be honest
[web/altusmetrum] / TelePyro / index.mdwn
1 # TelePyro
2
3 This is an 8-channel pyro expansion board for [TeleMetrum](../TeleMetrum/).
4
5 ## Motivation ##
6
7 It would be nice to support more than the 2 channels of igniter control
8 included in the stock [TeleMetrum](../TeleMetrum/) design, so that we can
9 fly more complex projects involving staging, air starts, and backup ejection
10 charges.  We also want to experiment with better circuits for testing igniter
11 continuity, with the hope of being able to measure actual resistance and not
12 just continuity.
13
14 ## Features ##
15
16 ### User View ###
17
18 * Small circuit board mounted near [TeleMetrum](../TeleMetrum/)
19 * Requires [TeleMetrum](../TeleMetrum/) v0.2 or later, as v0.1 does not 
20   have the required companion board interface
21 * Connections for 8 distinct igniter firing channels provided
22 * Supports use of separate battery for ejection charges
23
24 ### Developer View ###
25
26 * [Atmel ATtiny48](http://www.atmel.com/dyn/products/product_card_v2.asp?PN=ATtiny48) Microcontroller
27         * 4k Flash
28         * 256 bytes SRAM
29         * 64 bytes EEPROM
30         * 8-channel 10-bit ADC
31         * SPI target interface
32         * In-system programming interface
33 * Software Features (planned)
34         * programmed in C using gcc-avr
35         * Runs from on-chip flash, uses on-chip RAM
36 * Tools Used
37         * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
38 * Licenses
39         * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
40         * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
41
42 ## Artifacts ##
43
44 A schematic exists on [git.gag.com](http://git.gag.com) in the project 
45 [hw/telepyro](http://git.gag.com/?p=hw/telepyro;a=summary), 
46 but no prototypes have been built yet.