1 altos (1.2.9) unstable; urgency=low
3 * test builds for upcoming 1.3 release
5 -- Bdale Garbee <bdale@gag.com> Wed, 18 Dec 2013 12:17:29 -0700
7 altos (1.0.1+3+g93b8f40) unstable; urgency=low
9 * update release process docs
10 * more release process doc updates
12 -- Bdale Garbee <bdale@gag.com> Sun, 28 Aug 2011 13:39:31 -0600
14 altos (1.0.1) unstable; urgency=low
17 * use multimaint-merge to make Debian changelogs less ugly
18 * update TeleMini turnon script now that we've made a stable firmware release
19 * moving git-buildpackage config into .git/ since it is fairly specific to
20 Bdale's build environment, and doesn't need to be in the source package
21 * get ready for a 1.0.1 release
22 * update changelogs for Debian build
23 * fix telemini firmware path name
24 * ignore generated log file
25 * roll release notes version from 1.0 to 1.0.1
26 * roll back packaging changelog for rebuild
29 * altos: Clear callsign on initial config load
31 -- Bdale Garbee <bdale@gag.com> Fri, 26 Aug 2011 10:39:29 -0600
33 altos (1.0) unstable; urgency=low
36 * altos: Lost change that reported flight 0 when log memory was full
37 * altosui: Ancient log files used 'apogee' for 'coast' state
38 * altosui: Add 'On-board Data Logging' indicator to pad tab
41 * update changelogs for Debian build
42 * update changelogs for Debian build
45 * altosui: remove debug printf in pad pane
46 * altosui: Disable 'max flight log' config when there are stored flights
47 * altos: Merge common config code in ao_config.c
48 * Bump version to 0.9.7
49 * altos/altosui: Add ability to disable telemetry/rdf completely
50 * altosui: Clean up command line processing. Add --graph
51 * altos-fat/windows: Check and install Java 1.6 as needed
52 * altosui/windows: Fix a bunch of windows compiler warnings.
53 * altosui: Attempt to make both 32- and 64-bit windows DLLs
54 * doc: Add note about telemetry disable mode to 1.0 release notes
55 * doc: Add Installation Recommendations chapter
56 * altosui: Add a few simple unit conversions
57 * altosui: Capture date/time/serial/flight in AltosFlightStats
58 * altosui: Add date/time/serial/flight to flight stats tab
59 * altosui: Show filename in AltosGraph window
60 * altosui: Add --summary option to dump flight stats to stdout
61 * altosui: Make monitor-idle display correct 'On-board data logging' status
62 * altosui: Can't configure flight log max on TeleMini
63 * altosui: fix 'magic' string to signal end of config data
64 * altosui: Only 'show' config dialog once
65 * altosui: Reset all config data on 'reset' command
66 * altosui: Update mac os X library
67 * libaltos: fix Mac OS X function signatures
68 * altosui: add tool-tips to the button box.
71 * turn off auto-tagging during Debian build
72 * update changelogs for Debian build
73 * rewind changelog to 0.9.6.0 for rebuild
74 * update changelogs for Debian build
77 * altosui: Use system look&feel
78 * Remove stale tools (ao-dumplog, ao-postflight, ao-view)
79 * altosui: Add tool-tips to config dialogs
80 * altosui: Try to get dialogs to look a little better
84 * roll changelog back in prep for another test build
85 * update changelogs for Debian build
86 * add pkg-config to the build deps
87 * prepare for another rebuild
88 * update changelogs for Debian build
91 * altosui: Don't trust companion telemetry record 'channels' count
92 * altosui: Make flight monitor font size configurable
93 * altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
96 * doc tweaks through chap 3
99 * doc: Spelling corrections in altusmetrum.xsl
100 * doc: Document pad-mode 'on-board data logging' indicator
106 * doc: Describe packet command mode a bit better.
107 * doc: Move Packet Command Mode section to System Operations chapter
114 * doc: use 'radio link' to refer to packet command mode
120 * doc: Move updating device firmware section to separate chapter
121 * doc: Updating Firmware is now a separate chapter
127 * doc: Move the remaining command-mode descriptions to the appendix
133 * doc: Describe max flight log, ignite mode and pad orientation
134 * doc: Remove duplicate documentation about max flight log
139 * don't deliver sources.list fragment in official Debian packages
140 * changes in preparation for upload to Debian
141 * ao-view is no longer included in the altos package, so have the
142 old-style Debian menu entry point to altosui instead
143 * rewind packaging changelog to last tagged version
144 * update desktop file for consistency with package section
145 * we need a main category in the desktop file
146 * really, I mean it, no longer deliver the sources.list fragment
147 * add a postinst to remove sources.list.d fragment delivered by old
148 private versions of this package, no longer needed once we have
151 -- Bdale Garbee <bdale@gag.com> Thu, 25 Aug 2011 02:22:21 -0600
153 altos (0.9.6.0) unstable; urgency=low
156 * altos: Correct flight log max on Tm to 5k
157 * altosui: Change button to 'Configure Altimeter'
158 * altos: Remove pad_orientation functions from non-accel devices
159 * altos: Add ability to set arbitrary radio frequency
160 * altosui: Add dialogs to configure 'common' frequencies
161 * altosui: Convert from channels to frequencies
162 * Set version to 0.9.5.0
163 * altosui: altimeter is not spelled altimter
164 * altosui: Pull out BlueTooth support
165 * altos: minor type in comment about accel correction
166 * altosui: Must set radio calibration before radio setting
167 * altosui: A few misc cleanups.
168 * altosui: Have single radio_to_frequency function
169 * altosui: Save frequency after setting it in AltosFlightUI
170 * altosui: Show AltosFrequency in scan results
171 * altosui: Remove debugging printfs from AltosSerial
172 * altosui: Flush radio setting to serial device
173 * altosui: Remove unused AltosConfigData from AltosTelemetryReader
174 * altosui: Reading serial from swing thread only bad if remote
175 * altosui: Make set of telemetries to use while scanning configurable
176 * altosui: Add close button to 'fire' dialog
177 * altos: Switch telemini from v0.1 to v1.0
178 * altosui: Don't export product defs from libaltos
179 * altosui: Ensure serial code tracks reply nesting correctly
180 * altosui: Ship TeleMini v1.0 firmware with fat blobs
181 * Altosui: Add flight statistics tab to graph window
182 * altosui: Add a 'Graph Flight' button to the 'landed' tab
183 * altosui: Prune telemetry file graphs to just the flight
184 * altosui: Plot reasonable data from Tm files
185 * altosui: Move launch-sites.txt file to altusmetrum.org
186 * Bump version to 0.9.6.0
187 * doc: Update altusmetrum.xsl for v1.0 software and TeleMini
188 * doc: Document Ignite Mode and Pad Orientation configuration options
189 * doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
190 * doc: Add telemetry docs to debian/linux/mac/windows packages
191 * doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
192 * doc: Add 1.0 release notes.
