1 commit cb4a73f3b65ba72f645fd37ab8712829c9537bf8
3 Author: Bdale Garbee <bdale@gag.com>
4 Date: Wed Sep 2 23:17:37 2009 -0600
6 Merge commit 'origin/master'
8 commit e2e449d5c23356e913f312de1fb2611a9dd5a352
9 Author: Keith Packard <keithp@keithp.com>
10 Date: Wed Sep 2 22:01:52 2009 -0700
12 Remove bit-banging debug support from TM board builds
14 Our current TM boards don't have the wires to do bit-banging to
15 another cc1111 board, so it doesn't make sense to fill up their flash
16 with useless code (and the 'help' text with useless commands). Leave
17 this to the TI board until we have boards that can serve as debug dongles.
19 Signed-off-by: Keith Packard <keithp@keithp.com>
21 commit acea083d80e1ecc4287083519ea666964016b257
22 Author: Keith Packard <keithp@keithp.com>
23 Date: Wed Sep 2 22:00:37 2009 -0700
25 Make the ao_log_record structures 8 bytes again.
27 When the GPS signal strength data was added, the structure was
28 accidentally extended to 9 bytes, making all log records 9 bytes
29 long. While not a serious problem, this left log records spanning
30 across eeprom block boundaries, which seems like a bad plan.
32 Signed-off-by: Keith Packard <keithp@keithp.com>
34 commit 7d39f17684feb49ac8a0017902158f298696e37c
35 Author: Keith Packard <keithp@keithp.com>
36 Date: Wed Sep 2 21:57:54 2009 -0700
38 Make eeprom reads and writes across block boundary work
40 Reading and writing across the block boundary was not stepping the
41 eeprom position after the partial i/o operation at the end of the
42 first block. This meant that the operation would re-use the end of the
43 previous block, either re-reading or re-writing it.
45 Signed-off-by: Keith Packard <keithp@keithp.com>
47 commit 9ddd8696b4004ccc03238d95a8c2a1d07075e0fb
48 Author: Bdale Garbee <bdale@gag.com>
49 Date: Mon Aug 31 16:48:03 2009 -0600
51 update changelogs for Debian build
53 commit 6926c4ab5d87a8f2eb4fcde2c673fb3a4639e115
54 Author: Bdale Garbee <bdale@gag.com>
55 Date: Mon Aug 31 16:47:44 2009 -0600
57 pixmap file should not be executable
59 commit 1495e2f27acde3743c3764a0c31ee082224d6c64
60 Author: Bdale Garbee <bdale@gag.com>
61 Date: Mon Aug 31 16:42:55 2009 -0600
63 update changelogs for Debian build
65 commit c8c5b7963babe8eb16e2651fba9cd2c8d1cba74e
66 Author: Bdale Garbee <bdale@gag.com>
67 Date: Mon Aug 31 16:42:37 2009 -0600
69 deliver an icon for the Debian menu system
71 commit 591b99c232e780246fc07841c09c8c4e7835facb
72 Author: Bdale Garbee <bdale@gag.com>
73 Date: Mon Aug 31 16:26:00 2009 -0600
75 update changelogs for Debian build
77 commit b34474c1f3083e73b7184d519f54d4c8031836fd
78 Merge: 8df1697 0d65bff
79 Author: Bdale Garbee <bdale@gag.com>
80 Date: Mon Aug 31 16:25:32 2009 -0600
82 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
84 commit 6358041f846ba9a20fa650c367d907dc4336e54c
85 Author: Keith Packard <keithp@keithp.com>
86 Date: Sat Aug 22 13:38:56 2009 -0700
88 Enable GPS degraded mode, set 10 sec degraded timeout.
90 No reason not to let the GPS report solutions whenever it likes, let's
93 Signed-off-by: Keith Packard <keithp@keithp.com>
95 commit 0d65bff443c17d4d98c18b620ec075ab66b30efd
96 Author: Keith Packard <keithp@keithp.com>
97 Date: Fri Aug 21 10:47:46 2009 -0700
99 Turn off GPS tracking data when not present in data stream
101 Signed-off-by: Keith Packard <keithp@keithp.com>
103 commit 8df169791835510d96c11a3b0aa3cc5b79fa7fde
104 Author: Bdale Garbee <bdale@gag.com>
105 Date: Wed Aug 19 02:21:23 2009 -0600
107 update changelogs for Debian build
109 commit 42ab6d52540d0326ef89e9d57954b08248558468
110 Author: Bdale Garbee <bdale@gag.com>
111 Date: Wed Aug 19 02:21:06 2009 -0600
113 fix location for delivery of sources.list fragment
115 commit 977f5dc0bc7c666dcc1f21db77416efca0d696aa
116 Author: Bdale Garbee <bdale@gag.com>
117 Date: Wed Aug 19 02:11:11 2009 -0600
119 update changelogs for Debian build
121 commit 8d4d6655f1b4c2fbc522fd255bfb75406e5ddaef
122 Author: Bdale Garbee <bdale@gag.com>
123 Date: Wed Aug 19 02:11:00 2009 -0600
125 oops, aoview is now ao-view!
127 commit b9a97aea65f871fd287bc0bb566d8664766f4afd
128 Author: Bdale Garbee <bdale@gag.com>
129 Date: Wed Aug 19 02:07:16 2009 -0600
131 update changelogs for Debian build
133 commit 21e3dd0affac89919e5d0e29c6e9eb1eacb51801
134 Author: Bdale Garbee <bdale@gag.com>
135 Date: Wed Aug 19 02:06:49 2009 -0600
137 enable support for Debian menus
139 commit 0087c1776e0253fc2bd3b86f15bf9d1b32bdc45a
140 Author: Bdale Garbee <bdale@gag.com>
141 Date: Wed Aug 19 00:52:57 2009 -0600
143 update changelogs for Debian build
145 commit 4486d9156e19e4280b42bcd422d81d04f2d04a92
146 Merge: dd09f0b 33edd62
147 Author: Bdale Garbee <bdale@gag.com>
148 Date: Wed Aug 19 00:49:24 2009 -0600
150 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
152 commit 33edd62992a32b0ec8ca66d879fa300871db5937
153 Author: Keith Packard <keithp@keithp.com>
154 Date: Tue Aug 18 23:38:16 2009 -0700
156 Update ao-view to add GPS satellite tracking data
158 This adds another column to the display to hold per-satellite GPS
159 tracking data and a count of the visible and locked sats.
161 Signed-off-by: Keith Packard <keithp@keithp.com>
163 commit 29687cbd462a332d9a36ed87500c5b737dcae3f4
164 Author: Keith Packard <keithp@keithp.com>
165 Date: Tue Aug 18 22:35:15 2009 -0700
167 Handle GPS satellite tracking data
169 SiRF message #4 includes signal strength and GPS engine state for each
170 of the satellites being tracked. This data is now parsed and sent to
171 eeprom and the radio.
173 Signed-off-by: Keith Packard <keithp@keithp.com>
175 commit dd09f0bc2b950c00f3b489878cd69ad8a003f46c
176 Author: Bdale Garbee <bdale@gag.com>
177 Date: Tue Aug 18 21:57:01 2009 -0600
179 update changelogs for Debian build
181 commit cd5ce661e2a8f9694933358ccb5b916fbed089c2
182 Author: Bdale Garbee <bdale@gag.com>
183 Date: Tue Aug 18 21:49:39 2009 -0600
185 add support for building Debian package
187 commit d996aa9b32fb0eb385bd3d158256c29788a42fe3
188 Merge: b3b2d3c 7d4ceb7
189 Author: Bdale Garbee <bdale@gag.com>
190 Date: Tue Aug 18 18:56:09 2009 -0600
192 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
194 commit 7d4ceb75a454e6c9b3fe0bd934fadcb5104dea36
195 Author: Keith Packard <keithp@keithp.com>
196 Date: Tue Aug 18 17:55:22 2009 -0700
198 Add ao-ejection.1 man page
200 Document the input requirements and output format
202 Signed-off-by: Keith Packard <keithp@keithp.com>
204 commit b3b2d3c475a135084b5628c730fc6fca1ba0817b
205 Merge: 4685fc5 da12b89
206 Author: Bdale Garbee <bdale@gag.com>
207 Date: Tue Aug 18 18:36:03 2009 -0600
209 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
211 commit da12b89fb056a68e65ba363fef91d266727cb685
212 Author: Keith Packard <keithp@keithp.com>
213 Date: Tue Aug 18 17:30:43 2009 -0700
215 Create ChangeLog from git log
217 commit 7d69e2b3715faed10ce21ad562fc4d25dfc5f9c1
218 Author: Keith Packard <keithp@keithp.com>
219 Date: Tue Aug 18 17:29:29 2009 -0700
221 Fix ao-bitbang examples to not have . in the first column
223 commit 4685fc541466afbeefc151bcb64cd054739c048b
224 Merge: 1c2a0b6 c29275b
225 Author: Bdale Garbee <bdale@gag.com>
226 Date: Tue Aug 18 18:09:38 2009 -0600
228 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
231 ao-tools/ao-bitbang/Makefile.am
232 ao-tools/ao-eeprom/Makefile.am
233 ao-tools/ao-load/Makefile.am
234 ao-tools/ao-load/ao-load.c
235 ao-tools/ao-rawload/Makefile.am
237 commit c29275b72438637d46d7a50742882d2736eb176a
238 Author: Keith Packard <keithp@keithp.com>
239 Date: Tue Aug 18 15:21:57 2009 -0700
241 Add manual pages for remaining commands.
243 Manuals written for ao-bitbang, ao-eeprom, ao-load, ao-rawload and
246 Manual for ao-dbg updated to reflect program name change.
248 Signed-off-by: Keith Packard <keithp@keithp.com>
250 commit 9b03d620722dc54630539afba40720c30de69b2d
251 Author: Keith Packard <keithp@keithp.com>
252 Date: Tue Aug 18 12:19:31 2009 -0700
254 Use --tty/-T on command line to specify target device
256 Also, use the ALTOS_TTY environment variable in all tools. Note that
257 the magic value of "BITBANG" switches the library to connecting
258 through a CP2103 instead.
260 Signed-off-by: Keith Packard <keithp@keithp.com>
262 commit 7c790fe859dff062692964338091ffbbcdf63257
263 Author: Keith Packard <keithp@keithp.com>
264 Date: Tue Aug 18 12:40:24 2009 -0700
266 Rename tools to ao-<foo>
268 Use a consistent prefix to make it easier to remember which programs
269 belong to this package
271 Signed-off-by: Keith Packard <keithp@keithp.com>
273 commit 1c2a0b6653623b689d68d7349a6b2dce3e20a4a6
274 Author: Keith Packard <keithp@keithp.com>
275 Date: Tue Aug 18 13:36:54 2009 -0700
277 re-add debugger sources
279 commit 9a9cce5510b87252f863239ac807b9fb4395b288
280 Author: Keith Packard <keithp@keithp.com>
281 Date: Tue Aug 18 12:19:31 2009 -0700
283 Start working on using getopt for the tty name
285 commit 9789ca5e8caa9a013e804f307b9da380e147bd75
286 Author: Keith Packard <keithp@keithp.com>
287 Date: Tue Aug 18 12:40:24 2009 -0700
289 Rename tools to ao-<foo>
291 Use a consistent prefix to make it easier to remember which programs
292 belong to this package
294 Signed-off-by: Keith Packard <keithp@keithp.com>
296 commit a5782398d968e7cb11f7203afada7c216f233b3b
297 Author: Keith Packard <keithp@keithp.com>
298 Date: Tue Aug 18 11:34:28 2009 -0700
300 Remove unused cctools code paths for old libusb and cp2103 ioctls.
302 Communication with the CP2103 board has gone through three revisions,
303 first using ioctls supported by the CP2103 kernel driver, then using
304 the old synchronous usb library and now using the newer libusb
305 asynchronous interface. There's no reason to keep shipping the old
306 stale code now that the new stuff works reliably.
308 Signed-off-by: Keith Packard <keithp@keithp.com>
310 commit 7cba411de0780c65e3490ab67186a514f0ea42ec
311 Author: Keith Packard <keithp@keithp.com>
312 Date: Mon Aug 17 20:47:31 2009 -0700
314 test for sdcc, nickle and readline
316 Signed-off-by: Keith Packard <keithp@keithp.com>
318 commit f48dcffae761700355a17b59345d55a60703f0c4
319 Author: Keith Packard <keithp@keithp.com>
320 Date: Sun Aug 9 20:43:10 2009 -0700
322 Sync USB data after each memory write command
324 This makes sure we flush the USB link often enough for the other end to keep
327 Signed-off-by: Keith Packard <keithp@keithp.com>
329 commit cd5456f18e4b39ad76d5549df91a0e0cfb18a2e9
330 Author: Keith Packard <keithp@keithp.com>
331 Date: Sun Aug 9 16:08:07 2009 -0700
333 Handle partial ALSA PCM writes
335 The ALSA spec says that snd_pcm_writei will not return a partial write, but
336 at least on the OLPC, that's not true. Deal with this.
