1 commit c0ad087008856cfc2233b977abfc3f1dcbaccdcc
3 Author: Bdale Garbee <bdale@gag.com>
4 Date: Mon Sep 5 20:59:11 2016 -0600
6 Merge branch 'master' into branch-1.6
8 commit 4fdf8ca9ca1cd5a84b03bd7a03c5806af64b413d
9 Author: Keith Packard <keithp@keithp.com>
10 Date: Mon Sep 5 20:55:17 2016 -0600
12 Remove pyro wizard file from master
16 Signed-off-by: Keith Packard <keithp@keithp.com>
18 commit 89b8b2ee98e8d329559f54058c574ba9122ced8e
19 Author: Keith Packard <keithp@keithp.com>
20 Date: Mon Sep 5 20:46:05 2016 -0600
24 Signed-off-by: Keith Packard <keithp@keithp.com>
26 commit a37b687670dd1ccb0274e5fe6bf6145c4fc5acc8
27 Author: Keith Packard <keithp@keithp.com>
28 Date: Mon Sep 5 20:45:12 2016 -0600
30 altosui: Don't ship TeleMetrum v3.0 firmware (yet)
32 We haven't finished this yet, so don't deliver firmware for it.
34 Signed-off-by: Keith Packard <keithp@keithp.com>
36 commit 45084fd04326b979f349870f09ff9af1b3155cbe
37 Author: Keith Packard <keithp@keithp.com>
38 Date: Sat Sep 3 21:02:35 2016 -0500
40 Add 1.6.8 release notes
42 Signed-off-by: Keith Packard <keithp@keithp.com>
44 commit 9279b0cd52333a846b57af890f708ebb364b62b7
45 Author: Keith Packard <keithp@keithp.com>
46 Date: Sat Sep 3 01:21:34 2016 -0500
48 altos/stm: Set SPI slave DMA priority to HIGH/VERY_HIGH
50 Set spi slave DMA priority MOSI to HIGH and MISO to VERY_HIGH. Slave
51 SPI doesn't have the luxury of slowing down when the system is busy,
52 so provide it maximum memory bandwidth to try and keep up with the
55 Signed-off-by: Keith Packard <keithp@keithp.com>
57 commit d80995c4535a3655ca1b9ca674d6839cfef84c4e
58 Author: Keith Packard <keithp@keithp.com>
59 Date: Sat Sep 3 01:20:20 2016 -0500
61 altos/stm: Set i2c recv DMA to HIGH
63 Make sure receive DMA is higher than any TX dma so that
64 it always runs in preference.
66 Signed-off-by: Keith Packard <keithp@keithp.com>
68 commit af2eefbed43e56885a7321319d69b7be17354cdd
69 Author: Keith Packard <keithp@keithp.com>
70 Date: Sat Sep 3 00:55:19 2016 -0500
72 altos/stm: Set MISO DMA priority to HIGH to avoid OVR
74 When the MISO DMA priority is too low, and the processor gets busy,
75 it's possible for SPI input to overrun the processor, which causes the
76 MISO DMA to get out of sync and never finish. Set the MISO DMA
77 priority to HIGH to avoid this.
79 Signed-off-by: Keith Packard <keithp@keithp.com>
81 commit 4fc5cfa2c63c43ab0a9ef7e0cc6832fb1c163bd6
82 Author: Keith Packard <keithp@keithp.com>
83 Date: Sat Sep 3 00:53:44 2016 -0500
85 altos/stm: Create funcs to set SPI DMA parameters
87 Instead of having nearly duplicate versions of the SPI DMA
88 configuration calls, create helper funcs that do most of the work so
89 that the SPI API funcs are shorter and clearer.
91 Signed-off-by: Keith Packard <keithp@keithp.com>
93 commit 1710a4921d4f408300c7d5adf0e83d08cc86be20
94 Author: Keith Packard <keithp@keithp.com>
95 Date: Sat Sep 3 00:52:12 2016 -0500
97 altos/stm: Make ao_spi_duplex out pointer const
99 Provides a bit better typechecking opportunities for this function.
101 Signed-off-by: Keith Packard <keithp@keithp.com>
103 commit 5d913dde1fa58cbcb5edbc88405180e37ba0dbcd
104 Author: Keith Packard <keithp@keithp.com>
105 Date: Fri Sep 2 23:40:03 2016 -0500
107 Bump version to 1.6.7.1
109 Signed-off-by: Keith Packard <keithp@keithp.com>
111 commit 30e8f003381c30434058905f53f5a219ac5feb4f
112 Author: Keith Packard <keithp@keithp.com>
113 Date: Fri Sep 2 23:36:36 2016 -0500
115 ao-tools/ao-cal-freq: Re-open usb device each try
117 Instead of trying to re-use the same file descriptor, close and
118 re-open the device each time around the loop to avoid getting stuck
119 when calibrating TeleMega boards.
121 Signed-off-by: Keith Packard <keithp@keithp.com>
123 commit 3ea30c1909b3ae23918ea6d0a53d2c4065b08763
124 Author: Keith Packard <keithp@keithp.com>
125 Date: Fri Sep 2 23:34:47 2016 -0500
127 ao-tools/ao-usbload: Fix -f flag, remove debug hacks
129 The code to validate the usb id and product name had some debug hacks
130 left enabled, which caused it to fail. The short -f version of the
131 force flag was also not getting parsed correctly.
133 Signed-off-by: Keith Packard <keithp@keithp.com>
135 commit dfaabc1ca3aaad0d249283308b06d3e0567f0c59
136 Author: Keith Packard <keithp@keithp.com>
137 Date: Fri Sep 2 23:33:27 2016 -0500
139 ao-bringup/turnon_telemetrum: serial on cmd line. Loop on accel fail
141 These make the script easier to use
143 Signed-off-by: Keith Packard <keithp@keithp.com>
145 commit 8bbef0c7039f4a0c6ac368fd994c2e52d84d293c
146 Author: Keith Packard <keithp@keithp.com>
147 Date: Fri Sep 2 16:13:25 2016 -0500
149 altosui: Deal with connect failure in AltosConfigTD
151 When the USB connection times out, abort any pending operations and
152 clean up the thread correctly. Also, deal with the serial line being
153 closed by checking for null.
155 Signed-off-by: Keith Packard <keithp@keithp.com>
157 commit b2d013aef5b76ff527e8174dff7f6ffe0dfaefae
158 Author: Keith Packard <keithp@keithp.com>
159 Date: Wed Aug 31 21:27:10 2016 -0600
161 ao-tools/ao-cal-freq: --verbose option has no parameter
163 Signed-off-by: Keith Packard <keithp@keithp.com>
165 commit 08923aa0cf31ae7bd73b66b4d1cd81fae4241ff0
166 Author: Keith Packard <keithp@keithp.com>
167 Date: Wed Aug 31 21:25:59 2016 -0600
169 ao-bringup: telemega allow serial on command line, loop on accel fail
171 Allow the serial number on the turnon_telemega command line, instead
174 When accel cal fails, loop waiting for it to succeed instead of
177 Signed-off-by: Keith Packard <keithp@keithp.com>
179 commit ab75ab10564c4d5d05719c382a3b71585cd70710
180 Author: Keith Packard <keithp@keithp.com>
181 Date: Mon Aug 29 09:27:53 2016 -0700
183 altos/cc1120: remove unused status from ao_radio_fifo_write_stop
185 Signed-off-by: Keith Packard <keithp@keithp.com>
187 commit 462039c769f2db9328b04759807c30691f2b96c2
188 Author: Keith Packard <keithp@keithp.com>
189 Date: Sun Aug 14 15:57:39 2016 -0700
191 ao-usbload: Check target device name to avoid mis-flashing
193 Instead of blindly loading firmware, go get the old device's name and
194 make sure it matches the new firmware.
196 Add --force option to allow this to be overridden.
198 Signed-off-by: Keith Packard <keithp@keithp.com>
200 commit c62816a00b9aa40879a2ea98da2d10667e09b704
201 Author: Keith Packard <keithp@keithp.com>
202 Date: Sun Aug 14 15:55:13 2016 -0700
204 ao-chaosread: Parse -i and -b options
206 Need to pass the single-byte verisons to getopt_long
208 Signed-off-by: Keith Packard <keithp@keithp.com>
210 commit af1d41e32fc04d5897fd2dc736391d263af48727
211 Author: Keith Packard <keithp@keithp.com>
212 Date: Mon Aug 8 22:40:41 2016 -0700
214 Bump verison to 1.6.7
216 Signed-off-by: Keith Packard <keithp@keithp.com>
218 commit 46b1234140c04dbfac22be0fdf80be96506b6948
219 Author: Keith Packard <keithp@keithp.com>
220 Date: Mon Aug 8 22:39:16 2016 -0700
222 altos/stmf0: Switch ADC fast to ADC clock
224 Using this slower clock eliminates sampling problems with the ADC and
225 cleans up the chaoskey raw data.
227 Signed-off-by: Keith Packard <keithp@keithp.com>
229 commit 48088d1d6a66c5d5271b52191367f07b09626b29
230 Author: Keith Packard <keithp@keithp.com>
231 Date: Thu Aug 4 09:54:16 2016 -0700
233 altos: Flash all LEDS during power on
235 This tests the LEDS to make sure they all work on the following devices:
244 Signed-off-by: Keith Packard <keithp@keithp.com>
246 commit 71e3a59e42c284fde8ac2767abd029230ed86e07
247 Author: Keith Packard <keithp@keithp.com>
248 Date: Thu Aug 4 09:52:05 2016 -0700
250 ao-bringup: Add colors to chaoskey test result reporting
252 This makes them show up nice and bright in the terminal window.
254 Signed-off-by: Keith Packard <keithp@keithp.com>
256 commit bc920c80ef447a5bcdf8165b69fb28b8f63609df
257 Author: Keith Packard <keithp@keithp.com>
258 Date: Tue Aug 2 16:35:36 2016 -0700
260 Bump to version 1.6.6
262 Signed-off-by: Keith Packard <keithp@keithp.com>
264 commit 165868999f45f4572ff2585fcb3986974a5bbd5c
265 Author: Keith Packard <keithp@keithp.com>
266 Date: Tue Aug 2 16:52:39 2016 -0700
268 ao-bringup: Use released files for chaoskey turnon
270 Signed-off-by: Keith Packard <keithp@keithp.com>
272 commit c4926a69d6e72a035197b3d617c62893a7ea1861
273 Author: Keith Packard <keithp@keithp.com>
274 Date: Tue Aug 2 16:30:15 2016 -0700
276 ao-bringup: Test chaoskey using dieharder
278 This uses a subset of the dieharder tests which run in reasonable time
279 and don't appear to emit false negatives on a regular basis.
281 Signed-off-by: Keith Packard <keithp@keithp.com>
283 commit d52cb9dac725206ba7b2d26818c84f134d5bf183
284 Author: Keith Packard <keithp@keithp.com>
285 Date: Tue Aug 2 16:53:17 2016 -0700
287 ao-chaosread: Eliminate double-free when serial match fails
289 Signed-off-by: Keith Packard <keithp@keithp.com>
291 commit 3bdc9028502c766d1c8ddb4f0dedba4bbc22384e
292 Author: Keith Packard <keithp@keithp.com>
293 Date: Tue Aug 2 16:28:17 2016 -0700
295 ao-chaosread: Add --infinite and --bytes options
297 The --infinite option keeps writing data.
298 The --bytes options pulls out bits 1-8 which should provide 8 true
301 This combination allows ao-chaosread to be fed directly into dieharder
302 to validate the hardware.
304 Signed-off-by: Keith Packard <keithp@keithp.com>
306 commit 826ad792389150ea8d80e341cb8ea023db83c9a2
307 Author: Keith Packard <keithp@keithp.com>
308 Date: Tue Aug 2 16:26:49 2016 -0700
310 altos: Use standard FIPS testing for chaoskey
312 Check to make sure we aren't repeating a block coming from the
313 unwhitened source, which is the standard online FIPS test for RNGs.
315 Signed-off-by: Keith Packard <keithp@keithp.com>
317 commit 1934468e96ea9d179abf6e3e728b6b14ce793f46
318 Author: Keith Packard <keithp@keithp.com>
319 Date: Tue Aug 2 16:53:50 2016 -0700
321 altos/stmf0: Clean .bin files from flash-loader dirs
323 The .bin files are what the DFU utility uses to flash the boot loader
326 Signed-off-by: Keith Packard <keithp@keithp.com>
328 commit 782013d0ff2c9f076952c0e172bfcb7016699d5f
329 Author: Keith Packard <keithp@keithp.com>
330 Date: Tue Aug 2 16:32:43 2016 -0700
332 altos/stmf0: Hook up clock output support
334 This was used to try and not have two xtals on telemini, but failed
335 because the provided clock has too much noise.
337 Signed-off-by: Keith Packard <keithp@keithp.com>
339 commit 99753673a4a97423300427e276bf550ae5353842
340 Author: Keith Packard <keithp@keithp.com>
341 Date: Tue Aug 2 16:31:41 2016 -0700
343 altos: Make telelcotwo control two boxes instead of two pads
345 telefiretwo is now a single pad box, so telelcotwo needs to switch
346 between boxes instead of pads on the same box. Do this by re-purposing
347 the pad arming switches into a box selector and arming switch.
349 Signed-off-by: Keith Packard <keithp@keithp.com>
351 commit be84201495fa3cabd699012e57e797355e2bd792
352 Author: Keith Packard <keithp@keithp.com>
353 Date: Wed Jul 27 21:28:34 2016 -0700
355 altos: Add 'ao_button_get' to button driver
357 This returns the current state of the button; useful to check what the
360 Signed-off-by: Keith Packard <keithp@keithp.com>
362 commit a6701283af7ed2b3016a910d6edbe4a5e8304581
363 Author: Keith Packard <keithp@keithp.com>
364 Date: Tue Aug 2 16:33:52 2016 -0700
366 altoslib: Add a 'seconds' method to AltosGPS
368 This computes the time in seconds since the epoch from GPS time
371 Signed-off-by: Keith Packard <keithp@keithp.com>
373 commit 647690dbe084d188ba3973da631871a65f2dc50d
374 Author: Keith Packard <keithp@keithp.com>
375 Date: Wed Jul 27 13:29:20 2016 -0700
377 altos: Stop building cc1111-based telemini v2.0 firmware
379 This product never worked, so stop insisting that it actually build.
381 Signed-off-by: Keith Packard <keithp@keithp.com>
383 commit fe13426daff08f2beface2c1906f9a6184f6b987
384 Author: Keith Packard <keithp@keithp.com>
385 Date: Wed Jul 27 13:26:22 2016 -0700
387 altos: Don't switch to flight 0 when log fills in flight
389 If the log is full at startup, we want to transmit flight 0 to let the
390 ground station know. However, we don't want to switch to flight 0 in
391 flight, so save the initial telemetry flight number (0 or the real
392 flight number) at startup and use that throughout the flight.
394 Signed-off-by: Keith Packard <keithp@keithp.com>
396 commit 71ddb973ff75680e78fbbef7978ab3893c367629
397 Author: Keith Packard <keithp@keithp.com>
398 Date: Wed Jul 27 13:24:57 2016 -0700
400 altos: Expose cc1200 radio test functions for telemini bringup
402 This exposes the cc1200 radio test function so we can load special
403 test firmware in telemini to do the radio cal as it has no USB to
404 perform that interactively.
406 Signed-off-by: Keith Packard <keithp@keithp.com>
408 commit 59874a062543c61d164089e8b31f55a9b860c0b1
409 Author: Keith Packard <keithp@keithp.com>
410 Date: Wed Jul 27 13:23:06 2016 -0700
414 commit 2507b9f29d25f77de249103805087a704069c625
415 Author: Keith Packard <keithp@keithp.com>
416 Date: Wed Jul 27 13:17:51 2016 -0700
418 altos: Don't access cc1120 SPI bus during recv after abort has started
420 When the receive timeout happens, the radio may still interrupt while
421 the SPI bus is getting shut down. If this happens, the interrupt
422 handler shouldn't touch the SPI bus at all as it may well be turned
423 off, which would cause the receive function to wedge waiting for a spi
424 byte transfer to happen.
426 Signed-off-by: Keith Packard <keithp@keithp.com>
428 commit 17adfd7939ff697afa96f7207a3fe17b6af789bd
429 Author: Keith Packard <keithp@keithp.com>
430 Date: Wed Jul 27 12:24:27 2016 -0700
432 altos: Keep telemetry and command output from interleaving
434 When monitoring telemetry, the frame needs to be sent together on one
435 line, not split with the output of a command (like 'a') mixed in.
437 Use a mutex for products with monitoring to keep command output and
438 telemetry output each on separate lines.
440 Signed-off-by: Keith Packard <keithp@keithp.com>
442 commit 1667cb8e8b702b05fc3ec39ee49029885df64a4a
443 Author: Keith Packard <keithp@keithp.com>
444 Date: Sat Jul 2 20:00:01 2016 +0200
446 altos: Add STM32F0 beep and SPI byte API.
448 Signed-off-by: Keith Packard <keithp@keithp.com>
450 commit f39bee8875a0595b3d7ec7f5575d1e5eeb7544ec
451 Author: Keith Packard <keithp@keithp.com>
452 Date: Tue Jul 12 21:06:23 2016 -0700
454 altosuilib: Show indicator when they switch from invalid back to valid
456 The 'hide' value wasn't getting reset to 'false' each time the state
457 of the indicators was checked, so indicators would get hidden and then
460 Signed-off-by: Keith Packard <keithp@keithp.com>
462 commit efd91febfa9bebd2f03508b2240916551450f831
463 Author: Keith Packard <keithp@keithp.com>
464 Date: Tue Jul 12 21:06:05 2016 -0700
466 Bump version to 1.6.5.1 after 1.6.5 release
468 Signed-off-by: Keith Packard <keithp@keithp.com>
470 commit 639d8b3c4353ee25a0536e01653f3a86feb90ad5
471 Author: Keith Packard <keithp@keithp.com>
472 Date: Tue Jul 12 15:53:47 2016 -0700
474 altos: Add telemetrum v3.0
476 Like Telemetrum v2.0, but with cc1200 instead of cc1120
478 Signed-off-by: Keith Packard <keithp@keithp.com>
480 commit 1085ec5d57e0ed5d132f2bbdac1a0b6a32c0ab4a
481 Author: Keith Packard <keithp@keithp.com>
482 Date: Tue Jul 5 18:03:49 2016 +0200
484 Switch from GPLv2 to GPLv2+
486 Signed-off-by: Keith Packard <keithp@keithp.com>
488 commit 148b013dd29c26920ddfb53449ed4d8cc5a4b5ee
489 Merge: ea1ff22 cd97128
490 Author: Bdale Garbee <bdale@gag.com>
491 Date: Tue Jul 5 10:23:18 2016 +0200
493 Merge branch 'master' into branch-1.6
495 commit cd97128e30c47edfcc71f7d872cbdad14867934c
496 Author: Bdale Garbee <bdale@gag.com>
497 Date: Tue Jul 5 10:21:29 2016 +0200
499 remove debian/ from master branch, it should live only on the debian branch
501 commit a439ee4ac0398f70209292d015c5b82cd58d1d9f
502 Author: Bdale Garbee <bdale@gag.com>
503 Date: Tue Jul 5 00:48:07 2016 +0200
505 updates made during 1.6.5 release process
507 commit ea1ff225f1f450ee3fc377807d1bb7b982bf792d
508 Author: Bdale Garbee <bdale@gag.com>
509 Date: Mon Jul 4 23:47:56 2016 +0200
511 updating ChangeLog for 1.6.5 release
513 commit 2e26d1ab42163988dc26b06b016c3b05efe17659
514 Merge: 639e461 65ed2f5
515 Author: Bdale Garbee <bdale@gag.com>
516 Date: Mon Jul 4 23:47:24 2016 +0200
518 Merge branch 'master' into branch-1.6
520 commit 65ed2f588ca596fe9aa559bebd590a2a11b9859b
521 Author: Keith Packard <keithp@keithp.com>
522 Date: Sun Jul 3 12:00:10 2016 +0200
524 doc: Build 1.6.5 release notes
526 Signed-off-by: Keith Packard <keithp@keithp.com>
528 commit d60133c65b4592f0f8c832135664a8e0c922b4f0
529 Author: Keith Packard <keithp@keithp.com>
530 Date: Sat Jul 2 22:52:38 2016 +0200
532 Credit Chuck Haskin for helping fix the SPI bug.
534 Signed-off-by: Keith Packard <keithp@keithp.com>
536 commit 14e73d89d7dbb44e9ffab2820aefb693b6e8ef24
537 Author: Keith Packard <keithp@keithp.com>
538 Date: Sat Jul 2 22:08:58 2016 +0200
540 Bump to 1.6.5. Add preliminary release notes
542 Signed-off-by: Keith Packard <keithp@keithp.com>
544 commit 8a6a95bb24517af00717fd377bad82ddb2289cf0
545 Author: Keith Packard <keithp@keithp.com>
546 Date: Thu Jun 30 20:43:03 2016 -0700
548 altos/cc1111: Remove 'show tasks' command
550 This saves space on cc1111 parts.
552 Signed-off-by: Keith Packard <keithp@keithp.com>
554 commit d2e286f66d2b15df128ffe9b40a201242fc4a10a
555 Author: Keith Packard <keithp@keithp.com>
556 Date: Wed Jun 29 14:22:32 2016 -0700
558 Bump to testing version 1.6.4.2
560 Signed-off-by: Keith Packard <keithp@keithp.com>
562 commit a04830a636a71808ea8ef5ac5dfa59d6978d9f3b
563 Author: Keith Packard <keithp@keithp.com>
564 Date: Wed Jun 29 18:41:24 2016 -0700
566 altos: Use FIFO_THR pin for cc1120 transmit buffering
568 Instead of reading NUM_TXBYTES, set the FIFO_THR pin to indicate when
569 64 bytes are available in the buffer.
571 Signed-off-by: Keith Packard <keithp@keithp.com>
573 commit caf3fc2628c13ff38ffbaabda8aa8d146cda748e
574 Author: Keith Packard <keithp@keithp.com>
575 Date: Wed Jun 29 18:33:56 2016 -0700
577 altos: Leave USB enabled in flight with -DDEBUG=1
579 This leaves the command line available for diagnostics when debugging.
581 Signed-off-by: Keith Packard <keithp@keithp.com>
583 commit c6c250711355ae8060e956e786702be250ef4527
584 Author: Keith Packard <keithp@keithp.com>
585 Date: Wed Jun 29 12:55:30 2016 -0700
587 altos/stm: clean up ao_exti_enable
589 Was computing (1 << pin) twice for no good reason.
591 Signed-off-by: Keith Packard <keithp@keithp.com>
593 commit a35424cd48205af89ba023db979959dc75b06706
594 Author: Keith Packard <keithp@keithp.com>
595 Date: Wed Jun 29 12:54:31 2016 -0700
597 altos: Make task list output more useful
599 Add the timeout value and task id
601 Signed-off-by: Keith Packard <keithp@keithp.com>
603 commit 6c022e094f6f3c551355742a6f9c3deb6e554fe1
604 Author: Keith Packard <keithp@keithp.com>
605 Date: Wed Jun 29 16:07:22 2016 -0700
607 altos/telemini-v2.0: Remove show tasks command
609 There's not enough memory for this command, and it isn't necessary.
611 Signed-off-by: Keith Packard <keithp@keithp.com>
613 commit 349a63aeed6cdeb89bf18c7b2e2c40782c79cc00
614 Author: Keith Packard <keithp@keithp.com>
615 Date: Wed Jun 29 12:52:37 2016 -0700
617 altos: Make ao_delay(0) not wait forever
619 ao_delay() is implemented on top of ao_sleep_for, and ao_sleep_for
620 uses the timeout value of 0 to indicate an infinite timeout. Calls to
621 ao_delay for 0 ticks would unintentionally hit this case and end up
624 Signed-off-by: Keith Packard <keithp@keithp.com>
626 commit 3b3a24f5f39a1b72cc8947c33b609f454b46aff8
627 Author: Keith Packard <keithp@keithp.com>
628 Date: Wed Jun 29 12:49:16 2016 -0700
630 altos: cc1200: use FIFO threshold pin output for APRS buffering
632 Instead of polling the device for fifo space, just use the available
633 pin configuration to figure out if there is enough space for a single
634 APRS buffer. Then set the APRS buffer size to match the fifo threshold
635 setting in the chip so that we know we can write the whole APRS buffer
636 once the pin says there's space.
638 Signed-off-by: Keith Packard <keithp@keithp.com>
640 commit 658d8be170f9aea683fe62b68368736a177411a5
641 Author: Keith Packard <keithp@keithp.com>
642 Date: Tue Jun 28 17:03:34 2016 -0700
644 altos: Add debug check for irq block when editing task queues
646 List manipulation operations are not atomic, so interrupts need to be
647 blocked while changing them.
649 Signed-off-by: Keith Packard <keithp@keithp.com>
651 commit 30eb5d2fa77e036690170e7057fa9df669375ae5
652 Author: Keith Packard <keithp@keithp.com>
653 Date: Tue Jun 28 18:40:46 2016 -0700
655 altos/drivers: Use more reliable byte interface for CC1120 reception
657 This replaces direct register access with function calls to allow that
658 code to respect the hardware requirements.
660 Signed-off-by: Keith Packard <keithp@keithp.com>
662 commit 61ad8e5bf428246ac89cad7cb9a1edf2ef735fd5
663 Author: Keith Packard <keithp@keithp.com>
664 Date: Tue Jun 28 18:39:31 2016 -0700
666 altos/stm: Add better byte-level SPI api
668 This provides inline functions for sending and receiving individual
669 bytes, and setup/finish functions to wrap them in. This make the byte
670 sending respect the SPI hardware interface requirements.
672 Signed-off-by: Keith Packard <keithp@keithp.com>
674 commit 5866d191cee56949ccab4c154a14604e83163d42
675 Author: Keith Packard <keithp@keithp.com>
676 Date: Tue Jun 28 18:37:49 2016 -0700
678 altos/stm: Clean up spi_enable/disable_index functions
680 These had an extra level of switch nesting for no good reason.
682 Signed-off-by: Keith Packard <keithp@keithp.com>
684 commit 5ab4a8b911e254dc829b61cb0abc9fd0b46b84b3
685 Author: Keith Packard <keithp@keithp.com>
686 Date: Mon Jun 27 23:25:01 2016 -0700
688 altos/stm: move spi execution to common ao_spi_run
690 This regularizes SPI hardware use and ensures that the device is
691 turned off after it has been used and that the status register is back
692 to 'normal' the next time through.
694 Signed-off-by: Keith Packard <keithp@keithp.com>
696 commit 69791ef235161fef404f682fd6955e7eed8dc125
697 Author: Keith Packard <keithp@keithp.com>
698 Date: Mon Jun 27 23:26:20 2016 -0700
700 altos: Add STM SPI debugging
702 This dumps out the SPI hardware state and history of SPI operations
703 when compiled with -DDEBUG=1. Without that, this patch does nothing.
705 Signed-off-by: Keith Packard <keithp@keithp.com>
707 commit f418584d4d225827e08f56de86055eb3f074f8d1
708 Author: Keith Packard <keithp@keithp.com>
709 Date: Mon Jun 27 17:26:19 2016 -0700
711 altos: Add STM DMA debugging
713 This provides a command that shows current DMA operations when
714 compiled with -DDEBUG=1. Without that, this patch has no effect.
716 Signed-off-by: Keith Packard <keithp@keithp.com>
718 commit 2e60cd22f6789c94343e6432822cedab028dc1ba
719 Author: Keith Packard <keithp@keithp.com>
720 Date: Tue Jun 28 18:25:44 2016 -0700
722 altos/stm: Change ao_spi_send_sync definition to take const source
724 Provides for a bit better error checking.
726 Signed-off-by: Keith Packard <keithp@keithp.com>
728 commit 21a29c7452398e0cca0fb90f99fa42a2a0684668
729 Author: Keith Packard <keithp@keithp.com>
730 Date: Tue Jun 28 17:15:27 2016 -0700
732 altos/stm: Add more SPI status register bits
734 These weren't the original version of the docs that we had.
736 Signed-off-by: Keith Packard <keithp@keithp.com>
738 commit 785d2697376ebd20531d22441a60c41bd927b42a
739 Author: Keith Packard <keithp@keithp.com>
740 Date: Tue Jun 28 17:12:48 2016 -0700
742 altos/stm: use 0xff for dma mutex value for allocated mutexes
744 DMA channels which are 'allocated' can't be shared. Instead of using
745 the value '1' in the related 'mutex', use 0xff which won't match any task.
747 Signed-off-by: Keith Packard <keithp@keithp.com>
749 commit 0dec7d0885970a7d73468dd77220bae78e161b40
750 Author: Keith Packard <keithp@keithp.com>
751 Date: Tue Jun 28 17:11:38 2016 -0700
753 altos/stm: remove ao_dma_abort
755 This function isn't used anywhere.
757 Signed-off-by: Keith Packard <keithp@keithp.com>
759 commit 974aaf73cbb720f1b1183cc239001528b6c7a5b9
760 Author: Keith Packard <keithp@keithp.com>
761 Date: Tue Jun 28 17:09:00 2016 -0700
763 altos: Move comment in ao_sleep_for next to related code
765 The comment got moved to the wrong place
767 Signed-off-by: Keith Packard <keithp@keithp.com>
769 commit a7e0bb5eb661cfde31c383d605cb9cb8ca568bc7
770 Author: Keith Packard <keithp@keithp.com>
771 Date: Tue Jun 28 17:04:59 2016 -0700
773 altos: Block interrupts while waking tasks sleeping on timers.
775 Interrupts may not be blocked in the timer ISR, but they need to be
776 while walking the pending timer list and moving tasks back to the run
779 Signed-off-by: Keith Packard <keithp@keithp.com>
781 commit 40abb0d1e2f43a60ffa34b055ebb913ee3e20faf
782 Author: Keith Packard <keithp@keithp.com>
783 Date: Tue Jun 28 00:07:23 2016 -0700
785 altosui: Deliver firmware for Tmega 2.0 and TBT 3.0 for Windows too
787 1.6.4 added Tmega 2.0 and TBT 3.0 firmware to linux and mac, but
790 Signed-off-by: Keith Packard <keithp@keithp.com>
792 commit 5b7e81628437389014fdd39e323a6f0176e02ba6
793 Author: Keith Packard <keithp@keithp.com>
794 Date: Mon Jun 27 23:28:28 2016 -0700
796 Mark testing version 1.6.4.1
798 Signed-off-by: Keith Packard <keithp@keithp.com>
800 commit 6d15cf1580563aea90e9c47f5b268c9c7bb9ba26
801 Author: Keith Packard <keithp@keithp.com>
802 Date: Fri Jun 24 12:07:36 2016 -0700
804 altosdroid: Deal with multiple installed android SDKs
806 Use the latest SDK's zipalign
808 Signed-off-by: Keith Packard <keithp@keithp.com>
810 commit 3374a9069618658a33af54472d8670e3086af1e0
811 Author: Keith Packard <keithp@keithp.com>
812 Date: Fri Jun 24 12:06:32 2016 -0700
814 ao-tools/ao-chaosread: Document length (-l) option
816 Signed-off-by: Keith Packard <keithp@keithp.com>
818 commit ca59786b5022f592f6516a3ac54708789db14c94
819 Author: Keith Packard <keithp@keithp.com>
820 Date: Mon Jun 20 10:19:32 2016 -0700
822 Bump android version to 13
824 Need to update the maps API key in the package
826 Signed-off-by: Keith Packard <keithp@keithp.com>
828 commit 10fa950cb9fee0ba28adfc5ead108657655bb289
829 Author: Bdale Garbee <bdale@gag.com>
830 Date: Wed Jun 22 15:01:09 2016 -0600
832 switch libgtk-3-bin build-dep to gtk-update-icon-cache, closes: #825455
834 commit ed6eb010614b5b27757619fc629d7330fc8c4122
835 Author: Keith Packard <keithp@keithp.com>
836 Date: Fri Jun 17 10:18:20 2016 -0700
838 doc: Add install-html script
840 This script strips the XML-ish bits from html files so that ikiwiki
841 can parse them correctly
843 Signed-off-by: Keith Packard <keithp@keithp.com>
845 commit 639e461ded29a48c155afea12171cbfc191ccfd7
846 Author: Bdale Garbee <bdale@gag.com>
847 Date: Fri Jun 17 10:01:17 2016 -0600
851 commit 31cf047113ec72a78f4b500223a2c6be23bc86fd
852 Merge: 2f0c977 afe74c0
853 Author: Bdale Garbee <bdale@gag.com>
854 Date: Fri Jun 17 10:00:10 2016 -0600
856 Merge branch 'master' into branch-1.6
858 commit afe74c067a31ce420d0d4cdac2069c1d258a5114
859 Author: Keith Packard <keithp@keithp.com>
860 Date: Fri Jun 17 08:58:06 2016 -0700
862 Bump version to 1.6.4
864 Signed-off-by: Keith Packard <keithp@keithp.com>
866 commit 0c5a1bea3ffa7c4b6b1503733e33911cbfcb3e80
867 Author: Keith Packard <keithp@keithp.com>
868 Date: Fri Jun 17 08:54:19 2016 -0700
870 altoslib: Stop reflective JSON class walk at Object instead of null
872 Android has classes above Object which are all tied together which
873 cause the object walking to fail in pretty spectacular ways. As Object
874 has no interesting fields, that serves as a fine barrier to the super
875 class walk and works on both android and real java.
877 Signed-off-by: Keith Packard <keithp@keithp.com>
879 commit 383dec4449f8160c06804fba06290e7a07335934
880 Author: Keith Packard <keithp@keithp.com>
881 Date: Fri Jun 17 08:27:12 2016 -0700
883 altosui: Print filename before attempting to parse in --summary mode
885 Any problems handling the file are easier to debug if the filename is
886 visible above the error message.
888 Signed-off-by: Keith Packard <keithp@keithp.com>
890 commit e8250fcb267a34fbbd8b88c6dcc8eec419bbcc68
891 Author: Keith Packard <keithp@keithp.com>
892 Date: Fri Jun 17 08:26:31 2016 -0700
894 altoslib: Add back some JSON exception debugging printfs
896 These make it possible to figure out where the JSON code went wrong.
898 Signed-off-by: Keith Packard <keithp@keithp.com>
900 commit a46df4f69984e3ef0064c2b211438c8d8ffaab68
901 Author: Keith Packard <keithp@keithp.com>
902 Date: Fri Jun 17 08:17:57 2016 -0700
904 altoslib: Add construction for remaining primitive array types to JSON
906 AltosCompanion has an array of ints, which was missed until I tried a
907 telemetry file with companion data.
909 Signed-off-by: Keith Packard <keithp@keithp.com>
911 commit 1ed6a3fb6356415c0d57ce2ce556435c6ff06e73
912 Author: Keith Packard <keithp@keithp.com>
913 Date: Fri Jun 17 08:17:15 2016 -0700
915 altoslib: Add null constructor for AltosCompanion
917 This lets it be used by the JSON code.
919 Signed-off-by: Keith Packard <keithp@keithp.com>
921 commit 1dce20f7eee56166ac61798ca26eeb323dc8f012
922 Author: Keith Packard <keithp@keithp.com>
923 Date: Fri Jun 17 00:52:38 2016 -0700
925 altoslib: Get rid of manual JSON encoding stuff
927 Now that the reflective JSON stuff is working, we can delete all of
930 Signed-off-by: Keith Packard <keithp@keithp.com>
932 commit 7175774c4f60ed3efd54417f2035b50ea0108c7b
933 Author: Keith Packard <keithp@keithp.com>
934 Date: Fri Jun 17 00:02:05 2016 -0700
936 altoslib: Improve AltosState save/restore debugging
938 When save/restore generate different values, write out the two
939 versions to one.json and two.json for easy comparison.
941 Signed-off-by: Keith Packard <keithp@keithp.com>
943 commit 8df6afe843e184e98e5d965cee3af562dfa30a3b
944 Author: Keith Packard <keithp@keithp.com>
945 Date: Fri Jun 17 00:01:15 2016 -0700
947 altoslib: Use reflection JSON code for frequency preferences
949 This replaces the non-reflective JSON code with reflective code, which
952 Signed-off-by: Keith Packard <keithp@keithp.com>
954 commit 93de1d7ec841c55f5a1a63d34b422780a6fbe3c3
955 Author: Keith Packard <keithp@keithp.com>
956 Date: Fri Jun 17 00:00:09 2016 -0700
958 altoslib: Add JSON-based object saving/restoring code
960 This uses Java reflection to construct JSON strings for
963 Signed-off-by: Keith Packard <keithp@keithp.com>
965 commit 2a1b7c6c509d4d19de21abf02b63aeacba269d13
966 Author: Keith Packard <keithp@keithp.com>
967 Date: Thu Jun 16 23:59:06 2016 -0700
969 altoslib: Add null constructors to AltosQuaternion and AltosRotation
971 These will be used in the reflection-based JSON code
973 Signed-off-by: Keith Packard <keithp@keithp.com>
975 commit f7e2f7f430e612c682bf55478860054ce94b995f
976 Author: Keith Packard <keithp@keithp.com>
977 Date: Wed Jun 15 22:52:08 2016 -0700
979 altoslib: Remove AltosHashSet code
981 Everything has switched to JSON now.
983 Signed-off-by: Keith Packard <keithp@keithp.com>
985 commit 1b5ea911049a8afae6af475a4a2bf62a6e3aa57b
986 Author: Keith Packard <keithp@keithp.com>
987 Date: Wed Jun 15 22:40:27 2016 -0700
989 altoslib: Switch preserved state format to JSON
991 This is much easier to debug than the icky strings with backslashes everywhere.
993 Signed-off-by: Keith Packard <keithp@keithp.com>
995 commit 1de8b6c340cec0b5a327392686c5a4e00f201e98
996 Author: Keith Packard <keithp@keithp.com>
997 Date: Wed Jun 15 22:39:31 2016 -0700
999 doc: Updates to 1.6.4 release notes.
1001 Note USB fixes for host reboot and other changes.
1003 Signed-off-by: Keith Packard <keithp@keithp.com>
1005 commit f28db1102685c87b9f4278268f7e91f5df18374a
1006 Author: Keith Packard <keithp@keithp.com>
1007 Date: Wed Jun 15 22:38:32 2016 -0700
1009 altosui: Don't open command window when --graph is provided
1011 When the user explicitly asks to open a graph, don't bring up the
1012 command button window too.
1014 Signed-off-by: Keith Packard <keithp@keithp.com>
1016 commit 2a4d741872449b5332f28e018fa3acc53ed7d891
1017 Author: Keith Packard <keithp@keithp.com>
1018 Date: Wed Jun 15 22:37:39 2016 -0700
1020 altosuilib: Track open frames, exit when none remain
1022 This will let us not have the altosui window open by causing the
1023 application to shut down when the last frame closes.
1025 Signed-off-by: Keith Packard <keithp@keithp.com>
1027 commit 04c6f4c54ac10f6464ffb8cab2186ac2b2eafb00
1028 Author: Keith Packard <keithp@keithp.com>
1029 Date: Wed Jun 15 22:36:35 2016 -0700
1031 altosui: Remove missing items from --summary output
1033 Check all values for MISSING before printing them.
1035 Signed-off-by: Keith Packard <keithp@keithp.com>
1037 commit 7fd28830b6f7a20b35d85a92047ccb94c965fe29
1038 Author: Keith Packard <keithp@keithp.com>
1039 Date: Wed Jun 15 22:33:55 2016 -0700
1041 altosdroid: Auto save freq changes on 'ok'
1043 Add any pending changes in the edit entries to the frequency set when
1044 the user selects 'ok'.
1046 Signed-off-by: Keith Packard <keithp@keithp.com>
1048 commit 96eb350d3dfc83f6dfb31bbab1427f9206acde79
1049 Author: Bdale Garbee <bdale@gag.com>
1050 Date: Sun Jun 12 09:23:36 2016 -0600
1052 extend "ok" temp range to 40C, since battery charger on bench can drive temp above
1053 35C at times in Bdale and Robert's production testing
1055 commit eee7fa303fb0d80ac5d7b9c5a86af60333f61951
1056 Author: Keith Packard <keithp@keithp.com>
1057 Date: Sat Jun 11 22:17:01 2016 -0700
1059 altos/stmf0: Remove ao_usb_free
1061 This can't work without a lot more effort.
1063 Signed-off-by: Keith Packard <keithp@keithp.com>
1065 commit 1704d27248f1845c545ec61cf1bad58bf41189af
1066 Author: Keith Packard <keithp@keithp.com>
1067 Date: Sat Jun 11 22:16:12 2016 -0700
1069 altos/stmf0: Rework the sram allocation to save a few text bytes
1071 Boot loaders were going over 4096 bytes of ROM. I suspect we'll need
1072 more serious work soon.
1074 Signed-off-by: Keith Packard <keithp@keithp.com>
1076 commit 36a08dc89ece6e2a2f0f69e3b31da17d66ceb2e2
1077 Author: Keith Packard <keithp@keithp.com>
1078 Date: Fri Jun 10 14:40:26 2016 -0700
1080 altos/cc1115l: Reduce trace buffer size
1082 A 32-element trace buffer is all the larger we can fit in teledongle.
1084 Signed-off-by: Keith Packard <keithp@keithp.com>
1086 commit 7d21ff641a7bc35318f0f637589eabb5bb6c5152
1087 Author: Keith Packard <keithp@keithp.com>
1088 Date: Fri Jun 10 14:39:25 2016 -0700
1090 altos/stm: Handle USB reset in STM32L usb driver
1092 Just like lpc and stmf0, deal with the host resetting the bus while
1093 rebooting by restoring all usb-related data to the initial values.
1095 Signed-off-by: Keith Packard <keithp@keithp.com>
1097 commit 54f8d53584d0a902676b441cd122c01cd54f2283
1098 Author: Keith Packard <keithp@keithp.com>
1099 Date: Fri Jun 10 14:33:50 2016 -0700
1101 altos/lpc: Handle USB reset by resetting internal state
1103 Just like stmf0, this clears internal state at USB reset time so the
1104 driver can survive host OS reboots.
1106 Signed-off-by: Keith Packard <keithp@keithp.com>
1108 commit 36ba97fabbed2f2a4a89da5be221c630ea3ff66f
1109 Author: Keith Packard <keithp@keithp.com>
1110 Date: Thu Jun 9 22:06:30 2016 -0700
1112 stmf0: Do not send more data than requested for GET_DESCRIPTOR
1114 When Linux boots, it asks for only the first 8 bytes of the device
1115 descriptor; we must limit the amount of data sent back to that amount
1116 or USB will get wedged.
1118 Signed-off-by: Keith Packard <keithp@keithp.com>
1120 commit 2970de9f92243b11d3beef56f3b1df3ef3579b95
1121 Author: Keith Packard <keithp@keithp.com>
1122 Date: Thu Jun 9 22:05:24 2016 -0700
1124 stmf0: Clear all USB state when resetting chip. Wakeup all sleepers
1126 When USB is reset, but the board is not power cycled, all of the
1127 internal USB state needs to be reset, and any tasks blocked on sending
1128 or receiving packets need to be awoken so they can go wait for USB to
1129 start running again.
1131 Signed-off-by: Keith Packard <keithp@keithp.com>
1133 commit 55c8e5aff2cc7b941503a04970f7d368261af52a
1134 Author: Keith Packard <keithp@keithp.com>
1135 Date: Thu Jun 9 22:03:45 2016 -0700
1137 telegps-v1.0: Document how SN 1959 was fixed
1139 SN1959 was fixed by jumpering pin 8 to pin 10 so that the DONE_INT_PIN
1140 could be switched from PIO 2 to PIO 4 as pin 8 appeared to have failed.
1142 Signed-off-by: Keith Packard <keithp@keithp.com>
1144 commit 4d57c8b87f29f23beb0d88f1cef179209b1c5992
1145 Author: Keith Packard <keithp@keithp.com>
1146 Date: Sun Jun 5 09:17:12 2016 -0700
1148 altosuilib: Only display map debugging when serial_debug is enabled
1150 This keeps the application quiet for most users.
1152 Signed-off-by: Keith Packard <keithp@keithp.com>
1154 commit f982248573c1b646ac53fde980a60ada5404f6aa
1155 Author: Keith Packard <keithp@keithp.com>
1156 Date: Fri May 27 20:30:18 2016 -0700
1158 altosuilib: Fill preload map on site or lat/lon change
1160 This loads the map view with the selected area when the site entry is
1161 changed or the user hits return in the lat/lon fields. This lets you
1162 see the target launch site without having to load the whole preload set.
1164 Signed-off-by: Keith Packard <keithp@keithp.com>
1166 commit f5944ba4eb3f419f8cad461872d048b5adf7b566
1167 Author: Keith Packard <keithp@keithp.com>
1168 Date: Thu May 26 14:33:44 2016 -0700
1170 doc: pad/idle indicator table was busted
1172 I stuck a pile of extra '|' characters in the table by mistake.
1174 Reported-by: Stan <stanleyosmith@gmail.com>
1175 Signed-off-by: Keith Packard <keithp@keithp.com>
1177 commit 0d966b74f756e88e5dffa92400b105f540429262
1178 Author: Keith Packard <keithp@keithp.com>
1179 Date: Tue May 24 23:44:50 2016 -0700
1181 altosuilib: Rename AltosUIMap*New.java to AltosUIMap*.java
1183 This code isn't really new anymore...
1185 Signed-off-by: Keith Packard <keithp@keithp.com>
1187 commit 59a9bdd73b580a9c934a574be7bf45c5033e14b5
1188 Author: Keith Packard <keithp@keithp.com>
1189 Date: Tue May 24 23:40:47 2016 -0700
1191 altosuilib: Have map preload respond to units and font size changes
1193 Just add suitable listeners so that the display updates when
1196 Signed-off-by: Keith Packard <keithp@keithp.com>
1198 commit 7b5521966119fcc290591bf1b397506ef44cedea
1199 Author: Keith Packard <keithp@keithp.com>
1200 Date: Tue May 24 23:40:03 2016 -0700
1202 altoslib: use miles for distances > 1000ft.
1204 This makes both the map line and the other distance displays use miles
1205 for distances greater than 1000 feet.
1207 Signed-off-by: Keith Packard <keithp@keithp.com>
1209 commit 1ea855f95772a8a394407e0070be1ed9cc0f6650
1210 Author: Keith Packard <keithp@keithp.com>
1211 Date: Sun May 15 13:59:12 2016 -0700
1213 telegps: Add monitor idle mode
1215 This monitors directly connected devices. No support for doing monitor
1216 idle using packet mode, as TeleGPS doesn't support that.
1218 Signed-off-by: Keith Packard <keithp@keithp.com>
1220 commit df276262900551a5eecd94903eefe9a264b161ec
1221 Author: Keith Packard <keithp@keithp.com>
1222 Date: Sun May 15 13:58:41 2016 -0700
1224 telegps: Use log_space when flight_log_max is missing
1226 TeleGPS has this, but not flight_log_max
1228 Signed-off-by: Keith Packard <keithp@keithp.com>
1230 commit 9287122edc0e2dec6b2542f4cc8cb9cf2900bb33
1231 Author: Keith Packard <keithp@keithp.com>
1232 Date: Sun May 15 13:57:28 2016 -0700
1234 altoslib: Add AltosIdleReader
1236 This provides an AltosFlightReader interface for monitor idle mode,
1237 making that easier to provide in TeleGPS
1239 Signed-off-by: Keith Packard <keithp@keithp.com>
1241 commit 3c4278a29082a2af5911e22e59f8f52549f549e3
1242 Author: Keith Packard <keithp@keithp.com>
1243 Date: Sun May 15 13:56:21 2016 -0700
1245 altoslib: Add log_space to AltosState
1247 TeleGPS doesn't have flight_log_max value, but does have log_space
1248 which we can use for the same thing in monitor idle mode.
1250 Signed-off-by: Keith Packard <keithp@keithp.com>
1252 commit f484216e72f81decb2aaa7289d6f69678990b7af
1253 Author: Keith Packard <keithp@keithp.com>
1254 Date: Sun May 15 13:55:12 2016 -0700
1256 altoslib: Set version and log space from AltosIdleFetch
1258 Just more data for monitor idle mode
1260 Signed-off-by: Keith Packard <keithp@keithp.com>
1262 commit 29123a60272777916e5aae08369d0f03c2f135b6
1263 Author: Keith Packard <keithp@keithp.com>
1264 Date: Sun May 15 13:53:38 2016 -0700
1266 altoslib: Allow empty values in AltosHashSet representation
1268 Check for value termination before appending the first character.
1270 Signed-off-by: Keith Packard <keithp@keithp.com>
1272 commit b1a90adac9f6e2a609ce1ccd6749462bb5c9adbe
1273 Author: Keith Packard <keithp@keithp.com>
1274 Date: Thu May 12 23:33:53 2016 -0700
1276 altoslib: Store saved state in version-independent format
1278 Use AltosHashSet for AltosState so that AltosDroid doesn't lose
1279 tracker information when the application is upgraded.
1281 Signed-off-by: Keith Packard <keithp@keithp.com>
1283 commit b13037fad0905c5933d1ff579122ba1357b02eea
1284 Author: Keith Packard <keithp@keithp.com>
1285 Date: Thu May 12 19:13:05 2016 -0700
1287 altoslib: Store common frequencies in library version-independent form
1289 Serializable Objects in java are very specific to the class being
1290 serialized. As we bump the name of the library on a regular basis to
1291 note API/ABI issues, this mean a saved a Serializable object in
1292 the preferences database will fail to load across library version
1295 The saved tracker state and saved common frequencies were the only
1296 objects saved in this form; this patch adds infrastructure for writing
1297 objects in a version-independent form, and then adds support for
1298 saving frequencies in that form.
1300 Signed-off-by: Keith Packard <keithp@keithp.com>
1302 commit 2f4903f903223312d0a3a03dfd413059f24a07f5
1303 Author: Keith Packard <keithp@keithp.com>
1304 Date: Thu May 12 19:10:19 2016 -0700
1306 altosui/telegps/micropeak: Handle both MULTI_LIB and non-MULTI_LIB builds
1308 On x86 systems with -m32 and -m64 compilers, both libaltos32.so and
1309 libaltos64.so are built. Otherwise, we should use libaltos.so
1311 altosui only dealt with libaltos32.so and libaltos64.so, so it only
1312 worked on MULTI_LIB systems. telegps and micropeak only used
1313 libaltos.so, so they wouldn't work correctly on multi-lib systems.
1315 Fix all of them to work either way.
1317 Signed-off-by: Keith Packard <keithp@keithp.com>
1319 commit 64ed56fe3132faa8585c9cd7b0261ac85f70a7bd
1320 Author: Keith Packard <keithp@keithp.com>
1321 Date: Thu May 12 18:05:14 2016 -0700
1323 Automatically run 'git submodule update' if necessary
1325 This makes sure pdclib exists by updating for the all and
1326 all-recursive targets
1328 Signed-off-by: Keith Packard <keithp@keithp.com>
1330 commit 97adfff4cfb67c17a96f3ff46606b4e439422b01
1331 Author: Keith Packard <keithp@keithp.com>
1332 Date: Thu May 12 12:14:03 2016 -0700
1334 Bump java library versions
1336 Prepare for 1.6.4 release
1338 Signed-off-by: Keith Packard <keithp@keithp.com>
1340 commit 3450efdf8bd736a33900493eeda348ec2dacf7e8
1341 Author: Keith Packard <keithp@keithp.com>
1342 Date: Thu May 12 12:13:45 2016 -0700
1344 Bump android app version
1346 Prepare for 1.6.4 release
1348 Signed-off-by: Keith Packard <keithp@keithp.com>
1350 commit ba84b9c908d5909ea5a148c249709b21640f1eac
1351 Author: Keith Packard <keithp@keithp.com>
1352 Date: Wed May 11 23:31:53 2016 -0700
1354 telegps: Adapt to distance units switching changes
1356 'show_units' is no longer available; use 'parse_units' instead
1358 Signed-off-by: Keith Packard <keithp@keithp.com>
1360 commit 2ec7e14f0104e3a227ff566fa2fc1f6286ddd9d0
1361 Author: Keith Packard <keithp@keithp.com>
1362 Date: Wed May 11 12:48:10 2016 -0700
1364 altoslib: Get rid of AltosMap from AltosMapLoader
1366 Cleans up the loader API and eliminates a AltosMapTile for every chunk
1369 Signed-off-by: Keith Packard <keithp@keithp.com>
1371 commit ab905d2f7d8929080042cfd16cc418ea5792c3cb
1372 Author: Keith Packard <keithp@keithp.com>
1373 Date: Wed May 11 12:43:51 2016 -0700
1375 altosdroid: make disconnect stick past pause/restart
1377 Clear the active_device preference on disconnect so we don't reconnect
1378 anytime the service gets activated.
1380 Signed-off-by: Keith Packard <keithp@keithp.com>
1382 commit 0a50669b1fde3e3c1cbc08c4836613b58ead219b
1383 Author: Keith Packard <keithp@keithp.com>
1384 Date: Wed May 11 10:47:31 2016 -0700
1386 altoslib: Clean up map file and url handling
1388 move it all to AltosMapStore.java
1390 Signed-off-by: Keith Packard <keithp@keithp.com>
1392 commit 471091d0fddf09ed69df75e4f2fdd92e5f57b9c5
1393 Author: Keith Packard <keithp@keithp.com>
1394 Date: Tue May 10 23:13:14 2016 -0700
1396 doc: Start update for 1.6.4
1398 Signed-off-by: Keith Packard <keithp@keithp.com>
1400 commit b2710128a715a109745ec40553a3d4149a7f49ab
1401 Author: Keith Packard <keithp@keithp.com>
1402 Date: Tue May 10 23:04:23 2016 -0700
1404 altosuilib: Don't flicker missing voltages when changing units
1406 For some reason, a value of MISSING -1 was getting used, which caused
1407 displays to light up briefly with a weird value when switching between
1408 metric and imperial units.
1410 Signed-off-by: Keith Packard <keithp@keithp.com>
1412 commit 895cb58a6cd7424ee63c24d791b5988f41f85d31
1413 Author: Keith Packard <keithp@keithp.com>
1414 Date: Tue May 10 23:03:45 2016 -0700
1416 altosdroid: Rate limit map loading pacifier
1418 Just like in altosui.
1420 Signed-off-by: Keith Packard <keithp@keithp.com>
1422 commit c5f49d0ac254047f13c6c1ecfb5520eff72109ac
1423 Author: Keith Packard <keithp@keithp.com>
1424 Date: Tue May 10 23:02:09 2016 -0700
1426 altoslib: Allow map preloading to be aborted
1428 Close the map preload dialog and it would be nice to stop loading map
1431 Signed-off-by: Keith Packard <keithp@keithp.com>
1433 commit 2e551e7c5f82a7e35d39e8f73e8e526e5484cd5d
1434 Author: Keith Packard <keithp@keithp.com>
1435 Date: Tue May 10 22:50:23 2016 -0700
1437 altosuilib: Rate limit map loading pacifier updates
1439 Just updating the pacifier was consuming a huge amount of CPU. Update
1440 no more than once every 100ms.
1442 Signed-off-by: Keith Packard <keithp@keithp.com>
1444 commit 42021d9fdc6f7a74cc9b20ebf3cf60b4c5f4ea82
1445 Author: Keith Packard <keithp@keithp.com>
1446 Date: Tue May 10 22:49:04 2016 -0700
1448 altoslib: Remove some debug printf calls
1450 Signed-off-by: Keith Packard <keithp@keithp.com>
1452 commit 60f4d69592c440ab7bb67a04f4c07fc7279d2c20
1453 Author: Keith Packard <keithp@keithp.com>
1454 Date: Tue May 10 22:46:58 2016 -0700
1456 altoslib: Switch distance from m/ft to km/miles for large values
1458 This adds lots of infrastructure to deal with making the unit used
1459 depend on the value itself, and then uses it only for distances.
1461 Signed-off-by: Keith Packard <keithp@keithp.com>
1463 commit 6a6da23335e6e5864387c7a22946f80f51056a4f
1464 Author: Keith Packard <keithp@keithp.com>
1465 Date: Tue May 10 12:29:14 2016 -0700
1467 Add TeleMega to spec list. Add TeleGPS RF output.
1469 Signed-off-by: Keith Packard <keithp@keithp.com>
1471 commit d92ca1cd4dfbacebd7aa1bbcfc671daee35dc808
1472 Author: Keith Packard <keithp@keithp.com>
1473 Date: Tue May 10 12:28:51 2016 -0700
1475 Publish firmware with keithp-fat
1477 Signed-off-by: Keith Packard <keithp@keithp.com>
1479 commit a371253bb5fc25e34d87507dc9b814530f4e28f6
1480 Author: Keith Packard <keithp@keithp.com>
1481 Date: Mon May 9 17:57:12 2016 -0700
1483 altosdroid: Check for closed before writing/reading bluetooth
1485 Signed-off-by: Keith Packard <keithp@keithp.com>
1487 commit c57d86f6c9b56e90c986f460f93663a3e16cdf7a
1488 Author: Keith Packard <keithp@keithp.com>
1489 Date: Mon May 9 17:56:28 2016 -0700
1491 altosui/telegps: Ship firmware for new hardware
1493 TBT v3.0 and Tmega v2.0
1495 Signed-off-by: Keith Packard <keithp@keithp.com>
1497 commit f078235803a80403014b3e54039fd2d0e0704367
1498 Merge: 04759dd c457c82
1499 Author: Bdale Garbee <bdale@gag.com>
1500 Date: Mon May 9 15:52:38 2016 -0600
1502 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
1504 commit 04759dddeb29e4de9f7e6b3673dc06c633fa2369
1505 Author: Bdale Garbee <bdale@gag.com>
1506 Date: Mon May 9 15:52:21 2016 -0600
1508 process updates made during 1.6.3 release cycle
1510 commit c457c827a7445098ba5effd410de754ff5c65843
1511 Author: Keith Packard <keithp@keithp.com>
1512 Date: Mon May 9 11:48:42 2016 -0700
1514 Bump version to 1.6.3.1
1518 Signed-off-by: Keith Packard <keithp@keithp.com>
1520 commit b25785ee0afebaf516b8a1b8d08d36fbdadd74ca
1521 Author: Keith Packard <keithp@keithp.com>
1522 Date: Mon May 9 11:33:48 2016 -0700
1524 altos/cc1111: Use SW to drive UART RTS pin
1526 Can't get the hw to work.
1528 Signed-off-by: Keith Packard <keithp@keithp.com>
1530 commit 2f0c977c747824d0798550ac64eceb1d66c50efd
1531 Author: Bdale Garbee <bdale@gag.com>
1532 Date: Fri May 6 18:12:20 2016 -0600
1536 commit 15ae97fbdb4e75a74ea2e716194661d19dec46ff
1537 Merge: ac7be4a 1216c0c
1538 Author: Bdale Garbee <bdale@gag.com>
1539 Date: Fri May 6 18:11:01 2016 -0600
1541 Merge branch 'master' into branch-1.6
1543 commit 1216c0ccece4ca1492967a341c5d01e9e5068ed8
1544 Author: Keith Packard <keithp@keithp.com>
1545 Date: Fri May 6 17:10:14 2016 -0700
1547 Ignore some built files for 1.6.3
1549 Signed-off-by: Keith Packard <keithp@keithp.com>
1551 commit ac7be4a40df88ee3a0992e041635e4ac4cf5ac48
1552 Merge: b53c78e ce4c8a8
1553 Author: Bdale Garbee <bdale@gag.com>
1554 Date: Fri May 6 17:59:39 2016 -0600
1556 Merge branch 'master' into branch-1.6
1558 commit ce4c8a8ad57515e851207b0a82f3af791bb30d3e
1559 Merge: aa9630c 320e312
1560 Author: Bdale Garbee <bdale@gag.com>
1561 Date: Fri May 6 17:49:30 2016 -0600
1563 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
1565 commit aa9630c30ee09bf358e77bf47ed0815a19237fca
1566 Author: Bdale Garbee <bdale@gag.com>
1567 Date: Fri May 6 17:49:09 2016 -0600
1569 add beep to TeleMega turnon script
1571 commit 320e312db36fb6519a0bb1530d79595af18cdc86
1572 Author: Keith Packard <keithp@keithp.com>
1573 Date: Fri May 6 16:46:57 2016 -0700
1575 windows: Change install to look for browser in a different place
1577 The windows registry is a mystery.
1579 Signed-off-by: Keith Packard <keithp@keithp.com>
1581 commit e0081f7ba6fc9f1e4484d3e291fd30065ad5b620
1582 Author: Keith Packard <keithp@keithp.com>
1583 Date: Thu May 5 02:25:52 2016 -0700
1585 altoslib: Fix map preloading callbacks, run in separate thread
1587 The map storage and tile callbacks were muddled together. Create
1588 clearly separate states for map data and have status updates be
1589 delivered when registering for new status events so that registration
1590 is sufficient to track the state without an explicit call to get the
1593 Run the map tile creation in a separate thread so that even checking
1594 status of files on disk runs out of the UI thread.
1596 These fixes serve to make the pacifier update more smoothly, and also
1597 not over/under count tile loading so that the loading actually
1598 completes when all of the tiles are loaded.
1600 Signed-off-by: Keith Packard <keithp@keithp.com>
1602 commit 13179f614a99cad3016832ac1b365eaa4208c10f
1603 Author: Keith Packard <keithp@keithp.com>
1604 Date: Wed May 4 23:56:44 2016 -0700
1606 micropeak: Change order of windows install so that java detect works
1608 I have no idea why this matters, but if you run the FTDI script before
1609 trying to detect java, then the javaw.exe program isn't found and java
1612 Signed-off-by: Keith Packard <keithp@keithp.com>
1614 commit 85191fe911a5ea4af384bff9b2ed9986679cd9fd
1615 Author: Keith Packard <keithp@keithp.com>
1616 Date: Wed May 4 21:13:31 2016 -0700
1618 doc: 1.6.3 release notes note TeleBT rts/cts and TM 2.0 monitor idle fixes
1620 Signed-off-by: Keith Packard <keithp@keithp.com>
1622 commit 541996f95f9e26299618dbb79e723b82a52afd31
1623 Author: Keith Packard <keithp@keithp.com>
1624 Date: Wed May 4 21:12:46 2016 -0700
1626 doc: Update AltosDroid chapter for 1.6.3
1628 New menu structure, idle mode and frequency configuration
1630 Signed-off-by: Keith Packard <keithp@keithp.com>
1632 commit b540f6f5b034f33b8e1d1c3b91e2403a56479caa
1633 Author: Keith Packard <keithp@keithp.com>
1634 Date: Mon May 2 16:19:39 2016 -0700
1636 altos: Make sure AO_MMA655X_INVERT is declared where needed
1638 Add #define AO_MMA655X_INVERT 0 to existing products which didn't
1639 declare it at all. This will make sure the value is set correctly for
1642 Signed-off-by: Keith Packard <keithp@keithp.com>
1644 commit 0b0b359cbce6b818257b44b2a6aee0edcbaee40d
1645 Author: Keith Packard <keithp@keithp.com>
1646 Date: Mon May 2 16:13:53 2016 -0700
1648 altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted
1650 Dumping the MMA655X data with the 'A' command provides the raw sensor
1651 value. On TM v2.0 boards, the sensor is inverted, and all of the
1652 firmware uses the inverted value except for the 'dump the raw data'
1653 command. As a result, MonitorIdle was using the un-inverted value and
1654 displaying mystic values.
1656 I've fixed this in the ground station code by checking the product
1657 name and conditionally inverting the value (4095 - value) for
1658 TeleMetrum v2.0 products. Unknown products will generate a warning
1659 dialog on AltosUI so we'll catch places where we've failed to add a
1662 Signed-off-by: Keith Packard <keithp@keithp.com>
1664 commit 1a797f5fd5d25ba635fd79ad7604763253caabf2
1665 Author: Keith Packard <keithp@keithp.com>
1666 Date: Sat Apr 30 18:38:42 2016 -0700
1668 publish AltosDroid in keithp-fat target
1670 Signed-off-by: Keith Packard <keithp@keithp.com>
1672 commit 59466c1c2dbf95c427c2bb52304049eaac4d124f
1673 Author: Keith Packard <keithp@keithp.com>
1674 Date: Sat Apr 30 18:37:05 2016 -0700
1676 altoslib: Flush during set_state. Don't store listener state.
1678 The listener state wasn't used anyways, so don't bother storing
1679 it. Also, flush the state during set_state, which actually causes the
1680 state to be written out.
1682 Signed-off-by: Keith Packard <keithp@keithp.com>
1684 commit 4219fd7720caeec196bf6cb1b4cf78c8fadaf3cd
1685 Author: Keith Packard <keithp@keithp.com>
1686 Date: Sat Apr 30 18:33:25 2016 -0700
1688 altoslib: Correct stats for flights without a real landing
1690 The landing time was miscomputed when the flight ended without
1691 entering the landed state, as when the recording terminates at
1694 This led to an uncomputed average boost accel, so that is now checked
1695 separately from max accel (which is done over the whole flight, not
1698 Signed-off-by: Keith Packard <keithp@keithp.com>
1700 commit 9734f1198429dc8939eebf48b6e6acc1cef96485
1701 Author: Keith Packard <keithp@keithp.com>
1702 Date: Sat Apr 30 18:30:16 2016 -0700
1704 altosdroid: max height is a height, not a speed
1706 Was using the wrong units in the flight tab
1708 Signed-off-by: Keith Packard <keithp@keithp.com>
1710 commit 7695da327ff8861a858b6695f4849fa1399548d8
1711 Author: Keith Packard <keithp@keithp.com>
1712 Date: Sat Apr 30 08:46:52 2016 -0700
1714 Revert "altos/stm: Run scheduler code on interrupt stack"
1716 This reverts commit 6a9546413d6a236c010e806b50506d870961d074.
1718 This causes the device to stop reliably handling interrupts.
1720 commit 7db1cba64a2f6c80c5fe6e3073a0ff65be9c04c1
1721 Author: Keith Packard <keithp@keithp.com>
1722 Date: Fri Apr 29 21:49:43 2016 -0700
1724 doc: Add idle mode info to 1.6.3 release note
1726 Signed-off-by: Keith Packard <keithp@keithp.com>
1728 commit ec20e2f72460010c4f59e6d59775671260e01026
1729 Author: Keith Packard <keithp@keithp.com>
1730 Date: Thu Apr 28 12:29:16 2016 -0700
1732 altoslib: Make AltosPreferencesBackend abstract. Add set/put Serializable
1734 This lets us add functionality to this directly, such as the new
1737 Signed-off-by: Keith Packard <keithp@keithp.com>
1739 commit 3c7b68b8a513b611500dfd734182e1a2e7bdd40c
1740 Author: Keith Packard <keithp@keithp.com>
1741 Date: Wed Apr 27 01:40:47 2016 -0400
1743 altosdroid: Add configurable frequency set
1745 Signed-off-by: Keith Packard <keithp@keithp.com>
1747 commit 02f47fa98536eb0ecd58cd8f063600ced60e0a8a
1748 Author: Keith Packard <keithp@keithp.com>
1749 Date: Wed Apr 27 01:39:01 2016 -0400
1751 Fix key in AndroidManifest.xml.in
1753 Signed-off-by: Keith Packard <keithp@keithp.com>
1755 commit d81f94fd5339d513de9bde5a2e19f8eca526344f
1756 Author: Keith Packard <keithp@keithp.com>
1757 Date: Tue Apr 26 21:01:44 2016 -0400
1759 altosdroid: Split setup functions to separate dialog
1761 Remove them from the options menu, handle all preferences through
1764 Signed-off-by: Keith Packard <keithp@keithp.com>
1766 commit 204ae5142702044eb8ad2697a55028e904067958
1767 Author: Keith Packard <keithp@keithp.com>
1768 Date: Mon Apr 25 23:12:34 2016 -0400
1770 altosdroid: Add idle mode monitoring, reboot. Start igniters
1772 This adds three idle mode operations -- monitor idle, reboot flight
1773 computer and test igniters. The igniter test isn't quite wired up.
1775 Signed-off-by: Keith Packard <keithp@keithp.com>
1777 commit 565404599fe9edf9ba16aec348eeb19ea31af743
1778 Author: Keith Packard <keithp@keithp.com>
1779 Date: Mon Apr 25 18:50:58 2016 -0400
1781 altos: Clear packet queue when starting packet master
1783 This avoids overfilling the packet buffer when
1784 disconnected. Applications using packet mode shouldn't expect that
1785 output be saved across master sessions.
1787 Signed-off-by: Keith Packard <keithp@keithp.com>
1789 commit c816bea3536d025568dab313d7c8944a56ba0801
1790 Author: Keith Packard <keithp@keithp.com>
1791 Date: Mon Apr 25 18:49:45 2016 -0400
1793 altos/telebt-v3.0: Flip CTS/RTS pins for BT module
1795 These are wired backwards, so ask that the right pins be used, which
1796 requires switching to software control of the pins.
1798 Signed-off-by: Keith Packard <keithp@keithp.com>
1800 commit 27319e4edbc503f193475b437fa5fe2937d47cbe
1801 Author: Keith Packard <keithp@keithp.com>
1802 Date: Mon Apr 25 18:48:47 2016 -0400
1804 altos/stm32l: Add support for software-driven HW flow control
1806 This allows applications to request that the flow control bits be
1807 driven from software rather than hardware, permitting more flexible
1810 Signed-off-by: Keith Packard <keithp@keithp.com>
1812 commit 7c9a111ac1c88467ce28e03b4a9d3eabc9d7015b
1813 Author: Keith Packard <keithp@keithp.com>
1814 Date: Tue Jan 19 23:53:27 2016 -0800
1816 altos: Use TXE instead of TC for serial on STM32l
1818 Using TXE allows for full-speed communication, rather than waiting for
1819 each byte to be transmitted before inserting the next into the queue.
1821 Signed-off-by: Keith Packard <keithp@keithp.com>
1823 commit eee2ca7fa7fd77be8ca5806cad7e250053465048
1824 Author: Keith Packard <keithp@keithp.com>
1825 Date: Mon Apr 25 11:47:45 2016 -0400
1827 Debug bits for telebt
1829 commit a995d73838c8e7ec5126e563baa2e59d5e071b28
1830 Author: Keith Packard <keithp@keithp.com>
1831 Date: Fri Apr 22 19:15:51 2016 -0400
1833 altoslib: Don't try to drag lines around until map is loaded
1835 When the transform is null, it's hard to draw lines.
1837 Signed-off-by: Keith Packard <keithp@keithp.com>
1839 commit a5373e2f9d2f1af211aa98029d448aeb518b45ce
1840 Author: Keith Packard <keithp@keithp.com>
1841 Date: Fri Apr 22 19:15:05 2016 -0400
1843 altoslib: Report exceptions caught while opening launch sites URL
1845 This just dumps them to stdout, which helps debug on Linux at least.
1847 Signed-off-by: Keith Packard <keithp@keithp.com>
1849 commit 6bca0ed8183b85e5825eb0f4093dcd749592faf3
1850 Author: Keith Packard <keithp@keithp.com>
1851 Date: Fri Apr 22 19:00:46 2016 -0400
1853 altoslib: Use feet per second for imperial speed
1855 This is more useful during descent than miles per hour...
1857 Signed-off-by: Keith Packard <keithp@keithp.com>
1859 commit f49fd5d2be68de97ebe65fa4f6484746e91dd677
1860 Author: Keith Packard <keithp@keithp.com>
1861 Date: Fri Apr 22 18:53:32 2016 -0400
1863 altosdroid: Run even without Bluetooth
1865 This lets us view old state information on USB-only devices, or when
1866 the bluetooth device can't be enabled.
1868 Signed-off-by: Keith Packard <keithp@keithp.com>
1870 commit ea89feedd4185a5f583fa8ddf33a2ec0906e0dc0
1871 Author: Keith Packard <keithp@keithp.com>
1872 Date: Fri Apr 22 18:52:42 2016 -0400
1874 altosdroid: Redraw offline map when my location changes
1876 Update the map view even if there isn't any current telemetry data.
1878 Signed-off-by: Keith Packard <keithp@keithp.com>
1880 commit 39af826ce9032e339929eb7917b1d29c87d03f69
1881 Author: Keith Packard <keithp@keithp.com>
1882 Date: Fri Apr 22 17:32:10 2016 -0400
1884 altosdroid: Track device location in app, not telemetry service
1886 This means we get location even if there isn't a telemetry device
1887 connected, making it possible to walk to old device locations
1889 Signed-off-by: Keith Packard <keithp@keithp.com>
1891 commit b3f0c4d5c4ab8288db5fcabb0e848627031c4fd1
1892 Author: Keith Packard <keithp@keithp.com>
1893 Date: Fri Apr 22 17:31:49 2016 -0400
1895 Bump version to 1.6.3
1897 Signed-off-by: Keith Packard <keithp@keithp.com>
1899 commit 57c1320962ad08d52e89d39bd5852f8d228dd872
1900 Author: Keith Packard <keithp@keithp.com>
1901 Date: Thu Apr 21 22:37:35 2016 -0400
1903 altosdroid: Can only use message once
1905 And here I thought re-using the message was clever. That generates a
1906 nice exception and crashes the program.
1908 Signed-off-by: Keith Packard <keithp@keithp.com>
1910 commit 4d4a39b569d7982405748b961b93dcd33e59b833
1911 Author: Keith Packard <keithp@keithp.com>
1912 Date: Thu Apr 21 21:32:50 2016 -0400
1914 Add preliminary 1.6.3 release notes
1916 Signed-off-by: Keith Packard <keithp@keithp.com>
1918 commit 565d8f22c23c7c6c6817d11ef1ca02e70ba5d2ae
1919 Author: Keith Packard <keithp@keithp.com>
1920 Date: Wed Apr 20 20:27:47 2016 -0400
1922 libaltos: Fix for Mac OS X El Capitan
1924 USB enumeration for serial devices changed
1926 Signed-off-by: Keith Packard <keithp@keithp.com>
1928 commit f10fbff6758dfcfbeeeb224f8ab02fa107aae5f6
1929 Author: Justin Vreeland <vreeland.justin@gmail.com>
1930 Date: Thu Apr 21 08:30:10 2016 -0400
1932 Fix java class differing only by case
1934 OSX and Windows cannot handle files with names differing only by
1935 case. When these files are present in either there's a constant
1936 unfixable change viewable in git status and git diff.
1938 Since this code can be run and compiled on both platforms
1939 names different only by case should be avoided.
1941 Signed-off-by: Justin Vreeland <vreeland.justin@gmail.com>
1942 Signed-off-by: Keith Packard <keithp@keithp.com>
1944 commit c989237366ada094cdc817f50b7f58bbcf5b377a
1945 Author: Keith Packard <keithp@keithp.com>
1946 Date: Thu Apr 21 21:11:29 2016 -0400
1948 Prepare for new Android release by updating version number
1952 Signed-off-by: Keith Packard <keithp@keithp.com>
1954 commit 18b10ddf0e713431cb3e1065e62b0e6f597ce9d7
1955 Author: Keith Packard <keithp@keithp.com>
1956 Date: Thu Apr 21 21:12:06 2016 -0400
1958 AltosDroid play store keys have moved, update configure.ac
1960 The actual build files were already updated, but the configure.ac bits
1961 which detect that they are available were not.
1963 Signed-off-by: Keith Packard <keithp@keithp.com>
1965 commit 21d176f161b90f18f236ef887cef9676d712eee3
1966 Author: Keith Packard <keithp@keithp.com>
1967 Date: Thu Apr 21 21:12:40 2016 -0400
1969 Update java library version numbers
1971 Prepare for 1.6.3 release.
1973 Signed-off-by: Keith Packard <keithp@keithp.com>
1975 commit 4db6074bb15c66bd23c513e1e41b408e5408cff8
1976 Author: Keith Packard <keithp@keithp.com>
1977 Date: Tue Apr 19 23:19:59 2016 -0400
1979 altos: avoid mixed declarations and code in ao_task.c
1981 sdcc can't handle this.
1983 Signed-off-by: Keith Packard <keithp@keithp.com>
1985 commit 09acb6821ab490d69f679a195e70acb4a71ba342
1986 Author: Keith Packard <keithp@keithp.com>
1987 Date: Tue Apr 19 23:18:46 2016 -0400
1989 altoslib: switch from keySet() to keys() in altos map tiles
1991 Android appears to not have the keySet() API in the same way that
1992 regular java does, so use the alternate older keys() api instead.
1994 Signed-off-by: Keith Packard <keithp@keithp.com>
1996 commit 49c3e3dffe748d0d155d4876efcaf7d39e1cc8e3
1997 Author: Keith Packard <keithp@keithp.com>
1998 Date: Tue Apr 19 23:17:50 2016 -0400
2000 altoslib: Make AltosGPSSat implement Serializable
2002 This is required to save state values in AltosDroid.
2004 Signed-off-by: Keith Packard <keithp@keithp.com>
2006 commit 45bcf595d0a6a6001459f7f2055cd15e4839550b
2007 Author: Keith Packard <keithp@keithp.com>
2008 Date: Tue Apr 19 23:17:01 2016 -0400
2010 altoslib: Add debugging to AltosPreferences.state() etc
2012 This let me find why AltosDroid was losing the last state information
2015 Signed-off-by: Keith Packard <keithp@keithp.com>
2017 commit 90ba010aaa84a7d8b93c63543568a16ab0cb5984
2018 Author: Keith Packard <keithp@keithp.com>
2019 Date: Tue Apr 19 23:15:26 2016 -0400
2021 altosdroid: Don't set target location if lat/lon is MISSING
2023 Otherwise, we get a nice pointer to some random location on the planet.
2025 Signed-off-by: Keith Packard <keithp@keithp.com>
2027 commit fd0ca040a5cccae18145bd29b3e4c09f14df3865
2028 Author: Keith Packard <keithp@keithp.com>
2029 Date: Wed Apr 13 06:14:33 2016 -0700
2031 altos/telefiretwo-v0.2: Change alarm names in comment
2033 The PCB is labeled 'A' and 'B'.
2035 Signed-off-by: Keith Packard <keithp@keithp.com>
2037 commit 3abc0fc5e4484d862709501133d35563aa0c25fa
2038 Author: Keith Packard <keithp@keithp.com>
2039 Date: Wed Apr 13 06:11:44 2016 -0700
2041 altos/stmf0: Fix external interrupts
2043 Missing a reserved address in the registers broke everything nicely,
2044 but the priority values were also wrong - stm32f0 exposes 8 bits per
2045 priority, like the stm32l, but it uses only the top two bits.
2047 Signed-off-by: Keith Packard <keithp@keithp.com>
2049 commit 14fecd672807982ce6232fa3b4bdce0aebe132e8
2050 Author: Keith Packard <keithp@keithp.com>
2051 Date: Wed Apr 6 22:32:36 2016 -0700
2053 Add TeleFireTwo v0.2 project
2055 This is much like TeleFireTwo v0.1, with only one pyro channel and
2056 added siren and strobe
2058 Signed-off-by: Keith Packard <keithp@keithp.com>
2060 commit 70e46100acf597014ce54cf3b642254ce1cba59b
2061 Author: Keith Packard <keithp@keithp.com>
2062 Date: Tue Apr 5 23:45:52 2016 -0700
2064 altos/telelcotwo: Add idle timeout
2066 Puts TeleLCOTwo in a low power state (drawing about 80µA) after a
2067 timeout (default two minutes) to keep from killing the battery if the
2068 device is left turned on.
2070 Signed-off-by: Keith Packard <keithp@keithp.com>
2072 commit aef5049cf8311927fada922730f85f31c8ddf177
2073 Author: Keith Packard <keithp@keithp.com>
2074 Date: Fri Dec 25 20:46:40 2015 -0800
2076 altos: Use simpler debounce logic for buttons
2078 Instead of waiting for a while after the transition to decide if it
2079 has stuck, signal the event right away and then ignore other
2080 transitions for the debounce interval.
2082 This seems to work just as reliably, but has the benefit of
2083 eliminating button latency at press time.
2085 Signed-off-by: Keith Packard <keithp@keithp.com>
2087 commit 4c2a7503373c0584de77f9b0e5632a58ab8bbd1f
2088 Author: Keith Packard <keithp@keithp.com>
2089 Date: Fri Dec 25 11:26:34 2015 -0800
2091 altos: Add ao_lco_two.c; alternate LCO interface code
2093 The LCO interface is likely to end up very device specific as the
2094 interactions depends on the input devices. Here's a version for
2095 TeleLCOTwo, which has two arming switches and a firing button.
2097 Signed-off-by: Keith Packard <keithp@keithp.com>
2099 commit 26023cfbf7e117114a4d62b7dbfc0f907efdfb47
2100 Author: Keith Packard <keithp@keithp.com>
2101 Date: Mon Dec 21 21:52:31 2015 -0800
2103 altos: Fix telefiretwo .gitignore
2105 Was ignoring the wrong built files
2107 Signed-off-by: Keith Packard <keithp@keithp.com>
2109 commit 11f8ab90d2267715010e652d709beec363f74ed5
2110 Author: Keith Packard <keithp@keithp.com>
2111 Date: Mon Dec 21 21:50:43 2015 -0800
2113 altos: Add TeleLCOTwo firmware
2115 The LCO side of a two-channel launch controller setup.
2117 Signed-off-by: Keith Packard <keithp@keithp.com>
2119 commit e6bad553009704af69b08b4a22fb5eb8ac6921f8
2120 Author: Keith Packard <keithp@keithp.com>
2121 Date: Mon Dec 21 21:48:37 2015 -0800
2123 altos: Support pad/lco boxes with fixed box numbers
2125 This allows for a configuration without adjustable box numbers on
2126 either end of the link, simplifying the UI.
2128 Signed-off-by: Keith Packard <keithp@keithp.com>
2130 commit 93100ae8d4c8bd8fd6bdeff2cdc87b613c5d8058
2131 Author: Keith Packard <keithp@keithp.com>
2132 Date: Mon Dec 21 21:47:10 2015 -0800
2134 altos: Allow for pad boxes with different sensor configurations
2136 This allows for a pad box without a resistor from power to each
2137 FET. That resistor is needed to detect welded relays, but in a
2138 solid-state system, that's not a possibility.
2140 Signed-off-by: Keith Packard <keithp@keithp.com>
2142 commit f2038dd2cfed5bbf049144172e3f7436b6cd3a55
2143 Author: Keith Packard <keithp@keithp.com>
2144 Date: Thu Dec 17 19:54:23 2015 -0800
2146 altos: telefiretwo-v0.1 bits
2148 Get this board running.
2150 Signed-off-by: Keith Packard <keithp@keithp.com>
2152 commit 26ce7a9a213bdd35a13937054988e7b8fa749632
2153 Author: Keith Packard <keithp@keithp.com>
2154 Date: Thu Dec 17 19:30:35 2015 -0800
2156 altos: Add pad support for new telefire versions
2158 Makes the voltage divider values configurable, and allows for pyro
2159 channels that don't have the resistors necessary to check for a stuck
2162 Also supports STM32L processors with wider GPIO registers, and uses
2163 the new ao_gpio_set/clr_bits functions to fire igniters rather than
2164 cc1111-specific code.
2166 Signed-off-by: Keith Packard <keithp@keithp.com>
2168 commit 553c89f8c64398cb1a815b1fa248980cd3f62ef8
2169 Author: Keith Packard <keithp@keithp.com>
2170 Date: Thu Dec 17 19:29:36 2015 -0800
2172 altos: Support telefire products in cc1200 driver
2174 Need to disable the pad code while testing the radio.
2176 Signed-off-by: Keith Packard <keithp@keithp.com>
2178 commit b8a19e83b7b1b8e2a1fcbdd58e41f9f974ae28ff
2179 Author: Keith Packard <keithp@keithp.com>
2180 Date: Wed Apr 13 06:16:01 2016 -0700
2182 altos/detherm: Add servo driver
2184 This just provides commands to test the servo with.
2186 Signed-off-by: Keith Packard <keithp@keithp.com>
2188 commit cfb91ec7ef6ef485d813af96a0f206bb7a2204dd
2189 Author: Keith Packard <keithp@keithp.com>
2190 Date: Tue Apr 5 22:03:37 2016 -0700
2192 altos/detherm: Add ms5607 to detherm
2194 Signed-off-by: Keith Packard <keithp@keithp.com>
2196 commit 8da29480a2fdf890d553b30eab58fc884210c1a5
2197 Author: Keith Packard <keithp@keithp.com>
2198 Date: Wed Dec 23 23:15:16 2015 -0800
2200 altos: Add easy mini plotting helper in test code
2202 Signed-off-by: Keith Packard <keithp@keithp.com>
2204 commit e3f0c5eb8e5d57cbd8882587477d1381e2a83226
2205 Author: Keith Packard <keithp@keithp.com>
2206 Date: Thu Dec 17 19:27:42 2015 -0800
2208 altos: Add ao_gpi_set/clr_bits functions
2210 These set or clear a group of bits in a single GPIO register all together.
2212 Signed-off-by: Keith Packard <keithp@keithp.com>
2214 commit 097c156b13ae975c742f294b46429e8ff14c365b
2215 Author: Keith Packard <keithp@keithp.com>
2216 Date: Sat Apr 2 22:41:06 2016 -0700
2218 altos/stmf0: Add pwm and exti drivers
2220 Signed-off-by: Keith Packard <keithp@keithp.com>
2222 commit 0f227683e29062224a612c4a2ab5c8b2fc166059
2223 Author: Keith Packard <keithp@keithp.com>
2224 Date: Sat Apr 2 22:40:23 2016 -0700
2226 altos: Add detherm product
2228 Signed-off-by: Keith Packard <keithp@keithp.com>
2230 commit eeceee3520fae66b35a9a9b39c866c1c2e3b0c9a
2231 Author: Keith Packard <keithp@keithp.com>
2232 Date: Sat Apr 2 19:44:06 2016 -0700
2234 doc: Note that EasyMega and TeleMega report A-D continuity
2236 Signed-off-by: Keith Packard <keithp@keithp.com>
2238 commit f95c781bc16d332ea5442590521074396d6981ae
2239 Author: Keith Packard <keithp@keithp.com>
2240 Date: Sat Apr 2 19:43:32 2016 -0700
2242 altos/stmf0: Support HPE clock source
2244 Allows the use of crystals instead of requiring USB.
2246 Signed-off-by: Keith Packard <keithp@keithp.com>
2248 commit 9f9d77b6d025d8285e362e53a8f728ec47adb234
2249 Author: Keith Packard <keithp@keithp.com>
2250 Date: Sat Apr 2 19:42:44 2016 -0700
2252 altos/stmf0: Add SPI driver.
2254 This also changes the DMA interface a bit so we can select for
2255 interrupts on only the interesting channels.
2257 Signed-off-by: Keith Packard <keithp@keithp.com>
2259 commit f5e6caab78f4ca0e5c8a2d96ef53b8752d64f4b3
2260 Author: Keith Packard <keithp@keithp.com>
2261 Date: Sat Apr 2 19:41:21 2016 -0700
2263 altos: Use mini logging for detherm, just without ADC
2265 Signed-off-by: Keith Packard <keithp@keithp.com>
2267 commit 6ead4c570a264afdc4e45eed6e87bf541668be6f
2268 Author: Keith Packard <keithp@keithp.com>
2269 Date: Sat Apr 2 19:40:19 2016 -0700
2271 altos: Add Detherm log format (easymini without ADC)
2273 Signed-off-by: Keith Packard <keithp@keithp.com>
2275 commit 0ee235e1126f34987522fe852ba6ab3ac92d6cfd
2276 Author: Keith Packard <keithp@keithp.com>
2277 Date: Sat Apr 2 19:39:07 2016 -0700
2279 altos: Allow for flight hardware without any ADC values
2281 Detherm has no ADC connections, so we don't need to disable the ADC
2282 when going to landed state.
2284 Signed-off-by: Keith Packard <keithp@keithp.com>
2286 commit 7348cc4736c9a94f9ad299edd78199b544d0e95a
2287 Author: Keith Packard <keithp@keithp.com>
2288 Date: Thu Mar 24 19:25:33 2016 -0600
2290 altos: Add one-byte SPI output routine for LPC and STM cores
2292 This allows for SPI output at interrupt time, one byte at a time.
2294 Signed-off-by: Keith Packard <keithp@keithp.com>
2296 commit b31c6fd153825ae5ad0fcea7189472af1a9cffff
2297 Author: Keith Packard <keithp@keithp.com>
2298 Date: Thu Mar 24 19:28:16 2016 -0600
2300 altos/lpc: Add fast timer
2302 This offers a faster timer callback for higher-precision operation
2304 Signed-off-by: Keith Packard <keithp@keithp.com>
2306 commit a86d98b708d84c6e0b85cb950e3f1ee16cfc56f5
2307 Author: Keith Packard <keithp@keithp.com>
2308 Date: Sat Mar 26 15:59:26 2016 -0700
2310 altos/stm: Allow apps to define different stack size
2312 While 512 bytes is a reasonable size, sometimes apps don't have that
2315 Signed-off-by: Keith Packard <keithp@keithp.com>
2317 commit 4fa71ecf168e275b24534a5a20e3dd4e178c7bbd
2318 Author: Keith Packard <keithp@keithp.com>
2319 Date: Sat Mar 26 15:54:24 2016 -0700
2321 altos/stm: Validate current task SP in interrupt by looking at PSP
2323 We use a separate stack pointer for task code, which means we can
2324 verify that it is in range in any interrupt handler. This adds checks
2325 for the task stack (under #ifdef DEBUG) that run in ao_wakeup as well
2326 as at every timer interrupt.
2328 Signed-off-by: Keith Packard <keithp@keithp.com>
2330 commit 6a9546413d6a236c010e806b50506d870961d074
2331 Author: Keith Packard <keithp@keithp.com>
2332 Date: Sat Mar 26 15:49:59 2016 -0700
2334 altos/stm: Run scheduler code on interrupt stack
2336 This provides a bit more room for tasks on their stack
2338 Signed-off-by: Keith Packard <keithp@keithp.com>
2340 commit 55db3b3e8addaa2dc0af50470d3bc8c25cb57df3
2341 Author: Keith Packard <keithp@keithp.com>
2342 Date: Mon Mar 21 22:28:39 2016 -0600
2344 altosui,telegps: Do not allow radio calibration to be edited
2346 This leads to sorrow for almost everyone. If you want to edit this,
2347 use a terminal program.
2349 Signed-off-by: Keith Packard <keithp@keithp.com>
2351 commit c61014914c80ad0dba72224109d9b147bb343562
2352 Author: Keith Packard <keithp@keithp.com>
2353 Date: Sat Mar 26 15:57:59 2016 -0700
2355 altosuilib: Control map debugging output with Serial.debug
2357 This uses the same debug control as the serial output to monitor map downloading
2359 Signed-off-by: Keith Packard <keithp@keithp.com>
2361 commit 4f8a325949ed3cece4b646c808ad68677b16d1b6
2362 Author: Keith Packard <keithp@keithp.com>
2363 Date: Sat Mar 26 15:57:21 2016 -0700
2365 altoslib: use env var LAUNCH_SITES to override default URL
2367 This makes it easier to debug new launch site data before uploading.
2369 Signed-off-by: Keith Packard <keithp@keithp.com>
2371 commit 2fc47e7052a08de464f08d890e222afd7dec75d8
2372 Author: Keith Packard <keithp@keithp.com>
2373 Date: Sun Mar 20 23:11:49 2016 -0700
2375 libaltos: Fix warning in linux libaltos code
2377 Just returned the wrong name of the value
2379 Signed-off-by: Keith Packard <keithp@keithp.com>
2381 commit 4dddf0a9134690d94217ad12bc7372683276f8ba
2382 Author: Keith Packard <keithp@keithp.com>
2383 Date: Sun Mar 20 22:01:07 2016 -0700
2385 altosuilib: Note that Windows now supports Bluetooth
2387 Signed-off-by: Keith Packard <keithp@keithp.com>
2389 commit 054f2896b98a14051e0b818090f2de178bb77283
2390 Author: Keith Packard <keithp@keithp.com>
2391 Date: Sun Mar 20 21:54:08 2016 -0700
2393 altosui: Delay between polling for igniter status in Fire Igniters
2395 This gives a remote like time to report the full status instead of
2396 sending another request before the reply has been processed.
2398 Signed-off-by: Keith Packard <keithp@keithp.com>
2400 commit 1594691ea88ca84634eea237ac8137a5bdc19f5c
2401 Author: Keith Packard <keithp@keithp.com>
2402 Date: Sun Mar 20 21:52:53 2016 -0700
2404 libaltos: Add Windows BT support. Split into separate source files.
2406 Add Bluetooth support to Windows. Split libaltos into separate files.
2408 Signed-off-by: Keith Packard <keithp@keithp.com>
2410 commit afba05c41f30c9273668d5ed71e0dc8c1ca53141
2411 Author: Keith Packard <keithp@keithp.com>
2412 Date: Fri Mar 18 11:17:46 2016 -0700
2414 ao-bringup: Use dfu-util to install flash loader on chaoskey
2416 Signed-off-by: Keith Packard <keithp@keithp.com>
2418 commit 4635203e9be530f53b697ac0349838916e146983
2419 Author: Keith Packard <keithp@keithp.com>
2420 Date: Fri Mar 18 11:16:59 2016 -0700
2422 altos/stmf0: Construct .bin files for flash loaders
2424 This builds a .bin file which can be used with dfu-util instead of
2425 using openocd to load the initial flash loader.
2427 Signed-off-by: Keith Packard <keithp@keithp.com>
2429 commit f393482ec47e857db654fa071d4df95e98dab381
2430 Author: Keith Packard <keithp@keithp.com>
2431 Date: Fri Mar 18 11:15:57 2016 -0700
2433 ao-tools: Add ao-makebin
2435 This constructs a raw binary or DFU format file for use with dfu-util,
2436 which can be used with a bare STM processor to load code before the
2437 boot loader is available.
2439 Signed-off-by: Keith Packard <keithp@keithp.com>
2441 commit 1d7f88bf7521fa6d301da072f95f97fa42d9d247
2442 Author: Keith Packard <keithp@keithp.com>
2443 Date: Fri Mar 18 10:52:03 2016 -0700
2445 ao-tools/lib: Add ao_hex_image_cat function
2447 This takes two images and constructs a third containing the union of
2448 the contents along with 0xff bytes for any area between them.
2450 Signed-off-by: Keith Packard <keithp@keithp.com>
2452 commit 4e738dff6dec4685b8712d3e96742971fa39c8f1
2453 Author: Keith Packard <keithp@keithp.com>
2454 Date: Fri Mar 18 10:51:20 2016 -0700
2456 ao-tools/lib: Remove trailing whitespace from ao-elf.c
2458 Signed-off-by: Keith Packard <keithp@keithp.com>
2460 commit 45d61b79665197ff99f415cda7bd5907830233e9
2461 Author: Keith Packard <keithp@keithp.com>
2462 Date: Fri Mar 18 10:50:32 2016 -0700
2464 ao-tools/ao-dump-up: Remove spurious flight state strings
2466 MicroPeak doesn't have flight states like this...
2468 Signed-off-by: Keith Packard <keithp@keithp.com>
2470 commit 25cdbf15e7284eb963070b28dd886aa299af6487
2471 Author: Keith Packard <keithp@keithp.com>
2472 Date: Fri Mar 18 10:48:49 2016 -0700
2474 Change how we detect and install java
2476 Detect by finding 'javaw.exe' in the current path and extracting the
2477 version from the program itself.
2479 Install by simply opening the web browser to java.com and letting the
2480 user install it themselves.
2482 Signed-off-by: Keith Packard <keithp@keithp.com>
2484 commit a7c7e10b3bbfbdf9667d071634cdd6fdf12a1f85
2485 Author: Keith Packard <keithp@keithp.com>
2486 Date: Fri Mar 18 10:17:24 2016 -0700
2488 altos: Expose fast timer API from kernel/
2490 This allows multiple SoCs to provide the same driver interface
2492 Signed-off-by: Keith Packard <keithp@keithp.com>
2494 commit d1af180c2d2a2caf1e13f00d83f2b86ba26de27f
2495 Author: Bart Massey <bart@cs.pdx.edu>
2496 Date: Sat Mar 5 17:38:19 2016 -0800
2498 altos: Fixed timing of panic display LED to be readable
2500 When we don't have a beeper, there's no way to signal a 'warble' for
2501 panic. So, elide that bit.
2503 Second, panic can't use the scheduler and timer because those may not
2504 be running (or may have failed), and so it uses a delay loop. Add a
2505 configurable scale value to the panic loop so that the LED blinks can
2506 be read. For stm32f0 devices, scale that by the sysclk value to
2507 automatically make them of reasonable length.
2509 commit 20d9286402b7da74fef9b7c98e79d13671f6c82b
2510 Author: Keith Packard <keithp@keithp.com>
2511 Date: Sun Mar 6 15:05:51 2016 -0800
2513 libaltos: Add unistd.h to get defines for various syscalls
2515 Signed-off-by: Keith Packard <keithp@keithp.com>
2517 commit ad07578d04926cb4b96c40a446c47ad3f9bad7df
2518 Author: Keith Packard <keithp@keithp.com>
2519 Date: Sun Mar 6 15:04:23 2016 -0800
2521 libaltos: jni_md.h moved to linux subdir in Java install
2523 Add the linux subdir to CFLAGS to find it.
2525 Signed-off-by: Keith Packard <keithp@keithp.com>
2527 commit 7cb388a33104fd78c8cb1fa08a6f114e3e1e372d
2528 Author: Keith Packard <keithp@keithp.com>
2529 Date: Sat Mar 5 14:37:40 2016 -0800
2531 altos/stmf0: Fix build without second USB IN endpoint
2533 The code for the second IN endpoint was using the wrong ifdef.
2535 Signed-off-by: Keith Packard <keithp@keithp.com>
2537 commit 99d3248a390379cfabf821ea4a195072799861eb
2538 Author: Keith Packard <keithp@keithp.com>
2539 Date: Wed Mar 2 14:36:31 2016 -0800
2541 ao-tools: Add ao-chaosread
2543 This reads from the raw descriptor to help validate the hardware.
2545 Signed-off-by: Keith Packard <keithp@keithp.com>
2547 commit 88ee4ac0c91e12a02cc1954ffad0fd8603e24e55
2548 Author: Keith Packard <keithp@keithp.com>
2549 Date: Wed Mar 2 14:01:00 2016 -0800
2551 ao-bringup: Switch to v1.0 for chaoskey
2553 Not going to build any more v0.1 boards. Also, chaoskey now uses the
2554 unique ID for a serial, so we don't need to provide a serial number.
2556 Signed-off-by: Keith Packard <keithp@keithp.com>
2558 commit 3a355d5c84e9d975897fa69a103952a1f1558947
2559 Author: Keith Packard <keithp@keithp.com>
2560 Date: Wed Mar 2 14:00:06 2016 -0800
2562 altos: Add ChaosKey v1.0 product
2564 Much like ChaosKey v0.1, just different SoC package and a few wiring changes.
2566 Signed-off-by: Keith Packard <keithp@keithp.com>
2568 commit 05fcb717bfc44aba3c1cfd43281e323505a46402
2569 Author: Keith Packard <keithp@keithp.com>
2570 Date: Wed Mar 2 13:54:58 2016 -0800
2572 altos/chaoskey: Add another USB endpoint to read raw data
2574 This replaces having the single output switch based on a pin value and
2575 allows us to box the device and still fetch raw data.
2577 For now, this will use a special libusb2 program, ao-chaosread, to
2578 pull bits as I haven't figure out how to make linux provide two
2579 /dev entries for one USB device.
2581 Signed-off-by: Keith Packard <keithp@keithp.com>
2583 commit 05354b8fee6a9af05d66bb7f4761f597da038fdd
2584 Author: Keith Packard <keithp@keithp.com>
2585 Date: Mon Feb 15 15:26:00 2016 -0800
2587 altos/chaoskey: Use SoC device ID as serial number
2589 To make manufacturing these devices tractable, we don't want to
2590 require a custom firmware load for each device, but we still want a
2591 unique serial number. Fortunately, the SoC provides a 96-bit ID which
2594 Signed-off-by: Keith Packard <keithp@keithp.com>
2596 commit 5637c1b2fd7232842245af1437e33b5bb1583c7d
2597 Author: Keith Packard <keithp@keithp.com>
2598 Date: Mon Feb 15 15:24:35 2016 -0800
2600 altos/stmf0: Use device ID as usb serial number if requested
2602 This exposes the hardware device ID (which is unique per-chip) as the
2603 USB serial number, avoiding the need to create a custom ROM image for
2606 Signed-off-by: Keith Packard <keithp@keithp.com>
2608 commit e4006444d3d7b0c499139f58f13353988d38dbb4
2609 Author: Keith Packard <keithp@keithp.com>
2610 Date: Mon Feb 15 15:23:15 2016 -0800
2612 altos/chaoskey: Encode both hardware and software versions in product ID
2614 We have no other way of reporting the software version, so just encode
2615 it in the product ID.
2617 Signed-off-by: Keith Packard <keithp@keithp.com>
2619 commit afef70bb8f31075de364ddf713f3ccf1d9c6361d
2620 Author: Keith Packard <keithp@keithp.com>
2621 Date: Mon Feb 15 14:04:04 2016 -0800
2623 altos/stmf0: Fix location of device_id register
2625 Copied from stm32l and never fixed.
2627 Signed-off-by: Keith Packard <keithp@keithp.com>
2629 commit 0bae4b25882983cd0b7950b3e80b6d93a72f0847
2630 Author: Keith Packard <keithp@keithp.com>
2631 Date: Mon Feb 8 19:15:31 2016 -0800
2633 altos: Another fix for non CDC-ACM devices
2635 Need to set the bInterfaceNumber for the actual interface to zero when
2636 there isn't an INT interface before it.
2638 Signed-off-by: Keith Packard <keithp@keithp.com>
2640 commit e36117ccbf7cbe3704c6b44d3ad429e720a1e16c
2641 Author: Bart Massey <bart.massey@gmail.com>
2642 Date: Mon Feb 8 18:55:28 2016 -0800
2644 Clean up stmf0 adc init.
2646 This better matches the documented cal sequence.
2648 Signed-off-by: Keith Packard <keithp@keithp.com>
2650 commit 5ce26345784459f5864ef59c96c8aa633d2ddf64
2651 Author: Keith Packard <keithp@keithp.com>
2652 Date: Sun Feb 7 22:30:27 2016 -0800
2654 altos/stmf0: Add missing ao_gpio.c
2656 This contains the code for power managing the GPIO pins
2658 Signed-off-by: Keith Packard <keithp@keithp.com>
2660 commit bab082605e3fca6b6d11447c45cd948ddfe74bb9
2661 Author: Keith Packard <keithp@keithp.com>
2662 Date: Sun Feb 7 22:28:34 2016 -0800
2664 altos: Add simple stats test to TRNG code
2666 This detects broken hardware by making sure the standard deviation in
2667 the raw values used to compute each buffer is at least 128.
2669 Signed-off-by: Keith Packard <keithp@keithp.com>
2671 commit 147f0df6a29b37fbfb0824ecd276482f0eecb397
2672 Author: Keith Packard <keithp@keithp.com>
2673 Date: Sun Feb 7 15:33:42 2016 -0800
2675 altos: Delay TRNG ADC long enough for HV supply to stabilize
2677 Looks like it takes about 70ms for the supply to start running right,
2678 so delay after powering it up for that long.
2680 Signed-off-by: Keith Packard <keithp@keithp.com>
2682 commit 1473f9234ffd34d8f37bc489dfc9fc4d7f1b3eed
2683 Author: Keith Packard <keithp@keithp.com>
2684 Date: Sun Feb 7 00:15:47 2016 +1100
2686 altos/chaoskey-v0.1: Add power management and change USB classes
2688 Enable power management.
2689 Expose only a single IN endpoint.
2691 Signed-off-by: Keith Packard <keithp@keithp.com>
2693 commit 235198b85f1583d2792c7028decace61d1b4229e
2694 Author: Keith Packard <keithp@keithp.com>
2695 Date: Sun Feb 7 00:14:22 2016 +1100
2697 altos: Add power management to TRNG driver
2699 Support suspend/resume of the TRNG power supply, delaying after resume
2700 to wait for it to stabilize.
2702 Signed-off-by: Keith Packard <keithp@keithp.com>
2704 commit 2ad756bd1b63a2c8450edd7001628b92279fd1b8
2705 Author: Keith Packard <keithp@keithp.com>
2706 Date: Sun Feb 7 00:10:57 2016 +1100
2708 altos: Allow USB drivers to skip CDC-ACM -specific descriptors
2710 For devices not providing the standard CDC-ACM interface, let them
2711 skip the various descriptors and interfaces to provide a more limited
2712 set of capabilities.
2714 Signed-off-by: Keith Packard <keithp@keithp.com>
2716 commit a5607aad694c01c01c48229172b289f005a1b6bb
2717 Author: Keith Packard <keithp@keithp.com>
2718 Date: Sat Feb 6 22:51:32 2016 +1100
2720 altos/stmf0: Add suspend/resume support
2722 Allow USB suspend to suspend USB, GPIOs and master clock.
2724 Signed-off-by: Keith Packard <keithp@keithp.com>
2726 commit 36c6d74048283d27c890054814eee2cb39b7cbb7
2727 Author: Keith Packard <keithp@keithp.com>
2728 Date: Sat Feb 6 22:47:23 2016 +1100
2730 altos: Add power management APIs
2732 This provides sequenced suspend/resume functionality, allowing modules
2733 to register for power management at configuration time.
2735 Signed-off-by: Keith Packard <keithp@keithp.com>
2737 commit fbb07cf50ba7fa278d1f8201ef376ec12480e9aa
2738 Author: Keith Packard <keithp@keithp.com>
2739 Date: Tue Jan 19 23:55:52 2016 -0800
2741 altos/stmf0: Allow projects to specify non-default stack size
2743 512 may not be suitable for everyone.
2745 Signed-off-by: Keith Packard <keithp@keithp.com>
2747 commit 1d7463befc18f415d8982f04e52729d3bf5b95a9
2748 Author: Keith Packard <keithp@keithp.com>
2749 Date: Tue Jan 19 23:55:32 2016 -0800
2751 altos: remove blank line in stmf0/ao_timer.c
2753 Signed-off-by: Keith Packard <keithp@keithp.com>
2755 commit 35407e664886bed21dcef7764843aac03be8490c
2756 Author: Keith Packard <keithp@keithp.com>
2757 Date: Thu Jan 28 13:58:43 2016 -0800
2759 altos/chaoskey: Delay ADC reading for 250ms at startup
2761 This lets the HV supply stabilize before we start sampling values.
2763 Signed-off-by: Keith Packard <keithp@keithp.com>
2765 commit f2d3202de9a5847923f72afe2969eb7ccd7342c7
2766 Author: Keith Packard <keithp@keithp.com>
2767 Date: Thu Jan 28 00:14:36 2016 -0800
2769 altos/chaoskey: Add support for flipping between raw and cooked bits
2771 Plug the 'force bootloader' thing onto the board while it's running
2772 and it will generate raw bits instead of running them through the CRC
2773 to whiten. Useful for validating the raw hardware.
2775 Signed-off-by: Keith Packard <keithp@keithp.com>
2777 commit 02fd767ab60a9957faa2bff29c62ed954abc34e7
2778 Author: Keith Packard <keithp@keithp.com>
2779 Date: Tue Jan 19 18:30:57 2016 -0800
2781 src/chaoskey-v0.1: Add HV enable support
2783 Turn on the HV supply when the OS starts.
2785 Signed-off-by: Keith Packard <keithp@keithp.com>
2787 commit e5be0be35f724507d7efff48339a297df73d2641
2788 Author: Robert Garbee <robert@gag.com>
2789 Date: Sat Jan 16 10:19:47 2016 -0700
2791 fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work
2793 commit 6a7644a0d179e1eb7d665123157ad76c956e524a
2794 Author: Keith Packard <keithp@keithp.com>
2795 Date: Sun Jan 10 21:39:38 2016 -0800
2797 Releasing: Copy TeleMega v2.0 bits to Binaries
2799 Signed-off-by: Keith Packard <keithp@keithp.com>
2801 commit b53c78e75879d647935a30acb88fdd69467617a7
2802 Merge: a2ea621 64adfbb
2803 Author: Bdale Garbee <bdale@gag.com>
2804 Date: Sun Jan 10 19:15:16 2016 -0700
2806 Merge branch 'master' into branch-1.6
2808 commit 64adfbbb80c90dfe244179d81beaef8a84ed8bd6
2809 Author: Bdale Garbee <bdale@gag.com>
2810 Date: Thu Jul 16 14:47:10 2015 -0600
2812 process updates from 1.6.1 release
2814 commit a2ea621eac3263348aff50885c79296f8ece26ed
2815 Author: Bdale Garbee <bdale@gag.com>
2816 Date: Sun Jan 10 19:08:12 2016 -0700
2818 update Changelog from git log
2820 commit 1681776abc0873bcbbbc5b2b17e15d54a1031f51
2821 Merge: 8830926 aebdcaf
2822 Author: Bdale Garbee <bdale@gag.com>
2823 Date: Sun Jan 10 19:07:49 2016 -0700
2825 Merge branch 'master' into branch-1.6
2827 commit aebdcaf37eafbc13cce695fe65a455e49c6108c3
2828 Author: Bdale Garbee <bdale@gag.com>
2829 Date: Sun Jan 10 19:06:19 2016 -0700
2831 one more time, with feeling .. this time, I've updated pdclib
2833 commit 88309264656220bae6ee941211f7aa1b1dc19944
2834 Author: Bdale Garbee <bdale@gag.com>
2835 Date: Sun Jan 10 19:06:19 2016 -0700
2837 one more time, with feeling .. this time, I've updated pdclib
2839 commit 70e9064ca962dfd345f8a342afa130f969606553
2840 Merge: 489d22f 73ce3f7
2841 Author: Bdale Garbee <bdale@gag.com>
2842 Date: Sun Jan 10 19:04:49 2016 -0700
2844 Merge branch 'master' into branch-1.6
2846 commit 73ce3f73526edfabccd3b98e6e67de6d82a84b63
2847 Author: Bdale Garbee <bdale@gag.com>
2848 Date: Sun Jan 10 18:58:31 2016 -0700
2852 commit cbec66452ecd01bbd5aebf6f98443d5e0540f5d2
2853 Merge: 4043e07 81b8f4d
2854 Author: Bdale Garbee <bdale@gag.com>
2855 Date: Sun Jan 10 18:29:07 2016 -0700
2857 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
2859 commit 81b8f4da612b527915f68f632fbd94a46bc1795f
2860 Author: Keith Packard <keithp@keithp.com>
2861 Date: Sun Jan 10 17:22:35 2016 -0800
2863 doc: Remove extraneous 'first off' from legal paragraph
2867 Signed-off-by: Keith Packard <keithp@keithp.com>
2869 commit 6a00f186a06f22638882f43f49fa0c03ea387eac
2870 Author: Keith Packard <keithp@keithp.com>
2871 Date: Sun Jan 10 17:13:56 2016 -0800
2873 doc: Remove telemini v2.0. Add telemega v2.0
2875 Reflect hardware we've actually shipped.
2877 Signed-off-by: Keith Packard <keithp@keithp.com>
2879 commit 6cbf93995d90fc4790eb77bcaa233742857fe052
2880 Author: Keith Packard <keithp@keithp.com>
2881 Date: Sun Jan 10 17:01:57 2016 -0800
2883 doc: fix typo in using external active switch circuit section
2887 Signed-off-by: Keith Packard <keithp@keithp.com>
2889 commit 3547e65eecbe7bd4e16dc6f2048b7a69f29d05ff
2890 Author: Keith Packard <keithp@keithp.com>
2891 Date: Sun Jan 10 16:59:37 2016 -0800
2893 doc: Update copyright year in altusmetrum doc
2895 And note that this need to be checked for each release in RELNOTES
2897 Signed-off-by: Keith Packard <keithp@keithp.com>
2899 commit 4043e0707cdc77158f709c19dd134f92b4604270
2900 Author: Bdale Garbee <bdale@gag.com>
2901 Date: Sun Jan 10 17:45:45 2016 -0700
2903 modify release procedure to reflect Keith setting version in confgure.ac
2905 commit 2f35e0ba52f538ea1061bfff5bbd772b8a241386
2906 Merge: 86ccbac 3fdaf74
2907 Author: Bdale Garbee <bdale@gag.com>
2908 Date: Sun Jan 10 17:44:03 2016 -0700
2910 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
2912 commit 86ccbac16f5cd0be4a4c11260816b4799cda46f2
2913 Author: Bdale Garbee <bdale@gag.com>
2914 Date: Sun Jan 10 17:43:34 2016 -0700
2916 modify bringup scripts to handle TeleMega v2.0
2918 commit 3fdaf745f98f42f1ec4ae7cc682f47be8d8568eb
2919 Author: Keith Packard <keithp@keithp.com>
2920 Date: Sun Jan 10 14:37:05 2016 -0800
2922 Bump version to 1.6.2, altosdroid to 10
2924 Signed-off-by: Keith Packard <keithp@keithp.com>
2926 commit ebe009b9c7c2f4de3405479f800a33b449fcbb1e
2927 Author: Bdale Garbee <bdale@gag.com>
2928 Date: Sun Jan 10 17:41:38 2016 -0700
2930 now building for m4, too
2932 commit ff9c034dc942ec4bc5cc30cc593ea2165e143d55
2933 Author: Bdale Garbee <bdale@gag.com>
2934 Date: Sun Jan 10 17:38:26 2016 -0700
2936 new build dependency on asciidoc
2938 commit a66e57e0e92cdbd3c6a10b835c50f55647c07351
2939 Author: Keith Packard <keithp@keithp.com>
2940 Date: Sun Jan 10 15:56:21 2016 -0800
2942 altos: Switch PWM constants to end up exposing µsec
2944 This changes the constants so the clock runs at 1MHz, making the step
2945 1µsec each. Then make the period 20000 steps, or 20ms for a 50Hz
2946 frequency as before.
2948 Signed-off-by: Keith Packard <keithp@keithp.com>
2950 commit 4e29bcd07819415ebe44e22536305e9c51d9ae4c
2951 Author: Keith Packard <keithp@keithp.com>
2952 Date: Sun Jan 10 15:44:08 2016 -0800
2954 altos: Set TeleMega v2.0 PWM to support servos
2956 Typical servos use a 50Hz signal with less than 10% duty cycle. Set
2957 the divider to 10 and the range to 64000 to provide a reasonable level
2958 of detail down in the low range.
2960 Signed-off-by: Keith Packard <keithp@keithp.com>
2962 commit 54c20f1caf7f2e09284a9839cfa854d71f5634a2
2963 Author: Keith Packard <keithp@keithp.com>
2964 Date: Sun Jan 10 11:44:17 2016 -0800
2966 Add release notes for 1.6.2
2968 Signed-off-by: Keith Packard <keithp@keithp.com>
2970 commit 7041c386cdf37716f8daf0bc1a9204db620e3de9
2971 Author: Keith Packard <keithp@keithp.com>
2972 Date: Sun Jan 10 12:30:34 2016 -0800
2974 Update java library versions
2976 altoslib is API incompatible with 1.6.1 release due to altos.state updates.
2978 Signed-off-by: Keith Packard <keithp@keithp.com>
2980 commit b560b20cc7d4d5ac219613b29707f7cb8a018273
2981 Author: Keith Packard <keithp@keithp.com>
2982 Date: Sun Jan 10 12:30:11 2016 -0800
2984 altoslib: Remove debug message from AltosMap
2986 Signed-off-by: Keith Packard <keithp@keithp.com>
2988 commit 88671454e931ea5e5946438df3c437493e2356c8
2989 Author: Keith Packard <keithp@keithp.com>
2990 Date: Sun Jan 10 12:21:24 2016 -0800
2992 Elide flight computer info from APRS section of TeleGPS manual
2994 Signed-off-by: Keith Packard <keithp@keithp.com>
2996 commit efd6cd5682be3d0cead71ecfa00f37428b64785f
2997 Author: Keith Packard <keithp@keithp.com>
2998 Date: Sun Jan 10 12:15:50 2016 -0800
3000 Elide pyro channel information from EasyMini docs
3002 Signed-off-by: Keith Packard <keithp@keithp.com>
3004 commit 4344bf3de532f54e0185421975c3c8dff1ac8bc2
3005 Author: Keith Packard <keithp@keithp.com>
3006 Date: Sat Jan 9 21:33:23 2016 -0800
3008 altos: Insert inter telemetry-packet delay
3010 The receivers take some time to reset the radio between packets, so
3011 make sure we don't send back-to-back telemetry too quickly by delaying
3012 after sending each telemetry packet.
3014 commit fe8b7ab9dd1949c53af8f09f08679bdf0280c104
3015 Author: Keith Packard <keithp@keithp.com>
3016 Date: Sat Jan 9 16:28:53 2016 -0800
3018 Switch TeleMega v2.0 to CC1200 radio chip
3020 That's what we're using, after all
3022 Signed-off-by: Keith Packard <keithp@keithp.com>
3024 commit 0fd370af8bc8842000415c4d182d84b4bf6f90fa
3025 Author: Keith Packard <keithp@keithp.com>
3026 Date: Fri Dec 25 23:27:45 2015 -0800
3028 altos: Set AO_PWM_TIMER_SCALE for telemega-v2.0
3030 This is needed to configure the PWM timer correctly
3032 Signed-off-by: Keith Packard <keithp@keithp.com>
3034 commit 742f7c834bb5d651d2bebf2069d4e8facc33390d
3035 Author: Keith Packard <keithp@keithp.com>
3036 Date: Fri Dec 25 23:20:29 2015 -0800
3038 altos: Get stm32l pwm driver working
3040 Fix the CCMR1_OC1PE and CCMR2_OC3PE values.
3041 Disable clock when no PWM outputs are running.
3042 Fix the apb1enr value for the timer.
3043 Set ARR value to PWM_MAX - 1 -- ARR is off by one.
3044 Sets the GPIO pins to 40MHz bandwidth for sharper edges.
3046 Tested on EasyMega, but that code is not included as it breaks the
3049 Signed-off-by: Keith Packard <keithp@keithp.com>
3051 commit 8aa0ab9fe9ca41f6d520d388973164bc0c599a06
3052 Author: Keith Packard <keithp@keithp.com>
3053 Date: Thu Dec 24 00:28:59 2015 -0800
3055 altos: Add TeleMega v2.0, including PWM driver
3057 Signed-off-by: Keith Packard <keithp@keithp.com>
3059 commit a1b760d0a01e7087bcc214fcd395541fbf268fe8
3060 Author: Keith Packard <keithp@keithp.com>
3061 Date: Wed Dec 23 10:18:24 2015 -0800
3063 ao-tools/ao-dbg: Stop using sigvec
3065 Signed-off-by: Keith Packard <keithp@keithp.com>
3067 commit f28d59ddf3e1b763ce5757f572e79085963818e9
3068 Author: Keith Packard <keithp@keithp.com>
3069 Date: Sat Nov 14 00:01:05 2015 -0800
3071 doc: Remove some bogus bits from am.css
3073 Just commented out stuff which had a nested comment and was thus invalid
3075 Signed-off-by: Keith Packard <keithp@keithp.com>
3077 commit 19f700f1c99d2f3dcd8775cc629037312d853ee1
3078 Author: Keith Packard <keithp@keithp.com>
3079 Date: Fri Nov 13 23:36:02 2015 -0800
3081 doc: Construct html index for documentation
3083 This gets uploaded to keith's machine as an easy way to see what's available.
3085 Signed-off-by: Keith Packard <keithp@keithp.com>
3087 commit 688c5ee98565a25e77c8618e1957ed3b8eff5a56
3088 Author: Keith Packard <keithp@keithp.com>
3089 Date: Fri Nov 13 23:17:11 2015 -0800
3091 doc: Try a different trick for asciidoc build issues
3093 asciidoc creates temp files in the current directory using basename of
3094 the source filename. Doing html and pdf builds in parallel causes
3095 chaos as a result. Fix this by having the pdf target build both
3096 serially, and then have the html target just depend on the pdf target.
3098 Signed-off-by: Keith Packard <keithp@keithp.com>
3100 commit 992c0eab6275cec7d5035b99952537fd7ece2ed4
3101 Author: Keith Packard <keithp@keithp.com>
3102 Date: Fri Nov 13 22:55:35 2015 -0800
3104 doc: Split out EasyMini into a separate manual
3106 EasyMini uses a tiny fraction of the overall system software;
3107 splitting the manual out makes it a lot smaller.
3109 Signed-off-by: Keith Packard <keithp@keithp.com>
3111 commit b030dfb3df859b3b3cb9c666394f315edcd11f49
3112 Author: Keith Packard <keithp@keithp.com>
3113 Date: Fri Nov 13 20:59:25 2015 -0800
3115 doc: Reformat html versions a bit
3117 Color more text black, including toc. Add a bit of space around the
3118 toc. Make paragraph labels bold.
3120 Signed-off-by: Keith Packard <keithp@keithp.com>
3122 commit 6260ee1419ba5c122939b28e3e8fc6f8ecf48928
3123 Author: Keith Packard <keithp@keithp.com>
3124 Date: Fri Nov 13 20:58:58 2015 -0800
3126 doc: Move pad beeps table to usage chapter
3128 This places all of the sound information in one place.
3130 Signed-off-by: Keith Packard <keithp@keithp.com>
3132 commit 2133c235af9511a42b65b239c6fcbeafa0e6d272
3133 Author: Keith Packard <keithp@keithp.com>
3134 Date: Fri Nov 13 20:58:08 2015 -0800
3136 doc: Provide more actual links instead of just chapter names
3138 Replace 'see chapter "foo"' with 'see <<foo>>' so that a link is
3139 created to directly go to the relevant text.
3141 Signed-off-by: Keith Packard <keithp@keithp.com>
3143 commit 87cb41dfa07153b4dc44f723c65888945b3a11b1
3144 Author: Keith Packard <keithp@keithp.com>
3145 Date: Fri Nov 13 20:56:45 2015 -0800
3147 doc: Reformat 'Using MicroPeak' section
3149 Use labeled paragraphs to make the steps stand out.
3151 Signed-off-by: Keith Packard <keithp@keithp.com>
3153 commit 4c1206a47431c7d873228fdd7328e1b9ac93a390
3154 Author: Keith Packard <keithp@keithp.com>
3155 Date: Fri Nov 13 19:45:02 2015 -0800
3157 Break out common pieces from TeleGPS and AltusMetrum
3159 This creates shared files for portions of the TeleGPS and AltusMetrum
3160 manual to avoid duplicating text between the two.
3162 Signed-off-by: Keith Packard <keithp@keithp.com>
3164 commit ef2ba847ca53a8ddfcddd4e51a0dd43c45161c85
3165 Author: Keith Packard <keithp@keithp.com>
3166 Date: Sun Nov 1 21:05:20 2015 -0800
3168 doc: Add product logos to books
3170 This places the product logo on the title verso in pdf form, and above
3171 the TOC in html form.
3173 Signed-off-by: Keith Packard <keithp@keithp.com>
3175 commit 8642690da76a86736b97026e2a259d8cbad26262
3176 Author: Keith Packard <keithp@keithp.com>
3177 Date: Sun Nov 1 06:20:27 2015 -0800
3179 altosui: telemini outline pdf changed name
3181 It's now telemini-outline.pdf, just like the other outline files.
3183 Signed-off-by: Keith Packard <keithp@keithp.com>
3185 commit c877ecce7b67272eb6dcba50a58b59cd1cbfa5ab
3186 Author: Keith Packard <keithp@keithp.com>
3187 Date: Sun Nov 1 05:43:59 2015 -0800
3189 doc: verbose mode for a2x
3191 commit 13d03ee8ba3a300ef2a3a380b60f08dbe37793b0
3192 Author: Keith Packard <keithp@keithp.com>
3193 Date: Sun Nov 1 05:08:27 2015 -0800
3195 doc: Make pdf titles less ridiculously large
3197 Instead of having them grow at 20% per nesting level, use 10% instead.
3199 Signed-off-by: Keith Packard <keithp@keithp.com>
3201 commit 553d9041b52cbb88662fcc5e6a277ce43bd151cd
3202 Author: Keith Packard <keithp@keithp.com>
3203 Date: Sun Nov 1 04:23:56 2015 -0800
3205 doc: Get images and tables all centered and labeled
3207 A bunch of images were using image: instead of image:: and some images
3208 and tables were missing titles.
3210 Signed-off-by: Keith Packard <keithp@keithp.com>
3212 commit edcb80f25875200a73269045db71c1579b0c2c82
3213 Author: Keith Packard <keithp@keithp.com>
3214 Date: Sun Nov 1 04:22:27 2015 -0800
3216 doc: Split revhistory to separate file for html docs
3218 This avoids having the revhistory clutter the top of the document.
3220 Signed-off-by: Keith Packard <keithp@keithp.com>
3222 commit 1c0f2cd7cbd8fa1360d6b18a1bf8ac0707634aa4
3223 Author: Keith Packard <keithp@keithp.com>
3224 Date: Sun Nov 1 04:20:18 2015 -0800
3226 doc: Place html book contents on left side of page with separate scrollbar
3228 This lets the user see the toc while browsing the document
3230 Signed-off-by: Keith Packard <keithp@keithp.com>
3232 commit f2816b305fc9e18a1190e392d43ff489936f10f0
3233 Author: Keith Packard <keithp@keithp.com>
3234 Date: Sun Nov 1 04:18:34 2015 -0800
3236 doc: Switch to free fonts. Publish fonts with docs.
3238 Signed-off-by: Keith Packard <keithp@keithp.com>
3240 commit 5b782c8f45ed6c34ed0e7f1aff6ac298c9a879ff
3241 Author: Keith Packard <keithp@keithp.com>
3242 Date: Sat Oct 31 23:54:26 2015 -0700
3244 doc: Minor makefile cleanups
3246 Signed-off-by: Keith Packard <keithp@keithp.com>
3248 commit 22f399b13fbbc980315a1f6a9f5616586b680d77
3249 Author: Keith Packard <keithp@keithp.com>
3250 Date: Sat Oct 31 23:36:03 2015 -0700
3252 doc: Convert telemetry and companion docs to asciidoc
3254 Signed-off-by: Keith Packard <keithp@keithp.com>
3256 commit 14ad137fd14707bc7b45a3512a4a6f81915ca1c1
3257 Author: Keith Packard <keithp@keithp.com>
3258 Date: Sat Oct 31 22:40:13 2015 -0700
3260 doc: Convert AltOS doc to asciidoc
3262 It's still pretty stale, but at least it isn't in docbook?
3264 Signed-off-by: Keith Packard <keithp@keithp.com>
3266 commit ce297f14ff54d230d01fb6dedaafca571e8b836b
3267 Author: Keith Packard <keithp@keithp.com>
3268 Date: Sat Oct 31 21:34:42 2015 -0700
3270 doc: Finish converting docs to asciidoc format
3272 Signed-off-by: Keith Packard <keithp@keithp.com>
3274 commit 9aed128dc0aab5d49e1b3264c864a6c3e929bffe
3275 Author: Keith Packard <keithp@keithp.com>
3276 Date: Sat Oct 31 14:54:20 2015 -0700
3278 doc: Add titles to all figures
3280 Signed-off-by: Keith Packard <keithp@keithp.com>
3282 commit 7ef958cbb51a04079e2a4833917ccef57ae5a2ee
3283 Author: Keith Packard <keithp@keithp.com>
3284 Date: Thu Oct 29 20:32:58 2015 -0700
3286 doc: Add updating firmware and using am products asciidoc bits
3288 This finishes the asciidoc transition
3290 Signed-off-by: Keith Packard <keithp@keithp.com>
3292 commit 41aca78e3f7c17433e3c77cd3c596bbf8acab7cb
3293 Author: Keith Packard <keithp@keithp.com>
3294 Date: Thu Oct 29 18:38:46 2015 -0700
3296 doc: Add asciidoc version of Altos Droid manual
3298 Signed-off-by: Keith Packard <keithp@keithp.com>
3300 commit 5ddf9525f94f38c20327d1f2b43917e43519b949
3301 Author: Keith Packard <keithp@keithp.com>
3302 Date: Thu Oct 29 18:14:38 2015 -0700
3304 doc: Add asciidoc version of altosui chapter.
3306 Signed-off-by: Keith Packard <keithp@keithp.com>
3308 commit adfbccfeb551c9d0315116912e7255a173fc3103
3309 Author: Keith Packard <keithp@keithp.com>
3310 Date: Thu Oct 29 16:49:00 2015 +0900
3312 doc: Lots more conversion from docbook to asciidoc
3314 Signed-off-by: Keith Packard <keithp@keithp.com>
3316 commit c5fd0eaa786a122580ba9a3ef7bfc0f2cfd8263b
3317 Author: Keith Packard <keithp@keithp.com>
3318 Date: Thu Oct 29 15:50:31 2015 +0900
3320 doc: Add asciidoc telemini v1.0
3322 Signed-off-by: Keith Packard <keithp@keithp.com>
3324 commit 8cf466d7a767a20387a8d9d6ec81ee00af3fe4a7
3325 Author: Keith Packard <keithp@keithp.com>
3326 Date: Thu Oct 29 12:12:15 2015 +0900
3328 doc: Start doc transition to asciidoc
3330 Signed-off-by: Keith Packard <keithp@keithp.com>
3332 commit c1ca80318102af122cb7b5380331e37795280761
3333 Author: Keith Packard <keithp@keithp.com>
3334 Date: Tue Oct 13 13:52:32 2015 -0700
3336 doc: Force FOP to read images from doc directory
3338 Looks like something changed and fop is now reading from the directory
3339 containing the source file. xmlto places that source in /tmp, making
3340 all relative URIs fail. Fix this by creating a fop configuration file
3341 directing it to load relative to the doc directory and then pass that
3344 Signed-off-by: Keith Packard <keithp@keithp.com>
3346 commit 0ae116dd8779fd0594d443a735e7b6834ea9b713
3347 Author: Keith Packard <keithp@keithp.com>
3348 Date: Sat Oct 10 14:10:59 2015 -0700
3350 telelco: Fix pad reset to one on radio signal loss
3352 The pad number was getting reset back to one when signal was lost,
3353 causing pad one to get fired in this case even when already set to arm mode.
3355 Signed-off-by: Keith Packard <keithp@keithp.com>
3357 commit 6659d08c41d89e4aa3d5e849c066a91bb09f2dd7
3358 Author: Keith Packard <keithp@keithp.com>
3359 Date: Mon Sep 21 07:03:30 2015 +0100
3361 Create directory on keithp.com when uploading devel version
3363 Signed-off-by: Keith Packard <keithp@keithp.com>
3365 commit 926522c6791c2a5529ea24ebd67eea45350e3526
3366 Author: Keith Packard <keithp@keithp.com>
3367 Date: Mon Sep 21 07:01:19 2015 +0100
3369 altoslib: Keep downloading when a parse error occurs
3371 Eventually, we'll hit a block with no valid data and give up. Until
3372 then, keep going in case the flight computer glitched and wrote bad data.
3374 Signed-off-by: Keith Packard <keithp@keithp.com>
3376 commit 431c713389dc819d2433d893c898ff82c7941722
3377 Author: Keith Packard <keithp@keithp.com>
3378 Date: Mon Sep 21 06:32:52 2015 +0100
3380 altoslib: Clean up remaining direct AltosState.state users
3382 This value has been hidden to avoid having it written accidentally;
3383 there were a few more bits of code using it though.
3385 Signed-off-by: Keith Packard <keithp@keithp.com>
3387 commit c1dec3bec0789e8934a6e13fd117931ba468b318
3388 Author: Keith Packard <keithp@keithp.com>
3389 Date: Mon Sep 21 06:27:26 2015 +0100
3391 Bump release number to 1.6.1.1
3393 Signed-off-by: Keith Packard <keithp@keithp.com>
3395 commit 0f8272852b12cf7a349cd9fd07f17c55cdb335a1
3396 Author: Keith Packard <keithp@keithp.com>
3397 Date: Mon Sep 21 06:25:49 2015 +0100
3399 altoslib: Make sure .eeprom download file is flushed on exception
3401 Flush and close the eeprom file even if an exception occurs to make
3402 sure that contents of the file aren't lost.
3404 Signed-off-by: Keith Packard <keithp@keithp.com>
3406 commit a81d028dc62a0a624051fc3c9debb9687fda931e
3407 Author: Keith Packard <keithp@keithp.com>
3408 Date: Mon Sep 21 06:00:36 2015 +0100
3410 altosuilib: In display thread, set new state synchronously
3412 When replaying telemetry, received_time gets set by both the
3413 telemetry reader (when the file is initially read) and by the replay
3414 reader (as the telemetry is processed). Because these two events are
3415 separated by the time it takes to play the file, the second time is
3416 the one we want for figuring out how long since the last telemetry
3417 packet. However, if we set the global state when pulling the state out
3418 of the telemetry reader, and then the replay reader pauses for a long
3419 time, then the voice output thread sees the intermediate time value
3420 and thinks that it has been a long time since the last packet was
3421 received and reports that the rocket may have crashed.
3423 Fix this by just holding the read state until it has been passed by
3424 the replay reader and had the received_time set to current time.
3426 Signed-off-by: Keith Packard <keithp@keithp.com>
3428 commit f61c2b73f3b63aa9c3f0fbccede89c71580089ba
3429 Author: Keith Packard <keithp@keithp.com>
3430 Date: Sun Sep 13 22:27:10 2015 -0700
3432 altosdroid: Add minus sign and decimal point to lat/lon input fields
3434 Some android devices always have change-sign and decimal-point keys
3435 visible, but some do not. Make sure they're available for lat/lon input.
3437 Signed-off-by: Keith Packard <keithp@keithp.com>
3439 commit 9dae5f76c5691dc94c02839eb1321426f96f2134
3440 Author: Keith Packard <keithp@keithp.com>
3441 Date: Sun Sep 13 22:24:47 2015 -0700
3443 altos/telelco: Adjust drag race UI
3445 Enter/leave drag race is done by rotating the box selector knob
3446 to a new 'dr' position and then holding down the firing button; this
3447 avoids a potential accidental firing if you somehow don't realize
3448 you've armed the box before selecting drag race mode.
3450 Signed-off-by: Keith Packard <keithp@keithp.com>
3452 commit 618f7ac8f31941fcbb3ed91829de69c0f0be8e0b
3453 Author: Keith Packard <keithp@keithp.com>
3454 Date: Sat Sep 12 20:41:37 2015 -0700
3456 altoslib: Rotation off by factor of two
3458 The rotation computation was off by a factor of two when converting
3459 the rates to a quaternion (the quaternion needs to be half of the
3460 actual rotation amount). This ended up presenting a tilt angle of
3461 twice what it should be.
3463 Signed-off-by: Keith Packard <keithp@keithp.com>
3465 commit 0afa07d3c1dcb5e301fcb8b4edfecdd961662478
3466 Author: Keith Packard <keithp@keithp.com>
3467 Date: Sat Sep 12 19:20:49 2015 -0700
3469 altoslib: Hide 'state' member and use accessor function
3471 Someone was smashing the state to 'landed' when no packets had been
3472 received for a while. Found that by making it impossible for anyone
3473 outside of AltosState to change the value.
3475 Signed-off-by: Keith Packard <keithp@keithp.com>
3477 commit 7064bc685aebeef07711e525dea4d5fbe33d235b
3478 Merge: ea1d241 dda3f45
3479 Author: Bdale Garbee <bdale@gag.com>
3480 Date: Tue Sep 29 00:46:42 2015 -0600
3482 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
3484 commit ea1d24151cf76ae8f2368673317b66958e2508c4
3485 Author: Bdale Garbee <bdale@gag.com>
3486 Date: Tue Sep 29 00:45:27 2015 -0600
3488 add automatic Bluetooth functionality check to turnon_telebt
3490 commit dda3f459eaff8d4e41cb44584c8ef77b8e2b3b1c
3491 Author: Keith Packard <keithp@keithp.com>
3492 Date: Sat Aug 29 17:29:00 2015 -0700
3494 altos/telelco: Add drag race UI
3496 With the unit disarmed, press and hold the fire button for five
3497 seconds to enable drag race mode.
3499 The display will show 'dr' for five seconds and beep five times to
3500 indicate that drag race mode is enabled. The decimal points in the
3501 display will all be displayed as an additional visual aid. Once every
3502 five seconds, it will beep.
3504 With drag race mode enabled, you can select a box/pad pair and press
3505 the 'fire' button to add it to the drag race group. For the current
3506 box, all members of the drag race group will have their continuity
3507 LEDs blink slowly. There will be no indication of continuity in this
3508 mode; you'll want to check that before enabling drag race mode. If you
3509 want to de-select a member of the group, just press the fire button
3510 again. Each time you push the fire button, it will beep out the pad
3511 number added or removed.
3513 Arm the box and you will not be able to add or remove members from the
3514 drag race group. Firing will simultaneously fire all members of the
3517 To disable drag race mode, press and hold the fire button for two
3518 seconds. It will beep twice and turn off the decimal points in the display.
3520 Signed-off-by: Keith Packard <keithp@keithp.com>
3522 commit 55c1be449ef7ce389a3d94686051d272c858bee4
3523 Author: Keith Packard <keithp@keithp.com>
3524 Date: Sat Aug 29 13:21:19 2015 -0700
3526 altos/telelco: Infrastructure changes for drag racing
3528 This makes the lco management code support arming multiple pads and
3529 firing all of them at once. The UI code does not expose this yet.
3531 Signed-off-by: Keith Packard <keithp@keithp.com>
3533 commit 2839796ca5ace5f0c79643afc1a868893246b621
3534 Author: Keith Packard <keithp@keithp.com>
3535 Date: Sat Aug 29 13:20:16 2015 -0700
3537 altos: Provide direct segment driving interface for LCD displays
3539 This exposes a simple bit-mask for setting the seven segments instead
3540 of just allowing hex-decimal values.
3542 Signed-off-by: Keith Packard <keithp@keithp.com>
3544 commit 368f87918547f89e7eb2a92990621e75e07a3b25
3545 Author: Keith Packard <keithp@keithp.com>
3546 Date: Sat Aug 29 13:18:46 2015 -0700
3548 altos/telefire: No reply for ARMED. Ignore time for FIRE.
3550 This will let us do drag races by letting the LCO arm multiple boxes
3551 and fire them all with a single command.
3553 Signed-off-by: Keith Packard <keithp@keithp.com>
3555 commit f491eec1b950e4ad35a535db254a27a3dd2ad430
3556 Author: Keith Packard <keithp@keithp.com>
3557 Date: Thu Aug 20 23:02:04 2015 -0700
3559 altos: Add HAS_COMPANION to new boards with companion connectors
3561 Thanks much to Rob Derstadt for discovering this bug!
3563 TeleMetrum v2.0, TeleMega, EasyMega, TeleBalloon v2.0 all have
3564 companion connectors and yet HAS_COMPANION was not defined. This
3565 disabled companion telemetry packets on these products, but otherwise
3566 didn't have any effect.
3568 Signed-off-by: Keith Packard <keithp@keithp.com>
3570 commit b4064bf63bb95c58d74869f4ff3e440370d64692
3571 Author: Keith Packard <keithp@keithp.com>
3572 Date: Thu Aug 20 10:51:11 2015 -0700
3574 ao-telem: Add companion packet telemetry data printing
3576 Signed-off-by: Keith Packard <keithp@keithp.com>
3578 commit 73dd2e2c73c42f6ce949b4aa7992f63610962c37
3579 Author: Keith Packard <keithp@keithp.com>
3580 Date: Thu Aug 20 10:50:30 2015 -0700
3582 altoslib: Add companion telemetry data support
3584 This got lost in the great telemetry rewrite
3586 Signed-off-by: Keith Packard <keithp@keithp.com>
3588 commit 489d22f448d9927533e90da4d16c5a332a234a8d
3589 Merge: 570daac eaab49a
3590 Author: Bdale Garbee <bdale@gag.com>
3591 Date: Sun Aug 16 17:53:40 2015 +0200
3593 Merge branch 'master' into branch-1.6
3595 commit eaab49ab1859ebe236a201f93b5352e67aa7ed2b
3596 Author: Bdale Garbee <bdale@gag.com>
3597 Date: Sun Aug 16 17:43:32 2015 +0200
3599 apply wrap-and-sort to control files
3601 commit 909b048a4797b2477279750a77a82c6f5f2776d0
3602 Author: Bdale Garbee <bdale@gag.com>
3603 Date: Fri Aug 7 20:52:48 2015 -0600
3605 turnon script for TeleBT v3.0
3607 commit 9e40f97b013256650364a2a7be96d7d2216ed778
3608 Author: Bdale Garbee <bdale@gag.com>
3609 Date: Fri Jul 31 10:47:08 2015 -0600
3611 add a paragraph about TeleBT battery charging to AltosDroid chapter in documentation
3613 commit 773b23c48f67564eec83fc3ee085862c547ad160
3614 Author: Bdale Garbee <bdale@gag.com>
3615 Date: Tue Jul 28 01:34:25 2015 -0600
3617 move turnon_teledongle to new cal-freq code
3619 commit 570daace9caf7647a09c53d5c75593cc4c98b93b
3620 Author: Bdale Garbee <bdale@gag.com>
3621 Date: Thu Jul 16 13:36:13 2015 -0600
3623 changelog for 1.6.1 release
3625 commit 6e9bb9178356620bd47d9f2e31abf42b7f1a8f11
3626 Merge: e2cefd8 87c8bb3
3627 Author: Bdale Garbee <bdale@gag.com>
3628 Date: Thu Jul 16 13:31:42 2015 -0600
3630 Merge branch 'master' into branch-1.6
3632 commit 87c8bb3956897830da1f7aaca2990a9571767b73
3633 Merge: 643c2fb d6445b3
3634 Author: Bdale Garbee <bdale@gag.com>
3635 Date: Thu Jul 16 07:54:35 2015 -0600
3637 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
3639 commit d6445b3739ac2c5dd040efdb97317a6b2a48044a
3640 Author: Keith Packard <keithp@keithp.com>
3641 Date: Wed Jul 15 18:31:05 2015 -0700
3643 Bump Java library versions
3645 Avoid problems if you have an old version of the library installed
3647 Signed-off-by: Keith Packard <keithp@keithp.com>
3649 commit 643c2fb03833d658320f476ef731bbb06fe3cc31
3650 Merge: e41786f 271f56a
3651 Author: Bdale Garbee <bdale@gag.com>
3652 Date: Wed Jul 15 16:43:50 2015 -0600
3654 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
3656 commit 271f56a41c7e785b0fab7e572325df842d104277
3657 Author: Keith Packard <keithp@keithp.com>
3658 Date: Wed Jul 15 11:41:03 2015 -0700
3660 Bump configure.ac versions to 1.6.1
3662 And set android version to 9
3664 Signed-off-by: Keith Packard <keithp@keithp.com>
3666 commit 3cb5b31a534ab0c987667f37c976a5cd589d42a5
3667 Author: Keith Packard <keithp@keithp.com>
3668 Date: Wed Jul 15 11:40:24 2015 -0700
3670 doc: Update for 1.6.1
3672 Signed-off-by: Keith Packard <keithp@keithp.com>
3674 commit 7338719414ec2c34235c368a55934be0765661c1
3675 Author: Keith Packard <keithp@keithp.com>
3676 Date: Sat Jul 11 22:33:07 2015 -0700
3678 Bump version to 1.6.0.4 (android version 8)
3680 Signed-off-by: Keith Packard <keithp@keithp.com>
3682 commit 52dc7dc5a791f3e7e307ae11f5c6a20b5bf71ba6
3683 Author: Keith Packard <keithp@keithp.com>
3684 Date: Sat Jul 11 22:31:47 2015 -0700
3686 altosdroid: Cleanup Makefile.am
3688 Avoid re-creating library symlinks.
3689 Make builds depend on resource files too.
3691 Signed-off-by: Keith Packard <keithp@keithp.com>
3693 commit c4af5cb233013b35d6763f5adf8d11b47f847111
3694 Author: Keith Packard <keithp@keithp.com>
3695 Date: Sat Jul 11 22:17:16 2015 -0700
3697 altosdroid: Clean up tab layout
3699 Fuss with weights and gravitys, then add some wrapping layouts to get
3700 things looking reasonable on small and larger screens.
3702 Signed-off-by: Keith Packard <keithp@keithp.com>
3704 commit e41786fb384892961a6547e17812a24314ce9623
3705 Author: Bdale Garbee <bdale@gag.com>
3706 Date: Sat Jul 11 22:59:34 2015 -0600
3708 add debian branch spec to vcs-git: line in control so Debian tools work right
3710 commit 251263f72a1c189aac709d3d0410eb916a9f66d6
3711 Author: Keith Packard <keithp@keithp.com>
3712 Date: Sat Jul 11 20:37:16 2015 -0700
3714 altosdroid: Add 'Auto' to map tracker list
3716 Add an 'auto' menu entry when selecting trackers from the map.
3718 Signed-off-by: Keith Packard <keithp@keithp.com>
3720 commit 2997c9720f58b2955925e4e99c11a6ec302114a9
3721 Author: Keith Packard <keithp@keithp.com>
3722 Date: Sat Jul 11 20:36:18 2015 -0700
3724 altosdroid: Note time at startup to avoid flipping trackers
3726 Need to set the initial 'switch' time in onStart to avoid flipping
3727 between trackers before we've done any other 'switching' action.
3729 Signed-off-by: Keith Packard <keithp@keithp.com>
3731 commit 2a85f273e33a316bd044c4c8dce17c19633cffe6
3732 Author: Keith Packard <keithp@keithp.com>
3733 Date: Sat Jul 11 20:21:34 2015 -0700
3735 Generate Android version info from configure.ac
3737 This avoids having version data in two places.
3739 Signed-off-by: Keith Packard <keithp@keithp.com>
3741 commit ed682ca39496849b6c0d6bdf81bee6263864895f
3742 Author: Keith Packard <keithp@keithp.com>
3743 Date: Sat Jul 11 19:55:43 2015 -0700
3745 altosdroid: Add other igniter status, various other layout changes
3747 Show the first four igniters (A-D) in the pad tab. Make pad and flight
3748 layouts look a bit better
3750 Signed-off-by: Keith Packard <keithp@keithp.com>
3752 commit 84021b8e0ab9262262345ce47671c3c0c6c43566
3753 Author: Keith Packard <keithp@keithp.com>
3754 Date: Sat Jul 11 19:54:36 2015 -0700
3756 altosdroid: Don't disconnect from bluetooth onStartCommand
3758 If we've already got a bluetooth connection running, don't slam it
3759 shut when the UI starts up again.
3761 Signed-off-by: Keith Packard <keithp@keithp.com>
3763 commit bdc953e26ac2dd67021f905807324c6a02e49690
3764 Author: Keith Packard <keithp@keithp.com>
3765 Date: Sat Jul 11 19:54:07 2015 -0700
3767 altosdroid: Remove a debug line in AltosVoice
3769 Signed-off-by: Keith Packard <keithp@keithp.com>
3771 commit 51bf46248ca7ee3c817e62274b7366258c9f87cf
3772 Author: Keith Packard <keithp@keithp.com>
3773 Date: Sat Jul 11 19:53:06 2015 -0700
3775 altosdroid: Pop up menu of nearby trackers on map click
3777 This lets the user select one of potentially many overlapping
3778 trackers, and also makes it clear when the current tracker is being
3781 Signed-off-by: Keith Packard <keithp@keithp.com>
3783 commit b64ab2a8a25b0c22443bc77829c7f35b4f1c2455
3784 Author: Keith Packard <keithp@keithp.com>
3785 Date: Sat Jul 11 19:17:40 2015 -0700
3787 altosdroid: Keep speaking even when screen is off
3789 Move the voice and telemetry disabling calls from onStop to onDestroy
3790 so that a stopped application only leaves off updating the screen, and
3791 not the voice bits as well.
3793 Signed-off-by: Keith Packard <keithp@keithp.com>
3795 commit d015cfc1499a263549f52d46e9e5b934fcb94f53
3796 Author: Keith Packard <keithp@keithp.com>
3797 Date: Sat Jul 11 19:15:08 2015 -0700
3799 altoslib: Preload maps based on distance rather than number of tiles
3801 This lets you get the specific area requested at all zoom levels,
3802 rather than having further detail only at lower resolution zooms.
3804 Signed-off-by: Keith Packard <keithp@keithp.com>
3806 commit afa37e4667ace42c1f43b01b613e639772cfeb75
3807 Author: Keith Packard <keithp@keithp.com>
3808 Date: Sat Jul 11 19:13:37 2015 -0700
3810 altoslib: Convert longitude from distance in AltosMapTransform
3812 This computes the longitude cooresponding to a specific distance at a
3815 Signed-off-by: Keith Packard <keithp@keithp.com>
3817 commit 1b6f3de0a547fa452d5c40775bcf59c49b229e5e
3818 Author: Keith Packard <keithp@keithp.com>
3819 Date: Sat Jul 11 19:11:48 2015 -0700
3821 altoslib: Limit simultanous map tile downloads to 128
3823 Before this change, every tile requested would get downloaded at the
3824 same time. With moving to distance-based offline map loading radius
3825 values, the number of tiles at closer zooms was in the thousands,
3826 overwhelming the network.
3828 Signed-off-by: Keith Packard <keithp@keithp.com>
3830 commit b313a5a3d5aba89330c0e20eeac00cc571828953
3831 Author: Keith Packard <keithp@keithp.com>
3832 Date: Sat Jul 11 19:10:44 2015 -0700
3834 altoslib: Make earth size constants public
3836 This lets other code share the values.
3838 Signed-off-by: Keith Packard <keithp@keithp.com>
3840 commit a9bc364ecc69d9085146a39198f0671de164eb2e
3841 Author: Keith Packard <keithp@keithp.com>
3842 Date: Sat Jul 11 19:09:28 2015 -0700
3844 altoslib: Make AltosMap floor/ceil static. Check transform in paint
3846 This avoids crashing in paint when no transform has been set yet.
3848 Signed-off-by: Keith Packard <keithp@keithp.com>
3850 commit 002c523fae9369f0261c28f33152289d965d406b
3851 Author: Keith Packard <keithp@keithp.com>
3852 Date: Thu Jun 25 18:40:21 2015 -0700
3854 telegps: Add receiver battery to Status display
3856 Makes it a bit cramped, but it's useful to have if you're using TeleBT.
3858 Signed-off-by: Keith Packard <keithp@keithp.com>
3860 commit 3d508b66c2a15286bb9af88e4d92209463e0725d
3861 Author: Keith Packard <keithp@keithp.com>
3862 Date: Thu Jun 25 18:35:07 2015 -0700
3864 altosui: Correctly show/hide receiver battery value
3866 Override the hide() test function which has the listener_state
3868 Signed-off-by: Keith Packard <keithp@keithp.com>
3870 commit f76d5e4fc2ed1e0d79c096cc89793d671ecb78c3
3871 Author: Keith Packard <keithp@keithp.com>
3872 Date: Thu Jun 25 18:33:46 2015 -0700
3874 altosuilib: Receiver battery voltage lives in listener_state
3876 The code to detect whether to show or hide this entry was using
3877 functions that weren't given the listener_state and hence returned
3878 MISSING all of the time.
3880 Signed-off-by: Keith Packard <keithp@keithp.com>
3882 commit 7c0f66bf64f410415afaff1b5c8e1443512b7a57
3883 Author: Keith Packard <keithp@keithp.com>
3884 Date: Thu Jun 25 18:31:29 2015 -0700
3886 altoslib: Support TeleBT v3.0 battery voltage conversion
3888 TeleBT v3.0 uses an STM32 instead of a cc1111, so it needs a different
3889 voltage computation from the raw ADC value.
3891 Signed-off-by: Keith Packard <keithp@keithp.com>
3893 commit ee1b0bd05bedb8a5a631cc79c77fde8fd920ac38
3894 Author: Keith Packard <keithp@keithp.com>
3895 Date: Thu Jun 25 18:42:29 2015 -0700
3897 altos/telebt-v3.0: Report battery voltage correctly
3899 There was an extra %d, and an extra ':' in the output, making the UI
3900 not parse the voltage correctly
3902 Signed-off-by: Keith Packard <keithp@keithp.com>
3904 commit 6ecd75a7abb5fcee440f7672082013088634680b
3905 Author: Keith Packard <keithp@keithp.com>
3906 Date: Thu Jun 25 12:23:04 2015 -0700
3908 altoslib: Don't crash if dragging a map view without any tiles
3910 Signed-off-by: Keith Packard <keithp@keithp.com>
3912 commit 06908e377b7b932bfe3f6dfc840a0a13340f32ce
3913 Author: Keith Packard <keithp@keithp.com>
3914 Date: Thu Jun 25 12:22:04 2015 -0700
3916 altosdroid: Class of offline map view widget changed
3918 Switch around AltosViewPager to match.
3920 Signed-off-by: Keith Packard <keithp@keithp.com>
3922 commit 71d924288d45b09ae655d06df9780ba286e3f3be
3923 Author: Keith Packard <keithp@keithp.com>
3924 Date: Wed Jun 24 12:02:22 2015 -0700
3926 altosdroid: Display direction in map view
3928 Use direction in map view when available, otherwise use bearing
3930 Signed-off-by: Keith Packard <keithp@keithp.com>
3932 commit c7067f14359d25a8275f2b09e7b30c06c0424dbb
3933 Author: Keith Packard <keithp@keithp.com>
3934 Date: Tue Jun 23 22:40:11 2015 -0700
3936 altoslib: Fix replay to run in realtime again
3938 At some point, this got sped up to 10x normal speedx
3940 Signed-off-by: Keith Packard <keithp@keithp.com>
3942 commit 3e7588e382c70e467b1f328fcfb6bc38a6b79ac7
3943 Author: Keith Packard <keithp@keithp.com>
3944 Date: Tue Jun 23 22:22:06 2015 -0700
3946 Bump version to 1.6.0.3
3948 Mark the release of 1.6.0.3 altosdroid
3950 Signed-off-by: Keith Packard <keithp@keithp.com>
3952 commit 3ce5e24fefaddaa74eadba4722e904354c871387
3953 Author: Keith Packard <keithp@keithp.com>
3954 Date: Tue Jun 23 22:21:45 2015 -0700
3956 altosdroid: Update version numbers in manifest
3958 Signed-off-by: Keith Packard <keithp@keithp.com>
3960 commit d9f96c45d0a3099e9e5fd3c75cc27f9415fcaf55
3961 Author: Keith Packard <keithp@keithp.com>
3962 Date: Tue Jun 23 22:21:30 2015 -0700
3964 altosdroid: Mark tab-dependent voice output as done
3966 Signed-off-by: Keith Packard <keithp@keithp.com>
3968 commit aed8d3ee2561bbec59b9684fb2042186191302ca
3969 Author: Keith Packard <keithp@keithp.com>
3970 Date: Tue Jun 23 22:04:47 2015 -0700
3972 altosdroid: Make sure flight voice output always starts with 'speed'
3974 This resets the flight-mode voice output state back to start again
3975 each time the flight tab is selected
3977 Signed-off-by: Keith Packard <keithp@keithp.com>
3979 commit b1b41e0823a60769e7d2d806f4d97ae043d7dae3
3980 Author: Keith Packard <keithp@keithp.com>
3981 Date: Tue Jun 23 22:00:33 2015 -0700
3983 altosdroid: Make sure whole flight state is spoken even when no-one is moving
3985 This eliminates the case where much of the flight state wasn't
3986 reported if the tracker or receiver weren't moving.
