1 altos (1.0.3~bpo60+1) squeeze-backports; urgency=low
3 * build for backports.org
5 -- Bdale Garbee <bdale@gag.com> Mon, 26 Dec 2011 01:48:47 -0700
7 altos (1.0.3) unstable; urgency=low
10 * lose the bluetooth lib dependency until it's relevant
11 * don't try to include bluetooth headers
12 * don't try to link bluetooth lib
13 * mention release notes in Releasing file prep stage
14 * more notes on release notes in Releasing
18 * altos: Create TeleMetrum v1.2 directory
19 * Add 1.0.3 release notes.
21 -- Bdale Garbee <bdale@gag.com> Sun, 25 Dec 2011 19:08:56 -0700
23 altos (1.0.2) unstable; urgency=low
26 * update release process docs
27 * update changelogs for Debian build
28 * include 1.0.1 release notes in docs, closes: #642705
29 * add run-time dependency on libjfreechart-java
32 * altos: Delay reboot by a second to avoid re-entering idle mode
33 * Bump to version 1.0.2
34 * altos: TM: Don't turn on packet slave mode until idle/invalid state
35 * doc: Add 1.0.2 release notes
37 -- Bdale Garbee <bdale@gag.com> Wed, 28 Sep 2011 01:58:27 -0600
39 altos (1.0.1) unstable; urgency=low
42 * use multimaint-merge to make Debian changelogs less ugly
43 * update TeleMini turnon script now that we've made a stable firmware release
44 * moving git-buildpackage config into .git/ since it is fairly specific to
45 Bdale's build environment, and doesn't need to be in the source package
46 * get ready for a 1.0.1 release
47 * update changelogs for Debian build
48 * fix telemini firmware path name
49 * ignore generated log file
50 * roll release notes version from 1.0 to 1.0.1
51 * roll back packaging changelog for rebuild
54 * altos: Clear callsign on initial config load
56 -- Bdale Garbee <bdale@gag.com> Fri, 26 Aug 2011 10:39:29 -0600
58 altos (1.0) unstable; urgency=low
61 * altos: Lost change that reported flight 0 when log memory was full
62 * altosui: Ancient log files used 'apogee' for 'coast' state
63 * altosui: Add 'On-board Data Logging' indicator to pad tab
66 * update changelogs for Debian build
67 * update changelogs for Debian build
70 * altosui: remove debug printf in pad pane
71 * altosui: Disable 'max flight log' config when there are stored flights
72 * altos: Merge common config code in ao_config.c
73 * Bump version to 0.9.7
74 * altos/altosui: Add ability to disable telemetry/rdf completely
75 * altosui: Clean up command line processing. Add --graph
76 * altos-fat/windows: Check and install Java 1.6 as needed
77 * altosui/windows: Fix a bunch of windows compiler warnings.
78 * altosui: Attempt to make both 32- and 64-bit windows DLLs
79 * doc: Add note about telemetry disable mode to 1.0 release notes
80 * doc: Add Installation Recommendations chapter
81 * altosui: Add a few simple unit conversions
82 * altosui: Capture date/time/serial/flight in AltosFlightStats
83 * altosui: Add date/time/serial/flight to flight stats tab
84 * altosui: Show filename in AltosGraph window
85 * altosui: Add --summary option to dump flight stats to stdout
86 * altosui: Make monitor-idle display correct 'On-board data logging' status
87 * altosui: Can't configure flight log max on TeleMini
88 * altosui: fix 'magic' string to signal end of config data
89 * altosui: Only 'show' config dialog once
90 * altosui: Reset all config data on 'reset' command
91 * altosui: Update mac os X library
92 * libaltos: fix Mac OS X function signatures
93 * altosui: add tool-tips to the button box.
96 * turn off auto-tagging during Debian build
97 * update changelogs for Debian build
98 * rewind changelog to 0.9.6.0 for rebuild
99 * update changelogs for Debian build
102 * altosui: Use system look&feel
103 * Remove stale tools (ao-dumplog, ao-postflight, ao-view)
104 * altosui: Add tool-tips to config dialogs
105 * altosui: Try to get dialogs to look a little better
109 * roll changelog back in prep for another test build
110 * update changelogs for Debian build
111 * add pkg-config to the build deps
112 * prepare for another rebuild
113 * update changelogs for Debian build
116 * altosui: Don't trust companion telemetry record 'channels' count
117 * altosui: Make flight monitor font size configurable
118 * altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
121 * doc tweaks through chap 3
124 * doc: Spelling corrections in altusmetrum.xsl
125 * doc: Document pad-mode 'on-board data logging' indicator
131 * doc: Describe packet command mode a bit better.
132 * doc: Move Packet Command Mode section to System Operations chapter
139 * doc: use 'radio link' to refer to packet command mode
145 * doc: Move updating device firmware section to separate chapter
146 * doc: Updating Firmware is now a separate chapter
152 * doc: Move the remaining command-mode descriptions to the appendix
158 * doc: Describe max flight log, ignite mode and pad orientation
159 * doc: Remove duplicate documentation about max flight log
164 * don't deliver sources.list fragment in official Debian packages
165 * changes in preparation for upload to Debian
166 * ao-view is no longer included in the altos package, so have the
167 old-style Debian menu entry point to altosui instead
168 * rewind packaging changelog to last tagged version
169 * update desktop file for consistency with package section
170 * we need a main category in the desktop file
171 * really, I mean it, no longer deliver the sources.list fragment
172 * add a postinst to remove sources.list.d fragment delivered by old
173 private versions of this package, no longer needed once we have
176 -- Bdale Garbee <bdale@gag.com> Thu, 25 Aug 2011 02:22:21 -0600
178 altos (0.9.6.0) unstable; urgency=low
181 * altos: Correct flight log max on Tm to 5k
182 * altosui: Change button to 'Configure Altimeter'
183 * altos: Remove pad_orientation functions from non-accel devices
184 * altos: Add ability to set arbitrary radio frequency
185 * altosui: Add dialogs to configure 'common' frequencies
186 * altosui: Convert from channels to frequencies
187 * Set version to 0.9.5.0
188 * altosui: altimeter is not spelled altimter
189 * altosui: Pull out BlueTooth support
190 * altos: minor type in comment about accel correction
191 * altosui: Must set radio calibration before radio setting
192 * altosui: A few misc cleanups.
193 * altosui: Have single radio_to_frequency function
194 * altosui: Save frequency after setting it in AltosFlightUI
195 * altosui: Show AltosFrequency in scan results
196 * altosui: Remove debugging printfs from AltosSerial
197 * altosui: Flush radio setting to serial device
198 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
199 * altosui: Reading serial from swing thread only bad if remote
200 * altosui: Make set of telemetries to use while scanning configurable
201 * altosui: Add close button to 'fire' dialog
202 * altos: Switch telemini from v0.1 to v1.0
203 * altosui: Don't export product defs from libaltos
204 * altosui: Ensure serial code tracks reply nesting correctly
205 * altosui: Ship TeleMini v1.0 firmware with fat blobs
206 * Altosui: Add flight statistics tab to graph window
207 * altosui: Add a 'Graph Flight' button to the 'landed' tab
208 * altosui: Prune telemetry file graphs to just the flight
209 * altosui: Plot reasonable data from Tm files
210 * altosui: Move launch-sites.txt file to altusmetrum.org
211 * Bump version to 0.9.6.0
212 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
213 * doc: Document Ignite Mode and Pad Orientation configuration options
214 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
215 * doc: Add telemetry docs to debian/linux/mac/windows packages
216 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
217 * doc: Add 1.0 release notes.
