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600