193 * altos: Pull igniter pins low as soon as possible at boot time
194 * altos: Apply igniter boot pulse-width reduction to telemini
195 * altos: remove monitor disable stubs from altimeter code
196 * ao-tools: ao-list was crashing with more than 3 devices connected
197 * libaltos: Mis-allocated device list in libaltos
198 * altos: shrink text space from ao_config.c
199 * altos: re-write a bit of GPS parsing code to reduce size
200 * altos/altosui: Report log format in the version command
201 * altos: Don't try to use non-basestations for remote eeprom download
202 * altos: Add SPI-based companion board support
203 * altos: Put SPI in slower mode when talking to companion board
204 * altos: Make sure companion task exits cleanly when done
205 * altos: add the 'L' command to show the status of a linked companion board
206 * altos: Check for companion init packet validity was busted
207 * altosui: Add companion support to the flight UI and CSV conversion
208 * altos: Send SPI message at flight state changes
209 * altos: Send serial/flight to companion board
210 * altos: wait 10s for companion to boot
211 * altosui: Clean up eeprom parsing a bit
212 * altosui: Add support for TeleScience eeprom download
213 * altosui: Devices with log-format can also delete flights
214 * altosui: Eliminate inter-chunk flush_input calls
215 * altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
216 * altos: Correct AO_CONFIG_MINOR from 6 to 7
217 * altos: Reset radio channel to zero when using radio setting
218 * altos: use raw height while waiting for landing
219 * altosui: don't set channel when using radio setting
220 * altosui: Respect storage limits in flight log max config
222 -- Bdale Garbee <bdale@gag.com> Fri, 19 Aug 2011 22:47:25 -0600
224 altos (0.9.4.5) unstable; urgency=low
227 * altosui: Mark empty eeprom records 'invalid', don't generate exception
228 * altosui: Always read whole eeprom block, even at end of flight
229 * altosui: Display eeprom parsing errors to user
230 * Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
233 * src/ao_cmd: Shave off bytes from doc strings
236 * altos: Oops. Lost a couple of commands when merging the doc patch
237 * altosui: Missed jcommon.jar in the Mac OS install image
238 * Bump published version number to 0.9.1
239 * aoview: remove -s option.
242 * ao_intflash: Use internal flash for storage
245 * altos: Make serial, usb, beeper and accelerometer optional components
246 * altos/test: Use ao_convert.c instead of hand-coded pres → alt func
247 * altos/test: Add baro-only flight test program
248 * altos: Start with packet slave running. Turn off in pad mode.
249 * altos: Add TeleMini v1.0
252 * ao_intflash: Avoid overwriting code
255 * altos: Switch LED usage for TeleMini around
256 * altos: Switch pins around for TeleMini
257 * bringup: Add script for telemini
258 * ao-load: Make usb descriptor rewriting optional
259 * altos: oops -- altitude reporting wasn't pausing between signals
260 * altos: Internal flash ops block when running from flash
263 * ignore new flight test file
266 * altos: Add tiny logging for TeleMini/TeleNano
267 * altos: Add kalman filters for baro-only boards
268 * altos: Tiny logging fixes. Scan at start, stop when land or full.
269 * altos: Add TeleNano support
272 * fix up script to work and have reasonable texts
275 * altos: Fix mini/nano default log size to available flash space
276 * altos/test: Add scripts to run lots of flights through the code
277 * altos: Write height values to log for nano/mini
278 * altos: Baro-only boards must not detect launch on accel or speed data
279 * altosui: Add software version to Configure AltosUI dialog
280 * altos: Don't init packet slave on TD. Make slave start optional
281 * altos: Configure packet size from send/recv parameters.
282 * altos: Make telemetry interval more consistent
283 * altos: Split out tiny telemetry from full telemetry
284 * altos: Split telenano main from telemini
285 * altos: The kalman code requires a constant sample rate
286 * altos: New telemetry report format (version 4). Supports tiny telemetry.
287 * altos: Add .sdcdbrc file for teledongle
288 * altos: Add nickle kalman implementation.
289 * altos: Switch telemetrum over to kalman filter
290 * altos: Compute a 'trust' value for the barometer
291 * altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
292 * altos: Clean up some debug stuff in ao_flight.c
293 * altos: Add ao_flight_debug code
294 * altos: Missing parens and some bad arithmetic in the kalman code
295 * altos: Fix up flight code testing
296 * altos: Restore sensible kalman values
297 * altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
298 * altos: Exit flight test at landing. Allow description in test flight list
299 * Add ao_kalman.h to .gitignore
300 * Add description to test flights
301 * altosui: Add support for telemetry version 4
302 * altosui: Add telemetry format menu and preferences
303 * altosui: Remove a bunch of debug printfs from the eeprom manager code
304 * altosui: Add support for downloading TeleMini/TeleNano flight logs
305 * altosui: Remove extra AltosEepromBlock layer
306 * altosui: swing hide/show methods are deprecated
307 * altosui: Allow TM config connection to be canceled.
308 * altos: Variable log rate in full logging code too
309 * altos: full logging must flush pending data before checking state
310 * altosui: Off-by-one error in telemetry format configuration UI
311 * altosui: Allow radio channel to be configured over the radio link
312 * altosui: Tell serial device which frame to use for timeout dialogs
313 * altosui: Handle serial calls from swing thread
314 * altos: Split up flight code into separate flight/sample/kalman bits
315 * altos: Create custom nano flight code
316 * altosui: Clean up packet link connecting dialog
317 * altosui: Make flight log downloading handle 'Connecting...' dialog
318 * altosui: Make deployment testing handle Connecting... dialog
319 * altosui: Display exception messages from swing thread
320 * altosui: Don't display 0000-00-00 for missing flight log dates
321 * altos: ao_sample_preflight was exiting preflight mode immediately
322 * altos: Run RDF beacon after apogee instead of waiting for landing
323 * altos: Enable logging during nano flights
324 * altosui: Parse and export Max flight log value
325 * altosui: Only plot acceleration when present in data file
326 * altos: Reflect ao_flight split in ao_flight_test dependencies
327 * altos: Baro useful ceiling is MSL, not AGL
328 * altos: Make ao_flight_test show true height but report saturated height
329 * altos: Add initial TeleBT code
330 * altos: Add P2SEL_*_MASK defines to cc1111.h
331 * altos: expose set of available stdio values
332 * altos: Provide for a pre-filter on commands
333 * altos: Allow any stdio to be used with packet forwarding
334 * altos: Remove serial monitor command
335 * altos: Make ao_serial_drain public
336 * altos: Clean up usage of serial port for stdio
337 * altos: Clean up serial initialization
338 * altos: Make cmd echo per-connection instead of global
339 * altos: Clean up BT serial communcations
340 * altosui: Add missing AltosTelemetryMap.java file
341 * altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
342 * altosui: Add TeleBT USB device support
343 * altosui: Add low-level Bluetooth APIs
344 * altos/altosui: Log averaged baro sensor data in Tm/Tn
345 * altosui: oops - lost state changes when downloading eeprom data.
346 * altos: Write a few pre-launch samples for Tm/Tn devices
347 * altosui: Add primitive bluetooth device manager UI.