3988 Signed-off-by: Keith Packard <keithp@keithp.com>
3990 commit f275e73f42e0aaf1760da99fb93c394320aafb84
3991 Author: Keith Packard <keithp@keithp.com>
3992 Date: Tue Jun 23 21:47:06 2015 -0700
3994 altoslib: Typo slipped into AltosState.java
3998 Signed-off-by: Keith Packard <keithp@keithp.com>
4000 commit bfa6cd8934b993bd4a67cfc7a4eeecf9b11915ef
4001 Author: Keith Packard <keithp@keithp.com>
4002 Date: Tue Jun 23 21:39:09 2015 -0700
4004 altosdroid: Change voice output around
4006 This makes the voice output depend on the current displayed tab; where
4007 the 'recovery' and 'map' tabs get the same value.
4011 Reports igniter and GPS status changes
4015 Report flight state changes and max height after apogee
4016 Report current speed, height and bearing/elevation/range once
4017 every 10 seconds while the rocket is in motion.
4021 Report distance and bearing when the location of either the
4022 tracker or the receiver changes by more than 10m, but not more
4023 than once every 10 seconds.
4025 Signed-off-by: Keith Packard <keithp@keithp.com>
4027 commit a761b34ed8fc64435f5a49623f4a5c55e2dda33a
4028 Author: Keith Packard <keithp@keithp.com>
4029 Date: Tue Jun 23 21:37:25 2015 -0700
4031 altosdroid: Define strings for the tab names
4033 Use these everywhere instead of replicating the same name; might
4036 Signed-off-by: Keith Packard <keithp@keithp.com>
4038 commit 56146cd379e1319b7adcf8e22cdda55f771e11be
4039 Author: Keith Packard <keithp@keithp.com>
4040 Date: Tue Jun 23 21:35:43 2015 -0700
4042 altosdroid: Show direction to target in recover tab
4044 This takes the bearing to target and current direction of motion (from
4045 the Android API) and computes a turn amount and displays that so you
4046 don't have to know which way is north when walking towards the rocket.
4048 Signed-off-by: Keith Packard <keithp@keithp.com>
4050 commit 60b8bea12edb954e6140a92c8412364c9581e3c2
4051 Author: Keith Packard <keithp@keithp.com>
4052 Date: Tue Jun 23 21:38:37 2015 -0700
4054 altoslib: Use a longer filter for descent values
4056 This makes descent speeds almost useful, a huge improvement
4058 Signed-off-by: Keith Packard <keithp@keithp.com>
4060 commit 1513693602c2a4cab0783833d1844c066edabb71
4061 Author: Keith Packard <keithp@keithp.com>
4062 Date: Mon Jun 22 23:21:05 2015 -0700
4064 altosdroid: Fix line drawing to old tracker location
4066 Selecting an old tracker would often fail to switch the bearing line
4067 as it was using the map data instead of just using the local data for
4068 the relavant tracker.
4070 Signed-off-by: Keith Packard <keithp@keithp.com>
4072 commit 87d2ab135b493486162d33ff172eba1f44dc0ce5
4073 Author: Keith Packard <keithp@keithp.com>
4074 Date: Mon Jun 22 21:04:01 2015 -0700
4076 altosdroid: Mark four-tab change done
4078 Signed-off-by: Keith Packard <keithp@keithp.com>
4080 commit fb0bd0ec18088ef01549cdb96243d591f618e32b
4081 Author: Keith Packard <keithp@keithp.com>
4082 Date: Mon Jun 22 20:59:17 2015 -0700
4084 altosdroid: Allow tracker selection from online map widget
4086 Need separate tracker selection code for online maps
4088 Signed-off-by: Keith Packard <keithp@keithp.com>
4090 commit 2b6768ed32d7be444c49caa40d30b520177bb22a
4091 Author: Keith Packard <keithp@keithp.com>
4092 Date: Mon Jun 22 20:43:23 2015 -0700
4094 altosdroid: Switch to four tabs (pad/flight/recover/map)
4096 Ascent and descent were almost the same; no reason to have both.
4098 Signed-off-by: Keith Packard <keithp@keithp.com>
4100 commit 0f56903774d9e8bb033dfc0af6945e8ddc1d3065
4101 Author: Keith Packard <keithp@keithp.com>
4102 Date: Mon Jun 22 20:08:05 2015 -0700
4104 altosdroid: Select tracker by clicking on map
4106 This lets you pick a tracker from the map, rather than having to use
4109 Signed-off-by: Keith Packard <keithp@keithp.com>
4111 commit a959c1926048d1b96a06aa291131afd7c8e771c7
4112 Author: Keith Packard <keithp@keithp.com>
4113 Date: Mon Jun 22 18:41:01 2015 -0700
4115 altosdroid: Get rid of on-line only maps tab
4117 The offline tab did both, so delete the online one and replace it with
4120 Signed-off-by: Keith Packard <keithp@keithp.com>
4122 commit 18fe64cf2648568dd0bde5acd7b627f1ddb6917e
4123 Author: Keith Packard <keithp@keithp.com>
4124 Date: Mon Jun 22 18:26:34 2015 -0700
4126 altosdroid: Display online/offline maps in same tab
4128 Make the map portion switchable between online and offline maps,
4129 leaving the rest of the tab alone.
4131 Signed-off-by: Keith Packard <keithp@keithp.com>
4133 commit ee656c9d41238ab2c56859a03fe6b8ce8ff2df4e
4134 Author: Keith Packard <keithp@keithp.com>
4135 Date: Sun Jun 21 10:34:00 2015 -0700
4137 altosdroid: Add map source preference
4141 Signed-off-by: Keith Packard <keithp@keithp.com>
4143 commit 9af72a2e629779833ff1787bbfc2ddc8b9d88bba
4144 Author: Keith Packard <keithp@keithp.com>
4145 Date: Sun Jun 21 09:37:05 2015 -0700
4147 altosdroid: Show receiver battery voltage in the 'pad' view
4149 Helpful to determine when the receiver battery is getting low
4151 Signed-off-by: Keith Packard <keithp@keithp.com>
4153 commit 4fbe9d5a1f56178a737ede6b31e8d01a02a7543f
4154 Author: Keith Packard <keithp@keithp.com>
4155 Date: Sun Jun 21 09:36:20 2015 -0700
4157 altosdroid: Use AltosMap set_zoom_centre
4159 This keeps the center of the zoom gesture pinned to the screen.
4161 Signed-off-by: Keith Packard <keithp@keithp.com>
4163 commit 08e4e291d32bdb3ac3271a85190d277b1874d277
4164 Author: Keith Packard <keithp@keithp.com>
4165 Date: Sun Jun 21 09:35:28 2015 -0700
4167 altosuilib: Use AltosMap set_zoom_centre instead of in-line version
4169 Shares the same function with altosdroid this way.
4171 Signed-off-by: Keith Packard <keithp@keithp.com>
4173 commit e0c318cdd32b3c3fed5099c754aea3ebc6186a0f
4174 Author: Keith Packard <keithp@keithp.com>
4175 Date: Sun Jun 21 09:34:29 2015 -0700
4177 altoslib: Add set_zoom_centre to AltosMap
4179 This zooms around a specific point, keeping it at the same place on
4182 Signed-off-by: Keith Packard <keithp@keithp.com>
4184 commit b8bdb432aacc1a273ee484a29a24b3768c274db6
4185 Author: Keith Packard <keithp@keithp.com>
4186 Date: Sat Jun 20 11:58:08 2015 -0700
4188 altosdroid: Multiple tracker support for google maps
4190 Signed-off-by: Keith Packard <keithp@keithp.com>
4192 commit c72e18fa1713b6e1aa7906210e79dd6354d2390f
4193 Author: Keith Packard <keithp@keithp.com>
4194 Date: Sat Jun 20 11:57:29 2015 -0700
4196 altosdroid: Stack map markers with newest rocket on top
4198 Signed-off-by: Keith Packard <keithp@keithp.com>
4200 commit 0f40284c554aaadc71a598de8f1c5fe64ea387e1
4201 Author: Keith Packard <keithp@keithp.com>
4202 Date: Sat Jun 20 11:58:45 2015 -0700
4204 altosdroid: Support for sorting rockets by age
4206 Now we can just sort rockets so that the top-most shown is the newest
4208 Signed-off-by: Keith Packard <keithp@keithp.com>
4210 commit de785b409e404a5296a7ff2037f52f3029536f28
4211 Author: Keith Packard <keithp@keithp.com>
4212 Date: Sat Jun 20 11:57:10 2015 -0700
4214 altosdroid: Remove debug
4216 Just noise at this point.
4218 Signed-off-by: Keith Packard <keithp@keithp.com>
4220 commit b2ad3b1ef59fe6e51c8c544f215c33f3b48c3aeb
4221 Author: Keith Packard <keithp@keithp.com>
4222 Date: Sat Jun 20 11:55:44 2015 -0700
4224 altosdroid: Switch trackers automatically when changing freq or baud
4226 This works by switching trackers when we receive telemetry newer than
4227 the last time we changed the frequency configuration.
4229 Signed-off-by: Keith Packard <keithp@keithp.com>
4231 commit 4a33336b8f468c5b0f2e14c0ee0242c9a24a8b90
4232 Author: Keith Packard <keithp@keithp.com>
4233 Date: Sat Jun 20 11:54:20 2015 -0700
4235 altosuilib: Allow for no transform in map mouse wheel function
4237 Signed-off-by: Keith Packard <keithp@keithp.com>
4239 commit 3882e358b6f2970cb1afebcf2a71da34a57002df
4240 Author: Keith Packard <keithp@keithp.com>
4241 Date: Sat Jun 20 11:53:24 2015 -0700
4243 altoslib: Clean up map tile removal
4245 Remove them while walking the hash table, rather than creating a list
4248 Signed-off-by: Keith Packard <keithp@keithp.com>
4250 commit 0cc03210d5d53d12604688f294b6ca39e3a025de
4251 Author: Keith Packard <keithp@keithp.com>
4252 Date: Sat Jun 20 09:35:26 2015 -0700
4254 altoslib/altosuilib: Fix equals methods, add hashCode
4256 Whenever we use a class as a HashMap key, that class needs to override
4257 the equals(Object) and hashCode() methods. Otherwise, the hash table
4260 Signed-off-by: Keith Packard <keithp@keithp.com>
4262 commit 5568c30f0a4fe346b8ed58934c23653064427d65
4263 Author: Keith Packard <keithp@aimi.keithp.com>
4264 Date: Thu Jun 18 17:37:35 2015 -0700
4266 ao-bringup: Make turnon_easymega run without 'make install'
4268 Use relative paths for all altos tools
4270 Signed-off-by: Keith Packard <keithp@aimi.keithp.com>
4272 commit 6cf27ddd5e84824610d6a0bcbb81ba4626b71409
4273 Author: Keith Packard <keithp@keithp.com>
4274 Date: Thu Jun 18 17:12:41 2015 -0700
4276 ao-bringup: Use local versions of tools instead of /usr/bin for turnon_easymega
4278 Signed-off-by: Keith Packard <keithp@keithp.com>
4280 commit 3e5521070564e9a184f3b781dad9d39cdd963510
4281 Author: Keith Packard <keithp@keithp.com>
4282 Date: Thu Jun 18 16:56:19 2015 -0700
4284 ao-bringup: Fail turnon_easymega if accel cal fails
4286 This prevents a failing board from being reported as good
4288 Signed-off-by: Keith Packard <keithp@keithp.com>
4290 commit 6683146168216aacdc0842934cec1fb48ea03518
4291 Author: Keith Packard <keithp@keithp.com>
4292 Date: Wed Jun 17 00:12:06 2015 -0700
4294 telegps: use new AltosUIFrame constraint helper
4296 Signed-off-by: Keith Packard <keithp@keithp.com>
4298 commit c71abc5c29025eb57fc78968a4ccf8c34cb3a6f2
4299 Author: Keith Packard <keithp@keithp.com>
4300 Date: Tue Jun 16 23:49:45 2015 -0700
4302 micropeak: Update mac/windows FTDI drivers
4304 Use latest FTDI drivers.
4306 Signed-off-by: Keith Packard <keithp@keithp.com>
4308 commit 1098f7502a603a9cf80ad950f53a2c2abdf7ec93
4309 Author: Keith Packard <keithp@keithp.com>
4310 Date: Tue Jun 16 23:43:53 2015 -0700
4312 altosuilib: Create grid-bag helper functions in AltosUIFrame
4314 This eases the burden of creating suitable GridBagConstraints values
4316 Signed-off-by: Keith Packard <keithp@keithp.com>
4318 commit cdeefaba7d5ef69f28e5dfb152c5f185f8b85f2e
4319 Author: Keith Packard <keithp@keithp.com>
4320 Date: Tue Jun 16 23:42:59 2015 -0700
4322 altosuilib: Show state.product if state.device_type isn't set
4324 MonitorIdle doesn't get the device type, only the product.
4326 Signed-off-by: Keith Packard <keithp@keithp.com>
4328 commit 469be0a57dc9932c26f9c38986d22f6e8b2fd6ed
4329 Author: Keith Packard <keithp@keithp.com>
4330 Date: Tue Jun 16 23:42:22 2015 -0700
4332 altoslib: Remove debug output from AltosMap
4334 It's just annoying now.
4336 Signed-off-by: Keith Packard <keithp@keithp.com>
4338 commit 76532162d63239b00a51dd0ff6b1356b07b62d2d
4339 Author: Keith Packard <keithp@keithp.com>
4340 Date: Tue Jun 16 23:41:51 2015 -0700
4342 altoslib: Expose public function to set state.product
4344 Just adds a setter function for this value.
4346 Signed-off-by: Keith Packard <keithp@keithp.com>
4348 commit 5cacce8099bfc4fa4019538ac88be00bd2023865
4349 Author: Keith Packard <keithp@keithp.com>
4350 Date: Tue Jun 16 23:40:34 2015 -0700
4352 altoslib: Let the application disable the link cancel dialog
4354 This lets the application control whether to pop up the cancel dialog
4355 when the link isn't working.
4357 Signed-off-by: Keith Packard <keithp@keithp.com>
4359 commit 75682a5a18f28acf8f4a61a0d45dad461218186e
4360 Author: Keith Packard <keithp@keithp.com>
4361 Date: Tue Jun 16 23:38:07 2015 -0700
4363 altoslib: Set product for idle monitor
4365 This lets the UI show the product name
4367 Signed-off-by: Keith Packard <keithp@keithp.com>
4369 commit c46c2c5767c6e909fa58587e6c864a4fbaa9fa20
4370 Merge: 39f4361 6cb7d76
4371 Author: Robert Garbee <robert@gag.com>
4372 Date: Sat Jun 13 17:40:59 2015 -0600
4374 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
4376 commit 39f4361675aa13899864f427a33d4aa48be56cd2
4377 Author: Robert Garbee <robert@gag.com>
4378 Date: Sat Jun 13 17:40:16 2015 -0600
4380 add beep when test completes
4382 commit 6cb7d76c3fbe32b442713e358654d07b2506897e
4383 Author: Keith Packard <keithp@keithp.com>
4384 Date: Sat Jun 6 20:37:53 2015 -0700
4386 altosdroid: Resource changes needed for multi-tracker mode
4388 Signed-off-by: Keith Packard <keithp@keithp.com>
4390 commit 78df1d5213c402780fa2ce7e062c64cf5a01c45f
4391 Author: Keith Packard <keithp@keithp.com>
4392 Date: Sat Jun 6 20:37:27 2015 -0700
4394 altosdroid: Note recent changes
4396 Signed-off-by: Keith Packard <keithp@keithp.com>
4398 commit c813c2c8f71017a686128e06b5178fc99ece251c
4399 Author: Keith Packard <keithp@keithp.com>
4400 Date: Sat Jun 6 20:36:18 2015 -0700
4402 altosdroid: Add multi-tracker support
4404 This lets you view multiple trackers in the offline maps tab (online
4405 maps not done yet), saves state of each tracker to preferences.
4407 Signed-off-by: Keith Packard <keithp@keithp.com>
4409 commit f79d569dfe333621d63a1d4001c85a88f736ad58
4410 Author: Keith Packard <keithp@keithp.com>
4411 Date: Sat Jun 6 20:35:32 2015 -0700
4413 altoslib: Add preferences for saving/restoring multiple flight states
4415 Signed-off-by: Keith Packard <keithp@keithp.com>
4417 commit 64ca3d2e7d2b23aedfdf98ef8ebd760bd3291534
4418 Author: Keith Packard <keithp@keithp.com>
4419 Date: Sat Jun 6 06:00:43 2015 -0700
4421 ao-tools: Add missing ao-cal-freq man page
4423 Signed-off-by: Keith Packard <keithp@keithp.com>
4425 commit 55753ac8b4b73ec58cb6ef874acc8d606193c5e7
4426 Author: Keith Packard <keithp@keithp.com>
4427 Date: Fri Jun 5 22:52:51 2015 -0700
4429 ao-bringup: Do telegps freq cal before testing GPS
4431 This lets the GPS get some time to see sats while we're messing with
4432 the radio frequency calibration.
4434 Signed-off-by: Keith Packard <keithp@keithp.com>
4436 commit 527700623cc369cc58e15c29dc1ee374fa4efeb7
4437 Author: Keith Packard <keithp@keithp.com>
4438 Date: Fri Jun 5 22:52:21 2015 -0700
4440 ao-bringup: Use new ao-cal-freq program for cal-freq script
4442 Remove shell script bits that were unreliable.
4444 Signed-off-by: Keith Packard <keithp@keithp.com>
4446 commit b9797aa9b6ca38db79c22e4dcefc6efc8a148599
4447 Author: Keith Packard <keithp@keithp.com>
4448 Date: Fri Jun 5 22:17:02 2015 -0700
4450 ao-tools: Create ao-cal-freq
4452 Create C-based frequency calibration program to replace shell script
4453 which isn't reliable.
4455 Signed-off-by: Keith Packard <keithp@keithp.com>
4457 commit 7c75ec6e11a9287b2360bb62ef4ddb4f0e2083c7
4458 Author: Keith Packard <keithp@keithp.com>
4459 Date: Tue Jun 2 12:48:42 2015 -0700
4461 altosdroid: Highlight age in red when older than 10 seconds
4463 This lets you quickly identify stale data
4465 Signed-off-by: Keith Packard <keithp@keithp.com>
4467 commit a533ea525620f194fd89fedad043659bb433d71b
4468 Author: Keith Packard <keithp@keithp.com>
4469 Date: Sun May 31 23:09:18 2015 -0700
4471 altosdroid: Switch from custom title to standard Holo theme
4473 This gives us the menu button, which is awfully useful on devices
4474 without a hardware version...
4476 Signed-off-by: Keith Packard <keithp@keithp.com>
4478 commit 0beb02f1848e34892cca6e34ba83d6ca836d6df2
4479 Author: Keith Packard <keithp@keithp.com>
4480 Date: Fri May 29 09:49:30 2015 -0700
4482 altoslib: Require 'debug' hook in AltosMapInterface
4484 This lets the map users redirect debug messages as appropriate
4486 Signed-off-by: Keith Packard <keithp@keithp.com>
4488 commit 4f1c4dddbce7b4e8673173f1690f79ba60e72ba2
4489 Author: Keith Packard <keithp@keithp.com>
4490 Date: Fri May 29 09:43:58 2015 -0700
4492 altosdroid: use 'show' to set new tab contents in onResume
4494 Hook onResume so that newly created/recreated tabs get current
4495 contents. The set_visible hook isn't sufficient for that.
4497 Signed-off-by: Keith Packard <keithp@keithp.com>
4499 commit 625c496987c2d320a51f3d27f8f00bde17b46a78
4500 Author: Keith Packard <keithp@keithp.com>
4501 Date: Fri May 29 09:42:58 2015 -0700
4503 altosdroid: Missing call to super.onDetach from TabMapOffline
4505 Causes an exception when you shut down the application.
4507 Signed-off-by: Keith Packard <keithp@keithp.com>
4509 commit 50e709a4088f3d6846fd66cbe9b8c437b3f9c88b
4510 Author: Keith Packard <keithp@keithp.com>
4511 Date: Thu May 28 22:13:39 2015 -0700
4513 altosdroid: Split out AltosMapView into separate file
4515 This lets us use the regular layout configuration bits in the .xml
4516 file instead of needing to patch the map object into the display. That
4517 was causing problems when re-entering the map tab as the map view
4518 would somehow end up with a zero width.
4520 Signed-off-by: Keith Packard <keithp@keithp.com>
4522 commit 2e424f8dc2886aa475e6ddb21457eba08f768b16
4523 Author: Keith Packard <keithp@keithp.com>
4524 Date: Thu May 28 22:12:26 2015 -0700
4526 altosdroid: Add 'Current Location' as an option when preloading maps
4528 This lets you load maps around your current location, in case your
4529 favorite launch site isn't in the list.
4531 Signed-off-by: Keith Packard <keithp@keithp.com>
4533 commit 4315b91d7afc2391e3f7444906ac226500bf1345
4534 Author: Keith Packard <keithp@keithp.com>
4535 Date: Thu May 28 22:08:51 2015 -0700
4537 altosdroid: Save selected map type in AltosDroid object
4539 The map tabs may not have been created when the map type was selected,
4540 so save the desired type in the main application object.
4542 Signed-off-by: Keith Packard <keithp@keithp.com>
4544 commit 41028472fd2e7e0209125e76b94e551f9d10f89c
4545 Author: Keith Packard <keithp@keithp.com>
4546 Date: Thu May 28 22:06:55 2015 -0700
4548 altosdroid: Disable debug output on release builds
4550 We generate an awful lot of debug spew to the log; presumably that's
4551 not helping performance, so lose that for release builds.
4553 Signed-off-by: Keith Packard <keithp@keithp.com>
4555 commit e2d54de24df37baa5ff3837334d97f726934ec25
4556 Author: Keith Packard <keithp@keithp.com>
4557 Date: Thu May 28 22:05:36 2015 -0700
4559 altosdroid: Look for zipalign in the new place too
4561 This build tool moved for some reason...
4563 Signed-off-by: Keith Packard <keithp@keithp.com>
4565 commit 85013045ca505096064aaf45c312b158d0263d2a
4566 Author: Keith Packard <keithp@keithp.com>
4567 Date: Thu May 28 01:05:18 2015 -0700
4569 altosdroid: Add map types and map preloading UIs
4571 This adds an ugly dialog to select which maps to preload, and also
4572 adds the ability to display other map types.
4574 Signed-off-by: Keith Packard <keithp@keithp.com>
4576 commit ba698c2cc48677735046d0881df9c180674e4082
4577 Author: Keith Packard <keithp@keithp.com>
4578 Date: Thu May 28 01:01:23 2015 -0700
4580 altoslib: Pass all map loader params to set_load_params
4582 Add zoom and map type to the param list so we don't call set_zoom and
4583 set_maptype separately, which only causes lots of extra image loads to
4584 get started unnecessarily.
4586 Signed-off-by: Keith Packard <keithp@keithp.com>
4588 commit c63617415553d97f9be2f19b94365b53d4480c68
4589 Author: Keith Packard <keithp@keithp.com>
4590 Date: Thu May 28 01:00:47 2015 -0700
4592 altosuilib: Eliminate extra MapCache in AltosUIMapPreloadNew
4594 Use the cache from the map.
4596 Signed-off-by: Keith Packard <keithp@keithp.com>
4598 commit ff01fb7275973cdbfd976d3b4e638c6235108121
4599 Author: Keith Packard <keithp@keithp.com>
4600 Date: Thu May 28 01:00:22 2015 -0700
4602 altosuilib: Get rid of AltosUIMapNew.set_load_params
4604 This isn't needed anywhere.
4606 Signed-off-by: Keith Packard <keithp@keithp.com>
4608 commit b49b74847ad55e14d1dbf2872ebbe313147e9fd3
4609 Author: Keith Packard <keithp@keithp.com>
4610 Date: Wed May 27 23:14:09 2015 -0700
4612 altosuilib: Switch to altoslib map loading code
4614 Remove the map loading code from the UI bits and use the new altoslib
4617 Signed-off-by: Keith Packard <keithp@keithp.com>
4619 commit 3b4e6da65158a434905dc652e46c69d2c38cea7f
4620 Author: Keith Packard <keithp@keithp.com>
4621 Date: Wed May 27 23:12:34 2015 -0700
4623 altoslib: Add map loading helper class
4625 This adds the AltosMapLoader class, which iterates over a sequence of
4626 zoom levels and formats to get local copies of a desired launch site.
4628 Signed-off-by: Keith Packard <keithp@keithp.com>
4630 commit ccd557c846eed37328d6799f36e61308bcbb678a
4631 Author: Keith Packard <keithp@keithp.com>
4632 Date: Wed May 27 23:11:58 2015 -0700
4634 altoslib: Provide toString method for AltosLatLon
4636 Makes printing them easier.
4638 Signed-off-by: Keith Packard <keithp@keithp.com>
4640 commit 756f501593365b80cfa6f7ca871da3291bbde67a
4641 Author: Keith Packard <keithp@keithp.com>
4642 Date: Wed May 27 22:43:53 2015 -0700
4644 altoslib: Start with map empty
4646 Don't load images from 0,0 for no good reason; wait until someone sets
4649 Signed-off-by: Keith Packard <keithp@keithp.com>
4651 commit ccba2bb2f193ffd6c3a3d934a46bc06466b4b258
4652 Author: Keith Packard <keithp@keithp.com>
4653 Date: Wed May 27 15:31:25 2015 -0700
4655 altosuilib: Use altoslib site list loader
4657 Removes the custom version and uses the shared code
4659 Signed-off-by: Keith Packard <keithp@keithp.com>
4661 commit 519d477cb752d9cdba78a4daa32b1f547bf889b4
4662 Author: Keith Packard <keithp@keithp.com>
4663 Date: Wed May 27 15:30:29 2015 -0700
4665 altoslib: Add AltosLaunchSite bits
4667 This asynchronously fetches the list of available launch sites from
4668 the standard location and notifies the caller when finished.
4670 Signed-off-by: Keith Packard <keithp@keithp.com>
4672 commit 103a50db50be55c2293468d273dd94472dd89d94
4673 Author: Keith Packard <keithp@keithp.com>
4674 Date: Tue May 26 23:05:49 2015 -0700
4676 altosdroid: Place icons on screen instead of drawing path
4678 This makes drawing a bunch faster, and locating stuff on the screen easier.
4680 Signed-off-by: Keith Packard <keithp@keithp.com>
4682 commit 2509b664df6a13e6ae9e6753dc9fa0d696a4f6c7
4683 Author: Keith Packard <keithp@keithp.com>
4684 Date: Tue May 26 23:05:11 2015 -0700
4686 altosdroid: Centralize debug printf code
4688 Create AltosDebug to hold the debug code, use it everywhere.
4690 Signed-off-by: Keith Packard <keithp@keithp.com>
4692 commit bca342577740a9d04b8419ecadcff582e77f1e61
4693 Author: Keith Packard <keithp@keithp.com>
4694 Date: Tue May 26 23:02:43 2015 -0700
4696 altosdroid: Move pause before reopening bluetooth into connec thread
4698 This avoids stalling the UI while waiting for TBT to boot.
4700 Signed-off-by: Keith Packard <keithp@keithp.com>
4702 commit 7975d088a4ac44c0943134fa41d0e3b88f50b98f
4703 Author: Keith Packard <keithp@keithp.com>
4704 Date: Tue May 26 19:47:04 2015 -0700
4706 altosdroid: Add offline map tab
4708 It's not very fancy yet, but it does zoom and pan, and show the path
4709 of the rocket with a line.
4711 Signed-off-by: Keith Packard <keithp@keithp.com>
4713 commit f822b84d8c25159ff113fef6a419b6e18e87a87a
4714 Author: Keith Packard <keithp@keithp.com>
4715 Date: Tue May 26 01:04:00 2015 -0700
4717 altosuilib: Get rid of AltosUIVersion.java
4719 It's been moved to altoslib/AltosVersion.java
4721 Signed-off-by: Keith Packard <keithp@keithp.com>
4723 commit 4895f443e4a748de2677e51869f20c05d265c944
4724 Author: Keith Packard <keithp@keithp.com>
4725 Date: Tue May 26 00:56:17 2015 -0700
4727 altosuilib: Remove old map bits
4729 Signed-off-by: Keith Packard <keithp@keithp.com>
4731 commit f41fe2291891b28327c332098bdc601bc75fc4c0
4732 Author: Keith Packard <keithp@keithp.com>
4733 Date: Tue May 26 00:46:21 2015 -0700
4735 altosuilib: Use new map code for map preload UI
4737 Signed-off-by: Keith Packard <keithp@keithp.com>
4739 commit cd0f4de98ea709e5f070d5f1337658590d2004a1
4740 Author: Keith Packard <keithp@keithp.com>
4741 Date: Tue May 26 00:33:02 2015 -0700
4743 altosuilib: Add AltosUIImage.java
4745 Signed-off-by: Keith Packard <keithp@keithp.com>
4747 commit 501fa41111b93cc213a1114a33612858e1e93ab5
4748 Author: Keith Packard <keithp@keithp.com>
4749 Date: Tue May 26 00:29:53 2015 -0700
4751 altoslib/altosuilib: Get new Map display code running in altosui and telegps
4753 Looks like the display is all hooked up. Still need to replace the
4756 Signed-off-by: Keith Packard <keithp@keithp.com>
4758 commit cb23b992be8ba40c97d8988c134a814a13ccd58c
4759 Author: Keith Packard <keithp@keithp.com>
4760 Date: Mon May 25 20:34:05 2015 -0700
4762 altoslib/altosuilib: Update library version to 7
4764 So many ABI/API changes
4766 Signed-off-by: Keith Packard <keithp@keithp.com>
4768 commit 68effc6e39f731a2d7bbe2963999c1e785118897
4769 Author: Keith Packard <keithp@keithp.com>
4770 Date: Mon May 25 20:33:28 2015 -0700
4772 altoslib: More frobbing with new map bits
4774 Signed-off-by: Keith Packard <keithp@keithp.com>
4776 commit 00aca369c4070901e0400f291d5f269b5fb8015c
4777 Author: Keith Packard <keithp@keithp.com>
4778 Date: Mon May 25 20:10:37 2015 -0700
4780 altoslib: Get new abstract mapping code compiling
4782 Not useful yet, but at least it compiles now?
4784 Signed-off-by: Keith Packard <keithp@keithp.com>
4786 commit 6ca2c42061b3c0160bf0137c9cd65989c522b826
4787 Author: Keith Packard <keithp@keithp.com>
4788 Date: Mon May 25 16:35:23 2015 -0700
4790 altoslib: Build AltosVersion.java in configure.ac
4792 Signed-off-by: Keith Packard <keithp@keithp.com>
4794 commit dcbd87bc685924a6587a5f4dae47d34f417601b0
4795 Author: Keith Packard <keithp@keithp.com>
4796 Date: Mon May 25 16:26:01 2015 -0700
4798 altos/telelco: Show box voltage with pad knob instead of firing button
4800 Turn left past '1' and see the firing box battery voltage instead of
4801 pushing the firing button with the box disarmed. This seems like a
4804 Signed-off-by: Keith Packard <keithp@keithp.com>
4806 commit 91f617d450c187500593d1ae785958187f68ca14
4807 Author: Keith Packard <keithp@keithp.com>
4808 Date: Mon May 25 15:49:21 2015 -0700
4810 altos/telelco: Display telefire battery voltage
4812 When the firing button is pressed while unarmed, show the telefire
4813 battery voltage in the display.
4815 Signed-off-by: Keith Packard <keithp@keithp.com>
4817 commit a54aac3361b7bd18f111e5ba06fb89015504b8a4
4818 Author: Keith Packard <keithp@keithp.com>
4819 Date: Mon May 25 15:47:46 2015 -0700
4821 altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)
4823 Signed-off-by: Keith Packard <keithp@keithp.com>
4825 commit 9b268351aee44de959dcc4c792189c10a00428fe
4826 Author: Keith Packard <keithp@keithp.com>
4827 Date: Mon May 25 13:23:54 2015 -0700
4829 telefire: Report telefire battery voltage over telemetry link
4831 Signed-off-by: Keith Packard <keithp@keithp.com>
4833 commit 0e76cb2a7d5db24b6cecdccb6fb8d5bf5527fadf
4834 Author: Keith Packard <keithp@keithp.com>
4835 Date: Sun May 24 17:28:07 2015 -0700
4837 altos: Only set CMAC RSSI value on valid packet received
4839 This ignores spurious packets for the purpose of showing the RSSI
4840 value in telelco/telefire, avoiding warning about 'low RSSI' when the
4841 radio receives noise.
4843 Signed-off-by: Keith Packard <keithp@keithp.com>
4845 commit e7c25e3ba04b1e9f8e6fa31e2d464fe96a074dad
4846 Author: Keith Packard <keithp@keithp.com>
4847 Date: Sun May 24 17:25:25 2015 -0700
4849 telefire: Make 'good' RSSI value configurable
4851 Different radios will have different 'good' RSSI values, so let each
4852 product configure it, leaving the default set to -90dBm, which is
4853 a solid signal value for the CC1111.
4855 Signed-off-by: Keith Packard <keithp@keithp.com>
4857 commit 29edc37a8de56cb6eb028e3bf3f56aa70f109eba
4858 Author: Keith Packard <keithp@keithp.com>
4859 Date: Thu May 21 13:49:28 2015 -0700
4861 altoslib: Create display-independent map support code
4863 This takes the swing-specific map code and creates a generic version.
4865 Signed-off-by: Keith Packard <keithp@keithp.com>
4867 commit 59a28811cb19d315b483df296145a2769c445f80
4868 Author: Keith Packard <keithp@keithp.com>
4869 Date: Tue May 19 10:25:05 2015 -0700
4871 Flip version to 1.6.0.2
4873 Tag a version for development builds
4875 Signed-off-by: Keith Packard <keithp@keithp.com>
4877 commit f3ddaae82215e365726f2a62a3dc46bfb29eb1b5
4878 Author: Keith Packard <keithp@keithp.com>
4879 Date: Tue May 19 10:23:09 2015 -0700
4881 micropeak: Use fast load mode by default in -load script
4883 Speed up flashing in default config
4885 Signed-off-by: Keith Packard <keithp@keithp.com>
4887 commit eac71f2b871357ff69581c713059a3741a82a932
4888 Author: Keith Packard <keithp@keithp.com>
4889 Date: Tue May 19 10:22:10 2015 -0700
4891 microsplash: Add 'publish' target to Makefile
4893 This dumps the resulting binary and -load script into the Binaries
4894 directory of the altusmetrumllc repo
4896 Signed-off-by: Keith Packard <keithp@keithp.com>
4898 commit dba00b3d9102db99592f5822a703e64d98ace8bb
4899 Author: Keith Packard <keithp@keithp.com>
4900 Date: Tue May 19 10:17:01 2015 -0700
4902 altos: Support 32MHz xtal on cc1200
4904 I ended up building some cc1200-based boards with 32MHz xtals, so just
4905 make this an option when building the driver.
4907 Signed-off-by: Keith Packard <keithp@keithp.com>
4909 commit fcb523cd083503591fa1277648e5deb258bbbaf4
4910 Author: Keith Packard <keithp@keithp.com>
4911 Date: Tue May 19 10:16:10 2015 -0700
4913 doc: Clarify what 'after motor' means
4915 Note that this means after motor burn-out, not after motor start.
4917 Signed-off-by: Keith Packard <keithp@keithp.com>
4919 commit b67e6ae8ce34ef119da96b442776bb3d78b4f874
4920 Author: Keith Packard <keithp@keithp.com>
4921 Date: Tue May 19 10:14:43 2015 -0700
4923 ao-dump-up: Add --wait option to make testing µPusb easier
4925 The --wait option hangs around until a suitable device appears, so
4926 that you can test a pile of µPusb devices without needing to
4927 constantly interact with the command line.
4929 Signed-off-by: Keith Packard <keithp@keithp.com>
4931 commit 2b57158737f85c7009658b3e923c66794f01bbdf
4932 Author: Keith Packard <keithp@keithp.com>
4933 Date: Tue May 19 10:12:52 2015 -0700
4935 altosui: Remove un-implemented --fetchmaps argument
4937 This has been stubbed out for a while, so just remove it.
4939 Signed-off-by: Keith Packard <keithp@keithp.com>
4941 commit 3e5e9333420ede74d998556c1bbd5888e8ff75ae
4942 Author: Keith Packard <keithp@keithp.com>
4943 Date: Tue May 19 10:09:22 2015 -0700
4945 altoslib: Expose locale and non-locale floating point parsing functions
4947 UI bits use locale-specific floating point formats, so parsing those
4948 needs to use the locale. Network-based data, like .kml bits need to
4949 use non-locale-specific parsing code, so now we've got both APIs
4950 available, and each used as appropriate.
4952 Signed-off-by: Keith Packard <keithp@keithp.com>
4954 commit 3fbf0a29a1b8a67b90ef965ee3e2e972c0ec33a1
4955 Author: Keith Packard <keithp@keithp.com>
4956 Date: Mon May 18 10:52:24 2015 -0700
4958 altoslib: Use Locale.ROOT for KML export
4960 This avoids locale-specific number formatting, which breaks
4961 googleearth when importing the resulting file.
4963 Signed-off-by: Keith Packard <keithp@keithp.com>
4965 commit 1cc1900e13d79e0451587439c23bbb062d86cee3
4966 Author: Keith Packard <keithp@keithp.com>
4967 Date: Mon Apr 27 22:29:45 2015 -0700
4969 altosdroid: Fix tab label height problems
4971 With a newer android API versions, we can set the indicator to a View
4972 instead of just a string. This lets us wrap the desired string in a
4973 TextView and show just that for the indicator, making it exactly the
4976 Signed-off-by: Keith Packard <keithp@keithp.com>
4978 commit 7bfa8841b65707d629b425b306ec4cc3acfc156c
4979 Author: Keith Packard <keithp@keithp.com>
4980 Date: Mon Apr 27 21:20:22 2015 -0700
4982 altosdroid: Add USB support for TeleDongle/TeleBT
4984 This lets AltosDroid use a USB-connected receiver as well as Bluetooth devices.
4986 Signed-off-by: Keith Packard <keithp@keithp.com>
4988 commit 356617a3476e237311b8bbcefd6beda8271b120d
4989 Author: Keith Packard <keithp@keithp.com>
4990 Date: Sun Mar 29 12:10:47 2015 -0700
4992 windows: Use new windows stub to launch applications
4994 This avoids needing to locate javaw on the system while also making
4995 the registry entries less fragile.
4997 Signed-off-by: Keith Packard <keithp@keithp.com>
4999 commit fe76229618643f0af7eae965e7a8fc6c70410d27
5000 Author: Keith Packard <keithp@keithp.com>
5001 Date: Sun Mar 29 12:08:42 2015 -0700
5003 icon: Convert windows stub into launcher program
5005 Instead of an empty windows stub that exists only to hold icons, add
5006 useful code that allows it to find and run the related java
5007 application. This also adds more resources to that application to
5008 provide more information to Windows too.
5010 Signed-off-by: Keith Packard <keithp@keithp.com>
5012 commit b1b69c8b73cbffb56c688f6a968d144b642cdff2
5013 Author: Keith Packard <keithp@keithp.com>
5014 Date: Fri Mar 20 15:09:20 2015 -0700
5016 altos/stmf0: Have fast ADC ring buffer code use wrap-around
5018 Instead of requiring that the whole set of returned values fit
5019 precisely in the ring, allow for wrap-around so that we can fetch an
5020 odd number of ADC values. The previous version required that the fetch
5021 amount always be a factor of the ADC buffer size.
5023 Signed-off-by: Keith Packard <keithp@keithp.com>
5025 commit 43b4044dc71d44cb25be6397b4d66fd792580eed
5026 Author: Keith Packard <keithp@keithp.com>
5027 Date: Thu Mar 19 01:12:24 2015 -0700
5029 altos/chaoskey: Set USB VID/PID to 0x1d50/0x60c6
5031 These are allocated from the OpenMoko USB vendor ID page and offer a
5032 more 'official' number than from using the 0xfffe space.
5034 Signed-off-by: Keith Packard <keithp@keithp.com>
5036 commit c3321bd9f73c89686fe983a8d99f4e54fa91550e
5037 Author: Keith Packard <keithp@keithp.com>
5038 Date: Thu Mar 19 01:11:33 2015 -0700
5040 altos: Add the ability to configure a different USB vendor ID
5042 ChaosKey will use an OpenMoko vid/pid, so we need the ability to
5043 configure a different USB vendor ID for each product.
5045 Signed-off-by: Keith Packard <keithp@keithp.com>
5047 commit fce4e6926de7cb5ef6ea64a8db134c442b86153b
5048 Author: Keith Packard <keithp@keithp.com>
5049 Date: Tue Mar 10 09:35:02 2015 -0600
5051 ao-tools/ao-list: Show devices that have no TTY
5053 chaoskey doesn't advertise itself as a modem, so the kernel doesn't
5054 allocate a tty device.
5056 Signed-off-by: Keith Packard <keithp@keithp.com>
5058 commit ce99807ef942de54a3f934d321baf3c3d26442bb
5059 Author: Keith Packard <keithp@keithp.com>
5060 Date: Tue Mar 10 09:34:01 2015 -0600
5062 altos/test: Support old telemega eeprom file formats in ao_flight_test
5064 The old eeprom format used different stoarge for the accel calibration
5065 data, which doesn't matter to this code, but the change in the format
5068 Signed-off-by: Keith Packard <keithp@keithp.com>
5070 commit f92be7e22150b2de4c899e687d3bbfc1eb842f9e
5071 Author: Keith Packard <keithp@keithp.com>
5072 Date: Tue Mar 10 09:32:20 2015 -0600
5074 altos/test: Make aprs test code compile again
5076 Adding the compressed/uncompressed config option broke the APRS test harness.
5078 Signed-off-by: Keith Packard <keithp@keithp.com>
5080 commit 46f2a759dc21ebf3a7bf7e0566903fc1e7364719
5081 Author: Keith Packard <keithp@keithp.com>
5082 Date: Tue Mar 10 09:30:53 2015 -0600
5084 ao-tools/ao-mega: Clean up formatting of pyro status messages
5086 There was an extra newline and missing space.
5088 Signed-off-by: Keith Packard <keithp@keithp.com>
5090 commit 2c4ebe9b4b392531cd1a5bbafc4ddc38a9391af5
5091 Author: Keith Packard <keithp@keithp.com>
5092 Date: Tue Mar 10 09:29:52 2015 -0600
5094 altosui: Add map to MonitorIdle display
5096 Nice to be able to verify that maps are working by using this mode,
5097 instead of needing to use flight monitoring.
5099 Signed-off-by: Keith Packard <keithp@keithp.com>
5101 commit dec8de9c642fea1df924a667a4779a6c6c8c3453
5102 Author: Keith Packard <keithp@keithp.com>
5103 Date: Sat Mar 7 16:53:58 2015 -0800
5105 altos/stmf0: Need ao_exti.h for pin configuration
5107 Flash loader uses pin configuration to set up GPIOs for boot selection
5109 Signed-off-by: Keith Packard <keithp@keithp.com>
5111 commit 4e53a5da5a8921829a3bb290e7c051950a66ab75
5112 Author: Keith Packard <keithp@keithp.com>
5113 Date: Sat Mar 7 16:40:30 2015 -0800
5115 altos: Add makefile for chaoskey flash loader
5117 Signed-off-by: Keith Packard <keithp@keithp.com>
5119 commit 601f33f5e2f833fed9ab10b24a9df91905d7f766
5120 Author: Keith Packard <keithp@keithp.com>
5121 Date: Sat Mar 7 12:38:08 2015 -0800
5123 altos: Build chaoskey by default
5125 Signed-off-by: Keith Packard <keithp@keithp.com>
5127 commit f3406f38d71d0c9b55c9a3ae2356a778328509a9
5128 Author: Keith Packard <keithp@keithp.com>
5129 Date: Sat Mar 7 12:36:57 2015 -0800
5131 altos: Add .gitignore for chaoskey
5133 Signed-off-by: Keith Packard <keithp@keithp.com>
5135 commit 4862bec43b29264c361950700f935604f41b840b
5136 Author: Keith Packard <keithp@keithp.com>
5137 Date: Sat Mar 7 12:33:36 2015 -0800
5139 doc: Update telemetry docs to include new packet formats
5141 Add TeleMega TeleMetrum v2 and companion data packet formats.
5143 List which radio parts each product uses.
5145 Document modulation parameters for new data rates.
5147 Signed-off-by: Keith Packard <keithp@keithp.com>
5149 commit cdd7ad469728fde178c69b9c99d70d6e0ab3f12d
5150 Author: Keith Packard <keithp@keithp.com>
5151 Date: Sat Mar 7 10:18:57 2015 -0800
5153 altosdroid: Deal with bluetooth connection failures better
5155 Remember when we've closed the bluetooth connection so that we stop
5156 operations, including reporting connection status messages or even
5157 starting a connection attempt.
5159 Pass the AltosBluetooth object back in connection status messages so
5160 that TelemetryService can tell when messages from closed objects get
5161 delivered. There's a queue between the two, so the above fix catches
5162 most of these instances, but not all of them.
5164 Stick a delay during reconnect -- if the TeleBT device is getting
5165 power-cycled, it will need a few seconds to reconfigure the device at
5166 startup, if AltosDroid manages to connect during that time, the
5167 configuration commands will be ignored.
5169 Unlock the AltosBluetooth device while we connect so that cancel
5170 calls will actually work.
5172 Signed-off-by: Keith Packard <keithp@keithp.com>
5174 commit d446c90dab0aca7e501a0228f24c210758d84a1d
5175 Author: Keith Packard <keithp@keithp.com>
5176 Date: Mon Mar 2 22:23:22 2015 -0800
5178 altosui/telegps: Change from variable-units snuck into master
5180 show_units_name(double) only exists on the variable-units branch...
5182 Signed-off-by: Keith Packard <keithp@keithp.com>
5184 commit bef7c89dac68956a94ae386fa6b87165ab6cb484
5185 Author: Keith Packard <keithp@keithp.com>
5186 Date: Mon Mar 2 21:16:06 2015 -0800
5188 altos: Missing pad field in TMv2 data packet
5190 The normal ARM padding would have filled this in correctly, but it's
5191 best to be explicit about the structure.
5193 This also adds a test to make sure the resulting telemetry declaration
5194 is exactly 32 bytes,
5196 Signed-off-by: Keith Packard <keithp@keithp.com>
5198 commit 3b133656df4698ceb7af5902711edf9253a29227
5199 Author: Keith Packard <keithp@keithp.com>
5200 Date: Mon Mar 2 21:11:33 2015 -0800
5202 altos: Wait for BT disconnect before sending command
5204 If AltosDroid manages to connect to the BT module before we've
5205 configured it, we won't be able to talk to it as we can't force the
5206 module to ignore connection attempts. Wait for AltosDroid to give up
5207 and let us configure the device. Eventually, we'll manage, if
5208 AltosDroid's delay interval is longer than the time it takes to
5211 Signed-off-by: Keith Packard <keithp@keithp.com>
5213 commit 112f528755b6c8a2f6eef3bfec21fac981ffb44f
5214 Author: Keith Packard <keithp@keithp.com>
5215 Date: Mon Mar 2 21:08:44 2015 -0800
5217 ao-tools: Add ao-flash-stm32f0x
5219 This new script uses openocd to flash stm32f0x parts
5221 Signed-off-by: Keith Packard <keithp@keithp.com>
5223 commit ff3c27e3b842107680dc48084f71eb8c63f1bcab
5224 Author: Keith Packard <keithp@keithp.com>
5225 Date: Mon Mar 2 21:06:51 2015 -0800
5227 altoslib: Round frequency when configuring radio
5229 This makes sure we set the right frequency, instead of being off by
5230 1kHz on a regular basis...
5232 Signed-off-by: Keith Packard <keithp@keithp.com>
5234 commit e637367e8b940e1642a07b3b7c99147561de9cf1
5235 Author: Keith Packard <keithp@keithp.com>
5236 Date: Mon Mar 2 21:06:02 2015 -0800
5238 altosui/telegps: Add config option for APRS format
5240 Allow configuration of APRS compressed/uncompressed
5242 Signed-off-by: Keith Packard <keithp@keithp.com>
5244 commit 2614d20b324ab215ef22f178e3635d48e757fa9b
5245 Author: Keith Packard <keithp@keithp.com>
5246 Date: Mon Mar 2 21:02:31 2015 -0800
5248 altos: Make APRS format (compressed/uncompressed) configurable
5250 This provides a choice of compressed vs uncompressed when sending APRS
5251 packets to deal with receivers that still do not have support for the
5252 more useful compressed format.
5254 Signed-off-by: Keith Packard <keithp@keithp.com>
5256 commit 0724cc334a3bd8d81bbd4641d90a7e4040330efe
5257 Author: Keith Packard <keithp@keithp.com>
5258 Date: Sat Feb 28 16:06:23 2015 -0800
5260 altos/usbtrng: Split out random number generating code to separate driver
5262 Signed-off-by: Keith Packard <keithp@keithp.com>
5264 commit bd18bc5a42fcecfb710477371b9f62610a1ea640
5265 Author: Keith Packard <keithp@keithp.com>
5266 Date: Sat Feb 28 16:04:00 2015 -0800
5268 altos: Add chaoskey flash loader
5270 Signed-off-by: Keith Packard <keithp@keithp.com>
5272 commit a4c436a1c39da971b72d4302623f27af9d56cc38
5273 Author: Keith Packard <keithp@keithp.com>
5274 Date: Sat Feb 28 16:02:17 2015 -0800
5276 altos: Create chaoskey product
5278 Signed-off-by: Keith Packard <keithp@keithp.com>
5280 commit 476c5b87ea0901f70fe98b581ecca9afaf957607
5281 Author: Keith Packard <keithp@keithp.com>
5282 Date: Sat Feb 28 16:00:45 2015 -0800
5284 altos/stmf0: Allocate USB buffers at startup
5286 This lets the extra allocations used from ao_usb_alloc_buffers be
5287 allocated before the first USB connection happens.
5289 Signed-off-by: Keith Packard <keithp@keithp.com>
5291 commit e4b415cc8f839ceae48916b5e9d78f78589186cf
5292 Author: Keith Packard <keithp@keithp.com>
5293 Date: Sat Feb 28 16:00:17 2015 -0800
5295 altos/stmf0: Typo in ao_crc_stm.c
5299 Signed-off-by: Keith Packard <keithp@keithp.com>
5301 commit 27aef593fb4c037fdb65c9fb397829b42d72d0f2
5302 Author: Keith Packard <keithp@keithp.com>
5303 Date: Sat Feb 28 15:59:30 2015 -0800
5305 altos/stmf0: Fix fast ADC interface
5307 This was configuring the hardware wrong, and wasn't keeping the output
5310 Signed-off-by: Keith Packard <keithp@keithp.com>
5312 commit ec2d758844202108b446e6b12ec1da8812ceb265
5313 Author: Keith Packard <keithp@keithp.com>
5314 Date: Sat Feb 28 15:07:16 2015 -0800
5316 altos: Allow software to offer other USB interface classes than CDC
5318 This lets some boards offer non-CDC class USB interfaces so that the
5319 modem driver doesn't pick them up.
5321 Signed-off-by: Keith Packard <keithp@keithp.com>
5323 commit 4af4e36cda96d053458eeb040e35886890917385
5324 Merge: 91b1a80 106b16b
5325 Author: Bdale Garbee <bdale@gag.com>
5326 Date: Sun Feb 22 14:55:40 2015 -0700
5328 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
5330 commit 91b1a80650a7dcd7c5bf819618a8cea0fceb37d9
5331 Author: Bdale Garbee <bdale@gag.com>
5332 Date: Sun Feb 8 09:29:01 2015 -0700
5334 swap names so v3.0 is the default TeleDongle version to turn on
5336 commit 106b16b4d5d024543d7ad8c4b4762151e253f3c4
5337 Author: Keith Packard <keithp@keithp.com>
5338 Date: Mon Feb 16 22:22:37 2015 -0800
5340 altosdroid: Ignore automatic tab changing while activity is saved
5342 When the activity state is saved (after onSaveInstanceState()), we
5343 can't update the UI until the activity is restarted or restored; that
5344 means any UI changes we make, like switching tabs, must deal with this
5345 by allowing those changes to be ignored, using commitAllowingStateLoss
5348 Signed-off-by: Keith Packard <keithp@keithp.com>
5350 commit e6630ac41ca0d8563cf9a0df5d4acba8192e9624
5351 Author: Keith Packard <keithp@keithp.com>
5352 Date: Mon Feb 16 21:35:34 2015 -0800
5354 altosdroid: Missing file: DeviceAddress.java
5356 Signed-off-by: Keith Packard <keithp@keithp.com>
5358 commit 8f2d82461f3cf5da157b23ea45a2fa60d56b196b
5359 Author: Keith Packard <keithp@keithp.com>
5360 Date: Mon Feb 16 21:32:54 2015 -0800
5362 altosdroid: Only speak when GUI is running
5364 Create voice in onStart, stop it in onStop. This way, if some other
5365 application is in use, the voice won't be annoying you.
5367 Signed-off-by: Keith Packard <keithp@keithp.com>
5369 commit 877609a60a9f2c61c1efad8285b2a3c22f59be28
5370 Author: Keith Packard <keithp@keithp.com>
5371 Date: Mon Feb 16 21:19:09 2015 -0800
5373 altosdroid: Explicitly disconnect BT on termination or 'disconnect'
5375 This adds an explicit message to the telemetry service telling it when
5376 to stop trying to talk to the bluetooth device. Until this message is
5377 received, the service will reconnect to the specified BT device.
5379 That message is sent when you 'quit' the application, or when you 'disconnect'.
5381 Signed-off-by: Keith Packard <keithp@keithp.com>
5383 commit c51d39c7ea1153cd2d0dc02c47824a9f35b22fb9
5384 Author: Keith Packard <keithp@keithp.com>
5385 Date: Mon Feb 16 20:57:11 2015 -0800
5387 altosdroid: Lots of bluetooth connection changes
5389 Appears to more reliably abort in-progress connection attempts so you
5390 can switch TBT devices without having the previous device in
5393 Shows which device the connection is being attempted for.
5395 Eliminate the 10-second timer and just disable the service when the GUI
5396 shuts down while no BT connection is running.
5398 Signed-off-by: Keith Packard <keithp@keithp.com>
5400 commit b13a78e4f457f67605fc6dafc7f9733746a4f70c
5401 Author: Keith Packard <keithp@keithp.com>
5402 Date: Mon Feb 16 20:49:39 2015 -0800
5404 ao-bringup: Changes for telebt for keith's hacking
5406 Make the programming device auto-detect by username.
5407 Load binary from ~/altusmetrumllc
5409 Signed-off-by: Keith Packard <keithp@keithp.com>
5411 commit 2ebb4dff758058ae9512cf36518416eb69b928f0
5412 Author: Keith Packard <keithp@keithp.com>
5413 Date: Sun Feb 15 08:57:55 2015 -0800
5415 altos: Remove some accidental debug printfs from ao_packet.c
5417 While fixing the cc1200 configuration, I added some debug printfs to
5418 this code. They were accidentally committed with the fix...
5420 Signed-off-by: Keith Packard <keithp@keithp.com>
5422 commit 135abf0e7c5ceb5738a0b5f68fe2be4b7abdae5e
5423 Author: Keith Packard <keithp@keithp.com>
5424 Date: Sat Feb 14 23:18:38 2015 -0800
5426 altos/cc1200: Adjust bit-sync configuration
5428 The default bit timing adjustment mechanism allows for only a 0.2%
5429 deviation from the programmed bit timing. I found one TeleMini device
5430 which is beyond that tolerance as it was built with an older crystal
5433 Switch to the more expensive synchronization mechanism which allows up
5434 to 2% timing error, but requires a multi-byte preamble (which we
5435 have). This fixes packet mode nicely.
5437 Signed-off-by: Keith Packard <keithp@keithp.com>
5439 commit 9c75faf1ec51eb2f9a8dc9402653490143a784d9
5440 Author: Keith Packard <keithp@keithp.com>
5441 Date: Sat Feb 14 08:35:47 2015 -0800
5443 altos: embed ao_alarm and ao_clear_alarm in ao_sleep_for
5445 sdcc won't embed these itself, and thus consumes too much flash for
5448 Signed-off-by: Keith Packard <keithp@keithp.com>
5450 commit cc64e0e9d35e01b349680159a5bbd68d059134cd
5451 Author: Keith Packard <keithp@keithp.com>
5452 Date: Sat Feb 14 01:16:42 2015 -0800
5454 ao-bringup/turnon_telemini: Detect which programmer to use by $USER
5456 Bdale uses TD 100, keithp uses TD 186.
5458 Signed-off-by: Keith Packard <keithp@keithp.com>
5460 commit c4f9d96bdea192486f0e3f2d80b846c39a05c0ab
5461 Author: Keith Packard <keithp@keithp.com>
5462 Date: Sat Feb 14 01:13:21 2015 -0800
5464 altosuilib: Detect pair programming by product name, not USB id
5466 With TeleDongle, TeleBT and TeleMetrum coming in both pair- and self-
5467 programmable versions, we can't use the USB id to tell them
5468 apart. Instead, fetch the device name and use that instead.
5470 Signed-off-by: Keith Packard <keithp@keithp.com>
5472 commit 0e929ee2d0a3d1b1bacd36c2c3723ab860eb40b6
5473 Author: Keith Packard <keithp@keithp.com>
5474 Date: Sat Feb 14 01:11:30 2015 -0800
5476 altosui: Run all igniter status requests from non-GUI thread
5478 Anything run from the UI thread blocks the UI entirely; the Fire
5479 Igniters startup code to collect the number of pyro channels when
5480 building the UI was doing that from the UI thread. Switch that around
5481 so that the UI doesn't get built until that reply comes back, allowing
5482 the user to see the 'connecting' dialog, and cancel it if required.
5484 Signed-off-by: Keith Packard <keithp@keithp.com>
5486 commit f4c812bef76a2cd95f675cb27ea89059561ceec7
5487 Author: Keith Packard <keithp@keithp.com>
5488 Date: Fri Feb 13 23:51:10 2015 -0800
5490 altos: Replace ao_alarm/ao_clear_alarm with ao_sleep_for
5492 Having arbitrary alarms firing in the middle of complicated device
5493 logic makes no sense at all. Therefore only correct use of ao_alarm
5494 and ao_clear_alarm was around a specific ao_sleep call, with correct
5495 recovery in case the alarm fires.
5497 This patch replaces all uses of ao_alarm/ao_sleep/ao_clear_alarm with
5498 ao_sleep_for, a new function which takes the alarm timeout directly.
5500 A few cases which weren't simply calling ao_sleep have been reworked
5501 to pass the timeout value down to the place where sleep *is* being
5502 called, and having that code deal with the return correctly.
5504 Signed-off-by: Keith Packard <keithp@keithp.com>
5506 commit 1445725b983134d5a967dee88ef997bf15d4a422
5507 Author: Tom Marble <tmarble@info9.net>
5508 Date: Wed Feb 11 08:21:27 2015 -0600
5510 Added continuous output option to ao-usbtrng
5512 commit 65837616a6d073da8e3e2bf9da524a48cffb77c2
5513 Author: Keith Packard <keithp@keithp.com>
5514 Date: Mon Feb 9 07:28:18 2015 -0800
5516 altos/stmf0: Add ao_crc_stm.c
5518 Tom discovered that this was missing
5520 Signed-off-by: Keith Packard <keithp@keithp.com>
5522 commit fa813bcb6afc851cf4029b56c19ba46a3ae578f5
5523 Author: Tom Marble <tmarble@info9.net>
5524 Date: Mon Feb 9 08:35:24 2015 -0600
5526 Minor typo in man page
5528 commit e2cefd8593d269ce603aaf33f4a53a5c2dcb3350
5529 Author: Bdale Garbee <bdale@gag.com>
5530 Date: Sat Feb 7 22:36:22 2015 -0700
5532 update ChangeLog for release
5534 commit 26f61380ce6b4df80fa0b5a8a242cef79d5ae339
5535 Author: Bdale Garbee <bdale@gag.com>
5536 Date: Sat Feb 7 22:23:38 2015 -0700
5538 document addition of TeleDongle to the set of ARM targets to save binaries for
5540 commit 4231d68bae69d9a7d1f52205002db452cd5f986d
5541 Author: Keith Packard <keithp@keithp.com>
5542 Date: Sat Feb 7 20:42:15 2015 -0800
5544 Bump java library versions
5546 Lots of minor API/ABI changes; make sure people can install both 1.5
5547 and 1.6 at the same time.
5549 Signed-off-by: Keith Packard <keithp@keithp.com>
5551 commit c72d83ccd207b5300a90f2e84de6c5c96642478c
5552 Author: Keith Packard <keithp@keithp.com>
5553 Date: Sat Feb 7 20:36:10 2015 -0800
5555 altosuilib: Don't offer to graph some GPS details that TM doesn't log
5557 When using a TM eeprom file, various minor GPS details are logged
5558 (course, ground speed, climb rate, etc). Make sure these aren't
5559 offered up for graphing.
5561 Signed-off-by: Keith Packard <keithp@keithp.com>
5563 commit 426bacbbd6e0573b143e7c48d71db977e53181fc
5564 Author: Keith Packard <keithp@keithp.com>
5565 Date: Sat Feb 7 20:22:19 2015 -0800
5567 altosuilib: Get the Eeprom download progress bar working again
5569 The eeprom download code wasn't computing the start of each state
5570 transition correctly, so the progress bar was snapping to the end of
5571 the chunk for each state.
5573 Invalid state values would snap the bar to the right side.
5575 Landed state wasn't ever seen, so the bar would not ever fill.
5577 Signed-off-by: Keith Packard <keithp@keithp.com>
5579 commit aea188e4227993c508c7045d02f2bc87abd4e428
5580 Author: Keith Packard <keithp@keithp.com>
5581 Date: Sat Feb 7 18:10:34 2015 -0800
5583 doc: update 1.6 release notes with recent bug fixes
5585 Signed-off-by: Keith Packard <keithp@keithp.com>
5587 commit 0dd733efdbb66535889aafecbba45f49266ed886
5588 Author: Keith Packard <keithp@keithp.com>
5589 Date: Sat Feb 7 17:49:39 2015 -0800
5591 altosuilib: Set the icon and title of the telemetry scanning dialog
5593 Just need to call 'super' to get the window configured correctly.
5595 Signed-off-by: Keith Packard <keithp@keithp.com>
5597 commit 9d5a6914982a29d22103e0202735c9e01ee9e831
5598 Author: Keith Packard <keithp@keithp.com>
5599 Date: Sat Feb 7 17:35:15 2015 -0800
5601 altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI
5603 Instead of attempting to mash the saved state from AltosScanUI, just
5604 throw it away in AltosTelemetryReader.reset. Much cleaner, and more reliable.
5606 Signed-off-by: Keith Packard <keithp@keithp.com>
5608 commit cbc9ecd960d0dd27a2275b4550c30c5c88ccf5bb
5609 Author: Keith Packard <keithp@keithp.com>
5610 Date: Sat Feb 7 17:09:40 2015 -0800
5612 altosuilib: Reset telemetry state after processing it
5614 This avoids re-using stale state after switching telemetry reception
5615 parameters around, which otherwise generates spurious entries for the
5616 wrong frequencies in the scan results list.
5618 Signed-off-by: Keith Packard <keithp@keithp.com>
5620 commit c0ce45100dd205f59cd84465138c74d9b31df0bb
5621 Author: Keith Packard <keithp@keithp.com>
5622 Date: Sat Feb 7 17:08:03 2015 -0800
5624 altoslib: Drop telemetry packets processed while monitoring is disabled
5626 A lag between the thread queuing telemetry packets and one pulling
5627 them out can result in stale telemetry data being returned to the
5628 reader. Fix this by dropping telemetry read while monitoring is disabled.
5630 Signed-off-by: Keith Packard <keithp@keithp.com>
5632 commit 8a2be4d36a3b116d82529805430c5fb665688267
5633 Author: Keith Packard <keithp@keithp.com>
5634 Date: Sat Feb 7 15:09:57 2015 -0800
5636 altosuilib: Wait for product data while scanning
5638 Now that Altos only sends config information once every 5 seconds, we
5639 want to keep waiting for that if we're receiving packets successfully.
5641 Signed-off-by: Keith Packard <keithp@keithp.com>
5643 commit e70f3dca01b15b75b0b8795eb71bd12817af4800
5644 Author: Keith Packard <keithp@keithp.com>
5645 Date: Sat Feb 7 14:43:11 2015 -0800
5647 altoslib: Mark listener as 'not running' on EOF.
5649 This adds a 'running' member to the AltosListenerState class, and when
5650 the replay reader reaches EOF, marks the listener as no longer
5653 AltosUI and TeleGPS now display 'done' in the 'Age' field when this
5654 occurs, to let the user know that the replay is over.
5656 Also make sure that the display timers are stopped when this happens,
5657 or when the window is closed.
5659 Signed-off-by: Keith Packard <keithp@keithp.com>
5661 commit 08f07d0af123e1c307bc4c0c973da07fae8246b1
5662 Author: Keith Packard <keithp@keithp.com>
5663 Date: Sat Feb 7 14:40:17 2015 -0800
5665 altosui: Remove the dregs of AltosDroid load-old-telem code
5667 AltosDroid used to scan the old .telem file to return to the previous
5668 flight state on restart. Now it just loads the old state object
5669 instead, a vast improvement in performance.
5671 To do that, there were some changes in the altoslib code
5672 required. This patch just removes those, fixing replay bugs in TeleGPS
5675 Signed-off-by: Keith Packard <keithp@keithp.com>
5677 commit 0d08c427188f7b748d9ea7651143bc843e9c2691
5678 Author: Keith Packard <keithp@keithp.com>
5679 Date: Sat Feb 7 13:09:18 2015 -0800
5681 altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works
5683 With ao_packet_getchar returning 'char', AO_READ_AGAIN would get
5684 converted to 0xff instead of -1 on return, making ao_packet_echo
5685 either produce a bogus character on output, breaking command
5686 responses, or wedge and never exit when the link was dropped.
5688 Signed-off-by: Keith Packard <keithp@keithp.com>
5690 commit 4a5c64bef6952f25cadebc3e1f9909a5f513e015
5691 Author: Keith Packard <keithp@keithp.com>
5692 Date: Sat Feb 7 02:37:36 2015 -0800
5694 Update version 1.6 release notes with more bug fixes
5696 A few bugs found during release testing are notable enough to be
5697 included in the release notes.
5699 Signed-off-by: Keith Packard <keithp@keithp.com>
5701 commit 211cb482e4da04dc032432abc236ef8b5a5e732f
5702 Author: Keith Packard <keithp@keithp.com>
5703 Date: Sat Feb 7 01:30:21 2015 -0800
5705 altos: Separate out ao_tracker force from dbg
5707 Allow enabling telemetry when USB is connected without also enabling
5708 the motion debugging output.
5710 Signed-off-by: Keith Packard <keithp@keithp.com>
5712 commit f9f235bce84df3a6c0261e9d256aac544f87f70f
5713 Author: Keith Packard <keithp@keithp.com>
5714 Date: Sat Feb 7 01:05:57 2015 -0800
5716 altos/lpc: Give up on interrupt-driven SPI driver
5718 There are just too many limitations in when interrupts are delivered
5719 to make them useful. Instead, just drive the SPI directly with the
5720 CPU. At higher spi speeds (6Mhz or more), it's probably faster to do
5721 it this way anyways.
5723 Signed-off-by: Keith Packard <keithp@keithp.com>
5725 commit 4b52f67abd0f9ed6d8208556007d75e7ee735cf0
5726 Author: Keith Packard <keithp@keithp.com>
5727 Date: Sat Feb 7 01:05:03 2015 -0800
5729 altos/drivers: Increase SPI speed of CC115L to 6MHz
5731 The datasheet says that the maximum for back-to-back data is 6.5MHz.
5733 Signed-off-by: Keith Packard <keithp@keithp.com>
5735 commit ba22e2dbf87b139f0349f4dd8a7e6046514f5bad
5736 Author: Keith Packard <keithp@keithp.com>
5737 Date: Fri Feb 6 23:50:49 2015 -0800
5739 altoslib: Initialize GPS data to MISSING for Monitor Idle mode
5741 Make sure any un-set values are flagged correctly for the Monitor Idle
5742 UI by using the init() method.
5744 Signed-off-by: Keith Packard <keithp@keithp.com>
5746 commit 31fd32cd75f4f22458f0dc82823934672e16b988
5747 Author: Keith Packard <keithp@keithp.com>
5748 Date: Fri Feb 6 21:50:47 2015 -0800
5750 altoslib: Use 'stateless' for Monitor Idle
5752 This reflects the lack of flight state progression during Monitor Idle
5753 and ensures that the GPS 'ready' indicator will light after 10 solid
5756 Signed-off-by: Keith Packard <keithp@keithp.com>
5758 commit 449c6731b1977c7623dd006ec2db56f383f8d85a
5759 Author: Keith Packard <keithp@keithp.com>
5760 Date: Fri Feb 6 20:45:28 2015 -0800
5762 altoslib: Support TeleGPS for Monitor Idle
5764 TeleGPS has ADC and GPS values, so build the necessary ADC parser and
5765 then hook up GPS parsing.
5767 Signed-off-by: Keith Packard <keithp@keithp.com>
5769 commit 58f06706383418ebfa56d88ba51411e6185e09df
5770 Author: Keith Packard <keithp@keithp.com>
5771 Date: Fri Feb 6 20:40:05 2015 -0800
5773 altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing
5775 We don't log the visible sats from TeleGPS, only the basic GPS
5776 info. Have AltosFlightStats track whether sat info is present, then
5777 use that to elide the Sats In View graph entry as needed.
5779 Signed-off-by: Keith Packard <keithp@keithp.com>
5781 commit 35ad1833b10595564de84c88f44a214b1c134ccf
5782 Author: Keith Packard <keithp@keithp.com>
5783 Date: Fri Feb 6 20:36:44 2015 -0800
5785 altosuilib: EEProm download from TeleGPS doesn't have states
5787 As TeleGPS doesn't have flight states, the EEProm download progress
5788 bar shouldn't show 'state invalid', and it should use a different
5789 scale for each block.
5791 Fix this by having AltosConfigData know which devices have state based
5792 on their log format, then mark the progress bar state limits as
5793 'invalid/invalid' instead of 'boost/landed'. Then have the progress
5794 bar use that to set a more reasonable scale for each block.
5796 Signed-off-by: Keith Packard <keithp@keithp.com>
5798 commit 66e7a8081c07d0d96a31ae34963d430f06dccdfb
5799 Author: Keith Packard <keithp@keithp.com>
5800 Date: Fri Feb 6 04:45:17 2015 -0800
5802 altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607
5804 When doing 'Monitor Idle', we fetch new config data each iteration and
5805 pass that to each of the readers, including ms5607. Instead of
5806 re-fetching the config data there, just store the ms5607 parameters
5807 when we fetch it the first time and copy it over.
5809 Signed-off-by: Keith Packard <keithp@keithp.com>
5811 commit 14d524782af4f06d7f3722dcc852772ec493c2cc
5812 Author: Keith Packard <keithp@keithp.com>
5813 Date: Fri Feb 6 03:36:10 2015 -0800
5815 Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps
5817 Signed-off-by: Keith Packard <keithp@keithp.com>
5819 commit df47839824dd4e708c22fbf8f4a3054b9c45b9c3
5820 Author: Keith Packard <keithp@keithp.com>
5821 Date: Fri Feb 6 03:34:30 2015 -0800
5823 altosuilib: New teledongle and telebt devices are not pair-programmed
5825 Only list telebt-v1 and teledongle-v0 as pair-programmed devices so
5826 that newer versions go through the self-programming process
5828 Signed-off-by: Keith Packard <keithp@keithp.com>
5830 commit 21ff52befb27decc4b23458315620c47d7a07b21
5831 Author: Keith Packard <keithp@keithp.com>
5832 Date: Fri Feb 6 03:33:28 2015 -0800
5834 micropeak: Install Windows AltusMetrum driver bits
5836 Make AltOS-based µPUSB devices work with MicroPeak
5838 Signed-off-by: Keith Packard <keithp@keithp.com>
5840 commit a3f26f6d0c7574b8cdaecbccd7cfe89aaeb736b0
5841 Author: Keith Packard <keithp@keithp.com>
5842 Date: Fri Feb 6 03:32:27 2015 -0800
5844 micropeak: Support both FTDI and Altus Metrum USB IDs
5846 The windows driver only returns FTDI devices when
5847 altos_ftdi_list_start is invoked, so we need to call both that and the
5848 regular altos_list_start to get all of the devices.
5850 Signed-off-by: Keith Packard <keithp@keithp.com>
5852 commit cc707432c6eaedb9587bb63ac570146b356b6bfd
5853 Author: Keith Packard <keithp@keithp.com>
5854 Date: Fri Feb 6 03:31:07 2015 -0800
5856 micropeak: Fix file association registry install on Windows
5858 Need to invoke DisableX64FSRedirection before setting file association
5859 registry entries or Windows won't find our application.
5861 Signed-off-by: Keith Packard <keithp@keithp.com>
5863 commit 1fc5c8625f649b43d93f23a5fa1ba16773f2d0db
5864 Author: Keith Packard <keithp@keithp.com>
5865 Date: Fri Feb 6 03:03:58 2015 -0800
5867 windows: Look for current Java version in \SOFTWARE\Wow6432Node
5869 I have no idea what this is, but I found the Java version down in
5872 Signed-off-by: Keith Packard <keithp@keithp.com>
5874 commit 83d3d967f576a57285d40e77c4a17303edeef4f1
5875 Author: Keith Packard <keithp@keithp.com>
5876 Date: Fri Feb 6 03:03:00 2015 -0800
5878 Add 'keithp-fat' target for uploading temporary builds to keithp's machine
5880 This lets me quickly prepare a new test version for Windows/Mac in a
5883 Signed-off-by: Keith Packard <keithp@keithp.com>
5885 commit 7a7d60d72e2e742fbc364489721f356806966c03
5886 Author: Keith Packard <keithp@keithp.com>
5887 Date: Fri Feb 6 01:29:56 2015 -0800
5889 libaltos: Use more SetupDi API to get Windows 7 listing devices
5891 My Windows 7 box doesn't include 'SymbolicName' in the registry, but
5892 SetupDiGetDeviceInstanceId *does* return something that includes
5893 vid/pid/serial, so use that in preference.
5895 Signed-off-by: Keith Packard <keithp@keithp.com>
5897 commit 98db372758470cdaf7b517d670a7ce9186c787bc
5898 Author: Keith Packard <keithp@keithp.com>
5899 Date: Thu Feb 5 22:25:35 2015 -0800
5903 Signed-off-by: Keith Packard <keithp@keithp.com>
5905 commit 9fac8b639d2142c90eb95771cda1f6559e987db2
5906 Author: Keith Packard <keithp@keithp.com>
5907 Date: Fri Jan 16 22:09:26 2015 +1300
5909 altos/lpc: Double buffer USB data transfers
5911 This allocates twice the space in the USB memory so that transactions
5912 can be double buffered without using separate CPU memory.
5914 Signed-off-by: Keith Packard <keithp@keithp.com>
5917 src/lpc/ao_usb_lpc.c
5919 commit 0671b3c8c24c9f33be77a10315c4669f33c516d7
5920 Author: Keith Packard <keithp@keithp.com>
5921 Date: Thu Feb 5 16:08:44 2015 -0800
5923 altos/lpc: Clean up USB endpoint access functions
5925 The USB device endpoints can have two pointers in them, but we use
5926 only the first. Fix the access functions to take an index as to which
5927 we want so that we can disable the other address registers with them
5928 instead of requiring open-coded access.
5930 Signed-off-by: Keith Packard <keithp@keithp.com>
5932 commit a01ce949611b0c18df54c3f3877a43d27699c258
5933 Author: Keith Packard <keithp@keithp.com>
5934 Date: Thu Feb 5 15:34:05 2015 -0800
5936 altos/easymini-v1.0: Shrink stack to deal with USB changes
5938 Reverting the USB double buffering means using more RAM, need to
5939 shrink the EasyMini stack to accomodate that.
5941 Signed-off-by: Keith Packard <keithp@keithp.com>
5943 commit 2bde76fe852d7908a968168580be4cd4dc0333d6
5944 Author: Keith Packard <keithp@keithp.com>
5945 Date: Thu Feb 5 15:01:03 2015 -0800
5947 altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram
5949 The old USB code had static in/out buffers in ram
5951 Signed-off-by: Keith Packard <keithp@keithp.com>
5953 commit 5bf39f674b3d5ee98b55f42562a5ba1a9328ff07
5954 Author: Keith Packard <keithp@keithp.com>
5955 Date: Thu Feb 5 14:56:13 2015 -0800
5957 Revert LPC usb performance improvements
5959 There's something screwy going on, sticking garbage in the input
5962 Signed-off-by: Keith Packard <keithp@keithp.com>
5964 commit ef69872c824668146a3876f1f3d0d2e51d3e4c8d
5965 Author: Keith Packard <keithp@keithp.com>
5966 Date: Thu Feb 5 14:54:27 2015 -0800
5968 Revert "altos/lpc: Fix double-buffered USB changes"
5970 This reverts commit 41a0604ad1ea1a03e2db7d41731dbadf466b45db.
5972 commit aeca3b46bc1726a06952cc2ff86f50c6d80ed1e1
5973 Author: Keith Packard <keithp@keithp.com>
5974 Date: Wed Feb 4 22:55:24 2015 -0800
5976 ao-bringup: Add turnon_teledonglev3
5978 TeleDongle v3 uses the LPC11U14 processor which has no on-chip eeprom,
5979 so we must reflash the device to set the default radio calibration value.
5981 Signed-off-by: Keith Packard <keithp@keithp.com>
5983 commit bc41ab47b928b837724f8bc6b84d0b5b47c25df3
5984 Author: Keith Packard <keithp@keithp.com>
5985 Date: Wed Feb 4 20:33:04 2015 -0800
5987 altos: Rename teledongle-v1.9 as teledongle-v3.0
5989 No hardware changes from the 1.9 prototypes to the 3.0 final version.
5991 Signed-off-by: Keith Packard <keithp@keithp.com>
5993 commit dbafa16cfa897b2a5c6cf455cf8675e83eb0d7d6
5994 Author: Keith Packard <keithp@keithp.com>
5995 Date: Wed Feb 4 20:30:15 2015 -0800
5997 altos/telebt-v3.0: Set initial radio cal to a sensible value
5999 CC1200 uses a different xtal than CC1120, so the default calibration
6000 needs to change. This value hit 434.550 on SN 2407, so it seems like a
6001 reasonable place to start.
6003 Signed-off-by: Keith Packard <keithp@keithp.com>
6005 commit be443d8d50ad8f59a74bf2f4e810a7359ff72132
6006 Author: Keith Packard <keithp@keithp.com>
6007 Date: Sun Feb 1 16:57:14 2015 +0100
6009 altos/telebt-v3.0: Add monitor bits
6011 Will be useful to actually be able to receive telemetry
6013 Signed-off-by: Keith Packard <keithp@keithp.com>
6015 commit 6eb145d48cfcabf757093433bd2314a80e490a17
6016 Author: Keith Packard <keithp@keithp.com>
6017 Date: Sun Feb 1 16:46:40 2015 +0100
6019 altos/usbtrng-v2.0: Select PA11/PA12 mapping config value
6021 Signed-off-by: Keith Packard <keithp@keithp.com>
6023 commit 8f9e192e9d1c6fab9843939ff9117f6bb3725943
6024 Author: Keith Packard <keithp@keithp.com>
6025 Date: Sun Feb 1 16:44:52 2015 +0100
6027 altos/stmf0: Support PA11/PA12 remapping
6029 Small pin-count versions of the STMF0 can remap PA11/PA12 on the same
6030 pins as PA9/PA10. These are used by USB, so have the USB driver deal
6031 with remapping them.
6033 Signed-off-by: Keith Packard <keithp@keithp.com>
6035 commit 466d3e977ca279f97944141fcc12c04f4f58212e
6036 Author: Keith Packard <keithp@keithp.com>
6037 Date: Sun Feb 1 16:44:07 2015 +0100
6039 altos/telebt-v3.0: Turn red LED off after initialization
6041 This lets the user know the device successfully initialized.
6043 Signed-off-by: Keith Packard <keithp@keithp.com>
6045 commit 845ae016d700c37948e053ead5f7e2778356fda3
6046 Author: Keith Packard <keithp@keithp.com>
6047 Date: Sun Feb 1 16:43:06 2015 +0100
6049 altos/telebt-v3.0: Fix stdio setup for BTM
6051 Make sure the BTM module is allowed to be included in stdio, but delay
6052 adding that until the BT link is running.
6054 Signed-off-by: Keith Packard <keithp@keithp.com>
6056 commit a138e05ae6241a6743ca9f64528124f5f6c8e0ee
6057 Author: Keith Packard <keithp@keithp.com>
6058 Date: Sun Feb 1 16:42:01 2015 +0100
6060 altos: Always include a check for stdio overflow
6062 For some reason, the check for running out of space to record stdio
6063 devices was disabled when only one device was expected.
6065 Signed-off-by: Keith Packard <keithp@keithp.com>
6067 commit 870428a909025988a8cd834755ea166e2d1e34ca
6068 Author: Keith Packard <keithp@keithp.com>
6069 Date: Sun Feb 1 16:39:17 2015 +0100
6071 altos/btm: Add fancier debug. Pull serial reset port low.
6073 Adds an interactive debugging mode to help diagnose BTM issues.
6075 Discovered that the serial reset pin on the BTM needs to be pulled low
6076 for the device to work correctly.
6078 Leave the bt link interrupt disabled until things are initialized.
6080 Signed-off-by: Keith Packard <keithp@keithp.com>
6082 commit 44a503a8cf3778cad5469c592e8ccbae58e44b97
6083 Author: Keith Packard <keithp@keithp.com>
6084 Date: Sun Feb 1 16:36:51 2015 +0100
6086 altos/stm: Add ability to delay STDIO usage for serial ports
6088 Bluetooth needs to delay adding the serial port to stdio until the
6089 link is up and running. The cc1111 serial driver had
6090 DELAY_SERIAL_*_STDIN bits which have been added to the STM serial driver.
6092 Signed-off-by: Keith Packard <keithp@keithp.com>
6094 commit 252211e9e54a1e6f4efe2df6382ce60c909de70c
6095 Author: Keith Packard <keithp@keithp.com>
6096 Date: Fri Jan 30 14:04:50 2015 +0100
6098 And, also add the TeleBT v3.0 flash loader Makefile
6100 Signed-off-by: Keith Packard <keithp@keithp.com>
6102 commit bfa5c70a827ac8be23ca48797edc14e13461d6ac
6103 Author: Keith Packard <keithp@keithp.com>
6104 Date: Fri Jan 30 14:03:55 2015 +0100
6106 Oops, forgot the TeleBT-v3.0 Makefile
6108 git doesn't warn about files named 'Makefile' because they're supposed
6111 Signed-off-by: Keith Packard <keithp@keithp.com>
6113 commit 8ca1f234586225caea1040bc229b63491dadc1cb
6114 Author: Keith Packard <keithp@keithp.com>
6115 Date: Tue Jan 27 20:41:15 2015 -0800
6117 altos/stmf0: Re-implement fast ADC code for stmf0
6119 This creates a ring buffer for ADC data so that ADC fetching can run
6120 in parallel with other activities.
6122 Signed-off-by: Keith Packard <keithp@keithp.com>
6124 commit 3749426af1e900a1b3354922fdd7e8b3bfa38084
6125 Author: Keith Packard <keithp@keithp.com>
6126 Date: Tue Jan 27 17:18:42 2015 -0800
6128 altos/usbtrng-v2.0: Use stmf042 hardware CRC unit
6130 Switch from software to hardware for CRC computation. I think this
6131 must be faster, right?
6133 Signed-off-by: Keith Packard <keithp@keithp.com>
6135 commit a95d6776dea86cdc4bdc3512505ba7e75365c127
6136 Author: Keith Packard <keithp@keithp.com>
6137 Date: Tue Jan 27 16:55:27 2015 -0800
6139 altos/stmf0: Add CRC driver
6141 Sets up the stm32f0 CRC hardware, exposing inline functions to access
6142 it. DMA access is possible, but usbtrng can't use that.
6144 Signed-off-by: Keith Packard <keithp@keithp.com>
6146 commit 79f3434013650fe4e3d76e5eb56a10000ee34249
6147 Author: Keith Packard <keithp@keithp.com>
6148 Date: Tue Jan 27 09:36:19 2015 -0800
6150 altos/stmf0: Remove remaining stm32l bits from stm32f0 code
6152 These were left over from the stm32f0 initial implementation work; now
6153 it's more useful to list only the bits which are valid.
6155 Signed-off-by: Keith Packard <keithp@keithp.com>
6157 commit bf08397202860a73417cd1711012eb3e33f308c3
6158 Author: Keith Packard <keithp@keithp.com>
6159 Date: Mon Jan 26 22:23:19 2015 -0800
6161 ao-tools: Add ao-usbtrng to dump RNG data for testing
6163 ao-usbtrng reads a specified number of kilobytes of random data from
6164 a random number generator.
6166 Signed-off-by: Keith Packard <keithp@keithp.com>
6168 commit ee91e1da606c8a8fade278a3aeae9c1cc9014b84
6169 Author: Keith Packard <keithp@keithp.com>
6170 Date: Mon Jan 26 22:22:00 2015 -0800
6172 altos/stm: Fix typo in stm32l.h
6174 This crept in while working on the stmf0 bits. oops.
6176 Signed-off-by: Keith Packard <keithp@keithp.com>
6178 commit ac1a58af4d281a9bc3572dc503982a94e439a4c1
6179 Author: Keith Packard <keithp@keithp.com>
6180 Date: Mon Jan 26 22:16:18 2015 -0800
6182 altos/usbtrng-v2.0: Add random output command
6184 Read chunks of random ADC data, do some CRC16 computations to de-bias
6185 and merge 4 bytes of input data into 2 bytes of output data, then dump
6188 Signed-off-by: Keith Packard <keithp@keithp.com>
6190 commit 729bb7a405460db8d44c9ff6ee903b28c7499a02
6191 Author: Keith Packard <keithp@keithp.com>
6192 Date: Mon Jan 26 22:14:57 2015 -0800
6194 altos/stmf0: Add ADC and DMA APIs
6196 The ADC api is what USBtrng wants; a way to repeatedly read a single
6197 ADC input as fast as possible.
6199 Signed-off-by: Keith Packard <keithp@keithp.com>
6201 commit a01effc2f64c757c907e0f4937b4d3710b97bde0
6202 Author: Keith Packard <keithp@keithp.com>
6203 Date: Mon Jan 26 22:12:40 2015 -0800
6205 altos/stmf0: Add faster USB path
6207 This adds a way to allocate private USB buffers for sending data
6208 without needing to copy it again. It requires ensuring that all
6209 accesses are 16 bits aligned to 16 bit boundaries.
6211 Signed-off-by: Keith Packard <keithp@keithp.com>
6213 commit e1d5bcb1968e280b8ebdf6c8b12e8a87167fd890
6214 Author: Keith Packard <keithp@keithp.com>
6215 Date: Mon Jan 26 22:10:47 2015 -0800
6217 altos/stmf0: Fix linker scripts to make ao_boot work
6219 The flash loader ended up assuming ao_boot was at the start of ram,
6220 while the application stuck it after the interrupt table (where it
6223 Signed-off-by: Keith Packard <keithp@keithp.com>
6225 commit 32c68670af9f8aa690c64d64502e559c0df0c1db
6226 Author: Keith Packard <keithp@keithp.com>
6227 Date: Sun Jan 25 19:58:38 2015 -0800
6229 ao-tools: Add --wait option to ao-usbload
6231 This waits forever for USB writes to complete, instead of timing out
6232 after five seconds. Useful when debugging the device.
6234 Signed-off-by: Keith Packard <keithp@keithp.com>
6236 commit 02b07a202839d6e68b3f0db7f8965478661db140
6237 Author: Keith Packard <keithp@keithp.com>
6238 Date: Sun Jan 25 19:37:05 2015 -0800
6240 altos: Add flash-loader to usbtrng-v2.0
6242 Uses the new STM32F042 flash loading bits.
6244 Signed-off-by: Keith Packard <keithp@keithp.com>
6246 commit df881bce8576f091b2d8cb53b8ce8a43aeedecde
6247 Author: Keith Packard <keithp@keithp.com>
6248 Date: Sun Jan 25 19:35:19 2015 -0800
6250 altos: Add self-flash support for STM32F042 processor
6252 Also moves the usual address for applications out of the way of the
6255 Signed-off-by: Keith Packard <keithp@keithp.com>
6257 commit 02e1058fa52ee7c867ea6c9031ebb9e21d14889c
6258 Author: Keith Packard <keithp@keithp.com>
6259 Date: Sun Jan 25 16:43:48 2015 -0800
6261 altos: USBtrng v2.0 hardware bringup
6263 Gets the USB connection running and blinks the LEDs.
6265 Signed-off-by: Keith Packard <keithp@keithp.com>
6267 commit 02f03df6d089cafae99f8ce15dcbd87f6e78d749
6268 Author: Keith Packard <keithp@keithp.com>
6269 Date: Sun Jan 25 16:42:39 2015 -0800
6271 altos: Initial STMF04x support
6273 Basic clock configuration, OS support, LED and USB drivers.
6275 Signed-off-by: Keith Packard <keithp@keithp.com>
6277 commit 0e7d1c89fea98eabca738f10cbfebec631be3bb7
6278 Author: Keith Packard <keithp@keithp.com>
6279 Date: Sat Jan 24 11:18:59 2015 -0800
6281 altos: Add support for TeleBT v3.0
6283 Add support to the BTM driver for non-CC1111 interrupts
6284 Add HW flow control to STM serial driver
6286 Signed-off-by: Keith Packard <keithp@keithp.com>
6288 commit 41a0604ad1ea1a03e2db7d41731dbadf466b45db
6289 Author: Keith Packard <keithp@keithp.com>
6290 Date: Thu Jan 22 21:31:45 2015 -0800
6292 altos/lpc: Fix double-buffered USB changes
6294 These got merged when we were down in Auckland, but before they'd been
6295 finished. Transmitting worked fine, but receiving was mis-configuring
6296 the OUT buffer size in the hardware.
6298 Signed-off-by: Keith Packard <keithp@keithp.com>
6300 commit 291eec859606b73b43072cd2debfbb92659e0d95
6301 Author: Keith Packard <keithp@keithp.com>
6302 Date: Thu Jan 22 20:34:43 2015 -0800
6304 altos: Get rid of some accidental debug code
6306 I was debugging the accelerometer calibration code and left some
6307 printfs in it, which made TM run out of flash space.
6309 Signed-off-by: Keith Packard <keithp@keithp.com>
6311 commit e05e0c6b71a1df65f188e00622e9632eb27510fd
6312 Author: Keith Packard <keithp@keithp.com>
6313 Date: Fri Jan 16 22:09:26 2015 +1300
6315 Set version to 1.5.9.1
6317 commit 2a053d3d157e00b6a6406f4f78ddb8e298b6c4b7
6318 Author: Keith Packard <keithp@keithp.com>
6319 Date: Mon Dec 22 17:27:09 2014 -0800
6321 altos/lpc: Switch LPC SPI driver to interrupt-driven
6323 This improves performance for SPI transfers, while allowing other
6324 tasks to get work done during longer SPI transfers.
6326 Signed-off-by: Keith Packard <keithp@keithp.com>
6328 commit 213a6604ec225e843f30244e6f94d0ebb3d27e46
6329 Author: Keith Packard <keithp@keithp.com>
6330 Date: Mon Dec 22 17:11:51 2014 -0800
6332 altos: Adjust CC1200 RSSI reporting value
6334 On the test setup, we were about 13dB off, so tweak the settings to
6335 suit. This result wasn't tested; it's just a rough offset until we get
6336 a production run of TeleDongle boards back to do more systematic
6339 Signed-off-by: Keith Packard <keithp@keithp.com>
6341 commit 014dcc1f179237dc247fafa4a2cff91809260681
6342 Author: Keith Packard <keithp@keithp.com>
6343 Date: Mon Dec 22 17:10:33 2014 -0800
6345 altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm
6347 We built a custom TeleGPS load for radio sensitivity measurements with
6348 the lowest documented power level setting (0x03), and measured the
6349 power out at that value of -31.75dBm on the test board.
6351 Signed-off-by: Keith Packard <keithp@keithp.com>
6353 commit cf09ee2a4b093c56b64260c3db3f5e07143aa888
6354 Author: Keith Packard <keithp@keithp.com>
6355 Date: Tue Dec 9 21:44:53 2014 -0800
6357 ao-bringup: Clear pending output before setting frequency.
6359 Maybe this will unwedge things
6361 Signed-off-by: Keith Packard <keithp@keithp.com>
6363 commit 5b7ec0c69343db3793c0317939b5eff1f2d04752
6364 Author: Keith Packard <keithp@keithp.com>
6365 Date: Sat Dec 6 15:08:53 2014 -0800
6367 micropeak: Support µPUSB with our own USB ids
6369 This matches the new µPUSB id as well as the FTDI USB id.
6371 Signed-off-by: Keith Packard <keithp@keithp.com>
6373 commit 7e52ef59082cb2afdba498233c429321c37a6ac3
6374 Author: Keith Packard <keithp@keithp.com>
6375 Date: Sat Dec 6 15:08:29 2014 -0800
6377 altoslib: Add usbtrng, usbrelay and mpusb USB ids
6379 Signed-off-by: Keith Packard <keithp@keithp.com>
6381 commit 7339d2379713b5b7e4c4fe6bad89ed93f9d39e82
6382 Merge: d1f9121 b6462ca
6383 Author: Bdale Garbee <bdale@gag.com>
6384 Date: Sat Dec 6 15:39:53 2014 -0700
6386 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
6388 commit d1f9121593fe30b924223e89ef4d596b5bec2b25
6389 Author: Bdale Garbee <bdale@gag.com>
6390 Date: Sat Dec 6 15:39:35 2014 -0700
6392 improve test procedures for TeleMega
6394 commit b6462ca3a7e99fe390ec97f94c23d36fab8c294d
6395 Author: Keith Packard <keithp@keithp.com>
6396 Date: Sun Nov 23 18:56:40 2014 -0800
6398 altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start
6400 Because we're allowing even signals only weakly correlated with the
6401 preamble through to sync detection, we can't use the PQT_REACHED
6402 symbol to tell when a packet header has been seen. Instead, just look
6405 Signed-off-by: Keith Packard <keithp@keithp.com>
6407 commit 0e3eeaf59688dac92eb3a27d589923126cb34e00
6408 Author: Keith Packard <keithp@keithp.com>
6409 Date: Sun Nov 23 18:50:57 2014 -0800
6411 altos/cc1200: Open up preamble detect to improve sensitivity
6413 Increase soft decision PQT value to max (15) to ensure that we detect
6416 Signed-off-by: Keith Packard <keithp@keithp.com>
6418 commit eabeb76a2a9acb624ae364c4f0f315bfc3549d98
6419 Author: Keith Packard <keithp@keithp.com>
6420 Date: Sun Nov 23 18:31:15 2014 -0800
6422 altos/cc1200: Wait for packet to be placed in FIFO during receive
6424 This changes the receive code to use MCU_STATUS, waiting for
6425 MARC_STATUS1 to indicate that the packet is in the fifo before reading
6428 It also fixes the receive timeout code to keep receiving if the
6429 preamble or sync have been seen when the timeout fires. This makes
6430 TeleLCO able to use short timeouts during scanning while still
6431 successfully receiving packets.
6433 Signed-off-by: Keith Packard <keithp@keithp.com>
6435 commit 2163f6e6b341b7840f03e89d568699b8ea186435
6436 Author: Keith Packard <keithp@keithp.com>
6437 Date: Sun Nov 16 16:39:18 2014 -0800
6439 altos/teledongle-v1.8: Make this the same as teledongle v1.9
6441 Remove RSSI LED blinking, add CRC error LED
6443 Signed-off-by: Keith Packard <keithp@keithp.com>
6445 commit 54f7ab842a8cba3003cd5a9deb2515151263ca2e
6446 Author: Keith Packard <keithp@keithp.com>
6447 Date: Sun Nov 16 16:38:12 2014 -0800
6449 altos: Allow TeleMega to be built without MPU6000
6451 Robert Braibish's board has a dead MPU6000; this fix lets the TeleMega
6452 firmware build without that driver so the rest of the board could be verified.
6454 Signed-off-by: Keith Packard <keithp@keithp.com>
6456 commit f16ea9abfaac9eee3b0935c586e383ae046d6cf5
6457 Author: Keith Packard <keithp@keithp.com>
6458 Date: Sun Nov 16 16:37:15 2014 -0800
6460 altosui: Remove duplicate AltosUIPreferencesBackend.java
6462 There's a copy in altosuilib
6464 Signed-off-by: Keith Packard <keithp@keithp.com>
6466 commit abdf3177293c57e659017b64819c13f11c126011
6467 Author: Keith Packard <keithp@keithp.com>
6468 Date: Sun Nov 16 13:41:27 2014 -0800
6470 altos/microsplash: fix .gitignore to ignore resulting binary
6472 commit 97a321692c2e41a1d3f77fb541780ada945eff52
6473 Author: Keith Packard <keithp@keithp.com>
6474 Date: Sun Nov 16 13:40:15 2014 -0800
6476 Add AltosDroid release note for version 1.5
6478 commit 47956ac01397c0a7fafc6b0a4840113186924b2e
6479 Author: Keith Packard <keithp@keithp.com>
6480 Date: Sun Nov 16 13:17:55 2014 -0800
6482 altosdroid: East and West were flipped in all GPS output
6484 East is positive, West is negative
6486 Signed-off-by: Keith Packard <keithp@keithp.com>
6488 commit 5aae1446026a08bf8f09c56b960545eff30a8bd1
6489 Author: Keith Packard <keithp@keithp.com>
6490 Date: Sat Nov 15 22:52:42 2014 -0800
6492 altosdroid: Save AltosState and restore at startup
6494 Instead of re-parsing the old logfile, save the current state in the
6495 preferences database and restore at restart of the
6496 TelemetryService. This makes the state get restored even before the BT
6497 connection is recovered.
6499 Signed-off-by: Keith Packard <keithp@keithp.com>
6501 commit 52ce23327bd81e2d40a1817442e75bd6b60ffe95
6502 Author: Keith Packard <keithp@keithp.com>
6503 Date: Sat Nov 15 22:50:31 2014 -0800
6505 altoslib: add AltosPreferences state save/restore interfaces
6507 This serializes an entire AltosState object and stores it in the
6508 preferences database for later retrieval. AltosDroid uses this to
6509 recover the old state data when restarting.
6511 Signed-off-by: Keith Packard <keithp@keithp.com>
6513 commit a488da3ca72fe0778b2d79a8cac935621d1d789d
6514 Author: Keith Packard <keithp@keithp.com>
6515 Date: Sat Nov 15 22:49:06 2014 -0800
6517 altosdroid: TabMap needs to expose () constructor
6519 Otherwise we get an exception at startup time for some reason.
6521 Signed-off-by: Keith Packard <keithp@keithp.com>
6523 commit deda23963586eb07a32f9a3c83a0355178e19340
6524 Author: Keith Packard <keithp@keithp.com>
6525 Date: Sat Nov 15 22:48:15 2014 -0800
6527 altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
6529 This lets us store arbitrary binary data in the preferences database
6531 Signed-off-by: Keith Packard <keithp@keithp.com>
6533 commit e5dd00ef0014364fc059970cc020f209b3b16cf8
6534 Author: Keith Packard <keithp@keithp.com>
6535 Date: Sat Nov 15 22:46:01 2014 -0800
6537 altosdroid: Don't display MISSING flight number
6539 Just check and clear the entry if we end up seeing that value
6541 Signed-off-by: Keith Packard <keithp@keithp.com>
6543 commit 60edcfe410e7fa848813d6c1ed8dc9808887d041
6544 Author: Keith Packard <keithp@keithp.com>
6545 Date: Sat Nov 15 16:03:32 2014 -0800
6547 altoslib: Make AltosState serializable
6549 This involved making every class it references serializable as well
6551 Signed-off-by: Keith Packard <keithp@keithp.com>
6553 commit 4d4fee0b0091a1b6257a06f62b1078778cdb417f
6554 Author: Keith Packard <keithp@keithp.com>
6555 Date: Mon Nov 10 14:41:17 2014 -0800
6557 altoslib: Missing headers for mag sensor in CSV output
6559 Kelsey Black <nmonic@gmail.com> reported that the TeleMega CSV output
6560 was missing the header labels for the mag sensor data.
6562 Signed-off-by: Keith Packard <keithp@keithp.com>
6564 commit 437eba2ff27b2b7dfd0f363819b9a43ab8b28ead
6565 Author: Keith Packard <keithp@keithp.com>
6566 Date: Thu Nov 6 20:04:47 2014 -0800
6568 altos: Reset interrupt flags before TX in CC1200 driver
6570 Failing to reset the flags set during interrupt leads to
6571 short-circuiting transmission and not a lot of packets going out.
6573 Signed-off-by: Keith Packard <keithp@keithp.com>
6575 commit 7f742824673e5e6034defdb09b66d4d56eb8d4fe
6576 Author: Keith Packard <keithp@keithp.com>
6577 Date: Thu Nov 6 16:05:49 2014 -0800
6579 altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
6581 Signed-off-by: Keith Packard <keithp@keithp.com>
6583 commit 6a082d9b5ed169b9d4153885f3535987e5ae5d84
6584 Author: Keith Packard <keithp@keithp.com>
6585 Date: Thu Nov 6 16:04:56 2014 -0800
6587 altos/lpc: Disable JTAG when using pins for GPIO
6589 JTAG is enabled by default, making those pins not support GPIO unless
6590 specifically configured.
6592 Signed-off-by: Keith Packard <keithp@keithp.com>
6594 commit 58db263cc835be0abb972654c2d7369718c88b37
6595 Author: Keith Packard <keithp@keithp.com>
6596 Date: Thu Nov 6 16:04:14 2014 -0800
6598 altos/lpc: Declare SPI send parameters as const
6602 Signed-off-by: Keith Packard <keithp@keithp.com>
6604 commit d3dd45b060c996153ff8195bd371e9e1f3b15efb
6605 Author: Keith Packard <keithp@keithp.com>
6606 Date: Thu Nov 6 16:02:47 2014 -0800
6608 altos: Use other TeleDongle LED for CRC-invalid packet reporting
6610 Instead of blinking out some fake-o RSSI indication, just blink the
6611 red LED when a packet with a bad CRC is received.
6613 Signed-off-by: Keith Packard <keithp@keithp.com>
6615 commit 2313cdacefb2139bc68cd98e782c54d706af0704
6616 Author: Keith Packard <keithp@keithp.com>
6617 Date: Thu Nov 6 16:02:07 2014 -0800
6619 altosuilib: GPS errors are recorded in floating point, not integers
6621 Fix the format used to present them in the info table.
6623 Signed-off-by: Keith Packard <keithp@keithp.com>
6625 commit 2f0ff9675017655846a8abc617b4dc9a3666d0b9
6626 Author: Keith Packard <keithp@keithp.com>
6627 Date: Thu Nov 6 16:01:24 2014 -0800
6629 altos: Use AO_SPO_SPEED_FAST for CC1200
6631 This asks for the fastest available SPI speed, instead of fixing it to
6632 8MHz, which may not be supported on every architecture.
6634 Signed-off-by: Keith Packard <keithp@keithp.com>
6636 commit 80a0397dde2f787fb20fd2520b274b826c68ed5a
6637 Author: Keith Packard <keithp@keithp.com>
6638 Date: Thu Nov 6 16:00:06 2014 -0800
6640 altos: Stop attempting to ramp power on CC115L
6642 The PA register on the 115L isn't in any way monotonic, making the old
6643 code broken. Just rempve it instead of fixing it; we don't ramp
6646 Signed-off-by: Keith Packard <keithp@keithp.com>
6648 commit f2e5ffd839fe5be99359e4c86a96f03148bac698
6649 Author: Keith Packard <keithp@keithp.com>
6650 Date: Thu Nov 6 15:58:42 2014 -0800
6652 altos: Declare port register type only in arch header
6654 Instead of defaulting to 8 bits, explicitly require declaration of the
6655 type of the port register for each architecture.
6657 Signed-off-by: Keith Packard <keithp@keithp.com>
6659 commit f2060d6ca222a04608e598baf59757f12ea2ec70
6660 Author: Keith Packard <keithp@keithp.com>
6661 Date: Thu Nov 6 13:27:29 2014 -0800
6663 Move teledongle 1.9 to 1.8; there's a new 1.9
6665 1.9 is now the lpc11u14-based form-factor prototype board.
6667 Signed-off-by: Keith Packard <keithp@keithp.com>
6669 commit b67556949aa080fc5e70771e972de880e44eca12
6670 Author: Keith Packard <keithp@keithp.com>
6671 Date: Wed Nov 5 22:11:44 2014 -0800
6673 altos: Rename microwater to microsplash
6675 Signed-off-by: Keith Packard <keithp@keithp.com>
6677 commit b0e903a76276e33f531eade42ac721c9490c6758
6678 Author: Keith Packard <keithp@keithp.com>
6679 Date: Thu Oct 30 21:59:45 2014 -0700
6681 altosui: Pop up 'Connecting' dialog during Monitor Idle
6683 This was a bit harder than expected as I had to wire up a way to shut
6684 down the whole monitor idle window when you clicked on the cancel button.
6686 Signed-off-by: Keith Packard <keithp@keithp.com>
6688 commit ef00182c79bd7a56fbc5d782cb8f4aa0079bb86f
6689 Author: Keith Packard <keithp@keithp.com>
6690 Date: Sat Oct 25 21:14:25 2014 -0700
6692 altos: Increase CC1200 SPI data rate to 8MHz
6694 This got set to 125kHz to make debugging with a logic analyzer easier
6695 and never changed back to a reasonable speed.
6697 Signed-off-by: Keith Packard <keithp@keithp.com>
6699 commit 4d51570ed8776461d084726149923c5be43d622e
6700 Author: Keith Packard <keithp@keithp.com>
6701 Date: Sat Oct 25 19:56:25 2014 -0700
6703 altos: Fix up telemetry delay computations
6705 With RDF, APRS and telemetry all being sent at varying rates,
6706 computing when to send the next radio data is not as simple as sending
6707 telemetry and then figuring out whether to send RDF and/or APRS.
6709 Fix this by computing times for the next telemetry/rdf/aprs packet,
6710 and only sending each when that time has passed. Compute the delay
6711 until the next radio activity as the minimum time to any transmission.
6713 This also adds code to the config bits to reset the radio times
6714 whenever something changes that might affect which radio data to send
6717 Signed-off-by: Keith Packard <keithp@keithp.com>
6719 commit c831f1ffb378c20b7513d209d60cdd5dee9db85b
6720 Author: Keith Packard <keithp@keithp.com>
6721 Date: Sat Oct 25 17:44:48 2014 -0700
6723 altos: Perform cc1200 calibration less often. Tweak radio params
6725 This performs calibration after every 4 operations, or when the
6726 frequency changes. This reduces the time it takes to get to receive
6729 This also makes the sync and preamble qualifiers more strict to reject
6732 Signed-off-by: Keith Packard <keithp@keithp.com>
6734 commit 3f7263f57b1b697d92ed6c3d62956e5bdfc11f24
6735 Author: Keith Packard <keithp@keithp.com>
6736 Date: Sat Oct 25 11:20:44 2014 -0700
6738 altos: Remove old AO_SEND_ALL_BARO bits
6740 This was used for testing the original TeleMini which couldn't log
6743 Signed-off-by: Keith Packard <keithp@keithp.com>
6745 commit ae4be19f8ab0899a879a10aec28dc381f44dd2c7
6746 Author: Keith Packard <keithp@keithp.com>
6747 Date: Sat Oct 25 10:21:30 2014 -0700
6749 altos: Build TeleDongle v1.9 by default
6751 Signed-off-by: Keith Packard <keithp@keithp.com>
6753 commit 51ef3fad6435c0b21945d48fbbaa5a4c092c4960
6754 Author: Keith Packard <keithp@keithp.com>
6755 Date: Sat Oct 25 10:20:07 2014 -0700
6757 altos: Increase PQT value for cc1200 improving sensitivity
6759 The PQT value indicates how 'good' the preamble is; higher values
6760 allow a lower quality of preamble to pass the test, permitting more
6761 packets to be decoded.
6763 Signed-off-by: Keith Packard <keithp@keithp.com>
6765 commit 9102183b40f0b32d4fb6d24502b79a6431184310
6766 Author: Keith Packard <keithp@keithp.com>
6767 Date: Sat Oct 25 10:17:48 2014 -0700
6769 altos: Sort out ao_gps_print altitude fetching
6771 ao_gps_print is used by both teledongle/telebt and the host-based GPS
6772 test code. The first instance uses the old internal GPS structure,
6773 containing just a 16-bit altitude while the second uses an
6774 ao_telemetry structure, which contains 32 bits split into two
6777 Signed-off-by: Keith Packard <keithp@keithp.com>
6779 commit cb83b5432e1320726ad496ded78cced7274618b0
6780 Author: Keith Packard <keithp@keithp.com>
6781 Date: Tue Oct 7 05:36:18 2014 +0200
6783 altos/teledongle-v1.9: Add remaining code to complete the project
6785 This turns the prototype board into a full teledongle
6787 Signed-off-by: Keith Packard <keithp@keithp.com>
6789 commit 4a3fe79266a77f8fc001117f49db1d2f14f9e6b6
6790 Author: Keith Packard <keithp@keithp.com>
6791 Date: Tue Oct 7 05:34:06 2014 +0200
6793 altos: Complete cc1200 driver
6795 Deal with differences between cc1120 and cc1200, including built-in
6796 packet support and various register changes.
6798 This now works to send and receive telemetry, as well as send APRS and
6801 Signed-off-by: Keith Packard <keithp@keithp.com>
6803 commit 7fea8b245cdccc1ec77aa559433952f339676473
6804 Author: Keith Packard <keithp@keithp.com>
6805 Date: Tue Oct 7 05:35:10 2014 +0200
6807 altos: Expose telemetry altitude macros even without GPS
6809 This allows for APRS testing in the new teledongle code
6811 Signed-off-by: Keith Packard <keithp@keithp.com>
6813 commit 484b530a16a54ca8fde412c3f466bfe7eed978cd
6814 Author: Keith Packard <keithp@keithp.com>
6815 Date: Tue Oct 7 05:32:00 2014 +0200
6817 altos: Mark STM ao_spi_send as taking const pointer
6819 We don't write to this, so let it be const for type checking
6821 Signed-off-by: Keith Packard <keithp@keithp.com>
6823 commit c17dff05b70d98e3193e8e68cc9599f3a30270b5
6824 Author: Keith Packard <keithp@keithp.com>
6825 Date: Fri Oct 24 19:10:45 2014 -0700
6827 ao-tools/ao-send-telem: Add verbose, fake and rate options
6829 Verbose dumps some data while sending packets.
6830 Fake sends constructed packets, once every 500ms.
6831 Rate sets the transmit bit rate.
6833 Signed-off-by: Keith Packard <keithp@keithp.com>
6835 commit e2562ee43b8558df0836217ea3a187b36e2669b3
6836 Author: Keith Packard <keithp@keithp.com>
6837 Date: Wed Oct 15 16:10:11 2014 -0700
6839 altosuilib: Try to detect the architecture when loading JNI lib
6841 Look at sun.arch.data.model and os.arch to try and load the right
6842 libaltos file the first time.
6844 Signed-off-by: Keith Packard <keithp@keithp.com>
6846 commit 88df7cd314269fa1debe226b49b7e4e9dc238d8e
6847 Author: Keith Packard <keithp@keithp.com>
6848 Date: Fri Oct 24 21:21:19 2014 -0700
6850 altoslib: synchronize access to serial debug output list
6852 This list is access by both the receiver and the monitor task, so it
6853 needs to be locked to prevent collisions.
6855 Signed-off-by: Keith Packard <keithp@keithp.com>
6857 commit 221824b038bf18ca43a38c82d18b0ae9586ba565
6858 Author: Bdale Garbee <bdale@gag.com>
6859 Date: Thu Oct 9 13:11:16 2014 -0600
6861 document pyro current limits in an appendix
6863 commit ffda6989e856e66a1bea253e82cb70f51ada3e7a
6864 Author: Keith Packard <keithp@keithp.com>
6865 Date: Sun Oct 5 00:07:10 2014 -0700
6867 altos: Add prototype TeleDongle v1.9 code
6869 Lights up the hardware, sends carrier and RDF tones. A bit more cc1200
6870 work to be done still.
6872 Signed-off-by: Keith Packard <keithp@keithp.com>
6874 commit 27a467d802a80a33ea20eb5cda2558d03caa2c00
6875 Author: Keith Packard <keithp@keithp.com>
6876 Date: Sun Oct 5 00:03:28 2014 -0700
6878 altos: Copy cc1120 driver to cc1200 driver and hack a bit
6880 The cc1200 is similar to the cc1120, although many registers have
6883 This driver can send a bare carrier and an RDF tone, but does not yet
6884 receive or transmit telemetry data.
6886 Signed-off-by: Keith Packard <keithp@keithp.com>
6888 commit 62628c8b429d06ee834f0b6511c430cbeaab9303
6889 Author: Keith Packard <keithp@keithp.com>
6890 Date: Sat Oct 4 00:30:54 2014 -0700
6892 altos: Fix syntax error with ao_log_mega change.
6894 Missed a semi-colon.
6896 Signed-off-by: Keith Packard <keithp@keithp.com>
6898 commit 00ae706dab6e8fddef4c5730a17c433a022228b7
6899 Author: Keith Packard <keithp@keithp.com>
6900 Date: Sat Oct 4 00:11:13 2014 -0700
6902 altoslib: Compute tilt angle from eeprom data
6904 This copies the computation of tilt angle from the firmware so that
6905 post-flight analysis can also show the data.
6907 This change also renames all of the imu values to make them easier to
6912 along roll length of the board
6913 across pitch across the board
6914 through yaw through the board.
6916 Signed-off-by: Keith Packard <keithp@keithp.com>
6918 commit a757fd5af53f5721a949181372548afa4757d6c9
6919 Author: Keith Packard <keithp@keithp.com>
6920 Date: Sat Oct 4 00:10:03 2014 -0700
6922 altosui: Update 'Imperial Units' checkbox when units change
6924 If you have two graphs running, make sure the imperial units
6927 Signed-off-by: Keith Packard <keithp@keithp.com>
6929 commit 656d8fe17532ca6c7d1d43996f187df2f14f5395
6930 Author: Keith Packard <keithp@keithp.com>
6931 Date: Sat Oct 4 00:07:39 2014 -0700
6933 altoslib: Deal with new Mega log format that has 32-bit gyro cal
6935 This adds parsing for the new log format type to get all 32 bits of
6936 the gyro calibration data.
6938 Signed-off-by: Keith Packard <keithp@keithp.com>
6940 commit 9521dc63671b69065d27fc1ccba6d20cc90643cb
6941 Author: Keith Packard <keithp@keithp.com>
6942 Date: Sat Oct 4 00:04:39 2014 -0700
6944 altos: Record 32-bits for gyro calibration values
6946 The gyro ground calibration values are scaled by 512 to provide a bit
6947 more precision for the computations. This means they don't fit in 16
6948 bits, so change the format of the flight log record. Also change the
6949 reported format so that AltosUI has a chance of figuring it out.
6951 Signed-off-by: Keith Packard <keithp@keithp.com>
6953 commit 95d9248da78f86240dbe77e2c206420dc509c9cf
6954 Author: Keith Packard <keithp@keithp.com>
6955 Date: Mon Sep 29 12:57:27 2014 -0700
6957 altosui: Check for map and stats table when changing units/fonts in graph
6959 AltosGraphUI wasn't making sure the map and stats tables were present
6960 before attempting to adjust font size and units.
6962 Signed-off-by: Keith Packard <keithp@keithp.com>
6964 commit 40c5535b65a75374fb1dbbd994c29324db814f5b
6965 Author: Keith Packard <keithp@keithp.com>
6966 Date: Mon Sep 29 12:56:04 2014 -0700
6968 altos: Handle antenna down in ao_flight_test
6970 Parse the Pad orientation config value and flip the accelerometer
6971 value back around in antenna down configuration.
6973 Signed-off-by: Keith Packard <keithp@keithp.com>
6975 commit b97a125a9f8bd9619833647a9b6aa6329103e136
6976 Author: Keith Packard <keithp@keithp.com>
6977 Date: Fri Sep 26 22:58:13 2014 -0700
6979 ao-bringup: Auto-select programmer for teledongle turnon
6981 Bdale's programmer is SN 100, Keith's is SN 186. Use the username to
6982 figure out which one to use.
6984 Signed-off-by: Keith Packard <keithp@keithp.com>
6986 commit b4eba3f3a58a9c35e3699ff14405b997c1318d91
6987 Author: Keith Packard <keithp@keithp.com>
6988 Date: Fri Sep 26 22:53:39 2014 -0700
6990 altos: Make sure we drop the SPI mutex when aborting cc1120 recv
6992 The cc1120 receive code is 'twisty', in that it acquires the SPI mutex
6993 in the middle of an interrupt handler so that it can quickly start the
6994 radio when the signal comes in. This means we have to be careful to
6995 drop that mutex in all paths which leave the receive code, including
6996 when the packet receive is aborted mid-way through the process.
6998 Signed-off-by: Keith Packard <keithp@keithp.com>
7000 commit 22661ba69b8919116092382f1f5aa0dc79d02cc9
7001 Author: Bdale Garbee <bdale@gag.com>
7002 Date: Sat Sep 13 17:56:51 2014 -0600
7004 store cal value correctly even when we didn't need to change it
7006 commit b0eb63205223e2982d0ded08503c3f128420270f
7007 Author: Keith Packard <keithp@keithp.com>
7008 Date: Sat Sep 13 15:59:18 2014 -0700
7010 altosdroid: Update notebook to reflect current status
7012 Signed-off-by: Keith Packard <keithp@keithp.com>
7014 commit 9dc426756742fb967fdd21e1fcec54edeb4b12ac
7015 Author: Keith Packard <keithp@keithp.com>
7016 Date: Sat Sep 13 15:52:56 2014 -0700
7018 altosui: Bring up main window when doing --replay or --graph
7020 This shows the main window when replaying or graphing files so that
7021 you can interact with that, changing the global configuration or doing
7024 Signed-off-by: Keith Packard <keithp@keithp.com>
7026 commit 75d5368cb2a95f3f7385952669a14765460f549d
7027 Author: Keith Packard <keithp@keithp.com>
7028 Date: Sat Sep 13 15:51:50 2014 -0700
7030 altosui: Fix --replay to run in realtime after boost
7032 I added the ability to rapidly replay files for AltosDroid to recover
7033 from a crash, but didn't change AltosUI to use realtime mode again.
7035 Signed-off-by: Keith Packard <keithp@keithp.com>
7037 commit 04b5cc37659b1b3d6b62f1ef17b17c0492434cba
7038 Author: Bdale Garbee <bdale@gag.com>
7039 Date: Sat Sep 13 16:37:42 2014 -0600
7041 reflect filename changes in LLC repo
7043 commit 93d1cedc94358ebf5c2af537a25a242f6c19954c
7044 Author: Keith Packard <keithp@keithp.com>
7045 Date: Sat Sep 13 15:23:40 2014 -0700
7047 altosdroid: Automatically sign the released version if the key is available
7049 Look in ~/altusmetrumllc for release.keystore and Passphrase and
7050 enable building and signing of the release binary.
7052 Signed-off-by: Keith Packard <keithp@keithp.com>
7054 commit 2731486c12678a7d3bd7ec79e74a2fcaf20845bd
7055 Author: Keith Packard <keithp@keithp.com>
7056 Date: Sat Sep 13 13:38:31 2014 -0700
7058 altosdroid: Update version code and name for 1.5
7060 Signed-off-by: Keith Packard <keithp@keithp.com>
7062 commit e151c144fcdb1da96e715f29c049dc4869e1d53d
7063 Author: Keith Packard <keithp@keithp.com>
7064 Date: Sat Sep 13 13:00:58 2014 -0700
7066 Mark master branch as past the 1.5 point
7068 Signed-off-by: Keith Packard <keithp@keithp.com>
7070 commit ff7c006e50515040d43399899fac26a3fe26d8a7
7071 Author: Bdale Garbee <bdale@gag.com>
7072 Date: Sat Sep 13 12:31:08 2014 -0600
7074 updated to reflect changes from 1.5 release
7076 commit 20d640ec504afbfdb69dba1b241d84af1e62abed
7077 Author: Keith Packard <keithp@keithp.com>
7078 Date: Fri Sep 12 20:58:26 2014 -0700
7080 ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
7082 The script lets you re-try each one when they fail, which is nice if
7083 you're hand-holding the setup.
7085 The TeleMetrum and TeleMega tests are adapted from the EasyMega tests
7086 and are hooked up to the turnon scripts.
7088 Signed-off-by: Keith Packard <keithp@keithp.com>
7090 commit e0077866138a1e29ede7181e39f04860b866543a
7091 Author: Keith Packard <keithp@keithp.com>
7092 Date: Fri Sep 12 20:57:05 2014 -0700
7094 ao-tools/ao-test-igniter: Remove bogus printf
7096 This must have been left over from testing; it prints "device (null)",
7097 which isn't very useful.
7099 Signed-off-by: Keith Packard <keithp@keithp.com>
7101 commit 6681d31929266fec9711b3d89a4f074cd2afcc6e
7102 Author: Keith Packard <keithp@keithp.com>
7103 Date: Fri Sep 12 20:56:29 2014 -0700
7105 ao-tools/ao-test-gps: Improve output formatting
7107 Add a newline before printing out the flags and sats at exit time
7109 Signed-off-by: Keith Packard <keithp@keithp.com>
7111 commit f2d045570d2cda0abde67a68506cb3fc2e119ec3
7112 Author: Keith Packard <keithp@keithp.com>
7113 Date: Fri Sep 12 17:22:37 2014 -0700
7115 ao-bringup: Use C version of ao-test-gps in test-telegps
7117 Signed-off-by: Keith Packard <keithp@keithp.com>
7119 commit d0e597789ac298b108ea04cc1a2c999bcf14bc9c
7120 Author: Keith Packard <keithp@keithp.com>
7121 Date: Fri Sep 12 17:22:03 2014 -0700
7123 ao-tools: Add ao-test-gps program
7125 This waits for GPS to report lock
7127 Signed-off-by: Keith Packard <keithp@keithp.com>
7129 commit def036794f1460a5457e6b86350712c336e296d6
7130 Author: Keith Packard <keithp@keithp.com>
7131 Date: Fri Sep 12 16:38:59 2014 -0700
7133 ao-bringup: Use C version of test-flash for telegps
7135 Signed-off-by: Keith Packard <keithp@keithp.com>
7137 commit 1630a8e458f174d6df1aa30ff30e3f02a10bdbf7
7138 Author: Keith Packard <keithp@keithp.com>
7139 Date: Thu Sep 11 19:59:58 2014 -0700
7141 altosui: Ignore built .desktop file
7143 Signed-off-by: Keith Packard <keithp@keithp.com>
7145 commit 807e62ccebc83eb6427a63431d06effa074e5e76
7146 Author: Keith Packard <keithp@keithp.com>
7147 Date: Thu Sep 11 19:56:13 2014 -0700
7149 altos: Make sure we don't beep out continuity twice in idle mode
7151 If the battery voltage report takes longer than the initialiation
7152 sequence, we could get to the state reporting after the state had
7153 switched from startup to idle. This would result in continuity being
7154 reported the first time through the loop. Then, as the state had
7155 already changed, we'd pass through the while test and go back to
7156 report continuity a second time.
7158 Fixed by using the state remembered before beeping out the voltage to
7159 decide whether to report the continuity.
7161 Signed-off-by: Keith Packard <keithp@keithp.com>
7163 commit d7ad490a33900a788b15d1600ebaa2a71e6f35ff
7164 Author: Keith Packard <keithp@keithp.com>
7165 Date: Thu Sep 11 15:57:21 2014 -0700
7167 altos: Add smaller altitude table file to .gitignore
7169 Signed-off-by: Keith Packard <keithp@keithp.com>
7171 commit 7ad8921b164103629b246c25860297454aa7ec6b
7172 Author: Keith Packard <keithp@keithp.com>
7173 Date: Thu Sep 11 15:56:14 2014 -0700
7175 altos/test: Add TMv2 test program to .gitignore
7177 commit 0cedc27e22a9fbc9ccfe1b403c84d728bb23220d
7178 Author: Keith Packard <keithp@keithp.com>
7179 Date: Thu Sep 11 15:00:25 2014 -0700
7181 altos: Fix ability to disable telemetry by setting interval to 0
7183 For non-zero telemetry intervals, the radio code limits the value
7184 based on the data rate. However, a zero interval means that telemetry
7185 should be entirely disabled, so that value should be left alone when
7188 Signed-off-by: Keith Packard <keithp@keithp.com>
7190 commit 6dafd7bf947d892e430cd565eb92a3366abb3604
7191 Author: Keith Packard <keithp@keithp.com>
7192 Date: Thu Sep 11 14:23:29 2014 -0700
7194 telegps: Was mis-configuring the 'Configure Device' dialog
7196 Make sure we show 'rate_label' instead of showing 'radio_enable_label'
7199 Signed-off-by: Keith Packard <keithp@keithp.com>
7201 commit 368c7d583380b4453f432d5a965a1e4c45a92f92
7202 Author: Keith Packard <keithp@keithp.com>
7203 Date: Thu Sep 11 14:14:07 2014 -0700
7205 altoslib: Stop re-loading previous flight when starting telemetry monitoring
7207 This feature is necessary on AltosDroid because there's no other UI
7208 for reloading an old flight. It's not useful on the desktop where you
7209 really just want to see new telemetry; old telemetry is availbale
7210 through the 'graph flight' or 'replay' mechanisms.
7212 AltosDroid uses a different class for reading telemetry data, so we
7213 can just remove this feature from altoslib at this point.
7215 Signed-off-by: Keith Packard <keithp@keithp.com>
7217 commit 2ee937b603b181bb24768eb4d0e2f918a5377fd3
7218 Author: Bdale Garbee <bdale@gag.com>
7219 Date: Wed Sep 10 01:29:56 2014 -0600
7221 use dh_installmime, which requires telling configure to stay out of the way
7223 commit 22e68da2cb3b0b42708876f1dde52dbfd0ce4bf7
7224 Author: Bdale Garbee <bdale@gag.com>
7225 Date: Wed Sep 10 00:26:10 2014 -0600
7229 commit 615b69b19557a9683eeb0475b30a053a35ca51ac
7230 Merge: a72b768 0365493
7231 Author: Bdale Garbee <bdale@gag.com>
7232 Date: Wed Sep 10 01:30:37 2014 -0600
7234 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7236 commit 036549343416183f973d00a86d897d4a368c1d6f
7237 Author: Keith Packard <keithp@keithp.com>
7238 Date: Wed Sep 10 00:03:53 2014 -0700
7240 configure: Add --disable-install-shared-mime-info option
7242 This inhibits the installation of the shared mime info data file and
7243 updating of the shared mime database. Necessary if you want to use a
7244 distribution-specific shared mime installation hook, like dh_installmime
7246 Signed-off-by: Keith Packard <keithp@keithp.com>
7248 commit 1992a1e3046a5414ce8d394e1cd8e5e6f6338d29
7249 Author: Keith Packard <keithp@keithp.com>
7250 Date: Tue Sep 9 23:43:10 2014 -0700
7252 .desktop: Use %F instead of %f in .desktop files
7254 %F is a list of files, %f is a single file. All of our tools can
7255 handle lists of files, so make the .desktop file reflect that.
7257 Signed-off-by: Keith Packard <keithp@keithp.com>
7259 commit a72b7683606d3e741043011c929482a0a168a5c9
7260 Author: Bdale Garbee <bdale@gag.com>
7261 Date: Tue Sep 9 23:44:45 2014 -0600
7263 more build dependencies for processing icons
7265 commit 1fb200d18cc385230b3af574816ec354682cc5c9
7266 Author: Keith Packard <keithp@keithp.com>
7267 Date: Tue Sep 9 23:00:14 2014 -0700
7269 icons: Use DESTDIR when updating mime/icon caches
7271 This is done in install-data-hook and needs to explicitly use DESTDIR
7273 Signed-off-by: Keith Packard <keithp@keithp.com>
7275 commit a8c799c48a52bf13466536db627b66bfe2a435cd
7276 Author: Keith Packard <keithp@keithp.com>
7277 Date: Tue Sep 9 09:38:03 2014 -0700
7279 altoslib/altosuilib: clean all versions of the .jar file
7281 When we switch libary versions, we want to remove the old ones; just
7282 have 'make clean' remove all versions of the libaries.
7284 Signed-off-by: Keith Packard <keithp@keithp.com>
7286 commit cef3be371cb3a9e481c2bd6abdf22c51953773f1
7287 Author: Keith Packard <keithp@keithp.com>
7288 Date: Tue Sep 9 09:37:13 2014 -0700
7290 altoslib/altosuilib: Add EasyMega support
7292 This makes flashing find the right files, and Monitor Idle show all of
7295 Signed-off-by: Keith Packard <keithp@keithp.com>
7297 commit 08a82617c53718055d97df4fa60f3e5051d65383
7298 Author: Keith Packard <keithp@keithp.com>
7299 Date: Tue Sep 9 09:09:22 2014 -0700
7301 altos/easymega: Set USB PID for EasyMega to 0x0028
7303 It was using 0x0023, which is for TeleMega. 0x0028 is what's listed in
7306 Signed-off-by: Keith Packard <keithp@keithp.com>
7308 commit 9d3ab4c78f79d659ce800def77bc441c95fa15be
7309 Author: Keith Packard <keithp@keithp.com>
7310 Date: Tue Sep 9 09:02:51 2014 -0700
7312 altoslib: Fix idle monitor parsing of MMA655x state
7314 There's no ':' after 'MMA655X value' in the output, and the parser
7315 returns 'true' on success, not false.
7317 With this, 'Monitor Idle' now reports correct accelerometer readings.
7319 Signed-off-by: Keith Packard <keithp@keithp.com>
7321 commit 2b7ba0a5be70ae1d661afb2592ce8a6bf660c793
7322 Author: Keith Packard <keithp@keithp.com>
7323 Date: Tue Sep 9 09:01:42 2014 -0700
7327 This should be the final firmware version for 1.5
7329 Signed-off-by: Keith Packard <keithp@keithp.com>
7331 commit 445d61c3810154193aebbf0f08f075ac8e107baf
7332 Author: Keith Packard <keithp@keithp.com>
7333 Date: Sat Sep 6 22:56:25 2014 -0700
7335 altosui: Include EasyMega firmware in fat release
7337 Signed-off-by: Keith Packard <keithp@keithp.com>
7339 commit f0d2d34f84980ab45ecedae17546f4d71e020c5e
7340 Merge: 8c212cd 6c812f1
7341 Author: Bdale Garbee <bdale@gag.com>
7342 Date: Sat Sep 6 23:42:47 2014 -0600
7344 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7346 commit 6c812f10761ec4ebf13e29ccef1d6c2c864f1158
7347 Author: Keith Packard <keithp@keithp.com>
7348 Date: Sat Sep 6 22:28:13 2014 -0700
7350 doc: Update for version 1.5 release
7352 Add stuff about EasyMega and telemetry rate configuration. Update
7353 screen shots as needed.
7355 Signed-off-by: Keith Packard <keithp@keithp.com>
7357 commit d83afa9320c24056469984873af0a3c70bee0962
7358 Author: Keith Packard <keithp@keithp.com>
7359 Date: Sat Sep 6 20:44:30 2014 -0700
7361 altos: Scale packet master receive delay by baud rate
7363 Increase the time we wait for return packets based on the remote
7366 Signed-off-by: Keith Packard <keithp@keithp.com>
7368 commit e7515e3a88d53c50dd9b962cc8f43ce5376ccd0b
7369 Author: Keith Packard <keithp@keithp.com>
7370 Date: Sat Sep 6 20:43:32 2014 -0700
7372 altoslib: Increase timeouts when using low baud rate remote protocol
7374 When using 2400 or 9600 baud remote link rates, we need to increase
7375 the packet timeout from 500ms to much longer values to avoid annoying
7376 the user with timeout warnings.
7378 Signed-off-by: Keith Packard <keithp@keithp.com>
7380 commit 46f08f8709c538f3fee8e166598f0bb930df6e3c
7381 Author: Keith Packard <keithp@keithp.com>
7382 Date: Sat Sep 6 20:41:58 2014 -0700
7384 altoslib: Update local callsign/baud rate when using remote protocol
7386 We've had code to synchronously update the local and remote radio
7387 frequencies when doing configuration over the remote link. This patch
7388 adds the same code when changing the call sign and baud rate.
7390 Signed-off-by: Keith Packard <keithp@keithp.com>
7392 commit f395bcaa620490954d4a42de9b4870bc12bedc91
7393 Author: Keith Packard <keithp@keithp.com>
7394 Date: Sat Sep 6 20:39:37 2014 -0700
7396 altos: Reduce deviation at 2400/9600 baud
7398 There's no reason to use 20.5kHz deviation at 2400 and 9600 baud, and
7399 if we get a better receiver, we'll want to use narrower deviation to
7400 have less bandwidth sucking noise into the radio. The new values are
7401 (nominally) 5.125kHz deviation for 9600 baud and 1.5kHz deviation for
7404 Signed-off-by: Keith Packard <keithp@keithp.com>
7406 commit 8c212cd5bfa03f71a31d84bd0051314e77d88461
7407 Merge: e9714e3 dd26ec2
7408 Author: Bdale Garbee <bdale@gag.com>
7409 Date: Sat Sep 6 13:41:36 2014 -0600
7411 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7414 ao-bringup/turnon_telemega
7416 commit e9714e34091abe657aa1b30aeda9466331aa39c1
7417 Author: Bdale Garbee <bdale@gag.com>
7418 Date: Sat Sep 6 13:40:59 2014 -0600
7420 tweaking test scripts
7422 commit dd26ec2e706bdd29090759deeb90090a0e3b74f0
7423 Author: Keith Packard <keithp@keithp.com>
7424 Date: Sat Sep 6 00:39:41 2014 -0700
7426 altosdroid: Mark completed items as 'done'
7429 Re-load data on restart
7430 Auto re-connect to TBT at correct freq
7432 Signed-off-by: Keith Packard <keithp@keithp.com>
7434 commit 18671803d078aa798b603c67b741c3ba4374f41d
7435 Author: Keith Packard <keithp@keithp.com>
7436 Date: Sat Sep 6 00:14:26 2014 -0700
7438 altosdroid: Add imperial unit support
7440 Provides a menu entry to switch units, changes all value displays to
7441 use the AltosLib units conversion code.
7443 Signed-off-by: Keith Packard <keithp@keithp.com>
7445 commit 2b2ebd2fee46158abd1ae050cd6d1040ead849a0
7446 Author: Keith Packard <keithp@keithp.com>
7447 Date: Fri Sep 5 23:10:07 2014 -0700
7449 altosdroid: Update tab contents before switching
7451 Make sure the new tab contents are updated before switching tabs so
7452 that the user doesn't see old stuff.
7454 Signed-off-by: Keith Packard <keithp@keithp.com>
7456 commit 08bbb1c3de73c9aaf920b11247eae544df6eac0c
7457 Author: Keith Packard <keithp@keithp.com>
7458 Date: Fri Sep 5 22:06:21 2014 -0700
7460 altosdroid: Ignore TelemetryService messages after service shutdown
7462 Messages may get delivered after the service has been shut down;
7465 Signed-off-by: Keith Packard <keithp@keithp.com>
7467 commit 101ac21f05a69bdeb07d423aa18017eca04fc47f
7468 Author: Keith Packard <keithp@keithp.com>
7469 Date: Thu Sep 4 11:28:40 2014 -0700
7471 altosdroid: add new TelemetryState.java
7473 Signed-off-by: Keith Packard <keithp@keithp.com>
7475 commit 2b03aca995b0151d7e820775f6a9d4afec462633
7476 Author: Keith Packard <keithp@keithp.com>
7477 Date: Wed Sep 3 22:59:09 2014 -0700
7479 altosui: Don't mark altimeter dirty when opening pyro panel
7481 Skip setting the UI dirty when filling in the pyro firing time value.
7483 Signed-off-by: Keith Packard <keithp@keithp.com>
7485 commit be38fb88d11bda1ba1caca38220773d3abcede19
7486 Author: Keith Packard <keithp@keithp.com>
7487 Date: Wed Sep 3 22:58:22 2014 -0700
7489 altos: Allow negative values for pyro configuration data
7491 All of the integer pyro configuration parameters may be negative, so
7492 parse that correctly.
7494 Signed-off-by: Keith Packard <keithp@keithp.com>
7496 commit 3842735e303f0bf6f46ed8cb659c92d8bb9bd137
7497 Author: Keith Packard <keithp@keithp.com>
7498 Date: Wed Sep 3 22:32:49 2014 -0700
7500 altosdroid: Use single object to pass data to UI
7502 Instead of having separate messages for each piece of telemetry state,
7503 package the whole mess up in one object and send it for any
7504 change. This simplifies tracking within the UI by avoiding corner
7505 cases during reconnect.
7507 Signed-off-by: Keith Packard <keithp@keithp.com>
7509 commit adc46e2f1346d98ef4f6c2351fef95fbc8ddf831
7510 Author: Keith Packard <keithp@keithp.com>
7511 Date: Wed Sep 3 22:12:15 2014 -0700
7513 altos/telefire: Add firing length to manual pad command
7515 This adds an optional length of time (in 1/10s of a second) to the
7516 ao_pad_manual function to enable testing of igniters without needing
7519 Signed-off-by: Keith Packard <keithp@keithp.com>
7521 commit b838a974d0dad43ff02060d8d913d9369eb20e96
7522 Author: Keith Packard <keithp@keithp.com>
7523 Date: Mon Sep 1 18:25:00 2014 -0500
7525 altosui: Fix 'pad' screen for TeleGPS
7527 Don't report pad position for TeleGPS
7529 Signed-off-by: Keith Packard <keithp@keithp.com>
7531 commit 7735cee871d02215517cb9d91cd552f003ca6a50
7532 Author: Keith Packard <keithp@keithp.com>
7533 Date: Mon Sep 1 18:23:42 2014 -0500
7535 altoslib: Catch a couple null pointers in AltosConfigTD
7537 When messing with TD, I hit a couple of paths that could try to
7538 dereference null pointers. Check for those.
7540 Signed-off-by: Keith Packard <keithp@keithp.com>
7542 commit 57f0ae384f3c206ea777dc7c93b594ae3901f354
7543 Author: Keith Packard <keithp@keithp.com>
7544 Date: Mon Sep 1 18:21:49 2014 -0500
7546 altoslib: Ignore extra AO_LOG_FLIGHT records from TeleGPS
7548 TeleGPS was inserting a spurious AO_LOG_FLIGHT record each time it
7549 turned on, which confused altoslib quite a bit.
7551 Signed-off-by: Keith Packard <keithp@keithp.com>
7553 commit a4202b4180e77e2a39ca071d3b8b8256ff0fc7b5
7554 Author: Keith Packard <keithp@keithp.com>
7555 Date: Mon Sep 1 18:12:29 2014 -0500
7557 altos: Don't add AO_LOG_FLIGHT to existing GPS logs
7559 When appending to a TeleGPS log, don't stick another flight value into
7560 the log. That just confuses the ground station software.
7562 Signed-off-by: Keith Packard <keithp@keithp.com>
7564 commit aa7dd289ee72f7a49a08ce0229c4e0e0404499d0
7565 Author: Keith Packard <keithp@keithp.com>
7566 Date: Sun Aug 31 00:28:15 2014 -0500
7568 altosdroid: reload previous log file at connect time
7570 Use the saved logfile to re-load the previous state at startup time.
7572 Signed-off-by: Keith Packard <keithp@keithp.com>
7574 commit 00a3eace5ea885205270137f190538b010fd679f
7575 Author: Keith Packard <keithp@keithp.com>
7576 Date: Sun Aug 31 00:27:54 2014 -0500
7578 altosdroid: Add missing preferences backend file
7580 Signed-off-by: Keith Packard <keithp@keithp.com>
7582 commit a5e348905a510bb2dcf6d7734f5681fb8338cd87
7583 Author: Keith Packard <keithp@keithp.com>
7584 Date: Sun Aug 31 00:11:28 2014 -0500
7586 altoslib: create logfiles preference object. check link in existing_data
7588 The logfiles preference hash wasn't getting created, resulting in
7591 When there was no link, don't try to load existing data.
7593 Signed-off-by: Keith Packard <keithp@keithp.com>
7595 commit bc3fbcb35090be3856284ccf4d908ebf39d02bec
7596 Author: Keith Packard <keithp@keithp.com>
7597 Date: Sun Aug 31 00:08:33 2014 -0500
7599 altosdroid: Add quit. Restart. Show freq in title.
7601 Add a quit button to menu.
7602 When restarting, reconnect to previous device.
7603 When connecting, set the freq/rate to previous values.
7605 Signed-off-by: Keith Packard <keithp@keithp.com>
7607 commit 0b70ea04e807c69a987d5976ab217f9f65fb1e09
7608 Author: Keith Packard <keithp@keithp.com>
7609 Date: Fri Aug 29 22:33:36 2014 -0500
7611 altosdroid: fixup fetching active device address
7613 Signed-off-by: Keith Packard <keithp@keithp.com>
7615 commit 0014addf3356bad1eff76cffc396fb120308646c
7616 Author: Keith Packard <keithp@keithp.com>
7617 Date: Fri Aug 29 22:08:43 2014 -0500
7619 altoslib: TeleMega telemetry pyro voltages are uint8
7621 Using int8 means that voltages over about 6V are reported incorrectly.
7623 Signed-off-by: Keith Packard <keithp@keithp.com>
7625 commit 810f9a4f79b0480973d84595140d3f8948ce26d9
7626 Author: Keith Packard <keithp@keithp.com>
7627 Date: Fri Aug 29 15:22:43 2014 -0500
7629 altosdroid: start restoring from log data on startup
7631 Remember which flight was last being received and reload that file
7633 Signed-off-by: Keith Packard <keithp@keithp.com>
7635 commit 5872bd10df14b47de0e541bff16d9220af0558aa
7636 Author: Keith Packard <keithp@keithp.com>
7637 Date: Fri Aug 29 15:12:38 2014 -0500
7639 altos: Make sure pyro remains valid during delay
7641 Keep checking pyro status while waiting for delay to expire to make
7642 sure nothing changes. Disable pyro channel if something does.
7644 Signed-off-by: Keith Packard <keithp@keithp.com>
7646 commit 54994d02a5ca5bb91512f31748a48a0140d3a640
7647 Author: Keith Packard <keithp@keithp.com>
7648 Date: Thu Aug 28 19:52:30 2014 -0700
7650 ao-bringup: Test EasyMega boards
7652 commit 3c9cb4836edd4811fcdbb6ebbd25eb507a2ef5b1
7653 Author: Keith Packard <keithp@keithp.com>
7654 Date: Mon Aug 18 10:57:26 2014 -0700
7656 ao-bringup: Use ao-cal-accel instead of cal-accel in turnon scripts
7658 Signed-off-by: Keith Packard <keithp@keithp.com>
7660 commit fac03ae9762f2af95b1ce5d99894173f9d9146f0
7661 Author: Keith Packard <keithp@keithp.com>
7662 Date: Mon Aug 18 10:53:04 2014 -0700
7664 Add ao-tools/ao-cal-accel
7666 This C version may be more reliable than the nickle version
7668 Signed-off-by: Keith Packard <keithp@keithp.com>
7670 commit b357544dd64f5b0f209c6cc6cb4fa392a2c3e1fa
7671 Author: Bdale Garbee <bdale@gag.com>
7672 Date: Mon Aug 18 11:25:32 2014 -0600
7674 turn echo back on after accel cal in turnon_telemetrum so rest is easier
7676 commit 44e389c31e5958c1a050fbe0dce5d7971a9d6a86
7677 Author: Keith Packard <keithp@keithp.com>
7678 Date: Sun Aug 17 21:03:12 2014 -0700
7680 altos: Add telerepeat-v1.0
7682 This uses TeleBT hardware to provide a telemetry repeater, receiving
7683 packets on one frequency and re-transmitting them on another.
7685 Signed-off-by: Keith Packard <keithp@keithp.com>
7687 commit 5a51efd7f9b49ffadc91ccaf7a0d69566301c009
7688 Author: Keith Packard <keithp@keithp.com>
7689 Date: Thu Jun 26 16:29:37 2014 -0700
7691 altosui: Make Windows java test "smarter"
7693 Or at least have it try more options, and then finally ask the user
7694 before downloading and installing java
7696 Signed-off-by: Keith Packard <keithp@keithp.com>
7698 commit bb7522acf040f41740ecd059e3d5d2480b652420
7699 Author: Keith Packard <keithp@keithp.com>
7700 Date: Sun Aug 17 20:59:45 2014 -0700
7702 telegps-v1.0: Provide one log and append to it
7704 Instead of creating per-flight logs, create a single log and append
7705 data to it each time TeleGPS is powered on. This avoids potentially
7706 running out of log space just because the device is powered off/on.
7708 Signed-off-by: Keith Packard <keithp@keithp.com>
7710 commit 1530c24cc75cdf9ba87c7e153ff28bf7beb4384c
7711 Author: Keith Packard <keithp@keithp.com>
7712 Date: Sun Aug 17 20:57:16 2014 -0700
7714 cc1111: Wait for internal flash write to complete
7716 This ensures that we don't try to start another write too soon.
7718 Signed-off-by: Keith Packard <keithp@keithp.com>
7720 commit 80e20b241359452028298567c76b2f644da5ad23
7721 Author: Keith Packard <keithp@keithp.com>
7722 Date: Sun Aug 17 20:56:22 2014 -0700
7724 Use -ldl when testing whether -m32 and -m64 builds work
7726 We only need -ldl, and not -lbluetooth now that libaltos uses dlopen
7727 on the bluetooth library
7729 Signed-off-by: Keith Packard <keithp@keithp.com>
7731 commit 830f31fd6dc280e7a63ba689b7a48beff5c49072
7732 Author: Keith Packard <keithp@keithp.com>
7733 Date: Sun Aug 17 20:55:34 2014 -0700
7735 ao-tools/ao-send-telem: Support sending TM v2 and Tm v2 telemetry
7737 Add state tracking so the telemetry sending code works.
7739 Signed-off-by: Keith Packard <keithp@keithp.com>
7741 commit 629b29b2718c174be9c811f224d0acf73fba4aff
7742 Author: Keith Packard <keithp@keithp.com>
7743 Date: Sun Aug 17 20:54:44 2014 -0700
7745 altoslib: Remove some debug printfs
7747 Signed-off-by: Keith Packard <keithp@keithp.com>
7749 commit ef1dd370564b99da033109f2fb5f7bf29711a13f
7750 Author: Keith Packard <keithp@keithp.com>
7751 Date: Sun Aug 17 20:53:31 2014 -0700
7753 altoslib: Improve performance of AltosLib.hexbytes
7755 On an android device, this function was spending quite a bit of time
7756 calling hexbyte. Open code the conversion to improve performance.
7758 Signed-off-by: Keith Packard <keithp@keithp.com>
7760 commit ee9f68ec877e3e5a67179f8c8abafbccc80eb804
7761 Author: Keith Packard <keithp@keithp.com>
7762 Date: Sun Aug 17 20:51:36 2014 -0700
7764 altoslib: Close serial port when AltosFlash fails to detect a target
7766 AltosDebug.check_connection raises an exception when the link fails,
7767 but the AltosFlash constructor didn't close the serial port in this
7768 case, causing the serial port to appear to be busy.
7770 Signed-off-by: Keith Packard <keithp@keithp.com>
7772 commit 76fd424e4624cb376ac2cf84b01b77599756680a
7773 Author: Keith Packard <keithp@keithp.com>
7774 Date: Sun Aug 17 20:50:38 2014 -0700
7776 altoslib: Handle link timeout in AltosDebug.read_memory
7778 link.get_reply returns null on a link error; don't crash in
7779 read_memory when this happens.
7781 Signed-off-by: Keith Packard <keithp@keithp.com>
7783 commit 935f769fee351545622e223a283fca64608ca410
7784 Author: Keith Packard <keithp@keithp.com>
7785 Date: Sun Aug 17 20:49:27 2014 -0700
7787 altoslib: Parse 'Log fixed:' configuration value
7789 TeleGPS holds a single flight record and constantly appends data to it
7790 instead of having separate flight records on the board. It reports
7791 'Log fixed: 1' to let AltosLib know that the size of the per-flight
7792 log is not configurable.
7794 Signed-off-by: Keith Packard <keithp@keithp.com>
7796 commit 59dfe661fcb504f390d9726378c676f2b5b005f3
7797 Author: Keith Packard <keithp@keithp.com>
7798 Date: Sun Aug 17 20:48:23 2014 -0700
7800 altosdroid: Skip updating hidden UI elements
7802 Instead of updating everything in the UI, only update the visible UI
7803 elements to save a bunch of computation.
7805 Signed-off-by: Keith Packard <keithp@keithp.com>
7807 commit b1f1844aa514893228080704da3b3ccf855bda1e
7808 Author: Keith Packard <keithp@keithp.com>
7809 Date: Sun Aug 17 20:46:48 2014 -0700
7811 altosdroid: Add telemetry rate support
7813 Provides a menu to select the receiver telemetry bit rate
7815 Signed-off-by: Keith Packard <keithp@keithp.com>
7817 commit e935ebe55705cb0506aac0859583d54fd8e5ca46
7818 Author: Keith Packard <keithp@keithp.com>
7819 Date: Thu Aug 14 19:03:29 2014 -0700
7821 altos: Report additional pyro channels via beeper
7823 Send a beep for each additional pyro channel, low for no igniter, mid
7824 for igniter. Does not change the reporting for the apogee/main channels.
7826 Signed-off-by: Keith Packard <keithp@keithp.com>
7828 commit c4dd29fcbbb93e991993a0aa444748dba4ee7dde
7829 Author: Keith Packard <keithp@keithp.com>
7830 Date: Tue Jul 22 14:18:06 2014 -0700
7832 altos: Document which TeleFire alarm pins are which
7834 Signed-off-by: Keith Packard <keithp@keithp.com>
7836 commit d8e2b661e895fc59ded002a02191dcccce75f548
7837 Author: Keith Packard <keithp@keithp.com>
7838 Date: Sat Jul 19 22:35:30 2014 -0700
7840 altos: Have MicroKite just start recording at startup
7842 This avoids having MicroKite try to detect boost and has it just start
7843 recording data immediately.
7845 Signed-off-by: Keith Packard <keithp@keithp.com>
7847 commit 59976c44d1b6ee6505cfa4efd9a26ec4302f6c33
7848 Author: Bdale Garbee <bdale@gag.com>
7849 Date: Thu Aug 14 18:16:14 2014 -0600
7851 change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile
7853 commit 4828be0ca5252ac9cd6061209385dcd6c4c57965
7854 Merge: 17e894d 165b7dc
7855 Author: Bdale Garbee <bdale@gag.com>
7856 Date: Thu Aug 14 17:08:36 2014 -0600
7858 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
7860 commit 165b7dcf6fba90b15ff32b891cba4b9111c1965b
7861 Author: Keith Packard <keithp@keithp.com>
7862 Date: Wed Jul 16 17:13:25 2014 -0700
7864 altoslib: Handle TeleGPS files for KML export
7866 TeleGPS files had state values that couldn't be converted to colors,
7867 which resulted in a truncated file that wasn't much use for anything.
7869 Signed-off-by: Keith Packard <keithp@keithp.com>
7871 commit 17e894d1b65231d07df009bc4e8ca92864ccf790
7872 Author: Bdale Garbee <bdale@gag.com>
7873 Date: Tue Jul 15 23:15:50 2014 -0600
7877 commit ec7ceb607f5ba7e1ed5cfd32b7a452a5f364b095
7878 Author: Keith Packard <keithp@keithp.com>
7879 Date: Tue Jul 15 00:44:14 2014 -0700
7881 linux-fat: Fix up fat linux install icons, mime types and .desktop files
7883 use the standard xdg utilities to install mime type and .desktop
7884 files. The standard xdg icon installer doesn't handle svg icons, so we
7885 have to do those manually.
7887 With this patch, xfce, gnome3 and kde4 all place the applications in
7888 user-visible menus, display correct file icons and launch correct
7889 applications for our file types.
7891 Signed-off-by: Keith Packard <keithp@keithp.com>
7893 commit fb914d37018a585a879161483609d3c0be556d1e
7894 Author: Keith Packard <keithp@keithp.com>
7895 Date: Mon Jul 14 02:32:03 2014 -0700
7897 altosuilib: Fix minor scan UI nits
7899 Wasn't computing geometry correctly and overlapped the 2400 baud entry
7900 with the list of scan results.
7902 Was not saving the telemetry rate/telemetry style when switching to
7903 monitor mode, which caused the new monitor to come up with the wrong values.
7905 Signed-off-by: Keith Packard <keithp@keithp.com>
7907 commit 54b58e925e27e87bf2903678f87b7544ee2e8167
7908 Author: Keith Packard <keithp@keithp.com>
7909 Date: Mon Jul 14 00:46:41 2014 -0700
7911 Set version to 1.4.9.2
7913 commit 9e9151c3b4bb9ce329e1b44440a7aceb9f39b9a0
7914 Author: Keith Packard <keithp@keithp.com>
7915 Date: Mon Jul 14 00:45:13 2014 -0700
7917 altoslib: Parse eeprom 'altitude-32' fields
7919 This lets us tell if the altimeter supports 32-bit GPS altitudes in
7922 Signed-off-by: Keith Packard <keithp@keithp.com>
7924 commit 0fd867f504dd7df62e95da98ded511bb7b9e4c66
7925 Author: Keith Packard <keithp@keithp.com>
7926 Date: Sun Jul 13 20:44:39 2014 -0700
7928 altos/test: Build TeleMetrumV2 flight test variant
7930 Parses TeleMetrumV2 eeprom files and runs the TeleMetrumV2 flight code.
7932 Signed-off-by: Keith Packard <keithp@keithp.com>
7934 commit 50aec54bdc35962145eff9b465f9cd7b3d9fea0b
7935 Author: Keith Packard <keithp@keithp.com>
7936 Date: Sun Jul 13 20:43:27 2014 -0700
7938 altos: Make ao_gps_print deal with telem containing 32-bit altitude values
7940 ao_gps_print is used with new telem packets from a few places; use
7941 AO_TELEMETRY_LOCATION_ALTITUDE when necessary.
7943 Signed-off-by: Keith Packard <keithp@keithp.com>
7945 commit 6c3d09bf40f2af6e8722f33a70b41e5d94ceaf9f
7946 Author: Keith Packard <keithp@keithp.com>
7947 Date: Sun Jul 13 20:42:41 2014 -0700
7949 altos: Interrupt radio receive when changing data rate
7951 This aborts any pending radio receive when changing the data rate so
7952 that the radio can be reprogrammed to receive at the correct rate.