338 Signed-off-by: Keith Packard <keithp@keithp.com>
340 commit 3056cb8eef5aee0dcd342488386355d8b8f574c8
341 Author: Keith Packard <keithp@keithp.com>
342 Date: Sun Aug 9 15:55:19 2009 -0700
344 Check more alsa return statuses
346 commit 8ddf3345afd8cbf638e81993633f7861d8dbca63
347 Author: Keith Packard <keithp@keithp.com>
348 Date: Sat Jul 18 01:47:34 2009 -0700
350 Don't report distance to rocket without valid GPS
352 When there's no valid GPS data, don't try to report the distance and bearing
353 to the rocket after landing.
355 Signed-off-by: Keith Packard <keithp@keithp.com>
357 commit fbcb7b20fa701a6e534d38e307839466545668e3
358 Author: Keith Packard <keithp@keithp.com>
359 Date: Sat Jul 18 01:05:33 2009 -0700
361 Add B command to set serial baud rate
363 Signed-off-by: Keith Packard <keithp@keithp.com>
365 commit 91b023e7e4eeed838e0320d2ddac0f6aac39e565
366 Author: Keith Packard <keithp@keithp.com>
367 Date: Sat Jul 18 01:05:13 2009 -0700
369 Get rid of spaces after minus sign in climb value
371 commit 28be20cf914fb34dc3c776519708d0f02091764e
372 Author: Keith Packard <keithp@keithp.com>
373 Date: Sat Jul 18 01:04:39 2009 -0700
375 Switch to 57600 baud for GPS data
377 commit d3f76ce58b9c0ed2e5a9fe3bbc7fb9cb38247714
378 Author: Keith Packard <keithp@keithp.com>
379 Date: Sat Jul 18 01:04:17 2009 -0700
381 Drain serial port before changing speed
383 Signed-off-by: Keith Packard <keithp@keithp.com>
385 commit d7c2d358ed8a1afc9f0ba2bd830b10f6b56dc7b1
386 Author: Keith Packard <keithp@keithp.com>
387 Date: Sat Jul 18 00:44:42 2009 -0700
389 Display last known GPS coord while unlocked
391 Signed-off-by: Keith Packard <keithp@keithp.com>
393 commit 5195fcfe239e430e1f9f11774c9a245c7b29dae9
394 Author: Keith Packard <keithp@keithp.com>
395 Date: Sat Jul 18 00:44:01 2009 -0700
397 use g_source_destroy instead of free on serial object
399 commit 1e5e98bd8f5ea0bc15592de454e3629383462371
400 Author: Keith Packard <keithp@keithp.com>
401 Date: Sat Jul 18 00:43:22 2009 -0700
403 Trim aoview_serial_set_callback args down to just port and callback
405 commit 08f37056deec25d77062bc411a04033401b033a5
406 Author: Keith Packard <keithp@keithp.com>
407 Date: Fri Jul 17 22:11:03 2009 -0700
409 Reset GPS at boot time
411 commit 1150aa850f5a025b849556e32c4dddb27937d9af
412 Author: Keith Packard <keithp@keithp.com>
413 Date: Fri Jul 17 22:10:43 2009 -0700
415 Fix up serial debug output
417 commit 2a7956a64935246475f92d44c08369e0230b676a
418 Author: Keith Packard <keithp@keithp.com>
419 Date: Fri Jul 17 21:34:13 2009 -0700
421 Allow the GPS port to run at 4800 baud if desired
423 commit 8d650769c319261c97f5e68eff9138207b95c0f8
424 Author: Keith Packard <keithp@keithp.com>
425 Date: Fri Jul 17 21:33:53 2009 -0700
427 Initialize the GPS serial protocol state
429 Signed-off-by: Keith Packard <keithp@keithp.com>
431 commit ab40d224b39ba6d29c4056e2d2c365e1eb3d3793
432 Author: Keith Packard <keithp@keithp.com>
433 Date: Fri Jul 17 21:33:18 2009 -0700
435 Use uint8_t for comparisons to avoid int conversions
437 Signed-off-by: Keith Packard <keithp@keithp.com>
439 commit d6749bf24792bb41ca700cf4b8e5e1ac1a63cbf0
440 Author: Keith Packard <keithp@keithp.com>
441 Date: Fri Jul 17 21:30:53 2009 -0700
443 Add AO_GPS_RUNNING state.
445 This tracks whether the GPS receiver has ever sent a valid report to the
446 flight computer, allowing the user to tell whether the GPS receiver is
449 Signed-off-by: Keith Packard <keithp@keithp.com>
451 commit a1da7e871aee75308bc05ce1b7a0dc402e4c9509
452 Author: Keith Packard <keithp@keithp.com>
453 Date: Fri Jul 17 21:25:35 2009 -0700
455 Add M command to monitor serial bytes
457 commit ddfa2308c0be4c002f982ae9da6032ee7854117d
458 Author: Keith Packard <keithp@keithp.com>
459 Date: Fri Jul 17 21:24:45 2009 -0700
461 Support the not-connected GPS state
463 commit 34f148500df427c148188c0ada20bf914a7c74ba
464 Author: Keith Packard <keithp@keithp.com>
465 Date: Fri Jul 17 19:23:10 2009 -0700
467 Use 57600 baud for GPS. Clean up gps init.
469 Assume GPS is either in 4800 NMEA or 57600 SiRF mode, send just the sequence
470 to get from 4800 NMEA to 5760 SiRF.
472 Also, eliminate threads from the gps test program.
474 Signed-off-by: Keith Packard <keithp@keithp.com>
476 commit 2deca0c52cd6cfb4baceb59c8a5458344bada338
477 Author: Keith Packard <keithp@keithp.com>
478 Date: Fri Jul 17 17:09:20 2009 -0700
480 Try harder to get the GPS receiver serial link sync'd up.
482 We cannot assume that the GPS receiver is in any particular state when it
483 boots, so we try to send the serial configuration at several rates and hope
484 that it eventually sees something that it likes.
486 Signed-off-by: Keith Packard <keithp@keithp.com>
488 commit 31d5670a9144b943ce9c8cb00deb5fb659af0b1c
489 Author: Keith Packard <keithp@keithp.com>
490 Date: Fri Jul 17 17:06:18 2009 -0700
492 Rolling average for pad location. Say 'GPS ready'.
494 Use a rolling average for the pad location, instead of just averaging all
495 positions. This filters out old (presumably less accurate) values eventually.
497 When enough GPS samples have been acquired, say 'GPS ready'.
499 Signed-off-by: Keith Packard <keithp@keithp.com>
501 commit bfe1e76c82738baaf65abbc58c3244a07ea8fefe
502 Author: Keith Packard <keithp@keithp.com>
503 Date: Fri Jul 17 16:22:51 2009 -0700
505 Split GPS data into a separate column
507 Signed-off-by: Keith Packard <keithp@keithp.com>
509 commit 5f0179652e8bb85add9067e5253e981c60f2c51e
510 Author: Keith Packard <keithp@keithp.com>
511 Date: Fri Jul 17 16:03:35 2009 -0700
513 Fix up SiRF parsing and test code so that it actually works
515 Signed-off-by: Keith Packard <keithp@keithp.com>
517 commit 0b35447d05a0c7eaf4fefcbcf0065fe3320bba82
518 Author: Keith Packard <keithp@keithp.com>
519 Date: Fri Jul 17 13:58:14 2009 -0700
521 Add host-side gps protocol testing program
523 commit fef7334bddb9fccfbd6deab7d5d466ab3e76323a
524 Author: Keith Packard <keithp@keithp.com>
525 Date: Sat Jul 11 00:56:13 2009 -0700
527 Hook aoview directly to alsa
529 This skips the flite internal audio stuff which opened and closed the audio
530 device for each phrase. This caused the first part of some phrases to be
531 missed when using an external audio device.
533 Signed-off-by: Keith Packard <keithp@keithp.com>
535 commit 80cadf44f5f1accd6ddfca25c2af8d4d424f26d9
536 Author: Keith Packard <keithp@keithp.com>
537 Date: Thu Jul 9 20:55:10 2009 -0700
539 Show speed. Format numbers. Timeout and report final status.
541 The speed value is now shown in the top label bar. Ascent shows
542 accelerometer-derived data, otherwise it's baro derived.
544 All of the numbers displayed are now given sensible printf formats so they
545 don't contain way too many digits.
547 Instead of doing periodic reporting based on flight tick count, data is
548 reported every 10 seconds based on wall time. After landing, or when no data
549 have been received for a while, final flight information is spoken.
551 Signed-off-by: Keith Packard <keithp@keithp.com>
553 commit 19630ef084866f4230e68ccf11284b30c68128b1
554 Author: Keith Packard <keithp@keithp.com>
555 Date: Sun Jul 5 08:35:28 2009 -0700
557 Dont smash aoview_monitor_parse input buffer
559 commit e506ed4b6efb86eab50204658fcd433b987e3831
560 Author: Keith Packard <keithp@keithp.com>
561 Date: Tue Jun 30 15:25:52 2009 -0700
563 Integrate flite into aoview directly. Fix great circle computation.
565 Use a separate thread for flite rather than a separate program.
566 Save voice state to gconf.
567 Add filters for replay file selection
569 Signed-off-by: Keith Packard <keithp@keithp.com>
571 commit 5b988e0146075d57434f8484e1ec9fcf3e183df2
572 Author: Keith Packard <keithp@keithp.com>
573 Date: Tue Jun 30 15:24:53 2009 -0700
577 commit 696233b088645bba1aaa6aa6c5358c3ecfa5cd3f
578 Author: Keith Packard <keithp@keithp.com>
579 Date: Tue Jun 30 15:24:31 2009 -0700
583 commit 2e06772c8b6fd74f86e640ed97f0d5bc8c095c2f
584 Author: Keith Packard <keithp@keithp.com>
585 Date: Tue Jun 30 11:58:30 2009 -0700
587 Add telem replay and larger labels
589 Replays telemetry files in real time
590 Shows height/state/rssi in big values at the top.
592 Signed-off-by: Keith Packard <keithp@keithp.com>
594 commit 566dde161385263700eaae51095eecfa9b5972ee
595 Author: Keith Packard <keithp@keithp.com>
596 Date: Mon Jun 29 23:06:47 2009 -0700
598 Update aoview/.gitignore
600 Signed-off-by: Keith Packard <keithp@keithp.com>
602 commit 4ca2d910f3be689fd3c78a4f1be0555d6b1a30c1
603 Author: Keith Packard <keithp@keithp.com>
604 Date: Mon Jun 29 23:05:27 2009 -0700
606 Use flite to announce flight state
608 This uses the flite voice synthesis library from festival to announce
609 altitude and speed information during the rocket flight.
611 Signed-off-by: Keith Packard <keithp@keithp.com>
613 commit 527d7c803ed9597b210634018cb2eb9d048d9846
614 Author: Keith Packard <keithp@keithp.com>
615 Date: Mon Jun 29 23:03:58 2009 -0700
617 Add GPS speed and error data to telemetry and aoview
619 Having switched to the SiRF binary GPS format, the velocity and error data
620 can now be displayed.
622 Signed-off-by: Keith Packard <keithp@keithp.com>
624 commit ee4919dd771b00e2a2dd1083c9528efa7baab50f
625 Author: Keith Packard <keithp@keithp.com>
626 Date: Mon Jun 29 13:54:00 2009 -0700
628 Convert GPS to SiRF binary protocol.
630 This switches the GPS unit from NMEA to SiRF protocol at startup and then
631 parses the binary data. The binary data uses a different encoding of lat/lon
632 than the NMEA strings, and so the telemetry and eeprom data formats change
635 Signed-off-by: Keith Packard <keithp@keithp.com>
637 commit 49bf37767d2453869f2ca2c0832d1124322c66e0
638 Author: Keith Packard <keithp@keithp.com>
639 Date: Wed Jun 17 23:22:25 2009 -0700
641 Add ejection computation utility
643 Signed-off-by: Keith Packard <keithp@keithp.com>
645 commit e59520e343c2573b1b92c0b3c4aaa93e51bc55d3
646 Author: Keith Packard <keithp@keithp.com>
647 Date: Wed Jun 17 13:55:23 2009 -0700
649 Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4
651 None of our boards have a 32kHz xtal oscillator, instead we use those pins
652 (on Telemetrum) for the deployment firing circuits. The old clock
653 initialization code was switching from the 32kHz RC oscillator to the 32kHz
654 crystal and overriding our use of those pins.