348 * altosui: Create abstract AltosDevice class
349 * altosui: Make AltosBTDevice implement AltosDevice interface
350 * altosui: Make bluetooth dialog modal
351 * altosui: Use persistent list of bluetooth devices for device dialogs
352 * altos: Add delays to bt startup sequence
353 * altosui: Wait two seconds after bluetooth connect XXX
354 * altos: Solidify BT connections
355 * altos: Simplify BT communications
356 * altos: Remove bt debug command
357 * altos: remove BT logging code
358 * altosui: Eliminate ao_cmd_filter hook
359 * altosui: Make flight data download work through TeleBT
360 * altos: add telebt-v0.0 Makefile
361 * altosui: Separate out flash debug code to separate thread
362 * altosui: Fix TeleBT name in flight monitor title
363 * altosui: Display reader name (usually the device) when an I/O error occurs
364 * altosui: Move AltosIgniteUI device open out of Swing thread
365 * altosui: Fix BT manage dialog so that the device lists resize
366 * altos: Add preliminary telebt v0.1 defines
369 * first cut at a telebt turn on script
372 * altos: Add telebt-v0.1 to Makefile
373 * altos: Use USART configuration 1 with flow control for TBT
374 * altos: Fix BT link status pin for real TBT hardware
375 * altos: pull TBT v0.1 ser_reset line low
376 * altos: Add beeper to TBT v0.1
377 * altos: Debugging TBT issues -- check pin configuration after boot
378 * altos: Initialize beeper for telebt
379 * altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
380 * altos: clear CPU port 1 interrupt flag when handled
381 * Revert "altos: Debugging TBT issues -- check pin configuration after boot"
382 * Switch version to 0.9.4
383 * altosui: Handle old TeleDongle receiving kalman telemetry packets
384 * altos: Rename telemetry to telemetry_orig
385 * altos: Add arbitrary telemetry packet monitoring
386 * altos: Add checksum to TELEM output lines
387 * altos: Start adding new telemetry frame definitions
388 * altos: ao_radio_recv needs byte count *including* rssi and status
389 * altosui: Support raw telemetry from TeleDongle
390 * doc: Add telemetry format description
391 * doc: Complete initial telemetry description
392 * doc: Fix a few minor telemetry doc mistakes
393 * Version strings must be < 8 bytes long
394 * altos: teledongle does not need ao_packet_slave.c
395 * altos: Shrink const space in ao_config
396 * altos: Add sat info to GPS report command
397 * altos: Shrink help text
398 * altos: Add split telemetry code
399 * altos: Complete new telemetry switchover
400 * altosui: Parse remaining standard telemetry packets
401 * doc: Chang Config and Location packets
402 * altos: Adapt to changes in telemetry Configuration packet
403 * doc: Add section about TeleDongle USB line format
404 * altosui: Elide nul bytes at end of telemetry string values
405 * altosui: Elide missing values from graphs
406 * altosui: Add main/drogue voltages to default graph
407 * altosui: Remove debug printf.
408 * altosui: Compress telemetry records marked with the same time
409 * altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
410 * altos: Shrink ao_config_callsign_set
411 * altos: Shrink ao_add_task by rolling up a memset loop
412 * altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
413 * altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
414 * altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
415 * altos: Switch ao_report.c __xdata to __pdata
416 * altos: Switch ao_rssi.c __xdata to __pdata
417 * altos: Switch ao_sample.c __xdata to __pdata
418 * altos: Switch ao_serial.c __xdata to __pdata
419 * altos: Switch ao_stdio.c __data to __pdata
420 * altos: Switch ao_telemetry.c __xdata to __pdata
421 * altos: Switch ao_usb.c __xdata to __pdata
422 * altos: Switch const for __code in struct ao_cmds
423 * altos: switch ao_cmd __xdata to __pdata
424 * altos: Switch ao_config.c __xdata to __pdata
425 * altos: Switch ao_dbg.c __xdata to __pdata
426 * altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
427 * altos: Switch flash drivers __xdata to __pdata
428 * altos: Switch Tm and Tn to common telemetry code
429 * altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
430 * altos: Ensure low-rate telem packets interleave with sensor telem packets
431 * altos: product defines are always in ao_product.h
432 * altosui: Build device constants into .java code
433 * altosui: Don't show missing igniter and gps values
434 * altos: new versions of sdcc require __ prefixes for custom keywords
435 * Set version to 0.9.4.3 for Bdale 2011-7-16 flights
436 * altosui: Start adding support for scanning radio for available devices
437 * altosui: Pop up monitor window from scan dialog
438 * altosui: Remove debugging printf from AltosLog
439 * altosui: Configuration telemetry record includes flight number
440 * altosui: Finish radio scanning UI
441 * altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
442 * altosui: Initialize channel and telemetry before use in ScanUI
443 * altosui: Set 'seen' bits in legacy telemetry packet reader
444 * altosui: Add map preloading GUI
445 * altosui: Try to avoid resize weirdness with map preloading
446 * altosui: Flush telemetry lines before starting to watch for scan results
447 * altosui: Display full map preload area in view.
448 * altosui: Remove a bunch of sitemap debugging printfs
451 * altosui: Make sure degree and minute values are visible (map preload)
454 * Set version to 0.9.4.4
455 * altos, altosui: Add igniter mode (dual, apogee, main)
456 * altosui: Download list of site locations for map preloading
457 * altosui: Add launch-sites.txt
458 * altosui: Add a bunch more site locations
459 * altosui: Mark preload site location with red circles (like launch)
460 * Fix NCR Pawnee location
461 * Add HARA Bragg Farms site
462 * altosui: Change continutity colors to yellow/magenta
463 * altos: Add ability to read new TELEM files to ao_flight_test
464 * altos: Average height values for landing detection
465 * altos: Reduce height averaging filter time constant
466 * altos: Require sequencing through 'main' state before landing
467 * altosui: Standard text field in flight UI needs more width (now 20)
468 * altosui: Parse accel cal from 'c s' command
469 * altosui: Simple timeouts don't work with query data
470 * altosui: Add idle monitor dialog
471 * altos/altosui: Add pad orientation configure option
474 * update version for a Bdale build for use turning on TeleMini v1.0
475 * simplify version in last changelog entry so git-dch is less confused
476 * update changelogs for Debian build
477 * update changelogs for Debian build
478 * stop doing automatic tag push during builds
479 * build depend on bluetooth dev package
480 * clean up all existing lintian warnings
481 * rewind changelog for re-build of 0.9.4.5
483 -- Bdale Garbee <bdale@gag.com> Mon, 08 Aug 2011 09:37:04 -0600
485 altos (0.9.1) unstable; urgency=low
488 * ao-load: fix usage message to note that '=' is required for options
489 * altos/test: Add dependencies in the Makefile for ao_flight_test
490 * altos/test: auto-configure acceleration parameters from the log file
493 * ao_radio: generalise setup of packet size
494 * src/ao_gps_skytraq: simplify parsing code
495 * src/ao_gps_skytraq.c: Update logging rate to 10Hz
498 * tie bringup scripts to Bdale's bench TeleDongle
500 -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
502 altos (0.9) unstable; urgency=low
506 * update changelogs for Debian build
507 * update turnon script to prefer TeleDongle as programmer
510 * altos: Program default flight log max value for new boards
512 -- Bdale Garbee <bdale@gag.com> Wed, 19 Jan 2011 12:46:47 -0700
514 altos (0.8.1+81+g4ae724f) unstable; urgency=low
516 * we need an install target to prevent parent dir make from failing
518 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:55:36 -0700
520 altos (0.8.1+79+g9a5666f) unstable; urgency=low
523 * doc: Don't delete telemetrum-outline.pdf
524 * doc: Add v0.9 features from altosui to documentation.
527 * add 0.9 revision entry, with caveat about telemetry format change
528 * freshen copyright year
531 * fat: Add firmware for v1.1 and docs to mac/windows/linux installers
532 * fat: Add docs to Linux package
533 * doc: Build with 'make all' from top level. Build with 'make fat'
535 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 23:47:52 -0700
537 altos (0.8.1+71+gda42f40) unstable; urgency=low
540 * doc: Add telemetrum mounting template in svg and pdf forms
543 * Re-order and re-arrange eeprom download dialog
544 * Convert EepromSelect dialog to use a GridBag
545 * Close serial port if Download/Delete dialog is cancelled.
548 * altosui: Reset eeprom download instance variables before reading
550 * altosui: Make serial debug more complete and accurate
551 * altosui: Use long input flush timeout when remote.
552 * altosui: Remove debug message when eeprom downloads are complete.
553 * altosui: Ensure serial device is closed after eeprom download
555 * altosui: Require 4 sats to light up the 'GPS locked' light.