7954 Signed-off-by: Keith Packard <keithp@keithp.com>
7956 commit 5d1adc6775a66633661af747bc4176e06f97630f
7957 Author: Keith Packard <keithp@keithp.com>
7958 Date: Sun Jul 13 20:41:36 2014 -0700
7960 ao-tools: Add a few GPS telem/eeprom constants
7962 These make it possible to encode/decode GPS data from telemetry and
7965 Signed-off-by: Keith Packard <keithp@keithp.com>
7967 commit 6c9daa4f471ac90ffce3bfe8876c9008f79a5b7f
7968 Author: Keith Packard <keithp@keithp.com>
7969 Date: Sun Jul 13 20:40:40 2014 -0700
7971 ao-tools: Provide altitude to temperature conversion function
7973 This takes altitude and computes the 'normal' temperature for
7976 Signed-off-by: Keith Packard <keithp@keithp.com>
7978 commit e447e1e5c90d3fc1be9c5a1c966c7c688a87ba18
7979 Author: Keith Packard <keithp@keithp.com>
7980 Date: Sun Jul 13 11:06:29 2014 -0700
7982 ao-tools: Add TMv2 and Tgps log formats to cc.h
7984 Signed-off-by: Keith Packard <keithp@keithp.com>
7986 commit a60ba449ec237ad3b8dade9dcea603b349dbccb1
7987 Author: Keith Packard <keithp@keithp.com>
7988 Date: Sat Jul 12 23:52:05 2014 -0700
7990 altos/telefire,telelco: Add HAS_RADIO_RATE to launch system software
7992 This lets us set the rate to a lower value to improve range. 9600 baud
7993 works great; 2400 baud makes the initial search take a long time.
7995 Signed-off-by: Keith Packard <keithp@keithp.com>
7997 commit fa155693282746861b227afd6cbccc83dfd1bbed
7998 Author: Keith Packard <keithp@keithp.com>
7999 Date: Thu Jul 10 21:27:30 2014 -0700
8001 telegps: Missing function in TeleGPSConfigUI
8003 set_altitude_32 was added to the abstract class but not here.
8005 Signed-off-by: Keith Packard <keithp@keithp.com>
8007 commit 405626971b47d4d4031312232bf13ad3d4bace7f
8008 Author: Keith Packard <keithp@keithp.com>
8009 Date: Thu Jul 10 21:13:49 2014 -0700
8011 libaltos: typo in libaltos broke the build
8013 When converting this to use dlopen, I mis-typed the name hci_read_remote_name
8015 Signed-off-by: Keith Packard <keithp@keithp.com>
8017 commit 5f5b03879d9daa68a56498b45ae87a804cb1926b
8018 Author: Keith Packard <keithp@keithp.com>
8019 Date: Thu Jul 10 18:43:31 2014 -0700
8021 altosui: Don't show bluetooth UI bits on mac/windows
8023 This just confuses people into thinking that bluetooth is supported on
8026 Signed-off-by: Keith Packard <keithp@keithp.com>
8028 commit aac3fdce54233993c91d326df3732a7c448ac54a
8029 Author: Keith Packard <keithp@keithp.com>
8030 Date: Thu Jul 10 18:42:37 2014 -0700
8032 libaltos: Bind to libbluetooth at runtime on demand
8034 This lets us reliably start and run without libbluetooth present.
8036 Signed-off-by: Keith Packard <keithp@keithp.com>
8038 commit 59702e5ff8d0522b0aa9dcca863309eaafbcda09
8039 Author: Keith Packard <keithp@keithp.com>
8040 Date: Thu Jul 10 17:27:43 2014 -0700
8042 altoslib: Extend telemetry heights from 16 to 32 bits
8044 Uses the GPS data and/or previous kalman data to compute the upper 16
8045 bits of the truncated telemetry altitude value.
8047 Signed-off-by: Keith Packard <keithp@keithp.com>
8049 commit 6dc58c63d202e918f16d5fbe9b188d422edcdd9c
8050 Author: Keith Packard <keithp@keithp.com>
8051 Date: Thu Jul 10 17:26:19 2014 -0700
8053 altosui: Fix the 'Graph' button on the landed tab
8055 It hasn't been getting enabled since the state tabs were rewritten.
8057 Signed-off-by: Keith Packard <keithp@keithp.com>
8059 commit 013e9ccfbe76dc46e8c69ea314950bed83d9a39f
8060 Author: Keith Packard <keithp@keithp.com>
8061 Date: Thu Jul 10 17:18:38 2014 -0700
8063 altos: Use 32-bits for flight state data (alt/speed/accel)
8065 Stores 32-bits for all of the flight parameters. Uses 64-bit
8066 intermediates for kalman computation.
8068 Signed-off-by: Keith Packard <keithp@keithp.com>
8070 commit 31ae24b5da3e198e7555ea3768d3cbdec3a28a5f
8071 Author: Keith Packard <keithp@keithp.com>
8072 Date: Thu Jul 10 17:15:09 2014 -0700
8074 altos: Record pdop value in TeleMetrumV2 log
8076 There's only one byte free, so we'll record the pdop value
8078 Signed-off-by: Keith Packard <keithp@keithp.com>
8080 commit 47e62bb26984f6c84660c1d0451f77c2d6ad7e5a
8081 Author: Keith Packard <keithp@keithp.com>
8082 Date: Thu Jul 10 17:13:09 2014 -0700
8084 altos: Scale DOP values by 10 in GPS drivers
8086 sky traq was scaling by 5, ublox was scaling by 100.
8088 Signed-off-by: Keith Packard <keithp@keithp.com>
8090 commit ed2a08c50d6b8ebcc8c1d2f15e73c1f2a1e25041
8091 Author: Keith Packard <keithp@keithp.com>
8092 Date: Thu Jul 10 17:10:49 2014 -0700
8094 altoslib: Handle wide GPS altitude values in eeprom and telemetry
8096 Detect when the wider data is present and handle it correctly
8098 Signed-off-by: Keith Packard <keithp@keithp.com>
8100 commit 34d5be68ca23e8beb05db9a480faef63ecc911d0
8101 Author: Keith Packard <keithp@keithp.com>
8102 Date: Thu Jul 10 17:07:48 2014 -0700
8104 altos: Extend GPS altitudes to at least 24 bits everywhere
8106 Telemetry gets a special 'mode' flag indicating that 24-bit data is
8107 present; log files get new data and log readers are expected to detect
8108 that via the firmware version number.
8110 Signed-off-by: Keith Packard <keithp@keithp.com>
8112 commit 0d044af0c5025a63026d05adcab68f265f179668
8113 Author: Keith Packard <keithp@keithp.com>
8114 Date: Thu Jul 10 16:19:52 2014 -0700
8116 altosuilib: Allow for unitless axes in graphs
8118 DOP values have no units.
8120 Signed-off-by: Keith Packard <keithp@keithp.com>
8122 commit a2f44fa867b17a0f1c1ee9aa9b99ecaa102a361b
8123 Author: Keith Packard <keithp@keithp.com>
8124 Date: Thu Jul 10 16:19:34 2014 -0700
8126 altosuilib: Add GPS DOP values to info table
8128 Signed-off-by: Keith Packard <keithp@keithp.com>
8130 commit 61cbad00b68d9f4f2fed7b76132433e263966952
8131 Author: Keith Packard <keithp@keithp.com>
8132 Date: Thu Jul 10 16:19:17 2014 -0700
8134 altosuilib: Add GPS DOP values to graph
8136 Signed-off-by: Keith Packard <keithp@keithp.com>
8138 commit 9dafabd77676e08da4067cd405b6f03bf8d8ff85
8139 Author: Keith Packard <keithp@keithp.com>
8140 Date: Thu Jul 10 16:17:56 2014 -0700
8142 altoslib: Ensure CSV output is consistent
8144 Scan entire flight to figure out which columns to include before
8145 outputing header or data. Limit data output to values which are valid.
8147 Signed-off-by: Keith Packard <keithp@keithp.com>
8149 commit b8fa4e9a077e8e04b922d0c434c139ad0a57ee66
8150 Author: Keith Packard <keithp@keithp.com>
8151 Date: Thu Jul 10 16:15:52 2014 -0700
8153 altoslib: Clean up GPS DOP support in AltosState
8155 Parse out hdop/pdop/vdop from telem and eeprom. Deal with legacy
8156 eeprom files that have dop/100 instead of dop/10 values.
8158 Clear state DOP values to MISSING at startup
8160 Signed-off-by: Keith Packard <keithp@keithp.com>
8162 commit 6f2a4c610dfacbf500650db0eeeca6623bb49c5c
8163 Author: Keith Packard <keithp@keithp.com>
8164 Date: Thu Jul 10 00:26:55 2014 -0700
8166 micropeak/altosui/telegps: Fix icon file names
8168 The icon file names are now structured to have an organization name
8169 and application name component. This should avoid collisions with
8170 other packages when the icon files are installed in a shared
8171 directory, as on Linux. Within the Java .jar file, the new names need
8172 to be correctly referenced or we won't find them.
8174 Signed-off-by: Keith Packard <keithp@keithp.com>
8176 commit 1684291ba9a4f3bc2828e7b079ac27efcba6a163
8177 Author: Keith Packard <keithp@keithp.com>
8178 Date: Tue Jul 8 23:47:09 2014 -0700
8180 altos/telemini-v2.0: Enable beep config and radio rate config
8182 use the smaller pa to altitude table to make room for the new code
8184 Signed-off-by: Keith Packard <keithp@keithp.com>
8186 commit d926ccfbd4596eb3f981d2fcf8f6fc6ccc427db6
8187 Author: Keith Packard <keithp@keithp.com>
8188 Date: Tue Jul 8 23:46:24 2014 -0700
8190 altos: Add smaller pa to altitude table for TeleMini
8192 TeleMini doesn't have space for the larger table, and the smaller one
8193 isn't that much less accurate at lower altitudes.
8195 Signed-off-by: Keith Packard <keithp@keithp.com>
8197 commit 1a55cbe1923280f7009c13d5eb5b2ccac89219c2
8198 Author: Keith Packard <keithp@keithp.com>
8199 Date: Tue Jul 8 23:45:10 2014 -0700
8201 altos/telemini-v2.0: Add memory decorations to new telemetry variables
8203 This lets TeleMini-v2.0 compile.
8205 Signed-off-by: Keith Packard <keithp@keithp.com>
8207 commit 95f3a2825377bdb6737446df051c069d58f42d08
8208 Author: Keith Packard <keithp@keithp.com>
8209 Date: Tue Jul 8 23:43:31 2014 -0700
8211 altosui: Hide inactive altimeter configuration entries
8213 Instead of disabling them, just hide them so that entries that do not
8214 apply to a particular device won't get shown at all.
8216 Signed-off-by: Keith Packard <keithp@keithp.com>
8218 commit 78db9e350db104da87e0fe4b72aa41bf6cf45e1d
8219 Author: Keith Packard <keithp@keithp.com>
8220 Date: Sun Jul 6 20:10:21 2014 -0700
8222 Bump version to 1.4.9.1 -- on the way to 1.5
8224 commit d1527a5457210eb914312cf8857bfb88982a8462
8225 Author: Keith Packard <keithp@keithp.com>
8226 Date: Sun Jul 6 12:35:13 2014 -0700
8228 Add support for the "kite" micropeak variant
8230 This uses a 100m 'launch detect' altitude and logs data every 19.2s
8231 instead of every .192s.
8233 Signed-off-by: Keith Packard <keithp@keithp.com>
8235 commit f02cc3eec53e9d703837dad55ec2e6625b192588
8236 Author: Keith Packard <keithp@keithp.com>
8237 Date: Sat Jul 5 00:16:57 2014 -0700
8239 telegps: Support variable telemetry rate
8241 Add combo box to monitoring window and device configuration.
8243 Signed-off-by: Keith Packard <keithp@keithp.com>
8245 commit efb86669b5a74f244e2218f3385db633c36208af
8246 Author: Keith Packard <keithp@keithp.com>
8247 Date: Fri Jul 4 23:41:16 2014 -0700
8249 altosui: Support telemetry data rates
8251 Add combo box to flight UI and flight hardware configuration UIs
8252 Add telemetry rate to the TD/TBT config dialog
8254 Signed-off-by: Keith Packard <keithp@keithp.com>
8256 commit 9557a24b02911a93d74ee29ce359e40266cb4fed
8257 Author: Keith Packard <keithp@keithp.com>
8258 Date: Fri Jul 4 23:57:42 2014 -0700
8260 altosuilib: Add telemetry rate to Scan UI
8262 Let the user scan for multiple data rates as well as telemetry formats
8265 Signed-off-by: Keith Packard <keithp@keithp.com>
8267 commit 55e6558fa7cb23fb1363a86c83fbd6abf67ea324
8268 Author: Keith Packard <keithp@keithp.com>
8269 Date: Wed Jul 2 22:48:13 2014 -0700
8271 altoslib: Support multiple telemetry rates
8273 Altos now supports 2400 and 9600 baud in addition to the classic 38400
8274 baud rate. Add support to altoslib for these as well
8276 Signed-off-by: Keith Packard <keithp@keithp.com>
8278 commit 292cb8380b478542555b5f370e8252eafa2f74ac
8279 Author: Keith Packard <keithp@keithp.com>
8280 Date: Sat Jul 5 00:04:06 2014 -0700
8282 altos: Rework packet receive for cc1120
8284 Instead of blocking on PQT, just set up the receiver to start going
8285 and when the first bit interrupt comes in, grab the SPI bus if
8286 possible and configure it for reception. This improves sensitivity in
8287 the radio by a significant amount while making the code conceptually a
8290 Signed-off-by: Keith Packard <keithp@keithp.com>
8292 commit e0ee2ac6bc68b73e13bf34fac3ffd4a3b79dce98
8293 Author: Keith Packard <keithp@keithp.com>
8294 Date: Wed Jul 2 22:34:48 2014 -0700
8296 altos: Add telemetry rate support to CC1120 driver
8298 This supports the new 2400 and 9600 baud rates
8300 Signed-off-by: Keith Packard <keithp@keithp.com>
8302 commit 91461251f3aa8e1b37a3456f8fb94ab16bc0bec2
8303 Author: Keith Packard <keithp@keithp.com>
8304 Date: Fri Jul 4 23:42:30 2014 -0700
8306 altos: Packet reception tuning for cc1120 driver
8308 This adjusts the cc1120 receive parameters to increase sensitivity at
8309 the expense of reporting many more invalid packets to the UI.
8311 Signed-off-by: Keith Packard <keithp@keithp.com>
8313 commit 8935e29e5aa9c01cd00b275a35dd7b99c00980c3
8314 Author: Keith Packard <keithp@keithp.com>
8315 Date: Wed Jul 2 22:41:20 2014 -0700
8317 altos: Add 2400 and 9600 baud telemetry support to cc115l driver
8319 Signed-off-by: Keith Packard <keithp@keithp.com>
8321 commit aba1703a1cff3da001d64bf2d15a591816e3350e
8322 Author: Keith Packard <keithp@keithp.com>
8323 Date: Wed Jul 2 22:31:59 2014 -0700
8325 altos/cc1111: Add 2400 and 9600 baud telemetry rate support
8327 Signed-off-by: Keith Packard <keithp@keithp.com>
8329 commit c20ddde2f9eb0ad8dbb982e9d0cbe91639160a34
8330 Author: Keith Packard <keithp@keithp.com>
8331 Date: Wed Jul 2 22:30:23 2014 -0700
8333 altos/cc1111: Adjust receive parameters to improve sensitivity
8335 This removes the packet quality test and carrier sense tests when
8336 deciding whether to start decoding a packet. This lets more bad
8337 packets through, but the CRC check catches those and now we're
8338 regularly receiving packets down to -110 or even -112 dBm. Before this
8339 change, we'd rarely see packets as low as -105dBm
8341 Signed-off-by: Keith Packard <keithp@keithp.com>
8343 commit ea5887027e7a39da2b7d84a142d74950b7a24703
8344 Author: Keith Packard <keithp@keithp.com>
8345 Date: Sat Jul 5 00:09:25 2014 -0700
8347 altos: Call ao_telemetry_reset_interval when telemetry rate changes
8349 This lets the radio code adjust the telemetry packet sending pattern
8350 when the data rate changes.
8352 Signed-off-by: Keith Packard <keithp@keithp.com>
8354 commit 214a38eb2b084baec526aa42016eddb954038639
8355 Author: Keith Packard <keithp@keithp.com>
8356 Date: Wed Jul 2 22:44:07 2014 -0700
8358 altos: Add config support for 2400 and 9600 baud telemetry rates
8360 Signed-off-by: Keith Packard <keithp@keithp.com>
8362 commit 0605b5a1cdff5cfd71fc9ef3161a62d74a1124b4
8363 Author: Keith Packard <keithp@keithp.com>
8364 Date: Wed Jul 2 22:42:10 2014 -0700
8366 altos: Add defines for 2400 and 9600 baud telemetry rates
8368 Signed-off-by: Keith Packard <keithp@keithp.com>
8370 commit f8567a7be7ccd5dcc57ab65e63efe45e62008127
8371 Author: Keith Packard <keithp@keithp.com>
8372 Date: Fri Jul 4 23:26:57 2014 -0700
8374 altos: Reduce configuration data telemetry to once per 5 seconds
8376 This data is constant, so we don't need to send it very often. Once
8377 every five seconds should be plenty.
8379 Signed-off-by: Keith Packard <keithp@keithp.com>
8381 commit 657d455a2fad36193e6b3a7037d9ba7f09ae1168
8382 Author: Keith Packard <keithp@keithp.com>
8383 Date: Wed Jul 2 22:46:07 2014 -0700
8385 altos: Use TeleMetrum v1.9 board for MegaDongle experiments
8387 This configures the MegaDongle v0.1 directory to use the pin
8388 assignments in TeleMetrum v1.9 boards.
8390 Signed-off-by: Keith Packard <keithp@keithp.com>
8392 commit 48508479b0f6f8d6e73db1cae8ee8acdaba022d8
8393 Author: Keith Packard <keithp@keithp.com>
8394 Date: Wed Jul 2 22:45:01 2014 -0700
8396 altos: Stop sticking cc1111 firmware in src directory
8398 This just clutters src.
8400 Signed-off-by: Keith Packard <keithp@keithp.com>
8402 commit 500353ec83af0da7fce3d67f2707f4725b1f50ba
8403 Author: Keith Packard <keithp@keithp.com>
8404 Date: Wed Jul 2 22:42:43 2014 -0700
8406 altos: ao_rssi subsystem needs to use AO_LED_TYPE instead of uint8_t
8408 Signed-off-by: Keith Packard <keithp@keithp.com>
8410 commit cb15cb8db5ef570b57f89d4e58734554542f99ff
8411 Author: Keith Packard <keithp@keithp.com>
8412 Date: Fri Jul 4 23:22:20 2014 -0700
8414 altosuilib: Remove debug printfs from map cache
8418 Signed-off-by: Keith Packard <keithp@keithp.com>
8420 commit 2e99ff2c99f5d4a2fa196507e794c690665ab39e
8421 Author: Keith Packard <keithp@keithp.com>
8422 Date: Fri Jul 4 23:20:51 2014 -0700
8424 altoslib: Preserve receiver_serial across state reset for new transmitter
8426 When the transmitter serial or flight number changes, we re-init the
8427 state information, but we want to preserve the receiver serial number
8428 so that the log file has that in the name
8430 Signed-off-by: Keith Packard <keithp@keithp.com>
8432 commit d6e64790287d684cb9b70c67fa270825932cc020
8433 Author: Keith Packard <keithp@keithp.com>
8434 Date: Wed Jun 25 13:50:54 2014 -0700
8436 altoslib: Disable telemetry while getting config data
8438 We're seeing some log files created without a suitable -via- number
8439 included. My hypothesis is that incoming telemetry is getting
8440 interleaved with the configuration data containing the serial
8441 number. This change simply disables telemetry while retrieving the
8442 configuration data to try and keep that from happening.
8444 Signed-off-by: Keith Packard <keithp@keithp.com>
8446 commit 98c3c3f7edd58358939f7dacf5b8f4c336712f5b
8447 Author: Keith Packard <keithp@keithp.com>
8448 Date: Fri Jul 4 23:38:53 2014 -0700
8450 altosui/telegps: Undo the frequency/telemetry menu changes
8452 Using menus for these items isn't what we want; we want to show the
8453 current value on the screen, which is what a combo box is for. Switch
8454 back to those and remove the frequency and telemetry config from the
8455 TeleGPS menu bar so that Mac OS X is happy.
8457 Signed-off-by: Keith Packard <keithp@keithp.com>
8459 commit 505c6a1f8b8d68fe6f74dcb4428c860157fae3de
8460 Author: Bdale Garbee <bdale@gag.com>
8461 Date: Wed Jun 25 13:37:56 2014 -0600
8463 note need to push the updated repo with production binaries during release
8465 commit 75db560e2c9fbb2889db507acc93e889bf15bc2a
8466 Author: Bdale Garbee <bdale@gag.com>
8467 Date: Tue Jun 24 22:43:04 2014 -0600
8469 Windows sucks, hard .. make sure filenames are legal in .mdwn files
8471 commit 61ca8493566d5ea0da379970ab94f80a462dd368
8472 Author: Bdale Garbee <bdale@gag.com>
8473 Date: Tue Jun 24 22:35:43 2014 -0600
8475 update Releasing file based on learnings from 1.4.1 release
8477 commit 424112349d54bb6360403683f8012b83f49220be
8478 Author: Keith Packard <keithp@keithp.com>
8479 Date: Tue Jun 24 20:57:29 2014 -0700
8481 telegps: Disable tracker config when not available
8483 Tracker motion and interval were both left enabled even when the
8484 device being configured didn't support them. Disable them like other
8487 Signed-off-by: Keith Packard <keithp@keithp.com>
8489 commit 7427f8bac7b3743ce0ab990612bf7168b95e22f9
8490 Author: Keith Packard <keithp@keithp.com>
8491 Date: Tue Jun 24 20:52:34 2014 -0700
8493 altosui: Don't show the tracker motion value when switching units
8495 The tracker value was left enabled when hidden; the logic for deciding
8496 whether to update it with new information used only the enabled state,
8497 not the visible state. Set both states when hiding it to keep things
8500 Signed-off-by: Keith Packard <keithp@keithp.com>
8502 commit 6cb5955ab5aa3b42a507c4a02812cb5569b8562b
8503 Author: Keith Packard <keithp@keithp.com>
8504 Date: Fri Jun 20 11:56:58 2014 -0700
8506 Add note about including Google maps API key
8508 Signed-off-by: Keith Packard <keithp@keithp.com>
8510 commit f95b0e03c75d09e8ff4dbf9083cd3c8a30fdc4e6
8511 Author: Keith Packard <keithp@keithp.com>
8512 Date: Fri Jun 20 11:51:11 2014 -0700
8514 Add 1.4.1 release notes
8516 Signed-off-by: Keith Packard <keithp@keithp.com>
8518 commit b2c5f7d10265794a5778546f2e3eca7d763eab56
8519 Author: Keith Packard <keithp@keithp.com>
8520 Date: Tue Jun 24 20:31:50 2014 -0700
8522 Clean all .desktop files, ignore them too
8524 All .desktop files are built from .desktop.in files, so just remove
8525 all of them in make clean, and ignore all of them in .gitignore.
8526 This makes the rename less painful.
8528 Signed-off-by: Keith Packard <keithp@keithp.com>
8530 commit d1065424d144b8dab949db7e57140ffdf244bd48
8531 Author: Bdale Garbee <bdale@gag.com>
8532 Date: Tue Jun 24 21:22:26 2014 -0600
8534 need the api key in Bdale's root too
8536 commit bd440afc2a6e37b74fffcf1b977e149485095316
8537 Merge: 5d4f912 a0ccab8
8538 Author: Bdale Garbee <bdale@gag.com>
8539 Date: Tue Jun 24 21:17:53 2014 -0600
8541 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
8543 commit a0ccab8e4235934538a03f8be3b37aa1bbd6b144
8544 Author: Keith Packard <keithp@keithp.com>
8545 Date: Tue Jun 24 20:15:38 2014 -0700
8547 altosuilib: Mark 'Configure AltosUI' window with maps key status
8549 This lets us check a build to make sure it has a maps key
8551 Signed-off-by: Keith Packard <keithp@keithp.com>
8553 commit 5d4f912bcc6784f975c82f7b0ed8dc360e60aae8
8554 Author: Bdale Garbee <bdale@gag.com>
8555 Date: Tue Jun 24 21:12:59 2014 -0600
8557 make sure to use Google Maps API key for official builds
8559 commit 048ce00ea0d1d2744552942559aa1da2431ab954
8560 Author: Keith Packard <keithp@keithp.com>
8561 Date: Tue Jun 24 18:26:04 2014 -0700
8563 icon: Generate altusmetrum.xpm and install it
8565 This is for the debian menu, still a required part of a debian package.
8567 Signed-off-by: Keith Packard <keithp@keithp.com>
8569 commit dbff6dd42f8b6fb90c8d3f07bde48a6be0bfddf0
8570 Author: Keith Packard <keithp@keithp.com>
8571 Date: Tue Jun 24 18:25:31 2014 -0700
8573 altosuilib: Outline map lines and distance value with white
8575 This makes the value and line visible on dark backgrounds
8577 Signed-off-by: Keith Packard <keithp@keithp.com>
8579 commit ade2cc9abb8ca403a9ae5d1f9c145ab72ce94919
8580 Author: Keith Packard <keithp@keithp.com>
8581 Date: Tue Jun 24 18:24:02 2014 -0700
8583 altosuilib: Make map cache size configurable
8585 Systems with sufficient memory can get smoother map scrolling by
8586 making the cache larger. Would be nice to do this automatically?
8588 Signed-off-by: Keith Packard <keithp@keithp.com>
8590 commit 97269bb90c1602a1f8c54fc7b6c34383a0370621
8591 Author: Keith Packard <keithp@keithp.com>
8592 Date: Tue Jun 24 15:58:35 2014 -0700
8594 Bump version to 1.4.1.1
8596 commit 309d91d25099bebda21e165165efa9ce86cb0a47
8597 Author: Keith Packard <keithp@keithp.com>
8598 Date: Tue Jun 24 15:57:13 2014 -0700
8600 altos/ao_flight_test: Get the Tmega version compiling again
8602 A few changes broke this recently.
8604 Signed-off-by: Keith Packard <keithp@keithp.com>
8606 commit 443bbb09468df7c1a10f2c76996c92380d8b8c23
8607 Author: Keith Packard <keithp@keithp.com>
8608 Date: Tue Jun 24 15:56:11 2014 -0700
8610 altos: Add optional debugging to print out pyro firing status
8612 This dumps pyro check failures for ao_flight_test so you can see why
8613 pyro charges aren't firing.
8615 Signed-off-by: Keith Packard <keithp@keithp.com>
8617 commit 0a19073649570016db28d5e2a4a225273732adb5
8618 Author: Keith Packard <keithp@keithp.com>
8619 Date: Sun Jun 22 21:13:54 2014 -0700
8621 ao-bringup: Use the C tools to test EasyMini
8623 I think my USB driver in the kernel is broken; the nickle versions of
8624 these tools did very strange things and never worked.
8626 Signed-off-by: Keith Packard <keithp@keithp.com>
8628 commit fc3364de2b6cdfff53f5c38b3ae52ae5601ff3b7
8629 Author: Keith Packard <keithp@keithp.com>
8630 Date: Sun Jun 22 21:12:37 2014 -0700
8632 ao-tools: Add ao-test-baro, ao-test-igniter and ao-test-flash
8634 C versions of the test programs used to validate hardware prior to ship
8636 Signed-off-by: Keith Packard <keithp@keithp.com>
8638 commit 6cc2d671c0e335fbedb0e97699f8f273502c6807
8639 Author: Keith Packard <keithp@keithp.com>
8640 Date: Sun Jun 22 21:06:24 2014 -0700
8642 altosui/telegps: Expose configurable APRS SSID
8644 Signed-off-by: Keith Packard <keithp@keithp.com>
8646 commit 3f3382126bf1122b1a78abe8458af5ec112a1f95
8647 Author: Keith Packard <keithp@keithp.com>
8648 Date: Sun Jun 22 21:05:05 2014 -0700
8650 altos: Make APRS SSID configurable
8652 This uses the low-digit from the serial number by default, but lets
8653 the user change it if desired.
8655 Signed-off-by: Keith Packard <keithp@keithp.com>
8657 commit ca1c62ca3ea016a1a5baa4520e484c102280c3e3
8658 Author: Keith Packard <keithp@keithp.com>
8659 Date: Sat Jun 21 18:27:42 2014 -0700
8661 altosui: Add Ignitor tab to Monitor Idle mode
8663 Oops; missed adding this when I included it in the Monitor Flight window.
8665 Signed-off-by: Keith Packard <keithp@keithp.com>
8667 commit 602d6a2424a5c16e22febf6b4e6b3816022261c7
8668 Author: Keith Packard <keithp@keithp.com>
8669 Date: Fri Jun 20 00:41:17 2014 -0700
8671 altos/aprs: Encode last serial number in SSID. Transmit serial in comment
8673 This makes it a lot easier to tell which device is sending
8674 information, and to receive data from multiple devices on the same
8677 Signed-off-by: Keith Packard <keithp@keithp.com>
8679 commit 3016ee5f21ec66bf9230b90ab1420b8fad628f8d
8680 Author: Keith Packard <keithp@keithp.com>
8681 Date: Fri Jun 20 00:40:10 2014 -0700
8683 altosuilib: Wrap radio frequency menu in JMenuBar when used in config
8685 The device config dialogs place the radio frequency menu inside a
8686 dialog box; it needs to be inside a MenuBar to work properly, so
8687 create one to hold it.
8689 Signed-off-by: Keith Packard <keithp@keithp.com>
8691 commit 1b0f56ddb2b85b68232c22a7a8b8744cb9ad76f9
8692 Author: Keith Packard <keithp@keithp.com>
8693 Date: Thu Jun 19 14:33:27 2014 -0700
8695 Rename icon files to fit XDG specifications. Add file icons. Add mime types
8697 Our SVG icons now follow XDG standards by including a vendor
8698 prefix. The new file type icons include application-vnd.altusmetrum as
8699 a prefix so that they match the mime types declared.
8701 Signed-off-by: Keith Packard <keithp@keithp.com>
8703 commit 37856672c57f2fd91184c2391a201bbbdc48545e
8704 Author: Keith Packard <keithp@keithp.com>
8705 Date: Thu Jun 19 10:25:07 2014 -0700
8707 linux: .desktop files must begin with organization name
8709 The spec requires that .desktop files start with the organization
8710 name, so I've renamed all of them to altusmetrum-<application>.desktop
8712 Signed-off-by: Keith Packard <keithp@keithp.com>
8714 commit 1d773cb8921848c99f12b8cd9840cb0267b66e1f
8715 Author: Keith Packard <keithp@keithp.com>
8716 Date: Wed Jun 18 20:35:12 2014 -0700
8718 windows: Missed adding 'refresh-sh.nsh'
8720 This script forces windows explorer to reload icons.
8722 Signed-off-by: Keith Packard <keithp@keithp.com>
8724 commit 7767a045d446ea2bc5fe1ec98d89274155f956c4
8725 Author: Keith Packard <keithp@keithp.com>
8726 Date: Wed Jun 18 16:18:05 2014 -0700
8728 macosx: Respond to apple messages in all apps
8730 This connects the callbacks in AltosUIFrame to actually do something
8733 Signed-off-by: Keith Packard <keithp@keithp.com>
8735 commit d5bdb1c5974788b9569897435808fd01b04b0c4d
8736 Author: Keith Packard <keithp@keithp.com>
8737 Date: Wed Jun 18 16:14:44 2014 -0700
8739 altosuilib: Hook up apple messages to callbacks
8741 This supports open, quit and preferences. I'm leaving 'about' to the
8742 existing stuff until I decide it's worth the effort to create a fancy
8745 Signed-off-by: Keith Packard <keithp@keithp.com>
8747 commit e3eab18682e77c5394918448409d383a28ba23ad
8748 Author: Keith Packard <keithp@keithp.com>
8749 Date: Wed Jun 18 14:16:36 2014 -0700
8751 altosui: Ship TeleMetrum v2.0 firmware with AltosUI
8753 Signed-off-by: Keith Packard <keithp@keithp.com>
8755 commit fac94c593285eacda57de257fa2be0548341b567
8756 Author: Keith Packard <keithp@keithp.com>
8757 Date: Wed Jun 18 14:15:27 2014 -0700
8759 macosx: Define icons for our file types on OS X
8761 Adds definitions to the Info.plist files shipped to specify which
8762 icons to show for .telem, .eeprom and .mpd files. Note that the
8763 applications don't respond to open apple events, so double clicking on
8764 a file only starts the application.
8766 Signed-off-by: Keith Packard <keithp@keithp.com>
8768 commit 5871225a0c442cf5afa41a444ff8bfb8f4002721
8769 Author: Keith Packard <keithp@keithp.com>
8770 Date: Wed Jun 18 02:16:51 2014 -0700
8772 windows installer: Create file associations for Windows.
8774 This makes icons appear for the files in the file manager, and lets
8775 you double-click on the files to open the appropriate application.
8777 Signed-off-by: Keith Packard <keithp@keithp.com>
8779 commit c93c4efefee0dbf6d193466efd6761d9a1849ae9
8780 Author: Keith Packard <keithp@keithp.com>
8781 Date: Wed Jun 18 02:15:04 2014 -0700
8783 icon: Construct .exe files to hold windows icons for file associations
8785 It appears that creating an executable with an icon resource is the
8786 only way to display icons for files. Fortunately, that's not all that
8789 Signed-off-by: Keith Packard <keithp@keithp.com>
8791 commit 3f4e765c05ddbae83ca0c0176572cd698f285d08
8792 Author: Keith Packard <keithp@keithp.com>
8793 Date: Tue Jun 17 20:46:33 2014 -0700
8795 Fix java version detection and downloading
8797 Move java stuff to a common include file, java.nsh
8799 Let any version no older than 1.6 serve by using ${VersionCompare}
8801 Use version 6 downloads as those don't require a click-through agreement.
8803 Signed-off-by: Keith Packard <keithp@keithp.com>
8805 commit 495e84540943cccb6d1cb965a772021f7dc5f639
8806 Author: Keith Packard <keithp@keithp.com>
8807 Date: Tue Jun 17 00:08:03 2014 -0700
8809 Sign our .inf file with the comodo key. Update signing-driver
8811 I've tested this on Windows 7 and it appears to work. No idea if it
8812 works on Windows 8 yet.
8814 Signed-off-by: Keith Packard <keithp@keithp.com>
8816 commit b397e4ff45f054acb1347ffa5468950febc431f7
8817 Author: Keith Packard <keithp@keithp.com>
8818 Date: Mon Jun 16 23:03:49 2014 -0700
8820 altos/micropeak: Add load script template
8822 Signed-off-by: Keith Packard <keithp@keithp.com>
8824 commit c8078d352a7f54a4a97d25af080155d3f875536a
8825 Author: Keith Packard <keithp@keithp.com>
8826 Date: Mon Jun 16 22:49:34 2014 -0700
8828 java: Bump java library versions for next release
8830 Prepare for future release by bumping java versions now
8832 Signed-off-by: Keith Packard <keithp@keithp.com>
8834 commit 75766b0e7ee30fb3bfbf90ecb68f7758bac6eeba
8835 Author: Keith Packard <keithp@keithp.com>
8836 Date: Mon Jun 16 22:48:25 2014 -0700
8838 altosui: Fix ground station configure frequency list
8840 Fix the API to match the switch to a menu, wrap in a menu bar to make
8843 Signed-off-by: Keith Packard <keithp@keithp.com>
8845 commit ed38b1b596062b2232fa78a3181f6eaf5818b651
8846 Author: Keith Packard <keithp@keithp.com>
8847 Date: Mon Jun 16 21:58:13 2014 -0700
8849 altosuilib: Move menu bars into the Mac OS X top bar
8851 Setting these properties causes the top menu bar to get placed into
8852 the Mac OS X window system menu bar
8854 Signed-off-by: Keith Packard <keithp@keithp.com>
8856 commit e612693e33ef3b0e22db0656792992fa6e961ff2
8857 Author: Keith Packard <keithp@keithp.com>
8858 Date: Mon Jun 16 21:57:35 2014 -0700
8860 altosui/telegps: Use menus for frequency list and telemetry formats
8862 This will let us move them into the Mac OS X menu bar, as well as
8863 making them look a bit nicer.
8865 Signed-off-by: Keith Packard <keithp@keithp.com>
8867 commit 6579e4cae8fea65780f1c4677f29c1fc17ca41e2
8868 Author: Keith Packard <keithp@keithp.com>
8869 Date: Mon Jun 16 15:59:09 2014 -0700
8871 altos/micropeak: Create a script to load firmware.
8873 The micropeak-load script flashes micropeak with firmware from
8874 whatever directory it is sitting in. A 'publish' target in the source
8875 directory copies the script and hex to ~/altusmetrumllc/Binaries
8877 Signed-off-by: Keith Packard <keithp@keithp.com>
8879 commit 31beeb0882d27cbc05e28118611feec4ae43d9da
8880 Author: Keith Packard <keithp@keithp.com>
8881 Date: Mon Jun 16 11:02:49 2014 -0700
8883 doc: Add instructions for flash recovery technique
8885 The flash recovery section explained which pins to connect, but lacked
8886 explicit instructions on how to make it work.
8888 commit f167d348b147e89d269ad35806e39f28cf104afb
8889 Author: Bdale Garbee <bdale@gag.com>
8890 Date: Sun Jun 15 18:41:25 2014 -0600
8892 notes updated for TeleGPS and 1.4 release learnings
8894 commit 9ab3a1de95b705783c31a7e16447f52c10b6b480
8895 Author: Bdale Garbee <bdale@gag.com>
8896 Date: Sun Jun 15 17:44:42 2014 -0600
8898 turn-on support for TeleGPS
8900 commit b40351d5cb9802133f443d4f5150958b03b9e8f0
8901 Author: Bdale Garbee <bdale@gag.com>
8902 Date: Sun Jun 15 17:43:50 2014 -0600
8906 commit 97a7cbaee806965ca7c696fb02f6e1d24b026b9b
8907 Author: Bdale Garbee <bdale@gag.com>
8908 Date: Sun Jun 15 17:43:06 2014 -0600
8910 add release to revision history
8912 commit 79c3dc334d79eacd63bbbbec046fc2c31266560c
8913 Author: Bdale Garbee <bdale@gag.com>
8914 Date: Sun Jun 15 17:40:27 2014 -0600
8918 commit a6c61fb993d3fd15183f8755d9058f05c606c9c0
8919 Merge: 0634119 4384899
8920 Author: Keith Packard <keithp@keithp.com>
8921 Date: Sun Jun 15 16:31:01 2014 -0700
8923 Merge remote-tracking branch 'origin/master'
8925 commit 0634119df45bf8d8a040b47bdfc6d9801b5e069a
8926 Author: Keith Packard <keithp@keithp.com>
8927 Date: Sun Jun 15 16:24:28 2014 -0700
8929 micropeak: Deal with 64-bit windows
8931 Install 64-bit version of java. Install our bits in the 64-bit app directory
8933 Signed-off-by: Keith Packard <keithp@keithp.com>
8935 commit b6eb1ac1b777b6c11e8f24c5ab5915b224101d40
8936 Author: Keith Packard <keithp@keithp.com>
8937 Date: Sun Jun 15 16:16:59 2014 -0700
8939 Add notes about windows driver signing in the 'signing-driver' file
8941 Signed-off-by: Keith Packard <keithp@keithp.com>
8943 commit 6277827520df4df5ecda58898e5f99035f90282c
8944 Author: Keith Packard <keithp@keithp.com>
8945 Date: Sun Jun 15 16:11:49 2014 -0700
8947 altosui: Ship telegps firmware
8949 Signed-off-by: Keith Packard <keithp@keithp.com>
8951 commit 3b5651d311d4268a130996e71afc11b508e59637
8952 Author: Keith Packard <keithp@keithp.com>
8953 Date: Sun Jun 15 16:10:15 2014 -0700
8955 windows: Sign altusmetrum.inf with altusmetrum.cat
8957 This .cat file will need to be updated when we get our 'real'
8960 Signed-off-by: Keith Packard <keithp@keithp.com>
8962 commit ef6998c2d052bf639f257b71baefacf3a652506f
8963 Author: Keith Packard <keithp@keithp.com>
8964 Date: Sun Jun 15 16:06:42 2014 -0700
8966 icon: Add drop-shadows to the SVG files; stop generating in the png versions
8968 Now everyone gets drop shadows.
8970 Signed-off-by: Keith Packard <keithp@keithp.com>
8972 commit 43848991defaeb7fae994101675b0056f9d9a2ed
8973 Author: Bdale Garbee <bdale@gag.com>
8974 Date: Sun Jun 15 17:29:49 2014 -0600
8976 update Releasing document to include TeleGPS firmware files in those copied
8978 commit 90e03dfc8534fc4fc25f6a5ee9ec109b98baa238
8979 Author: Bdale Garbee <bdale@gag.com>
8980 Date: Sun Jun 15 17:28:02 2014 -0600
8982 document mounting hole size for TeleGPS
8984 commit 44fc36b3f74386f0055eac4d9b9d201e6fff0847
8985 Author: Keith Packard <keithp@keithp.com>
8986 Date: Sun Jun 15 16:08:27 2014 -0700
8988 altosui: Deal with 64-bit windows
8990 Get a 64-bit java version installed
8992 Signed-off-by: Keith Packard <keithp@keithp.com>
8994 commit 1a563026409ccff5dea6f89e567accb09bc4b5f6
8995 Author: Keith Packard <keithp@keithp.com>
8996 Date: Sun Jun 15 14:09:09 2014 -0700
8998 telegps: Deal with 64-bit windows differently on install
9000 Download a 64-bit version of java as needed, install in 64-bit paths
9001 instead of 32-bit paths.
9003 Signed-off-by: Keith Packard <keithp@keithp.com>
9005 commit abf731b3d79b66d9da62496cebf157f2888a4c93
9006 Author: Keith Packard <keithp@keithp.com>
9007 Date: Sun Jun 15 12:39:49 2014 -0700
9009 windows: Rename telemetrum.inf to altusmetrum.inf
9011 Use the corporate name for this file
9013 Signed-off-by: Keith Packard <keithp@keithp.com>
9015 commit 8073007292875169a6304824ae52039ce6564813
9016 Author: Keith Packard <keithp@keithp.com>
9017 Date: Sat Jun 14 22:29:01 2014 -0700
9019 telegps: Include telegps firmware in windows package
9021 This was disabled when the firmware wasn't ready yet
9023 Signed-off-by: Keith Packard <keithp@keithp.com>
9025 commit 6cad0b783f654864f0d6d8726c74605f108db3e0
9026 Author: Keith Packard <keithp@keithp.com>
9027 Date: Sat Jun 14 22:23:10 2014 -0700
9029 altosuilib: Remove some debugging printfs
9031 Signed-off-by: Keith Packard <keithp@keithp.com>
9033 commit 823ef386f9dc5c5df197936f4254921f2e0282b0
9034 Author: Keith Packard <keithp@keithp.com>
9035 Date: Sat Jun 14 20:08:40 2014 -0700
9037 altoslib: AltosFlightStatsTable: another editable text field that shouldn't be
9039 Signed-off-by: Keith Packard <keithp@keithp.com>
9041 commit 5392ee3c5328f8384ed30a2d147e4be96075e064
9042 Author: Keith Packard <keithp@keithp.com>
9043 Date: Sat Jun 14 18:51:25 2014 -0700
9045 altosuilib: Serialize access to async tile notify function in preload
9047 This ensures that we see each tile getting downloaded and don't
9048 mis-count, which would result in wedging the process
9050 Signed-off-by: Keith Packard <keithp@keithp.com>
9052 commit 23708b4760250f55e8e3b1a0141df9a9ee17a936
9053 Author: Keith Packard <keithp@keithp.com>
9054 Date: Sat Jun 14 18:34:09 2014 -0700
9056 icon: Make the icon shadows a bit less harsh
9058 Signed-off-by: Keith Packard <keithp@keithp.com>
9060 commit 4e3318645d08dda483aced97450b344629902c4d
9061 Author: Keith Packard <keithp@keithp.com>
9062 Date: Sat Jun 14 18:11:28 2014 -0700
9064 debian: Build requires /usr/bin/convert now
9066 This is provided by either graphicsmagick or imagemagick
9068 Signed-off-by: Keith Packard <keithp@keithp.com>
9070 commit 382e27de3472489f8f26c8c0868732d67754ecf5
9071 Author: Keith Packard <keithp@keithp.com>
9072 Date: Sat Jun 14 18:09:31 2014 -0700
9074 telegps/micropeak: Ship built Mac OSX icons
9076 Signed-off-by: Keith Packard <keithp@keithp.com>
9078 commit 33da986161c38936cff82fe43046f0bcd5e24d8e
9079 Author: Keith Packard <keithp@keithp.com>
9080 Date: Sat Jun 14 18:07:39 2014 -0700
9082 icon: Build resolutions needed for Java bits too
9084 Signed-off-by: Keith Packard <keithp@keithp.com>
9086 commit 66c4a091bb6a294f9d406e75f3634492c886d139
9087 Author: Keith Packard <keithp@keithp.com>
9088 Date: Sat Jun 14 18:06:36 2014 -0700
9090 altosui: Build MacOSX icon from svg
9092 Signed-off-by: Keith Packard <keithp@keithp.com>
9094 commit b825ea71ebcc4a8da3e339ab3e21b0ad47f2e48f
9095 Author: Keith Packard <keithp@keithp.com>
9096 Date: Sat Jun 14 18:02:51 2014 -0700
9098 icon: Build windows ico files, clean built files
9100 Signed-off-by: Keith Packard <keithp@keithp.com>
9102 commit 4ec960b705b87b15d015abb2a9a3e23eee414f1d
9103 Author: Keith Packard <keithp@keithp.com>
9104 Date: Sat Jun 14 17:51:46 2014 -0700
9106 icon: Create all icons from .svg files
9108 Remove images from repository, leaving only the svg files and build
9111 Signed-off-by: Keith Packard <keithp@keithp.com>
9113 commit 951fda701ed31f4d8390c130215597e8f63e837e
9114 Author: Keith Packard <keithp@keithp.com>
9115 Date: Sat Jun 14 16:26:22 2014 -0700
9117 altosuilib: Make graph enable buttons be CheckBoxes instead of RadioButtons
9121 Signed-off-by: Keith Packard <keithp@keithp.com>
9123 commit 8e00f59be582de86cef28b33ce5523f39d3dc933
9124 Author: Keith Packard <keithp@keithp.com>
9125 Date: Sat Jun 14 16:05:51 2014 -0700
9127 telegps: Fix Mac icon file name
9129 Signed-off-by: Keith Packard <keithp@keithp.com>
9131 commit 92943bf4536d4167edd097e61de5e6b4f29130f8
9132 Author: Keith Packard <keithp@keithp.com>
9133 Date: Sat Jun 14 15:44:20 2014 -0700
9135 micropeak: Make statistics entries un-editable
9137 Otherwise you can actually type in the various fields.x
9139 Signed-off-by: Keith Packard <keithp@keithp.com>
9141 commit 1fc3032d688cbb7c09c1dffde30cc815f3594e29
9142 Author: Keith Packard <keithp@keithp.com>
9143 Date: Sat Jun 14 15:20:07 2014 -0700
9145 alotsuilib: Remove old "mega" and "mini" file extensions from data chooser
9147 We never shipped AltosUI which stored mega/mini files in different extensions
9149 Signed-off-by: Keith Packard <keithp@keithp.com>
9151 commit c11b2f5caa3fbe2bc977e716ec1c3ccee9e75884
9152 Author: Keith Packard <keithp@keithp.com>
9153 Date: Sat Jun 14 14:41:13 2014 -0700
9155 altosui/telegps: Switch to AltosUIIndicator and AltosUIFlightTab
9157 Removes replicated code across all flight tabs
9159 Signed-off-by: Keith Packard <keithp@keithp.com>
9161 commit f5887a3e7cf993e23dbb1e0f6b9ebece78c34413
9162 Author: Keith Packard <keithp@keithp.com>
9163 Date: Sat Jun 14 14:40:24 2014 -0700
9165 altosuilib: Add AltosUIFlightTab class
9167 This covers most of the common functions for all flight status display tabs.
9169 Signed-off-by: Keith Packard <keithp@keithp.com>
9171 commit 8250777e6e869bcee9781691caa1f2a7cfb33b43
9172 Author: Keith Packard <keithp@keithp.com>
9173 Date: Sat Jun 14 14:39:26 2014 -0700
9175 altosuilib: Add more options to AltosUIIndicator to suit AltosUI
9177 This makes AltosUIIndicator capable of displaying most stuff in AltosUI
9179 Signed-off-by: Keith Packard <keithp@keithp.com>
9181 commit 19273a4a341342ca6b5d65cfc490d92cbf23356f
9182 Author: Keith Packard <keithp@keithp.com>
9183 Date: Sat Jun 14 14:38:00 2014 -0700
9185 altosuilib: Make sure only one thread is closing serial device
9187 Multiple closers can cause a crash by freeing the libaltos device twice
9189 Signed-off-by: Keith Packard <keithp@keithp.com>
9191 commit 2903f0911e79e381c6125022bb84096321c258eb
9192 Author: Keith Packard <keithp@keithp.com>
9193 Date: Sat Jun 14 14:37:35 2014 -0700
9195 altosuilib: provide getName() for AltosInfoTable
9197 Signed-off-by: Keith Packard <keithp@keithp.com>
9199 commit 242e968a6982f2ceaa79780cbeec8c4e21321b44
9200 Author: Keith Packard <keithp@keithp.com>
9201 Date: Sat Jun 14 14:36:49 2014 -0700
9203 altosuilib: In graph, show zero sats in view as 0 instead of MISSING
9205 Signed-off-by: Keith Packard <keithp@keithp.com>
9207 commit c7553c54765dcc9ac532fe52aae9594b2ad5e560
9208 Author: Keith Packard <keithp@keithp.com>
9209 Date: Sat Jun 14 14:36:11 2014 -0700
9211 altosuilib: Require all flight display classes to provide a name
9213 Signed-off-by: Keith Packard <keithp@keithp.com>
9215 commit 14f0faae48849ff6f1e326a294b54c504c730bb9
9216 Author: Keith Packard <keithp@keithp.com>
9217 Date: Sat Jun 14 14:34:59 2014 -0700
9219 altoslib: When GPS disappears, set range and elevation to MISSING
9221 Use MISSING instead of bogus values so that displayers can tell what
9224 Signed-off-by: Keith Packard <keithp@keithp.com>
9226 commit 451950bba9ee3b25b5d0c6e5f0b55f08a5b29f73
9227 Author: Keith Packard <keithp@keithp.com>
9228 Date: Sat Jun 14 14:33:58 2014 -0700
9230 altoslib: Add units converters for latitude and longitude
9232 Makes display of these values consistent across all instances
9234 Signed-off-by: Keith Packard <keithp@keithp.com>
9236 commit ae7084f5199318dc6582e212492a50cfda1cebb8
9237 Author: Keith Packard <keithp@keithp.com>
9238 Date: Fri Jun 13 22:36:00 2014 -0700
9240 doc: TeleGPS docs are complete
9242 All TeleGPS features should now be documented to some degree
9244 Signed-off-by: Keith Packard <keithp@keithp.com>
9246 commit bfbabfa60f3cedd994f693867bce56aad05be02a
9247 Author: Keith Packard <keithp@keithp.com>
9248 Date: Fri Jun 13 22:04:57 2014 -0700
9250 telegps: Allow TeleGPS preferences to have a custom title and label
9252 Don't just inherit the AltosUI ones
9254 Signed-off-by: Keith Packard <keithp@keithp.com>
9256 commit 536db8d03aedb45698c42418c50a46d609fc98ad
9257 Author: Keith Packard <keithp@keithp.com>
9258 Date: Fri Jun 13 22:04:35 2014 -0700
9260 doc: Add a bunch more stuff to the telegps docs
9262 Signed-off-by: Keith Packard <keithp@keithp.com>
9264 commit 9a6a3c34293eac6442f766e13ce148f595e891eb
9265 Author: Keith Packard <keithp@keithp.com>
9266 Date: Fri Jun 13 21:26:33 2014 -0700
9268 altosuilib: Make map-cache per-window instead of global
9270 This consumes more memory, but avoids cache conflicts between windows
9272 Signed-off-by: Keith Packard <keithp@keithp.com>
9274 commit 92895c87bc3d97bf4990f1feda0bd8b07da4c405
9275 Author: Keith Packard <keithp@keithp.com>
9276 Date: Fri Jun 13 21:25:41 2014 -0700
9278 telegps: Shuffle menu entries around
9280 I think this makes them a bit more logical
9282 Signed-off-by: Keith Packard <keithp@keithp.com>
9284 commit fb2d0c1ef98d9df3f64fb756d78392ce63a73435
9285 Author: Keith Packard <keithp@keithp.com>
9286 Date: Fri Jun 13 15:54:08 2014 -0700
9288 altosdroid: Improve voice for TeleGPS
9290 This avoids making lots of useless voice announcements for TeleGPS
9292 Signed-off-by: Keith Packard <keithp@keithp.com>
9294 commit 191ea4a7bbcb22d70c648a9ba746f1061e6f74cb
9295 Author: Keith Packard <keithp@keithp.com>
9296 Date: Fri Jun 13 15:53:30 2014 -0700
9298 altosdroid: Don't crash when the map is touched
9300 The map 'canScroll' method was crashing when dereferencing a null
9301 value somewhere. Just check all of them and bail instead of crashing.
9303 Signed-off-by: Keith Packard <keithp@keithp.com>
9305 commit 3f7e885055f8a97f334e0cd3163b760b174114b6
9306 Author: Keith Packard <keithp@keithp.com>
9307 Date: Fri Jun 13 15:23:30 2014 -0700
9309 telegps: Add status tab
9311 This includes pad-relative information, battery voltage and version information
9313 Signed-off-by: Keith Packard <keithp@keithp.com>
9315 commit 876acbdc22ff93c22836f789e0b6394eb19e0da3
9316 Author: Keith Packard <keithp@keithp.com>
9317 Date: Fri Jun 13 15:22:25 2014 -0700
9319 altoslib: Correctly save firmware version in AltosState
9321 It wasn't getting cloned
9323 Signed-off-by: Keith Packard <keithp@keithp.com>
9325 commit 3bfba8f9dbc1627a317804713f83b9d06566d008
9326 Author: Keith Packard <keithp@keithp.com>
9327 Date: Fri Jun 13 15:21:28 2014 -0700
9329 altoslib: Add conversion class for voltages
9331 Provide a common presentation for voltage values
9333 Signed-off-by: Keith Packard <keithp@keithp.com>
9335 commit 7ed63b6c3d5878a59f52f4114b5b01942735805f
9336 Author: Keith Packard <keithp@keithp.com>
9337 Date: Fri Jun 13 15:20:20 2014 -0700
9339 altosuilib: Build some common classes for displaying values in flight window
9341 Right now, all of the flight displays have piles of custom code for
9342 displaying values. These new widgets should be able to replace most of
9345 Signed-off-by: Keith Packard <keithp@keithp.com>
9347 commit a21dbb05fad2625d17bc2302faa96dc295e6ed7c
9348 Author: Keith Packard <keithp@keithp.com>
9349 Date: Fri Jun 13 00:28:38 2014 -0700
9351 telegps: Show flight number in monitor window
9353 This lets the user find the flight by number
9355 Signed-off-by: Keith Packard <keithp@keithp.com>
9357 commit 8cb41ce9a64029b611b3595c86a4a8e74b952ff4
9358 Author: Keith Packard <keithp@keithp.com>
9359 Date: Fri Jun 13 00:28:09 2014 -0700
9361 telegps: Disconnect telemetry device when closing monitor window
9363 Signed-off-by: Keith Packard <keithp@keithp.com>
9365 commit fd9ae83492648c5d39f60bdcff15481efb365701
9366 Author: Keith Packard <keithp@keithp.com>
9367 Date: Fri Jun 13 00:27:19 2014 -0700
9369 altoslib: Remove telem monitoring when closing log file
9371 If we don't remove the telemetry monitor, the telemetry device will
9372 still be sending telemetry, which isn't good.
9374 Signed-off-by: Keith Packard <keithp@keithp.com>
9376 commit 07baa7596b36cf808cd1ee26ff158b1cf8585294
9377 Author: Keith Packard <keithp@keithp.com>
9378 Date: Fri Jun 13 00:01:46 2014 -0700
9380 altoslib: Call state.set_serial first for telemetry parsing
9382 If we ever get around to supporting multiple simultaneous remote
9383 devices, we'll need to notice that the serial changed right away
9385 Signed-off-by: Keith Packard <keithp@keithp.com>
9387 commit f49540acd48292bd9f68ded647561d0e800c619d
9388 Author: Keith Packard <keithp@keithp.com>
9389 Date: Thu Jun 12 23:59:37 2014 -0700
9391 altos/telegps: Create new flight if current flight is erased
9393 telegps is unique in that USB may be connected while a flight is
9394 active and sensible things should happen. If a flight is being
9395 recorded and gets erased, then a new flight should be started.
9397 This is done by hooking in the flight erase code and calling out to
9398 the tracker code to figure out whether to switch to a new flight or not.
9400 Signed-off-by: Keith Packard <keithp@keithp.com>
9402 commit 8117ba3553789a2bae9beb92fbe9e14e3cc79389
9403 Author: Keith Packard <keithp@keithp.com>
9404 Date: Thu Jun 12 23:56:07 2014 -0700
9406 altos: Define ao_log_mutex in ao_log.c rather than every log product
9408 Signed-off-by: Keith Packard <keithp@keithp.com>
9410 commit dcaaf51245b44a440ee8590512f71195c30c16ae
9411 Author: Keith Packard <keithp@keithp.com>
9412 Date: Thu Jun 12 21:54:13 2014 -0700
9414 altos/telegps: Keep ring of recent GPS positions to detect motion quickly
9416 Instead of comparing only against the last logged value, keep a ring
9417 and start logging as soon as we move away from the furthest one in the ring.
9419 Signed-off-by: Keith Packard <keithp@keithp.com>
9421 commit 740d964ab82da8695c04650926afee4a0905011c
9422 Author: Keith Packard <keithp@keithp.com>
9423 Date: Thu Jun 12 21:53:07 2014 -0700
9425 altos/telegps: Set default log to 496kB for 4 logs
9427 This leaves space for four flight logs.
9429 Signed-off-by: Keith Packard <keithp@keithp.com>
9431 commit 77b5c0cc7f085aa3c0fada5d4a943eeaf16cf6e0
9432 Author: Keith Packard <keithp@keithp.com>
9433 Date: Thu Jun 12 21:52:13 2014 -0700
9435 altos: Show current flight number for TeleGPS
9437 Signed-off-by: Keith Packard <keithp@keithp.com>
9439 commit bfdaa95cb72c833896076d4e1a4bfe61d9549fed
9440 Author: Keith Packard <keithp@keithp.com>
9441 Date: Thu Jun 12 15:59:20 2014 -0700
9443 debian: Fix build depends icotool -> icoutils
9445 Signed-off-by: Keith Packard <keithp@keithp.com>
9447 commit 7e911c2afff78db2e385c6346c90bfcd72a8f3fb
9448 Author: Keith Packard <keithp@keithp.com>
9449 Date: Thu Jun 12 14:34:02 2014 -0700
9451 altos/telegps: Don't log data when plugged in to USB
9453 We don't want to accidentally log stuff when you're just trying to
9456 Signed-off-by: Keith Packard <keithp@keithp.com>
9458 commit 7d77d83685cbfce5323767bbfae3bd18be175ffc
9459 Author: Keith Packard <keithp@keithp.com>
9460 Date: Thu Jun 12 14:32:15 2014 -0700
9462 telegps: Don't re-add frequency menu when already present.
9464 If the receiver disappears, we'll stop tracking, but won't pull the
9465 frequency menu down. Doing that would take a bit of work, and it
9466 doesn't seem worth the effort. As a kludge-around, avoid re-creating
9467 the frequency menu if it's already displayed when we connect to
9470 Signed-off-by: Keith Packard <keithp@keithp.com>
9472 commit 8044eb8e23366e91c741060939baff5137f841c7
9473 Author: Keith Packard <keithp@keithp.com>
9474 Date: Thu Jun 12 14:12:08 2014 -0700
9476 altosui/telegps: Reduce CPU time needed for flight displays
9478 Don't update displays which aren't shown; track hierarchy changes to
9479 trigger display from most recent state data.
9481 Don't update values which haven't changed; remember previous values
9482 and compare with new before updating widget contents.
9484 Signed-off-by: Keith Packard <keithp@keithp.com>
9486 commit e00ffe6ab6197ab48ba8ce3cf71a197f7215649f
9487 Author: Keith Packard <keithp@keithp.com>
9488 Date: Wed Jun 11 23:28:55 2014 -0700
9490 doc: Add TeleGPS screenshots
9492 Signed-off-by: Keith Packard <keithp@keithp.com>
9494 commit c7774114f7bc62e2100c7575b1dcf3536ed56343
9495 Author: Keith Packard <keithp@keithp.com>
9496 Date: Wed Jun 11 23:28:36 2014 -0700
9498 doc: Update altusmetrum docs and screen shots for 1.4
9500 Signed-off-by: Keith Packard <keithp@keithp.com>
9502 commit 1ed591c7bdf19fe54bbde1827d0717f0ae51e003
9503 Author: Keith Packard <keithp@keithp.com>
9504 Date: Wed Jun 11 23:27:16 2014 -0700
9506 telegps: Remove 'Flight' from titles
9508 Signed-off-by: Keith Packard <keithp@keithp.com>
9510 commit 0495f1b5282d8f7449cbbc1dbf99d63818d7c03c
9511 Author: Keith Packard <keithp@keithp.com>
9512 Date: Wed Jun 11 23:26:36 2014 -0700
9514 altos/telegps: Build .ihx versions for TeleGPS
9516 Needed to load with java
9518 Signed-off-by: Keith Packard <keithp@keithp.com>
9520 commit 6f306b267f63d0f59fb77b1ce41c678042dd6802
9521 Author: Keith Packard <keithp@keithp.com>
9522 Date: Wed Jun 11 23:04:46 2014 -0700
9524 altosuilib: Repaint map when starting line draw
9526 Starting line draw will remove any existing line, so repaint to get
9529 Signed-off-by: Keith Packard <keithp@keithp.com>
9531 commit efb6a3d5ed12f8061a48a66efcfe066e68eaf792
9532 Author: Keith Packard <keithp@keithp.com>
9533 Date: Wed Jun 11 23:04:11 2014 -0700
9535 altoslib: Report GPS height when baro height is not available
9537 Signed-off-by: Keith Packard <keithp@keithp.com>
9539 commit 57272609b0d2890029fdeceeca14da93cebdb471
9540 Author: Keith Packard <keithp@keithp.com>
9541 Date: Wed Jun 11 21:37:23 2014 -0700
9543 altosui: Don't list tracker parameters when configuring altimeter
9545 Signed-off-by: Keith Packard <keithp@keithp.com>
9547 commit bfc0c65c9f9ec9547d71016fc897ba35bdb414f8
9548 Author: Keith Packard <keithp@keithp.com>
9549 Date: Wed Jun 11 20:36:49 2014 -0700
9551 altosuilib: Handle font and units changes in maps and stats table
9553 Add AltosFontListener and AltosUnitsListener bits as needed
9555 Signed-off-by: Keith Packard <keithp@keithp.com>
9557 commit 2182c49298e0862a60dea104450d5f74dbeaeeb2
9558 Author: Keith Packard <keithp@keithp.com>
9559 Date: Wed Jun 11 19:57:24 2014 -0700
9561 doc: Update 1.4 release notes to include a few more changes
9564 flight erase on TeleMega/TeleMetrum v2
9566 Signed-off-by: Keith Packard <keithp@keithp.com>
9568 commit d744e588b7504f314e39b1407152d11c031673c9
9569 Author: Keith Packard <keithp@keithp.com>
9570 Date: Wed Jun 11 19:51:37 2014 -0700
9572 altosui: Add pyro firing time configuration
9574 Signed-off-by: Keith Packard <keithp@keithp.com>
9576 commit fcbfb3aea20e564045fc6a86f978cacabfc73226
9577 Author: Keith Packard <keithp@keithp.com>
9578 Date: Wed Jun 11 18:58:09 2014 -0700
9580 altosdroid: Altosdroid build doesn't work in parallel, so stop trying
9582 Signed-off-by: Keith Packard <keithp@keithp.com>
9584 commit c661d5de7d9c8e430211e0f97ab0bf3f09a1a543
9585 Author: Keith Packard <keithp@keithp.com>
9586 Date: Wed Jun 11 18:53:42 2014 -0700
9588 altos: Re-enable telemini v2.0 builds
9590 Signed-off-by: Keith Packard <keithp@keithp.com>
9592 commit 18b0f0966dfc4d1a716d4faea6f661bd3594bd94
9593 Author: Keith Packard <keithp@keithp.com>
9594 Date: Wed Jun 11 18:53:10 2014 -0700
9596 altos/telemini-v2.0: Disable beep frequency config on TeleMini v2.0
9598 Not enough flash otherwise.
9600 Signed-off-by: Keith Packard <keithp@keithp.com>
9602 commit ac5b15692874ea3f7b3814250ab49c68786aa982
9603 Author: Keith Packard <keithp@keithp.com>
9604 Date: Wed Jun 11 18:51:19 2014 -0700
9606 altosuilib: Remove old widget-based map UI
9608 Signed-off-by: Keith Packard <keithp@keithp.com>
9610 commit 7a70e6fe3a11382d7f6653d19afac9ceb563db3b
9611 Author: Keith Packard <keithp@keithp.com>
9612 Date: Wed Jun 11 18:50:07 2014 -0700
9614 altos: Disable TeleMini v2.0 build for now
9616 commit a8325483adb8d9ffda62d3f4900cf52bde70ff62
9617 Author: Keith Packard <keithp@keithp.com>
9618 Date: Wed Jun 11 18:48:11 2014 -0700
9620 altoslib: Use GPS seconds as an additional sort key for TeleGPS eeprom
9622 Long idle periods with TeleGPS can easily overflow 16 bits of tick
9623 count. Using the GPS seconds provides an additional sort which will
9624 span the tick wrap-around.
9626 Signed-off-by: Keith Packard <keithp@keithp.com>
9628 commit db2443fdbf65b65703217174303027c439124a83
9629 Author: Keith Packard <keithp@keithp.com>
9630 Date: Wed Jun 11 18:46:47 2014 -0700
9632 altosuilib: Rewrite map GUI bits
9634 Use a single large Canvas and draw images on top by hand.
9636 Signed-off-by: Keith Packard <keithp@keithp.com>
9638 commit ac33ca137551e32235cd2a0304da4b5e7af51a44
9639 Author: Keith Packard <keithp@keithp.com>
9640 Date: Tue Jun 10 11:36:03 2014 -0700
9642 telegps: Add statistics tab to graph UI
9644 Signed-off-by: Keith Packard <keithp@keithp.com>
9646 commit 73249dbf16382c91c2a220ff852a4f099fe0de3d
9647 Author: Keith Packard <keithp@keithp.com>
9648 Date: Tue Jun 10 11:35:30 2014 -0700
9650 altosuilib: Move AltosFlightStatsTable to altosuilib
9652 So that TeleGPS can share it
9654 Signed-off-by: Keith Packard <keithp@keithp.com>
9656 commit 9ef32b103c5c312aaa90b6546e504f2edeb1f99a
9657 Author: Keith Packard <keithp@keithp.com>
9658 Date: Tue Jun 10 11:34:21 2014 -0700
9660 altosuilib: Skip voice announcements for invalid values
9662 When height and speed values aren't available, don't say anything
9664 Signed-off-by: Keith Packard <keithp@keithp.com>
9666 commit 90686853e46b7f0df9bdaf671f859819eef926e0
9667 Author: Keith Packard <keithp@keithp.com>
9668 Date: Tue Jun 10 11:32:57 2014 -0700
9670 altosui: Show "Missing" instead of huge numbers in descent/landed tabs
9672 Signed-off-by: Keith Packard <keithp@keithp.com>
9674 commit 7bdd0deabaae38ddfecd1ea2ea8deaf9af40b2ac
9675 Author: Keith Packard <keithp@keithp.com>
9676 Date: Tue Jun 10 11:31:53 2014 -0700
9678 altoslib: Use GPS speed/height values when other sensors are missing
9680 This lets TeleGPS report height/speed values without needing to
9681 customize every AltosState user to pull out GPS values when the other
9682 sensors aren't present.
9684 Signed-off-by: Keith Packard <keithp@keithp.com>
9686 commit 6fc58142d2a108c91d257eb0175098bf082834f9
9687 Author: Keith Packard <keithp@keithp.com>
9688 Date: Tue Jun 10 11:30:36 2014 -0700
9690 altosuilib: Split battery graph enable out from other adc enables
9692 This lets TeleGPS just show the battery voltage values without also
9693 adding enable lines for the other flight computer ADC values like
9696 Signed-off-by: Keith Packard <keithp@keithp.com>
9698 commit 9d39bbd22e6cde1bbb39e7b5450f297d47365769
9699 Author: Keith Packard <keithp@keithp.com>
9700 Date: Tue Jun 10 10:19:43 2014 -0700
9702 altoslib: Check for time going backwards when replaying from file
9704 Signed-off-by: Keith Packard <keithp@keithp.com>
9706 commit ff13cf1359e1f4ae33b16a5867fd364993566b65
9707 Author: Keith Packard <keithp@keithp.com>
9708 Date: Tue Jun 10 10:18:44 2014 -0700
9710 altoslib: Add new 'stateless' flight state for TeleGPS
9712 TeleGPS has no flight state, so add a new 'stateless' state for code
9713 to handle this case differently than any of the existing states
9715 Signed-off-by: Keith Packard <keithp@keithp.com>
9717 commit 871fb4753a3b54cc2e22309e80e24dfe9cc54511
9718 Author: Keith Packard <keithp@keithp.com>
9719 Date: Tue Jun 10 10:15:47 2014 -0700
9721 altoslib: TeleGPS no longer logs satellite information
9723 This doubles the amount of space available to log position information
9725 Signed-off-by: Keith Packard <keithp@keithp.com>
9727 commit 5f2029bd4e31289fb03e6af39abdbc16f8b8fa78
9728 Author: Keith Packard <keithp@keithp.com>
9729 Date: Tue Jun 10 10:14:07 2014 -0700
9731 altoslib/altosui/telegps: Switch TeleGPS config to motion/interval
9733 TeleGPS had configurable boost-detect values; those have been replaced
9734 with a configurable stop-tracking motion limit and logging/telemetry
9737 Signed-off-by: Keith Packard <keithp@keithp.com>
9739 commit ae1174317fc476e39077f7dc257ec08709c6b301
9740 Author: Keith Packard <keithp@keithp.com>
9741 Date: Tue Jun 10 10:11:03 2014 -0700
9743 altoslib/altosui/telegps: Change log size configuration
9745 * Use new log-space value provided by firmware when available.
9747 * Divide that up into 1-8 flights and offer those sizes as options to
9748 the user instead of a fixed set of sizes.
9750 * Show how many flights each selection will store
9752 * This also checks values provided by the user
9754 Signed-off-by: Keith Packard <keithp@keithp.com>
9756 commit 44ca50a2c9404c92cc887a23dfa25b335ebe6198
9757 Author: Keith Packard <keithp@keithp.com>
9758 Date: Tue Jun 10 09:55:04 2014 -0700
9760 altos: Set TeleGPS default log size to half of avaiable memory
9762 LPC11U14 doesn't have on-chip config space, so we're consuming a block
9763 of external flash. As a result, only 1984kB are available for
9764 logging. Set the default log size to half of that to store two flights.
9766 Signed-off-by: Keith Packard <keithp@keithp.com>
9768 commit 9d7f4fb6af0fee843191766858e39a481aeda347
9769 Author: Keith Packard <keithp@keithp.com>
9770 Date: Tue Jun 10 09:52:15 2014 -0700
9772 altos: Simplify tracker logic, removing boost detect
9774 This removes the ao_flight_state value from the tracker code and makes
9775 it simply log position information when the device has moved within
9776 the last 10 log intervals. This also changes the configuration
9777 parameters to define what 'motionless' means, and what interval to
9778 configure the GPS receiver for, log data and send telemetry.
9780 Signed-off-by: Keith Packard <keithp@keithp.com>
9782 commit c5a7889a8da3da64deb0f118656784e0ee3fd511
9783 Author: Keith Packard <keithp@keithp.com>
9784 Date: Tue Jun 10 09:47:04 2014 -0700
9786 Revert adding state to GPS location packets
9788 TeleGPS no longer has ao_flight_state
9790 Signed-off-by: Keith Packard <keithp@keithp.com>
9792 commit f6d633d73a8f826cf2a3128e3e234bd11af49718
9793 Author: Keith Packard <keithp@keithp.com>
9794 Date: Tue Jun 10 09:44:57 2014 -0700
9796 Revert "ao-tools: Parse TeleGPS state value from gps location packet"
9798 This reverts commit 428d09294ba0395fedd71346ad00fd90a4cdde97.
9800 commit da9575fce5ff4dfe83522e290973a01c43e4661f
9801 Author: Keith Packard <keithp@keithp.com>
9802 Date: Tue Jun 10 09:42:43 2014 -0700
9804 altos: Make extra pyro channel firing time configurable
9806 This adds a 'I' parameter to set the extra pyro channel firing time
9807 (in ticks). This has no effect on the main/drogue channels.
9809 Signed-off-by: Keith Packard <keithp@keithp.com>
9811 commit 75df97b5f6ade3310618a477b685d39b7fd4666e
9812 Author: Keith Packard <keithp@keithp.com>
9813 Date: Tue Jun 10 09:37:43 2014 -0700
9815 altos: Report total available log space in version command
9817 This provides a more accurate means of determining available log space
9818 than guessing whether some portion of the flash chip holds
9821 Signed-off-by: Keith Packard <keithp@keithp.com>
9823 commit 998eae61ecf56dd6ead4ec6ad82c952ae84170df
9824 Author: Keith Packard <keithp@keithp.com>
9825 Date: Tue Jun 10 09:36:59 2014 -0700
9827 Revert "altos: Write current flight state to GPS data from GPS drivers"
9829 This reverts commit db6003d34595fbd103d5b131912b6a797254f1c5.
9831 commit d696b34b4823647e2e91093ba9d5a351d3a52f8a
9832 Author: Keith Packard <keithp@keithp.com>
9833 Date: Sun Jun 8 16:08:30 2014 -0700
9835 Revert "altoslib: Parse TeleGPS state value from GPS telemetry packet"
9837 This reverts commit d69547796caf74405f8304d23d4ae318315bbd7b.
9839 commit 5c117621444bc13aebbc7dc618b4a56f620931ac
9840 Author: Keith Packard <keithp@keithp.com>
9841 Date: Sat Jun 7 22:37:30 2014 -0700
9843 Bump to version 1.3.2.4
9845 commit b33de8ba1e48d8ad0cb78f1c5692bb81da916080
9846 Author: Keith Packard <keithp@keithp.com>
9847 Date: Sat Jun 7 22:25:17 2014 -0700
9849 altoslib: Recover battery voltage from TeleGPS configuration packet
9851 TeleGPS stuffs battery voltage in the apogee_delay slot of the
9852 configuration packet. Pull it out from there and stick it into the
9855 Signed-off-by: Keith Packard <keithp@keithp.com>
9857 commit 6950506beacb1bcd5b8e54c3935174cf800e9aed
9858 Author: Keith Packard <keithp@keithp.com>
9859 Date: Sat Jun 7 22:24:08 2014 -0700
9861 altoslib: TeleMega uses 5.6k/10k divider for v_batt
9863 I suspect the 15 and 27 values are a 'close approximation' for integer
9864 work on the cc1111 devices
9866 Signed-off-by: Keith Packard <keithp@keithp.com>
9868 commit ee2216af17f23781ea912caba29fbd7e4d9ff480
9869 Author: Keith Packard <keithp@keithp.com>
9870 Date: Sat Jun 7 22:23:19 2014 -0700
9872 altos: Enable ADC for TeleGPS v1.0 battery voltage measuring
9874 Signed-off-by: Keith Packard <keithp@keithp.com>
9876 commit ef85b3bc5300904ebfb878b1c7313a82b5b7aebf
9877 Author: Keith Packard <keithp@keithp.com>
9878 Date: Sat Jun 7 21:57:43 2014 -0700
9880 altos: Encode TeleGPS battery voltage in configuration packet
9882 TeleGPS doesn't need apogee delay, so re-purpose it for the battery voltage
9884 Signed-off-by: Keith Packard <keithp@keithp.com>
9886 commit d69547796caf74405f8304d23d4ae318315bbd7b
9887 Author: Keith Packard <keithp@keithp.com>
9888 Date: Sat Jun 7 21:13:40 2014 -0700
9890 altoslib: Parse TeleGPS state value from GPS telemetry packet
9892 TeleGPS adds 0x80 to the state value to signify that this otherwise
9893 unused byte contains the current state value
9895 Signed-off-by: Keith Packard <keithp@keithp.com>
9897 commit 428d09294ba0395fedd71346ad00fd90a4cdde97
9898 Author: Keith Packard <keithp@keithp.com>
9899 Date: Sat Jun 7 21:12:44 2014 -0700
9901 ao-tools: Parse TeleGPS state value from gps location packet
9903 TeleGPS encodes state in a spare gps location packet byte, masking in
9904 0x80 to signify that the state value is valid
9906 Signed-off-by: Keith Packard <keithp@keithp.com>
9908 commit 23d9d37fd2a8f4b867f34e71a2b0f7cb090717c1
9909 Author: Keith Packard <keithp@keithp.com>
9910 Date: Sat Jun 7 21:12:09 2014 -0700
9912 altos: Make telegps builds depend on ao_tracker.h
9914 Signed-off-by: Keith Packard <keithp@keithp.com>
9916 commit d165079b9275c69e727a1dac996ad1788c58ed40
9917 Author: Keith Packard <keithp@keithp.com>
9918 Date: Sat Jun 7 21:11:33 2014 -0700
9920 altos: Reduce tracker GPS buffer to 4 samples
9922 We just don't have enough RAM for 8 samples.
9924 Signed-off-by: Keith Packard <keithp@keithp.com>
9926 commit bd9e4f30b2a491b030246943767960ab053ac94c
9927 Author: Keith Packard <keithp@keithp.com>
9928 Date: Sat Jun 7 21:05:01 2014 -0700
9930 altos: Define lat/lon sum variables as 64-bit instead of 16
9932 Oops. 16 bits won't hold position information...
9934 Signed-off-by: Keith Packard <keithp@keithp.com>
9936 commit 08550425fca3da73d8f16de567a2c956b85d676e
9937 Author: Keith Packard <keithp@keithp.com>
9938 Date: Sat Jun 7 21:02:26 2014 -0700
9940 altos: Use 0x80 to indicate valid state value in the GPS location packet
9942 And only set this for tracker products; other products place state in
9943 separate state packets
9945 Signed-off-by: Keith Packard <keithp@keithp.com>
9947 commit d8b271502bfd1301b2244e3be5e8c9917a9c624a
9948 Author: Keith Packard <keithp@keithp.com>
9949 Date: Sat Jun 7 12:17:46 2014 -0700
9951 Set version to 1.3.2.3
9953 Mayhem 2014 Saturday 2014-6-7
9955 Signed-off-by: Keith Packard <keithp@keithp.com>
9957 commit d550c3b3eccbb0283c588b5df69edb2e9b44b4cc
9958 Author: Keith Packard <keithp@keithp.com>
9959 Date: Sat Jun 7 11:52:28 2014 -0700
9961 telegps: Track graph windows as one of the TeleGPS windows
9963 TeleGPS exits when the number of windows goes to zero; track graphing
9964 windows in addition to the usual flight monitoring windows.
9966 Signed-off-by: Keith Packard <keithp@keithp.com>
9968 commit 9f2189e0b99aa32b788ecb4576dcb9bcc926f4e2
9969 Author: Keith Packard <keithp@keithp.com>
9970 Date: Sat Jun 7 11:50:42 2014 -0700
9972 altosuilib: Fix crash when initializing site map cache
9974 Signed-off-by: Keith Packard <keithp@keithp.com>
9976 commit 611dc26ab4a3ee303c0253698b1e12931aa3644f
9977 Author: Keith Packard <keithp@keithp.com>
9978 Date: Sat Jun 7 11:50:04 2014 -0700
9980 altosuilib: Add GPS altitude as a possible graph value
9982 Signed-off-by: Keith Packard <keithp@keithp.com>
9984 commit 5617919091d4c4a1e627470ddab0b45cf649f7a1
9985 Author: Keith Packard <keithp@keithp.com>
9986 Date: Sat Jun 7 11:49:14 2014 -0700
9988 altosuilib: Show GPS instead of (missing) flight data for TeleGPS graphs
9990 Signed-off-by: Keith Packard <keithp@keithp.com>
9992 commit e0dfa934ba76d6f913af37999e05c20e614bd3e9
9993 Author: Keith Packard <keithp@keithp.com>
9994 Date: Sat Jun 7 11:47:11 2014 -0700
9996 altoslib: Record whether flight data includes sensor values in AltosFlightStats
9998 Provide a way to elide the usual flight data from a graph for TeleGPS
10000 Signed-off-by: Keith Packard <keithp@keithp.com>
10002 commit fcea12ac416b1eab11e9e8aae801358574308f73
10003 Author: Keith Packard <keithp@keithp.com>
10004 Date: Sat Jun 7 11:46:32 2014 -0700
10006 altoslib: Add TeleGPS log parsing code
10008 Signed-off-by: Keith Packard <keithp@keithp.com>
10010 commit 537db628c0223f0c1f797705a353857c696f8051
10011 Author: Keith Packard <keithp@keithp.com>
10012 Date: Sat Jun 7 11:44:55 2014 -0700
10014 altoslib: All products with logging have the 'l' command
10016 Instead of listing products with the 'l' command, just exclude
10017 products that don't have logging from using the 'l' command to collect
10018 the number of stored flights.
10020 Signed-off-by: Keith Packard <keithp@keithp.com>
10022 commit d562a5d3a6dfea334a66ee74893b400bdca09315
10023 Author: Keith Packard <keithp@keithp.com>
10024 Date: Sat Jun 7 11:44:07 2014 -0700
10026 altos: Switch TeleGPS to GPS logging format
10028 It's customized for TeleGPS uses
10030 Signed-off-by: Keith Packard <keithp@keithp.com>
10032 commit d71e6a5fc68d5b9bc1d12bbfc3fd5a4d86fb12f2
10033 Author: Keith Packard <keithp@keithp.com>
10034 Date: Sat Jun 7 11:41:59 2014 -0700
10036 altos: Update other CONFIG_EEPROM users to set LOG_ERASE_MARK
10038 All products placing config and erase marks in on-CPU EEPROM needs to
10039 configure the erase code correctly.
10041 Signed-off-by: Keith Packard <keithp@keithp.com>
10043 commit 394ab536257ab58de0190b3828dd3bb897ad4474
10044 Author: Keith Packard <keithp@keithp.com>
10045 Date: Sat Jun 7 11:40:41 2014 -0700
10047 altos: Write tracker logging from tracker thread directly
10049 Also, logs 8 pre-launch GPS packets so we can get the ground position.
10051 Signed-off-by: Keith Packard <keithp@keithp.com>
10053 commit db6003d34595fbd103d5b131912b6a797254f1c5
10054 Author: Keith Packard <keithp@keithp.com>
10055 Date: Sat Jun 7 11:39:10 2014 -0700
10057 altos: Write current flight state to GPS data from GPS drivers
10059 This will be useful with TeleGPS which has no other packet containing
10062 Signed-off-by: Keith Packard <keithp@keithp.com>
10064 commit 302842ccda46a0a3d58b60d5c7fc82e05f614b0b
10065 Author: Keith Packard <keithp@keithp.com>
10066 Date: Sat Jun 7 11:34:29 2014 -0700
10068 altos: Add TeleGPS logging format
10070 This is mostly like the mega format, but places the flight state in a
10071 spare byte of the GPS data and writes the gps starting location to the
10074 Log data is written by the main tracker thread; there's no reason for
10075 a separate thread given the GPS update rate and the lack of flight
10076 controls. This means ao_log_gps has an API to be called from there,
10077 rather than a thread to run.
10079 Signed-off-by: Keith Packard <keithp@keithp.com>
10081 commit 62aa51f0b785bea146d1e9331e6253de2d547c94
10082 Author: Keith Packard <keithp@keithp.com>
10083 Date: Sat Jun 7 11:01:14 2014 -0700
10085 altos/telemega-v1.0: Adjust config params to make flight erase work
10087 Flight erase records are supposed to be written after the ao_config to
10088 eeprom in telemega. They were getting written in the middle of one of
10089 the pyro channel config blocks. Put a bunch of space between the two
10090 by making the config max 1024 bytes instead of 128 bytes.
10092 Set the log erase marker to 0x55 -- eeprom comes from the factory as
10093 0x00, so we use any value other than 0x55 to indicate 'unused' erase
10096 Save space for more flight erase blocks; we've got plenty.
10098 Signed-off-by: Keith Packard <keithp@keithp.com>
10100 commit 5d973570ef2324b21a64477eecb0a292652ff467
10101 Author: Keith Packard <keithp@keithp.com>
10102 Date: Sat Jun 7 10:54:14 2014 -0700
10104 altos: Clear out eeprom erase records when writing entry 0
10106 When writing config/erase to eeprom, there's no 'erase' operation as
10107 on-chip eeprom is writable at a byte level. As such, we can't tell
10108 when the erase blocks get reset when the config gets written. When
10109 this happens, erase block 0 gets written explicitly, so just use that
10110 call to trigger explicit erasing of the data.
10112 Signed-off-by: Keith Packard <keithp@keithp.com>
10114 commit 1d6ca536c688d35b3cba0a829b04b93c5124b328
10115 Author: Keith Packard <keithp@keithp.com>
10116 Date: Sat Jun 7 10:09:51 2014 -0700
10118 altos: Allow value other than 0 for marking erased flights
10120 on-chip eeprom doesn't erase to 0xff, so let TeleMega use a different
10123 Signed-off-by: Keith Packard <keithp@keithp.com>
10125 commit b8a29d65ec605a995de1d1ec8b110d620d2f7a87
10126 Author: Keith Packard <keithp@keithp.com>
10127 Date: Sat Jun 7 10:05:21 2014 -0700
10129 altos: Allow AO_CONFIG_MAX_SIZE to be configured. Validate it.
10131 TeleMega config is 200 bytes. AO_CONFIG_MAX_SIZE was 128. That didn't
10132 work out well when logging erased flight information. Allow TeleMega
10133 to use a larger value (1k), and then do a compiler hack to make sure
10134 the defined value is at least as large as the ao_config structure.
10136 Signed-off-by: Keith Packard <keithp@keithp.com>
10138 commit 1873d539a8f1a0e1e8ad539af5d49a77a129b928
10139 Author: Keith Packard <keithp@keithp.com>
10140 Date: Sat Jun 7 07:41:11 2014 -0700
10142 altos: Move ao_tracker.c to kernel
10144 Doesn't make sense to be in product
10146 Signed-off-by: Keith Packard <keithp@keithp.com>
10148 commit 6a79fe8144dcab10294caa4b0eac967eeb0d8e7e
10149 Author: Keith Packard <keithp@keithp.com>
10150 Date: Thu Jun 5 21:42:10 2014 -0700
10152 altos: Add telegps-v1.0 code and loader
10154 Signed-off-by: Keith Packard <keithp@keithp.com>
10156 commit 0e867c67c8e2c40058ae36723e06b2ce00bd0419
10157 Author: Keith Packard <keithp@keithp.com>
10158 Date: Thu Jun 5 21:40:39 2014 -0700
10160 altos/telegps-v0.3: Remove ao_flight_number from main program
10162 We've got logging enabled now
10164 Signed-off-by: Keith Packard <keithp@keithp.com>
10166 commit f830d4e9202d2a138fc9aaacb2388f94390399db
10167 Author: Keith Packard <keithp@keithp.com>
10168 Date: Thu Jun 5 21:39:50 2014 -0700
10170 altos/telegps-v0.3: Disable APRS by default. Set log max to 1M
10172 And adjust default radio cal to be a bit closer
10174 Signed-off-by: Keith Packard <keithp@keithp.com>
10176 commit cab6d80f11e07dd26b865727eb7ce4fd45be5c7c
10177 Author: Keith Packard <keithp@keithp.com>
10178 Date: Thu Jun 5 21:37:38 2014 -0700
10180 altos: Force telemetry on by default for v0.3 TeleGPS boards
10182 These don't have a USB connect indicator, so just turn on telemetry by
10185 Signed-off-by: Keith Packard <keithp@keithp.com>
10187 commit 102b1977c138b30c2d2592ab310f7be072130a3b
10188 Author: Keith Packard <keithp@keithp.com>
10189 Date: Thu Jun 5 21:36:16 2014 -0700
10191 altos/lpc: HAS_USB_CONNECT has been changed to mean a custom pin
10193 The LPC stuff isn't actually very useful and TeleGPS uses a custom pin
10194 instead, and was using HAS_USB_CONNECT to mean the same thing. That
10197 Signed-off-by: Keith Packard <keithp@keithp.com>
10199 commit ec3de3ac461f2380d23c5c5d948333a9a210c400
10200 Author: Keith Packard <keithp@keithp.com>
10201 Date: Thu Jun 5 21:35:41 2014 -0700
10203 altos: Fix config to set default log size for all devices with log
10205 Not just devices with flight
10207 Signed-off-by: Keith Packard <keithp@keithp.com>
10209 commit d8f84ba82bab653c041eb85f93b9dcb1083bd849
10210 Author: Keith Packard <keithp@keithp.com>
10211 Date: Thu Jun 5 18:55:26 2014 -0700
10213 altos: Add AO_LOG_FLIGHT packet to TeleGPS logs
10215 This encodes the flight number for tracking of data files.
10217 Signed-off-by: Keith Packard <keithp@keithp.com>
10219 commit fe0aaf4413035f9de2c805c612c71188ec8c6f4d
10220 Author: Keith Packard <keithp@keithp.com>
10221 Date: Thu Jun 5 18:49:59 2014 -0700
10223 altos/telegps-v0.3: Add tracker task
10225 Signed-off-by: Keith Packard <keithp@keithp.com>
10227 commit 6160ddadeae324b4a68db800c98c339156b63076
10228 Author: Keith Packard <keithp@keithp.com>
10229 Date: Thu Jun 5 18:49:01 2014 -0700
10231 altos: Add debug to tracker to force launch
10233 This lets us test the move from pad to drogue state
10235 Signed-off-by: Keith Packard <keithp@keithp.com>
10237 commit 4a29df3f9f6c4969eb01598f6917ce78c9ce37a6
10238 Author: Keith Packard <keithp@keithp.com>
10239 Date: Thu Jun 5 18:47:27 2014 -0700
10241 altos: tracker distance computation flipped arguments around
10243 ao_distance takes (lat, lon, lat, lon) not (lat, lat, lon, lon)
10245 Signed-off-by: Keith Packard <keithp@keithp.com>
10247 commit b619199345256cdc456f8a0b99c0ad9335e877c7
10248 Author: Keith Packard <keithp@keithp.com>
10249 Date: Thu Jun 5 18:45:18 2014 -0700
10251 altos: Fix tracker start state
10253 Make sure log can start by scanning existing logs
10254 Enable RDF by default
10255 Turn off telemetry until we decide whether to turn it on in the loop
10256 Allow TeleGPS v0.3 to run without ADC
10258 Signed-off-by: Keith Packard <keithp@keithp.com>
10260 commit 97dac0f66bc938940e6b49409d950a1736c92655
10261 Author: Keith Packard <keithp@keithp.com>
10262 Date: Thu Jun 5 18:44:26 2014 -0700
10264 altos: Stick flight state in GPS location packets
10268 Signed-off-by: Keith Packard <keithp@keithp.com>
10270 commit eebcf07950e909e4516b08c32e289a870f772793
10271 Author: Keith Packard <keithp@keithp.com>
10272 Date: Thu Jun 5 18:35:45 2014 -0700
10274 altos: Have tracker average 5 GPS samples before moving to pad mode
10276 Avoids early GPS noise right after lock
10278 Signed-off-by: Keith Packard <keithp@keithp.com>
10280 commit e063701310c1ab5b766c27f24088699aad142fbd
10281 Author: Keith Packard <keithp@keithp.com>
10282 Date: Thu Jun 5 18:33:33 2014 -0700
10284 altos: Change tracker not-moving speed to 2m/s and document
10286 Just adjust to avoid sensing motion from GPS noise
10288 Signed-off-by: Keith Packard <keithp@keithp.com>
10290 commit d7df6e8c47df35c0d27f1a2559ecc305ef28d271
10291 Author: Keith Packard <keithp@keithp.com>
10292 Date: Thu Jun 5 18:31:06 2014 -0700
10294 altos: ao_distance was overflowing when checking for longitude wrap
10296 Need to shift everyone right one bit to fit in 32 bits
10298 Signed-off-by: Keith Packard <keithp@keithp.com>
10300 commit 2db2b75f8847ca0066bb19771653a65c9098ae52
10301 Author: Keith Packard <keithp@keithp.com>
10302 Date: Thu Jun 5 17:24:57 2014 -0700
10304 altos: Allow cc115l driver to be built without radio power control
10306 TeleGPS just wants full power, so remove the configuration option
10308 Signed-off-by: Keith Packard <keithp@keithp.com>
10310 commit b8201bc9ba4a5f5f0522b68493cd5e7f013fd4bb
10311 Author: Keith Packard <keithp@keithp.com>
10312 Date: Thu Jun 5 17:14:28 2014 -0700
10314 altos: Include sensor logging task only on flight boards
10316 This lets TeleGPS use the logging infrastructure without wasting a
10317 task to log sensor data
10319 Signed-off-by: Keith Packard <keithp@keithp.com>
10321 commit 3e28d8a242955d65d8cd50dbba4cad4609e2e1ae
10322 Author: Keith Packard <keithp@keithp.com>
10323 Date: Thu Jun 5 17:12:06 2014 -0700
10325 altos: Add tracker task for TeleGPS
10327 This replaces the flight code to monitor GPS state and switch flight
10328 states between startup/pad/drogue
10330 Signed-off-by: Keith Packard <keithp@keithp.com>
10332 commit 6e152dd5c0786a650aed8f0c09babdc93895bff1
10333 Author: Keith Packard <keithp@keithp.com>
10334 Date: Thu Jun 5 17:10:28 2014 -0700
10336 altos: Add ao_distance.c to compute cartesian distances on the globe
10338 This is not a great circle distance, but should be good enough for
10339 points reasonably close together
10341 Signed-off-by: Keith Packard <keithp@keithp.com>
10343 commit 8e7b8b0533e03e89425296d464b7a1a26fb63686
10344 Author: Keith Packard <keithp@keithp.com>
10345 Date: Thu Jun 5 16:52:36 2014 -0700
10347 telegps: Update icon and icon building
10349 Switch to satellite icon, build the osx and windows icons.
10351 Signed-off-by: Keith Packard <keithp@keithp.com>
10353 commit 1bcafc452f50e518c4d86cbd6b9057c4bf7e676f
10354 Author: Keith Packard <keithp@keithp.com>
10355 Date: Thu Jun 5 16:50:29 2014 -0700
10357 altosuilib: Let the user hand-edit the preload map radius
10359 In case they want more than 5
10361 Signed-off-by: Keith Packard <keithp@keithp.com>
10363 commit f59d69064763cfad2b4b15fd9660fd5fa21dba5e
10364 Author: Keith Packard <keithp@keithp.com>
10365 Date: Mon Jun 2 23:43:54 2014 -0700
10367 doc: Create release notes for version 1.4
10369 Signed-off-by: Keith Packard <keithp@keithp.com>
10371 commit cd2179cb0d71749f3637cc3ee03ccc6adfd74aae
10372 Author: Keith Packard <keithp@keithp.com>
10373 Date: Mon Jun 2 22:59:23 2014 -0700
10375 telegps: Trap AltosConfigDataException in telegps config
10377 This was added for pyro configuration errors in AltosUI
10379 Signed-off-by: Keith Packard <keithp@keithp.com>
10381 commit 5e4087cd2fbb3ac67f90cd82edaa73c1eedbf67c
10382 Author: Keith Packard <keithp@keithp.com>
10383 Date: Mon Jun 2 22:23:31 2014 -0700
10385 altoslib: Add missing AltosConfigDataException file
10387 commit ace5f42b5567cff07a61b622171ac364ea8c165d
10388 Author: Keith Packard <keithp@keithp.com>
10389 Date: Mon Jun 2 22:07:39 2014 -0700
10391 altosui: Display error message when parsing pyro channel values fails
10393 Build an exception handling chain to get numeric parse errors
10394 propagated all the way back to the original 'save' command and up into
10395 a dialog window, including the pyro channel, field and value that were
10398 Signed-off-by: Keith Packard <keithp@keithp.com>
10400 commit 206fbb99d28961ce159e3affdd5c96f5e379a603
10401 Author: Keith Packard <keithp@keithp.com>
10402 Date: Mon Jun 2 22:06:22 2014 -0700
10404 altosui: Fix pyro channel value formatting
10406 Was using %6.1f for 1 and 2 fraction digit values as the
10407 conditional structure for figuring out which format to use was
10410 Signed-off-by: Keith Packard <keithp@keithp.com>
10412 commit d20c608ce833fb8949dce527f92887775d216823
10413 Author: Keith Packard <keithp@keithp.com>
10414 Date: Mon Jun 2 22:05:11 2014 -0700
10416 altos: Fetch/store only 8 bits for pyro state values
10418 These fields are uint8_t, not int16_t. Fetching and storing 16 bits is
10421 Signed-off-by: Keith Packard <keithp@keithp.com>
10423 commit b7abc063fb27da29cd7a717bbea15f92882bd205
10424 Author: Keith Packard <keithp@keithp.com>
10425 Date: Mon Jun 2 22:04:11 2014 -0700
10427 altos: Maximum pyro configuration parameter has 4 bytes in the name
10429 "f>=" needs four bytes, not just three to store the whole string. If
10430 we only store three, then we never manage to compare correctly as the
10431 null terminating byte is missing.
10433 Signed-off-by: Keith Packard <keithp@keithp.com>
10435 commit 7385c76af46ff400b9e79a8540199be289cb57c0
10436 Author: Keith Packard <keithp@keithp.com>
10437 Date: Mon Jun 2 22:03:26 2014 -0700
10439 altos: Configuring pyro channels can use more than 48 characters
10441 Increase the command buffer from 48 to 128 bytes to hold the longest
10442 pyro configuration commands
10444 Signed-off-by: Keith Packard <keithp@keithp.com>
10446 commit 177d3c0333fd4218f01e05c78cbc5f186c8e32c0
10447 Author: Keith Packard <keithp@keithp.com>
10448 Date: Fri May 30 17:27:10 2014 -0700
10450 altos: Allow sparse GPS data logging for TeleGPS
10452 When the device hasn't moved for a while, stop logging data. Start as
10453 soon as it moves again.
10455 Signed-off-by: Keith Packard <keithp@keithp.com>
10457 commit 12c408c5aa1d234fe9c946078d8a343b4fda7ebb
10458 Author: Keith Packard <keithp@keithp.com>
10459 Date: Fri May 30 17:30:08 2014 -0700
10461 altos: Test APRS altitude encoding
10463 Verify fixed point version against naïve implementation
10465 Signed-off-by: Keith Packard <keithp@keithp.com>
10467 commit a7b0a5613c8e59b4c672b21f8d0890fd5cffd4dc
10468 Author: Keith Packard <keithp@keithp.com>
10469 Date: Fri May 30 17:24:51 2014 -0700
10471 altos: Switch APRS altitude encoding computation to fixed point
10473 APRS altitude is logarithmically encoded, so this implementation
10474 includes a fixed point log-base-2 function along with a bit of other
10475 fixed point stuff. This eliminates all floating point from TeleGPS,
10476 saving around 4kB of code space.
10478 Signed-off-by: Keith Packard <keithp@keithp.com>
10480 commit 2d9842ee011139f5783a102ceb2b7f4c88b1a10f
10481 Author: Keith Packard <keithp@keithp.com>
10482 Date: Fri May 30 17:17:42 2014 -0700
10484 telegps: Add config for tracker starting distances
10486 Signed-off-by: Keith Packard <keithp@keithp.com>
10488 commit 29d325f418b401f61580288b5947b0df8ac5b717
10489 Author: Keith Packard <keithp@keithp.com>
10490 Date: Thu May 29 22:03:48 2014 -0700
10492 telegps: Fixup windows fat build harder
10494 commit b74dfc9c2cbe14593738eb994e9163d466155326
10495 Author: Keith Packard <keithp@keithp.com>
10496 Date: Thu May 29 21:48:11 2014 -0700
10498 TeleGPS firmware isn't quite ready, don't include in windows fat build yet
10500 commit e60d0456f59c76ad786bc8f8065fbe84e6cae922
10501 Author: Keith Packard <keithp@keithp.com>
10502 Date: Thu May 29 21:37:53 2014 -0700
10504 Capture windows build error messages
10506 commit 48074131ad05b4646e5d2dcf30ba4a1d17e249f8
10507 Author: Keith Packard <keithp@keithp.com>
10508 Date: Thu May 29 16:39:26 2014 -0700
10510 telegps: Add missing TeleGPSGraphUI.java file
10512 Signed-off-by: Keith Packard <keithp@keithp.com>
10514 commit ca7e64a09823977e1af028e9482424e643beee68
10515 Author: Keith Packard <keithp@keithp.com>
10516 Date: Thu May 29 14:40:39 2014 -0700
10518 Build telegps distribution bits with 'make fat'
10520 Signed-off-by: Keith Packard <keithp@keithp.com>
10522 commit bf684a4c290573a3aa627fd8ddf6f6ebbe5fa057
10523 Author: Keith Packard <keithp@keithp.com>
10524 Date: Thu May 29 14:36:14 2014 -0700
10526 telegps: Add graph display
10528 Moved the altosui graph files to altosuilib and fixed things up.
10530 Signed-off-by: Keith Packard <keithp@keithp.com>
10532 commit f80075be4ebb9c5fe00c24b8c7638fad23267424
10533 Author: Keith Packard <keithp@keithp.com>
10534 Date: Thu May 29 14:03:58 2014 -0700
10536 java: Refactor AltosFlightDisplay units and font update handling
10538 Make AltosFlightDisplay explicitly implement AltosFontListener and
10539 AltosUnitsListener interfaces to make everyone use the same API. Then,
10540 actually go implement units listeners so that changing units updates
10541 all of the active displays immediately
10543 Signed-off-by: Keith Packard <keithp@keithp.com>
10545 commit 71715337eb532a1fbe1a753240e7417d5223489f
10546 Author: Keith Packard <keithp@keithp.com>
10547 Date: Thu May 29 10:16:15 2014 -0700
10549 telegps: Add info table
10551 Move a couple of files from altosui to altosuilib, hook up the info
10552 table after changing it to implement the AltosFlightDisplay interface
10554 Signed-off-by: Keith Packard <keithp@keithp.com>
10556 commit 13f84be8d1568a3fc2ed5eef5dcc2093c149285e
10557 Author: Keith Packard <keithp@keithp.com>
10558 Date: Wed May 28 22:53:06 2014 -0700
10560 telegps: Add flash device functionality
10562 Move bits from altosui to altosuilib and use those.
10564 Signed-off-by: Keith Packard <keithp@keithp.com>
10566 commit 8ba523cd793f2263bb1acd7a5a10f8964075bdc5
10567 Author: Keith Packard <keithp@keithp.com>
10568 Date: Wed May 28 22:45:23 2014 -0700
10570 telegps: Auto-connect to any base stations plugged in at startup
10572 Signed-off-by: Keith Packard <keithp@keithp.com>
10574 commit c30130d0bdc18ee351eb3d02e51f70f8a05905b1
10575 Author: Keith Packard <keithp@keithp.com>
10576 Date: Wed May 28 22:06:43 2014 -0700
10578 telegps: Don't try to ship TeleGPS firmware yet
10580 It's not quite ready. Instead, ship TBT and TD firmware.
10582 Signed-off-by: Keith Packard <keithp@keithp.com>
10584 commit 3871b9ac036e3adfa1da089245fc7973b268c921
10585 Author: Keith Packard <keithp@keithp.com>
10586 Date: Wed May 28 21:56:52 2014 -0700
10588 telegps: Add 'Info' tab
10590 This contains a summary of the tracking info, including position,
10593 Signed-off-by: Keith Packard <keithp@keithp.com>
10595 commit 4cec35564324f909dcddeb7c0d83a2daa8223042
10596 Author: Keith Packard <keithp@keithp.com>
10597 Date: Wed May 28 20:58:01 2014 -0700
10599 telegps: Hook up data download dialog
10601 Signed-off-by: Keith Packard <keithp@keithp.com>
10603 commit 9a4c2c7fc6af922d052e23a1b99bf847fbf9b0e9
10604 Author: Keith Packard <keithp@keithp.com>
10605 Date: Wed May 28 20:48:59 2014 -0700
10607 telegps: Add scan UI
10609 Move scan UI bits into altosuilib, allow telegps to not show telemetry
10612 Signed-off-by: Keith Packard <keithp@keithp.com>
10614 commit 82a69777c67128192b50bbf77ace0a6525f49cac
10615 Author: Keith Packard <keithp@keithp.com>
10616 Date: Wed May 28 20:24:04 2014 -0700
10618 telegps: Add preferences dialog
10620 Signed-off-by: Keith Packard <keithp@keithp.com>
10622 commit a7fd31842a602a8ac803d0e09efb4ffabf7a289b
10623 Author: Keith Packard <keithp@keithp.com>
10624 Date: Wed May 28 20:19:44 2014 -0700
10626 telegps: Add device configuration dialogs
10628 Signed-off-by: Keith Packard <keithp@keithp.com>
10630 commit d6c5904e2a05c8ae023a8cd954cf16c19c477d7d
10631 Author: Keith Packard <keithp@keithp.com>
10632 Date: Wed May 28 20:00:10 2014 -0700
10634 telegps: Use altosui's Instdrv NSIS plugin for telegps
10636 Instead of copying it, just point at it
10638 Signed-off-by: Keith Packard <keithp@keithp.com>
10640 commit fe14315d4cfccf8b53d9c4b7fa79302fd36b2c9a
10641 Author: Keith Packard <keithp@keithp.com>
10642 Date: Wed May 28 19:50:52 2014 -0700
10644 telegps: Working towards building fat versions of telegps application
10646 Lots more of the bits necessary for windows/macosx
10648 Signed-off-by: Keith Packard <keithp@keithp.com>
10650 commit 47ff6f7528e3984012e874f91ea4f5c1d68cb465
10651 Author: Keith Packard <keithp@keithp.com>
10652 Date: Wed May 28 19:45:01 2014 -0700
10654 doc: Add outline of TeleGPS doc
10656 No actual content, mostly a place holder to make the build work
10658 Signed-off-by: Keith Packard <keithp@keithp.com>
10660 commit e19121d5e7368ef723d4642d26c24252a386a790
10661 Author: Keith Packard <keithp@keithp.com>
10662 Date: Wed May 28 19:44:21 2014 -0700
10664 Mark version 1.3.2.2
10666 Preliminary 1.3.3 version (1.4?)
10668 Signed-off-by: Keith Packard <keithp@keithp.com>
10670 commit 2fa7785f9efdefaf0fc2fa8e0b03c85047613b84
10671 Author: Keith Packard <keithp@keithp.com>
10672 Date: Wed May 28 16:08:30 2014 -0700
10674 telegps: Add first version of telegps
10676 Not much implemented yet, but a shell of the UI and the map
10678 Signed-off-by: Keith Packard <keithp@keithp.com>
10680 commit 9b3516419981967a1c6ab956269139977ac368ca
10681 Author: Keith Packard <keithp@keithp.com>
10682 Date: Wed May 28 16:06:14 2014 -0700
10684 altosui/altosuilib: Shuffle lots more code from altosui into
10687 All of the bluetooth management stuff, and AltosSerial.
10689 Signed-off-by: Keith Packard <keithp@keithp.com>
10691 commit 02e657e45e217dc483a81f28020cfe65a826e9be
10692 Author: Keith Packard <keithp@keithp.com>
10693 Date: Wed May 28 10:43:09 2014 -0700
10695 Document the need for ~/altusmetrumllc/google-maps-api-key
10697 Stick this in Releasing
10699 Signed-off-by: Keith Packard <keithp@keithp.com>
10701 commit 9b9e4bf1b51c45553879141811748e65debfc251
10702 Author: Tom Marble <tmarble@info9.net>
10703 Date: Wed May 28 14:08:02 2014 -0500
10705 jenkins.sh: make -j 4 can fail, fix for altosui-test
10707 commit 96ffe5bbd2a1b44ddda6cb25d37d2b0a672045f5
10708 Author: Tom Marble <tmarble@info9.net>
10709 Date: Wed May 28 12:50:42 2014 -0500
10713 commit 5eaef0c98488fa3fbd3a6494dc15e1b793eb6f94
10714 Author: Tom Marble <tmarble@info9.net>
10715 Date: Wed May 28 12:38:36 2014 -0500
10719 commit 324380dcf86be338c6d556b901d6889ddde97f7e
10720 Author: Keith Packard <keithp@keithp.com>
10721 Date: Wed May 28 10:31:47 2014 -0700
10723 altosuilib: Don't try to draw to destroyed map windows
10725 Signed-off-by: Keith Packard <keithp@keithp.com>
10727 commit 1e5807ef428c9a0eb88ed8a3aef40098ab347d80
10728 Author: Keith Packard <keithp@keithp.com>
10729 Date: Wed May 28 10:27:52 2014 -0700
10731 altosuilib: Publish AltosSiteMap.centre. Add prefetchMaps with old API
10733 This gets altosui working again.
10735 Signed-off-by: Keith Packard <keithp@keithp.com>
10737 commit 52ce41952c5a3c31532fa4f0d1b3155a162b76f4
10738 Author: Keith Packard <keithp@keithp.com>
10739 Date: Wed May 28 10:16:38 2014 -0700
10741 altosuilib: Update map preloading UI to include zoom and maptypes
10743 This lets you specify precisely which maps to load.
10745 Signed-off-by: Keith Packard <keithp@keithp.com>
10747 commit 5c3991768d3cb17fc99ad32b2d6d8d11f0e37dfa
10748 Author: Keith Packard <keithp@keithp.com>
10749 Date: Wed May 28 02:18:41 2014 -0700
10751 altosuilib: Remove debug printf in AltosSiteMapCache
10753 Signed-off-by: Keith Packard <keithp@keithp.com>
10755 commit 4a5ef9eaa8b809c56813625133120e7e91fc8e65
10756 Author: Keith Packard <keithp@keithp.com>
10757 Date: Wed May 28 02:06:18 2014 -0700
10759 altoslib: When log-format is missing, use product
10761 log-format was added for 1.0; earlier log files don't include that,
10762 but do say which product they're from.
10764 Signed-off-by: Keith Packard <keithp@keithp.com>
10766 commit 3773e89c47d356c4df58edc5725c33bca89b9605
10767 Author: Keith Packard <keithp@keithp.com>
10768 Date: Wed May 28 00:42:24 2014 -0700
10770 altosuilib: Add google maps API key, configured with -with-google-key
10772 This places the actual key outside of the repository, allowing the
10773 user to configure the name of the file containing the key. By default,
10774 this pulls the key from $HOME/altusmetrumllc/google-maps-api-key.
10776 With the key present, there are no longer any rate limits to loading
10779 Signed-off-by: Keith Packard <keithp@keithp.com>
10781 commit e6cfa25702b3dc1d492c5f1a4d0b4ba4831d30bd
10782 Author: Keith Packard <keithp@keithp.com>
10783 Date: Tue May 27 20:34:29 2014 -0700
10785 altosuilib: Decompress map images asynchronously and in parallel
10787 This speeds up loading map images from disk quite a bit, and keeps the
10788 UI responsive while that happens as well.
10790 Signed-off-by: Keith Packard <keithp@keithp.com>
10792 commit 8e44580cbe978f1570d4d2ac13d3dd7cd470ecf7
10793 Author: Keith Packard <keithp@keithp.com>
10794 Date: Tue May 27 15:39:13 2014 -0700
10796 altosuilib: Add distance measuring line to site map.
10798 Use any modifier or button other than the left one to draw a line on
10799 the map. The length of the line is shown at the start of the line.
10801 Signed-off-by: Keith Packard <keithp@keithp.com>
10803 commit c674a20432c2cb97e5bc2a3de891f78b9e172fe9
10804 Author: Keith Packard <keithp@keithp.com>
10805 Date: Tue May 27 11:05:02 2014 -0700
10807 altos: Fake flight code changes in kernel and stm
10809 Redirects data input from local sensors to USB sourced data, leaving
10810 USB enabled when the computer goes into pad mode.
10812 Signed-off-by: Keith Packard <keithp@keithp.com>
10814 commit db08e99361d82de63058d3388823f486e5fc9839
10815 Author: Keith Packard <keithp@keithp.com>
10816 Date: Tue May 27 10:58:53 2014 -0700
10818 altosuilib: Add multiple zoom levels and content types to map
10820 Also changes the file format for hybrid, satellite and terrain maps to
10821 jpg to save disk space.
10823 Signed-off-by: Keith Packard <keithp@keithp.com>
10825 commit 535271f7312f1a88af11d4f1dbf3d405b660f26c
10826 Author: Keith Packard <keithp@keithp.com>
10827 Date: Sun May 25 21:14:42 2014 -0700
10829 altos/test: Fix ADC structure for mega, use ao_config.h
10831 This switches from hand-coding the ao_config structure to using
10832 ao_config.h and also updates the ADC structure for ao_flight_test_mega
10833 to using the same one as telemega does natively
10835 Signed-off-by: Keith Packard <keithp@keithp.com>
10837 commit 1894b51daceaf9fb6b49a0625e09a366985d15b6
10838 Author: Keith Packard <keithp@keithp.com>
10839 Date: Sun May 25 21:12:29 2014 -0700
10841 altos: Move ao_config declarations to ao_config.h
10843 No sense leaving these in ao.h, and it's nice to make that file smaller
10845 Signed-off-by: Keith Packard <keithp@keithp.com>
10847 commit 3d5db24708b37d86eac187169e2553a408dfeb83
10848 Author: Keith Packard <keithp@keithp.com>
10849 Date: Sun May 25 21:11:23 2014 -0700
10851 altos: Make MS5607 PROM a public variable
10853 This will let the fake flight code update it as necessary, without
10854 creating a new interface in ao_ms5607.c
10856 Signed-off-by: Keith Packard <keithp@keithp.com>
10858 commit 4df84dd5d007120f54cbda380789306608f2fc46
10859 Author: Keith Packard <keithp@keithp.com>
10860 Date: Sun May 25 21:08:44 2014 -0700
10862 micropeak: Add -Xlint:unchecked to javac line
10864 This shows missing parametric type errors
10866 Signed-off-by: Keith Packard <keithp@keithp.com>
10868 commit f0216d721ed13f4d3dc608bb6ad8f83732b27c0a
10869 Author: Keith Packard <keithp@keithp.com>
10870 Date: Sun May 25 21:01:38 2014 -0700
10872 altoslib/altosuilib: Change versions to altoslib:4, altosuilib:2
10874 API has changed for these libraries, time to bump the file versions
10876 Signed-off-by: Keith Packard <keithp@keithp.com>
10878 commit d63319f6f29ef714bb1d5c359c2448f63e7a4534
10879 Author: Keith Packard <keithp@keithp.com>
10880 Date: Sun May 25 20:58:24 2014 -0700
10882 ao-tools: Add cc_usb_write function
10884 This writes raw bytes to the USB port; useful for sending binary data
10885 for flashing or the upcoming flight test stuff.
10887 Signed-off-by: Keith Packard <keithp@keithp.com>
10889 commit 0a6c76fc0525d6588a1d88127f0085f13a02f1af
10890 Author: Keith Packard <keithp@keithp.com>
10891 Date: Sun May 25 20:55:11 2014 -0700
10893 altosui/altosuilib/altoslib: Move more stuff out of autosui. Reduce site map memory
10895 Prepare to share with TeleGPS application.
10897 This also has the changes to the site map tile which cache only a few
10898 images and regenerate the flight path on the fly, saving piles of memory
10900 Signed-off-by: Keith Packard <keithp@keithp.com>
10902 commit 4ac7797d3efb9cc2d9fae88519f55e40b1050224
10903 Author: Keith Packard <keithp@keithp.com>
10904 Date: Sun May 25 20:47:49 2014 -0700
10906 altosui/altosuilib: Cleanup -Xlint:unchecked warnings
10908 Add parametric types to avoid unchecked warnings.
10910 Signed-off-by: Keith Packard <keithp@keithp.com>
10912 commit b60a3689910731d9bdb8a431a3dcc9e99f961b35
10913 Author: Keith Packard <keithp@keithp.com>
10914 Date: Thu May 22 18:46:58 2014 -0700
10916 altoslib: Move CSV/KML output code to altoslib
10918 It's sharable, so share it
10920 Signed-off-by: Keith Packard <keithp@keithp.com>
10922 commit 2625a464417c8475c66101757ca2c30cd6c74e0c
10923 Author: Keith Packard <keithp@keithp.com>
10924 Date: Wed May 21 14:02:35 2014 -0700
10926 altos: Add config values for tracker start motion limits
10928 TeleGPS switches from 'pad' to 'drogue' states after the device moves
10929 a specified distance from the initial starting point. These values can
10930 be configured, and this is the configuration for them.
10932 Signed-off-by: Keith Packard <keithp@keithp.com>
10934 commit 161ae96f9ec11e2586df07c0f6d724ddc4dad76c
10935 Author: Keith Packard <keithp@keithp.com>
10936 Date: Wed May 21 14:00:05 2014 -0700
10938 altos/test: Parse mega ground data. Fix pyro parsing
10940 This gets ao_flight_test_mega working with eeprom files
10942 Signed-off-by: Keith Packard <keithp@keithp.com>
10944 commit 43be26603827b5930bf3e8082610cfa19b45534d
10945 Author: Keith Packard <keithp@keithp.com>
10946 Date: Wed May 21 13:58:54 2014 -0700
10948 altos/test: Get APRS generation test working again
10950 APRS now includes sat info, so we have to fake that up to generate an
10953 Signed-off-by: Keith Packard <keithp@keithp.com>
10955 commit 2a3846df381a5eeac8ec3327c770af502aaf4e76
10956 Author: Keith Packard <keithp@keithp.com>
10957 Date: Wed May 21 01:37:57 2014 -0700
10959 altos: Don't define ao_ignite_decivolt without igniters
10961 Signed-off-by: Keith Packard <keithp@keithp.com>
10963 commit af782e92c6a0c0a6b0fc2fa52519749a88ca8fb8
10964 Author: Keith Packard <keithp@keithp.com>
10965 Date: Wed May 21 01:36:40 2014 -0700
10967 altos: Expose ao_gps_set_rate from u-blox driver
10969 This lets applications set the desired GPS update rate to reduce power usage
10971 Signed-off-by: Keith Packard <keithp@keithp.com>
10973 commit 8b488bdd0f5c91be7e5aae1c8f0193e713734b14
10974 Author: Keith Packard <keithp@keithp.com>
10975 Date: Wed May 21 01:35:33 2014 -0700
10977 altos: Fix cc115l debug build
10979 New compiler warning flags and moving to the nxp require a few minor
10980 changes in the code to make it work.
10982 Signed-off-by: Keith Packard <keithp@keithp.com>
10984 commit cb228304d8df3063914ab505a530d4ea79ca027d
10985 Author: Keith Packard <keithp@keithp.com>
10986 Date: Wed May 21 01:34:27 2014 -0700
10988 altos: Allow APRS to send just battery voltage
10990 Don't require apogee and main voltages as well
10992 Signed-off-by: Keith Packard <keithp@keithp.com>
10994 commit ca338a897ba3237652a3ae092e660f26c9e35074
10995 Author: Keith Packard <keithp@keithp.com>
10996 Date: Wed May 21 01:39:46 2014 -0700
10998 altos/lpc: whitespace
11000 Signed-off-by: Keith Packard <keithp@keithp.com>
11002 commit 0a3312e725d914bbba6355e07d2f1d2833d2d6c2
11003 Author: Keith Packard <keithp@keithp.com>
11004 Date: Wed May 21 01:39:01 2014 -0700
11006 altos/lpc: adc code computes number of active ADC channels
11008 Don't require the application to provide AO_NUM_ADC when AO_ADC_NUM is
11009 computed automatically.
11011 Signed-off-by: Keith Packard <keithp@keithp.com>
11013 commit b278a73cb54ba2f107bf91089f87c11528f017ab
11014 Author: Keith Packard <keithp@keithp.com>
11015 Date: Wed May 21 01:41:38 2014 -0700
11017 altos/stm: Make stm applications depend on ao_boot.h
11019 This should make sure they get recompiled when boot stuff changes.
11021 Signed-off-by: Keith Packard <keithp@keithp.com>
11023 commit f3544daf08f38aa8e28ca214a19ab7fd47c0c802
11024 Author: Keith Packard <keithp@keithp.com>
11025 Date: Fri May 16 00:00:12 2014 -0600
11027 altosui: Remove another beep config debug printf
11029 Signed-off-by: Keith Packard <keithp@keithp.com>
11031 commit eeacc001ba089b4bf5552b8ef36e61a0a96efabe
11032 Author: Keith Packard <keithp@keithp.com>
11033 Date: Thu May 15 23:57:50 2014 -0600
11035 altosui: Remove debug printf about beep config
11037 Signed-off-by: Keith Packard <keithp@keithp.com>
11039 commit 6833e466d7d77765199bf4d21437c34a4eceb044
11040 Author: Keith Packard <keithp@keithp.com>
11041 Date: Thu May 15 23:46:41 2014 -0600
11043 altos: stm and lpc ao_boot.h were identical. move to kernel.
11045 These two files were absolutely identical, so share them by moving
11046 under kernel instead.x
11048 Signed-off-by: Keith Packard <keithp@keithp.com>
11050 commit 211d9af507daf9a8611ed1813415bee27e3839eb
11051 Author: Keith Packard <keithp@keithp.com>
11052 Date: Thu May 15 23:34:17 2014 -0600
11054 altos: Use explicit boot loader signal in ao_boot_reboot
11056 Instead of just "knowing" that ao_boot_loader will be passed zero when
11057 the application wants to get back to the boot loader, explicitly
11058 define the values so that both sides always agree.
11060 Signed-off-by: Keith Packard <keithp@keithp.com>
11062 commit 0bf1c74e83fe49a11916b52596363f4dd56c522c
11063 Author: Keith Packard <keithp@keithp.com>
11064 Date: Thu May 15 23:10:54 2014 -0600
11066 doc: Document the Apogee Lockout setting
11068 Signed-off-by: Keith Packard <keithp@keithp.com>
11070 commit dbb0fcf6d161a9d49fe699c37a18e4c33c409b59
11071 Author: Bdale Garbee <bdale@gag.com>
11072 Date: Thu May 15 17:20:39 2014 -0600
11074 include EasyMega Makefiles
11076 commit 0948f5d96456b2e7f57ad75dfc9ef455ba197163
11077 Author: Bdale Garbee <bdale@gag.com>
11078 Date: Thu May 15 17:19:08 2014 -0600
11082 commit 0fd608868aa03f81b2d902e1da13ee0b1ab20b78
11083 Author: Bdale Garbee <bdale@gag.com>
11084 Date: Thu May 15 16:23:17 2014 -0600
11086 lose the (old) easymega-v1.0 directory in favor of my fresher 0.1
11088 commit 819f73698f57e76dca50fe4fadccebd23ffb776d
11089 Author: Keith Packard <keithp@keithp.com>
11090 Date: Thu May 15 09:31:24 2014 -0600
11092 altos: Make quadrature debounce per-pin rather than per-device
11094 Debouncing per-pin means we don't lose transitions, which makes
11095 counting a lot more precise.
11097 Signed-off-by: Keith Packard <keithp@keithp.com>
11099 commit da13064382e9673e69cdfae6abbac253c9fc42fc
11100 Author: Keith Packard <keithp@keithp.com>
11101 Date: Thu May 15 09:30:32 2014 -0600
11103 altos/telemini-v2.0: Enable beep frequency configuration
11105 Now that there's space for this, add it in.
11107 Signed-off-by: Keith Packard <keithp@keithp.com>
11109 commit 36002fc724702d34302f3cc0df593019ca8db4e0
11110 Author: Keith Packard <keithp@keithp.com>
11111 Date: Thu May 15 09:29:52 2014 -0600
11113 altos/telemini-v2.0: Remove old baro->alt conversion table
11115 TeleMini doesn't have two baro sensors...
11117 Signed-off-by: Keith Packard <keithp@keithp.com>
11119 commit d0d29cc233b0d444782530fea15d957b2b4c45d7
11120 Author: Keith Packard <keithp@keithp.com>
11121 Date: Thu May 15 09:28:30 2014 -0600
11123 altos/cc1111: Switch P1_0 from a green LED to USB pullup
11125 Signed-off-by: Keith Packard <keithp@keithp.com>
11127 commit 3225fb54ec1beaf6dc8553ab4f5b86bea6bdf1f3
11128 Author: Keith Packard <keithp@keithp.com>
11129 Date: Thu May 15 09:27:34 2014 -0600
11131 altos/cc1111: Add support for CPU-driven USB pullup
11133 Signed-off-by: Keith Packard <keithp@keithp.com>
11135 commit 940ec6a2d5b054f68da39945a00f4d1b36d1b318
11136 Author: Keith Packard <keithp@keithp.com>
11137 Date: Tue May 13 22:46:19 2014 -0700
11139 altos/cc1111: Errata fix isn't needed for discontinued products
11141 And, doesn't fit in memory for some of them, so don't compile it.
11143 Signed-off-by: Keith Packard <keithp@keithp.com>
11145 commit feb0b5f8b28767197f87e5818812d6640c1f40e6
11146 Author: Keith Packard <keithp@keithp.com>
11147 Date: Tue May 13 17:30:47 2014 -0700
11149 altos/cc1111: Wait for xtal to be stable
11151 Errata http://www.ti.com/lit/er/swrz022c/swrz022c.pdf says that the
11152 xtal is stable bit is bogus and that you need to just delay for a while.
11154 Signed-off-by: Keith Packard <keithp@keithp.com>
11156 commit 8124af8c27b2b9e446aa3a4f1da83d4db7c1ea87
11157 Merge: 6dd7eae 3bcf4bd
11158 Author: Keith Packard <keithp@keithp.com>
11159 Date: Mon May 12 23:21:55 2014 -0700
11161 Merge remote-tracking branch 'origin/master'
11163 commit 6dd7eae5e4752d2098797e96953db8923e26835b
11164 Author: Keith Packard <keithp@keithp.com>
11165 Date: Mon May 12 23:20:08 2014 -0700
11167 ao-tools/ao-usbload: Check image flash usage against device flash availability
11169 For devices which report the range of valid flash addresses from their
11170 boot loader, check the loaded image to make sure it fits within that range.
11172 Signed-off-by: Keith Packard <keithp@keithp.com>
11174 commit 8a114bac1145359f3953ce70f049a6be71df5300
11175 Author: Keith Packard <keithp@keithp.com>
11176 Date: Mon May 12 23:18:41 2014 -0700
11178 altos/flash-loader: Check memory addresses against flash space
11180 This validates memory read/write requests to make sure they are within
11181 the available flash memory space.
11183 This also reports the flash base and bounds addresses in the 'version'
11184 command so that the loader can validate the image before attempting to
11187 Signed-off-by: Keith Packard <keithp@keithp.com>
11189 commit a25c34ef0a92beaa0695e0d0020eda5e26b309e2
11190 Author: Keith Packard <keithp@keithp.com>
11191 Date: Mon May 12 22:56:38 2014 -0700
11193 altos/stm: Use #define'd constants for GPIO register addresses
11195 This lets the compiler short-circuit the tests in ao_enable_gpio and
11196 ao_disable_gpio to save a bit of code space and time.
11198 Signed-off-by: Keith Packard <keithp@keithp.com>
11200 commit 530894f508874f4cb3db644ca9ca679ed704f964
11201 Author: Keith Packard <keithp@keithp.com>
11202 Date: Mon May 12 22:55:38 2014 -0700
11204 altos/stm: Figure out available flash space based on chip id registers
11206 Look at the flash size and the device id registers to figure out how
11207 much flash is available.
11209 Signed-off-by: Keith Packard <keithp@keithp.com>
11211 commit 2c543be5548ccda6bd29a2a7659fcc287f7a9f07
11212 Author: Keith Packard <keithp@keithp.com>
11213 Date: Mon May 12 22:54:35 2014 -0700
11215 altos/stm: White space fix in ao_boot_pin.c
11217 commit 2f196323a2829f9537f3b339f19478127ffde623
11218 Author: Keith Packard <keithp@keithp.com>
11219 Date: Mon May 12 22:53:07 2014 -0700
11221 altos/stm: Use flash address of boot loader instead of 0x0
11223 Flash is at 0x08000000, but when the chip boots, it can be at 0x0 as
11224 well. Use the 0x08000000 address when rebooting to flash
11226 Signed-off-by: Keith Packard <keithp@keithp.com>
11228 commit 6a6053dfed6fc1a7f50be0c62782d0050758cd0b
11229 Author: Keith Packard <keithp@keithp.com>
11230 Date: Mon May 12 22:51:50 2014 -0700
11232 altos: Assume all LPC products will have 32KB of flash
11234 If we ever use something smaller than this, we'll need to figure out
11235 how to tell how much memory the device has.
11237 Signed-off-by: Keith Packard <keithp@keithp.com>
11239 commit d1908101241b1002fbc582b0a2c27045065a6615
11240 Author: Keith Packard <keithp@keithp.com>
11241 Date: Mon May 12 22:51:16 2014 -0700
11243 altos: Report amount of program space available in the version command
11245 Signed-off-by: Keith Packard <keithp@keithp.com>
11247 commit 3af4e824938fe07fe75c6d24d9906aebfbe578f3
11248 Author: Keith Packard <keithp@keithp.com>
11249 Date: Mon May 12 22:50:41 2014 -0700
11251 altos: Add LED test command to pca9922 driver
11253 This lets you control the LEDs from the command line to test things.
11255 Signed-off-by: Keith Packard <keithp@keithp.com>
11257 commit 47750e236c45ab03f28fc3393996edb2bd4312e3
11258 Author: Keith Packard <keithp@keithp.com>
11259 Date: Mon May 12 22:49:39 2014 -0700
11261 ao-bringup: Use official binaries for EasyMini turnon
11263 Don't use locally built ones, use the official ones found in
11264 ~/altusmetrumllc/Binaries to ensure that all devices are shipped with
11267 Signed-off-by: Keith Packard <keithp@keithp.com>
11269 commit 5f4a1b3e553276a4d6727c111fe290fa3690fa1e
11270 Author: Keith Packard <keithp@keithp.com>
11271 Date: Mon May 12 22:48:45 2014 -0700
11273 ao-bringup: test-baro should accept altitudes a bit below sea level
11275 Testing baro sensors on a particularly high pressure day at Keith's
11276 house yields altitudes down to -20m or so.
11278 Signed-off-by: Keith Packard <keithp@keithp.com>
11280 commit 238ddde1ffdb8521d06519306cfb76271ae552b9
11281 Author: Keith Packard <keithp@keithp.com>
11282 Date: Mon May 12 22:47:55 2014 -0700
11284 atosui: Hide Callsign and RSSI tabs for devices without a radio
11286 When doing Monitor Idle with EasyMini, it's nice to not put fields on
11287 the screen which won't ever have useful data in them.
11289 Signed-off-by: Keith Packard <keithp@keithp.com>
11291 commit 3bcf4bdd3e3f3751ad9d517696b5573dd4593846
11292 Author: Bdale Garbee <bdale@gag.com>
11293 Date: Mon May 12 17:31:14 2014 -0600
11295 update TeleMega turn-on script and Releasing for new stable firmware home
11297 commit cbb6f7a3abbde39163f2905badba0ae88744b104
11298 Author: Bdale Garbee <bdale@gag.com>
11299 Date: Fri May 9 12:30:25 2014 -0600
11303 commit 8d9c79f5c162e07d57d42c6ba5825a3327a911d5
11304 Author: Keith Packard <keithp@keithp.com>
11305 Date: Fri May 9 00:05:39 2014 -0700
11307 altos: Simplify quadrature tracking
11309 Set the timer to 200Hz for a 5ms debounce interval. Then, simply look
11310 for transitions ending in both bits in the encoder being off, which
11311 indicates the the encoder is resting in a detent. If bit '2' is
11312 turning off, the encoder was rotated clockwise, otherwise the encoder
11313 was rotated counter clockwise.
11315 This is a lot more reliable, although still not perfect.
11317 Signed-off-by: Keith Packard <keithp@keithp.com>
11319 commit ef48e1bb73c791d731b0d2c0e5beef1539103049
11320 Author: Keith Packard <keithp@keithp.com>
11321 Date: Mon May 5 23:46:34 2014 -0700
11323 altos: Clean up trailing whitespace in ao_pad.c
11325 Signed-off-by: Keith Packard <keithp@keithp.com>
11327 commit c8ad50495e2d81209a4882dd4f82c19d9ae2ac34
11328 Author: Keith Packard <keithp@keithp.com>
11329 Date: Mon May 5 23:45:30 2014 -0700
11331 altos: Fix byte offsets in the mega AO_LOG_FLIGHT packets
11333 Just comments, but even those should be correct
11335 Signed-off-by: Keith Packard <keithp@keithp.com>
11337 commit b22dff94778b1f15a6ad1989d526b936f0fa09ea
11338 Author: Keith Packard <keithp@keithp.com>
11339 Date: Mon May 5 23:43:44 2014 -0700
11341 altos: ublox driver always offers course data when it has a fix
11343 Set the AO_GPS_COURSE_VALID bit to signal that this part of the GPS
11346 Signed-off-by: Keith Packard <keithp@keithp.com>
11348 commit c9d6a1fbb3148f03864df6d1ed5f6b6dccd7b383
11349 Author: Keith Packard <keithp@keithp.com>
11350 Date: Mon May 5 23:41:43 2014 -0700
11352 altosui: Add GPS course, ground speed and climb rate to graphs
11354 Signed-off-by: Keith Packard <keithp@keithp.com>
11356 commit 39fbc4cb1d4c92522c90aa5e36fd62a4827d8306
11357 Author: Keith Packard <keithp@keithp.com>
11358 Date: Mon May 5 23:38:44 2014 -0700
11360 altoslib: Parse remaining mega AO_LOG_FLIGNT and AO_LOG_GPS_TIME fields
11362 GPS fields past 'day' were not getting parsed. Ground values for the
11363 IMU were not getting parsed, but a false 'temperature' value was being read.
11365 Signed-off-by: Keith Packard <keithp@keithp.com>
11367 commit d2e6efa810b7fccc5af937386a40ae5af064bf26
11368 Author: Keith Packard <keithp@keithp.com>
11369 Date: Mon May 5 23:38:05 2014 -0700
11371 altoslib: Add a comment to remind us to fix the IMU code to deal with calibration
11373 Signed-off-by: Keith Packard <keithp@keithp.com>
11375 commit d59d6787bfe26c3b18491ece602ad6cc5cf26c42
11376 Author: Keith Packard <keithp@keithp.com>
11377 Date: Sat May 3 10:58:31 2014 -0700
11379 altos: 8051 64 * 16 multiply function was broken for negative 64-bit
11381 It was jumping around the actual multiply when the 64-bit argument was negative.
11383 Signed-off-by: Keith Packard <keithp@keithp.com>
11385 commit c49e13a7807a74bb66c83cd4a2e10eb601f59e62
11386 Author: Bdale Garbee <bdale@gag.com>
11387 Date: Thu May 8 16:24:26 2014 -0600
11389 relay control implemented, this project is now complete
11391 commit acaad70e3db8f0b6ae45ca8309833db57bdf5ca2
11392 Author: Bdale Garbee <bdale@gag.com>
11393 Date: Thu May 8 16:09:11 2014 -0600
11395 first cut of usbrelay-v0.1 support .. LEDs wiggle, not switching relay yet
11397 commit 2dfc4bc92b11252f17103f28198a702a3fdc2b2d
11398 Author: Keith Packard <keithp@keithp.com>
11399 Date: Fri May 2 13:53:08 2014 -0700
11401 altosui: Add configuration UI for beeper tone
11403 Signed-off-by: Keith Packard <keithp@keithp.com>
11405 commit 027b1470c7a2d007eaab5c8d49f772b0c7559b80
11406 Author: Keith Packard <keithp@keithp.com>
11407 Date: Fri May 2 12:26:07 2014 -0700
11409 altos: Add configurable beep tone
11411 This lets you directly set the mid-range beep tone; the high and low
11412 tones remain set off of that in the same ratio as before.
11414 Note that none of the cc1111 products get this feature as they don't
11415 have enough flash space anymore...
11417 Signed-off-by: Keith Packard <keithp@keithp.com>
11419 commit 8e3842660274ac4bcd7b5a78f5db215222b1c4de
11420 Author: Keith Packard <keithp@keithp.com>
11421 Date: Wed Apr 30 22:14:37 2014 -0700
11423 altos: For telelco discovery packets, retry 5 times with shorter timeout
11425 A timeout of 10ms is more than enough to receive a query packet, but
11426 if we miss it during device discovery, it's a pain, so retry 5 times
11427 to make sure we find everyone.
11429 Signed-off-by: Keith Packard <keithp@keithp.com>
11431 commit 0223fced2c6d2b9f63ede6258afae46c3f55c200
11432 Author: Keith Packard <keithp@keithp.com>
11433 Date: Wed Apr 30 22:13:44 2014 -0700
11435 ao-tools: Clean up ao-sym structure an initializers
11437 Remove unused 'default_addr' field. Use named initializers when
11438 setting up the struct.
11440 Signed-off-by: Keith Packard <keithp@keithp.com>
11442 commit 35efd4e51ece706234f80c076eb7f4f70c66098d
11443 Author: Keith Packard <keithp@keithp.com>
11444 Date: Wed Apr 30 22:12:30 2014 -0700
11446 ao-load: Make ao_sym static to avoid collision with ao-editaltos
11448 ao-load doesn't use ao-editaltos at this point, but does share the
11449 same name for the symbol table. To make the linker happier, make the
11450 ao-load version static.
11452 Signed-off-by: Keith Packard <keithp@keithp.com>
11454 commit fd406000659a11862e05c22dbb20cdb738f56b01
11455 Author: Keith Packard <keithp@keithp.com>
11456 Date: Wed Apr 30 22:11:39 2014 -0700
11458 ao-telem: Dump orientation field from TeleMega sensor telemetry packet
11460 Signed-off-by: Keith Packard <keithp@keithp.com>
11462 commit 2cf65d60e1c73dbff0badbe1ee6cb43d75bf803c
11463 Author: Keith Packard <keithp@keithp.com>
11464 Date: Wed Apr 30 22:10:29 2014 -0700
11466 altosui: Mark TeleMega additional pyro ignitor fired points in graphs
11468 Add markers to indicate when each additional pyro channel fires
11470 Signed-off-by: Keith Packard <keithp@keithp.com>
11472 commit ecebb3902868d1d7485d2bc99ba4140c6b90567e
11473 Author: Keith Packard <keithp@keithp.com>
11474 Date: Wed Apr 30 21:30:46 2014 -0700
11476 altoslib: Track pyro firing state when reading mega eeprom files
11478 TeleMega records whether each pyro has been fired in the eeprom file;
11479 track that in the AltosState record.
11481 Signed-off-by: Keith Packard <keithp@keithp.com>
11483 commit 5fb246fb50e262aa81ef7eb430be9782cfcf8848
11484 Author: Keith Packard <keithp@keithp.com>
11485 Date: Tue Apr 29 19:04:30 2014 -0700
11487 altosui: Add extra ignitors to graphable objects
11489 List all of the available extra ignitors as possible things to graph.
11491 Signed-off-by: Keith Packard <keithp@keithp.com>
11493 commit f8429152e438eb72618edaf5983ae1cd5d3d4dab
11494 Author: Bdale Garbee <bdale@gag.com>
11495 Date: Sun Apr 13 08:58:36 2014 -0600
11497 ugly hack (just make sleep longer) to work around ttyACM* discovery issue
11499 commit 3b5c4d88671e6c511fbfb1ce6b046f558dd6c2bf
11500 Author: Keith Packard <keithp@keithp.com>
11501 Date: Sat Apr 12 17:46:34 2014 -0700
11503 altos: Switch beeping to farnsworth spacing
11505 Use 17wpm/12wpm farnsworth spacing for the state reports. Leave the
11506 numeric reports running slowly as those require counting.
11508 Signed-off-by: Keith Packard <keithp@keithp.com>
11510 commit 8628f7e02834a476d5cb3afa4cbf8d46a4b3c513
11511 Author: Keith Packard <keithp@keithp.com>
11512 Date: Sat Apr 12 17:45:38 2014 -0700
11514 altosuilib: Make lines in graphs 2 units wide
11516 This makes the graphs a lot easier to read.
11518 Signed-off-by: Keith Packard <keithp@keithp.com>
11520 commit 9e18c524fa2d1f648f265b3c3105f5ceacf06c10
11521 Author: Keith Packard <keithp@keithp.com>
11522 Date: Fri Apr 11 16:40:06 2014 -0700
11524 altoslib/altosui/altosuilib/libaltos: Remove trailing whitespace
11526 Just cleaning up the source code.
11528 Signed-off-by: Keith Packard <keithp@keithp.com>
11530 commit 7b275ddfe20f54857d7d1abb98607c406b678090
11531 Author: Keith Packard <keithp@keithp.com>
11532 Date: Fri Apr 11 16:31:32 2014 -0700
11534 altos: Add 'microwater' product
11536 This is a custom firmware spin for micropeak designed for use with
11537 water rockets that sets the boost detect altitude to 10m instead of 30m.
11539 Signed-off-by: Keith Packard <keithp@keithp.com>
11541 commit 99c729495a8cc589718607ee35d22454c6af2994
11542 Author: Keith Packard <keithp@keithp.com>
11543 Date: Sun Apr 6 23:46:48 2014 -0700
11545 altosui: Disable flight log configuration while flights are stored
11547 The log code won't let you resize the maximum flight log while there
11548 is still data on the flight computer; the code to figure that out in
11549 the UI was busted, leaving users confused about why it wasn't working.
11551 Signed-off-by: Keith Packard <keithp@keithp.com>
11553 commit 4211c59e585545817b3cac02b41bb73106d6403e
11554 Author: Keith Packard <keithp@keithp.com>
11555 Date: Sun Apr 6 22:27:37 2014 -0700
11557 altos: Fix nanopeak compile
11559 Nanopeak uses port B bit 3 for the LED instead of bit 4. Fix the async
11560 code to support arbitrary bits for the serial LED.
11562 Signed-off-by: Keith Packard <keithp@keithp.com>
11564 commit 350d941a825d0271933de0bfdea82d3af5744c21
11565 Author: Keith Packard <keithp@keithp.com>
11566 Date: Sun Apr 6 20:14:49 2014 -0700
11568 altos: Provide stable binaries for MicroPeak
11570 Publish MicroPeak .hex file to LLC repo and install it from there,
11571 rather than rebuilding it locally. This ensures that the installed
11572 bits don't depend on local configuration of any kind.
11574 Signed-off-by: Keith Packard <keithp@keithp.com>
11576 commit 2427eae5f3b429d302fbe14f708dcbc68c851954
11577 Author: Keith Packard <keithp@keithp.com>
11578 Date: Sun Apr 6 19:48:07 2014 -0700
11580 altos: Replace C code attiny async output with inline asm
11582 Using inline asm instead of C ensures that compiler changes will not
11583 affect the timing of the serial data.
11585 Signed-off-by: Keith Packard <keithp@keithp.com>
11587 commit 1d943d4cade0a40723143626abf6e67f8eca9dcb
11588 Author: Keith Packard <keithp@keithp.com>
11589 Date: Sat Apr 5 18:17:17 2014 -0700
11591 altos: Build TeleBalloon v2.0 by default
11593 We're supporting this now, we might as well build it.
11595 Signed-off-by: Keith Packard <keithp@keithp.com>
11597 commit c14cfb1436c988eb0a0d26d7c4d83aeccecbc8a3
11598 Author: Keith Packard <keithp@keithp.com>
11599 Date: Sat Apr 5 18:16:21 2014 -0700
11601 ao-bringup: Split out easymini test into separate script
11603 This lets you run the easy mini testing code without also flashing the device.
11605 Signed-off-by: Keith Packard <keithp@keithp.com>
11607 commit 9cb10d73fee0e3f36c778fd2a9c9992b87669fe2
11608 Author: Keith Packard <keithp@keithp.com>
11609 Date: Sat Apr 5 18:14:35 2014 -0700
11611 altosui: Add ignitor tab for TeleMega extra ignitors
11613 Show the current state of the additional ignitors in another tab;
11614 there's not really room in the 'Pad' tab.
11616 Signed-off-by: Keith Packard <keithp@keithp.com>
11618 commit ca66a035edecd7feffcd22257d3413ce0e189c07
11619 Author: Keith Packard <keithp@keithp.com>
11620 Date: Sat Apr 5 00:28:13 2014 -0700
11622 doc: Document new voltage beeping at startup time
11624 commit 18148c33540cda8cb6658724a048ffd426c1a6bb
11625 Author: Keith Packard <keithp@keithp.com>
11626 Date: Sat Apr 5 00:20:22 2014 -0700
11628 Bump version to 1.3.3
11630 Signed-off-by: Keith Packard <keithp@keithp.com>
11632 commit 0d367fc24bfd0377db6f3b00a888a18245616767
11633 Author: Keith Packard <keithp@keithp.com>
11634 Date: Sat Apr 5 00:18:57 2014 -0700
11636 altos: Report battery voltage instead of S at startup
11638 This works on everything with a beeper except TeleMetrum v1.0 which
11639 just doesn't have enough flash space for the code.
11641 Signed-off-by: Keith Packard <keithp@keithp.com>
11643 commit 8bd732ac9cb816630f46dd269448ff8422620df8
11644 Author: Keith Packard <keithp@keithp.com>
11645 Date: Fri Apr 4 23:40:22 2014 -0700
11647 doc: Outline files are now generated, so don't put them in git
11649 Signed-off-by: Keith Packard <keithp@keithp.com>
11651 commit ca4b20f9781b1dc6974d26952973dfe0d607478c
11652 Author: Keith Packard <keithp@keithp.com>
11653 Date: Fri Apr 4 23:38:40 2014 -0700
11655 ao-tools: Wait for device to become ready instead of failing
11657 For some reason, USB devices take 'a while' to become usable; instead
11658 of bailing immediately, sit around waiting to see if the device
11659 becomes usable if we get an EBUSY or EACCES error.
11661 Signed-off-by: Keith Packard <keithp@keithp.com>
11663 commit 2424c0e6fe53789dc83d1e96439dcdc13e847b07
11664 Author: Keith Packard <keithp@keithp.com>
11665 Date: Fri Apr 4 23:37:15 2014 -0700
11667 ao-tools: Use 'program' command in ao-flash-lpc instead of 'flash'
11669 The program meta-command is supposed to do the whole thing, and seems
11670 more reliable in actually getting what we want flashed to the board.
11672 Signed-off-by: Keith Packard <keithp@keithp.com>
11674 commit 4800497fa1fc449807ef0097cc3fed367641ae29
11675 Author: Keith Packard <keithp@keithp.com>
11676 Date: Fri Apr 4 23:36:34 2014 -0700
11678 ao-bringup: Get turnon_telemini working
11680 This script now does complete testing of the board
11682 Signed-off-by: Keith Packard <keithp@keithp.com>
11684 commit 24167015705ae831692b95735968b04a876f935e
11685 Author: Keith Packard <keithp@keithp.com>
11686 Date: Fri Apr 4 23:34:48 2014 -0700
11688 altos: Rename 'core' to 'kernel'
11690 core remains a bad name to use -- dirvish skips files (and
11691 directories, it seems) with that name.
11693 Signed-off-by: Keith Packard <keithp@keithp.com>
11695 commit bb9fdef607728cc326a82aa632e59724f272e53b
11696 Author: Keith Packard <keithp@keithp.com>
11697 Date: Thu Apr 3 00:10:19 2014 -0700
11699 altoslib: Missed a couple of easy mini voltage API changes
11701 Oh, and Tm was using Em conversions (which is almost right, except Tm
11702 doesn't have the history)
11704 Signed-off-by: Keith Packard <keithp@keithp.com>
11706 commit 834cd051af1b80a98678de221d3c45cb30f8bb0d
11707 Author: Keith Packard <keithp@keithp.com>
11708 Date: Wed Apr 2 23:35:36 2014 -0700
11710 Add easymini turnon script and helpers
11712 Signed-off-by: Keith Packard <keithp@keithp.com>
11714 commit 21d584b9bf93b96a05ab374105493c0e17df320f
11715 Author: Keith Packard <keithp@keithp.com>
11716 Date: Wed Apr 2 22:04:18 2014 -0700
11718 altoslib: Fix EasyMini voltage computations
11720 Early Em prototypes had a 3.0V regulator.
11721 Early v1.0 boards measured power past the blocking diode.
11723 Deal with both conditions to try and report more accurate voltages for
11726 Signed-off-by: Keith Packard <keithp@keithp.com>
11728 commit adddad0dd45f67d01487c8dd75b040ca3ab50fe2
11729 Author: Keith Packard <keithp@keithp.com>
11730 Date: Wed Apr 2 20:36:26 2014 -0700
11732 altoslib: Ignore speed/accel after boost when finding maxima
11734 Large spikes in acceleration often occur with ejection charges, which
11735 can cause bogus acceleration and speed data to be seen. Ignore those
11736 for the purpose of computing the maximum values of each.
11738 Signed-off-by: Keith Packard <keithp@keithp.com>
11740 commit ff4deb417a460d96645fb6934890c2c195142be3
11741 Author: Keith Packard <keithp@keithp.com>
11742 Date: Fri Mar 28 23:33:25 2014 -0700
11744 altos: HAS_LED is useless; remove it
11746 ao_flight was trying to decide whether to turn off the red LED by
11747 checking whether HAS_LED was defined. And yet, none of the flight
11748 firmware defines that anymore, except for easymini which defines it to
11751 Remove all uses and defines of this value, substituting AO_LED_RED in
11752 ao_flight.c, which has to be defined for the ao_led_off call to work.
11754 Signed-off-by: Keith Packard <keithp@keithp.com>
11756 commit ca0bf9fb2d6323d7a454e5ce04b48d11366eee67
11757 Author: Keith Packard <keithp@keithp.com>
11758 Date: Sun Mar 16 18:12:33 2014 -0700
11760 Add easymega firmware
11762 A trimmed down TeleMega build with no radio or GPS, along with pin
11763 changes necessary for the device.
11765 Signed-off-by: Keith Packard <keithp@keithp.com>
11767 commit 7e0b549b9b30d0a1290d28b2b94025a98af6a4de
11768 Author: Keith Packard <keithp@keithp.com>
11769 Date: Mon Mar 10 22:55:45 2014 -0700
11771 altosui: Hide Tilt Angle values when not available
11773 In the Ascent table, make sure the tilt angle fields are hidden when
11774 they are set to MISSING.
11776 Signed-off-by: Keith Packard <keithp@keithp.com>
11778 commit 3b50e50fb814a572f7b4ea9e268a1ae150fe678c
11779 Author: Keith Packard <keithp@keithp.com>
11780 Date: Sun Mar 9 21:10:10 2014 -0700
11782 altos: Another missing usbtrng file
11784 commit b5ac64bc0a6fd0fc23f39283e469c9820bdc88fe
11785 Author: Keith Packard <keithp@keithp.com>
11786 Date: Sun Mar 9 21:08:25 2014 -0700
11788 altos: Missing ao_pins files for usbtrng
11790 Signed-off-by: Keith Packard <keithp@keithp.com>
11792 commit 469bd376d84bf8d76faa3b726d96061d4d98b998
11793 Author: Keith Packard <keithp@keithp.com>
11794 Date: Sun Mar 9 20:59:43 2014 -0700
11796 altos: Fix LPC LED driver
11798 Was using wrong types
11800 Signed-off-by: Keith Packard <keithp@keithp.com>
11802 commit 6a4a074d690fb34af49704ac3cc4826eaf06dd9d
11803 Author: Keith Packard <keithp@keithp.com>
11804 Date: Sun Mar 9 20:58:36 2014 -0700
11806 altos: fix building LPC serial support for STDIO
11808 Signed-off-by: Keith Packard <keithp@keithp.com>
11810 commit 9671ca6c42544463fd551f81113c221265a2296e
11811 Author: Keith Packard <keithp@keithp.com>
11812 Date: Sun Mar 9 20:57:31 2014 -0700
11814 altos: Don't require projects to define PACKET_HAS_SLAVE
11816 Really, most don't need it, and whinging about not having it defined
11819 Signed-off-by: Keith Packard <keithp@keithp.com>
11821 commit e1e00a4b67fbdbae339219b35aefd44a1bcf9486
11822 Author: Keith Packard <keithp@keithp.com>
11823 Date: Sat Mar 8 21:39:33 2014 -0800
11825 Add USB True Random Number Generator product
11827 Just basic device support
11829 Signed-off-by: Keith Packard <keithp@keithp.com>
11831 commit 6dad9ca543fbed3f849b01300224b1b21ef2eb08
11832 Author: Keith Packard <keithp@keithp.com>
11833 Date: Sat Mar 8 16:25:33 2014 -0800
11835 Re-add LCD bits to stm-demo
11837 commit 32f0f39a953dabe19ec92611570e4a82da8f8dce
11838 Author: Keith Packard <keithp@keithp.com>
11839 Date: Sat Mar 8 16:25:10 2014 -0800
11841 Add flash loader for stm-demo board
11843 commit 4c7da6d0ad568448c37761cd0c0108b9161a9345
11844 Author: Keith Packard <keithp@keithp.com>
11845 Date: Fri Mar 7 21:27:26 2014 -0800
11847 doc: Add separate outline pdf generation
11849 This generates one-page pdf files that contain just the outline of
11852 Signed-off-by: Keith Packard <keithp@keithp.com>
11854 commit 8f2a85027b496451c5934eb36fcdffbd5e5da177
11855 Author: Keith Packard <keithp@keithp.com>
11856 Date: Fri Feb 28 23:04:54 2014 -0800
11858 Install .desktopfile as _SCRIPTS so they are left executable
11860 .desktop files should be marked executable so that the desktop
11861 environment knows they are correct.
