1 altos (0.6+60+g10d1bbc) unstable; urgency=low
4 * Use ao_radio_get/ao_radio_put in packet code.
6 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
8 altos (0.6+58+gbbb152c) unstable; urgency=low
11 * Re-order config values. Change frequency to cal
12 * Allow radio calibration to be set from ao-load
13 * Add --cal to man page
15 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
17 altos (0.6+53+gcd49847) unstable; urgency=low
20 * Remove send_serial and serial_baud commands.
21 * Make ao_cmd_decimal produce both 32 and 16 bit values.
22 * Add radio calibration configuration.
24 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
26 altos (0.6+49+g9a1d7dd) unstable; urgency=low
29 * Change default callsign to "N0CALL"
31 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
33 altos (0.6+47+g4053309) unstable; urgency=low
35 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
36 * change home URL in control file to be the AltOS page
38 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
40 altos (0.6+43+gd6ba07e) unstable; urgency=low
43 * Decode HDOP data from skytraq GPS
44 * Document ao-postflight --gps and --kml options.
45 * Make ao-postflight create filenames using input filenames.
46 * Make TD print 0000-00-00 for invalid dates.
47 * Fix --plot arg handling. Add -all option.
48 * Convert telemetry file GPS satellite information in cc_log_read
49 * Don't crash if --plot isn't passed on ao-postflight command line
50 * ao-postflight: compute barometric alt for each GPS position
51 * ao-postflight: don't try to use missing gps sat data
52 * Automatically extract flight number for eeprom and telem filenames.
54 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
56 altos (0.6+32+g87e6f3e) unstable; urgency=low
62 * Reduce igniter firing time from 500ms to 50ms.
63 * Add GPS date/time output to ao-postflight.
64 * Eliminate SiRF state values from ao-view.
66 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
68 altos (0.6+27+gb0d7e3f) unstable; urgency=low
71 * Add two-point accelerometer calibration.
72 * Remove "l" command as ao-dumplong no longer uses it
75 * Reformat ADC values to show all 16 bits
76 * ao_flight_test was using accel value for pressure too
77 * Pass accel calibration over telemetry stream. Telemetry data format
79 * Add ability to dump eeprom data over radio link.
80 * In packet master, move USB flush from packet thread to echo thread
81 * In USB pollchar, wait for packet before re-checking USB out len
82 * Explicitly use USB I/O routines in packet code
83 * Flush pending input when switching to remote packet mode
84 * Stop recording in ao-dumplog after receiving an invalid block
85 * Move ao_match_word from ao_ignite.c to ao_cmd.c
86 * Add Watchdog Timer Control register definitions
88 * Return radio to telemetry settings when packet system closed.
89 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
90 * Loosen tolerances for main->landed transition
91 * Provide a dummy 'uninstall' target in the src directory.
92 * Share telemetry parsing code in cc library.
93 * Enable telemetry receive in ao_view
94 * Switch order of serial/flight in ao-postflight summary
95 * Add flight number to telemetry stream.
96 * Add date to GPS data, captured from GPRMC packet.
97 * Stop using SiRF state info.
99 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
101 altos (0.6) unstable; urgency=low
104 * Add support for the SkyTraq GPS unit
105 * Build two versions of TM, one for SiRF, one for SkyTraq
106 * Save some DSEG space by marking cmd functions __reentrant
107 * Add ao_wake_task and ao_exit
108 * Add keyhole-markup generation for ao-postflight.
109 * Initial packet bits. Just testing transmission
110 * Add radio carrier command
111 * Wait for TX to finish sending data
113 * Remove reason from ao_dma_abort
114 * Switch packet code from timer thread to ao_alarm
115 * Use ao_radio_done to wait for TX to completely finish with packet
116 * Send SYN packet to set sequence numbers
118 * Do more flushing in packet test code
119 * Use ao_alarm for ao_delay so it can be easily interrupted
120 * Poke master to speed up packet rate when things are busy
121 * No need to wakeup &ao_tick_count now
122 * Enable packet-based communcation to command processor
123 * Add more docs to the README file
124 * Disable interrupts while removing tasks from task list
125 * Add ao_usb_pollchar to ao.h
127 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
129 altos (0.5+90+g127c312) unstable; urgency=low
131 * de-version the libreadline-dev build dependency
133 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
135 altos (0.5+86+g2de548f) unstable; urgency=low
137 * automate push of updated and tagged master branch during
138 debian/rules prebuild
139 * flush repetitive junk out of debian/changelog, and update the
141 * add support for tagging git repository on each Debian package build
143 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
145 altos (0.5+77+gc57bd7f) unstable; urgency=low
147 * build for Debian from git
149 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600