656 Signed-off-by: Keith Packard <keithp@keithp.com>
658 commit 1c3cc12c08ddefbd6456a55c54ef87dd94d4ae9a
659 Author: Keith Packard <keithp@keithp.com>
660 Date: Sun Jun 14 17:25:34 2009 -0700
662 Some kernels reference USB ttys as tty/tty* instead of tty:tty*
664 Signed-off-by: Keith Packard <keithp@keithp.com>
666 commit 0f2cbd41332b1b63865c5f1a4e749419b469853a
667 Author: Keith Packard <keithp@keithp.com>
668 Date: Sun Jun 14 16:45:19 2009 -0700
670 Rename state apogee -> coast
672 commit 5834a12c1d3d71105c9e3d1ceaf9f3ffac9ff1eb
673 Author: Keith Packard <keithp@keithp.com>
674 Date: Sun Jun 14 16:39:28 2009 -0700
676 rename states. launchpad -> pad, coast -> fast
678 commit 8c40f19acd09fe93d492c9355da8a1198c34b1c3
679 Author: Keith Packard <keithp@keithp.com>
680 Date: Sun Jun 14 16:36:29 2009 -0700
682 Disable monitor mode when communicating via usb
684 commit 7adea9c59c73acd52743446c74fb675e0a1d6d05
685 Author: Keith Packard <keithp@keithp.com>
686 Date: Thu Jun 4 14:38:45 2009 -0700
688 Format GPS seconds as %02d.%04d to avoid spaces in the value
690 The aoview GPS parsing code doesn't deal well with spaces in the middle of
691 the value, so pad the seconds field with a zero as needed.
693 Signed-off-by: Keith Packard <keithp@keithp.com>
695 commit a0e6bfee635b64092262936c858542318f6fc6dc
696 Author: Bdale Garbee <bdale@gag.com>
697 Date: Thu Jun 4 13:11:48 2009 -0600
699 newer INSTALL file pulled in by autogen.sh
701 commit cf1e258d52b878df10b51a047709b10ecd51a68e
702 Author: Bdale Garbee <bdale@gag.com>
703 Date: Thu Jun 4 13:09:29 2009 -0600
705 add a distclean target to src/Makefile
707 commit 176052b7c14fcad067835ecb550778faf67cf4da
708 Author: Bdale Garbee <bdale@gag.com>
709 Date: Thu Jun 4 13:07:10 2009 -0600
711 add lib to the front of the subdir list
713 commit 208bc15714c7b4020c017eef19011c4eb9ab51e2
714 Author: Keith Packard <keithp@keithp.com>
715 Date: Thu Jun 4 11:20:10 2009 -0700
717 Move build and debug tools to 'cctools' directory.
719 These tools were merged in from the ccdbg package.
721 Signed-off-by: Keith Packard <keithp@keithp.com>
723 commit 17d2432a8b9c15963cd3b821f025ad33972ef477
724 Merge: 210dbaa 8a9a3f0
725 Author: Keith Packard <keithp@keithp.com>
726 Date: Thu Jun 4 11:13:15 2009 -0700
728 Merge ccdbg and altos sources into one giant repository
730 Keeping these separate isn't making things any easier.
732 Signed-off-by: Keith Packard <keithp@keithp.com>
734 commit 210dbaa23cdacf3a6f2d6e23493e96ee2ac9bca7
735 Author: Keith Packard <keithp@keithp.com>
736 Date: Thu Jun 4 10:41:34 2009 -0700
738 Use autotools, move altos to src subdir
740 Signed-off-by: Keith Packard <keithp@keithp.com>
742 commit 8cce307bb3156584ba17ae5a787f645dfee5fb94
743 Author: Keith Packard <keithp@keithp.com>
744 Date: Thu Jun 4 10:25:30 2009 -0700
746 Make menu seperator insensitive
748 commit 778cae8fc5a4b30e5045e4703316fc61ae18562a
749 Author: Keith Packard <keithp@keithp.com>
750 Date: Wed Jun 3 17:07:34 2009 -0700
752 aoview: Add eeprom data fetching
754 Fetches the last flight data from a TM device connected via USB and writes
755 it to the flight log directory.
757 Signed-off-by: Keith Packard <keithp@keithp.com>
759 commit bf140966e9649e75b884c8aa5f25ffbf9eed10ea
760 Author: Keith Packard <keithp@keithp.com>
761 Date: Wed Jun 3 10:57:46 2009 -0700
763 Stop log dumping at flight end. Print 'end' at end of log.
765 No reason to continue dumping data past the end of the flight now that the
766 logging stuff has been demonstrated to work reliably. Also, to make
767 automated log dumping easier, this prints out 'end' after the log data so
768 that aoview knows when to stop reading.
770 Signed-off-by: Keith Packard <keithp@keithp.com>
772 commit 35ac66969abe24ca23776618306a59fc17770e06
773 Author: Keith Packard <keithp@keithp.com>
774 Date: Sun May 31 09:22:01 2009 -0700
776 Start adding bi-directional packet link
778 commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9
779 Author: Keith Packard <keithp@keithp.com>
780 Date: Thu May 28 23:17:33 2009 -0700
782 Eliminate RDF tone generation.
784 Now that we have a viable telemetry-signal based RDF device via TeleDongle,
785 there's no reason to continue to waste power and bandwidth with a NFM tone.
787 Signed-off-by: Keith Packard <keithp@keithp.com>
789 commit 4d83eef0fe1d24a845ab29a535dfc56e13e7ee20
790 Author: Keith Packard <keithp@keithp.com>
791 Date: Thu May 28 23:17:25 2009 -0700
793 Change .gitignore to match new aoload procedure
795 commit dcfcf3bec6788460b6fe8c239c80bad4526bd15b
796 Author: Keith Packard <keithp@keithp.com>
797 Date: Wed May 27 22:01:37 2009 -0700
799 Leave serial number writing to aoload
801 Instead of building per-serial hex files, leave that
802 process to the new aoload program
804 Signed-off-by: Keith Packard <keithp@keithp.com>
806 commit 8a9a3f02b951382573ff74dd6ce5a1c0f335fa86
807 Author: Keith Packard <keithp@keithp.com>
808 Date: Wed May 27 21:53:15 2009 -0700
810 Add aoload to load serial-numbered altos binaries.
812 aoload is a custom version of ccload which edits the data before sending it
813 to the target machine, writing the target serial number into the data.
815 Signed-off-by: Keith Packard <keithp@keithp.com>
817 commit 5a7a63c34b778e40a61ddabd16ec1af9a2be50c3
818 Author: Keith Packard <keithp@keithp.com>
819 Date: Sat May 23 21:20:12 2009 -0700
821 Fix aoview telemetry GPS parsing code to use correct columns
823 This code was trying to pull the GPS data from the wrong columns, causing
824 aoview to fail to display GPS information.
826 Signed-off-by: Keith Packard <keithp@keithp.com>
828 commit 26988c3e7acb2fa832810475e43e08fd2867459c
829 Author: Keith Packard <keithp@keithp.com>
830 Date: Sat May 23 21:18:57 2009 -0700
832 Parse both telemetry or log data ao_flight_test
834 Change the way data is fed from files to the flight test rig to handle
835 either kind of input file.
837 Signed-off-by: Keith Packard <keithp@keithp.com>
839 commit d6f5a0689023546464a71561f53fa2c943077c88
840 Author: Keith Packard <keithp@keithp.com>
841 Date: Sat May 23 21:16:22 2009 -0700
843 Avoid 16-bit overflow in velocity computation.
845 Adding two 16 bit integers together can wrap around to negative numbers,
846 this resulted in velocity values which never decreased, making the switch
847 from coast to apogee state not occur.
849 Signed-off-by: Keith Packard <keithp@keithp.com>
851 commit aa6d87aeb616dd62f0debaded297232022b4f8bd
852 Author: Keith Packard <keithp@keithp.com>
853 Date: Wed May 20 09:44:55 2009 -0700
855 Make file handling more general so it can be reused.
857 The log file handling stuff will be useful for saving eeprom data, so pull
858 it out of the real-time log handling code and make a general interface.
860 Signed-off-by: Keith Packard <keithp@keithp.com>
862 commit b730c8bcbce649cdddba935e1112aaae538bc526
863 Author: Keith Packard <keithp@keithp.com>
864 Date: Sun May 17 23:54:44 2009 -0700
866 Ignore aoview_glade.h
868 commit 91b07410122d0eaaf292cdb31c200925d45eaf2c
869 Author: Keith Packard <keithp@keithp.com>
870 Date: Sun May 17 23:36:21 2009 -0700
872 Transmit computed ground pressure and acceleration values
874 These are the last two values relevant to figuring out the state of the
875 flight computer, and as they are computed by averaging 10 seconds of 100Hz
876 sample data, they're a lot more accurate than anything the receiver could do
879 Signed-off-by: Keith Packard <keithp@keithp.com>
881 commit 71d1689759829f1bc8550f1a4d8c9f2dc90b2ab4
882 Author: Keith Packard <keithp@keithp.com>
883 Date: Sun May 17 23:18:09 2009 -0700
885 Provide install target
887 commit f301b95e87c8ec1e3b58d595a05d486bede5e0c2
888 Author: Keith Packard <keithp@keithp.com>
889 Date: Sun May 17 23:13:20 2009 -0700
891 Embed glade file in executable
893 This eliminates install issues nicely.
895 Signed-off-by: Keith Packard <keithp@keithp.com>
897 commit 26361686d6fc63dc22d22285f0543c5c2c756fb4
898 Author: Keith Packard <keithp@keithp.com>
899 Date: Sun May 17 23:05:23 2009 -0700
901 Add About dialog to aoview.
903 Signed-off-by: Keith Packard <keithp@keithp.com>
905 commit 0f3233c49f43cd4e372e613303919ce4d50255b2
906 Author: Keith Packard <keithp@keithp.com>
907 Date: Sun May 17 22:44:19 2009 -0700
909 USB device names can contain '.' too
911 Depending on the hierarchy of devices, names can contain '.', so allow those
914 Signed-off-by: Keith Packard <keithp@keithp.com>
916 commit 33221277690e6ee30387c506c3f2b8237ed48efd
917 Author: Keith Packard <keithp@keithp.com>
918 Date: Sun May 17 22:43:34 2009 -0700
920 scandir returns -1 on error
922 In which case, the namelist is invalid, so don't look at it, and don't free
925 Signed-off-by: Keith Packard <keithp@keithp.com>
927 commit 7cb9fb675f56bf30ab6bf0bcdc5cb679709ffe3e
928 Author: Keith Packard <keithp@keithp.com>
929 Date: Sun May 17 22:29:54 2009 -0700
931 Send computed accel/vel/pres values over the radio
933 These computed values reflect what the flight computer is actually refering
934 to for state changes, and will be useful in debugging the flight software as
935 well as provide a filtered view of the data.
937 Signed-off-by: Keith Packard <keithp@keithp.com>
939 commit 2c780d67b8a22d75a2da4b2af21fd35f0c6f5236
940 Author: Keith Packard <keithp@keithp.com>
941 Date: Sun May 17 22:29:06 2009 -0700
943 Handle disappearing serial devices
945 Put up a dialog when the serial open fails, and shut down monitoring when
946 the serial device disappears while running.
948 Signed-off-by: Keith Packard <keithp@keithp.com>
950 commit 69616104813fc5ba89fb3128d04fb9328961c59c
951 Author: Keith Packard <keithp@keithp.com>
952 Date: Sun May 17 22:24:53 2009 -0700
954 While on the pad, zero out velocity every second
956 We integrate acceleration to get velocity, but that means sitting on the pad
957 for a long time can add substantial error to the velocity value. Each
958 second, take the velocity value from a full second ago and subtract that out
959 of the current velocity. Once we detect boost, this will stop, which means
960 that as long as we detect boost within a second, we won't have subtracted
961 out any "real" velocity.
963 This keeps the pad velocity hovering around zero, which is pretty useful.
965 Signed-off-by: Keith Packard <keithp@keithp.com>
967 commit 1234694eb903b204488ddc7cb30bcfe34bf1e677
968 Author: Keith Packard <keithp@keithp.com>
969 Date: Sun May 17 01:29:06 2009 -0700
971 Clear table, reset log on disconnect
973 commit 4316b6af86b37522038e642235c163fcaad52e96
974 Author: Keith Packard <keithp@keithp.com>
975 Date: Sun May 17 01:28:16 2009 -0700
977 Add pad lat/lon, max accel, max height
979 Signed-off-by: Keith Packard <keithp@keithp.com>
981 commit 4348281bd788a13ea700413537f12da3c00356e4
982 Author: Keith Packard <keithp@keithp.com>
983 Date: Sun May 17 00:46:09 2009 -0700
987 Signed-off-by: Keith Packard <keithp@keithp.com>
989 commit ff68e38770351ddac3285ce275cd85adab01fd3d
990 Author: Keith Packard <keithp@keithp.com>
991 Date: Sun May 17 00:45:38 2009 -0700
993 Make aoview window taller
995 Signed-off-by: Keith Packard <keithp@keithp.com>
997 commit be3f4fed7b863c8cdaabe32b61b65a8b3cd11355
998 Author: Keith Packard <keithp@keithp.com>
999 Date: Sun May 17 00:13:45 2009 -0700
1001 Add lots more aoview UI bits
1003 Logs data to files, displays current state in window.
1005 Signed-off-by: Keith Packard <keithp@keithp.com>
1007 commit 93d7ce8e054515ed7b166eb042ae7f47e564d21d
1008 Author: Keith Packard <keithp@keithp.com>
1009 Date: Sat May 16 20:45:26 2009 -0700
1011 When logging starts up, right the whole ring to the log.
1013 This preserves the data pre boost-detect for later analysis.
1015 Signed-off-by: Keith Packard <keithp@keithp.com>
1017 commit fec4212a59a7b3321536b25707dcabc43c797c33
1018 Author: Keith Packard <keithp@keithp.com>
1019 Date: Sat May 16 20:04:31 2009 -0700
1021 Abandon use of accelerometer for apogee detect.
1023 Integrating the accelerometer data to compute velocity worked for one rocket
1024 flight, but additional testing shows that it doesn't work in other
1025 airframes. Until we figure out how this should work, we'll rely on the
1026 altimeter to detect apogee.