218 * altos: Pull igniter pins low as soon as possible at boot time
219 * altos: Apply igniter boot pulse-width reduction to telemini
220 * altos: remove monitor disable stubs from altimeter code
221 * ao-tools: ao-list was crashing with more than 3 devices connected
222 * libaltos: Mis-allocated device list in libaltos
223 * altos: shrink text space from ao_config.c
224 * altos: re-write a bit of GPS parsing code to reduce size
225 * altos/altosui: Report log format in the version command
226 * altos: Don't try to use non-basestations for remote eeprom download
227 * altos: Add SPI-based companion board support
228 * altos: Put SPI in slower mode when talking to companion board
229 * altos: Make sure companion task exits cleanly when done
230 * altos: add the 'L' command to show the status of a linked companion board
231 * altos: Check for companion init packet validity was busted
232 * altosui: Add companion support to the flight UI and CSV conversion
233 * altos: Send SPI message at flight state changes
234 * altos: Send serial/flight to companion board
235 * altos: wait 10s for companion to boot
236 * altosui: Clean up eeprom parsing a bit
237 * altosui: Add support for TeleScience eeprom download
238 * altosui: Devices with log-format can also delete flights
239 * altosui: Eliminate inter-chunk flush_input calls
240 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
241 * altos: Correct AO_CONFIG_MINOR from 6 to 7
242 * altos: Reset radio channel to zero when using radio setting
243 * altos: use raw height while waiting for landing
244 * altosui: don't set channel when using radio setting
245 * altosui: Respect storage limits in flight log max config
247 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
249 altos (0.9.4.5) unstable; urgency=low
252 * altosui: Mark empty eeprom records 'invalid', don't generate exception
253 * altosui: Always read whole eeprom block, even at end of flight
254 * altosui: Display eeprom parsing errors to user
255 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
258 * src/ao_cmd: Shave off bytes from doc strings
261 * altos: Oops. Lost a couple of commands when merging the doc patch
262 * altosui: Missed jcommon.jar in the Mac OS install image
263 * Bump published version number to 0.9.1
264 * aoview: remove -s option.
267 * ao_intflash: Use internal flash for storage
270 * altos: Make serial, usb, beeper and accelerometer optional components
271 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
272 * altos/test: Add baro-only flight test program
273 * altos: Start with packet slave running. Turn off in pad mode.
274 * altos: Add TeleMini v1.0
277 * ao_intflash: Avoid overwriting code
280 * altos: Switch LED usage for TeleMini around
281 * altos: Switch pins around for TeleMini
282 * bringup: Add script for telemini
283 * ao-load: Make usb descriptor rewriting optional
284 * altos: oops -- altitude reporting wasn't pausing between signals
285 * altos: Internal flash ops block when running from flash
288 * ignore new flight test file
291 * altos: Add tiny logging for TeleMini/TeleNano
292 * altos: Add kalman filters for baro-only boards
293 * altos: Tiny logging fixes. Scan at start, stop when land or full.
294 * altos: Add TeleNano support
297 * fix up script to work and have reasonable texts
300 * altos: Fix mini/nano default log size to available flash space
301 * altos/test: Add scripts to run lots of flights through the code
302 * altos: Write height values to log for nano/mini
303 * altos: Baro-only boards must not detect launch on accel or speed data
304 * altosui: Add software version to Configure AltosUI dialog
305 * altos: Don't init packet slave on TD. Make slave start optional
306 * altos: Configure packet size from send/recv parameters.
307 * altos: Make telemetry interval more consistent
308 * altos: Split out tiny telemetry from full telemetry
309 * altos: Split telenano main from telemini
310 * altos: The kalman code requires a constant sample rate
311 * altos: New telemetry report format (version 4). Supports tiny telemetry.
312 * altos: Add .sdcdbrc file for teledongle
313 * altos: Add nickle kalman implementation.
314 * altos: Switch telemetrum over to kalman filter
315 * altos: Compute a 'trust' value for the barometer
316 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
317 * altos: Clean up some debug stuff in ao_flight.c
318 * altos: Add ao_flight_debug code
319 * altos: Missing parens and some bad arithmetic in the kalman code
320 * altos: Fix up flight code testing
321 * altos: Restore sensible kalman values
322 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
323 * altos: Exit flight test at landing. Allow description in test flight list
324 * Add ao_kalman.h to .gitignore
325 * Add description to test flights
326 * altosui: Add support for telemetry version 4
327 * altosui: Add telemetry format menu and preferences
328 * altosui: Remove a bunch of debug printfs from the eeprom manager code
329 * altosui: Add support for downloading TeleMini/TeleNano flight logs
330 * altosui: Remove extra AltosEepromBlock layer
331 * altosui: swing hide/show methods are deprecated
332 * altosui: Allow TM config connection to be canceled.
333 * altos: Variable log rate in full logging code too
334 * altos: full logging must flush pending data before checking state
335 * altosui: Off-by-one error in telemetry format configuration UI
336 * altosui: Allow radio channel to be configured over the radio link
337 * altosui: Tell serial device which frame to use for timeout dialogs
338 * altosui: Handle serial calls from swing thread
339 * altos: Split up flight code into separate flight/sample/kalman bits
340 * altos: Create custom nano flight code
341 * altosui: Clean up packet link connecting dialog
342 * altosui: Make flight log downloading handle 'Connecting...' dialog
343 * altosui: Make deployment testing handle Connecting... dialog
344 * altosui: Display exception messages from swing thread
345 * altosui: Don't display 0000-00-00 for missing flight log dates
346 * altos: ao_sample_preflight was exiting preflight mode immediately
347 * altos: Run RDF beacon after apogee instead of waiting for landing
348 * altos: Enable logging during nano flights
349 * altosui: Parse and export Max flight log value
350 * altosui: Only plot acceleration when present in data file
351 * altos: Reflect ao_flight split in ao_flight_test dependencies
352 * altos: Baro useful ceiling is MSL, not AGL
353 * altos: Make ao_flight_test show true height but report saturated height
354 * altos: Add initial TeleBT code
355 * altos: Add P2SEL_*_MASK defines to cc1111.h
356 * altos: expose set of available stdio values
357 * altos: Provide for a pre-filter on commands
358 * altos: Allow any stdio to be used with packet forwarding
359 * altos: Remove serial monitor command
360 * altos: Make ao_serial_drain public
361 * altos: Clean up usage of serial port for stdio
362 * altos: Clean up serial initialization
363 * altos: Make cmd echo per-connection instead of global
364 * altos: Clean up BT serial communcations
365 * altosui: Add missing AltosTelemetryMap.java file
366 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
367 * altosui: Add TeleBT USB device support
368 * altosui: Add low-level Bluetooth APIs
369 * altos/altosui: Log averaged baro sensor data in Tm/Tn
370 * altosui: oops - lost state changes when downloading eeprom data.