11863 Signed-off-by: Keith Packard <keithp@keithp.com>
11865 commit a072cbb137126e677d3ebbf0245ec4ea5aa481ad
11866 Author: Keith Packard <keithp@keithp.com>
11867 Date: Fri Feb 28 21:16:57 2014 -0800
11869 altosui: Retry device enumeration after rebooting for self flash
11871 Windows takes 'a while' to include the rebooted device in the list of
11872 available devices, so try a few times with a 100ms delay so that we
11873 can avoid asking the user to select from an empty list.
11875 Signed-off-by: Keith Packard <keithp@keithp.com>
11877 commit ac2cfb03158b4902466a72edad5dc471ee6bdb91
11878 Author: Keith Packard <keithp@keithp.com>
11879 Date: Fri Feb 28 21:16:36 2014 -0800
11881 Mark development sequence to 1.3.3 by bumping version to 1.3.2.1
11883 Signed-off-by: Keith Packard <keithp@keithp.com>
11885 commit 57e5d13c0577e1b0a6e8117e2d04eeda6cf0b045
11886 Author: Keith Packard <keithp@keithp.com>
11887 Date: Sun Feb 23 17:42:08 2014 -0800
11889 libaltos: Link so with -znoexecstack flag
11891 This marks the library as not requiring an executable stack, which
11894 Signed-off-by: Keith Packard <keithp@keithp.com>
11896 commit 104b8bfc9b37fda175f2cb2a1e33601fbf6f48f6
11897 Merge: 403b95e 1edf7ef
11898 Author: Bdale Garbee <bdale@gag.com>
11899 Date: Thu Feb 20 13:23:52 2014 -0700
11901 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
11903 commit 403b95ee27782309b564855b85285c9f5f5c7068
11904 Author: Bdale Garbee <bdale@gag.com>
11905 Date: Thu Feb 20 13:23:32 2014 -0700
11907 update turnon scripts to store cal values
11909 commit 3ef0cc28758c68e6076afa809e157a84ce3661fb
11910 Author: Bdale Garbee <bdale@gag.com>
11911 Date: Thu Feb 20 13:23:20 2014 -0700
11913 typo fixes from Matt Kraai
11915 commit 1edf7ef8026ac4ab698a7f99671e9348d18ffd0a
11916 Author: Keith Packard <keithp@keithp.com>
11917 Date: Tue Feb 18 09:47:51 2014 -0800
11919 altos: Create balloon-specific load for TMv2 hardware
11921 Signed-off-by: Keith Packard <keithp@keithp.com>
11923 commit ff4ae350c24b3d6ef71e29191bb719b07ab9c5bb
11924 Author: Keith Packard <keithp@keithp.com>
11925 Date: Tue Feb 18 09:46:17 2014 -0800
11927 altos: Make balloon code run again
11929 This fixes the balloon code so that it works with recent altos bits
11931 Signed-off-by: Keith Packard <keithp@keithp.com>
11933 commit 8b6f051663dd17492bece9efb9e898ef113ab414
11934 Author: Keith Packard <keithp@keithp.com>
11935 Date: Tue Feb 18 09:45:41 2014 -0800
11937 altos: Set reasonable accel values when !HAS_ACCEL
11939 This lets us use telemetrum log and telemetry formats for balloons
11941 Signed-off-by: Keith Packard <keithp@keithp.com>
11943 commit 9f6983e3d61fa5231f3d0ce33dbc5aadf946b597
11944 Author: Keith Packard <keithp@keithp.com>
11945 Date: Tue Feb 18 09:44:52 2014 -0800
11947 altos: Expose ao_usb_running globally
11949 This lets other bits of the code know when USB has been connected.
11951 Signed-off-by: Keith Packard <keithp@keithp.com>
11953 commit 9b9d5b273a410e315739c5c6eaa4105523056b9a
11954 Author: Keith Packard <keithp@keithp.com>
11955 Date: Tue Feb 18 09:43:43 2014 -0800
11957 altos: Move balloon flight code to core
11959 This lets us create more than one balloon product
11961 Signed-off-by: Keith Packard <keithp@keithp.com>
11963 commit 43b1797189095c402e1c35bdc317c4196e180e66
11964 Author: Keith Packard <keithp@keithp.com>
11965 Date: Mon Feb 17 21:30:28 2014 -0800
11967 doc: Need to publish .svg files as well
11969 The drill templates are all .svg files that are referenced by the
11972 Signed-off-by: Keith Packard <keithp@keithp.com>
11974 commit 874d0065ecb066ee746a016876edebc7cc6e3d96
11975 Author: Keith Packard <keithp@keithp.com>
11976 Date: Mon Feb 17 21:27:57 2014 -0800
11978 Re-create drill templates
11980 Using inkscape, the drill templates weren't getting printed
11981 correctly. Switching to hand-generated svg fixes that.
11983 The .xsl file is also fixed to really encourage the images to be
11984 printed at exactly 100%.
11986 Signed-off-by: Keith Packard <keithp@keithp.com>
11988 commit 6e713f0a53d608a8855884b7a48e4e3423d8a3d2
11989 Author: Bdale Garbee <bdale@gag.com>
11990 Date: Mon Feb 17 00:15:58 2014 -0700
11992 deliver images used in MicroPeak manual to web server, too
11994 commit 1d421a43494cf2003ac23fb8cd21d6ae05edfac8
11995 Author: Bdale Garbee <bdale@gag.com>
11996 Date: Mon Feb 17 00:10:05 2014 -0700
11998 update copyright year assertion in MicroPeak manual, remember during releases
12000 commit a3ddb5906167e445f937b16fafb7f5c537852f0a
12001 Author: Keith Packard <keithp@keithp.com>
12002 Date: Sun Feb 16 18:01:10 2014 -0800
12004 Mark .desktop files as executable
12006 Signed-off-by: Keith Packard <keithp@keithp.com>
12008 commit c860d837a0c97a091c5f47fce91bdb8beb4602d3
12009 Author: Keith Packard <keithp@keithp.com>
12010 Date: Sun Feb 16 15:53:50 2014 -0800
12012 micropeak: Construct linux install script
12014 Uses the same script as altosui, just edits the final path name
12016 Signed-off-by: Keith Packard <keithp@keithp.com>
12018 commit 948a614a62754fd4fffd9b84ad83fd444e4f0437
12019 Author: Keith Packard <keithp@keithp.com>
12020 Date: Sun Feb 16 15:17:40 2014 -0800
12022 Move .desktop and icon management out of debian dir
12024 This constructs a .desktop file from a template and installs it, along
12025 with suitable .svg icons, during the normal build process
12027 Signed-off-by: Keith Packard <keithp@keithp.com>
12029 commit 066a01ad0b4e73fdb47b43a42c1d0b7fae81a180
12030 Author: Keith Packard <keithp@keithp.com>
12031 Date: Sun Feb 16 14:57:38 2014 -0800
12033 Put altusmetrum.svg and micropeak.svg in icon directory
12035 Signed-off-by: Keith Packard <keithp@keithp.com>
12037 commit 95f5a6ef52947088993d395874cf6aa502fd2503
12038 Merge: 135b6d4 de2a619
12039 Author: Bdale Garbee <bdale@gag.com>
12040 Date: Sun Feb 16 15:53:35 2014 -0700
12042 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
12044 commit 135b6d4019f584c050b3d70c11fb5bcf2c7396c4
12045 Author: Bdale Garbee <bdale@gag.com>
12046 Date: Sun Feb 16 15:53:22 2014 -0700
12048 use svg in the .desktop file
12050 commit 13dccd1869cdf00d4aa0df55a3ece33936cd520a
12051 Author: Bdale Garbee <bdale@gag.com>
12052 Date: Sun Feb 16 15:51:32 2014 -0700
12054 have the cal-freq script save cal values to a file
12056 commit de2a619900ee23911c866d5aaff63a0f9388bfc7
12057 Author: Keith Packard <keithp@keithp.com>
12058 Date: Sun Feb 16 13:01:29 2014 -0800
12060 Add linux installer script
12062 Create a linux installer shell script that unpacks the archive in a
12063 sensible place and adds a .desktop file to the environment
12065 Signed-off-by: Keith Packard <keithp@keithp.com>
12067 commit bf268354535a3a7b2e093235e5347ed2a6d809ff
12068 Author: Bdale Garbee <bdale@gag.com>
12069 Date: Thu Feb 13 21:53:13 2014 -0700
12071 updating changelog for release
12073 commit e53be56179f4cd93227b6bdc28c2ae60b81db57d
12074 Author: Keith Packard <keithp@keithp.com>
12075 Date: Sun Feb 9 23:47:47 2014 -0800
12077 doc: Update the 1.3.2 release notes to include APRS and Fire Igniter changes
12079 Signed-off-by: Keith Packard <keithp@keithp.com>
12081 commit d24ef4aa9429f4884548e5c9fd48d57e640f0d9d
12082 Author: Keith Packard <keithp@keithp.com>
12083 Date: Sun Feb 9 23:46:39 2014 -0800
12085 doc: Add remaining configurable parameters to the System Operation chapter
12087 Yes, this duplicates the section in the AltosUI chapter, but I'm not
12088 sure how to describe the device without talking about it in two
12089 places, so we might as well make both of them complete.
12091 Signed-off-by: Keith Packard <keithp@keithp.com>
12093 commit e76948d382cf6980c3a5b6c48405d71c8811780b
12094 Author: Keith Packard <keithp@keithp.com>
12095 Date: Sun Feb 9 22:54:31 2014 -0800
12097 altos: Put locked/unlocked GPS status in APRS comments
12099 Replace the 'S' (which marks the field showing sats in view) with
12100 either 'L' or 'U' to tell the user whether the GPS receiver is locked
12103 This also removes the colons in the comment field to shorten it. This
12104 makes it fit on one line of my FT1D display.
12106 Signed-off-by: Keith Packard <keithp@keithp.com>
12108 commit 5001a0f882af53dde33fc531215944c9d727baf4
12109 Author: Keith Packard <keithp@keithp.com>
12110 Date: Sun Feb 9 22:53:05 2014 -0800
12112 altos: Re-send previous GPS position in APRS if lock is lost
12114 APRS radios often show only the last received APRS packet, which means
12115 that erasing the last known GPS position when we lose lock by sending
12116 0/0/0 is unhelpful. Instead, just send the last known position, and
12117 make sure that we send 0/0/0 before we're locked the first time.
12119 Signed-off-by: Keith Packard <keithp@keithp.com>
12121 commit 864d1e2282ac1d241478cf663ee24112c9d3dc37
12122 Author: Keith Packard <keithp@keithp.com>
12123 Date: Sat Feb 8 22:02:02 2014 -0800
12125 altos: Fixup named ADC printing
12127 Print all ADC values on one line when using named ADC values
12129 Signed-off-by: Keith Packard <keithp@keithp.com>
12131 commit f750ef6f9745b15af45bb80f5b46b9e6f51796d8
12132 Author: Keith Packard <keithp@keithp.com>
12133 Date: Sat Feb 8 20:05:02 2014 -0800
12135 altos: Add needed math sources to TeleGPS v0.1 build
12137 APRS requires the logf function to report altitude.
12139 Signed-off-by: Keith Packard <keithp@keithp.com>
12141 commit 6367ab2dec718c512073f70dfab86dbd1656b1fe
12142 Author: Keith Packard <keithp@keithp.com>
12143 Date: Sat Feb 8 20:02:54 2014 -0800
12145 altos: Report nsat in view in APRS packet
12147 This adds the number of sats in view (as opposed to the number of sats
12148 in solution) to the APRS packet.
12150 Signed-off-by: Keith Packard <keithp@keithp.com>
12152 commit 8ddbbdcdc498a19ebf4a440bbf5d73b6538e0a57
12153 Author: Keith Packard <keithp@keithp.com>
12154 Date: Sat Feb 8 20:00:56 2014 -0800
12156 altos: Don't write more than 12 sat infos in ublox driver
12158 This was overwriting memory past the end of the ao_gps_tracking_data
12159 array, which isn't a good idea.
12161 Signed-off-by: Keith Packard <keithp@keithp.com>
12163 commit 324073d14ed8215b74d9df51f2229827cd4401d0
12164 Author: Keith Packard <keithp@keithp.com>
12165 Date: Sat Feb 1 00:32:43 2014 -0800
12167 altos/stm: Block interrupts while reprogramming flash
12169 Wouldn't work well to get interrupted...
12171 Signed-off-by: Keith Packard <keithp@keithp.com>
12173 commit d6d56c20465455b759f60a03fc96aa228ab9102e
12174 Author: Keith Packard <keithp@keithp.com>
12175 Date: Sat Feb 1 00:06:30 2014 -0800
12177 altos: Enable system timer in flash loader and prod watchdog with it
12179 This makes it possible to reflash the board without needing to disable
12182 Signed-off-by: Keith Packard <keithp@keithp.com>
12184 commit 1d3420e51db4d1a46237e97aeb189d2a8eba7f5e
12185 Author: Keith Packard <keithp@keithp.com>
12186 Date: Fri Jan 31 17:44:45 2014 -0800
12188 altos: Eliminate warnings in FAT code
12190 The FAT file system code wasn't cleaned up when the warning fixes were
12193 Signed-off-by: Keith Packard <keithp@keithp.com>
12195 commit 7a8adfed8fbbcaac71da9c6d54bbd3091f4d7511
12196 Author: Keith Packard <keithp@keithp.com>
12197 Date: Thu Mar 21 10:16:35 2013 -0700
12199 altos: Add watchdog timer task
12201 This new task frobs a pin periodically to inform the hardware that the
12202 operating system is running.
12204 Signed-off-by: Keith Packard <keithp@keithp.com>
12206 commit 63683f91f5fe9588c1d905a572509cb674aaad68
12207 Author: Keith Packard <keithp@keithp.com>
12208 Date: Wed Jan 23 21:36:18 2013 -0800
12210 altos: Add names when reporting STM ADC values
12212 Signed-off-by: Keith Packard <keithp@keithp.com>
12214 commit 7fdf6a6cc252c7813a857714f6088b7fd5bfab40
12215 Author: Keith Packard <keithp@keithp.com>
12216 Date: Sat Feb 8 14:31:06 2014 -0800
12218 doc: Add title page image to altusmetrum.pdf
12220 Signed-off-by: Keith Packard <keithp@keithp.com>
12222 commit 2c70a7a49cc0e92df90ea17a870d661ca857c145
12223 Author: Keith Packard <keithp@keithp.com>
12224 Date: Sat Feb 8 14:30:52 2014 -0800
12226 doc: Ignore generate template XSL file
12228 Signed-off-by: Keith Packard <keithp@keithp.com>
12230 commit 2320b788c47757032b2874e64479ef382456c2d3
12231 Author: Keith Packard <keithp@keithp.com>
12232 Date: Sat Feb 8 14:24:48 2014 -0800
12234 doc: Document GPS max height addition
12236 Signed-off-by: Keith Packard <keithp@keithp.com>
12238 commit 8363326cd87fb1e53ad78146c0503aa476d2da89
12239 Author: Keith Packard <keithp@keithp.com>
12240 Date: Sat Feb 8 14:24:13 2014 -0800
12242 doc: Update micropeak docs to include lots of pictures
12244 Signed-off-by: Keith Packard <keithp@keithp.com>
12246 commit 306028b33ebed45bcf379740cc3c01c2360c51f4
12247 Author: Keith Packard <keithp@keithp.com>
12248 Date: Sat Feb 8 10:25:33 2014 -0800
12250 doc: Micropeak doc updates for 1.3.2
12252 New 'download' button.
12253 Update download instructions for new USB adapter.
12255 Signed-off-by: Keith Packard <keithp@keithp.com>
12257 commit 28d5239bff234cc1158a270a29c0e39067f613c3
12258 Author: Keith Packard <keithp@keithp.com>
12259 Date: Fri Feb 7 22:45:26 2014 -0800
12261 micropeak: Missing a couple of new exceptions when loading files
12263 The change to keep reading on invalid chars from the serial port
12264 exposed a couple of new exceptions from the MicroData code which the
12265 file loading code needs to cope with.
12267 Signed-off-by: Keith Packard <keithp@keithp.com>
12269 commit 8d0d59c51138dc1b1bbf6933354fe9faf4d67986
12270 Author: Keith Packard <keithp@keithp.com>
12271 Date: Fri Feb 7 22:32:17 2014 -0800
12273 micropeak: Keep reading until we get valid data
12275 Don't stop just because we saw something invalid on the serial line;
12276 let the user try again, or cancel when they get bored.
12278 However, if the serial line disappears or some other fatal error
12279 occurs, then do stop and put up an error dialog.
12281 Signed-off-by: Keith Packard <keithp@keithp.com>
12283 commit 4a5b3837b460d1b6fcea99312728114c4734495a
12284 Author: Keith Packard <keithp@keithp.com>
12285 Date: Thu Feb 6 17:08:34 2014 -0800
12287 altos: report 0/0/0 for APRS position when GPS is not locked
12289 We were reporting whatever the GPS device sent, even if it wasn't
12290 reporting a valid status. That's not terribly useful.
12292 Signed-off-by: Keith Packard <keithp@keithp.com>
12294 commit 9e0bda088c097ac6bcc677d7b6d00683e73a68fb
12295 Author: Keith Packard <keithp@keithp.com>
12296 Date: Mon Feb 3 00:24:38 2014 -0800
12298 micropeak: Watch serial data during download
12300 This adds a text area to monitor the incoming serial data in case some
12303 Signed-off-by: Keith Packard <keithp@keithp.com>
12305 commit 0c2f28cbc1cb312d3bcc8951176d79f234a1af04
12306 Author: Keith Packard <keithp@keithp.com>
12307 Date: Mon Feb 3 00:26:42 2014 -0800
12309 altoslib: Use existing unicode Charset in AltosLink
12311 Instead of making AltosLink look up the unicode charset, just provide
12314 Signed-off-by: Keith Packard <keithp@keithp.com>
12316 commit 7df221c42948cb42cf777b899263c8ec9067bd55
12317 Author: Keith Packard <keithp@keithp.com>
12318 Date: Fri Jan 31 18:09:26 2014 -0800
12320 doc: Mention that an APRS interval of 0 disables it entirely
12322 And mention that the value is a time in seconds between APRS packets.
12324 Signed-off-by: Keith Packard <keithp@keithp.com>
12326 commit 230af613d372afe540c6a8860199d717eedecf57
12327 Author: Keith Packard <keithp@keithp.com>
12328 Date: Thu Jan 30 20:54:24 2014 -0800
12330 doc: Replace screen captures with 'active' window ones
12332 These are the same as the previous captures, just with the titlebar
12333 highlighted instead of grey so that they're all consistent. These were
12334 also done with the gimp which makes the areas outside of the window
12335 (like outside the rounded corners) have zero alpha so that the white
12336 background shows through.
12338 Signed-off-by: Keith Packard <keithp@keithp.com>
12340 commit 7e3088ece81ef85f3dbd4df51954bc90681d6b6e
12341 Author: Keith Packard <keithp@keithp.com>
12342 Date: Thu Jan 30 18:42:08 2014 -0800
12344 doc: Update screen capture of pyro config with correct names
12346 With the UI now using letters as TeleMega does, update the screen shot
12347 used in the manual to match
12349 Signed-off-by: Keith Packard <keithp@keithp.com>
12351 commit eb9262901aff4f69fa3d2357693634cbee9bca46
12352 Author: Keith Packard <keithp@keithp.com>
12353 Date: Thu Jan 30 18:38:01 2014 -0800
12355 altosui: Use letter names for pyro channels in pyro config UI
12357 TeleMega has the extra pyro channels labeled A, B, C, D instead of 0,
12358 1, 2, 3. Use those names in the UI to avoid confusion.
12360 Signed-off-by: Keith Packard <keithp@keithp.com>
12362 commit 4e94d785d9a1cce4eb5b3063d55e825719afb58e
12363 Author: Keith Packard <keithp@keithp.com>
12364 Date: Tue Jan 28 21:52:57 2014 -0800
12366 doc: Add explicit paragraph about using one battery with Tmega
12368 Just in case the factory-supplied jumper gets lost.
12370 Signed-off-by: Keith Packard <keithp@keithp.com>
12372 commit f4f31590518875eda40473dd2178d6976a4f86a3
12373 Author: Bdale Garbee <bdale@gag.com>
12374 Date: Tue Jan 28 18:21:10 2014 -0700
12376 use firmware in /usr/share/altos for teledongle, update telemetrum for v2.0
12378 commit 6b70b8b6bb4e8eae8159ec966847092d0b1deab3
12379 Author: Keith Packard <keithp@keithp.com>
12380 Date: Fri Jan 24 22:43:25 2014 -0800
12382 altoslib: Don't lose gps_height value between GPS samples
12384 gps_height is now reliably updated whenever GPS altitude data is
12385 received, so don't try to reset it between samples.
12387 Signed-off-by: Keith Packard <keithp@keithp.com>
12389 commit ea8c9ca9dd24a026ea5bfe5a1ac70857181a88c8
12390 Author: Keith Packard <keithp@keithp.com>
12391 Date: Fri Jan 24 22:40:49 2014 -0800
12393 altosui: Show GPS max height in flight stats window of graph
12395 Uses the new state.max_gps_height() function.#
12397 Signed-off-by: Keith Packard <keithp@keithp.com>
12399 commit e4616233f3942d2796ba6633477670a83669957b
12400 Author: Keith Packard <keithp@keithp.com>
12401 Date: Fri Jan 24 22:39:10 2014 -0800
12403 altoslib: Track GPS altitude values to be able to report max gps height
12405 This adds separate GPS altitude and GPS ground altitude values so that
12406 the AltosState object can report GPS max height.
12408 Signed-off-by: Keith Packard <keithp@keithp.com>
12410 commit aa2edc97ac0c880e569baca453ff6302ad6da65f
12411 Author: Keith Packard <keithp@keithp.com>
12412 Date: Fri Jan 24 21:34:39 2014 -0800
12414 doc: Fix spelling of decelerate
12416 commit eb3ffd06575ddd0be061aa2717c7075c823ed54e
12417 Author: Keith Packard <keithp@keithp.com>
12418 Date: Fri Jan 24 21:31:17 2014 -0800
12420 doc: Document flight computer wiring connections
12422 This details all of the wiring connections for each flight computer
12423 and explains how to wire batteries, switches and how to use external
12424 pyro batteries and active switches with each one.
12426 Signed-off-by: Keith Packard <keithp@keithp.com>
12428 commit ee480d180cbdd712ab13d39716c38aabd4678d95
12429 Author: Keith Packard <keithp@keithp.com>
12430 Date: Fri Jan 24 10:10:00 2014 -0800
12432 Set version to 1.3.2 in preparation for release
12434 Signed-off-by: Keith Packard <keithp@keithp.com>
12436 commit 9c4674d90f9b111e1b47abb7aee714ed12fa3aa5
12437 Author: Keith Packard <keithp@keithp.com>
12438 Date: Fri Jan 24 09:35:55 2014 -0800
12440 doc: Add 1.3.2 release notes
12442 Signed-off-by: Keith Packard <keithp@keithp.com>
12444 commit 94be1e3eb9f94a59522743374d02a1f229266931
12445 Author: Keith Packard <keithp@keithp.com>
12446 Date: Fri Jan 24 09:21:46 2014 -0800
12448 altos: Tmega Don't try to log info about more than 12 GPS sats
12450 The mega log format has a single packet for GPS info which holds a
12451 maximum of 12 satellites. Bdale managed to get 14 sats in view, which
12452 ended up crashing the ground station software, and also overflowed the
12453 gps_tracking_data structure.
12455 Signed-off-by: Keith Packard <keithp@keithp.com>
12457 commit dd28429405498fca0788ce9c19093898c84b10e5
12458 Author: Keith Packard <keithp@keithp.com>
12459 Date: Thu Jan 23 22:16:36 2014 -0800
12461 altoslib: Validate TeleMega GPS_SAT log packet nsat
12463 Make sure nsat is not more than the size of the array
12465 Signed-off-by: Keith Packard <keithp@keithp.com>
12467 commit afbae4c6b7a658f690cb827acfef015e9e2da318
12468 Author: Bdale Garbee <bdale@gag.com>
12469 Date: Wed Jan 22 21:31:03 2014 -0700
12471 update notes on how to release
12473 commit 0ef0c50536e5eb6ad3455b5828983307edbab828
12474 Author: Bdale Garbee <bdale@gag.com>
12475 Date: Wed Jan 22 20:53:03 2014 -0700
12477 freshen ChangeLog for release
12479 commit 200137060651f48c99276c8feb0e15980a9b46be
12480 Author: Bdale Garbee <bdale@gag.com>
12481 Date: Wed Jan 22 20:52:09 2014 -0700
12483 update copyright date on main documentation file
12485 commit 63171339c03cf9bf3d691511889223bf43024124
12486 Author: Keith Packard <keithp@keithp.com>
12487 Date: Tue Jan 21 23:02:27 2014 -0800
12489 doc: Update for 1.3.1
12491 Add 1.3.1 release notes. Update screen shots. Document new functionality
12493 Signed-off-by: Keith Packard <keithp@keithp.com>
12495 commit e6a73d6cbe149a930f8c4e2dac655bc3f6270013
12496 Author: Keith Packard <keithp@keithp.com>
12497 Date: Tue Jan 21 23:01:28 2014 -0800
12499 doc: Fix image widths to make them all scale the same amount
12501 Hand-compute scale factors so that all images are presented at the
12502 same relative size as they would be on the screen.
12504 Signed-off-by: Keith Packard <keithp@keithp.com>
12506 commit e61c02b51e069aa58b36f59b9ca8e7c8284bc93a
12507 Author: Keith Packard <keithp@keithp.com>
12508 Date: Tue Jan 21 22:13:01 2014 -0800
12510 altosui: Handle serial-port startup errors in idle-monitor
12512 Trap exceptions during idle monitor startup and report them.
12514 Signed-off-by: Keith Packard <keithp@keithp.com>
12516 commit 42922b40fc695bdaa92e3fb0b41a248f7df918d0
12517 Author: Keith Packard <keithp@keithp.com>
12518 Date: Tue Jan 21 22:01:39 2014 -0800
12520 altosui: Handle already-opened link in IgniteUI
12522 Must run the link open from the UI thread so that we can put up the
12523 in-use dialog immdiately; otherwise the UI thread is blocked which
12524 means the dialog never appears and the app appears to hang.
12526 Signed-off-by: Keith Packard <keithp@keithp.com>
12528 commit f118e33416e45ea9a2b5ede4157bd8b58ddb6ebb
12529 Author: Keith Packard <keithp@keithp.com>
12530 Date: Tue Jan 21 21:37:18 2014 -0800
12532 altosuilib: Remove some spurious debug printfs
12534 Signed-off-by: Keith Packard <keithp@keithp.com>
12536 commit 677fcafd3816b6d8d86b2dc41b840d97b5ccbf07
12537 Author: Keith Packard <keithp@keithp.com>
12538 Date: Tue Jan 21 21:34:58 2014 -0800
12540 altoslib: Fetch target device config for Fire Igniter npyro value
12542 The code was using the AltosLink config_data, which is always the
12543 locally connected device's configuration. When using the packet link,
12544 that's not terribly useful when asking how many extra pyro channels
12547 Signed-off-by: Keith Packard <keithp@keithp.com>
12549 commit 13cf4000bd53ac4af66231d56e24c9eb11178a5f
12550 Merge: 7a8551f 99fedbf
12551 Author: Keith Packard <keithp@keithp.com>
12552 Date: Tue Jan 21 20:59:06 2014 -0800
12554 Merge remote-tracking branch 'origin/master'
12556 commit 99fedbf0ed42a5d4fa80f094576ca0260040ef5e
12557 Author: Bdale Garbee <bdale@gag.com>
12558 Date: Tue Jan 21 21:31:25 2014 -0700
12560 set version to 1.3.1 for release
12562 commit 7a8551fe8e5f0a90cbc494842715a96f08c11900
12563 Author: Anthony Towns <aj@erisian.com.au>
12564 Date: Mon Jan 20 19:38:21 2014 +1000
12566 altosui: rate limit map downloads
12568 commit 0faa098f05d43eefc1fa54462401171fca5034cb
12569 Author: Anthony Towns <aj@erisian.com.au>
12570 Date: Mon Jan 20 05:10:58 2014 +1000
12572 altosui: --fetchmaps gets same number of maps as GUI
12574 commit aab5873c87d6ecfe0854751746f80d4bc7ebeffa
12575 Author: Anthony Towns <aj@erisian.com.au>
12576 Date: Mon Jan 20 04:52:43 2014 +1000
12578 AltosSiteMapPreload: only load 49 maps
12580 Google Static Maps API limits queries to 50 maps per IP per minute,
12581 so querying a 7x7 array instead of a 9x9 array seems more likely to
12584 commit 7f9cda0e2531a7bba7f1b4e3b7212a62b5bec1ed
12585 Author: Keith Packard <keithp@keithp.com>
12586 Date: Sun Jan 19 00:17:06 2014 -0800
12588 altosui: Make romconfig serial and radio cal fields 8 digits wide
12590 This ensure that they are wide enough to show a cc1120 calibration
12591 value, which is 7 digits.
12593 Signed-off-by: Keith Packard <keithp@keithp.com>
12595 commit 2b891115c95453d9002d8ef307a27e14eda145a5
12596 Author: Bdale Garbee <bdale@gag.com>
12597 Date: Fri Jan 17 20:55:45 2014 -0700
12599 set version to 1.3.0.2 for test flights this weekend
12601 commit c33ec8207c0e5d4c855e87b2746371b19d437f7d
12602 Author: Bdale Garbee <bdale@gag.com>
12603 Date: Fri Jan 17 20:47:16 2014 -0700
12605 use firmware in /usr/share/altos for production flashing
12607 commit cfcb127b248b62231049b6b50cf9b7edc2731f0a
12608 Author: Keith Packard <keithp@keithp.com>
12609 Date: Wed Jan 15 13:28:16 2014 -0800
12611 altos: Add missing ADC divider values for Tmega v1.0
12613 Somehow I left these out of the previous commit
12615 Signed-off-by: Keith Packard <keithp@keithp.com>
12617 commit 9001d5780a41986017bd3bbc7f8c5556b116c351
12618 Author: Keith Packard <keithp@keithp.com>
12619 Date: Wed Jan 15 12:42:59 2014 -0800
12621 Ignore 32 and 64 bit cjnitest apps
12623 commit c743eaa060080a7bd236466b93cff3abc96f405b
12624 Author: Keith Packard <keithp@keithp.com>
12625 Date: Wed Jan 15 12:40:26 2014 -0800
12627 altos: Report battery, apogee and main voltages over APRS
12629 This makes APRS more usable when you mute the RF audio on the HT.
12631 Signed-off-by: Keith Packard <keithp@keithp.com>
12633 commit cc06242e882cba462791962c199b7c89e79adc65
12634 Author: Keith Packard <keithp@keithp.com>
12635 Date: Tue Jan 14 23:29:59 2014 -0800
12637 altos: Use factory calibration for all acceleration computations
12639 The ground acceleration value will vary depending on the tilt angle of
12640 the airframe, which will result in incorrect acceleration computations
12641 during flight. This also avoids accidental boost detect when moving
12642 the airframe around in pad mode.
12644 Signed-off-by: Keith Packard <keithp@keithp.com>
12646 commit 9d812b3db418fd9816731b761a0853eb38f5a265
12647 Author: Keith Packard <keithp@keithp.com>
12648 Date: Tue Jan 14 23:21:40 2014 -0800
12650 altos: Switch APRS to compressed position format
12652 This provides lat/lon/alt in fewer bytes while improving precision.
12654 Signed-off-by: Keith Packard <keithp@keithp.com>
12656 commit f560d5063b1339dbfb3e6723cfadb7b4c5eace25
12657 Author: Keith Packard <keithp@keithp.com>
12658 Date: Tue Jan 14 23:18:40 2014 -0800
12660 doc: Ship telemini outline as pdf file too
12662 Build telemini.pdf from telemini.svg and include it in all of the
12665 Signed-off-by: Keith Packard <keithp@keithp.com>
12667 commit 06ffd8022ff5ac74274c9839d42c0c47274cb8b9
12668 Author: Keith Packard <keithp@keithp.com>
12669 Date: Wed Jan 1 22:08:13 2014 -0800
12671 altosui: Require both libaltos32 and libaltos64 for fat Linux tarball
12673 No sense shipping a broken tarball ever
12675 Signed-off-by: Keith Packard <keithp@keithp.com>
12677 commit 8bff2822c242d2878b408b9c0d8a7647108ea4b1
12678 Author: Keith Packard <keithp@keithp.com>
12679 Date: Wed Jan 1 22:02:56 2014 -0800
12681 libaltos: Build -m64 and -m32 for fat tarball when possible
12683 Check to see if we can compile libaltos for both 32 bit and 64 bit
12684 systems, and then use those when generating the linux tarball.
12686 Signed-off-by: Keith Packard <keithp@keithp.com>
12688 commit 95d77eaff708397d8b1e29904dc47d8ea09e8754
12689 Author: Keith Packard <keithp@keithp.com>
12690 Date: Wed Jan 1 22:02:04 2014 -0800
12692 Bump version to 1.3.9.1
12694 Lots of new features; let's not release with 1.3 set
12696 Signed-off-by: Keith Packard <keithp@keithp.com>
12698 commit b15bd24bbe48e338497c6257f5fe2c7fd1cbffbb
12699 Author: Keith Packard <keithp@keithp.com>
12700 Date: Wed Jan 1 22:00:24 2014 -0800
12702 altosui: Handle a missing libaltos when starting up
12704 Skip a null list of devices when figuring out what to open monitor
12705 windows for during startup.
12707 Signed-off-by: Keith Packard <keithp@keithp.com>
12709 commit c35ea586b9e792c45b287924fd256928308d9a36
12710 Author: Keith Packard <keithp@keithp.com>
12711 Date: Wed Jan 1 21:12:20 2014 -0800
12713 altos: Flip acceleration data consistently for orientation changes
12715 Must flip the acceleration calibration data using the same function as
12716 flipping the actual acceleration data or the calibration will no
12717 longer be valid after changing orientation. For the MMA655x, this
12718 means using 4095 in both places, rather than using 0x7fff for the
12719 calibration data changes and 4095 for the data value changes. For the
12720 MPU6000, this means using 0 in both places.
12722 Signed-off-by: Keith Packard <keithp@keithp.com>
12724 commit afc16e805145c3e9ab4ba948f9ab1d9aa2b27afb
12725 Author: Keith Packard <keithp@keithp.com>
12726 Date: Sat Dec 28 10:18:53 2013 -0800
12728 altos: Add 'O' command for TeleMega orient testing
12730 Only present when HAS_FLIGHT_DEBUG is enabled, this command lets the
12731 user check the orientation tracking code by showing the current
12732 orientation and when the calibration values are reset.
12734 Signed-off-by: Keith Packard <keithp@keithp.com>
12736 commit 9877f6b880a0e89fbfbf1a39ded94bdc1891f3d9
12737 Author: Keith Packard <keithp@keithp.com>
12738 Date: Sat Dec 28 10:17:37 2013 -0800
12740 altosui: Switch Graph to AltosOrient type
12742 The graph was using a private class for orient type, use the altoslib one
12744 Signed-off-by: Keith Packard <keithp@keithp.com>
12746 commit aa01f06acfbf029958a55f68175b6868817b333f
12747 Author: Keith Packard <keithp@keithp.com>
12748 Date: Sat Dec 28 10:16:24 2013 -0800
12750 altosui: Adjust info table column width
12752 Make sure the info table can show a full longitude value
12754 Signed-off-by: Keith Packard <keithp@keithp.com>
12756 commit bbc4940730e6b431f1b9ccd9bbaf9faa0ffb2b1f
12757 Author: Keith Packard <keithp@keithp.com>
12758 Date: Sat Dec 28 10:15:26 2013 -0800
12760 altosui: Add orient to ascent and info table views
12762 This adds 'tilt angle' to both ascent and info table views
12764 Signed-off-by: Keith Packard <keithp@keithp.com>
12766 commit 053d092b3dca4ebb98e97ec0fe24f5f5e1c31f88
12767 Author: Keith Packard <keithp@keithp.com>
12768 Date: Sat Dec 28 10:13:05 2013 -0800
12770 altoslib: Add AltosOrient class and max_orient()
12772 This adds the class necessary to put orient into a UI.
12774 Signed-off-by: Keith Packard <keithp@keithp.com>
12776 commit 081455dcba860f3e4df8cd66f3fe686b204034ad
12777 Author: Keith Packard <keithp@keithp.com>
12778 Date: Sat Dec 21 08:56:00 2013 -0800
12780 altosui: Extend Fire Igniter to additional channels
12782 This lets the UI test fire other pyro channels on TeleMega
12784 Signed-off-by: Keith Packard <keithp@keithp.com>
12786 commit 9cf9a67f937185c0c0bb5b2bae4f420755965799
12787 Author: Keith Packard <keithp@keithp.com>
12788 Date: Sat Dec 21 06:46:46 2013 -0800
12790 altosui: Switch from radio buttons to check boxes in pyro config. Add close
12792 First of (we hope) many review comments from Troj.
12794 Signed-off-by: Keith Packard <keithp@keithp.com>
12796 commit 9289200ccb661b10ff892760ecbc752c7745de6b
12797 Author: Keith Packard <keithp@keithp.com>
12798 Date: Fri Dec 20 23:04:43 2013 -0800
12800 altos: Turn on -Werror for STM and LPC builds
12802 Now that the build completes with no warnings, make future warnings
12805 Signed-off-by: Keith Packard <keithp@keithp.com>
12807 commit 16b37b49985daf21ebb93b3d6ae64af67533be22
12808 Author: Keith Packard <keithp@keithp.com>
12809 Date: Fri Dec 20 23:02:51 2013 -0800
12811 altos: Turn on warnings for LPC products too
12813 Signed-off-by: Keith Packard <keithp@keithp.com>
12815 commit f578d9455eec9ea0eccd2d5e21349e274ea4281a
12816 Author: Keith Packard <keithp@keithp.com>
12817 Date: Fri Dec 20 23:02:21 2013 -0800
12819 altos/lpc: Missing */ in definition of PIO0_4
12821 Would maek using these values pretty hard.
12823 Signed-off-by: Keith Packard <keithp@keithp.com>
12825 commit 14790172e02d4e1624c35797f87ffd94345d54ff
12826 Author: Keith Packard <keithp@keithp.com>
12827 Date: Fri Dec 20 23:00:43 2013 -0800
12829 altos: lpc exti setup was incorrectly testing mode
12831 Check for NOCONFIGURE bit was missing parens
12833 Signed-off-by: Keith Packard <keithp@keithp.com>
12835 commit 48f996a9d65631238b4de446530f31f83acb99f5
12836 Author: Keith Packard <keithp@keithp.com>
12837 Date: Fri Dec 20 22:59:42 2013 -0800
12839 altos: cc115l driver tone_run wasn't recording number of tones
12841 This would prevent the cc115l driver from ever sending tones.
12843 Signed-off-by: Keith Packard <keithp@keithp.com>
12845 commit e11fcc299f4a1a0461a3442ca13f8984d76c30ff
12846 Author: Keith Packard <keithp@keithp.com>
12847 Date: Fri Dec 20 22:58:10 2013 -0800
12849 altos: Clean up warnings for LPC products
12851 Unused varibles, functions and parameters.
12853 Signed-off-by: Keith Packard <keithp@keithp.com>
12855 commit 4ed108fb86676daea17264d7159c2cff9ea7a6e4
12856 Author: Keith Packard <keithp@keithp.com>
12857 Date: Fri Dec 20 22:45:56 2013 -0800
12859 altos/stm: Turn on -Wextra
12861 All of the warnings for STM projects are cleaned up now
12863 Signed-off-by: Keith Packard <keithp@keithp.com>
12865 commit 1406a5b0721a135913a9801e9eea9e91f0a536b4
12866 Author: Keith Packard <keithp@keithp.com>
12867 Date: Fri Dec 20 22:45:01 2013 -0800
12869 altos: Add default button return value from ao_button_get
12871 This "can't" happen, but it's not unreasonable to have a default
12874 Signed-off-by: Keith Packard <keithp@keithp.com>
12876 commit 316d898715746a379068ac8511692bdb9da14b39
12877 Author: Keith Packard <keithp@keithp.com>
12878 Date: Fri Dec 20 22:44:20 2013 -0800
12880 altos: unsigned value in ao_pyro_set checked for negative value
12882 No sense checking unsigned values for less than zero.
12884 Signed-off-by: Keith Packard <keithp@keithp.com>
12886 commit 5c9172ba5681ff93d63c9c263a453d0025170045
12887 Author: Keith Packard <keithp@keithp.com>
12888 Date: Fri Dec 20 22:43:18 2013 -0800
12890 altos: Clean up -Wextra warnings
12892 Unused variables, mismatching signed/unsigned and a few other misc
12895 Signed-off-by: Keith Packard <keithp@keithp.com>
12897 commit db8f3426ac1cf756a2e4974ca61a5ae9048c80ce
12898 Author: Keith Packard <keithp@keithp.com>
12899 Date: Fri Dec 20 22:21:23 2013 -0800
12901 altos: Turn on -Wall for stm compiles
12903 The warnings are all cleaned up now, leave this on by default
12905 Signed-off-by: Keith Packard <keithp@keithp.com>
12907 commit b31b4622d5bd92c0cc0851818f5b595dbdb60ead
12908 Author: Keith Packard <keithp@keithp.com>
12909 Date: Fri Dec 20 22:15:25 2013 -0800
12911 altos: Clean up some minor warnings from -Wall
12913 Unused variables, functions and labels, missing enums in switch.
12915 Signed-off-by: Keith Packard <keithp@keithp.com>
12917 commit 755082d36231c1b247bc0e1f13919dd9b5c362a8
12918 Author: Keith Packard <keithp@keithp.com>
12919 Date: Fri Dec 20 22:13:32 2013 -0800
12921 altos: mma655x also needs ao_sensor_errors
12923 TeleMetrum has an MMA655X but no IMU, so it needs an explicit addition
12926 Signed-off-by: Keith Packard <keithp@keithp.com>
12928 commit 758acb92cccbe4b64a35a1883b42713738c90630
12929 Author: Keith Packard <keithp@keithp.com>
12930 Date: Fri Dec 20 22:08:11 2013 -0800
12932 altos: Complain about sensor self-test errors only in idle mode
12934 When the accelerometer says to go into pad mode, don't look for other
12935 sensor self test errors. Only look for sensor self test errors to
12936 choose between idle and invalid mode. This will prevent minor sensor
12937 self test errors from letting the rocket fly safely.
12939 Signed-off-by: Keith Packard <keithp@keithp.com>
12941 commit c8b27410e45cc3d80ad4b896bffe70e9aec5e3aa
12942 Author: Keith Packard <keithp@keithp.com>
12943 Date: Fri Dec 20 22:06:52 2013 -0800
12945 altos: 3-axis accel calibration was invalid in explicit accel cal mode
12947 When explicit Z-axis accel calibration values were provided to the 'c
12948 a' command, the 3-axis accelerometer calibration values would get set
12949 to uninitialized values. Not so helpful.
12951 Signed-off-by: Keith Packard <keithp@keithp.com>
12953 commit 2a912dcde191e2f750845c464611641a5abdc28a
12954 Author: Keith Packard <keithp@keithp.com>
12955 Date: Fri Dec 20 22:04:53 2013 -0800
12957 altos: Execute self-test on MMA655X part
12959 This doesn't check for fine calibration, just makes sure the part is
12960 within the broad tolerances specified by the manufacturer. The subtle fix
12961 here was actually getting reset working -- there was a typo in the
12962 bitpattern definition which caused the reset to fail, making it hard
12963 to self-test the part, as self-test is only valid before the part is running.
12965 Signed-off-by: Keith Packard <keithp@keithp.com>
12967 commit b89fb51a963635e2effe3a31f803bfc29c2c46b7
12968 Author: Keith Packard <keithp@keithp.com>
12969 Date: Fri Dec 20 19:44:38 2013 -0800
12971 altoslib: Bump library version
12973 Prepare for next release by making sure we notice that the API/ABI for
12974 this library has changed.
12976 Signed-off-by: Keith Packard <keithp@keithp.com>
12978 commit 8e5f3b922100f9de54b9650df14749e81b1a6562
12979 Author: Keith Packard <keithp@keithp.com>
12980 Date: Fri Dec 20 19:40:31 2013 -0800
12982 altosui: Add imu and mag sensor values to plots
12984 Makes for a lot of potential graph elements.
12986 Signed-off-by: Keith Packard <keithp@keithp.com>
12988 commit f65880cf5bfcba5005c32db2b300448e585f3e45
12989 Author: Keith Packard <keithp@keithp.com>
12990 Date: Fri Dec 20 19:39:40 2013 -0800
12992 altosuilib: Rearrange graph enable buttons
12994 Eliminate separate 'enable' radio button, provide for multiple columns
12996 Signed-off-by: Keith Packard <keithp@keithp.com>
12998 commit 796cb90e3241103f79ae12565cf6f0dad21cb57c
12999 Author: Keith Packard <keithp@keithp.com>
13000 Date: Fri Dec 20 19:38:29 2013 -0800
13002 altoslib: Fetch 'orient' value from Mega Sensor packet
13004 The mega sensor packet had a spare byte to hold the current
13007 Signed-off-by: Keith Packard <keithp@keithp.com>
13009 commit 91bcfae2e64ecb2e7de1292b264910382b635aea
13010 Author: Keith Packard <keithp@keithp.com>
13011 Date: Fri Dec 20 19:37:08 2013 -0800
13013 altoslib: Convert IMU and Mag sensor values to useful units
13015 Convert from raw sensor values to metric units
13017 Signed-off-by: Keith Packard <keithp@keithp.com>
13019 commit 2ad31bad20b20615e9d8b29088e2488fddc81ac9
13020 Author: Mike Beattie <mike@ethernal.org>
13021 Date: Fri Dec 20 15:06:37 2013 +1300
13023 altosdroid: improve build system dependencies
13025 Signed-off-by: Mike Beattie <mike@ethernal.org>
13027 commit 0e3b3ce66035e8a90fd708d9a4bc01370174c9eb
13028 Author: Mike Beattie <mike@ethernal.org>
13029 Date: Fri Dec 20 15:06:07 2013 +1300
13031 altosdroid: update to latest google play services
13033 Signed-off-by: Mike Beattie <mike@ethernal.org>
13035 commit 96f2ae5fc0d3bf88704d2ae1b4df5dc6aefc523b
13036 Author: Mike Beattie <mike@ethernal.org>
13037 Date: Fri Dec 20 15:05:42 2013 +1300
13039 altosdroid: force older jarsigner signing algorithm for java 1.7
13041 (increment versionCode, re-upload to Play Store)
13043 Signed-off-by: Mike Beattie <mike@ethernal.org>
13045 commit ac12e77e3dffc9e9ddb1578a38b32783ad64e940
13046 Author: Bdale Garbee <bdale@gag.com>
13047 Date: Thu Dec 19 03:22:21 2013 -0700
13049 updated notes from 1.3 release
13051 commit 27528961457865acc3a38b822268df6d7cb86cfd
13052 Merge: 4006eff a31629d
13053 Author: Bdale Garbee <bdale@gag.com>
13054 Date: Thu Dec 19 02:00:10 2013 -0700
13056 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
13058 commit 4006effc538289c36a1563c1b717231991292c0c
13059 Author: Bdale Garbee <bdale@gag.com>
13060 Date: Thu Dec 19 01:58:24 2013 -0700
13062 fix missing newline at end of src/test/Makefile
13064 commit a31629dfceb5e9cf1d5c654b8bd87d575f73c34b
13065 Author: Keith Packard <keithp@keithp.com>
13066 Date: Thu Dec 19 00:58:50 2013 -0800
13068 altosui: Ship EasyMini firmware too
13070 Missing the FIRMWARE_EMINI define left all easy mini firmware out of
13073 Signed-off-by: Keith Packard <keithp@keithp.com>
13075 commit bc3610d8cecbfed40c62d4dcb93fc9a4d2a7c9e3
13076 Author: Bdale Garbee <bdale@gag.com>
13077 Date: Thu Dec 19 01:29:55 2013 -0700
13079 update ChangeLog from git
13081 commit 701c26ed85c28ac59e338975f2a6ba6bd25f6493
13082 Author: Keith Packard <keithp@keithp.com>
13083 Date: Thu Dec 19 00:16:16 2013 -0800
13085 altosdroid: bump versionName to 1.3 and versionCode to 4
13087 Signed-off-by: Keith Packard <keithp@keithp.com>
13089 commit 9f95ffbad918a73cfd5460d6ce037d680465c35d
13090 Author: Keith Packard <keithp@keithp.com>
13091 Date: Thu Dec 19 00:12:21 2013 -0800
13093 altosui: When device has no valid romconfig, set RF cal to 0
13095 This is intended to signal to the user that no valid value was found
13096 and that they'd best pick something sensible.
13098 Signed-off-by: Keith Packard <keithp@keithp.com>
13100 commit a04c1dd5df76c9127615bc797a9d9f764eec1234
13101 Author: Keith Packard <keithp@keithp.com>
13102 Date: Thu Dec 19 00:08:50 2013 -0800
13104 altos/lpc: Stop sending SETUP IN when the requested size is reached
13106 The host won't keep asking for SETUP IN packets once it has received
13107 the amount of data requested, so check to see if we've sent that much
13108 and flip back to IDLE state if so.
13110 Signed-off-by: Keith Packard <keithp@keithp.com>
13112 commit 1ab12861c3e70d7c22b27d988546a925616a0adc
13113 Author: Keith Packard <keithp@keithp.com>
13114 Date: Wed Dec 18 23:27:34 2013 -0800
13116 altos/lpc: Reset less of the device on USB reset.
13118 This leaves most of the device configured across USB reset, which
13119 appears to help when sending a IN reply to the first SETUP packet;
13120 without this change, the IN reply would always get a length of 0,
13121 which is fine for SET_ADDRESS, but not for GET_DESCRIPTOR_DEVICE,
13122 which OS X appears to send before setting the address (go figure).
13124 Signed-off-by: Keith Packard <keithp@keithp.com>
13126 commit 3b13cc2ca035b13582cd2e59ba7286f872f43c6e
13127 Author: Keith Packard <keithp@keithp.com>
13128 Date: Wed Dec 18 22:00:13 2013 -0800
13130 altoslib: Remove some old debug printfs for self flashing
13132 These aren't necessary anymore and just slow down flashing boards.
13134 Signed-off-by: Keith Packard <keithp@keithp.com>
13136 commit 408b0dea338147382e94717dab85b4a204e7bdf5
13137 Author: Keith Packard <keithp@keithp.com>
13138 Date: Wed Dec 18 21:08:33 2013 -0800
13140 micropeak: Add micropeak man page
13142 Signed-off-by: Keith Packard <keithp@keithp.com>
13144 commit 2b2ba87d5f68b9e052dddd49d69341f36d777122
13145 Author: Keith Packard <keithp@keithp.com>
13146 Date: Wed Dec 18 21:02:15 2013 -0800
13148 ao-tools: Add man pages for ao-flash utilities
13150 These aren't very wordy, but these tools are pretty simple scripts.
13152 Signed-off-by: Keith Packard <keithp@keithp.com>
13154 commit 39cb8c2896317b7538353be979ac99baffc14489
13155 Merge: 2a6016c ee42796
13156 Author: Bdale Garbee <bdale@gag.com>
13157 Date: Wed Dec 18 21:53:52 2013 -0700
13159 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
13161 commit 2a6016cfabc8cd56f5219871e3b3df316a639289
13162 Author: Bdale Garbee <bdale@gag.com>
13163 Date: Wed Dec 18 21:53:36 2013 -0700
13165 update Debian standards version we claim compliance with
13167 commit ee4279613b4757453d0d8f8afc06037c61eeb520
13168 Author: Keith Packard <keithp@keithp.com>
13169 Date: Wed Dec 18 20:32:05 2013 -0800
13171 altos: Try IMU self-test 10 times before giving up
13173 This should keep the device from failing to boot unless the IMU is
13174 actually broken. Oh, and if self test does fail, this places the
13175 flight computer in 'Invalid' state rather than panic.
13177 Signed-off-by: Keith Packard <keithp@keithp.com>
13179 commit 1bf84ec28a41f7bd1b11ba45b4639856266227bc
13180 Author: Keith Packard <keithp@keithp.com>
13181 Date: Wed Dec 18 20:30:58 2013 -0800
13183 doc: Add tables describing AltOS beeps and flashes
13185 Provide a convenient place to reference when listening to the device.
13187 Signed-off-by: Keith Packard <keithp@keithp.com>
13189 commit 0673344289772ed89483948184d6608c272c7c26
13190 Author: Keith Packard <keithp@keithp.com>
13191 Date: Wed Dec 18 18:20:55 2013 -0800
13193 altos/stm: Semantic error in STM usb disable caused it to not work
13195 The USB enable register wasn't actually getting rewritten with the
13196 enable bit turned off, so the USB device was still powered on in flight.
13198 Signed-off-by: Keith Packard <keithp@keithp.com>
13200 commit 122f491e459b6ff417932370b3f1aa2091c71aca
13201 Author: Bdale Garbee <bdale@gag.com>
13202 Date: Wed Dec 18 18:30:54 2013 -0700
13204 update release docs to include option for submodules
13206 commit d9982c257463f23be940eea66bd4dc3aadff0043
13207 Merge: 1b97ed2 b63fc05
13208 Author: Bdale Garbee <bdale@gag.com>
13209 Date: Wed Dec 18 18:25:35 2013 -0700
13211 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
13213 commit 1b97ed2b64bcbcd969124964f1e49837899f1c70
13214 Author: Bdale Garbee <bdale@gag.com>
13215 Date: Wed Dec 18 18:25:03 2013 -0700
13217 we're using packaged and local-to-our-tree ARM toolchain now
13219 commit b63fc05481bf6d57e6385704ce53c1c19afa9c2e
13220 Author: Keith Packard <keithp@keithp.com>
13221 Date: Wed Dec 18 14:34:31 2013 -0800
13223 doc: typo in micropeak doc hole->hold
13225 commit 6827961c002757f8e74de44f6eb9c9029d099ebc
13226 Author: Keith Packard <keithp@keithp.com>
13227 Date: Wed Dec 18 14:25:41 2013 -0800
13229 doc: Update micropeak quick start guide to note new boost detect
13231 Now waits for one minute and 30m of altitude change to avoid false detections.
13233 Signed-off-by: Keith Packard <keithp@keithp.com>
13235 commit c0966cd40f05f3a65b0c977b4b92586a58192f4b
13236 Author: Keith Packard <keithp@keithp.com>
13237 Date: Wed Dec 18 14:22:51 2013 -0800
13239 micropeak: Compile for java 6
13241 Don't a require later version as not all target OSes support it
13243 Signed-off-by: Keith Packard <keithp@keithp.com>
13245 commit eea036650e62bc0f8652155974b512686754fd13
13246 Author: Keith Packard <keithp@keithp.com>
13247 Date: Wed Dec 18 14:08:41 2013 -0800
13249 Move pdclib build results to pdclib-root
13251 This makes pdclib easier to manage as a submodule
13253 Signed-off-by: Keith Packard <keithp@keithp.com>
13255 commit c1bfe09b6d3eb28d0c7cfe07a248843cf81bcd25
13256 Author: Keith Packard <keithp@keithp.com>
13257 Date: Wed Dec 18 13:36:04 2013 -0800
13259 altosui: Remove some debug printfs
13261 Signed-off-by: Keith Packard <keithp@keithp.com>
13263 commit 58ceb9c845d51547244538fe6beec27e9a232af8
13264 Author: Keith Packard <keithp@keithp.com>
13265 Date: Wed Dec 18 13:25:31 2013 -0800
13267 altosdroid: Use altoslib standard voltages to control lights
13269 Signed-off-by: Keith Packard <keithp@keithp.com>
13271 commit dbcf3264f950c4e1d450828c9f161b4c418bee97
13272 Author: Keith Packard <keithp@keithp.com>
13273 Date: Wed Dec 18 13:22:45 2013 -0800
13275 altoslib: Define 3.8 as a good battery and 3.5 as a good igniter
13277 Use defined values everywhere instead of copying. Adjust battery up to
13278 3.8 to ensure there's enough voltage to not trip the comparators
13280 Signed-off-by: Keith Packard <keithp@keithp.com>
13282 commit b19a648b667c298d2d9d5ed4ee9db661be058d1a
13283 Author: Keith Packard <keithp@keithp.com>
13284 Date: Wed Dec 18 13:09:48 2013 -0800
13286 altoslib: create eeprom download thread before telling monitor about it
13288 Telling the monitor too early resulted in passing a null thread
13289 handle, which meant that 'cancel' wouldn't ever work.
13291 Signed-off-by: Keith Packard <keithp@keithp.com>
13293 commit 216405bc49ef2fc0e9941989f054e41f2fef9cfe
13294 Author: Keith Packard <keithp@keithp.com>
13295 Date: Wed Dec 18 12:40:22 2013 -0800
13297 altoslib: Don't close telemetry reader at startup unless something fails
13299 Was always closing the file, which led to very little telemetry being received.
13301 Signed-off-by: Keith Packard <keithp@keithp.com>
13303 commit f2e589c59ed0a4c586c5accca8772df15010c46a
13304 Author: Keith Packard <keithp@keithp.com>
13305 Date: Wed Dec 18 12:16:55 2013 -0800
13307 libaltos: Import newly build libaltos.dylib
13309 commit 0484ca97828da0d56be7bf395fa4a4b09c591e02
13310 Author: Keith Packard <keithp@keithp.com>
13311 Date: Wed Dec 18 12:15:54 2013 -0800
13313 libaltos: remove usb id filtering from darwin code
13315 Signed-off-by: Keith Packard <keithp@keithp.com>
13317 commit 36197a388a9ba1d1ee4acd96ac0079ad3af9d3d0
13318 Author: Keith Packard <keithp@keithp.com>
13319 Date: Wed Dec 18 12:15:22 2013 -0800
13321 libaltos: fix test harness main type
13323 Signed-off-by: Keith Packard <keithp@keithp.com>
13325 commit 119dd56512404e0c39dd5001ba4da9373515c02c
13326 Author: Keith Packard <keithp@keithp.com>
13327 Date: Wed Dec 18 11:25:05 2013 -0800
13329 altosui: Add docs to Mac OS X dmg distribution
13331 Signed-off-by: Keith Packard <keithp@keithp.com>
13333 commit 6df58bb0115a8da13d35ab38861f6231bea7f2a7
13334 Merge: 4383baf 02195f2
13335 Author: Bdale Garbee <bdale@gag.com>
13336 Date: Wed Dec 18 12:19:31 2013 -0700
13338 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
13340 commit 4383bafc6ccdde10f06882ba3e96126c61d5e988
13341 Author: Bdale Garbee <bdale@gag.com>
13342 Date: Wed Dec 18 12:18:30 2013 -0700
13344 a fresher changelog entry for test builds
13346 commit 7db8e8190bc8b9a17a7b5107954e2362a0e9c7a2
13347 Author: Bdale Garbee <bdale@gag.com>
13348 Date: Wed Dec 18 11:08:55 2013 -0700
13350 need to include the Cortex toolchain
13352 commit 02195f2970fb7243fd9a9992abb6ada6709db4e1
13353 Author: Keith Packard <keithp@keithp.com>
13354 Date: Wed Dec 18 11:14:40 2013 -0800
13356 fix git: path for pdclib
13358 Signed-off-by: Keith Packard <keithp@keithp.com>
13360 commit fbca372edd5609bc253b622b55b7faffd19ae6cd
13361 Author: Keith Packard <keithp@keithp.com>
13362 Date: Wed Dec 18 11:12:44 2013 -0800
13364 Use git: path for pdclib
13366 Signed-off-by: Keith Packard <keithp@keithp.com>
13368 commit e2635d07d0f0a91dd7d59f2c94765a40907d2732
13369 Author: Keith Packard <keithp@keithp.com>
13370 Date: Wed Dec 18 11:08:11 2013 -0800
13372 Ignore .dll files in libaltos
13374 Signed-off-by: Keith Packard <keithp@keithp.com>
13376 commit 8fdbdebdbb4d1579fd2af47430807d0d2a78105b
13377 Author: Keith Packard <keithp@keithp.com>
13378 Date: Wed Dec 18 11:07:55 2013 -0800
13380 ao-tools: complain if st-flash is not available
13382 Signed-off-by: Keith Packard <keithp@keithp.com>
13384 commit 8f529633cd4be8a0edb1b067bbf5d7cc055dcc1b
13385 Author: Keith Packard <keithp@keithp.com>
13386 Date: Wed Dec 18 10:55:06 2013 -0800
13388 altos: get stm-bringup building again
13390 Signed-off-by: Keith Packard <keithp@keithp.com>
13392 commit 262ee65885d55902df96f4aec6a114f5ac6f2c61
13393 Author: Keith Packard <keithp@keithp.com>
13394 Date: Wed Dec 18 10:53:09 2013 -0800
13396 Remove stale stm test apps from regular build
13398 commit 90386115204bd3bfa55deb5ebe1972bacdba725a
13399 Author: Keith Packard <keithp@keithp.com>
13400 Date: Wed Dec 18 10:50:45 2013 -0800
13402 altos/stm: Update pdclib paths for flash-loader builds
13404 Signed-off-by: Keith Packard <keithp@keithp.com>
13406 commit eb659fb0ee80c25312be36b3d8adb686813db125
13407 Author: Keith Packard <keithp@keithp.com>
13408 Date: Wed Dec 18 10:43:16 2013 -0800
13410 altos: create target pdclib directories before building
13412 commit 9c200c3bc742b4dd1a7e28bfce9d5b27e833aae5
13413 Author: Keith Packard <keithp@keithp.com>
13414 Date: Wed Dec 18 10:01:29 2013 -0800
13416 altos: Build pdclib locally if necessary
13418 Signed-off-by: Keith Packard <keithp@keithp.com>
13420 commit fbde0c3e4bdb419d6bd4dbcc96b0e01c59e9fa13
13421 Author: Keith Packard <keithp@keithp.com>
13422 Date: Wed Dec 18 09:59:33 2013 -0800
13424 include pdclib in wrong place
13426 commit 77b04d662a6704f5db10522a2f9b169d31df5bea
13427 Author: Keith Packard <keithp@keithp.com>
13428 Date: Wed Dec 18 02:03:15 2013 -0800
13430 altosui: Hide non-applicable altimeter config values
13432 This makes configuring EasyMini a lot easier...
13434 Signed-off-by: Keith Packard <keithp@keithp.com>
13436 commit 012abeda6ae846d74729e96e7ed7c8af2edca572
13437 Author: Keith Packard <keithp@keithp.com>
13438 Date: Wed Dec 18 02:02:12 2013 -0800
13440 altos/lpc: Be a bit more resistant to toolchain section name changes
13442 Just add some wild cards on the ends of each section name in case the
13443 toolchain changes names in the future.
13445 Signed-off-by: Keith Packard <keithp@keithp.com>
13447 commit e26306c9350ef1d107d4257ef1c09d15165c9154
13448 Author: Keith Packard <keithp@keithp.com>
13449 Date: Wed Dec 18 01:14:11 2013 -0800
13451 altoslib: Pass InterruptedException up the stack instead of hiding it
13453 When interrupting a thread that is talking to a serial device, it's
13454 important not to have that thread discard the InterruptedException so
13455 that it will actually terminate. This patch removes a bunch of places
13456 that were discarding InterruptedExceptions and lets higher level code
13457 see them so that they can exit cleanly.
13459 Signed-off-by: Keith Packard <keithp@keithp.com>
13461 commit 18852efa108ba6e6e69dfd5076d4f4c01f62b4ef
13462 Author: Keith Packard <keithp@keithp.com>
13463 Date: Wed Dec 18 01:12:11 2013 -0800
13465 altos: Make TeleMega v0.1 work more like TeleMega v1.0
13467 I've still got one working v0.1 board which is useful for testing
13468 stuff, so make it work more like the released TeleMega:
13470 * Use E for drogue, F for main
13471 * Use on-chip eeprom for config
13472 * Fix ADC report printf to match
13474 Signed-off-by: Keith Packard <keithp@keithp.com>
13476 commit 1f035ac2df1cfa6964ae904aba0aedde279ca921
13477 Author: Keith Packard <keithp@keithp.com>
13478 Date: Tue Dec 17 23:50:54 2013 -0800
13480 altos: Use all 16 bits of setup packet len when limiting reply len
13482 We were only using the low 8 bits of the setup packet reply max len,
13483 which meant that if the other side sent a weird max len (as Windows 7
13484 does), then we'd truncate our setup reply to whatever was in the low 8
13485 bits of that value.
13487 Signed-off-by: Keith Packard <keithp@keithp.com>
13489 commit 1280ba2e51b36f417f3adb6d101405ee75e7e509
13490 Author: Keith Packard <keithp@keithp.com>
13491 Date: Tue Dec 17 22:53:45 2013 -0800
13493 altosui: Add EasyMini bits to fat distribution images. Update telemetrum.inf
13495 Signed-off-by: Keith Packard <keithp@keithp.com>
13497 commit 212a1b66ae04317b7b42ba57573b910fde09ca6c
13498 Author: Keith Packard <keithp@keithp.com>
13499 Date: Tue Dec 17 20:24:19 2013 -0800
13501 doc: Publish images with HTML bits
13503 Otherwise the html won't render right.
13505 Signed-off-by: Keith Packard <keithp@keithp.com>
13507 commit 2ecb6a8276b2ce40d2a4da586dbc17581cfda26d
13508 Author: Keith Packard <keithp@keithp.com>
13509 Date: Tue Dec 17 20:23:00 2013 -0800
13511 altos: Broke TeleMetrum GPS reporting by holding the GPS mutex too much
13513 We can't hold the GPS mutex while waiting for the GPS receiver to load
13514 data as it protects the GPS data with the GPS mutex.
13516 Signed-off-by: Keith Packard <keithp@keithp.com>
13518 commit e44ce127ece149e7b07be49142bc0f9d50bbe97d
13519 Author: Keith Packard <keithp@keithp.com>
13520 Date: Tue Dec 17 20:05:12 2013 -0800
13522 doc: Add screen shots everywhere
13524 This has screen shots of every dialog in altosui
13526 Signed-off-by: Keith Packard <keithp@keithp.com>
13528 commit e4b223df372348718b74d2ecad4957f3e30f8d79
13529 Author: Keith Packard <keithp@keithp.com>
13530 Date: Tue Dec 17 17:37:39 2013 -0800
13532 Add altosui image and attempt to add launch photo to title
13534 commit 1d093383fe58fc8c8c11e1c7cd1cd929ae1bd9e4
13535 Author: Bdale Garbee <bdale@gag.com>
13536 Date: Tue Dec 17 14:53:59 2013 -0700
13538 further documentation tweaks
13540 commit 90c88bab305c43eb62f964fd3ff350b8b0b5320d
13541 Merge: d5d6d10 dffbdd9
13542 Author: Bdale Garbee <bdale@gag.com>
13543 Date: Tue Dec 17 14:09:30 2013 -0700
13545 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
13548 doc/altusmetrum.xsl
13550 commit d5d6d10ceb724081c7cf89a3885d7e6c3da14604
13551 Author: Bdale Garbee <bdale@gag.com>
13552 Date: Tue Dec 17 14:08:12 2013 -0700
13554 capture my changes so far
13556 commit dffbdd93d7a86a12d83a412de37dfd2a5f063995
13557 Author: Keith Packard <keithp@keithp.com>
13558 Date: Tue Dec 17 11:38:46 2013 -0800
13560 doc: Add product pictures to manual
13562 Signed-off-by: Keith Packard <keithp@keithp.com>
13564 commit 9d8da4ef325171960e16fc027c6039cb63eae942
13565 Author: Keith Packard <keithp@keithp.com>
13566 Date: Tue Dec 17 11:19:54 2013 -0800
13568 Keep tables together on a page
13570 commit 7acd0cf17c5ca7a00893f35c7fe9c657389070e0
13571 Author: Keith Packard <keithp@keithp.com>
13572 Date: Tue Dec 17 10:33:29 2013 -0800
13574 doc: Convert several more itemizedlists to variablelists
13576 When defining a term, use variablelist to pull the term out to the left.
13578 Signed-off-by: Keith Packard <keithp@keithp.com>
13580 commit 8bb6dd75a602792936d623713fb009fea25ef491
13581 Author: Keith Packard <keithp@keithp.com>
13582 Date: Mon Dec 16 21:21:24 2013 -0800
13584 Clean up reflashing section, include section on self-flash recovery
13586 Signed-off-by: Keith Packard <keithp@keithp.com>
13588 commit 1562affc4951e147eba20380ea5be2e9f7152789
13589 Author: Keith Packard <keithp@keithp.com>
13590 Date: Sat Dec 14 11:47:31 2013 -0800
13592 ao-tools: Use st-flash for STM flashing instead of openocd
13594 st-flash, from the stlink tools, appears more reliable when flashing
13597 Signed-off-by: Keith Packard <keithp@keithp.com>
13599 commit 7d7ae63d8dfcc99a30285e0bd2411901941d1813
13600 Author: Bdale Garbee <bdale@gag.com>
13601 Date: Sat Dec 14 12:16:03 2013 -0700
13603 add serial number to ao-usbload call, pass SERIAL to cal-freq
13605 commit c94ca50fd9f24f271c160f6e0e95cb7340289354
13606 Author: Bdale Garbee <bdale@gag.com>
13607 Date: Fri Dec 13 18:37:29 2013 -0700
13609 temporarily force stlink location in debian/rules to allow complete build
13611 commit 6545a72012e94a50d185e1c4ecff3c3769d60acd
13612 Author: Keith Packard <keithp@keithp.com>
13613 Date: Tue Dec 10 00:54:32 2013 -0800
13615 java: Missed libaltos java compile flags from previous patch
13617 Signed-off-by: Keith Packard <keithp@keithp.com>
13619 commit 8959c059ec67f5334e31abbe3f831dd571a0b464
13620 Author: Keith Packard <keithp@keithp.com>
13621 Date: Tue Dec 10 00:51:01 2013 -0800
13623 java: Add -target 1.6 to all java compiles
13625 This makes sure the results can run with the old JVM
13627 Signed-off-by: Keith Packard <keithp@keithp.com>
13629 commit a4596c134aa5e7867f1ca1d86d36afb2af9b8999
13630 Author: Keith Packard <keithp@keithp.com>
13631 Date: Tue Dec 10 00:39:52 2013 -0800
13633 altos: Remove ARM .ihx files on 'make clean'
13635 Signed-off-by: Keith Packard <keithp@keithp.com>
13637 commit 50753e84871b2a01d270d28b8b77a19614d2180c
13638 Author: Keith Packard <keithp@keithp.com>
13639 Date: Tue Dec 10 00:03:20 2013 -0800
13641 Set version to 1.3 in preparation for release
13643 Signed-off-by: Keith Packard <keithp@keithp.com>
13645 commit 54f7888dc65ffc27c6ee5ef93953bd9b8fc029ed
13646 Author: Keith Packard <keithp@keithp.com>
13647 Date: Tue Dec 10 00:00:31 2013 -0800
13649 doc: More altusmetrum.xsl updates for 1.3
13651 Spell checking even
13653 Signed-off-by: Keith Packard <keithp@keithp.com>
13655 commit a140b3ad689bcebdcf87caab1e64048f693a9b85
13656 Author: Keith Packard <keithp@keithp.com>
13657 Date: Mon Dec 9 23:16:13 2013 -0800
13659 debian: .ihx and .map files are left in subdirs now
13661 Install them from the right place
13663 Signed-off-by: Keith Packard <keithp@keithp.com>
13665 commit 95c1a5a61267233cf2c16175aeb73bfb7d12ba8f
13666 Author: Keith Packard <keithp@keithp.com>
13667 Date: Mon Dec 9 23:14:55 2013 -0800
13669 altosui: Ship TeleMega-v1.0 firmware
13671 Signed-off-by: Keith Packard <keithp@keithp.com>
13673 commit b023c87e2b86ba57cbf97be1ab76b532e0a00fad
13674 Author: Keith Packard <keithp@keithp.com>
13675 Date: Mon Dec 9 23:12:40 2013 -0800
13677 ao-bringup: Add turnon_telemega script
13679 And a few helper programs
13681 Signed-off-by: Keith Packard <keithp@keithp.com>
13683 commit ecb0465be76e9299511aeec663d267967834f6c3
13684 Author: Keith Packard <keithp@keithp.com>
13685 Date: Mon Dec 9 16:06:22 2013 -0800
13687 altos: Rename telemega-v0.3 to telemega-v1.0
13689 Signed-off-by: Keith Packard <keithp@keithp.com>
13691 commit dd91a5d5069ff940e07b8817a934ee65d4e8e235
13692 Author: Keith Packard <keithp@keithp.com>
13693 Date: Sun Dec 8 21:08:36 2013 -0800
13695 altos: Oops. Was only filling out part of the TeleMetrum ADC record
13697 Because it's missing a return, we'd end up filling out one element of
13698 the ADC record per interrupt, and rotating through which one was set,
13699 hitting all of the even offsets within the struct. Yikes!
13701 Signed-off-by: Keith Packard <keithp@keithp.com>
13703 commit c1711890c002fe359bd6c3fdf4092b35d464c6d9
13704 Author: Keith Packard <keithp@keithp.com>
13705 Date: Sun Dec 8 21:07:17 2013 -0800
13707 altosui: When flashing to TeleDongle or TeleBT, match any .ihx file
13709 Let the user pick any .ihx file when using a device which can only be
13710 used as a pair programmer. Note that 'telemetrum' can be either, and
13711 we'll assume that it's a self-programmed device (v2) for now.
13713 Signed-off-by: Keith Packard <keithp@keithp.com>
13715 commit 710343a23c7e6e9c079eafdf3aeea8a40cc2ce61
13716 Author: Keith Packard <keithp@keithp.com>
13717 Date: Sun Dec 8 20:34:11 2013 -0800
13719 altosui: Match directories in hex file matcher
13721 This makes it possible to navigate around the file system
13723 Signed-off-by: Keith Packard <keithp@keithp.com>
13725 commit fd92bb8ff3be257925bf6e969d93a7f9dd941fb8
13726 Author: Keith Packard <keithp@keithp.com>
13727 Date: Sun Dec 8 20:33:22 2013 -0800
13729 altoslib: Don't require radio_cal or usb_descriptors in AltosRomconfig
13731 Not all products will have these values, so allow them to be missing
13733 Signed-off-by: Keith Packard <keithp@keithp.com>
13735 commit 68adbf5bf08ed8af2f34c0d95d9c3d457574372d
13736 Author: Keith Packard <keithp@keithp.com>
13737 Date: Sun Dec 8 20:11:46 2013 -0800
13739 Add new tools to .gitignore
13741 Signed-off-by: Keith Packard <keithp@keithp.com>
13743 commit 2cdb90d9214f8e66b3574cbd9c5ed073a7861681
13744 Author: Keith Packard <keithp@keithp.com>
13745 Date: Sun Dec 8 20:09:10 2013 -0800
13747 altoslib: Add self-flashing code
13749 This adds the ability to use the AltOS flash-loader on both STM and
13752 Signed-off-by: Keith Packard <keithp@keithp.com>
13754 commit 70d0841b4017e7580c893c7033c04fb2964adab6
13755 Author: Keith Packard <keithp@keithp.com>
13756 Date: Sun Dec 8 20:07:23 2013 -0800
13758 altoslib: Add AltosNoSymbol exception
13760 Signed-off-by: Keith Packard <keithp@keithp.com>
13762 commit 4e1b134e29313a1bdac18de57fe547299e5ded2a
13763 Author: Keith Packard <keithp@keithp.com>
13764 Date: Sun Dec 8 20:04:43 2013 -0800
13766 altoslib: Use symbols in AltosRomconfig instead of fixed offsets
13768 The new Hexfile symbol code automatically adds the needed romconfig
13769 symbols for cc1111 products, and ARM-based products have symbols in
13770 the .ihx files. This means that we can rely on using symbols when
13771 finding config values in memory.
13773 Signed-off-by: Keith Packard <keithp@keithp.com>
13775 commit 1183417145de549b9281f9e210d216facf3a94ef
13776 Author: Keith Packard <keithp@keithp.com>
13777 Date: Sun Dec 8 19:59:37 2013 -0800
13779 altosuilib: Don't match product_altusmetrum for product_basestation or product_altimeter
13781 It's been years since we've shipped boards configured with
13782 product_altusmetrum, but now we've repurposed that code for the flash
13783 loader. When matching an explicit product, go ahead and also match
13784 altusmetrum so that the flash loader will fit, but when matching
13785 basestation or altimeter, don't as that will avoid popping up the
13786 flight monitor UI at startup when a board is running the boot loader.
13788 Signed-off-by: Keith Packard <keithp@keithp.com>
13790 commit e0af4569446b12c026aa0ffd52c55839d69af0e1
13791 Author: Keith Packard <keithp@keithp.com>
13792 Date: Sun Dec 8 19:48:27 2013 -0800
13794 altoslib: Publish mapping from product name back to USB id
13796 This lets us choose which device to flash based on the filename
13798 Signed-off-by: Keith Packard <keithp@keithp.com>
13800 commit 88fa5fa6acbdd66d1338ca73cbbac219d62b5136
13801 Author: Keith Packard <keithp@keithp.com>
13802 Date: Sun Dec 8 19:47:44 2013 -0800
13804 altoslib: Create AltosProgrammer class
13806 This provides an abstract interface to flashing boards, for
13807 dongle-based and self-programming boards.
13809 Signed-off-by: Keith Packard <keithp@keithp.com>
13811 commit 7b0c1fbccb4ef1ae2ed356292cc8762360532b7f
13812 Author: Keith Packard <keithp@keithp.com>
13813 Date: Sun Dec 8 19:46:30 2013 -0800
13815 altoslib: Add symbols to .ihx files
13817 Create a new 0xfe record type to hold the symbols, and append them
13818 after the EOF record so that other tools might continue to work.
13820 Signed-off-by: Keith Packard <keithp@keithp.com>
13822 commit b1ffdaf1f5e9b6e8ff0d4e08d8c504f8dfacd3a4
13823 Author: Keith Packard <keithp@keithp.com>
13824 Date: Sun Dec 8 19:43:13 2013 -0800
13826 altoslib: Support binary reading/writing in AltosLink
13828 Binary reads require an explicit length, and do not work while
13829 telemetry is running.
13831 Signed-off-by: Keith Packard <keithp@keithp.com>
13833 commit 2cb7a96567e1302a699f78290fab5e29693940ab
13834 Author: Keith Packard <keithp@keithp.com>
13835 Date: Sun Dec 8 19:05:01 2013 -0800
13837 altos/stm: arm-none-eabi-binutils now puts 'main' into .text.startup
13839 Change name of .text.ram to .ramtext, then load .text* into flash and
13840 .ramtext into ram. This ensures that 'main' and anything else in a
13841 random .text.* segment will get loaded into flash as appropriate.
13843 Signed-off-by: Keith Packard <keithp@keithp.com>
13845 commit 3e22a0dce4248cce862147c985078de44c427b12
13846 Author: Keith Packard <keithp@keithp.com>
13847 Date: Sun Dec 8 19:04:11 2013 -0800
13849 ao-tools: build ao-usbload by default
13851 Signed-off-by: Keith Packard <keithp@keithp.com>
13853 commit b1f3525afa801038f7087a3a2caf369f2460a5db
13854 Author: Keith Packard <keithp@keithp.com>
13855 Date: Sun Dec 8 11:41:09 2013 -0800
13857 altoslib: AltosEepromMonitor had false import of altosuilib
13859 Not needed, and breaks the build
13861 Signed-off-by: Keith Packard <keithp@keithp.com>
13863 commit eded084c6caa1f9423d690c8b45c8042f8355987
13864 Author: Keith Packard <keithp@keithp.com>
13865 Date: Sun Dec 8 11:17:28 2013 -0800
13867 altos: remove all versions of stm-demo executable
13869 Signed-off-by: Keith Packard <keithp@keithp.com>
13871 commit bb72b4018dd6a422afe1916d9538bb9ff1e45353
13872 Author: Keith Packard <keithp@keithp.com>
13873 Date: Sun Dec 8 11:15:37 2013 -0800
13875 altos: Change flash loader name to just AltosFlash
13877 Remove the software version string from the product name
13879 Signed-off-by: Keith Packard <keithp@keithp.com>
13881 commit 52b19511222980138faddb2047707baceff0a596
13882 Author: Keith Packard <keithp@keithp.com>
13883 Date: Sun Dec 8 11:14:29 2013 -0800
13885 altos: Build .ihx files for all arm projects
13887 The .ihx version can be processed by the java loader
13889 Signed-off-by: Keith Packard <keithp@keithp.com>
13891 commit a1e4750a7d4af72e8e9086735885f48c9b56c18e
13892 Author: Keith Packard <keithp@keithp.com>
13893 Date: Sun Dec 8 11:11:41 2013 -0800
13895 altos: Allow products to override default 100mA USB current
13897 This will allow products to specify their own current limit.
13899 Signed-off-by: Keith Packard <keithp@keithp.com>
13901 commit 25aaf6122cbddcbc6a80460dac8ccb9f45743ae0
13902 Author: Keith Packard <keithp@keithp.com>
13903 Date: Sun Dec 8 11:10:00 2013 -0800
13905 ao-tools: Clean up ao-stmload and ao-usbload options. Add --raw
13907 ao-stmload only uses stlink, ao-usbload only uses self-flashing, so
13908 clear up the options in the two programs. The new --raw option skips
13909 the serial and radio cal rewriting when flashing the boot loader.
13911 Signed-off-by: Keith Packard <keithp@keithp.com>
13913 commit ebb36d56c732ffe9cdb8d2ea53d00e1d4ece8f97
13914 Author: Keith Packard <keithp@keithp.com>
13915 Date: Sun Dec 8 11:07:46 2013 -0800
13917 ao-tools: Allow building without stlink and readline
13919 This adds --without-stlink and --without-readline options to configure
13920 to disable these features, and adjusts the build process and code to
13923 Signed-off-by: Keith Packard <keithp@keithp.com>
13925 commit 5fd0dc6f69e7614ba71bbc215b32260a11595af3
13926 Author: Keith Packard <keithp@keithp.com>
13927 Date: Sat Dec 7 23:27:30 2013 -0800
13929 ao-tools: Add ao-flash-stm and ao-flash-lpc scripts
13931 These use openocd to download boot loaders to the arm-based products
13933 Signed-off-by: Keith Packard <keithp@keithp.com>
13935 commit eee9b3ce1e5adae5aa4566050b6d6048344e92c4
13936 Author: Keith Packard <keithp@keithp.com>
13937 Date: Sat Dec 7 09:54:17 2013 -0800
13939 altosuilib: Deal with AltosUnits API change
13941 The abstract methods in AltosUnits now pass the 'imperial_units' flag
13942 explicitly, so deal with that in AltosUnits itself
13944 Signed-off-by: Keith Packard <keithp@keithp.com>
13946 commit 407696f11ac1736e840c9b702592c46197d14c2c
13947 Author: Keith Packard <keithp@keithp.com>
13948 Date: Sat Dec 7 09:53:10 2013 -0800
13950 altosui: Clean up serial close handling
13952 Unify serial close processing in a single function (close_serial),
13953 make everyone else call that. This avoids a couple of cases where the
13954 device would be closed and not removed from the devices_opened list,
13955 leading to 'device is already in use' messages.
13957 Signed-off-by: Keith Packard <keithp@keithp.com>
13959 commit 1a47532f411488f003726aa9365ede5dc90c5b78
13960 Author: Keith Packard <keithp@keithp.com>
13961 Date: Sat Dec 7 09:51:58 2013 -0800
13963 altosui: Don't try to report bearing/elevation without GPS
13965 If the distance from the pad cannot be computed (due to lacking GPS),
13966 then don't try to report it.
13968 Signed-off-by: Keith Packard <keithp@keithp.com>
13970 commit 44249a9262a16ed103aedf30a300003fc2a17579
13971 Author: Keith Packard <keithp@keithp.com>
13972 Date: Sat Dec 7 09:49:00 2013 -0800
13974 altos: Nothing in altos uses AES decryption, so don't compile it
13976 Saves a bit of space where AES is used, and avoids some compiler warnings.
13978 Signed-off-by: Keith Packard <keithp@keithp.com>
13980 commit cdb32b1717db4e8cb8cf94d810e74ce2b569566b
13981 Author: Keith Packard <keithp@keithp.com>
13982 Date: Sat Dec 7 09:47:45 2013 -0800
13984 altos/test: Compute and plot tilt based on GPS track
13986 This lets us compare the gyro-computed tilt angle against the actual
13989 Signed-off-by: Keith Packard <keithp@keithp.com>
13991 commit 6fbf4829569d5edb476654f4e383b834af527dc6
13992 Author: Keith Packard <keithp@keithp.com>
13993 Date: Sat Dec 7 09:40:53 2013 -0800
13995 altos: Telemega uses eeprom, include it in main file
13997 ao_telemega.c didn't include ao_eeprom.h leaving a function undefined
13999 Signed-off-by: Keith Packard <keithp@keithp.com>
14001 commit 2a9b0cdff5db03dc11b6ef69cf5436c834c3acc4
14002 Author: Keith Packard <keithp@keithp.com>
14003 Date: Sat Dec 7 09:39:41 2013 -0800
14005 altos: Add lots more GPS data to mega log
14007 There's plenty of space in the GPS log packets to hold course, speed,
14008 climb and DOP values, so just stick them in.
14010 Signed-off-by: Keith Packard <keithp@keithp.com>
14012 commit de2e812b02a99a2f6d85f15a9600265931f6f6b0
14013 Author: Keith Packard <keithp@keithp.com>
14014 Date: Sat Dec 7 09:38:50 2013 -0800
14016 src/cc1111: Turn off RC osc after xtal is running
14018 There's no reason to keep running the RC oscillator after we switch to
14019 the crystal, so turn it off.
14021 Signed-off-by: Keith Packard <keithp@keithp.com>
14023 commit 473ae38ade0552c5ff3ca088b21345ed5dfad5d0
14024 Author: Keith Packard <keithp@keithp.com>
14025 Date: Thu Nov 28 15:21:26 2013 -0800
14027 doc: First pass for 1.3 finished; docs have most major sections updated.
14029 Final edits and corrections still required.
14031 Signed-off-by: Keith Packard <keithp@keithp.com>
14033 commit 6d9b93bfd637eb690159fc5efda0390eb602c6a7
14034 Author: Keith Packard <keithp@keithp.com>
14035 Date: Thu Nov 28 10:44:07 2013 -0800
14037 ao-tools: Split out USB loader to ao-usbload
14039 Leave ao-stmload using just stlinkv2
14041 Signed-off-by: Keith Packard <keithp@keithp.com>
14043 commit f27dff090c8f3a63bd932715643980703160bde6
14044 Author: Keith Packard <keithp@keithp.com>
14045 Date: Thu Nov 28 10:31:32 2013 -0800
14047 ao-tools: Split out altos symbol editing from ao-stmload
14049 to be shared with ao-usbload
14051 Signed-off-by: Keith Packard <keithp@keithp.com>
14053 commit 5ef287723f8d8bfbfb3582d22bfb5c2a3129414a
14054 Author: Keith Packard <keithp@keithp.com>
14055 Date: Thu Nov 28 09:52:38 2013 -0800
14057 ao-tools: Missing ao-selfload.h
14059 commit e6c9ca218d944443c86555e513534d82713af936
14060 Author: Keith Packard <keithp@keithp.com>
14061 Date: Thu Nov 28 09:52:01 2013 -0800
14063 ao-tools: move 16/32-bit readers from ao-stmload to lib
14065 commit d93a65a90f19e4816231e03b1f399af6e3742aee
14066 Author: Keith Packard <keithp@keithp.com>
14067 Date: Thu Nov 28 09:46:13 2013 -0800
14069 ao-tools: Move ao-selfload into library
14071 This needs to be shared between ao-stmload and ao-usbload
14073 Signed-off-by: Keith Packard <keithp@keithp.com>
14075 commit 14204e3d147ad99cc249ad8de254809180fe5c38
14076 Author: Keith Packard <keithp@keithp.com>
14077 Date: Thu Nov 28 09:31:02 2013 -0800
14079 ao-tools: Add ao-elftohex and .ihx symbol support
14081 ao-elftohex converts an elf file into a hex file so that we can load
14084 Signed-off-by: Keith Packard <keithp@keithp.com>
14086 commit ee07f1a0f8e431bebb3b948f6249f5f33413e966
14087 Author: Keith Packard <keithp@keithp.com>
14088 Date: Thu Nov 28 09:29:52 2013 -0800
14090 ao-tools: Add debug printf support
14092 commit 95a8180f3d7929dbad65c80421f99c925f245af0
14093 Author: Keith Packard <keithp@keithp.com>
14094 Date: Wed Nov 27 13:59:06 2013 -0800
14096 ao-tools: Create general elf and hex library routines
14098 Pulls the elf stuff out of ao-stmload, change the hex stuff into ao_
14101 Signed-off-by: Keith Packard <keithp@keithp.com>
14103 commit 73b1a7e644e255558378ab66de6426a7dfd8a7dc
14104 Author: Keith Packard <keithp@keithp.com>
14105 Date: Mon Nov 25 01:15:36 2013 -0800
14107 doc: Work on AltosUI Pyro config docs a bit more.
14109 Signed-off-by: Keith Packard <keithp@keithp.com>
14111 commit 82b42935d047d2f7c2f7a63a3efb72a3f1d5594e
14112 Author: Keith Packard <keithp@keithp.com>
14113 Date: Mon Nov 25 00:02:06 2013 -0800
14115 altosui: Handle units in pyro config.
14117 This lets you edit the pyro configuration using imperial units if
14120 Signed-off-by: Keith Packard <keithp@keithp.com>
14122 commit 8da565bbafa2925aa889cf9249497a709a814b7f
14123 Author: Keith Packard <keithp@keithp.com>
14124 Date: Mon Nov 25 00:01:20 2013 -0800
14126 doc: Add telemetry enable and APRS interval config docs
14128 Also starts working on the pyro channel config window docs
14130 Signed-off-by: Keith Packard <keithp@keithp.com>
14132 commit f743934ebd1a7c7c8b6db0223f0309e590aa15cd
14133 Author: Keith Packard <keithp@keithp.com>
14134 Date: Sun Nov 24 21:55:20 2013 -0800
14136 doc: use correct quotes in altusmetrum.xsl
14138 Signed-off-by: Keith Packard <keithp@keithp.com>
14140 commit 6f4abc14065aebceaac9313e4dcd4300e19999cf
14141 Author: Keith Packard <keithp@keithp.com>
14142 Date: Sun Nov 24 21:50:27 2013 -0800
14144 doc: "rocketry electronics" instead of listing products
14146 commit 31a1c701bfaea97225e12ea0688b934790e3737e
14147 Author: Keith Packard <keithp@keithp.com>
14148 Date: Sun Nov 24 21:28:26 2013 -0800
14150 Use more 1/4 single characters
14152 commit 96f33e780958adaaa4a9cc127caecaeb3f4c978c
14153 Author: Keith Packard <keithp@keithp.com>
14154 Date: Sun Nov 24 21:25:06 2013 -0800
14156 Remove duplicate log description. Describe pyro config.
14158 Signed-off-by: Keith Packard <keithp@keithp.com>
14160 commit 3eaaefe6d746a2f53995a2470c5024f37c87c393
14161 Author: Keith Packard <keithp@keithp.com>
14162 Date: Sun Nov 24 20:05:52 2013 -0800
14164 Extend the hardware overview chapter. Edit System Operations
14166 Extend the overview chapter to include tables describing the
14167 electronic and physical board characteristics of each board.
14169 Finish most of the System Operation stuff, still need to add pyro
14170 channel configuration
14172 Signed-off-by: Keith Packard <keithp@keithp.com>
14174 commit ceed62fd97972b35f4cf6560625135723cb8610f
14175 Author: Keith Packard <keithp@keithp.com>
14176 Date: Mon Nov 18 13:48:18 2013 -0800
14178 debian: Build now depends on 'xmlto' for docs
14180 This wraps xsltproc, fop and xmllint for formatting pdf files
14182 Signed-off-by: Keith Packard <keithp@keithp.com>
14184 commit 92753d4b8d6b17ebc7a9b65680abd46648726393
14185 Author: Keith Packard <keithp@keithp.com>
14186 Date: Mon Nov 18 12:43:33 2013 -0800
14188 doc: Use system fo docbool.xsl instead of network one
14190 Instead of reading the master stylesheet from the network, just use
14191 the one installed on the system.
14193 Signed-off-by: Keith Packard <keithp@keithp.com>
14195 commit 89fc38f2cf143bed1fe8c4a4972267b15c9aa467
14196 Author: Keith Packard <keithp@keithp.com>
14197 Date: Mon Nov 18 12:42:38 2013 -0800
14199 doc: Make pdf files depend on local stylesheet
14201 Now that we're using our own, rebuild the docs when it changes
14203 Signed-off-by: Keith Packard <keithp@keithp.com>
14205 commit f9bbca59a9034cf7e6df4577e627d7447f3a9d51
14206 Author: Keith Packard <keithp@keithp.com>
14207 Date: Mon Nov 18 12:42:20 2013 -0800
14209 doc: Make micropeak.xsl validate
14211 Signed-off-by: Keith Packard <keithp@keithp.com>
14213 commit 0a3e27e3a392be4cfe03d200068a7e69bb2f3fdb
14214 Author: Keith Packard <keithp@keithp.com>
14215 Date: Mon Nov 18 12:38:52 2013 -0800
14217 Make companion.xsl validate
14219 Signed-off-by: Keith Packard <keithp@keithp.com>
14221 commit d212d782bff977d609a9da1b805de4a2615fb474
14222 Author: Keith Packard <keithp@keithp.com>
14223 Date: Mon Nov 18 12:37:23 2013 -0800
14225 doc: Make telemetry.xsl validate
14227 Signed-off-by: Keith Packard <keithp@keithp.com>
14229 commit 87fbe12bdaf10c9ba7ba43608b1e980cdc09d496
14230 Author: Keith Packard <keithp@keithp.com>
14231 Date: Mon Nov 18 12:29:42 2013 -0800
14233 doc: Make altos.xsl validate
14235 Signed-off-by: Keith Packard <keithp@keithp.com>
14237 commit 963a61986ea4b48fdca0989479e9c50acb0f1a9d
14238 Author: Keith Packard <keithp@keithp.com>
14239 Date: Mon Nov 18 12:12:54 2013 -0800
14241 doc: Switch to xorg style to generate index
14243 This style sheet generates a nice PDF index
14245 Signed-off-by: Keith Packard <keithp@keithp.com>
14247 commit 9953a5f0440b269dac5c675f120e6a31dde8ec69
14248 Author: Keith Packard <keithp@keithp.com>
14249 Date: Mon Nov 18 12:06:31 2013 -0800
14251 doc: Get altusmetrum.xsl to validate
14253 Mostly involved getting the listitem contents into para elements.
14255 Signed-off-by: Keith Packard <keithp@keithp.com>
14257 commit 152d978dc4be49b6b764e5e1966bd860c46054ea
14258 Author: Keith Packard <keithp@keithp.com>
14259 Date: Mon Nov 18 12:05:10 2013 -0800
14261 doc: Start work on 1.3 doc updates
14263 Add 1.3 release notes.
14265 Signed-off-by: Keith Packard <keithp@keithp.com>
14267 commit 71705532374f222e51c66e2f1214dd01b3efc8bd
14268 Author: Keith Packard <keithp@keithp.com>
14269 Date: Tue Nov 12 15:02:50 2013 +0900
14271 Bump to version 1.2.9.4
14273 commit 12481415c2e5fb03b003343c9499df711eb14f91
14274 Author: Keith Packard <keithp@keithp.com>
14275 Date: Tue Nov 12 16:26:02 2013 +0900
14277 altos: include ao_eeprom.h in ao_telemetrum.c to define ao_eeprom_init
14279 Signed-off-by: Keith Packard <keithp@keithp.com>
14281 commit bf893a4149b05b97f18f9f487af805adef859d74
14282 Author: Keith Packard <keithp@keithp.com>
14283 Date: Tue Nov 12 16:22:49 2013 +0900
14285 altos: Make sure flight erase log comes after config blog
14287 Oops. When converting from ao_storage to ao_config, I accidentally had
14288 the flight erase log overwriting the config block.
14290 Signed-off-by: Keith Packard <keithp@keithp.com>
14292 commit 92eafd01f2809f39c5bc4058977c790d94a99df1
14293 Author: Keith Packard <keithp@keithp.com>
14294 Date: Tue Nov 12 16:08:50 2013 +0900
14296 altos: Move telemega to using internal eeprom for config
14298 And crank up the default per-flight storage to 1MB
14300 Signed-off-by: Keith Packard <keithp@keithp.com>
14302 commit 9c53ad6f8222878a26efecebd3bb1d1fe054a4b6
14303 Author: Keith Packard <keithp@keithp.com>
14304 Date: Tue Nov 12 16:06:59 2013 +0900
14306 altos: Move TeleMetrum v2.0 to using internal eeprom for config
14308 This leaves the whole 8MB of flash for flight storage
14310 Signed-off-by: Keith Packard <keithp@keithp.com>
14312 commit 83437b2fe304599e22d0a98b5410808bcb67dc97
14313 Author: Keith Packard <keithp@keithp.com>
14314 Date: Tue Nov 12 15:45:32 2013 +0900
14316 altos: Allow use of internal EEPROM for config storage
14318 This stops exposing eeprom as 'storage' and instead exposes it with a
14319 separate eeprom API so that it can be used for config storage without
14320 also using it for flight log storage.
14322 The config code has been changed to allow it to either use storage for
14323 configuration data or eeprom.
14325 Signed-off-by: Keith Packard <keithp@keithp.com>
14327 commit b57f1cabfe5052306cb4c28793bea477f4aeb2d2
14328 Author: Keith Packard <keithp@keithp.com>
14329 Date: Tue Nov 12 15:18:58 2013 +0900
14331 altos: Don't hold GPS mutex while waiting in TM v2.0 report
14333 Holding the GPS mutex while waiting for the GPS code to dump data into
14334 the GPS variables is rather counter-productive.
14336 Signed-off-by: Keith Packard <keithp@keithp.com>
14338 commit 0951b1ef83d8d741d65811fa23bde43ee843a939
14339 Author: Keith Packard <keithp@keithp.com>
14340 Date: Tue Nov 12 15:18:53 2013 +0900
14342 altos: Build TM v2.0 firmware by default
14344 Signed-off-by: Keith Packard <keithp@keithp.com>
14346 commit 3c40272713d93e79bb0989eefe191cd2bfe56a44
14347 Author: Keith Packard <keithp@keithp.com>
14348 Date: Tue Nov 12 15:01:13 2013 +0900
14350 ignore "compile" script
14352 commit 28327883d377896caddbad0f9efded56a227edd1
14353 Author: Keith Packard <keithp@keithp.com>
14354 Date: Tue Nov 12 14:59:40 2013 +0900
14356 Add TeleMini v2.0 turnon script
14358 commit cffbc025532487bbd9b467476be05d0997b5133e
14359 Author: Keith Packard <keithp@keithp.com>
14360 Date: Tue Nov 12 14:56:47 2013 +0900
14362 ao-tools: add ao-mega man page, ignore executable
14364 commit 40d3575a9365d77ca507ebee226d51d081e1ecc6
14365 Author: Keith Packard <keithp@keithp.com>
14366 Date: Tue Nov 12 14:54:57 2013 +0900
14368 altos: Clean up .gitignore and add a few random files
14370 Signed-off-by: Keith Packard <keithp@keithp.com>
14372 commit 9d2eb0b00a5a0faefce95bce949be7206b0aad37
14373 Author: Keith Packard <keithp@keithp.com>
14374 Date: Tue Nov 12 14:48:21 2013 +0900
14376 Add ublox checksum generating program
14378 commit d5367f20fa1ae71496fde071953c2cda89654071
14379 Author: Keith Packard <keithp@keithp.com>
14380 Date: Tue Nov 12 14:45:51 2013 +0900
14382 Ignore mac .dmg files
14384 commit 0093d5b368669e0c324f8d9dfcd2f004de85ee5c
14385 Author: Keith Packard <keithp@keithp.com>
14386 Date: Tue Nov 12 14:37:57 2013 +0900
14388 altosui, altoslib: Move eeprom download code to altoslib
14390 This should make adding eeprom downloading to altosdroid easier
14392 Signed-off-by: Keith Packard <keithp@keithp.com>
14394 commit 45db3076b257adcf2c9f69ed0927f09d94af7a50
14395 Author: Keith Packard <keithp@keithp.com>
14396 Date: Tue Nov 12 14:28:30 2013 +0900
14398 altosui: Make AltosEepromDownload not swing-dependent
14400 Will move to altoslib
14402 Signed-off-by: Keith Packard <keithp@keithp.com>
14404 commit 6aa99c160f0695eb25ccc0598e4c36224c89dab4
14405 Author: Keith Packard <keithp@keithp.com>
14406 Date: Tue Nov 12 14:06:20 2013 +0900
14408 altoslib: Start moving eeprom download logic to altoslib
14410 Signed-off-by: Keith Packard <keithp@keithp.com>
14412 commit 74d73a2cd0b6a228eb396552e1d16685669349c0
14413 Author: Keith Packard <keithp@keithp.com>
14414 Date: Tue Nov 12 14:03:42 2013 +0900
14416 altoslib: Raise ParseException on invalid eeprom format
14418 Make sure the user knows when data are not downloaded successfully
14419 because the UI doesn't understand the eeprom format.
14421 Signed-off-by: Keith Packard <keithp@keithp.com>
14423 commit bdd6244d8b4a55c9aa4fb79b0cb1a0727afbc2ac
14424 Author: Keith Packard <keithp@keithp.com>
14425 Date: Tue Nov 12 14:01:55 2013 +0900
14427 altos: Add orientation tracking to ao_flight_test
14429 Shows calculated offset from vertical in ao_flight_test output
14431 Signed-off-by: Keith Packard <keithp@keithp.com>
14433 commit 29b48b63305881471d9b97ef3fb236af03cb79f5
14434 Author: Keith Packard <keithp@keithp.com>
14435 Date: Mon Oct 28 00:36:13 2013 -0700
14437 altos: Don't hold GPS mutex while waiting for GPS data in report code
14439 Oops. This kinda breaks anyone else waiting for GPS data
14441 Signed-off-by: Keith Packard <keithp@keithp.com>
14443 commit d3628bd2dd3612065792aef6c7ae5bc967b4f081
14444 Author: Keith Packard <keithp@keithp.com>
14445 Date: Mon Oct 28 00:24:59 2013 -0700
14447 altos: sample profile address range was too narrow
14449 The range was cranked down at some point to diagnose issues within the
14450 task scheduler. Unfortunately, that change got merged, which meant
14451 that general profiling lost information outside of the lower 4kB of code.
14453 Signed-off-by: Keith Packard <keithp@keithp.com>
14455 commit 7c1c6728bce4237ca3a8f6fde01356697a465dfd
14456 Author: Keith Packard <keithp@keithp.com>
14457 Date: Sun Oct 27 23:47:27 2013 -0700
14459 altos: Make telemega v0.3 compile with new quaternion code
14461 Adds lots more math code
14463 Signed-off-by: Keith Packard <keithp@keithp.com>
14465 commit e838bd2847e5684ce93b6f7cbe736ebed681c3c6
14466 Author: Keith Packard <keithp@keithp.com>
14467 Date: Sun Oct 27 23:46:54 2013 -0700
14469 altos: Make telemega v0.1 compile with new quaternion code
14471 Adds the necessary math code
14473 Signed-off-by: Keith Packard <keithp@keithp.com>
14475 commit 9b0ce8ca65d76b9cf55dfff002e13ce2fbb5f7fc
14476 Author: Keith Packard <keithp@keithp.com>
14477 Date: Sun Oct 27 23:45:48 2013 -0700
14479 altos: Add orientation test when HAS_FLIGHT_DEBUG is set
14481 This just dumps the current orientation to stdout so you can monitor
14484 Signed-off-by: Keith Packard <keithp@keithp.com>
14486 commit 5d9e715d570b24ac124c30772b11923bd26ed670
14487 Author: Keith Packard <keithp@keithp.com>
14488 Date: Sun Oct 27 23:44:47 2013 -0700
14490 altos: Update quaternion tests to check vectors_to_rotation
14492 Signed-off-by: Keith Packard <keithp@keithp.com>
14494 commit 195fd70cdc7f519cd8d4ac323088ed0b6c188280
14495 Author: Keith Packard <keithp@keithp.com>
14496 Date: Sun Oct 27 23:42:58 2013 -0700
14498 altos: Change ao_mpu6000_gyro arg to float
14500 This lets callers pass more precision than just the original sensor value
14502 Signed-off-by: Keith Packard <keithp@keithp.com>
14504 commit 3d3fe7e9b6502432868f4430befac871dfea4869
14505 Author: Keith Packard <keithp@keithp.com>
14506 Date: Sun Oct 27 23:42:26 2013 -0700
14508 altos: Fixup for 32-bit gyro averages
14510 Signed-off-by: Keith Packard <keithp@keithp.com>
14512 commit 4bebade9e9004bad81df1a423687f3e3f356f1c2
14513 Author: Keith Packard <keithp@keithp.com>
14514 Date: Sun Oct 27 23:37:55 2013 -0700
14516 altos: Correct incremental rotation computation
14518 Trying to compute the combined rotation by taking the x/y/z rotations
14519 as a vector is a good approximation, but not accurate enough for our
14520 application given the large angles we sometimes see.
14522 Instead, use a correct-but-expensive function with a pile of
14523 transcendental function calls. The STM32L seems to be fast enough at least...
14525 Signed-off-by: Keith Packard <keithp@keithp.com>
14527 commit 06b0c1b768a7d3eae57e66bc9aea25db49f9ea8a
14528 Author: Keith Packard <keithp@keithp.com>
14529 Date: Sun Oct 27 23:35:54 2013 -0700
14531 altos: Compute initial rotation from vertical
14533 This initializes the rotation with the angle from vertical, rather
14534 than simply recording the off-angle vector. Doing this allows us to
14535 accurately track the true orientation of the rocket, instead of just
14536 the offset from the initial non-vertical orientation.
14538 Signed-off-by: Keith Packard <keithp@keithp.com>
14540 commit cdbe8ce33e4a75e85caf07538ed7e997f462b758
14541 Author: Keith Packard <keithp@keithp.com>
14542 Date: Sun Oct 27 23:33:11 2013 -0700
14544 altos: Fixup for ao_sample_orient rename
14546 Signed-off-by: Keith Packard <keithp@keithp.com>
14548 commit d96fd33aa8a220d547512eb43c88fc8f5651e39e
14549 Author: Keith Packard <keithp@keithp.com>
14550 Date: Sun Oct 27 23:28:50 2013 -0700
14552 altos: Add sinf to math code
14554 Needed for the quaternion gyro tracking code
14556 Signed-off-by: Keith Packard <keithp@keithp.com>
14558 commit fa7d0ba0efdde3ac9fb4df0589f9ead07b7ffff5
14559 Author: Keith Packard <keithp@keithp.com>
14560 Date: Sun Oct 27 23:26:28 2013 -0700
14562 altos: Keep 9 more bits of average pad IMU gyro data
14564 This reduces the offset error by a bit, minimizing gyro drift.
14566 Signed-off-by: Keith Packard <keithp@keithp.com>
14568 commit 58f08c4b3cb9049d0c9cb02cde0d8dbdc3d33920
14569 Author: Keith Packard <keithp@keithp.com>
14570 Date: Sun Oct 27 23:23:59 2013 -0700
14572 altos: Rename ao_orient to ao_sample_orient
14574 Keeps it clear where this name comes from.
14576 Signed-off-by: Keith Packard <keithp@keithp.com>
14578 commit c10cb9d31765e6ef0ba737bc484c5aed22a332f9
14579 Author: Keith Packard <keithp@keithp.com>
14580 Date: Sun Oct 27 23:11:37 2013 -0700
14582 altos: Add functions to init quaternions from vector pairs and euler angles
14584 Our low sampling rate means that the "cheap" hack for
14585 integrating quaternion rotations by using sin(x) ≃ x doesn't work, so
14586 instead we have to compute the partial rotation the hard way.
14588 Signed-off-by: Keith Packard <keithp@keithp.com>
14590 commit 3b25860b5b3b69642928dd9c30dec4b4b937a88c
14591 Author: Keith Packard <keithp@keithp.com>
14592 Date: Sun Oct 27 23:11:09 2013 -0700
14594 altos: Add some comments describing quaternion multiplication
14596 Signed-off-by: Keith Packard <keithp@keithp.com>
14598 commit 616977d2955da13383a1869b9ccdb07338172109
14599 Author: Keith Packard <keithp@keithp.com>
14600 Date: Sun Oct 27 23:10:13 2013 -0700
14602 altos: Mark arguments to quaternion functions as const
14604 Lets us pass constants without the compile whinging
14606 Signed-off-by: Keith Packard <keithp@keithp.com>
14608 commit e923e11e185fd42d2a83e18b3d13bd839a72b1aa
14609 Author: Keith Packard <keithp@keithp.com>
14610 Date: Sun Oct 27 22:44:49 2013 -0700
14612 altos: IMU accel calibration values need to be signed
14614 The MPU6000 reports signed values.
14616 Signed-off-by: Keith Packard <keithp@keithp.com>
14618 commit 351d53836e201834a2d89773a08ab7c2dab2b2f4
14619 Author: Keith Packard <keithp@keithp.com>
14620 Date: Fri Oct 25 04:34:16 2013 -0700
14622 altos: Calibrate IMU accelerometers too
14624 Average the IMU accelerometer values pointing up and down so that we
14625 have a zero-g offset for all three axes. This can then be used to
14626 compute which direction the rocket is pointing while sitting on the pad.
14628 Signed-off-by: Keith Packard <keithp@keithp.com>
14630 commit 08143a922fe27bc50a19924f46538f9476ab5fd1
14631 Author: Keith Packard <keithp@keithp.com>
14632 Date: Fri Oct 25 04:05:09 2013 -0700
14634 altos: Add gyro-based orientation tracking
14636 This tracks the angle-from-vertical as an additional input to the pyro
14639 Signed-off-by: Keith Packard <keithp@keithp.com>
14641 commit ba99630f33440b993c69830856d2a7741ffdef71
14642 Author: Keith Packard <keithp@keithp.com>
14643 Date: Fri Oct 25 04:03:39 2013 -0700
14645 altos: Fix GPS test frameworks to handle shared ao_gps_new variable
14647 Signed-off-by: Keith Packard <keithp@keithp.com>
14649 commit b83876718b1a535ee04ca0351ad57814454ec646
14650 Author: Keith Packard <keithp@keithp.com>
14651 Date: Fri Oct 25 04:00:49 2013 -0700
14653 altos: Add floating point math functions from newlib
14655 These are all BSD licensed, so we can simply include them directly
14657 Signed-off-by: Keith Packard <keithp@keithp.com>
14659 commit 039446f54ef6968a3f0b37ce32ca6bdcdbe62546
14660 Author: Keith Packard <keithp@keithp.com>
14661 Date: Mon Oct 14 22:41:43 2013 -0700
14663 altos: Merge GPS logging into a single function
14665 Create a new global, ao_gps_new, which indicates new GPS position and
14668 Use ao_gps_new as the new sleep/wakeup address.
14670 Merge the separate gps position/satellite logging tasks into a single
14671 function which waits for new data and writes out the changed values.
14673 Signed-off-by: Keith Packard <keithp@keithp.com>
14675 commit 5c4b3658a96f1a64ccebf7bddda06b15b4ac4a6f
14676 Author: Keith Packard <keithp@keithp.com>
14677 Date: Mon Oct 14 21:49:39 2013 -0700
14679 altos: Use #define values for ublox packet types
14681 One case was using hex values instead of the #define equivalents.
14683 Signed-off-by: Keith Packard <keithp@keithp.com>
14685 commit db4cd8b3838d27bebdeb6a085a739a36f7634a91
14686 Author: Keith Packard <keithp@keithp.com>
14687 Date: Mon Oct 14 20:42:14 2013 -0700
14689 altoslib,altosui: Be more robust when graphing bogus .telem files
14691 Deal with files containing multiple serial number/flight number values
14692 by preserving the boost_tick value across state resets.
14694 Check for invalid state when computing actual boost time for the stats
14697 Ignore invalid speed/accel values when computing averages.
14699 Signed-off-by: Keith Packard <keithp@keithp.com>
14701 commit 1bd9786802751391cca3b83ac3045029e00e39ee
14702 Author: Keith Packard <keithp@keithp.com>
14703 Date: Sun Oct 13 22:05:20 2013 -0700
14705 altos/micropeak: Increase boost detect to 30m
14707 This meant increasing the data buffering as well so that we could
14708 reliably capture the flight data back to the ground, even for slow
14711 And, with the buffer extra large, we work backwards from the current
14712 buffer location to find the last ground location rather than working
14713 forwards from the first buffered location. This ensures that we don't
14714 capture noise before boost and instead capture a nice flight curve instead.
14716 Signed-off-by: Keith Packard <keithp@keithp.com>
14718 commit e0e98597887a970f31b33895adb77d35e06b34ff
14719 Author: Bdale Garbee <bdale@gag.com>
14720 Date: Thu Oct 10 14:35:54 2013 -0700
14722 updated turn-on script for telebt 1.1
14724 commit 8af5dd05fe56768f225251bbc66831494d80048e
14725 Author: Keith Packard <keithp@keithp.com>
14726 Date: Thu Oct 10 10:02:03 2013 -0700
14728 Another try at skipping broken avr-gcc
14730 Signed-off-by: Keith Packard <keithp@keithp.com>
14732 commit 2296175eff9e4286eaf44451690701a46595987e
14733 Author: Keith Packard <keithp@keithp.com>
14734 Date: Thu Oct 10 09:47:52 2013 -0700
14736 Make sure the AVR compiler can actually link stuff
14738 avr-gcc was broken for a while, causing all linking to fail. Check for
14739 that and don't try to build avr bits in that case.
14741 Signed-off-by: Keith Packard <keithp@keithp.com>
14743 commit aa169b80039728e35b0dec3be66a8483d48a3458
14744 Author: Keith Packard <keithp@keithp.com>
14745 Date: Thu Oct 10 08:04:22 2013 -0700
14747 altos: Fix stm-bringup demo build to use installed pdclib
14749 Signed-off-by: Keith Packard <keithp@keithp.com>
14751 commit d8d3835fedf9b7c4d203f321e72c2b086ebb3b97
14752 Author: Keith Packard <keithp@keithp.com>
14753 Date: Thu Oct 10 00:00:05 2013 -0700
14755 altos: Use installed pdclib
14757 Switch over to the installed pdclib everywhere
14759 Signed-off-by: Keith Packard <keithp@keithp.com>
14761 commit 7f6cbfac7c1965add91ebfc28ca3eac4561b4fb6
14762 Author: Keith Packard <keithp@keithp.com>
14763 Date: Wed Oct 9 12:04:14 2013 -0700
14765 Bump version to 1.2.9.3
14769 Signed-off-by: Keith Packard <keithp@keithp.com>
14771 commit e947bc5e1abcd054a584d69240f91123bad2178e
14772 Author: Keith Packard <keithp@keithp.com>
14773 Date: Wed Oct 9 12:06:30 2013 -0700
14775 doc: Add easymini outline to distribution
14777 Signed-off-by: Keith Packard <keithp@keithp.com>
14779 commit 18cb5f0b8f0917cbd4ff80f0920e8e5b35c822a1
14780 Author: Keith Packard <keithp@keithp.com>
14781 Date: Wed Oct 9 10:14:16 2013 -0700
14783 doc: Add EasyMini outline drawing
14785 Signed-off-by: Keith Packard <keithp@keithp.com>
14787 commit c584b5fc1128c7bfd7fb921ddc3a8ec498803b53
14788 Author: Keith Packard <keithp@keithp.com>
14789 Date: Wed Oct 9 12:37:30 2013 -0700
14791 altos: Messed up the ifeq syntax a bit so ARM bits weren't getting built
14793 $(x) is not the same as ($x)
14795 Signed-off-by: Keith Packard <keithp@keithp.com>
14797 commit 74885d75621dad04984d8309c2618202f4d2b35e
14798 Author: Keith Packard <keithp@keithp.com>
14799 Date: Tue Oct 8 10:03:50 2013 -0700
14801 altosui: Binaries to package are only in per-product dirs now
14803 Each cc1111 project used to stick the binary in src/, but I got rid of
14804 that when we ended up with so much stuff in src that it was a mess.
14806 Building the release now requires looking in the appropriate directory
14807 for each binary to ship.
14809 Signed-off-by: Keith Packard <keithp@keithp.com>
14811 commit 0e5d1f3ce39495e3702ecd22cb45972e13a5c986
14812 Author: Keith Packard <keithp@keithp.com>
14813 Date: Tue Oct 8 09:50:21 2013 -0700
14815 altos: avr-gcc appears to find the loader scripts without help now
14817 At some point, avr-gcc lost its ability to find the loader scripts
14818 necessary to link programs. That appears to be fixed now, at least on
14821 Signed-off-by: Keith Packard <keithp@keithp.com>
14823 commit f7cccbb7a624a2a47b21682f416a135a28319b41
14824 Author: Keith Packard <keithp@keithp.com>
14825 Date: Tue Oct 8 09:39:29 2013 -0700
14827 altos: Broken test for M0 compiler in src/Makefile
14829 Was causing it to try to compiler M0 progs only when *no* compiler was found.
14831 Signed-off-by: Keith Packard <keithp@keithp.com>
14833 commit 488a527267decece48e6682e0e0c7fc29cbed329
14834 Merge: 6a1e398 f6661cc
14835 Author: Keith Packard <keithp@keithp.com>
14836 Date: Tue Oct 8 09:26:41 2013 -0700
14838 Merge remote-tracking branch 'origin/master'
14840 Signed-off-by: Keith Packard <keithp@keithp.com>
14845 commit 6a1e398e590121458176758858bb4210f3eb5a55
14846 Author: Keith Packard <keithp@keithp.com>
14847 Date: Tue Oct 8 09:22:03 2013 -0700
14849 Add --with parameters to configure for compiler selection
14851 This allows the user to specify which compiler to use for each target
14852 CPU. Also checks to make sure the arm compiler supports -m0 and -m3
14853 cpu type flags. The build now actually uses the specified compilers too.
14855 Signed-off-by: Keith Packard <keithp@keithp.com>
14857 commit 16965716c02eb79b449d9d3b264814d775660134
14858 Author: Keith Packard <keithp@keithp.com>
14859 Date: Tue Oct 8 09:20:12 2013 -0700
14861 altos/stm: New GAS version requires flags in APSR assignment
14863 Signed-off-by: Keith Packard <keithp@keithp.com>
14865 commit 258d225df1f4afe1cfdc9c43208bcd75d18cdf2d
14866 Author: Keith Packard <keithp@keithp.com>
14867 Date: Mon Oct 7 22:00:15 2013 -0700
14869 altos: Rename easymini-v0.1 to easymini-v1.0
14871 The production boards are the same as the modified v0.1 boards
14873 Signed-off-by: Keith Packard <keithp@keithp.com>
14875 commit 8f7edcee2db30652ce0b147f282de3396c3786ad
14876 Author: Keith Packard <keithp@keithp.com>
14877 Date: Mon Oct 7 21:53:53 2013 -0700
14879 altos/lpc, altos/stm: ARM requires ISB after switching stack pointers
14881 This sticks a barrier in the CPU to prevent using the wrong stack
14882 register past the change.
14884 Signed-off-by: Keith Packard <keithp@keithp.com>
14886 commit 4254de22864de2ed7ae5928c6b8bfd9df1c8a3fb
14887 Author: Keith Packard <keithp@keithp.com>
14888 Date: Mon Oct 7 21:51:30 2013 -0700
14890 altos: Don't require an LED for ao_flight
14892 EasyMini has no LEDs. Deal with it.
14894 Signed-off-by: Keith Packard <keithp@keithp.com>
14896 commit 71666409624bf544e8a55fa5ee91d2f8514a03ca
14897 Author: Keith Packard <keithp@keithp.com>
14898 Date: Mon Oct 7 21:49:55 2013 -0700
14900 Change differentiation filter constants and limits
14902 Larger limits avoids clipping legit data. Using the same filter time
14903 for both ascent and descent makes the results look a bit cleaner.
14905 Signed-off-by: Keith Packard <keithp@keithp.com>
14907 commit f6661cc015e1a92450dc3eede97d66005f69cc72
14908 Author: Bdale Garbee <bdale@gag.com>
14909 Date: Mon Oct 7 21:56:46 2013 -0600
14911 new toolchain for STM32L is in /usr/bin, not /opt/cortex/bin
14913 commit 8bd218854e968d2b9407489359be0c4a1aefd2c8
14914 Author: Keith Packard <keithp@keithp.com>
14915 Date: Thu Sep 19 00:29:25 2013 -0500
14917 altos: Set TeleMini v2.0 USB ID correctly
14921 Signed-off-by: Keith Packard <keithp@keithp.com>
14923 commit 3bf7ed1761e08d0cb43b0ed330226ec38c844591
14924 Author: Keith Packard <keithp@keithp.com>
14925 Date: Thu Sep 19 00:28:55 2013 -0500
14927 Add TeleMini v2.0 telemetry support
14929 Includes AltosLib and ao-telem
14931 Signed-off-by: Keith Packard <keithp@keithp.com>
14933 commit be7f56b86478ef4a23a2af77338c580b9c9e5e3b
14934 Author: Keith Packard <keithp@keithp.com>
14935 Date: Thu Sep 19 00:26:24 2013 -0500
14937 altoslib: Prefer averaged ground pres for ground alt computation
14939 If ground pressure is recorded (as from an eeprom file), then prefer
14940 that value to the average of the pre-boost ground pressures when
14941 computing the ground altitude.
14943 Signed-off-by: Keith Packard <keithp@keithp.com>
14945 commit 56b577e55c264c8e3152bb2b2cca02fa8836ac1e
14946 Author: Keith Packard <keithp@keithp.com>
14947 Date: Sun Sep 15 14:29:46 2013 -0700
14949 altos/telemetrum-v2.0: Use red LED during boot time
14951 If the LED is stuck on, then the board has failed to initialize,
14952 so use red instead of green as a warning indicator.
14954 Signed-off-by: Keith Packard <keithp@keithp.com>
14956 commit 1fa3ff9ba6d04303b3de6952675532492c85182f
14957 Author: Keith Packard <keithp@keithp.com>
14958 Date: Sun Sep 15 14:29:09 2013 -0700
14960 altos/telemini-v2.0: Change initialization order
14962 Make sure busses are running before devices are initialized
14964 Signed-off-by: Keith Packard <keithp@keithp.com>
14966 commit 0ff5f0fbc4900ad45bb7910ffc0c5a4e4cc4b857
14967 Author: Keith Packard <keithp@keithp.com>
14968 Date: Sun Sep 15 14:21:08 2013 -0700
14970 altos: Stop copying cc1111 binaries to the altos/src dir
14972 Just clutters up that directory.
14974 Signed-off-by: Keith Packard <keithp@keithp.com>
14976 commit b86c69d56261da54745076b1f5a9c8e8e44787c2
14977 Author: Keith Packard <keithp@keithp.com>
14978 Date: Sun Sep 15 14:13:59 2013 -0700
14980 altos: Add nanopeak-v0.1
14982 The same as micropeak, just a few different pins
14984 Signed-off-by: Keith Packard <keithp@keithp.com>
14986 commit 690094e2d7d9cfe5eb4edb478fd79e5d133c6b4b
14987 Author: Keith Packard <keithp@keithp.com>
14988 Date: Sun Sep 15 14:11:50 2013 -0700
14990 altos: Move micropeak sources around
14992 This sticks the micropeak sources in appropriate directories, rather
14993 than in the micropeak product directory so that they can be shared
14994 with future micropeak-style products.
14996 Signed-off-by: Keith Packard <keithp@keithp.com>
14998 commit 2449d123690746d0d0d5d66dfc4d3a05b9f5dc0c
14999 Author: Keith Packard <keithp@keithp.com>
15000 Date: Fri Sep 6 18:24:46 2013 -0700
15002 altosui: Include device name in Table view
15004 It's part of the telemetry, so we might as well display it
15006 Signed-off-by: Keith Packard <keithp@keithp.com>
15008 commit ae675c66594d366774d8f7f9c78f1236d3810eed
15009 Author: Keith Packard <keithp@keithp.com>
15010 Date: Fri Sep 6 18:23:06 2013 -0700
15012 altoslib: TeleMetrum v2 telemetry includes computes Pa/°C, not raw values
15014 Telemetry sends converted pressure/temp values as it doesn't include the
15015 MS5607 calibration data.
15017 Signed-off-by: Keith Packard <keithp@keithp.com>
15019 commit 4e22b34bde421a9df090c9196fd4347468c8176a
15020 Author: Keith Packard <keithp@keithp.com>
15021 Date: Fri Sep 6 16:54:07 2013 -0700
15023 altoslib: Add receiver serial to telem file names
15025 Makes it easy to record telemetry from multiple sites and compare them later.
15027 Signed-off-by: Keith Packard <keithp@keithp.com>
15029 commit 0ad95614685a73856bb26a94866909e5fc025434
15030 Author: Keith Packard <keithp@keithp.com>
15031 Date: Fri Sep 6 16:52:51 2013 -0700
15033 altosui: Set 'flight' value in AltosEepromMonitor window during download
15035 This feature was lost in the AltosState updates
15037 Signed-off-by: Keith Packard <keithp@keithp.com>
15039 commit b66e0d4c107a0727279d03d1d0e1e40a9eaaa3bc
15040 Author: Keith Packard <keithp@keithp.com>
15041 Date: Fri Sep 6 16:52:06 2013 -0700
15043 altosui: Load Telem files in AltosDataChooser too
15045 Telem file loading was stubbed out from AltosState changes
15047 Signed-off-by: Keith Packard <keithp@keithp.com>
15049 commit a1512255d20c8a395f30ed4914ddd3295842312b
15050 Author: Keith Packard <keithp@keithp.com>
15051 Date: Fri Sep 6 16:51:44 2013 -0700
15053 altoslib: Add TeleMini eeprom file to Makefile.am
15055 Signed-off-by: Keith Packard <keithp@keithp.com>
15057 commit 1e52d34137626ca756ea01f317ef7c359e464a5b
15058 Author: Keith Packard <keithp@keithp.com>
15059 Date: Fri Sep 6 16:50:46 2013 -0700
15061 altoslib: Lock access to AltosLink config_data
15063 Prevents multiple callers from trying to get config data at the same
15064 time and messing up the serial line
15066 Signed-off-by: Keith Packard <keithp@keithp.com>
15068 commit 29bb16397f14ed617ca3fbf48f2a7b726fd627d8
15069 Author: Keith Packard <keithp@keithp.com>
15070 Date: Fri Sep 6 16:49:36 2013 -0700
15072 altoslib: Set 'valid' for valid TeleMetrum eeprom download
15074 Had separate 'tick_valid' value, which wasn't useful as the supertype
15077 Signed-off-by: Keith Packard <keithp@keithp.com>
15079 commit a299a5a9a1b89c7ebc00ebd33a789793a6835181
15080 Author: Keith Packard <keithp@keithp.com>
15081 Date: Fri Sep 6 16:48:52 2013 -0700
15083 altoslib/altosui: Add TeleMini-v1.0 eeprom support
15085 Got lost in the AltosState transition
15087 Signed-off-by: Keith Packard <keithp@keithp.com>
15089 commit 82b3e3e4889aa5d4d157df1ad82e28068fda9e2a
15090 Author: Keith Packard <keithp@keithp.com>
15091 Date: Thu Sep 5 23:31:22 2013 -0700
15093 altosui: Remove debugging printf from InfoTable
15095 Signed-off-by: Keith Packard <keithp@keithp.com>
15097 commit 7f4650990e8a7cfcf8461e8928dfc426c9a563cc
15098 Author: Keith Packard <keithp@keithp.com>
15099 Date: Thu Sep 5 22:57:19 2013 -0700
15101 altos: Set tick value in new TeleMetrum v2 sensor packets
15103 Was getting left with the old value, which wasn't very useful
15105 Signed-off-by: Keith Packard <keithp@keithp.com>
15107 commit 7314bf807544eecf2fd970e93c752ff15688bb42
15108 Author: Keith Packard <keithp@keithp.com>
15109 Date: Thu Sep 5 22:56:57 2013 -0700
15111 ao-tools/ao-telem: Parse new TM v2 packets
15113 Signed-off-by: Keith Packard <keithp@keithp.com>
15115 commit ffdf82445817d1c97699f7de82534420b87d0ea7
15116 Author: Keith Packard <keithp@keithp.com>
15117 Date: Thu Sep 5 22:56:11 2013 -0700
15119 altosui: Fix 'Graph Flight' button in landed dialog
15121 Telemetry file reading was broken (oops!)
15123 Signed-off-by: Keith Packard <keithp@keithp.com>
15125 commit 0e3edacceb169326b8f5727bb5737d8238e9e40b
15126 Author: Keith Packard <keithp@keithp.com>
15127 Date: Thu Sep 5 22:55:43 2013 -0700
15129 altoslib: Remove debug printf from AltosTelemetryMetrumSensor
15131 Signed-off-by: Keith Packard <keithp@keithp.com>
15133 commit 59f0deff6d7bae22fb1b9a0649f3481b3d287d8e
15134 Author: Keith Packard <keithp@keithp.com>
15135 Date: Thu Sep 5 22:55:09 2013 -0700
15137 altoslib: Rewrite AltosTelemetryIterable
15139 Sort while reading instead of sorting separately.
15141 Signed-off-by: Keith Packard <keithp@keithp.com>
15143 commit effc62354fc82bb937c6f445a147fc92153a0731
15144 Author: Keith Packard <keithp@keithp.com>
15145 Date: Thu Sep 5 22:54:02 2013 -0700
15147 altoslib: Record time_change in AltosState correctly
15149 time_change is used to make real-time playback work.
15151 Signed-off-by: Keith Packard <keithp@keithp.com>
15153 commit b9ee58a7af839462680a0bdf1c1721017269986f
15154 Author: Keith Packard <keithp@keithp.com>
15155 Date: Thu Sep 5 22:53:14 2013 -0700
15157 altoslib: Update received time when replaying flights
15159 Received time is otherwise recorded as the time when the packets were
15160 read from the file, which doesn't work in real-time playback
15162 Signed-off-by: Keith Packard <keithp@keithp.com>
15164 commit e17e3691d93636eebbd7381f2df1303dc46ea96c
15165 Author: Keith Packard <keithp@keithp.com>
15166 Date: Thu Sep 5 22:52:22 2013 -0700
15168 altoslib: Only open log file when both flight and serial are known
15170 Some telemetry formats include serial and flight in different packets,
15171 so wait for both before creating the file
15173 Signed-off-by: Keith Packard <keithp@keithp.com>
15175 commit a9c495c7ca1e08b7ac76b0dab8b3bd9bd3a7edfc
15176 Author: Keith Packard <keithp@keithp.com>
15177 Date: Thu Sep 5 15:03:07 2013 -0700
15179 altoslib: Use AltosTelemetry.parse to pull telem lines apart
15181 Signed-off-by: Keith Packard <keithp@keithp.com>
15183 commit 9f017b4837b106e8c422955a95762f1bf3c78016
15184 Author: Keith Packard <keithp@keithp.com>
15185 Date: Thu Sep 5 15:02:47 2013 -0700
15187 altoslib: Remove more AltosRecord based files
15189 Signed-off-by: Keith Packard <keithp@keithp.com>
15191 commit 984515452f9ab56dad112d725469acfa54e2233b
15192 Author: Keith Packard <keithp@keithp.com>
15193 Date: Thu Sep 5 11:55:24 2013 -0700
15195 altoslib: remove AltosRecord based eeprom code
15197 Signed-off-by: Keith Packard <keithp@keithp.com>
15199 commit 3325df306933f080619f13ba1db45de484613d5a
15200 Author: Keith Packard <keithp@keithp.com>
15201 Date: Thu Sep 5 11:50:41 2013 -0700
15203 altoslib: Remove AltosRecord-based telemetry code
15205 All of this is now AltosState based
15207 Signed-off-by: Keith Packard <keithp@keithp.com>
15209 commit e9e9c6592c49109288a4e02e780b130fadb97db7
15210 Author: Mike Beattie <mike@ethernal.org>
15211 Date: Tue Sep 3 15:11:33 2013 +1200
15213 altosdroid: convert rogue files to unix line endings
15215 Signed-off-by: Mike Beattie <mike@ethernal.org>
15217 commit 93e66b4911b7285f9095712ef746571153c3f088
15218 Author: Mike Beattie <mike@ethernal.org>
15219 Date: Thu Sep 5 03:11:42 2013 +1200
15221 altosdroid: more updates for new AltosState
15223 Signed-off-by: Mike Beattie <mike@ethernal.org>
15226 altosdroid/src/org/altusmetrum/AltosDroid/AltosVoice.java
15228 commit ee14ad16c242e8bd7a9d33ebf569211d1490b8e1
15229 Author: Mike Beattie <mike@ethernal.org>
15230 Date: Tue Sep 3 15:10:23 2013 +1200
15232 altosdroid: update to support new state code
15234 Signed-off-by: Mike Beattie <mike@ethernal.org>
15237 altosdroid/src/org/altusmetrum/AltosDroid/TabAscent.java
15238 altosdroid/src/org/altusmetrum/AltosDroid/TabDescent.java
15239 altosdroid/src/org/altusmetrum/AltosDroid/TabPad.java
15241 commit 5b976a6651f4eb05d30afc08b9e1f27c7e52ae00
15242 Author: Keith Packard <keithp@keithp.com>
15243 Date: Thu Sep 5 11:33:48 2013 -0700
15245 altoslib: Finish AltosState changes. Update version number.
15247 Removes all of the AltosRecord bits, changes the monitor idle bits to
15248 have per-object state updaters.
15250 Signed-off-by: Keith Packard <keithp@keithp.com>
15252 commit b984ff81d6b8979574e0248ffe8876634b8e1942
15253 Author: Keith Packard <keithp@keithp.com>
15254 Date: Tue Sep 3 17:42:42 2013 -0600
15256 altoslib: Set measured acceleration for measured acceleration
15258 Was setting computed acceleration even for measured data
15260 Signed-off-by: Keith Packard <keithp@keithp.com>
15262 commit 96a651cc1b81b30f4cbde454e34cf80ed8825945
15263 Author: Keith Packard <keithp@keithp.com>
15264 Date: Tue Sep 3 17:42:00 2013 -0600
15266 altoslib: Clear sat data when tick changes
15268 Sat data comes in multiple records, but the tick is always the same,
15269 so use that to tell when the set of sats is new
15271 Signed-off-by: Keith Packard <keithp@keithp.com>
15273 commit 4de934c283a839fcbb246b36aa15362f3cf8629c
15274 Author: Keith Packard <keithp@keithp.com>
15275 Date: Tue Sep 3 17:41:12 2013 -0600
15277 altoslib: Start integrated value at 0 by default
15279 Check for MISSING and start at zero in that case
15281 Signed-off-by: Keith Packard <keithp@keithp.com>
15283 commit cfd8e4ebb3cb63937a71537095adb911d6211817
15284 Author: Keith Packard <keithp@keithp.com>
15285 Date: Tue Sep 3 17:40:04 2013 -0600
15287 altoslib: Use first few baro samples for ground pressure on TM
15289 TM didn't record the ground baro reading in the log file, so pull out
15290 the first few measured baro samples and use those instead.
15292 Signed-off-by: Keith Packard <keithp@keithp.com>
15294 commit 6ee99c1861ef1898a77aead41d80383e697bd248
15295 Author: Keith Packard <keithp@keithp.com>
15296 Date: Tue Sep 3 17:38:20 2013 -0600
15298 altoslib: Make Ascent/descent use different filter values. Always filter.
15300 In derivative code, use a shorter filter during ascent as the baro
15301 sensor is cleaner then. Then, make sure to always filter the values as
15302 the very first few baro samples can be noisy, which generates a bad
15305 Signed-off-by: Keith Packard <keithp@keithp.com>
15307 commit 70e67925cff98984d49fbc3f60e880c91e6d5079
15308 Author: Keith Packard <keithp@keithp.com>
15309 Date: Tue Sep 3 17:36:16 2013 -0600
15311 altoslib: Remove duplicate cmd/tick from TM eeprom file code
15313 Also replace tick setting with super call (which does that)
15315 Signed-off-by: Keith Packard <keithp@keithp.com>
15317 commit bc54014cfd4dbca67fa9db66e906ab8212a2eaa2
15318 Author: Keith Packard <keithp@keithp.com>
15319 Date: Tue Sep 3 17:35:23 2013 -0600
15321 altoslib: Clean up metrum eeprom file reading
15323 Spurious tick setting, fix some local variable names
15325 Signed-off-by: Keith Packard <keithp@keithp.com>
15327 commit d203a2da2641bec21a4257c8a7b03d9a1eba53a5
15328 Author: Keith Packard <keithp@keithp.com>
15329 Date: Tue Sep 3 17:34:41 2013 -0600
15331 altoslib: Correct mega/metrum eeprom years by adding 2000
15333 The files contain a single byte for year, which is always years since 2000.
15335 Signed-off-by: Keith Packard <keithp@keithp.com>
15337 commit 999c3c7866613e658a6c26374499bc516bbc944d
15338 Author: Keith Packard <keithp@keithp.com>
15339 Date: Tue Sep 3 17:32:37 2013 -0600
15341 altoslib: Correct tick wrapping in eeprom file reading
15343 Just need to signal that at least one record has been read to know
15344 when to start checking for wrap
15346 Signed-off-by: Keith Packard <keithp@keithp.com>
15348 commit 7d3af3d74f70a0933829be91ad3e3be04b1f1023
15349 Author: Keith Packard <keithp@keithp.com>
15350 Date: Tue Sep 3 17:31:58 2013 -0600
15352 altoslib: Ensure eeprom file body always exists
15354 Create an empty list of body elements if none were read from the file
15356 Signed-off-by: Keith Packard <keithp@keithp.com>
15358 commit 528e2e41112cad8a81bccbb89c3bd202b818a506
15359 Author: Keith Packard <keithp@keithp.com>
15360 Date: Mon Sep 2 23:10:23 2013 -0600
15362 altoslib: More AltosState hacking
15364 EasyMini graphs are looking good now.
15366 Signed-off-by: Keith Packard <keithp@keithp.com>
15368 commit 224a1e01bacb7db0076129906ed58e1c785e1b14
15369 Author: Keith Packard <keithp@keithp.com>
15370 Date: Mon Sep 2 23:08:34 2013 -0600
15372 altos: Not all products have pins to control flash loader
15374 TeleGPS has no exposed pins for this function
15376 Signed-off-by: Keith Packard <keithp@keithp.com>
15378 commit 77dc89ed5b7bf8f5b3fa3b6131660f1a98f583ea
15379 Author: Keith Packard <keithp@keithp.com>
15380 Date: Sat Aug 31 23:11:39 2013 -0500
15382 altoslib/altosui: Further AltosState transition work
15384 Parses most eeprom and telem records now; altosui updated to show from
15387 Signed-off-by: Keith Packard <keithp@keithp.com>
15389 commit c781469ff907a32bd43a5d781391b6859b14cd32
15390 Author: Keith Packard <keithp@keithp.com>
15391 Date: Sat Aug 31 23:10:56 2013 -0500
15393 altos/telegps: Initialize logging system
15395 Otherwise, very little logging works
15397 Signed-off-by: Keith Packard <keithp@keithp.com>
15399 commit 7ec1b97d278c7aec3199fb7270f0dcf9484c879f
15400 Merge: 017ed54 4188153
15401 Author: Keith Packard <keithp@keithp.com>
15402 Date: Sat Aug 31 08:22:09 2013 -0500
15404 Merge branch 'master' into new-state
15406 commit 4188153548fca104bb49cda2d502c708fe4b49d7
15407 Author: Keith Packard <keithp@keithp.com>
15408 Date: Sat Aug 31 08:20:48 2013 -0500
15410 altos/lpc: Add bits for building flash loaders
15412 Signed-off-by: Keith Packard <keithp@keithp.com>
15414 commit 017ed54ff69ef2f7740ea2578e22bf72e88deafb
15415 Author: Keith Packard <keithp@keithp.com>
15416 Date: Sat Aug 31 08:19:28 2013 -0500
15418 altoslib/altosui: Fixes for state changes
15420 Format for gps alt (now double).
15421 Use new code for csv file loading.
15423 Signed-off-by: Keith Packard <keithp@keithp.com>
15425 commit f07f6d55edf5b97020680b3ce1d9e00bb3df64a6
15426 Author: Keith Packard <keithp@keithp.com>
15427 Date: Sat Aug 31 01:48:02 2013 -0500
15429 altoslib/altosui: Get legacy telem working with new AltosState structure
15431 Make AltosTelemetry work without AltosRecord
15433 Signed-off-by: Keith Packard <keithp@keithp.com>
15435 commit de8d9c5630ae46378c50faf97f7d2e97fe139e30
15436 Author: Keith Packard <keithp@keithp.com>
15437 Date: Thu Aug 29 19:24:51 2013 -0500
15439 altoslib, altosui: Restructured state management now does TM eeprom files
15441 Removed uses of AltosRecord from AltosState, now just need to rewrite
15442 the other AltosState changing code to match
15444 Signed-off-by: Keith Packard <keithp@keithp.com>
15446 commit ce1378385ef273010498e81c205f42d8e32c7dc1
15447 Author: Keith Packard <keithp@keithp.com>
15448 Date: Thu Aug 29 19:22:18 2013 -0500
15450 altos: Split EasyMini and TeleMini log formats
15452 Same data, but EasyMini uses a 3.0V supply while TeleMini uses 3.3V,
15453 which changes the intepretation of all of the ADC values
15455 Signed-off-by: Keith Packard <keithp@keithp.com>
15457 commit 04d7d0f829ba953ffeca8ad9887a4b6b2b5d5087
15458 Author: Keith Packard <keithp@keithp.com>
15459 Date: Tue Aug 27 21:28:07 2013 -0600
15461 altoslib: Start restructuring AltosState harder
15463 Make per-packet code update state itself rather than having all state
15464 updates done centrally. Will make adding new packet types easier.
15466 Signed-off-by: Keith Packard <keithp@keithp.com>
15468 commit dcc51bb18985c24fa35bce0dd42ea3d847b960bf
15469 Merge: 7c82acc a73b025
15470 Author: Keith Packard <keithp@keithp.com>
15471 Date: Wed Aug 28 22:52:58 2013 -0600
15473 Merge remote-tracking branch 'origin/telemini'
15475 Signed-off-by: Keith Packard <keithp@keithp.com>
15478 src/core/ao_telemetry.c
15479 src/core/ao_telemetry.h
15481 Added both Mini and Metrum telemetry defines
15483 commit 7c82acc1c1c5b7b4da7c7ecb3b2fd90140e4c703
15484 Author: Keith Packard <keithp@keithp.com>
15485 Date: Wed Aug 28 22:12:25 2013 -0600
15487 altos/stm: Make sure we switch to MSI during timer init
15489 Need to ensure that the CPU is actually using the MSI during timer
15490 init or all of the other clock changes won't work
15492 Signed-off-by: Keith Packard <keithp@keithp.com>
15494 commit 6802b6a65b1fec06c2c873282be792c40b3c8f5e
15495 Author: Keith Packard <keithp@keithp.com>
15496 Date: Wed Aug 28 22:10:58 2013 -0600
15498 altos/stm: Remove stale timer defines
15500 Stuff from when we weren't using systick
15502 Signed-off-by: Keith Packard <keithp@keithp.com>
15504 commit 8e9ed70f50e3f535c2580820771bb1bc3cd055fe
15505 Author: Keith Packard <keithp@keithp.com>
15506 Date: Wed Aug 28 22:08:51 2013 -0600
15508 altos/stm: Make sampling profiler work again
15510 Disable the separate stack as that means we can't figure out the PC
15511 from the timer interrupt. Move ao_idle_loc after the interrupt release
15512 so that we see idle tasks correctly.
15514 Signed-off-by: Keith Packard <keithp@keithp.com>
15516 commit 2fa87754c5c11bb86e9b1878580c3d4f4b2463f5
15517 Author: Keith Packard <keithp@keithp.com>
15518 Date: Wed Aug 28 22:08:04 2013 -0600
15520 altos/stm: New compiler doesn't correctly build flash bits yet
15522 Use /opt/cortex until we make the packaged one work
15524 Signed-off-by: Keith Packard <keithp@keithp.com>
15526 commit 4887af0bf90661a3fdca76f1797a704888edab06
15527 Author: Keith Packard <keithp@keithp.com>
15528 Date: Wed Aug 28 22:04:18 2013 -0600
15530 altos: Force u-blox to 9600 baud for now
15532 The Max-7 parts just aren't happy switching baud rates, managing only
15533 about half the time. Someday I'll figure out why, but until then, make
15534 things work by just leaving the chips at 9600 baud
15536 Signed-off-by: Keith Packard <keithp@keithp.com>
15538 commit 61163980f096d555a843e25cd9fe1aec93bbbbba
15539 Author: Keith Packard <keithp@keithp.com>
15540 Date: Wed Aug 28 22:02:48 2013 -0600
15542 altos: Add debugging to ublox GPS driver
15544 The new max 7 parts seem to be unhappy about switching baud rates, so
15545 I've added a pile of debugging to help out. Some day, I'll figure out
15546 how to make them work, this code is being left in place to help with that.
15548 Signed-off-by: Keith Packard <keithp@keithp.com>
15550 commit 44d4c66b21d6b5a0c656fdff6d01ef1d125c1101
15551 Author: Keith Packard <keithp@keithp.com>
15552 Date: Wed Aug 28 21:54:31 2013 -0600
15554 altos: Update time for next alarm each time a task is added
15556 Adding a task with a sooner timeout than existing alarm tasks was not
15557 correctly updating the time to fire the next alarm, causing tasks to
15558 be delayed by the wrong amount.
15560 Signed-off-by: Keith Packard <keithp@keithp.com>
15562 commit 39475c7b8da4f29936f73ffa2bff112f50ee9328
15563 Author: Keith Packard <keithp@keithp.com>
15564 Date: Wed Aug 28 21:52:29 2013 -0600
15566 altos: TM v2 places the MMA6555 upside down compared to Tmega
15568 Means we need to invert the data coming out to make it work
15570 Signed-off-by: Keith Packard <keithp@keithp.com>
15572 commit f222e8504bfd01027e3c380c239a2cde2c367d74
15573 Author: Keith Packard <keithp@keithp.com>
15574 Date: Tue Aug 27 22:00:29 2013 -0600
15576 altos/telemetrum-v2.0: Use 9600 baud for ublox
15578 Something is up with the Max 7
15580 Signed-off-by: Keith Packard <keithp@keithp.com>
15582 commit abde595116f6e8b60ec9ce81554c05de11fd456e
15583 Author: Keith Packard <keithp@keithp.com>
15584 Date: Tue Aug 27 21:36:02 2013 -0600
15586 altos/telemetrum-v2.0: Fix MMA6555 SPI pin assignment
15588 For TM v2.0, it's on PB 3-5, not PE13-15
15590 Signed-off-by: Keith Packard <keithp@keithp.com>
15592 commit 454a41359b94e9bcf8582420abc359bbab9d8176
15593 Author: Keith Packard <keithp@keithp.com>
15594 Date: Fri Aug 23 11:25:56 2013 -0700
15596 altos: Rename TeleMetrum v2.0 ADC sense members
15598 Use sense_a and sense_m instead of sense[2]
15600 Signed-off-by: Keith Packard <keithp@keithp.com>
15602 commit 6aade70be0a7669d65a8606753d21e4eef5592cd
15603 Author: Keith Packard <keithp@keithp.com>
15604 Date: Tue Aug 20 14:20:56 2013 -0700
15606 altos: Add TeleMetrum v2.0 boot loader
15608 Signed-off-by: Keith Packard <keithp@keithp.com>
15610 commit 7b0f9b25a56fa8b4aa1c2e9d79c43e6a97cab0c0
15611 Author: Keith Packard <keithp@keithp.com>
15612 Date: Tue Aug 20 11:40:17 2013 -0700
15614 altos: Initial TeleMetrum v2.0 bits
15616 Adds new telemetry and logging formats along with code for TeleMetrum
15619 Signed-off-by: Keith Packard <keithp@keithp.com>
15621 commit a73b02518fcbc9fc0807ed8e141d3a06e8ad8214
15622 Author: Keith Packard <keithp@keithp.com>
15623 Date: Mon Aug 26 18:46:02 2013 -0700
15625 altos: Don't use ao_data on cc1111 projects
15627 cc1111 ao_adc.c supplies the needed globals at this point, and linking
15628 both into the program leads to two different versions of each at
15629 different addresses (yay SDCC linker!)
15631 Signed-off-by: Keith Packard <keithp@keithp.com>
15633 commit d54156caf856ab5570f050692b333a2c5d991265
15634 Author: Keith Packard <keithp@keithp.com>
15635 Date: Mon Aug 26 18:44:23 2013 -0700
15637 altos: Make ao_wakeup reentrant
15639 In case we end up invoking it from two places at once.
15641 Signed-off-by: Keith Packard <keithp@keithp.com>
15643 commit 7e941695aa27e5eaf453ca1128b8d835472410a4
15644 Author: Keith Packard <keithp@keithp.com>
15645 Date: Mon Aug 26 18:43:20 2013 -0700
15647 altos: Check for MS5607 MISO low before sleeping
15649 If the MISO line goes low before we manage to configure the
15650 interrupts, we'll miss it entirely unless we check the pin explicitly.
15652 Signed-off-by: Keith Packard <keithp@keithp.com>
15654 commit 9b9acb88aa97e8565cdf9342fc59a5aee08e3d34
15655 Author: Keith Packard <keithp@keithp.com>
15656 Date: Mon Aug 26 17:18:57 2013 -0700
15658 altos/telemini-v2.0: Add ao_exti.h depend. Init beeper and usb.
15660 Signed-off-by: Keith Packard <keithp@keithp.com>
15662 commit 7274b77666df9d2cab2854ec1a403d80e5fce73b
15663 Author: Keith Packard <keithp@keithp.com>
15664 Date: Mon Aug 26 17:18:17 2013 -0700
15666 altos: Use %ld and %lu for MS5607 debug output
15668 The value are 'long', so use the right printf format.
15670 Signed-off-by: Keith Packard <keithp@keithp.com>
15672 commit 4e3955a5b0ac125bd807920c467f959618449fbc
15673 Author: Keith Packard <keithp@keithp.com>
15674 Date: Mon Aug 26 17:17:47 2013 -0700
15676 altos/cc1111: Wake up non-ADC sensor code each timer tick
15678 Make sure the MS5607 code gets told to sample every tick
15680 Signed-off-by: Keith Packard <keithp@keithp.com>
15682 commit 3b2f83a7d686b5fbc0aaa56d48cb734f353631c8
15683 Author: Keith Packard <keithp@keithp.com>
15684 Date: Mon Aug 26 17:16:54 2013 -0700
15686 altos/cc1111: Leave pin interrupts completely disabled at init time
15688 Don't even turn in the PICTL bits as that seems to cause the chip to
15691 Signed-off-by: Keith Packard <keithp@keithp.com>
15693 commit 8ca98dc8c868c47c372d6b666c36e691fa402824
15694 Author: Keith Packard <keithp@keithp.com>
15695 Date: Mon Aug 26 17:15:55 2013 -0700
15697 altos: Get telemini to copy current MS5607 state to ring.
15699 The ADC code is responsible for actually inserting the non-ADC data
15700 into the ring, so do the copy there.
15702 Signed-off-by: Keith Packard <keithp@keithp.com>
15704 commit af9f9cf0c21630562c74fae41773319229bf44d3
15705 Author: Keith Packard <keithp@keithp.com>
15706 Date: Mon Aug 26 16:42:45 2013 -0700
15708 cc1111: Hacky pin interrupt support. Only useful for TeleMini v2
15710 This code is designed to support the MS5607 MISO interrupt bits.
15712 Signed-off-by: Keith Packard <keithp@keithp.com>
15714 commit 2380a4b9bd69629c78eec0a87ff8681a0524d8d2
15715 Author: Keith Packard <keithp@keithp.com>
15716 Date: Mon Aug 26 16:41:33 2013 -0700
15718 cc1111: Rework ADC configuration a bit, fix Tm V2 ADC usage
15720 The Tm v2 ADC code was not actually fetching and storing the ADC
15723 Signed-off-by: Keith Packard <keithp@keithp.com>
15725 commit aeb1c8a2aa533cb2805f0dbe848e098c8cae2b39
15726 Author: Keith Packard <keithp@keithp.com>
15727 Date: Mon Aug 26 16:39:47 2013 -0700
15729 ao-tools: Use TeleDongle for default ao-dbg target
15731 Makes more sense than assuming we're still using the old TI developer board.
15733 Signed-off-by: Keith Packard <keithp@keithp.com>
15735 commit 377a44cbfd5c8a659d2fecabb154726717a41900
15736 Author: Keith Packard <keithp@keithp.com>
15737 Date: Sun Aug 25 22:34:09 2013 -0700
15739 altos: Build more products by default
15741 We keep creating more hardware...
15743 Signed-off-by: Keith Packard <keithp@keithp.com>
15745 commit e72147e215a982ce701099626424b9a856ac9d09
15746 Author: Keith Packard <keithp@keithp.com>
15747 Date: Sun Aug 25 22:33:30 2013 -0700
15749 altos: Changes required by cc1111 multi-spi support
15751 These drivers got missed
15753 Signed-off-by: Keith Packard <keithp@keithp.com>
15755 commit af6f4205b00669af40acffc528cc8093b0236cf6
15756 Author: Keith Packard <keithp@keithp.com>
15757 Date: Sun Aug 25 22:29:46 2013 -0700
15759 Bump version to 1.2.9.2
15761 Set version for Airfest testing
15763 Signed-off-by: Keith Packard <keithp@keithp.com>
15765 commit 312f6194a4bc75473cb0d61a6d58b66fb1f7c068
15766 Author: Keith Packard <keithp@keithp.com>
15767 Date: Wed Jun 12 00:43:31 2013 -0700
15769 altos/teletiny-v2.0: Support multiple SPI busses on CC1111
15771 Needed for TeleMini v2.0
15773 Signed-off-by: Keith Packard <keithp@keithp.com>
15775 commit 2c2bbfd9a1a4b9de42cf566f21f179ff5ede0419
15776 Author: Keith Packard <keithp@keithp.com>
15777 Date: Thu May 23 16:52:59 2013 -0600
15779 altos: Add exti and spi to telemini-v2.0
15781 No longer builds like this
15783 Signed-off-by: Keith Packard <keithp@keithp.com>
15785 commit 56911f27376b0fe91a464e369bb8aa1531b3c7dc
15786 Author: Keith Packard <keithp@keithp.com>
15787 Date: Thu May 23 02:17:51 2013 -0600
15789 altos: Make TeleMini v2.0 fit
15791 Mash lots of storage locations and code around to shrink stuff down to size
15793 Signed-off-by: Keith Packard <keithp@keithp.com>
15795 commit cb844328322fd7d9f4dafb58b322257a70b347e6
15796 Author: Keith Packard <keithp@keithp.com>
15797 Date: Wed May 22 19:20:54 2013 -0600
15799 altos: Add 64-bit subtraction
15801 Signed-off-by: Keith Packard <keithp@keithp.com>
15803 commit 5ccd902d0fd2adc40c72982babb60fac4da6a087
15804 Author: Keith Packard <keithp@keithp.com>
15805 Date: Wed May 22 17:08:55 2013 -0700
15807 altos: Add 64x64 multiply. Test 64 ops for dest same as either source
15809 The test change is to ensure that the destination may be one of the 64
15812 Signed-off-by: Keith Packard <keithp@keithp.com>
15814 commit f7602ae566a5cbf2d2cbb1d68bad7e2d1177a33a
15815 Author: Keith Packard <keithp@keithp.com>
15816 Date: Wed May 22 14:38:19 2013 -0700
15818 altos: Make 64x16 mul a bit faster
15820 the unsigned 32x32 multiply really does work, just use it
15822 Signed-off-by: Keith Packard <keithp@keithp.com>
15824 commit 3114baef45803250a2e5cdd2ee4a9171f2045b0c
15825 Author: Keith Packard <keithp@keithp.com>
15826 Date: Wed May 22 14:32:50 2013 -0700
15828 altos: Add 64-bit add/mul/shift for SDCC
15830 SDCC doeesn't provide a native 64-bit type (sigh), so
15831 implement the minimal operations necessary for the MS5607 conversion
15834 Signed-off-by: Keith Packard <keithp@keithp.com>
15836 commit d0b4e926ecececa7499a301b6135189be119512e
15837 Author: Keith Packard <keithp@keithp.com>
15838 Date: Wed May 22 13:03:06 2013 -0700
15840 Initial TeleMini bits
15842 Signed-off-by: Keith Packard <keithp@keithp.com>
15844 commit 3ded57394f6dfd7beb9526c031a5c6c6c9926917
15845 Author: Keith Packard <keithp@keithp.com>
15846 Date: Sun Aug 25 22:22:55 2013 -0700
15848 altos: Explicitly list the linker script needed for AVR targets.