1028 Signed-off-by: Keith Packard <keithp@keithp.com>
1030 commit 09771c644de54ae354e8f98af7ba74289b3c0fcc
1031 Author: Keith Packard <keithp@keithp.com>
1032 Date: Sat May 16 02:25:04 2009 -0700
1034 Add preliminary aoview code
1036 AoView connects with TeleDongle to present telemetry information in a
1037 reasonable form. Right now, it just displays information to stdout, but it
1038 does have fancy dialogs for finding the USB devices.
1040 Signed-off-by: Keith Packard <keithp@keithp.com>
1042 commit 37250b00f6286aee4b3b28604f5d463db3079a89
1043 Author: Keith Packard <keithp@keithp.com>
1044 Date: Wed May 13 20:41:54 2009 -0700
1046 Discard usb output before connection. Handle USB reset.
1048 Discarding output before USB is plugged in allows threads that send output
1049 and do other things to work without a USB connection. Unfortuantely, there
1050 doesn't appear to be any way to detect when the USB link is disconnected,
1051 which means that once USB is enabled, future writes will continue to block.
1053 USB reset causes the USB interrupts to all be reconfigured back to power-on
1056 Signed-off-by: Keith Packard <keithp@keithp.com>
1058 commit 9b974217958b1017e62d6c4f4568f547ccc30c58
1059 Author: Keith Packard <keithp@keithp.com>
1060 Date: Wed May 13 20:40:42 2009 -0700
1062 Enable radio monitor by default in teleterra, teledongle and tidongle
1064 These ground loads want to monitor the radio constantly, and not require use
1065 of the 'm' command before listening.
1067 Signed-off-by: Keith Packard <keithp@keithp.com>
1069 commit 25fc03a333b2cfad0a93ebc385fbcf74b63c229e
1070 Author: Keith Packard <keithp@keithp.com>
1071 Date: Wed May 13 20:39:28 2009 -0700
1073 Remove monitor/rssi functions from telemetrum load
1075 Telemetrum is now a flight-only load, use teleterra or teledongle for ground
1078 Signed-off-by: Keith Packard <keithp@keithp.com>
1080 commit 05493b98eb1ae4d30cb0b600849d70b03fa33594
1081 Author: Keith Packard <keithp@keithp.com>
1082 Date: Wed May 13 20:38:11 2009 -0700
1084 Split out ao_state_names to separate file
1086 Allows state names to be used in programs without monitoring enabled.
1088 Signed-off-by: Keith Packard <keithp@keithp.com>
1090 commit d085d43701e3cdd2119e947a9ae45baa78c80318
1091 Author: Keith Packard <keithp@keithp.com>
1092 Date: Wed May 13 14:29:30 2009 -0700
1094 Indicate RSSI with a blinking LED
1096 Blink the red LED at a rate proportional to the RSSI value.
1098 Signed-off-by: Keith Packard <keithp@keithp.com>
1100 commit 055331d5f7d5adc40c348c3efd331a562dcda82a
1101 Author: Keith Packard <keithp@keithp.com>
1102 Date: Wed May 13 11:19:13 2009 -0700
1104 Make ao_flight_test show AGL altitude and positive acceleration under boost
1106 This makes the output more readable
1108 Signed-off-by: Keith Packard <keithp@keithp.com>
1110 commit d91208fbf5fc7797b93087ef8619454c4bed0130
1111 Author: Keith Packard <keithp@keithp.com>
1112 Date: Wed May 13 11:18:24 2009 -0700
1114 Make ao_flight_test able to read raw logging data
1116 Protect ao_flight_test reading functions so that a simple
1117 'script' output can be fed to the program and have it work correctly.
1119 Signed-off-by: Keith Packard <keithp@keithp.com>
1121 commit d3dbd8949e1102220ad5fd0863f493c819b96e46
1122 Author: Keith Packard <keithp@keithp.com>
1123 Date: Wed May 13 11:16:53 2009 -0700
1125 Print only RSSI when packet CRC is invalid
1127 Packets with invalid CRC usually contain bogus data, so don't print that,
1128 just print out the RSSI which may contain useful data.
1130 Signed-off-by: Keith Packard <keithp@keithp.com>
1132 commit 8168820b667cc1deffab64dd81cb4e6e2e6eabe4
1133 Author: Keith Packard <keithp@keithp.com>
1134 Date: Wed May 13 11:00:43 2009 -0700
1136 Accelerometer-based velocity values are invalid after apogee
1138 Because the orientation of the flight computer relative to the ground is
1139 unknown after apogee, the accelerometer data cannot be integrated to compute
1140 velocity. Main deploy is now based purely on barometric altitude and landing
1141 detection no longer checks for a low velocity value.
1143 Signed-off-by: Keith Packard <keithp@keithp.com>
1145 commit 24fdda44ff8604e40510b196ead17564d8f8cd3d
1146 Author: Keith Packard <keithp@keithp.com>
1147 Date: Wed May 13 10:59:04 2009 -0700
1149 Add velocity check for boost detect via accelerometer
1151 Bumping the rocket can cause a brief period of high acceleration, which may
1152 cause a mistaken boost detection. Require both a high acceleration and
1153 reasonable velocity to trigger boost phase.
1155 Signed-off-by: Keith Packard <keithp@keithp.com>
1157 commit 7a1aa3fdbc0d1fae5e7ee027bf8904598c6ebe41
1158 Author: Keith Packard <keithp@keithp.com>
1159 Date: Wed May 13 10:58:30 2009 -0700
1163 commit 497c89a7d08920630894b2605c3b6a0bdc4c229b
1164 Author: Keith Packard <keithp@keithp.com>
1165 Date: Sun May 10 23:11:06 2009 -0700
1167 Use recorded accelerometer baseline data in ao_flight_test
1169 With the flight computer recording a long-term average value for the
1170 accelerometer in the flight record, use that to prime the flight test code
1171 when running a log file through the simulator.
1173 Signed-off-by: Keith Packard <keithp@keithp.com>
1175 commit ba3c53636e485450f48093d0a88a6629775f7c3a
1176 Author: Keith Packard <keithp@keithp.com>
1177 Date: Sun May 10 23:01:16 2009 -0700
1179 Don't re-initialize the landing range data at each apogee detect sample
1181 The landing range values are used only after apogee detect, so we need only
1182 initialize them on the transition from apogee to drogue.
1184 Signed-off-by: Keith Packard <keithp@keithp.com>
1186 commit b623b1098bc7a10d471730259438fb82804221d0
1187 Author: Keith Packard <keithp@keithp.com>
1188 Date: Sun May 10 23:00:06 2009 -0700
1190 Initialize ao_min_vel with |ao_flight_vel|
1192 As ao_min_vel is stored as an absolute value, it's important to preserve
1193 that invariant, even though we don't expect ao_flight_vel to be negative at
1196 Signed-off-by: Keith Packard <keithp@keithp.com>
1198 commit e9584e846b9bd7926d61451d32ba5d7a30416f7b
1199 Author: Keith Packard <keithp@keithp.com>
1200 Date: Sun May 10 22:58:31 2009 -0700
1202 Decrease telemetry rate on the pad to 1/sec instead of 20/sec
1204 Transmitting telemetry through the radio consumes a significant amount of
1205 battery; reducing the rate to 1/sec will reduce power usage while waiting
1208 Signed-off-by: Keith Packard <keithp@keithp.com>
1210 commit 97cecb517cd7bf75e1219c76a93bfe6964c07052
1211 Author: Keith Packard <keithp@keithp.com>
1212 Date: Sun May 10 22:57:19 2009 -0700
1214 Increase the initial accel/baro average to 1000 samples
1216 To get an accurate baseline of the launchpad state, take a longer average of
1217 the two sensors as the unit boots up.
1219 Signed-off-by: Keith Packard <keithp@keithp.com>
1221 commit 98806b1ff3f41484663d61ff430e9e2764c7b5e6
1222 Author: Keith Packard <keithp@keithp.com>
1223 Date: Sun May 10 22:54:14 2009 -0700
1225 Record average accelerometer value in flight start log record
1227 The average accelerometer value cannot be extracted from the log as the
1228 record starts after that is computed. As that drives much of the
1229 accelerometer-based state transition logic, it is an important value to
1230 have, so we log it as part of the flight start record now.
1232 Signed-off-by: Keith Packard <keithp@keithp.com>
1234 commit a12edbfe21fe27a9efbf87bacda9ab4806256e2b
1235 Author: Keith Packard <keithp@keithp.com>
1236 Date: Sat May 9 10:24:10 2009 -0700
1238 Add version command to show product information
1240 commit e80b87f5e3ccf152d67a2e87bdefda161c455599
1241 Author: Keith Packard <keithp@keithp.com>
1242 Date: Sat May 9 10:23:49 2009 -0700
1244 Pad callsign with nuls
1246 commit beae3360828da21eb1a3c4f88e930f242d4e36b7
1247 Author: Keith Packard <keithp@keithp.com>
1248 Date: Fri May 1 08:14:57 2009 -0700
1250 USB spec limits bulk endpoints to 64 byte payload max.
1252 For full-speed devices, bulk endpoints may use 8, 16, 32 or 64 bytes, but no
1255 commit de7814c738488c2c16c6216c93fa78128895e5d5
1256 Author: Keith Packard <keithp@keithp.com>
1257 Date: Wed Apr 29 17:46:56 2009 -0700
1259 Use 'char' instead of 'uint8_t' for character data
1261 String and character constants are of char type, so using uint8_t causes
1262 promotion to 16-bit types when comparing the two.
1264 commit 4ae74fffb939d67424efa3e7f433637f1f920ebc
1265 Author: Keith Packard <keithp@keithp.com>
1266 Date: Wed Apr 29 17:46:36 2009 -0700
1268 Eliminate incorrect cast in printf string argument
1270 char * is a pointer to a string in the default address space, not a generic pointer
1271 to a string. As such, the compiler (at least 2.9.0) mis-compiles this if the
1274 commit 39f2a3c6bd501d12a92bfd38434ce67bb5beb70d
1275 Author: Keith Packard <keithp@keithp.com>
1276 Date: Wed Apr 29 17:44:41 2009 -0700
1278 Correct radio frequency shown in config display.
1280 Radio frequency base is 434.550, not 435.550
1282 commit 75ca1751b7cac2f8074d0713ee96d6ab45b54f19
1283 Author: Keith Packard <keithp@keithp.com>
1284 Date: Wed Apr 29 17:42:26 2009 -0700
1286 Reset landing interval tests at apogee
1288 This moves all of the interval management into the landing test code and
1289 out of the main loop. The interval is reset at apogee to make sure the
1290 sensors produce a stable reading for at least 20 seconds
1292 commit 7a1b77c2d7253a681389f32b70e2460aac188807
1293 Author: Bdale Garbee <bdale@gag.com>
1294 Date: Sun Apr 26 17:53:13 2009 -0600
1296 clean up host programs, too
1298 commit 5df80c346d65a9d56a8699b056dc44924acb31fe
1299 Author: Keith Packard <keithp@keithp.com>
1300 Date: Sun Apr 26 16:04:07 2009 -0700
1302 Was missing v_batt in adc dump command
1304 commit c3fec2c4c65db71e88ef0c05c69463438a7cfc6c
1305 Author: Keith Packard <keithp@keithp.com>
1306 Date: Sun Apr 26 15:38:28 2009 -0700
1308 Add manual ignition and igniter test commands
1310 commit 819f1de8dd6010fae050bcef930943c7923929f9
1311 Author: Keith Packard <keithp@keithp.com>
1312 Date: Sun Apr 26 15:38:03 2009 -0700
1314 Clean up commands a bit
1316 commit 178abb5c8439509926a5507911d7148b84f051b8
1317 Author: Keith Packard <keithp@keithp.com>
1318 Date: Sun Apr 26 15:08:58 2009 -0700
1320 Clear more files on make clean
1322 commit 70a69f3acdca27b80cdb2069de59bbc6dba83dbd
1323 Author: Keith Packard <keithp@keithp.com>
1324 Date: Sun Apr 26 15:05:29 2009 -0700
1326 Label binaries with product and serial info
1328 commit 5ed3b1cb52b573db1fee9655a29a0e6dd72f53fe
1329 Author: Keith Packard <keithp@keithp.com>
1330 Date: Sun Apr 26 01:37:02 2009 -0700
1332 Make sure full log is written and flushed on landing.
1334 The final state change to landing is recorded in the logging thread, so have
1335 that turn off logging once it has recorded that state. Then make it go to
1338 commit 2e737ad00cad5d893b252d8aa9dbff3d9b800731
1339 Author: Keith Packard <keithp@keithp.com>
1340 Date: Sun Apr 26 01:36:53 2009 -0700
1342 Clean up monitor output a bit
1344 commit 38a0b61b0a0b3c00f064c8d562950a17a6ddff4a
1345 Author: Keith Packard <keithp@keithp.com>
1346 Date: Sun Apr 26 00:11:32 2009 -0700
1348 Add configuration support
1350 Current config variables:
1351 Main deploy altitude above launch (in meters)
1352 Acceleration zero g calibration (manual or automatic)
1353 Radio channel (freq = 435.550MHz + channel * 100kHz)
1354 Callsign (max 8 characters)
1356 Supporting this involved shuffling code around so that the
1357 non-telemetrum builds could include only the stuff they needed.