371 * altos: Write a few pre-launch samples for Tm/Tn devices
372 * altosui: Add primitive bluetooth device manager UI.
373 * altosui: Create abstract AltosDevice class
374 * altosui: Make AltosBTDevice implement AltosDevice interface
375 * altosui: Make bluetooth dialog modal
376 * altosui: Use persistent list of bluetooth devices for device dialogs
377 * altos: Add delays to bt startup sequence
378 * altosui: Wait two seconds after bluetooth connect XXX
379 * altos: Solidify BT connections
380 * altos: Simplify BT communications
381 * altos: Remove bt debug command
382 * altos: remove BT logging code
383 * altosui: Eliminate ao_cmd_filter hook
384 * altosui: Make flight data download work through TeleBT
385 * altos: add telebt-v0.0 Makefile
386 * altosui: Separate out flash debug code to separate thread
387 * altosui: Fix TeleBT name in flight monitor title
388 * altosui: Display reader name (usually the device) when an I/O error occurs
389 * altosui: Move AltosIgniteUI device open out of Swing thread
390 * altosui: Fix BT manage dialog so that the device lists resize
391 * altos: Add preliminary telebt v0.1 defines
394 * first cut at a telebt turn on script
397 * altos: Add telebt-v0.1 to Makefile
398 * altos: Use USART configuration 1 with flow control for TBT
399 * altos: Fix BT link status pin for real TBT hardware
400 * altos: pull TBT v0.1 ser_reset line low
401 * altos: Add beeper to TBT v0.1
402 * altos: Debugging TBT issues -- check pin configuration after boot
403 * altos: Initialize beeper for telebt
404 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
405 * altos: clear CPU port 1 interrupt flag when handled
406 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
407 * Switch version to 0.9.4
408 * altosui: Handle old TeleDongle receiving kalman telemetry packets
409 * altos: Rename telemetry to telemetry_orig
410 * altos: Add arbitrary telemetry packet monitoring
411 * altos: Add checksum to TELEM output lines
412 * altos: Start adding new telemetry frame definitions
413 * altos: ao_radio_recv needs byte count *including* rssi and status
414 * altosui: Support raw telemetry from TeleDongle
415 * doc: Add telemetry format description
416 * doc: Complete initial telemetry description
417 * doc: Fix a few minor telemetry doc mistakes
418 * Version strings must be < 8 bytes long
419 * altos: teledongle does not need ao_packet_slave.c
420 * altos: Shrink const space in ao_config
421 * altos: Add sat info to GPS report command
422 * altos: Shrink help text
423 * altos: Add split telemetry code
424 * altos: Complete new telemetry switchover
425 * altosui: Parse remaining standard telemetry packets
426 * doc: Chang Config and Location packets
427 * altos: Adapt to changes in telemetry Configuration packet
428 * doc: Add section about TeleDongle USB line format
429 * altosui: Elide nul bytes at end of telemetry string values
430 * altosui: Elide missing values from graphs
431 * altosui: Add main/drogue voltages to default graph
432 * altosui: Remove debug printf.
433 * altosui: Compress telemetry records marked with the same time
434 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
435 * altos: Shrink ao_config_callsign_set
436 * altos: Shrink ao_add_task by rolling up a memset loop
437 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
438 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
439 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
440 * altos: Switch ao_report.c __xdata to __pdata
441 * altos: Switch ao_rssi.c __xdata to __pdata
442 * altos: Switch ao_sample.c __xdata to __pdata
443 * altos: Switch ao_serial.c __xdata to __pdata
444 * altos: Switch ao_stdio.c __data to __pdata
445 * altos: Switch ao_telemetry.c __xdata to __pdata
446 * altos: Switch ao_usb.c __xdata to __pdata
447 * altos: Switch const for __code in struct ao_cmds
448 * altos: switch ao_cmd __xdata to __pdata
449 * altos: Switch ao_config.c __xdata to __pdata
450 * altos: Switch ao_dbg.c __xdata to __pdata
451 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
452 * altos: Switch flash drivers __xdata to __pdata
453 * altos: Switch Tm and Tn to common telemetry code
454 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
455 * altos: Ensure low-rate telem packets interleave with sensor telem packets
456 * altos: product defines are always in ao_product.h
457 * altosui: Build device constants into .java code
458 * altosui: Don't show missing igniter and gps values
459 * altos: new versions of sdcc require __ prefixes for custom keywords
460 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
461 * altosui: Start adding support for scanning radio for available devices
462 * altosui: Pop up monitor window from scan dialog
463 * altosui: Remove debugging printf from AltosLog
464 * altosui: Configuration telemetry record includes flight number
465 * altosui: Finish radio scanning UI
466 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
467 * altosui: Initialize channel and telemetry before use in ScanUI
468 * altosui: Set 'seen' bits in legacy telemetry packet reader
469 * altosui: Add map preloading GUI
470 * altosui: Try to avoid resize weirdness with map preloading
471 * altosui: Flush telemetry lines before starting to watch for scan results
472 * altosui: Display full map preload area in view.
473 * altosui: Remove a bunch of sitemap debugging printfs
476 * altosui: Make sure degree and minute values are visible (map preload)
479 * Set version to 0.9.4.4
480 * altos, altosui: Add igniter mode (dual, apogee, main)
481 * altosui: Download list of site locations for map preloading
482 * altosui: Add launch-sites.txt
483 * altosui: Add a bunch more site locations
484 * altosui: Mark preload site location with red circles (like launch)
485 * Fix NCR Pawnee location
486 * Add HARA Bragg Farms site
487 * altosui: Change continutity colors to yellow/magenta
488 * altos: Add ability to read new TELEM files to ao_flight_test
489 * altos: Average height values for landing detection
490 * altos: Reduce height averaging filter time constant
491 * altos: Require sequencing through 'main' state before landing
492 * altosui: Standard text field in flight UI needs more width (now 20)
493 * altosui: Parse accel cal from 'c s' command
494 * altosui: Simple timeouts don't work with query data
495 * altosui: Add idle monitor dialog
496 * altos/altosui: Add pad orientation configure option
499 * update version for a Bdale build for use turning on TeleMini v1.0
500 * simplify version in last changelog entry so git-dch is less confused
501 * update changelogs for Debian build
502 * update changelogs for Debian build
503 * stop doing automatic tag push during builds
504 * build depend on bluetooth dev package
505 * clean up all existing lintian warnings
506 * rewind changelog for re-build of 0.9.4.5
508 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
510 altos (0.9.1) unstable; urgency=low
513 * ao-load: fix usage message to note that '=' is required for options
514 * altos/test: Add dependencies in the Makefile for ao_flight_test
515 * altos/test: auto-configure acceleration parameters from the log file
518 * ao_radio: generalise setup of packet size
519 * src/ao_gps_skytraq: simplify parsing code
520 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
523 * tie bringup scripts to Bdale's bench TeleDongle
525 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
527 altos (0.9) unstable; urgency=low
531 * update changelogs for Debian build
532 * update turnon script to prefer TeleDongle as programmer
535 * altos: Program default flight log max value for new boards
537 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
539 altos (0.8.1+81+g4ae724f) unstable; urgency=low
541 * we need an install target to prevent parent dir make from failing
543 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
545 altos (0.8.1+79+g9a5666f) unstable; urgency=low
548 * doc: Don't delete telemetrum-outline.pdf
549 * doc: Add v0.9 features from altosui to documentation.