15850 Something changed in the binutils-avr package which makes the linker
15851 fail to find the script in the default location.
15853 Signed-off-by: Keith Packard <keithp@keithp.com>
15855 commit 203951f6e049ec7e95489849a2bfaa01aa19c0c9
15856 Merge: 4babe73 b363a62
15857 Author: Keith Packard <keithp@keithp.com>
15858 Date: Sun Aug 25 22:00:27 2013 -0700
15860 Merge branch 'master' into telegps-v0.3
15862 commit b363a628fc6137c3395a48ef13de7a799ec3e2c3
15863 Author: Keith Packard <keithp@keithp.com>
15864 Date: Wed May 22 19:31:15 2013 -0600
15866 altos: MS5607 pressure computation for low temperatures was wrong
15868 Second correction only applies to temps < -15°C, not 15°C.
15870 Signed-off-by: Keith Packard <keithp@keithp.com>
15872 commit aa2948803d33dbee6f1eab30370178252df2b56d
15873 Author: Keith Packard <keithp@keithp.com>
15874 Date: Sat Aug 17 17:45:06 2013 +0200
15876 altos: Wake up on LPC usart ISR only once
15878 Instead of waking up after every character, wait until the FIFO is
15879 empty to reduce overhead
15881 Signed-off-by: Keith Packard <keithp@keithp.com>
15883 commit 10f88c46df9a266f62452dc25275c79a3bb0653d
15884 Author: Keith Packard <keithp@keithp.com>
15885 Date: Sat Aug 17 17:43:18 2013 +0200
15887 altos: Set default LPC stack to 512 bytes, Em to 384 bytes
15889 The default for lpc has been raised to 512 bytes, but Em doesn't have
15890 enough RAM for that.
15892 Signed-off-by: Keith Packard <keithp@keithp.com>
15894 commit 41428d1e1e44a17eea5fda2b34cabafbdebf1464
15895 Author: Keith Packard <keithp@keithp.com>
15896 Date: Sat Aug 17 17:35:08 2013 +0200
15898 altosdroid: Add note to report TeleBT battery level
15900 Signed-off-by: Keith Packard <keithp@keithp.com>
15902 commit e908eb090fc2aaa03b35dc37c3e008b05ad44d80
15903 Author: Keith Packard <keithp@keithp.com>
15904 Date: Fri Aug 23 11:24:18 2013 -0700
15906 altos: Use installed arm compiler for LPC
15908 Signed-off-by: Keith Packard <keithp@keithp.com>
15910 commit 1aed2eb5c7d477a2f3d4fada22980041aba97cb8
15911 Author: Keith Packard <keithp@keithp.com>
15912 Date: Fri Aug 23 11:22:10 2013 -0700
15914 altos/lpc: Stop using burst mode for LPC ADC
15916 Burst mode doesn't stop after one round of conversions, so we end up
15917 getting incorrect values in whatever the last conversion register is.
15919 Just use single conversions and take an interrupt per channel.
15921 Also, slow down the ADC so that our values are more stable -- just
15922 need to make sure we get the whole conversion sequence done 100 times
15925 Signed-off-by: Keith Packard <keithp@keithp.com>
15927 commit 4babe7310f78338ca36ab9d31ac833eada27485f
15928 Author: Keith Packard <keithp@keithp.com>
15929 Date: Sat Aug 24 23:22:18 2013 -0700
15931 altos: Allow products to disable RDF entirely
15933 TeleGPS doesn't ever want RDF
15935 Signed-off-by: Keith Packard <keithp@keithp.com>
15937 commit a1ec15f4585e23eb67affbe7d9d97261576b198d
15938 Author: Keith Packard <keithp@keithp.com>
15939 Date: Sat Aug 24 23:21:53 2013 -0700
15941 altos: Add telegps v0.3 product
15943 Signed-off-by: Keith Packard <keithp@keithp.com>
15945 commit e2f385946132690ca6dc141d7c7830ae0cfe3458
15946 Author: Keith Packard <keithp@keithp.com>
15947 Date: Tue Aug 20 08:54:44 2013 -0700
15949 altos: various cc115l driver hacks
15951 Try to recover from TX_FIFO_UNDERFLOW by resetting the chip at idle
15954 Do a calibration phase during setup.
15956 Program power to ramp up to limit key down noise.
15958 Signed-off-by: Keith Packard <keithp@keithp.com>
15960 commit 0dd55f66d79f54b450fd8122aecd84d68b810bf4
15961 Author: Keith Packard <keithp@keithp.com>
15962 Date: Sat Aug 17 17:45:06 2013 +0200
15964 altos: Wake up on LPC usart ISR only once
15966 Instead of waking up after every character, wait until the FIFO is
15967 empty to reduce overhead
15969 Signed-off-by: Keith Packard <keithp@keithp.com>
15971 commit a0dd93ccf0920260b41c4003955617fd0cd1c8b4
15972 Author: Keith Packard <keithp@keithp.com>
15973 Date: Sat Aug 17 17:43:18 2013 +0200
15975 altos: Set default LPC stack to 512 bytes, Em to 384 bytes
15977 The default for lpc has been raised to 512 bytes, but Em doesn't have
15978 enough RAM for that.
15980 Signed-off-by: Keith Packard <keithp@keithp.com>
15982 commit 9a22a300009679a14d66214a5d61e9e6a177279f
15983 Author: Keith Packard <keithp@keithp.com>
15984 Date: Sat Aug 17 17:40:33 2013 +0200
15986 altos: Allow ublox to run at other baud rates
15988 Provides a configuration option to set the ublox serial baud rate to
15989 something other than 57600 baud
15991 Signed-off-by: Keith Packard <keithp@keithp.com>
15993 commit e0a0a747624c2df66ca4a73b5a0de014ea204dca
15994 Author: Keith Packard <keithp@keithp.com>
15995 Date: Sat Aug 17 17:36:35 2013 +0200
15997 altos: allow projects to override default config values
15999 Override default radio power and APRS interval
16001 Signed-off-by: Keith Packard <keithp@keithp.com>
16003 commit bed68ef5a6999b2e23853958502a689a7dbc15b3
16004 Author: Keith Packard <keithp@keithp.com>
16005 Date: Sat Aug 17 17:35:08 2013 +0200
16007 altosdroid: Add note to report TeleBT battery level
16009 Signed-off-by: Keith Packard <keithp@keithp.com>
16011 commit f0e126251360f050b7121f167771c057bda8747e
16012 Merge: d95a2c5 4fe47ad
16013 Author: Keith Packard <keithp@keithp.com>
16014 Date: Sat Aug 17 17:33:31 2013 +0200
16016 Merge branch 'master' into telegps-v0.3
16018 commit 4fe47adc7aca54951a50b1c1ae95cb02e46f8d3d
16019 Author: Keith Packard <keithp@keithp.com>
16020 Date: Sat Aug 17 17:30:52 2013 +0200
16022 altosui: AltosDbm class was missing somehow
16024 This doesn't appear to have been added?
16026 Signed-off-by: Keith Packard <keithp@keithp.com>
16028 commit 4ff54bb96f6c00c0c2c7dd32f81403bac331621a
16029 Merge: fa0859a 01f8df0
16030 Author: Keith Packard <keithp@keithp.com>
16031 Date: Sat Aug 17 16:03:26 2013 +0200
16033 Merge remote-tracking branch 'origin/master'
16035 commit fa0859a51576efe231effcb5995f325f9e7e0fcb
16036 Author: Keith Packard <keithp@keithp.com>
16037 Date: Sat Aug 17 16:01:44 2013 +0200
16039 altos: Make FAT test program link explicitly against libcrypto
16041 For some reason, the MD5_Final symbol isn't resolved when linking only
16044 Signed-off-by: Keith Packard <keithp@keithp.com>
16046 commit 01f8df088759ee7e6bc3900a013e0ea4fafaf984
16047 Merge: e2ebe60 15063cb
16048 Author: Bdale Garbee <bdale@gag.com>
16049 Date: Tue Jul 30 00:15:06 2013 -0600
16051 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
16053 commit e2ebe60adf061479a1259a5c68b9cd5f5bacf644
16054 Author: Bdale Garbee <bdale@gag.com>
16055 Date: Tue Jul 30 00:14:41 2013 -0600
16057 add a note about callsign matching and case sensitivity to the manual
16059 commit d95a2c5d1ddce913dcb1d1ab5dc59f6a588ab599
16060 Author: Keith Packard <keithp@keithp.com>
16061 Date: Mon Jun 24 14:29:43 2013 -0700
16063 altos: Remove ao_radio_gpio_bits from normal build
16065 Only needed for the CC115L_TRACE code, and it only builds on STM
16067 Signed-off-by: Keith Packard <keithp@keithp.com>
16069 commit c542a2ed0f222bd0ec84e4a9651585d441dd7ccf
16070 Author: Keith Packard <keithp@keithp.com>
16071 Date: Mon Jun 24 14:29:01 2013 -0700
16073 altos/lpc: Rename serial port to 'serial0'
16075 This lets existing serial port users find the right function.
16077 Signed-off-by: Keith Packard <keithp@keithp.com>
16079 commit 324ceea43c115f4bed3a5276e57559c6c76b07c1
16080 Author: Keith Packard <keithp@keithp.com>
16081 Date: Tue Jul 2 17:54:38 2013 -0700
16083 micropeak: Add Download button to menu bar
16085 It's the most common activity, after all
16087 Signed-off-by: Keith Packard <keithp@keithp.com>
16089 commit 156e60954fae15bc090984f79cd5594f910ca913
16090 Author: Keith Packard <keithp@keithp.com>
16091 Date: Tue Jul 2 17:53:51 2013 -0700
16093 altosdroid: Just use GPS location provider to build on 4.2
16095 Attempts to use the network provider cause the app to crash
16097 Signed-off-by: Keith Packard <keithp@keithp.com>
16099 commit e148582217d6e02ac90a68e2bb2532947378d36f
16100 Author: Keith Packard <keithp@keithp.com>
16101 Date: Mon Jun 24 14:28:06 2013 -0700
16103 altos: Support mega-style logging without ADC
16105 Used for TeleGPS, just exposes the necessary log writing function
16106 without also including the ADC writing code.
16108 Signed-off-by: Keith Packard <keithp@keithp.com>
16110 commit 261ec8fc7043e9314469e919aa96acc461f7e5f2
16111 Author: Keith Packard <keithp@keithp.com>
16112 Date: Mon Jun 24 14:26:23 2013 -0700
16114 altosui: Add EasyMini USB ids
16116 Signed-off-by: Keith Packard <keithp@keithp.com>
16118 commit 0dd148e388944d8d265da51d62806c4a00b2c13d
16119 Author: Keith Packard <keithp@keithp.com>
16120 Date: Mon Jun 24 14:23:53 2013 -0700
16122 altos/lpc: Add boot loader
16124 Support the USB boot loader, add USB pull-up support.
16126 Signed-off-by: Keith Packard <keithp@keithp.com>
16128 commit 2568b36ae9d38ae1607ec08b84b06e0fe84bd3ba
16129 Author: Keith Packard <keithp@keithp.com>
16130 Date: Sat Jun 22 00:53:38 2013 -0700
16132 altos/telefire-v0.1: Use same LED selection as the v0.2 setup
16134 Signed-off-by: Keith Packard <keithp@keithp.com>
16136 commit 58eda6f873f5d6e8e219f769bdf67ce4dbc96fd7
16137 Author: Keith Packard <keithp@keithp.com>
16138 Date: Fri Jun 21 19:40:59 2013 -0700
16140 altos/lpc: Don't disable all interrupts when disabling one interrupt
16142 The nvic iser and icer registers read value indicates all enabled
16143 interrupts, icer writes disable the set interrupts. Re-writing icer
16144 with the current value ends up disabling all interrupts, not exactly
16147 Signed-off-by: Keith Packard <keithp@keithp.com>
16149 commit 9081d881bc48bf7fdce617d300ac02c1a5962239
16150 Author: Keith Packard <keithp@keithp.com>
16151 Date: Fri Jun 21 19:40:03 2013 -0700
16153 altos/lpc: Remove ao_usb_task structure
16157 Signed-off-by: Keith Packard <keithp@keithp.com>
16159 commit 23f11b188fc6aacd29e7f01a7d8a40853b7655df
16160 Author: Keith Packard <keithp@keithp.com>
16161 Date: Fri Jun 21 19:39:27 2013 -0700
16163 altos/lpc: Enable brown-out-detector
16165 Make sure the processor does something sensible when the power disappears.
16167 Signed-off-by: Keith Packard <keithp@keithp.com>
16169 commit e9e713bc8ab2080d5c1c38570b112f13c886bd11
16170 Author: Keith Packard <keithp@keithp.com>
16171 Date: Wed Jun 19 22:45:54 2013 -0700
16173 altos/telefire: Radio status (no data, weak data, good data) on LEDs
16175 Instead of blinking RX/TX, report the radio status on the telefire
16176 nodes, just like telelco does. This makes the LEDs on telefire
16177 *exactly the same* as the LEDs on telelco, which seems like a good idea.
16179 Signed-off-by: Keith Packard <keithp@keithp.com>
16181 commit d90c2fa650de4cdb008d5e2559463c08da8db934
16182 Author: Keith Packard <keithp@keithp.com>
16183 Date: Wed Jun 19 22:44:16 2013 -0700
16185 altos: PCA9922 LED driver needs Enable driven low to latch values
16187 Driving Enable high means anything going past on the clock and data
16188 pair is reflected on the LEDs, which isn't terribly useful
16190 Signed-off-by: Keith Packard <keithp@keithp.com>
16192 commit 572faa19b9a496866e3b589d5eb9f37a680206ab
16193 Author: Keith Packard <keithp@keithp.com>
16194 Date: Wed Jun 19 22:42:58 2013 -0700
16196 altos/cc1111: Fetch RSSI for TeleFire from correct byte
16198 Reading the status byte doesn't provide very useful RSSI info
16200 Signed-off-by: Keith Packard <keithp@keithp.com>
16202 commit 025beb0fea011d0e3dab59b5d16e7ffae97c613c
16203 Author: Keith Packard <keithp@keithp.com>
16204 Date: Mon Jun 17 14:52:32 2013 -0700
16206 altos/lpc: Get rid of ADC filter
16208 Now that the source of the Vcc noise has been identified, remove the
16209 unnecessary ADC filtering.
16211 Signed-off-by: Keith Packard <keithp@keithp.com>
16213 commit 10f3d0084ff1c0b3dbf28c5d44727b514caeee20
16214 Author: Keith Packard <keithp@keithp.com>
16215 Date: Mon Jun 17 14:00:43 2013 -0700
16217 altosui: Add raw pressure to the AltosUI graph
16219 A nice addition, and useful when diagnosing baro sensor issues
16221 Signed-off-by: Keith Packard <keithp@keithp.com>
16223 commit 298e54856b5f8809b43f24407caa4a6be60822f3
16224 Author: Keith Packard <keithp@keithp.com>
16225 Date: Mon Jun 17 14:00:11 2013 -0700
16227 altos/lpc: Get the IRC turned off after boot time
16229 This involved carefully moving the USB away from the IRC before
16232 Signed-off-by: Keith Packard <keithp@keithp.com>
16234 commit b3ad488477def157e277e239e81f164b49725925
16235 Author: Keith Packard <keithp@keithp.com>
16236 Date: Mon Jun 17 13:58:41 2013 -0700
16238 altos: Disable USB on all flight computers when in flight mode
16240 There was a check to only disable USB on boards with radios, but for
16241 EasyMini, we want to disable USB too for flight mode.
16243 Signed-off-by: Keith Packard <keithp@keithp.com>
16245 commit 2e2f3f2556e714833d8b7d0f65877b07b3dc2cb5
16246 Author: Keith Packard <keithp@keithp.com>
16247 Date: Sun Jun 16 22:32:16 2013 -0700
16249 altos: Declare m25 write-in-progress as 'ao_port_t'
16251 This lets us use port bits greater than 7 for M25 chip selects
16253 Signed-off-by: Keith Packard <keithp@keithp.com>
16255 commit dcf769198863c1b0f1b05f41d0c052a3dbfef247
16256 Author: Keith Packard <keithp@keithp.com>
16257 Date: Sun Jun 16 22:31:58 2013 -0700
16259 altos/lpc: Remove spurious semicolon
16261 Signed-off-by: Keith Packard <keithp@keithp.com>
16263 commit d040adeef9df4cda31dce603db81dc7ce19ec0d1
16264 Author: Keith Packard <keithp@keithp.com>
16265 Date: Sun Jun 16 22:31:31 2013 -0700
16267 altos/lpc: Don't disable all of the clocks just yet, USB doesn't work
16269 Signed-off-by: Keith Packard <keithp@keithp.com>
16271 commit 1676c7dbc3dcce2962be9ef9a58d37c7b48e3c0f
16272 Author: Keith Packard <keithp@keithp.com>
16273 Date: Sun Jun 16 15:07:54 2013 -0700
16275 altos/lpc: Turn off more clocks, disable USART for easymini
16277 Try to reduce noise on the power supply.
16279 Signed-off-by: Keith Packard <keithp@keithp.com>
16281 commit be9ee9ed2d041c4ab4e77ee2010fe3c7a1ca6597
16282 Author: Keith Packard <keithp@keithp.com>
16283 Date: Sat Jun 15 01:20:49 2013 -0700
16285 altos/lpc: Filter ADC inputs
16287 They're amazingly noisy on EasyMini, so just filter them as the only
16288 thing we use them for is battery and pyro numbers.
16290 Signed-off-by: Keith Packard <keithp@keithp.com>
16292 commit 7361371190bf3805b6d0414e61f697aca7c7cff1
16293 Author: Keith Packard <keithp@keithp.com>
16294 Date: Fri Jun 14 04:38:11 2013 -0700
16296 altos/lpc: Make ADC inputs work
16298 They're still very unstable (bouncing around a lot), but at least they
16299 seem to report useful stuff now.
16301 Signed-off-by: Keith Packard <keithp@keithp.com>
16303 commit 6827d0a7c59d606ea05387465f1ad4d914babd49
16304 Author: Keith Packard <keithp@keithp.com>
16305 Date: Tue Jun 11 16:31:20 2013 -0700
16307 altosui: Use preferred units for main deployment height configuration
16309 Show and accept values in the preferred units; create a separate list
16310 of preferred values for each set of units
16312 Signed-off-by: Keith Packard <keithp@keithp.com>
16314 commit 15063cbb8f76bffea71575d295ca87b7ceca36d8
16315 Author: Keith Packard <keithp@keithp.com>
16316 Date: Sun Jun 9 23:18:09 2013 -0700
16318 altos/telelco: Add 30ms delay in search after finding a box
16320 This gives the remote boxes time to get back to listening for messages
16321 after receiving the packet from the found box.
16323 Signed-off-by: Keith Packard <keithp@keithp.com>
16325 commit 988924b51980ad43e39bc4785a625ff25eb16449
16326 Author: Keith Packard <keithp@keithp.com>
16327 Date: Sun Jun 9 22:09:13 2013 -0700
16329 altos: Add fast-timer API. Use for quadrature and button drivers
16331 This splits the fast-timer portion out of the debounce helper code and
16332 shares that with the quadrature driver which now uses it directly.
16334 Signed-off-by: Keith Packard <keithp@keithp.com>
16336 commit 72b6c699d355fcd41addb9919d846e63105b9db7
16337 Author: Keith Packard <keithp@keithp.com>
16338 Date: Mon May 13 22:34:19 2013 -0700
16340 altos: Add debounce helper. Use in button and quadrature drivers for TeleLCO
16342 Signed-off-by: Keith Packard <keithp@keithp.com>
16344 commit 47b7e1d819e48aaebf6ffda49effbee041ce8750
16345 Author: Keith Packard <keithp@keithp.com>
16346 Date: Sun Jun 9 12:13:06 2013 -0700
16348 altos/telefire: Leave siren on all the time. Add siren/strobe debugging.
16350 The 50% duty cycle wasn't actually loud enough outside.
16352 Signed-off-by: Keith Packard <keithp@keithp.com>
16354 commit 187f661c2512e4260d0ca64134de8fad199f5944
16355 Author: Keith Packard <keithp@keithp.com>
16356 Date: Sun Jun 9 10:00:54 2013 -0700
16358 altos: Add telefire v0.2 support
16360 Signed-off-by: Keith Packard <keithp@keithp.com>
16362 commit 8ba2035c78293bc312804722249df76dd4692d71
16363 Author: Keith Packard <keithp@keithp.com>
16364 Date: Sun Jun 9 09:53:07 2013 -0700
16366 altos: Add driver for 74hc165 shift register
16368 Just reads one byte from the shift register using the SPI driver and returns it
16370 Signed-off-by: Keith Packard <keithp@keithp.com>
16372 commit 3e8b72a9dc5b6c3a0f6132dc2dec04f8c08a1deb
16373 Author: Keith Packard <keithp@keithp.com>
16374 Date: Sun May 26 22:38:56 2013 -0600
16376 altos: Add pyro operations to regular ignite commands
16378 Instead of having separate commands, just mix the two sets together.
16380 Signed-off-by: Keith Packard <keithp@keithp.com>
16382 commit 4bc1f3390b9ebbe07af4bc0f0a1c0915193ddf42
16383 Author: Keith Packard <keithp@keithp.com>
16384 Date: Sun May 26 19:41:22 2013 -0600
16386 Set version to 1.2.9.1
16388 Mark bits to be used on Monday of NSL 2013
16390 Signed-off-by: Keith Packard <keithp@keithp.com>
16392 commit 6f131e740477d29b6623fa336da79e53f765a55b
16393 Author: Keith Packard <keithp@keithp.com>
16394 Date: Sun May 26 19:48:03 2013 -0600
16396 altos: Make manual pyro firing command work again
16398 Signed-off-by: Keith Packard <keithp@keithp.com>
16400 commit 5ca472333a3587f0e47d54f5edc287494262ef98
16401 Author: Keith Packard <keithp@keithp.com>
16402 Date: Sun May 26 19:47:02 2013 -0600
16404 altos: write pyro fired to correct log field
16406 Signed-off-by: Keith Packard <keithp@keithp.com>
16408 commit 956f4dff1cc521059434743624b1271fb92b96ae
16409 Author: Keith Packard <keithp@keithp.com>
16410 Date: Sun May 26 19:39:13 2013 -0600
16412 altos: Light pyro charges simultaneously if so configured
16414 Don't try to be nice to the battery, just let the pyro circuit deal
16415 with it and try to get all of the specified circuits going at the same
16416 time if they're configured to do so.
16418 Signed-off-by: Keith Packard <keithp@keithp.com>
16420 commit 62547a042d042fadec652c5081f96816a8e66970
16421 Author: Keith Packard <keithp@keithp.com>
16422 Date: Sun May 26 19:03:12 2013 -0600
16424 altos,altosui: Add pyro state logging for TeleMega
16426 Only in the log file (no obvious space in the telem packets), but at
16427 least we should be able to check for pyro failures.
16429 Signed-off-by: Keith Packard <keithp@keithp.com>
16431 commit 277577fecc71e3c52b823938f396cf42be403ebe
16432 Author: Keith Packard <keithp@keithp.com>
16433 Date: Sun May 26 19:01:58 2013 -0600
16435 altos: Add pyro code testing to ao_flight_test for TeleMega
16437 This parses the pyro settings and signals when the pyro channels are
16438 fired in the output.
16440 Signed-off-by: Keith Packard <keithp@keithp.com>
16442 commit b1408c13f176f3f021e9face48c4cd33528ee96c
16443 Author: Keith Packard <keithp@keithp.com>
16444 Date: Sun May 26 18:58:41 2013 -0600
16446 ao-tools/ao-mega: Dump 'pyro' state from mega log
16448 Signed-off-by: Keith Packard <keithp@keithp.com>
16450 commit 8083aa731c99d09bdd4a8c216bb11f846734d7df
16451 Author: Keith Packard <keithp@keithp.com>
16452 Date: Sun May 26 18:57:58 2013 -0600
16454 ao-tools: Add ao-mega tool to parse TeleMega eeprom files
16456 Signed-off-by: Keith Packard <keithp@keithp.com>
16458 commit 21689ef744ddf43965ccad89dc1133a905011d7f
16459 Author: Keith Packard <keithp@keithp.com>
16460 Date: Sun May 26 18:54:02 2013 -0600
16462 altosui: Missing 'break' after selecting 'mega' format detection
16464 Caused 'mega' logs to be dumped in 'mini' format which didn't work well.
16466 Signed-off-by: Keith Packard <keithp@keithp.com>
16468 commit 17e0ccccc8619f96d2cf56bd98d63a7e59f5301d
16469 Author: Keith Packard <keithp@keithp.com>
16470 Date: Sun May 26 18:50:10 2013 -0600
16472 altosui: Stop downloading mega eeprom on empty block
16474 Signed-off-by: Keith Packard <keithp@keithp.com>
16476 commit 013cba5ed1fde72240a68ec648bd14977f5e48a4
16477 Author: Keith Packard <keithp@keithp.com>
16478 Date: Mon May 20 21:41:01 2013 -0700
16480 doc: Update description of graph window to note new tabs (config and map)
16482 Signed-off-by: Keith Packard <keithp@keithp.com>
16484 commit e711c708b0d2c8d8c2d72e34a795ad8e9b5ab5de
16485 Author: Keith Packard <keithp@keithp.com>
16486 Date: Mon May 20 21:37:20 2013 -0700
16488 Create release notes for 1.2.1
16490 Move most of the 1.2 content to the 1.2.1 block
16492 Signed-off-by: Keith Packard <keithp@keithp.com>
16494 commit 2344ba81fa51215471099e56518112478bdf2e73
16495 Author: Keith Packard <keithp@keithp.com>
16496 Date: Tue May 21 11:31:05 2013 -0700
16498 Separate out cortex-m0 compiler tests in configure
16500 The summon arm toolchain doesn't work for cortex-m0 parts, but the
16501 linaro toolchain does. Look in /usr/bin for the -m0 compiler but
16502 continue to use /opt/cortex/bin for the -m3 compiler
16504 Signed-off-by: Keith Packard <keithp@keithp.com>
16506 commit 85eb75c3251d8e141d7269fc7ffa6197174ea8c3
16507 Author: Keith Packard <keithp@keithp.com>
16508 Date: Tue May 21 11:30:44 2013 -0700
16510 altos: Can't use inline functions because SDCC doesn't do that
16514 Signed-off-by: Keith Packard <keithp@keithp.com>
16516 commit fd5567882b732f8947b44b217552077c82a3d28e
16517 Merge: fd55c1f 57b4d82
16518 Author: Keith Packard <keithp@keithp.com>
16519 Date: Tue May 21 11:16:54 2013 -0700
16523 commit fd55c1fe53adf5c50dcd3ce8296f80871cec73e9
16524 Author: Keith Packard <keithp@keithp.com>
16525 Date: Tue May 21 11:16:33 2013 -0700
16527 Bump master version to 1.2.9 to avoid confusion with 1.2 releases
16529 Signed-off-by: Keith Packard <keithp@keithp.com>
16531 commit 1bffe8caf0294e9cfef2dab1c6b5a8d1d87ac3a2
16532 Author: Keith Packard <keithp@keithp.com>
16533 Date: Tue May 21 11:08:15 2013 -0700
16535 altos: Set the path for the STM32L compiler explicitly
16537 This makes sure we use the known toolchain for STM32L builds
16539 Signed-off-by: Keith Packard <keithp@keithp.com>
16541 commit 7282fab337dc48d32606276e5f51c057a3bff8cb
16542 Author: Keith Packard <keithp@keithp.com>
16543 Date: Tue May 21 11:04:25 2013 -0700
16545 altosui: Add TeleBT firmware to release
16547 Signed-off-by: Keith Packard <keithp@keithp.com>
16549 commit 57b4d82dee10b142b820aa306028a288a85214f6
16550 Author: Keith Packard <keithp@keithp.com>
16551 Date: Sun May 19 23:07:54 2013 -0700
16553 Add Mini logging format. Use in EasyMini
16555 This is a 16-byte record that includes all of the sensor data in each
16556 sensor record, along with records for flight state changes.
16558 Signed-off-by: Keith Packard <keithp@keithp.com>
16560 commit 27e9b93f3d35890a49575b2ead1983ce3c2fc213
16561 Merge: a4df257 d9cbef8
16562 Author: Keith Packard <keithp@keithp.com>
16563 Date: Sun May 19 20:40:42 2013 -0700
16565 Merge branch 'master' into lpc
16567 commit d9cbef8cd364aae54855cc5bc64fb8c2b22057b0
16568 Author: Keith Packard <keithp@keithp.com>
16569 Date: Sun May 19 20:35:42 2013 -0700
16571 altos/telemega: The last two igniters are apogee and main
16573 Not the first two. TeleMega v0.3 has these marked on the silk
16575 Signed-off-by: Keith Packard <keithp@keithp.com>
16577 commit a4df2575b4e782e83cc4e9b1d2e5cd2397a97dd8
16578 Author: Keith Packard <keithp@keithp.com>
16579 Date: Sun May 19 20:33:35 2013 -0700
16581 altos/easymini: Initialize beep and ADC. Declare use of igniter bits.
16583 This makes easymini actually work!
16585 Signed-off-by: Keith Packard <keithp@keithp.com>
16587 commit a87a8e8067d7b2d0ff3a3274af9f1e919b5b7793
16588 Author: Keith Packard <keithp@keithp.com>
16589 Date: Sun May 19 20:32:34 2013 -0700
16591 altos/easymini: Use different pins for igniter outputs
16593 Was using the I2C outputs which are open drain, which makes it
16594 impossible to force them high as needed to driver our igniters.
16596 Signed-off-by: Keith Packard <keithp@keithp.com>
16598 commit 16eb0b04df3d1db65bd40717133abe94db0f2a15
16599 Author: Keith Packard <keithp@keithp.com>
16600 Date: Sun May 19 20:31:48 2013 -0700
16602 altos/easymini: MS5607 chip select bits were defined wrong
16604 Signed-off-by: Keith Packard <keithp@keithp.com>
16606 commit 455802b7e853956180799c058e9561876d98d831
16607 Author: Keith Packard <keithp@keithp.com>
16608 Date: Sun May 19 20:30:49 2013 -0700
16610 altos/easymini: Easymini doesn't have USB connect or VBUS wiring
16612 Disable these in ao_pins.h
16614 Signed-off-by: Keith Packard <keithp@keithp.com>
16616 commit 35b120c4154df0351c3a802f86dda224a7643068
16617 Author: Keith Packard <keithp@keithp.com>
16618 Date: Sun May 19 20:27:53 2013 -0700
16620 altos/lpc: Force idle mode if USB gets an address during boot time
16622 This lets EasyMini be booted to idle mode by simply plugging it into USB.
16624 Signed-off-by: Keith Packard <keithp@keithp.com>
16626 commit c1f01cd4406063191a51cb68fc4634eabfc60fc2
16627 Author: Keith Packard <keithp@keithp.com>
16628 Date: Sun May 19 20:27:05 2013 -0700
16630 altos/lpc: Reset SPI device at startup time
16632 Wasn't doing the reset sequence correctly (write 0, then write 1).
16634 Signed-off-by: Keith Packard <keithp@keithp.com>
16636 commit e0ad8b5b5e1b4c7a9ffba9d25f3c32ce708c3ec5
16637 Author: Keith Packard <keithp@keithp.com>
16638 Date: Sun May 19 20:26:07 2013 -0700
16640 altos/lpc: Configuring wrong pin for SPI1 MOSI
16642 Was setting configuration for PIO1_21 instead of PIO0_21.
16644 Signed-off-by: Keith Packard <keithp@keithp.com>
16646 commit b9bb088a36fd351809f4c378356327ffa663c974
16647 Author: Keith Packard <keithp@keithp.com>
16648 Date: Sun May 19 20:25:13 2013 -0700
16650 altos/lpc: Allow for alternate SPI SCLK0 pin usage
16652 SPI SCLK0 can appear on three different pins; let the application
16653 configure which one it wants.
16655 Signed-off-by: Keith Packard <keithp@keithp.com>
16657 commit 397109139fb9ff27ec7cfb0cafa65d1dbea053bd
16658 Author: Keith Packard <keithp@keithp.com>
16659 Date: Sun May 19 20:24:11 2013 -0700
16661 altos/lpc: Leave SPI enabled all the time
16663 Might be able to turn it off with some care; more experimentation required.
16665 Signed-off-by: Keith Packard <keithp@keithp.com>
16667 commit e383d7a28d01729c50f933ceda77ea767d1b8087
16668 Author: Keith Packard <keithp@keithp.com>
16669 Date: Sun May 19 20:22:20 2013 -0700
16671 altos/lpc: Create TX/RX busy macros for SPI driver
16673 Check for both fifo status *and* device busy to make sure the device
16674 is idle before we touch any registers.
16676 Signed-off-by: Keith Packard <keithp@keithp.com>
16678 commit 07d261c08214837b5d5cac4d2be43e51a0c47868
16679 Author: Keith Packard <keithp@keithp.com>
16680 Date: Sun May 19 20:19:15 2013 -0700
16682 altos/lpc: Fix beeper driver
16684 Set prescale limit, not current prescale value (pr instead of pc).
16685 Flip output 1 on PWM match (set emc toggle for channel 1).
16686 Don't hold counter in reset (turn off CRST bit).
16688 Signed-off-by: Keith Packard <keithp@keithp.com>
16690 commit 3fe11b277dd7268eb445d120c8f9537f95148891
16691 Author: Keith Packard <keithp@keithp.com>
16692 Date: Sun May 19 20:18:44 2013 -0700
16694 altos/lpc: Missing parens around ao_gpio_set macro
16696 Signed-off-by: Keith Packard <keithp@keithp.com>
16698 commit a78012782c779de3433b91e6b854b2fdbd7230fd
16699 Author: Keith Packard <keithp@keithp.com>
16700 Date: Sun May 19 20:17:48 2013 -0700
16702 altos/lpc: SPI runs off main clock (48MHz), not sysclk (24MHz)
16704 Update SPI speed definitions to match
16706 Signed-off-by: Keith Packard <keithp@keithp.com>
16708 commit d51c9fda3478f205e4bcdf1b7bf21eb1e0a516bc
16709 Author: Keith Packard <keithp@keithp.com>
16710 Date: Sun May 19 20:07:52 2013 -0700
16712 altos/lpc: Pull ADC data from the correct registers
16714 Was just stepping through register space arbitrarily, which would have
16715 worked for EasyMini, but might have failed later if the ADC pin usage
16716 wasn't consecutive.
16718 Signed-off-by: Keith Packard <keithp@keithp.com>
16720 commit 6343bd774f542a4f915cf1fca2053d03e93bf2c3
16721 Author: Keith Packard <keithp@keithp.com>
16722 Date: Sun May 19 20:06:03 2013 -0700
16724 altos/lpc: Don't use loader to place USB endpoint data in USB ram
16726 Instead, just assign a fixed address in registers.ld. This avoids a
16727 confusing section in the elf file.
16729 Signed-off-by: Keith Packard <keithp@keithp.com>
16731 commit 35a05041d3ca3e69a146bd3bf8038c0f1cbc1b42
16732 Author: Keith Packard <keithp@keithp.com>
16733 Date: Sun May 19 20:04:29 2013 -0700
16735 altos: Add EXTI_PIN_NOCONFIGURE to exti interface, use for MS5607
16737 This asks the EXTI code to not mess with the pin configuration so that
16738 the MS5607 driver can get interrupts on the MISO pin while still using
16741 Signed-off-by: Keith Packard <keithp@keithp.com>
16743 commit 098fd43a740ee2a782f82b6b71965b60cdba2d62
16744 Author: Keith Packard <keithp@keithp.com>
16745 Date: Sun May 19 20:00:24 2013 -0700
16747 altos/lpc: Make EXTI code work.
16749 Clear rise/fall bits in ISR to avoid re-entering.
16750 Block interrupts around enable/disable bits.
16751 Create shared _ao_exti_set_enable function to control mask changes.
16753 Signed-off-by: Keith Packard <keithp@keithp.com>
16755 commit f794e6c95697b034be315632fddb3a5475c43b5b
16756 Author: Keith Packard <keithp@keithp.com>
16757 Date: Sun May 19 19:57:23 2013 -0700
16759 altos: Use ao_spi_get/put_bit in MS5607 driver
16761 Replace open-coded ao_spi_get/put and ao_gpio_set sequences
16763 Signed-off-by: Keith Packard <keithp@keithp.com>
16765 commit b7ab41e4dc92dcd382f4c05459088d8df8b70075
16766 Author: Keith Packard <keithp@keithp.com>
16767 Date: Sun May 19 19:51:32 2013 -0700
16769 altos/attiny: Fix ao_spi_get_bit/ao_spi_put_bit macros
16771 These were never written, so just use ao_spi_get/put_mask.
16773 A precursor to changing how the MS5607 drives the SPI bus
16775 Signed-off-by: Keith Packard <keithp@keithp.com>
16777 commit 49f9cdda5f1812687b82915acc78a9d9136255bf
16778 Author: Keith Packard <keithp@keithp.com>
16779 Date: Sat May 18 03:54:30 2013 -0700
16781 altos: ignore built files in easymini-v0.1
16783 Signed-off-by: Keith Packard <keithp@keithp.com>
16785 commit c57e1630002c921739ff22395497d93027d381b6
16786 Author: Keith Packard <keithp@keithp.com>
16787 Date: Sat May 18 03:53:32 2013 -0700
16789 altos: Build easymini-v0.1
16791 Signed-off-by: Keith Packard <keithp@keithp.com>
16793 commit 278300b2bc98b92cc71ec016ab0fc93eb3696435
16794 Author: Keith Packard <keithp@keithp.com>
16795 Date: Sat May 18 03:52:59 2013 -0700
16797 altos: Initialize SPI for easymini
16799 Doesn't work very well without this
16801 Signed-off-by: Keith Packard <keithp@keithp.com>
16803 commit cbe5eee76faf386eefe69539935ab318944ac452
16804 Author: Keith Packard <keithp@keithp.com>
16805 Date: Sat May 18 03:52:14 2013 -0700
16807 altos/lpc: Stick USB control structure in USB memory
16809 No reason to have that in regular ram, and it means we've got space
16810 for large enough stacks now
16812 Signed-off-by: Keith Packard <keithp@keithp.com>
16814 commit 3587bfd248e115bb1abb28f71b263575b4e8e367
16815 Author: Keith Packard <keithp@keithp.com>
16816 Date: Sat May 18 03:22:10 2013 -0700
16818 altos: Add easymini-v0.1 product
16820 Signed-off-by: Keith Packard <keithp@keithp.com>
16822 commit c4991db4809ae547fdb245e3cb42517fa7524de5
16823 Author: Keith Packard <keithp@keithp.com>
16824 Date: Sat May 18 03:21:43 2013 -0700
16826 altos/lpc: Use separate interrupt stack
16828 Signed-off-by: Keith Packard <keithp@keithp.com>
16830 commit 5311720525ac73e9d42067b68adf25fc2e054af5
16831 Author: Keith Packard <keithp@keithp.com>
16832 Date: Sat May 18 03:21:20 2013 -0700
16834 altos/lpc: Try a smaller stack.
16836 Signed-off-by: Keith Packard <keithp@keithp.com>
16838 commit f5218e2544dcb659aec6c3adee50d61cab1bba3a
16839 Author: Keith Packard <keithp@keithp.com>
16840 Date: Sat May 18 03:19:41 2013 -0700
16842 altos/lpc: Add pin interrupt driver
16844 Signed-off-by: Keith Packard <keithp@keithp.com>
16846 commit c0d0147251bfcebd753196b74c22c00c3116fd22
16847 Author: Keith Packard <keithp@keithp.com>
16848 Date: Sat May 18 03:18:55 2013 -0700
16850 altos/lpc: Add beep driver
16852 Hardwired to our current beeper pin
16854 Signed-off-by: Keith Packard <keithp@keithp.com>
16856 commit 166977c65bddb50d600a3c1e1f278c425b673697
16857 Author: Keith Packard <keithp@keithp.com>
16858 Date: Sat May 18 03:18:19 2013 -0700
16860 altos/lpc: Add ADC driver
16862 Uses burst mode to get the whole set of values in one interrupt
16864 Signed-off-by: Keith Packard <keithp@keithp.com>
16866 commit ed25a46571d988ccf37ae915dff97b5f00bcf9cf
16867 Author: Keith Packard <keithp@keithp.com>
16868 Date: Sat May 18 03:16:41 2013 -0700
16870 altos/lpc: add gpio int, spi, adc and ct32b defines to lpc.h
16874 Signed-off-by: Keith Packard <keithp@keithp.com>
16876 commit 2b0b7bf1462341718e582223a880f2dfcd79e2ad
16877 Author: Keith Packard <keithp@keithp.com>
16878 Date: Sat May 18 03:15:58 2013 -0700
16880 altos/lpc: Clean up broken IOCONF defines
16882 Missing comment closes
16884 Signed-off-by: Keith Packard <keithp@keithp.com>
16886 commit 08887678f900adae81dcb1a7f5353d98d127aafd
16887 Author: Keith Packard <keithp@keithp.com>
16888 Date: Sat May 18 03:14:57 2013 -0700
16890 altos/lpc: Fix ao_enable_input, add ao_enable_analog
16892 Signed-off-by: Keith Packard <keithp@keithp.com>
16894 commit 15ca452b60271e3a0f7327216df04eef5b985240
16895 Author: Keith Packard <keithp@keithp.com>
16896 Date: Sat May 18 03:14:16 2013 -0700
16898 altos: LPC interrupt priorities are just 0-3
16900 Signed-off-by: Keith Packard <keithp@keithp.com>
16902 commit 935a7ff38010ec4ad19f315f8a2a1557c01ae554
16903 Author: Keith Packard <keithp@keithp.com>
16904 Date: Sat May 18 03:13:17 2013 -0700
16906 altos: Add LPC spi driver
16908 Signed-off-by: Keith Packard <keithp@keithp.com>
16910 commit d9b42470e8889b44bb08858a610285410a200ab9
16911 Author: Keith Packard <keithp@keithp.com>
16912 Date: Sat May 18 03:02:38 2013 -0700
16914 altos: Use ao_port_t in m25 driver
16916 This uses ao_port_t for all of the chip select masks
16918 Signed-off-by: Keith Packard <keithp@keithp.com>
16920 commit 28890aa5893898cd0bb0ac033e491eb307a84ca5
16921 Author: Keith Packard <keithp@keithp.com>
16922 Date: Sat May 18 03:02:01 2013 -0700
16924 altos: Use ao_data_pres macro in ao_log_tiny
16926 Now it works on easymini too
16928 Signed-off-by: Keith Packard <keithp@keithp.com>
16930 commit 82afe3a3b737c43dbeaad41ea5af1841357297a6
16931 Author: Keith Packard <keithp@keithp.com>
16932 Date: Sat May 18 02:54:55 2013 -0700
16934 altos: Check for packet mode before trying to disable it in flight code
16936 This is only relevant for telemini
16938 Signed-off-by: Keith Packard <keithp@keithp.com>
16940 commit 52063c2679752033135fff928c7686e368d2a825
16941 Author: Keith Packard <keithp@keithp.com>
16942 Date: Sat May 18 02:54:30 2013 -0700
16944 altos: ao_data_get is in ao_data.c now, not ao_adc.c
16946 Signed-off-by: Keith Packard <keithp@keithp.com>
16948 commit e4385d29fc1b233b3ad56d4af68a175e760c1751
16949 Author: Keith Packard <keithp@keithp.com>
16950 Date: Sat May 18 02:53:32 2013 -0700
16952 altos: Allow architecture to define the type of port registers
16954 LPC11U14 has 32-bit ports, STM32 has 16 bit ports.
16956 Signed-off-by: Keith Packard <keithp@keithp.com>
16958 commit ca4f3161258356c06fe1270f7ccdf0d6939e2d34
16959 Author: Keith Packard <keithp@keithp.com>
16960 Date: Sat May 18 02:52:49 2013 -0700
16962 altos: Move ao_data.c from stm to core
16964 This should be used on every processor
16966 Signed-off-by: Keith Packard <keithp@keithp.com>
16968 commit ac089d4fb930b7dbc4161259fd9bddba94395ebc
16969 Author: Keith Packard <keithp@keithp.com>
16970 Date: Fri May 17 03:36:47 2013 -0700
16972 altos/lpc: Get USB working
16974 The lpc demo now has a USB command line.
16975 Also allocates system stack so we know when ram is tight at build time
16977 Signed-off-by: Keith Packard <keithp@keithp.com>
16979 commit 185e6d15bcda229949a984910d7394203d301db9
16980 Author: Keith Packard <keithp@keithp.com>
16981 Date: Thu May 16 18:58:24 2013 -0700
16983 altos: Allow target-specific USB endpoint specifications
16985 The LPC has only a small number of endpoints, and those are not
16986 configurable. Let the LPC USB driver pick the IN and OUT endpoints by itself.
16988 Signed-off-by: Keith Packard <keithp@keithp.com>
16990 commit 6c35e21a86ab32bc91eb10a60c071b702fc0f963
16991 Author: Keith Packard <keithp@keithp.com>
16992 Date: Tue May 7 19:27:17 2013 -0700
16994 altos: Finish off LPC USB register definitions
16996 Signed-off-by: Keith Packard <keithp@keithp.com>
16998 commit 918342016705303baa1630c62c290aaf2dcc2801
16999 Author: Keith Packard <keithp@keithp.com>
17000 Date: Thu Apr 25 20:38:32 2013 -0700
17002 altos/lpc: Start adding USB register defines
17004 Signed-off-by: Keith Packard <keithp@keithp.com>
17006 commit 91d201abcbe9373360919406427b7e4fb9e1b42e
17007 Author: Keith Packard <keithp@keithp.com>
17008 Date: Mon Apr 22 17:10:24 2013 -0500
17010 altos/lpc: Start adding USB register definitions
17012 Just the bare struct, no defines yet.
17014 Signed-off-by: Keith Packard <keithp@keithp.com>
17016 commit 9bf67798b134ad796c2f4bc9240ee450722148ec
17017 Author: Keith Packard <keithp@keithp.com>
17018 Date: Sat Apr 20 00:40:38 2013 -0500
17020 altos/lpc: Take advantage of USART TX fifo
17022 The USART has a 16-byte TX fifo; keep rough track of how full it is to
17023 avoid waiting for an interrupt after every TX byte.
17025 Signed-off-by: Keith Packard <keithp@keithp.com>
17027 commit 9e8f6ba8b779cd9635f82d6da5f113715c3ee4c7
17028 Author: Keith Packard <keithp@keithp.com>
17029 Date: Sat Apr 20 00:20:55 2013 -0500
17031 altos/lpc: Get USART running
17033 Adds a simple demo thread that spews data to the serial port
17035 Signed-off-by: Keith Packard <keithp@keithp.com>
17037 commit f9d0eb3f3154f98abb0c8952d7171f3e7d3de9b2
17038 Author: Keith Packard <keithp@keithp.com>
17039 Date: Thu Apr 18 16:15:52 2013 -0500
17041 altos/lpc: Get 100Hz timer running
17043 Use systick, which is built into the ARM core
17045 Signed-off-by: Keith Packard <keithp@keithp.com>
17047 commit 04b243e6ef212f54ed284cfbde6d5abb637bf60e
17048 Author: Keith Packard <keithp@keithp.com>
17049 Date: Thu Apr 18 15:55:26 2013 -0500
17051 lpcxpresso: Add ao_demo.c
17053 Kinda necessary for the demo to build
17055 Signed-off-by: Keith Packard <keithp@keithp.com>
17057 commit bcc65597d3d20f1d58df784100af766cee5f0f20
17058 Author: Keith Packard <keithp@keithp.com>
17059 Date: Thu Apr 18 15:54:13 2013 -0500
17061 lpc: Initial lpcxpresso bits
17063 This gets the LPC11U14 clock set to the PLL and blinks the LED.
17065 Signed-off-by: Keith Packard <keithp@keithp.com>
17067 commit 6735a391c2a1e3be01ac9e68b44ec0974592c11c
17068 Author: Keith Packard <keithp@keithp.com>
17069 Date: Fri May 17 03:34:50 2013 -0700
17071 libaltos: use PurgeComm in Windows altos_close to abort in-progress ops
17073 Instead of manually signalling the related events, use PurgeComm which
17074 can then abort the operations itself. Also make sure all of the
17075 relevant handles are set to INVALID before closing them to avoid race conditions.
17077 Signed-off-by: Keith Packard <keithp@keithp.com>
17079 commit bd8d061d0f63158b5b03814d77cb76fdf5a0abad
17080 Author: Keith Packard <keithp@keithp.com>
17081 Date: Fri May 17 03:27:20 2013 -0700
17083 libaltos: Build the linux library targets when doing a 'fat' build
17085 These are necessary for the fat release, so make sure they're built then.
17087 Signed-off-by: Keith Packard <keithp@keithp.com>
17089 commit 8a19805a6b079450b5afd5fa2334cede8495ae4a
17090 Author: Keith Packard <keithp@keithp.com>
17091 Date: Fri May 17 03:21:08 2013 -0700
17093 altos/cc1111: Hack on USB driver to make Windows happy
17095 The Windows modem driver is quite chatty at startup time, getting and
17096 setting the comm parameters each time the device is opened. Sometimes,
17097 when setting the parameters, the cc1111 would STALL EP0.
17099 Most of the time, Windows would happily pass this as an error back to
17100 AltosUI which would then re-try the open (and succeed, most of the
17103 Sometimes, Windows would stall for 30 seconds before passing the error
17104 back. This made the whole UI freeze, and I suspect most people assumed
17107 A bit of analysis with the beagle USB sniffer and I discovered the
17108 STALL settings, but there wasn't any correlation between the data on
17109 the wire and when the STALL would be generated.
17111 So, I found a couple of other cc1111 USB stacks on the net and just
17112 looked to see how our driver differed. There wasn't anything clearly
17113 related, but there were a list of small differences:
17115 1) Other drivers didn't bother waiting for the hardware to
17116 ack the USBADDR setting; doing it this way means we can set
17117 the address *before* acking the setup packet. It'll get
17118 set eventually, at which point the device will start responding to
17121 Easy to fix, and saves a bit of code space too.
17123 2) The other drivers set the STALL bit for setup packets which aren't
17124 understood. This shouldn't have any effect on 'good' systems as
17125 those shouldn't ever be generating bogus setup packets anyways.
17127 The driver already handled the STALL state in the interrupt
17128 handler, the only requirement was to figure out when to explicitly
17131 That required moving the state updating code from the start of the
17132 ep0 setup handling to the end, after the setup packet had been
17133 examined and data queued in or out as appropriate.
17135 3) Our driver explicitly queued an IN packet for any setup request
17136 that wasn't waiting for an OUT pack. This appears to tie in with
17137 the USBADDR change above as before I made that change, this change
17138 caused the driver to fail to respond to most setup packets.
17140 This was simple once the above change was made, just move the
17141 generation of the IN packet inside the code that switched to the
17144 Signed-off-by: Keith Packard <keithp@keithp.com>
17146 commit 4ef0136c27e8f47a1eb38f9cbcd2c61288732d78
17147 Author: Keith Packard <keithp@keithp.com>
17148 Date: Wed May 15 15:32:59 2013 -0700
17150 altos: Generate unmodulated carrier for CC1120 test mode
17152 This sets the deviation to 0, enables the preamble and turns on the
17153 transmitter. It will sit there happily sending a bare carrier forever
17155 Signed-off-by: Keith Packard <keithp@keithp.com>
17157 commit 1931e028bebc3cd8df9392e30eb0e888d0799768
17158 Author: Keith Packard <keithp@keithp.com>
17159 Date: Tue May 14 22:29:06 2013 -0700
17161 altos: Move MS5607 info from 'v' to 'c s'
17163 Makes more sense there.
17165 Signed-off-by: Keith Packard <keithp@keithp.com>
17167 commit 69b9f613ad36b8039f223ed30f8c75913916d82c
17168 Author: Keith Packard <keithp@keithp.com>
17169 Date: Tue May 14 22:19:07 2013 -0700
17171 altos: Remove some MMA655x debugging printfs
17173 Signed-off-by: Keith Packard <keithp@keithp.com>
17175 commit 0571531066918fdefe9447f3b4192d0c6c477afa
17176 Author: Keith Packard <keithp@keithp.com>
17177 Date: Tue May 14 10:48:24 2013 -0700
17179 altos: Grab SPI mutex until MPU6000 I2C mode is disabled
17181 If other drivers use the SPI bus, the MPU6000 gets confused as its
17182 sitting on the bus looking for I2C messages. Just grab the mutex
17183 before the OS is running and hold onto it until the MPU6000 has been initialized.
17185 Signed-off-by: Keith Packard <keithp@keithp.com>
17187 commit 9beacd77b3e8106e036e50a67312dfee414fbc51
17188 Author: Keith Packard <keithp@keithp.com>
17189 Date: Tue May 14 09:01:49 2013 -0700
17191 altos: Initialize MPU6000 CS pin for SPI mode
17193 Without this, we can't talk to the chip very well
17195 Signed-off-by: Keith Packard <keithp@keithp.com>
17197 commit 6d553230903ddd0ec522c07be0df975b38ef23d3
17198 Author: Keith Packard <keithp@keithp.com>
17199 Date: Tue May 14 09:56:16 2013 -0700
17201 altos: Fix telemega v0.3 igniter order (drogue/main moved). Label ADC dump
17203 telemega moves the igniters around so that E/F are now drogue/main.
17204 Add custom labels for ADC values to make parsing possible
17206 Signed-off-by: Keith Packard <keithp@keithp.com>
17208 commit a4e4eec827d61a05fda52ddb68b55f17b6028d5e
17209 Author: Keith Packard <keithp@keithp.com>
17210 Date: Tue May 14 09:25:08 2013 -0700
17212 altos: gps serial routines are called ao_gps_*, not ao_ublox_*
17214 This caused the u-blox driver to use serial port 1 instead of the
17215 project-specified serial port.
17217 Signed-off-by: Keith Packard <keithp@keithp.com>
17219 commit 461215eea72ff9d64748304e76b08da37ee3dfe9
17220 Author: Keith Packard <keithp@keithp.com>
17221 Date: Tue May 14 09:21:54 2013 -0700
17223 altos: Give u-blox 3 seconds after boot before we bug it
17225 Signed-off-by: Keith Packard <keithp@keithp.com>
17227 commit 5e9193f6375be27e5f7a0321fd34b6acfe81247f
17228 Author: Keith Packard <keithp@keithp.com>
17229 Date: Tue May 14 09:12:29 2013 -0700
17231 altos: Add 'g' command to ublox GPS code.
17233 Take the gps_dump function from ao_gps_skytraq.c and move it to a new
17234 file so it can be shared with the u-blox driver. That affects every
17235 skytraq and u-blox user as they need to include the new file.
17237 Signed-off-by: Keith Packard <keithp@keithp.com>
17239 commit cdad289a0803babecd30cbc0a95be99c5caadeb5
17240 Author: Keith Packard <keithp@keithp.com>
17241 Date: Wed May 15 01:24:56 2013 -0700
17243 altos: Add flash-loader for telescience-v0.2
17245 Signed-off-by: Keith Packard <keithp@keithp.com>
17247 commit 116d8570766fbd3ef529111171935637a2e466af
17248 Author: Keith Packard <keithp@keithp.com>
17249 Date: Tue May 14 08:51:22 2013 -0700
17251 altos: Set u-blox navigation settings
17253 Airborne mode, < 4g (as good as it gets)
17254 Only use 3D fixes (2D isn't very useful)
17256 Signed-off-by: Keith Packard <keithp@keithp.com>
17258 commit fb0fb6f4beab484e7fe55b39d18c1f19778f1211
17259 Author: Keith Packard <keithp@keithp.com>
17260 Date: Tue May 14 08:35:24 2013 -0700
17262 altos: Use symbolic names for ublox packet id
17264 Signed-off-by: Keith Packard <keithp@keithp.com>
17266 commit 1ccfd2d2e4b84e72e5502cb72a7da6372b5e2b47
17267 Author: Keith Packard <keithp@keithp.com>
17268 Date: Tue May 14 01:06:20 2013 -0700
17270 altosui: Generate useful KML files from TeleGPS logs
17272 Use GPS altitude when baro altitude is not present.
17273 Don't require flight number.
17275 Signed-off-by: Keith Packard <keithp@keithp.com>
17277 commit bdea4c88318a41ade3d3b6b2cbfc097ae3e4f3be
17278 Author: Keith Packard <keithp@keithp.com>
17279 Date: Tue May 14 00:38:34 2013 -0700
17281 altosui: Use GPS alt + baro height for KML altitude
17283 GPS altitude is generally more absolutely correct than baro altitude,
17284 so use that as the nominal pad altitude when generating a KML
17285 file. This results in a KML file that has the flight trace start and
17286 end closer to the ground, which is always nice.
17288 Signed-off-by: Keith Packard <keithp@keithp.com>
17290 commit 43f94e923a6a87520edcbb8fb4829e6ddf708908
17291 Author: Keith Packard <keithp@keithp.com>
17292 Date: Tue May 14 00:24:53 2013 -0700
17294 altoslib: Use sequence numbers to track GPS updates to AltosRecord
17296 State objects now record what GPS sequence ID they have to know when
17297 the GPS data has been updated. Record objects bump the GPS sequence
17298 each time new GPS data is recorded. This way, record objects aren't
17299 modified as they're iterated over to generate the list of state
17300 objects which makes it possible to iterate multiple times and get the
17301 same resulting set of states.
17303 Signed-off-by: Keith Packard <keithp@keithp.com>
17305 commit c88aa32b979f379e3cf316dcb651e264c32a5283
17306 Author: Keith Packard <keithp@keithp.com>
17307 Date: Mon May 13 22:59:26 2013 -0700
17309 altos/test: ao_gps_test_ublox uses ao_gps_blox.h
17311 Signed-off-by: Keith Packard <keithp@keithp.com>
17313 commit 61f5183fb6aff63c1133011b5625814ee56e96da
17314 Author: Keith Packard <keithp@keithp.com>
17315 Date: Mon May 13 22:58:18 2013 -0700
17317 altos: Struct used for u-blox testing had lat/lon swapped
17319 The structs in ao_gps_ublox.h are used only by the test framework, but
17320 it's useful to have that look right anyways.
17322 Signed-off-by: Keith Packard <keithp@keithp.com>
17324 commit 5a730dd7a78b5ae428bcfe809257dabedc4338f5
17325 Author: Keith Packard <keithp@keithp.com>
17326 Date: Mon May 13 22:33:12 2013 -0700
17328 altos: Switch TeleMega v0.3 to u-blox
17330 Signed-off-by: Keith Packard <keithp@keithp.com>
17332 commit d2f0dcc73df612d10ed12d364fe661ccd831f037
17333 Author: Keith Packard <keithp@keithp.com>
17334 Date: Mon May 13 22:32:25 2013 -0700
17336 altos: Provide a define for the number of sat infos in a telem packet
17338 12 fit, but it's best to use a symbolic constant
17340 Signed-off-by: Keith Packard <keithp@keithp.com>
17342 commit 50457f9983ec0a432f1050464382749436e3da94
17343 Author: Keith Packard <keithp@keithp.com>
17344 Date: Mon May 13 22:31:31 2013 -0700
17346 altos: Add U-Blox GPS driver
17350 Signed-off-by: Keith Packard <keithp@keithp.com>
17352 commit 125ff0b7c74af4db98a81439ee9f1b92fe8b8833
17353 Author: Keith Packard <keithp@keithp.com>
17354 Date: Mon May 13 22:29:22 2013 -0700
17356 altos: Don't bother fixing telelco-v0.1, just disable it
17358 Lots of stuff to do to make this old project build; just disable it
17361 Signed-off-by: Keith Packard <keithp@keithp.com>
17363 commit 672edb20434248038ef5fbb87f2c0984bd5ad513
17364 Author: Keith Packard <keithp@keithp.com>
17365 Date: Mon May 13 22:28:27 2013 -0700
17367 altosuilib: Mistake in the MegaDongle listing -- was set to TeleMega
17369 Signed-off-by: Keith Packard <keithp@keithp.com>
17371 commit 80a6b0ea5c36c307a8edc79ad10ef7a8ff3d480e
17372 Author: Keith Packard <keithp@keithp.com>
17373 Date: Mon May 13 22:27:00 2013 -0700
17375 altoslib: Correct hexfile address ranges
17377 Stop trying to use sentinal values for addresses and just keep a
17378 boolean tracking whether they've been initialized. Avoids precision
17379 errors in the variables.
17381 Signed-off-by: Keith Packard <keithp@keithp.com>
17383 commit 9bd717e71d69338b1af521b37e8bd975e503398e
17384 Author: Keith Packard <keithp@keithp.com>
17385 Date: Fri May 10 19:21:18 2013 -0700
17387 altosui: Wait for valid callsign/flight when graphing
17389 Wait for the data record to indicate that the flight value is valid
17390 before setting the graph callsign/flight/serial data.
17392 Signed-off-by: Keith Packard <keithp@keithp.com>
17394 commit 106d212ff5920c39d95751ef6249dc141970412c
17395 Merge: ecb1285 09d5d6f
17396 Author: Keith Packard <keithp@keithp.com>
17397 Date: Thu May 9 21:06:52 2013 -0700
17399 Merge branch 'master-fixes' into stm-flash-fixes
17401 commit 09d5d6f546ccef2bfd4941e590f047485bb73d76
17402 Author: Keith Packard <keithp@keithp.com>
17403 Date: Thu May 9 21:06:23 2013 -0700
17405 micropeak: Use new 'last logdir' preference for MicroPeak save/load dialogs
17407 Signed-off-by: Keith Packard <keithp@keithp.com>
17409 commit 95a3a089f9c97684918937eecd94dcac77c47696
17410 Author: Keith Packard <keithp@keithp.com>
17411 Date: Thu May 9 21:04:52 2013 -0700
17413 Information from configure about android build was misprinted
17415 A typo in the script caused it to print either 'yes' or ''
17417 Signed-off-by: Keith Packard <keithp@keithp.com>
17419 commit 17eada6e586731defa9fd75316670c2b2b1601ee
17420 Author: Keith Packard <keithp@keithp.com>
17421 Date: Thu May 9 21:04:11 2013 -0700
17423 altoslib: Add non-persistent 'last logdir' preference
17425 This is used to record the last directory for reading or writing log
17426 files so that the UI can pop back to the same place next time.
17428 Signed-off-by: Keith Packard <keithp@keithp.com>
17430 commit 271e8adbc9549c7b3b4d0ec14e4edb1a6ab715d1
17431 Author: Keith Packard <keithp@keithp.com>
17432 Date: Thu May 9 21:03:38 2013 -0700
17434 Add altosdroid notebook entry for imperial units
17436 Signed-off-by: Keith Packard <keithp@keithp.com>
17438 commit ecb128579e7576fc27c8ca93708f316b9ac91630
17439 Author: Keith Packard <keithp@keithp.com>
17440 Date: Sun Apr 28 23:06:24 2013 -0700
17442 altos: Wait after configuring boot pin before testing it
17444 Clearly the pin isn't quite ready just after it's been configured, so
17445 hang around for a while (100 nops) to let things setting down before
17446 testing the value of the pin. Makes booting a lot more reliable.
17448 Signed-off-by: Keith Packard <keithp@keithp.com>
17450 commit 4a90eec4b8ee4a35711aa74c13b3f30d12c0fe08
17451 Author: Keith Packard <keithp@keithp.com>
17452 Date: Sat Apr 27 15:33:04 2013 -0700
17454 altos/stm: Create per-product flash loaders
17456 Split the flash loader prototype into pieces so that each product can
17457 build a custom flash loader with very little code.
17459 Signed-off-by: Keith Packard <keithp@keithp.com>
17461 commit b131c5ac59bbd339a724892586023a43f97c7f90
17462 Author: Keith Packard <keithp@keithp.com>
17463 Date: Sat Apr 27 00:37:15 2013 -0700
17465 altos: Add ao_boot_chain to telemega v0.3
17467 Signed-off-by: Keith Packard <keithp@keithp.com>
17469 commit 1695f6af46ea647119d651fc09c97d604d08c736
17470 Author: Keith Packard <keithp@keithp.com>
17471 Date: Sat Apr 27 00:26:11 2013 -0700
17473 ao-tools/ao-stmload: Add --verbose flag
17475 This dumps out the serial communication so you can see where things go wrong.
17477 Signed-off-by: Keith Packard <keithp@keithp.com>
17479 commit f6d6df03826083a244715b88a30ad681f17b4510
17480 Author: Keith Packard <keithp@keithp.com>
17481 Date: Sat Apr 27 00:25:36 2013 -0700
17483 altos: Remove stdio from stm-flash
17485 This saves enough memory to fit in under 4kB
17487 Signed-off-by: Keith Packard <keithp@keithp.com>
17489 commit a2e0676f476b0e2bdd5102315ebd5904b57f384a
17490 Author: Keith Packard <keithp@keithp.com>
17491 Date: Sat Apr 27 00:24:08 2013 -0700
17493 altos: Get rodata into flash, make sure sections are aligned
17495 .rodata* needs to be in flash; otherwise strings get left in ram.
17496 Failing to align sections makes the initialized data get dumped into
17497 the wrong place in memory.
17499 Signed-off-by: Keith Packard <keithp@keithp.com>
17501 commit 2e092b383d55bcf9e2a230ccfe85052adb18b254
17502 Author: Keith Packard <keithp@keithp.com>
17503 Date: Sat Apr 27 00:23:14 2013 -0700
17505 altos: Make stm-bringup build again
17507 stm requires AO_BOOT_LOADER_BASE now
17509 Signed-off-by: Keith Packard <keithp@keithp.com>
17511 commit 0b1797312b34ba2b8121f82605f8d2c419167737
17512 Author: Keith Packard <keithp@keithp.com>
17513 Date: Sat Apr 27 00:20:47 2013 -0700
17515 altos: Run self loader when application sets boot addr to 0
17517 This causes the flash loader startup code to fall into the loader when
17518 the application sets the boot address to zero.
17520 Signed-off-by: Keith Packard <keithp@keithp.com>
17522 commit e2412e867138635d79ea0fa8d43efc0a6aa19784
17523 Author: Keith Packard <keithp@keithp.com>
17524 Date: Sat Apr 27 00:19:13 2013 -0700
17526 altos: Allow STM usb driver to be used without stdio
17528 This lets the self flashing loader be linked without any of the stdio
17529 code, which saves a bunch of memory.
17531 Signed-off-by: Keith Packard <keithp@keithp.com>
17533 commit afad5ae893a48785f3b50ff4125dc78648343a2d
17534 Author: Keith Packard <keithp@keithp.com>
17535 Date: Mon Apr 22 20:08:35 2013 -0600
17537 altos/stm-flash: Check target flash address against AO_BOOT_APPLICATION_BASE
17539 Allows that value to change
17541 Signed-off-by: Keith Packard <keithp@keithp.com>
17543 commit 9ae987073f90402821120dbe962fceb4fc9f5435
17544 Author: Keith Packard <keithp@keithp.com>
17545 Date: Mon Apr 22 20:59:12 2013 -0500
17547 ao-tools/ao-stmload: application base moved to 0x08001000
17549 And, use a symbolic name so it can be easily moved in the future
17551 Signed-off-by: Keith Packard <keithp@keithp.com>
17553 commit 9029722708b54826aa9374555470cb40922c5da5
17554 Author: Keith Packard <keithp@keithp.com>
17555 Date: Mon Apr 22 20:56:00 2013 -0500
17557 ao-tools: reboot to loader now uses 'X' instead of 'L'
17559 'L' is used by lots of other commands; switch to 'X' which is free.
17561 Sigh. Someday we'll have words for commands instead of just letters
17563 Signed-off-by: Keith Packard <keithp@keithp.com>
17565 commit dfc268e0021e1cd3045f73339a749d292a6a6300
17566 Author: Keith Packard <keithp@keithp.com>
17567 Date: Mon Apr 22 20:35:57 2013 -0500
17569 altos: Use flash loader on all STM products
17571 Includes the boot chain stuff
17573 Signed-off-by: Keith Packard <keithp@keithp.com>
17575 commit 8ded61d59888c79ef1f94e664b5fb770841a801a
17576 Author: Keith Packard <keithp@keithp.com>
17577 Date: Mon Apr 22 20:33:33 2013 -0500
17579 altos/stm: Provide another 4kB of flash space for apps
17581 With the flash loader now < 4kB, we can use the spare 4kB for applications
17583 Signed-off-by: Keith Packard <keithp@keithp.com>
17585 commit 6cd015b8b6b02bd8e0ce28f248426ae75c242b53
17586 Author: Keith Packard <keithp@keithp.com>
17587 Date: Mon Apr 22 20:32:18 2013 -0500
17589 altos/stm: Shrink stm flash loader to < 4kB
17591 Saves 4kB of flash space for applications.
17593 Signed-off-by: Keith Packard <keithp@keithp.com>
17595 commit 02681adbc5919bd3713788da352aa36ace619ef4
17596 Author: Keith Packard <keithp@keithp.com>
17597 Date: Mon Apr 22 20:30:31 2013 -0500
17599 altos/stm: Allow core timer to be excluded from build
17601 This removes all of the support for the base 100Hz timer from the
17602 system, saving space when not needed
17604 Signed-off-by: Keith Packard <keithp@keithp.com>
17606 commit a453e2245996854e722346789f972fd088e33ba8
17607 Author: Keith Packard <keithp@keithp.com>
17608 Date: Mon Apr 22 20:29:56 2013 -0500
17610 altos/stm: Don't define task macros when not tasking
17612 The necessary data structures aren't defined in this case.
17614 Signed-off-by: Keith Packard <keithp@keithp.com>
17616 commit 8d0f4bc23eae4f1e085bfb853c995f1fb6b8b594
17617 Author: Keith Packard <keithp@keithp.com>
17618 Date: Mon Apr 22 20:27:52 2013 -0500
17620 altos: Eliminate stdio looping when system has a single stdio source
17622 No need to loop if there's only one
17624 Signed-off-by: Keith Packard <keithp@keithp.com>
17626 commit 6f3bbb11880f45284f1f094990ffa32a66bf4560
17627 Author: Keith Packard <keithp@keithp.com>
17628 Date: Mon Apr 22 20:24:48 2013 -0500
17630 altos: Move ao_notask to core
17632 The STM flash loader wants to be taskless too, share this very simple
17633 implementation of sleep/wakeup.
17635 Signed-off-by: Keith Packard <keithp@keithp.com>
17637 commit 21356aec543dd85426a52469426351ce006a17dd
17638 Author: Keith Packard <keithp@keithp.com>
17639 Date: Sun Mar 24 16:16:55 2013 -0700
17641 ao-tools/ao-stmload: Remove IRC dregs in source code
17645 Signed-off-by: Keith Packard <keithp@keithp.com>
17647 commit 9df4e874b2785aec4aecce2f767543ee9f638b4f
17648 Author: Keith Packard <keithp@keithp.com>
17649 Date: Sun Mar 24 16:15:21 2013 -0700
17651 altosui/altoslib: Move more flashing code from altosui to altoslib
17653 Required a bit of refactoring to eliminate swing types from the
17654 flashing code, but nothing major.
17656 Signed-off-by: Keith Packard <keithp@keithp.com>
17658 commit 09e0c304b420a12fa1616005db946523c6e5bef1
17659 Author: Keith Packard <keithp@keithp.com>
17660 Date: Sun Mar 24 16:01:08 2013 -0700
17662 altosui & altoslib: Move a pile of debug/programming bits to altoslib
17664 Prepare to create external Java utilities to flash devices
17666 Signed-off-by: Keith Packard <keithp@keithp.com>
17668 commit 9acd488c5f945511f813d84c3c6f69846d4601e8
17669 Author: Keith Packard <keithp@keithp.com>
17670 Date: Sun Mar 24 15:35:15 2013 -0700
17672 altosui: Support 32-bit ihx files
17674 This just borrows the same 32-bit ihx parsing changes from ao-tools.
17676 Signed-off-by: Keith Packard <keithp@keithp.com>
17678 commit c9ba2d17b979410acfa41f9954674757f7f321fc
17679 Author: Keith Packard <keithp@keithp.com>
17680 Date: Sun Mar 24 15:33:31 2013 -0700
17682 ao-tools/ao-stmload: Fix ELF, add IHX, add self-flashing
17684 This splits loading into ELF and IHX paths, and splits flashing into
17685 stlink and self-flashing paths.
17687 Signed-off-by: Keith Packard <keithp@keithp.com>
17689 commit 1f30b1f14dbab6e6ea94177e459c80732e31e433
17690 Author: Keith Packard <keithp@keithp.com>
17691 Date: Sun Mar 24 15:30:24 2013 -0700
17693 ao-tools/lib: Add loading support for 32-bit ihx files
17695 These place the upper 16 bits of the address in a special record. That
17696 requires handling records in file order, so don't sort them in address
17697 order anymore, instead find the bounds of the loaded data by scanning
17700 Signed-off-by: Keith Packard <keithp@keithp.com>
17702 commit 7d98fc5d3f106f3063608a2e5c69d9359061437a
17703 Author: Keith Packard <keithp@keithp.com>
17704 Date: Sun Mar 24 15:27:42 2013 -0700
17706 altos/stm: Add comments to the .ld files explaining how the romconfig stuff works
17708 Would be nice to be able to explicitly define addresses for the
17709 romconfig variables, but I can't figure out how to make that
17710 work. Instead, just explicitly load the files in teh right order to
17711 make things land in the right places.
17713 Signed-off-by: Keith Packard <keithp@keithp.com>
17715 commit ab1cbc0f51ddf897a3a7a768862d9dfe26a6c14d
17716 Author: Keith Packard <keithp@keithp.com>
17717 Date: Sun Mar 24 15:26:26 2013 -0700
17719 altos/stm: Add .elf to .ihx rule
17721 Uses objcopy -O ihex to extract the initialized bits from an elf file
17723 Signed-off-by: Keith Packard <keithp@keithp.com>
17725 commit 9362d400d06aa3badfc826d8edbd7c55406b4f7d
17726 Author: Keith Packard <keithp@keithp.com>
17727 Date: Sun Mar 24 15:24:42 2013 -0700
17729 altos: Switch ao_stm_flash to read/write binary blocks
17731 Change from development testing code to something that actually reads
17732 and writes data from the USB link.
17734 Signed-off-by: Keith Packard <keithp@keithp.com>
17736 commit a3f668e71751608ea2e38519003446bc6ceb348f
17737 Author: Keith Packard <keithp@keithp.com>
17738 Date: Sun Mar 24 15:21:58 2013 -0700
17740 altos: Create ihx version of stm-demo
17742 Both ao-stmload and the eventual java loader will support ihx files.
17744 Signed-off-by: Keith Packard <keithp@keithp.com>
17746 commit 5db4d5e5b1272b161102e889e65b9c7bc7928352
17747 Author: Keith Packard <keithp@keithp.com>
17748 Date: Sat Mar 23 02:23:03 2013 -0700
17750 altos: Add erase command to stm-flash app. Validate addresses.
17752 This also leaves the code writing fixed values and printing read data
17753 in ascii instead of binary. Useful for debugging, will want changing
17756 Signed-off-by: Keith Packard <keithp@keithp.com>
17758 commit ac6b4fca0970faa0a537a813242585693b839469
17759 Author: Keith Packard <keithp@keithp.com>
17760 Date: Sat Mar 23 02:21:27 2013 -0700
17762 altos: Fix STM flash programming
17764 Wait for flash to go non-busy after writing or erasing a page and
17765 before jumping back out of the RAM code.
17767 Export a separate 'erase' operation for testing.
17769 Re-lock flash after every operation.
17771 Signed-off-by: Keith Packard <keithp@keithp.com>
17773 commit 35ef1f17e3efaa6d586ab7bb301f8133d52023b6
17774 Author: Keith Packard <keithp@keithp.com>
17775 Date: Sat Mar 23 02:18:55 2013 -0700
17777 altos: Validate boot chain start address
17779 If the first block of boot memory has been smashed, and the start
17780 address is bogus, don't bother trying to jump to the
17781 application. This makes the system more resiliant to flash failures,
17782 presuming the loader erases the first block, programs the other blocks
17783 and then finally comes back to program the first block.
17785 Signed-off-by: Keith Packard <keithp@keithp.com>
17787 commit db7f17980c303e442f88c8a4168351dbc2c0b1a0
17788 Author: Keith Packard <keithp@keithp.com>
17789 Date: Sat Mar 23 02:17:04 2013 -0700
17791 altos: Mark .boot section as (NOLOAD)
17793 For some reason, the silly linker marks things in section .boot as
17794 data rather than bss, so they'd end up initialized by default. Force
17795 them to be NOLOAD so they preserve values across reboot so that boot
17796 chaining works properly.
17798 Signed-off-by: Keith Packard <keithp@keithp.com>
17800 commit efc0898d824ebd0abe0b088ed9a8b40c34623ab7
17801 Author: Keith Packard <keithp@keithp.com>
17802 Date: Sat Mar 23 02:15:35 2013 -0700
17804 altos: Fix up stm-flash output file name. Use discovery LED pins
17806 Include the AltOS version in the file name, just like any other AltOS
17809 Switch the LEDs to the discovery board as we're using
17810 that. Eventually, we'll stop using LEDs entirely.
17812 Signed-off-by: Keith Packard <keithp@keithp.com>
17814 commit 4bc55ee8fabc9f4c997c2a515d74baada590c93e
17815 Author: Keith Packard <keithp@keithp.com>
17816 Date: Mon Mar 11 18:14:28 2013 -0700
17818 altos: Add actual flashing functions to stm-flash app
17820 Signed-off-by: Keith Packard <keithp@keithp.com>
17822 commit b1a43ce313c85cb7f8f16f7f0647d9d4320ba692
17823 Author: Keith Packard <keithp@keithp.com>
17824 Date: Mon Mar 11 13:21:04 2013 -0700
17826 altos: Clean up boot loader support
17828 Split out code into separate files.
17829 Add support for getting back to boot loader from application.
17831 Signed-off-by: Keith Packard <keithp@keithp.com>
17833 commit 56a7cbbf51f5c9ebbfe17d1cc30ed807572af3cc
17834 Author: Keith Packard <keithp@keithp.com>
17835 Date: Mon Mar 11 00:01:52 2013 -0700
17837 altos: Add program flash function
17839 And get it loaded to RAM so it can execute correctly.
17841 Nothing calls it yet...
17843 Signed-off-by: Keith Packard <keithp@keithp.com>
17845 commit c9c35b100c3fcae661501d2bf89eedc7fceb2e1c
17846 Author: Keith Packard <keithp@keithp.com>
17847 Date: Sun Mar 10 21:02:59 2013 -0700
17849 altos: Make stm-flash capable of switching to application
17851 This shrinks the base OS load down a bit as well so that stm-flash
17852 fits comfortably in the first 8kB of memory.
17854 Signed-off-by: Keith Packard <keithp@keithp.com>
17856 commit a6887032b4d217bca5236ea15389218f10d69545
17857 Author: Keith Packard <keithp@keithp.com>
17858 Date: Sun Feb 24 00:18:14 2013 -0800
17860 Add STM self-flashing loader
17862 This allows the real application to get loaded at 0x2000 and jumps to
17863 that at startup time if the boot pin is set appropriately
17865 Signed-off-by: Keith Packard <keithp@keithp.com>
17867 commit 887209b61ac3012d0fd2206cf1016c44f59cb432
17868 Author: Keith Packard <keithp@keithp.com>
17869 Date: Tue May 7 19:29:06 2013 -0700
17871 altos: Sanity check barometer before going to pad mode
17873 Make sure the barometer is reporting some sensible value before
17874 letting TM try to fly the rocket.
17876 Signed-off-by: Keith Packard <keithp@keithp.com>
17878 commit 802ca114ca064a9dd557a82e992653b145f8e660
17879 Author: Keith Packard <keithp@keithp.com>
17880 Date: Tue May 7 19:28:07 2013 -0700
17882 altos: Elide M25 debug output from storage info command
17884 This is just chip-specific info that no UI actually needs. It takes a
17885 bunch of ROM to write it though, making TeleMetrum not have much space left.
17887 Signed-off-by: Keith Packard <keithp@keithp.com>
17889 commit 3876b5bfad383119339aea51e2cf301012a1f991
17890 Author: Keith Packard <keithp@keithp.com>
17891 Date: Mon May 6 16:08:52 2013 -0700
17893 altos: Set APRS deviation to 3kHz
17895 I finally found a bunch of references to APRS on the net and they all
17896 appear to assume a 3kHz deviation. Let's see if this works better with
17899 Signed-off-by: Keith Packard <keithp@keithp.com>
17901 commit 4458b5a3cd3f88188c820cd0763f4e1d99fff311
17902 Author: Keith Packard <keithp@keithp.com>
17903 Date: Fri May 3 01:07:06 2013 -0700
17905 altos/test: Fix warning in ao_aprs_test
17907 Was not forward-declaring ao_radio_send_aprs, causing a warning
17909 Signed-off-by: Keith Packard <keithp@keithp.com>
17911 commit 091582c446319fe4a79154153ece5372b2faec83
17912 Author: Keith Packard <keithp@keithp.com>
17913 Date: Wed May 1 08:58:17 2013 -0700
17915 altos: Use SYSTICK on STM32L
17917 It's probably more power efficient than using one of the timers, and
17918 it's certainly easier to configure.
17920 Signed-off-by: Keith Packard <keithp@keithp.com>
17922 commit b7b0ddfddee3f8e21f21d67cd9f522fa50777265
17923 Author: Keith Packard <keithp@keithp.com>
17924 Date: Wed May 1 08:56:57 2013 -0700
17926 altos: Mark GPS telemetry packets with GPS time stamp
17928 This provides a reasonable accurate indication of the system time when
17929 the GPS location data was received, and also makes sure GPS packets
17930 get some timestamp when no other telemetry is being transmitted.
17932 Signed-off-by: Keith Packard <keithp@keithp.com>
17934 commit 6a6a5d0afa646564a9277ad3bd80c4225247a27b
17935 Author: Keith Packard <keithp@keithp.com>
17936 Date: Tue Apr 30 20:25:20 2013 -0700
17938 altoslib: Update GPS state even if new state is unlocked
17940 Otherwise, we can't see fine GPS details while GPS is unlocked, and
17943 Signed-off-by: Keith Packard <keithp@keithp.com>
17945 commit 1e9b405e939136d25d937334d1f14f06c7d6127b
17946 Author: Keith Packard <keithp@keithp.com>
17947 Date: Tue Apr 30 19:04:26 2013 -0700
17949 altos: Use separate exception stack on STM32L
17951 This reserves 512 bytes of memory for a stack, then makes sure that
17952 exceptions continue to use that stack while processes use the per-task
17955 Signed-off-by: Keith Packard <keithp@keithp.com>
17957 commit ac72d1c298fc553808a8e04a65482d4990f177d7
17958 Author: Keith Packard <keithp@keithp.com>
17959 Date: Tue Apr 30 18:57:53 2013 -0700
17961 altos: Reduce stack usage of FAT driver and logger
17963 Move some large stack arrays to static storage.
17964 Also eliminates some printf error messages which don't seem that
17965 useful except for debugging.
17967 Signed-off-by: Keith Packard <keithp@keithp.com>
17969 commit df70e3e87874d80516c6d43cfe745d511d54f206
17970 Author: Keith Packard <keithp@keithp.com>
17971 Date: Tue Apr 30 00:12:44 2013 -0700
17973 altos: Open up the DVGA gain to use all of the available settings
17975 We usually work in RF quiet areas; let the AGC hardware try all of the
17976 available gain settings.
17978 Signed-off-by: Keith Packard <keithp@keithp.com>
17980 commit e18910659e56ea52ee493d8cc4bce4b219d5bb75
17981 Author: Keith Packard <keithp@keithp.com>
17982 Date: Tue Apr 30 00:06:08 2013 -0700
17984 altos: Stop using telelco v0.2 top LEDS for radio TX/RX
17986 The top LEDs are now used for signal strength; a red LED indicates
17987 failed communcations, so we don't need to blink stuff and annoy the user.
17989 Signed-off-by: Keith Packard <keithp@keithp.com>
17991 commit 8744fd5d541955b0920c7d8e2696039cdcfdf1dc
17992 Author: Keith Packard <keithp@keithp.com>
17993 Date: Tue Apr 30 00:05:33 2013 -0700
17995 altos: Make cc1120 driver return false on recv timeout
17997 Was returning an uninitialized value, which was often not zero
17999 Signed-off-by: Keith Packard <keithp@keithp.com>
18001 commit 4fe42801f42f2fc2688555f4585dbebc28bb2d61
18002 Author: Keith Packard <keithp@keithp.com>
18003 Date: Mon Apr 29 23:53:43 2013 -0700
18005 altos: Reconfigure CC1120 receiver to match our usage
18007 Open up the AGC to the full range.
18008 Set the AGC ref based on our receive BW (100kHz).
18010 Signed-off-by: Keith Packard <keithp@keithp.com>
18012 commit eb0e1720be2aa4fb6729ceada09c18947bfee2bc
18013 Author: Keith Packard <keithp@keithp.com>
18014 Date: Mon Apr 29 23:20:25 2013 -0700
18016 altos: Compute "real" RSSI value in radio code as needed
18018 Instead of dragging around the weird CC1111 RSSI values, just compute
18019 a dBm value in a signed 8-bit integer, ao_radio_rssi. Use that
18020 everywhere we need RSSI internally. We leave the weird CC1111 value in
18021 the packet reply as that's what the host expects.
18023 Signed-off-by: Keith Packard <keithp@keithp.com>
18025 commit 949700f276b80b4eb28f15b5559714f430f227f1
18026 Author: Keith Packard <keithp@keithp.com>
18027 Date: Mon Apr 29 20:24:16 2013 -0700
18029 altosdroid: Add Notebook entry for reloading telem data option
18031 This lets the user recover the rocket flight data after stopping the
18032 application but before recovering the rocket.
18034 Signed-off-by: Keith Packard <keithp@keithp.com>
18036 commit c9f2e6471c11a1f9feb183e05f24c53968098bdb
18037 Author: Keith Packard <keithp@keithp.com>
18038 Date: Sun Apr 28 23:30:29 2013 -0700
18040 altos: More .gitignore bits
18044 Signed-off-by: Keith Packard <keithp@keithp.com>
18046 commit ab99d71c4ba97a28ee463170d10712b2de94dc50
18047 Author: Keith Packard <keithp@keithp.com>
18048 Date: Sun Apr 28 23:27:32 2013 -0700
18050 altos: Add a bunch of .gitignore files
18052 Ignore ao_product.h and built binaries
18054 Signed-off-by: Keith Packard <keithp@keithp.com>
18056 commit 85d32468210c9989ae52bd29f883c4380af43961
18057 Author: Keith Packard <keithp@keithp.com>
18058 Date: Sun Apr 28 23:25:37 2013 -0700
18060 altos: Add ublox checksum app to generate ublox config lines
18062 Signed-off-by: Keith Packard <keithp@keithp.com>
18064 commit 257500776935b5950cd7c49f9c799b3174d9232d
18065 Author: Keith Packard <keithp@keithp.com>
18066 Date: Sun Apr 28 23:22:41 2013 -0700
18068 altos: Add .gitignore to kalman test dir
18070 commit 5a77a62bce5e5ab5998f24588839f3c8a1cc6221
18071 Author: Keith Packard <keithp@keithp.com>
18072 Date: Sun Apr 28 23:21:17 2013 -0700
18074 altos: Build test framework for kalman filter
18076 This has some known flight data and generates kalman filter
18077 information for them to test
18079 Signed-off-by: Keith Packard <keithp@keithp.com>
18081 commit 24a03d0c64fc0b56ad5ccfd6588aa47690ea2a65
18082 Author: Keith Packard <keithp@keithp.com>
18083 Date: Sun Apr 28 23:15:28 2013 -0700
18085 altos: Ignore ao_aes_test binary
18087 Signed-off-by: Keith Packard <keithp@keithp.com>
18089 commit e2c697af790d53c68154facc19e4096aed5de798
18090 Author: Keith Packard <keithp@keithp.com>
18091 Date: Sun Apr 28 23:14:50 2013 -0700
18093 altos/test: Add telemega plot helper script
18095 Signed-off-by: Keith Packard <keithp@keithp.com>
18097 commit 086217bbde6d549cad61bdde728c75d29023d1c6
18098 Author: Keith Packard <keithp@keithp.com>
18099 Date: Sun Apr 28 23:11:27 2013 -0700
18101 altos: Add nickle micropeak log parsing code
18103 I think this was just some debugging stuff, but it doesn't seem useless
18105 Signed-off-by: Keith Packard <keithp@keithp.com>
18107 commit 5d46d26d714cc172b5ea493478d9dd3cad323152
18108 Author: Keith Packard <keithp@keithp.com>
18109 Date: Sun Apr 28 23:09:54 2013 -0700
18111 altos: Add telelco-v0.2 project
18113 Signed-off-by: Keith Packard <keithp@keithp.com>
18115 commit 38d4110e59a44687d8a4743b8cd04cbf2761c9d8
18116 Author: Keith Packard <keithp@keithp.com>
18117 Date: Sun Apr 28 23:08:03 2013 -0700
18119 altos: Allow LCD segments to not be multiplexed across digits
18121 This allows each LCD segment to be individually configured as to which
18122 COM and which SEG drives it, permitting maximum flexibility in wiring.
18124 Signed-off-by: Keith Packard <keithp@keithp.com>
18126 commit f09b2fc7fcfb1b3dcb1a46a8b9856092dd59866b
18127 Author: Keith Packard <keithp@keithp.com>
18128 Date: Sun Apr 28 23:05:18 2013 -0700
18130 altos: Clear any broken cc1120 TX fifo bits before transmitting
18132 This just goes and clears the transmitter before using it, just in
18133 case it got wedged somehow. It also clears the bits while waiting for
18134 the radio to go idle, otherwise it'd never make it.
18136 Signed-off-by: Keith Packard <keithp@keithp.com>
18138 commit b878ca38045b1bee6ea4d649298727ac3fa197c2
18139 Author: Keith Packard <keithp@keithp.com>
18140 Date: Sun Apr 28 23:03:57 2013 -0700
18142 altos: Make cc1120 driver wait for TX finished
18144 Otherwise, we may come in and try to use the radio again too quickly,
18145 causing it to go into a TX fifo error state.
18147 This change watches the MARC status until the transmitter is
18148 explicitly marked as finished.
18150 Signed-off-by: Keith Packard <keithp@keithp.com>
18152 commit f677a83348a9568679240ee9d731ab454f289831
18153 Author: Keith Packard <keithp@keithp.com>
18154 Date: Sun Apr 28 23:02:12 2013 -0700
18156 altos: Provide timeout value to ao_radio_recv
18158 Instead of using ao_alarm around calls to ao_radio_recv, provide an
18159 explicit timeout value as needed by radio functions with more
18160 complicated system interaction than the cc1111. The timeout is 8 bits
18163 Signed-off-by: Keith Packard <keithp@keithp.com>
18165 commit 0488cd9cffc837e99490a0761216bbc5847ff400
18166 Author: Keith Packard <keithp@keithp.com>
18167 Date: Sun Apr 28 22:52:23 2013 -0700
18169 altos: Build test framework for AES code
18171 Simple CBC-CMAC test with a constant 0 key and constant 0 data for now.
18173 Signed-off-by: Keith Packard <keithp@keithp.com>
18175 commit 3edbaa90fb7cb31fa0bd835a7c6c8930fd6dfeb6
18176 Author: Keith Packard <keithp@keithp.com>
18177 Date: Sat Apr 27 23:23:33 2013 -0700
18179 altos: Make telemega-v0.3 binary use the right name
18181 Signed-off-by: Keith Packard <keithp@keithp.com>
18183 commit 168188f6650dc9a777d57f9c7a8ff1be957bc892
18184 Author: Keith Packard <keithp@keithp.com>
18185 Date: Mon Apr 22 20:23:48 2013 -0500
18187 altos/stm: Remove USB EP0 task
18189 Handl EP0 actions from interrupt handler. This allows USB to be used
18190 in a taskless environment, like the STM flash loader
18192 Signed-off-by: Keith Packard <keithp@keithp.com>
18194 commit 0b6128d634c49e1790675ae8111e970b1af1f141
18195 Author: Keith Packard <keithp@keithp.com>
18196 Date: Sun Mar 24 15:29:32 2013 -0700
18198 ao-tools/lib: Deal with binary USB data in debugging output
18200 Dump non-ascii characters in hex format.
18202 Signed-off-by: Keith Packard <keithp@keithp.com>
18204 commit 3cbec0292d5167bce5c23eeea95f7a2d13bccc79
18205 Author: Keith Packard <keithp@keithp.com>
18206 Date: Sun Mar 24 15:20:09 2013 -0700
18208 altos/stm: Always declare all romconfig variables
18210 I haven't figured out how to assign addresses for specific initialized
18211 variables, so we'll just have to always declare all of them and make
18212 sure that we add new ones at the end.
18214 Signed-off-by: Keith Packard <keithp@keithp.com>
18216 commit 4551be8b03a795ece94fd303a1f556c63c0a0096
18217 Author: Keith Packard <keithp@keithp.com>
18218 Date: Sun Mar 24 15:14:12 2013 -0700
18220 altos: Call ao_task_init before initializing any drivers
18222 When using task queues, the sleep queues must be initialized before
18223 any invocation of ao_wakeup or the OS will crash. Just make sure
18224 ao_task_init is always invoked early in the task process to get that done.
18226 Signed-off-by: Keith Packard <keithp@keithp.com>
18228 commit 6dea353e732b6e19586c844796bc3bb848cc92f8
18229 Author: Keith Packard <keithp@keithp.com>
18230 Date: Sun Mar 10 21:05:34 2013 -0700
18232 altos: Expose ao_put_string function
18234 This works like puts, except it doesn't add a trailing newline.
18236 Signed-off-by: Keith Packard <keithp@keithp.com>
18238 commit 1629acba4a63baae2c687ed56a17d02faf45f5e5
18239 Author: Keith Packard <keithp@keithp.com>
18240 Date: Thu May 2 23:14:02 2013 -0700
18242 Allow build without SDCC
18244 The AltOS directory handles not building the cc1111 apps when sdcc is
18245 missing already, so don't require it, just whinge if it's missing
18247 Signed-off-by: Keith Packard <keithp@keithp.com>
18249 commit 7cce6c205e4595894e033ab8f0acc8064bf9f561
18250 Merge: 75f8229 5591509
18251 Author: Bdale Garbee <bdale@gag.com>
18252 Date: Mon Apr 29 17:24:43 2013 -0600
18254 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
18256 commit 75f8229d4a8d7c9a28ea3d88fda72af0d1f1ccc2
18257 Author: Bdale Garbee <bdale@gag.com>
18258 Date: Mon Apr 29 17:11:48 2013 -0600
18260 add libssl-dev as a build dep since it's used in FAT filesystem test code
18262 commit f2a8ac537d254cc08c0be9c16bf2d5cc03fd04fc
18263 Author: Bdale Garbee <bdale@gag.com>
18264 Date: Mon Apr 29 17:06:57 2013 -0600
18266 point to pkgconfig content in /opt/cortex so stlink stuff works
18268 commit 55915098f2668e3a71568d51a9888dc4bdf40992
18269 Author: Keith Packard <keithp@keithp.com>
18270 Date: Sat Apr 27 16:07:34 2013 -0700
18272 altosdroid: Add wish for persistent TBT and freq settings
18274 Signed-off-by: Keith Packard <keithp@keithp.com>
18276 commit 38a680e1407a80ff8ad19e1a90dd4e87b22fe922
18277 Author: Keith Packard <keithp@keithp.com>
18278 Date: Sat Apr 27 00:37:36 2013 -0700
18280 altos: All STM ADC users need to declare HAS_ADC_TEMP
18282 Otherwise we can't configure the ADC unit correctly at boot time
18284 Signed-off-by: Keith Packard <keithp@keithp.com>
18286 commit 2717f14567c1fe1bb061024332c8022ef0e06049
18287 Author: Keith Packard <keithp@keithp.com>
18288 Date: Sat Apr 27 00:36:11 2013 -0700
18290 altos: Build telemega-v0.3 by default
18292 Signed-off-by: Keith Packard <keithp@keithp.com>
18294 commit cef4e3ee95037050ae859fb2fdc0a57373764bd8
18295 Merge: fefc021 f3ee7de
18296 Author: Keith Packard <keithp@keithp.com>
18297 Date: Thu Apr 25 22:22:50 2013 -0700
18299 Merge remote-tracking branch 'origin/master'
18301 commit fefc021045089ffd00d03e4c4e6cf42a13692828
18302 Author: Keith Packard <keithp@keithp.com>
18303 Date: Thu Apr 25 22:21:26 2013 -0700
18305 altos: Add TeleMega v0.3 support
18307 Includes adding SPI support to the MPU6000 driver
18309 Signed-off-by: Keith Packard <keithp@keithp.com>
18311 commit 38206dd71e70565ded505a1e86257cd49b10bf9b
18312 Author: Keith Packard <keithp@keithp.com>
18313 Date: Thu Apr 25 21:27:03 2013 -0700
18315 altos: Add MR25 everspin MRAM driver
18317 Signed-off-by: Keith Packard <keithp@keithp.com>
18319 commit 4ed83e34d1163c7fae0a205528c60dc83973082a
18320 Author: Keith Packard <keithp@keithp.com>
18321 Date: Thu Apr 25 21:25:39 2013 -0700
18323 altos: Make SD card driver compile without radio support
18325 The SD card driver blocks the radio when trying to access the card as
18326 that operation appears very sensitive to RFI. This fix makes the
18327 driver work when there *isn't* a radio driver in the same device.
18329 Signed-off-by: Keith Packard <keithp@keithp.com>
18331 commit f3ee7deb6b2fbae7e3c66fe0af0cba36378793f1
18332 Author: Bdale Garbee <bdale@gag.com>
18333 Date: Thu Apr 25 00:26:39 2013 -0600
18335 document need for an ARM Cortex toolchain in /opt/cortex, point to build docs
18337 commit 90b0db1ae53182c94bf12d661446fc369d916366
18338 Author: Keith Packard <keithp@keithp.com>
18339 Date: Mon Apr 22 15:53:04 2013 -0500
18341 Re-add telemega outline pictures
18343 after the great renaming
18345 Signed-off-by: Keith Packard <keithp@keithp.com>
18347 commit e9a6c4f71e02bb0073dcd030de735904494da81f
18348 Author: Keith Packard <keithp@keithp.com>
18349 Date: Mon Apr 22 15:15:03 2013 -0500
18351 altos: Re-generate TeleMega bits
18353 Lost in the great megametrum rename
18355 Signed-off-by: Keith Packard <keithp@keithp.com>
18357 commit aa7eac32adf4c2cdf441991d02411758f2682d1e
18358 Author: Bdale Garbee <bdale@gag.com>
18359 Date: Mon Apr 22 13:00:26 2013 -0600
18361 name change from MegaMetrum to TeleMega
18363 commit 8c05f608c8f103649c1e5ec0d5742621e233af78
18364 Author: Keith Packard <keithp@keithp.com>
18365 Date: Mon Apr 22 11:06:36 2013 -0500
18367 Move cortex toolchain to /opt/cortex
18369 Signed-off-by: Keith Packard <keithp@keithp.com>
18371 commit 6f92ab336a258e8b1ddf58de33d6883251b9532d
18372 Author: Keith Packard <keithp@keithp.com>
18373 Date: Sun Apr 21 21:04:50 2013 -0500
18375 altosdroid: Add request for sat images to AltosDroid Notebook
18377 Signed-off-by: Keith Packard <keithp@keithp.com>
18379 commit 045da152fae82712b937bc81f02c9531e042cbe0
18380 Author: Keith Packard <keithp@keithp.com>
18381 Date: Sun Apr 21 20:53:14 2013 -0500
18383 altosdroid: Add a few more Notebook entries
18385 Signed-off-by: Keith Packard <keithp@keithp.com>
18387 commit 27afe30176051fca816d85c1be265ac663ef851c
18388 Author: Mike Beattie <mike@ethernal.org>
18389 Date: Mon Apr 22 13:50:35 2013 +1200
18391 altosdroid: Bump APK version, and re-upload.
18393 Didn't re-build altoslib for the previous APK!
18395 Signed-off-by: Mike Beattie <mike@ethernal.org>
18397 commit 759376cd0aac61c5afce31aed27ef98aba791173
18398 Author: Mike Beattie <mike@ethernal.org>
18399 Date: Mon Apr 22 13:50:13 2013 +1200
18401 altos: update .gitignore files
18403 Signed-off-by: Mike Beattie <mike@ethernal.org>
18405 commit b4ffb3ed36fc8696603616bf5f31b07fb3829614
18406 Author: Bdale Garbee <bdale@gag.com>
18407 Date: Sat Apr 20 23:55:06 2013 -0600
18409 document my snazzy new 4-pin to MM v0.1 debug cable
18411 commit 45d638634e389bab61b0ee792420609eb8a9ad97
18412 Author: Keith Packard <keithp@keithp.com>
18413 Date: Sat Apr 20 22:30:23 2013 -0500
18415 altosdroid: Add Notebook to track feature requests
18417 Signed-off-by: Keith Packard <keithp@keithp.com>
18419 commit 2e28d3541b8da31ebef5a199baf8f544d238298e
18420 Author: Keith Packard <keithp@keithp.com>
18421 Date: Sat Apr 20 22:16:28 2013 -0500
18423 libaltos: Delay after opening bluetooth device on linux
18425 Writes immediately after the open disappear sometimes.
18427 Signed-off-by: Keith Packard <keithp@keithp.com>
18429 commit 02a564bbc3a23b4f90685e8b29083ddb3e4b3563
18430 Author: Keith Packard <keithp@keithp.com>
18431 Date: Sat Apr 20 22:05:01 2013 -0500
18433 libaltos: Try Bluetooth open 5 times on EBUSY
18435 After closing Bluetooth, it can take a second before the device is up
18436 for another connection. Hang around retrying a few times.
18438 Signed-off-by: Keith Packard <keithp@keithp.com>
18440 commit 6348186397dbef6da912586cea58d6663c511501
18441 Author: Keith Packard <keithp@keithp.com>
18442 Date: Sat Apr 20 21:40:47 2013 -0500
18444 doc: Start filling in details about Altos Droid flight monitoring
18446 This is almost all identical to AltosUI; I think we'll want to share
18449 Signed-off-by: Keith Packard <keithp@keithp.com>
18451 commit 0d49c16c6c33264952854b9f24bc737d92036449
18452 Author: Keith Packard <keithp@keithp.com>
18453 Date: Sat Apr 20 17:38:15 2013 -0500
18455 doc: Add a bunch of Altos Droid material to the docs
18457 Signed-off-by: Keith Packard <keithp@keithp.com>
18459 commit 6055ee0b7fb99f1b41ece8ba912bdd201ea35b1b
18460 Author: Mike Beattie <mike@ethernal.org>
18461 Date: Sun Apr 21 14:52:56 2013 +1200
18463 altosdroid: Release v1.2, push to play store.
18465 Signed-off-by: Mike Beattie <mike@ethernal.org>
18467 commit 49caac78786014d443d9c05f47b5eb3070ec9bd3
18468 Merge: 5b7bbf1 cbf38c5
18469 Author: Mike Beattie <mike@ethernal.org>
18470 Date: Sun Apr 21 14:51:07 2013 +1200
18472 Merge branch 'altosdroid'
18474 commit cbf38c557a2046b6d6af3a9aebc0cef8e0dc5f11
18475 Author: Mike Beattie <mike@ethernal.org>
18476 Date: Sun Apr 21 14:46:41 2013 +1200
18478 altosdroid: Make the service class implement locationlistener
18480 Signed-off-by: Mike Beattie <mike@ethernal.org>
18482 commit c5b31a14e1ceeb9a33e0016f345832344d24ced7
18483 Author: Mike Beattie <mike@ethernal.org>
18484 Date: Sun Apr 21 14:44:07 2013 +1200
18486 altosdroid: fix up 'send last' code.
18488 Signed-off-by: Mike Beattie <mike@ethernal.org>
18490 commit cc674d8f991a3a055236ad8b51fecd99080540e1
18491 Author: Mike Beattie <mike@ethernal.org>
18492 Date: Sun Apr 21 14:41:50 2013 +1200
18494 altosdroid: check for mAltosVoice being null.
18496 Signed-off-by: Mike Beattie <mike@ethernal.org>
18498 commit 7701e142f9e3a81c536c546c9a0abfb3ba709abc
18499 Author: Mike Beattie <mike@ethernal.org>
18500 Date: Sun Apr 21 14:41:28 2013 +1200
18502 altosdroid: set tab height based on screen density.
18504 Signed-off-by: Mike Beattie <mike@ethernal.org>
18506 commit a9e02e32cb10e5b5f17cd555bb28fdc205ac3612
18507 Author: Mike Beattie <mike@ethernal.org>
18508 Date: Sun Apr 21 14:40:58 2013 +1200
18510 altosdroid: Add filters for TeleBT bluetooth devices.
18512 Signed-off-by: Mike Beattie <mike@ethernal.org>
18514 commit b0d6e2000d1b48859f5a276a5af254cc1a6cc9ad
18515 Author: Mike Beattie <mike@ethernal.org>
18516 Date: Sun Apr 21 14:40:33 2013 +1200
18518 altosdroid: incorrect property syntax in pad xml
18520 Signed-off-by: Mike Beattie <mike@ethernal.org>
18522 commit d1ca6b5805cb5e934e013463448b75dd4a3c864f
18523 Author: Mike Beattie <mike@ethernal.org>
18524 Date: Sun Apr 21 14:40:03 2013 +1200
18526 altosdroid: whitespace and import tidyup
18528 Signed-off-by: Mike Beattie <mike@ethernal.org>
18530 commit ecfc8a08147cfd179b341475333d68a39c978f0f
18531 Author: Keith Packard <keithp@keithp.com>
18532 Date: Sat Apr 20 17:16:50 2013 -0500
18534 altosdroid: Update distance/bearing on map tab
18536 Signed-off-by: Keith Packard <keithp@keithp.com>
18538 commit 5b7bbf183e558330d27702aa1bebf205f0e094aa
18539 Author: Bdale Garbee <bdale@gag.com>
18540 Date: Sat Apr 20 12:22:38 2013 -0600
18542 improve text in telebt turn-on script
18544 commit ff332e640b27c6be37dabef58ebac350ac2347b2
18545 Merge: b300060 87d6ed2
18546 Author: Keith Packard <keithp@keithp.com>
18547 Date: Wed Apr 17 10:41:05 2013 -0700
18549 Merge branch 'master' into droid-gps
18551 commit b3000609e4010ff4d29debe72ea1866e775af539
18552 Author: Keith Packard <keithp@keithp.com>
18553 Date: Wed Apr 17 10:38:54 2013 -0700
18555 altosdroid: Fix integer formatting in tabs
18557 Was trying to use AltosDroid.number for integers, which didn't work as
18558 it expected doubles.
18560 Signed-off-by: Keith Packard <keithp@keithp.com>
18562 commit 87d6ed24f3650981ae1ff9bfdb0298d2c01e7575
18563 Author: Keith Packard <keithp@keithp.com>
18564 Date: Tue Apr 16 17:47:17 2013 -0700
18566 altosui: Disable main deploy setting for TeleGPS
18568 Just like all of the other flight computer settings, disable the main
18569 deploy altitude configuration for TeleGPS.
18571 Signed-off-by: Keith Packard <keithp@keithp.com>
18573 commit a03aaaca60ccb4b44595e5e1c1047d07d8b6d60f
18574 Author: Keith Packard <keithp@keithp.com>
18575 Date: Tue Apr 16 17:33:42 2013 -0700
18577 altosui: Handle broken network in map tile loading
18579 Handle missing pngfiles in AltosSetMapCache by checking ImageIO.read
18582 Do incremental map tile downloading asynchronously so that the UI
18583 doesn't lock up when the network is slow
18585 Signed-off-by: Keith Packard <keithp@keithp.com>
18587 commit c2640c09c76ce32e471dcf6df83095d146bb39a2
18588 Author: Keith Packard <keithp@keithp.com>
18589 Date: Tue Apr 16 14:22:23 2013 -0700
18591 altosdroid: Check for missing values
18593 When displaying numbers, check for MISSING values and display nothing
18595 Signed-off-by: Keith Packard <keithp@keithp.com>
18597 commit d5a557004c00d1ae25da04dc63c78b816562a236
18598 Merge: 6592a5b 5b04176
18599 Author: Keith Packard <keithp@keithp.com>
18600 Date: Mon Apr 15 23:26:33 2013 -0700
18602 Merge branch 'master' into droid-gps
18604 commit 5b041769dc926f0aa18072f46abca60b11ede44b
18605 Author: Keith Packard <keithp@keithp.com>
18606 Date: Mon Apr 15 23:25:55 2013 -0700
18608 altosui: remove debug message from AltosFlightUI
18610 Signed-off-by: Keith Packard <keithp@keithp.com>
18612 commit 6592a5be127a9c95d3b2e7d5aa6ffba71c6748b9
18613 Merge: c6f85cb eba3aa9
18614 Author: Keith Packard <keithp@keithp.com>
18615 Date: Mon Apr 15 23:19:44 2013 -0700
18617 Merge branch 'master' into droid-gps
18619 commit eba3aa949decacd5592472a3cda920aa6a06d96f
18620 Author: Keith Packard <keithp@keithp.com>
18621 Date: Mon Apr 15 23:14:22 2013 -0700
18623 altoslib: Check for null state.gps before accessing it in eeprom records
18625 Used to be we'd set state.gps to garbage before seeing the first GPS
18626 record; now we leave it null, which will cause crashes for code that
18627 doesn't expect it. The code for reading and replaying eeprom data was
18628 not checking and was nicely crashing as a result.
18630 Signed-off-by: Keith Packard <keithp@keithp.com>
18632 commit c6f85cb149dff8732104521cb62b355e8a0d7148
18633 Merge: 3cd8ff1 58dd4b8
18634 Author: Keith Packard <keithp@keithp.com>
18635 Date: Sun Apr 14 20:02:10 2013 -0700
18637 Merge branch 'master' into droid-gps
18639 commit 58dd4b88fe738e005a13dfd69651853ea7f79205
18640 Author: Keith Packard <keithp@keithp.com>
18641 Date: Sun Apr 14 14:54:52 2013 -0700
18643 micropeak: Oops. Lost the call to actually start downloading data
18645 Lost when adding the 'help' text somehow; presumably a debugging issue.
18647 Signed-off-by: Keith Packard <keithp@keithp.com>
18649 commit 3cd8ff18a7546c1e251747ba26240cb130003ef1
18650 Author: Keith Packard <keithp@keithp.com>
18651 Date: Sat Apr 13 12:13:18 2013 -0700
18653 altosdroid: Update UI even if no telem has been received. Center map.
18655 This allows the receiver location to be displayed even when telemetry
18658 Center the map on the first valid location, either receiver or
18659 rocket. Update center if a significantly more precise location is received.
18661 Signed-off-by: Keith Packard <keithp@keithp.com>
18663 commit 192bc28fbe2a8613d0b42e4fb3f7674a1a50abc7
18664 Author: Keith Packard <keithp@keithp.com>
18665 Date: Sat Apr 13 11:45:23 2013 -0700
18667 altosdroid: Get rid of a couple of startup messages
18669 These are just annoying
18671 Signed-off-by: Keith Packard <keithp@keithp.com>
18673 commit e4b6fc3238ad9911fd40ef25accf82a401cb190f
18674 Author: Keith Packard <keithp@keithp.com>
18675 Date: Sat Apr 13 11:39:14 2013 -0700
18677 altosdroid: Show our position in the map tab. Squeeze to fit phones
18679 Shrink everything to fit on phones, then add phone location to the map tab
18681 Signed-off-by: Keith Packard <keithp@keithp.com>
18683 commit 2f7015afcca7c6042365d2124d3a5b7219e8e588
18684 Merge: 5077f3a 778daf0
18685 Author: Keith Packard <keithp@keithp.com>
18686 Date: Sat Apr 13 10:51:04 2013 -0700
18688 Merge branch 'master' into droid-gps
18690 commit 5077f3ad1967a33712e9ff411e3b2a0b4e1a5c4a
18691 Author: Keith Packard <keithp@keithp.com>
18692 Date: Sat Apr 13 10:50:26 2013 -0700
18694 altosdroid: Shrink text so it fits on my phone
18696 Yes, this is a hack; will try to figure out how to make it resizeable
18698 Signed-off-by: Keith Packard <keithp@keithp.com>
18700 commit 778daf0ccbd8a073da33497e33c29400d0ecc464
18701 Author: Keith Packard <keithp@keithp.com>
18702 Date: Sat Apr 13 10:39:14 2013 -0700
18704 Windows: Add all of the AltusMetrum USB IDs to telemetrum.inf
18706 This should make Windows load the driver
18708 Signed-off-by: Keith Packard <keithp@keithp.com>
18710 commit 25c01719f17be8da73a859867c14df0fc29b5441
18711 Author: Keith Packard <keithp@keithp.com>
18712 Date: Thu Apr 11 22:16:03 2013 -0700
18714 libaltos: Retry Windows serial port open five times
18718 Signed-off-by: Keith Packard <keithp@keithp.com>
18720 commit 679401fff981b675dd5a188c64e8940254588800
18721 Author: Keith Packard <keithp@keithp.com>
18722 Date: Fri Apr 12 03:09:16 2013 -0700
18724 altos: Make sure the packet format is set reasonably for radio test
18726 Dunno if this matters, but it might as well be set reasonably
18728 Signed-off-by: Keith Packard <keithp@keithp.com>
18730 commit 1430c48cfef1ef21831205f4fadd26ca6c7f5dbe
18731 Author: Keith Packard <keithp@keithp.com>
18732 Date: Fri Apr 12 00:55:59 2013 -0700
18734 altoslib: Remove spurious debug message
18736 Signed-off-by: Keith Packard <keithp@keithp.com>
18738 commit cdbf8053658c71a657005af68202023d0b4af1fe
18739 Author: Keith Packard <keithp@keithp.com>
18740 Date: Fri Apr 12 02:42:37 2013 -0700
18742 altos: Don't include bufio debug commands by default
18744 We shouldn't need these
18746 Signed-off-by: Keith Packard <keithp@keithp.com>
18748 commit c54bd59780275ece87eafb8143cf0637b35e794c
18749 Author: Keith Packard <keithp@keithp.com>
18750 Date: Fri Apr 12 02:35:15 2013 -0700
18752 altos: Stick a mutex around FAT operations
18754 This allows the command line and logging operations to occur safely in parallel
18756 Signed-off-by: Keith Packard <keithp@keithp.com>
18758 commit 7e6e2ca60c65a4fe2bee0bd8b9b89d45a7dbcfb3
18759 Author: Keith Packard <keithp@keithp.com>
18760 Date: Fri Apr 12 01:55:33 2013 -0700
18762 altos: Delay while waking up SD card a bit
18764 This seems to make bringing the card from idle to ready mode more
18765 reliable. If you spam the card with requests, it will eventually
18766 whinge and shut down communications.
18768 Signed-off-by: Keith Packard <keithp@keithp.com>
18770 commit 19ef593be9ff3f329e44472735d90c80129d2795
18771 Author: Keith Packard <keithp@keithp.com>
18772 Date: Fri Apr 12 01:04:55 2013 -0700
18774 altosdroid: The Map already draws our location; no receiver marker needed
18776 Signed-off-by: Keith Packard <keithp@keithp.com>
18778 commit 1ec6fb3b9cec0f864d6e65d0cc6b4dd42edd3e16
18779 Author: Keith Packard <keithp@keithp.com>
18780 Date: Fri Apr 12 01:00:36 2013 -0700
18782 altosdroid: Check state.gps != null before using it
18786 Signed-off-by: Keith Packard <keithp@keithp.com>
18788 commit 02243463adbdfb860f69580f544da9026dc7cbd4
18789 Author: Keith Packard <keithp@keithp.com>
18790 Date: Fri Apr 12 00:55:59 2013 -0700
18792 altoslib: Remove spurious debug message
18794 Signed-off-by: Keith Packard <keithp@keithp.com>
18796 commit 9212ce268f3a4a9f3f019f23f6eef8b57207d340
18797 Author: Keith Packard <keithp@keithp.com>
18798 Date: Fri Apr 12 00:19:24 2013 -0700
18800 altosdroid: Compute course from android device to rocket, display it
18802 Signed-off-by: Keith Packard <keithp@keithp.com>
18804 commit f02bb1df132443fc27b69f23f382ea87e610f533
18805 Author: Keith Packard <keithp@keithp.com>
18806 Date: Thu Apr 11 23:56:47 2013 -0700
18808 altoslib: Add range and elevation to AltosGreatCircle
18810 Move the computations from AltosState here so they can be re-used elsewhere.
18812 Signed-off-by: Keith Packard <keithp@keithp.com>
18814 commit 9a8cc23de5776ea3fa2bdc96cbe63422eb555d63
18815 Author: Keith Packard <keithp@keithp.com>
18816 Date: Thu Apr 11 22:39:14 2013 -0700
18818 altosdroid: Mike was right -- only need one LocationListener
18820 I mis-read the docs and thought we needed two listeners, one for GPS
18821 and one for network position. Looks like we don't
18823 Signed-off-by: Keith Packard <keithp@keithp.com>
18825 commit 83ce46c73b0e876f9f630943af19ea97b3a21d3c
18826 Author: Keith Packard <keithp@keithp.com>
18827 Date: Thu Apr 11 22:34:36 2013 -0700
18829 altosdroid: Send LOCATION and CRC_ERROR messages to UI.
18831 This collects all position changes and crc error increments and sends
18832 them along to the UI for presentation.
18834 Signed-off-by: Keith Packard <keithp@keithp.com>
18836 commit 1f88d345c407e409611448d0e8813ab5a6de0a0b
18837 Author: Keith Packard <keithp@keithp.com>
18838 Date: Thu Apr 11 22:16:25 2013 -0700
18840 altosdroid: Hook up the position listeners
18842 Signed-off-by: Keith Packard <keithp@keithp.com>
18844 commit 81730670b6848bebb2c6a8ac7813419112f2779a
18845 Author: Keith Packard <keithp@keithp.com>
18846 Date: Tue Apr 9 14:53:25 2013 -0700
18848 doc: Add an outline of an AltosDroid chapter
18850 Not much content yet, but I think this is pretty much the sections we need
18852 Signed-off-by: Keith Packard <keithp@keithp.com>
18854 commit 07fb6efc54b8575627572a2113bdbc62914bafb5
18855 Author: Keith Packard <keithp@keithp.com>
18856 Date: Tue Apr 9 00:38:25 2013 -0700
18858 altoslib/altosui: Adapt monitor idle to new AltosListenerState
18860 Move the receiver battery monitoring to the new spot
18862 Signed-off-by: Keith Packard <keithp@keithp.com>
18864 commit 398c02b945a58634c8932f07df2c2be8438da7d1
18865 Author: Keith Packard <keithp@keithp.com>
18866 Date: Tue Apr 9 00:28:05 2013 -0700
18868 altoslib/altosui: Carry receiver status around in AltosListenerState
18870 This moves the crc_errors into the new structure and adds a receiver
18871 battery voltage value there as well. Now the receiver status can be
18872 monitored separately from the flight status. That also means that code
18873 receiving state updates should be prepared to accept missing listener
18874 or flight state values.
18876 Signed-off-by: Keith Packard <keithp@keithp.com>
18878 commit 08eb1e3e1abb1aa4f5ea92b781a2ff8f480006c5
18879 Author: Keith Packard <keithp@keithp.com>
18880 Date: Mon Apr 8 17:42:18 2013 -0700
18882 altos: Monitor battery voltage on telebt
18884 Signed-off-by: Keith Packard <keithp@keithp.com>
18886 commit 6ba0df9b440b69bf5bc5f4e435b431adf303fee2
18887 Merge: 1d3ab47 28adf55
18888 Author: Bdale Garbee <bdale@gag.com>
18889 Date: Mon Apr 8 18:02:37 2013 -0600
18891 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
18893 commit 28adf5541354715b185dbb45b28c97c7d9cf8bcd
18894 Author: Keith Packard <keithp@keithp.com>
18895 Date: Mon Apr 8 16:48:40 2013 -0700
18897 altos: Create telebt-v1.0 product. Remove old telebt products
18899 Signed-off-by: Keith Packard <keithp@keithp.com>
18901 commit 1d3ab47d82fe005ab6854386c0ffa5771ee49bf6
18902 Author: Keith Packard <keithp@keithp.com>
18903 Date: Mon Apr 8 16:48:40 2013 -0700
18905 altos: Create telebt-v1.0 product. Remove old telebt products
18907 Signed-off-by: Keith Packard <keithp@keithp.com>
18909 commit 0c0dc761095a5a77c87c3b4dcd1d42a4e79f6604
18910 Author: Keith Packard <keithp@keithp.com>
18911 Date: Sat Apr 6 23:48:36 2013 -0700
18913 altos: Try RDF mode for TX calibration
18915 Trying to get the radio to stop modulating the carrier when
18916 calibrating the radio, we'll try RDF mode which says no preamble or
18917 sync data. This might shift the frequency though?
18919 Signed-off-by: Keith Packard <keithp@keithp.com>
18921 commit 30c397296bcdaceb4c2c9d0509dc591b489ece02
18922 Author: Keith Packard <keithp@keithp.com>
18923 Date: Tue Apr 2 17:44:06 2013 -0700
18925 altosui: Graph TeleMini flights without crashing
18927 Adding maps to the graph UI failed to check for missing GPS data in a
18928 couple of places causing crashes when fed a TeleMini file.
18930 Signed-off-by: Keith Packard <keithp@keithp.com>
18932 commit 67b8bdb4ea8c22688d4f18416593346585595cfa
18933 Author: Keith Packard <keithp@keithp.com>
18934 Date: Tue Apr 2 17:29:40 2013 -0700
18936 altosui: Display current GPS in 'pad' tab for 'startup' staten
18938 This is the state for telegps, so just display the current GPS info as
18939 we don't know where it started at.
18941 Signed-off-by: Keith Packard <keithp@keithp.com>
18943 commit 907cc6c50755c0d19b93c15678d6f3022a6ee10b
18944 Author: Keith Packard <keithp@keithp.com>
18945 Date: Tue Apr 2 16:48:05 2013 -0700
18947 altosui: Hide flight-related tabs for telegps
18949 Products without a flight state don't need ascent/descent/landed tabs.
18951 Signed-off-by: Keith Packard <keithp@keithp.com>
18953 commit e747156d0ea4b62eea30a8f486ee105ee35dcaf5
18954 Author: Keith Packard <keithp@keithp.com>
18955 Date: Tue Apr 2 16:47:07 2013 -0700
18957 altosui: Don't display missing sensor data
18959 For devices without sensors, don't display temperature, barometric and
18960 accelerometer-derived values.
18962 Signed-off-by: Keith Packard <keithp@keithp.com>
18964 commit 997cdef3fe04acdd566d287e70981f7b7934d0c8
18965 Author: Keith Packard <keithp@keithp.com>
18966 Date: Tue Apr 2 16:44:58 2013 -0700
18968 altoslib: Make any incoming telem packet update the RSSI value
18970 Every packet has RSSI info, so use the latest one available. This
18971 makes telegps RSSI available as it never sends sensor packets (having
18974 Signed-off-by: Keith Packard <keithp@keithp.com>
18976 commit 0cd203e418e73a1f11460425985b7575c2f0a76c
18977 Author: Keith Packard <keithp@keithp.com>
18978 Date: Tue Apr 2 16:43:53 2013 -0700
18980 Set telegps USB id to 0025
18982 It was accidentally using the same ID as megadongle...
18984 Signed-off-by: Keith Packard <keithp@keithp.com>
18986 commit 96c32125a780ad6b39c015f4abbae07fead68582
18987 Author: Keith Packard <keithp@keithp.com>
18988 Date: Tue Apr 2 16:41:29 2013 -0700
18990 altos: Shorten SD initialization timeouts.
18992 This makes failure when no card is present much quicker.
18994 Signed-off-by: Keith Packard <keithp@keithp.com>
18996 commit 985df526ec142258ef990d0b55b0a14e13c099b4
18997 Author: Keith Packard <keithp@keithp.com>
18998 Date: Mon Apr 1 02:39:35 2013 -0700
19000 altos: Horrible kludge -- disable radio while talking with SD card
19002 The SD card really doesn't like the RFI generated by our enormous
19003 radio, so just lock the radio out while working with the card.
19005 Signed-off-by: Keith Packard <keithp@keithp.com>
19007 commit 14c63f94f36a95272d91695039abf54efb423a91
19008 Author: Keith Packard <keithp@keithp.com>
19009 Date: Mon Apr 1 02:10:14 2013 -0700
19011 altos: Add defines for the specific pins used for telegps SPI
19013 These aren't needed at this point, but who knows?
19015 Signed-off-by: Keith Packard <keithp@keithp.com>
19017 commit b34370cea662eb245e43aca20a6650b84b55ef6f
19018 Author: Keith Packard <keithp@keithp.com>
19019 Date: Mon Apr 1 02:08:18 2013 -0700
19021 altos: Retry SD card I/O. Use time for timeouts instead of counts
19023 Sometimes I/O operations may fail; give the card a chance and retry
19024 the operation in case it works the next time.
19026 Replace the loop counts with loops that check the clock so that
19027 they'll have consistent timeouts even if the CPU or SPI speed changes.
19029 Signed-off-by: Keith Packard <keithp@keithp.com>
19031 commit b3a41bed39ec1abfc3ab74e9be7dd393e975542b
19032 Author: Keith Packard <keithp@keithp.com>
19033 Date: Mon Apr 1 02:07:06 2013 -0700
19035 altos: Provide build hooks for sampling profiler in telegps
19037 Might prove useful if the CPU is ever doing anything?
19039 Signed-off-by: Keith Packard <keithp@keithp.com>
19041 commit fae116fbebb9658fe15690ff43dfe8568a58c2a9
19042 Author: Keith Packard <keithp@keithp.com>
19043 Date: Mon Apr 1 02:06:03 2013 -0700
19045 altos: Add a FAT test that re-writes the same file multiple times
19047 This caught a bunch of FAT cluster chain allocation bugs.
19049 Signed-off-by: Keith Packard <keithp@keithp.com>
19051 commit 79d01a571935138b24b86a7181307ee014d248ed
19052 Author: Keith Packard <keithp@keithp.com>
19053 Date: Mon Apr 1 02:03:57 2013 -0700
19055 altos: Support open on multiple simultaneous FAT files
19057 Need to be able to see the contents of a log file, even if the logger
19060 Signed-off-by: Keith Packard <keithp@keithp.com>
19062 commit 0838b6c8797b84cf8df8f92ee20fb6ae79e434d7
19063 Author: Keith Packard <keithp@keithp.com>
19064 Date: Mon Apr 1 02:02:14 2013 -0700
19066 altos: Make sure FAT cluster allocation works for size zero files
19068 There were some rounding errors mis-computing the number of clusters
19069 needed, and the logic to figure out how to re-connect a chain was broken.
19071 Signed-off-by: Keith Packard <keithp@keithp.com>
19073 commit 76bd204de744c34e5cbf6efa93adb89bc2cb08b3
19074 Author: Keith Packard <keithp@keithp.com>
19075 Date: Mon Apr 1 02:00:21 2013 -0700
19077 altos: let FAT tracing work in ao_fat_test as needed
19079 This allows the FAT DBG hooks to be enabled even if some other module
19082 Signed-off-by: Keith Packard <keithp@keithp.com>
19084 commit a764bf06d0975cbf1620b079351c7437053ea1a8
19085 Author: Keith Packard <keithp@keithp.com>
19086 Date: Mon Apr 1 01:58:37 2013 -0700
19088 altos: Flush the on-board mega log after every sample interval.
19090 SPI flash parts don't need flushing, but the SD card does. Make sure
19091 the SD card contents are sane after every logging interval has passed
19092 by flushing all dirty blocks to the device.
19094 Signed-off-by: Keith Packard <keithp@keithp.com>
19096 commit c2de64b10894b366398a8b37ebd2305d9be46d46
19097 Author: Keith Packard <keithp@keithp.com>
19098 Date: Sun Mar 31 16:11:27 2013 -0700
19100 altos: Create the log file if it doesn't already exist
19102 open will return failure unless the file already exists.
19104 Signed-off-by: Keith Packard <keithp@keithp.com>
19106 commit 659a6915f5ba5129096e55ccc04c975d216546ae
19107 Author: Keith Packard <keithp@keithp.com>
19108 Date: Sun Mar 31 16:10:33 2013 -0700
19110 altos: Make ao_fat_readdir return real error values instead of 1/0
19112 This way, we can distinguish between 'something bad happened' and
19113 'you're at the end of the directory'.
19115 Signed-off-by: Keith Packard <keithp@keithp.com>
19117 commit 182ceaac7d91dc6e9ebac6455d5de0c10687796b
19118 Author: Keith Packard <keithp@keithp.com>
19119 Date: Sun Mar 31 13:55:16 2013 -0700
19121 altos: Increase SD card timeout at startup time
19123 Sometimes the SD card takes 'a while' to go into idle mode at first
19124 power up. Just hang around waiting for a long time.
19126 Signed-off-by: Keith Packard <keithp@keithp.com>
19128 commit d813566cdc4d43a43ed988dde4a3ceeccf24efe6
19129 Author: Keith Packard <keithp@keithp.com>
19130 Date: Sun Mar 31 12:46:41 2013 -0700
19132 altos: Fix command-line FAT filename parsing
19134 Pad extension with spaces
19136 Signed-off-by: Keith Packard <keithp@keithp.com>
19138 commit db01557ce493c435db177fda78653697ba2afa51
19139 Author: Keith Packard <keithp@keithp.com>
19140 Date: Sat Mar 23 02:10:38 2013 -0700
19142 ao-tools/ao-stmload: Be smarter about ELF parsing. Retry open on failure.
19144 Figuring out what goes where is tricky; turns out we want to pull all
19145 of the sections that map inside any program area that is supposed to
19146 be loaded from the file.
19148 So, we walk the program headers, then walk all of the section headers
19149 looking for those that suck data from the same portion of the
19150 file. Compute where in ROM each relevant section goes and build a full
19151 ROM image in memory using that.
19153 This patch also adds code to close and re-open the device if the first
19154 open failed to do what we want. Much nicer to have the computer figure
19155 out when the open succeeded rather than having people re-run the app.
19157 Signed-off-by: Keith Packard <keithp@keithp.com>
19159 commit 144b44e13ce3361ff59cbb555e84d542455a4e17
19160 Author: Keith Packard <keithp@keithp.com>
19161 Date: Sun Mar 31 12:39:32 2013 -0700
19163 altos: Unmount file system after each testing pass in ao_fat_test
19165 Otherwise, we use stale data and 'bad things' happen.
19167 Signed-off-by: Keith Packard <keithp@keithp.com>
19169 commit a70139c9a8a177df8f20f525703b13c0aec0fbc7
19170 Author: Keith Packard <keithp@keithp.com>
19171 Date: Sun Mar 31 12:29:37 2013 -0700
19173 altos: Don't add fat commands when building ao_fat_test
19175 Signed-off-by: Keith Packard <keithp@keithp.com>
19177 commit 8b2f211758dfa97230a730b8c4b31e0e711c19c9
19178 Author: Keith Packard <keithp@keithp.com>
19179 Date: Sun Mar 24 15:04:57 2013 -0700
19181 altos/stm: Always check for idle IN buffer before sending
19183 Unlike the AVR and CC1111 USB drivers, the STM usb driver queues IN
19184 bytes in a local buffer instead of in the driver; this means that the
19185 driver is queuing bytes while the previous IN packet is queued for the
19186 host, which allows for overlapping execution.
19188 It also means that when the local buffer is full, we must check to see
19189 if the host has picked up the previous IN packet before trying to
19190 queue another IN packet for transmission. This is done by always
19191 waiting for the IN buffer to be ready before sending data.
19193 Signed-off-by: Keith Packard <keithp@keithp.com>
19195 commit de199601a177fc2d45ad9bd7357111111844d40a
19196 Author: Keith Packard <keithp@keithp.com>
19197 Date: Sun Mar 24 15:03:59 2013 -0700
19199 altos/stm: Add debugging mechanism to STM USB driver
19201 This adds a pile of debugging hooks to the USB driver to try and
19202 isolate various lockup-related issues. It's all disabled by default,
19205 Signed-off-by: Keith Packard <keithp@keithp.com>
19207 commit 4f1f3e836393304434130d362771a39f6f8f859a
19208 Author: Keith Packard <keithp@keithp.com>
19209 Date: Sun Mar 24 15:00:20 2013 -0700
19211 altos: Do not release interrupts from any pollchar function
19213 getchar relies on interrupts being blocked across the pollchar calls
19214 and into the sleep call or it may go to sleep with data pending.
19216 This prefixes all pollchar functions with _ to indicate that they are
19217 to be called with interrupts blocked and eliminates all interrupt
19218 manipulation calls from within the pollchar functions.
19220 Signed-off-by: Keith Packard <keithp@keithp.com>
19222 commit 7afcec1a1dce140dfa569469df4ef42ed407a742
19223 Author: Keith Packard <keithp@keithp.com>
19224 Date: Sun Mar 31 12:23:31 2013 -0700
19226 altos: Add sdcard read/write tracing
19228 This just dumps info in trace mode about read and write commands
19230 Signed-off-by: Keith Packard <keithp@keithp.com>
19232 commit a0595d94c7deea29d9e3d4bcbc106b9bed5ee103
19233 Author: Keith Packard <keithp@keithp.com>
19234 Date: Sun Mar 31 12:22:28 2013 -0700
19236 altos: Move fat mount information to separate command.
19238 This makes the mount report precise error information and then prints
19239 that with the 'M' command.
19241 Signed-off-by: Keith Packard <keithp@keithp.com>
19243 commit a0628541e1bfc3e4a122cc824188ed53fddf733e
19244 Author: Keith Packard <keithp@keithp.com>
19245 Date: Sun Mar 31 12:21:03 2013 -0700
19247 altos: Disable CC115L debug commands
19249 now that it appears to work, leave these disabled by default
19251 Signed-off-by: Keith Packard <keithp@keithp.com>
19253 commit d8826b1ad5487de9345b7dcaf6c75a45117ff538
19254 Author: Keith Packard <keithp@keithp.com>
19255 Date: Sun Mar 31 10:35:47 2013 -0700
19257 altos: Add SD card writing function
19259 Now that the FAT code seems to be operational, go back and add
19262 Signed-off-by: Keith Packard <keithp@keithp.com>
19264 commit 649999863c7228ead0225968752d068dc0d30091
19265 Author: Keith Packard <keithp@keithp.com>
19266 Date: Sat Mar 30 01:33:49 2013 -0700
19268 altos: Add logging and telem to telegps
19270 This turns on telemetry, APRS, RDF and data logging for telegps.
19272 Data is logged as soon as GPS has a date to create the right
19273 filename, using files of the form YYYYMMDD.LOG which just barely fits
19276 Telemetry/RDF/APRS are all separately controllable.
19278 Signed-off-by: Keith Packard <keithp@keithp.com>
19280 commit b3d8956df3a3ecb3918b5db4d78b057d68541c33
19281 Author: Keith Packard <keithp@keithp.com>
19282 Date: Sat Mar 30 01:32:30 2013 -0700
19284 altos: Export ao_fat_sync and ao_fat_full functions
19286 ao_fat_sync() flushes the bufio data to disk along with any fsinfo
19287 changes. ao_fat_full() returns whether the file system is full.
19289 Signed-off-by: Keith Packard <keithp@keithp.com>
19291 commit 7455a892e8bf5402e7ff2c4bd2ddad05dfe76638
19292 Author: Keith Packard <keithp@keithp.com>
19293 Date: Sat Mar 30 01:31:12 2013 -0700
19295 altos: Lock cc115l radio mutex when using global radio values
19297 This moves the locking up above the global state variable uses so that
19298 multiple radio users (as if we had any) won't collide.
19300 Signed-off-by: Keith Packard <keithp@keithp.com>
19302 commit bd32140df2a595ce66d603b98516bae519327c5d
19303 Author: Keith Packard <keithp@keithp.com>
19304 Date: Sat Mar 30 01:30:18 2013 -0700
19306 altos: Configure cc115l sync byte count for each radio mode
19308 two sync bytes for packet mode, disable sync for rdf/aprs mode.
19310 Signed-off-by: Keith Packard <keithp@keithp.com>
19312 commit 93a9aa703a0173e13b327ed432e6d52e90ebfa1b
19313 Author: Keith Packard <keithp@keithp.com>
19314 Date: Fri Mar 29 17:05:36 2013 -0700
19316 altos: Get CC115L radio working.
19318 This involved figuring out which GPIO signal would reliably indicate
19319 that the transmitter was finished; I ended up using the PA_PD bit for
19322 This also converts all of the radio users to the long packet support
19323 as the CC115L has only a 64-byte fifo, not large enough to hold either
19324 an RDF tone or a regular AltOS telemetry packet.
19326 This also renames the public API for sending APRS packets from
19327 ao_radio_send_lots to ao_radio_send_aprs, which is at least more
19328 accurate. The workings of that API haven't changed, just the name.
19330 Signed-off-by: Keith Packard <keithp@keithp.com>
19332 commit 9aeed244879f90b5b6dab1c7ca095cc001b03fe5
19333 Author: Keith Packard <keithp@keithp.com>
19334 Date: Fri Mar 29 12:13:59 2013 -0700
19336 altos: Add temporary RF power settings
19338 These expose the raw cc115l and rfpa0133 register settings so that we
19339 can calibrate them against measured power outputs.
19341 I've tested them to verify that they change how much power the board
19342 consumes, so they're clearly doing something...
19344 Signed-off-by: Keith Packard <keithp@keithp.com>
19346 commit 86e1039e14304ac13db540f2ee3afd4ff170b8b4
19347 Author: Keith Packard <keithp@keithp.com>
19348 Date: Fri Mar 29 00:32:23 2013 -0700
19350 altos: Add FAT32 support. And lots more testing.
19352 Generalizes the FAT code to deal with either 16-bit or 32-bit
19353 versions. The testing code now runs over a variety of disk images to
19354 check for compatibility on all of them.
19356 Signed-off-by: Keith Packard <keithp@keithp.com>
19358 commit 44e418bbecd3a3deae942803141cf115d92f29d2
19359 Author: Keith Packard <keithp@keithp.com>
19360 Date: Thu Mar 28 17:38:14 2013 -0700
19362 altos: seek forward on FAT cluster chain instead of restarting
19364 This improves sequential file performance by taking advantage of any
19365 previous cached cluster/offset pair and starting from there when the
19366 cluster changes rather than starting from scratch at the begining again.
19368 Signed-off-by: Keith Packard <keithp@keithp.com>
19370 commit 8101e4af199a3d79bff434f788cce9f97aeac53a
19371 Author: Keith Packard <keithp@keithp.com>
19372 Date: Thu Mar 28 16:57:02 2013 -0700
19374 altos: Add a simple cache for the FAT position->cluster computation
19376 This improves read/write performance with large files by not
19377 re-walking the cluster chain for every operation
19379 Signed-off-by: Keith Packard <keithp@keithp.com>
19381 commit c7b606e93a4e4fbd2c0e883352ed74619ee24cf7
19382 Author: Keith Packard <keithp@keithp.com>
19383 Date: Thu Mar 28 16:05:24 2013 -0700
19385 altos: Clean up fat driver API. Improve fat test
19387 Make FAT api provide reasonable error return values, change the tests
19388 to write and then read a pile of files, checking that the contents are
19389 correct (using md5sum).
19391 Signed-off-by: Keith Packard <keithp@keithp.com>
19393 commit d1fe0654b45cc8f944394308cf29945b537becc4
19394 Author: Keith Packard <keithp@keithp.com>
19395 Date: Thu Mar 28 15:55:35 2013 -0700
19397 altos: Add sanity checking to busy counts in bufio driver
19399 Make sure the busy counts don't underflow or overflow.
19401 Signed-off-by: Keith Packard <keithp@keithp.com>
19403 commit 6fe32e0fc407522101e805cf2653253cb3cee291
19404 Author: Keith Packard <keithp@keithp.com>
19405 Date: Wed Mar 27 22:11:53 2013 -0700
19407 altosui: Don't deref null pyros when saving altimeter config
19409 The check for no pyro config is to compare npyros against zero rather
19410 than check the length of the pyros array as the latter may be null.
19412 Signed-off-by: Keith Packard <keithp@keithp.com>
19414 commit 985cd22b941415b1ae2709ae1ab6b60c3d815ec1
19415 Author: Keith Packard <keithp@keithp.com>
19416 Date: Wed Mar 27 18:43:42 2013 -0700
19418 altos: Use FTDW, clear DATA bit. Disable backup write protection
19420 The newer(?) chips in telegps didn't like the previous programming
19421 scheme, so go back to fixed time for write, which does an implicit
19422 erase before every write. Also clear the DATA bit, which is only
19423 needed for double word erase/programming.
19425 Signed-off-by: Keith Packard <keithp@keithp.com>
19427 commit 4a68878a66508e6f1523cd813b2e37bcf2e90ab3
19428 Author: Keith Packard <keithp@keithp.com>
19429 Date: Wed Mar 27 01:25:24 2013 -0700
19431 altos: Teleshield has a radio, set HAS_RADIO in ao_pins.h
19433 Otherwise, lots of random code won't know about the radio..
19435 Signed-off-by: Keith Packard <keithp@keithp.com>
19437 commit 561175afebc63ec3d2f8f7305235c9812ceaf501
19438 Author: Keith Packard <keithp@keithp.com>
19439 Date: Wed Mar 27 01:15:04 2013 -0700
19441 altos: Add new panic flag for bufio misuse
19443 Allow the bufio code to signal a fatal error if someone misuses the API
19445 Signed-off-by: Keith Packard <keithp@keithp.com>
19447 commit bd43955ff0c4d39a685b79e91cb62898a5f1b875
19448 Author: Keith Packard <keithp@keithp.com>
19449 Date: Wed Mar 27 01:14:15 2013 -0700
19451 altos: Hook up the FAT16 and SD card support to telegps
19453 Signed-off-by: Keith Packard <keithp@keithp.com>
19455 commit e14834817f78a04b4d9b44a8373119dffd42c966
19456 Author: Keith Packard <keithp@keithp.com>
19457 Date: Wed Mar 27 01:12:33 2013 -0700
19459 altos: Add SDCARD and FAT16 filesystem support
19461 This adds a fairly primitive FAT16 file system implementation
19462 along with support for SD cards.
19464 Signed-off-by: Keith Packard <keithp@keithp.com>
19466 commit 747114786512339211d4981a7828c8c6f1f46c20
19467 Author: Keith Packard <keithp@keithp.com>
19468 Date: Tue Mar 26 14:28:37 2013 -0700
19470 altos: Fix config to not abort radio recv when no recv is available
19472 Use the new radio recv define to skip disabling the receiver when
19473 there isn't a receiver.
19475 Signed-off-by: Keith Packard <keithp@keithp.com>
19477 commit 237e853b820b01409562b93b82684e5147286806
19478 Author: Keith Packard <keithp@keithp.com>
19479 Date: Tue Mar 26 14:27:46 2013 -0700
19481 altos: Allow radio recv and xmit to be separately configured
19483 The CC115L is xmit only, so split out the functions and provide
19484 defines to check for xmit or recv separately as needed.
19486 Signed-off-by: Keith Packard <keithp@keithp.com>
19488 commit 4d187460bdcb97bf6d0a3550e4e03c4c223e4cc1
19489 Author: Keith Packard <keithp@keithp.com>
19490 Date: Tue Mar 26 14:26:38 2013 -0700
19492 altos/stm: Ensure SPI always sends 0xff during receive
19494 SD cards require 0xff when fetching data
19496 Signed-off-by: Keith Packard <keithp@keithp.com>
19498 commit 136ca0922e968d650e9e420a47d228611a3cb45e
19499 Author: Keith Packard <keithp@keithp.com>
19500 Date: Tue Mar 26 14:25:48 2013 -0700
19502 altos: Improve CC115L driver. Generates carrier now.
19504 Still no data, but at least the carrier comes up on frequency now.
19506 Signed-off-by: Keith Packard <keithp@keithp.com>
19508 commit 4889b33af9700b9d872364f0cadaf9425cf84a7d
19509 Author: Keith Packard <keithp@keithp.com>
19510 Date: Tue Mar 26 14:24:45 2013 -0700
19512 altos: Add RFPA0133 amplifier driver
19514 No configuration of power level yet, just the bare driver.
19516 Signed-off-by: Keith Packard <keithp@keithp.com>
19518 commit 6fe1e32f5361e901b88b63a30f070e67d460ada1
19519 Author: Keith Packard <keithp@keithp.com>
19520 Date: Sun Mar 24 23:52:14 2013 -0700
19522 altos/telegps: Hook up cc115l driver
19524 Doesn't actually do anything yet, but should initialize the chip at least
19526 Signed-off-by: Keith Packard <keithp@keithp.com>
19528 commit 4ddfb3ea07c2073f8c4d79feaf262c9fb910cfce
19529 Author: Keith Packard <keithp@keithp.com>
19530 Date: Sun Mar 24 23:51:11 2013 -0700
19532 altos: Add cc115l driver (untested)
19534 Includes support for sending telemetry, RDF and APRS tones
19536 Signed-off-by: Keith Packard <keithp@keithp.com>
19538 commit 15bc83a0eaaa9a43d67fdc3e9f412d5b2c1f06dd
19539 Author: Keith Packard <keithp@keithp.com>
19540 Date: Wed Mar 20 23:22:37 2013 -0700
19542 ao-tools: Make library support µPusb
19544 Set baud rate to 9600, look for FTDI-style names
19546 Signed-off-by: Keith Packard <keithp@keithp.com>
19548 commit 50dd268a715224a01f8a6b481670a4ae6621cb28
19549 Author: Keith Packard <keithp@keithp.com>
19550 Date: Wed Mar 20 23:21:37 2013 -0700
19552 Add telegps initial version
19554 Just lights up the GPS and USB
19556 Signed-off-by: Keith Packard <keithp@keithp.com>
19558 commit 548cf57d5a5ea323bbfc3605b44c23fc48dec96b
19559 Author: Keith Packard <keithp@keithp.com>
19560 Date: Mon Mar 18 22:12:48 2013 -0700
19562 ao-tools: add ao-dump-up
19564 Dumps out a µP log. Useful for µPusb bring-up
19566 Signed-off-by: Keith Packard <keithp@keithp.com>
19568 commit d171d10d97307a1a1a62e660e9194121b79a09be
19569 Author: Keith Packard <keithp@keithp.com>
19570 Date: Mon Mar 11 18:16:55 2013 -0700
19572 micropeak: Improve download docs and UI
19574 Add text explaining that the LED and phototransistor must be
19575 touching to both the doc and the UI.
19577 Signed-off-by: Keith Packard <keithp@keithp.com>
19579 commit 90ee11542b111befa0e96e27292dc548e5c37396
19580 Merge: 97efce5 d7973de
19581 Author: Keith Packard <keithp@keithp.com>
19582 Date: Sun Mar 10 11:43:06 2013 -0700
19584 Merge remote-tracking branch 'mjb/altosdroid'
19586 commit 97efce5f7ff227aaa8990529217d3d10db3443dc
19587 Author: Keith Packard <keithp@keithp.com>
19588 Date: Sun Mar 10 11:41:49 2013 -0700
19590 altos: re-enable optimization for stm-demo. remove unused bits
19592 This makes stm-demo run on the discovery board again.
19594 Signed-off-by: Keith Packard <keithp@keithp.com>
19596 commit d7973de32adff5402844cc1e1da3eced05265074
19597 Author: Mike Beattie <mike@ethernal.org>
19598 Date: Sun Mar 10 23:28:26 2013 +1300
19600 altosdroid: Add map polyline between pad and rocket
19602 Signed-off-by: Mike Beattie <mike@ethernal.org>
19604 commit b691fc48f5e879045e68e070162af56cd08f03b4
19605 Author: Mike Beattie <mike@ethernal.org>
19606 Date: Sun Mar 10 23:27:28 2013 +1300
19608 altosdroid: Add rocket and pad map markers
19610 Signed-off-by: Mike Beattie <mike@ethernal.org>
19612 commit b7c82b867b12ca016164725f3736bc5b55048999
19613 Author: Mike Beattie <mike@ethernal.org>
19614 Date: Sun Mar 10 20:40:13 2013 +1300
19616 altosdroid: programmatically create map fragment
19618 * Allows reliable fetching of a GoogleMap handle.
19619 * Set map options, initial location (NCR North for now, temporarily)
19620 * Add some info fields below map, and update them accordingly
19622 Signed-off-by: Mike Beattie <mike@ethernal.org>
19624 commit 8adadf6bd2ba623642675e4beafac4ac98b1916d
19625 Merge: d029aca 0c0c6d6
19626 Author: Mike Beattie <mike@ethernal.org>
19627 Date: Sun Mar 10 20:24:56 2013 +1300
19629 Merge branch 'master' into altosdroid
19631 commit 0c0c6d60cdce39582fa5350e9b016a08e76f27a1
19632 Author: Mike Beattie <mike@ethernal.org>
19633 Date: Sun Mar 10 20:24:15 2013 +1300
19635 altosdroid: Add SDK checks to configure.ac
19637 Signed-off-by: Mike Beattie <mike@ethernal.org>
19639 commit c2d966a8ca9dcf6ccf5c268c616cf1384d45002d
19640 Author: Mike Beattie <mike@ethernal.org>
19641 Date: Sun Mar 10 20:22:51 2013 +1300
19643 altosdroid: adjust clean targets to get rid of automake warning
19645 Signed-off-by: Mike Beattie <mike@ethernal.org>
19647 commit 988e9079e20133554acfecc74a109195688c2752
19648 Author: Mike Beattie <mike@ethernal.org>
19649 Date: Sun Mar 10 20:22:09 2013 +1300
19651 ao-tools: Add ao-edit-telem to .gitignore
19653 Signed-off-by: Mike Beattie <mike@ethernal.org>
19655 commit d029acad6a992be9b7b4498e70605f8a1e1a4ef6
19656 Merge: eba7b2e 72c5b14
19657 Author: Mike Beattie <mike@ethernal.org>
19658 Date: Sun Mar 10 19:07:01 2013 +1300
19660 Merge branch 'master' into altosdroid
19662 commit 72c5b1429bdfd6e9d2185bad7d0adb281fdf659a
19663 Author: Keith Packard <keithp@keithp.com>
19664 Date: Sat Mar 9 20:40:52 2013 -0800
19666 ao-tools: Add ao-edit-telem
19668 This lets you edit a telemetry file. The only current editing
19669 available is to change the pad location, allowing a flight to be
19670 replayed anywhere in the world.
19672 Signed-off-by: Keith Packard <keithp@keithp.com>
19674 commit 9b460d38bc2685bca7f530b7749c0e0381f6264c
19675 Author: Keith Packard <keithp@keithp.com>
19676 Date: Sat Mar 9 20:39:31 2013 -0800
19678 ao-tools/lib: Add cc_telemetry_unparse
19680 This takes a telemetry structure and generates a string version
19682 Signed-off-by: Keith Packard <keithp@keithp.com>
19684 commit 0803da851e2e061affc172fdde6301652d1be755
19685 Author: Keith Packard <keithp@keithp.com>
19686 Date: Sat Mar 9 20:37:38 2013 -0800
19688 altosui: Add N/S and E/W to info table lat/lon values
19690 Signed-off-by: Keith Packard <keithp@keithp.com>
19692 commit eba7b2ef8ef23bdb61b0390e47be6f27ffde31dc
19693 Author: Mike Beattie <mike@ethernal.org>
19694 Date: Fri Mar 8 19:41:32 2013 +1300
19696 altosdroid: fix side-to-side scrolling in map tab
19698 Signed-off-by: Mike Beattie <mike@ethernal.org>
19700 commit 84d35e4cbd7ea2f681c43496b9b9db84f9dd923f
19701 Merge: 760b1f0 e0d9128
19702 Author: Keith Packard <keithp@keithp.com>
19703 Date: Thu Mar 7 13:00:44 2013 -0800
19705 Merge remote-tracking branch 'mjb/altosdroid'
19707 commit e0d9128b7219b4c8ee68245a44b3428e796ca2f1
19708 Author: Mike Beattie <mike@ethernal.org>
19709 Date: Thu Mar 7 21:37:51 2013 +1300
19711 altosdroid: Auto tab changing
19713 Signed-off-by: Mike Beattie <mike@ethernal.org>
19715 commit ecfc568574ababd23b2c4dc1323cb7265c097933
19716 Author: Mike Beattie <mike@ethernal.org>
19717 Date: Thu Mar 7 21:37:22 2013 +1300
19719 altosdroid: implement Age field updating
19721 Signed-off-by: Mike Beattie <mike@ethernal.org>
19723 commit 86b742743b26693cf8e56034d4ea68ff277931c1
19724 Author: Mike Beattie <mike@ethernal.org>
19725 Date: Thu Mar 7 21:35:43 2013 +1300
19727 altosdroid: implement UI updating on tabs
19729 Signed-off-by: Mike Beattie <mike@ethernal.org>
19731 commit 2a81d637308e680b99d7218ba9e03c9ade6626f1
19732 Author: Mike Beattie <mike@ethernal.org>
19733 Date: Thu Mar 7 21:33:27 2013 +1300
19735 altosdroid: implement tabs interface
19737 Signed-off-by: Mike Beattie <mike@ethernal.org>
19739 commit 59dfcbe14622c20aaa7d5b131eece9f4c8db6887
19740 Author: Mike Beattie <mike@ethernal.org>
19741 Date: Thu Mar 7 21:28:45 2013 +1300
19743 altosdroid: Import initial versions of XML and Java for Tab content
19745 * Includes TabsAdapter class borrowed from Support Library sample code
19746 * New "GoNoGoLights" class for dealing with the red/green/gray LEDs
19747 * extra required strings in strings.xml
19748 * Couple of support functions in AltosDroid.java
19749 * rudimentary Maps tab - does nothing at present.