1359 commit c65f1a1acd2ca00758833cec5d3f8056d303d3e2
1360 Author: Keith Packard <keithp@keithp.com>
1361 Date: Sat Apr 25 14:44:33 2009 -0700
1363 Allow for slower ADC operation. Add power saving code.
1365 This tries to make the flight computer use less power by disabling USB in
1366 flight mode, lowering the telemetry rate after ascent. It also disables the
1367 RDF beacon during ascent and re-enables it once descent has started.
1369 commit 8e7b48b5f090be81980ab00fbce814ae1cc253e4
1370 Author: Keith Packard <keithp@keithp.com>
1371 Date: Sat Apr 25 14:44:04 2009 -0700
1373 Allow ADC to be disabled
1375 commit 7bc3d9962872850e7b420221cf689db16b4305cc
1376 Author: Keith Packard <keithp@keithp.com>
1377 Date: Sat Apr 25 14:43:23 2009 -0700
1379 Place CPU in P0 state while idle
1381 commit e45fce7f82d704d677f84c69b0e07588d109d780
1382 Author: Keith Packard <keithp@keithp.com>
1383 Date: Sat Apr 25 14:42:20 2009 -0700
1385 Add RDF beacon and callsign to telemetry
1387 commit 61510f98404bca6861b2da98f6cd9ba9deb76968
1388 Author: Keith Packard <keithp@keithp.com>
1389 Date: Sat Apr 25 14:40:51 2009 -0700
1391 Add radio code to emit a 1kHz tone
1393 commit 0f07803d84b5ac89500ee33a6818c50583e3ff7f
1394 Author: Keith Packard <keithp@keithp.com>
1395 Date: Sat Apr 25 13:18:37 2009 -0700
1397 Allow the USB system to be disabled/enabled at run-time
1399 commit 45976af820fc41099928df71ea8304c56eb9fc7c
1400 Author: Keith Packard <keithp@keithp.com>
1401 Date: Sat Apr 25 13:16:27 2009 -0700
1403 Make LED usage depend on target device
1405 commit 4a050704ad2c497e9f1b0988334228b0bbc4c170
1406 Author: Keith Packard <keithp@keithp.com>
1407 Date: Sat Apr 25 13:13:24 2009 -0700
1409 Make some functions reentrant to save DSEG space
1411 commit 6b3d25a6d6d7847765eb03b836913dd5ecef2993
1412 Author: Keith Packard <keithp@keithp.com>
1413 Date: Fri Apr 24 19:17:37 2009 -0700
1415 Add monitor task to flight software
1417 Allows the use of telemetrum in teledongle mode.
1419 commit ad0d2d88a91cbd02c56ea5ff6dab23e16aec6510
1420 Author: Keith Packard <keithp@keithp.com>
1421 Date: Fri Apr 24 19:17:19 2009 -0700
1423 Report difference from ground to max altitude at landing
1425 commit f94ab879ff6f97708827c74facd11003a2d8b590
1426 Author: Keith Packard <keithp@keithp.com>
1427 Date: Fri Apr 24 19:16:29 2009 -0700
1429 Display data with units while running simulation
1431 commit 6fb26340b150e831a8a9e25e3b68074c29e48dbe
1432 Author: Keith Packard <keithp@keithp.com>
1433 Date: Fri Apr 24 19:13:31 2009 -0700
1435 Enabling apogee detect via speed: < 200m/s && < max_speed - 50m/s
1437 This change ensures that we actually got going fairly fast, and then slowed
1438 down a bunch before enabling apogee detect. Otherwise, we'll detect apogee
1439 right off the pad as we're not going very fast at that point...
1441 This also adds the 'f' command to show the current flight status on the USB
1444 commit 20b9f304ecbddd73a0ee2461b4c5e80f08157f98
1445 Author: Keith Packard <keithp@keithp.com>
1446 Date: Fri Apr 24 19:12:28 2009 -0700
1448 configure igniter ports, set values to measured ones
1450 commit 6bf1d91ce0b723abe2bcec89668c13135ec044cf
1451 Author: Keith Packard <keithp@keithp.com>
1452 Date: Fri Apr 24 19:11:40 2009 -0700
1454 Move ao_led_init to end of file to be consistent with other files
1456 commit b4de7d550ec9a09ccf5f6a72debc6646706e3516
1457 Author: Keith Packard <keithp@keithp.com>
1458 Date: Fri Apr 24 19:10:20 2009 -0700
1460 Define ao_state_names in ao.h so other people can share
1462 commit 8e62747b3692d0ac75b08eaf5c3e4b5d766be6ad
1463 Author: Keith Packard <keithp@keithp.com>
1464 Date: Fri Apr 24 19:09:31 2009 -0700
1468 commit 2f781beb73ef24ab5fbe2688a83d07ad26c15972
1469 Author: Keith Packard <keithp@keithp.com>
1470 Date: Fri Apr 24 19:09:09 2009 -0700
1472 Move beep_init to end of file to be consistent with other files
1474 commit b99315cee4ab796376458a2442cf36806fa4aed3
1475 Author: Keith Packard <keithp@keithp.com>
1476 Date: Fri Apr 24 10:19:31 2009 -0700
1478 Update flight algorithm based on data collected from SN-1 Flight 1
1480 This now correctly sequences through the flight data collected from the
1481 first TeleMetrum test flight.
1483 This also completes up the flight algorithm test harness (ao_flight_test),
1484 which runs the flight algorithm on the Linux host from a captured data log.
1486 commit b32f2f0090ff967edac07ae4d7a9895ed0b96d31
1487 Author: Keith Packard <keithp@keithp.com>
1488 Date: Thu Apr 23 22:17:44 2009 -0700
1490 Add igniters and update flight control algorithm
1492 commit f155333ae18a25068644792e8940269d9fb28033
1493 Author: Keith Packard <keithp@keithp.com>
1494 Date: Fri Apr 24 00:15:09 2009 -0700
1496 Avoid ram from 0xfda2 through feff, its funky
1498 commit f9c1c545c9dc11c3190a6cf7504883131fffce2f
1499 Author: Keith Packard <keithp@keithp.com>
1500 Date: Thu Apr 23 22:18:33 2009 -0700
1502 remove ao_flight_test until its ready
1504 commit 86e73c009f78dc4664883353124fc891fbb01dce
1505 Author: Keith Packard <keithp@keithp.com>
1506 Date: Thu Apr 23 20:50:07 2009 -0700
1508 Add teledongle module
1510 commit 204daac71ad56926730f5d6860bd70c645302e19
1511 Author: Keith Packard <keithp@keithp.com>
1512 Date: Thu Apr 23 14:26:01 2009 -0700
1514 Set telemetry rate to 100ms
1516 commit 306b28f632e21b42ab165e7944283cf9764b590e
1517 Author: Keith Packard <keithp@keithp.com>
1518 Date: Thu Apr 23 14:23:26 2009 -0700
1520 Wrong license on ao_monitor.c
1522 commit dca3a6de26d26c0020f3fb2cf5d8ac1552c195b1
1523 Author: Keith Packard <keithp@keithp.com>
1524 Date: Thu Apr 23 14:23:00 2009 -0700
1526 Crank up radio to 10dBm
1528 commit fbe3096f7e9a8112dbc79f376eccdaa6872ae520
1529 Author: Keith Packard <keithp@keithp.com>
1530 Date: Wed Apr 22 16:03:28 2009 -0700
1534 commit 9b7788f18bbaf3c4e5ebbf6c5ebd926468b0e045
1535 Author: Keith Packard <keithp@keithp.com>
1536 Date: Wed Apr 22 15:55:01 2009 -0700
1538 Clean up TeleTerra files
1540 commit 61cee50c86e275f9fde875bd317c3e74255394ec
1541 Author: Keith Packard <keithp@keithp.com>
1542 Date: Wed Apr 22 15:53:55 2009 -0700
1544 simplify ao_time function
1546 commit 3703ecdc9e190f2e0b7ead0e71b78be881c1f3b7
1547 Author: Keith Packard <keithp@keithp.com>
1548 Date: Wed Apr 22 15:53:46 2009 -0700
1550 One line radio status
1552 commit 1fbb3c17672a03ea6318fee07f9c2dcd7a8d0b16
1553 Author: Keith Packard <keithp@keithp.com>
1554 Date: Wed Apr 22 15:49:16 2009 -0700
1556 Add new binaries to .gitignore
1558 commit 00d5610caff61559eb24c24beaa56629d6bb03be
1559 Author: Keith Packard <keithp@keithp.com>
1560 Date: Wed Apr 22 15:49:00 2009 -0700
1562 Speed up dbg port bit frobbing
1564 commit c7555eb16876aa8ff9fe7f648d325a1b8fb54d23
1565 Author: Keith Packard <keithp@keithp.com>
1566 Date: Wed Apr 22 15:48:28 2009 -0700
1570 commit ada6dea04b94be016598566c4c13e6105aaec353
1571 Author: Keith Packard <keithp@keithp.com>
1572 Date: Wed Apr 22 15:48:14 2009 -0700
1574 Clean up task list formatting
1576 commit 0a1b2297ee9f5bbb918bd72f26088a3e0b84839a
1577 Author: Keith Packard <keithp@keithp.com>
1578 Date: Wed Apr 22 15:47:57 2009 -0700
1580 Control radio monitoring with the M command
1582 commit 837c620f07b63efc171be3ac14c78bc99adf7592
1583 Author: Keith Packard <keithp@keithp.com>
1584 Date: Wed Apr 22 14:25:43 2009 -0700
1586 Shrink USB output buffers, work around USB packet errors
1588 commit d87e9c25947d7cc2eba8894a524977f2c55a089a
1589 Author: Keith Packard <keithp@keithp.com>
1590 Date: Tue Apr 21 02:07:24 2009 -0700
1592 Clean up telemetry now that all packets are the same
1594 commit 1b333def5052d2ed47fdeaef23a897fe326f6340
1595 Author: Keith Packard <keithp@keithp.com>
1596 Date: Tue Apr 21 02:07:08 2009 -0700
1598 Add longer debug delays to reset/debug_mode entry
1600 commit d1887ded41a5bfec8e10e9fd736fa9444b9b6222
1601 Author: Keith Packard <keithp@keithp.com>
1602 Date: Tue Apr 21 01:17:03 2009 -0700
1604 Fix up fancy dbg stuff. Add teleterra initial bits.
1606 The dbg stuff needed a bit of help to actually walk the tables; it appears
1607 that complex expressions confuse sdcc.
1609 This also adds primitive teleterra bits, but no UI, etc.
1611 Signed-off-by: Keith Packard <keithp@keithp.com>
1613 commit 43c8f7012102cdb591ace899420c10e4a78385ad
1614 Author: Keith Packard <keithp@keithp.com>
1615 Date: Mon Apr 20 23:33:41 2009 -0700
1617 Add radio support. Build separate executables for TeleMetrum and the TI dongle
1619 Ok, way too big a patch, but things were in rough shape.
1620 This patch adds support for the radio, both transmit and receive.
1621 Then, because I could no longer run the TeleMetrum code on the TI
1622 dongle, I ended up building a separate image for the TI board, which
1623 involved creating a mechanism for having multiple command sets and splitting
1624 code for different functions into different files.
1626 commit 5be13b76a2e29b84cd6d1eec065e3354b0dafce5
1627 Author: Keith Packard <keithp@keithp.com>
1628 Date: Sat Apr 18 23:19:24 2009 -0700
1630 Start using pdata area for less-frequently used data
1632 commit 3e18b5a0d4c7d84df98b6ed0b7783de1d42d45bf
1633 Author: Keith Packard <keithp@keithp.com>
1634 Date: Sat Apr 18 23:19:05 2009 -0700
1636 Slow down panic presentation
1638 commit c4e983daa4579896b227fdcb2be43fad75e94307
1639 Author: Keith Packard <keithp@keithp.com>
1640 Date: Sat Apr 18 23:17:45 2009 -0700
1642 Parse GPS data locally. Add 'g' command to display recent GPS results.
1644 This parses the GPS GGA message and stores it in a global variable,
1645 protected by a mutex.