552 * add 0.9 revision entry, with caveat about telemetry format change
553 * freshen copyright year
556 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
557 * fat: Add docs to Linux package
558 * doc: Build with 'make all' from top level. Build with 'make fat'
560 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
562 altos (0.8.1+71+gda42f40) unstable; urgency=low
565 * doc: Add telemetrum mounting template in svg and pdf forms
568 * Re-order and re-arrange eeprom download dialog
569 * Convert EepromSelect dialog to use a GridBag
570 * Close serial port if Download/Delete dialog is cancelled.
573 * altosui: Reset eeprom download instance variables before reading
575 * altosui: Make serial debug more complete and accurate
576 * altosui: Use long input flush timeout when remote.
577 * altosui: Remove debug message when eeprom downloads are complete.
578 * altosui: Ensure serial device is closed after eeprom download
580 * altosui: Require 4 sats to light up the 'GPS locked' light.
581 * doc: inkscape tracks the filename inside the document
582 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
583 * altos: Flush log when full
586 * altos: Restructure skytraq NMEA parsing code to save some space
589 * altos: average 512 accel/baro samples at startup instead of 1000
592 * altos: Added check for an accel value above 1.5g
593 * altos: Added check for out of bounds accel
596 * altos: Add DATA_TO_XDATA to linux test harness
597 * altosui: Remove spurious colons from eeprom selection headers
600 * Rework invalid accel cal detection code
603 * altos: Auto-calibrate linux-based flight testing code
604 * altos: Ensure flight code gets first crack at new ADC data
605 * altos: Sample the accelerometer reference voltage on v1.1 boards
606 * altos: Optimize fetching of ADC data in flight code
607 * altos: Use 5V reference data to correct accelerometer measurements.
608 * doc: Remove mention of ao_wake_task
611 * update documentation to reflect reality that modifying a board for
612 separate pyro battery is not trivial
614 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
616 altos (0.8.1+42+g646e192) unstable; urgency=low
619 * altosui: Show dialog after successful delete or when no flights
620 * altosui: Ensure serial line is flushed after disabling remote link
621 * altosui: Add preference for serial debugging.
623 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
625 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
628 * altos: Add configuration parameter for maximum flight log size
629 * altos: support storage of multiple flights.
630 * altos: Speed up at45 and 25lc erase speeds
631 * altos: white space fix
632 * altos: report flight log offsets in hex block numbers instead of
634 * altos: ensure erase mark is written when erasing flights
637 * altos: Optimize Morse code generation
640 * altos: Check requested log max size against available space
641 * altos: Check for full log and complain
642 * altosui: Add configuration of flight log size
645 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
646 * altos: Remove redundant initialization of ao_interval variables
649 * altosui: Split eeprom download code apart
650 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
652 * altosui: Add support for parsing list of flights from the 'l'
654 * altosui: Add eeprom 'manage' ui to download and delete multiple
656 * altos: check for valid flight number in ao_log_delete
658 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
660 altos (0.8.1+18+g408a3e0) unstable; urgency=low
663 * altosui: move maps to subdir, fix E/W mismatch
666 * altos: clean up radio abort paths. Share radio code.
667 * altos: eliminate ao_wake_task
668 * windows: Add compatibility IDs to telemetrum.inf
669 * windows: Update NSIS installer file to use compatibility IDs
670 * altos: Split out SPI driver.
671 * altos: Add telemetrum-v1.1 directory
672 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
673 * altos: Simplify storage API
674 * altos: Require manual flight erasing.
675 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
676 * altos: Rip out 'optimization' in ao_log_scan
677 * altos: Mark end of available flight list with 'done' to make the UI
679 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
681 altos (0.8.1+4+gea95c06) unstable; urgency=low
683 * fix symlink paths in rules file
685 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
687 altos (0.8.1+2+gea7130e) unstable; urgency=low
689 * modify Debian package build to deliver one copy of background.png
692 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
694 altos (0.8.1) unstable; urgency=low
697 * moved doc dir in web content to AltOS tree
698 * fix publish target in doc/Makefile
699 * fix section layering
700 * fix an Altos vs Altus typo in the docs
701 * adding Bdale's release process document to the source tree
704 * windows: Add jfreechart.jar and jcommon.jar to windows install image
705 * Move "Releasing" to top level
706 * Add minimal release testing plan to Releasing
711 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
713 altos (0.8) unstable; urgency=low
716 * altosui: Correct windows hardware IDs for nsis installer file
717 * windows: try harder to get windows install to work
718 * windows: remove some non-existent .inf file section references
719 * windows: more .inf file hacking
720 * windows: Bump .inf file version
723 * declaring 0.8 released
724 * update changelogs for Debian build
725 * update changelogs for Debian build
726 * rewind changelog to recover from stupid build failure
728 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
730 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
733 * altosui: Split out flight monitoring to separate window
734 * altosui: Create buttons for main actions
735 * altosui: Fix channel setting at serial open time
736 * altosui: Fix more calls to AltosPreferences.channel()
737 * altosui: Create abstract interface for flight data display
738 * altosui: Add tab UI with 'pad' mode.
739 * altosui: Add ascent, descent and landed tabs
742 * Updated PKGBUILD-git.altos
745 * altos: Use grey leds when unlit - easier to see
748 * use value_font for values
749 * add --replay command line argument
750 * read preferences for --replay
751 * reduce font size for FlightInfoTable
752 * use grayled.png for off
753 * add compass bearing to voice output
754 * add compass bearing during descent
755 * add site map tab, at least for QRS launches
757 * make infotable scrollable, revert its fontsize to 14
758 * pull up maps for arbitrary locations
759 * better error behaviour if no map
762 * first cut at instructions on how to re-flash TM and TD devices based
764 * fold in content from Keith's email on the re-flashing subject
767 * altosui: Add RF calibration to TeleMetrum config dialog
770 * AltosTelemetryReader: actually open serial port
771 * AltosSiteMap: add targeting circles around landing site
774 * continuing to work on the docs
777 * altosui: Eliminate unncessary import altosui lines
778 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
779 * altosui: Replace flight status table with labels, fix resize.
780 * altosui: With --replay option, exit when replay window is closed
781 * altosui: oops, missed a file in the previous commit
782 * altosui: eliminate menu bar, moving elements to buttons.
783 * altosui: add reboot button to telemetrum configuration UI
786 * add a paragraph about forcing TM back to idle mode if an accel cal
790 * altosui: Add callsign configuration in AltosUI configuration dialog
791 * altosui: Cleanup flight UI layout
792 * altosui: Add igniter status to ascent and descent tabs
795 * altosui: tile site maps
796 * AltosSiteMapTile: autoscale to about 2 nmi per tile
797 * AltosSiteMapTile: adjust centering calculation
798 * AltosSiteMapTile: adjust scale to 1 nmi per tile
801 * altosui: Add igniter ground testing code
802 * altosui: Unify datafile selection to AltosDataChooser
803 * altosui: Clean up global AltosUI configuration settings dialog
804 * doc: Add preliminary altosui documentation
805 * doc: git ignore generated doc files
806 * doc: Document the 'Flash Image' operation.