556 * doc: inkscape tracks the filename inside the document
557 * altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
558 * altos: Flush log when full
561 * altos: Restructure skytraq NMEA parsing code to save some space
564 * altos: average 512 accel/baro samples at startup instead of 1000
567 * altos: Added check for an accel value above 1.5g
568 * altos: Added check for out of bounds accel
571 * altos: Add DATA_TO_XDATA to linux test harness
572 * altosui: Remove spurious colons from eeprom selection headers
575 * Rework invalid accel cal detection code
578 * altos: Auto-calibrate linux-based flight testing code
579 * altos: Ensure flight code gets first crack at new ADC data
580 * altos: Sample the accelerometer reference voltage on v1.1 boards
581 * altos: Optimize fetching of ADC data in flight code
582 * altos: Use 5V reference data to correct accelerometer measurements.
583 * doc: Remove mention of ao_wake_task
586 * update documentation to reflect reality that modifying a board for
587 separate pyro battery is not trivial
589 -- Bdale Garbee <bdale@gag.com> Tue, 18 Jan 2011 17:26:33 -0700
591 altos (0.8.1+42+g646e192) unstable; urgency=low
594 * altosui: Show dialog after successful delete or when no flights
595 * altosui: Ensure serial line is flushed after disabling remote link
596 * altosui: Add preference for serial debugging.
598 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 18:00:51 -0700
600 altos (0.8.1+37+g97b1ca9) unstable; urgency=low
603 * altos: Add configuration parameter for maximum flight log size
604 * altos: support storage of multiple flights.
605 * altos: Speed up at45 and 25lc erase speeds
606 * altos: white space fix
607 * altos: report flight log offsets in hex block numbers instead of
609 * altos: ensure erase mark is written when erasing flights
612 * altos: Optimize Morse code generation
615 * altos: Check requested log max size against available space
616 * altos: Check for full log and complain
617 * altosui: Add configuration of flight log size
620 * altos: Remove unused accel_vel_mach and accel_vel_boost variables
621 * altos: Remove redundant initialization of ao_interval variables
624 * altosui: Split eeprom download code apart
625 * altos: oops -- 'e' command was only showing 7 of the 8 bytes per
627 * altosui: Add support for parsing list of flights from the 'l'
629 * altosui: Add eeprom 'manage' ui to download and delete multiple
631 * altos: check for valid flight number in ao_log_delete
633 -- Bdale Garbee <bdale@gag.com> Fri, 14 Jan 2011 14:30:37 -0700
635 altos (0.8.1+18+g408a3e0) unstable; urgency=low
638 * altosui: move maps to subdir, fix E/W mismatch
641 * altos: clean up radio abort paths. Share radio code.
642 * altos: eliminate ao_wake_task
643 * windows: Add compatibility IDs to telemetrum.inf
644 * windows: Update NSIS installer file to use compatibility IDs
645 * altos: Split out SPI driver.
646 * altos: Add telemetrum-v1.1 directory
647 * altos: packet and usb i/o routines use 'char', not 'uint8_t'
648 * altos: Simplify storage API
649 * altos: Require manual flight erasing.
650 * altos: Move common storage code to ao_storage.c. Add M25P80 driver
651 * altos: Rip out 'optimization' in ao_log_scan
652 * altos: Mark end of available flight list with 'done' to make the UI
654 -- Bdale Garbee <bdale@gag.com> Fri, 07 Jan 2011 00:51:41 -0700
656 altos (0.8.1+4+gea95c06) unstable; urgency=low
658 * fix symlink paths in rules file
660 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:14:24 -0700
662 altos (0.8.1+2+gea7130e) unstable; urgency=low
664 * modify Debian package build to deliver one copy of background.png
667 -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 00:03:14 -0700
669 altos (0.8.1) unstable; urgency=low
672 * moved doc dir in web content to AltOS tree
673 * fix publish target in doc/Makefile
674 * fix section layering
675 * fix an Altos vs Altus typo in the docs
676 * adding Bdale's release process document to the source tree
679 * windows: Add jfreechart.jar and jcommon.jar to windows install image
680 * Move "Releasing" to top level
681 * Add minimal release testing plan to Releasing
686 -- Bdale Garbee <bdale@gag.com> Mon, 29 Nov 2010 21:46:54 -0700
688 altos (0.8) unstable; urgency=low
691 * altosui: Correct windows hardware IDs for nsis installer file
692 * windows: try harder to get windows install to work
693 * windows: remove some non-existent .inf file section references
694 * windows: more .inf file hacking
695 * windows: Bump .inf file version
698 * declaring 0.8 released
699 * update changelogs for Debian build
700 * update changelogs for Debian build
701 * rewind changelog to recover from stupid build failure
703 -- Bdale Garbee <bdale@gag.com> Sun, 28 Nov 2010 18:32:12 -0700
705 altos (0.7.1+168+gcb08bc2) unstable; urgency=low
708 * altosui: Split out flight monitoring to separate window
709 * altosui: Create buttons for main actions
710 * altosui: Fix channel setting at serial open time
711 * altosui: Fix more calls to AltosPreferences.channel()
712 * altosui: Create abstract interface for flight data display
713 * altosui: Add tab UI with 'pad' mode.
714 * altosui: Add ascent, descent and landed tabs
717 * Updated PKGBUILD-git.altos
720 * altos: Use grey leds when unlit - easier to see
723 * use value_font for values
724 * add --replay command line argument
725 * read preferences for --replay
726 * reduce font size for FlightInfoTable
727 * use grayled.png for off
728 * add compass bearing to voice output
729 * add compass bearing during descent
730 * add site map tab, at least for QRS launches
732 * make infotable scrollable, revert its fontsize to 14
733 * pull up maps for arbitrary locations
734 * better error behaviour if no map
737 * first cut at instructions on how to re-flash TM and TD devices based
739 * fold in content from Keith's email on the re-flashing subject
742 * altosui: Add RF calibration to TeleMetrum config dialog
745 * AltosTelemetryReader: actually open serial port
746 * AltosSiteMap: add targeting circles around landing site
749 * continuing to work on the docs
752 * altosui: Eliminate unncessary import altosui lines
753 * altosui: Open serial device at 'new' time. Prohibit duplicate opens.
754 * altosui: Replace flight status table with labels, fix resize.
755 * altosui: With --replay option, exit when replay window is closed
756 * altosui: oops, missed a file in the previous commit
757 * altosui: eliminate menu bar, moving elements to buttons.
758 * altosui: add reboot button to telemetrum configuration UI
761 * add a paragraph about forcing TM back to idle mode if an accel cal
765 * altosui: Add callsign configuration in AltosUI configuration dialog
766 * altosui: Cleanup flight UI layout
767 * altosui: Add igniter status to ascent and descent tabs
770 * altosui: tile site maps
771 * AltosSiteMapTile: autoscale to about 2 nmi per tile
772 * AltosSiteMapTile: adjust centering calculation
773 * AltosSiteMapTile: adjust scale to 1 nmi per tile
776 * altosui: Add igniter ground testing code
777 * altosui: Unify datafile selection to AltosDataChooser
778 * altosui: Clean up global AltosUI configuration settings dialog
779 * doc: Add preliminary altosui documentation
780 * doc: git ignore generated doc files
781 * doc: Document the 'Flash Image' operation.
782 * altosui: Use timeouts to recover from broken packet links.