19751 Signed-off-by: Mike Beattie <mike@ethernal.org>
19753 commit d6f1b176f4005af3b6fd16d8c7d22260a3ccdfd8
19754 Author: Mike Beattie <mike@ethernal.org>
19755 Date: Thu Mar 7 21:20:47 2013 +1300
19757 altosdroid: whitespace cleanup
19761 Signed-off-by: Mike Beattie <mike@ethernal.org>
19763 commit d229d702c8532f477e2ace2af36f2d0cc6e728d3
19764 Author: Mike Beattie <mike@ethernal.org>
19765 Date: Thu Mar 7 21:20:06 2013 +1300
19767 altosdroid: make AltosDroid.pos() static
19769 * Will be used from tabs that display lat/lon
19771 Signed-off-by: Mike Beattie <mike@ethernal.org>
19773 commit cf03ddb42042002bfb88e13ecfb89b27e7aeb91e
19774 Author: Mike Beattie <mike@ethernal.org>
19775 Date: Thu Mar 7 20:53:26 2013 +1300
19777 altosdroid: convert spaces to tabs in strings.xml
19779 Signed-off-by: Mike Beattie <mike@ethernal.org>
19781 commit 89f8bb52ea858f059374474c0adda3cd5095a589
19782 Author: Mike Beattie <mike@ethernal.org>
19783 Date: Thu Mar 7 20:49:41 2013 +1300
19785 altosdroid: adjust release Makefile target
19788 * Add dependency on unsigned release APK
19789 * use $(ZIPALIGN) variable
19791 Signed-off-by: Mike Beattie <mike@ethernal.org>
19793 commit 6ff45bef719bafd2c827e479186c8fadf6f779aa
19794 Author: Mike Beattie <mike@ethernal.org>
19795 Date: Thu Mar 7 20:48:16 2013 +1300
19797 altosdroid: Symlink red/green/gray LEDs via build system
19799 Signed-off-by: Mike Beattie <mike@ethernal.org>
19801 commit 795fba09a3ca273cd2daeeb7d9fed6bae6fa6a86
19802 Author: Mike Beattie <mike@ethernal.org>
19803 Date: Thu Mar 7 19:23:39 2013 +1300
19805 altosdroid: Adjust build system for GMaps & Tabs support
19807 * Use SupportV4 library for Tab support
19808 * Use Google Services Lib for Google Maps
19809 * revert to a standard Android target, not Google API's
19810 * Add permissions required for Google Maps to manifest, and API key
19812 Signed-off-by: Mike Beattie <mike@ethernal.org>
19814 commit b7dc6045892b33b04ec7c27bdc940b4d3e1b9cbf
19815 Author: Mike Beattie <mike@ethernal.org>
19816 Date: Thu Mar 7 19:05:43 2013 +1300
19818 altosdroid: adjust Makefile rules
19820 separate altoslib linking and, making of external lib directory.
19822 Signed-off-by: Mike Beattie <mike@ethernal.org>
19824 commit 353372425550177cf0531a05706491a96414d12c
19825 Author: Mike Beattie <mike@ethernal.org>
19826 Date: Thu Mar 7 19:02:48 2013 +1300
19828 altosdroid: use a glob for source files
19830 Signed-off-by: Mike Beattie <mike@ethernal.org>
19832 commit 1c9a3a5080ca0e21f45c2b7ea889793645796751
19833 Author: Mike Beattie <mike@ethernal.org>
19834 Date: Thu Mar 7 18:59:30 2013 +1300
19836 altosdroid: Only update BuildInfo.java when other source files change
19838 Signed-off-by: Mike Beattie <mike@ethernal.org>
19840 commit 10042fed36d19c1b21b8f04c57da708afc085b25
19841 Author: Mike Beattie <mike@ethernal.org>
19842 Date: Thu Mar 7 18:54:45 2013 +1300
19844 altosdroid: Fix up some formatting in manifest
19846 (And add flag to allow settings backup by google services)
19848 Signed-off-by: Mike Beattie <mike@ethernal.org>
19850 commit 760b1f02c178c600226f39b5e66d8cbadbf4a29b
19851 Merge: afd2674 cbad587
19852 Author: Keith Packard <keithp@keithp.com>
19853 Date: Wed Mar 6 21:53:22 2013 -0800
19855 Merge remote-tracking branch 'mjb/master'
19857 commit 5560148ffea1a718a303d999a0f8a625deceef23
19858 Author: Mike Beattie <mike@ethernal.org>
19859 Date: Thu Mar 7 18:51:27 2013 +1300
19861 altosdroid: minor whitespace cleanup
19865 Signed-off-by: Mike Beattie <mike@ethernal.org>
19867 commit 9a54e278298540582b91ff3eda476265082e890c
19868 Author: Mike Beattie <mike@ethernal.org>
19869 Date: Thu Mar 7 18:46:32 2013 +1300
19871 altosdroid: update copyrights/licensing
19873 Signed-off-by: Mike Beattie <mike@ethernal.org>
19875 commit afd2674261e128a0ecff8fbf5dd6a64196b026f6
19876 Author: Keith Packard <keithp@keithp.com>
19877 Date: Mon Mar 4 19:44:30 2013 -0800
19879 altoslib: Invalidate GPS new data bit when updating state
19881 Somehow this line got lost when the GPS ground altitude fix was made.
19883 Signed-off-by: Keith Packard <keithp@keithp.com>
19885 commit 3605e97ee918b3f87e4c471906f708c3ea027eef
19886 Author: Keith Packard <keithp@keithp.com>
19887 Date: Sun Mar 3 16:53:52 2013 -0800
19889 ao-tools: Add ao-dumpflash program
19891 This program dumps the entire flash contents of an AltOS device to
19892 allow for external analysis.
19894 Signed-off-by: Keith Packard <keithp@keithp.com>
19896 commit 784edcda52d681bbc9302fbc7efb80cb214f71b8
19897 Author: Keith Packard <keithp@keithp.com>
19898 Date: Sat Mar 2 17:46:29 2013 -0800
19900 libaltos: Open FTDI serial devices twice on Windows.
19902 Looks like the Windows FTDI driver has 'issues' and opening it only
19903 once doesn't work correctly. Just close and re-open the device and it
19904 seems to be perfectly happy.
19908 Signed-off-by: Keith Packard <keithp@keithp.com>
19910 commit cb09076fe16d28e25f5b20b2178cfad10adbeddb
19911 Author: Keith Packard <keithp@keithp.com>
19912 Date: Fri Mar 1 20:48:28 2013 -0800
19914 doc: Add version 1.2 release notes
19916 Signed-off-by: Keith Packard <keithp@keithp.com>
19918 commit c9cba68049f957d69a88150470c086dd6f4a42c0
19919 Author: Keith Packard <keithp@keithp.com>
19920 Date: Fri Mar 1 20:45:43 2013 -0800
19922 doc: Document how to get TeleMini to 'emergency recovery' mode
19924 TeleMini needs emergency recovery mode in case you forget the radio
19925 parameters and need to get things back to a known state. Add
19926 documentation to describe what this does and how to get it enabled.
19928 Signed-off-by: Keith Packard <keithp@keithp.com>
19930 commit 113b1146f6ac0ecd423f3fb409e02730604b8aca
19931 Author: Keith Packard <keithp@keithp.com>
19932 Date: Fri Mar 1 12:34:04 2013 -0800
19934 altosuilib: Disable graph element notifies for each add()
19936 This reduces the number of notify calls made and dramatically speeds
19939 Signed-off-by: Keith Packard <keithp@keithp.com>
19941 commit 351e4110f519d18bb36747955578e9e5b9aeec7b
19942 Author: Keith Packard <keithp@keithp.com>
19943 Date: Fri Mar 1 12:28:34 2013 -0800
19945 altosuilib: Add setNotify/fireSeriesChanged methods to AltosUIGrapher
19947 This will let the data adding functions disable notifications while
19948 adding all of the graph data, and then send a single notification when
19949 the data sets are complete, which speeds up creating of the graph
19950 elements quite a bit.
19952 Signed-off-by: Keith Packard <keithp@keithp.com>
19954 commit d0bd0093a65b73a178da6ddcafcc4dbaa3caca39
19955 Author: Keith Packard <keithp@keithp.com>
19956 Date: Sun Feb 24 01:20:41 2013 -0800
19958 altos: telescience-v0.2 is an ARM product
19960 Move it from SDCC to ARM targets as Jenkins doesn't have an ARM compiler.
19962 Signed-off-by: Keith Packard <keithp@keithp.com>
19964 commit 9230f0a5b119044235c0c419e85a83115aae924d
19965 Author: Keith Packard <keithp@keithp.com>
19966 Date: Sun Feb 24 01:20:16 2013 -0800
19968 altos/driver: Make HMC5883 driver build again
19970 Adapt to changes in OS interfaces
19972 Signed-off-by: Keith Packard <keithp@keithp.com>
19974 commit 2120d362cefceba69e75996b6391d9558978c01d
19975 Merge: 5246acb a04c4f7
19976 Author: Keith Packard <keithp@keithp.com>
19977 Date: Sun Feb 24 00:20:54 2013 -0800
19979 Merge branch 'telescience-v0.2'
19981 commit 5246acb70b79980de36bd5d0ba0d017529ae9a78
19982 Author: Keith Packard <keithp@keithp.com>
19983 Date: Sun Feb 24 00:20:36 2013 -0800
19985 Update build version to 1.2
19987 Prepare for 1.2 release
19989 Signed-off-by: Keith Packard <keithp@keithp.com>
19991 commit 25435dcbc6416935aa432fc090ea977bfff5d153
19992 Author: Keith Packard <keithp@keithp.com>
19993 Date: Sun Feb 24 00:19:49 2013 -0800
19995 altos/stm: Add more bits to NVIC register definitions
19997 This cleans up a few values, adds more comments and a few more NVIC fields.
19999 Signed-off-by: Keith Packard <keithp@keithp.com>
20001 commit cbad587b49c565edd2c9356a015d6cfd52df93a3
20002 Author: Mike Beattie <mike@ethernal.org>
20003 Date: Fri Feb 15 22:09:16 2013 +1300
20005 altosdroid: excise old code/xml
20007 Signed-off-by: Mike Beattie <mike@ethernal.org>
20009 commit 5e53a485310cc11e6add077fb4bd0b0267734ff0
20010 Author: Mike Beattie <mike@ethernal.org>
20011 Date: Fri Feb 15 21:59:08 2013 +1300
20013 all: clean up .gitignore files and Makefile clean targets
20015 Signed-off-by: Mike Beattie <mike@ethernal.org>
20017 commit be8eecc4117a14139e4421ce86b67d29a0f0c3d4
20018 Author: Keith Packard <keithp@keithp.com>
20019 Date: Mon Feb 11 11:40:38 2013 -0800
20021 altosui: Fix AltosLanded call to AltosGraphUI
20023 Changed the argument from String to File but forgot this one.
20025 Signed-off-by: Keith Packard <keithp@keithp.com>
20027 commit 59365eb4e1f63a1ced1667ac233058a06a8eecef
20028 Author: Keith Packard <keithp@keithp.com>
20029 Date: Mon Feb 11 10:34:47 2013 -0800
20031 altosui: Remove graph series which aren't available
20033 Make sure all graph series have actual data underlying them by
20034 checking the available data before creating the series objects.
20036 Signed-off-by: Keith Packard <keithp@keithp.com>
20038 commit 2a9ca1dcd00da2cfdd0a2ea616308dfb64ee80d4
20039 Author: Keith Packard <keithp@keithp.com>
20040 Date: Mon Feb 11 10:31:24 2013 -0800
20042 altosui: Stick file basename in graph window title
20044 The title was empty before, this seems more useful than that.
20046 Signed-off-by: Keith Packard <keithp@keithp.com>
20048 commit 5a4cd7b9b318ddea5d1dcc71918819f11256ca94
20049 Author: Keith Packard <keithp@keithp.com>
20050 Date: Mon Feb 11 10:24:34 2013 -0800
20052 altosuilib: rescale axis when enabling data series
20054 This makes sure new series are visible when you enable them.
20056 Signed-off-by: Keith Packard <keithp@keithp.com>
20058 commit 169a6d51718d6b9fae757df9950d2e960d1c8c1d
20059 Author: Keith Packard <keithp@keithp.com>
20060 Date: Sun Feb 10 19:33:50 2013 -0800
20062 micropeak: Remove Info.plist
20064 It's built from Info.plist.in
20066 Signed-off-by: Keith Packard <keithp@keithp.com>
20068 commit 64399500ad1a7ad70452cbda4d60723b5904ca3d
20069 Author: Keith Packard <keithp@keithp.com>
20070 Date: Sun Feb 10 19:01:41 2013 -0800
20072 Build Windows .nsi files in configure script
20074 These need the library version numbers embedded in them.
20076 Signed-off-by: Keith Packard <keithp@keithp.com>
20078 commit cbd9dd989a662f41ddcb0c9e0f4453840687fd4a
20079 Author: Keith Packard <keithp@keithp.com>
20080 Date: Sun Feb 10 15:34:56 2013 -0800
20082 altosui: Add map and GPS data to graph window. Trac #50
20084 See where the rocket landed without having to replay the whole flight.
20086 Signed-off-by: Keith Packard <keithp@keithp.com>
20088 commit f0a125503e502d213711df0d7774d837d4d98447
20089 Author: Keith Packard <keithp@keithp.com>
20090 Date: Sun Feb 10 14:56:10 2013 -0800
20092 altosui: Display count of erased flights along with their numbers
20094 An attempt to clarify what's going on by providing both a count and
20095 the flight numbers.
20097 Signed-off-by: Keith Packard <keithp@keithp.com>
20099 commit 17455da530833d3db03ee2ace7b15130ed307670
20100 Author: Keith Packard <keithp@keithp.com>
20101 Date: Sun Feb 10 14:51:46 2013 -0800
20103 altosui: Display block number while downloading flights. Track #51
20105 We don't know how long the flight log is, but we can at least provide
20106 a block number in the pacifier to let the user know it's not wedged.
20108 Signed-off-by: Keith Packard <keithp@keithp.com>
20110 commit a9cf50c9f29f42cc3ca0daff3c69a4087cf9aa1c
20111 Author: Keith Packard <keithp@keithp.com>
20112 Date: Sun Feb 10 14:40:48 2013 -0800
20114 altoslib: Fix available flight log storage computation
20116 number of flights was off by one as it was initialized to -1
20117 storage erase unit wasn't getting fetched correctly
20118 flight_log_max is in kB, not B; need to multiply by 1024
20120 Signed-off-by: Keith Packard <keithp@keithp.com>
20122 commit 504cf412e8b60b5ff2dea93ed3336f0e058dea62
20123 Author: Keith Packard <keithp@keithp.com>
20124 Date: Sun Feb 10 14:18:16 2013 -0800
20126 altosui: Display callsign in connecting message window
20128 When waiting for the remote end to respond, display the callsign along
20129 with the frequency so that the user remembers that it's important to
20132 Signed-off-by: Keith Packard <keithp@keithp.com>
20134 commit c2701ae646124f0668c5f2d1df3fc80f0075a9d7
20135 Author: Keith Packard <keithp@keithp.com>
20136 Date: Sun Feb 10 14:17:04 2013 -0800
20138 altosui: Interrupt MonitorIdle when changing frequency/callsign
20140 When switching radio parameters, the local device needs to have the
20141 parameters switched, so interrupt the current operation and start
20142 over, the frequency and callsign will be set the next time through.
20144 Signed-off-by: Keith Packard <keithp@keithp.com>
20146 commit cc0ea39fee73417ecd69c020d9eca723ebb2cf65
20147 Author: Keith Packard <keithp@keithp.com>
20148 Date: Sun Feb 10 11:58:36 2013 -0800
20150 altosui: Add callsign to Monitor Idle window (Trac #62)
20152 This makes it a lot more obvious that the callsign is relevant to the
20153 Monitor Idle process.
20155 Signed-off-by: Keith Packard <keithp@keithp.com>
20157 commit bf88c5f829ea5d32043431945e862a9f6c96740a
20158 Merge: 3227029 d05a779
20159 Author: Keith Packard <keithp@keithp.com>
20160 Date: Sun Feb 10 01:21:52 2013 -0800
20162 Merge remote-tracking branch 'mjb/master'
20164 commit 32270296671aac3b3ba15f9c1777bcdd77b9c36c
20165 Author: Keith Packard <keithp@keithp.com>
20166 Date: Sun Feb 10 00:40:59 2013 -0800
20168 altosui: Adjust graph voltage tool-tip value format
20170 Voltages are always small, so use more of the space for the
20173 Signed-off-by: Keith Packard <keithp@keithp.com>
20175 commit a5fb03421751b342dcd450caee49a608d8828175
20176 Author: Keith Packard <keithp@keithp.com>
20177 Date: Sun Feb 10 00:32:26 2013 -0800
20179 altoslib: Fix a couple of unit functions to make them public
20181 Nice to be able to use these outside of altoslib
20183 Signed-off-by: Keith Packard <keithp@keithp.com>
20185 commit 2efd3ad80d4fefa8ccc1b80a2e657dbf9ba0c60f
20186 Author: Keith Packard <keithp@keithp.com>
20187 Date: Sun Feb 10 00:29:29 2013 -0800
20189 altosui/altoslib/altosuilib: Switch altosui to shared graph code
20191 This adds a configuration tab to the graph window to enable/disable
20192 various plotted values.
20194 Signed-off-by: Keith Packard <keithp@keithp.com>
20196 commit 0169e56ad030c0096b1068d00f06957990dfb31f
20197 Author: Keith Packard <keithp@keithp.com>
20198 Date: Sat Feb 9 20:24:33 2013 -0800
20200 altosuilib/micropeak: Add state markers to micropeak graph
20202 I think this makes the micropeak graph as functional as the altosui graph
20204 Signed-off-by: Keith Packard <keithp@keithp.com>
20206 commit 518b16f64f4be096ceff13ab31b96d6909fe3ae2
20207 Author: Keith Packard <keithp@keithp.com>
20208 Date: Sat Feb 9 19:24:18 2013 -0800
20210 altoslib: Fix altoslib install
20212 Was using AltosLibdir in several places still
20214 Signed-off-by: Keith Packard <keithp@keithp.com>
20216 commit 41ede0267250a1d3b26e19cc9dd78f32609f7f0f
20217 Author: Keith Packard <keithp@keithp.com>
20218 Date: Sat Feb 9 19:23:27 2013 -0800
20220 altosuilib: Initialize graph axes units
20222 Signed-off-by: Keith Packard <keithp@keithp.com>
20224 commit 9d3da1530c1007d5d1f28062b3947f4aa981bfa8
20225 Author: Keith Packard <keithp@keithp.com>
20226 Date: Sat Feb 9 02:00:13 2013 -0800
20228 altoslib: Add AltosUnits.graph_format
20230 This describes the format of numbers used on a graph axis for use with jfreechart
20232 Signed-off-by: Keith Packard <keithp@keithp.com>
20234 commit ab9caa22ea905844a99e08b5f6d3b072f094283e
20235 Author: Keith Packard <keithp@keithp.com>
20236 Date: Sat Feb 9 01:59:18 2013 -0800
20238 micropeak: Use altosuilib graphing functions
20240 Move these out of micropeak and into shared code
20242 Signed-off-by: Keith Packard <keithp@keithp.com>
20244 commit 9839b0b62d797a8616fc66038e3f3c68e2a214d0
20245 Author: Keith Packard <keithp@keithp.com>
20246 Date: Sat Feb 9 01:58:23 2013 -0800
20248 altosuilib: Add graphing routines from MicroPeak
20250 Make these available for AltosUI too
20252 Signed-off-by: Keith Packard <keithp@keithp.com>
20254 commit fd5e6b80a8be5fac7d913b97570f7e11f70a60ba
20255 Author: Keith Packard <keithp@keithp.com>
20256 Date: Sat Feb 9 01:55:51 2013 -0800
20258 altosuilib: Remove duplicate AltosUnitsListener.java
20260 This lives in altoslib
20262 Signed-off-by: Keith Packard <keithp@keithp.com>
20264 commit c6d7776bbe0b7f84e51af88d1ac2b7d35133a0ad
20265 Author: Bdale Garbee <bdale@gag.com>
20266 Date: Sat Feb 9 09:09:36 2013 -0700
20268 various updates to the text .. more SMA to BNC adapter references, etc
20270 commit 033c2c4c018343b0e86d5e231bc2dc56e643f8ee
20271 Author: Bdale Garbee <bdale@gag.com>
20272 Date: Sat Feb 9 08:47:10 2013 -0700
20274 update copyright year to 2013
20276 commit ed200884f3e4fb895ee17ef38a9b6d3371b59625
20277 Author: Bdale Garbee <bdale@gag.com>
20278 Date: Sat Feb 9 08:44:11 2013 -0700
20280 add pcb overall dimensions and screw sizes the holes are intended for
20282 commit e374f8e5a5f12602ef62518fcf672a231080baee
20283 Author: Keith Packard <keithp@keithp.com>
20284 Date: Fri Feb 8 23:37:49 2013 -0800
20286 doc: Add TeleMetrum and TeleMini drill templates
20288 Signed-off-by: Keith Packard <keithp@keithp.com>
20290 commit c3024b759fcdf8b84a2139c1535c573a31eb5c95
20291 Author: Keith Packard <keithp@keithp.com>
20292 Date: Mon Feb 4 10:51:49 2013 -0800
20294 altos: Add atmosphere.5c
20296 Shared code for building pressure tables
20298 Signed-off-by: Keith Packard <keithp@keithp.com>
20300 commit 0e982294961205bef525ecad7172a1f3ab66677f
20301 Author: Keith Packard <keithp@keithp.com>
20302 Date: Mon Feb 4 09:56:18 2013 -0800
20304 test: Accept micropeak CSV files for micropeak testing
20306 This interpolates the missing values to provide a reasonable testing
20307 environment for the Micropeak flight firmware.
20309 Signed-off-by: Keith Packard <keithp@keithp.com>
20311 commit 9aca92a20343a2cf7e05abc7b100852d81f86c0d
20312 Author: Keith Packard <keithp@keithp.com>
20313 Date: Mon Feb 4 09:51:30 2013 -0800
20315 altos: Document which MPU6000 revs have broken accel values
20317 From Tridge -- MPU6000 rev C4 and C5 are broken, having accelerometer
20318 values in the wrong range. This commit just adds comments which note
20319 this; experimentation will be required to actually sort out what's
20322 Signed-off-by: Keith Packard <keithp@keithp.com>
20324 commit 809eb5b1252a75d489e3ad2fd2a4af701fa0aa52
20325 Author: Keith Packard <keithp@keithp.com>
20326 Date: Mon Feb 4 09:50:07 2013 -0800
20328 micropeak: Update Makefile to versioned Java libraries
20330 Library names have changed; deal with it.
20332 Signed-off-by: Keith Packard <keithp@keithp.com>
20334 commit 7afd76e70c086003a2cd87ce459fda4188c76ad6
20335 Author: Keith Packard <keithp@keithp.com>
20336 Date: Mon Feb 4 09:49:07 2013 -0800
20338 altoslib: fix Makefile JAR target
20340 Was referencing stale classAltosLib.stamp instead of new classaltoslib.stamp
20342 Signed-off-by: Keith Packard <keithp@keithp.com>
20344 commit 8d1d8d2a3c129cdbd55427bcda0f26715b02f1ee
20345 Author: Keith Packard <keithp@keithp.com>
20346 Date: Tue Jan 29 17:00:43 2013 +1100
20348 Add version numbers to java libraries
20350 Make our private java library names include a version number so we can
20351 ship and install multiple versions at the same time.
20353 Signed-off-by: Keith Packard <keithp@keithp.com>
20355 commit 5a3c5de6657d1c26e52015a8acec0cd05e294cef
20356 Author: Keith Packard <keithp@keithp.com>
20357 Date: Tue Jan 29 14:52:23 2013 +1100
20359 Change AltosLib to altoslib
20361 Follow Java conventions
20363 Signed-off-by: Keith Packard <keithp@keithp.com>
20365 commit d05a77992df983b9fa79f0e2b20d2c6b387c180c
20366 Author: Mike Beattie <mike@ethernal.org>
20367 Date: Tue Jan 29 01:34:48 2013 +1300
20369 altosdroid: initial release to Play Store
20371 * Add release keystore (encrypted)
20372 * Turn off debugging in UI
20373 * add 'sign' target to Makefile.am
20374 * Update version string in AndroidManifest.xml to match released version of altosui.
20376 Signed-off-by: Mike Beattie <mike@ethernal.org>
20378 commit 5eb52f54a616f4e89b718d50d77a7b68cf7a4354
20379 Author: Keith Packard <keithp@keithp.com>
20380 Date: Thu Jan 24 14:18:39 2013 -0800
20382 Mark MicroPeak as a recording altimeter, not a peak-recording altimeter
20384 Signed-off-by: Keith Packard <keithp@keithp.com>
20386 commit b62097c9d79f848042485234dc46ade60deabc02
20387 Author: Keith Packard <keithp@keithp.com>
20388 Date: Tue Jan 22 18:50:02 2013 -0800
20390 micropeak: fix 'make clean' and .gitignore
20392 Make git status clean in micropeak dir
20394 Signed-off-by: Keith Packard <keithp@keithp.com>
20396 commit 96193d8c09159b81e60851ed90682b9120e15f55
20397 Author: Keith Packard <keithp@keithp.com>
20398 Date: Tue Jan 22 17:49:25 2013 -0800
20400 micropeak: Add mac build file Info.plist
20402 Signed-off-by: Keith Packard <keithp@keithp.com>
20404 commit b5c988fb59c1e48baa81b56be9b7b4ab0eebabea
20405 Author: Keith Packard <keithp@keithp.com>
20406 Date: Tue Jan 22 17:34:44 2013 -0800
20408 Add documentation for the MicroPeak USB interface
20410 Signed-off-by: Keith Packard <keithp@keithp.com>
20412 commit 9da66ca607664bb81b0986c121518faa4c1cb9fd
20413 Author: Keith Packard <keithp@keithp.com>
20414 Date: Tue Jan 22 17:29:37 2013 -0800
20416 micropeak: Respect font size preference in MicroPeak stats tab
20418 This uses the font size preference to adjust the size of the text
20419 shown in the Statistics tab.
20421 Signed-off-by: Keith Packard <keithp@keithp.com>
20423 commit 3454592169dcb61b81de9af2b631b87e7dd86231
20424 Author: Keith Packard <keithp@keithp.com>
20425 Date: Sun Jan 20 15:42:05 2013 -0800
20427 altosui: Make initial AltOS window position configurable
20429 Give the user a choice of nine locations on the screen
20431 Signed-off-by: Keith Packard <keithp@keithp.com>
20433 commit cf03ab3383b679e6617e8ab7004be91e5a727562
20434 Author: Keith Packard <keithp@keithp.com>
20435 Date: Sun Jan 20 15:39:53 2013 -0800
20437 altosui: Remove duplicate AltosUIPreferences.java
20439 This lives in altosuilib now. Several files needed imports of
20440 altosuilib added as a result.
20442 Signed-off-by: Keith Packard <keithp@keithp.com>
20444 commit e1133481f2208fd16be8196977696da2cce430f3
20445 Author: Keith Packard <keithp@keithp.com>
20446 Date: Sun Jan 20 15:37:40 2013 -0800
20448 altosui: All of the Altos class is actually in AltosUILib now
20450 Remove all of the duplicate content, shrinking AltosLib to a simple alias
20452 Signed-off-by: Keith Packard <keithp@keithp.com>
20454 commit 5d35fd843299b5ff09a36220e6ecd8aefceb9b2c
20455 Author: Keith Packard <keithp@keithp.com>
20456 Date: Sat Jan 19 18:04:08 2013 -0800
20458 altosui/micropeak: Let native window system place windows
20460 Instead of forcing windows to our choice of positions, let the host
20461 window pick reasonable locations. This avoids having all of our
20462 windows appear on top of one another.
20464 Signed-off-by: Keith Packard <keithp@keithp.com>
20466 commit aed990c3a37249a111c783336afade7ecdda7546
20467 Author: Keith Packard <keithp@keithp.com>
20468 Date: Sat Jan 19 19:30:38 2013 -0800
20470 altosi: callsign could not be configured for AltosUI
20472 An extra local variable called callsign_value was hiding the object
20473 field by the same name and preventing it from getting set to the right value
20475 Signed-off-by: Keith Packard <keithp@keithp.com>
20477 commit 4646beb421ab5bec612dfe5e3c57e790b1f41203
20478 Author: Keith Packard <keithp@keithp.com>
20479 Date: Fri Jan 18 21:53:54 2013 -0800
20481 Tag version 1.1.9.3
20483 Signed-off-by: Keith Packard <keithp@keithp.com>
20485 commit ce3c9e6be6fde51fb02d692f1ef1222fb5ada8c9
20486 Author: Keith Packard <keithp@keithp.com>
20487 Date: Wed Jan 16 22:05:32 2013 -0800
20489 micropeak: Fetch Mac and Windows drivers when creating packages
20491 This downloads the FTDI drivers from FTDI during the build process
20493 Signed-off-by: Keith Packard <keithp@keithp.com>
20495 commit a04c4f7b07e97d568f8f6f56dd363329817fb52c
20496 Merge: 0c2fa96 bd84dfd
20497 Author: Keith Packard <keithp@keithp.com>
20498 Date: Wed Jan 16 15:22:46 2013 -0800
20500 Merge branch 'master' into telescience-v0.2
20502 commit bd84dfd8e53d8939281993e062015f67c0dd9fa2
20503 Author: Keith Packard <keithp@keithp.com>
20504 Date: Wed Jan 16 15:18:31 2013 -0800
20506 micropeak: Show decimeters in stats window
20508 We're promising this kindof accuracy, so we'd best show it off
20510 Signed-off-by: Keith Packard <keithp@keithp.com>
20512 commit 540309240a8515116120dbd4403902282ed8c27b
20513 Author: Keith Packard <keithp@keithp.com>
20514 Date: Wed Jan 16 15:15:49 2013 -0800
20516 altos: Add Kalman filter to MicroPeak
20518 This filters altitudes more accurately and also allows tracking of
20519 acceleration, which is used to discard height data generated by
20520 ejection charge noise
20522 Signed-off-by: Keith Packard <keithp@keithp.com>
20524 commit 249ee968305ae6e8fcf0a10e5cf9cc5826bd81dd
20525 Author: Keith Packard <keithp@keithp.com>
20526 Date: Wed Jan 16 15:13:31 2013 -0800
20528 altos: Add computation of MicroPeak Kalman correction coefficients
20530 Signed-off-by: Keith Packard <keithp@keithp.com>
20532 commit dd60d85d07b881ac03294a8cf607e469f2e69610
20533 Author: Keith Packard <keithp@keithp.com>
20534 Date: Wed Jan 16 15:01:12 2013 -0800
20536 altos: Correct model error covariance matrix
20538 Finally found a couple of decent references on how to set the model
20539 (process) error covariance matrix. The current process matrix turns
20540 out to be correct for a continuous kalman filter (which isn't
20541 realizable, of course). For a discrete filter, the error in modeled
20542 acceleration (we model it as a constant) needs to be propogated to the
20543 speed and position portions of the matrix.
20545 The correct matrix is seen in this paper:
20547 On Reduced-Order Kalman Filters For GPS Position Filtering
20551 This references an older paper which is supposed to describe the
20552 derivation of the matrix:
20554 Singer, R.A., “Estimating Optimal Tracking Filter Performance for Manned Maneuvering Targets,”
20555 IEEE Transactions of Aerospace and Electronic Systems, AES-5, July 1970, pp. 473-483.
20557 This change has a minor effect on the computed correction
20558 coefficients; it should respond more reasonably to acceleration
20561 Signed-off-by: Keith Packard <keithp@keithp.com>
20563 commit 0c2fa9614ffe22901ba0fd089e1e02c362f9fbe0
20564 Merge: 456120d f2b59cf
20565 Author: Keith Packard <keithp@keithp.com>
20566 Date: Wed Jan 16 10:40:28 2013 -0800
20568 Merge remote-tracking branch 'origin/telescience-v0.2' into telescience-v0.2
20570 commit 456120d201d72c89576a0c8d69b2fcba44169507
20571 Merge: f24c421 994ff76
20572 Author: Keith Packard <keithp@keithp.com>
20573 Date: Wed Jan 16 10:39:40 2013 -0800
20575 Merge branch 'master' into telescience-v0.2
20577 commit 994ff76a064dcbd3113db771cd9cd9591fd68dea
20578 Author: Keith Packard <keithp@keithp.com>
20579 Date: Wed Jan 16 10:37:55 2013 -0800
20581 doc: Add simplesect headers to release notes
20583 This makes it easy to see which changes are from each version of the software.
20585 Signed-off-by: Keith Packard <keithp@keithp.com>
20587 commit f64fe671b7b4e2389219d672bcea978d0539d4ae
20588 Author: Bdale Garbee <bdale@gag.com>
20589 Date: Wed Jan 16 10:46:04 2013 -0700
20591 document what the 'Age' value in the AltosUI display means
20593 commit f2b59cf3d30425bc4b12f37e86832e40b7702d3d
20594 Author: Bdale Garbee <bdale@gag.com>
20595 Date: Wed Jan 16 10:46:04 2013 -0700
20597 document what the 'Age' value in the AltosUI display means
20599 commit f24c4219de9563cf0ef24b763ce54d961c182696
20600 Author: Keith Packard <keithp@keithp.com>
20601 Date: Sun Jan 13 21:38:26 2013 -0800
20603 altos: Change CC1120 SPI speed to 4MHz.
20605 Most of the chip can run at 8MHz, but extended register access is
20606 limited to 6.1MHz. Instead of pushing things, just run the SPI bus at
20609 Signed-off-by: Keith Packard <keithp@keithp.com>
20611 commit a866431e9a063830b407f749ff97a730831e5e4e
20612 Author: Keith Packard <keithp@keithp.com>
20613 Date: Sun Jan 13 20:50:10 2013 -0800
20615 altos: Crank fast SPI on STM to 8MHz
20617 With the GPIO pins set to 10MHz now, we can run SPI at the maximum
20618 possible speed (8MHz).
20620 Signed-off-by: Keith Packard <keithp@keithp.com>
20622 commit 8d885616e2e522b8aea5e7d5398f16d330a0cffa
20623 Author: Keith Packard <keithp@keithp.com>
20624 Date: Sun Jan 13 20:48:47 2013 -0800
20626 altos: Set STM GPIO output speed for SPI pins correctly
20628 The GPIO pin settings affect the output impedence, and hence the
20629 maximum speed for SPI. Cranking these to suitable values allows SPI to
20632 Signed-off-by: Keith Packard <keithp@keithp.com>
20634 commit f2810aa33fc6fe254761a0044c62c7b23e59e6bc
20635 Author: Keith Packard <keithp@keithp.com>
20636 Date: Sun Jan 13 20:48:08 2013 -0800
20638 altos: Build telescience-v0.2
20640 Signed-off-by: Keith Packard <keithp@keithp.com>
20642 commit 3645cb6578ec2a11ab7b0f6d435c6de22ca02a9f
20643 Author: Keith Packard <keithp@keithp.com>
20644 Date: Sun Jan 13 10:31:59 2013 -0800
20646 Update avr ao_spi_slave code to match API changes
20648 Made the interface use void * for pointers and uint16_t for lengths
20650 Signed-off-by: Keith Packard <keithp@keithp.com>
20652 commit 7883744526156879ad63256ab12d959df56d5252
20653 Author: Keith Packard <keithp@keithp.com>
20654 Date: Sat Jan 12 20:11:38 2013 -0800
20656 altos: Initial telescience bits
20658 These might do something, and should at least bring up USB
20660 Signed-off-by: Keith Packard <keithp@keithp.com>
20662 commit 670034eef48d63cdaec8d271fa93da984ffe2ea9
20663 Merge: 8c5ebaf d374d6b
20664 Author: Bdale Garbee <bdale@gag.com>
20665 Date: Sat Jan 12 10:57:22 2013 -0700
20667 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
20669 commit d374d6be7eb040457f4df6c38b5d057f26ee741c
20670 Author: Keith Packard <keithp@keithp.com>
20671 Date: Sat Jan 12 09:45:31 2013 -0800
20673 micropeak: Record samples before boost detect
20675 This saves a ring of 16 samples while waiting for boost, and then goes
20676 back through those looking for the first sample higher than the ground
20677 and writes the remaining ones to the log so that we get a more
20678 complete log of the flight
20680 Signed-off-by: Keith Packard <keithp@keithp.com>
20682 commit 85baf657e7ea6debbed9effc6f8daff7ef09a5d8
20683 Author: Keith Packard <keithp@keithp.com>
20684 Date: Thu Jan 10 23:42:41 2013 -0800
20686 altosui: Reference altosuilib.jar and altoslib.jar from original dirs
20688 The symlinks may not be created when the build is getting run as the
20689 dependencies aren't in place (thanks, automake).
20691 Signed-off-by: Keith Packard <keithp@keithp.com>
20693 commit 962e3bd0461f187cd599ba54e7129c84f97d4c4d
20694 Author: Keith Packard <keithp@keithp.com>
20695 Date: Thu Jan 10 22:11:36 2013 -0800
20697 altosui,micropeak: Link altoslib.jar and altosuilib.jar before compiling
20699 The symlinks for the libraries have to be present before compiling stuff.
20701 Signed-off-by: Keith Packard <keithp@keithp.com>
20703 commit 9f6b1570277c326c00d5da274f608fbdeb91c911
20704 Author: Keith Packard <keithp@keithp.com>
20705 Date: Thu Jan 10 21:42:23 2013 -0800
20707 micropeak: Note when libaltos fails
20709 Not getting any device list back from MicroUSB means the library
20710 wasn't found, so pop up a dialog box explaining the situation.
20712 Signed-off-by: Keith Packard <keithp@keithp.com>
20714 commit c3e807ffcd34d514f36bc11adbae9337991a1743
20715 Author: Keith Packard <keithp@keithp.com>
20716 Date: Thu Jan 10 21:41:35 2013 -0800
20718 micropeak: Create 'micropeak' script correctly
20720 Add altoslibdir, remove -cp argument
20722 Signed-off-by: Keith Packard <keithp@keithp.com>
20724 commit 98e74150040e444ed6480ef3d107caa54c205ef9
20725 Author: Keith Packard <keithp@keithp.com>
20726 Date: Thu Jan 10 21:38:15 2013 -0800
20728 micropeak: Demonstrate how to hide various parts of the graph
20730 This just shows how to disable a series and axis; it's not used here.
20732 Signed-off-by: Keith Packard <keithp@keithp.com>
20734 commit 505ef49a041740fe7cbb5c537b68d22e5fb6c0be
20735 Author: Keith Packard <keithp@keithp.com>
20736 Date: Thu Jan 10 21:37:18 2013 -0800
20738 micropeak: Report recorded apogee instead of searching flight data
20740 This makes sure we report the true apogee value instead of looking for
20741 the maximum height value in the flight data, in case the flight
20742 recording ended before the apogee was reached.
20744 Signed-off-by: Keith Packard <keithp@keithp.com>
20746 commit e94f9547a566c74c30b6321bc073b8bdcb071604
20747 Author: Keith Packard <keithp@keithp.com>
20748 Date: Thu Jan 10 21:34:24 2013 -0800
20750 Fix up 'make fat' to build all libs and micropeak too
20752 There are now three libraries to build for both altosui and micropeak.
20754 Signed-off-by: Keith Packard <keithp@keithp.com>
20756 commit 12a9bd0479db25cbe45c0385913315cc1e0bc892
20757 Author: Keith Packard <keithp@keithp.com>
20758 Date: Thu Jan 10 21:26:20 2013 -0800
20760 libaltos: Need to check for tty/ttyACMx before ttyACMx
20762 Otherwise, we'll find 'tty' when looking for 'ttyACMx' and no good
20763 will come from that
20765 Signed-off-by: Keith Packard <keithp@keithp.com>
20767 commit 1ed6b13e87c1cc2d6618b6ba3a293ea6e3b5752e
20768 Merge: acff2f4 d409417
20769 Author: Keith Packard <keithp@keithp.com>
20770 Date: Thu Jan 10 21:48:12 2013 -0800
20772 Merge remote-tracking branch 'origin/micropeak-logging'
20774 commit acff2f466031fd1a8533fc315411c3734a8bacc6
20775 Author: Keith Packard <keithp@keithp.com>
20776 Date: Thu Jan 10 21:27:32 2013 -0800
20778 altos: Time out reading packet data from cc1120 after 100ms
20780 Sometimes the radio will give a spurious wakeup indicating that a
20781 preamble seems to have arrived, but no packet data will appear. In
20782 this case, abandon the packet reception and go back to waiting for a
20783 preamble again. This releases the SPI bus for other users and also
20784 avoids missing packets.
20786 Signed-off-by: Keith Packard <keithp@keithp.com>
20788 commit f715b5da3424adacc5a7f1e001e1dd7fa6f50385
20789 Author: Keith Packard <keithp@keithp.com>
20790 Date: Wed Jan 9 15:29:01 2013 -0800
20792 altoslib: Clean up AltosRecord clone methods
20794 Make the AltosRecord version abstract and then implement suitable
20795 versions in each subclass by creating copying constructors for each
20798 Signed-off-by: Keith Packard <keithp@keithp.com>
20800 commit 42733d2823b1ecf54c03881fc120067868c0ff4c
20801 Author: Keith Packard <keithp@keithp.com>
20802 Date: Wed Jan 9 15:23:46 2013 -0800
20804 altoslib: Don't smash existing GPS pad alt after boost
20806 Leave the existing GPS pad altitude value in place after boost by
20807 checking to see if it was ever computed before resetting it to the
20808 barometric pad altitude. This makes GPS height values relative to the pad.
20810 Signed-off-by: Keith Packard <keithp@keithp.com>
20812 commit 8c5ebaf88b459b09924753a8077393a7b0639133
20813 Merge: 59f355f d7d259c
20814 Author: Bdale Garbee <bdale@gag.com>
20815 Date: Tue Jan 8 22:12:17 2013 -0700
20817 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
20819 commit d409417ff8e9ed9d406bf1c04542a4ecb574768b
20820 Author: Keith Packard <keithp@keithp.com>
20821 Date: Sun Jan 6 13:20:25 2013 -0800
20823 altosui: Create .dmg file for Mac OS X installations
20825 Easier for users than a zip file
20827 Signed-off-by: Keith Packard <keithp@keithp.com>
20829 commit 2582e9b45bb81ff70fbd5c8581370c8c1b5bd5e5
20830 Author: Keith Packard <keithp@keithp.com>
20831 Date: Sun Jan 6 13:00:00 2013 -0800
20833 micropeak: Add ReadMe.rtf to Mac distribution
20835 There are *two* steps to installing MicroPeak on Mac OSX. Best help
20836 out the poor user by explaining that.
20838 Signed-off-by: Keith Packard <keithp@keithp.com>
20840 commit 0f05b1996122b6c6bce81ca33e85c2a65c3ded18
20841 Author: Keith Packard <keithp@keithp.com>
20842 Date: Sun Jan 6 12:52:25 2013 -0800
20844 micropeak: Create Mac OS X package
20846 Includes the FTDI driver and the MicroPeak app
20848 Signed-off-by: Keith Packard <keithp@keithp.com>
20850 commit d663da13db60e1200535282ee1a0ea6305cad98c
20851 Author: Keith Packard <keithp@keithp.com>
20852 Date: Sat Jan 5 10:59:26 2013 -0800
20854 micropeak: Suggest filenames for saving data
20856 Uses the format '<year>-<month>-<day>-flight-<number>.mpd'
20858 Signed-off-by: Keith Packard <keithp@keithp.com>
20860 commit 0c9eecfae02e8499e7c3d53a4386f026c54b04cd
20861 Author: Keith Packard <keithp@keithp.com>
20862 Date: Sat Jan 5 10:38:20 2013 -0800
20864 micropeak: Create .dmg file for apple. Create micropeak-jdb script
20866 Signed-off-by: Keith Packard <keithp@keithp.com>
20868 commit 20d54cae1eeca6c5d05bfacbafd77c8aa72247c9
20869 Author: Keith Packard <keithp@keithp.com>
20870 Date: Sat Jan 5 10:37:30 2013 -0800
20872 micropeak: Use new libaltos entry point for FTDI devices
20874 Signed-off-by: Keith Packard <keithp@keithp.com>
20876 commit e7e71e2042f2bfc24adcc57cecfe26368eb03e8a
20877 Author: Keith Packard <keithp@keithp.com>
20878 Date: Sat Jan 5 10:36:50 2013 -0800
20880 micropeak: Move raw view caret to top. Make raw text uneditable
20882 Signed-off-by: Keith Packard <keithp@keithp.com>
20884 commit 70c7674b53d77e9995a235bb2dc455cb53d9e81e
20885 Author: Keith Packard <keithp@keithp.com>
20886 Date: Sat Jan 5 10:36:40 2013 -0800
20888 micropeak: Remove debug printf for command line
20890 Signed-off-by: Keith Packard <keithp@keithp.com>
20892 commit 746ae98829a0fc15577ae0f7b506112178f481e3
20893 Author: Keith Packard <keithp@keithp.com>
20894 Date: Sat Jan 5 10:35:20 2013 -0800
20896 Add separate code path for listing FTDI devices
20898 This lets the library do different things for FTDI devices, as is
20899 required on Windows (for instance)
20901 Signed-off-by: Keith Packard <keithp@keithp.com>
20903 commit ca284d8bef2f4bd360eaec58048ba9abdafc55bd
20904 Author: Keith Packard <keithp@keithp.com>
20905 Date: Thu Jan 3 18:14:40 2013 -0800
20907 micropeak: Use data.export for Raw display. Change to MPH
20909 data.export already knows how to format stuff, so use that to
20910 construct the raw data presentation for the GUI too.
20912 Signed-off-by: Keith Packard <keithp@keithp.com>
20914 commit 81088b42b3ea899c8d1b3f09ee4fe24378fa03c9
20915 Author: Keith Packard <keithp@keithp.com>
20916 Date: Thu Jan 3 17:40:19 2013 -0800
20918 micropeak: Export in lots of units
20920 meters, feet, mach and gs
20922 Signed-off-by: Keith Packard <keithp@keithp.com>
20924 commit f20781010a6560b7b359af269c502d098917c446
20925 Author: Keith Packard <keithp@keithp.com>
20926 Date: Thu Jan 3 17:31:01 2013 -0800
20928 micropeak: Add command line export option
20930 micropeak --export <foo.mpd> will create <foo.csv> full of useful data.
20932 Signed-off-by: Keith Packard <keithp@keithp.com>
20934 commit 36e9603f74b85776ac049758021b51909161aeb1
20935 Author: Keith Packard <keithp@keithp.com>
20936 Date: Thu Jan 3 17:30:29 2013 -0800
20938 micropeak: Add Mac OS Info.plist file
20940 needed to build a Mac OS X application
20942 Signed-off-by: Keith Packard <keithp@keithp.com>
20944 commit 722dc277dee915dcd09d3d65c0ee19173b114ef7
20945 Author: Keith Packard <keithp@keithp.com>
20946 Date: Wed Jan 2 16:30:44 2013 -0800
20948 micropeak: Change graph tooltip units on the fly
20950 Make sure the tooltips show the right units when they change
20952 Signed-off-by: Keith Packard <keithp@keithp.com>
20954 commit 9e4c5b0a6ed3594cff6ab71398c172daa7c67177
20955 Author: Keith Packard <keithp@keithp.com>
20956 Date: Wed Jan 2 16:19:33 2013 -0800
20958 micropeak: Use JTextArea instead of TextArea
20960 Looks nicer and doesn't appear to have the same weird clipping problem
20962 Signed-off-by: Keith Packard <keithp@keithp.com>
20964 commit 1979063928f1cdfc75c01ec098164c2822a5138d
20965 Author: Keith Packard <keithp@keithp.com>
20966 Date: Wed Jan 2 16:07:49 2013 -0800
20968 altosuilib: Fix install issues on Linux
20970 altosuilib.jar wasn't getting installed
20971 micropeak was using the wrong name
20973 Signed-off-by: Keith Packard <keithp@keithp.com>
20975 commit 31fa139578a86821844e3e2efb1a84bdea4f1370
20976 Author: Keith Packard <keithp@keithp.com>
20977 Date: Wed Jan 2 12:24:44 2013 -0800
20979 micropeak: Add view of raw data in GUI
20981 Looks just like the export file
20983 Signed-off-by: Keith Packard <keithp@keithp.com>
20985 commit 2c423d9287c6b9ea7233f5e3430682cb1c865da1
20986 Author: Keith Packard <keithp@keithp.com>
20987 Date: Wed Jan 2 11:44:32 2013 -0800
20989 micropeak: Add CSV export
20991 Signed-off-by: Keith Packard <keithp@keithp.com>
20993 commit 93d640de65a1ecedfef89c96521c21632f96f372
20994 Author: Keith Packard <keithp@keithp.com>
20995 Date: Wed Jan 2 11:22:11 2013 -0800
20997 micropoint: Add MicroDataPoint
20999 This holds height/speed/accel data all in one place
21001 Signed-off-by: Keith Packard <keithp@keithp.com>
21003 commit 0933f2ed5791cfdc28242cd60be3942556f4ed20
21004 Author: Keith Packard <keithp@keithp.com>
21005 Date: Wed Jan 2 10:48:56 2013 -0800
21007 altoslib: Remove unused fake product_micropeak_serial
21009 Code cleanups have made this no longer useful
21011 Signed-off-by: Keith Packard <keithp@keithp.com>
21013 commit eb670e9b7576563d747ae5c9416371f145455ec1
21014 Author: Keith Packard <keithp@keithp.com>
21015 Date: Wed Jan 2 09:50:09 2013 -0800
21017 altosui: Remove duplicate AltosUSBDevice
21019 Signed-off-by: Keith Packard <keithp@keithp.com>
21021 commit dc404bee7163a369eb1d95e0942b676bd3f95574
21022 Author: Keith Packard <keithp@keithp.com>
21023 Date: Wed Jan 2 09:41:42 2013 -0800
21025 altosui: Use shared AltosUIListener
21027 Signed-off-by: Keith Packard <keithp@keithp.com>
21029 commit f0bbd3e2571336b5f5872759b5010148325efbaa
21030 Author: Keith Packard <keithp@keithp.com>
21031 Date: Wed Jan 2 09:40:13 2013 -0800
21033 altosui: Use shared AltosUIFrame and AltosUIDialog
21035 Signed-off-by: Keith Packard <keithp@keithp.com>
21037 commit ae09bd641a86970763380f3028f987ffcb791020
21038 Author: Keith Packard <keithp@keithp.com>
21039 Date: Wed Jan 2 09:33:36 2013 -0800
21041 altosui: Use shared AltosFontListener class
21043 Signed-off-by: Keith Packard <keithp@keithp.com>
21045 commit 8af405f1ac4d1b930f10465fd0270a49176f16d1
21046 Author: Keith Packard <keithp@keithp.com>
21047 Date: Wed Jan 2 09:31:35 2013 -0800
21049 altosui: Use shared AltosDeviceDialog
21051 Signed-off-by: Keith Packard <keithp@keithp.com>
21053 commit 605b752080827bb59fcff5af9f1eab9fd5dad76b
21054 Author: Keith Packard <keithp@keithp.com>
21055 Date: Wed Jan 2 09:09:10 2013 -0800
21057 altosui: Remove AltosVersion.java
21059 Version data now stored in AltosUIVersion.java
21061 Signed-off-by: Keith Packard <keithp@keithp.com>
21063 commit 5ce43661834920c3a8f3a1b6e1c555fb952b512d
21064 Author: Keith Packard <keithp@keithp.com>
21065 Date: Wed Jan 2 09:06:41 2013 -0800
21067 altosui: Use altosuilib for configuration
21069 Start moving to shared UI code
21071 Signed-off-by: Keith Packard <keithp@keithp.com>
21073 commit 8a5666bcf4949b846589c000e1620afe39593f57
21074 Author: Keith Packard <keithp@keithp.com>
21075 Date: Wed Jan 2 09:06:22 2013 -0800
21077 libaltos: Remove a couple of spurious debug printfs
21079 Signed-off-by: Keith Packard <keithp@keithp.com>
21081 commit 9efc57e4052e3c11218973f7666ad18ea5cf2a5a
21082 Author: Keith Packard <keithp@keithp.com>
21083 Date: Tue Jan 1 23:15:14 2013 -0800
21085 Rename AltosConfigureUI to AltosUIConfigure
21087 Leave AltosConfigureUI for AltosUI
21089 Signed-off-by: Keith Packard <keithp@keithp.com>
21091 commit 103eaa674be7582437aa850f0fd82788e10f244b
21092 Author: Keith Packard <keithp@keithp.com>
21093 Date: Tue Jan 1 23:10:04 2013 -0800
21095 micropeak: Check CRC on downloaded
21097 Signed-off-by: Keith Packard <keithp@keithp.com>
21099 commit 4dae5b876b089c17c87c72df2ad2fa5ec4f1657c
21100 Author: Keith Packard <keithp@keithp.com>
21101 Date: Tue Jan 1 23:03:29 2013 -0800
21103 Build micropeak by default
21105 Signed-off-by: Keith Packard <keithp@keithp.com>
21107 commit 3ac109132d1878abbd277ae21215716326404781
21108 Author: Keith Packard <keithp@keithp.com>
21109 Date: Tue Jan 1 18:20:23 2013 -0800
21111 Build installable versions of MicroPeak GUI
21113 Makes windows/mac/linux versions. Windows version appears to work on
21116 Signed-off-by: Keith Packard <keithp@keithp.com>
21118 commit d94ceed48be439f368d597bf06ed1e8adc4ef46b
21119 Author: Keith Packard <keithp@keithp.com>
21120 Date: Tue Jan 1 17:10:55 2013 -0800
21122 micropeak: Add 'Close' menu item. Fix start location
21124 Let the window system pick a spot to place the application
21125 windows. This avoids having them all sit on top of one another.
21127 Signed-off-by: Keith Packard <keithp@keithp.com>
21129 commit 982b272920fcb444fd399941cabe613d8ac7104b
21130 Author: Keith Packard <keithp@keithp.com>
21131 Date: Tue Jan 1 16:57:31 2013 -0800
21133 micropeak: Fix chart colors
21135 Need to apply custom colors after setting the theme
21137 Signed-off-by: Keith Packard <keithp@keithp.com>
21139 commit d83587c3c66b730cc54ca153714eee520ee40b2c
21140 Author: Keith Packard <keithp@keithp.com>
21141 Date: Tue Jan 1 15:30:11 2013 -0800
21143 micropeak is code complete now.
21145 Added save and download functionality. Removed 'new' from file menu.
21147 Signed-off-by: Keith Packard <keithp@keithp.com>
21149 commit 65b512c890a3ccf487655b79305ab1cfcf49259c
21150 Merge: 434e946 d7d259c
21151 Author: Keith Packard <keithp@keithp.com>
21152 Date: Mon Dec 31 14:24:59 2012 -0800
21154 Merge remote-tracking branch 'origin/master' into micropeak-logging
21156 commit 434e946aa79b5a7e60799f996887bc6467889b92
21157 Author: Keith Packard <keithp@keithp.com>
21158 Date: Mon Dec 31 14:22:37 2012 -0800
21160 Allow CC1120 to sit on other SPI busses
21162 Reading the incoming data bypasses the SPI API and touches the SPI
21163 data register directly; which port that is needs to be specified in
21166 Signed-off-by: Keith Packard <keithp@keithp.com>
21168 commit 2bd6aca54fc465995d6985c8799cd0d016c9a543
21169 Author: Keith Packard <keithp@keithp.com>
21170 Date: Mon Dec 31 14:17:26 2012 -0800
21172 micropeak: Add flight stats pane
21174 Shows graph or stats in alternate panes
21176 Signed-off-by: Keith Packard <keithp@keithp.com>
21178 commit 56a1210a7b04a3623d19ec282f26fecc79c126dd
21179 Author: Keith Packard <keithp@keithp.com>
21180 Date: Mon Dec 31 11:42:57 2012 -0800
21182 micropeak: Use altosuilib
21184 This removes a pile of code stolen from altosui
21186 Signed-off-by: Keith Packard <keithp@keithp.com>
21188 commit 6db192898eebf750c4d51516eff7916bc4da493b
21189 Author: Keith Packard <keithp@keithp.com>
21190 Date: Mon Dec 31 11:38:53 2012 -0800
21192 altoslib: Add units change notification list
21194 This allows the UI to automatically respond to changes in the
21197 Signed-off-by: Keith Packard <keithp@keithp.com>
21199 commit 03496dc47372c40f7faae1766b0e729a1feeab7c
21200 Author: Keith Packard <keithp@keithp.com>
21201 Date: Mon Dec 31 11:32:56 2012 -0800
21203 Create altosuilib to share code between altosui and micropeak
21205 Need to convert altosui to using it, but that shouldn't be hard
21207 Signed-off-by: Keith Packard <keithp@keithp.com>
21209 commit d7d259c7b3eedcc1c185d2b7e3c33e829bd7ce96
21210 Author: Keith Packard <keithp@gag.com>
21211 Date: Fri Dec 28 23:05:31 2012 -0700
21213 altos: megadongle radio int is C13, not C14
21215 Hard to get interrupts when listening to the wrong pin
21217 Signed-off-by: Keith Packard <keithp@gag.com>
21219 commit f7a56152808c7838c1886884bb77de2705ab076c
21220 Merge: daf8776 b70ca5e
21221 Author: Keith Packard <keithp@keithp.com>
21222 Date: Fri Dec 28 21:50:13 2012 -0800
21224 Merge remote-tracking branch 'origin/master' into micropeak-logging
21226 commit 59f355f5288b42b2e47743d06e41e55819a55f64
21227 Merge: 099d2b0 b70ca5e
21228 Author: Bdale Garbee <bdale@gag.com>
21229 Date: Fri Dec 28 22:30:26 2012 -0700
21231 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
21233 commit b70ca5eaf1c3d60bd9adf6835e1247f4147ca9c8
21234 Author: Keith Packard <keithp@gag.com>
21235 Date: Fri Dec 28 19:35:46 2012 -0700
21237 altos: Fix MegaDongle CC1120 chip select pin
21241 Signed-off-by: Keith Packard <keithp@gag.com>
21243 commit a6e116515f5e4522adbfcd1900885c2a6034b57c
21244 Author: Keith Packard <keithp@gag.com>
21245 Date: Fri Dec 28 19:34:33 2012 -0700
21247 altos: Fix cc1120 debug code to build on megadongle
21249 RDF function had changed, and APRS isn't available on megadongle.
21251 Signed-off-by: Keith Packard <keithp@gag.com>
21253 commit daf8776f8646ba187f1a17f7aae797503bed3f2a
21254 Author: Keith Packard <keithp@keithp.com>
21255 Date: Fri Dec 28 16:34:48 2012 -0800
21257 Lots more work on the MicroPeak application
21259 Signed-off-by: Keith Packard <keithp@keithp.com>
21261 commit 099d2b0ea59d825bd69a3fbb5523b9cbb9430ce8
21262 Author: Bdale Garbee <bdale@gag.com>
21263 Date: Fri Dec 28 15:36:24 2012 -0700
21265 update stlink-pins document to make it clear 4-pin MicroMaTch is our
21266 standard STM32L programming connector, and the big MM thing was v0.1 only
21268 commit 9da9adc2718928de2af65a68cddbcc636cc3e9e8
21269 Author: Keith Packard <keithp@keithp.com>
21270 Date: Tue Dec 25 14:45:49 2012 -0800
21272 Add file chooser for MicroPeak
21274 Needs reasonable directory tracking
21276 Signed-off-by: Keith Packard <keithp@keithp.com>
21278 commit bf8e1b6eecb2bae12ffdbd730bd6ec12ccdaf23a
21279 Author: Keith Packard <keithp@keithp.com>
21280 Date: Tue Dec 25 14:23:29 2012 -0800
21282 Start building MicroPeak GUI tool
21284 Download, save and analyze MicroPeak flight data
21286 Signed-off-by: Keith Packard <keithp@keithp.com>
21288 commit 868ef0c9c4b208c02a87180b0eede329369bdc77
21289 Merge: 669cde8 57487e7
21290 Author: Keith Packard <keithp@keithp.com>
21291 Date: Tue Dec 25 14:20:42 2012 -0800
21293 Merge branch 'master' into micropeak-logging
21295 commit 669cde8a87d88ceae89e369c1d38b88c9f8198cf
21296 Author: Keith Packard <keithp@keithp.com>
21297 Date: Tue Dec 25 14:19:19 2012 -0800
21299 Move libaltos to top level
21301 This will let it be shared by the new MicroPeak gui
21303 Signed-off-by: Keith Packard <keithp@keithp.com>
21305 commit 57487e78b90465a21c87cf30deb0aeaba0887332
21306 Author: Keith Packard <keithp@keithp.com>
21307 Date: Tue Dec 18 23:15:20 2012 -0800
21309 altos: Actually record ground averages for 6dof sensor
21311 This gets the long-term averages for the 6dof sensors recorded into
21312 the first flight log record.
21314 Signed-off-by: Keith Packard <keithp@keithp.com>
21316 commit 244415c515f21328cffe88d1369949a4af49a177
21317 Author: Keith Packard <keithp@keithp.com>
21318 Date: Tue Dec 18 22:59:36 2012 -0800
21320 altosui: Clean up graph a bit, remove shapes, improve tooltips
21322 Sometimes graphs would get shapes at each datapoint which was
21323 annoyingly cluttered. And, the tooltips used a format that was
21324 difficult to interpret.
21326 Signed-off-by: Keith Packard <keithp@keithp.com>
21328 commit d7d35b0bd86b912c43a21a275347fca201079847
21329 Author: Keith Packard <keithp@keithp.com>
21330 Date: Tue Dec 18 00:39:37 2012 -0800
21332 altos: Add distinct LED pattern before writing log data
21334 Otherwise, the whole log looks like a an extra altitude digit.
21336 Signed-off-by: Keith Packard <keithp@keithp.com>
21338 commit 23dc9a63ae8bc982d9352cfb7a3f508d8a08c374
21339 Author: Keith Packard <keithp@keithp.com>
21340 Date: Mon Dec 17 22:58:49 2012 -0800
21342 altos: Make micropeak 'serial' interface work
21344 I prototyped the mpserial interface on a breadboard and tuned the
21345 circuit to register the LED correctly. Then adjusted the serial code
21346 to send bits at the right speed and format.
21348 The logging contents are now in hexdecimal with a CCITT CRC-16
21349 computed to verify correct reception.
21351 Signed-off-by: Keith Packard <keithp@keithp.com>
21353 commit b1d37be4c024e9690107c693d9819229025966fa
21354 Author: Keith Packard <keithp@keithp.com>
21355 Date: Mon Dec 17 17:03:41 2012 -0800
21357 altos: Average MPU6000 values on ground for later use
21359 Having long-term ground averages recorded to the eeprom file will make
21360 post-flight analysis of the data better.
21362 Signed-off-by: Keith Packard <keithp@keithp.com>
21364 commit b6c9e8ffc87481a23ba90fa22df7c9421e2cd6a6
21365 Author: Keith Packard <keithp@keithp.com>
21366 Date: Sun Dec 16 16:52:15 2012 -0800
21368 altos: Re-enable beeper on megametrum
21370 I turned it off during radio testing and forgot to fix that before committing...
21372 Signed-off-by: Keith Packard <keithp@keithp.com>
21374 commit dd7c30324461b2aed83b86bfe4323180664123cf
21375 Author: Keith Packard <keithp@keithp.com>
21376 Date: Sun Dec 16 16:08:33 2012 -0800
21378 altos: Add new MARC status pin interrupt bits to megadongle
21380 Signed-off-by: Keith Packard <keithp@keithp.com>
21382 commit dfff41c2bec16fe4c7b198a4720eb40d8e740ac4
21383 Merge: 22a58b0 00bc1a0
21384 Author: Keith Packard <keithp@keithp.com>
21385 Date: Sun Dec 16 16:06:41 2012 -0800
21387 Merge branch 'aprs' into 'master'
21389 commit 22a58b0f9b82ea8c7abeda79ca7a4cd21c3dc93c
21390 Author: Keith Packard <keithp@keithp.com>
21391 Date: Sun Dec 16 16:04:05 2012 -0800
21393 altos: Wire up another CC1120 GPIO to get MARC status changes
21395 When the radio drops out of RX or TX mode due to an error, it changes
21396 the MARC status, and sends pulse down a configured GPIO. Use this to
21397 tell when something 'bad' happened during TX or RX so that we can
21398 recover from losing the SPI bus in the middle of transmission or
21401 Without this, the radio would change state and we'd never know,
21402 leaving the radio code waiting for an interrupt that would never arrive.
21404 Signed-off-by: Keith Packard <keithp@keithp.com>
21406 commit 4e3ac3f2038cc3a43252fc8f820a1373a637ab83
21407 Author: Keith Packard <keithp@keithp.com>
21408 Date: Sun Dec 16 13:31:45 2012 -0800
21410 altos: Test APRS rounding by using coordinates near the boundary
21412 This selects lat/lon and altitude near the rounding boundary to check
21413 that the resulting APRS data is correctly computed.
21415 Signed-off-by: Keith Packard <keithp@keithp.com>
21417 commit 9bc701ce1132f04ec90ef22e6a7a90c67918737b
21418 Author: Keith Packard <keithp@keithp.com>
21419 Date: Sun Dec 16 13:30:20 2012 -0800
21421 altos: Document what HAS_BOOT_RADIO does in the m25 driver
21423 HAS_BOOT_RADIO causes the m25 driver to abort any ongoing receive in
21424 case that is holding the SPI bus.
21426 Signed-off-by: Keith Packard <keithp@keithp.com>
21428 commit 6b4cfd8719e3fd4a2904369e176182c870a3b43c
21429 Author: Keith Packard <keithp@keithp.com>
21430 Date: Sun Dec 16 13:29:31 2012 -0800
21432 altos: Round APRS data correctly
21434 Apply rounding once at the start of the computation, then truncate
21437 Signed-off-by: Keith Packard <keithp@keithp.com>
21439 commit 00bc1a090a294e103370b8ab0a0fe5d7a2acfe92
21440 Author: Keith Packard <keithp@keithp.com>
21441 Date: Sun Dec 16 13:25:54 2012 -0800
21443 altoslib: unconfigured radio frequency data is now -1, not 0
21445 This changed when AltosConfigData was cleaned up, so now frequency
21446 settings must check for positive numbers rather than non-zero.
21448 Signed-off-by: Keith Packard <keithp@keithp.com>
21450 commit 034dfc4f9bef049b1fb5704873dd76f6a3a9949d
21451 Author: Keith Packard <keithp@keithp.com>
21452 Date: Sat Dec 15 15:07:07 2012 -0800
21454 doc: Add warning about matching battery voltage.
21456 Signed-off-by: Keith Packard <keithp@keithp.com>
21458 commit 4925a6f2f4edd5b54641a5240030e5c0e3e95db6
21459 Author: Keith Packard <keithp@keithp.com>
21460 Date: Sat Dec 15 14:47:22 2012 -0800
21462 doc: Add paragraph noting differences in JST polarity
21464 Looks like the 'standard' polarity for 3.7V lipos using JST connectors
21465 in RC aircraft is swapped from what Spark Fun uses. Note that in the
21466 docs to try and keep people from wrecking hardware.
21468 Signed-off-by: Keith Packard <keithp@keithp.com>
21470 commit 6fa1ec0dbf2a4eda8d061c67b3779b83b88f29f0
21471 Merge: f140931 73422bf
21472 Author: Keith Packard <keithp@keithp.com>
21473 Date: Fri Dec 14 19:29:50 2012 -0800
21475 Merge branch 'micropeak-1.1'
21477 commit f1409311761d65e85ac08c38c9b9a0114cc8f535
21478 Author: Keith Packard <keithp@keithp.com>
21479 Date: Fri Dec 14 19:28:49 2012 -0800
21481 altoslib: Discard previous flight state on SN change
21483 A previous change discarded previous *telemetry* state, but failed to
21484 discard any previous overall flight state. This would reset some of
21485 the data fields, but wouldn't reset the GPS state and max measurements.
21487 Signed-off-by: Keith Packard <keithp@keithp.com>
21489 commit 8dbe8abd034a2d1ee2ec0380ec376722a4ecbd71
21490 Author: Keith Packard <keithp@keithp.com>
21491 Date: Fri Dec 14 19:27:56 2012 -0800
21493 altoslib: Only list flight logs for boards that we know have them
21495 Boards that don't have flight logs will generate a nice 'Syntax Error'
21496 and fail to initialize.
21498 Signed-off-by: Keith Packard <keithp@keithp.com>
21500 commit fc2e5beb9173663e1e37a9b5a7b6eea1046222f7
21501 Author: Keith Packard <keithp@keithp.com>
21502 Date: Fri Dec 14 11:11:39 2012 -0800
21504 altos: Log baro readings for MicroPeak
21506 This logs barometric data every 192ms (more or less) to the 504
21507 remaining bytes of internal EEPROM storage in the ATtiny85. This
21508 provides 48.192 seconds of logging.
21510 Signed-off-by: Keith Packard <keithp@keithp.com>
21512 commit 73422bf72e07b169bfe37b02518b9e7479931971
21513 Author: Keith Packard <keithp@keithp.com>
21514 Date: Wed Dec 12 22:53:36 2012 -0800
21516 altos: Note that Lithium battery may be included with MicroPeak
21518 I'm not willing to say that we'll always be able to include a battery,
21519 but we can certainly try, and they're certainly cheap enough that we
21522 Signed-off-by: Keith Packard <keithp@keithp.com>
21524 commit 688a9458bb03a81e71554c14295d1baacbbbd530
21525 Merge: 816c6b5 c8866fb
21526 Author: Keith Packard <keithp@keithp.com>
21527 Date: Wed Dec 12 22:36:59 2012 -0800
21529 Merge branch 'micropeak-1.1'
21531 commit c8866fbae2b00b1d7a7ddf89a3f971a75d3dcd60
21532 Author: Keith Packard <keithp@keithp.com>
21533 Date: Wed Dec 12 22:35:05 2012 -0800
21535 doc: Update MicroPeak doc to include EEPROM and programming info
21537 Signed-off-by: Keith Packard <keithp@keithp.com>
21539 commit 816c6b5d087694a9db9c34cc5ec7671a1487d9b9
21540 Merge: a4a8418 a4678cd
21541 Author: Keith Packard <keithp@keithp.com>
21542 Date: Wed Dec 12 11:10:14 2012 -0800
21544 Merge branch 'micropeak-1.1'
21546 commit a4678cd848da994dc893b75790e4c9a86e54d895
21547 Author: Keith Packard <keithp@keithp.com>
21548 Date: Wed Dec 12 11:01:48 2012 -0800
21550 altos: Log in-flight data for MicroPeak
21552 This logs the low 16 bits of the pressure value to the remaining
21553 on-chip eeprom. It can be read out with a standard AVR programming
21556 Signed-off-by: Keith Packard <keithp@keithp.com>
21558 commit 07a45c50429389ae7b51e12bc847d34fb1577bc6
21559 Author: Keith Packard <keithp@keithp.com>
21560 Date: Wed Dec 12 10:57:03 2012 -0800
21562 altos: Add load-slow target for MicroPeak
21564 This sets the programming clock to 1/4 of the 250kHz clock used by the
21565 MicroPeak firmware, allowing the device to be reprogrammed.
21567 Signed-off-by: Keith Packard <keithp@keithp.com>
21569 commit 69447d8ad3f5a1e1f59939477afc7720a437fadc
21570 Author: Keith Packard <keithp@keithp.com>
21571 Date: Tue Dec 11 23:43:30 2012 -0800
21573 altos: Tim Van Milligan suggestion for µP -- delay before showing last flight
21575 This gives the user time to move their finger out of the way of the LED.
21577 Signed-off-by: Keith Packard <keithp@keithp.com>
21579 commit a4a841828924ee37f5201d4ff0aec38459f2d802
21580 Merge: b26e837 d309fcf
21581 Author: Keith Packard <keithp@keithp.com>
21582 Date: Tue Dec 11 14:42:43 2012 -0800
21584 Merge branch 'micropeak-1.1'
21586 commit d309fcff54fe6904fb860f33c15fcb7d1c96e91b
21587 Author: Keith Packard <keithp@keithp.com>
21588 Date: Tue Dec 11 14:41:53 2012 -0800
21590 altos: Increase MicroPeak blink times a bit
21592 make the 0 longer (1 sec now), and make the time between digits longer
21595 Signed-off-by: Keith Packard <keithp@keithp.com>
21597 commit b26e837a6f18641aae9372aab22168849ff10812
21598 Merge: 1489c7f c233ef6
21599 Author: Keith Packard <keithp@keithp.com>
21600 Date: Sun Dec 9 18:33:31 2012 -0800
21602 Merge branch 'micropeak-1.1'
21604 commit c233ef67f42c14cb1d0e0542a9523b279f826af5
21605 Author: Keith Packard <keithp@keithp.com>
21606 Date: Sun Dec 9 18:28:33 2012 -0800
21608 altos: Use alt_t value to hold displayed height in micropeak
21610 Heights are 32 bits (to get .1 meter resolution) in micropeak; make
21611 sure we have enough bits while blinking out the computed value.
21613 Signed-off-by: Keith Packard <keithp@keithp.com>
21615 commit defd5d0784a754be30e3295067fbc85a108ad172
21616 Author: Keith Packard <keithp@keithp.com>
21617 Date: Sun Dec 9 18:27:49 2012 -0800
21619 altos: Make sure pa to altitude conversion is done with 32 bits
21621 We need 32 bits to hold intermediate values, even if the final
21622 altitude is reported in only 16 bits.
21624 Signed-off-by: Keith Packard <keithp@keithp.com>
21626 commit 24948ea1d41f2a7c96ac09e35d1250909e5726ae
21627 Author: Keith Packard <keithp@keithp.com>
21628 Date: Sun Dec 9 14:32:35 2012 -0800
21630 altos: Store altitude in 32-bits for MicroPeak
21632 Needs all 32 bits to store .1 meter resolution
21634 Signed-off-by: Keith Packard <keithp@keithp.com>
21636 commit cf47efdc86f0b421fcf4389669fbecf6fa3f5934
21637 Author: Keith Packard <keithp@keithp.com>
21638 Date: Fri Dec 7 22:49:34 2012 -0800
21640 altos: Stop including profiling and stack guard code in megametrum
21642 These take CPU time and memory and are intended only for debugging
21644 Signed-off-by: Keith Packard <keithp@keithp.com>
21646 commit 4339d5c8e6373119e5377fe5c883b6b0e6ce37f6
21647 Author: Keith Packard <keithp@keithp.com>
21648 Date: Fri Dec 7 17:38:17 2012 -0800
21650 altos: Fix aprs test to not allow callsign configuration
21652 There's no configuration to take a callsign from...
21654 Signed-off-by: Keith Packard <keithp@keithp.com>
21656 commit abf82991b8e69754ebc4857ce78ac4a4b01f16e4
21657 Author: Keith Packard <keithp@keithp.com>
21658 Date: Fri Dec 7 17:35:15 2012 -0800
21660 altosui: Add APRS interval configuration to UI
21662 Signed-off-by: Keith Packard <keithp@keithp.com>
21664 commit bd05421991b596fe9cf73ee25c9046b0fb4e32f7
21665 Merge: 1f79706 1489c7f
21666 Author: Keith Packard <keithp@keithp.com>
21667 Date: Fri Dec 7 17:34:10 2012 -0800
21669 Merge branch 'master' into aprs
21671 commit 1489c7f75f7b9ce547ac49c157b440c4f9131ef4
21672 Author: Keith Packard <keithp@keithp.com>
21673 Date: Fri Dec 7 17:27:48 2012 -0800
21675 altosui: Call config UI from AltosConfigData directly
21677 Don't make AltosConfig have a pile of config code, stick that in
21678 AltosConfigData instead. This uses a new interface, AltosConfigValues
21679 to get from AltosConfigData to the UI.
21681 Signed-off-by: Keith Packard <keithp@keithp.com>
21683 commit 1f797066857b171b19829e2bb7187b8faf37d07c
21684 Author: Keith Packard <keithp@keithp.com>
21685 Date: Fri Dec 7 17:20:02 2012 -0800
21687 altos: Use configured callsign in APRS packets
21689 Instead of hard-coding my own call sign...
21691 Signed-off-by: Keith Packard <keithp@keithp.com>
21693 commit b28323ce91d23db5e1c3cbd1309c72aafcfbe235
21694 Author: Keith Packard <keithp@keithp.com>
21695 Date: Fri Dec 7 17:18:32 2012 -0800
21697 altos: Make APRS interval configurable
21699 This provides a separate configuration value for APRS, allowing the
21700 interval between APRS reports to vary.
21702 Signed-off-by: Keith Packard <keithp@keithp.com>
21704 commit f8a704268f0978a39b9c7983e049ef55914f7280
21705 Author: Keith Packard <keithp@keithp.com>
21706 Date: Fri Dec 7 10:15:25 2012 -0800
21708 altos: Fix up APRS packet sending code in cc1120 driver
21710 This fixes the FIFO management, ensuring that the data are streamed
21711 into the radio fast enough to keep the packet continuous. Sounds like
21712 it works, but testing with an actual APRS receiver is required.
21714 Signed-off-by: Keith Packard <keithp@keithp.com>
21716 commit 748e42ebf1dfb1efd5dec6ddd93f5c7aeedeb01d
21717 Merge: 75912f8 c10f9a4
21718 Author: Keith Packard <keithp@keithp.com>
21719 Date: Fri Dec 7 10:14:11 2012 -0800
21721 Merge branch 'master' into aprs
21723 commit c10f9a438ed5789479d21c78153ca7f14c05534c
21724 Author: Keith Packard <keithp@keithp.com>
21725 Date: Fri Dec 7 10:05:51 2012 -0800
21727 altos: fix functions calling pollchar to use 'int' to hold the value
21729 AO_READ_AGAIN doesn't fit in a char anymore now that stdio is 8-bit
21730 clean, everyone using pollchar must use an 'int' variable to capture
21731 the whole value from pollchar.
21733 Signed-off-by: Keith Packard <keithp@keithp.com>
21735 commit 16fd9009d8b034fd8d208115317f65fabe10072a
21736 Author: Keith Packard <keithp@keithp.com>
21737 Date: Fri Dec 7 08:32:22 2012 -0800
21739 altosui: Use AltosConfigData for altosui configuration dialog
21741 Instead of a separate config language parser, share with altoslib
21743 Signed-off-by: Keith Packard <keithp@keithp.com>
21745 commit e572651b36ad557d716fb14e76e3eec132e5ebdf
21746 Author: Keith Packard <keithp@keithp.com>
21747 Date: Thu Dec 6 17:08:39 2012 -0800
21749 altoslib: Make AltosConfigData parse all of the config data
21751 It was missing quite a few. This also speeds up parsing of config from
21752 TeleScience, TeleBT and TeleTerra by not listing flight info on those
21753 products (where it doesn't make sense).
21755 Signed-off-by: Keith Packard <keithp@keithp.com>
21757 commit cb4f2b62d50aca615bd4f9f230a1736880125e3e
21758 Author: Keith Packard <keithp@keithp.com>
21759 Date: Thu Dec 6 17:07:25 2012 -0800
21761 altoslib: Make AltosMs5607 capable of parsing ms5607 info lines
21763 This moves the parsing from AltosMs5607Query
21765 Signed-off-by: Keith Packard <keithp@keithp.com>
21767 commit b4e86af6de52ea0bacf80e3936b6cd17c1cbf898
21768 Author: Keith Packard <keithp@keithp.com>
21769 Date: Thu Dec 6 17:06:17 2012 -0800
21771 altos: Change 'flight-number' to 'current-flight'
21773 Avoids ambiguity with stored flight info, which starts lines with 'flight'.
21775 Signed-off-by: Keith Packard <keithp@keithp.com>
21777 commit 9d095eb1987f35d0d4e6540bf335e1faaa7c86ec
21778 Author: Keith Packard <keithp@keithp.com>
21779 Date: Thu Dec 6 16:29:36 2012 -0800
21781 altos: Shrink 'ao_version' by calling printf fewer times
21783 Each printf call costs quite a bit of code space on the cc1111, so
21784 instead of making multiple short calls, make one longer one.
21786 Signed-off-by: Keith Packard <keithp@keithp.com>
21788 commit 75912f8af04cecc0bbffecb2072d465c3744d4e8
21789 Author: Keith Packard <keithp@keithp.com>
21790 Date: Thu Dec 6 10:30:46 2012 -0800
21792 altos: Send APRS packets even during ascent
21794 If you're using APRS, presumably you want to watch the rocket going up too.
21796 Signed-off-by: Keith Packard <keithp@keithp.com>
21798 commit 1f84c0adbfa494ddc7dbe276796d999560be9438
21799 Author: Keith Packard <keithp@keithp.com>
21800 Date: Thu Dec 6 10:28:14 2012 -0800
21802 altos: Allow telemetry, rdf and APRS to be individually controlled
21804 But, only when APRS is available so that TeleMetrum and TeleMini don't
21807 Signed-off-by: Keith Packard <keithp@keithp.com>
21809 commit f661da527fb4a3a492f5322e2a718d441e1cde83
21810 Author: Keith Packard <keithp@keithp.com>
21811 Date: Thu Dec 6 10:23:39 2012 -0800
21813 altos: Hook up APRS to telemetry loop
21815 Send APRS packet once every 2 seconds
21817 Signed-off-by: Keith Packard <keithp@keithp.com>
21819 commit c1e6fa32b856b91afa355cd272d2d7287d3ccca1
21820 Author: Keith Packard <keithp@keithp.com>
21821 Date: Thu Dec 6 10:12:11 2012 -0800
21823 altos: Hook APRS up to the radio
21825 This adds an arbitrary-length packet writing function to the radio
21828 Signed-off-by: Keith Packard <keithp@keithp.com>
21830 commit 51ef826372f466f44901c4c609ed6a987d30fda4
21831 Author: Keith Packard <keithp@keithp.com>
21832 Date: Wed Dec 5 23:39:47 2012 -0800
21834 altos: Prepare APRS for use within altos itself
21836 Make all variables static, const-ify constants, change the public
21837 name of the single entry point.
21839 Signed-off-by: Keith Packard <keithp@keithp.com>
21841 commit 74969483736381858484dca9ebb528d9d2d73f5b
21842 Author: Keith Packard <keithp@keithp.com>
21843 Date: Wed Dec 5 22:23:46 2012 -0800
21845 altos: Start restructuring APRS code to create and send packets
21847 Signed-off-by: Keith Packard <keithp@keithp.com>
21849 commit 933d654ec917d9794e87407a7e579438bb738d54
21850 Author: Keith Packard <keithp@keithp.com>
21851 Date: Wed Dec 5 21:37:47 2012 -0800
21853 altos: Remove a bunch of time bits from the APRS code
21855 Signed-off-by: Keith Packard <keithp@keithp.com>
21857 commit 684f53d67379cf2ae696fab93d81e49208dfa43c
21858 Author: Keith Packard <keithp@keithp.com>
21859 Date: Wed Dec 5 21:34:05 2012 -0800
21861 altos: Remove APRS sine-wave table
21863 We're generating a lovely square wave, which appears to be decoded
21864 just fine thankyouverymuch.
21866 Signed-off-by: Keith Packard <keithp@keithp.com>
21868 commit b79f448818126258174044a23db5b4f330fd5986
21869 Author: Keith Packard <keithp@keithp.com>
21870 Date: Wed Dec 5 21:25:29 2012 -0800
21872 altos: More APRS trimming
21874 Signed-off-by: Keith Packard <keithp@keithp.com>
21876 commit 0bb7200f85db1bc6e39e72e671be9a7aef9c8f09
21877 Author: Keith Packard <keithp@keithp.com>
21878 Date: Wed Dec 5 21:22:55 2012 -0800
21880 altos: Remove more unused APRS code
21882 Getting down to a reasonable amount of code.
21884 Signed-off-by: Keith Packard <keithp@keithp.com>
21886 commit d717edd18a35376811d6be0d0c7522ee8cc426f9
21887 Author: Keith Packard <keithp@keithp.com>
21888 Date: Wed Dec 5 21:13:37 2012 -0800
21890 altos: Reduce printf calls in APRS packet generation
21892 Merge all of the data into a single printf call
21894 Signed-off-by: Keith Packard <keithp@keithp.com>
21896 commit 3e1254c4f3261f66d8070250898fe906eb80d8f2
21897 Author: Keith Packard <keithp@keithp.com>
21898 Date: Wed Dec 5 21:08:19 2012 -0800
21900 altos: Strip out everything but the basic position reporting from APRS
21902 Any useful data will be sent over the digital link; APRS is strictly
21903 for position tracking
21905 Signed-off-by: Keith Packard <keithp@keithp.com>
21907 commit fe820a8a2dc6248b5edb96a9521536d41b936116
21908 Author: Keith Packard <keithp@keithp.com>
21909 Date: Wed Dec 5 21:01:59 2012 -0800
21911 Signed-off-by: Keith Packard <keithp@keithp.com>
21913 altos: Switch APRS to standard position reporting form
21915 Stop using NMEA sentences for position
21917 commit 03f844ddcd95166211451fda0b20f9b15496294e
21918 Author: Keith Packard <keithp@keithp.com>
21919 Date: Wed Dec 5 20:11:35 2012 -0800
21921 altos: Add missing ao_aprs.h file
21923 This has defines for the planned APRS interface
21925 Signed-off-by: Keith Packard <keithp@keithp.com>
21927 commit 8b1f186a574c22cebd9daba9d352ec82556c3b28
21928 Author: Keith Packard <keithp@keithp.com>
21929 Date: Wed Dec 5 20:10:54 2012 -0800
21931 altos: Generate all of the APRS messages
21933 Note that two of them are in NMEA form, which some receivers appear
21936 Signed-off-by: Keith Packard <keithp@keithp.com>
21938 commit 0c2c47dd7af2fc95de852178c4244daba02f44ed
21939 Author: Keith Packard <keithp@keithp.com>
21940 Date: Wed Dec 5 19:44:09 2012 -0800
21942 altos: Add test scaffolding for APRS
21944 This moves some test code out of ao_aprs.c and into ao_aprs_test.c,
21945 and then adds Makefile fragments to compile and run the resulting
21946 program, creating a wav file as output
21948 Signed-off-by: Keith Packard <keithp@keithp.com>
21950 commit d65751fded3321b8a350e4140c44f87fec95aab2
21951 Author: Keith Packard <keithp@keithp.com>
21952 Date: Wed Dec 5 19:30:27 2012 -0800
21954 altos: Make aprs code output encoded packets to stdout
21956 This generates a .wav file containing a single APRS packet. This has
21957 been tested and appears to be successfully decoded by an APRS receiver.
21959 Signed-off-by: Keith Packard <keithp@keithp.com>
21961 commit 024e35dc6a0356adfc801a023d5ec208cf3996cb
21962 Author: Keith Packard <keithp@keithp.com>
21963 Date: Wed Dec 5 09:59:16 2012 -0800
21965 altos: Add Pico Beacon code as ao_aprs.c
21967 Pico Beacon hooks a GPS to an AD9954 DDS radio chip with a PIC. It
21968 directly synthesizes the necessary AX.25 packets to do APRS
21969 reporting. We're going to appropriate the code for use in Mega Metrum
21970 to (optionally) broadcast APRS packets.
21972 http://ad7zj.net/kd7lmo/aprsbeacon_code.html
21974 Signed-off-by: Keith Packard <keithp@keithp.com>
21977 commit ce12787b56f699166cafe4cdee9e2a4d8e66ebed
21978 Author: Keith Packard <keithp@keithp.com>
21979 Date: Tue Dec 4 09:45:01 2012 -0800
21981 altos: Break out GPS speed resetting sequence
21983 To set the GPS speed, we delay for 1/2 sec, change speed, then delay
21984 for another 1/2 sec.
21986 Signed-off-by: Keith Packard <keithp@keithp.com>
21988 commit d1778937e136fdecf8607dd9b358cf972d87ca34
21989 Author: Keith Packard <keithp@keithp.com>
21990 Date: Tue Dec 4 09:43:56 2012 -0800
21992 altos: shrink ao_companion_status by merging printf calls
21994 Multiple printf calls are longer than one big one, so merge these
21995 together to save some code space
21997 Signed-off-by: Keith Packard <keithp@keithp.com>
21999 commit f6f440767eece896507903e6e58849f11088829f
22000 Author: Keith Packard <keithp@keithp.com>
22001 Date: Tue Dec 4 08:48:05 2012 -0800
22003 Another ao-mega addition which shouldn't be here
22005 Signed-off-by: Keith Packard <keithp@keithp.com>
22007 commit 1f52e8afce514a6b943c92aaa6d7189d11d9fe76
22008 Author: Keith Packard <keithp@keithp.com>
22009 Date: Tue Dec 4 01:34:03 2012 -0800
22011 ao-tools. Oops, let 'ao-mega' slip into build.
22013 This is a tool to parse ao-mega eeprom files; not sure it'll be that
22014 useful, and it's certainly not usable *yet*.
22016 Signed-off-by: Keith Packard <keithp@keithp.com>
22018 commit d4d5d411679d074295d4722f4887fd1cf4f0906c
22019 Author: Keith Packard <keithp@keithp.com>
22020 Date: Tue Dec 4 01:30:39 2012 -0800
22022 ao-sky-flash: Clean up debug printfs a bit
22024 This makes debugging output a bit cleaner
22026 Signed-off-by: Keith Packard <keithp@keithp.com>
22028 commit 5f6b3790667d9b92370b4fe0dad5626929fea2ba
22029 Author: Keith Packard <keithp@keithp.com>
22030 Date: Fri Nov 30 20:51:47 2012 -0800
22032 altos: Make skytraq reflashing code try both 9600 and 4800 baud
22034 This lets it communicate with the ROM code which boots at 4800 baud
22035 instead of 9600 baud.
22037 Signed-off-by: Keith Packard <keithp@keithp.com>
22039 commit dd8b2eadab12965d232640449b1d1c9f2484238c
22040 Author: Keith Packard <keithp@keithp.com>
22041 Date: Fri Nov 30 17:36:40 2012 -0800
22043 ao-tools: Add ao-sky-flash to update GPS firmware
22045 This uses a new feature of AltOS to directly connect the GPS chip to
22046 the USB link to reprogram the former.
22048 Signed-off-by: Keith Packard <keithp@keithp.com>
22050 commit 860d0526737295c695f8e6a790d72b49eb4a686d
22051 Author: Keith Packard <keithp@keithp.com>
22052 Date: Fri Nov 30 16:10:43 2012 -0800
22054 altos: Add support for reflashing skytraq GPS chips
22056 This simply switches the skytraq port to 115200 baud and then
22057 essentially connects it directly to the USB port by forwarding bytes
22058 in both directions.
22060 Once started, the only way out is to reboot the board.
22062 Signed-off-by: Keith Packard <keithp@keithp.com>
22064 commit c90ece979f3c95cc6c557c5a2ba8f4a0ce78e173
22065 Author: Keith Packard <keithp@keithp.com>
22066 Date: Fri Nov 30 16:08:41 2012 -0800
22068 altos: Expose GPS serial fifo on MegaMetrum
22070 Necessary for direct access by the GPS reflashing code
22072 Signed-off-by: Keith Packard <keithp@keithp.com>
22074 commit ae0ddb0f866a26867f0147e0811717810f74c9ef
22075 Author: Keith Packard <keithp@keithp.com>
22076 Date: Fri Nov 30 16:05:19 2012 -0800
22078 altos: Add ao_task_minimize_latency to reduce IRQ delays
22080 When set, this causes the task switching code to avoid blocking IRQs
22081 while looking for an idle task as that can increase IRQ latencies
22082 enough to drop characters at 115200 baud on the cc1111. Note that this
22083 *also* eliminates the ability to use low power modes as we cannot know
22084 at any point whether some interrupt has come along and woken a task.
22086 Has no effect when using task queues as those require IRQs to be
22087 blocked while looking at the queue. Shouldn't be a problem there
22088 though as the check for no running tasks is very cheap.
22090 Signed-off-by: Keith Packard <keithp@keithp.com>
22092 commit f2c2d04f07253a90c4f7da49df43c3969119516b
22093 Author: Keith Packard <keithp@keithp.com>
22094 Date: Fri Nov 30 16:04:24 2012 -0800
22096 altos: Use ao_xmemcpy in ao_log_telem.c
22098 This eliminates the libc generic version in TeleTerra
22100 Signed-off-by: Keith Packard <keithp@keithp.com>
22102 commit 7db14905af5cbbfa47d1a2026cce6aea9e5aae7a
22103 Author: Keith Packard <keithp@keithp.com>
22104 Date: Fri Nov 30 16:03:45 2012 -0800
22106 altos: Add support for 115200 baud serial rates
22108 Necessary for flashing skytraq chips
22110 Signed-off-by: Keith Packard <keithp@keithp.com>
22112 commit 0b65402361f36a0c722977bcb63edb26fda0db28
22113 Author: Keith Packard <keithp@keithp.com>
22114 Date: Fri Nov 30 16:01:07 2012 -0800
22116 altos: Make stdio 8-bit clean by making pollchar return int
22118 We were stealing one value (0xff) in the return value from pollchar to
22119 indicate 'not ready yet'. Instead of doing that, use the integer value
22120 -1 and have pollchar return an int instead of a char. That
22121 necessitated cleaning a few other bits to make sure that 0xff wouldn't
22122 get promoted to -1 on accident.
22124 Signed-off-by: Keith Packard <keithp@keithp.com>
22126 commit 0fa9ce23dd63846337872d6d666a469512614d07
22127 Author: Keith Packard <keithp@keithp.com>
22128 Date: Fri Nov 30 15:10:59 2012 -0800
22130 altos: Share cc1111 reset/debug-start code
22132 These sequences are very similar, differing only in whether the dbg
22133 clock line is toggled while holding reset low for a while.
22135 Signed-off-by: Keith Packard <keithp@keithp.com>
22137 commit cb01d968f21a171682e6358641edaf5eef815a66
22138 Author: Keith Packard <keithp@keithp.com>
22139 Date: Fri Nov 30 15:05:31 2012 -0800
22141 altos: Shrink cc1111/ao_dbg.c a bit
22143 Share code for osequence of ao_dbg_long_delay(); ao_dbg_send_bits()
22145 Signed-off-by: Keith Packard <keithp@keithp.com>
22147 commit 81648829defbaf49fc98c4520540f7a20c50c417
22148 Author: Keith Packard <keithp@keithp.com>
22149 Date: Fri Nov 30 15:04:21 2012 -0800
22151 altos: Share getnibble function
22153 Two implementations of the same function, one in cc1111/ao_dbg.c and
22154 the other in core/ao_send_packet.c.
22156 Signed-off-by: Keith Packard <keithp@keithp.com>
22158 commit 289ead258e217bc10493caab12a8b477f1bc2865
22159 Author: Keith Packard <keithp@keithp.com>
22160 Date: Thu Nov 29 20:36:51 2012 -0800
22162 altos: Make TeleBalloon v1.1 build again
22164 This is untested, but at least it builds now
22166 Signed-off-by: Keith Packard <keithp@keithp.com>
22168 commit ceea0e75ac42acac4a20bf88f34bb93fd2768f4c
22169 Merge: 7738ddc 285fccf
22170 Author: Bdale Garbee <bdale@gag.com>
22171 Date: Tue Nov 20 12:37:38 2012 -0700
22173 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
22175 commit 7738ddc5dcf4a9609ae2b066a783e3c9fa03d3be
22176 Author: Bdale Garbee <bdale@gag.com>
22177 Date: Tue Nov 20 12:36:26 2012 -0700
22179 let upstream version rule, don't force use of Debian version in firmware
22181 commit 285fccfa82d89b0decc3b44f413eef9d0c8f1e63
22182 Author: Keith Packard <keithp@keithp.com>
22183 Date: Sun Nov 18 10:36:17 2012 -0800
22185 altos: Slow down micropeak report timing
22187 This makes reading the LED a lot easier.
22189 Signed-off-by: Keith Packard <keithp@keithp.com>
22191 commit 8ff0db3979405357003b52022e564a3da75ec3fb
22192 Author: Keith Packard <keithp@keithp.com>
22193 Date: Sun Nov 18 10:35:39 2012 -0800
22195 altos: micropeak LED is orange now, not blue
22197 Change the names around to match
22199 Signed-off-by: Keith Packard <keithp@keithp.com>
22201 commit ba3532a8ca7083b09fde5827faeb95f0c2f3b07c
22202 Author: Keith Packard <keithp@keithp.com>
22203 Date: Sun Nov 18 10:20:52 2012 -0800
22205 doc: Minor updates to the micropeak docs
22207 Mention light issue in quick start guide. Update run-time estimate to
22208 40 hours (measured over 44 hours)
22210 Signed-off-by: Keith Packard <keithp@keithp.com>
22212 commit 1df3e6402489480e30600304bf024481902f9425
22213 Author: Keith Packard <keithp@keithp.com>
22214 Date: Sun Nov 18 10:15:14 2012 -0800
22216 altos: Clean everything, even if we don't have compilers
22218 This ensures that stale bits aren't left if PATH isn't set right when
22219 'make clean' is called.
22221 Signed-off-by: Keith Packard <keithp@keithp.com>
22223 commit c4737c81ee2da826b38cc52efbfb09017e6825ca
22224 Author: Keith Packard <keithp@keithp.com>
22225 Date: Sun Nov 18 10:13:49 2012 -0800
22227 altoslib: Reset telem tracking state when switching altimeters
22229 This discards any local state when the new telem packet has a
22230 different serial number
22232 Signed-off-by: Keith Packard <keithp@keithp.com>
22234 commit fcb801b145e1ae6f1c0b3418a99245d34dbf5aa4
22235 Author: Keith Packard <keithp@keithp.com>
22236 Date: Sun Nov 18 10:10:29 2012 -0800
22238 altoslib: Allow flight number to be zero
22240 It's zero when there's no storage space on the device. Instead of
22241 waiting for non-zero flight number, wait for the seen_flight bit to be
22242 set in the telem tracking state
22244 Signed-off-by: Keith Packard <keithp@keithp.com>
22246 commit c494eecc51f7d80e24e5db7af0021c56cb6871d4
22247 Author: Keith Packard <keithp@keithp.com>
22248 Date: Sun Nov 18 10:08:38 2012 -0800
22250 altoslib: MegaMetrum data telem packets have sensor data, not flight no
22252 Setting the seen_flight bit without a flight number leads to bogus
22255 Signed-off-by: Keith Packard <keithp@keithp.com>
22257 commit 70c9fc74a68fdb92569eb73295cfa154cf3768f4
22258 Author: Keith Packard <keithp@keithp.com>
22259 Date: Sun Nov 18 09:50:54 2012 -0800
22261 altos: Make Tm recovery mode set RF cal and callsign too
22263 This lets us connect to Tm even if someone messes up the RF
22264 calibration or callsign info
22266 Signed-off-by: Keith Packard <keithp@keithp.com>
22268 commit fa3beed645c7bff08d22a657daffe75059dc7b88
22269 Author: Keith Packard <keithp@keithp.com>
22270 Date: Sun Nov 18 08:46:31 2012 -0800
22272 altos: fix cc1120 radio test - state wasn't made static
22274 so whether the radio got turned on was random.
22276 Signed-off-by: Keith Packard <keithp@keithp.com>
22278 commit e037fbc004e1aa7d631ae999e587bdde2f6b71c9
22279 Author: Keith Packard <keithp@keithp.com>
22280 Date: Sat Nov 17 17:34:01 2012 -0800
22282 altoslib: Add (disabled) conversion for MS5611
22284 In case we actually end up shipping an MS5611-based board at some
22285 point, it will be nice to have the java code on hand
22287 Signed-off-by: Keith Packard <keithp@keithp.com>
22289 commit 0606dc013d8b89fd5de0548af0de20fdab5c27d4
22290 Author: Keith Packard <keithp@keithp.com>
22291 Date: Fri Nov 16 22:19:17 2012 -0800
22293 doc: Start updating AltOS documentation for multi-arch
22295 Now that AltOS supports many processors, start updating the
22296 documentation to match.
22298 Signed-off-by: Keith Packard <keithp@keithp.com>
22300 commit b3205a1d246e5ed229256aa787f26e6e122b7a2f
22301 Author: Keith Packard <keithp@keithp.com>
22302 Date: Thu Nov 1 17:52:22 2012 -0700
22304 altos: Build megadongle when possible
22306 Signed-off-by: Keith Packard <keithp@keithp.com>
22308 commit 793b950083d09ead4f6230e041ad43aa9f5f2179
22309 Author: Keith Packard <keithp@keithp.com>
22310 Date: Thu Nov 1 10:51:41 2012 -0700
22312 altos/megadongle: Add megadongle product
22314 Looks a lot like teledongle from a feature perspective.
22316 Signed-off-by: Keith Packard <keithp@keithp.com>
22318 commit f74d724f92b335d6c0674d0f1fcc650b729401df
22319 Author: Keith Packard <keithp@keithp.com>
22320 Date: Thu Nov 1 10:50:03 2012 -0700
22322 altos: Remove legacy telemetry from ao_monitor when not needed
22324 For products not supporting LEGACY_MONITOR, remove the (undefined)
22325 structs from the ao_monitor union.
22327 Signed-off-by: Keith Packard <keithp@keithp.com>
22329 commit e4d931cd99a7c91803584b71670e30c0d00217df
22330 Author: Keith Packard <keithp@keithp.com>
22331 Date: Thu Nov 1 10:49:17 2012 -0700
22333 altos: Remove 'volatile' from ao_rssi.c globals
22335 No need for this, the variables aren't changed at interrupt time.
22337 Signed-off-by: Keith Packard <keithp@keithp.com>
22339 commit 86f8b92149d1027b1d6d6b1cae097cfe47b02090
22340 Author: Keith Packard <keithp@keithp.com>
22341 Date: Thu Nov 1 10:48:08 2012 -0700
22343 altos/stm: Support LEDs on multiple ports
22345 Split out the bits in a fairly simplistic fashion so that we support
22346 no more than 16 LEDs still.
22348 Signed-off-by: Keith Packard <keithp@keithp.com>
22350 commit fcdaa0d748058a7f52a1bdc1a1627dc394762e5a
22351 Author: Keith Packard <keithp@keithp.com>
22352 Date: Tue Oct 30 19:56:51 2012 -0700
22354 altos/attiny: Remove debugging code which frobs PB1
22356 This was clearly stuck there to debug something; not a good idea...
22358 Signed-off-by: Keith Packard <keithp@keithp.com>
22360 commit af8cb40851a5cf5e3bd06ddd85e4e2df16bfbad2
22361 Author: Keith Packard <keithp@keithp.com>
22362 Date: Tue Oct 30 19:44:45 2012 -0700
22364 altos/micropeak: Run MS5607 at max resolution for micropeak
22366 We've got lots of time, so get the highest resolution baro data available.
22368 Signed-off-by: Keith Packard <keithp@keithp.com>
22370 commit 371da0c909098092db7b596496df9d58eed43703
22371 Author: Keith Packard <keithp@keithp.com>
22372 Date: Tue Oct 30 19:41:08 2012 -0700
22374 altos/micropeak: Clock micropeak at 250kHz to save power
22376 This reduces average current consumption from 2mA to .4mA. This
22377 makes the battery last longer, but also gets the current under
22378 something that the typical CR1025 battery can support. Would be nice
22379 to reduce current even further; cheap CR1025 batteries still seem to
22380 fade a bit at this current level.
22382 Signed-off-by: Keith Packard <keithp@keithp.com>
22384 commit e8a4a00a5bb333d4ee9601d53242a82dfe0372c2
22385 Author: Keith Packard <keithp@keithp.com>
22386 Date: Tue Oct 30 19:39:55 2012 -0700
22388 altos/attiny: Don't initialize the CS pin in the general SPI setup
22390 Let the CS pin be configured by the driver, which can set the correct
22391 value before enabling the output.
22393 Signed-off-by: Keith Packard <keithp@keithp.com>
22395 commit f7d2613bb0a6ab1c63e3f6252a3a2358fdfbc691
22396 Author: Keith Packard <keithp@keithp.com>
22397 Date: Mon Oct 29 17:07:05 2012 -0700
22399 altos/micropeak: Set boost detect to 10m. Add 30s boost delay.
22401 Wait for 30 seconds before even starting look for boost. This provides
22402 an opportunity to close up the airframe, potentially causing pressure
22403 gradients seen by the baro sensor.
22405 Also, require a 10m vertical motion before triggering boost. This
22406 should limit accidental boost detect while capturing any actual flights.
22408 Signed-off-by: Keith Packard <keithp@keithp.com>
22410 commit 0d0ece403028e8a4453cc380575ed95c5e00ddb7
22411 Author: Keith Packard <keithp@keithp.com>
22412 Date: Mon Oct 29 11:49:23 2012 -0700
22414 doc: Add micropeak manual
22416 Signed-off-by: Keith Packard <keithp@keithp.com>
22418 commit 424638446b7c7bb3f4aa6b4764d3e68175dcbf8c
22419 Author: Keith Packard <keithp@keithp.com>
22420 Date: Mon Oct 29 11:48:58 2012 -0700
22422 altos: Build micropeak when avr-gcc is available
22424 Signed-off-by: Keith Packard <keithp@keithp.com>
22426 commit e9ea0ad4024532fd6f87bb6708bf76b0c7aa1c5b
22427 Author: Keith Packard <keithp@keithp.com>
22428 Date: Mon Oct 29 11:47:17 2012 -0700
22430 altos/micropeak: Switch to MS5607 sensor. Require 4m for boost. Elide dead code
22432 Signed-off-by: Keith Packard <keithp@keithp.com>
22434 commit 0623bc06a77536b903da09acbd12999d0ed05360
22435 Author: Keith Packard <keithp@keithp.com>
22436 Date: Mon Oct 29 11:43:02 2012 -0700
22438 altos/attiny: Update to new interrupt macros
22440 Add ao_arch_block/release_interrupts macros to attiny architecture
22442 Signed-off-by: Keith Packard <keithp@keithp.com>
22444 commit a46c9398a5f02ff4b52b7a4309a51498560cadb5
22445 Merge: e57ab2a 56023cf
22446 Author: Keith Packard <keithp@keithp.com>
22447 Date: Fri Oct 26 14:08:32 2012 -0700
22449 Merge remote-tracking branch 'mjb/altosdroid'
22451 commit e57ab2a7bfb69c0ef9b5b7fa8e53e20a500e7c6c
22452 Author: Keith Packard <keithp@keithp.com>
22453 Date: Thu Oct 25 13:42:10 2012 -0700
22455 altos: Provide ao_task_alarm_tick to reduce per-tick cost
22457 Cache the next wakeup time and check that before jumping to the task
22460 Signed-off-by: Keith Packard <keithp@keithp.com>
22462 commit ccf0faa7d26d56deca7928b521d07be40504466a
22463 Author: Keith Packard <keithp@keithp.com>
22464 Date: Thu Oct 25 13:40:54 2012 -0700
22466 altos: Leave interrupts disabled while checking for task to run
22468 Otherwise, we run the risk of an interrupt waking a task after we've
22469 decided to idle the CPU.
22471 Signed-off-by: Keith Packard <keithp@keithp.com>
22473 commit 9b978cd467f9128f3069765dd8fbf8abad3459a4
22474 Author: Keith Packard <keithp@keithp.com>
22475 Date: Thu Oct 25 13:38:13 2012 -0700
22477 altos: Clean up stm arch macros a bit.
22479 Turn a bunch of the macros into inline functions.
22480 Clean up the reboot method to use the stm_scb structure.
22482 Signed-off-by: Keith Packard <keithp@keithp.com>
22484 commit 7ee031bdab33cc6a1e2a7995a7c3a43f3a64b687
22485 Author: Keith Packard <keithp@keithp.com>
22486 Date: Thu Oct 25 13:35:47 2012 -0700
22488 altos: Clean up cc1111 architecture macros a bit, removing cli/sei
22490 Just reformatting changes, aside from the removal of cli/sei
22492 Signed-off-by: Keith Packard <keithp@keithp.com>
22494 commit ff6a439cd24e239abd97107ecedf12dca71e59a5
22495 Author: Keith Packard <keithp@keithp.com>
22496 Date: Thu Oct 25 13:33:43 2012 -0700
22498 altos: Wrap ao_container_of value in parens
22500 Keeps the cast from being separated from the value when used
22503 Signed-off-by: Keith Packard <keithp@keithp.com>
22505 commit f221c78e6237e0a118ebe85c25e433fe16a7735d
22506 Author: Keith Packard <keithp@keithp.com>
22507 Date: Thu Oct 25 11:25:42 2012 -0700
22509 altos: Switch drivers to ao_arch_block/release_interrupts
22511 Stop using cli/sei, which are avr-specific
22513 Signed-off-by: Keith Packard <keithp@keithp.com>
22515 commit 56023cf5da9deede9fe627fe327783eceecf08f7
22516 Author: Mike Beattie <mike@ethernal.org>
22517 Date: Thu Oct 25 20:39:20 2012 +1300
22519 altosdroid: more restrictive commit no. matching
22521 Signed-off-by: Mike Beattie <mike@ethernal.org>
22523 commit bb3f42daffafb497639c2c678f6106ce54523ff3
22524 Author: Mike Beattie <mike@ethernal.org>
22525 Date: Thu Oct 25 20:31:59 2012 +1300
22527 altosdroid: more reliable branch detection
22529 Signed-off-by: Mike Beattie <mike@ethernal.org>
22531 commit 963f7715be6c67056bbd8bbe898639adac64fc29
22532 Author: Keith Packard <keithp@keithp.com>
22533 Date: Thu Oct 25 00:12:57 2012 -0700
22535 Bump version to 1.1.9.2
22537 Signed-off-by: Keith Packard <keithp@keithp.com>
22539 commit 282f0451dd141db3304ab73e4020a849e59721eb
22540 Merge: 0680d62 78e1de4
22541 Author: Keith Packard <keithp@keithp.com>
22542 Date: Thu Oct 25 00:09:01 2012 -0700
22544 Merge remote-tracking branch 'mjb/altosdroid'
22546 commit 0680d62d57496cea7ae4f1ef317c46e689b28e21
22547 Author: Keith Packard <keithp@keithp.com>
22548 Date: Thu Oct 25 00:04:27 2012 -0700
22550 altos/megametrum: Depend on Makefile contents for build
22552 This ensures that everything is rebuilt when the Makefile changes
22554 Signed-off-by: Keith Packard <keithp@keithp.com>
22556 commit b49c751749dcd3e78991463c098f8d916f52179d
22557 Author: Keith Packard <keithp@keithp.com>
22558 Date: Wed Oct 24 23:50:55 2012 -0700
22560 altos: Add task queues.
22562 This replaces the array-based scheduler with a queue-based one
22563 instead. It should have the same basic scheduling semantics, but it
22564 walks shorter lists for each operation, making it much more efficient
22565 when the system has a lot of tasks.
22567 Signed-off-by: Keith Packard <keithp@keithp.com>
22569 commit 4b13d3c659240e5a8347b1ba7ab0bf1d8355eba3
22570 Author: Keith Packard <keithp@keithp.com>
22571 Date: Wed Oct 24 22:46:55 2012 -0700
22573 altos: Add stack-guard code. Uses STM MPU to trap stack overflow.
22575 This marks the lowest portion of the stack as inaccessible to the CPU,
22576 causing the processor to fault when it reaches it. The fault then
22577 generates a panic message so that the user can know what happened.
22579 Signed-off-by: Keith Packard <keithp@keithp.com>
22581 commit e80fa6de4ccc5c4851eab9fb941f9282d2e3eb16
22582 Author: Keith Packard <keithp@keithp.com>
22583 Date: Wed Oct 24 22:35:32 2012 -0700
22585 altos: Replace __critical usage with ao_arch_critical as needed
22587 sdcc offers __critical as a machine-independent way to block
22588 interrupts, but as gcc doesn't, we need to use a compiler-independent
22589 construct instead. ao_arch_critical has been around since the AVR
22590 port, but some old __critical usages remained.
22592 This fixes a bunch of random hangs when communicating with MM over USB
22593 or the radio as the various stdio loops were running without
22594 interrupts blocked between the test and the sleep.
22596 Signed-off-by: Keith Packard <keithp@keithp.com>
22598 commit b119e19604aa557a40e848c60d98a67b5f259bbd
22599 Author: Keith Packard <keithp@keithp.com>
22600 Date: Tue Oct 23 22:17:49 2012 -0700
22602 altos: profiling on STM32L
22604 Add sample-based profiling, using a 1kHz timer
22606 Signed-off-by: Keith Packard <keithp@keithp.com>
22608 commit 7d34811ba035367bbf26a8510265754f3fbb5a95
22609 Author: Keith Packard <keithp@keithp.com>
22610 Date: Wed Oct 24 23:21:38 2012 -0700
22612 altos: Add ao_arch_block/release_interrupts to avr and cc1111
22614 Stop using cli/sei for AVR, add replacement to __critical for cc1111
22616 Signed-off-by: Keith Packard <keithp@keithp.com>
22618 commit 09aa379fc57cd4f30c18c7bda2532a79109354c2
22619 Author: Keith Packard <keithp@keithp.com>
22620 Date: Wed Oct 24 23:55:00 2012 -0700
22622 altos: Force beep timer regs reload when enabling beeper
22624 Without this, there can be a long delay between asking for the beeper
22625 and having it actually start sounding.
22627 Signed-off-by: Keith Packard <keithp@keithp.com>
22629 commit 097c931c979d3652ef8e279ba66bb7ce758f37a3
22630 Author: Keith Packard <keithp@keithp.com>
22631 Date: Wed Oct 24 23:52:49 2012 -0700
22633 altos: When slave mode first starts, accept any packet
22635 This eliminates the packet sequence matching for the first packet,
22636 allowing outstanding send data to arrive from the master instead of
22637 ignoring packets with data until they match the seqno
22639 Signed-off-by: Keith Packard <keithp@keithp.com>
22641 commit 978c16105dd334a4a2807140dbbcc7f306a6b581
22642 Author: Keith Packard <keithp@keithp.com>
22643 Date: Wed Oct 24 23:55:45 2012 -0700
22645 altosui: Allow AltosConfig to abort before serial line starts
22647 Check to see if the serial line is active before trying to close it.
22649 Signed-off-by: Keith Packard <keithp@keithp.com>
22651 commit 78e1de481bfdbf7c7bb908c317b23c8ee275c84f
22652 Author: Mike Beattie <mike@ethernal.org>
22653 Date: Wed Oct 24 20:54:18 2012 +1300
22655 altosdroid: Add version information to UI
22657 Signed-off-by: Mike Beattie <mike@ethernal.org>
22659 commit 5ad62b07bef41921b46cb7251072dc24290ee4c9
22660 Author: Mike Beattie <mike@ethernal.org>
22661 Date: Wed Oct 24 20:52:09 2012 +1300
22663 altosdroid: Add branch to BuildInfo
22665 Signed-off-by: Mike Beattie <mike@ethernal.org>
22667 commit 055f3232decc07e064d596469b81cf9869411c2d
22668 Merge: 8ca58e2 9e60fa2
22669 Author: Bdale Garbee <bdale@gag.com>
22670 Date: Tue Oct 23 09:38:36 2012 -0600
22672 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
22674 commit 8ca58e20208495ce63b8256a8ffa43932867e8d5
22675 Author: Bdale Garbee <bdale@gag.com>
22676 Date: Tue Oct 23 09:33:17 2012 -0600
22678 remove local copy of launch-sites.txt and reference to old web location
22680 commit 37a09f1edc57924dabcf2a71794a42e37b5a354c
22681 Author: Mike Beattie <mike@ethernal.org>
22682 Date: Tue Oct 23 19:22:52 2012 +1300
22684 altosdroid: match only the current version tag
22686 Don't match non version tags - and always return the long format of
22687 git describe, rather than just the tag (when the tag is on the current
22690 Split the commit number/hash more reliably by removing the version tag
22691 from the result first.
22693 Signed-off-by: Mike Beattie <mike@ethernal.org>
22695 commit 9e60fa214ad2c48fbe8f7e5c437681aa35d249fa
22696 Merge: 27c3157 4b41561
22697 Author: Keith Packard <keithp@keithp.com>
22698 Date: Mon Oct 22 22:39:31 2012 -0700
22700 Merge remote-tracking branch 'mjb/altosdroid'
22702 commit 27c31572f4f63c2282e1cc583f4402337fcb548a
22703 Author: Keith Packard <keithp@keithp.com>
22704 Date: Mon Oct 22 22:38:46 2012 -0700
22706 altosui: Allow any non-basestation to be configured
22708 TelePyro has some configuration bits.
22710 Signed-off-by: Keith Packard <keithp@keithp.com>
22712 commit 79f4e684713cff6bf999cac52f5d9525a6f7d278
22713 Author: Keith Packard <keithp@keithp.com>
22714 Date: Mon Oct 22 21:39:12 2012 -0700
22716 altos: make check-avr-mem utility executable
22718 Signed-off-by: Keith Packard <keithp@keithp.com>
22720 commit d4ea2e7c3ed84fb6f4e880da6c5ddf2a83d3ef61
22721 Author: Keith Packard <keithp@keithp.com>
22722 Date: Mon Oct 22 21:38:18 2012 -0700
22724 altos: Allow pyro flight state config to be set
22726 Without these lines, flight state compares can't be shown or set.
22728 Signed-off-by: Keith Packard <keithp@keithp.com>
22730 commit e80d7cd18fa4dac98d941e86b5956403a7170966
22731 Author: Keith Packard <keithp@keithp.com>
22732 Date: Mon Oct 22 21:37:25 2012 -0700
22734 altos: Let AVR products override the stack size. Set telepyro to 104
22736 Otherwise, telepyro doesn't have enough ram...
22738 Signed-off-by: Keith Packard <keithp@keithp.com>
22740 commit 20496608ca287e65302193ee1afe9f0cad3a36e1
22741 Author: Keith Packard <keithp@keithp.com>
22742 Date: Mon Oct 22 21:36:12 2012 -0700
22744 altoslib: capitalize 'Invalid' state name appropriately
22746 It shouldn't ever appear, but it seemed wrong to have it not match the
22747 rest of the strings.
22749 Signed-off-by: Keith Packard <keithp@keithp.com>
22751 commit fe00d1169c65cb289f77093cf281efbd0a5d4e64
22752 Author: Keith Packard <keithp@keithp.com>
22753 Date: Mon Oct 22 21:35:06 2012 -0700
22755 altosui/altoslib: Add support for configuring pyro channels
22757 This provides a UI on devices which have pyro channels other than
22760 Signed-off-by: Keith Packard <keithp@keithp.com>
22762 commit fd619a01bf3489b1df017aca20362757b087ec11
22763 Author: Keith Packard <keithp@keithp.com>
22764 Date: Mon Oct 22 08:52:08 2012 -0700
22766 altos: Add state comparisons to pyro channel conditions
22768 Let pyro channels block waiting for flight state changes. This
22769 allows for pyro channels to be synchronized with the main iginiter
22772 Signed-off-by: Keith Packard <keithp@keithp.com>
22774 commit 4b41561abf9144e73995ccc18eadad7936d1dd15
22775 Author: Mike Beattie <mike@ethernal.org>
22776 Date: Mon Oct 22 11:55:07 2012 +1300
22778 altosdroid: add autogenerated BuildInfo.java
22780 * Generated by shell script that parses git describe
22781 * Makefile rule to call script on every run
22782 * also includes eclipse hooks to call shell script on build
22784 Signed-off-by: Mike Beattie <mike@ethernal.org>
22786 commit 8cb09f8a3e2dae5f7f3d2d3dbbc81ba40b491e75
22787 Author: Keith Packard <keithp@keithp.com>
22788 Date: Sun Oct 21 20:57:21 2012 -0700
22790 altosdroid: AltosState now has speed and max_speed funcs
22792 These pull out the appropriate baro/accel speed values and may use
22793 some fancier values in future.
22795 Signed-off-by: Keith Packard <keithp@keithp.com>
22797 commit e4ee3a35dbb1586f65adada0eaf34b7b4e5432eb
22798 Author: Keith Packard <keithp@keithp.com>
22799 Date: Sun Oct 21 19:51:02 2012 -0700
22801 altoslib: Add AltosRecordNone.java
22803 oops. forgot a file.
22805 Signed-off-by: Keith Packard <keithp@keithp.com>
22807 commit e16c33545640f745cec8dc595b2343359efced57
22808 Author: Keith Packard <keithp@keithp.com>
22809 Date: Sun Oct 21 17:26:16 2012 -0700
22811 altos/test: Use MMA655X in ao_flight_test_mm. Add run-mm to plot mm data
22813 Pull MMA655X data out of eeprom file when available. Switch build to
22814 using MMA655x by default.
22816 Clone run-one to plot a single mm flight
22818 Signed-off-by: Keith Packard <keithp@keithp.com>
22820 commit f789b0b94eb01e3875f7711ce053658c31e75fad
22821 Author: Keith Packard <keithp@keithp.com>
22822 Date: Sun Oct 21 17:00:08 2012 -0700
22824 altosui: Handle .mega files in Landed tab 'Graph Flight' button
22826 Need to check for .mega files here too.
22828 Signed-off-by: Keith Packard <keithp@keithp.com>
22830 commit 6a1a1dae3e00bfcddf31c447f915245a7d42e566
22831 Author: Keith Packard <keithp@keithp.com>
22832 Date: Sun Oct 21 16:55:00 2012 -0700
22834 altos: Document mega log packet types
22836 Just add comments to ao_log.h so it's easy to remember which labels go
22839 Signed-off-by: Keith Packard <keithp@keithp.com>
22841 commit 89c621be35e1a6d3394b0e143391fcf2d94d7b41
22842 Author: Keith Packard <keithp@keithp.com>
22843 Date: Sun Oct 21 16:53:23 2012 -0700
22845 altoslib: Parse GPS .mega file entries for reply/graphing
22847 The .mega file parsing had a pile of leftovers from when it was cloned
22848 from the .eeprom file parsing code. Replace all of that with the right
22849 parsing bits so that GPS data will be presented correctly.
22851 Signed-off-by: Keith Packard <keithp@keithp.com>
22853 commit 7894c27b2b2c3c46a7c107c8acd5977830f006cf
22854 Author: Keith Packard <keithp@keithp.com>
22855 Date: Sun Oct 21 16:13:14 2012 -0700
22857 altoslib: Move computed state from AltosRecord to AltosState
22859 Make AltosRecord simply track the raw data and have AltosState hold
22860 all computed values, including cross-packet averages and computed speeds.
22862 Signed-off-by: Keith Packard <keithp@keithp.com>
22864 commit dec2e455935a71dec13b84bb886252b7f4a1a641
22865 Author: Keith Packard <keithp@keithp.com>
22866 Date: Sun Oct 21 14:11:07 2012 -0700
22868 altoslib: Compute accelerometer speed from megametrum eeprom data
22870 Duplicates code from the TM eeprom state tracking code.
22872 Signed-off-by: Keith Packard <keithp@keithp.com>
22874 commit dcadf5e55f076604b0b168be0060026110e263ed
22875 Author: Keith Packard <keithp@keithp.com>
22876 Date: Sun Oct 21 14:10:32 2012 -0700
22878 altoslib: remove a couple of TM log record types from MM log parsing
22880 PRESSURE and DEPLOY log records don't occurin MM eeprom files.
22882 Signed-off-by: Keith Packard <keithp@keithp.com>
22884 commit 1f5a453cb4650fc97cc990a9e42242278c29cc04
22885 Author: Keith Packard <keithp@keithp.com>
22886 Date: Sun Oct 21 13:42:00 2012 -0700
22888 altoslib: MegaMetrum eeprom never loses GPS date
22890 TeleMetrum had a firmware bug that would fail to record the GPS date
22891 and time correctly, that was hacked around in altosui, but isn't
22892 needed for MegaMetrum. Remove those hacks from the MM path.
22894 Signed-off-by: Keith Packard <keithp@keithp.com>
22896 commit 84a144e8b479550406323bc3b2cf89026b770746
22897 Author: Keith Packard <keithp@keithp.com>
22898 Date: Sun Oct 21 13:02:40 2012 -0700
22900 altosui: Correct megametrum eeprom filename date
22902 Was fetching day-of-month from the year field
22904 Signed-off-by: Keith Packard <keithp@keithp.com>
22906 commit db0bbf76b5d739b5d7628bc9139dc8fecd501ac3
22907 Author: Keith Packard <keithp@keithp.com>
22908 Date: Sun Oct 21 13:02:05 2012 -0700
22910 altosui: Add new filename filters
22912 Allow the user to restrict filenames to telem, eeprom or mega files
22914 Signed-off-by: Keith Packard <keithp@keithp.com>
22916 commit eea141b2f35722bad4cd31d9484d6d794646f815
22917 Author: Keith Packard <keithp@keithp.com>
22918 Date: Sun Oct 21 13:01:03 2012 -0700
22920 altos/stm: Stop spewing clock out PA8 pin
22922 This was used to debug the clock bringup, but is not useful anymore,
22923 and probably a bad idea to boot.
22925 Signed-off-by: Keith Packard <keithp@keithp.com>
22927 commit 7f664da148ae15d46d179d8ecede6fc0bc710ffb
22928 Merge: 3aba5eb 23b0c2f
22929 Author: Keith Packard <keithp@keithp.com>
22930 Date: Thu Oct 18 16:49:28 2012 -0700
22932 Merge branch 'master' into pwmin-new
22934 commit 23b0c2fe95dbfaa4a8ce603b56b75d12d2c17d8c
22935 Author: Keith Packard <keithp@keithp.com>
22936 Date: Thu Oct 18 16:19:38 2012 -0700
22938 altosui: Re-add a couple of "unused" values
22940 The values in these calls aren't needed, but the side-effects are, so
22943 Signed-off-by: Keith Packard <keithp@keithp.com>
22945 commit 05173876d5984a54929db486c9ce1e19bde79526
22946 Author: Keith Packard <keithp@keithp.com>
22947 Date: Thu Oct 18 16:02:59 2012 -0700
22949 Bump version to 1.1.9.1
22951 Prepare for Rocketober/Thrustration
22953 Signed-off-by: Keith Packard <keithp@keithp.com>
22955 commit ceb42f4c96076b01ac05577c9fe461b66e72d30d
22956 Author: Keith Packard <keithp@keithp.com>
22957 Date: Thu Oct 18 15:34:41 2012 -0700
22959 altos/megametrum: Switch back to using the MS5607
22961 We're planning to ship the MS5607
22963 Signed-off-by: Keith Packard <keithp@keithp.com>
22965 commit 5a55501660ebab3b858a48483c5df1cfb4e858e4
22966 Merge: 0361235 440365b
22967 Author: Keith Packard <keithp@keithp.com>
22968 Date: Thu Oct 18 15:18:52 2012 -0700
22970 Merge branch 'master' into mm-ms5611
22972 Signed-off-by: Keith Packard <keithp@keithp.com>
22974 commit 3aba5eb5a75dff3e7c8778561c533903eacb110a
22975 Author: Keith Packard <keithp@keithp.com>
22976 Date: Tue Oct 16 22:33:34 2012 -0700
22978 altos: Build telescience-pwm product when possible
22980 Signed-off-by: Keith Packard <keithp@keithp.com>
22982 commit f34f0ac7f355149446374a4c82dbf004919bc2dd
22983 Author: Keith Packard <keithp@keithp.com>
22984 Date: Tue Oct 16 22:21:04 2012 -0700
22986 altos: Add telescience-pwm product
22988 Split out special PWM-sampling telescience product
22990 Signed-off-by: Keith Packard <keithp@keithp.com>
22992 commit 14698c424f833dc6d2fb38f69f5f661804cf8303
22993 Author: Keith Packard <keithp@keithp.com>
22994 Date: Tue Oct 16 22:17:25 2012 -0700
22996 altos: Only enable PWM on telescience_pwm product
22998 Signed-off-by: Keith Packard <keithp@keithp.com>
23000 commit ac318c19594569532f1fa53b639eefa28d9b7c34
23001 Author: Robert Garbee <robert@gag.com>
23002 Date: Wed Jul 18 18:41:00 2012 -0600
23004 telescience: correctly calculating rate values with higher resolution
23006 commit da7ac5e95575f6aa1d2514748869771b7686c0e1
23007 Author: Robert Garbee <robert@gag.com>
23008 Date: Wed Jul 18 14:24:05 2012 -0600
23012 commit ed5aa2329985ffbaba74514e0555f67fc378a8d8
23013 Author: Robert Garbee <robert@gag.com>
23014 Date: Wed Jul 18 13:41:27 2012 -0600
23016 Timer 3 working with slower clock and all 16 bits.
23018 commit 1d7e6f5dcb29535cde9b7dfd6998d7889baf835b
23019 Author: Robert Garbee <robert@gag.com>
23020 Date: Tue Jul 17 13:23:48 2012 -0600
23022 first work on PWM input to TeleScience, 'p' command displays timer 1
23024 commit 1747ab07dab6f4e977e0c3e83b57510cd668e369
23025 Author: Robert Garbee <robert@gag.com>
23026 Date: Thu Jul 19 11:40:20 2012 -0600
23028 telescience: steal last adc channel for icp3 most recent value
23029 Make the ICP3 rpm counter use in ao_adc_avr.c optional
23031 Signed-off-by: Keith Packard <keithp@keithp.com>
23033 commit 440365bd17d804c2f574c35164612cf1682397d7
23034 Author: Keith Packard <keithp@keithp.com>
23035 Date: Tue Oct 16 21:54:23 2012 -0700
23037 altosui: Accept serial number of zero for eeprom download
23039 AVR-based products don't have a valid serial number, and so usually
23040 report 0. Accept this by making the 'no serial number' case check for
23043 Signed-off-by: Keith Packard <keithp@keithp.com>
23045 commit 4d6d90e15db30991bf81060a0876ae8adb843c75
23046 Author: Keith Packard <keithp@keithp.com>
23047 Date: Tue Oct 16 21:08:58 2012 -0700
23049 altos/avr: Use ISR_BLOCK to disable interrupts during slave ISR
23051 This avoids enabling and then immediatly disabling them
23053 Signed-off-by: Keith Packard <keithp@keithp.com>
23055 commit b8d8b23ca5e6c2d3a19f8aeda2764b43d25eb9d6
23056 Author: Keith Packard <keithp@keithp.com>
23057 Date: Tue Oct 16 17:14:05 2012 -0700
23059 altosui: Print exception stack trace when tracking flights
23061 More useful in fixing the problem
23063 Signed-off-by: Keith Packard <keithp@keithp.com>
23065 commit ef9cb19d8b210e02eaa1c657833c1bd5fc619ad8
23066 Author: Keith Packard <keithp@keithp.com>
23067 Date: Tue Oct 16 17:13:04 2012 -0700
23069 altosui: Handle missing pad distance in descent tab
23071 When the GPS isn't locked, the distance from the pad cannot be
23072 computed and is left missing. Not crashing in this case is more useful.
23074 Signed-off-by: Keith Packard <keithp@keithp.com>
23076 commit 60880bda2153ba3122c7102cd2bacbcca73b9e0d
23077 Author: Keith Packard <keithp@keithp.com>
23078 Date: Mon Oct 15 00:24:57 2012 -0700
23080 altos/telelco: Make the RSSI led turn red when no packet is received
23082 This involved splitting out the notion of ever having received an
23083 answer and having received an answer from the last query.
23085 Signed-off-by: Keith Packard <keithp@keithp.com>
23087 commit 5f31f6652f4b0898214d06d009af823a1ed3b96a
23088 Author: Keith Packard <keithp@keithp.com>
23089 Date: Mon Oct 15 00:24:28 2012 -0700
23091 altos/telelco: 10ms is not enough time to get a packet back
23093 Not reliable, so bump to 20ms
23095 Signed-off-by: Keith Packard <keithp@keithp.com>
23097 commit fdc00ec143022356bf8cdbb28812f045b439c549
23098 Author: Keith Packard <keithp@keithp.com>
23099 Date: Mon Oct 15 00:07:57 2012 -0700
23101 altos/telelco: Only display every 10th box number during scan
23103 This reduces the scan time to about 4 seconds, which seems tolerable
23105 Signed-off-by: Keith Packard <keithp@keithp.com>
23107 commit c6069e38d6d2f9b37aa8671c41b4a470d92996a4
23108 Author: Keith Packard <keithp@keithp.com>
23109 Date: Mon Oct 15 00:06:57 2012 -0700
23111 altos/telelco: Crank up SPI speed to cc1111
23113 The cc1111 can handle up to 3MHz, so use 2MHz. Also, crank down the
23114 packet wait time to 10ms, which should be plenty long for the remote
23115 box to receive and return a packet.
23117 Signed-off-by: Keith Packard <keithp@keithp.com>
23119 commit 80227c08444d5c82fd43320644cdeec6f34fee1b
23120 Author: Keith Packard <keithp@keithp.com>
23121 Date: Mon Oct 15 00:06:10 2012 -0700
23123 altos/stm: Declare all SPI bus speeds
23125 Just list them all so users can pick what they like
23127 Signed-off-by: Keith Packard <keithp@keithp.com>
23129 commit 44c13005f34fdf7d4831e86e1f3e8729e9b67a68
23130 Author: Keith Packard <keithp@keithp.com>
23131 Date: Sun Oct 14 23:40:58 2012 -0700
23133 altos/telelco: Actually set pad when it changes
23135 Oops. Lost the actual assignment to the current pad
23137 Signed-off-by: Keith Packard <keithp@keithp.com>
23139 commit b042f3d6e6b3241cd5e55cf893242ea599d3c0e9
23140 Author: Keith Packard <keithp@keithp.com>
23141 Date: Sun Oct 14 23:24:49 2012 -0700
23143 altos/telelco: Handle case where no boxes are present
23145 Don't infinite loop looking for something which isn't there
23147 Signed-off-by: Keith Packard <keithp@keithp.com>
23149 commit 56ebb0a2f50fd56f4f0b0c695e516bee8fae36fb
23150 Author: Keith Packard <keithp@keithp.com>
23151 Date: Sun Oct 14 23:16:45 2012 -0700
23153 altos/telelco: Only present valid pads
23155 Limit pad display to valid pads, skipping missing ones.
23157 Signed-off-by: Keith Packard <keithp@keithp.com>
23159 commit 84c56b1e92fca181207c468ea6351db3c2f196fb
23160 Author: Keith Packard <keithp@keithp.com>
23161 Date: Sun Oct 14 23:04:44 2012 -0700
23163 altos/telefire: Report valid channels instead of valid pins
23165 Now that pins don't match channels 1:1, make sure that the report back
23166 to the LCO names the channels instead of the pin numbers.
23168 Signed-off-by: Keith Packard <keithp@keithp.com>
23170 commit 91b8c8b20cead2836ec835f44b4ca0cf06cbf518
23171 Author: Keith Packard <keithp@keithp.com>
23172 Date: Sat Oct 13 15:04:46 2012 -0700
23174 altos/test: Display MPU6000 values in ao_flight_test_mm output
23176 No computation yet, just making the values visible in the output
23178 Signed-off-by: Keith Packard <keithp@keithp.com>
23180 commit c6eec0bec06d2e246ea3c9552818ad3180c1e318
23181 Author: Keith Packard <keithp@keithp.com>
23182 Date: Sat Oct 13 15:04:00 2012 -0700
23184 altos: Define full-scale gyro and accel values for MPU6000
23186 This lets other code convert MPU6000 readings into canonical units
23188 Signed-off-by: Keith Packard <keithp@keithp.com>
23190 commit 5caf56e89678637c1afa79700a2fa09aa67dea9b
23191 Author: Keith Packard <keithp@keithp.com>
23192 Date: Sat Oct 13 15:02:42 2012 -0700
23194 altos: When missing MMA655x, create fake Z accel value
23196 This avoids overwriting the MPU6000 y acceleration value so that other
23197 computations using that value can work unmodified.
23199 Signed-off-by: Keith Packard <keithp@keithp.com>
23201 commit 321d0f68c04a5a9c6ea7874081e6245d44c48bb4
23202 Author: Keith Packard <keithp@keithp.com>
23203 Date: Sat Oct 13 13:39:03 2012 -0700
23205 altos/test: Add ao_flight_test_mm
23207 This reads mega metrum eeprom files and runs the flight code over it
23209 Signed-off-by: Keith Packard <keithp@keithp.com>
23211 commit 0ec77f5c90e0b930488ae2ab75efcbba8a3bd1d8
23212 Author: Keith Packard <keithp@keithp.com>
23213 Date: Sat Oct 13 13:37:29 2012 -0700
23215 altos: Eliminate implicit 1 byte offset in uint16/int16 functions
23217 Make callers explicitly compute the full offset
23219 Signed-off-by: Keith Packard <keithp@keithp.com>
23221 commit 2733d1b71bbac2c5ef4a2c3a1992ba448e981267
23222 Author: Keith Packard <keithp@keithp.com>
23223 Date: Sat Oct 13 13:35:42 2012 -0700
23225 altos: Split out ms5607 conversion code for use in ao_flight_test
23227 Makes the conversion code available even where the driver isn't needed
23229 Signed-off-by: Keith Packard <keithp@keithp.com>
23231 commit 46abd248fb2eb84f161672ffce121b2203d42be0
23232 Author: Keith Packard <keithp@keithp.com>
23233 Date: Sat Oct 13 13:34:28 2012 -0700
23235 altos: struct ao_log_mega doesn't have a ground temp value
23237 There's no averaged ground temperature recorded in the flight system
23238 to save there, so just remove the field
23240 Signed-off-by: Keith Packard <keithp@keithp.com>
23242 commit eea1c8da986f9dbd0ca58c926a2bbe01721c1bda
23243 Author: Keith Packard <keithp@keithp.com>
23244 Date: Sat Oct 13 13:33:45 2012 -0700
23246 altos: Document a few member offsets in struct ao_log_record
23248 Incomplete, but useful even so
23250 Signed-off-by: Keith Packard <keithp@keithp.com>
23252 commit c607bd1442e60fec1421955c996f6aad1d98647a
23253 Author: Keith Packard <keithp@keithp.com>
23254 Date: Sat Oct 13 13:32:56 2012 -0700
23256 altosui: Parse .mega files from command line
23258 Signed-off-by: Keith Packard <keithp@keithp.com>
23260 commit 162a21dc423c2883a54f7d2a154871ae714d1552
23261 Author: Keith Packard <keithp@keithp.com>
23262 Date: Fri Oct 12 14:27:14 2012 -0700
23264 altos: Add .gitignore for micropeak
23266 Signed-off-by: Keith Packard <keithp@keithp.com>
23268 commit 6cfb2d3b1c75916ee69d069519edc675e37e1aa1
23269 Author: Keith Packard <keithp@keithp.com>
23270 Date: Fri Oct 12 14:26:08 2012 -0700
23272 altos: Add (untested) driver for AT24C i2c flash parts
23274 Signed-off-by: Keith Packard <keithp@keithp.com>
23276 commit b9bf8e01e243508297f28b102cb2477dc1bc74df
23277 Author: Keith Packard <keithp@keithp.com>
23278 Date: Fri Oct 12 14:22:41 2012 -0700
23280 altos: Add initial micropeak implementation
23282 Blinks out max height in decimeters, stores previous flight data to
23285 Signed-off-by: Keith Packard <keithp@keithp.com>
23287 commit 9c732effeb2ef4a4d8bc9599febed74a6ec2f466
23288 Author: Keith Packard <keithp@keithp.com>
23289 Date: Fri Oct 12 14:18:37 2012 -0700
23291 altos: Allow products to define which LED to panic with
23293 Continue to use AO_LED_RED by default.
23295 Signed-off-by: Keith Packard <keithp@keithp.com>
23297 commit 767b74e1466ad4e31746340081d6d60e40359425
23298 Author: Keith Packard <keithp@keithp.com>
23299 Date: Fri Oct 12 14:08:19 2012 -0700
23301 altos: Megametrum uses altitude-pa.h, not altitude.h
23303 Make sure megametrum gets rebuilt as needed when the various
23304 altitude-pa related files change
23306 Signed-off-by: Keith Packard <keithp@keithp.com>
23308 commit 64500ab11ab76d2309608f8e02a1dd9658963b3e
23309 Author: Keith Packard <keithp@keithp.com>
23310 Date: Fri Oct 12 14:04:57 2012 -0700
23312 altos: Add attiny architecture files
23314 These are designed to work with the ATtiny85 processor, but can
23315 presuambly be easily adapted to others in that series
23317 Signed-off-by: Keith Packard <keithp@keithp.com>
23319 commit 16bad3b6ab65cf31b19152127cb6af69142c5c12
23320 Author: Keith Packard <keithp@keithp.com>
23321 Date: Fri Oct 12 14:03:28 2012 -0700
23323 altos: Include struct ao_data declaration only when used
23325 Leave it out for products that don't have a ring of sensor data
23327 Signed-off-by: Keith Packard <keithp@keithp.com>
23329 commit 7751c9cbc630f7251b8988f8da68be9a54ff552c
23330 Author: Keith Packard <keithp@keithp.com>
23331 Date: Fri Oct 12 14:02:29 2012 -0700
23333 altos: Clean up types in Pa conversion testing code. Only test to 40km
23335 A couple of missing 'int' declarations.
23336 Only test to 40km as above that there aren't enough data points to do
23337 anything reasonable
23339 Signed-off-by: Keith Packard <keithp@keithp.com>
23341 commit 866d10b3faa96f6c5a2c495a2c12a0d2bc8259ef
23342 Author: Keith Packard <keithp@keithp.com>
23343 Date: Fri Oct 12 14:01:16 2012 -0700
23345 altos: Elide ao_altitude_to_pa in flight firmware
23347 Only the conversion testing code needs to get back from altitude to
23348 pressure, so don't include that code in other environments.
23350 Signed-off-by: Keith Packard <keithp@keithp.com>
23352 commit 68308908afbd1f04b17056d2be408c89b3578c86
23353 Author: Keith Packard <keithp@keithp.com>
23354 Date: Fri Oct 12 13:59:50 2012 -0700
23356 altos: Parameterize altitude table access and initialization
23358 This allows projects to store the altitude data in different
23359 representations or with different access modes.
23361 By default, altitude data is stored in meters, but the initializers
23362 include decimeter values so those can be used instead if desired.
23364 Signed-off-by: Keith Packard <keithp@keithp.com>
23366 commit 175380a436efa35bbfae2ee5e29e12e9ef86fbde
23367 Author: Keith Packard <keithp@keithp.com>
23368 Date: Fri Oct 12 13:57:49 2012 -0700
23370 altos: Use alt_t for all Pascal-based altitude data
23372 This allows alt_t to be overridden for systems using the MS5607/MS5611
23375 Signed-off-by: Keith Packard <keithp@keithp.com>
23377 commit be0a28ee7a6fbd98fc8113db8501bb791a112fa0
23378 Author: Keith Packard <keithp@keithp.com>
23379 Date: Fri Oct 12 13:55:33 2012 -0700
23381 altos: Allow for other mutex implementations
23383 Allow projects to replace ao_mutex_get and ao_mutex_put with macros
23385 Signed-off-by: Keith Packard <keithp@keithp.com>
23387 commit 6a3ee911353291b04e161d50a181ed4211d467a2
23388 Author: Keith Packard <keithp@keithp.com>
23389 Date: Fri Oct 12 13:54:37 2012 -0700
23391 altos: Allow projects to specify clock at other than 100Hz
23393 Leave the default at 100Hz, but allow it to be overridden
23395 Signed-off-by: Keith Packard <keithp@keithp.com>
23397 commit 7795d8309b3e1147bc37d31a0adde42d7dee6cd1
23398 Author: Keith Packard <keithp@keithp.com>
23399 Date: Fri Oct 12 13:37:07 2012 -0700
23401 altos: Prepare ms5607 driver for use in non-tasking products
23403 Micropeak doesn't have tasking, prepare the ms5607 driver for that
23405 Signed-off-by: Keith Packard <keithp@keithp.com>
23407 commit a07b8ba166e05e7d1722c59651ef00e9fb7580d5
23408 Author: Keith Packard <keithp@keithp.com>
23409 Date: Fri Oct 12 13:31:17 2012 -0700
23411 altos: Split task definitions out to ao_task.h
23413 And only include them if using tasks
23415 Signed-off-by: Keith Packard <keithp@keithp.com>
23417 commit 3f059f8878a79b3154a19b6803fbc367eda80dc9
23418 Author: Keith Packard <keithp@keithp.com>
23419 Date: Wed Oct 10 14:28:07 2012 -0700
23421 altos/telefire: Add siren/strobe support
23423 This also involved hacking up the code to allow for non-zero offsets
23424 for the pad firing and continuity pins.
23426 Signed-off-by: Keith Packard <keithp@keithp.com>
23428 commit 0361235c9ef56738ba0e97be88a85afef0ce8268
23429 Author: Keith Packard <keithp@keithp.com>
23430 Date: Mon Oct 8 23:24:19 2012 -0700
23432 altos: Fix up ms5607 and mma655x commands to work again
23434 These just display the most recently fetched values
23436 Signed-off-by: Keith Packard <keithp@keithp.com>
23438 commit 39c5738acdfdf0c87b64de6135fe107971cfa12b
23439 Author: Keith Packard <keithp@keithp.com>
23440 Date: Mon Oct 8 23:04:16 2012 -0700
23442 altos: Go back to recording sensor data in globals
23444 Instead of trying to get things into the ring from a variety of
23445 functions, go back to the simpler method of storing them in globals
23446 and having the ADC code just pluck out the most recent values.
23448 Signed-off-by: Keith Packard <keithp@keithp.com>
23450 commit 422799d9be36ef71b63c1c0fd80d5e76da802949
23451 Author: Keith Packard <keithp@keithp.com>
23452 Date: Mon Oct 8 21:59:55 2012 -0700
23454 altos: Compute desired frequency when upgrading from pre-1.1
23456 Instead of just smashing the frequency to 434.550, compute the
23457 frequency from the old radio channel value
23459 Signed-off-by: Keith Packard <keithp@keithp.com>
23461 commit 16bbe9d25856259d2694751c364b668638e4a971
23462 Author: Keith Packard <keithp@keithp.com>
23463 Date: Sun Oct 7 15:40:41 2012 -0700
23465 altos/megametrum: Try running accel and baro in parallel again
23467 Now that the baro sensor appears to be working, try running
23468 conversions in parallel to see if that makes the accel cal happy
23470 Signed-off-by: Keith Packard <keithp@keithp.com>
23472 commit 6d47dd1d9104745cf68bef23b066c5033ca30a84
23473 Author: Keith Packard <keithp@keithp.com>
23474 Date: Sat Oct 6 19:39:15 2012 -0700
23476 altos/stm: Set SPI clock high for disabled SPI busses
23478 This should avoid an accidental low->high transition when switching
23479 between multiple SPI busses.
23481 Signed-off-by: Keith Packard <keithp@keithp.com>
23483 commit d4b1dffeef3e9ea96e143f74782e4da7d116c0d4
23484 Author: Keith Packard <keithp@keithp.com>
23485 Date: Sat Oct 6 18:25:15 2012 -0700
23487 altos/telefire: Make sure armed alarm goes off on time
23489 Instead of turning the alarm off when a packet is received after the
23490 deadline, just do it in the thread which is awake all of the time.
23492 This prevents the alarm from sticking on when the LCO box is turned
23493 off while the arming key is on.
23495 Signed-off-by: Keith Packard <keithp@keithp.com>
23497 commit 35cb2dc51708ab572a4c72422e5902a313eda58e
23498 Author: Keith Packard <keithp@keithp.com>
23499 Date: Sat Oct 6 17:56:23 2012 -0700
23501 altos/stm: Clean up SPI pin configuration code
23503 Make sure none of the pin configurations are being used at startup
23504 time. Split out the pin configuration into separate functions.
23506 Signed-off-by: Keith Packard <keithp@keithp.com>
23508 commit 41add569413bf3ec564195963277c81f2d2da798
23509 Author: Keith Packard <keithp@keithp.com>
23510 Date: Sat Oct 6 17:21:55 2012 -0700
23512 altos/drivers: Use data ring values for MS5607 presentation
23514 Signed-off-by: Keith Packard <keithp@keithp.com>
23516 commit 0b28eefe6b32033a0e85731aa38af7e07a8b45f5
23517 Author: Keith Packard <keithp@keithp.com>
23518 Date: Sat Oct 6 17:21:10 2012 -0700
23520 altos/megametrum: Make MS5607 driver hold SPI bus for whole operation
23522 Signed-off-by: Keith Packard <keithp@keithp.com>
23524 commit c676ad8048d10ad9da22ea3acf19e4e1872103ff
23525 Author: Keith Packard <keithp@keithp.com>
23526 Date: Sat Oct 6 17:05:59 2012 -0700
23528 altos/megametrum: Use mma655x for acceleration measurements now
23530 Signed-off-by: Keith Packard <keithp@keithp.com>
23532 commit 82fdc42d61340e6b76580ff12a9e1bea59eb8079
23533 Merge: 6b8881a 2cac8c5
23534 Author: Keith Packard <keithp@keithp.com>
23535 Date: Wed Oct 3 10:44:28 2012 -0700
23537 Merge branch 'master' into mm-ms5611
23539 commit 2cac8c572ce533ded89dae9a412b4d1b5c748342
23540 Author: Keith Packard <keithp@keithp.com>
23541 Date: Wed Oct 3 10:43:28 2012 -0700
23543 altos: Re-enable the ms5607 and mma655x acquisition threads
23545 These were disabled to help with testing in Argonia
23547 Signed-off-by: Keith Packard <keithp@keithp.com>
23549 commit 6b8881a7bdb9f89306a700e9a8853b00df29bf5d
23550 Author: Keith Packard <keithp@keithp.com>
23551 Date: Wed Oct 3 07:50:48 2012 -0700
23553 altos/megametrum: Commit for boards with MS5611 baro sensor
23555 Signed-off-by: Keith Packard <keithp@keithp.com>
23557 commit fdd08cc093134c5f87dab9533b99a042a699381b
23558 Author: Keith Packard <keithp@keithp.com>
23559 Date: Fri Sep 28 22:39:55 2012 -0700
23561 altos: Provide MS5611 configuration option, HAS_MS5611
23563 MS5611 and MS5607 use slightly different conversion functions. Alas,
23564 there doesn't appear to be a way to tell them apart in software. This
23565 patch adds the necessary conversion changes and makes them depend on a
23566 compile-time configuration option.
23568 Signed-off-by: Keith Packard <keithp@keithp.com>
23570 commit dc7216d286cc7fe8007f5208ad97a630166572f3
23571 Author: Keith Packard <keithp@keithp.com>
23572 Date: Fri Sep 21 13:29:17 2012 +0200
23574 altos: Shrink Pa to altitude table
23576 This improves the computation of the table enough that errors from a
23577 470 entry table are almost all < 0.5m.
23579 Signed-off-by: Keith Packard <keithp@keithp.com>
23581 commit 7c6231ecef2e4f978a0de452a17a2a24e6e68827
23582 Author: Keith Packard <keithp@keithp.com>
23583 Date: Thu Sep 20 11:33:24 2012 +0200
23585 Bump revision to 1.2 development branch
23587 With 1.1 out the door, this now starts the 1.2 development series
23589 Signed-off-by: Keith Packard <keithp@keithp.com>
23591 commit 2f2734bb418f5c3a89fa3f1bf1b98ce4cfe432e1
23592 Merge: e69a433 3fe5c2f
23593 Author: Keith Packard <keithp@keithp.com>
23594 Date: Thu Sep 20 11:30:19 2012 +0200
23596 Merge remote-tracking branch 'mjb/altosdroid'
23598 commit e69a433fd93b9f6bd2297d8045eb075fee29e73b
23599 Merge: 19243ec 6e0d672
23600 Author: Keith Packard <keithp@keithp.com>
23601 Date: Thu Sep 20 11:30:11 2012 +0200
23603 Merge remote-tracking branch 'mjb/prefs_interface'
23605 commit 19243ecc9b5bbdcc069ae24acf1ca807322c84d8
23606 Merge: 90c1b6d 0ef8b71
23607 Author: Keith Packard <keithp@keithp.com>
23608 Date: Thu Sep 20 11:29:55 2012 +0200
23610 Merge remote-tracking branch 'mjb/altosui_mjb'
23612 commit 3fe5c2f9fc01258d45c20070e9874d76bc6c8c07
23613 Author: Mike Beattie <mike@ethernal.org>
23614 Date: Tue Sep 18 23:47:50 2012 +1200
23616 altosdroid: initial implementation of telemetry logging.
23618 Signed-off-by: Mike Beattie <mike@ethernal.org>
23620 commit 0541201d4afe3e5d7913465e1db10e586d7182bb
23621 Author: Mike Beattie <mike@ethernal.org>
23622 Date: Tue Sep 18 23:47:06 2012 +1200
23624 altoslib: make parts of AltosLog public for usage outside altoslib.
23626 Signed-off-by: Mike Beattie <mike@ethernal.org>
23628 commit c058ec2d6070458a0b7d3ef56041e985412ee565
23629 Author: Mike Beattie <mike@ethernal.org>
23630 Date: Tue Sep 18 23:46:17 2012 +1200
23632 altos{lib,ui,droid}: move OS specific code out of altoslib
23634 This is to allow the usage of AltosLog on Android - no swing, so
23635 we need to push the "home directory" code used to pick a default
23636 telemetry logging path - using the PreferencesBackend interface
23639 Signed-off-by: Mike Beattie <mike@ethernal.org>
23641 commit 36e684724e327dbd4319411ef0602fafb4d0c073
23642 Author: Mike Beattie <mike@ethernal.org>
23643 Date: Tue Sep 18 23:43:18 2012 +1200
23645 altosdroid: cosmetic re-order of methods
23647 Signed-off-by: Mike Beattie <mike@ethernal.org>
23649 commit 8f11a6d2c3de228c3cefb95a7d1a76d53e532acd
23650 Author: Mike Beattie <mike@ethernal.org>
23651 Date: Tue Sep 18 23:42:11 2012 +1200
23653 altosdroid: simplify keys() method
23655 Signed-off-by: Mike Beattie <mike@ethernal.org>
23657 commit f79b445cc29fc1e424f99c97e71c7d3637bf4ba6
23658 Author: Mike Beattie <mike@ethernal.org>
23659 Date: Tue Sep 18 23:38:12 2012 +1200
23661 altosdroid: Update Makefile.am
23663 Signed-off-by: Mike Beattie <mike@ethernal.org>
23665 commit 90c1b6db8d1f401a992fe44983b3df64739fe263
23666 Author: Bdale Garbee <bdale@gag.com>
23667 Date: Sun Sep 16 15:12:26 2012 -0600
23669 further refinment of Releasing document
23671 commit 7a0cce7fa0c802b1597fef94cfaf00aa0c28c988
23672 Author: Bdale Garbee <bdale@gag.com>
23673 Date: Sun Sep 16 13:59:21 2012 -0600
23677 commit 0cd443d5e55b2c3b97ecf53389ff76bc4bc6018f
23678 Author: Keith Packard <keithp@keithp.com>
23679 Date: Sun Sep 16 12:38:33 2012 -0700
23681 Add release notes for version 1.1.1
23683 Signed-off-by: Keith Packard <keithp@keithp.com>
23685 commit fe8ab96e8727c25c04cac473cafb264cf7e80156
23686 Author: Mike Beattie <mike@ethernal.org>
23687 Date: Mon Sep 17 01:29:33 2012 +1200
23689 altosdroid: implement AltosPreferencesBackend, and initialize.