807 * altosui: Use timeouts to recover from broken packet links.
810 * update turnon scripts to use stashed copies of stable release
814 * altosui: switch channel selector to combo box. Shorten displayed
816 * altosui: When switching log files, don't terminate log thread
817 * altosui: calling thread.interrupt with null thread doesn't work well
818 * altosui: Initialize display thread state in constructor instead of
820 * altosui: Fix channel changing in flight UI to actually work
823 * AltosSiteMap: add autoscroll and grabndrag scroll
824 * AltosSiteMapTile: seperate map and drawing layers
825 * AltosSiteMap: automatic fetching of map data
826 * AltosSiteMapTile: draw boost circle as well as landed
827 * AltosAscent/Descent: tidy up layout
828 * AltosDescent: switch elev from height to range
834 * AltosSiteMap: major refactoring
838 * altosui: change descent tab formatting to four columns
841 * AltosSiteMap: be more polite about preferred size
845 * altosui: Rewrite info table to mix with scroll pane well. Fix
849 * AltosSiteMap: better gps check, lower zoom
852 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
855 * AltosSiteMap: explain tile size better
856 * AltosSiteMap: extend map if rocket goes far away
857 * AltosSiteMap: try to get new tile construction right
858 * AltosSiteMap: thread safe tile addition
859 * AltosSiteMap: refactor tile collection
860 * AltosSiteMap: never accept 0,0 as lat/long
861 * AltosSiteMap: limit nr of tiles to 200x200
864 * altosui: When fixing eeprom gps time information, make GPS data
868 * AltosSiteMap: ensure buffer around active tile
869 * altosui: improve sitemap scrolling behaviour
870 * altosui: keep sitemap more centred on rocket
873 * altos: Add on/off modes to 'C' command
876 * Added PKGBUILDs for deps into contribs
879 * altosui: Close serial port when debug link fails
880 * altos: assume igniter worked.
883 * add a rudimentary --help for command line use
886 * doc: Add internal documentation for AltOS
889 * altosui: don't switch away from user selected tab
890 * altosui: sitemap uses rocket gps if no pad gps
893 * merge Keith's AltosUI documention into "the big book"
894 * lose the placeholder on how GPS works, as it's going to be a
897 * altos: remove unused variable from ao_igniter
898 * altos: Don't abort radio transmissions with ao_radio_abort
899 * altos: Make radio test command careful with the radio mutex.
900 * altosui: Make AltosSerial.flush_input keep reading while non-empty
901 * altosui: New AltosSerial.set_radio function sets channel/call
902 * altosui: Disable radio configation over packet link.
903 * altosui: Let people fire igniters that don't read as 'ready'
904 * altosui: Make sure packet mode is turned off when the connection
908 * docs: Document altosui "Graph Data" button
911 * Move altosui to the top level, placing libaltos inside it.
914 * doc: Document altosui "Site Map" tab
917 * Missing change to top level Makefile to build altosui
920 * fix missing section close in Site Map content
922 * manually fold in documentation work from the master branch
925 * doc: Reformat altos to use sections for each function
926 * doc: Add more authors, fix URL formatting, note that AltosUI
928 * doc: Rename telemetrum-doc as altusmetrum
932 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
934 altos (0.7.1+36+g811ced6) unstable; urgency=low
937 * remove the csv build dep, as that code will be abandoned
940 * altosui: Remove ability to graph data in .csv files
941 * altosui: Separate out jfreechart and jcommon directories
943 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
945 altos (0.7.1+32+g8103432) unstable; urgency=low
947 * add build-dep on libcsv-java
949 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
951 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
954 * make the column headers comma separated, too, so they align with the
958 * altosui: set default .csv file name in file save dialog
959 * altosui: Remember directory containing firmware files
963 * Add JFreeChart to Makefile.am
966 * altosui: Use recorded ground acceleration when reading eeprom files
967 * altosui: Write raw sensor data to .csv files
968 * altosui: Factor some UI elements into separate classes
969 * altosui: remove unused ReplayThread wrapper classes
970 * altosui: Require 4 sats for 'good' GPS data
971 * altosui: Create iterables for log file scanning. Split out display
973 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
975 * altosui: Deal with eeprom dates going backwards across wrap
978 * Hax0r graphing to support telem/eeprom files
981 * altosui: use Altos constants in graphing code
984 * Add callsign/serial/flight to graph title
987 * altosui: Add KML file export.
990 * add build dep on jfreechart lib
992 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
994 altos (0.7.1) unstable; urgency=low
997 * Add firmware and libaltos to 'fat' target at top-level
998 * altosui: Remove some debug printfs.
999 * altosui: libaltos.so is built with libtool -- it's in
1001 * Add --with-fat-dir configure option to publish finished stand-alone
1003 * altosui: Fix telemetry file reader to handle tick count wrapping
1004 * altosui: Remove debug printfs from AltosTelemetryReader
1005 * altosui: Fill in time value of last Eeprom record read from file
1006 * altosui: Stop parsing eeprom file after hitting 'landed' state
1008 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
1010 altos (0.7+96+g48f5799) unstable; urgency=low
1013 * altosui: conflating USB product and vendor IDs is a bad idea
1015 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
1017 altos (0.7+94+g1ac3d7e) unstable; urgency=low
1019 * initial cut at an altosui man page
1021 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
1023 altos (0.7+92+g0ea7576) unstable; urgency=low
1026 * handle versioning of ihx files (poorly) by just wildcarding the file
1030 * altosui: Need to have JVM include path substituted into libaltos
1032 * altosui: Store libaltos.so in $(libdir)/altos
1033 * altosui: Display error dialog when AltOS JNI library can't be loaded
1035 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
1037 altos (0.7+86+g6c0ae7e) unstable; urgency=low
1040 * altosui: Add explicit requirement to create classes directory
1041 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
1043 * altosui: hack to make JAVAROOT directory get created before javac
1045 * altosui: remove FATJAR from all-local to avoid building fat .jar
1049 * add libtool to build deps
1052 * altosui: Add windows installer build using 'nsis'
1053 * altosui: ignore built files
1054 * altosui: oops. renamed the nsis file to altos-windows.nsi
1055 * icon: add some icons for application programs
1056 * altosui: Add icons to application and Windows menus.
1057 * Use autotools for altosui and libaltos
1058 * altos: add some SDCDB config files
1059 * Ignore libtool files.
1060 * Add version numbers to released files. Set version to 0.7.1
1061 * Add top-level 'fat' target to aid building distribution files
1062 * altosui: Fix windows installer to ship correct files
1063 * altosui: Fix up Mac OSX .zip file
1064 * altosui: Fix linux fat distribution
1065 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
1066 * altosui: Remove debugging printf from AltosEepromReader
1067 * altosui: Eeprom files contain only one date; save it.