785 * update turnon scripts to use stashed copies of stable release
789 * altosui: switch channel selector to combo box. Shorten displayed
791 * altosui: When switching log files, don't terminate log thread
792 * altosui: calling thread.interrupt with null thread doesn't work well
793 * altosui: Initialize display thread state in constructor instead of
795 * altosui: Fix channel changing in flight UI to actually work
798 * AltosSiteMap: add autoscroll and grabndrag scroll
799 * AltosSiteMapTile: seperate map and drawing layers
800 * AltosSiteMap: automatic fetching of map data
801 * AltosSiteMapTile: draw boost circle as well as landed
802 * AltosAscent/Descent: tidy up layout
803 * AltosDescent: switch elev from height to range
809 * AltosSiteMap: major refactoring
813 * altosui: change descent tab formatting to four columns
816 * AltosSiteMap: be more polite about preferred size
820 * altosui: Rewrite info table to mix with scroll pane well. Fix
824 * AltosSiteMap: better gps check, lower zoom
827 * altosui: Set site map flight path lines to 6 pixels anti-aliased.
830 * AltosSiteMap: explain tile size better
831 * AltosSiteMap: extend map if rocket goes far away
832 * AltosSiteMap: try to get new tile construction right
833 * AltosSiteMap: thread safe tile addition
834 * AltosSiteMap: refactor tile collection
835 * AltosSiteMap: never accept 0,0 as lat/long
836 * AltosSiteMap: limit nr of tiles to 200x200
839 * altosui: When fixing eeprom gps time information, make GPS data
843 * AltosSiteMap: ensure buffer around active tile
844 * altosui: improve sitemap scrolling behaviour
845 * altosui: keep sitemap more centred on rocket
848 * altos: Add on/off modes to 'C' command
851 * Added PKGBUILDs for deps into contribs
854 * altosui: Close serial port when debug link fails
855 * altos: assume igniter worked.
858 * add a rudimentary --help for command line use
861 * doc: Add internal documentation for AltOS
864 * altosui: don't switch away from user selected tab
865 * altosui: sitemap uses rocket gps if no pad gps
868 * merge Keith's AltosUI documention into "the big book"
869 * lose the placeholder on how GPS works, as it's going to be a
872 * altos: remove unused variable from ao_igniter
873 * altos: Don't abort radio transmissions with ao_radio_abort
874 * altos: Make radio test command careful with the radio mutex.
875 * altosui: Make AltosSerial.flush_input keep reading while non-empty
876 * altosui: New AltosSerial.set_radio function sets channel/call
877 * altosui: Disable radio configation over packet link.
878 * altosui: Let people fire igniters that don't read as 'ready'
879 * altosui: Make sure packet mode is turned off when the connection
883 * docs: Document altosui "Graph Data" button
886 * Move altosui to the top level, placing libaltos inside it.
889 * doc: Document altosui "Site Map" tab
892 * Missing change to top level Makefile to build altosui
895 * fix missing section close in Site Map content
897 * manually fold in documentation work from the master branch
900 * doc: Reformat altos to use sections for each function
901 * doc: Add more authors, fix URL formatting, note that AltosUI
903 * doc: Rename telemetrum-doc as altusmetrum
907 -- Bdale Garbee <bdale@gag.com> Thu, 25 Nov 2010 01:10:18 -0700
909 altos (0.7.1+36+g811ced6) unstable; urgency=low
912 * remove the csv build dep, as that code will be abandoned
915 * altosui: Remove ability to graph data in .csv files
916 * altosui: Separate out jfreechart and jcommon directories
918 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 17:47:32 -0600
920 altos (0.7.1+32+g8103432) unstable; urgency=low
922 * add build-dep on libcsv-java
924 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:25:57 -0600
926 altos (0.7.1+28+gd8a2f4c) unstable; urgency=low
929 * make the column headers comma separated, too, so they align with the
933 * altosui: set default .csv file name in file save dialog
934 * altosui: Remember directory containing firmware files
938 * Add JFreeChart to Makefile.am
941 * altosui: Use recorded ground acceleration when reading eeprom files
942 * altosui: Write raw sensor data to .csv files
943 * altosui: Factor some UI elements into separate classes
944 * altosui: remove unused ReplayThread wrapper classes
945 * altosui: Require 4 sats for 'good' GPS data
946 * altosui: Create iterables for log file scanning. Split out display
948 * altosui: .CSV output: add link quality, gps hdop and sat C/N0
950 * altosui: Deal with eeprom dates going backwards across wrap
953 * Hax0r graphing to support telem/eeprom files
956 * altosui: use Altos constants in graphing code
959 * Add callsign/serial/flight to graph title
962 * altosui: Add KML file export.
965 * add build dep on jfreechart lib
967 -- Bdale Garbee <bdale@gag.com> Wed, 06 Oct 2010 16:19:12 -0600
969 altos (0.7.1) unstable; urgency=low
972 * Add firmware and libaltos to 'fat' target at top-level
973 * altosui: Remove some debug printfs.
974 * altosui: libaltos.so is built with libtool -- it's in
976 * Add --with-fat-dir configure option to publish finished stand-alone
978 * altosui: Fix telemetry file reader to handle tick count wrapping
979 * altosui: Remove debug printfs from AltosTelemetryReader
980 * altosui: Fill in time value of last Eeprom record read from file
981 * altosui: Stop parsing eeprom file after hitting 'landed' state
983 -- Bdale Garbee <bdale@gag.com> Fri, 10 Sep 2010 00:09:02 -0600
985 altos (0.7+96+g48f5799) unstable; urgency=low
988 * altosui: conflating USB product and vendor IDs is a bad idea
990 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 21:29:13 -0600
992 altos (0.7+94+g1ac3d7e) unstable; urgency=low
994 * initial cut at an altosui man page
996 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:34:38 -0600
998 altos (0.7+92+g0ea7576) unstable; urgency=low
1001 * handle versioning of ihx files (poorly) by just wildcarding the file
1005 * altosui: Need to have JVM include path substituted into libaltos
1007 * altosui: Store libaltos.so in $(libdir)/altos
1008 * altosui: Display error dialog when AltOS JNI library can't be loaded
1010 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 20:05:44 -0600
1012 altos (0.7+86+g6c0ae7e) unstable; urgency=low
1015 * altosui: Add explicit requirement to create classes directory
1016 * altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and
1018 * altosui: hack to make JAVAROOT directory get created before javac
1020 * altosui: remove FATJAR from all-local to avoid building fat .jar
1024 * add libtool to build deps
1027 * altosui: Add windows installer build using 'nsis'
1028 * altosui: ignore built files
1029 * altosui: oops. renamed the nsis file to altos-windows.nsi
1030 * icon: add some icons for application programs
1031 * altosui: Add icons to application and Windows menus.
1032 * Use autotools for altosui and libaltos
1033 * altos: add some SDCDB config files
1034 * Ignore libtool files.
1035 * Add version numbers to released files. Set version to 0.7.1
1036 * Add top-level 'fat' target to aid building distribution files
1037 * altosui: Fix windows installer to ship correct files
1038 * altosui: Fix up Mac OSX .zip file
1039 * altosui: Fix linux fat distribution
1040 * altosui: Return AO_LOG_INVALID instead of exception for eeprom files
1041 * altosui: Remove debugging printf from AltosEepromReader
1042 * altosui: Eeprom files contain only one date; save it.