23691 Signed-off-by: Mike Beattie <mike@ethernal.org>
23693 commit 52d3cad4f744140e1aa06fdfc0d49a0cf8734fd4
23694 Merge: 31f5a02 6e0d672
23695 Author: Mike Beattie <mike@ethernal.org>
23696 Date: Sun Sep 16 22:27:04 2012 +1200
23698 Merge branch 'prefs_interface' into altosdroid
23700 commit cb48dd0b03b445437f751028e8383610b65b0a68
23701 Author: Keith Packard <keithp@keithp.com>
23702 Date: Sun Sep 16 02:39:25 2012 -0700
23704 altos: Fix telemini sdcdb init file
23706 Set the driver source path for the debugger
23708 Signed-off-by: Keith Packard <keithp@keithp.com>
23710 commit 3520bbf1ed6461d1ce7af001c529563a3cffa3c9
23711 Author: Keith Packard <keithp@keithp.com>
23712 Date: Sun Sep 16 00:58:20 2012 -0700
23714 altosui: Gather Tm sensor data in Monitor Idle mode
23716 Tm is pretty much the same as TM for the analog sensors, it's just
23717 missing the accelerometr. Use the same code for constructing an
23720 Signed-off-by: Keith Packard <keithp@keithp.com>
23722 commit 31f5a02654cbf172beed25f4c518dfb7be8c714e
23723 Author: Keith Packard <keithp@keithp.com>
23724 Date: Fri Sep 14 16:56:04 2012 -0700
23726 altos: Need to use 16-bit counts for ao_xmem functions
23728 Trying to use 8-bit counts is a nice optimization which fails when the
23729 count is larger than 255, as is the case with clearing the flash block
23730 in the AT45 driver. This bug resulted in the inability to erase
23731 flights on TeleMetrum v1.0 boards.
23733 Signed-off-by: Keith Packard <keithp@keithp.com>
23735 commit b898cf0a2abf2b0478d5afc5aca030c6b4c8bd0b
23736 Author: Keith Packard <keithp@keithp.com>
23737 Date: Fri Sep 14 12:59:31 2012 -0700
23739 altosui: Show over-ground-distance in Descent tab
23741 Helps to know where the rocket might land.
23743 Signed-off-by: Keith Packard <keithp@keithp.com>
23745 commit f36f73b2d02b72201683cf5795851034bbd6f28e
23746 Author: Keith Packard <keithp@keithp.com>
23747 Date: Fri Sep 14 12:58:54 2012 -0700
23749 altosui: Remove debugging from KML export
23751 Left in from testing the Eeprom export bug
23753 Signed-off-by: Keith Packard <keithp@keithp.com>
23755 commit 97ab77d548964115e4b41ad5952194fcd1455c96
23756 Author: Keith Packard <keithp@keithp.com>
23757 Date: Fri Sep 14 11:13:02 2012 -0700
23759 altosui: Fix Landed tab units
23761 And clean up the whole flight value reporting code base. It would be
23762 nice to create a separate class to make this easier; at present
23763 there's a bunch of customization embedded in how values are presented
23766 Reported by: Bdale Garbee <bdale@gag.com>
23767 Signed-off-by: Keith Packard <keithp@keithp.com>
23769 commit 43e646657502f6162fa02f37fd2bd5aa3e29a1a8
23770 Author: Keith Packard <keithp@keithp.com>
23771 Date: Fri Sep 14 11:08:57 2012 -0700
23773 altoslib: Update GPS seen_values in AltosEepromIterable
23775 Otherwise, KML export won't ever get GPS data to write.
23777 Reported by: Bob Brown <prefect@kloudbusters.org>
23778 Signed-off-by: Keith Packard <keithp@keithp.com>
23780 commit 7b6dd9105ba36aa11d6d0ee6e0823965b9beffb9
23781 Author: Keith Packard <keithp@keithp.com>
23782 Date: Fri Sep 14 11:08:19 2012 -0700
23784 altoslib: Remove duplicate seen_ values in AltosEepromIterable
23786 These are defined in AltosRecord; duplicating them is not a good plan
23788 Signed-off-by: Keith Packard <keithp@keithp.com>
23790 commit 6e0d672b8a516a604d8ea1abd2bed113c608143f
23791 Author: Mike Beattie <mike@ethernal.org>
23792 Date: Fri Sep 14 12:43:21 2012 +1200
23794 altosui: remove un-used import
23796 Signed-off-by: Mike Beattie <mike@ethernal.org>
23798 commit f985ea055d935b10ae9ae8441fe808ba2c13c99e
23799 Author: Mike Beattie <mike@ethernal.org>
23800 Date: Fri Sep 14 01:27:22 2012 +1200
23802 altosui: revert AltosUIPreferences init() method
23804 Signed-off-by: Mike Beattie <mike@ethernal.org>
23806 commit 9335a74694df00c4876055e7c98661236646f6e5
23807 Author: Mike Beattie <mike@ethernal.org>
23808 Date: Fri Sep 14 01:08:53 2012 +1200
23810 altosui: Add return to try/catch.. duh
23812 Signed-off-by: Mike Beattie <mike@ethernal.org>
23814 commit d5e199c34ff5a02a4c4cc917c3f0eec32eae72a9
23815 Author: Mike Beattie <mike@ethernal.org>
23816 Date: Fri Sep 14 01:06:59 2012 +1200
23818 altosui: add missing try/catch
23820 Signed-off-by: Mike Beattie <mike@ethernal.org>
23822 commit 26c83bc0981036651a89c29771b2ad52c8fb0396
23823 Author: Mike Beattie <mike@ethernal.org>
23824 Date: Fri Sep 14 01:03:53 2012 +1200
23826 altosui/altoslib: bug fixes, update Makefile.am
23828 Signed-off-by: Mike Beattie <mike@ethernal.org>
23830 commit 08345b8909922f2ff8f9ed8b4497b9cbea6b26e9
23831 Author: Mike Beattie <mike@ethernal.org>
23832 Date: Fri Sep 14 00:53:56 2012 +1200
23834 altosui/altoslib: Add call to …Preferences.init() with backend object, remove static init()
23836 Signed-off-by: Mike Beattie <mike@ethernal.org>
23838 commit 17127847300de9a6782b901926a3fcb9ef021b78
23839 Author: Mike Beattie <mike@ethernal.org>
23840 Date: Fri Sep 14 00:46:34 2012 +1200
23842 altoslib: Add AltosPreferencesBackend.java to Makefile.am
23844 Signed-off-by: Mike Beattie <mike@ethernal.org>
23846 commit d875b459b5e9f7bcbbbbe318f947b0451ce6738f
23847 Author: Mike Beattie <mike@ethernal.org>
23848 Date: Fri Sep 14 00:44:59 2012 +1200
23850 altosui/altoslib: add methods to interface, fix imports/exceptions in BT code
23852 Signed-off-by: Mike Beattie <mike@ethernal.org>
23854 commit 67b618409a0d34fff26cac6025bc159ff92ede9c
23855 Author: Mike Beattie <mike@ethernal.org>
23856 Date: Fri Sep 14 00:40:16 2012 +1200
23858 altosui: add missing methods for Backend, fix BT code.
23860 Signed-off-by: Mike Beattie <mike@ethernal.org>
23862 commit ec036e8fe057f4b641ba9ee17d6dce2689816047
23863 Author: Mike Beattie <mike@ethernal.org>
23864 Date: Fri Sep 14 00:25:49 2012 +1200
23866 altoslib/altosui: begin moving preferences "backend" into interface
23868 Signed-off-by: Mike Beattie <mike@ethernal.org>
23870 commit 0ef8b7148784ed5bcbea21dde313fb02f50ef734
23871 Author: Mike Beattie <mike@ethernal.org>
23872 Date: Fri Sep 14 13:17:24 2012 +1200
23874 altosui: comment out obsolete code - could probably remove the file.
23876 Signed-off-by: Mike Beattie <mike@ethernal.org>
23878 commit 6daf71d0af7ffdbbfdb7436edd536bc811850d42
23879 Author: Mike Beattie <mike@ethernal.org>
23880 Date: Fri Sep 14 13:16:48 2012 +1200
23882 altosui: add type to … implements Comparable.
23884 Signed-off-by: Mike Beattie <mike@ethernal.org>
23886 commit d3d69bdecfcb45d1e3a8c6b10c80eef1afcc2310
23887 Author: Mike Beattie <mike@ethernal.org>
23888 Date: Fri Sep 14 13:16:16 2012 +1200
23890 altosui: comment out/remove dead code
23892 Signed-off-by: Mike Beattie <mike@ethernal.org>
23894 commit c9fa8faabb6f7fb59714c42e1029ce3d71c52ff8
23895 Author: Mike Beattie <mike@ethernal.org>
23896 Date: Fri Sep 14 13:15:36 2012 +1200
23898 altosui: access class variables by class, not instance
23900 Signed-off-by: Mike Beattie <mike@ethernal.org>
23902 commit f9e1c5949a24e27897587b0b0ca00e089f362215
23903 Author: Mike Beattie <mike@ethernal.org>
23904 Date: Fri Sep 14 13:15:07 2012 +1200
23906 altosui: remove redundant catches
23908 Signed-off-by: Mike Beattie <mike@ethernal.org>
23910 commit 38fb6c070ffaf820d524fecce540d91fc6dda57b
23911 Author: Mike Beattie <mike@ethernal.org>
23912 Date: Fri Sep 14 13:14:31 2012 +1200
23914 altosui: comment out un-used classes and associated imports
23916 Signed-off-by: Mike Beattie <mike@ethernal.org>
23918 commit ce1b19a012a2c1c623b03efb93b881e297736718
23919 Author: Mike Beattie <mike@ethernal.org>
23920 Date: Fri Sep 14 13:13:35 2012 +1200
23922 altosui: comment out un-used fields and methods
23924 Signed-off-by: Mike Beattie <mike@ethernal.org>
23926 commit 382c54a0d052c8975b57c995ef83bc8934bde242
23927 Author: Mike Beattie <mike@ethernal.org>
23928 Date: Fri Sep 14 13:09:58 2012 +1200
23930 altosui: remove un-used imports
23932 Signed-off-by: Mike Beattie <mike@ethernal.org>
23934 commit eefcfa94f360f8c5a7233370d4178525bccbb22f
23935 Author: Bdale Garbee <bdale@gag.com>
23936 Date: Thu Sep 13 16:13:42 2012 -0600
23938 add note about checking doc copyright date and revision history to Releasing
23940 commit 2441090f26c3df66a6ce48d64e64384ce9e5ef82
23941 Author: Keith Packard <keithp@keithp.com>
23942 Date: Thu Sep 13 15:12:33 2012 -0700
23944 doc: Add revision history for 1.1. Update copyright date
23946 Signed-off-by: Keith Packard <keithp@keithp.com>
23948 commit 320d90c376dccfe1599505e3b485df8d46e34bb3
23949 Merge: 9a7d643 2e6c6a6
23950 Author: Bdale Garbee <bdale@gag.com>
23951 Date: Thu Sep 13 15:36:37 2012 -0600
23953 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
23955 commit 2e6c6a6c15a7cff9f20b70a4cf58697da1302f01
23956 Author: Keith Packard <keithp@keithp.com>
23957 Date: Thu Sep 13 00:35:27 2012 -0700
23959 doc: Document imperial units and groundstation configuration
23961 What it says on the tin.
23963 Signed-off-by: Keith Packard <keithp@keithp.com>
23965 commit 9a7d6431777ce3377b788ddac6cb9fadd53c039c
23966 Merge: 2439f53 9728b20
23967 Author: Bdale Garbee <bdale@gag.com>
23968 Date: Thu Sep 13 00:58:30 2012 -0600
23970 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
23972 commit 9728b20a4ad9576ac1022dc9a5771f5a3eb92b3d
23973 Author: Keith Packard <keithp@keithp.com>
23974 Date: Wed Sep 12 23:56:18 2012 -0700
23976 altosui: Exit with an error status when file processing fails
23978 If the user provides any files on the command line, and if processing
23979 them fails in some way, exit immediately with an error indication.
23981 Signed-off-by: Keith Packard <keithp@keithp.com>
23983 commit 0564f9b13d4e3050b0a45fc1c4f710ab2b1f9d81
23984 Author: Keith Packard <keithp@keithp.com>
23985 Date: Wed Sep 12 22:40:57 2012 -0700
23987 altosui: Leave new_gps indication until gps value is used
23989 During replay, AltosState may not see a new GPS value as soon as it
23990 lands in the state field as additional records with the same timestamp
23991 may come in after the GPS record.
23993 Instead of resetting the new_gps indication when the new record is
23994 created, wait until the new_gps indication is seen by the AltosState
23995 update code and have that clear the new_gps indication.
23997 Signed-off-by: Keith Packard <keithp@keithp.com>
23999 commit 7e237920abb582d7ceb3e1925b11a848575ac68a
24000 Author: Keith Packard <keithp@keithp.com>
24001 Date: Wed Sep 12 21:32:25 2012 -0700
24003 altosui: Stop downloading eeprom data on a block full of invalid data
24005 When no valid records are found within an eeprom block, we assume that
24006 no more data will be found within the entire storage area.
24008 Signed-off-by: Keith Packard <keithp@keithp.com>
24010 commit 2439f53ea21c84f7c510dc191dde025ada24281f
24011 Author: Bdale Garbee <bdale@gag.com>
24012 Date: Wed Sep 12 21:50:25 2012 -0600
24014 document workaround for 'make fat' not building altoslib
24016 commit 07d9ba938f2742da1bce5d8df55cbc236207a981
24017 Author: Bdale Garbee <bdale@gag.com>
24018 Date: Wed Sep 12 19:50:07 2012 -0600
24020 update Releasing for non-native versioning and builds on debian branch
24022 commit fe009534ce6846b6db96cac8f6c2d53ba8010d91
24023 Merge: 69d42b2 8ee29fe
24024 Author: Bdale Garbee <bdale@gag.com>
24025 Date: Wed Sep 12 19:49:51 2012 -0600
24027 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
24029 commit 8ee29fe48771dd22a0c5428761ee53a728495d11
24030 Author: Keith Packard <keithp@keithp.com>
24031 Date: Wed Sep 12 16:07:41 2012 -0700
24033 altosui: Serialize data access in TD config code
24035 Setting the values was being done in the UI thread instead of the
24036 Serial thread, which left the serial thread with uninitialized values
24037 when it went to update the displayed value for the current
24038 frequency. All fixed now.
24040 Signed-off-by: Keith Packard <keithp@keithp.com>
24042 commit 19e35de47157923670b1864ce7b04f8d82f3bdea
24043 Author: Keith Packard <keithp@keithp.com>
24044 Date: Wed Sep 12 16:06:59 2012 -0700
24046 altosui: Lock access to preferences data
24048 These are accessed by several different threads, so keep things sane
24049 by just holding locks across all access.
24051 Signed-off-by: Keith Packard <keithp@keithp.com>
24053 commit 1b5340c2b75c500011355c4889da443c4b9c4891
24054 Author: Keith Packard <keithp@keithp.com>
24055 Date: Wed Sep 12 13:07:01 2012 -0700
24057 altosui: Add multi-sized icons to all windows
24059 This lets the window system pick a better size for presentation
24061 Signed-off-by: Keith Packard <keithp@keithp.com>
24063 commit 3e4fc0b3953655eb720372d9b4274cd4bca19556
24064 Author: Tom Marble <tmarble@info9.net>
24065 Date: Wed Sep 12 10:05:42 2012 -0500
24067 Reference specific dependent jars in the AltosUI launchers
24069 commit f0f4f907042e12815284abe1b63ae2d4a5a2d598
24070 Author: Keith Packard <keithp@keithp.com>
24071 Date: Wed Sep 12 02:30:59 2012 -0700
24073 doc: Mention changes to flight data download UI
24075 Signed-off-by: Keith Packard <keithp@keithp.com>
24077 commit 42bbe15512533f2d958b8219a02fbd256593092a
24078 Author: Keith Packard <keithp@keithp.com>
24079 Date: Wed Sep 12 02:26:32 2012 -0700
24081 altosui: Initialize flight velocity to zero when reading eeprom files
24083 Otherwise, the integration of velocity will start at MISSING and get
24084 stranger. Fortunately, we know the initial velocity of the rocket when
24085 sitting on the pad.
24087 Signed-off-by: Keith Packard <keithp@keithp.com>
24089 commit b3c3c6eabd6837f0e72acee3906c8f71c6f0030e
24090 Author: Keith Packard <keithp@keithp.com>
24091 Date: Tue Sep 11 23:37:20 2012 -0700
24093 altosui: Don't say a decimal point for distances in meters
24095 Useful for distances in miles, but not meters.
24097 Signed-off-by: Keith Packard <keithp@keithp.com>
24099 commit 87f9a8923656f275f74cfb6c8c6a57bbe59e74f8
24100 Author: Keith Packard <keithp@keithp.com>
24101 Date: Tue Sep 11 23:36:26 2012 -0700
24103 altosui: Initialize imperial units checkbox with correct value
24105 Use imperial units preference instead of serial debug preference. Cut
24106 & paste programming failure...
24108 Signed-off-by: Keith Packard <keithp@keithp.com>
24110 commit 69d42b26223b45df4167aa3baafba100ad71baab
24111 Merge: 3e9078c 3fa5fbd
24112 Author: Bdale Garbee <bdale@gag.com>
24113 Date: Wed Sep 12 00:26:21 2012 -0600
24115 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
24117 commit 3fa5fbdfd1ab257028f272fbc32759b39608ddaf
24118 Author: Keith Packard <keithp@keithp.com>
24119 Date: Tue Sep 11 23:04:19 2012 -0700
24121 Clean up Windows event handles on com port close
24123 This avoids having to wait for the receiver to timeout before we can
24124 open the same com port again.
24126 This patch also adds a bit more debugging -- it prints Windows error
24127 messages to stdout along with the file/line where the error was generated.
24129 Signed-off-by: Keith Packard <keithp@keithp.com>
24131 commit 1a154ce0b9fc3ea360d6bc7e17d6debb2da94438
24132 Author: Keith Packard <keithp@keithp.com>
24133 Date: Tue Sep 11 22:03:17 2012 -0700
24135 Include AltosLib.jar in windows install
24137 Otherwise, altosui doesn't do much.
24139 Signed-off-by: Keith Packard <keithp@keithp.com>
24141 commit 3e9078cb1077e7ad0d845f10c2ad0a007df76d29
24142 Author: Bdale Garbee <bdale@gag.com>
24143 Date: Tue Sep 11 22:17:22 2012 -0600
24147 commit 4563624638884b7b2f16cd4d396c00690e045999
24148 Merge: 11fbcf5 e5a55db
24149 Author: Tom Marble <tmarble@info9.net>
24150 Date: Tue Sep 11 22:50:18 2012 -0500
24152 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
24154 commit 11fbcf5e30e0cd09f2d6b448911d2ef62b7f29c7
24155 Author: Tom Marble <tmarble@info9.net>
24156 Date: Tue Sep 11 22:48:04 2012 -0500
24158 Added the feature to AC to default --with-android to $ANDROID_SDK (if set)
24159 Fixed typos in altosui/Makefile.am (had removed JCOMMON, but it's from AC)
24161 - added android sdk
24162 - will now record artifacts: altoslib/AltosLib.jar,altosui/altosui.jar,**/*.apk
24164 commit e5a55dbf265354e7c94be3e2be53c2d5c8fba056
24165 Author: Keith Packard <keithp@keithp.com>
24166 Date: Tue Sep 11 15:53:36 2012 -0700
24168 Use ft/s for imperial speeds
24170 Bob Brown thinks this unit will be more useful than mph
24172 Signed-off-by: Keith Packard <keithp@keithp.com>
24174 commit 73d05650eae1d3958e02e9ffde2020a2438eccbb
24175 Author: Keith Packard <keithp@keithp.com>
24176 Date: Tue Sep 11 15:30:45 2012 -0700
24178 Add Version 1.1 release notes.
24180 Signed-off-by: Keith Packard <keithp@keithp.com>
24182 commit 7ae3e4cea1cd180ff18b5293a67b4520cc8292be
24183 Author: Keith Packard <keithp@keithp.com>
24184 Date: Tue Sep 11 01:00:05 2012 -0700
24186 altosui: Imperial units for graphs too
24188 Just to be consistent
24190 Signed-off-by: Keith Packard <keithp@keithp.com>
24192 commit 95268d681c9a6652d84db383f55a4fe8a4ac5173
24193 Author: Tom Marble <tmarble@info9.net>
24194 Date: Tue Sep 11 12:54:31 2012 -0500
24196 Reverted package name to 'altosui' from 'AltosUI'
24197 Also added emacs backup regex (*~) to .gitignore
24199 commit 13c64f6fb5764c6a0f3520cf4e48a75d78e163db
24200 Author: Tom Marble <tmarble@info9.net>
24201 Date: Tue Sep 11 12:44:24 2012 -0500
24203 Add appropriate Java build deps as given from autoconf
24205 commit 8e506274a35eccacd2d4523faa08d279a201753f
24206 Merge: 0bc3ed5 1fc97dd
24207 Author: Tom Marble <tmarble@info9.net>
24208 Date: Tue Sep 11 11:39:22 2012 -0500
24210 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
24212 commit 0bc3ed53aa8972c7080d6335f609cd9d0df1c79d
24213 Author: Tom Marble <tmarble@info9.net>
24214 Date: Tue Sep 11 11:37:14 2012 -0500
24216 Use explicit build deps for altosui (avoids * wildcarding)
24218 commit 1fc97dd9875a7639533a34438c4c7c999412eb3a
24219 Merge: 8397d2b 4420d4a
24220 Author: Bdale Garbee <bdale@gag.com>
24221 Date: Tue Sep 11 10:35:04 2012 -0600
24223 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
24225 commit 8397d2b041824ddf1cc0b82926f10da8aae3264f
24226 Author: Bdale Garbee <bdale@gag.com>
24227 Date: Tue Sep 11 10:34:00 2012 -0600
24229 update Debian build-deps in preparation for 1.1 release
24231 commit 4420d4a9fc011ed970af506ef771dfb81580b666
24232 Author: Keith Packard <keithp@keithp.com>
24233 Date: Tue Sep 11 00:49:48 2012 -0700
24235 Fix Latin-1 encoded copyright symbols in AltosDroid java code
24237 Otherwise, we get complaints when compiling these files.
24239 Signed-off-by: Keith Packard <keithp@keithp.com>
24241 commit 708e7937cba52982b91244cf89bfbff46d346135
24242 Author: Tom Marble <tmarble@info9.net>
24243 Date: Mon Sep 10 16:54:27 2012 -0500
24245 Changed package name from altosui to AltosUI
24247 commit c2ebebc4967043b16380b8ec8800862993005358
24248 Author: Tom Marble <tmarble@info9.net>
24249 Date: Mon Sep 10 14:50:37 2012 -0500
24251 Test commit (comment) to confirm push works
24253 commit 67da878f740a387d0092631ad672e024d26e4192
24254 Author: Keith Packard <keithp@keithp.com>
24255 Date: Mon Sep 10 09:16:04 2012 -0700
24257 altosui: Use units conversion functions everywhere.
24259 Provide a configuration option to select imperial units and use them everywhere
24261 Signed-off-by: Keith Packard <keithp@keithp.com>
24263 commit 66a1e07efcac9324d33a1eca0dfb58a2724b667a
24264 Author: Keith Packard <keithp@keithp.com>
24265 Date: Mon Sep 10 09:14:03 2012 -0700
24267 altoslib: Add imperial units conversion support
24269 "Redneck" mode support
24271 Signed-off-by: Keith Packard <keithp@keithp.com>
24273 commit 51836cedce41d8b36eac34c69370489162aaa2b5
24274 Author: Keith Packard <keithp@keithp.com>
24275 Date: Sun Sep 9 14:02:57 2012 -0700
24277 Bump version to 1.0.9.7
24279 Signed-off-by: Keith Packard <keithp@keithp.com>
24281 commit e45c47c52f9cc9c43b81148e0e58fdedb3af1eb8
24282 Author: Keith Packard <keithp@keithp.com>
24283 Date: Sun Sep 9 14:01:21 2012 -0700
24285 altos/telelco: Search for available firing nodes at boot time
24287 Query for available firing nodes, limiting device selections to those found.
24289 Signed-off-by: Keith Packard <keithp@keithp.com>
24291 commit 77775711d414227b3ed97859d1b21ab1c689a724
24292 Author: Keith Packard <keithp@keithp.com>
24293 Date: Sun Sep 9 13:58:29 2012 -0700
24295 altos/telefire: Add steady warble when the LCO arm switch is on
24297 And make debugging a run-time option too.
24299 Signed-off-by: Keith Packard <keithp@keithp.com>
24301 commit f2933103be122414a9b1795b37003b7a2aa9f3d7
24302 Author: Keith Packard <keithp@keithp.com>
24303 Date: Sun Sep 9 13:57:16 2012 -0700
24305 altos/stm: Fix basic time interval to 10ms -- was 10.1ms
24307 Counting from 0 to 100 takes 10.1ms, so count to 99 instead.
24309 Signed-off-by: Keith Packard <keithp@keithp.com>
24311 commit 0339583996fc57a666f8d3007a0f4b1034039a73
24312 Author: Keith Packard <keithp@keithp.com>
24313 Date: Sun Sep 9 13:56:35 2012 -0700
24315 altos/spiradio: Label LEDs so that the radio code can use them
24317 Mark which should be on for TX and which for RX
24319 Signed-off-by: Keith Packard <keithp@keithp.com>
24321 commit 3fa71c497a5bf576974e70af06762f75734e6699
24322 Author: Keith Packard <keithp@keithp.com>
24323 Date: Sun Sep 9 13:50:56 2012 -0700
24325 altos: Try to get remote cmac time closer to reality
24327 Record the time after the packet was sent, but before the return
24328 packet arrives to try and more closely approximate the time the packet
24329 arrived at the other end.
24331 Signed-off-by: Keith Packard <keithp@keithp.com>
24333 commit 27ab744c6eec9243b7aa14161eec2fbf7003531e
24334 Author: Keith Packard <keithp@keithp.com>
24335 Date: Sun Sep 9 13:46:23 2012 -0700
24337 altos: Clean up flight data definitions
24339 These just shuffle the various definitions of data macros around to
24340 make the include files more sensible looking.
24342 Signed-off-by: Keith Packard <keithp@keithp.com>
24344 commit ced6a020d6d94b1c63837a7ab5b0091b7b8ea3c9
24345 Author: Keith Packard <keithp@keithp.com>
24346 Date: Sun Sep 9 13:43:45 2012 -0700
24348 altos: include ao_arch_funcs.h at the very end of ao.h
24350 Move it below the definition of the ms5607 init function
24352 Signed-off-by: Keith Packard <keithp@keithp.com>
24354 commit e053da3e7cb5a4c9ebbffd245cb5d83932183b22
24355 Author: Keith Packard <keithp@keithp.com>
24356 Date: Sun Sep 9 13:11:57 2012 -0700
24358 altos: Allow products without MS5607
24360 The define for a missing MS5607 was wrong, so anything using the fancy
24361 multi-sensor data code would break without an MS5607 in place.
24363 Signed-off-by: Keith Packard <keithp@keithp.com>
24365 commit bb5ab29b6744b382bb2f09486a7a6db7d12a3608
24366 Author: Keith Packard <keithp@keithp.com>
24367 Date: Sun Sep 9 13:10:07 2012 -0700
24369 ao_tools/ao-send-telem: Only start real-time on valid states
24371 Check state to make sure it is < ao_flight_landed to keep invalid
24372 states from switching to real-time playback mode.
24374 Signed-off-by: Keith Packard <keithp@keithp.com>
24376 commit 47d87872c11a63a435fe5b703a4ce33503790d96
24377 Author: Keith Packard <keithp@keithp.com>
24378 Date: Sun Sep 9 13:09:27 2012 -0700
24380 altoslib: Add in a bunch of java files mising after Mike's cleanups
24382 Signed-off-by: Keith Packard <keithp@keithp.com>
24384 commit e2b458a448106ba1ab207f0ea6824b56927d8547
24385 Merge: 9682e9e 3fe9322
24386 Author: Keith Packard <keithp@keithp.com>
24387 Date: Sun Sep 9 13:03:47 2012 -0700
24389 Merge remote-tracking branch 'mjb/altoslib_mjb'
24391 commit 9682e9e6fe730417a77b47795fbe1f06c9a51177
24392 Author: Keith Packard <keithp@keithp.com>
24393 Date: Sun Sep 9 12:29:32 2012 -0700
24395 altosui: Use helper functions to access arrays in AltosLib class
24397 These deal with out-of-range values correctly, instead of causing
24398 exceptions that will just break stuff.
24400 Signed-off-by: Keith Packard <keithp@keithp.com>
24402 commit d65d921b9b2340fa23d3b55b4ae755324d392303
24403 Author: Keith Packard <keithp@keithp.com>
24404 Date: Sun Sep 9 12:20:08 2012 -0700
24406 altosui: Catch errors in state value when saving flight logs
24408 Use AltosLib.state_name() instead of directly accessing the
24409 state_to_string array so that any invalid state values are caught and
24410 replaced with 'invalid' instead of raising an exception.
24412 Signed-off-by: Keith Packard <keithp@keithp.com>
24414 commit 3fe932206f40f4d6f83a4ef49e064109a7a3de92
24415 Author: Mike Beattie <mike@ethernal.org>
24416 Date: Fri Sep 7 18:19:43 2012 +1200
24418 altoslib: move distinct classes to separate files.
24420 Signed-off-by: Mike Beattie <mike@ethernal.org>
24422 commit da053875c12b25b627e83430c3a956a994b435d5
24423 Author: Mike Beattie <mike@ethernal.org>
24424 Date: Fri Sep 7 18:19:07 2012 +1200
24426 altoslib: remove obsolete class
24428 Signed-off-by: Mike Beattie <mike@ethernal.org>
24430 commit 218c73b5bd5bd5673dc6f259f62b39541c52d6ff
24431 Author: Mike Beattie <mike@ethernal.org>
24432 Date: Fri Sep 7 18:11:13 2012 +1200
24434 altoslib: move distinct classes to separate files
24436 Signed-off-by: Mike Beattie <mike@ethernal.org>
24438 commit 42170d0e3a3b68a9d3db69714e043f7273a714fb
24439 Author: Mike Beattie <mike@ethernal.org>
24440 Date: Fri Sep 7 18:10:21 2012 +1200
24442 altoslib: remove duplicate AltosGPSQuery class
24444 Signed-off-by: Mike Beattie <mike@ethernal.org>
24446 commit 82f798e7b1343a56203af2e89790f6de9ab9f98d
24447 Author: Mike Beattie <mike@ethernal.org>
24448 Date: Fri Sep 7 18:09:37 2012 +1200
24450 altoslib: remove duplicate AltosIdleMonitor class
24452 Signed-off-by: Mike Beattie <mike@ethernal.org>
24454 commit 88667f7b7dff52eaf5e30f8f83fed0d7f767268d
24455 Author: Mike Beattie <mike@ethernal.org>
24456 Date: Fri Sep 7 18:07:45 2012 +1200
24458 altoslib: rename AltosIdleRecordTM.java to AltosGPSQuery.java
24460 Signed-off-by: Mike Beattie <mike@ethernal.org>
24462 commit bbbe1846346b4ba61330f535a12b7a5029877ee6
24463 Author: Mike Beattie <mike@ethernal.org>
24464 Date: Fri Sep 7 17:53:20 2012 +1200
24466 altoslib: remove dead code
24468 (if object creation fails, an exception will be thrown - not return null)
24470 Signed-off-by: Mike Beattie <mike@ethernal.org>
24472 commit 02d31db3d3255568cc348a41aa37a461d63ffde2
24473 Author: Mike Beattie <mike@ethernal.org>
24474 Date: Fri Sep 7 17:52:27 2012 +1200
24476 altoslib: resolve argument/variable ambiguity
24478 (and comment out set_flags() which had no corresponding variable anyway)
24480 Signed-off-by: Mike Beattie <mike@ethernal.org>
24482 commit 639f3e5e5171769429eac9e2f17a7b315fd62135
24483 Author: Mike Beattie <mike@ethernal.org>
24484 Date: Fri Sep 7 17:39:25 2012 +1200
24486 altoslib: comment out unused methods
24488 Signed-off-by: Mike Beattie <mike@ethernal.org>
24490 commit 369c5e23ac6d65bab4b456ed86737576ac61102f
24491 Author: Mike Beattie <mike@ethernal.org>
24492 Date: Fri Sep 7 17:35:29 2012 +1200
24494 altoslib: access static variables via class, not instance
24496 Signed-off-by: Mike Beattie <mike@ethernal.org>
24498 commit b02c17b26e028a6f3a46781211a86a18272da4d0
24499 Author: Mike Beattie <mike@ethernal.org>
24500 Date: Fri Sep 7 17:34:17 2012 +1200
24502 altoslib: comment out un-used variables
24504 Signed-off-by: Mike Beattie <mike@ethernal.org>
24506 commit 20bc23ddb90f8a6da1f7ea70f02cf3a038059d32
24507 Author: Mike Beattie <mike@ethernal.org>
24508 Date: Fri Sep 7 17:32:07 2012 +1200
24510 altoslib: Remove un-needed imports
24512 Signed-off-by: Mike Beattie <mike@ethernal.org>
24514 commit c5e98d2b226824f2012e5710ac4b1596b9f0bfb1
24515 Author: Keith Packard <keithp@keithp.com>
24516 Date: Thu Sep 6 18:07:33 2012 -0700
24518 altos: Fix radio slave to run lights in the normal way
24520 These were left in a debug mode, toggling instead of flashing.
24522 Signed-off-by: Keith Packard <keithp@keithp.com>
24524 commit 01820c3e95fe85d2bee648d41809f1a753f81020
24525 Author: Keith Packard <keithp@keithp.com>
24526 Date: Sat Sep 1 00:15:16 2012 -0500
24528 Revert "first work on PWM input to TeleScience, 'p' command displays timer 1"
24530 PWM bits not suitable for master
24532 This reverts commit e93c6bcc799d76d4ff425815e2601a25e6796229.
24534 commit 3ccc4a13e3f76bec864d61b0cdfd57c76c6baadb
24535 Author: Keith Packard <keithp@keithp.com>
24536 Date: Sat Sep 1 00:15:02 2012 -0500
24538 Revert "Timer 3 working with slower clock and all 16 bits."
24540 PWM bits not suitable for master
24542 This reverts commit 49b1ff4c614d24977b33cd17b583acc87acff476.
24544 commit 8c743857525eff778d067068356dec486b9fefa2
24545 Author: Keith Packard <keithp@keithp.com>
24546 Date: Sat Sep 1 00:14:49 2012 -0500
24548 Revert "ICP3 working"
24550 PWM bits not suitable for master
24552 This reverts commit 75d6aa6f798606f1a6c5a46542065dda81e63b2a.
24554 commit 294b1ec85a37e375a0ac70cbffc6398309d63a7f
24555 Author: Keith Packard <keithp@keithp.com>
24556 Date: Sat Sep 1 00:14:27 2012 -0500
24558 Revert "telescience: correctly calculating rate values with higher resolution"
24560 PWM bits not suitable for master
24562 This reverts commit ada6f2dfc045e77cb9499f20cdec1b4a54ef0db1.
24564 commit ec9e1186dce079a2f2b7be8050216ddb1bc1af66
24565 Merge: 503eabd 6d31f8d
24566 Author: Keith Packard <keithp@keithp.com>
24567 Date: Fri Aug 31 22:24:16 2012 -0500
24569 Merge remote-tracking branch 'mjb/freq_menu'
24571 commit 503eabd0e351ecdffda1416b7d00f8ef1d6913c9
24572 Author: Keith Packard <keithp@keithp.com>
24573 Date: Fri Aug 31 22:19:40 2012 -0500
24575 altos: Get mma655x driver limping along
24577 This appears to drive the chip correctly to see values from the accelerometer.
24579 Signed-off-by: Keith Packard <keithp@keithp.com>
24581 commit 48a3e6e073e927e456ef4e456e512f6fb8e3b9ee
24582 Author: Keith Packard <keithp@keithp.com>
24583 Date: Fri Aug 31 21:02:13 2012 -0500
24585 altos: Fix mma665x pin assigment for mma655x
24587 It's on PE13-PE15, not PA5-PA7
24589 Signed-off-by: Keith Packard <keithp@keithp.com>
24591 commit f9af7819de086d9179c3a4d1df7c88ab67a7d7c7
24592 Author: Keith Packard <keithp@keithp.com>
24593 Date: Fri Aug 31 21:01:21 2012 -0500
24595 altos: Add custom panic noise for self-test failures
24597 Make it easier to tell which component is failing self test
24599 Signed-off-by: Keith Packard <keithp@keithp.com>
24601 commit 6d31f8d15ef4bf75ae039dd7b1a6a615d00eb215
24602 Author: Mike Beattie <mike@ethernal.org>
24603 Date: Fri Aug 31 17:53:53 2012 +1200
24605 altoslib: add missing manufacturer parsing for AltosConfigData
24607 Signed-off-by: Mike Beattie <mike@ethernal.org>
24609 commit 4e3ac2b624f68dd5a8f6dd7a33eb10cd78497964
24610 Author: Mike Beattie <mike@ethernal.org>
24611 Date: Fri Aug 31 17:42:22 2012 +1200
24613 altosdroid: invert channel/freq ordering
24615 Matches Channel Selector in altosui
24617 Signed-off-by: Mike Beattie <mike@ethernal.org>
24619 commit 80bc985f79e616e5327aed4f7acc9bca71b8db54
24620 Author: Mike Beattie <mike@ethernal.org>
24621 Date: Fri Aug 31 16:50:53 2012 +1200
24623 altosdroid: also display channel numbers
24625 Signed-off-by: Mike Beattie <mike@ethernal.org>
24627 commit b6a21856c68ca8cca93eb755285be1927acb91e7
24628 Author: Mike Beattie <mike@ethernal.org>
24629 Date: Fri Aug 31 16:39:10 2012 +1200
24631 ao-send-telem: fix frequency set command
24633 Signed-off-by: Mike Beattie <mike@ethernal.org>
24635 commit 543ecb530d6fdf188a746ac59b72544e69bad830
24636 Author: Mike Beattie <mike@ethernal.org>
24637 Date: Fri Aug 31 16:38:21 2012 +1200
24639 altosdroid: complete frequency change dialog
24641 Also implement Service IPC to action request.
24643 Signed-off-by: Mike Beattie <mike@ethernal.org>
24645 commit f1a9fff865e0b226a97ad5d6eaaac64bd5e5d410
24646 Author: Keith Packard <keithp@keithp.com>
24647 Date: Thu Aug 30 23:07:43 2012 -0500
24649 altosdroid: Start a hacked-up frequency dialog
24651 Signed-off-by: Keith Packard <keithp@keithp.com>
24653 commit 6d8858ca1899c8b64f107ebb45711efbb7b8d62a
24654 Author: Keith Packard <keithp@keithp.com>
24655 Date: Thu Aug 30 16:30:04 2012 -0500
24657 altos: another .gitignore file
24659 Signed-off-by: Keith Packard <keithp@keithp.com>
24661 commit ab9d5bf13e6f1735a0463f4bcab13d65170b7015
24662 Author: Keith Packard <keithp@keithp.com>
24663 Date: Thu Aug 30 16:28:53 2012 -0500
24665 altos: ao_cc_spi.h isn't necessary for telelco
24667 The SPI radio defines are in ao_radio_spi.h
24669 Signed-off-by: Keith Packard <keithp@keithp.com>
24671 commit b635cb26ba54c8f5c6a958e0ab0bc4d34d33b635
24672 Merge: 354c1fe a8ecf3a
24673 Author: Keith Packard <keithp@keithp.com>
24674 Date: Thu Aug 30 16:24:38 2012 -0500
24676 Merge remote-tracking branch 'mjb/master'
24678 commit 354c1fed7f06c2c45c661e7265c2ac4bc47e2750
24679 Author: Keith Packard <keithp@keithp.com>
24680 Date: Thu Aug 30 16:22:51 2012 -0500
24682 altos: Add a bunch of .gitignore entries
24684 Clean up the git status output
24686 Signed-off-by: Keith Packard <keithp@keithp.com>
24688 commit 2c59954fdf204f443d9bb28c4a66a30f925ef348
24689 Author: Keith Packard <keithp@keithp.com>
24690 Date: Thu Aug 30 16:16:52 2012 -0500
24692 altos: Shuffle LCO functions around, add telelco first cut
24694 Pull LCO functions shared between LCO UI and command line into
24697 Import bits for telelco.
24699 Signed-off-by: Keith Packard <keithp@keithp.com>
24701 commit 72d44d14aefcb754b871835aec8d265771357212
24702 Author: Keith Packard <keithp@keithp.com>
24703 Date: Thu Aug 30 16:14:57 2012 -0500
24705 altos: Disable debug printfs and fix pad ignite time for telefire
24707 Signed-off-by: Keith Packard <keithp@keithp.com>
24709 commit a8ecf3aa4e88d4c76643fb541fb1d5535a454aba
24710 Author: Mike Beattie <mike@ethernal.org>
24711 Date: Thu Aug 30 21:08:41 2012 +1200
24713 altosdroid: Implement voice just like altosui
24715 Signed-off-by: Mike Beattie <mike@ethernal.org>
24717 commit 2e6af70c87e7cc62a92b09bbbde745a31d83b5eb
24718 Author: Mike Beattie <mike@ethernal.org>
24719 Date: Thu Aug 30 21:08:06 2012 +1200
24721 altosdroid: Move bluetooth check to first task
24723 Signed-off-by: Mike Beattie <mike@ethernal.org>
24725 commit 519887571cee2840024c5c8f4b7f0e5c352d3323
24726 Author: Mike Beattie <mike@ethernal.org>
24727 Date: Thu Aug 30 13:23:29 2012 +1200
24729 altosdroid: add rssi/serial/flight, and re-work UI ordering
24731 Signed-off-by: Mike Beattie <mike@ethernal.org>
24733 commit 14022b002d2201fb3ca28292d976c90e2d9a15a2
24734 Author: Mike Beattie <mike@ethernal.org>
24735 Date: Thu Aug 30 13:23:04 2012 +1200
24737 altosdroid: rename ambiguous TextView name
24739 Signed-off-by: Mike Beattie <mike@ethernal.org>
24741 commit 91606c89828e60d8cf9a5ea4ff75b951d6fc042a
24742 Author: Mike Beattie <mike@ethernal.org>
24743 Date: Thu Aug 30 13:21:38 2012 +1200
24745 altosdroid: formatting/whitespace, correct ids
24747 Signed-off-by: Mike Beattie <mike@ethernal.org>
24749 commit 2137a112b4217d84041f749b8aa5eb8f4d330ba0
24750 Author: Mike Beattie <mike@ethernal.org>
24751 Date: Thu Aug 30 13:20:10 2012 +1200
24753 altosdroid: rework lat/lon to more common format
24755 Signed-off-by: Mike Beattie <mike@ethernal.org>
24757 commit c32325af6605e78c1d1147d466f3ea12ce94124a
24758 Author: Mike Beattie <mike@ethernal.org>
24759 Date: Thu Aug 30 13:19:41 2012 +1200
24761 altosdroid: rename azimuth/altitude to elevation/height respectively.
24763 (Matches altoslib, altosui, altos)
24765 Signed-off-by: Mike Beattie <mike@ethernal.org>
24767 commit 8ffa4f9a474026f5a6523b26919a78565e0ed74c
24768 Author: Mike Beattie <mike@ethernal.org>
24769 Date: Thu Aug 30 13:13:20 2012 +1200
24771 altosdroid: move units into code, to match altosui
24773 Signed-off-by: Mike Beattie <mike@ethernal.org>
24775 commit 583458772746317b98fced907ec780edff465888
24776 Merge: aea10c1 17b6ffb
24777 Author: Keith Packard <keithp@keithp.com>
24778 Date: Wed Aug 29 11:29:24 2012 -0700
24780 Merge remote-tracking branch 'mjb/master'
24782 Pull in Mike's fancy new AltosDroid bits
24784 commit aea10c107dff2643677a9c8d1fc41e14f4a66049
24785 Author: Keith Packard <keithp@keithp.com>
24786 Date: Wed Aug 29 11:25:36 2012 -0700
24788 altos: spiradio debug serial is port 1, not port 0
24790 The SPI link uses port 0; it seems like the having the two try to
24791 share the same wires is a bad plan.
24793 Signed-off-by: Keith Packard <keithp@keithp.com>
24795 commit 3e7e8e21f2bb823cb6e74c73d0feddbc3a891107
24796 Author: Keith Packard <keithp@keithp.com>
24797 Date: Wed Aug 29 11:23:13 2012 -0700
24799 altos: SPI radio - use 1->0 for 'done' and 0->1 for 'ready'
24801 This changes how the SPI radio protocol uses the interrupt
24802 line. Instead of a pulse indicating operation done, this now uses a 0
24803 value for done and a 1 value for ready. The key distinction is that
24804 the master can tell when the slave is waiting for the next command
24805 instead of hoping that it got done 'soon enough'.
24807 Signed-off-by: Keith Packard <keithp@keithp.com>
24809 commit 1b6ed262460ee75fb5bb684d13d19c26c7ea750b
24810 Author: Keith Packard <keithp@keithp.com>
24811 Date: Wed Aug 29 11:22:02 2012 -0700
24813 altos: fix ao_pad debug output for query command
24815 Igniter status is an array these days.
24817 Signed-off-by: Keith Packard <keithp@keithp.com>
24819 commit 442f1bfc89528103e2c28f768c954b956e39afc5
24820 Author: Keith Packard <keithp@keithp.com>
24821 Date: Wed Aug 29 11:21:09 2012 -0700
24823 altos: Use updated pad protocol for lco commands
24825 Stop using the older single-channel protocol and switch to the new
24826 multi-channel protocol
24828 Signed-off-by: Keith Packard <keithp@keithp.com>
24830 commit 7f64e62356bcfcd6ba8a88b09251793481bcd56c
24831 Author: Keith Packard <keithp@keithp.com>
24832 Date: Wed Aug 29 11:19:17 2012 -0700
24834 altos: Note changes to configured AES key for SPI radio convenience
24836 Keep a sequence number to mark when the AES key is changed so that the
24837 radio code can avoid sending the key before every CMAC radio operation.
24839 Signed-off-by: Keith Packard <keithp@keithp.com>
24841 commit 1a7d2faf76a46271532102e217c2dd5515e38b72
24842 Author: Keith Packard <keithp@keithp.com>
24843 Date: Wed Aug 29 11:16:42 2012 -0700
24845 altos: Wait for IN dma complete on slave SPI send
24847 SPI send double buffered, so the DMA completes one byte too early. Use
24848 the recv DMA to know when the SPI transfer is complete.
24850 Signed-off-by: Keith Packard <keithp@keithp.com>
24852 commit 17b6ffb6c090112367eac944494f0fa58da453c7
24853 Author: Mike Beattie <mike@ethernal.org>
24854 Date: Thu Aug 30 01:01:06 2012 +1200
24856 altosdroid: initial attempt at a UI.
24858 Signed-off-by: Mike Beattie <mike@ethernal.org>
24860 commit 98f65994ee547feb8cca63ff4ed0fefd3fb2d37d
24861 Author: Keith Packard <keithp@keithp.com>
24862 Date: Tue Aug 28 23:05:02 2012 -0700
24864 altos: Oops. forgot ao_data.c
24866 Signed-off-by: Keith Packard <keithp@keithp.com>
24868 commit 3a3982ceb721910c6a4f75badebb62baa6c6568e
24869 Author: Keith Packard <keithp@keithp.com>
24870 Date: Tue Aug 28 22:43:10 2012 -0700
24872 altos: Add spiradio Makefile
24874 git add doesn't add Makefile by default.
24876 Signed-off-by: Keith Packard <keithp@keithp.com>
24878 commit fc9841ee5e92318471b6bec09b7075a788ab8872
24879 Author: Keith Packard <keithp@keithp.com>
24880 Date: Tue Aug 28 18:13:02 2012 -0700
24882 altos: Mostly working SPI radio link
24884 This includes long delays to avoid overrunning the cc1111 input,
24885 otherwise it works pretty well. The delays mean that we can't capture
24886 the reply to a cmac command though, so more work is needed.
24888 Signed-off-by: Keith Packard <keithp@keithp.com>
24890 commit 27a879b4069ccedf8bbe39d7dbecf45000f29d8c
24891 Author: Keith Packard <keithp@keithp.com>
24892 Date: Tue Aug 28 18:12:27 2012 -0700
24894 altos: Include the radio_cmac debug commands in telefire
24896 Just temporary debugging
24898 Signed-off-by: Keith Packard <keithp@keithp.com>
24900 commit eb1a9a8c3f3d3993d5986925bc4ad112c2bbc119
24901 Author: Keith Packard <keithp@keithp.com>
24902 Date: Tue Aug 28 18:10:34 2012 -0700
24904 altos: Explicitly erase memory in STM eeprom driver.
24906 This seems to make the STM32L152 happier
24908 Signed-off-by: Keith Packard <keithp@keithp.com>
24910 commit 3fe5a70d9ac2114ee554813b1dbb3019a3e4aff7
24911 Author: Keith Packard <keithp@keithp.com>
24912 Date: Tue Aug 28 18:08:59 2012 -0700
24914 altos: Track protocol changes to ao_pad debug messages
24916 Make the debug output build again.
24918 Signed-off-by: Keith Packard <keithp@keithp.com>
24920 commit 18b5021e99c1eef32d2d85f619c84e89cecae7a7
24921 Author: Keith Packard <keithp@keithp.com>
24922 Date: Tue Aug 28 18:07:55 2012 -0700
24924 altos: Stop providing debug commands in seven-segment driver
24926 The radio_cmac debug commands use the same letter, and this code works now...
24928 Signed-off-by: Keith Packard <keithp@keithp.com>
24930 commit 78cd26eec77adda23ef1b5ca2d91027f1e059868
24931 Author: Keith Packard <keithp@keithp.com>
24932 Date: Tue Aug 28 18:07:05 2012 -0700
24934 altos: Move radio_cmac test funcs from ao_lco_cmd.c to new file
24936 These are useful in the firing node for testing as well, so move them
24939 Signed-off-by: Keith Packard <keithp@keithp.com>
24941 commit f2d919a2147025daa332957cda6d91959e4731ab
24942 Author: Keith Packard <keithp@keithp.com>
24943 Date: Tue Aug 28 18:05:10 2012 -0700
24945 altos: When sharing radio DMA for AES, use it for in instead of out
24947 We look at the out_done value, but not the in_done value; if we use
24948 the radio DMA for out, we would have to use ao_radio_dma_done to check
24949 for completion. This way, we can ignore that value and use the
24950 existing ao_aes_dma_out_done value.
24952 Signed-off-by: Keith Packard <keithp@keithp.com>
24954 commit 31b42b99edbb976534ac432c07e218f13d1f5f9b
24955 Author: Keith Packard <keithp@keithp.com>
24956 Date: Tue Aug 28 18:03:52 2012 -0700
24958 altos: Fix ao_delay function and move from per-chip code to ao_task.c
24960 ao_delay hasn't been chip-specific for a long time, and it had a bug
24961 in not calling ao_clear_alarm.
24963 Signed-off-by: Keith Packard <keithp@keithp.com>
24965 commit ac5d053e6d766d243b7a425ae19779810c350125
24966 Author: Keith Packard <keithp@keithp.com>
24967 Date: Tue Aug 28 18:02:25 2012 -0700
24969 ao-stmload: Always round up load amount to 4 byte boundary
24971 The flashing code doesn't deal with partial writes.
24973 Signed-off-by: Keith Packard <keithp@keithp.com>
24975 commit 68df2b1173e82d48f7857ad2e9325e6a9cbbedfd
24976 Author: Keith Packard <keithp@keithp.com>
24977 Date: Mon Aug 27 22:45:47 2012 -0700
24979 altos: Enable STM SYSCFG when routing EXTI
24981 The EXTI routing information is in the syscfg unit, so that needs to
24982 be powered up or writes to its registers will be lost.
24984 Signed-off-by: Keith Packard <keithp@keithp.com>
24986 commit c677f26852b70bcbb303382c306ce06664fde028
24987 Author: Keith Packard <keithp@keithp.com>
24988 Date: Mon Aug 27 22:45:20 2012 -0700
24990 altos: No need to initialize EXTI priorities at startup time
24992 They all get set to the correct value when enabled.
24994 Signed-off-by: Keith Packard <keithp@keithp.com>
24996 commit 5ed88fb72c3e3ecf3333c700d838667db71cfbdc
24997 Merge: adbe64c 621d093
24998 Author: Bdale Garbee <bdale@gag.com>
24999 Date: Tue Aug 28 23:39:53 2012 -0600
25001 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
25006 commit adbe64c5a9402b7c5075a444a12629131b663877
25007 Author: Bdale Garbee <bdale@gag.com>
25008 Date: Tue Aug 28 23:37:00 2012 -0600
25010 libelf-dev added to build deps
25012 commit cb8f01745c9e8f258f96358b46e1caf17d6b0c9f
25013 Author: Mike Beattie <mike@ethernal.org>
25014 Date: Tue Aug 28 23:20:04 2012 +1200
25016 altosdroid: update Makefile.am for source file changes.
25018 Signed-off-by: Mike Beattie <mike@ethernal.org>
25020 commit c220369953d351f49a5f45bfb5e317859d3a9843
25021 Author: Mike Beattie <mike@ethernal.org>
25022 Date: Tue Aug 28 22:26:12 2012 +1200
25024 altosdroid: Add Dumper class for testing
25026 Signed-off-by: Mike Beattie <mike@ethernal.org>
25028 commit 6c985c2b0433a08add3bbf55fdb30102157b4ede
25029 Author: Mike Beattie <mike@ethernal.org>
25030 Date: Tue Aug 28 22:10:26 2012 +1200
25032 altosdroid: add timer to stop service
25034 * Stops when no UI clients, and no bluetooth connection remains
25036 Signed-off-by: Mike Beattie <mike@ethernal.org>
25038 commit 781bdb6c15b7dd3cc2280b08a2f47ce0f92cf53f
25039 Author: Mike Beattie <mike@ethernal.org>
25040 Date: Tue Aug 28 22:09:34 2012 +1200
25042 altosdroid: do service start/bind/unbind in start/stop, not create/destroy.
25044 Signed-off-by: Mike Beattie <mike@ethernal.org>
25046 commit ea5fe9e95a888d623329d17d048ee360ea114ad1
25047 Author: Mike Beattie <mike@ethernal.org>
25048 Date: Tue Aug 28 22:08:49 2012 +1200
25050 altosdroid: move methods around
25052 Signed-off-by: Mike Beattie <mike@ethernal.org>
25054 commit c6d667a6ac0decfde5bc8a180b14774e9942dd0c
25055 Author: Mike Beattie <mike@ethernal.org>
25056 Date: Tue Aug 28 22:08:19 2012 +1200
25058 altosdroid: tidy up old messages
25060 Signed-off-by: Mike Beattie <mike@ethernal.org>
25062 commit 5c7370dcd7a65c81a3c903a71167e07cfcbade53
25063 Author: Mike Beattie <mike@ethernal.org>
25064 Date: Tue Aug 28 22:07:39 2012 +1200
25066 altosdroid: stop sending device name, just send config data
25068 * Kinda complicated, but ultimately more sensible
25069 * Just send the config data as an arg to MSG_CONNECTED
25070 * keep retrying connection till we actually get config data
25072 Signed-off-by: Mike Beattie <mike@ethernal.org>
25074 commit 5ce8c63850dbc6462d7c41ce917e0e06672ec0ab
25075 Author: Mike Beattie <mike@ethernal.org>
25076 Date: Tue Aug 28 22:00:14 2012 +1200
25078 altosdroid: whitespace
25080 Signed-off-by: Mike Beattie <mike@ethernal.org>
25082 commit df7b74909c3794b7b2397275e7fce9226cb99489
25083 Author: Mike Beattie <mike@ethernal.org>
25084 Date: Tue Aug 28 21:59:40 2012 +1200
25086 altosdroid: override add_reply() to add android based debugging
25088 Signed-off-by: Mike Beattie <mike@ethernal.org>
25090 commit 9d0f187f06c411f0d82e13ee4f2faea789ed9e79
25091 Author: Mike Beattie <mike@ethernal.org>
25092 Date: Tue Aug 28 21:59:15 2012 +1200
25094 altosdroid: more logical name for connection_lost() method.
25096 Signed-off-by: Mike Beattie <mike@ethernal.org>
25098 commit 7664ecc0003151d3f05537f17914df2bf48e4275
25099 Author: Mike Beattie <mike@ethernal.org>
25100 Date: Tue Aug 28 21:58:47 2012 +1200
25102 altosdroid: rework ConnectThread
25104 * Start input_thread after connection, otherwise it's painful to kill
25105 on connect failure.
25107 Signed-off-by: Mike Beattie <mike@ethernal.org>
25109 commit 502b24eb2c9c76e4e2bdcc79be0b71a869488b37
25110 Author: Mike Beattie <mike@ethernal.org>
25111 Date: Tue Aug 28 21:55:40 2012 +1200
25113 altosdroid: fix a connection retry having a null pointer
25115 Signed-off-by: Mike Beattie <mike@ethernal.org>
25117 commit c7bef83fd553987f83c0bf7ff37ef941872564fe
25118 Author: Mike Beattie <mike@ethernal.org>
25119 Date: Tue Aug 28 21:54:05 2012 +1200
25121 altosdroid: fix double call of stopAltosBluetooth()
25123 Signed-off-by: Mike Beattie <mike@ethernal.org>
25125 commit 150a726e125aa7d181c00348ddd1791fd84164e5
25126 Author: Mike Beattie <mike@ethernal.org>
25127 Date: Tue Aug 28 21:53:01 2012 +1200
25129 altosdroid: Miscellaneous comments/debug/etc cleanup
25131 Signed-off-by: Mike Beattie <mike@ethernal.org>
25133 commit 162c640d382b9f823573578fe97584adc94cd9b6
25134 Author: Mike Beattie <mike@ethernal.org>
25135 Date: Tue Aug 28 17:37:45 2012 +1200
25137 altosdroid: miscellaneous cleanup
25144 Signed-off-by: Mike Beattie <mike@ethernal.org>
25146 commit ae03d8e87985b9f746e9e22b2394a0a5b4f39f1c
25147 Author: Mike Beattie <mike@ethernal.org>
25148 Date: Tue Aug 28 17:36:41 2012 +1200
25150 altosdroid: Add passing of Device Config at connect
25152 Signed-off-by: Mike Beattie <mike@ethernal.org>
25154 commit 03563c765d8b0ab3689c91b2b533c68e11650577
25155 Author: Mike Beattie <mike@ethernal.org>
25156 Date: Tue Aug 28 17:35:11 2012 +1200
25158 altosdroid: Add new "TelemetryReader" class to handle Telemetry
25160 * Add MSG_TELEMETRY messages to both AltosDroid and TelemetryService
25161 to handle passing of AltosState object all the way back to the UI.
25162 * Remove linkedblockinglist from TelemetryService
25163 * (MSG_TELEMETRY is a rename of MSG_INCOMING_TELEM in AltosDroid)
25164 * commented code in case statement inside AltosDroind - won't work with
25165 the objects it is currently passed.
25166 * Add new "MSG_DEVCONFIG" message to AltosDroid - allows TelemetryService
25167 to pass information about the connected device back to the UI.
25169 Signed-off-by: Mike Beattie <mike@ethernal.org>
25171 commit ed653a1e6dc8884cb171af1406fd0999ef125a4d
25172 Author: Mike Beattie <mike@ethernal.org>
25173 Date: Tue Aug 28 17:26:09 2012 +1200
25175 altosdroid: create connected() method
25177 Signed-off-by: Mike Beattie <mike@ethernal.org>
25179 commit 621d0930244f25165d2ac5da596dcc87e253b965
25180 Author: Keith Packard <keithp@keithp.com>
25181 Date: Mon Aug 27 13:52:11 2012 -0700
25183 altos: Add spiradio product
25185 Implements the SPI radio protocol
25187 Signed-off-by: Keith Packard <keithp@keithp.com>
25189 commit 61d094f281431e9f11f806454981da8e1245fb5c
25190 Author: Keith Packard <keithp@keithp.com>
25191 Date: Mon Aug 27 13:51:53 2012 -0700
25193 altos: sdcdb rc file for telefire
25195 Signed-off-by: Keith Packard <keithp@keithp.com>
25197 commit c31d07fb35a5b4d283facf649bed3f0f9802d1fc
25198 Author: Keith Packard <keithp@keithp.com>
25199 Date: Mon Aug 27 13:49:07 2012 -0700
25201 altos: Add SPI linked radio API
25203 Forward the necessary radio functions over the SPI link
25205 Signed-off-by: Keith Packard <keithp@keithp.com>
25207 commit 0f3483f93137f41a61f3fcbe06afcaffb1b9e17b
25208 Author: Keith Packard <keithp@keithp.com>
25209 Date: Mon Aug 27 13:47:16 2012 -0700
25211 altos: Clean up radio APIs
25213 Move api to ao_radio_cmac.h include file.
25214 Expose ao_radio_test as standard API.
25216 Signed-off-by: Keith Packard <keithp@keithp.com>
25218 commit 85fd7ab504a9fac1de90bbe7df8ea477a092c2b0
25219 Author: Keith Packard <keithp@keithp.com>
25220 Date: Mon Aug 27 13:45:56 2012 -0700
25222 altos: Build telelco and spiradio when possible
25224 Signed-off-by: Keith Packard <keithp@keithp.com>
25226 commit 467acda662de8b96e7d0df729c2e4761686b82a1
25227 Author: Keith Packard <keithp@keithp.com>
25228 Date: Mon Aug 27 13:44:35 2012 -0700
25230 altos: Expose a signed version of the tick count
25232 Useful when doing time comparisons.
25234 Signed-off-by: Keith Packard <keithp@keithp.com>
25236 commit e7443bf350afe273e87a884915ea1e7662630cd3
25237 Author: Keith Packard <keithp@keithp.com>
25238 Date: Mon Aug 27 13:42:38 2012 -0700
25240 altos: Specify the LCD duty cycle for stm-demo
25242 This is the demo for the large 7-segment displays and needs static drive
25244 Signed-off-by: Keith Packard <keithp@keithp.com>
25246 commit 708d49e498bbdc59bb5af9bf4ca5fcea5689547a
25247 Author: Keith Packard <keithp@keithp.com>
25248 Date: Mon Aug 27 13:41:13 2012 -0700
25250 altos: Test multiple quadrature devices. Export quadrature count.
25252 Signed-off-by: Keith Packard <keithp@keithp.com>
25254 commit 8bfe8157cd9fe488d1ee961f200ffa0866322f2c
25255 Author: Keith Packard <keithp@keithp.com>
25256 Date: Mon Aug 27 13:38:44 2012 -0700
25258 altos: Seven segment display driver
25260 Hex numbers and the decimal point.
25262 Signed-off-by: Keith Packard <keithp@keithp.com>
25264 commit 28c3923b6180e24a77aecc7162bb2852cec7d770
25265 Author: Keith Packard <keithp@keithp.com>
25266 Date: Mon Aug 27 13:37:14 2012 -0700
25268 altos: More SPI slave changes for cc1111 driver
25270 Don't enable DMA in the other direction when doing slave transfers.
25272 Signed-off-by: Keith Packard <keithp@keithp.com>
25274 commit a27b9b5c36cf748e415ba210c8d8ae72d8227a98
25275 Author: Keith Packard <keithp@keithp.com>
25276 Date: Mon Aug 27 13:35:39 2012 -0700
25278 altos: Add SPI slave get/put macros to cc1111
25280 Theese don't try to drive the chip select line
25282 Signed-off-by: Keith Packard <keithp@keithp.com>
25284 commit 304909b7534768bfc8da62954effb37ba86806ea
25285 Author: Keith Packard <keithp@keithp.com>
25286 Date: Mon Aug 27 13:34:12 2012 -0700
25288 altos: Provide interface for STM LCD driver.
25290 This provides a simple function interface for driving the LCD segments
25291 in the STM chip. It also uses the update complete interrupt to block
25292 LCD users during flush.
25294 Signed-off-by: Keith Packard <keithp@keithp.com>
25296 commit c1168f40223ca09df23215f2e2fc445a8a03aea9
25297 Author: Keith Packard <keithp@keithp.com>
25298 Date: Mon Aug 27 13:32:41 2012 -0700
25300 altos: Rename drivers/ao_lco to drivers/ao_lco_cmd
25302 These contain command line functions for testing the cmac and lco
25303 features. Now that there's a telelco-specific ao_lco interface file,
25304 it's useful to have both for testing.
25306 Signed-off-by: Keith Packard <keithp@keithp.com>
25308 commit fa8668931cbbc1506560222f2db7e427b514a351
25309 Author: Mike Beattie <mike@ethernal.org>
25310 Date: Mon Aug 27 19:41:47 2012 +1200
25312 altosdroid: Let a freshly connected client know what the device name is!
25314 Signed-off-by: Mike Beattie <mike@ethernal.org>
25316 commit 9a41508d92f95012a37bb75603e6e48a2c405204
25317 Author: Mike Beattie <mike@ethernal.org>
25318 Date: Mon Aug 27 19:41:29 2012 +1200
25320 altosdroid: Add Connected/Connect_failed messages
25322 Signed-off-by: Mike Beattie <mike@ethernal.org>
25324 commit e121ec3ae634f41979717281a28af5e4a38e8f3a
25325 Author: Mike Beattie <mike@ethernal.org>
25326 Date: Mon Aug 27 19:40:30 2012 +1200
25328 altosdroid: don't need keys for Bundles anymore
25330 Signed-off-by: Mike Beattie <mike@ethernal.org>
25332 commit afac4d6c82916eea67ac838cd22806bd73db00a9
25333 Author: Mike Beattie <mike@ethernal.org>
25334 Date: Mon Aug 27 19:39:53 2012 +1200
25336 altosdroid: Toast() requests don't need Bundles
25338 Signed-off-by: Mike Beattie <mike@ethernal.org>
25340 commit 18c380120fe37a4bdc8f295e86c6c4413d1aa037
25341 Author: Mike Beattie <mike@ethernal.org>
25342 Date: Mon Aug 27 19:39:09 2012 +1200
25344 altosdroid: really don't need to store a local copy of the device name
25346 Signed-off-by: Mike Beattie <mike@ethernal.org>
25348 commit 6441437d3b0e848b225a3d6c78ab00e2590c6988
25349 Author: Mike Beattie <mike@ethernal.org>
25350 Date: Mon Aug 27 19:37:16 2012 +1200
25352 altosdroid: remove complexity around message passing
25354 * Don't really need to use bundles
25355 * TelemetryService: Use a local variable to store the bluetooth device object
25357 Signed-off-by: Mike Beattie <mike@ethernal.org>
25359 commit f89e7de20374141b367205aa517a08ee203bfaf3
25360 Author: Keith Packard <keithp@keithp.com>
25361 Date: Sun Aug 26 09:53:16 2012 -0700
25363 altos: Trigger sample complete when all data are ready
25365 This has each sensor mark a bit in the current data record which is
25366 then sent for processing when all of the data are present.
25368 Signed-off-by: Keith Packard <keithp@keithp.com>
25370 commit dec1481786ad54e22634e32109b5ed6e5483938e
25371 Author: Keith Packard <keithp@keithp.com>
25372 Date: Sun Aug 26 09:52:27 2012 -0700
25374 altos: Shrink STM stack size
25376 512 bytes should be enough for anybody.
25378 Signed-off-by: Keith Packard <keithp@keithp.com>
25380 commit d13d0fbfcb0fd6d8a1af46f6270a968d746c830e
25381 Author: Keith Packard <keithp@keithp.com>
25382 Date: Sun Aug 26 09:49:34 2012 -0700
25384 altos: Make ao_cur_task_index track ao_cur_task in ao_yield
25386 This keeps the two main task references (index and pointer) in
25387 agreement during task switching, avoiding an extra assignment at the
25388 end of the task switching loop.
25390 Signed-off-by: Keith Packard <keithp@keithp.com>
25392 commit 1c9baa88d6cd931c66d453674322908eb267ba4c
25393 Author: Keith Packard <keithp@keithp.com>
25394 Date: Sun Aug 26 09:47:05 2012 -0700
25396 altos: Make 'pad' driver useful with telefire v0.1
25398 This reports correct status bits over the radio and to the LEDs for
25399 all four channels, and also makes the firing test command control all
25402 Signed-off-by: Keith Packard <keithp@keithp.com>
25404 commit ea4db73328e865fd658b573da256ca0004c69c61
25405 Author: Keith Packard <keithp@keithp.com>
25406 Date: Sun Aug 26 09:45:03 2012 -0700
25408 altos: Add debug command for 74hc597 driver
25410 This dumps the current state of the 74hc597 chip.
25412 Note that this shows that the 74hc597 driver doesn't work, and that
25413 the circuit used in telefire v0.1 can't work.
25415 Signed-off-by: Keith Packard <keithp@keithp.com>
25417 commit 89f1a685a02c7808cf03853aa9a5ee50c6baf49e
25418 Author: Keith Packard <keithp@keithp.com>
25419 Date: Sun Aug 26 09:43:34 2012 -0700
25421 altos: Allow sharing of radio DMA with aes engine
25423 otherwise, telefire doesn't have enough DMA channels.
25425 Signed-off-by: Keith Packard <keithp@keithp.com>
25427 commit 58d2b70575f3616a056d2356a737b3be15ed3d66
25428 Author: Mike Beattie <mike@ethernal.org>
25429 Date: Sun Aug 26 23:38:33 2012 +1200
25431 altosdroid: begin adding TextToSpeech support.
25433 Signed-off-by: Mike Beattie <mike@ethernal.org>
25435 commit 11896d22b7bc6e34e3f6109d28f8b6a2d37e6c25
25436 Author: Mike Beattie <mike@ethernal.org>
25437 Date: Sun Aug 26 23:38:10 2012 +1200
25439 altosdroid: whitespace cleanup
25441 Signed-off-by: Mike Beattie <mike@ethernal.org>
25443 commit f8211fee3c8a5de6925eadca2679441801ac793e
25444 Author: Mike Beattie <mike@ethernal.org>
25445 Date: Sun Aug 26 23:37:58 2012 +1200
25447 altosdroid: Send device name and connected state back to TelemetryService
25449 Signed-off-by: Mike Beattie <mike@ethernal.org>
25451 commit 8fdde3e74c6dce35f90f4575ce6914516fc56aba
25452 Author: Mike Beattie <mike@ethernal.org>
25453 Date: Sun Aug 26 23:37:33 2012 +1200
25455 altosdroid: re-work connect/thread handling in AltosBluetooth
25457 * Much more resilient to failure
25458 * handles multiple blocked threads better
25460 Signed-off-by: Mike Beattie <mike@ethernal.org>
25462 commit dba71db022ae4a9f7c5fd128b90caa73aa4e99da
25463 Author: Mike Beattie <mike@ethernal.org>
25464 Date: Sun Aug 26 23:34:59 2012 +1200
25466 altosdroid: remove old commented code
25468 Signed-off-by: Mike Beattie <mike@ethernal.org>
25470 commit 38827db5131a2681243649c76bfd1d7d9801f9ba
25471 Author: Mike Beattie <mike@ethernal.org>
25472 Date: Sun Aug 26 23:34:45 2012 +1200
25474 altosdroid: add handling when restarting BT. delay start after stop.
25476 Signed-off-by: Mike Beattie <mike@ethernal.org>
25478 commit 30d107882b62edf4e6d48923209da6ce3dabeef7
25479 Author: Mike Beattie <mike@ethernal.org>
25480 Date: Sun Aug 26 23:34:28 2012 +1200
25482 altosdroid: set devicename and pass on to clients
25484 Signed-off-by: Mike Beattie <mike@ethernal.org>
25486 commit d95b84b56c63002788939b93b6ce949d921a4892
25487 Author: Mike Beattie <mike@ethernal.org>
25488 Date: Sun Aug 26 23:30:45 2012 +1200
25490 altosdroid: Send current state to client on connect
25492 Signed-off-by: Mike Beattie <mike@ethernal.org>
25494 commit cf94a86f37284b53e89b13a7eeb871db647c61ba
25495 Author: Mike Beattie <mike@ethernal.org>
25496 Date: Sun Aug 26 23:30:00 2012 +1200
25498 altosdroid: add missing break; (just in case!)
25500 Signed-off-by: Mike Beattie <mike@ethernal.org>
25502 commit 24fe48f66f94c99b8197a612afe6f98e980e9796
25503 Author: Mike Beattie <mike@ethernal.org>
25504 Date: Sun Aug 26 23:29:25 2012 +1200
25506 altosdroid: debugging statements
25508 Signed-off-by: Mike Beattie <mike@ethernal.org>
25510 commit 2ef1723091b0c491ef445474844376185ca4102b
25511 Author: Mike Beattie <mike@ethernal.org>
25512 Date: Sun Aug 26 23:28:59 2012 +1200
25514 altosdroid: forgot change to IncomingHandler constructor call. oops!
25516 Signed-off-by: Mike Beattie <mike@ethernal.org>
25518 commit d40f96fcc961cfbf6af67fc84591d2660d065ca0
25519 Author: Mike Beattie <mike@ethernal.org>
25520 Date: Sun Aug 26 23:28:26 2012 +1200
25522 altosdroid: Strings and Layout changes
25524 Signed-off-by: Mike Beattie <mike@ethernal.org>
25526 commit 3d6fc5fe462531e05ca4b9be1a421490e067a28b
25527 Author: Mike Beattie <mike@ethernal.org>
25528 Date: Sun Aug 26 23:26:58 2012 +1200
25530 altosdroid: lots of debugging statements
25532 Signed-off-by: Mike Beattie <mike@ethernal.org>
25534 commit 31bffa435cec2098c7ab5c42c829ba6e1578b5d2
25535 Author: Mike Beattie <mike@ethernal.org>
25536 Date: Sun Aug 26 23:24:13 2012 +1200
25538 altosdroid: need sendMessageToClients() for setState().. oops!
25540 Signed-off-by: Mike Beattie <mike@ethernal.org>
25542 commit a9ec3c96288b7ea4e40586321a0a98edf0c8fee5
25543 Author: Mike Beattie <mike@ethernal.org>
25544 Date: Sun Aug 26 23:23:33 2012 +1200
25546 altosdroid: Need access to handler inside AltosBluetooth
25548 * Also move add_monitor() call
25550 Signed-off-by: Mike Beattie <mike@ethernal.org>
25552 commit d7173e814c49826f39bba1ff6b024819c555860c
25553 Author: Mike Beattie <mike@ethernal.org>
25554 Date: Sun Aug 26 23:20:01 2012 +1200
25556 altosdroid: reflect change in message name
25558 Signed-off-by: Mike Beattie <mike@ethernal.org>
25560 commit 215d78f06093bd8a8b08a85cae0f1f34aee2a6ec
25561 Author: Mike Beattie <mike@ethernal.org>
25562 Date: Sun Aug 26 23:19:06 2012 +1200
25564 altosdroid: begin adding state support
25566 Signed-off-by: Mike Beattie <mike@ethernal.org>
25568 commit fe6680dd3b4c31b3d4edc3f06a142f02bcb879df
25569 Author: Mike Beattie <mike@ethernal.org>
25570 Date: Sun Aug 26 23:16:49 2012 +1200
25572 altosdroid: init device variable... oops!
25574 Signed-off-by: Mike Beattie <mike@ethernal.org>
25576 commit 2c5513c51b187ad26a59b193b401f38c35141d27
25577 Author: Mike Beattie <mike@ethernal.org>
25578 Date: Sun Aug 26 23:16:04 2012 +1200
25580 altosdroid: Rename Connect message, add connected message
25582 Signed-off-by: Mike Beattie <mike@ethernal.org>
25584 commit a6373e84393312ed0fbf22285c704819c2011588
25585 Author: Mike Beattie <mike@ethernal.org>
25586 Date: Sun Aug 26 23:14:09 2012 +1200
25588 altosdroid: init telem blocking list.. oops!
25590 Signed-off-by: Mike Beattie <mike@ethernal.org>
25592 commit 21359f600354e8ee840e839e61ef97d30f3586fc
25593 Author: Mike Beattie <mike@ethernal.org>
25594 Date: Sun Aug 26 23:13:33 2012 +1200
25596 altosdroid: disable NotificationManager stuff for now
25598 Signed-off-by: Mike Beattie <mike@ethernal.org>
25600 commit 54baecc208a40606e3242b2cbd5e66567053646f
25601 Author: Mike Beattie <mike@ethernal.org>
25602 Date: Sun Aug 26 23:12:48 2012 +1200
25604 altosdroid: Convert handlers to use weakreferences
25606 * Also renamed bluetooth start/stop methods
25608 Signed-off-by: Mike Beattie <mike@ethernal.org>
25610 commit bf7def1a7b93867dfe16fe6499ee028747634c41
25611 Author: Mike Beattie <mike@ethernal.org>
25612 Date: Sun Aug 26 15:28:58 2012 +1200
25614 altosdroid: Remove Binder import from TelemetryService
25616 Signed-off-by: Mike Beattie <mike@ethernal.org>
25618 commit 5f4c47389a3d0d10d659a2e00fc74a150b5fed88
25619 Author: Mike Beattie <mike@ethernal.org>
25620 Date: Sun Aug 26 15:28:36 2012 +1200
25622 altosdroid: Add State constants for future usage
25624 Signed-off-by: Mike Beattie <mike@ethernal.org>
25626 commit 6ffcc82d8d18d3f05d4f5881e50dda298b43c114
25627 Author: Mike Beattie <mike@ethernal.org>
25628 Date: Sun Aug 26 15:28:09 2012 +1200
25630 altosdroid: begin adding IPC to TelemetryService
25632 * And add imports for LinkedBlockingQueue... oops!
25634 Signed-off-by: Mike Beattie <mike@ethernal.org>
25636 commit a33333b97e810f50db36f345aab71a3200feccc3
25637 Author: Mike Beattie <mike@ethernal.org>
25638 Date: Sun Aug 26 15:24:19 2012 +1200
25640 altosdroid: remove old Binder from TelemetryService
25642 Signed-off-by: Mike Beattie <mike@ethernal.org>
25644 commit b69796991c1da6baf245349fcc4392668b9b5570
25645 Author: Mike Beattie <mike@ethernal.org>
25646 Date: Sun Aug 26 15:23:17 2012 +1200
25648 altosdroid: begin adding IPC to main thread
25650 Signed-off-by: Mike Beattie <mike@ethernal.org>
25652 commit bcd53483ccf4bbb2f163a011faae6d19a7bbed0d
25653 Author: Mike Beattie <mike@ethernal.org>
25654 Date: Sun Aug 26 15:22:23 2012 +1200
25656 altosdroid: Add TBT initialisation to AltosBluetooth
25658 Signed-off-by: Mike Beattie <mike@ethernal.org>
25660 commit ef29a197ce3318404f37e8a0b24d235e8b024a1f
25661 Author: Mike Beattie <mike@ethernal.org>
25662 Date: Sun Aug 26 15:21:57 2012 +1200
25664 altosdroid: Add debugging statements to AltosBluetooth
25666 Signed-off-by: Mike Beattie <mike@ethernal.org>
25668 commit fb8cd14cca61ca59b95c23e71505607b4509d4ed
25669 Author: Mike Beattie <mike@ethernal.org>
25670 Date: Sun Aug 26 15:21:36 2012 +1200
25672 altosdroid: Add input thread for reading from TBT
25674 Signed-off-by: Mike Beattie <mike@ethernal.org>
25676 commit 5ce132b3366cd120499fcbe22b5fbe96d21b8584
25677 Author: Mike Beattie <mike@ethernal.org>
25678 Date: Sun Aug 26 15:20:42 2012 +1200
25680 altosdroid: Move constructor for AltosBluetooth
25682 Signed-off-by: Mike Beattie <mike@ethernal.org>
25684 commit b59e7d0b201290f2cb0fd494ef28c1402e11ba3b
25685 Author: Mike Beattie <mike@ethernal.org>
25686 Date: Sun Aug 26 15:18:44 2012 +1200
25688 altosdroid: clean up stub functions in AltosBluetooth.java
25690 Signed-off-by: Mike Beattie <mike@ethernal.org>
25692 commit d184638be79dafd6fb43df21040eb52402f54ea5
25693 Author: Mike Beattie <mike@ethernal.org>
25694 Date: Sun Aug 26 15:11:12 2012 +1200
25696 altosdroid: AltosBluetooth.java
25698 * clean up variables/comments
25700 Signed-off-by: Mike Beattie <mike@ethernal.org>
25702 commit bad155538c4630c62ade80afd20830aad37c287e
25703 Author: Mike Beattie <mike@ethernal.org>
25704 Date: Sun Aug 26 15:10:15 2012 +1200
25706 altosdroid: AltosBluetooth.java
25709 * Convert from reflection to using Well Known UUID for SPP.
25710 * clean up local variables
25711 * Add debug conditionals to logging
25712 * remove references to socket type
25714 Signed-off-by: Mike Beattie <mike@ethernal.org>
25716 commit c9689a3ef65ea9da5a7009834add789737ffb6a9
25717 Author: Mike Beattie <mike@ethernal.org>
25718 Date: Sun Aug 26 15:03:54 2012 +1200
25720 altosdroid: Clean up imports in TelemetryService
25722 * Begin adding AltosLib usage
25724 Signed-off-by: Mike Beattie <mike@ethernal.org>
25726 commit ffdfc08c317f503e30604d058749b24c3ca7bafa
25727 Author: Mike Beattie <mike@ethernal.org>
25728 Date: Sun Aug 26 15:00:23 2012 +1200
25730 altosdroid: Add service start/bind/unbind to AltosDroid
25732 Signed-off-by: Mike Beattie <mike@ethernal.org>
25734 commit 95a34caa8343997bcf7d8969ee8ae3124efcb573
25735 Author: Mike Beattie <mike@ethernal.org>
25736 Date: Sun Aug 26 14:57:04 2012 +1200
25738 altosdroid: Remove AltosLib import from main thread
25740 commit cfe93315fc0e4b01a95b8e59f24aca96b5a66daf
25741 Author: Mike Beattie <mike@ethernal.org>
25742 Date: Sun Aug 26 14:55:19 2012 +1200
25744 altosdroid: whitespace
25746 Signed-off-by: Mike Beattie <mike@ethernal.org>
25748 commit 3f3da6626ef41b2cab116d6299d2a89cbf7718a9
25749 Author: Mike Beattie <mike@ethernal.org>
25750 Date: Sun Aug 26 14:54:54 2012 +1200
25752 altosdroid: Re-locate TextView initialisation
25754 Signed-off-by: Mike Beattie <mike@ethernal.org>
25756 commit 917f519a4e876087590a3a260fbbccf4c0ac3e31
25757 Author: Mike Beattie <mike@ethernal.org>
25758 Date: Sun Aug 26 14:54:06 2012 +1200
25760 altosdroid: remove UI components/imports no longer used
25762 Signed-off-by: Mike Beattie <mike@ethernal.org>
25764 commit 80bf63702175322053f2b38c4fff56b653ab7c70
25765 Author: Mike Beattie <mike@ethernal.org>
25766 Date: Sun Aug 26 14:52:30 2012 +1200
25768 altosdroid: excise BluetoothChatService example code
25770 Signed-off-by: Mike Beattie <mike@ethernal.org>
25772 commit 372840b4ebfd3da3cd713b6bc6a8ffc8cd6b6b8c
25773 Author: Mike Beattie <mike@ethernal.org>
25774 Date: Sun Aug 26 14:48:48 2012 +1200
25776 altosdroid: remove TelemetryService activities
25778 service start/stop will be handled by AltosDroid/itself now.
25780 Signed-off-by: Mike Beattie <mike@ethernal.org>
25782 commit 24503eb330bf887f5c76afe2aaa9c9f2ce177460
25783 Author: Mike Beattie <mike@ethernal.org>
25784 Date: Sun Aug 26 14:44:09 2012 +1200
25786 altosdroid: whitespace (spaces to tabs) (part2)
25788 Signed-off-by: Mike Beattie <mike@ethernal.org>
25790 commit 7aab6e6b6e361455a7515fe6db7b0e9a6e4c786c
25791 Author: Mike Beattie <mike@ethernal.org>
25792 Date: Sun Aug 26 14:29:36 2012 +1200
25794 altosdroid: whitespace (spaces to tabs) (part1)
25796 Signed-off-by: Mike Beattie <mike@ethernal.org>
25798 commit 0f3597389977f86a8c1bdff1b7f46107c43ef306
25799 Author: Mike Beattie <mike@ethernal.org>
25800 Date: Sun Aug 26 12:41:24 2012 +1200
25802 altosdroid: Update copyrights
25804 Signed-off-by: Mike Beattie <mike@ethernal.org>
25806 commit 7ecb429fe4682faf209452b1738ff3c8096fc5d5
25807 Author: Keith Packard <keithp@keithp.com>
25808 Date: Fri Aug 24 00:46:55 2012 -0700
25810 altos: Configure telefire SPI and LEDs correctly
25812 This places the telefire SPI bus on USART1 option 2 and
25813 marks the various LED functions with symbolic names.
25815 Signed-off-by: Keith Packard <keithp@keithp.com>
25817 commit 310c1d0bf83448eb12e5d64ac09a4279c25fd258
25818 Author: Keith Packard <keithp@keithp.com>
25819 Date: Fri Aug 24 00:44:35 2012 -0700
25821 altos: telelaunch doesn't need ao_radio_cmac_init
25823 This function was used to initialize the LCO functions, which were
25824 moved to ao_lco.c a few commits back, so ao_radio_cmac_init doesn't
25825 even exist anymore.
25827 Signed-off-by: Keith Packard <keithp@keithp.com>
25829 commit 6581fa1641882198c870c2f7b1340794b9d47f29
25830 Author: Keith Packard <keithp@keithp.com>
25831 Date: Fri Aug 24 00:42:32 2012 -0700
25833 altos: Get ao_pad.c working on telefire v0.1
25835 Monitor all four channels, allow any channel to be fired.
25836 Turn on power LED at startup time.
25838 Signed-off-by: Keith Packard <keithp@keithp.com>
25840 commit 83e0d4352041b3964ea7a133b0f67da9ebaa1c77
25841 Author: Keith Packard <keithp@keithp.com>
25842 Date: Fri Aug 24 00:40:27 2012 -0700
25844 altos: Split out LCO functions from ao_radio_cmac.c to ao_lco.c
25846 These functions are not used in the telelaunch or telefire nodes, so
25847 don't force them to be included.
25849 Signed-off-by: Keith Packard <keithp@keithp.com>
25851 commit c64999c39d6d9242f98bdc9312436c3333115bfd
25852 Author: Keith Packard <keithp@keithp.com>
25853 Date: Fri Aug 24 00:39:46 2012 -0700
25855 altos: Have radio_cmac turn on LEDs as appropriate
25857 Use AO_LED_RX and AO_LED_TX defines if present to control LEDs during
25860 Signed-off-by: Keith Packard <keithp@keithp.com>
25862 commit a8e9906513227600599da12b268ff5f807ae98c7
25863 Author: Keith Packard <keithp@keithp.com>
25864 Date: Fri Aug 24 00:34:55 2012 -0700
25866 altos: Add 'ao_led_set_mask' in the PCA9922 driver
25868 This lets a subset of the LEDs be controlled independent of other LED settings.
25870 Signed-off-by: Keith Packard <keithp@keithp.com>
25872 commit 50b58d703b8b48005a3ca9ad4e3603d6f7ac1430
25873 Author: Keith Packard <keithp@keithp.com>
25874 Date: Fri Aug 24 00:33:38 2012 -0700
25876 altos: Make cc1111 SPI pins configurable
25878 Allow either USART in any configuration. Still only supports one SPI
25881 Signed-off-by: Keith Packard <keithp@keithp.com>
25883 commit 7a0ed0ff4192060854d69e640de2c30105eb2f62
25884 Author: Keith Packard <keithp@keithp.com>
25885 Date: Fri Aug 24 00:27:13 2012 -0700
25887 altos: Disable telefire 'pad' listener when testing radio
25889 Ensures that the radio testing won't block waiting for a firing mode
25892 Signed-off-by: Keith Packard <keithp@keithp.com>
25894 commit 659c0cd3ee4b9581c12ac2cd1b4162bf07a921ce
25895 Author: Keith Packard <keithp@keithp.com>
25896 Date: Sun Aug 19 10:02:16 2012 -0700
25898 altosui: Check for JRE 1.7 in Windows installer
25900 altosui runs fine with version 1.7 (on Linux at least), so allow that
25901 version to satisfy the java check instead of requiring the user to
25904 Signed-off-by: Keith Packard <keithp@keithp.com>
25906 commit ab1279cc6a683595631d7ac8bed7b36e0c8a691c
25907 Author: Keith Packard <keithp@keithp.com>
25908 Date: Sat Aug 18 22:51:47 2012 -0700
25910 Here's the button driver and event queue logic
25912 These were neglected in the commit which was supposed to include them
25914 Signed-off-by: Keith Packard <keithp@keithp.com>
25916 commit 93db8febda03d9a02c5c1ccdc6ad44eaf00a433b
25917 Author: Keith Packard <keithp@keithp.com>
25918 Date: Sat Aug 18 21:26:34 2012 -0700
25920 altos: Add MMA655X driver
25922 Just debug code at this point, will complete on real hardware
25924 Signed-off-by: Keith Packard <keithp@keithp.com>
25926 commit 8457ca81adc9d62a7ffe56a7c0c36f2fcadaa682
25927 Author: Keith Packard <keithp@keithp.com>
25928 Date: Sat Aug 18 21:25:34 2012 -0700
25930 altos/cc1111: Document SPI bus pin options
25932 Just a comment in the source code about which pins each option selects.
25934 Signed-off-by: Keith Packard <keithp@keithp.com>
25936 commit f46d94ca5c969c88dd307d1b684d6fafa2157020
25937 Author: Keith Packard <keithp@keithp.com>
25938 Date: Sat Aug 18 21:24:16 2012 -0700
25940 altos: Use split SPI bus for MS5607 sensor
25942 Leave CS low while releasing the SPI bus when waiting for conversion
25943 complete -- other SPI bus users will use another set of pins.
25945 Signed-off-by: Keith Packard <keithp@keithp.com>
25947 commit a1a48aa9ee0bf7fa6720b34c0f544485caea7cac
25948 Author: Keith Packard <keithp@keithp.com>
25949 Date: Sat Aug 18 21:21:58 2012 -0700
25951 altos: Allow STM SPI bus on multiple pin sets
25953 This allows multiple STM pin groups to be used for each SPI
25954 bus. Useful for the MS5607 sensor which signals conversion complete on
25957 Signed-off-by: Keith Packard <keithp@keithp.com>
25959 commit 00abbbb79de67dc95176fe48b23ce3e8614e8d3a
25960 Author: Mike Beattie <mike@ethernal.org>
25961 Date: Wed Aug 8 07:07:49 2012 +1200
25963 ao-send-telem: make --realtime work
25965 (add "break;" to the case statement for options)
25967 Signed-off-by: Mike Beattie <mike@ethernal.org>
25969 commit 9456332fc16269270a2e9b7ef0b54523800cfe27
25970 Merge: bd02349 4d4ad34
25971 Author: Mike Beattie <mike@ethernal.org>
25972 Date: Wed Aug 8 06:49:15 2012 +1200
25974 Merge branch 'master' of git://git.gag.com/fw/altos
25976 commit 4d4ad34aec0c75c66162b992f1e52947e4685730
25977 Merge: c7f2285 8e4ebd1
25978 Author: Keith Packard <keithp@keithp.com>
25979 Date: Tue Aug 7 11:48:20 2012 -0700
25981 Merge remote-tracking branch 'mjb/master'
25983 commit bd02349111ae0f39b320e6a10a330051ddc39fdf
25984 Merge: 8e4ebd1 c7f2285
25985 Author: Mike Beattie <mike@ethernal.org>
25986 Date: Wed Aug 8 06:46:56 2012 +1200
25988 Merge branch 'master' of git://git.gag.com/fw/altos
25990 commit 8e4ebd1f6eb928b5cb7bcda4ed88851aa9e61bdf
25991 Author: Mike Beattie <mike@ethernal.org>
25992 Date: Wed Aug 8 06:45:03 2012 +1200
25994 Add ao-send-telem to .gitignore
25996 Signed-off-by: Mike Beattie <mike@ethernal.org>
25998 commit c7f228503870c44dfd278ede8b0980dbac73d3c7
25999 Author: Keith Packard <keithp@keithp.com>
26000 Date: Tue Aug 7 11:32:16 2012 -0700
26002 altos: Fix .sdcdbrc file for telebt-v0.1
26004 Signed-off-by: Keith Packard <keithp@keithp.com>
26006 commit c58f3d1a373b20fac3f51037008bcc40955f1348
26007 Author: Keith Packard <keithp@keithp.com>
26008 Date: Tue Aug 7 11:30:47 2012 -0700
26010 altos: Oops. Serial 1 stdin was busted by typo
26012 A typo in the symbol used to enable stdin wakeups from serial1 caused
26013 the input to pend until some other wakeup occurred.
26015 This also makes the serial1 hw flow control pin selects in config 2
26016 work right, although those aren't used by any current product
26018 Signed-off-by: Keith Packard <keithp@keithp.com>
26020 commit 46f87373bc8c28442273ee4f8da3a352223150f5
26021 Author: Keith Packard <keithp@keithp.com>
26022 Date: Mon Aug 6 22:53:52 2012 -0700
26024 altos: Add button driver and event queue
26026 With this, a single task can wait for any button or quadrature input
26029 Signed-off-by: Keith Packard <keithp@keithp.com>
26031 commit 11046bc89b3ce6386f1005fc8476b08f54d6f5fb
26032 Author: Keith Packard <keithp@keithp.com>
26033 Date: Mon Aug 6 21:54:58 2012 -0700
26035 altos: Support multiple quadrature encoders.
26037 Signed-off-by: Keith Packard <keithp@keithp.com>
26039 commit 5f7e61c749b02ed16e368502062e39b0471e9257
26040 Author: Keith Packard <keithp@keithp.com>
26041 Date: Mon Aug 6 20:20:32 2012 -0700
26043 altos: Fix up quadrature driver
26045 Mostly works now, should work reliably with a bit of input filtering.
26047 Signed-off-by: Keith Packard <keithp@keithp.com>
26049 commit ab379493dbe9923db8e458d2f4e0344df17d331c
26050 Author: Keith Packard <keithp@keithp.com>
26051 Date: Mon Aug 6 19:35:02 2012 -0700
26053 Signed-off-by: Keith Packard <keithp@keithp.com>
26055 altos: Test quadrature driver
26057 commit b0b52ca73bc836336ecc70247a9ed1dd633920d9
26058 Author: Keith Packard <keithp@keithp.com>
26059 Date: Mon Aug 6 19:34:34 2012 -0700
26061 altos: Add quadrature driver
26063 Signed-off-by: Keith Packard <keithp@keithp.com>
26065 commit 6171892fa32e8a662a494ec6ba28a82fddc68589
26066 Author: Keith Packard <keithp@keithp.com>
26067 Date: Mon Aug 6 19:33:44 2012 -0700
26069 altos: Add ao_gpio_get and ao_exti_set_mode
26071 Needed to support general GPIO interrupts
26073 Signed-off-by: Keith Packard <keithp@keithp.com>
26075 commit de701d5a234cd21930cf92c9cabebb0e230da9b5
26076 Author: Keith Packard <keithp@keithp.com>
26077 Date: Sun Aug 5 14:58:40 2012 -0700
26079 altos: Build ao_kalman.h from cc1111 subdirs as needed
26081 Signed-off-by: Keith Packard <keithp@keithp.com>
26083 commit fc9aed1ef3485d259722c9b89e19969e0afe257c
26084 Author: Mike Beattie <mike@ethernal.org>
26085 Date: Sun Feb 26 22:30:09 2012 +1300
26087 Adjust service to be persistent.
26089 * Run as a foreground service -> high priority
26090 * Notification set to display as "Ongoing".
26092 Changed logo to be in colour at keithp's request. Greyscale logos still present as *_g.png
26094 Signed-off-by: Mike Beattie <mike@ethernal.org>
26096 commit b80d1f4e8a2df3ace64468a38a815a4f982aa179
26097 Author: Bdale Garbee <bdale@gag.com>
26098 Date: Sun Jun 10 20:04:24 2012 -0600
26100 move from Debian packaged sdcc to new cc1111 package forked from 2.9.0-5
26102 commit 0f82021186565fda10df7893b95deae4a1f32778
26103 Author: Keith Packard <keithp@keithp.com>
26104 Date: Sun Aug 5 12:17:25 2012 -0700
26106 src/cc1111: Enable SPI slave mode
26108 This is untested...
26110 Signed-off-by: Keith Packard <keithp@keithp.com>
26112 commit 39594fdb3e30a1a25dd894c217e3d9d773bab972
26113 Author: Keith Packard <keithp@keithp.com>
26114 Date: Sun Aug 5 12:16:25 2012 -0700
26116 src/cc1111: Allow serial0 without serial1
26118 The ao_serial_speed structure is needed by serial0 too.
26120 Signed-off-by: Keith Packard <keithp@keithp.com>
26122 commit 2610b316eb939c1532061646b05207fcd54d984f
26123 Author: Keith Packard <keithp@keithp.com>
26124 Date: Sun Aug 5 12:15:36 2012 -0700
26126 src/cc1111: Add ao_gpio_set macro
26128 Allows general GPIO-using code to run on cc1111
26130 Signed-off-by: Keith Packard <keithp@keithp.com>
26132 commit 82a37d70e3cacf792c1aa18f8c0d2a19d6f321ed
26133 Author: Keith Packard <keithp@keithp.com>
26134 Date: Sat Aug 4 22:58:48 2012 -0700
26136 altosui: Move 'implements Runnable' from AltosSerial to AltosLink
26138 AltosLink is the class providing the 'run' method, after all...
26140 Signed-off-by: Keith Packard <keithp@keithp.com>
26142 commit af34baf5dc587bee4cffa699ef383f85dde8c7cd
26143 Author: Mike Beattie <mike@ethernal.org>
26144 Date: Thu Aug 2 23:38:26 2012 +1200
26146 Reduce size of textview.
26148 Signed-off-by: Mike Beattie <mike@ethernal.org>
26150 commit 359d7353fd7b7d4d537db04c5e89724502333ff8
26151 Author: Mike Beattie <mike@ethernal.org>
26152 Date: Thu Aug 2 22:09:24 2012 +1200
26154 AltosDroid: Begin re-working Bluetooth code
26156 * Move to using explicit 'magic' UUID, rather than java reflection
26157 * Re-work UI to make it more useful for testing
26158 * Use Insecure RFCOMM only, and remove code that differentiates.
26160 Signed-off-by: Mike Beattie <mike@ethernal.org>
26162 commit c5304ac976dd44344a0b70ae3622e1f2d112a147
26163 Author: Mike Beattie <mike@ethernal.org>
26164 Date: Thu Aug 2 21:20:23 2012 +1200
26166 Fix min/target SDK versions
26168 Signed-off-by: Mike Beattie <mike@ethernal.org>
26170 commit 7481d06bebc2dc1473f451971d8b744c9da4e726
26171 Merge: 599e28b c56dead
26172 Author: Mike Beattie <mike@ethernal.org>
26173 Date: Thu Aug 2 21:18:15 2012 +1200
26175 Merge branch 'master' of ssh://mjb@git.ethernal.org/~/git/altos
26177 commit 599e28b2242c79bdd0960ef16e580e51a2fa3795
26178 Author: Mike Beattie <mike@ethernal.org>
26179 Date: Thu Aug 2 21:16:54 2012 +1200
26181 Re-work external lib support for newer Android SDK
26183 * Remove older *.properties methods of locating lib dir
26184 * clean up Eclipse classpath file
26185 * adjust Makefile.am to link AltosLib.jar into libs/
26187 Signed-off-by: Mike Beattie <mike@ethernal.org>
26189 commit c56dead72f65e7468017656347dba531ab2ca480
26190 Author: Mike Beattie <mike@ethernal.org>
26191 Date: Tue Jul 31 20:05:35 2012 +1200
26193 Ignore autogenerated file: altosui/Info.plist
26195 Signed-off-by: Mike Beattie <mike@ethernal.org>
26197 commit fb79f8fb358f8df25674336cd558fc3998cb7d9e
26198 Author: Mike Beattie <mike@ethernal.org>
26199 Date: Tue Jul 31 20:04:34 2012 +1200
26201 Don't build ao-stmload if stlink is not available.
26203 Signed-off-by: Mike Beattie <mike@ethernal.org>
26205 commit 2e7e304e67bc1e094282c8668fa8cccf09f9c9b4
26206 Author: Keith Packard <keithp@keithp.com>
26207 Date: Sun Jul 29 19:48:08 2012 -0700
26209 altos: Add driver for STM internal flash
26211 Signed-off-by: Keith Packard <keithp@keithp.com>
26213 commit 843fcab46d633e5bb6959286adeb68e41a4c30a3
26214 Author: Keith Packard <keithp@keithp.com>
26215 Date: Sun Jul 29 19:44:56 2012 -0700
26217 altos: Add telefire-v0.1
26219 Signed-off-by: Keith Packard <keithp@keithp.com>
26221 commit e4d244eefa4c779cd9c8a91389bf998c54705b72
26222 Author: Keith Packard <keithp@keithp.com>
26223 Date: Sun Jul 29 19:42:53 2012 -0700
26225 altos: Add software AES implementation
26229 Signed-off-by: Keith Packard <keithp@keithp.com>
26231 commit 21e39811bd234c6f66ab7644864fcc1b8c316998
26232 Author: Keith Packard <keithp@keithp.com>
26233 Date: Sun Jul 29 19:36:50 2012 -0700
26235 altos/cc1111: Fix serial 0 option 2 pins definitions
26237 tx/rx are 4/5, rts/cts are 2/3
26239 Signed-off-by: Keith Packard <keithp@keithp.com>
26241 commit 743dca54012758d3ae54312d542b34afa88495cd
26242 Author: Keith Packard <keithp@keithp.com>
26243 Date: Sun Jul 29 19:35:15 2012 -0700
26245 altosui: Remove duplicate values from info table. Add altitude
26247 No need to have state/call/serial/flight data, those are all in the
26248 header. Having altitude makes Monitor Idle slightly more useful.
26250 Signed-off-by: Keith Packard <keithp@keithp.com>
26252 commit 0bf21399d3d47d58410df4c6ce89fc20fcd42c89
26253 Author: Keith Packard <keithp@keithp.com>
26254 Date: Sun Jul 29 19:34:00 2012 -0700
26256 altosui: Handle Monitor Idle errors better
26258 Deal with missing data by checking for MISSING in more places.
26259 Handle serial communication failures during send by reporting back
26262 Signed-off-by: Keith Packard <keithp@keithp.com>
26264 commit 59588ba34159b27c02e1a886b46497ecfa0cf4d3
26265 Author: Keith Packard <keithp@keithp.com>
26266 Date: Sun Jul 29 16:22:23 2012 -0700
26268 Add ability to re-play telemetry through TeleDongle
26270 This adds a new command to TeleDongle to send arbitrary data, and then
26271 creates a new tool, 'ao-send-telem' that replays existing telemetry
26272 files through TeleDongle.
26274 Signed-off-by: Keith Packard <keithp@keithp.com>
26276 commit 52e920bc7a98edf5c6f2ad0bd59d581011dcd5c9
26277 Author: Keith Packard <keithp@keithp.com>
26278 Date: Sun Jul 22 15:18:27 2012 -0700
26280 altos: Move ao_radio_cmac.c to core (it doesn't depend on hardware)
26282 Signed-off-by: Keith Packard <keithp@keithp.com>
26284 commit 233ab58df8ac8e1fdeab8d4c2f6c8c9d3f6e7be1
26285 Author: Keith Packard <keithp@keithp.com>
26286 Date: Sun Jul 22 11:53:44 2012 -0700
26288 altosui: Move AltosIgnite.java to altoslib
26290 To be shared with altosdroid eventually
26292 Signed-off-by: Keith Packard <keithp@keithp.com>
26294 commit 38f66a31174dd367e39d717c527f555add60a9d4
26295 Author: Keith Packard <keithp@keithp.com>
26296 Date: Fri Jul 20 12:04:17 2012 -0700
26298 tools: Use pkgconfig to find stlink for ao-stmload
26300 Signed-off-by: Keith Packard <keithp@keithp.com>
26302 commit e033a72d3f420e18ed24354c7dfc7e1317a03fb6
26303 Author: Keith Packard <keithp@keithp.com>
26304 Date: Fri Jul 20 11:08:22 2012 -0700
26308 Signed-off-by: Keith Packard <keithp@keithp.com>
26310 commit 15ebd9c75aa57572040e3b1ee41e6f3eb8cf92ee
26311 Author: Keith Packard <keithp@keithp.com>
26312 Date: Thu Jul 19 09:46:20 2012 -0700
26314 altosui: Delay starting KML output for flight and GPS coords
26316 Don't start outputing KML data until the telem record containing
26317 flight number and GPS coordinates are present.
26319 Signed-off-by: Keith Packard <keithp@keithp.com>
26321 commit ada6f2dfc045e77cb9499f20cdec1b4a54ef0db1
26322 Author: Robert Garbee <robert@gag.com>
26323 Date: Wed Jul 18 18:41:00 2012 -0600
26325 telescience: correctly calculating rate values with higher resolution
26327 commit e2b472bbb2418fc13be42dbc7c52beb88479c46d
26328 Merge: 75d6aa6 b242f27
26329 Author: Robert Garbee <robert@gag.com>
26330 Date: Wed Jul 18 14:25:27 2012 -0600
26332 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
26334 commit 75d6aa6f798606f1a6c5a46542065dda81e63b2a
26335 Author: Robert Garbee <robert@gag.com>
26336 Date: Wed Jul 18 14:24:05 2012 -0600
26340 commit 49b1ff4c614d24977b33cd17b583acc87acff476
26341 Author: Robert Garbee <robert@gag.com>
26342 Date: Wed Jul 18 13:41:27 2012 -0600
26344 Timer 3 working with slower clock and all 16 bits.
26346 commit b242f2756a8d9419a9bdba890b9e6b73560bdc19
26347 Author: Keith Packard <keithp@keithp.com>
26348 Date: Wed Jul 18 00:03:54 2012 -0700
26350 altosdroid: Start adding an AltosLink subclass for android
26352 Will talks over bluetooth while providing an AltosLink APi
26354 Signed-off-by: Keith Packard <keithp@keithp.com>
26356 commit f164e48cbeff521d45737794e2046a08322951d6
26357 Author: Keith Packard <keithp@keithp.com>
26358 Date: Wed Jul 18 00:01:51 2012 -0700
26360 altosui: Make scan UI handle incremental telem data
26362 The new telem format doesn't send everything in each telem packet, so
26363 we need to handle updating information incrementally in the scan
26364 results. This involved clearing old scan data when switching
26365 frequencies and then updating existing entries with new data as it arrives.
26367 Signed-off-by: Keith Packard <keithp@keithp.com>
26369 commit a698cd68968fc0be5f96b1729cdea2f65d2ccbf6
26370 Author: Keith Packard <keithp@keithp.com>
26371 Date: Tue Jul 17 23:59:13 2012 -0700
26373 altos: Toggling telemetry monitoring would replay the telem queue
26375 Using the 'm' command to turn telem off and back on would end up going
26376 around the whole telemetry queue replaying everything there as the
26377 wait loop would exit when disabling monitoring even if the ring was empty.
26379 Signed-off-by: Keith Packard <keithp@keithp.com>
26381 commit 9fd5e3c28fb0fd6da8641e7dd18b9912866d1b75
26382 Author: Keith Packard <keithp@keithp.com>
26383 Date: Tue Jul 17 21:06:07 2012 -0700
26385 altos: With debug cables disconnected, CC1120 seems happy at +16dBm
26387 Let's see how it goes...
26389 Signed-off-by: Keith Packard <keithp@keithp.com>
26391 commit 700818c8ff0518e79bff2f0e80b2cc3cb3b48bf0
26392 Author: Keith Packard <keithp@keithp.com>
26393 Date: Tue Jul 17 21:04:58 2012 -0700
26395 altosui: Accept variations in spacing for igniter status reply
26397 Megametrum uses different white space; just deal with it here.
26399 Signed-off-by: Keith Packard <keithp@keithp.com>
26401 commit f6921c9040b1f1fc4408d163532b0695a3611195
26402 Author: Keith Packard <keithp@keithp.com>
26403 Date: Tue Jul 17 21:04:23 2012 -0700
26405 altoslib: Move idle monitor managing code to altoslib
26407 More stuff to be shared (potentially)
26409 Signed-off-by: Keith Packard <keithp@keithp.com>
26411 commit b4be63627e146c7c868b5b3468d34880a561cfba
26412 Author: Keith Packard <keithp@keithp.com>
26413 Date: Tue Jul 17 20:44:55 2012 -0700
26415 altos: Megametrum ADC values are 12 bits, discard low 4 for telemetry
26417 We've only got space for 8 bits for the ADC values for pyro channels,
26418 discard the low 4 bits instead of the low 8 bits.
26420 Signed-off-by: Keith Packard <keithp@keithp.com>
26422 commit 97c1cfee929a35dd1596dc02ce519b80132f3c5c
26423 Author: Keith Packard <keithp@keithp.com>
26424 Date: Tue Jul 17 20:43:31 2012 -0700
26426 altoslib: Don't use MISSING values in max computations
26428 Early telemetry state may be missing critical data, don't use MISSING
26429 values in computing max ranges.
26431 Signed-off-by: Keith Packard <keithp@keithp.com>
26433 commit 99b7eaf8d1b312443b842d078fb8464032b3a39b
26434 Author: Keith Packard <keithp@keithp.com>
26435 Date: Tue Jul 17 20:42:42 2012 -0700
26437 altoslib: Fix MM conversion functions
26439 Pressure is already reported in Pa, no need to convert that.
26440 Voltage divider computations were backwards.
26442 Signed-off-by: Keith Packard <keithp@keithp.com>
26444 commit e93c6bcc799d76d4ff425815e2601a25e6796229
26445 Author: Robert Garbee <robert@gag.com>
26446 Date: Tue Jul 17 13:23:48 2012 -0600
26448 first work on PWM input to TeleScience, 'p' command displays timer 1
26450 commit a5d873d47b3b16ca32559b4de668bf07b25eddb0
26451 Author: Keith Packard <keithp@keithp.com>
26452 Date: Tue Jul 17 01:24:52 2012 -0700
26454 altos: Place STM config values at fixed addresses for re-use
26456 Just like cc1111, stick the serial number and radio calibration values
26457 at known fixed addresses so that when re-flashing the board, we can go
26458 find the existing values.
26460 Signed-off-by: Keith Packard <keithp@keithp.com>
26462 commit 20877ae9de8bb5d3a29e2a96024e53afbd396f55
26463 Author: Keith Packard <keithp@keithp.com>
26464 Date: Tue Jul 17 01:18:45 2012 -0700
26466 Add ao-stmload tool
26468 This loads an ELF image through the STlink programming interface using
26469 the stlink utility library
26471 Signed-off-by: Keith Packard <keithp@keithp.com>
26473 commit eda636c5f309b85282b4142118ee65673d28d137
26474 Author: Keith Packard <keithp@keithp.com>
26475 Date: Mon Jul 16 15:36:20 2012 -0700
26477 altosui: Skip unknown data when parsing ADC for idle monitoring
26479 This resolves an infinite loop when talking to megametrum.
26481 Signed-off-by: Keith Packard <keithp@keithp.com>
26483 commit 52196975c447851f14619213c1de5101d334eebc
26484 Author: Keith Packard <keithp@keithp.com>
26485 Date: Mon Jul 16 15:35:11 2012 -0700
26487 altosui: Move serial datastream parser to altoslib
26489 instead of having it in altosui
26491 Signed-off-by: Keith Packard <keithp@keithp.com>
26493 commit 0edb5616a70fd480317acc99ec3c28c662aa8556
26494 Author: Keith Packard <keithp@keithp.com>
26495 Date: Mon Jul 16 15:34:01 2012 -0700
26497 altos: megametrum depends on ao_companion.h
26499 Signed-off-by: Keith Packard <keithp@keithp.com>
26501 commit 5860f75677ee20fcf35ab89a6b62f3e14a1c32f5
26502 Author: Keith Packard <keithp@keithp.com>
26503 Date: Mon Jul 16 15:32:26 2012 -0700
26505 altos: Enable pyro channel control in telepyro
26507 This should make the board actually work now.
26509 Signed-off-by: Keith Packard <keithp@keithp.com>
26511 commit 3ce645a79b54e22d7835c6e390a22a5ad501a339
26512 Author: Keith Packard <keithp@keithp.com>
26513 Date: Mon Jul 16 15:30:29 2012 -0700
26515 altos: Add manual firing command for extra pyro channels
26517 In parallel with the existing igniter commands, this tests the
26518 programmable pyro channels
26520 Signed-off-by: Keith Packard <keithp@keithp.com>
26522 commit 6581eefbdbd8d3e94f615bdf11652a000d131c8e
26523 Author: Keith Packard <keithp@keithp.com>
26524 Date: Mon Jul 16 15:27:58 2012 -0700
26526 altos: Use 'HAS_ORIENT' to enable orientation selection in pyro code
26528 Don't expose orientation options when no orientation data is available
26530 Signed-off-by: Keith Packard <keithp@keithp.com>
26532 commit 1887ca3d7d4a0259686f8c1e68d1e47c47b4ab84
26533 Author: Keith Packard <keithp@keithp.com>
26534 Date: Mon Jul 16 15:25:47 2012 -0700
26536 altos: Pass flight dynamics to companion boards
26538 Necessary for TelePyro
26540 Signed-off-by: Keith Packard <keithp@keithp.com>
26542 commit 90507d4f7ef77b0870a032b1d9809898c2924721
26543 Author: Keith Packard <keithp@keithp.com>
26544 Date: Mon Jul 16 15:24:21 2012 -0700
26546 altos: Make ao_tick_count visible
26548 Necessary to fetch it when interrupts are already disabled as we can't
26551 Signed-off-by: Keith Packard <keithp@keithp.com>
26553 commit 184e2ff4790974733df57facdeeb96bfe692ab54
26554 Author: Keith Packard <keithp@keithp.com>
26555 Date: Mon Jul 16 15:21:21 2012 -0700
26557 altos: Remove some debug code from avr ADC driver
26559 Signed-off-by: Keith Packard <keithp@keithp.com>
26561 commit e7ca3a7849b3cbbb38143d35fe86972290bd4e61
26562 Author: Keith Packard <keithp@keithp.com>
26563 Date: Mon Jul 16 15:18:12 2012 -0700
26565 altos: Make sure telepyro ao_product.h is built before .o files
26567 Signed-off-by: Keith Packard <keithp@keithp.com>
26569 commit 4de789331098abc24abcb9390a35aef889a41784
26570 Author: Keith Packard <keithp@keithp.com>
26571 Date: Mon Jul 16 14:47:53 2012 -0700
26573 altos: Make storage addresses datatype configurable
26575 No sense using 32 bits for tiny hardware
26577 Signed-off-by: Keith Packard <keithp@keithp.com>
26579 commit 84d5e00d417af4924594908d19346bb965089cdd
26580 Author: Keith Packard <keithp@keithp.com>
26581 Date: Mon Jul 16 14:44:40 2012 -0700
26583 src: Add driver for AVR internal eeprom. Use for telepyro config.
26585 Signed-off-by: Keith Packard <keithp@keithp.com>
26587 commit 2a23030031c31267fc4f14accd9220f285c03b61
26588 Author: Keith Packard <keithp@keithp.com>
26589 Date: Mon Jul 16 14:40:49 2012 -0700
26591 altos: No space for pyro help on TP v0.1
26593 AVR doesn't have enough ram to hold the help messages, and we can't
26596 Signed-off-by: Keith Packard <keithp@keithp.com>
26598 commit 366217e86a4c353012b5102322ee6927f7b27a21
26599 Author: Keith Packard <keithp@keithp.com>
26600 Date: Mon Jul 16 14:39:05 2012 -0700
26602 altos: Remove unused 'func' from ao_config_set
26604 Signed-off-by: Keith Packard <keithp@keithp.com>
26606 commit 81b7b58c9df01847fa47747deeff8c3c91304ad1
26607 Author: Keith Packard <keithp@keithp.com>
26608 Date: Mon Jul 16 14:37:58 2012 -0700
26610 altos/avr: Remove debugging command from USB driver
26612 Signed-off-by: Keith Packard <keithp@keithp.com>
26614 commit 42a51becf4b76f23dbd4f5f80f8879ce696aa543
26615 Author: Keith Packard <keithp@keithp.com>
26616 Date: Mon Jul 16 14:36:51 2012 -0700
26618 altos/avr: Remove debugging printf in avr stdio startup
26620 Signed-off-by: Keith Packard <keithp@keithp.com>
26622 commit 0cfd22baa6af44e053428c30c1a95cf5551b68af
26623 Author: Keith Packard <keithp@keithp.com>
26624 Date: Sat Jul 14 02:44:17 2012 -0700
26626 src: Add explicit 'pin' argument to ao_enable_output
26628 This lets the cc1111 use the atomic bit operation instead of a mask,
26629 which is immune to interrupt issues as well as being a shorter code sequence.
26631 Signed-off-by: Keith Packard <keithp@keithp.com>
26633 commit 37032e4b0cbac4c823e3dd18e60ad8900e9ceff1
26634 Author: Keith Packard <keithp@keithp.com>
26635 Date: Sat Jul 14 01:29:50 2012 -0700
26637 altos/megametrum: Support the four additional pyro channels
26639 These use the new pyro code to allow for some flexibility in programming.
26641 Signed-off-by: Keith Packard <keithp@keithp.com>
26643 commit 82b50fc1b7f2c6af7264fbad2c35508abc15e81e
26644 Author: Keith Packard <keithp@keithp.com>
26645 Date: Sat Jul 14 01:28:55 2012 -0700
26647 altos/stm: Expose ao_gpio_set which sets a specific GPIO pin
26649 Will need versions for other architectures
26651 Signed-off-by: Keith Packard <keithp@keithp.com>
26653 commit 726e0f2c547b6bae1f1e640e2c1155c0b9631a9b
26654 Author: Keith Packard <keithp@keithp.com>
26655 Date: Sat Jul 14 01:28:31 2012 -0700
26657 stm: running out of memory in MM -- reduce stack to 668 bytes
26659 Signed-off-by: Keith Packard <keithp@keithp.com>
26661 commit d90587535676f9492f0fde6b974353158104ef88
26662 Author: Keith Packard <keithp@keithp.com>
26663 Date: Sat Jul 14 01:26:38 2012 -0700
26665 altos: Add arbitrary pyro channel support
26667 Programmed by specifying a conjunction of flight conditions that
26668 trigger the igniter to fire.
26670 Signed-off-by: Keith Packard <keithp@keithp.com>
26672 commit 09633cac697e37d770b2b666ab20cab30628484f
26673 Author: Keith Packard <keithp@keithp.com>
26674 Date: Sat Jul 14 01:24:14 2012 -0700
26676 altos/stm: Force STM stack to start at the top of RAM
26678 Using a fixed size means crashing if there's not enough space for
26679 that, or wasting memory if there's too much.
26681 Signed-off-by: Keith Packard <keithp@keithp.com>
26683 commit b5f6d4e5251a825395c93916afa3af659c678498
26684 Author: Keith Packard <keithp@keithp.com>
26685 Date: Wed Jul 11 19:15:32 2012 -0700
26687 altosui: Abstract remote connection timeout stuff
26689 This moves some of the logic for managing when to present the 'cancel'
26690 dialog for remote operations to altoslib.
26692 Signed-off-by: Keith Packard <keithp@keithp.com>
26694 commit f078a591cf2fafe89bb1bb883f49d80750129d44
26695 Author: Keith Packard <keithp@keithp.com>
26696 Date: Wed Jul 11 14:28:53 2012 -0700
26698 altosui: Remove a bunch of debugging printfs
26700 These aren't useful at this point.
26702 Signed-off-by: Keith Packard <keithp@keithp.com>
26704 commit 846a6298e4a8bfbe87bb24d7b0802c0bf6f233be
26705 Author: Keith Packard <keithp@keithp.com>
26706 Date: Wed Jul 11 13:53:30 2012 -0700
26708 Report RSSI values in monitor idle UI (trac #44)
26710 This adds a new 's' command to TeleDongle to report RSSI value from last
26711 received packet, and then has AltosUI request that value when closing
26714 Signed-off-by: Keith Packard <keithp@keithp.com>
26716 commit cf44ea354c2d1780cee343132c6058e11e9eefa3
26717 Author: Keith Packard <keithp@keithp.com>
26718 Date: Wed Jul 11 13:52:32 2012 -0700
26720 altos: Fix gcc compiler warnings in GPS code
26722 unused variables and mis-matches in printf format codes.
26724 Signed-off-by: Keith Packard <keithp@keithp.com>
26726 commit fe70611c3c7d4b8cce3b5292f0ec549f3191bf86
26727 Author: Keith Packard <keithp@keithp.com>
26728 Date: Wed Jul 11 13:50:56 2012 -0700
26730 altos: Create macros to convert from/to radio RSSI representation
26732 AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI.
26734 Removes a bunch of open-coded versions of the same function.
26736 Signed-off-by: Keith Packard <keithp@keithp.com>
26738 commit 18431c88c8a6cb267922b97192e8b7ddb88d0e7e
26739 Author: Keith Packard <keithp@keithp.com>
26740 Date: Wed Jul 11 13:49:26 2012 -0700
26742 altos: Have 'make clean' remove all programs, even old ones
26744 This makes sure that changing version numbers doesn't leave old
26745 compiled output lying around.
26747 Signed-off-by: Keith Packard <keithp@keithp.com>
26749 commit 726f47c8a07f060aed930e1d102a1e8b5a5c7aed
26750 Author: Keith Packard <keithp@keithp.com>
26751 Date: Wed Jul 11 13:47:25 2012 -0700
26753 altos: remove optimization for 'help' that confuses cc1111 compiler
26755 The cc1111 compiler gets this very wrong and prints piles of garbage
26757 Signed-off-by: Keith Packard <keithp@keithp.com>
26759 commit 7be98836e69a222b2f9f4baacddcf12d168e2207
26760 Author: Keith Packard <keithp@keithp.com>
26761 Date: Wed Jul 11 13:40:54 2012 -0700
26763 Add megametrum outline to doc dir
26765 And install it alongside telemetrum-outline
26767 Signed-off-by: Keith Packard <keithp@keithp.com>
26769 commit cc5d106f014f714a9a2d5f595a2de0da8f7da80a
26770 Author: Keith Packard <keithp@keithp.com>
26771 Date: Wed Jul 11 13:40:07 2012 -0700
26773 altos: Ignore megametrum built files
26775 Signed-off-by: Keith Packard <keithp@keithp.com>
26777 commit 675ccd41e3b668cd4e1d2dd282dd317a00d00151
26778 Author: Keith Packard <keithp@keithp.com>
26779 Date: Wed Jul 11 00:35:21 2012 -0700
26781 Get AltOS version numbers into Mac 'about' dialog
26783 Generate Info.plist from Info.plist.in to correctly set the VERSION
26784 information. This also changes some strings around to make them look better
26786 Signed-off-by: Keith Packard <keithp@keithp.com>
26788 commit 46407f7f3e4d2b6e74b3a2e90b38736a792cfc54
26789 Author: Keith Packard <keithp@keithp.com>
26790 Date: Tue Jul 10 22:41:59 2012 -0700
26792 altos: Force 434.550Mhz by connecting debug gnd and clk (trac #41)
26794 Check for pin P2_2 low at startup and set the frequency to
26795 434.550MHz. This value won't get written to flash, so rebooting again
26796 will restore the configured frequency.
26798 Signed-off-by: Keith Packard <keithp@keithp.com>
26800 commit aa305da7e5dc182c99c09e422c053d85ed48d5d5
26801 Author: Keith Packard <keithp@keithp.com>
26802 Date: Tue Jul 10 22:09:44 2012 -0700
26804 altos: Continuously update ground state while on pad (trac #42)
26806 Average data for 5 seconds, wait 5 seconds and if still in pad mode,
26807 replace the existing data with the new data. This should avoid
26808 averaging in boost data while still keeping things reasonably current.
26810 Signed-off-by: Keith Packard <keithp@keithp.com>
26812 commit 0b92164143aaf0d2aa3d5d742484391c16545289
26813 Author: Keith Packard <keithp@keithp.com>
26814 Date: Tue Jul 10 22:08:28 2012 -0700
26816 altos: Set HAS_FLIGHT_DEBUG=1 to include the flight debugging commands
26818 This leaves USB enabled, and adds the 'F' command to dump
26819 internal flight state.
26821 Signed-off-by: Keith Packard <keithp@keithp.com>
26823 commit fb60d87b02c0fc83a0b4268212f0b6b740c984e3
26824 Author: Keith Packard <keithp@keithp.com>
26825 Date: Tue Jul 10 20:35:19 2012 -0700
26827 altos: Signal continuity over radio in pad mode (trac #40)
26829 This is especially useful for telemini which has no beeper, allowing
26830 you to hear the continuity signal while at the pad over the air.
26832 Signed-off-by: Keith Packard <keithp@keithp.com>
26834 commit bca72b782a2909ecedef15ad589292647221ca56
26835 Author: Keith Packard <keithp@keithp.com>
26836 Date: Tue Jul 10 20:34:02 2012 -0700
26838 altos: Add 'void' parameter to ao_fec_decode callback parameter
26840 This keeps the compiler from whinging about the lack of a prototype.
26842 Signed-off-by: Keith Packard <keithp@keithp.com>
26844 commit aafa8859ecb27383f697b98f6991643b44f4721a
26845 Author: Keith Packard <keithp@keithp.com>
26846 Date: Tue Jul 10 20:32:31 2012 -0700
26848 altos: Save some memory.
26850 A few minor space savings in ao_cmd.c and ao_config.c. Don't build
26851 unused conversion functions ao_altitude_to_pres and ao_temp_to_dC
26853 Signed-off-by: Keith Packard <keithp@keithp.com>
26855 commit a60c5a728530e4659a6750d8d5b87000735d4531
26856 Author: Keith Packard <keithp@keithp.com>
26857 Date: Tue Jul 10 15:15:00 2012 -0700
26859 altos: Improve ao_flight_test a bit
26861 Add -i flag to include flight description
26862 Have run-tests know how many failures to expect
26863 Add run_baro to plot a single flight using the baro-only mode
26865 Signed-off-by: Keith Packard <keithp@keithp.com>
26867 commit b89d37d357273b97050c00d7fe12022e32799fa8
26868 Author: Keith Packard <keithp@keithp.com>
26869 Date: Tue Jul 10 15:13:55 2012 -0700
26871 altos: add some (unused) test code for different soft-decision sizes
26873 This lets us experiment with hard-decision and other possible
26874 soft_decision bit depths.
26876 Signed-off-by: Keith Packard <keithp@keithp.com>
26878 commit 6694cedd560a7ea9520ef11472c2770b489187c0
26879 Author: Keith Packard <keithp@keithp.com>
26880 Date: Tue Jul 10 15:13:18 2012 -0700
26882 altos: Eliminate compiler warnings when building ao_flight_test
26884 We turn on a pile of warnings for that.
26886 Signed-off-by: Keith Packard <keithp@keithp.com>
26888 commit 1ae3f467a1d7be2fc3b1a45ba12568a3a25a0099
26889 Author: Keith Packard <keithp@keithp.com>
26890 Date: Tue Jul 10 15:11:36 2012 -0700
26892 altos: Rename *_mm.c back to *.c
26894 Was just a temporary hack to keep cc1111 products building during MM development.
26896 Signed-off-by: Keith Packard <keithp@keithp.com>
26898 commit 702ca87983594880d7926d2317d63802af82746e
26899 Author: Keith Packard <keithp@keithp.com>
26900 Date: Tue Jul 10 15:07:34 2012 -0700
26902 altos: remove stale ao_flight.c and ao_sample.c
26904 The mega-metrum versions are now the official versions
26906 Signed-off-by: Keith Packard <keithp@keithp.com>
26908 commit 31b05454ec8d90b89fa3039563ff0e86ae80b2a0
26909 Author: Keith Packard <keithp@keithp.com>
26910 Date: Tue Jul 3 21:02:20 2012 -0700
26912 altos: Move profiling settings to Makefile
26914 Instead of splitting the changes across Makefile and ao_pins.h, put
26915 them both in Makefile to simplify enabling profiling.
26917 Signed-off-by: Keith Packard <keithp@keithp.com>
26919 commit 939ad8bfd640ed55116703a58f87af06e75ef87e
26920 Author: Keith Packard <keithp@keithp.com>
26921 Date: Tue Jul 3 21:01:01 2012 -0700
26923 altos: Crank up the gaussian noise in the FEC test
26925 This lets us check to make sure our receive performance isn't
26926 degrading at all, instead of just making sure we can receive
26927 perfect packets well.
26929 Signed-off-by: Keith Packard <keithp@keithp.com>
26931 commit e8ab00cc45e48230e3b2018ce959114d3fedd228
26932 Author: Keith Packard <keithp@keithp.com>
26933 Date: Tue Jul 3 20:59:35 2012 -0700
26935 altos: Viterbi performance improvments. Down to 5.7ms for command decode
26937 Stealing more of Phil's good ideas, decoding a command mode packet has
26938 been reduced from 9ms to 5.7ms. Lots more comments to help future-me
26939 figure out how this code works.
26941 Signed-off-by: Keith Packard <keithp@keithp.com>
26943 commit ea957f9e6144f8411ac84ee2905700f55f5a6e8a
26944 Author: Keith Packard <keithp@keithp.com>
26945 Date: Tue Jul 3 00:29:43 2012 -0700
26947 altosui: Fix flight data download for TM. Look for MM flights when graphing
26949 A couple of minor fixes, the first to not force the log format so that
26950 TM/Tm data will be downloaded correctly and the second to expand the
26951 set of files to include '.mega' files when plotting data.
26953 Signed-off-by: Keith Packard <keithp@keithp.com>
26955 commit 933fc7e4c2f617e49e1cfdf45b83695290b51456
26956 Author: Keith Packard <keithp@keithp.com>
26957 Date: Mon Jul 2 23:44:10 2012 -0700
26959 altos: Do not block igniters on the radio mutex.
26961 Blocking igniters on the radio mutex fails when doing igniter testing
26962 over the RF link; the packet receiver task will never release the
26963 mutex and the CPU at the same time, causing the system to lock up.
26965 Signed-off-by: Keith Packard <keithp@keithp.com>
26967 commit 50b343d389039eae082e82b8ac0b76ae3e2b3ad4
26968 Author: Bdale Garbee <bdale@gag.com>
26969 Date: Sun Jul 1 23:24:20 2012 -0600
26971 extend cross-compiler availability logic to all target CPUs, not just ARM
26973 commit f0ec8416f2e308e40e1b9f34a7c2549989fee5fb
26974 Author: Bdale Garbee <bdale@gag.com>
26975 Date: Sat Jun 30 13:00:33 2012 -0600
26977 conditionalize build of ARM binaries on presence of arm-none-eabi-gcc in PATH
26979 commit edbc5d27c8c2936b59ff5289276d9198b501ebc8
26980 Author: Keith Packard <keithp@keithp.com>
26981 Date: Thu Jun 28 17:43:36 2012 -0700
26983 altos: Declare cc1111 accel_ref as unsigned so the math works
26985 If accel_ref is signed, then the careful shifting and dividing dance
26986 necessary to correct for changes in the relationship between the 5V
26987 and 3.3V supplies always generates zero.
26989 Signed-off-by: Keith Packard <keithp@keithp.com>
26991 commit ccf64117662fc800a07b3a25e52255b80f8b5eaf
26992 Author: Keith Packard <keithp@keithp.com>
26993 Date: Thu Jun 28 16:42:59 2012 -0700
26995 Update version to 1.0.9.6
26997 Signed-off-by: Keith Packard <keithp@keithp.com>
26999 commit ca1bc20735a170a77066f5f37e0ad728899a3989
27000 Author: Keith Packard <keithp@keithp.com>
27001 Date: Thu Jun 28 16:05:56 2012 -0700
27003 altos: Disable MS5607 interrupt in the handler
27005 Avoids having the interrupt re-raised multiple times until the reading
27006 task finally wakes up.
27008 Signed-off-by: Keith Packard <keithp@keithp.com>
27010 commit 572e1664938c7ce6c308b36779f6a412959e03f1
27011 Author: Keith Packard <keithp@keithp.com>
27012 Date: Wed Jun 27 23:11:27 2012 -0700
27014 altos: Track missed HMC5883 interrupts
27016 When it fails to signal conversion complete to the CPU, keep track of
27017 that and report it with the rest of the current data.
27019 Signed-off-by: Keith Packard <keithp@keithp.com>
27021 commit 79dbe1a5e46d7f0b8929400897631ab969cd2bc0
27022 Author: Keith Packard <keithp@keithp.com>
27023 Date: Wed Jun 27 23:09:16 2012 -0700
27025 altos: Increase default STM stack to 648 bytes
27027 512 seems cozy given the printf implementation we're using and the
27028 extensive interrupts.
27030 Signed-off-by: Keith Packard <keithp@keithp.com>
27032 commit aab7b31b71aa7c87c5a5003084e4b7773c30835f
27033 Author: Keith Packard <keithp@keithp.com>
27034 Date: Wed Jun 27 23:05:36 2012 -0700
27036 altos: panic if MPU6000 self test fails
27038 Don't try to fly if the board isn't working right.
27040 Signed-off-by: Keith Packard <keithp@keithp.com>
27042 commit f9f65211c378849270a6138fda05ed2a166f7d82
27043 Author: Keith Packard <keithp@keithp.com>
27044 Date: Wed Jun 27 23:04:25 2012 -0700
27046 altos: Disable mag sensor for megametrum
27048 It doesn't work unless USB is connected or occasionally while the
27049 debug port is enabled. It's mystic.
27051 Signed-off-by: Keith Packard <keithp@keithp.com>
27053 commit dd623b21cb904238c6d903b6936ff2f8ebf6f339
27054 Author: Keith Packard <keithp@keithp.com>
27055 Date: Wed Jun 27 23:03:33 2012 -0700
27057 altos: Allow megametrum to be built without using the mag sensor
27059 I'm having trouble getting it working reliably, so we'll like disable it
27060 for now. This patch makes that possible.
27062 Signed-off-by: Keith Packard <keithp@keithp.com>
27064 commit bd21c050fd8b96b33ab6859c942bf55cf2b91868
27065 Author: Keith Packard <keithp@keithp.com>
27066 Date: Wed Jun 27 19:47:52 2012 -0700
27068 altos: Make profiling Viterbi decoder more useful
27070 This blocks starting the decoder until all of the data have arrived so
27071 that the time spent in the decoder is easily computed.
27073 Signed-off-by: Keith Packard <keithp@keithp.com>
27075 commit 407cefae9cb95c5910b3bd79851776c48729e06b
27076 Author: Keith Packard <keithp@keithp.com>
27077 Date: Wed Jun 27 19:45:22 2012 -0700
27079 altos: Unroll viterbi state loop for >30% performance boost
27081 9.3ms vs 14.7ms, a clear win.
27083 Signed-off-by: Keith Packard <keithp@keithp.com>
27085 commit 4f258fe565dc3e58b83761bfa1a2276946012163
27086 Author: Keith Packard <keithp@keithp.com>
27087 Date: Wed Jun 27 17:18:57 2012 -0700
27089 altos: Clean up STM I2C clock computations
27091 Fix both clock time and rise time.
27093 Signed-off-by: Keith Packard <keithp@keithp.com>
27095 commit 84f9a525c64491afa9b7a565e3c10a4cee106e14
27096 Author: Keith Packard <keithp@keithp.com>
27097 Date: Wed Jun 27 17:17:44 2012 -0700
27099 altos: Clean up radio CRC handling
27101 Make the FEC code just set the CRC_OK bit like the cc1111 radio does;
27102 eliminates a bunch of weird conventions across the FEC API.
27104 Signed-off-by: Keith Packard <keithp@keithp.com>
27106 commit b0b7f5da2d29716959c6793d744e47a3d435c247
27107 Author: Keith Packard <keithp@keithp.com>
27108 Date: Wed Jun 27 14:38:35 2012 -0700
27110 altos: get MPU6000 I2C link working reliably
27112 This slows the i2c bus to 100kHz (yuck), sets the rise time to spec
27113 (it was way off) and adds more delays during bus setup. I've run this
27114 for hours now without trouble. Will try to adjust things back to fast
27115 mode and see if I can make that work as 100kHz isn't fast enough to
27116 reliably get data at 100 samples/sec.
27118 Signed-off-by: Keith Packard <keithp@keithp.com>
27120 commit e63d624f9670b5e2e002fcd5f24b80cf7f1effdf
27121 Author: Keith Packard <keithp@keithp.com>
27122 Date: Wed Jun 27 14:35:56 2012 -0700
27124 altos: reorder stm USB state stores to avoid races
27126 Must set ao_usb_in_pending before telling USB about new data or an
27127 interrupt could arrive at the wrong time to clear it.
27129 Same for ao_usb_in_flushed.
27131 Without these changes, I've seen the USB bus lock up on occasion,
27132 waiting for an IN packet to consume data, but with no IN data pending
27135 Signed-off-by: Keith Packard <keithp@keithp.com>
27137 commit 08a4ed8fe794a2b2b52147bd5535fe0954822e95
27138 Author: Keith Packard <keithp@keithp.com>
27139 Date: Wed Jun 27 14:34:53 2012 -0700
27141 altos: include targe SPI speed in get request
27143 STM needs it to be provided when enabling the SPI device, so just fix
27144 AVR and cc1111 to do the same.
27146 Signed-off-by: Keith Packard <keithp@keithp.com>
27148 commit 1a1d4a557a30e2e743936b828b654187ec562ca8
27149 Author: Keith Packard <keithp@keithp.com>
27150 Date: Wed Jun 27 02:46:27 2012 -0700
27152 altos: Wait for i2c START condition before setting interrupt bits
27154 This seems better than the random loop that it replaces, but I still
27155 have no idea why this is required; it doesn't coorespond to the docs
27158 Signed-off-by: Keith Packard <keithp@keithp.com>
27160 commit 9695a217e13f9d194b6dc40e2696017e5f8e8176
27161 Author: Keith Packard <keithp@keithp.com>
27162 Date: Wed Jun 27 01:22:32 2012 -0700
27164 altos: disable FEC debug on MM
27166 Seems to work; we'll leave the code around in case something bad
27169 Signed-off-by: Keith Packard <keithp@keithp.com>
27171 commit b96eece8e42df0713fc92d47b6bb27604c0168a2
27172 Author: Keith Packard <keithp@keithp.com>
27173 Date: Wed Jun 27 01:22:00 2012 -0700
27175 altos: Clean up cc1120 driver a bit
27177 Make some variables static, remove stale debug code
27179 Signed-off-by: Keith Packard <keithp@keithp.com>
27181 commit a00aff5ee93ea9763b5c0466fcecc823cad135ef
27182 Author: Keith Packard <keithp@keithp.com>
27183 Date: Wed Jun 27 01:20:43 2012 -0700
27185 altos: Don't try to grab radio while firing MM igniters
27187 If you're in idle mode, you stop forever as the packet mode receiver
27188 will own the radio mutex forever.
27190 Signed-off-by: Keith Packard <keithp@keithp.com>
27192 commit 8fc643c9768f0db31a248331681af9490f5715af
27193 Author: Keith Packard <keithp@keithp.com>
27194 Date: Wed Jun 27 01:19:05 2012 -0700
27196 altos: stm i2c debug code was calling flush() even when disabled
27198 The fancy stm i2c debugging code had calls to flush() that were
27199 invoked outside of the conditionals leading to all kinds of fun --
27200 flush() may re-enable interrupts, yield or do all kinds of wacky
27201 stuff, none of which is appropriate from the middle of a device driver
27203 Signed-off-by: Keith Packard <keithp@keithp.com>
27205 commit 0285696e5280fc64774b6c3a2fcdaa36bd36ae7c
27206 Author: Keith Packard <keithp@keithp.com>
27207 Date: Wed Jun 27 01:17:51 2012 -0700
27209 altos: mpu6000 requires a delay during start
27211 I have no idea why this is required, but the mpu6000 will not come up
27212 and run if this isn't present.
27214 Signed-off-by: Keith Packard <keithp@keithp.com>
27216 commit 4847595e0383e5ff9c5a373f3c7f2af8c210c50a
27217 Author: Keith Packard <keithp@keithp.com>
27218 Date: Tue Jun 26 23:25:00 2012 -0700
27220 altos: ao_ignite.c is no longer cc1111 specific
27224 Signed-off-by: Keith Packard <keithp@keithp.com>
27226 commit 8efac8eb99a9aabb45d9fbf742e4be91e4b331a5
27227 Author: Keith Packard <keithp@keithp.com>
27228 Date: Tue Jun 26 23:21:04 2012 -0700
27230 altos: Add debugging code to check for stack overflow
27232 Stack overflow often happens from interrupt handlers sitting on top of
27233 a task stack. Check for this during ao_wakeup as that is often called
27234 during interrupt processing.
27236 Signed-off-by: Keith Packard <keithp@keithp.com>
27238 commit ebeac02a990da3fa6dd71487141d0bc6f78b42de
27239 Author: Keith Packard <keithp@keithp.com>
27240 Date: Tue Jun 26 23:20:17 2012 -0700
27242 altos: Enable full flight computer functionality in MegaMetrum
27244 This turns on everything that currently works
27246 Signed-off-by: Keith Packard <keithp@keithp.com>
27248 commit fb2b83fcd28199d8c686e676d46d6ecfbf706f37
27249 Author: Keith Packard <keithp@keithp.com>
27250 Date: Tue Jun 26 23:18:44 2012 -0700
27252 altos: Create a 32-bit 1MHz timer for use in profiling execution
27254 This provides a simple method for getting high-resolution timer data
27255 to use in performance tuning code. It's not used by default anywhere.
27257 Signed-off-by: Keith Packard <keithp@keithp.com>
27259 commit 097b337eb9b7deff13d5dcdafddec9bec3868b93
27260 Author: Keith Packard <keithp@keithp.com>
27261 Date: Tue Jun 26 23:17:00 2012 -0700
27263 altos: Abort radio receive when using flash memory on megametrum
27265 Radio receive camps on the SPI bus, making it impossible to access
27266 flash memory. Abort any pending receive operation when trying to get
27269 Yes, this is a total hack.
27271 Signed-off-by: Keith Packard <keithp@keithp.com>
27273 commit 1ae69a1c2ce7e45db9d9c175bc63867eff68ebe5
27274 Author: Keith Packard <keithp@keithp.com>
27275 Date: Tue Jun 26 23:15:54 2012 -0700
27277 altos: Make gcc happy with ao_telemetry_set_interval
27279 Using unsigned locals made GCC sad as it was compared with a signed value.
27281 Signed-off-by: Keith Packard <keithp@keithp.com>
27283 commit c4036bf6e7997b618f89a05dd1214c16066ba2b2
27284 Author: Keith Packard <keithp@keithp.com>
27285 Date: Tue Jun 26 23:14:13 2012 -0700
27287 altos: Turn radio-related bits of ao_flight_mm.c
27289 Now that MM has full radio functionality, we can make it work right.
27291 Signed-off-by: Keith Packard <keithp@keithp.com>
27293 commit b5f5fd92109ac6f4909a81303d52bc9220cc2520
27294 Author: Keith Packard <keithp@keithp.com>
27295 Date: Tue Jun 26 23:13:14 2012 -0700
27297 altos: custom hex printer for telemetry packets
27299 Using printf is way too slow with pdclib; just hand-write hex byte output.
27301 Signed-off-by: Keith Packard <keithp@keithp.com>
27303 commit f1ae622eff60e05c1f5d8f822a3cf6a85750c6cc
27304 Author: Keith Packard <keithp@keithp.com>
27305 Date: Tue Jun 26 23:11:10 2012 -0700
27307 altos: Optimize FEC encode and decode
27309 Integrate interleaving, CRC and padding within the decode/encode
27312 Provide for ISR priorities so that the 1120 RX interrupt takes
27313 precedence over the other interrupts or we risk losing bits.
27315 Optimize the viterbi decoder a bit (goes from 10ms per packet to 7ms
27318 Signed-off-by: Keith Packard <keithp@keithp.com>
27320 commit 936ecad62596f34773afb7460b10f63df7d0896d
27321 Author: Keith Packard <keithp@keithp.com>
27322 Date: Tue Jun 26 23:07:38 2012 -0700
27324 altos: Add GPS logging code for MegaMetrum
27326 MM uses a different logging format with larger log blocks, so
27327 restructure the GPS logging code to fill them up
27329 Signed-off-by: Keith Packard <keithp@keithp.com>
27331 commit 33f8f7add27a02d24b0671da353b59762224c1ee
27332 Author: Keith Packard <keithp@keithp.com>
27333 Date: Tue Jun 26 23:05:42 2012 -0700
27335 altos: Make cc1111 radio control functions static
27337 No need to publish these; they're all private to cc1111
27339 Signed-off-by: Keith Packard <keithp@keithp.com>
27341 commit 03dc80d15a2f8fe9d7340351226dadd8bc3cfdb9
27342 Author: Keith Packard <keithp@keithp.com>
27343 Date: Tue Jun 26 23:01:58 2012 -0700
27345 altos: Clean up usage of port parameters
27347 Make stm port parameters always be pointers; this avoids the confusion
27348 where some macros took '&port' and others took a bare 'port', and also
27349 unifies code to run on other processors in a consistent fashion.
27351 Signed-off-by: Keith Packard <keithp@keithp.com>
27353 commit f11f05c5d634de2a80c34d0d3dc93925980f52e6
27354 Author: Keith Packard <keithp@keithp.com>
27355 Date: Tue Jun 26 22:20:50 2012 -0700
27357 altosui: Make libaltos recognise new USB ids
27359 libaltos has a small range of 'AltusMetrum' products to avoid opening
27360 other devices. We've got more IDs, so open up the range.
27362 Signed-off-by: Keith Packard <keithp@keithp.com>
27364 commit 9dcb4e2ab60ecf0cc7371c1b1a620be952fa8776
27365 Author: Keith Packard <keithp@keithp.com>
27366 Date: Tue Jun 26 22:19:01 2012 -0700
27368 altosui: AltosSerial and AltosLink both tried to provide frequency setting
27370 AltosLink owns all of the device configuration, so remove that from
27371 AltosSerial and make sure that AltosLink provides the right function
27372 signatures (wasn't using the new direct frequency setting command).
27374 Signed-off-by: Keith Packard <keithp@keithp.com>
27376 commit eab18714ed9eabbcef0ff81b07427da042a58ccc
27377 Author: Keith Packard <keithp@keithp.com>
27378 Date: Tue Jun 26 22:16:44 2012 -0700
27380 altos: rename ao_viterbi.c to ao_fec_rx.c
27382 Keep it parallel with ao_fec_tx.c
27384 Signed-off-by: Keith Packard <keithp@keithp.com>
27386 commit 09761fe0f6ed40ff74317fbb47d6a74068fb4ce4
27387 Author: Keith Packard <keithp@keithp.com>
27388 Date: Mon Jun 25 06:51:36 2012 -0700
27390 altos: Incremental viterbi decode
27392 Decode radio input one interleave block at a time. This overlaps the
27393 decode computation with the packet reception, leading to lower latency
27394 in an attempt to keep up with the transmitter.
27396 Signed-off-by: Keith Packard <keithp@keithp.com>
27398 commit 628076aa90e7bc9a894646e417dd8e1fe149b60d
27399 Author: Keith Packard <keithp@keithp.com>
27400 Date: Mon Jun 25 06:38:34 2012 -0700
27402 altos: decode cc1120 received packets
27404 Call the fec decode function, compute RSSI and check CRC
27406 Signed-off-by: Keith Packard <keithp@keithp.com>
27408 commit 70cf32e89df19bde5185339fc703532c8a5b8be6
27409 Author: Keith Packard <keithp@keithp.com>
27410 Date: Mon Jun 25 05:03:34 2012 -0700
27412 altos: Get cc1120 packet reception working
27414 Interrupt-per-bit, but it seems to work
27416 Signed-off-by: Keith Packard <keithp@keithp.com>
27418 commit 246174b32bb6cf827d240c32d6a51c3513a08c37
27419 Author: Keith Packard <keithp@keithp.com>
27420 Date: Mon Jun 25 05:03:16 2012 -0700
27422 altos: Forgot ao_telemetry.h
27424 Not much builds without this...
27426 Signed-off-by: Keith Packard <keithp@keithp.com>
27428 commit b292c14790fc225029cba3f80ce8ad6c5652bc4e
27429 Author: Keith Packard <keithp@keithp.com>
27430 Date: Sat Jun 23 16:05:42 2012 -0700
27432 altos: improve FEC apis to reduce data copying
27434 Integrate interleaving and whitening into encode and decode steps.
27435 Add CRC checking function for receive.
27437 Make ao_fec_test program round-trip the data and verify correctness.
27439 Signed-off-by: Keith Packard <keithp@keithp.com>
27441 commit 74f6a1a8c8fa9d5bb8d74c99782310b431dd4727
27442 Author: Keith Packard <keithp@keithp.com>
27443 Date: Sat Jun 23 02:24:30 2012 -0700
27445 altos: Add ao_viterbi.c to megametrum build
27447 It's not used yet, just wanted to see how big the resulting object
27448 file was (492 bytes).
27450 Signed-off-by: Keith Packard <keithp@keithp.com>
27452 commit 566a0c277de01963922cabc80db8ec3a129923bd
27453 Author: Keith Packard <keithp@keithp.com>
27454 Date: Sat Jun 23 02:23:08 2012 -0700
27456 altos: fix comment about decoding last byte of FEC data
27458 There aren't *any* forward bits to use when decoding the last byte.
27460 Signed-off-by: Keith Packard <keithp@keithp.com>
27462 commit 83549f8bde42c3fddbdc817540c869dc8aefd013
27463 Author: Keith Packard <keithp@keithp.com>
27464 Date: Sat Jun 23 02:13:52 2012 -0700
27466 altos: Make ao_fec_tx_test build cleanly with -Wall
27468 Signed-off-by: Keith Packard <keithp@keithp.com>
27470 commit f7bf07dfdad260c1f219064957ef08fb480bf20f
27471 Author: Keith Packard <keithp@keithp.com>
27472 Date: Sat Jun 23 02:12:58 2012 -0700
27474 altos: optimize Viterbi implementation
27476 Minimize data usage, make data arrays static
27478 Signed-off-by: Keith Packard <keithp@keithp.com>
27480 commit ff8de3af193839de4bacfd07ade7a5f9ac0bf5b3
27481 Author: Keith Packard <keithp@keithp.com>
27482 Date: Sat Jun 23 00:54:42 2012 -0700
27484 altos: incremental viterbi decode
27486 Decode bits incrementally. Don't bother decoding the last byte; it's
27489 Signed-off-by: Keith Packard <keithp@keithp.com>
27491 commit 047e95421c87c5d056038797b48f759bedabf245
27492 Author: Keith Packard <keithp@keithp.com>
27493 Date: Fri Jun 22 23:31:11 2012 -0700
27495 altos: Start optimizing viterbi decoder
27497 Only need two cost arrays (previous and next). Create constant
27498 full-width decoder table instead of expanding bits into bytes for each
27501 Signed-off-by: Keith Packard <keithp@keithp.com>
27503 commit cbf79a0f9cb859d04e8e03d627219cb2bf49611f
27504 Author: Keith Packard <keithp@keithp.com>
27505 Date: Fri Jun 22 23:12:02 2012 -0700
27507 altos: Add the simplest possible viterbi decoder
27509 I think I understand how it works now. It's not exactly speedy, and it
27510 uses a lot of memory.
27512 Signed-off-by: Keith Packard <keithp@keithp.com>
27514 commit 75e4521ec42a368cebc67a07f8713d7a854ea265
27515 Author: Keith Packard <keithp@keithp.com>
27516 Date: Thu Jun 21 09:52:37 2012 -0700
27518 altos: Move FEC code to core
27520 It's not a driver as it's not specific to the 1120 chip
27522 Signed-off-by: Keith Packard <keithp@keithp.com>
27524 commit 0b5548d6ced67201311e1072d37fbedd3d9929c9
27525 Author: Keith Packard <keithp@keithp.com>
27526 Date: Thu Jun 21 09:51:17 2012 -0700
27528 ao-tools: Support MM telemetry packets in ao-telem
27530 Parse the new packet formats
27532 Signed-off-by: Keith Packard <keithp@keithp.com>
27534 commit 6f421818fd7062f03bfaf9e606d6a4cfdcb13b49
27535 Author: Keith Packard <keithp@keithp.com>
27536 Date: Thu Jun 21 09:50:18 2012 -0700
27538 altosui: Support MM telemetry packets
27540 Required restructuring the whole telemetry system to provide abstract
27541 interfaces to flight data.
27543 Signed-off-by: Keith Packard <keithp@keithp.com>
27545 commit ff5b0ba90e73a83360a2e8a7e9969ed2c3ce1514
27546 Author: Keith Packard <keithp@keithp.com>
27547 Date: Thu Jun 21 09:46:50 2012 -0700
27549 altos: Crank down STM SPI speed for MM
27551 The cc1120 is noisy enough to break SPI data transfers at 4MHz, so
27552 crank things down to 1MHz. It's "stable" now, but clearly needs a
27553 filter and shorter traces.