1647 commit ed6f67dc47d750d5ff8bea63ae7cbb560689b9b6
1648 Author: Keith Packard <keithp@keithp.com>
1649 Date: Sat Apr 18 23:16:01 2009 -0700
1651 Add task names and 'T' command to show task status.
1653 The T command shows the current wchan and PC for each task in the system.
1655 commit 3d5a5fc4db5f681e848202c4ee4099d2879677d6
1656 Author: Keith Packard <keithp@keithp.com>
1657 Date: Sat Apr 18 19:32:18 2009 -0700
1659 Fix GPL version at 2
1661 Signed-off-by: Keith Packard <keithp@keithp.com>
1663 commit 022f83ca6fd589005d8eb3e25e633950fef69fa7
1664 Author: Keith Packard <keithp@keithp.com>
1665 Date: Fri Apr 17 23:38:14 2009 -0700
1667 Add gps, debug dongle support and pressure alt tables
1669 GPS also pulled in serial support. The altitude tables take raw 11-bit
1670 pressure sample numbers and convert them to standard pressure altitude
1673 Signed-off-by: Keith Packard <keithp@keithp.com>
1675 commit 31fce622b1bab7e3f421069d7f6d4d9bdcd825de
1676 Author: Keith Packard <keithp@keithp.com>
1677 Date: Fri Apr 17 10:32:45 2009 -0700
1679 Enable FEC in radio packets
1681 commit 293a357911090a2f37bdd6f7ea96942079ffdf2e
1682 Author: Keith Packard <keithp@keithp.com>
1683 Date: Fri Apr 17 10:29:42 2009 -0700
1685 Add CRC to radio packets
1687 commit 20834caf01ddf481e8362b0d2627ef383a82e09d
1688 Author: Keith Packard <keithp@keithp.com>
1689 Date: Fri Apr 17 10:23:10 2009 -0700
1693 commit 94e5343a72121a81ab19bf5025e6b6fc9847eb4f
1694 Author: Keith Packard <keithp@keithp.com>
1695 Date: Fri Apr 17 10:19:25 2009 -0700
1697 Add packet status byte defines
1699 commit 04bc51c170c6f22bb5cc16867ce9a307818a7a00
1700 Author: Keith Packard <keithp@keithp.com>
1701 Date: Fri Apr 17 10:11:31 2009 -0700
1703 Add separate xmit/recv programs to radio demo
1705 commit fafe55c3405964e0defdf25b6c00236f9aaefbc5
1706 Author: Keith Packard <keithp@keithp.com>
1707 Date: Fri Apr 17 10:11:11 2009 -0700
1709 Get env var for debug method selection
1711 commit 26095fc0511ee0d5213f038986032f7c59964cf0
1712 Author: Keith Packard <keithp@keithp.com>
1713 Date: Fri Apr 17 10:10:47 2009 -0700
1715 Run-time selection between cp2103 and cc1111
1717 commit 543bedde83cbce5145668e72965e02d892187b59
1718 Author: Keith Packard <keithp@keithp.com>
1719 Date: Thu Apr 16 20:38:14 2009 -0700
1723 commit 5e2393eb6b1a6d7b180bd63d5165ee7b7ff5f9e0
1724 Author: Keith Packard <keithp@keithp.com>
1725 Date: Wed Apr 15 14:25:26 2009 -0700
1727 Move a bunch of variables from __data to __xdata
1729 commit 4d1091d9bd121f05f5fe0a9c9d2bc0da8c562b9a
1730 Author: Keith Packard <keithp@keithp.com>
1731 Date: Tue Apr 14 21:25:15 2009 -0700
1733 Slow down panic code, disable interrupts
1735 commit 545478dd02eaeff6a65d318e722b1e4fce5e01b4
1736 Author: Keith Packard <keithp@keithp.com>
1737 Date: Tue Apr 14 21:24:25 2009 -0700
1739 Keep reporting flight state while it changes
1741 commit 9605045164882b4ca3d1317ac860b02513a51f30
1742 Author: Keith Packard <keithp@keithp.com>
1743 Date: Tue Apr 14 21:23:55 2009 -0700
1745 use red LED to indicate system startup
1747 commit dc844ee7e49a3b6145b3165252a592ed070d600f
1748 Author: Keith Packard <keithp@keithp.com>
1749 Date: Tue Apr 14 21:23:13 2009 -0700
1751 Use ao_ee_flush_internal while holding mutex
1753 commit 5e45d1c89b00e74d5b2730345843f43aab516af2
1754 Author: Keith Packard <keithp@keithp.com>
1755 Date: Tue Apr 14 21:22:56 2009 -0700
1757 Leave beeping and lights to the flight code
1759 commit 902c342289c1d13a4d55b9224acb6d67578b7a60
1760 Author: Keith Packard <keithp@keithp.com>
1761 Date: Tue Apr 14 21:22:31 2009 -0700
1763 Make mutex functions reentrant
1765 commit acc4fc635edb70ec1ba2dff9f7ac0c8542c72c47
1766 Author: Keith Packard <keithp@keithp.com>
1767 Date: Tue Apr 14 19:08:01 2009 -0700
1769 Add in existing flight pieces: flight/report/log
1771 These pieces come from the old telemetrum firmware.
1773 Signed-off-by: Keith Packard <keithp@keithp.com>
1775 commit ac99982b10fd5772218660137ee21db9b90cd885
1776 Author: Keith Packard <keithp@keithp.com>
1777 Date: Tue Apr 14 14:21:56 2009 -0700
1779 Add eeprom driver and command loop
1781 This involved adding dma control and a mutex implementation.
1783 Signed-off-by: Keith Packard <keithp@keithp.com>
1785 commit fbd8f4aff5058f4d371596b04715b7cb6d38e729
1786 Author: Keith Packard <keithp@keithp.com>
1787 Date: Tue Apr 14 11:04:09 2009 -0700
1789 Switch from --model-large to --model-small
1791 This shrinks the application quite a bit, and should make it faster as well.
1793 Signed-off-by: Keith Packard <keithp@keithp.com>
1795 commit fb63262699d3a6fbf347d24efda8b01f75b7d0d3
1796 Author: Keith Packard <keithp@keithp.com>
1797 Date: Tue Apr 14 10:02:19 2009 -0700
1799 Add comments, clean up white space, etc.
1801 Various clean ups now that the basic code appears to work.
1803 Signed-off-by: Keith Packard <keithp@keithp.com>
1805 commit 7e4abf3a40c39d0ce4f466281bef9a464df85dd4
1806 Author: Keith Packard <keithp@keithp.com>
1807 Date: Mon Apr 13 21:58:07 2009 -0700
1809 Switch USB to double-buffered
1811 commit b56a44e48552bc32dbba9ff21770c370219a684a
1812 Author: Keith Packard <keithp@keithp.com>
1813 Date: Mon Apr 13 21:51:59 2009 -0700
1815 Fix USB input/output by reloading packet limits.
1817 The USB controller is reset during the connection process, which clears the
1818 packet limits set in the controller at initialization time. Reload those
1819 values when the configuration is set.
1821 Signed-off-by: Keith Packard <keithp@keithp.com>
1823 commit cdaf3fc5802acf2ddc7972a15649ab0e1b31b873
1824 Author: Keith Packard <keithp@keithp.com>
1825 Date: Mon Apr 13 20:39:46 2009 -0700
1827 USB working up through reading strings
1829 commit c5c1e3fb1c253d387be02c127253ac2a55d577b4
1830 Author: Keith Packard <keithp@keithp.com>
1831 Date: Mon Apr 13 13:51:08 2009 -0700
1835 This offers a single CDC ACM device over USB.
1837 Signed-off-by: Keith Packard <keithp@keithp.com>
1839 commit f3f25a1cec7d2a034aa544569cfd23bea1a996c5
1840 Author: Keith Packard <keithp@keithp.com>
1841 Date: Sun Apr 12 23:53:55 2009 -0700
1843 Add beep/led support.
1845 Support our P2_0 connected buzzer, and formalize LED output support.
1847 Signed-off-by: Keith Packard <keithp@keithp.com>
1849 commit e14f07bfdb8824fc7ed6df1129c66ee39ffd6d54
1850 Author: Keith Packard <keithp@keithp.com>
1851 Date: Sun Apr 12 23:17:16 2009 -0700
1855 Sample A/D at the timer tick, placing data in a ring
1858 Signed-off-by: Keith Packard <keithp@keithp.com>
1860 commit 823f4f92de0c1f8dd7a644a8e56ffe9822bee6e2
1861 Author: Keith Packard <keithp@keithp.com>
1862 Date: Sun Apr 12 22:52:47 2009 -0700
1866 Use Timer 1 to generate a 100Hz timer interrupt
1868 commit 650a77e209dbb54c8d8fd9824cee430985564973
1869 Author: Keith Packard <keithp@keithp.com>
1870 Date: Sun Apr 12 21:58:49 2009 -0700
1874 commit 870e98334018a66de8a6e4a659d2dc5dee1cbecf
1875 Author: Keith Packard <keithp@keithp.com>
1876 Date: Sun Apr 12 21:52:56 2009 -0700
1880 commit 11c526bdcbf4012e18fbfdc29ca8832870ca38f0
1881 Author: Keith Packard <keithp@keithp.com>
1882 Date: Sun Apr 12 21:47:32 2009 -0700
1884 Add load command to s51
1886 commit 55402ba3e87fd699c51079843309f1f0d1534724
1887 Author: Keith Packard <keithp@keithp.com>
1888 Date: Sun Apr 12 21:33:55 2009 -0700
1890 Make test more complicated
1892 commit 3d3f849c9af9028f667cef4afedc0798d39a9efc
1893 Author: Keith Packard <keithp@keithp.com>
1894 Date: Sun Apr 12 21:33:46 2009 -0700
1896 SP points at last pushed byte
1898 commit f72c4cbc8fd9412dd1cce0fc446e7bbd2edc2d34
1899 Author: Keith Packard <keithp@keithp.com>
1900 Date: Sun Apr 12 20:27:03 2009 -0700
1904 commit 1903a86bf2cc6b685ccc475e62eabe49a4ec5b43
1905 Author: Keith Packard <keithp@keithp.com>
1906 Date: Sun Apr 12 20:25:39 2009 -0700
1908 Initial AltOS import
1910 commit 5221dc63cf3a059a32aca2bfa7828c215be814a1
1911 Author: Keith Packard <keithp@keithp.com>
1912 Date: Sun Apr 12 12:38:58 2009 -0700
1916 commit ee110425fb814780476d1d3d8a257af126f41763
1917 Author: Keith Packard <keithp@keithp.com>
1918 Date: Mon Apr 6 17:09:23 2009 -0700
1920 Bump buffer pointer as data is written to cc-usb
1922 commit 2d9b8a83a2d9f495199033e43f519d26f27938fe
1923 Author: Keith Packard <keithp@keithp.com>
1924 Date: Mon Apr 6 11:31:49 2009 -0700
1926 Add support for a serial-connected custom debug dongle
1928 This uses the cc1111 board as a custom debug dongle with faster
1929 methods for communicating with the debug target.