1043 * altosui: Add elevation and range data to main display
1044 * altosui: When replay thread is interrupted, don't make final report
1045 * altosui: Start idle thread after the rocket leaves the pad
1046 * altosui: Add AltosVoice.drain() to wait for queued speech to finish
1047 * altosui: Prevent voice altitude data from queueing up
1048 * altosui: Use local .class files in the classpath
1049 * altosui: Record flight number when scanning file, not when running
1050 * altosui: eeprom files place 'boost' time in the flight number
1052 * altosui: ensure that 'altosui' script is installed. Pass arguments
1055 -- Bdale Garbee <bdale@gag.com> Thu, 09 Sep 2010 15:43:28 -0600
1057 altos (0.7+53+g59798c6) unstable; urgency=low
1060 * altosui: Abort flashing if debug port isn't working
1061 * altosui: allow flashing to be canceled from the rom config dialog
1062 * altosui: Hide internal rom config UI helper function
1063 * altosui: Remove some debug printfs from AltosRomconfig class
1064 * altosui: Post error dialog on invalid ROM config values.
1065 * altosui: build Mac OS .zip file to include paths
1066 * altosui: Report telemetry CRC errors in UI
1067 * altosui: Deal with altos bug setting radio channel while monitoring
1068 * altosui: Allow 'connect to device' when already connected
1069 * Revert "altosui: Deal with altos bug setting radio channel while
1071 * altosui: Must flush serial line after configuring for telemetry
1072 * altosui: Catch I/O errors on telemetry device, report to user
1074 -- Bdale Garbee <bdale@gag.com> Sat, 04 Sep 2010 00:46:12 -0400
1076 altos (0.7+40+g59a40f6) unstable; urgency=low
1079 * add distclean targets to libaltos and altosui to all Debian package
1080 to build, and clean up other distclean content as needed
1083 * altosui: missed AltosReader.class in the Makefile
1084 * altos: Bounds check Skytraq GPS tracking data array
1085 * altosui: Remove Manifest.txt from git repo as it's built now
1087 -- Bdale Garbee <bdale@gag.com> Thu, 02 Sep 2010 00:44:15 -0400
1089 altos (0.7+28+gd006c5e) unstable; urgency=low
1091 * add runtime dependencies for altos binary package
1093 -- Bdale Garbee <bdale@gag.com> Tue, 31 Aug 2010 00:20:00 -0400
1095 altos (0.7+26+gc35632e) unstable; urgency=low
1097 * don't build all the "fat" jar deliverables by default
1099 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:37:40 -0600
1101 altos (0.7+23+g25764fc) unstable; urgency=low
1104 * fix up for an 0.7 release
1105 * update changelogs for Debian build
1108 * libaltos: AltusMetrum devices use more than one USB ID.
1109 * altosui: provide separate flush_input/flush_output for serial. deal
1110 with monitor automatically
1111 * altosui: discard invalid lines while reading Eeprom flight data
1112 * libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
1113 * libaltos: Missing OS_LDFLAGS on cjnitest build
1114 * libaltos: cjnitest needs altos_flush now
1115 * altos: flush pending output when terminating packet mode
1116 * altos: Abort radio harder when terminating packet mode.
1117 * altos: shut down packet mode cleanly
1118 * libaltos: Fix windows build.
1119 * libaltos: Improve Makefile
1120 * Update telemetrum.inf to include all current USB ids.
1121 * libaltos: Add pre-built Mac OS X libaltos.dylib
1122 * libaltos: Add pre-built Windows .dll
1123 * altos: Windows sends USB Out packets of 0 length. Ack them.
1124 * libaltos: Use overlapped I/O on windows
1125 * altosui: Build linux, mac and windows archives on Linux
1126 * altosui: build debian-style altosui too
1127 * altosui: Devices with USB id 0x000a always get listed
1130 * continue even if rm's don't have anything to do
1131 * make invocation of 'install' pathless to work on more Unix variants
1132 * add a .gitattributes file, configuring the Mac and Windows binary
1135 -- Bdale Garbee <bdale@gag.com> Mon, 30 Aug 2010 19:07:13 -0600
1137 altos (0.7) unstable; urgency=low
1139 * update changelogs for Debian build
1140 * fix up for an 0.7 release
1142 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 22:25:38 -0600
1144 altos (0.6+375+g0bd4cc0) unstable; urgency=low
1146 * fix path to installed shared library
1148 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 13:13:14 -0600
1150 altos (0.6+373+gcf65c6b) unstable; urgency=low
1153 * altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos
1155 * altosui: Capture config and version info in .eeprom files
1156 * altosui: Merge gps date and time classes into gps class
1157 * altosui: Clear displayed data rows as needed.
1158 * altosui: Split status and info panels into separate files
1159 * altosui: Explicitly initialize Altos class
1160 * altosui: Split flight record out of telemetry class
1161 * altosui: Compute flight state from eeprom data
1162 * altosui: Add comments to Eeprom reader
1163 * altos: add callsign to packet mode, increase payload to 64 bytes
1164 * altosui: Start adding code to write csv files from eeprom/telem
1166 * ao-dumplog: add --channel option (for use with -R option)
1167 * libaltos: integrate Windows support.
1168 * altosui: Select devices by USB vendor/product ID.
1169 * altos: Define USB product ID in per-product Makefile.defs file
1170 * altosui: Make teledongle callsign configurable
1171 * altosui: Add TeleMetrum configuration
1172 * altosui: Set callsign when fetching eeprom data over the air
1175 * add freetts as a build dep
1176 * working on java packaging details
1179 * altosui: Add .ihx file reading code and stub out flashing UI
1180 * altosui: Add debug dongle API, split flash UI out
1181 * ao-dumplog: Fix --remote and --channel options to actually work
1182 * altosui: pad TM config dialog values to avoid clipping descenders
1183 * libaltos: use pipe to wake up getchar on close. use mutexes
1184 * altosui: Add lots more cc1111 debug interface functions
1185 * altosui: remove debug printf from AltosHexfile
1186 * altosui: flush serial output before waiting for reply
1187 * altosui: Remove debug printf from AltosRomconfig
1188 * altosui: Finish device programming code
1189 * altos: Place rom config variables in fixed location
1190 * altosui: make default Manifest look for built-in freetts
1191 * altosui: Separate out log file choosing dialog to share with CSV
1193 * altosui: refactor logfile chooser dialog to share more code
1194 * altosui: Add ability to create CSV file from telem or eeprom files
1195 * altosui: disable radio monitoring while using serial line for
1197 * altosui: Delay mapping Flash UI until flashing actually starts
1198 * altosui: fetch existing romconfig for flashing
1199 * altosui: always display romconfig ui while flashing
1200 * altosui: write USB serial number string while flashing
1201 * altosui: flush replies from serial link when entering debug mode
1202 * altos: always rebuild ao_product.c to track git version
1203 * altos: print GPS state flags in GPS 'g' command
1204 * altos: mark gps date written only after it gets into eeprom
1205 * altosui: Move number parsing code to Altos general class
1206 * altosui: Add AltosGreatCircle constructors
1207 * altosui: add rssi and distance/dir from pad to CSV files
1208 * altosui: AltosEepromReader was mis-setting boost tick
1209 * altosui: Add support for old (version < 3) telemetry files
1210 * altosui: Serial line is in UTF-8 encoding. Deal with it.