1068 * altosui: Add elevation and range data to main display
1069 * altosui: When replay thread is interrupted, don't make final report
1070 * altosui: Start idle thread after the rocket leaves the pad
1071 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
1072 * altosui: Prevent voice altitude data from queueing up
1073 * altosui: Use local .class files in the classpath
1074 * altosui: Record flight number when scanning file, not when running
1075 * altosui: eeprom files place 'boost' time in the flight number
1077 * altosui: ensure that 'altosui' script is installed. Pass arguments
1080 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
1082 altos (0.7+53+g59798c6) unstable; urgency=low
1085 * altosui: Abort flashing if debug port isn't working
1086 * altosui: allow flashing to be canceled from the rom config dialog
1087 * altosui: Hide internal rom config UI helper function
1088 * altosui: Remove some debug printfs from AltosRomconfig class
1089 * altosui: Post error dialog on invalid ROM config values.
1090 * altosui: build Mac OS .zip file to include paths
1091 * altosui: Report telemetry CRC errors in UI
1092 * altosui: Deal with altos bug setting radio channel while monitoring
1093 * altosui: Allow 'connect to device' when already connected
1094 * Revert "altosui: Deal with altos bug setting radio channel while
1096 * altosui: Must flush serial line after configuring for telemetry
1097 * altosui: Catch I/O errors on telemetry device, report to user
1099 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
1101 altos (0.7+40+g59a40f6) unstable; urgency=low
1104 * add distclean targets to libaltos and altosui to all Debian package
1105 to build, and clean up other distclean content as needed
1108 * altosui: missed AltosReader.class in the Makefile
1109 * altos: Bounds check Skytraq GPS tracking data array
1110 * altosui: Remove Manifest.txt from git repo as it's built now
1112 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
1114 altos (0.7+28+gd006c5e) unstable; urgency=low
1116 * add runtime dependencies for altos binary package
1118 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
1120 altos (0.7+26+gc35632e) unstable; urgency=low
1122 * don't build all the "fat" jar deliverables by default
1124 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
1126 altos (0.7+23+g25764fc) unstable; urgency=low
1129 * fix up for an 0.7 release
1130 * update changelogs for Debian build
1133 * libaltos: AltusMetrum devices use more than one USB ID.
1134 * altosui: provide separate flush_input/flush_output for serial. deal
1135 with monitor automatically
1136 * altosui: discard invalid lines while reading Eeprom flight data
1137 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
1138 * libaltos: Missing OS_LDFLAGS on cjnitest build
1139 * libaltos: cjnitest needs altos_flush now
1140 * altos: flush pending output when terminating packet mode
1141 * altos: Abort radio harder when terminating packet mode.
1142 * altos: shut down packet mode cleanly
1143 * libaltos: Fix windows build.
1144 * libaltos: Improve Makefile
1145 * Update telemetrum.inf to include all current USB ids.
1146 * libaltos: Add pre-built Mac OS X libaltos.dylib
1147 * libaltos: Add pre-built Windows .dll
1148 * altos: Windows sends USB Out packets of 0 length. Ack them.
1149 * libaltos: Use overlapped I/O on windows
1150 * altosui: Build linux, mac and windows archives on Linux
1151 * altosui: build debian-style altosui too
1152 * altosui: Devices with USB id 0x000a always get listed
1155 * continue even if rm's don't have anything to do
1156 * make invocation of 'install' pathless to work on more Unix variants
1157 * add a .gitattributes file, configuring the Mac and Windows binary
1160 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1162 altos (0.7) unstable; urgency=low
1164 * update changelogs for Debian build
1165 * fix up for an 0.7 release
1167 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1169 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1171 * fix path to installed shared library
1173 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1175 altos (0.6+373+gcf65c6b) unstable; urgency=low
1178 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1180 * altosui: Capture config and version info in .eeprom files
1181 * altosui: Merge gps date and time classes into gps class
1182 * altosui: Clear displayed data rows as needed.
1183 * altosui: Split status and info panels into separate files
1184 * altosui: Explicitly initialize Altos class
1185 * altosui: Split flight record out of telemetry class
1186 * altosui: Compute flight state from eeprom data
1187 * altosui: Add comments to Eeprom reader
1188 * altos: add callsign to packet mode, increase payload to 64 bytes
1189 * altosui: Start adding code to write csv files from eeprom/telem
1191 * ao-dumplog: add --channel option (for use with -R option)
1192 * libaltos: integrate Windows support.
1193 * altosui: Select devices by USB vendor/product ID.
1194 * altos: Define USB product ID in per-product Makefile.defs file
1195 * altosui: Make teledongle callsign configurable
1196 * altosui: Add TeleMetrum configuration
1197 * altosui: Set callsign when fetching eeprom data over the air
1200 * add freetts as a build dep
1201 * working on java packaging details
1204 * altosui: Add .ihx file reading code and stub out flashing UI
1205 * altosui: Add debug dongle API, split flash UI out
1206 * ao-dumplog: Fix --remote and --channel options to actually work
1207 * altosui: pad TM config dialog values to avoid clipping descenders
1208 * libaltos: use pipe to wake up getchar on close. use mutexes
1209 * altosui: Add lots more cc1111 debug interface functions
1210 * altosui: remove debug printf from AltosHexfile
1211 * altosui: flush serial output before waiting for reply
1212 * altosui: Remove debug printf from AltosRomconfig
1213 * altosui: Finish device programming code
1214 * altos: Place rom config variables in fixed location
1215 * altosui: make default Manifest look for built-in freetts
1216 * altosui: Separate out log file choosing dialog to share with CSV
1218 * altosui: refactor logfile chooser dialog to share more code
1219 * altosui: Add ability to create CSV file from telem or eeprom files
1220 * altosui: disable radio monitoring while using serial line for
1222 * altosui: Delay mapping Flash UI until flashing actually starts
1223 * altosui: fetch existing romconfig for flashing
1224 * altosui: always display romconfig ui while flashing
1225 * altosui: write USB serial number string while flashing
1226 * altosui: flush replies from serial link when entering debug mode
1227 * altos: always rebuild ao_product.c to track git version
1228 * altos: print GPS state flags in GPS 'g' command
1229 * altos: mark gps date written only after it gets into eeprom
1230 * altosui: Move number parsing code to Altos general class
1231 * altosui: Add AltosGreatCircle constructors
1232 * altosui: add rssi and distance/dir from pad to CSV files
1233 * altosui: AltosEepromReader was mis-setting boost tick
1234 * altosui: Add support for old (version < 3) telemetry files
1235 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1236 * altosui: When parsing saved telem files, errors shouldn't abort file
1237 * altosui: Remove debug printf from AltosState.java
1238 * altosui: command line args are converted to csv format
1239 * altos: prepare for sdcc 2.9.1
1242 * add a dummy install target
1243 * lose the prebuild hook for now while I'm fumbling
1244 * add install target for libaltos
1245 * add an install target for altosui
1248 * altosui: add elevation and range information
1251 * fix up the wrapper's path to the jar file
1252 * update Debian standards version
1253 * fix permissions on installed jar file, switch from ao-view to
1255 * install altosui man page
1256 * fix man page delivery path
1257 * Revert "lose the prebuild hook for now while I'm fumbling"
1259 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1261 altos (0.6+303+gb6da90b) unstable; urgency=low
1263 * add freetts as a build dep
1264 * move to science menu
1265 * working on java packaging details
1267 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1269 altos (0.6+292+g8fc261c) unstable; urgency=low
1271 * see if my new freetts package works
1273 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1275 altos (0.6+290+g7877496) unstable; urgency=low
1278 * altosui: check for closed serial device before reading
1279 * altosui: Remove unnecessary freetts .jar files
1280 * altosui: Close serial, join reader thread, free altos_file
1281 * altosui: remove debug printf
1282 * libaltos: build with java src encoding UTF8
1283 * altosui: construct Darwin application directory
1284 * Add Mac OS X packaging bits
1285 * altosui: Switch eeprom extension back to .eeprom
1286 * Moved Mac OS packaging to altosui dir
1287 * altosui: remove option to install to alternate volume
1288 * Make altosui test script executable
1290 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1292 altos (0.6+277+gd184819) unstable; urgency=low
1295 * fix text since TM only has one led to blink
1296 * add swig as a build dep
1297 * add a jdk to the build deps
1300 * When the EP0 IN buffer is full, don't panic, just skip sending
1302 * Add libaltos which talks to USB connected altos devices
1303 * Switch AltosUI to libaltos for device access
1304 * Present list of altos devices in nice format
1306 * Re-enable Linux support for altosui.