1931 commit 24edd56155ed0fa02fdd8f66fdc7aa5a1021bf7d
1932 Author: Keith Packard <keithp@keithp.com>
1933 Date: Wed Apr 1 17:50:47 2009 -0700
1935 Reset cc1111 on s51 exit
1937 commit 5fcfe854d29e1862d9a6adcbef3ef5119eb52fa3
1938 Author: Keith Packard <keithp@keithp.com>
1939 Date: Wed Apr 1 00:06:45 2009 -0700
1941 Add timer-based beep test
1943 commit 91607bebdd167ac632aca4b66e22cb0cabdf0d20
1944 Author: Keith Packard <keithp@keithp.com>
1945 Date: Thu Mar 26 22:41:47 2009 -0700
1947 Add readline support to s51
1949 commit 66ee94ed10e3d79b24f45a5c63e58456d4d30343
1950 Author: Keith Packard <keithp@keithp.com>
1951 Date: Wed Mar 25 11:37:48 2009 -0700
1953 Deal with MSB-outputing DMA engine
1955 commit d3732fd405af03c3752a84c4b78da7ef5ebd3744
1956 Author: Keith Packard <keithp@keithp.com>
1957 Date: Wed Mar 25 11:14:03 2009 -0700
1959 Flip ADC bytes around
1961 commit 50cc8e97e76d9b60c622962e1c74cf422dfb2c0f
1962 Author: Keith Packard <keithp@keithp.com>
1963 Date: Wed Mar 25 11:01:30 2009 -0700
1965 Add spacing for serial adc data
1967 commit 5577ca3762bfc000b0bc3782c73a8f95996a28a6
1968 Author: Keith Packard <keithp@keithp.com>
1969 Date: Wed Mar 25 10:58:57 2009 -0700
1971 Inc only one on dest addr
1973 commit 378227d869a3e8787c532c8c4e1563b44002c4b5
1974 Author: Keith Packard <keithp@keithp.com>
1975 Date: Wed Mar 25 10:55:17 2009 -0700
1977 Dump remaining inputs
1979 commit f54a41e37d6897db2e24fbc82880076b78a0ae41
1980 Author: Keith Packard <keithp@keithp.com>
1981 Date: Wed Mar 25 10:50:36 2009 -0700
1983 Remove poll for ti demo button
1985 commit 2b93a70fdd9e47e8195855451aa19ecad5d8b068
1986 Author: Keith Packard <keithp@keithp.com>
1987 Date: Wed Mar 25 10:50:14 2009 -0700
1989 Add adc to serial conversion
1991 commit d9fd548db15232e3a8823815962b252c7a5e7cba
1992 Author: Keith Packard <keithp@keithp.com>
1993 Date: Wed Mar 25 10:04:50 2009 -0700
1995 Add ADC via DMA example
1997 commit 61faf2b773300988fe27cfde5bc045be9950a1b0
1998 Author: Keith Packard <keithp@keithp.com>
1999 Date: Wed Mar 25 09:45:14 2009 -0700
2003 commit 7b3fdf5b42c9be9bebc1ceb7a52ff0f5a2a28fcd
2004 Author: Keith Packard <keithp@keithp.com>
2005 Date: Wed Mar 25 01:05:36 2009 -0700
2009 commit 31d59b88baa2cd96dc6263d1c5877283f2cd8c36
2010 Author: Keith Packard <keithp@keithp.com>
2011 Date: Wed Mar 25 01:03:08 2009 -0700
2013 Make radio test compile again
2015 commit 9ce713fdd19bf1a51370dacba3670504356c5c11
2016 Author: Keith Packard <keithp@keithp.com>
2017 Date: Wed Mar 25 01:02:07 2009 -0700
2019 Wait for xtal to stabilize
2021 commit ffd43886dc902f3bb7407294018e3d62cac39480
2022 Author: Keith Packard <keithp@keithp.com>
2023 Date: Wed Mar 25 00:55:11 2009 -0700
2027 commit 029963cc94fbb47560118b5de73c537e2c14ed7c
2028 Author: Keith Packard <keithp@keithp.com>
2029 Date: Wed Mar 25 00:50:02 2009 -0700
2031 Eliminate array walking
2033 commit 019456a17d36f8f9f9b72cfbc980492175086d32
2034 Author: Keith Packard <keithp@keithp.com>
2035 Date: Wed Mar 25 00:41:49 2009 -0700
2037 Add a per-char delay
2039 commit cfaf187e96ba98eb8dd934409a10bc70273fe68a
2040 Author: Keith Packard <keithp@keithp.com>
2041 Date: Wed Mar 25 00:36:35 2009 -0700
2043 Use UTX1IF to wait for serial TX complete
2045 commit 006124529b243c7657a94312d2c868a82878d8bb
2046 Author: Keith Packard <keithp@keithp.com>
2047 Date: Wed Mar 25 00:29:29 2009 -0700
2049 Send more interesting text
2051 commit 5049acd3d1ae42304513f667f55a2ddffa4c685a
2052 Author: Keith Packard <keithp@keithp.com>
2053 Date: Wed Mar 25 00:24:56 2009 -0700
2055 More random serial bit frobbing
2057 commit 50bdc2407c674a4770912d3a626f36820a7f1527
2058 Author: Keith Packard <keithp@keithp.com>
2059 Date: Wed Mar 25 00:13:15 2009 -0700
2061 Flip serial TX code around a bit
2063 commit 7b7617e376afe0df1d505375b76198358330370c
2064 Author: Keith Packard <keithp@keithp.com>
2065 Date: Wed Mar 25 00:09:47 2009 -0700
2067 Try serial polarity high/high
2069 commit 18edacdb1e6e429cc29a164e22ef2a566096b9d9
2070 Author: Keith Packard <keithp@keithp.com>
2071 Date: Wed Mar 25 00:06:32 2009 -0700
2073 Make serial test simpler
2075 commit 62744c186792739c3bf5798c80ff87c69fbe2b65
2076 Author: Keith Packard <keithp@keithp.com>
2077 Date: Wed Mar 25 00:03:45 2009 -0700
2079 Flip start/stop bits around
2081 commit 9e96107d5d1a9681b07c36bb5860c748bfe10ec0
2082 Author: Keith Packard <keithp@keithp.com>
2083 Date: Tue Mar 24 23:57:12 2009 -0700
2087 commit c41ceb9a488b2209d1d3c09967d1473ce608030f
2088 Author: Keith Packard <keithp@keithp.com>
2089 Date: Tue Mar 24 23:24:01 2009 -0700
2091 Change radio to -30dBm
2093 commit c35de083ca3d4f362063b056a0fd74ffe629d168
2094 Author: Keith Packard <keithp@keithp.com>
2095 Date: Tue Mar 24 23:11:48 2009 -0700
2097 Add serial test program
2099 commit 8ecbd8734f0fb5588b2a8eb20720cfc6f43dfb47
2100 Author: Keith Packard <keithp@keithp.com>
2101 Date: Tue Mar 24 22:37:38 2009 -0700
2103 Wait for xtal to stabilize after changing to 24MHz
2105 commit e120269fc0f8e14ddf1755337b1d092173e16da2
2106 Author: Keith Packard <keithp@keithp.com>
2107 Date: Tue Mar 24 22:21:31 2009 -0700
2109 Actually return byte read from SPI
2111 commit de1ac6f99a1526fa840a52cfc10fa3edc0589bed
2112 Author: Keith Packard <keithp@keithp.com>
2113 Date: Tue Mar 24 22:12:51 2009 -0700
2115 Clear UxCSR_TX_BYTE after transmitting a byte
2117 commit 3ed3ff63e46767a256d30c5da5c52ae20089a91d
2118 Author: Keith Packard <keithp@keithp.com>
2119 Date: Tue Mar 24 20:04:58 2009 -0700
2123 commit 91b3a6ae74184692f45702587c4d678b2799ad8c
2124 Author: Keith Packard <keithp@keithp.com>
2125 Date: Tue Mar 24 19:55:04 2009 -0700
2127 actually write and compare SPI test bits
2129 commit 7de3a43887485c3c6cf52960376ccde33fb33985
2130 Author: Keith Packard <keithp@keithp.com>
2131 Date: Tue Mar 24 19:54:02 2009 -0700
2133 Add USART-based SPI test code
2135 commit ef0eef68280e9b6ca5e3bb71062e23054340e1ed
2136 Author: Keith Packard <keithp@keithp.com>
2137 Date: Tue Mar 24 17:22:36 2009 -0700
2139 Change spi test string
2141 commit 8131389ee5018c05b721146a98367150cf500fdf
2142 Author: Keith Packard <keithp@keithp.com>
2143 Date: Tue Mar 24 17:15:09 2009 -0700
2145 Oops, not merging in the bit read for SPI test
2147 commit 3429016d1359ec650993d2fb0596184e3f717871
2148 Author: Keith Packard <keithp@keithp.com>
2149 Date: Tue Mar 24 17:04:45 2009 -0700
2151 Adjust clock/data phase for spi test
2153 commit fedd18b28ea54e1dabcd2f9e8cab3ae4ee0fd070
2154 Author: Keith Packard <keithp@keithp.com>
2155 Date: Tue Mar 24 16:35:13 2009 -0700
2157 MISO needs to be an input
2159 commit f0c233f25a208a636833312b1766825815735304
2160 Author: Keith Packard <keithp@keithp.com>
2161 Date: Tue Mar 24 15:41:55 2009 -0700
2163 Add bit-banging spi eeprom test program
2165 commit 6eeee64cf16ccc9218dbdde5426f25bda5e3407f
2166 Author: Bdale Garbee <bdale@gag.com>
2167 Date: Wed Mar 18 02:58:33 2009 -0600
2169 working beep at around 4khz
2171 commit 4726317de811c20e8d6754762437b5c9cbb3a48c
2172 Author: Keith Packard <keithp@keithp.com>
2173 Date: Wed Mar 18 01:54:34 2009 -0700
2175 Add simple test program to light up the transmitter at 434.550MHz
2177 This starts a transmit sequence, but doesn't send any data so the
2178 transmitter just locks on.
2180 commit a0a27600ee2bf237e74eb83767a8d2e7c91df24f
2181 Author: Keith Packard <keithp@keithp.com>
2182 Date: Sun Mar 15 18:14:21 2009 -0700
2184 Correctly comment which bit the beep program uses
2186 commit 25b77d236c01258abfc03114c2fc9ea2d69ca6e7
2187 Author: Keith Packard <keithp@keithp.com>
2188 Date: Sun Mar 15 18:11:53 2009 -0700
2190 Add telemetrum beeper example
2192 commit 164b4e4749ad64ebbe26e84fd7b4fa1aa733dbe4
2193 Author: Keith Packard <keithp@keithp.com>
2194 Date: Sun Mar 15 18:11:20 2009 -0700
2196 sdcc gets the lib path correct based on the model
2198 commit 04a316133af93b79bfbebb91f05eec1015ec2abc
2199 Author: Keith Packard <keithp@keithp.com>
2200 Date: Sun Mar 15 18:10:43 2009 -0700
2202 Bump debug speed back up
2204 commit 9fd63972758d6d5572f7bcaadec9b1c0e974a2e8
2205 Author: Keith Packard <keithp@keithp.com>
2206 Date: Sat Mar 7 21:05:40 2009 -0800
2208 Only flip changing bits in async mode
2210 commit c8fd04e154bcfd65ae1200980bd8163caabd7fe4
2211 Author: Keith Packard <keithp@keithp.com>
2212 Date: Sat Mar 7 21:05:06 2009 -0800
2214 The debug port only works if reset is higher than clock. weird
2216 commit ade11f88754b4ab0386ebf86afc5257e59238f62
2217 Author: Keith Packard <keithp@keithp.com>
2218 Date: Sat Mar 7 21:04:38 2009 -0800
2220 Make manual bit flipping sync after every transaction
2222 commit e63b5271bb54afc36e4b9891e51e053ff6011092
2223 Author: Keith Packard <keithp@keithp.com>
2224 Date: Sat Mar 7 14:49:22 2009 -0800
2228 commit 77d754afc2d14aaa4413c13ebe3777ef385f62a9
2229 Author: Keith Packard <keithp@keithp.com>
2230 Date: Sat Mar 7 14:48:49 2009 -0800
2232 Sync after manual bit reading
2234 commit 5a338c8a7394d003355f96a8777b6fe83bb8493c
2235 Author: Keith Packard <keithp@keithp.com>
2236 Date: Sat Mar 7 14:48:35 2009 -0800
2238 Flip debug pins around to match telemetrum
2240 commit cc0495b7028f4b1189a00707d828a68534d1dea2
2241 Author: Keith Packard <keithp@keithp.com>
2242 Date: Fri Mar 6 22:52:35 2009 -0800
2244 Wait for a while when switching the RESET_N line
2246 The cc1111 manual suggests placing a 2.7kΩ resister and 1nF capacitor on the
2247 RESET_N line to filter out noise. This increases the time necessary to reset
2248 the chip to several microseconds which is longer than the interval between
2249 two USB packets. Flush the USB packet queue and sleep for a while after
2250 changing the value on the RESET_N line to make sure the chip sees the state
2253 Signed-off-by: Keith Packard <keithp@keithp.com>
2255 commit 41289e6d8f1767547a33fea349866e928e44910f
2256 Author: Bdale Garbee <bdale@gag.com>
2257 Date: Mon Mar 2 07:46:20 2009 -0700
2259 minor s51.1 formatting fixes
2261 Signed-off-by: Keith Packard <keithp@keithp.com>
2263 commit fdee231ed097a4348aee78fbd4aa92826b80de03
2264 Author: Keith Packard <keithp@keithp.com>
2265 Date: Sun Mar 1 23:12:31 2009 -0800
2269 This documents (briefly) the s51 hex debugging interface program, including
2270 some simple commands to test the operation of the system interactively.
2272 Signed-off-by: Keith Packard <keithp@keithp.com>
2274 commit f7d91bd23b8214e09deae0aafb516331e934c49b
2275 Author: Keith Packard <keithp@keithp.com>
2276 Date: Sun Mar 1 18:43:03 2009 -0800
2278 Sometimes the link breaks and the GET_PC command returns garbage
2280 commit 3cc8d11eb8d5d0b42141dd84a58d461287f59e3a
2281 Author: Keith Packard <keithp@keithp.com>
2282 Date: Sun Jan 25 08:38:48 2009 -0800
2284 Support 'set' command
2286 The 'set' command modifies target memory and registers
2288 Signed-off-by: Keith Packard <keithp@keithp.com>
2290 commit 60940b4be23962db79b8e914ec943d0636dd68ad
2291 Author: Keith Packard <keithp@keithp.com>
2292 Date: Mon Jan 5 21:45:21 2009 -0800
2294 Expose ccdbg_set_clock API
2296 This allows applications to change the debug port clock
2299 Signed-off-by: Keith Packard <keithp@keithp.com>
2301 commit eb09e61b0682eb2aeac8e1a34d58b897ba6db8e7
2302 Author: Keith Packard <keithp@keithp.com>
2303 Date: Mon Jan 5 21:44:44 2009 -0800
2305 Use custom sdcc libraries (this needs to be configured...)
2307 Signed-off-by: Keith Packard <keithp@keithp.com>
2309 commit 1ccfe0887c794397131ab1c986c25f66eea86a6c
2310 Author: Keith Packard <keithp@keithp.com>
2311 Date: Mon Jan 5 21:43:44 2009 -0800
2313 Have S51 ignore SIGINT while running under sdcdb.
2315 This prevents keyboard interrupts from accidentally stopping
2318 Signed-off-by: Keith Packard <keithp@keithp.com>
2320 commit 7c03937b36aac82b08f4ea0c6da33a994fe15ec7
2321 Author: Keith Packard <keithp@keithp.com>
2322 Date: Tue Dec 30 22:40:13 2008 -0800
2324 Add simple and timer sample programs
2326 Signed-off-by: Keith Packard <keithp@keithp.com>
2328 commit 6c2a65c743a4ffae96ed27dbc38c1bf9242ed1df
2329 Author: Keith Packard <keithp@keithp.com>
2330 Date: Tue Dec 30 22:35:53 2008 -0800
2332 Save/restore registers to host during memory operations. Cache ROM data.
2334 Because the debug port uses instructions for most operations, the debug code
2335 will clobber registers used by the running program. Save and restore these
2336 to avoid corrupting application data.