1211 * altosui: When parsing saved telem files, errors shouldn't abort file
1212 * altosui: Remove debug printf from AltosState.java
1213 * altosui: command line args are converted to csv format
1214 * altos: prepare for sdcc 2.9.1
1217 * add a dummy install target
1218 * lose the prebuild hook for now while I'm fumbling
1219 * add install target for libaltos
1220 * add an install target for altosui
1223 * altosui: add elevation and range information
1226 * fix up the wrapper's path to the jar file
1227 * update Debian standards version
1228 * fix permissions on installed jar file, switch from ao-view to
1230 * install altosui man page
1231 * fix man page delivery path
1232 * Revert "lose the prebuild hook for now while I'm fumbling"
1234 -- Bdale Garbee <bdale@gag.com> Fri, 27 Aug 2010 12:40:04 -0600
1236 altos (0.6+303+gb6da90b) unstable; urgency=low
1238 * add freetts as a build dep
1239 * move to science menu
1240 * working on java packaging details
1242 -- Bdale Garbee <bdale@gag.com> Wed, 11 Aug 2010 22:11:28 -0400
1244 altos (0.6+292+g8fc261c) unstable; urgency=low
1246 * see if my new freetts package works
1248 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
1250 altos (0.6+290+g7877496) unstable; urgency=low
1253 * altosui: check for closed serial device before reading
1254 * altosui: Remove unnecessary freetts .jar files
1255 * altosui: Close serial, join reader thread, free altos_file
1256 * altosui: remove debug printf
1257 * libaltos: build with java src encoding UTF8
1258 * altosui: construct Darwin application directory
1259 * Add Mac OS X packaging bits
1260 * altosui: Switch eeprom extension back to .eeprom
1261 * Moved Mac OS packaging to altosui dir
1262 * altosui: remove option to install to alternate volume
1263 * Make altosui test script executable
1265 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
1267 altos (0.6+277+gd184819) unstable; urgency=low
1270 * fix text since TM only has one led to blink
1271 * add swig as a build dep
1272 * add a jdk to the build deps
1275 * When the EP0 IN buffer is full, don't panic, just skip sending
1277 * Add libaltos which talks to USB connected altos devices
1278 * Switch AltosUI to libaltos for device access
1279 * Present list of altos devices in nice format
1281 * Re-enable Linux support for altosui.
1282 * Darwin doesn't have strndup.
1283 * libaltos needs -I. on all systems
1284 * libaltos: make clean remove all built files
1285 * libaltos: build fat 10.5-compatible library
1286 * Add Mac OS X packaging files for altosui
1287 * Add application icons for Mac OS X
1288 * Clean up altosui build a bit
1289 * Remove directories as .class file dependencies; it makes them get
1290 rebuilt all the time
1291 * Java clean ups -- use varargs where possible, remove
1293 * Java voice reporting cleanups.
1294 * Force java source encoding to UTF-8
1295 * Make ao_log_data re-entrant as it is used for both sensor and GPS
1297 * altosui: Catch errors opening USB devices. Limit list to relevant
1299 * Make voice and channel menus work.
1300 * Add voice test command for help in adjusting volume.
1301 * Remove debug printf
1302 * altosui: Add eeprom data capture function. No UI yet.
1303 * altosui: Add progress bar for eeprom downloading status
1304 * altosui: Fix Save flight data monitor layout, add cancel
1305 * altosui: Replace device dialog. Center eeprom monitor.
1306 * altosui: report rocket ground bearing at landing only if known
1307 * Reset GPS ready status when GPS comes unlocked on the pad
1309 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
1311 altos (0.6+236+gcd8aa79) unstable; urgency=low
1314 * Telemetry code was mis-computing RSSI
1315 * Switch DBG pins to GPIO when using any debug commands. Reboot to
1319 * significant documentation update
1320 * add build dep for sndfile
1321 * reflect documentation file name change
1322 * update to latest Debian standards version
1324 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
1326 altos (0.6+224+g4766b13) unstable; urgency=low
1329 * documentation updates from Bob
1332 * Extension to KML output format, and minor bug fix
1335 * ao-view: disable radio telemetry monitoring during channel change
1336 * Add special code for USB panic's.
1337 * ao-postflight: was walking off state.data array
1338 * Abort any in-progress radio operation when changing radio channel
1340 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
1342 altos (0.6+214+g16c4cae) unstable; urgency=low
1345 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
1346 * merge a derivative of Bob Finch's mere mortals guide as getting started
1347 * merge the altusmetrum-themes package
1350 * Fix telemetrum.inf, tested by Adrian and Keithp
1351 * Finish basic flight monitoring UI with voice using FreeTTS
1353 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
1355 altos (0.6+204+g6bd8513) unstable; urgency=low
1357 * lose the quotes since they apparently aren't necessary
1359 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
1361 altos (0.6+202+gae6854d) unstable; urgency=low
1363 * update desktop file for conformance with current standards
1365 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
1367 altos (0.6+200+g68eaaa6) unstable; urgency=low
1369 * add initial package build scripts for Arch Linux from Bob Finch
1370 * add desktop file provided by Bob Finch
1372 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
1374 altos (0.6+195+gcde60f1) unstable; urgency=low
1376 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
1378 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
1380 altos (0.6+193+g314d27a) unstable; urgency=low
1383 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
1385 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
1387 altos (0.6+190+g8b6767e) unstable; urgency=low
1390 * Fix all stdio reading functions to be __critical
1391 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
1393 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
1395 altos (0.6+187+g8702f49) unstable; urgency=low
1398 * more text created during SFO->DEN flight
1399 * initial attempt at a telemetrum turn on script .. needs work
1402 * Revert "Add optional 's' command to packet slave to enable/disable
1404 * Disable interrupts while reading from stdin
1406 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
1408 altos (0.6+180+g99094f0) unstable; urgency=low
1411 * Increase reset switch time to 100ms
1412 * Add optional 's' command to packet slave to enable/disable slave
1414 * More ALtosUI changes
1415 * Autodetect flite voice registration function
1418 * capture work done on SFO->DEN flight
1419 * add some RF usage information from an email reply sent today, and
1422 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
1424 altos (0.6+171+g9394393) unstable; urgency=low
1430 * Only have the slave return a packet if it received one.
1432 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
1434 altos (0.6+168+gc0ee1ae) unstable; urgency=low
1437 * INSTALL file changed by auto tools
1440 * libflite may forget to reference libasound
1442 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
1444 altos (0.6+164+g5c3b6e2) unstable; urgency=low
1447 * Start adding java-based UI
1448 * Add telemetry data parsing code
1449 * Add Windows install .inf file
1450 * Fix windows install file
1451 * Add telem parsing code
1452 * Steal C code from ao-view
1453 * Display table of flight info. gps is not working yet though
1454 * Fix up table formatting
1457 * Clean up GPS data formatting
1458 * Report current gps nsat, not last locked nsat
1459 * Remove GPS data missing from skytraq. Save max height/accel/speed
1460 * Remove unused cell renderer class
1462 * Use RXTX for serial comm. Add logdir preference saving
1463 * Make ao_radio_idle keep trying to get the radio to idle.
1464 * Don't abort the radio when enabling telemetry monitoring
1465 * Clean up some altosui comments
1466 * Switch TeleMetrum from v0.2 to v1.0
1467 * Add Linux device discovery
1468 * Interrupt running replay thread when starting another replay
1469 * serial port read function cannot be interrupted. poll every 1 second
1470 * TD reports "not-connected" when GPS has 0 sats
1471 * Tasks may move in task structure as a result of ao_exit
1472 * Enable telemetry monitoring
1473 * Use 16-bit flite voice (which appears to have changed symbols
1475 * When changing RESET line, delay 20ms
1478 * choose a better set of docbook xsl files
1480 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
1482 altos (0.6+131+g6629ec5) unstable; urgency=low
1484 * lose the url entirely for now
1486 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
1488 altos (0.6+129+g934434f) unstable; urgency=low
1492 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
1494 altos (0.6+127+g05ad583) unstable; urgency=low
1496 * need another build dep
1498 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
1500 altos (0.6+125+g8f1d47e) unstable; urgency=low
1502 * make lintian happy
1503 * tweak copyright assertion
1504 * crudely incorporate "day in the life" info from web page
1505 * rewrite urls in docbook format
1507 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
1509 altos (0.6+119+g00f49c8) unstable; urgency=low
1512 * update changelogs for Debian build
1513 * move gbp.conf into debian/
1514 * initial harness for documentation
1518 * Round radio calibration value instead of truncating
1519 * Document the ao-dumplog '--remote' flag for radio-link downloads
1521 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
1523 altos (0.6+108+g6e61170) unstable; urgency=low
1526 * Need to duplicate new altitude conversion code in aoview.
