1 altos (0.6+32+g87e6f3e) unstable; urgency=low
7 * Reduce igniter firing time from 500ms to 50ms.
8 * Add GPS date/time output to ao-postflight.
9 * Eliminate SiRF state values from ao-view.
11 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
13 altos (0.6+27+gb0d7e3f) unstable; urgency=low
16 * Add two-point accelerometer calibration.
17 * Remove "l" command as ao-dumplong no longer uses it
20 * Reformat ADC values to show all 16 bits
21 * ao_flight_test was using accel value for pressure too
22 * Pass accel calibration over telemetry stream. Telemetry data format
24 * Add ability to dump eeprom data over radio link.
25 * In packet master, move USB flush from packet thread to echo thread
26 * In USB pollchar, wait for packet before re-checking USB out len
27 * Explicitly use USB I/O routines in packet code
28 * Flush pending input when switching to remote packet mode
29 * Stop recording in ao-dumplog after receiving an invalid block
30 * Move ao_match_word from ao_ignite.c to ao_cmd.c
31 * Add Watchdog Timer Control register definitions
33 * Return radio to telemetry settings when packet system closed.
34 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
35 * Loosen tolerances for main->landed transition
36 * Provide a dummy 'uninstall' target in the src directory.
37 * Share telemetry parsing code in cc library.
38 * Enable telemetry receive in ao_view
39 * Switch order of serial/flight in ao-postflight summary
40 * Add flight number to telemetry stream.
41 * Add date to GPS data, captured from GPRMC packet.
42 * Stop using SiRF state info.
44 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
46 altos (0.6) unstable; urgency=low
49 * Add support for the SkyTraq GPS unit
50 * Build two versions of TM, one for SiRF, one for SkyTraq
51 * Save some DSEG space by marking cmd functions __reentrant
52 * Add ao_wake_task and ao_exit
53 * Add keyhole-markup generation for ao-postflight.
54 * Initial packet bits. Just testing transmission
55 * Add radio carrier command
56 * Wait for TX to finish sending data
58 * Remove reason from ao_dma_abort
59 * Switch packet code from timer thread to ao_alarm
60 * Use ao_radio_done to wait for TX to completely finish with packet
61 * Send SYN packet to set sequence numbers
63 * Do more flushing in packet test code
64 * Use ao_alarm for ao_delay so it can be easily interrupted
65 * Poke master to speed up packet rate when things are busy
66 * No need to wakeup &ao_tick_count now
67 * Enable packet-based communcation to command processor
68 * Add more docs to the README file
69 * Disable interrupts while removing tasks from task list
70 * Add ao_usb_pollchar to ao.h
72 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
74 altos (0.5+90+g127c312) unstable; urgency=low
76 * de-version the libreadline-dev build dependency
78 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
80 altos (0.5+86+g2de548f) unstable; urgency=low
82 * automate push of updated and tagged master branch during
84 * flush repetitive junk out of debian/changelog, and update the
86 * add support for tagging git repository on each Debian package build
88 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
90 altos (0.5+77+gc57bd7f) unstable; urgency=low
92 * build for Debian from git
94 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600