1307 * Darwin doesn't have strndup.
1308 * libaltos needs -I. on all systems
1309 * libaltos: make clean remove all built files
1310 * libaltos: build fat 10.5-compatible library
1311 * Add Mac OS X packaging files for altosui
1312 * Add application icons for Mac OS X
1313 * Clean up altosui build a bit
1314 * Remove directories as .class file dependencies; it makes them get
1315 rebuilt all the time
1316 * Java clean ups -- use varargs where possible, remove
1318 * Java voice reporting cleanups.
1319 * Force java source encoding to UTF-8
1320 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1322 * altosui: Catch errors opening USB devices. Limit list to relevant
1324 * Make voice and channel menus work.
1325 * Add voice test command for help in adjusting volume.
1326 * Remove debug printf
1327 * altosui: Add eeprom data capture function. No UI yet.
1328 * altosui: Add progress bar for eeprom downloading status
1329 * altosui: Fix Save flight data monitor layout, add cancel
1330 * altosui: Replace device dialog. Center eeprom monitor.
1331 * altosui: report rocket ground bearing at landing only if known
1332 * Reset GPS ready status when GPS comes unlocked on the pad
1334 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1336 altos (0.6+236+gcd8aa79) unstable; urgency=low
1339 * Telemetry code was mis-computing RSSI
1340 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1344 * significant documentation update
1345 * add build dep for sndfile
1346 * reflect documentation file name change
1347 * update to latest Debian standards version
1349 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1351 altos (0.6+224+g4766b13) unstable; urgency=low
1354 * documentation updates from Bob
1357 * Extension to KML output format, and minor bug fix
1360 * ao-view: disable radio telemetry monitoring during channel change
1361 * Add special code for USB panic's.
1362 * ao-postflight: was walking off state.data array
1363 * Abort any in-progress radio operation when changing radio channel
1365 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1367 altos (0.6+214+g16c4cae) unstable; urgency=low
1370 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1371 * merge a derivative of Bob Finch's mere mortals guide as getting started
1372 * merge the altusmetrum-themes package
1375 * Fix telemetrum.inf, tested by Adrian and Keithp
1376 * Finish basic flight monitoring UI with voice using FreeTTS
1378 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1380 altos (0.6+204+g6bd8513) unstable; urgency=low
1382 * lose the quotes since they apparently aren't necessary
1384 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1386 altos (0.6+202+gae6854d) unstable; urgency=low
1388 * update desktop file for conformance with current standards
1390 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1392 altos (0.6+200+g68eaaa6) unstable; urgency=low
1394 * add initial package build scripts for Arch Linux from Bob Finch
1395 * add desktop file provided by Bob Finch
1397 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1399 altos (0.6+195+gcde60f1) unstable; urgency=low
1401 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1403 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1405 altos (0.6+193+g314d27a) unstable; urgency=low
1408 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1410 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1412 altos (0.6+190+g8b6767e) unstable; urgency=low
1415 * Fix all stdio reading functions to be __critical
1416 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1418 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1420 altos (0.6+187+g8702f49) unstable; urgency=low
1423 * more text created during SFO->DEN flight
1424 * initial attempt at a telemetrum turn on script .. needs work
1427 * Revert "Add optional 's' command to packet slave to enable/disable
1429 * Disable interrupts while reading from stdin
1431 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1433 altos (0.6+180+g99094f0) unstable; urgency=low
1436 * Increase reset switch time to 100ms
1437 * Add optional 's' command to packet slave to enable/disable slave
1439 * More ALtosUI changes
1440 * Autodetect flite voice registration function
1443 * capture work done on SFO->DEN flight
1444 * add some RF usage information from an email reply sent today, and
1447 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1449 altos (0.6+171+g9394393) unstable; urgency=low
1455 * Only have the slave return a packet if it received one.
1457 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1459 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1462 * INSTALL file changed by auto tools
1465 * libflite may forget to reference libasound
1467 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1469 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1472 * Start adding java-based UI
1473 * Add telemetry data parsing code
1474 * Add Windows install .inf file
1475 * Fix windows install file
1476 * Add telem parsing code
1477 * Steal C code from ao-view
1478 * Display table of flight info. gps is not working yet though
1479 * Fix up table formatting
1482 * Clean up GPS data formatting
1483 * Report current gps nsat, not last locked nsat
1484 * Remove GPS data missing from skytraq. Save max height/accel/speed
1485 * Remove unused cell renderer class
1487 * Use RXTX for serial comm. Add logdir preference saving
1488 * Make ao_radio_idle keep trying to get the radio to idle.
1489 * Don't abort the radio when enabling telemetry monitoring
1490 * Clean up some altosui comments
1491 * Switch TeleMetrum from v0.2 to v1.0
1492 * Add Linux device discovery
1493 * Interrupt running replay thread when starting another replay
1494 * serial port read function cannot be interrupted. poll every 1 second
1495 * TD reports "not-connected" when GPS has 0 sats
1496 * Tasks may move in task structure as a result of ao_exit
1497 * Enable telemetry monitoring
1498 * Use 16-bit flite voice (which appears to have changed symbols
1500 * When changing RESET line, delay 20ms
1503 * choose a better set of docbook xsl files
1505 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1507 altos (0.6+131+g6629ec5) unstable; urgency=low
1509 * lose the url entirely for now
1511 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1513 altos (0.6+129+g934434f) unstable; urgency=low
1517 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1519 altos (0.6+127+g05ad583) unstable; urgency=low
1521 * need another build dep
1523 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1525 altos (0.6+125+g8f1d47e) unstable; urgency=low
1527 * make lintian happy
1528 * tweak copyright assertion
1529 * crudely incorporate "day in the life" info from web page
1530 * rewrite urls in docbook format
1532 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1534 altos (0.6+119+g00f49c8) unstable; urgency=low
1537 * update changelogs for Debian build
1538 * move gbp.conf into debian/
1539 * initial harness for documentation
1543 * Round radio calibration value instead of truncating
1544 * Document the ao-dumplog '--remote' flag for radio-link downloads
1546 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1548 altos (0.6+108+g6e61170) unstable; urgency=low
1551 * Need to duplicate new altitude conversion code in aoview.