1528 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
1530 altos (0.6+106+ga1478f6) unstable; urgency=low
1533 * Add ao_radio_xmit to help test boards without flashing them.
1534 * Allow product names to have suffixes (like board revisions)
1535 * Fix and document the ao-rawload --run flag
1537 * Leave .ihx files in the build directory too - easier to debug that way
1538 * Eliminate deadlock when writing config from radio link
1539 * Fix up LED colors for each product.
1540 * Add .gitignore for ao-bringup
1543 * create a turn on script for lighting up TeleDongle v0.2 boards
1545 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
1547 altos (0.6+95+g2f45953) unstable; urgency=low
1549 * update changelogs for Debian build
1550 * conditionalize use of git on executability of /usr/bin/git binary
1552 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
1554 altos (0.6+88+gdeccc10) unstable; urgency=low
1556 * add gawk as a build dependency since strtonum is a gawk extension
1558 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
1560 altos (0.6+86+g2491282) unstable; urgency=low
1563 * Disable monitor mode before attempting radio test.
1564 * Ensure that ao_alarm waits at least the specified time
1565 * Remove dbg driver code from telemetrum/teledongle
1566 * Add AT45DBxx1D driver
1567 * Remove green LED and temp sensor from v0.2 code
1568 * Add at45db161d.h header file for new flash part.
1569 * Add 'f' command to display flash status register contents
1570 * Dump more flash parameters for the flash_status command
1571 * Dump config block from read/write config and flash_status commands
1572 * Don't set ao_flash_setup_done until we're actually done.
1573 * Remove flash debugging printfs
1574 * Add simple gps dump command 'g'
1575 * Force idle mode by shorting the SPI clock to ground at boot time.
1576 * Switch to using internal cc1111 temperature sensor
1577 * Missing ao_mutex_put in gps_dump
1578 * Compute daytime using GPS as time base
1579 * Pull in a bit more data for filtering the start of the boost
1580 * Log GPS data on pad after boost detect.
1581 * Change barometer conversion code to shrink conversion table
1582 * Change altos build process to support per-product compile-time
1584 * Update .gitignore files
1585 * Quiet make output.
1586 * Add back stack size checking to altos linking phase
1587 * Must install .map files for ao-load to work
1589 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
1591 altos (0.6+60+g10d1bbc) unstable; urgency=low
1594 * Use ao_radio_get/ao_radio_put in packet code.
1596 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
1598 altos (0.6+58+gbbb152c) unstable; urgency=low
1601 * Re-order config values. Change frequency to cal
1602 * Allow radio calibration to be set from ao-load
1603 * Add --cal to man page
1605 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
1607 altos (0.6+53+gcd49847) unstable; urgency=low
1610 * Remove send_serial and serial_baud commands.
1611 * Make ao_cmd_decimal produce both 32 and 16 bit values.
1612 * Add radio calibration configuration.
1614 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
1616 altos (0.6+49+g9a1d7dd) unstable; urgency=low
1619 * Change default callsign to "N0CALL"
1621 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
1623 altos (0.6+47+g4053309) unstable; urgency=low
1625 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
1626 * change home URL in control file to be the AltOS page
1628 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
1630 altos (0.6+43+gd6ba07e) unstable; urgency=low
1633 * Decode HDOP data from skytraq GPS
1634 * Document ao-postflight --gps and --kml options.
1635 * Make ao-postflight create filenames using input filenames.
1636 * Make TD print 0000-00-00 for invalid dates.
1637 * Fix --plot arg handling. Add -all option.
1638 * Convert telemetry file GPS satellite information in cc_log_read
1639 * Don't crash if --plot isn't passed on ao-postflight command line
1640 * ao-postflight: compute barometric alt for each GPS position
1641 * ao-postflight: don't try to use missing gps sat data
1642 * Automatically extract flight number for eeprom and telem filenames.
1644 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
1646 altos (0.6+32+g87e6f3e) unstable; urgency=low
1649 * fix typo in comment
1652 * Reduce igniter firing time from 500ms to 50ms.
1653 * Add GPS date/time output to ao-postflight.
1654 * Eliminate SiRF state values from ao-view.
1656 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
1658 altos (0.6+27+gb0d7e3f) unstable; urgency=low
1661 * Add two-point accelerometer calibration.
1662 * Remove "l" command as ao-dumplong no longer uses it
1663 * Remove "d" command
1664 * Remove "f" command
1665 * Reformat ADC values to show all 16 bits
1666 * ao_flight_test was using accel value for pressure too
1667 * Pass accel calibration over telemetry stream. Telemetry data format
1669 * Add ability to dump eeprom data over radio link.
1670 * In packet master, move USB flush from packet thread to echo thread
1671 * In USB pollchar, wait for packet before re-checking USB out len
1672 * Explicitly use USB I/O routines in packet code
1673 * Flush pending input when switching to remote packet mode
1674 * Stop recording in ao-dumplog after receiving an invalid block
1675 * Move ao_match_word from ao_ignite.c to ao_cmd.c
1676 * Add Watchdog Timer Control register definitions
1677 * Add reboot command.
1678 * Return radio to telemetry settings when packet system closed.
1679 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
1680 * Loosen tolerances for main->landed transition
1681 * Provide a dummy 'uninstall' target in the src directory.
1682 * Share telemetry parsing code in cc library.
1683 * Enable telemetry receive in ao_view
1684 * Switch order of serial/flight in ao-postflight summary
1685 * Add flight number to telemetry stream.
1686 * Add date to GPS data, captured from GPRMC packet.
1687 * Stop using SiRF state info.
1689 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
1691 altos (0.6) unstable; urgency=low
1694 * Add support for the SkyTraq GPS unit
1695 * Build two versions of TM, one for SiRF, one for SkyTraq
1696 * Save some DSEG space by marking cmd functions __reentrant
1697 * Add ao_wake_task and ao_exit
1698 * Add keyhole-markup generation for ao-postflight.
1699 * Initial packet bits. Just testing transmission
1700 * Add radio carrier command
1701 * Wait for TX to finish sending data
1703 * Remove reason from ao_dma_abort
1704 * Switch packet code from timer thread to ao_alarm
1705 * Use ao_radio_done to wait for TX to completely finish with packet
1706 * Send SYN packet to set sequence numbers
1708 * Do more flushing in packet test code
1709 * Use ao_alarm for ao_delay so it can be easily interrupted
1710 * Poke master to speed up packet rate when things are busy
1711 * No need to wakeup &ao_tick_count now
1712 * Enable packet-based communcation to command processor
1713 * Add more docs to the README file
1714 * Disable interrupts while removing tasks from task list
1715 * Add ao_usb_pollchar to ao.h
1717 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
1719 altos (0.5+90+g127c312) unstable; urgency=low
1721 * de-version the libreadline-dev build dependency
1723 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
1725 altos (0.5+86+g2de548f) unstable; urgency=low
1727 * automate push of updated and tagged master branch during
1728 debian/rules prebuild
1729 * flush repetitive junk out of debian/changelog, and update the
1731 * add support for tagging git repository on each Debian package build
1733 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
1735 altos (0.5+77+gc57bd7f) unstable; urgency=low
1737 * build for Debian from git
1739 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600