2338 If the ROM file is known, use that to return data instead of fetching it
2339 from the target to improve performance.
2341 Signed-off-by: Keith Packard <keithp@keithp.com>
2343 commit ea366058aa467a8a7caf17e7014758f3741ea7f7
2344 Author: Keith Packard <keithp@keithp.com>
2345 Date: Mon Dec 29 12:35:11 2008 -0800
2347 Fix flashing less than a full page of data. Verify page at a time.
2349 The 8051 flashing code requires special help with counts with non-zero low
2350 byte. Also, instead of verifying the entire flash contents at the end,
2351 verify each page as it goes.
2353 Signed-off-by: Keith Packard <keithp@keithp.com>
2355 commit e0697186a2f9b6139636ff5d5c162879c85caf9c
2356 Author: Keith Packard <keithp@keithp.com>
2357 Date: Sun Dec 28 00:11:13 2008 -0800
2359 Use SFR access funcs. Support 'dump' command. Add -m (monitor) flag.
2361 Not all SFRs are visible in the unified address space, so the SFR-specific
2362 accessors are required.
2364 The dump command is the same as the various 'd*'
2365 commands, but also supports dumping program memory.
2367 The new -m (monitor) flag watches the command stream between s51 and sdcdb.
2369 Signed-off-by: Keith Packard <keithp@keithp.com>
2371 commit 23aca1fcbc169184e32d4ec19f28dd4fd4cfda36
2372 Author: Keith Packard <keithp@keithp.com>
2373 Date: Sun Dec 28 00:09:30 2008 -0800
2375 Save/restore regs when reading/writing memory. Add SFR access.
2377 The DPL and ACC registers are used by the memory access code,
2378 so they need to be saved and restored. Stuff them up high in ram for now;
2379 this should probably be fixed to pull them back to the host instead.
2381 Special SFR access is required as not all SFRs are visible in the unified
2384 Signed-off-by: Keith Packard <keithp@keithp.com>
2386 commit 1405838160b69e2cda456e21502a1d03b3aa7548
2387 Author: Keith Packard <keithp@keithp.com>
2388 Date: Sat Dec 27 11:25:58 2008 -0800
2390 s51: get start address from ihx file. re-enable breakpoints after reset.
2392 Use the start of the ihx file when asked to run from 0x0, this lets
2393 sdcdb run programs from ram.
2395 The reset command clears all hw breakpoints, so reset them afterwards.
2397 Signed-off-by: Keith Packard <keithp@keithp.com>
2399 commit 1264c3676e95427bba5d01e05c303d036a7f9eca
2400 Author: Keith Packard <keithp@keithp.com>
2401 Date: Fri Dec 26 23:05:04 2008 -0800
2403 Switch to libusb-1.0 and use async interface.
2405 The async libusb interface offers substantial performance benefits by not
2406 making each command wait for the reply. This makes talking over this
2407 interface almost reasonable.
2409 Signed-off-by: Keith Packard <keithp@keithp.com>
2411 commit d2d9cfd74fd66836c913c02276e09136d83b35dc
2412 Author: Keith Packard <keithp@keithp.com>
2413 Date: Fri Dec 26 17:58:48 2008 -0800
2415 s51: add breakpoints and the ability to block awaiting a breakpoint.
2417 Signed-off-by: Keith Packard <keithp@keithp.com>
2419 commit 4c4093c3fdd309123fdd068c0e1ff4947104492d
2420 Author: Keith Packard <keithp@keithp.com>
2421 Date: Mon Dec 22 19:11:56 2008 -0800
2423 Add more commands to s51 assembly-language debugger
2425 Signed-off-by: Keith Packard <keithp@keithp.com>
2427 commit 55eba4fa08b022197106245d36a70f575a070b0a
2428 Author: Keith Packard <keithp@keithp.com>
2429 Date: Mon Dec 22 19:10:27 2008 -0800
2431 Make read_memory debug output use ccdbg_debug.
2433 This makes it default to not being presented, which makes s51 much happier
2435 Signed-off-by: Keith Packard <keithp@keithp.com>
2437 commit e75918f3667a5c8ad294bec4acef6fe81682edf6
2438 Author: Keith Packard <keithp@keithp.com>
2439 Date: Sun Dec 21 23:33:35 2008 -0800
2441 Add preliminary version of s51, a UI clone of the 8051 emulator.
2443 sdcdb provides source-level debugging using the 8051 emulator, s51. By
2444 emulating that emulator a the UI level, we should be able to get source
2445 debugging right on our target platform.
2447 This is just the preliminary structure for the program with most commands
2448 not yet implemented.
2450 commit f7d49868aeae80d515b12a7e339628f1296754a6
2451 Author: Keith Packard <keithp@keithp.com>
2452 Date: Sat Dec 20 23:30:06 2008 -0800
2454 Cleanup work; separating out the cp interface to be more abstract.
2456 Signed-off-by: Keith Packard <keithp@keithp.com>
2458 commit 30f23f23a6db3d12fdc9c088cf6ab47c5e5077fb
2459 Author: Keith Packard <keithp@keithp.com>
2460 Date: Fri Dec 19 21:13:04 2008 -0800
2462 Clean up autotools stuff.
2464 Signed-off-by: Keith Packard <keithp@keithp.com>
2466 commit 9025eb792861930e6af918d2727c4f5d97a69936
2467 Author: Keith Packard <keithp@keithp.com>
2468 Date: Fri Dec 19 21:11:45 2008 -0800
2472 Signed-off-by: Keith Packard <keithp@keithp.com>
2474 commit ab909db28307cfbf7ee8d692506bb79d7ffd627a
2475 Author: Keith Packard <keithp@keithp.com>
2476 Date: Fri Dec 19 19:08:13 2008 -0800
2480 commit cc8db276bc4f2fd7eb00168a5c0689a8457a5c6f
2481 Author: Keith Packard <keithp@keithp.com>
2482 Date: Fri Dec 19 19:07:37 2008 -0800
2484 Move blink example to subdir
2486 Signed-off-by: Keith Packard <keithp@keithp.com>
2488 commit 82e2d7ebed6682062dc400478c736bd6c91195c9
2489 Author: Keith Packard <keithp@keithp.com>
2490 Date: Fri Dec 19 19:04:26 2008 -0800
2492 Clean up makefiles, move ihx files to .ihx
2494 commit 52fb5f795adfd7f62e5b6dbe65877d14361cfdae
2495 Author: Keith Packard <keithp@keithp.com>
2496 Date: Fri Dec 19 14:39:57 2008 -0800
2500 commit 4ecfc33f16aa36b315519e6f279da65374b67aba
2501 Author: Keith Packard <keithp@keithp.com>
2502 Date: Fri Dec 19 14:37:53 2008 -0800
2504 Add cc1111 isr stub example
2506 commit d32e6658c3e489b62ba3cf6d22e3ab177b9b8a3a
2507 Author: Keith Packard <keithp@keithp.com>
2508 Date: Fri Dec 19 14:37:29 2008 -0800
2510 Add blink-tiny flash and ram versions
2512 commit b4d1127ef007843c643b778b3b2f6b915b1d5d9a
2513 Author: Keith Packard <keithp@keithp.com>
2514 Date: Fri Dec 19 14:19:29 2008 -0800
2516 Flash multiple pages. Eliminate off-by-one error in hex_image length.
2518 Signed-off-by: Keith Packard <keithp@keithp.com>
2520 commit 55995515b9d4fc1e193039eab697c5d03db417c2
2521 Author: Keith Packard <keithp@keithp.com>
2522 Date: Fri Dec 19 11:04:16 2008 -0800
2524 Add flash writing code.
2526 Signed-off-by: Keith Packard <keithp@keithp.com>
2528 commit 0bc52385b8f86f9ca1c450ad106e6d8afe3bc153
2529 Author: Keith Packard <keithp@keithp.com>
2530 Date: Thu Dec 18 12:37:32 2008 -0800
2534 Signed-off-by: Keith Packard <keithp@keithp.com>
2536 commit 3779cc8b32cac3640f42bd0400d4199ddae965a1
2537 Author: Keith Packard <keithp@keithp.com>
2538 Date: Thu Dec 18 12:17:41 2008 -0800
2542 Signed-off-by: Keith Packard <keithp@keithp.com>
2544 commit dc03adc179669d41e3551d74b3c5a60db41ff217
2545 Author: Keith Packard <keithp@keithp.com>
2546 Date: Thu Dec 18 12:07:06 2008 -0800
2548 Add ability to load Intel HEX files. Add sample sdcc LED blinker.
2550 Signed-off-by: Keith Packard <keithp@keithp.com>
2552 commit 807e2adacb025af77bb53c03209e9c8e0d7a5f95
2553 Author: Keith Packard <keithp@keithp.com>
2554 Date: Thu Dec 18 00:18:50 2008 -0800
2556 Add ability to read/write arbitrary memory. Write LED blinker program.
2558 Signed-off-by: Keith Packard <keithp@keithp.com>
2560 commit 8c879bf51c14a5928135d59211facd72f6a32808
2561 Author: Keith Packard <keithp@keithp.com>
2562 Date: Wed Dec 17 23:15:47 2008 -0800
2564 Move manual bit-banging debug code to separate file
2566 Signed-off-by: Keith Packard <keithp@keithp.com>
2568 commit aec3bbce84a5ceb92060a4b3889379f2af2404ac
2569 Author: Keith Packard <keithp@keithp.com>
2570 Date: Wed Dec 17 23:15:19 2008 -0800
2572 reduce clock to 50us
2574 Signed-off-by: Keith Packard <keithp@keithp.com>
2576 commit fa168f963f8b00144d12aa2770e9c0917cfae123
2577 Author: Keith Packard <keithp@keithp.com>
2578 Date: Wed Dec 17 23:12:59 2008 -0800
2580 Fill out ccdbg-command to support all debug commands.
2582 Signed-off-by: Keith Packard <keithp@keithp.com>
2584 commit 5df84df7cd6a31527dcfd11030f00ef9d8abf170
2585 Author: Keith Packard <keithp@keithp.com>
2586 Date: Wed Dec 17 22:24:59 2008 -0800
2588 Clean up bitbanging layer. Add debug printfs.
2590 Signed-off-by: Keith Packard <keithp@keithp.com>
2592 commit 584e28bac8af38de433767e017977ed1adddeb36
2593 Author: Keith Packard <keithp@keithp.com>
2594 Date: Wed Dec 17 12:32:15 2008 -0800
2596 Clean up sample debug files
2598 Signed-off-by: Keith Packard <keithp@keithp.com>
2600 commit e64b4dbf15e9ee1cb0de002985de7575e83d46e9
2601 Author: Keith Packard <keithp@keithp.com>
2602 Date: Mon Dec 8 17:25:28 2008 -0800
2604 Add support for input-only lines (-)
2606 commit 4f38974a9941cddaba27c17c5a46f923db386c94
2607 Author: Keith Packard <keithp@keithp.com>
2608 Date: Sat Dec 6 16:32:27 2008 -0800
2612 commit 3709ec3205cfb152b6568f3ea505c67fe7504c2a
2613 Author: Keith Packard <keithp@keithp.com>
2614 Date: Sat Dec 6 16:32:12 2008 -0800
2616 Add libusb support and lots more examples
2618 commit 39801e6e9fb9388072ee414a447f74095a6ac960
2619 Author: Keith Packard <keithp@keithp.com>
2620 Date: Fri Nov 28 22:57:07 2008 -0800
2624 commit 01cb2799875e086ee6096627c058ee235bbc33d5
2625 Author: Keith Packard <keithp@keithp.com>
2626 Date: Thu Nov 27 17:07:15 2008 -0800
2628 Add prototypes, add stub mainline, add .gitignore
2630 commit 0ffe4ef870b0e564789a1990aeab5b6651868e5b
2631 Author: Keith Packard <keithp@keithp.com>
2632 Date: Thu Nov 27 12:33:40 2008 -0800
2634 cc1111 debug port access through cp2103 serial chip