1553 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1555 altos (0.6+106+ga1478f6) unstable; urgency=low
1558 * Add ao_radio_xmit to help test boards without flashing them.
1559 * Allow product names to have suffixes (like board revisions)
1560 * Fix and document the ao-rawload --run flag
1562 * Leave .ihx files in the build directory too - easier to debug that way
1563 * Eliminate deadlock when writing config from radio link
1564 * Fix up LED colors for each product.
1565 * Add .gitignore for ao-bringup
1568 * create a turn on script for lighting up TeleDongle v0.2 boards
1570 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1572 altos (0.6+95+g2f45953) unstable; urgency=low
1574 * update changelogs for Debian build
1575 * conditionalize use of git on executability of /usr/bin/git binary
1577 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1579 altos (0.6+88+gdeccc10) unstable; urgency=low
1581 * add gawk as a build dependency since strtonum is a gawk extension
1583 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1585 altos (0.6+86+g2491282) unstable; urgency=low
1588 * Disable monitor mode before attempting radio test.
1589 * Ensure that ao_alarm waits at least the specified time
1590 * Remove dbg driver code from telemetrum/teledongle
1591 * Add AT45DBxx1D driver
1592 * Remove green LED and temp sensor from v0.2 code
1593 * Add at45db161d.h header file for new flash part.
1594 * Add 'f' command to display flash status register contents
1595 * Dump more flash parameters for the flash_status command
1596 * Dump config block from read/write config and flash_status commands
1597 * Don't set ao_flash_setup_done until we're actually done.
1598 * Remove flash debugging printfs
1599 * Add simple gps dump command 'g'
1600 * Force idle mode by shorting the SPI clock to ground at boot time.
1601 * Switch to using internal cc1111 temperature sensor
1602 * Missing ao_mutex_put in gps_dump
1603 * Compute daytime using GPS as time base
1604 * Pull in a bit more data for filtering the start of the boost
1605 * Log GPS data on pad after boost detect.
1606 * Change barometer conversion code to shrink conversion table
1607 * Change altos build process to support per-product compile-time
1609 * Update .gitignore files
1610 * Quiet make output.
1611 * Add back stack size checking to altos linking phase
1612 * Must install .map files for ao-load to work
1614 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1616 altos (0.6+60+g10d1bbc) unstable; urgency=low
1619 * Use ao_radio_get/ao_radio_put in packet code.
1621 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1623 altos (0.6+58+gbbb152c) unstable; urgency=low
1626 * Re-order config values. Change frequency to cal
1627 * Allow radio calibration to be set from ao-load
1628 * Add --cal to man page
1630 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1632 altos (0.6+53+gcd49847) unstable; urgency=low
1635 * Remove send_serial and serial_baud commands.
1636 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1637 * Add radio calibration configuration.
1639 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1641 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1644 * Change default callsign to "N0CALL"
1646 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1648 altos (0.6+47+g4053309) unstable; urgency=low
1650 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1651 * change home URL in control file to be the AltOS page
1653 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1655 altos (0.6+43+gd6ba07e) unstable; urgency=low
1658 * Decode HDOP data from skytraq GPS
1659 * Document ao-postflight --gps and --kml options.
1660 * Make ao-postflight create filenames using input filenames.
1661 * Make TD print 0000-00-00 for invalid dates.
1662 * Fix --plot arg handling. Add -all option.
1663 * Convert telemetry file GPS satellite information in cc_log_read
1664 * Don't crash if --plot isn't passed on ao-postflight command line
1665 * ao-postflight: compute barometric alt for each GPS position
1666 * ao-postflight: don't try to use missing gps sat data
1667 * Automatically extract flight number for eeprom and telem filenames.
1669 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1671 altos (0.6+32+g87e6f3e) unstable; urgency=low
1674 * fix typo in comment
1677 * Reduce igniter firing time from 500ms to 50ms.
1678 * Add GPS date/time output to ao-postflight.
1679 * Eliminate SiRF state values from ao-view.
1681 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1683 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1686 * Add two-point accelerometer calibration.
1687 * Remove "l" command as ao-dumplong no longer uses it
1688 * Remove "d" command
1689 * Remove "f" command
1690 * Reformat ADC values to show all 16 bits
1691 * ao_flight_test was using accel value for pressure too
1692 * Pass accel calibration over telemetry stream. Telemetry data format
1694 * Add ability to dump eeprom data over radio link.
1695 * In packet master, move USB flush from packet thread to echo thread
1696 * In USB pollchar, wait for packet before re-checking USB out len
1697 * Explicitly use USB I/O routines in packet code
1698 * Flush pending input when switching to remote packet mode
1699 * Stop recording in ao-dumplog after receiving an invalid block
1700 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1701 * Add Watchdog Timer Control register definitions
1702 * Add reboot command.
1703 * Return radio to telemetry settings when packet system closed.
1704 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1705 * Loosen tolerances for main->landed transition
1706 * Provide a dummy 'uninstall' target in the src directory.
1707 * Share telemetry parsing code in cc library.
1708 * Enable telemetry receive in ao_view
1709 * Switch order of serial/flight in ao-postflight summary
1710 * Add flight number to telemetry stream.
1711 * Add date to GPS data, captured from GPRMC packet.
1712 * Stop using SiRF state info.
1714 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1716 altos (0.6) unstable; urgency=low
1719 * Add support for the SkyTraq GPS unit
1720 * Build two versions of TM, one for SiRF, one for SkyTraq
1721 * Save some DSEG space by marking cmd functions __reentrant
1722 * Add ao_wake_task and ao_exit
1723 * Add keyhole-markup generation for ao-postflight.
1724 * Initial packet bits. Just testing transmission
1725 * Add radio carrier command
1726 * Wait for TX to finish sending data
1728 * Remove reason from ao_dma_abort
1729 * Switch packet code from timer thread to ao_alarm
1730 * Use ao_radio_done to wait for TX to completely finish with packet
1731 * Send SYN packet to set sequence numbers
1733 * Do more flushing in packet test code
1734 * Use ao_alarm for ao_delay so it can be easily interrupted
1735 * Poke master to speed up packet rate when things are busy
1736 * No need to wakeup &ao_tick_count now
1737 * Enable packet-based communcation to command processor
1738 * Add more docs to the README file
1739 * Disable interrupts while removing tasks from task list
1740 * Add ao_usb_pollchar to ao.h
1742 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1744 altos (0.5+90+g127c312) unstable; urgency=low
1746 * de-version the libreadline-dev build dependency
1748 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1750 altos (0.5+86+g2de548f) unstable; urgency=low
1752 * automate push of updated and tagged master branch during
1753 debian/rules prebuild
1754 * flush repetitive junk out of debian/changelog, and update the
1756 * add support for tagging git repository on each Debian package build
1758 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1760 altos (0.5+77+gc57bd7f) unstable; urgency=low
1762 * build for Debian from git
1764 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600