27555 Signed-off-by: Keith Packard <keithp@keithp.com>
27557 commit d2bd95edb6f77daeb1e8f043c4a239c248728e0c
27558 Author: Keith Packard <keithp@keithp.com>
27559 Date: Thu Jun 21 09:45:42 2012 -0700
27561 altos: Add full MM telemetry
27563 Create two new telemetry packets to hold all of the MM data.
27565 This patch also splits the telemetry structures out of ao.h
27567 Signed-off-by: Keith Packard <keithp@keithp.com>
27569 commit 419a801131c1034f1fa149a67850290431cbda72
27570 Author: Keith Packard <keithp@keithp.com>
27571 Date: Thu Jun 21 09:39:10 2012 -0700
27573 altos: Configure STM LCD driver for giant LCD digits
27575 These devices require static mode.
27577 Signed-off-by: Keith Packard <keithp@keithp.com>
27579 commit 611f37607fadcdc9908d67456f844a452ad4a87a
27580 Author: Keith Packard <keithp@keithp.com>
27581 Date: Sun Jun 17 19:11:35 2012 -0700
27583 altos: Make sure ao_storage_config is set before reading config block
27585 ao_storage_read does in fact call ao_storage_setup, but we need the
27586 value of ao_storage_config *before* calling ao_storage_read, so call
27587 ao_storage_setup first.
27589 Signed-off-by: Keith Packard <keithp@keithp.com>
27591 commit ae3662c56effda9f0516c7d6ffd2d5f56b859593
27592 Author: Keith Packard <keithp@keithp.com>
27593 Date: Sun Jun 17 19:06:08 2012 -0700
27595 altos: hack STM serial number to 58
27597 otherwise altosui won't record telemetry
27599 Signed-off-by: Keith Packard <keithp@keithp.com>
27601 commit 976a8375932ddb46ca3100863b0a892732c0923e
27602 Author: Keith Packard <keithp@keithp.com>
27603 Date: Sun Jun 17 19:04:53 2012 -0700
27605 altos: make cc1120 ao_radio_send re-entrant
27607 It gets called from multiple tasks, so put local data on the stack.
27609 Signed-off-by: Keith Packard <keithp@keithp.com>
27611 commit 629f43e7c7abbff33e14b168a08a4b6a9c88b937
27612 Author: Keith Packard <keithp@keithp.com>
27613 Date: Sun Jun 17 19:04:22 2012 -0700
27615 altos: Add telemetry to megametrum
27617 Now that the radio works
27619 Signed-off-by: Keith Packard <keithp@keithp.com>
27621 commit 9b24f413da0b6d989b32e8654a91c8deee4c81dd
27622 Author: Keith Packard <keithp@keithp.com>
27623 Date: Sun Jun 17 19:02:50 2012 -0700
27625 ao-tools: add rudimentary support for MM telemetry to ao-telem
27627 Just pretends they're TM packets for now
27629 Signed-off-by: Keith Packard <keithp@keithp.com>
27631 commit 4cb46b8a84a0dd5b8fcb479d7aa5157480e1bc67
27632 Author: Keith Packard <keithp@keithp.com>
27633 Date: Sun Jun 17 19:01:24 2012 -0700
27635 altosui: Add rudimentary MM support to altosui
27637 Decoded the MM sensor packets as if they were TM packets.
27639 Add class of 'altimeter' devices and match those instead of just
27640 telemetrum as appropriate.
27642 Signed-off-by: Keith Packard <keithp@keithp.com>
27644 commit 55747ce210d7d80d5b4fdaaf9dc7ee0f7bc8b0a3
27645 Author: Keith Packard <keithp@keithp.com>
27646 Date: Sun Jun 17 18:58:56 2012 -0700
27648 altosui: Move product definitions from AltosUI to AltosLib
27650 Signed-off-by: Keith Packard <keithp@keithp.com>
27652 commit e6d236fdc615625fbbf28377453f920729e49b0f
27653 Author: Keith Packard <keithp@keithp.com>
27654 Date: Sun Jun 17 16:17:00 2012 -0700
27656 altos: Software implemenation of CC1111 radio encoding
27658 Add CRC, whitening, FEC and interleaving routines for transmission
27659 path to allow cc1120 to send telem packets to cc1111.
27661 Signed-off-by: Keith Packard <keithp@keithp.com>
27663 commit 1a294852b3607947f0f86bf236785456d8719e5f
27664 Author: Keith Packard <keithp@keithp.com>
27665 Date: Sun Jun 17 16:14:33 2012 -0700
27667 altos: Be more careful about register save/restore in ao_yield
27669 Make sure the general registers are all saved before messing with any
27670 of them. Then, explicitly use r0 to save/restore apsr and primask.
27672 Signed-off-by: Keith Packard <keithp@keithp.com>
27674 commit 9d3fe2a80d0925e3eded6d738d05c5b4ea61504c
27675 Author: Keith Packard <keithp@keithp.com>
27676 Date: Sun Jun 17 16:12:18 2012 -0700
27678 altos: Don't lose IRQ disabled state in ao_sleep
27680 Using ao_arch_critical around the wchan setting will force interrupts
27681 to be re-enabled before ao_yield records the state of that bit,
27682 potentially causing problems with functions not atomically testing and
27685 Tasks that need to set wchan with interrupts disabled should have
27686 interrupts disabled when entering ao_sleep already.
27688 Signed-off-by: Keith Packard <keithp@keithp.com>
27690 commit 4e6d96816e6604ee8d9bb49345a1c1211699a655
27691 Author: Keith Packard <keithp@keithp.com>
27692 Date: Sun Jun 17 16:11:23 2012 -0700
27694 altos: ao_storage_read already calls ao_storage_setup
27696 No need to call twice.
27698 Signed-off-by: Keith Packard <keithp@keithp.com>
27700 commit ca310342d7b0bd1b78318cae38d920b8690dfd36
27701 Author: Keith Packard <keithp@keithp.com>
27702 Date: Sun Jun 17 16:09:43 2012 -0700
27704 altosui: Catch timeout errors when setting up TD telem monitoring
27706 Close the port in this case so it can be used for other things.
27708 Signed-off-by: Keith Packard <keithp@keithp.com>
27710 commit 58e005375ca29dec6091d87159055004e7f19605
27711 Author: Keith Packard <keithp@keithp.com>
27712 Date: Sun Jun 17 12:43:43 2012 -0700
27714 altos: Use interrupts to wake up after RDF transmission.
27716 Also clean up the debug output
27718 Signed-off-by: Keith Packard <keithp@keithp.com>
27720 commit 5df94f74522357e062f4ec2786ff825381b2fb10
27721 Author: Keith Packard <keithp@keithp.com>
27722 Date: Sun Jun 17 12:42:32 2012 -0700
27724 altos: Crank cc1120 power down to 0dBm to avoid crashing CPU
27726 Looks like RFI from the transmitter is confusing the CPU; lower the
27727 1120 power output from +14dBm to +0dBm to keep the CPU happy.
27729 Signed-off-by: Keith Packard <keithp@keithp.com>
27731 commit e856df474c386b8df3d2bd9e87b766ae0439efbf
27732 Author: Keith Packard <keithp@keithp.com>
27733 Date: Fri Jun 15 22:41:17 2012 -0700
27735 altos: Reduce STM SPI data rate to 4MHz
27737 cc1120 doesn't want more than 6.1MHz, otherwise it gets very angry.
27739 Signed-off-by: Keith Packard <keithp@keithp.com>
27741 commit e09e35471e788b88909ff01037fb8e0e4eabcd7d
27742 Author: Keith Packard <keithp@keithp.com>
27743 Date: Fri Jun 15 22:40:30 2012 -0700
27745 altos: Start making cc1120 radio work
27747 RDF tones and radio calibration work now.
27749 Signed-off-by: Keith Packard <keithp@keithp.com>
27751 commit c2949ea15c59215834fedac7646f50c8a09f716f
27752 Author: Keith Packard <keithp@keithp.com>
27753 Date: Fri Jun 15 22:38:37 2012 -0700
27755 altos: Fix cc1120 packet mode datarate and config
27757 Was using the wrong function
27759 Signed-off-by: Keith Packard <keithp@keithp.com>
27761 commit 1b7e4c29bf9608bfc972ae28b53cc823f4c37f92
27762 Author: Keith Packard <keithp@keithp.com>
27763 Date: Fri Jun 15 22:32:10 2012 -0700
27765 altos: Make sure cc1120 is initialized correctly at startup time
27767 Check to make sure it pulls down MISO when CS is enabled.
27769 Signed-off-by: Keith Packard <keithp@keithp.com>
27771 commit 27c95adf35e646840b9bd562497eea0dc96bb9bb
27772 Author: Keith Packard <keithp@keithp.com>
27773 Date: Fri Jun 15 22:31:36 2012 -0700
27775 altos: use 'b' command for radio beep
27777 'B' is used by the baro data dumper.
27779 Signed-off-by: Keith Packard <keithp@keithp.com>
27781 commit 93e6d0a2c0b60e7bedd34f06ba63b468dcc8e013
27782 Author: Keith Packard <keithp@keithp.com>
27783 Date: Fri Jun 15 22:30:03 2012 -0700
27785 altos: Fix RDF mode data rate and PKT_CFG0 value
27787 Changes tone to the desired 1kHz frequency and ensures the PKT_CFG0
27788 has the right value.
27790 Signed-off-by: Keith Packard <keithp@keithp.com>
27792 commit c96e60bedeb00d28c36436c12b803fd8cbadce26
27793 Author: Keith Packard <keithp@keithp.com>
27794 Date: Fri Jun 15 22:28:55 2012 -0700
27796 altos: Actually write cc1120 register values
27798 Helps to not use 'read' mode when writing.
27800 Signed-off-by: Keith Packard <keithp@keithp.com>
27802 commit 97d163c88ed8c8f64a9714018863d0b6eedab38f
27803 Author: Keith Packard <keithp@keithp.com>
27804 Date: Fri Jun 15 22:27:48 2012 -0700
27806 altos: Configure cc1120 frequency
27808 Set default conversion value, and pull the selected frequency
27809 calibration data out of the config block.
27811 Signed-off-by: Keith Packard <keithp@keithp.com>
27813 commit a5a7df405c242593cbc828d5b66bbfc141a35947
27814 Author: Keith Packard <keithp@keithp.com>
27815 Date: Fri Jun 15 22:26:06 2012 -0700
27817 Temporarily disable packet and telem on MM
27819 While work on the radio code progresses
27821 Signed-off-by: Keith Packard <keithp@keithp.com>
27823 commit baf1be1def01266512e67068948bf19b04ead6aa
27824 Author: Keith Packard <keithp@keithp.com>
27825 Date: Fri Jun 15 22:23:10 2012 -0700
27827 Allow product to override maximum number of command lists (NUM_CMDS)
27829 Just in case some product wants to save memory, or have more.
27831 Signed-off-by: Keith Packard <keithp@keithp.com>
27833 commit bfbd1d82f4c25120a97840a1bd4787680823afd8
27834 Author: Keith Packard <keithp@keithp.com>
27835 Date: Tue Jun 5 15:15:25 2012 -0700
27837 altosdroid: Add files necessary to build application
27839 Signed-off-by: Keith Packard <keithp@keithp.com>
27841 commit b8c363d9411fd5e79e3f806894dbc12bcc106b88
27842 Author: Keith Packard <keithp@keithp.com>
27843 Date: Mon Jun 4 20:56:25 2012 -0700
27845 altosui: More changes to migrate code to altoslib
27847 Signed-off-by: Keith Packard <keithp@keithp.com>
27849 commit 5634192a6036c6c7b47d224e2988e81bb71a4557
27850 Author: Keith Packard <keithp@keithp.com>
27851 Date: Mon Jun 4 20:55:33 2012 -0700
27853 altosui: attempt to get ms5607 data into .mega files was misinformed
27855 The ms5607 'p' command also means 'go into packet mode', which nicely
27856 broke attempts to communicate with teledongle
27858 Signed-off-by: Keith Packard <keithp@keithp.com>
27860 commit 705891be53e298ac6ced4ba02b87d2f6d1085b34
27861 Author: Keith Packard <keithp@keithp.com>
27862 Date: Mon Jun 4 20:54:36 2012 -0700
27864 altos: Make cc1111 products all depend on ao_arch.h and ao_arch_func.h
27866 Ensures that files get recompiled as needed
27868 Signed-off-by: Keith Packard <keithp@keithp.com>
27870 commit a9ad342ae4c34626df4f2891da4c7f6d2c14d73e
27871 Author: Keith Packard <keithp@keithp.com>
27872 Date: Mon Jun 4 20:53:53 2012 -0700
27874 altos: Other half of the ms5607 prom reporting patch
27876 Signed-off-by: Keith Packard <keithp@keithp.com>
27878 commit dec5cbee22f13c47690b0c6bf7ca724ef132fe5e
27879 Author: Keith Packard <keithp@keithp.com>
27880 Date: Mon Jun 4 20:53:06 2012 -0700
27882 altos: typo in ao_monitor prevented ground station from including code
27884 This created ground station software that couldn't actually receive
27885 and report telemetry packets.
27887 Signed-off-by: Keith Packard <keithp@keithp.com>
27889 commit e687a9bafc696998b47fd0300fbc89dece09509c
27890 Author: Keith Packard <keithp@keithp.com>
27891 Date: Mon Jun 4 20:52:38 2012 -0700
27893 altos: Make 'v' command dump pressure sensor ROM values
27895 Avoids needing a new command
27897 Signed-off-by: Keith Packard <keithp@keithp.com>
27899 commit 1832e2f76c844e97a2bd11226b003fb2af8057db
27900 Author: Keith Packard <keithp@keithp.com>
27901 Date: Mon Jun 4 20:51:35 2012 -0700
27903 altos: fix test builds of non-accel flight code
27905 Remove references to accel variables when building baro-only flight
27908 Signed-off-by: Keith Packard <keithp@keithp.com>
27910 commit 06afa2c3e78ea5bc9f1eb4913ee35c0eab0ac1bf
27911 Author: Keith Packard <keithp@keithp.com>
27912 Date: Mon Jun 4 20:50:10 2012 -0700
27914 altos: Legacy telemetry needs original ADC record
27916 The legacy telemetry packets included the raw ADC structure directly,
27917 so make sure that doesn't change further, allowing teledongle firmware
27918 to remain compatible with old TM firmware.
27920 Signed-off-by: Keith Packard <keithp@keithp.com>
27922 commit f1b14932149153a096961fff94191778f88581d9
27923 Author: Keith Packard <keithp@keithp.com>
27924 Date: Mon Jun 4 20:49:15 2012 -0700
27926 altos: Remove unused AES code from teledongle and tidongle
27928 Leave this out as neither of these products need it.
27930 Signed-off-by: Keith Packard <keithp@keithp.com>
27932 commit 718a8affe1df98eacfd707b5c8c34f9456dcff14
27933 Author: Keith Packard <keithp@keithp.com>
27934 Date: Mon Jun 4 20:47:14 2012 -0700
27936 altos: Remove accel_ref from pre v1.1 TM firmware
27938 V1.0 needs RAM space for flash buffer, leaving too little room for
27941 Signed-off-by: Keith Packard <keithp@keithp.com>
27943 commit 7a19d6790a9800f925c8de24aac71796351e2c04
27944 Author: Keith Packard <keithp@keithp.com>
27945 Date: Mon Jun 4 19:28:58 2012 -0700
27947 altos: More cleanups for moving files to altoslib
27949 Signed-off-by: Keith Packard <keithp@keithp.com>
27951 commit f86dac643081987c8994ab57a96640d5e91b342a
27952 Author: Keith Packard <keithp@keithp.com>
27953 Date: Sat Jun 2 19:59:40 2012 -0700
27955 altoslib: Clean up random rebase failures
27957 Signed-off-by: Keith Packard <keithp@keithp.com>
27959 commit dd43a2ae7594f062a8980d1756a07488ee54b447
27960 Author: Keith Packard <keithp@keithp.com>
27961 Date: Sat Jun 2 19:42:47 2012 -0700
27963 altoslib: Move new sensor library code into altoslib
27965 Signed-off-by: Keith Packard <keithp@keithp.com>
27967 commit 0772020c969a69c3b0a705de7362340a9732daab
27968 Author: Keith Packard <keithp@keithp.com>
27969 Date: Fri Mar 16 20:27:45 2012 -0700
27973 commit e81163ed875dc93a618baf9278f43ed7dd0f730e
27974 Author: Mike Beattie <mike@ethernal.org>
27975 Date: Thu Feb 23 16:43:04 2012 +1300
27977 Add local.properties to .gitignore
27979 Signed-off-by: Mike Beattie <mike@ethernal.org>
27981 commit 392c878000e9909d37dae6342df3d6cb8f217a1b
27982 Author: Mike Beattie <mike@ethernal.org>
27983 Date: Thu Feb 23 16:41:26 2012 +1300
27985 Add TelemetryService.java and associated files
27987 Signed-off-by: Mike Beattie <mike@ethernal.org>
27989 commit 69e6df07976a56b49e07c242cd6e5b2cbd2a578d
27990 Author: Keith Packard <keithp@keithp.com>
27991 Date: Thu Feb 23 17:00:48 2012 +1300
27993 Move altoslib sources to top dir
27995 No sense having them live deep in the file system.
27997 Signed-off-by: Keith Packard <keithp@keithp.com>
27999 commit 9b659904109f992b8a3e61efb94e81cdb19af1c9
28000 Author: Keith Packard <keithp@keithp.com>
28001 Date: Thu Feb 23 16:37:24 2012 +1300
28003 Demonstrate using AltosLib from altosdroid
28005 Get things hooked up so that we can use AltosLib functions from the
28006 android application; it's a bit of a hack at present, but appears to
28007 work. Some more 'official' technique would be nice...
28009 Signed-off-by: Keith Packard <keithp@keithp.com>
28011 commit a018724e40f2a4c0bae8b3d5c77bb90328ad4314
28012 Author: Keith Packard <keithp@keithp.com>
28013 Date: Thu Feb 23 11:15:23 2012 +1300
28015 Ignore generated altoslib files
28017 Signed-off-by: Keith Packard <keithp@keithp.com>
28019 commit 025eb09b5de9b50de143da9f36bc02818e018ba9
28020 Author: Keith Packard <keithp@keithp.com>
28021 Date: Wed Feb 22 23:39:01 2012 +1300
28023 Build Android local.properties from local.properties.in
28025 Make sure the SDK path is set correctly
28027 Signed-off-by: Keith Packard <keithp@keithp.com>
28029 commit 3a80545d4ecedc4b98a9ee8296ab6abbbf64312d
28030 Author: Mike Beattie <mike@ethernal.org>
28031 Date: Wed Feb 22 23:40:25 2012 +1300
28033 Add $HOME/android as an SDK location
28035 Signed-off-by: Mike Beattie <mike@ethernal.org>
28037 commit 091affece185dcd0832a55b0befeacaa182a57bb
28038 Author: Keith Packard <keithp@keithp.com>
28039 Date: Fri Jan 13 10:40:30 2012 -0800
28041 doc: Add companion SPI message protocol doc
28043 Signed-off-by: Keith Packard <keithp@keithp.com>
28045 commit bb5b5312a0c6102b12f3d4710ef213f0f6c67412
28046 Author: Keith Packard <keithp@keithp.com>
28047 Date: Sat Jan 7 20:56:49 2012 -0800
28049 altosui: Clean up a few 'fat' build rules
28051 Signed-off-by: Keith Packard <keithp@keithp.com>
28053 commit fc86ae58c3a296730fa99010cc27b8b3c2c3b780
28054 Author: Keith Packard <keithp@keithp.com>
28055 Date: Thu Jan 5 16:30:41 2012 -0800
28057 Add altosdroid/Makefile.am
28059 commit dfa059b22bf15de3f25328aeef4fdb8e5ca664dc
28060 Author: Mike Beattie <mike@ethernal.org>
28061 Date: Wed Jan 4 21:01:44 2012 -0800
28063 Add AltusMetrum Logo as app icon, and change app name
28065 Signed-off-by: Mike Beattie <mike@ethernal.org>
28066 Signed-off-by: Keith Packard <keithp@keithp.com>
28068 commit 402f1e76909229fc0c3b54743ba577b657495faf
28069 Author: Keith Packard <keithp@keithp.com>
28070 Date: Wed Jan 4 20:54:40 2012 -0800
28072 altosdroid: build android bits when possible
28074 Locate android sdk automatically
28076 Signed-off-by: Keith Packard <keithp@keithp.com>
28078 commit a48e4d40729e736929632ec422fd189ecdfba33b
28079 Author: Keith Packard <keithp@keithp.com>
28080 Date: Wed Jan 4 20:33:06 2012 -0800
28082 altosdroid: import code from mjb
28084 Signed-off-by: Keith Packard <keithp@keithp.com>
28086 commit 81465a20049da40cd8d3cda920d6585ffe87bfe3
28087 Author: Keith Packard <keithp@keithp.com>
28088 Date: Wed Jan 4 20:28:42 2012 -0800
28090 altosui: Move java altoslib to top level
28092 This will be shared with other (android) java code.
28094 Signed-off-by: Keith Packard <keithp@keithp.com>
28096 commit d6df16525927d8096d1c0cccf4c86bf4c6599d53
28097 Author: Keith Packard <keithp@keithp.com>
28098 Date: Mon Jan 2 22:43:48 2012 -0800
28100 Add altoslib/.gitignore
28102 commit 02b53b7f592b78b2fec4f4a17b6b3e114d2bf3c5
28103 Author: Keith Packard <keithp@keithp.com>
28104 Date: Mon Jan 2 22:42:18 2012 -0800
28106 altosui: Fix AltosTelemetryReader move
28108 Lost the provided link value causing a crash.
28110 Signed-off-by: Keith Packard <keithp@keithp.com>
28112 commit 9fb15d397890c7e78bf3c1438f142f62bfc2bd35
28113 Author: Keith Packard <keithp@keithp.com>
28114 Date: Mon Jan 2 22:41:48 2012 -0800
28116 altosui: Remove unused files
28118 Left around from development, these aren't useful.
28120 Signed-off-by: Keith Packard <keithp@keithp.com>
28122 commit 5270a0f1416baef5fde08547c6c98d97f973ae95
28123 Author: Keith Packard <keithp@keithp.com>
28124 Date: Mon Jan 2 22:35:41 2012 -0800
28126 altosui: Move telemetry reader &c to altoslib
28128 Move all of the device and file reading code into altoslib
28130 Signed-off-by: Keith Packard <keithp@keithp.com>
28132 commit 93305717ac4c993c88d9144d797ca64d26db97c5
28133 Author: Keith Packard <keithp@keithp.com>
28134 Date: Mon Jan 2 22:13:38 2012 -0800
28136 altosui: Move AltosState.java to altoslib
28138 Signed-off-by: Keith Packard <keithp@keithp.com>
28140 commit a5ac5c37ea385e3a2b2703c6f125b4e3b55e867a
28141 Author: Keith Packard <keithp@keithp.com>
28142 Date: Mon Jan 2 22:05:47 2012 -0800
28144 altosui: Pull most of AltosSerial into AltosLink
28146 Share basic command processing across java users
28148 Signed-off-by: Keith Packard <keithp@keithp.com>
28150 commit 18914b9a84bbd8c4364a1568bb07dcc2b04ad7ba
28151 Author: Keith Packard <keithp@keithp.com>
28152 Date: Mon Jan 2 21:12:45 2012 -0800
28154 altosui: Move AltosGreatCircle.java to altoslib
28156 Signed-off-by: Keith Packard <keithp@keithp.com>
28158 commit 027863b737190bccc3b5cd032d77587396d0c5c4
28159 Author: Keith Packard <keithp@keithp.com>
28160 Date: Mon Jan 2 21:08:34 2012 -0800
28162 altosui: Move AltosEepromTeleScience.java to altoslib
28164 Signed-off-by: Keith Packard <keithp@keithp.com>
28166 commit 346df410f570a67cda057550a067fa2b451b785d
28167 Author: Keith Packard <keithp@keithp.com>
28168 Date: Mon Jan 2 21:05:02 2012 -0800
28170 altosui: Move more eeprom stuff to altoslib
28172 Signed-off-by: Keith Packard <keithp@keithp.com>
28174 commit a4ccdd253a9873c16f194a63a79f0c26feaafa29
28175 Author: Keith Packard <keithp@keithp.com>
28176 Date: Mon Jan 2 20:57:57 2012 -0800
28178 altosui: Move eeprom managment code to library
28180 Signed-off-by: Keith Packard <keithp@keithp.com>
28182 commit 89aa06cfdcb02de1894ccb01aed97782f9eec9b2
28183 Author: Keith Packard <keithp@keithp.com>
28184 Date: Mon Jan 2 20:47:16 2012 -0800
28186 altosui: Move AltosEepromChunk.java to lib
28188 Also fixes install issues with split lib
28190 Signed-off-by: Keith Packard <keithp@keithp.com>
28192 commit b273b8b298540b1a6d0a87b1cf61df1fbf62e013
28193 Author: Keith Packard <keithp@keithp.com>
28194 Date: Mon Jan 2 20:39:16 2012 -0800
28196 altosui: Finish moving AltosConfigData to altoslib
28198 Signed-off-by: Keith Packard <keithp@keithp.com>
28200 commit 4c88b0ca96758b663c82395e63b338043d1c1a10
28201 Author: Keith Packard <keithp@keithp.com>
28202 Date: Mon Jan 2 20:34:38 2012 -0800
28204 altosui: Move AltosConfigData.java to library
28206 Create a new 'AltosLink' which exposes how to talk to the remote
28207 device abstractly via 'get_reply' and 'printf' methods.
28209 Signed-off-by: Keith Packard <keithp@keithp.com>
28211 commit ead8f1cfca2c454d18dce56479899f2b423d8bdd
28212 Author: Keith Packard <keithp@keithp.com>
28213 Date: Mon Jan 2 20:32:35 2012 -0800
28215 altosui: Add back in the split-out Altos constants as AltosLib
28217 These were pulled out of Altos.java, but not added back to git
28219 Signed-off-by: Keith Packard <keithp@keithp.com>
28221 commit 3c2f601139d36761de6a8a2210545d082ef16133
28222 Author: Keith Packard <keithp@keithp.com>
28223 Date: Mon Jan 2 17:26:59 2012 -0800
28225 altosui: Complete split out of separate java library
28227 Signed-off-by: Keith Packard <keithp@keithp.com>
28229 commit 40ee170753f4fd422c848e34a8da104683b7c8a2
28230 Author: Keith Packard <keithp@keithp.com>
28231 Date: Mon Jan 2 16:16:51 2012 -0800
28233 altosui: Clean swing/awt bits out of altoslib
28235 Signed-off-by: Keith Packard <keithp@keithp.com>
28237 commit 71636c1ed7cbe075921391605d1ac4edaa6ee52b
28238 Author: Keith Packard <keithp@keithp.com>
28239 Date: Mon Jan 2 16:13:46 2012 -0800
28243 commit 6510e8495fc5e8057b6092963def4d78978625a0
28244 Author: Keith Packard <keithp@keithp.com>
28245 Date: Mon Jan 2 16:09:29 2012 -0800
28247 altosui: Split out lots of the altosui code to a shared library
28249 To be shared with the Android application eventually
28251 Signed-off-by: Keith Packard <keithp@keithp.com>
28253 commit 97663f922e236f4ee7bd08277ca80d419b5cd10f
28254 Author: Keith Packard <keithp@keithp.com>
28255 Date: Mon Jan 2 15:45:14 2012 -0800
28257 altosui: Split out UI-specific preferences
28259 Prepare to create library shared with android application.
28261 Signed-off-by: Keith Packard <keithp@keithp.com>
28263 commit c9e52287751867d9e451146ccde78109609d30d7
28264 Author: Keith Packard <keithp@keithp.com>
28265 Date: Sat Jun 2 19:06:08 2012 -0700
28267 altosui: Fixed width format for new IMU values.
28269 Signed-off-by: Keith Packard <keithp@keithp.com>
28271 commit 9aa7993ee31bdfd6890ad7262a0375c07464ee76
28272 Author: Keith Packard <keithp@keithp.com>
28273 Date: Sat Jun 2 17:09:00 2012 -0700
28275 altos: Intgrate hmc5883 sensor into adc ring
28277 Creates a task to poll the mag sensor and place the data into the
28280 Signed-off-by: Keith Packard <keithp@keithp.com>
28282 commit 69a8907ecbb7ca0e8526aeea0dc7490a191a0f8b
28283 Author: Keith Packard <keithp@keithp.com>
28284 Date: Sat Jun 2 16:57:22 2012 -0700
28286 altos: Get HMC5883 driver limping along
28288 Not pushing data into the ring yet, but the chip appears to work now.
28290 Signed-off-by: Keith Packard <keithp@keithp.com>
28292 commit 97317d332f21c42860747c4ecde633bd0228ef52
28293 Author: Keith Packard <keithp@keithp.com>
28294 Date: Sat Jun 2 16:56:41 2012 -0700
28296 altos: Reset i2c controller at boot time
28298 In case it's wedged.
28300 Signed-off-by: Keith Packard <keithp@keithp.com>
28302 commit 64e2e66a5239541b15f43172655cfb3560bec79b
28303 Author: Keith Packard <keithp@keithp.com>
28304 Date: Sat Jun 2 16:54:42 2012 -0700
28306 altos: Fix broken EXTI edge mode selections. Clear pending exti on enable
28308 Make sure the edge mode registers are set according to the requested
28311 Clear any pending interrupt when enabling to avoid spurious isr call
28313 Signed-off-by: Keith Packard <keithp@keithp.com>
28315 commit 8d425ffba84ec6f632e8c0d44105de73242a86a9
28316 Author: Keith Packard <keithp@keithp.com>
28317 Date: Sat Jun 2 16:53:46 2012 -0700
28319 altos: Route correct GPIO line to interrupt controller
28321 Which GPIO a particular pin interrupt comes from is selected by the
28322 SYSCFG EXTICR registers; set these when an exti interrupt is configured.
28324 Signed-off-by: Keith Packard <keithp@keithp.com>
28326 commit 1353b277f8314fbddef81c743bd6ea229364fd18
28327 Author: Keith Packard <keithp@keithp.com>
28328 Date: Sat Jun 2 14:58:00 2012 -0700
28330 altos: Enable some debugging during flight mode on MM
28332 Until we've got the radio working, there's no way to see inside the MM
28333 state without using USB. Add a diagnostic command to dump out the
28334 internal flight state variables.
28336 Signed-off-by: Keith Packard <keithp@keithp.com>
28338 commit c04af7533bd3fd3f3260338c0753fde966131720
28339 Author: Keith Packard <keithp@keithp.com>
28340 Date: Fri Jun 1 23:07:38 2012 -0700
28342 altos: Add support for MegaAccel daughter card.
28344 Switches all acceleration computation to using the MegaAccel
28345 accelerometer to ensure support for high-g flights.
28347 MPU6000 values continue to be logged as normal
28349 Signed-off-by: Keith Packard <keithp@keithp.com>
28351 commit 1824761f5b98e92485e2dd347b1c4d043ec207e2
28352 Author: Keith Packard <keithp@keithp.com>
28353 Date: Fri Jun 1 19:51:25 2012 -0700
28355 altosui: Quick hacks to download megametrum data and convert to CSV
28357 Very little useful data crunching is done, but at least we can save
28360 Signed-off-by: Keith Packard <keithp@keithp.com>
28362 commit ab85337aa942cb73a08bd3b783771179773b9a67
28363 Author: Keith Packard <keithp@keithp.com>
28364 Date: Fri Jun 1 19:35:33 2012 -0700
28366 altos: Timers clock base depends on perhipheral bus prescalers too
28368 For some weird reason, a non-unity perhipheral bus clock scaler
28369 affects the base of the various timers; this left the 100Hz tick
28372 Signed-off-by: Keith Packard <keithp@keithp.com>
28374 commit ff4f3a56e09d595abbe32293cbdf1fe368633c49
28375 Author: Keith Packard <keithp@keithp.com>
28376 Date: Fri Jun 1 19:35:01 2012 -0700
28378 altos: megametrum has logging
28380 This makes sure the various other subsystems know about it, like the
28383 Signed-off-by: Keith Packard <keithp@keithp.com>
28385 commit 6806103bad98385c0ec122d400f981eb81c59dd3
28386 Author: Keith Packard <keithp@keithp.com>
28387 Date: Fri Jun 1 19:34:17 2012 -0700
28389 altos: add high-z accel and mag sensor to megametrum logging
28391 These nicely fill the 32-byte sensor log record
28393 Signed-off-by: Keith Packard <keithp@keithp.com>
28395 commit e5aebfe0203de9e69712fac291c8cd0d3a96a385
28396 Author: Keith Packard <keithp@keithp.com>
28397 Date: Fri Jun 1 19:33:18 2012 -0700
28399 altos: Mark full and mega logging correctly in 'v' command
28401 Make sure megametrum reports 'log format 5'.
28403 Signed-off-by: Keith Packard <keithp@keithp.com>
28405 commit 7fce3ddf5e7e92a14cefb7fcf35e4014df744987
28406 Author: Keith Packard <keithp@keithp.com>
28407 Date: Mon May 28 11:48:04 2012 -0600
28411 Signed-off-by: Keith Packard <keithp@keithp.com>
28413 commit 47bc9b2a39b7a8d3ef3fe8acc7fbf0512695e548
28414 Author: Keith Packard <keithp@keithp.com>
28415 Date: Mon May 28 11:47:28 2012 -0600
28417 altos: Clear stm i2c transfer timeout alarm
28419 Signed-off-by: Keith Packard <keithp@keithp.com>
28421 commit 8164cd95db62e4564b3a9ba5c06a74c870c03841
28422 Author: Keith Packard <keithp@keithp.com>
28423 Date: Mon May 28 11:46:51 2012 -0600
28425 altos: Remove debug printf from accel auto-cal
28427 Otherwise, this goes way too slow
28429 Signed-off-by: Keith Packard <keithp@keithp.com>
28431 commit ee61fb8ccb47f94b7c39e803f5a0248840d1eea6
28432 Author: Keith Packard <keithp@keithp.com>
28433 Date: Mon May 28 11:45:53 2012 -0600
28435 altos: Clean up ADC selection for cc1111
28437 Depend directly on product defines instead of trying to guess
28439 Signed-off-by: Keith Packard <keithp@keithp.com>
28441 commit 2df9113a22f4f67707d9ee777bd6b23ff671b105
28442 Author: Keith Packard <keithp@keithp.com>
28443 Date: Mon May 28 11:45:30 2012 -0600
28445 altos: All cc1111 products have a radio
28447 Signed-off-by: Keith Packard <keithp@keithp.com>
28449 commit a53b8b84283eb62157b0f8ecd8061f61a4b6bd6f
28450 Author: Keith Packard <keithp@keithp.com>
28451 Date: Mon May 28 11:44:45 2012 -0600
28453 altos: Shrink telemetry generation code
28455 otherwise TM doesn't build anymore
28457 Signed-off-by: Keith Packard <keithp@keithp.com>
28459 commit 43e558738c76afd72fc01660884be3158f44470d
28460 Author: Keith Packard <keithp@keithp.com>
28461 Date: Mon May 28 11:44:07 2012 -0600
28463 altos: Try to get hmc5883 working
28467 Signed-off-by: Keith Packard <keithp@keithp.com>
28469 commit 9f5e4cf7d8204016e023cf439d93de1203dc406e
28470 Author: Keith Packard <keithp@keithp.com>
28471 Date: Sun May 27 18:23:39 2012 -0600
28473 altos: Make teleterra v0.2 compile with new ao_data struct
28475 Signed-off-by: Keith Packard <keithp@keithp.com>
28477 commit 5dd5e0284c8b26b0d4ce69c64bb7864e0ae83db7
28478 Author: Keith Packard <keithp@keithp.com>
28479 Date: Sun May 27 17:45:09 2012 -0600
28481 altos: Make telepyro-v0.1 build with new ao_data struct
28483 Signed-off-by: Keith Packard <keithp@keithp.com>
28485 commit 29edf6d901432a1afc65900ff599c963edac5a2b
28486 Author: Keith Packard <keithp@keithp.com>
28487 Date: Sun May 27 17:44:01 2012 -0600
28489 altos: Make telescience-v0.1 build with new ao_data struct
28491 Signed-off-by: Keith Packard <keithp@keithp.com>
28493 commit 5fd869b244f8f2b76258dc31a5507a73fd47cf1d
28494 Author: Keith Packard <keithp@keithp.com>
28495 Date: Sun May 27 17:31:12 2012 -0600
28497 altos: Make telenano build with new ao_data structure
28499 Signed-off-by: Keith Packard <keithp@keithp.com>
28501 commit 627b904b36e129ff2ead436a626699abfc3b3211
28502 Author: Keith Packard <keithp@keithp.com>
28503 Date: Sun May 27 17:29:27 2012 -0600
28505 altos: Make stm-demo compile with new ao_data structure
28507 Signed-off-by: Keith Packard <keithp@keithp.com>
28509 commit 090dc9aecdf4cfd1ac727325ae141d441c5b28aa
28510 Author: Keith Packard <keithp@keithp.com>
28511 Date: Sun May 27 17:26:43 2012 -0600
28513 altos: Make telemini-v1.0 compile with new ao_data structure
28515 Signed-off-by: Keith Packard <keithp@keithp.com>
28517 commit 98e992b65d366d9f79d7d2dd2dd4d1886dd1d9c4
28518 Author: Keith Packard <keithp@keithp.com>
28519 Date: Sun May 27 17:25:17 2012 -0600
28521 altos: Make telemetrum-v1.0 build with new ao_data structure
28523 Signed-off-by: Keith Packard <keithp@keithp.com>
28525 commit ce8153472069ed56b24ac36f297ac569d1f767d4
28526 Author: Keith Packard <keithp@keithp.com>
28527 Date: Sun May 27 17:24:09 2012 -0600
28529 altos: Make telemetrum-v1.1 compile with new ao_data structure
28531 Signed-off-by: Keith Packard <keithp@keithp.com>
28533 commit ed635545e0b965901032ed2c3474ffe997c73de3
28534 Author: Keith Packard <keithp@keithp.com>
28535 Date: Sun May 27 16:52:45 2012 -0600
28537 ignore pa to altitude conversion file
28539 Signed-off-by: Keith Packard <keithp@keithp.com>
28541 commit dd73c9b441f7672fb9982c4caeb5178df30f5d2b
28542 Author: Keith Packard <keithp@keithp.com>
28543 Date: Sun May 27 16:47:30 2012 -0600
28545 altos: Split out mm-specific versions of sampling code
28547 Avoid breaking telemetrum (too much) by splitting this stuff apart.
28549 Signed-off-by: Keith Packard <keithp@keithp.com>
28551 commit 9eeba439ce8c9dc1def8528f96b6a67c6578d656
28552 Author: Keith Packard <keithp@keithp.com>
28553 Date: Sun May 27 16:46:00 2012 -0600
28555 altos: Don't start ADC ring until the other sensors have a valid value
28557 Yes, this is still an ugly kludge, but it's easy.
28559 Signed-off-by: Keith Packard <keithp@keithp.com>
28561 commit d01c10eff4b70af13347969a7cece8730cf1a3f1
28562 Author: Keith Packard <keithp@keithp.com>
28563 Date: Sun May 27 16:44:38 2012 -0600
28565 altos: Data packet tick count does not live in adc structure
28567 It was moved to the global structure. Having two is confusing.
28569 Signed-off-by: Keith Packard <keithp@keithp.com>
28571 commit 78423f3fc5164ea9fd428606419784c1700ad5c5
28572 Author: Keith Packard <keithp@keithp.com>
28573 Date: Fri May 25 23:18:06 2012 -0600
28575 Get megametrum ready to at least log flight data
28577 Doesn't track flight state changes correctly.
28579 Signed-off-by: Keith Packard <keithp@keithp.com>
28581 commit 0239e4dfe587528524b6380bbf6d9583047e52d6
28582 Author: Keith Packard <keithp@keithp.com>
28583 Date: Fri May 18 21:23:47 2012 -0700
28585 altos: Poll mpu6000 values every tick and stash them locally.
28587 Signed-off-by: Keith Packard <keithp@keithp.com>
28589 commit 34bb17bc1a3d8a1c95b5e57f059e7a1747e17a03
28590 Author: Keith Packard <keithp@keithp.com>
28591 Date: Fri May 18 20:16:35 2012 -0700
28593 altos: Finish ms5607 support
28595 This has the MS5607 polling once each tick for pressure and
28596 temperature and then saving that in a global variable. The command UI
28597 provides for dumping the prom data so that an eeprom file can have
28598 raw sensor data along with the conversion factors necessary to compute
28601 Signed-off-by: Keith Packard <keithp@keithp.com>
28603 commit 5d8b9d524d6424ff98dcc4155fe8b8bd892b6d8f
28604 Author: Keith Packard <keithp@keithp.com>
28605 Date: Fri May 18 20:04:57 2012 -0700
28607 altos: Add conversion between Pa and meters
28609 To be used with the MS5607 which generates data in calibrated units.
28611 Signed-off-by: Keith Packard <keithp@keithp.com>
28613 commit 1541fc0bde71f503b1ae5757497e9e1e6d023111
28614 Author: Keith Packard <keithp@keithp.com>
28615 Date: Mon May 7 23:14:57 2012 -0700
28617 altos: Check MS5607 CRC. Clean up MS5607 API
28619 It's not ready for flight yet, but at least it's sensible now.
28621 Signed-off-by: Keith Packard <keithp@keithp.com>
28623 commit 6a62edd4a1f01a6ee380c3aabaff3f437e8d6f1e
28624 Author: Keith Packard <keithp@keithp.com>
28625 Date: Mon May 7 23:14:14 2012 -0700
28627 altos: Conditional byte swapping in mpu6000 driver
28629 Only needed on LSB machines.
28631 Signed-off-by: Keith Packard <keithp@keithp.com>
28633 commit 6a973f788563ccc66b01cc7557a004dabef18d09
28634 Merge: d387f24 da2c920
28635 Author: Bdale Garbee <bdale@gag.com>
28636 Date: Wed May 16 09:13:53 2012 -0600
28638 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
28640 commit d387f246b24502642b76aad04eb3e0f1a5b78a05
28641 Author: Bdale Garbee <bdale@gag.com>
28642 Date: Wed May 16 09:09:44 2012 -0600
28644 build-dep on default-jdk instead of openjdk-6-jdk, closes: #655580
28646 commit da2c920b9f3378d5a18551e008c1da5dace1e0ef
28647 Author: Keith Packard <keithp@keithp.com>
28648 Date: Mon May 7 21:53:53 2012 -0700
28650 altosui: Try to make telem tick counts match eeprom
28652 telem files can have an extra wrap or two of tick count if they start
28653 recording a long time before the flight. Account for this so that the
28654 CSV file output from each have matching tick values.
28656 Signed-off-by: Keith Packard <keithp@keithp.com>
28658 commit b5b898264077fcada29e73efa28dcbe4729f2709
28659 Author: Keith Packard <keithp@keithp.com>
28660 Date: Mon May 7 21:53:11 2012 -0700
28662 altosui: Output recorded clock tick in CSV files
28664 This allows eeprom and telem files to be correlated accurately
28666 Signed-off-by: Keith Packard <keithp@keithp.com>
28668 commit 73c26f39b1a08fcc13e23a5b1a4293bc7df9f163
28669 Author: Keith Packard <keithp@keithp.com>
28670 Date: Mon May 7 21:52:12 2012 -0700
28672 altos: Hacking at cc1120 driver
28674 Still doesn't work, but this adds a ton more register definitions
28676 Signed-off-by: Keith Packard <keithp@keithp.com>
28678 commit 318b564486aa9965bbad54c71e51fcb32b414162
28679 Author: Keith Packard <keithp@keithp.com>
28680 Date: Mon May 7 21:51:25 2012 -0700
28682 altos: Get mpu6000 working
28684 This initializes the device appropraitely, and provides a command to
28685 dump the current values in converted form.
28687 Signed-off-by: Keith Packard <keithp@keithp.com>
28689 commit af949c67eeb9dc310b1430d3435d241adccfc0a9
28690 Author: Keith Packard <keithp@keithp.com>
28691 Date: Mon May 7 21:50:26 2012 -0700
28693 altos: stm: pass DMA buffer index to DMA completion callback
28695 This lets the user know which DMA has finished.
28697 Signed-off-by: Keith Packard <keithp@keithp.com>
28699 commit dd7699cf8daded17ac41abf5c5170cfb599b6ff5
28700 Author: Keith Packard <keithp@keithp.com>
28701 Date: Mon May 7 21:49:24 2012 -0700
28703 altos: stm: delay during USB config with pull-up off
28705 This makes sure that a reboot will reliably cause the device to
28706 disconnect from the USB bus.
28708 Signed-off-by: Keith Packard <keithp@keithp.com>
28710 commit 744d05e6037ffc11688a9faa9c7b5dcda4065ee3
28711 Author: Keith Packard <keithp@keithp.com>
28712 Date: Mon May 7 21:47:17 2012 -0700
28714 altos: stm: share i2c_stop code between send and recv
28716 This waits for the stop signal to appear on the bus, necessary before
28717 starting another transaction.
28719 Signed-off-by: Keith Packard <keithp@keithp.com>
28721 commit ddaf501ddcfc1a5f74a1ef1b6b76e1c82d89c77a
28722 Author: Keith Packard <keithp@keithp.com>
28723 Date: Sun May 6 23:54:13 2012 -0700
28725 altos: stm i2c DMA for large recv appears to work
28727 Transaction appears to be clean on the i2c bus now; correct number of
28728 bytes received, and the nack and stop at the right time. This tests >
28729 2 length reads; should try that too.
28731 Signed-off-by: Keith Packard <keithp@keithp.com>
28733 commit fad6cda3d081d438b18305611f37fe05335aa372
28734 Author: Keith Packard <keithp@keithp.com>
28735 Date: Sun May 6 22:53:25 2012 -0700
28737 altos: megametrum needs ao_mpu6000.h
28739 Signed-off-by: Keith Packard <keithp@keithp.com>
28741 commit f66f5de7a6cae71948da777ad0638bc6267a710f
28742 Author: Keith Packard <keithp@keithp.com>
28743 Date: Sun May 6 22:52:56 2012 -0700
28745 altos: Switch megametrum compile to -Os
28747 Looks like gcc has compiler bugs with -O0
28749 Signed-off-by: Keith Packard <keithp@keithp.com>
28751 commit 0f0cc91ce8e9807dca48a5c0c53d821f5060e245
28752 Author: Keith Packard <keithp@keithp.com>
28753 Date: Sun May 6 22:47:33 2012 -0700
28755 altos: STM i2c work.
28757 Start now driven by interrupts
28758 Send now done with DMA and interrupts
28760 Signed-off-by: Keith Packard <keithp@keithp.com>
28762 commit 69feb1e3d94a028d04529edb015654bafd06353b
28763 Author: Keith Packard <keithp@keithp.com>
28764 Date: Tue May 1 18:12:41 2012 -0700
28766 ao-tools: Add GPS and rssi printing to ao-telem
28768 This prints all of the basic telemetrum messages now.
28770 Signed-off-by: Keith Packard <keithp@keithp.com>
28772 commit 8b08095b3d41e21684a10bddfb54431019da5af6
28773 Author: Keith Packard <keithp@keithp.com>
28774 Date: Tue May 1 11:08:49 2012 -0700
28776 altos: Report latest telemetry data, rather than using the oldest
28778 ao_sample_adc points to the *next* ADC entry, rather than the most
28779 recent one. Step back one entry to get the latest valid data.
28781 Signed-off-by: Keith Packard <keithp@keithp.com>
28783 commit 7b0b6bcc40891d8dd106d091d3af8107b2941c66
28784 Author: Keith Packard <keithp@keithp.com>
28785 Date: Wed Apr 25 23:29:20 2012 -0700
28787 altos: Add hmc5883 and mpu6000 drivers to megametrum build
28789 Signed-off-by: Keith Packard <keithp@keithp.com>
28791 commit e0b8c614ec4d11f432963e48d94e4497d31a9ddc
28792 Author: Keith Packard <keithp@keithp.com>
28793 Date: Wed Apr 25 23:27:58 2012 -0700
28795 altos: Add mpu6000 and hmc5883 stubs
28797 No real drivers here yet, just some testing stubs
28799 Signed-off-by: Keith Packard <keithp@keithp.com>
28801 commit 0266e08dbf19e2204fb5f758d5d0f944d2afff7d
28802 Author: Keith Packard <keithp@keithp.com>
28803 Date: Wed Apr 25 23:26:57 2012 -0700
28805 altos: Add STM I2C recv and stop funcs
28807 Recv doesn't appear to work with more than one byte
28809 Signed-off-by: Keith Packard <keithp@keithp.com>
28811 commit 962476911aaab17fd482593a0e8b95fe47de2f29
28812 Author: Keith Packard <keithp@keithp.com>
28813 Date: Wed Apr 25 23:25:43 2012 -0700
28815 altos: Oopsed the STM DMA channels for I2C1
28819 Signed-off-by: Keith Packard <keithp@keithp.com>
28821 commit 5f55d0490017faa19b8d70b1742e4a45266c7e79
28822 Author: Keith Packard <keithp@keithp.com>
28823 Date: Fri Apr 20 22:26:16 2012 -0500
28825 altosui: Mac OS Lion Java default heap space is too small (Trac #37)
28827 Increase it to 512M in the Info.plist file.
28829 Signed-off-by: Keith Packard <keithp@keithp.com>
28831 commit 1489263b895a2a825e29d0560c9b1dbba8a3f431
28832 Author: Keith Packard <keithp@keithp.com>
28833 Date: Tue Apr 17 11:01:18 2012 -0700
28835 altos: Starting to write cc1120 driver
28837 This does "something" in radio test mode, appearing to generate a
28840 Signed-off-by: Keith Packard <keithp@keithp.com>
28842 commit cc305ea231ae22278abf91c0d9925f5992945369
28843 Author: Keith Packard <keithp@keithp.com>
28844 Date: Sat Apr 14 13:53:36 2012 -0700
28846 altosui: Add apogee lockout configuration
28848 Provide suggested values of 5/10/15/20 seconds.
28850 Signed-off-by: Keith Packard <keithp@keithp.com>
28852 commit b4ab9f5dfa9f2a50e0528acf0a1fdeaa1f9bc523
28853 Author: Keith Packard <keithp@keithp.com>
28854 Date: Sat Apr 14 13:52:37 2012 -0700
28856 altosui: Read frequency from device while configuring ground station
28858 Missed this when adding the TD config UI.
28860 Signed-off-by: Keith Packard <keithp@keithp.com>
28862 commit 5c8af6d35ebfc8fd896dfbf9928ec8f9dbfa531f
28863 Author: Keith Packard <keithp@keithp.com>
28864 Date: Sat Apr 14 12:05:28 2012 -0700
28866 altos: Remove debug printf from cc1111 check-stack script
28868 Signed-off-by: Keith Packard <keithp@keithp.com>
28870 commit 6cb744e305116a738b5d71686c6748f6f08c12ea
28871 Author: Keith Packard <keithp@keithp.com>
28872 Date: Sat Apr 14 12:02:14 2012 -0700
28874 altos: Respect apogee lockout time in flight algorithm
28876 This prevents any apogee detection from occurring until the specified
28877 number of seconds after boost. This also prevents the switch from
28878 accel+baro to baro only mode in the Kalman filter.
28880 The test frame work is also changed to look for Apogee lockout: in the
28883 Signed-off-by: Keith Packard <keithp@keithp.com>
28885 commit 9a8fec1b6d8f3346f988882ffb03d7d0e45b3c81
28886 Author: Keith Packard <keithp@keithp.com>
28887 Date: Sat Apr 14 12:00:32 2012 -0700
28889 altos: Clean up test scripts
28891 The flight test scripts were using invalid bash syntax. Clean that up
28892 and also switch the default flight directory to my new
28893 ~/misc/rockets/flights directory.
28895 Signed-off-by: Keith Packard <keithp@keithp.com>
28897 commit e9f6fca7cfe796cbd86ae9d8f1ebe31bba7251db
28898 Author: Keith Packard <keithp@keithp.com>
28899 Date: Fri Apr 13 18:38:29 2012 -0700
28901 altos: Correct STM USB driver
28903 Configure endpoint registers correctly now.
28904 Restructure code to make sure we send the right IN packets.
28906 Signed-off-by: Keith Packard <keithp@keithp.com>
28908 commit 1a84d34fa08f43a5f79b1a5f8d8de7674d04647d
28909 Author: Keith Packard <keithp@keithp.com>
28910 Date: Fri Apr 13 18:35:46 2012 -0700
28912 altos: Check all USE_SERIAL_*_STDIO when computing AO_NUM_STDIOS
28914 AO_NUM_STDIOS is allocated based on the total number of possible stdio
28915 values. Now that multiple serial stdio are possible, make sure to
28918 Signed-off-by: Keith Packard <keithp@keithp.com>
28920 commit 3c67543f3e5fddc6a8850f33ac519ccd55b607f0
28921 Author: Keith Packard <keithp@keithp.com>
28922 Date: Fri Apr 13 18:34:52 2012 -0700
28924 altos: Set USB Interrupt endpoint interval to maximum allowed
28926 We don't ever send anything over this channel, so there's no sense
28927 asking the host to poll it very often.
28929 Signed-off-by: Keith Packard <keithp@keithp.com>
28931 commit 0667261e03b3fd403e97d02ea6204b007bb13f58
28932 Author: Keith Packard <keithp@keithp.com>
28933 Date: Fri Apr 13 09:39:20 2012 -0700
28935 altos: Pull more interfaces out of ao.h and move to separate files
28937 This moves the aes, btm, companion, lcd and packet interfaces out of ao.h
28939 Signed-off-by: Keith Packard <keithp@keithp.com>
28941 commit 2b4a53342980618b193cbee5b803e56f7c937893
28942 Author: Keith Packard <keithp@keithp.com>
28943 Date: Fri Apr 13 09:36:00 2012 -0700
28945 altos: ao_telelaunch.c got left in src directory
28947 Should live in product/ao_telelaunch.c
28949 Signed-off-by: Keith Packard <keithp@keithp.com>
28951 commit 040a6eb119451026e1ec7c3a6a8e76b439c632d5
28952 Author: Keith Packard <keithp@keithp.com>
28953 Date: Thu Apr 12 14:51:07 2012 -0700
28955 altos: Massive product config cleanup
28957 Support multiple serial ports more cleanly
28959 Split out parts of ao.h into separate feature header files
28961 Signed-off-by: Keith Packard <keithp@keithp.com>
28963 commit f952f9c285e2718a433c8c720c9b5d9c369e7036
28964 Author: Keith Packard <keithp@keithp.com>
28965 Date: Thu Apr 12 14:50:12 2012 -0700
28967 altos: Start adding apogee lockout support
28969 Remove radio channel support too.
28971 Signed-off-by: Keith Packard <keithp@keithp.com>
28973 commit 6d1606895f70c6bca20c25084107f90bd0b613ec
28974 Author: Keith Packard <keithp@keithp.com>
28975 Date: Wed Apr 11 23:31:28 2012 -0700
28977 altos: Switch stm-demo to HSE clock, add USB
28979 Requires that SB17 be soldered shut so that the MCO from the STlink
28980 CPU is available the target for HSE input.
28982 Signed-off-by: Keith Packard <keithp@keithp.com>
28984 commit 49ac2828510e8b5fcba7e31631dac0580a455011
28985 Author: Keith Packard <keithp@keithp.com>
28986 Date: Wed Apr 11 23:30:13 2012 -0700
28988 altos: Rework how STM clocks are initialized.
28990 Clean all of the RCC configuration up after turning on the clocks.
28991 Use the MSI clock during initialization to avoid messing around with
28992 the HSI clock temporarily.
28994 Allow for an external clock on the HSE line.
28996 Signed-off-by: Keith Packard <keithp@keithp.com>
28998 commit 93ef7e4a23d13540615f1a9782e1d58ddb7f258e
28999 Author: Keith Packard <keithp@keithp.com>
29000 Date: Wed Apr 11 23:29:38 2012 -0700
29002 altos: Use new USB driver in megametrum-v0.1 product
29004 Signed-off-by: Keith Packard <keithp@keithp.com>
29006 commit d432307a3c2709634350eaa1262b935028d073d3
29007 Author: Keith Packard <keithp@keithp.com>
29008 Date: Wed Apr 11 23:28:45 2012 -0700
29010 altos: Add STM USB driver
29012 Emulates the usual CDC-ACM device
29014 Signed-off-by: Keith Packard <keithp@keithp.com>
29016 commit afd52a8b54fe31577d939a161ea9cf5ad48e3a43
29017 Author: Keith Packard <keithp@keithp.com>
29018 Date: Wed Apr 11 23:26:30 2012 -0700
29020 altos: Add STM ao_arch_reboot implementation
29022 Uses the AIRCR register to force a reset
29024 Signed-off-by: Keith Packard <keithp@keithp.com>
29026 commit 150881f86f8d90b5867507889441990d18223e62
29027 Author: Keith Packard <keithp@keithp.com>
29028 Date: Wed Apr 11 23:25:36 2012 -0700
29030 altos: Add register definitions for STM syscfg and usb
29032 Signed-off-by: Keith Packard <keithp@keithp.com>
29034 commit 0dd9e1dd62656a931f9559af6da9131f704f83f9
29035 Author: Keith Packard <keithp@keithp.com>
29036 Date: Mon Apr 9 23:27:43 2012 -0700
29038 altos: Add support for multiple SPI busses and sharing device drivers
29040 The STM32L151 has several SPI busses, and we want to use more than
29041 one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting
29042 time on AVR and CC1111 processors which only use one SPI bus, elide
29043 those parameters from the actual functions by wrapping them with
29046 Configuring chip select is now all macroized so that each chip can
29047 have its own version, allowing the STM to share the various SPI device
29048 drivers with the cc1111 and avr processors. Note that only the M25
29049 driver has been ported; porting the others is 'trivial', but not
29050 necessary at this point.
29052 Signed-off-by: Keith Packard <keithp@keithp.com>
29054 commit 35e3c47da895bdd868b9b66b98bca64bd82db862
29055 Author: Keith Packard <keithp@keithp.com>
29056 Date: Mon Apr 9 22:25:59 2012 -0700
29058 altos: make megametrum beeper test keep beeping
29060 Used to measure the beep frequency.
29062 Signed-off-by: Keith Packard <keithp@keithp.com>
29064 commit 9804528e249db256e020d4b5340ba6216d3474f0
29065 Author: Keith Packard <keithp@keithp.com>
29066 Date: Mon Apr 9 22:25:13 2012 -0700
29068 altos: Check for cc1111 flash overflow
29070 The linker is supposed to do this, but it ignores the static
29071 initializer data added after the code.
29073 Signed-off-by: Keith Packard <keithp@keithp.com>
29075 commit d15c4976ed9c23c861e620eb9c429d1cb7eedbee
29076 Author: Keith Packard <keithp@keithp.com>
29077 Date: Mon Apr 9 22:24:36 2012 -0700
29079 altos: Increase STM SPI speed to PCLK/4
29081 The pressure sensor seems happy at this speed.
29083 Signed-off-by: Keith Packard <keithp@keithp.com>
29085 commit 0cd682ef0c8cdcf364b7e173ff3a9f84e485c113
29086 Author: Keith Packard <keithp@keithp.com>
29087 Date: Mon Apr 9 22:23:52 2012 -0700
29089 altos: Move MS5607 configuration to ao_pins.h
29091 Which SPI port and where chip select is to be found are product specific.
29093 Signed-off-by: Keith Packard <keithp@keithp.com>
29095 commit 3909fca0a3f918121888a415f9bf9bca99505366
29096 Author: Keith Packard <keithp@keithp.com>
29097 Date: Mon Apr 9 22:22:58 2012 -0700
29099 altos: Add missing parens in ao_ms5607.h
29101 Signed-off-by: Keith Packard <keithp@keithp.com>
29103 commit c5bbfc7244faaae41c7b581644c3c253e9b7f462
29104 Author: Keith Packard <keithp@keithp.com>
29105 Date: Mon Apr 9 22:21:46 2012 -0700
29107 altos: Reduce MS5607 reset delay, increase conversion delay
29109 Reset doesn't take very long, while doing a conversion seems to take
29112 Signed-off-by: Keith Packard <keithp@keithp.com>
29114 commit 51aef5d4fc29986353ad887f4a67ed2fe35f8c8e
29115 Author: Keith Packard <keithp@keithp.com>
29116 Date: Mon Apr 9 22:17:33 2012 -0700
29118 altos: Make STM clock configuration per-product. Fix 32MHz CPU speed
29120 This moves all of the STM clock configuration into ao_pins.h so that
29121 each product can configure it separately. While doing this, I
29122 discovered that the flash memory mode (64-bit, prefetch, latency 1)
29123 wasn't actually getting set, which is why the CPU refused to work at
29126 Signed-off-by: Keith Packard <keithp@keithp.com>
29128 commit 1dcfbb05531767e67df45c2799a2fe533834fb71
29129 Author: Keith Packard <keithp@keithp.com>
29130 Date: Mon Apr 9 20:28:19 2012 -0700
29132 altos: Add beeper driver to STM arch
29134 Drives the MegaMetrum beeper
29136 Signed-off-by: Keith Packard <keithp@keithp.com>
29138 commit 67044cca5b463772491d0712d0ce07a8f897a476
29139 Author: Keith Packard <keithp@keithp.com>
29140 Date: Mon Apr 9 00:10:43 2012 -0700
29142 altos: Test I2C code on discovery board.
29144 Signed-off-by: Keith Packard <keithp@keithp.com>
29146 commit 0a198dfcd1b0defe194feaf301f4586e5573d6e9
29147 Author: Keith Packard <keithp@keithp.com>
29148 Date: Mon Apr 9 00:10:01 2012 -0700
29150 altos: ARM -O0 flag appears to generate buggy code
29152 Use -Os always, which is annoying...
29154 Signed-off-by: Keith Packard <keithp@keithp.com>
29156 commit 597c3df668ccf656d8c014f665c154a03166577c
29157 Author: Keith Packard <keithp@keithp.com>
29158 Date: Mon Apr 9 00:09:18 2012 -0700
29160 altos: Make ms5607 driver do something
29162 It's loading prom values and converting sensor data, but it's getting
29163 the wrong answer at present.
29165 Signed-off-by: Keith Packard <keithp@keithp.com>
29167 commit e9362841b1075a2ae59eecc73137b20e700567a8
29168 Author: Keith Packard <keithp@keithp.com>
29169 Date: Mon Apr 9 00:08:20 2012 -0700
29171 altos: add STM I2C driver.
29173 Not well tested yet...
29175 Signed-off-by: Keith Packard <keithp@keithp.com>
29177 commit e027247a9ef82746c26bcb8d0a851a0fa06511de
29178 Author: Keith Packard <keithp@keithp.com>
29179 Date: Mon Apr 9 00:06:35 2012 -0700
29181 altos: Slow STM SPI down a bit so the MS5607 returns values
29183 It's still not working right, but at least it returns something other
29186 Signed-off-by: Keith Packard <keithp@keithp.com>
29188 commit 059f09dbca4703c25b42389b54c6510331c39485
29189 Author: Keith Packard <keithp@keithp.com>
29190 Date: Mon Apr 9 00:05:18 2012 -0700
29192 altos: Allow STM DMA channels to be reserved for one use
29194 This allows a single user of a DMA channel to reserve it for use
29195 without needing to lock the mutex; this is required for DMA from the
29196 ADC to work on megametrum as it wants to start DMA from an interrupt
29197 handler, which cannot block on a mutex.
29199 Signed-off-by: Keith Packard <keithp@keithp.com>
29201 commit f7cfbbce2b94b5ac0094a0e34e1766fe1ceb12c8
29202 Author: Keith Packard <keithp@keithp.com>
29203 Date: Sat Apr 7 20:35:17 2012 -0700
29205 altos: Show temperature in stm-demo
29207 Use the ADC to show current temperature
29209 Signed-off-by: Keith Packard <keithp@keithp.com>
29211 commit 98aa481741b8fbc617545beda3d295b53de90716
29212 Author: Keith Packard <keithp@keithp.com>
29213 Date: Sat Apr 7 20:33:27 2012 -0700
29215 altos: Use 384 cycle ADC sample time
29217 This is plenty fast, and provides nice stable readings.
29219 Signed-off-by: Keith Packard <keithp@keithp.com>
29221 commit 0bce68e6a0abc19f49c573331164d13643c9bee5
29222 Author: Keith Packard <keithp@keithp.com>
29223 Date: Sat Apr 7 20:31:58 2012 -0700
29225 altos: Add STM temperature sensor calibration data
29227 Each stm32l has two-point factory temperature calibration data.
29228 Provide access to that for displaying temperature data.
29230 Signed-off-by: Keith Packard <keithp@keithp.com>
29232 commit a41628c97e90770890cce1d6f580e92c1cad1a7f
29233 Author: Keith Packard <keithp@keithp.com>
29234 Date: Sat Apr 7 18:55:53 2012 -0700
29236 altos: Add ADC support to megametrum firmware
29238 Measures all MM igniter and battery voltages.
29240 Signed-off-by: Keith Packard <keithp@keithp.com>
29242 commit 9b9357f48597a034211affb3f18fc6089816456d
29243 Author: Keith Packard <keithp@keithp.com>
29244 Date: Sat Apr 7 18:55:20 2012 -0700
29246 altos: Add ADC tests to stm-demo
29248 Signed-off-by: Keith Packard <keithp@keithp.com>
29250 commit b5e9d14b4e3e8f29ad8a7bb9b339890be4bcfa2f
29251 Author: Keith Packard <keithp@keithp.com>
29252 Date: Sat Apr 7 18:54:32 2012 -0700
29254 altos: STM SPI is not using interrupts itself
29256 All SPI transfers are done via DMA, so the DMA interrupts suffice.
29258 Signed-off-by: Keith Packard <keithp@keithp.com>
29260 commit 5e41d1e03680af9806c599aad80b9b64dd719f9b
29261 Author: Keith Packard <keithp@keithp.com>
29262 Date: Sat Apr 7 18:53:12 2012 -0700
29264 altos: Add support for STM ADC
29266 DMA-based driver for the STM analog to digital converter.
29268 Signed-off-by: Keith Packard <keithp@keithp.com>
29270 commit fa96ee3db9b57cc2a88e9edd74bb9efcc228ccf3
29271 Author: Keith Packard <keithp@keithp.com>
29272 Date: Sat Apr 7 18:44:11 2012 -0700
29274 altosui: remove debug printf from AltosFlightStats
29276 Signed-off-by: Keith Packard <keithp@keithp.com>
29278 commit e56038b65ba1c6413ba9942be3c092644986f126
29279 Author: Keith Packard <keithp@keithp.com>
29280 Date: Sat Apr 7 18:36:36 2012 -0700
29282 altosui: When computing flight stats, auto-detect boost time
29284 Detect when boost actually starts by looking for the last low
29285 acceleration value before the recorded boost time. This improves the
29286 computation of the boost state data.
29288 Signed-off-by: Keith Packard <keithp@keithp.com>
29290 commit 20066268d8d1853055d0afe108584db34b425fcb
29291 Author: Keith Packard <keithp@keithp.com>
29292 Date: Sat Apr 7 18:35:26 2012 -0700
29294 altosui: Integrate accel speed from very start of eeprom record
29296 Don't wait for the flight computer to have detected boost--that's
29297 often several samples after boost actually occurred, which can leave a
29298 bunch of acceleration out of the speed computation.
29300 Signed-off-by: Keith Packard <keithp@keithp.com>
29302 commit d35c4df12a3d8e2dab5d41f8d918ff4237f91e46
29303 Author: Keith Packard <keithp@keithp.com>
29304 Date: Sat Apr 7 01:01:33 2012 -0700
29306 altos: Add ability to change radio frequency in TeleTerra
29308 Provide a way to set the frequency locally.
29310 Signed-off-by: Keith Packard <keithp@keithp.com>
29312 commit 4700f63937786e8f6e9b4882363234a33eb54c46
29313 Author: Keith Packard <keithp@keithp.com>
29314 Date: Sat Apr 7 01:01:06 2012 -0700
29316 altos: Make ao_config_set_radio public
29318 Allows other bits of code to reset the radio parameters.
29320 Signed-off-by: Keith Packard <keithp@keithp.com>
29322 commit a0a650a2be007b0436bd527d6c18f36eef6fbe2b
29323 Author: Keith Packard <keithp@keithp.com>
29324 Date: Sat Apr 7 00:25:50 2012 -0700
29326 altos: Force radio channel to zero when setting frequency
29328 Otherwise, the actual radio frequency will include the channel offset,
29329 which is not useful.
29331 Signed-off-by: Keith Packard <keithp@keithp.com>
29333 commit c7119405a3dd7128120374a2a001bc98ef523619
29334 Author: Keith Packard <keithp@keithp.com>
29335 Date: Sat Apr 7 00:25:26 2012 -0700
29337 altos: Make ao_freq_to_set reentrant
29339 Save a bunch of data space this way.
29341 Signed-off-by: Keith Packard <keithp@keithp.com>
29343 commit d0d0d20c20e5eeacbc9a1ec1c93141a2044830fb
29344 Author: Keith Packard <keithp@keithp.com>
29345 Date: Sat Apr 7 00:24:59 2012 -0700
29347 altos: Shorten help strings
29349 Save a bit of code space
29351 Signed-off-by: Keith Packard <keithp@keithp.com>
29353 commit 8405efb6ca68c8216413b94e7acbdf51af00554a
29354 Author: Keith Packard <keithp@keithp.com>
29355 Date: Sat Apr 7 00:23:55 2012 -0700
29357 altos: Save memory in ao_config.c
29359 Shorten help messages.
29360 Stop setting aes_key on products not using aes key.
29362 Signed-off-by: Keith Packard <keithp@keithp.com>
29364 commit 41a8383ccd29351f3a88a374f9456d6efb71b9a0
29365 Author: Keith Packard <keithp@keithp.com>
29366 Date: Sat Apr 7 00:22:41 2012 -0700
29368 altos: Save memory in ao_cmd.c
29370 Shrink a couple of help strings
29371 move a variable in ao_cmd from data to pdata.
29373 Signed-off-by: Keith Packard <keithp@keithp.com>
29375 commit 5f63065a16b65618b39314880c72074f0a8b5550
29376 Author: Keith Packard <keithp@keithp.com>
29377 Date: Sat Apr 7 00:22:02 2012 -0700
29379 altos: Add fake install/uninstall targets for stm-bringup
29381 Keep global 'make install' from failing.
29382 Signed-off-by: Keith Packard <keithp@keithp.com>
29384 commit 5569e4df50648a3ec131ba5e244da9b67d1a67db
29385 Author: Keith Packard <keithp@keithp.com>
29386 Date: Sat Apr 7 00:21:03 2012 -0700
29388 altosui: Radio channel gets set to zero by altos when frequency is set
29390 Just remember what the channe is going to get set to.
29392 Signed-off-by: Keith Packard <keithp@keithp.com>
29394 commit 2db6b0f58811ffc44a468c8fbcacc08d37edd26c
29395 Author: Keith Packard <keithp@keithp.com>
29396 Date: Fri Apr 6 22:40:49 2012 -0700
29398 altos: Shuffle stm-demo SPI test code around a bit
29400 Move a debug printf beyond the chip select boundary to
29401 allow for more accurate timing.
29403 Send four bytes instead of just one.
29405 Signed-off-by: Keith Packard <keithp@keithp.com>
29407 commit 89201cdf2062b7319a0da4e266e4d6edba1493f8
29408 Author: Keith Packard <keithp@keithp.com>
29409 Date: Fri Apr 6 22:40:17 2012 -0700
29411 altos: Declare stm DMA address registers as volatile void *
29413 Eliminates a cast when assigning to them.
29415 Signed-off-by: Keith Packard <keithp@keithp.com>
29417 commit 0bcc23c3be1a20a362fea268901c600f9f0d287a
29418 Author: Keith Packard <keithp@keithp.com>
29419 Date: Fri Apr 6 22:39:45 2012 -0700
29421 altos: Disable DMA unit when idle
29423 Should save a bit of power
29425 Signed-off-by: Keith Packard <keithp@keithp.com>
29427 commit 20926b62a87154a846cb950dc542c737cd54826d
29428 Author: Keith Packard <keithp@keithp.com>
29429 Date: Fri Apr 6 22:39:12 2012 -0700
29431 altos: Disable STM SPI transceiver when idle
29433 Should save a bit of power.
29435 Signed-off-by: Keith Packard <keithp@keithp.com>
29437 commit 9b12bc445fe482306e4587ad60c6d2daf65a60f3
29438 Author: Keith Packard <keithp@keithp.com>
29439 Date: Fri Apr 6 18:07:07 2012 -0700
29441 altos: Add DMA, SPI and MS5607 drivers
29443 Signed-off-by: Keith Packard <keithp@keithp.com>
29445 commit 2a04ac8dff1bfc3efba8c7e4dc9c1a827496dbdf
29446 Author: Keith Packard <keithp@keithp.com>
29447 Date: Mon Apr 2 23:00:29 2012 -0700
29449 altos: megametrum builds an ELF file, not an IHX file
29451 Name it appropriately.
29453 Signed-off-by: Keith Packard <keithp@keithp.com>
29455 commit cf1e4d60e1fcd75fa734365a2666ea8930938128
29456 Author: Keith Packard <keithp@keithp.com>
29457 Date: Mon Apr 2 22:58:54 2012 -0700
29459 altos: Move SPI functions to architecture-specific location
29461 Some architecture specific stuff needs to use core altos code, so
29462 create new ao_arch_funcs.h files per architecture that get pulled in
29465 Signed-off-by: Keith Packard <keithp@keithp.com>
29467 commit c09d155328bd446bb84ac1068d380cceb884df22
29468 Author: Keith Packard <keithp@keithp.com>
29469 Date: Mon Apr 2 19:27:53 2012 -0700
29471 altos: Oops. Set per-USART STM baud rate register instead of usart1
29473 Was accidentally always setting usart1 instead of the per-usart
29474 register. Didn't work too well for other usarts...
29476 Signed-off-by: Keith Packard <keithp@keithp.com>
29478 commit 440226df03a85cd0047d876b57b2a3410bfb2b02
29479 Author: Bdale Garbee <bdale@gag.com>
29480 Date: Sat Mar 31 17:53:25 2012 -0600
29482 be explicit in a couple places about only using single-cell LiPo batteries
29484 commit 4ca52908c8b3f98a79588981f6878025250f0924
29485 Author: Bdale Garbee <bdale@gag.com>
29486 Date: Sat Mar 31 16:43:39 2012 -0600
29488 use explicit path not $(HOME) to find ARM toolchain for now
29490 commit 246618baf9b8803e5ae4e650eb46740d1128a010
29491 Author: Bdale Garbee <bdale@gag.com>
29492 Date: Sat Mar 31 16:43:11 2012 -0600
29494 add config file for gdb use with MegaMetrum via Olimex dongle
29496 commit b89f11139fae7ae722ed78d342a169ed2bf5c948
29497 Author: Keith Packard <keithp@keithp.com>
29498 Date: Sat Mar 31 12:44:14 2012 -0700
29500 Build megametrum-v0.1 by default
29502 commit bbf31b8591f89e2a1fcc7dac5f42d730a81473d2
29503 Author: Keith Packard <keithp@keithp.com>
29504 Date: Sat Mar 31 12:43:58 2012 -0700
29506 altos: Add stub cc1120 driver
29508 Signed-off-by: Keith Packard <keithp@keithp.com>
29510 commit 1f2b75518169c4f2da9762de46bf1d9a71a04d17
29511 Author: Keith Packard <keithp@keithp.com>
29512 Date: Wed Mar 28 21:54:32 2012 -0700
29514 altos: Move cc1111 DMA engine interface to cc1111/ao_arch.h from ao.h
29516 It's hardware specific
29518 Signed-off-by: Keith Packard <keithp@keithp.com>
29520 commit 47a9925f16f6a13b173c49d3873d91fc7cf6d46e
29521 Author: Keith Packard <keithp@keithp.com>
29522 Date: Wed Mar 28 21:53:30 2012 -0700
29524 altos: Move cc1111 AES driver to cc1111 directory
29526 Signed-off-by: Keith Packard <keithp@keithp.com>
29528 commit 93ae5f6ce09fa71ebd34f77a884684b3670c8b44
29529 Author: Bdale Garbee <bdale@gag.com>
29530 Date: Sat Mar 31 13:29:15 2012 -0600
29532 openocd config file for MegaMetrum
29534 commit b711768da6310a1b06f3b995a280587fed5f26cd
29535 Author: Keith Packard <keithp@keithp.com>
29536 Date: Wed Mar 28 21:45:44 2012 -0700
29538 Bump version to 1.0.9.4
29540 Signed-off-by: Keith Packard <keithp@keithp.com>
29542 commit 0993595035a2813deba6991fa25bc0d475f2e6bb
29543 Author: Keith Packard <keithp@keithp.com>
29544 Date: Wed Mar 28 21:45:02 2012 -0700
29546 altos: Add ao_freq.c to megametrum build
29548 I think this will be needed to compute radio settings on the cc1120
29550 Signed-off-by: Keith Packard <keithp@keithp.com>
29552 commit a157edbe1bf7fffd5a6041f7b1760674addd2229
29553 Author: Keith Packard <keithp@keithp.com>
29554 Date: Sun Mar 25 13:08:05 2012 -0700
29556 stm-demo does not use altitude.h
29558 commit c1531fb26461b9f4ec39672bbfaeb70e6f4d1056
29559 Author: Keith Packard <keithp@keithp.com>
29560 Date: Fri Mar 23 01:42:32 2012 -0700
29562 Use -Os for STM apps. Fix altos.ld to matchall .rodata* sections
29564 Without .rodata*, it would stick the flash copy of the data on top of
29565 any further .rodata* sections. Fortunately, the linker catches that
29568 Signed-off-by: Keith Packard <keithp@keithp.com>
29570 commit f2c110fb4531144f18f62200e4127738c84e87f1
29571 Author: Keith Packard <keithp@keithp.com>
29572 Date: Fri Mar 23 00:55:53 2012 -0700
29574 Get config stuff hooked up for MegaMetrum
29576 This stubs out enough stuff to let ao_config link and work
29578 Signed-off-by: Keith Packard <keithp@keithp.com>
29580 commit 0bda768c2be5b81bec13f21d4d3bb6a11a8e88fa
29581 Author: Keith Packard <keithp@keithp.com>
29582 Date: Fri Mar 23 00:43:47 2012 -0700
29584 Add preliminary MegaMetrum v0.1 support
29586 This turns on an LED, enables the internal R/C clock, hooks USART3 to
29587 the GPS chip and USART1 to the console.
29589 Signed-off-by: Keith Packard <keithp@keithp.com>
29591 commit c27e211796a64b6bbacfe6a1516e9872fdb0853e
29592 Author: Keith Packard <keithp@keithp.com>
29593 Date: Fri Mar 23 00:43:17 2012 -0700
29595 Use new Makefile.defs in stm-demo
29597 Signed-off-by: Keith Packard <keithp@keithp.com>
29599 commit d7ddfd4e6d75e50ca64a342181f5c52e9f4919af
29600 Author: Keith Packard <keithp@keithp.com>
29601 Date: Fri Mar 23 00:42:13 2012 -0700
29603 Use 16-bits for STM32 LED mask. Export serial I/O functions
29605 Signed-off-by: Keith Packard <keithp@keithp.com>
29607 commit 606d866153cb639a2400cbedbc45046372ad1b30
29608 Author: Keith Packard <keithp@keithp.com>
29609 Date: Fri Mar 23 00:40:48 2012 -0700
29611 Allow skytraq to be on non-default serial port
29613 Provide ao_gps_getchar, ao_gps_putchar and ao_gps_set_speed hooks to
29614 let product specify functions for serial access.
29616 Signed-off-by: Keith Packard <keithp@keithp.com>
29618 commit 25184baa36c20e3d661f94e642a33e8aae179d60
29619 Author: Keith Packard <keithp@keithp.com>
29620 Date: Fri Mar 23 00:40:09 2012 -0700
29622 Allow for more than 8 LEDs
29624 Provide hook for architecture-specific LED mask (AO_LED_TYPE)
29626 Signed-off-by: Keith Packard <keithp@keithp.com>
29628 commit 87ca5c9c5f9cea1b9e14468e4694ce6acc21955a
29629 Author: Keith Packard <keithp@keithp.com>
29630 Date: Fri Mar 23 00:19:06 2012 -0700
29632 Clean up STM build by moving common defs to Makefile.defs
29634 Shortens default Makefile a bit
29636 Signed-off-by: Keith Packard <keithp@keithp.com>
29638 commit 41a3fded116a3101789df44647d0eb06be07a25b
29639 Author: Keith Packard <keithp@keithp.com>
29640 Date: Fri Mar 23 00:04:47 2012 -0700
29642 Make stm-demo display a scrolling message
29644 Instead of trying to frob the LEDs, which are now owned by the serial
29647 Signed-off-by: Keith Packard <keithp@keithp.com>
29649 commit 9b5e98a3407b369803109bfc1409e4f8b6e848ba
29650 Author: Keith Packard <keithp@keithp.com>
29651 Date: Fri Mar 23 00:04:21 2012 -0700
29653 Flush LCD changes each time the text is updated
29655 Rather than requiring the caller to do it.
29657 Signed-off-by: Keith Packard <keithp@keithp.com>
29659 commit 6337b5f522be11926a6490d7bb27a4f7795da569
29660 Author: Keith Packard <keithp@keithp.com>
29661 Date: Fri Mar 23 00:03:29 2012 -0700
29663 Automatically set ALTERNATE pin mode when setting alternate function
29665 When selecting an alternate function, set the pin to alternate mode as
29666 well; there's no sense requiring two separate calls everywhere.
29668 Signed-off-by: Keith Packard <keithp@keithp.com>
29670 commit c9e61a4f1f0ce5e5177a2252e8b7a02a578e77f1
29671 Author: Keith Packard <keithp@keithp.com>
29672 Date: Fri Mar 23 00:02:38 2012 -0700
29674 Allow any STM usart to be used for stdio
29676 This also adds the alternate pin configurations for the other two
29679 Signed-off-by: Keith Packard <keithp@keithp.com>
29681 commit bf060b3e3ed655bbb8464f342d0a0b1745a06173
29682 Author: Keith Packard <keithp@keithp.com>
29683 Date: Fri Mar 23 00:01:50 2012 -0700
29685 Allow for more than one serial port in core AltOS
29687 Signed-off-by: Keith Packard <keithp@keithp.com>
29689 commit d236a5c7cd6e9b1d7192e801d63b4bd348cc2f12
29690 Author: Keith Packard <keithp@keithp.com>
29691 Date: Thu Mar 22 20:02:30 2012 -0700
29693 Move LCD string output code to ao_lcd_font.c
29695 It's all very specific to the 14-segment display, so
29698 Signed-off-by: Keith Packard <keithp@keithp.com>
29700 commit 6da2f5846f2d28ea1f09f60ef2cc3f68113ac62a
29701 Author: Keith Packard <keithp@keithp.com>
29702 Date: Thu Mar 22 19:43:29 2012 -0700
29704 Add LCD device driver to STM32L port
29706 This enables the 6-digit 14-character display on the STM32L discovery
29707 board and provides an ascii output to it.
29709 Signed-off-by: Keith Packard <keithp@keithp.com>
29711 commit a953ac32033ded18adf0cb3ca20134385fcd0a6d
29712 Author: Keith Packard <keithp@keithp.com>
29713 Date: Thu Mar 22 19:42:18 2012 -0700
29715 Add defines for LCD controller and RTC clocking
29717 Signed-off-by: Keith Packard <keithp@keithp.com>
29719 commit f6e557bc2f0bd6d4272ed00dd09554d27a83be89
29720 Author: Keith Packard <keithp@keithp.com>
29721 Date: Thu Mar 22 19:41:23 2012 -0700
29723 Actually enable usarts with the new usart code
29725 And move USART1 to PB6/PB7 to avoid conflicting with
29728 Signed-off-by: Keith Packard <keithp@keithp.com>
29730 commit 03fbc18ea17a9e77a1d4d8e0ddb97abbe5da3658
29731 Author: Keith Packard <keithp@keithp.com>
29732 Date: Wed Mar 21 16:24:06 2012 -0700
29734 Clean up multiple serial port support for STM32L
29736 Signed-off-by: Keith Packard <keithp@keithp.com>
29738 commit f560c961ae4fedec0c9f11d5b3635fcb0d67ed8e
29739 Author: Keith Packard <keithp@keithp.com>
29740 Date: Wed Mar 21 16:18:26 2012 -0700
29742 Add support for multiple serial ports on STM32L
29744 Signed-off-by: Keith Packard <keithp@keithp.com>
29746 commit faf2bea4fdb3dca7fbed35423a4fe4459ee92ceb
29747 Author: Keith Packard <keithp@keithp.com>
29748 Date: Mon Mar 19 11:25:40 2012 -0700
29750 Save/restore PRIMASK register on Cortex-M3
29752 This preserves the interrupt-enabled bit across context switches
29754 Signed-off-by: Keith Packard <keithp@keithp.com>
29756 commit 6a14bee42a8431c909bcd74b0acec57329bc0284
29757 Author: Keith Packard <keithp@keithp.com>
29758 Date: Mon Mar 19 11:24:43 2012 -0700
29760 Don't disable interrupts before saving interrupt flag on AVR
29762 This ignores the interrupt disabled state, so we'd always leave
29763 ao_yield with interrupts disabled.
29765 Signed-off-by: Keith Packard <keithp@keithp.com>
29767 commit 7662a0096a860cddac413a310305fe842830c3b5
29768 Author: Keith Packard <keithp@keithp.com>
29769 Date: Sun Mar 18 22:29:51 2012 -0700
29771 Add .gitignore file to stm-bringup
29773 Ignore generated binaries
29775 Signed-off-by: Keith Packard <keithp@keithp.com>
29777 commit 4be74ef0d13114707fd8217907a5ec457f886160
29778 Author: Keith Packard <keithp@keithp.com>
29779 Date: Sun Mar 18 22:26:43 2012 -0700
29781 Fix STM LED driver and blink LEDs on discovery board
29783 This adds a task to blink the LEDs, after first fixing up the LED
29784 output code to enable the GPIO and talk to the right pins for the
29787 Signed-off-by: Keith Packard <keithp@keithp.com>
29789 commit ab6ea9043b592c25948a70b6204d613756a9a250
29790 Author: Keith Packard <keithp@keithp.com>
29791 Date: Sun Mar 18 22:10:02 2012 -0700
29793 Basic OS running on STM32L
29795 This gets stm-demo working
29797 Signed-off-by: Keith Packard <keithp@keithp.com>
29799 commit 0cc01d378ae96325e429ad608b953661582939b0
29800 Author: Keith Packard <keithp@keithp.com>
29801 Date: Sun Mar 18 22:09:20 2012 -0700
29805 Provide a panic code for stack overflow.
29807 Signed-off-by: Keith Packard <keithp@keithp.com>
29809 commit 1ca46760cf903860dccb4864578558a1abb6e0fa
29810 Author: Keith Packard <keithp@keithp.com>
29811 Date: Sun Mar 18 22:08:48 2012 -0700
29813 When debugging, send ao_panic message to ao_debug_out
29815 Use the low-level debug hooks to get the panic state sent to the
29818 Signed-off-by: Keith Packard <keithp@keithp.com>
29820 commit 4bfce11873f34af9621c60f83a8355f85769f6d3
29821 Author: Keith Packard <keithp@keithp.com>
29822 Date: Sun Mar 18 22:07:07 2012 -0700
29824 When debugging, send pre-init output to ao_debug_out
29826 Before tasking is running, send output to ao_debug_out to help debug
29827 system initialization.
29829 Signed-off-by: Keith Packard <keithp@keithp.com>
29831 commit 93481fd3d9305a107b88c8a64de4194a6d94dc0e
29832 Author: Keith Packard <keithp@keithp.com>
29833 Date: Sun Mar 18 22:05:46 2012 -0700
29835 Incorrect type in ao_task_info for wchan
29837 Would truncate 32-bit pointers on arm.
29839 Signed-off-by: Keith Packard <keithp@keithp.com>
29841 commit 8ba5344514f8ed51f6fd69ca09f6c7035c4fd0da
29842 Author: Keith Packard <keithp@keithp.com>
29843 Date: Sat Mar 17 00:06:59 2012 -0700
29845 Add stm-demo program
29847 This runs AltOS and talks over the serial port.
29849 Signed-off-by: Keith Packard <keithp@keithp.com>
29851 commit 1d1b24bb20dec09145fbaa6fe6897898d47dd16e
29852 Author: Keith Packard <keithp@keithp.com>
29853 Date: Fri Mar 16 20:24:29 2012 -0700
29855 These were moved to the src/stm directory
29857 Signed-off-by: Keith Packard <keithp@keithp.com>
29859 commit b8100ea5042013bb4eed67907b4e9d4e5c196df2
29860 Author: Keith Packard <keithp@keithp.com>
29861 Date: Fri Mar 16 20:23:31 2012 -0700
29863 Add stm bringup timers and move most of the setup code to the stm dir
29865 Signed-off-by: Keith Packard <keithp@keithp.com>
29867 commit 9279fd42793123784ce83ca151df6f4630487722
29868 Author: Keith Packard <keithp@keithp.com>
29869 Date: Fri Mar 16 20:21:09 2012 -0700
29871 Add STM platform and stm-bringup demo program
29873 The stm-bringup doesn't run altos, it just initializes the device and
29874 writes stuff over a serial port. Works on the STM32L Discovery board
29875 at least, should do stuff on other boards too.
29877 Signed-off-by: Keith Packard <keithp@keithp.com>
29879 commit e2f13aa43ba79becbff6c9bfc18c665a58d96185
29880 Author: Keith Packard <keithp@keithp.com>
29881 Date: Fri Mar 16 14:25:37 2012 -0700
29883 Add example STM32L programs
29885 This loads to flash and sends data over the serial link.
29887 Signed-off-by: Keith Packard <keithp@keithp.com>
29889 commit 3c7d1f6cfffb43299041f2850a48177f4e9b83a5
29890 Author: Keith Packard <keithp@keithp.com>
29891 Date: Wed Feb 22 23:26:03 2012 +1300
29893 'stdin' is a special name in some compiler environments, don't use it.
29895 Switch to 'in' in the prototype for altos_serial_set_stdin.
29897 Signed-off-by: Keith Packard <keithp@keithp.com>
29899 commit bdfcc9112c41c494de23594963980a730b625cc4
29900 Author: Keith Packard <keithp@keithp.com>
29901 Date: Wed Mar 28 00:49:29 2012 -0700
29903 altosui: Disable launch controller button
29905 The launch controller should just be a separate program.
29907 Signed-off-by: Keith Packard <keithp@keithp.com>
29909 commit cf1e95810559584705d0b8a787375938c68e07c6
29910 Author: Keith Packard <keithp@keithp.com>
29911 Date: Wed Mar 28 00:37:52 2012 -0700
29913 altosui: Add Configure Ground Station dialog (trac #29)
29915 Allows the user to configure the teledongle frequency without opening
29916 up the flight monitor window, and also shows the teledongle fixed
29917 values like radio calibration, serial number and software version.
29919 Signed-off-by: Keith Packard <keithp@keithp.com>
29921 commit d60862fce6ac27a97ad6337eea32a4b48645d158
29922 Author: Keith Packard <keithp@keithp.com>
29923 Date: Wed Mar 28 00:38:37 2012 -0700
29925 altos: Make sure config values are loaded in 'c s' command
29927 ao_config_get may not have been called when ao_config_show is invoked
29928 by the user, so make sure the config values are loaded before showing
29929 uninitialized data.
29931 Signed-off-by: Keith Packard <keithp@keithp.com>
29933 commit b98f75dbcccd40c8cbf32c3bfd21bd6f5648b861
29934 Author: Keith Packard <keithp@keithp.com>
29935 Date: Tue Mar 27 22:54:17 2012 -0700
29937 altosui: Sanity check values from device configuration
29939 If someone has down-graded and re up-graded the firmware, the config
29940 entries may be garbage. Sanity check them to avoid crashing the UI.
29942 Signed-off-by: Keith Packard <keithp@keithp.com>
29944 commit b6c7ae2c1f8cba7351cd139c49322280d9d3af47
29945 Author: Keith Packard <keithp@keithp.com>
29946 Date: Tue Mar 27 22:53:08 2012 -0700
29948 altos: Reset config version if it's too large as well
29950 Any future config values will get trashed if we down grade the
29951 firmware, so we must reset the firmware version whenever it gets
29954 Signed-off-by: Keith Packard <keithp@keithp.com>
29956 commit 3f0379db7067eaf104892a82b9c49142087adece
29957 Author: Keith Packard <keithp@keithp.com>
29958 Date: Tue Mar 27 22:02:13 2012 -0700
29960 altosui: Make 'monitor idle' work with older TeleMetrum firmware (trac #28)
29962 Older TM firmware did not have the 'done' line at the end of the GPS
29963 report, rather it would just stop after showing the Flags value. Check
29964 the TM version and stop looking for GPS data when the Flags line appears.
29966 Signed-off-by: Keith Packard <keithp@keithp.com>
29968 commit 7a9baabaf33db5e30eb4ef8f923a4fd96fd28fb4
29969 Author: Keith Packard <keithp@keithp.com>
29970 Date: Tue Mar 27 21:49:58 2012 -0700
29972 altosui: Mark data 'Age' in monitor idle UI too
29974 Just like with the flight monitor UI, it's nice to know how old the
29975 data in the monitor idle UI is, in case the data link to the TM isn't reliable.
29977 Signed-off-by: Keith Packard <keithp@keithp.com>
29979 commit 2f19f9a0eaba22789fdc07a52849e8aaf6fe4695
29980 Author: Keith Packard <keithp@keithp.com>
29981 Date: Tue Mar 27 21:48:43 2012 -0700
29983 altosui: Catch attempt to set radio frequency to 0.0 -- use default
29985 Monitor idle was setting the frequency to 0, which takes a while with
29986 the new native radio frequency setting code. Don't do that, instead
29987 pull out the preferred frequency for that, as is done in other places
29988 where a frequency of 0.0 is used.
29990 Signed-off-by: Keith Packard <keithp@keithp.com>
29992 commit 170510bb183715e9ba580b180f20657d6602644e
29993 Author: Keith Packard <keithp@keithp.com>
29994 Date: Tue Mar 27 21:13:31 2012 -0700
29996 altosui: Find actual landing time when computing stats (trac #23)
29998 Look for the last time the height went from >10m to <2m from the
29999 nominal landing altitude and use that as the landing time when
30000 computing things like main descent speed, time under main etc.
30002 Signed-off-by: Keith Packard <keithp@keithp.com>
30004 commit 0952224c36eba25db34bd147d2d579c66b15bbf8
30005 Author: Keith Packard <keithp@keithp.com>
30006 Date: Tue Mar 27 18:24:51 2012 -0700
30008 altosui: Change flight data saving UI to separate download/delete selections
30010 First pop up a dialog to select flights for download. Download
30011 them. Then, after that, pop up a *new* dialog to select flights for
30012 delete. Offer to delete all of the downloaded flights by default. Then
30013 delete the flights.
30015 Signed-off-by: Keith Packard <keithp@keithp.com>
30017 commit 7dd1d62676c1e605fe69a4c0acfe7638c6b79aa5
30018 Author: Keith Packard <keithp@keithp.com>
30019 Date: Tue Mar 27 18:19:05 2012 -0700
30021 altos: Optimize ao_freq_to_set a bit
30023 Reduces size from 327 bytes to 287 bytes
30025 Signed-off-by: Keith Packard <keithp@keithp.com>
30027 commit d77a4ea206d627635159f35c76c744687d4e633b
30028 Author: Keith Packard <keithp@keithp.com>
30029 Date: Tue Mar 27 11:58:39 2012 -0700
30031 altosui: Show only supported telemetry version
30033 Make it clear in the UI which telemetry versions are supported,
30034 providing the combobox only for new firmware which supports all versions.
30036 Signed-off-by: Keith Packard <keithp@keithp.com>
30038 commit d8ebb83e64d66fa159e75aa560d39d80bb6d9d04
30039 Author: Keith Packard <keithp@keithp.com>
30040 Date: Tue Mar 27 10:38:32 2012 -0700
30042 altosui: Configure radio with new direct frequency setting
30044 Instead of computing the radio setting in altosui, let the radio do it directly.
30046 Signed-off-by: Keith Packard <keithp@keithp.com>
30048 commit c1d12a117b36de7fe8dd992959b890bfd1163e81
30049 Author: Keith Packard <keithp@keithp.com>
30050 Date: Mon Mar 26 23:35:35 2012 -0700
30052 Do radio settings solely by frequency
30054 Compute the radio setting needed based on the calibration value
30055 provided and the requested frequency.
30057 Signed-off-by: Keith Packard <keithp@keithp.com>
30059 commit c2550d72aee371676d2f09316051567681e53a7c
30060 Author: Keith Packard <keithp@keithp.com>
30061 Date: Mon Mar 26 22:05:04 2012 -0700
30063 altosui: Use ConcurrentHashMap for maps
30065 This data structure is accessed by multiple threads, so it needs to be
30068 Signed-off-by: Keith Packard <keithp@keithp.com>
30070 commit 8610fdae8f47e1e8b6e8525227cc912664ecfafd
30071 Author: Keith Packard <keithp@keithp.com>
30072 Date: Mon Mar 26 22:04:13 2012 -0700
30074 altosui: Show time since last packet in flight status window
30076 Makes it easy to see when the UI is wedged, and when telemetry data
30077 are being successfully received.
30079 Signed-off-by: Keith Packard <keithp@keithp.com>
30081 commit 392a3107b9e9cc8c1ea51df6ff5ec54817adbc65
30082 Author: Keith Packard <keithp@keithp.com>
30083 Date: Mon Mar 26 20:11:34 2012 -0700
30085 altosui: Restructure telemetry classes to be more sane
30087 * Make AltosTelemetryRecord be a class, rather than an interface.
30089 * Inherit from this for AltosTelemetryRecordLegacy and
30090 AltosTelemetryRecordRaw.
30092 * Remove bogus AltosTelemetryRecordGeneral class.
30094 Signed-off-by: Keith Packard <keithp@keithp.com>
30096 commit 77639dae0fb9975219c2e211ea6dd6c7965eeea2
30097 Author: Keith Packard <keithp@keithp.com>
30098 Date: Tue Sep 27 23:50:43 2011 -0700
30100 altos: Require callsign match in packet code
30102 Ignore packets with mismatching callsigns to avoid accidental
30103 connections between devices controlled by different stations.
30105 As a special case, if the device is configured with the default
30106 callsign (N0CALL), then let anyone connect. This allows configuration
30107 of new devices without needing to change the ground station callsign.
30109 Signed-off-by: Keith Packard <keithp@keithp.com>
30111 commit 1b4a4c7b6a0c3f93267f33482f490e7aa25c2158
30112 Author: Keith Packard <keithp@keithp.com>
30113 Date: Fri Jan 13 10:40:30 2012 -0800
30115 doc: Add companion SPI message protocol doc
30117 Signed-off-by: Keith Packard <keithp@keithp.com>
30119 commit 5d42ded7ebdb0c134c8dac61f41525c37d81ae61
30120 Author: Bdale Garbee <bdale@gag.com>
30121 Date: Fri Jan 13 10:44:23 2012 -0700
30123 update turnon_telemetrum to v1.2, add more turnon scripts
30125 commit f450f8bc70f857053b26c4379f54a318062e89a1
30126 Author: Keith Packard <keithp@keithp.com>
30127 Date: Tue Jan 3 22:27:59 2012 -0800
30129 altos: Set correct registers for serial0 baud
30131 oops. not going to work very well setting serial 1.
30133 Signed-off-by: Keith Packard <keithp@keithp.com>
30135 commit c6821ae734a7efaf2e069f6c5edf9605a9dbe125
30136 Author: Keith Packard <keithp@keithp.com>
30137 Date: Tue Jan 3 20:46:25 2012 -0800
30139 altos: flush stdout when fifo from arduino serial port is empty
30141 This avoids leaving bytes pending inside altos
30143 Signed-off-by: Keith Packard <keithp@keithp.com>
30145 commit 65b9b5d0d91fef2c7452dc77017f31f176672304
30146 Author: Keith Packard <keithp@keithp.com>
30147 Date: Tue Jan 3 20:42:41 2012 -0800
30149 Build teleshield by default
30151 commit 7a42f2e0f145d2d520aed8e241fa39f7cb62b19f
30152 Author: Keith Packard <keithp@keithp.com>
30153 Date: Tue Jan 3 20:41:15 2012 -0800
30155 altos: Add support for UART0 in async mode
30157 And copy bytes from it to stdout.
30159 Signed-off-by: Keith Packard <keithp@keithp.com>
30161 commit 085625ff3992454b59583d95a3c415597c51f754
30162 Author: Keith Packard <keithp@keithp.com>
30163 Date: Fri Dec 30 15:42:28 2011 -0800
30165 altos: More _asm -> __asm changes
30167 Missed a few last time
30169 Signed-off-by: Keith Packard <keithp@keithp.com>
30171 commit 614ab6a991258a5caad0ca12ae35d0288a5b7503
30172 Author: Keith Packard <keithp@keithp.com>
30173 Date: Fri Dec 30 15:38:32 2011 -0800
30175 altos: Clean up for SDCC 3.1 - more keywords
30179 remove variables named 'data'
30181 Signed-off-by: Keith Packard <keithp@keithp.com>
30183 commit bbb94a6a25a106316414a9a281e924f6c56e9f38
30184 Author: Keith Packard <keithp@keithp.com>
30185 Date: Fri Dec 30 12:27:35 2011 -0800
30187 altos: SDCC 3.1 wants __at instead of at
30189 Older SDCC would accept __at, so just replace all occurances unconditionally.
30191 Signed-off-by: Keith Packard <keithp@keithp.com>
30193 commit 4783ac9653fd4f816f839452795e0d2e52129d5b
30194 Author: Keith Packard <keithp@keithp.com>
30195 Date: Tue Dec 27 15:47:54 2011 -0800
30197 altos: Switch teleshield to use radio slave mode
30199 And bring it up at startup time by default
30201 Signed-off-by: Keith Packard <keithp@keithp.com>
30203 commit 791c137728dd3398bd7275be13cc9e6be96d7af4
30204 Author: Keith Packard <keithp@keithp.com>
30205 Date: Tue Dec 27 15:37:28 2011 -0800
30207 altos: Add teleshield directory and bring-up code
30209 This is cobbled together from various existing bits, but should at
30210 least provide some ability to test a teleshield board.
30212 Signed-off-by: Keith Packard <keithp@keithp.com>
30214 commit eff8611e3eb19853b06acfcd7e978c9046cd5f78
30215 Author: Keith Packard <keithp@keithp.com>
30216 Date: Sat Dec 17 17:05:06 2011 -0800
30218 altos: Create TeleMetrum v1.2 directory
30220 The hardware is software-compatible with v1.1, but it's nice to have
30221 the right version number in all of the files.
30223 Signed-off-by: Keith Packard <keithp@keithp.com>
30225 commit 6baf6f41040f7b074d8cc84ef75e254c5d2b466b
30226 Author: Keith Packard <keithp@keithp.com>
30227 Date: Sat Dec 17 16:58:04 2011 -0800
30229 altosui: googleearth doesn't accept spaces between coordinates anymore
30231 it got pickier for some reason; let's not put spaces in now.
30233 Signed-off-by: Keith Packard <keithp@keithp.com>
30235 commit dbf7c0c59854e040b65f068069d80716f02fc1bc
30236 Author: Keith Packard <keithp@keithp.com>
30237 Date: Sun Nov 13 23:03:22 2011 -0800
30239 altos: Fix pad orientation for pre-1.1 boards
30241 They use a different code path for accel as they don't have the
30242 VCC compensation code in place.
30244 Signed-off-by: Keith Packard <keithp@keithp.com>
30246 commit c1e293ff4953b51c19af8b52f2999419ea84e7e5
30247 Author: Keith Packard <keithp@keithp.com>
30248 Date: Sat Nov 12 19:19:40 2011 -0800
30250 altos: Add startup and config (view only) pages to TT
30252 The config page needs a pile of work before it's useful.
30254 Signed-off-by: Keith Packard <keithp@keithp.com>
30256 commit 02b4e52a5349217df43105eaa1fff6bfc7dac4cc
30257 Author: Keith Packard <keithp@keithp.com>
30258 Date: Sat Nov 12 19:18:53 2011 -0800
30260 altos: Enable packet master and debug in TT
30262 The code was already getting linked in, so we might as well use it.
30264 Signed-off-by: Keith Packard <keithp@keithp.com>
30266 commit e7044fd95472449e2fb860cef902fa458b91ccac
30267 Author: Keith Packard <keithp@keithp.com>
30268 Date: Sat Nov 12 19:18:23 2011 -0800
30270 altos: Fix sdcdb settings for telemetrum v1.0
30272 Signed-off-by: Keith Packard <keithp@keithp.com>
30274 commit 7f9e76e0d3492dcc8bf4b5b1f07c3c727cfdc0ef
30275 Author: Keith Packard <keithp@keithp.com>
30276 Date: Sat Nov 12 18:54:14 2011 -0800
30278 altos: Trim skytraq NMEA messages. Shrink NMEA header matching code
30280 Tell the skytraq to not bother sending a bunch of the NMEA messages
30281 that we don't parse.
30283 Explicitly look for 'G' follows by 'P' instead of having some general
30284 header matching code.
30286 Signed-off-by: Keith Packard <keithp@keithp.com>
30288 commit d3dcb9451f40506abced72783966104645a73bc7
30289 Author: Keith Packard <keithp@keithp.com>
30290 Date: Sat Nov 12 18:52:02 2011 -0800
30292 altos: Allow TT/TBT reports to escape landed state
30294 The TM altitude reporting code kept beeping out state and altitude
30295 forever, which isn't very useful on TBT or TT.
30297 Signed-off-by: Keith Packard <keithp@keithp.com>
30299 commit 0f7d7a4fbede63b51208bf051e08aa73dfbf35a0
30300 Author: Keith Packard <keithp@keithp.com>
30301 Date: Sat Nov 12 18:51:31 2011 -0800
30303 altos: Remove LCD debugging code
30305 This isn't needed anymore.
30307 Signed-off-by: Keith Packard <keithp@keithp.com>
30309 commit 430b439b9a5cc98b32273a233505de2c2f975c59
30310 Author: Keith Packard <keithp@keithp.com>
30311 Date: Sat Nov 12 18:51:03 2011 -0800
30313 altosui: Add ao_lcd_cursor_on/off
30315 This shows or hides a blinking cursor on the LCD.
30317 Signed-off-by: Keith Packard <keithp@keithp.com>
30319 commit 75a8490a7bee2a2c7afd559b13f1d9c40c2aa08f
30320 Author: Keith Packard <keithp@keithp.com>
30321 Date: Sat Nov 12 18:49:17 2011 -0800
30323 altos: Add configurable set of channels for TT
30325 This adds the channel list for TT, which will be configured by
30328 Signed-off-by: Keith Packard <keithp@keithp.com>
30330 commit 2ba946fea29ff134ffaeaea9d7932f4bd4e953aa
30331 Author: Keith Packard <keithp@keithp.com>
30332 Date: Sat Nov 12 18:48:07 2011 -0800
30334 altos: Export 'ao_cmd_is_white' for use by other code
30336 This function tests the current input character.
30338 Signed-off-by: Keith Packard <keithp@keithp.com>
30340 commit 20282ef00afe70e3f3193f6f0200254cb2c33e93
30341 Author: Keith Packard <keithp@keithp.com>
30342 Date: Sat Nov 12 18:47:08 2011 -0800
30344 altos: Set default flight log max to 127k on TM v0.1
30346 The flash part on v0.1 boards is only 128kB.
30348 Signed-off-by: Keith Packard <keithp@keithp.com>
30350 commit 5972c642f0de0789e90268bfa19ef8b51c06eebc
30351 Author: Keith Packard <keithp@keithp.com>
30352 Date: Sat Nov 12 18:44:36 2011 -0800
30354 altos: Handle internal and external telem monitoring requests
30356 Record separate internal vs external monitoring state, allowing
30357 both to happen at the same time, and when either is turned off, the
30358 other keeps working.
30360 This also adds disable/enable so that other radio users can
30361 temporarily take over the radio; monitoring will resume when the other
30362 radio user is finished.
30364 Signed-off-by: Keith Packard <keithp@keithp.com>
30366 commit ef7f86453d686a49882e8c1b88a59228c4c631a9
30367 Author: Keith Packard <keithp@keithp.com>
30368 Date: Sat Nov 12 18:37:53 2011 -0800
30370 altos: Check pdata+xdata memory usage during build
30372 The sdcc linker doesn't check the sum of pdata+xdata memory usage, it
30373 only ensures that xdata itself is small enough. This doesn't keep
30374 xdata below the end of usable ram on the cc1111 though (0xfe000).
30376 Fix up the check-stack program to also make sure all of xdata fits in
30379 Signed-off-by: Keith Packard <keithp@keithp.com>
30381 commit 2bce71eba9f44b6fcf64e307c8174824c3a0fb57
30382 Author: Keith Packard <keithp@keithp.com>
30383 Date: Sat Nov 12 18:32:49 2011 -0800
30385 altos: Set SPI fill value each time it is used.
30387 This ensures that the final MOSI pin value will be high after a
30388 receive is finished.
30390 Signed-off-by: Keith Packard <keithp@keithp.com>
30392 commit 0a705b62829d492e3a48c81077907cee61afb860
30393 Author: Keith Packard <keithp@keithp.com>
30394 Date: Sat Nov 12 18:31:46 2011 -0800
30396 altos: Initialize DMA config address at boot time
30398 Instead of resetting these each time a transfer is started, just set
30399 them once at boot time.
30401 Signed-off-by: Keith Packard <keithp@keithp.com>
30403 commit 4de8bf6da4d725bb0514d032b0708c5cf420e8fa
30404 Author: Keith Packard <keithp@keithp.com>
30405 Date: Sat Nov 12 18:30:56 2011 -0800
30407 altos: debounce buttons
30409 Provide API to clear out any button events that happen during startup,
30410 and then discard button events 'too close' together.
30412 Signed-off-by: Keith Packard <keithp@keithp.com>
30414 commit ad41b5820c2e252627959e4627473f07784be23e
30415 Author: Keith Packard <keithp@keithp.com>
30416 Date: Sat Nov 12 18:29:38 2011 -0800
30418 altos: Build TeleTerra v0.2 by default
30420 Signed-off-by: Keith Packard <keithp@keithp.com>
30422 commit f6db11c3c87725c809c518f5f19b07325faf9c84
30423 Author: Keith Packard <keithp@keithp.com>
30424 Date: Sat Nov 12 18:10:18 2011 -0800
30426 altosui: Deal with serial port exceptions a bit better
30428 This catches a few exceptions and tries to make sure the serial port
30429 is closed afterwards.
30431 Signed-off-by: Keith Packard <keithp@keithp.com>
30433 commit b132eefc5f63412bb4a98a4bb72b9055e40d5d42
30434 Author: Keith Packard <keithp@keithp.com>
30435 Date: Fri Nov 11 22:30:17 2011 -0800
30437 altos: Make ao_xmem funcs require __xdata void * instead of casting
30439 Having an explicit cast in the ao_xmem wrapper macros caused the
30440 compiler to generate garbage values for pdata addresses, making the
30441 upper byte 0x00 instead of the required 0xf0. Removing the
30442 casts from the ao_xmem macros exposed this problem, so a new
30443 PDATA_TO_XDATA macros was added, along with a CODE_TO_XDATA macro
30444 which serve to cast pointers, with suitable address modifications, so
30445 that things work again.
30447 Signed-off-by: Keith Packard <keithp@keithp.com>
30449 commit 7ecde50fbebe68a2e2200a2f8d081fd37074f840
30450 Author: Keith Packard <keithp@keithp.com>
30451 Date: Fri Nov 11 22:24:22 2011 -0800
30453 altosui: Make UI Look&Feel configurable
30455 Saves the preferred style and uses that for all current and new windows.
30457 Signed-off-by: Keith Packard <keithp@keithp.com>
30459 commit 713bd503902526c17a7657c18be947ef8fa6a47a
30460 Author: Keith Packard <keithp@keithp.com>
30461 Date: Fri Nov 11 17:18:08 2011 -0800
30463 altos: Shrink Skytraq NMEA parsing - common nmea_finish code
30465 This shares the checksum testing across all three lines, saving
30468 Signed-off-by: Keith Packard <keithp@keithp.com>
30470 commit d3e8275572550b700563b3bde73cd7a43b608f17
30471 Author: Keith Packard <keithp@keithp.com>
30472 Date: Fri Nov 11 17:11:39 2011 -0800
30474 altos: shrink Skytraq NMEA parsing more
30476 This cuts another 78 bytes
30478 Signed-off-by: Keith Packard <keithp@keithp.com>
30480 commit 8266d8d39c0103e68ef3e476b9639574d9a48771
30481 Author: Keith Packard <keithp@keithp.com>
30482 Date: Fri Nov 11 16:54:18 2011 -0800
30484 altos: Shrink code size of Skytraq NMEA parser
30486 Just mess around with the code to make it smaller. These patches save
30489 Signed-off-by: Keith Packard <keithp@keithp.com>
30491 commit df08b2f6de464f4546c1809b931eb4910d88b558
30492 Author: Keith Packard <keithp@keithp.com>
30493 Date: Thu Oct 27 01:01:11 2011 -0700
30495 altos: A bunch of missing .gitignore files (mostly)
30497 Signed-off-by: Keith Packard <keithp@keithp.com>
30499 commit a7b285ec0945830b8b31877115157ddd12d6a9fb
30500 Author: Keith Packard <keithp@keithp.com>
30501 Date: Thu Oct 27 00:57:45 2011 -0700
30503 altos: Add i2c driver for avr chip
30505 Signed-off-by: Keith Packard <keithp@keithp.com>
30507 commit 0669f0d74fc24c4f1925a45a9975b7a49a65b692
30508 Author: Keith Packard <keithp@keithp.com>
30509 Date: Thu Oct 27 00:49:23 2011 -0700
30511 altosui: Only update GPS data when new GPS information arrives
30513 Track which telemetry packets are actually producing new GPS
30514 information and only update the GPS average position and count of
30515 stable GPS reports with new GPS info, instead of on every telemetry packet.
30517 Signed-off-by: Keith Packard <keithp@keithp.com>
30519 commit c7e14a2750d437e8b77d68a944a0711e7a0c882b
30520 Author: Keith Packard <keithp@keithp.com>
30521 Date: Thu Oct 27 00:35:35 2011 -0700
30523 altos: Fix distance/bearing computations. Deal with large values
30525 Lots of little math errors dealing with large distances; easily tested
30526 as the GPS currently reports lat 24 lon 121, which is a long ways from
30529 Now reports distances in km when large, otherwise in m.
30531 Signed-off-by: Keith Packard <keithp@keithp.com>
30533 commit da330c5975b9f565d059ef8084dfdacc20f34246
30534 Author: Keith Packard <keithp@keithp.com>
30535 Date: Wed Oct 26 22:49:11 2011 -0700
30537 altos: Bring up basic TeleTerra v0.2 UI
30539 Lots of fun stuff here -- multiple panes of information.
30541 Signed-off-by: Keith Packard <keithp@keithp.com>
30543 commit 8e4cceedb5b758faae684978299e667c4bb06f4d
30544 Author: Keith Packard <keithp@keithp.com>
30545 Date: Sun Oct 23 15:24:02 2011 -0700
30547 altos: Flip button IRQ initialization around
30549 This matches what the docs suggest
30551 Signed-off-by: Keith Packard <keithp@keithp.com>
30553 commit 90e738a3379d258a48a7c92f6708040fc39c373a
30554 Author: Keith Packard <keithp@keithp.com>
30555 Date: Sun Oct 23 15:20:50 2011 -0700
30557 altos: Fix battery voltage computation.
30559 Full scale is 4.95V, not 3.333V.
30561 Signed-off-by: Keith Packard <keithp@keithp.com>
30563 commit f70553106707e3496d07eecb83f0c0a1acad7f77
30564 Author: Keith Packard <keithp@keithp.com>
30565 Date: Sun Oct 23 14:51:32 2011 -0700
30567 altos: Add battery voltage sampling driver
30569 For devices without a full ADC compliment, this just samples the
30570 battery pin and converts to mV.
30572 Signed-off-by: Keith Packard <keithp@keithp.com>
30574 commit 7e7a10c06a0486e9f869e361e46f2c98db9897b0
30575 Author: Keith Packard <keithp@keithp.com>
30576 Date: Sun Oct 23 14:08:59 2011 -0700
30578 altos: Add button driver and sample user
30580 Hook up the teleterra buttons and have them beep
30582 Signed-off-by: Keith Packard <keithp@keithp.com>
30584 commit 8e2736226fcd7c1ab1ba93a5ebac9b285ebf4733
30585 Author: Keith Packard <keithp@keithp.com>
30586 Date: Sun Oct 23 12:55:35 2011 -0700
30588 src/teleterra-v0.2: Initialize more hardware
30590 Initialize the flash storage and flight state reporting beeper.
30592 Signed-off-by: Keith Packard <keithp@keithp.com>
30594 commit 07d4477b2e8477e96a2f155a25f95e14a9a47efa
30595 Author: Keith Packard <keithp@keithp.com>
30596 Date: Sun Oct 23 12:51:05 2011 -0700
30598 altos/teleterra_0_2: Initialize LCD driver
30600 Initialize the LCD for testing.
30602 Signed-off-by: Keith Packard <keithp@keithp.com>
30604 commit 85b259c5bba7edbd2a79471bb1104bcf3904d536
30605 Author: Keith Packard <keithp@keithp.com>
30606 Date: Fri Oct 21 14:58:26 2011 -0700
30608 src/teleballoon-v1.1: Use Tm style initial state stuff
30610 Come up in pad mode unless someone talks to us while in idle mode.
30612 Signed-off-by: Keith Packard <keithp@keithp.com>
30614 commit eb61f7aa2c8b692bd892b85e782f249187c80e5c
30615 Author: Keith Packard <keithp@keithp.com>
30616 Date: Fri Oct 21 11:30:43 2011 -0700
30618 altos: Add teleballoon-v1.1 directory
30620 This is an alternate firmware load for telemetrum v1.1.
30622 Signed-off-by: Keith Packard <keithp@keithp.com>
30624 commit a10aa835a06b71e2cefeb6b10daaf8cc394603b6
30625 Author: Keith Packard <keithp@keithp.com>
30626 Date: Sat Oct 15 22:54:40 2011 -0700
30628 altos: Add LEGACY_MONITOR defines to more programs
30630 Make all monitoring programs define whether they want all of the old
30631 telemetry formats too.
30633 Signed-off-by: Keith Packard <keithp@keithp.com>
30635 commit aef732fc9cdf527a18f2959d6fb7903e832209da
30636 Author: Keith Packard <keithp@keithp.com>
30637 Date: Sat Oct 15 22:54:02 2011 -0700
30639 ao-bringup: Make it build with source restructuring
30641 Source code all moved around, need to find the header files in new directories.x
30643 Signed-off-by: Keith Packard <keithp@keithp.com>
30645 commit 0debe7ffc2aab2b4d08f42e488cb783ae91c36ab
30646 Author: Keith Packard <keithp@keithp.com>
30647 Date: Tue Oct 11 23:30:53 2011 -0600
30649 altos: Add TeleTerra v0.2 product
30651 This includes most of the necessary drivers.
30653 Signed-off-by: Keith Packard <keithp@keithp.com>
30655 commit 65873a3ad1d8e8b5ec002be2576c6f496543306a
30656 Author: Keith Packard <keithp@keithp.com>
30657 Date: Tue Oct 11 23:29:24 2011 -0600
30659 altos: oops -- forgot to add the cc1111 string code
30661 This is required for all cc1111 builds now; it provides xdata string
30664 Signed-off-by: Keith Packard <keithp@keithp.com>
30666 commit badda0d910c56135401dce9adc9e6abebdba2ad7
30667 Author: Keith Packard <keithp@keithp.com>
30668 Date: Tue Oct 11 23:28:02 2011 -0600
30670 altos: Split out arch-specific bits of LCD driver
30672 The arch-specific section just puts a single nibble to the device.
30674 Signed-off-by: Keith Packard <keithp@keithp.com>
30676 commit 47c2c0b79dc516d2566ae149605b7d70ef2dca98
30677 Author: Keith Packard <keithp@keithp.com>
30678 Date: Tue Oct 11 20:58:04 2011 -0600
30682 TeleScience and TelePyro now work.
30684 Signed-off-by: Keith Packard <keithp@keithp.com>
30686 commit 652c024ed37bfed5de17f45c772796d5cbe4599f
30687 Author: Keith Packard <keithp@keithp.com>
30688 Date: Tue Oct 11 18:48:55 2011 -0600
30690 altos/telescience: Add more header dependencies
30692 Signed-off-by: Keith Packard <keithp@keithp.com>
30694 commit 75960500d1f290fa9f82183431443ac122f12c19
30695 Author: Keith Packard <keithp@keithp.com>
30696 Date: Tue Oct 11 18:48:11 2011 -0600
30698 altos/avr: telescience doesn't have room for the flash write code
30700 This is useful for debugging the SPI and flash drivers, but not
30701 necessary in production code.
30703 Signed-off-by: Keith Packard <keithp@keithp.com>
30705 commit b80f8ffb61566cbd134c399ea6ccf9290075490b
30706 Author: Keith Packard <keithp@keithp.com>
30707 Date: Tue Oct 11 18:45:51 2011 -0600
30709 altos/avr: Must leave space for init stack in ram
30711 The stack used during system initialization lives at the top of RAM,
30712 so leave some space for that.
30714 Signed-off-by: Keith Packard <keithp@keithp.com>
30716 commit f1573a752425121d4c6a14285f1eb0fef3a8bea5
30717 Author: Keith Packard <keithp@keithp.com>
30718 Date: Tue Oct 11 18:44:48 2011 -0600
30720 altos/avr: Shrink default stack size to use less ram
30722 Not that we have any way of knowing how much stack we're using, but at
30723 least this seems to work.
30725 Signed-off-by: Keith Packard <keithp@keithp.com>
30727 commit cb837d9bb9e6736fcdfca7692b1f9490ea090838
30728 Author: Keith Packard <keithp@keithp.com>
30729 Date: Tue Oct 11 18:13:00 2011 -0600
30731 altos: Allow ao_science_slave to not log data
30733 This is mostly for debugging with flash writes disabled.
30735 Signed-off-by: Keith Packard <keithp@keithp.com>
30737 commit ac0bebc44bc657b303db4c41fa0c9624f3df9f4f
30738 Author: Keith Packard <keithp@keithp.com>
30739 Date: Tue Oct 11 18:11:56 2011 -0600
30741 altos: Make HAS_STORAGE_DEBUG define consistent
30743 This allows products to include the 'w' command for testing flash
30746 Signed-off-by: Keith Packard <keithp@keithp.com>
30748 commit 3a28846d3ff8f82b0e97c211b9debf6d67ee5af5
30749 Author: Keith Packard <keithp@keithp.com>
30750 Date: Tue Oct 11 18:10:45 2011 -0600
30752 altos/avr: Clear SPI receive buffer before clocking new data in
30754 I don't know why this is necessary, but the receive buffer gets
30755 'extra' data added somehow.
30757 Signed-off-by: Keith Packard <keithp@keithp.com>
30759 commit e60c470b426b7be08a33133e7d8c94201d7e96d4
30760 Author: Keith Packard <keithp@keithp.com>
30761 Date: Tue Oct 11 17:44:40 2011 -0600
30763 altos/avr: Pull-up on the SPI slave select pin
30765 This makes the board work even when disconnected from TeleMetrum.
30767 Signed-off-by: Keith Packard <keithp@keithp.com>
30769 commit af4470f8025116179ef83726a8287e47c465907b
30770 Author: Keith Packard <keithp@keithp.com>
30771 Date: Tue Oct 11 17:44:02 2011 -0600
30773 altos/avr: Register stdio handler when using serial for stdin
30775 This code was left in a bit of a mess; just clean it up.
30777 Signed-off-by: Keith Packard <keithp@keithp.com>
30779 commit 3bda859caf1501f8408703dca81412d70ba00e04
30780 Author: Keith Packard <keithp@keithp.com>
30781 Date: Tue Oct 11 17:42:24 2011 -0600
30783 altos/avr: telescience does not have a serial port
30785 The USART is used for SPI to talk to the flash part.
30787 Signed-off-by: Keith Packard <keithp@keithp.com>
30789 commit 0a186e92c5773c5d908e9cee889d645a8172dcdc
30790 Author: Keith Packard <keithp@keithp.com>
30791 Date: Tue Oct 11 17:39:35 2011 -0600
30793 altos/avr: Make ao_arch_critical argument be a statement
30795 Wrap the argument to ao_arch_critical in do { } while (0); to make
30796 sure it gets correctly checked as a statement.
30798 Signed-off-by: Keith Packard <keithp@keithp.com>
30800 commit f3453068b0feb640b9d11dbeb021c535ce8b4a31
30801 Author: Keith Packard <keithp@keithp.com>
30802 Date: Tue Oct 11 17:39:06 2011 -0600
30804 altos/avr: Print newline after dumping ADC values
30806 Cleans up the formating a bit.
30808 Signed-off-by: Keith Packard <keithp@keithp.com>
30810 commit 06b044629951b06c7ec9b0105b89f51b2880ebd0
30811 Author: Keith Packard <keithp@keithp.com>
30812 Date: Tue Oct 11 16:03:04 2011 -0600
30814 altos/avr: SPI mutex is now held by the caller, not the SPI driver
30816 SPI transactions generally require a read followed by a write, with
30817 the chip select held the whole time. As a result, the SPI bus must be
30818 held across multiple transactions. To make this reliable, the caller
30819 must hold the SPI mutex, instead of the underlying SPI driver.
30821 Signed-off-by: Keith Packard <keithp@keithp.com>
30823 commit 5d1361c95f94125cda244b4cc5e55c2fb77b680b
30824 Author: Keith Packard <keithp@keithp.com>
30825 Date: Sun Oct 9 11:09:25 2011 -0600
30827 altosui: Deal with missing state transitions in FlightStats window
30829 Any missing start/end times are pinned to the end of the flight.
30831 Signed-off-by: Keith Packard <keithp@keithp.com>
30833 commit 5c82b07471f017171c58a6968adf79901f46a987
30834 Author: Keith Packard <keithp@keithp.com>
30835 Date: Sun Oct 9 10:55:04 2011 -0600
30837 altosui: Deal with telem data that goes backwards in time
30839 The new telemetry stuff can send packets with older timestamps, so
30840 sort telem packets read from disk to create an in-order record of the flight.
30842 Signed-off-by: Keith Packard <keithp@keithp.com>
30844 commit 636b7b368e67346b0796cd84fbfd71e10966d61f
30845 Author: Keith Packard <keithp@keithp.com>
30846 Date: Sun Oct 9 10:21:56 2011 -0600
30848 altos: Respond to telemetry rate changes immediately
30850 Instead of waiting for the previous telemetry interval to expire,
30851 immediately switch to the new telemetry rate. This will provide
30852 more telemetry data early in the boost.
30854 Signed-off-by: Keith Packard <keithp@keithp.com>
30856 commit ca036c5616c3e745c0b878ed90618d4ff710c0e5
30857 Author: Keith Packard <keithp@keithp.com>
30858 Date: Sat Oct 8 22:19:52 2011 -0600
30860 altos: Improve TM v1.0 apogee estimate
30862 v1.0 boards have noisy accelerometer data caused by interactions
30863 between RF transmission and the accelerometer measurements; this noise
30864 generates a negative bias in the accelerometer readings. The net
30865 effect is that the estimated speed is lower than the actual speed,
30866 causing early an apogee estimate.
30868 By increasing the sigma value for accelerometer data, the kalman
30869 filter 'trusts' the acceleration data less, putting more weight on the
30870 barometer data. This causes the estimated time of apogee to be closer
30871 to the correct value.
30873 This reduces the response to changes in acceleration.
30875 This new value is applied solely to TeleMetrum v1.0 boards. v1.1
30876 boards correct for this error, and hence can use the correct sigma
30877 value for the accelerometer.
30879 Signed-off-by: Keith Packard <keithp@keithp.com>
30881 commit 26d7eb7149da8c797d7e704d75f73af2d2aa52c2
30882 Author: Keith Packard <keithp@keithp.com>
30883 Date: Sat Oct 8 21:31:34 2011 -0600
30887 (1.1 RC 2). Flown at Oktoberfest 2011 on 10/09/2011 (we hope)
30889 Signed-off-by: Keith Packard <keithp@keithp.com>
30891 commit aad03e3cab4c328e53d3df47b6dac1d3f7a49229
30892 Author: Keith Packard <keithp@keithp.com>
30893 Date: Sat Oct 8 16:07:57 2011 -0600
30895 altosui: Remove igniter voltages from chart.
30897 These are just annoying; when we add the ability to turn stuff on/off
30898 on the fly, we can add them to the list of available items.
30900 Signed-off-by: Keith Packard <keithp@keithp.com>
30902 commit 6a7363b3ba99310bd44c9b66f6f5159e46762be4
30903 Author: Keith Packard <keithp@keithp.com>
30904 Date: Sat Oct 8 11:51:05 2011 -0600
30906 altos: Ignore ejection bumps when doing boost re-detect
30908 An ejection charge looks an awful lot like an extra (really small)
30909 motor burn. Ignore them by averaging the acceleration during
30910 fast/coast using a /64 exponential decay filter.
30912 Signed-off-by: Keith Packard <keithp@keithp.com>
30914 commit 82604193ed0c522c1fba0072b504fe88b027f1ee
30915 Author: Keith Packard <keithp@keithp.com>
30916 Date: Sat Oct 8 11:50:24 2011 -0600
30918 ao-telem: Add new program to convert telem data to ascii
30920 This reads telem files and displays them in ascii form. It's not done,
30921 and it's not documented, but it's a start.
30923 Signed-off-by: Keith Packard <keithp@keithp.com>
30925 commit cbf5a649c8b7101bef9d57e48e42ac775e758c79
30926 Author: Keith Packard <keithp@keithp.com>
30927 Date: Sat Oct 8 11:46:38 2011 -0600
30929 altosui: Allow for multiple instances of each state in the graph
30931 With the new boost re-detect code, we can get multiple instances of
30932 boost/fast/coast, so make sure each are displayed in the graph.
30934 Signed-off-by: Keith Packard <keithp@keithp.com>
30936 commit f9b0b7423c0640f729d61a91de6ff96ffe4b486e
30937 Author: Keith Packard <keithp@keithp.com>
30938 Date: Sat Oct 8 11:43:37 2011 -0600
30940 altosui: Max acceleration across boost instead of all ascent
30942 This ignores ejection bumps, making the max acceleration far more useful.
30944 Signed-off-by: Keith Packard <keithp@keithp.com>
30946 commit 258b75498916183ed250d3abb3282fe3d843e7a1
30947 Author: Keith Packard <keithp@keithp.com>
30948 Date: Fri Oct 7 09:53:09 2011 -0600
30950 altos: Write xdata versions of memory functions
30952 These are significantly smaller than the general pointer versions from
30953 libc on the cc1111.
30955 Signed-off-by: Keith Packard <keithp@keithp.com>
30960 src/cc1111/ao_adc.c
30961 src/cc1111/ao_packet_master.c
30964 Fix up the new makefiles
30966 commit 128bbfa150f88c09f7adde2434b7bf0b5a9ed556
30967 Merge: f6f54d7 246864b
30968 Author: Keith Packard <keithp@keithp.com>
30969 Date: Fri Oct 7 08:41:56 2011 -0600
30971 Merge remote-tracking branch 'origin/simple-quiet' into multiarch
30978 commit f6f54d70b768dca1715ddddea64a4df00d82b09e
30979 Merge: 1c344b7 0d10e25
30980 Author: Keith Packard <keithp@keithp.com>
30981 Date: Fri Oct 7 08:40:14 2011 -0600
30983 Merge remote-tracking branch 'uniarch/master' into multiarch
30988 Use ao_arch_reboot after waiting for a second
30990 commit 0d10e25766b96f5660e213115cf27b71ff164405
30991 Author: Keith Packard <keithp@keithp.com>
30992 Date: Tue Sep 27 21:06:54 2011 -0700
30994 altos: TM: Don't turn on packet slave mode until idle/invalid state
30996 Leave the packet link disabled until we've checked the
30997 accelerometer. That way, we cannot accidentally get to idle mode when
30998 the rocket is on the rail.
31000 Signed-off-by: Keith Packard <keithp@keithp.com>
31002 commit fba1d605a627d03f9587ec060c45fb5d3e96aaeb
31003 Author: Keith Packard <keithp@keithp.com>
31004 Date: Mon Sep 26 11:50:28 2011 -0700
31006 altos: Delay reboot by a second to avoid re-entering idle mode
31008 TM and Tm go into idle mode if they receive a packet after boot
31009 time. When tebooting the device over the packet link, the packet
31010 master would be (rapidly) polling the device for additional data and
31011 so the device would invariably receive a packet during bootup and go
31012 into idle mode again.
31014 Delay the reboot by a second to give the controller time to disable
31015 the master end of the packet link.
31017 Signed-off-by: Keith Packard <keithp@keithp.com>
31019 commit 1c344b760776cd5d8c0297d8db9bf02687381b4e
31020 Merge: 4ed53ef fc4173f
31021 Author: Keith Packard <keithp@keithp.com>
31022 Date: Fri Oct 7 08:34:59 2011 -0600
31024 Merge remote-tracking branch 'origin/master' into multiarch
31029 Fix version number and location of ao.h header
31031 commit fc4173ff882dd9718f34ed043276ef612783dfe0
31032 Author: Bdale Garbee <bdale@gag.com>
31033 Date: Tue Sep 27 00:59:08 2011 -0600
31035 add run-time dependency on libjfreechart-java
31037 commit 989aae5b18856e3420ea5b7a26ddd8dccae9d6d3
31038 Merge: 0552fbe e44f1ff
31039 Author: Bdale Garbee <bdale@gag.com>
31040 Date: Sat Sep 24 15:34:59 2011 -0600
31042 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31044 commit 0552fbed34c9698dac30c239df2a823a8502b3f3
31045 Author: Bdale Garbee <bdale@gag.com>
31046 Date: Tue Aug 30 16:59:53 2011 -0600
31048 include 1.0.1 release notes in docs, closes: #642705
31050 commit 4ed53ef838afd4e922deb1c721a311974527525a
31051 Author: Keith Packard <keithp@keithp.com>
31052 Date: Fri Sep 23 10:24:33 2011 -0700
31054 altos: Debug code for telepyro doesn't fit in telescience
31056 Just too many strings.
31058 Signed-off-by: Keith Packard <keithp@keithp.com>
31060 commit f1328d22aab4378c4fb6f0c24dbee95948ca836c
31061 Author: Keith Packard <keithp@keithp.com>
31062 Date: Wed Sep 21 23:21:04 2011 -0700
31064 Dump test conversion of ADC0
31066 commit 9b498a6b1327f543c73145e02ff16e76d09f2fe4
31067 Author: Keith Packard <keithp@keithp.com>
31068 Date: Wed Sep 21 22:54:56 2011 -0700
31072 commit 7bc007ed45af8fe9ef5daeb7844f183cd9a49035
31073 Author: Keith Packard <keithp@keithp.com>
31074 Date: Wed Sep 21 18:13:55 2011 -0700
31076 altos: Fix make-kalman to run under dash
31078 Dash can't deal with >&, so use the old-school > file 2>&1
31080 Signed-off-by: Keith Packard <keithp@keithp.com>
31082 commit 74d5dea5d5ef91db823018b631613d15c6da085d
31083 Author: Bdale Garbee <bdale@gag.com>
31084 Date: Wed Sep 21 16:42:52 2011 -0600
31086 fix bashism that prevents building with /bin/sh->/bin/dash
31088 commit f68f22f527104cdffa1f5e398a51a466a13ff1fb
31089 Author: Bdale Garbee <bdale@gag.com>
31090 Date: Wed Sep 21 16:42:22 2011 -0600
31092 add missing sense_h entry in TelePyro table
31094 commit 16aa67fc77b82a9d051f205037b27a5384e3e3b7
31095 Author: Keith Packard <keithp@keithp.com>
31096 Date: Wed Sep 21 14:24:30 2011 -0700
31098 altos: missing ao_log_single.c
31100 Neglected to add this file.
31102 Signed-off-by: Keith Packard <keithp@keithp.com>
31104 commit 7a02d4bace05cc829522933b9df6b82a9e17336f
31105 Author: Keith Packard <keithp@keithp.com>
31106 Date: Wed Sep 21 11:30:43 2011 -0700
31108 altos: Add TelePyro v0.1 support
31110 Signed-off-by: Keith Packard <keithp@keithp.com>
31112 commit 0820f5c6dfe067590f36e8201a4049719dcf3d7c
31113 Author: Keith Packard <keithp@keithp.com>
31114 Date: Wed Sep 21 11:40:56 2011 -0700
31116 altos: Support staging by going back to boost as needed
31118 Detect additional motor burns by looking for high positive
31119 acceleration in coast or fast modes.
31121 Signed-off-by: Keith Packard <keithp@keithp.com>
31123 commit c8a00bb9ccdf0d4257f037c2bf996ce5e6b0b0c0
31124 Author: Keith Packard <keithp@keithp.com>
31125 Date: Wed Sep 21 11:39:24 2011 -0700
31127 altos: Pre-compute RDF packet len at compile time
31129 Instead of computing the RDF packet len at run time, which takes a
31130 pile of code space.
31132 Signed-off-by: Keith Packard <keithp@keithp.com>
31134 commit abf17522c206b465375b73a004a6d67bfa714ba3
31135 Author: Keith Packard <keithp@keithp.com>
31136 Date: Wed Sep 21 11:36:11 2011 -0700
31138 altos: SPI slave code is now per-product
31140 We can't write general purpose SPI slave code as we must eliminate
31141 any latency because the SPI ports have no buffering.
31143 Signed-off-by: Keith Packard <keithp@keithp.com>
31145 commit 246864b0597ddd397aba39be1fe39df0df189433
31146 Author: Keith Packard <keithp@keithp.com>
31147 Date: Fri Sep 16 18:27:56 2011 -0700
31149 Update to version 1.0.2
31151 Bdale is planning to fly this version on 9/17.
31153 Signed-off-by: Keith Packard <keithp@keithp.com>
31155 commit eaa7d7c7dd445ade7d8e3228306785f9a545b89a
31156 Author: Keith Packard <keithp@keithp.com>
31157 Date: Sun Sep 4 08:49:16 2011 -0700
31159 altos: Silence radio while firing igniters
31161 Hold the radio mutex while firing igniters to reduce potential
31162 interactions between the two.
31164 Signed-off-by: Keith Packard <keithp@keithp.com>
31166 commit d1e81db87ce0f89fd0b7651ca00979498cd00b78
31167 Author: Keith Packard <keithp@keithp.com>
31168 Date: Sun Sep 4 08:48:05 2011 -0700
31170 altos: Delay restart of RDF at apogee
31172 Instead of immediately trying to send RDF at apogee, start it after
31173 the usual RDF interval to avoid doing RDF while firing the apogee igniter.
31175 Signed-off-by: Keith Packard <keithp@keithp.com>
31177 commit e44f1ffb7104d70f5c9b9a90529ddbe1b75da074
31178 Author: Bdale Garbee <bdale@gag.com>
31179 Date: Tue Aug 30 16:59:53 2011 -0600
31181 include 1.0.1 release notes in docs
31183 commit b2d4e49bfe88aa61ca36fb1af8f3088c5754304c
31184 Author: Keith Packard <keithp@keithp.com>
31185 Date: Mon Aug 29 14:22:19 2011 -0700
31187 altos: Split avr clock initialization to ao_clock.c
31189 This will be shared with the attiny code for TeleTerra v0.1
31191 Signed-off-by: Keith Packard <keithp@keithp.com>
31193 commit e66fd72664aae7c000dce9c528803e28e7918fdf
31194 Author: Keith Packard <keithp@keithp.com>
31195 Date: Sun Aug 28 17:03:26 2011 -0700
31197 altos: don't beep igniter continuity for telenano
31199 Without any igniters, it's not nice to annoy people.
31201 Signed-off-by: Keith Packard <keithp@keithp.com>
31203 commit 122c4101164d598e655fa9ad8473053d30ff4212
31204 Author: Keith Packard <keithp@keithp.com>
31205 Date: Sun Aug 28 16:55:55 2011 -0700
31207 altos: Report continuity in telebt
31209 Report continuity values from remote altimeter
31211 Signed-off-by: Keith Packard <keithp@keithp.com>
31213 commit 9b9568a637ffdbc67225271005f2b996ee08a0df
31214 Author: Keith Packard <keithp@keithp.com>
31215 Date: Sun Aug 28 16:39:41 2011 -0700
31217 altos: add 'report' to telebt
31219 This beeps out flight state changes and max altitude at landing, just
31220 like the altimeter.
31222 Signed-off-by: Keith Packard <keithp@keithp.com>
31224 commit 31e3255b6cbfaf95c0e97e2d1ec8de72f845994c
31225 Author: Keith Packard <keithp@keithp.com>
31226 Date: Sun Aug 28 15:50:30 2011 -0700
31228 altosui: Report error message back from libaltos
31230 This includes changing all of the error dialogs to show the error
31231 message rather than just the file name.
31233 Signed-off-by: Keith Packard <keithp@keithp.com>
31235 commit cf72c2f5a69a736c28a9b63e124d510ef41a9f5d
31236 Author: Keith Packard <keithp@keithp.com>
31237 Date: Sun Aug 28 15:50:01 2011 -0700
31239 altosui: Add bluetooth bits back in
31241 Stub out functions on mac/windows for now.
31243 Signed-off-by: Keith Packard <keithp@keithp.com>
31245 commit 3d478a39f2ede7b805bbe568cc1c8ecc176d7a04
31246 Author: Keith Packard <keithp@keithp.com>
31247 Date: Sun Aug 28 15:45:05 2011 -0700
31249 altos: Add the BT serial debug code back in, disabled
31251 This code is useful whenever the BT stuff is acting up, so just leave
31252 the source in place, turned off by default.
31254 Signed-off-by: Keith Packard <keithp@keithp.com>
31256 commit 8eaa1c4697a3cfc2406e1adadc3094f7f712341a
31257 Author: Keith Packard <keithp@keithp.com>
31258 Date: Sun Aug 28 15:43:32 2011 -0700
31260 altos: Add pragma to eliminate unreachable code warning on SDCC
31262 This pragma was removed as GCC doesn't support it; make it conditional
31263 on SDCC so that we eliminate a warning message.
31265 Signed-off-by: Keith Packard <keithp@keithp.com>
31267 commit 7c6a3195dec6ac68f5d7b3f883ccc2c316384e76
31268 Author: Keith Packard <keithp@keithp.com>
31269 Date: Sun Aug 28 15:42:25 2011 -0700
31271 altos: Blink on telem packet receive instead of toggle
31273 Toggling the LED was too confusing; just blink for 100ms each time a
31276 Signed-off-by: Keith Packard <keithp@keithp.com>
31278 commit cff737c290347b61ba16584880c2f4c436b95042
31279 Author: Keith Packard <keithp@keithp.com>
31280 Date: Sun Aug 28 15:40:40 2011 -0700
31282 altos: Remove RSSI reporting from telebt
31284 Telebt uses one LED for bluetooth connection and the other for telem
31285 packet reception leaving none for RSSI.
31287 Signed-off-by: Keith Packard <keithp@keithp.com>
31289 commit 27835686648e14b030f6f7ec1fc0c0fd1c387ea4
31290 Author: Keith Packard <keithp@keithp.com>
31291 Date: Sun Aug 28 15:38:12 2011 -0700
31293 altos: Add RSSI blinking to new-style telemetry code
31295 Pull the RSSI data out locally and set the RSSI led blinking when
31296 using the variable-length TELEM output mechanism.
31298 Signed-off-by: Keith Packard <keithp@keithp.com>
31300 commit 6f231a3e512ff7fdd87a399a72c7c36f283394f3
31301 Author: Keith Packard <keithp@keithp.com>
31302 Date: Sun Aug 28 15:20:41 2011 -0700
31304 Bump version to 1.0.9.0
31306 Make it distinct from any production version
31308 Signed-off-by: Keith Packard <keithp@keithp.com>
31310 commit e53557373e539d591a03d02db146b27d08c7eba3
31311 Author: Keith Packard <keithp@keithp.com>
31312 Date: Sun Aug 28 15:18:29 2011 -0700
31314 altos: Start logging telemetry data right at boot time
31316 Anything logging telemetry data should just start logging packets as
31319 Signed-off-by: Keith Packard <keithp@keithp.com>
31321 commit 5c3a0263d292cb0675f608d0ef085d13e51ce6ba
31322 Author: Bdale Garbee <bdale@gag.com>
31323 Date: Sun Aug 28 13:39:37 2011 -0600
31325 update changelogs for Debian build
31327 commit b33a92e372327158ab21c1bb2d091c58761efe10
31328 Author: Keith Packard <keithp@keithp.com>
31329 Date: Sat Aug 27 15:19:43 2011 -0700
31331 altos: Share log code between telescience and telebt. Add telebt log
31333 Telescience and telebt both log data in 32-byte chunks, so share some
31334 code which manages that between the two products. Add simple telemetry
31337 Signed-off-by: Keith Packard <keithp@keithp.com>
31339 commit 7e2b5e2957ddcb808723081ca7e046a28b7e70e5
31340 Author: Keith Packard <keithp@keithp.com>
31341 Date: Sat Aug 27 13:30:34 2011 -0700
31343 altosui: launch controller button needs to move over
31345 monitor idle was inserted into position 2,2
31347 Signed-off-by: Keith Packard <keithp@keithp.com>
31349 commit bc827699be4ed9ac60a7e862e6532791968bf685
31350 Author: Keith Packard <keithp@keithp.com>
31351 Date: Sat Aug 27 13:28:01 2011 -0700
31353 altos: Fix up telelaunch Makefile
31355 Adding all of the mising sources
31357 Signed-off-by: Keith Packard <keithp@keithp.com>
31359 commit 8a1cbef0e316e38c80b71d3bac15641fe56e0a99
31360 Author: Keith Packard <keithp@keithp.com>
31361 Date: Sat Aug 27 13:27:28 2011 -0700
31363 altos: Add HAS_LOG for products that log to eeprom
31365 Some products have eeprom for config, but none for logging (like telelaunch)
31367 Signed-off-by: Keith Packard <keithp@keithp.com>
31369 commit 6afbc1876cd63f64e8975e300692f95a43866f5f
31370 Author: Keith Packard <keithp@keithp.com>
31371 Date: Sat Aug 27 13:27:00 2011 -0700
31373 altos: ao_launch belongs in cc1111
31375 Signed-off-by: Keith Packard <keithp@keithp.com>
31377 commit 9adf2c9c40ea1da2637ed809dc0d004e47844440
31378 Author: Keith Packard <keithp@keithp.com>
31379 Date: Sat Aug 27 13:25:23 2011 -0700
31381 altos: add ao_aes/radio_cmac to tidongle, teledongle and telebt
31383 All of these can do the telelco stuff at this point.
31385 Signed-off-by: Keith Packard <keithp@keithp.com>
31387 commit b3c95582774355c991d0a9f27d0a86881e643e62
31388 Author: Keith Packard <keithp@keithp.com>
31389 Date: Sat Aug 27 13:24:41 2011 -0700
31391 altos: move igniter defines back to ao_pins.h
31393 so that ao_launch gets them too
31395 Signed-off-by: Keith Packard <keithp@keithp.com>
31397 commit 6b2db651a1dbc7ea97fce802b5f10b88be1ab42b
31398 Author: Keith Packard <keithp@keithp.com>
31399 Date: Sat Aug 27 12:42:10 2011 -0700
31401 altos: Add makefile for telelaunch
31403 Signed-off-by: Keith Packard <keithp@keithp.com>
31405 commit 02df2141e5a67afc16acd01a6c60f3cc61052b93
31406 Author: Keith Packard <keithp@keithp.com>
31407 Date: Mon Aug 1 22:45:43 2011 -0700
31409 altosui: Hook up the launch controller UI from the main button box
31411 Provide a button to start the launch controller UI.
31413 Signed-off-by: Keith Packard <keithp@keithp.com>
31415 commit 4568bc796a6c362ebf7f72ee9a5fa4a9a3c4ba6a
31416 Author: Keith Packard <keithp@keithp.com>
31417 Date: Mon Aug 1 17:08:24 2011 -0700
31419 altosui: Add primitive UI for TeleLaunch
31421 Display status along with arm and fire buttons.
31423 Signed-off-by: Keith Packard <keithp@keithp.com>
31425 commit be117376179126824439d98379079025ca0b245a
31426 Author: Keith Packard <keithp@keithp.com>
31427 Date: Mon Aug 1 17:06:49 2011 -0700
31429 altos: Keep relay closed while firing launcher
31431 Instead of opening the relay while checking the desired state, keep it
31432 closed until the state goes off.
31434 Signed-off-by: Keith Packard <keithp@keithp.com>
31436 commit bc1b94df4d6b92e794ec93d9c1682ae5f61efa61
31437 Author: Keith Packard <keithp@keithp.com>
31438 Date: Thu Jul 21 22:25:45 2011 -0700
31440 altos: Finish up primitive telelaunch protocol
31442 This adds two commands to teledongle, one to query and one to actually
31443 fire the igniter. These will (eventually) want to be replaced with
31446 Signed-off-by: Keith Packard <keithp@keithp.com>
31448 commit 4299b5a36a2f6f9f7bbbc3a1b935dd2357c1fb0f
31449 Author: Keith Packard <keithp@keithp.com>
31450 Date: Thu Jul 21 20:04:05 2011 -0700
31452 altos: Implement remote launch protocol
31454 Uses the radio_cmac module to provide secure communication.
31455 Keeps igniter closed for 500ms.
31456 Provides remote status for arming and ignition.
31458 Signed-off-by: Keith Packard <keithp@keithp.com>
31460 commit 776df9ce2e7b4fa5cedda326988e66c614299af4
31461 Author: Keith Packard <keithp@keithp.com>
31462 Date: Wed Jul 20 23:46:04 2011 -0700
31464 altos: Get AES CBC-MAC packet transfers running
31466 This just has simple command-line based packet transfers for testing.
31468 This also adds special ao_telelaunch bits where the launch control
31471 Signed-off-by: Keith Packard <keithp@keithp.com>
31473 commit bd0bf00081bb24af5cd67a9351b0b0c1a041d0d3
31474 Author: Keith Packard <keithp@keithp.com>
31475 Date: Sat Jul 16 14:25:01 2011 -0700
31477 altos: More work on AES bits
31479 Signed-off-by: Keith Packard <keithp@keithp.com>
31481 commit a731d240f802d37524ce84c3c6acf22bcda4d522
31482 Author: Keith Packard <keithp@keithp.com>
31483 Date: Fri Jul 15 18:51:33 2011 -0700
31485 altos: Start work on AES and raw radio interfaces.
31487 We probably don't want this raw radio interface, but it's a start.
31489 Signed-off-by: Keith Packard <keithp@keithp.com>
31491 commit f145be3fc4ee94fdb5c1e2406b6c11d38bdbbd9b
31492 Author: Keith Packard <keithp@keithp.com>
31493 Date: Wed Jul 13 20:01:47 2011 -0700
31495 altos: Start telelaunch product
31497 Looks a lot like TM, but without the flight code.
31499 Signed-off-by: Keith Packard <keithp@keithp.com>
31501 commit 859ee0268b9f2e1f5933019f1231d857a1cac4da
31502 Author: Keith Packard <keithp@keithp.com>
31503 Date: Wed Jul 13 19:59:58 2011 -0700
31505 altosui: Add USB IDs for telelaunch and telelco to java bits
31507 telelaunch is 0x000f
31510 Signed-off-by: Keith Packard <keithp@keithp.com>
31512 commit b10fbbf0830053a39e4640a53598b1c027615c63
31513 Author: Keith Packard <keithp@keithp.com>
31514 Date: Mon Aug 1 22:44:13 2011 -0700
31516 altos: Add 'send all baro' compile-time option
31518 This option creates a new packet type that delivers full sensor-rate
31519 barometer telemetry data to allow for off-line analysis of flight
31520 algorithms using all of the data, rather than the slower rate provided
31521 either over telemetry or stored in the eeprom file.
31523 Define AO_SEND_ALL_BARO and this will get built in. Perhaps this could
31524 be a run-time option...
31526 Signed-off-by: Keith Packard <keithp@keithp.com>
31528 commit 1c46c419704f661064d200432eb7efeeb11b3859
31529 Author: Keith Packard <keithp@keithp.com>
31530 Date: Fri Aug 26 20:46:47 2011 -0700
31532 altos: re-order ao_task to match single-arch code
31534 This is just for testing to make the new build match the old build
31537 Signed-off-by: Keith Packard <keithp@keithp.com>
31539 commit c32893ce79835a8f861d6ef414644c2ff9769ff6
31540 Author: Keith Packard <keithp@keithp.com>
31541 Date: Fri Aug 26 15:02:43 2011 -0700
31543 altos: Integrate telescience support
31545 Adds a few drivers including an LCD driver
31547 Signed-off-by: Keith Packard <keithp@keithp.com>
31549 commit 93b8f40bb451c9ec152490d1f431ab18f8ecb7d1
31550 Author: Bdale Garbee <bdale@gag.com>
31551 Date: Fri Aug 26 10:52:55 2011 -0600
31553 more release process doc updates
31555 commit 9451ae5e4ea6ecfa512ba93197351682d4d043dc
31556 Author: Bdale Garbee <bdale@gag.com>
31557 Date: Fri Aug 26 10:51:18 2011 -0600
31559 update release process docs
31561 commit 01aee9ebe517ed657692e0a39a31ae0ddfb5b8b0
31562 Author: Bdale Garbee <bdale@gag.com>
31563 Date: Fri Aug 26 10:39:45 2011 -0600
31565 update changelogs for Debian build
31567 commit bc399d97a8424a5262f66a03e3bc403f793bb337
31568 Author: Bdale Garbee <bdale@gag.com>
31569 Date: Fri Aug 26 10:38:44 2011 -0600
31571 roll back packaging changelog for rebuild
31573 commit 13e6e799070a1469cbc2ff990379ee520b8f0e6a
31574 Author: Bdale Garbee <bdale@gag.com>
31575 Date: Fri Aug 26 10:29:58 2011 -0600
31577 roll release notes version from 1.0 to 1.0.1
31579 commit 1d15c841ad276127edae0345bd316c30731fffbf
31580 Author: Bdale Garbee <bdale@gag.com>
31581 Date: Fri Aug 26 10:24:35 2011 -0600
31583 ignore generated log file
31585 commit 58a74c3c3dcd01509224326cffeb67a3e809e4e6
31586 Author: Bdale Garbee <bdale@gag.com>
31587 Date: Fri Aug 26 10:07:15 2011 -0600
31589 fix telemini firmware path name
31591 commit 0a92eb2fa6b213533691288d8f99d72b80312983
31592 Author: Bdale Garbee <bdale@gag.com>
31593 Date: Fri Aug 26 09:43:06 2011 -0600
31595 update changelogs for Debian build
31597 commit 3cea033ec928c21b9f7b810898ed3c3cc536d2ce
31598 Author: Bdale Garbee <bdale@gag.com>
31599 Date: Fri Aug 26 09:41:46 2011 -0600
31601 get ready for a 1.0.1 release
31603 commit 674231773256bacd7acb4b5718c47412e47b813f
31604 Merge: 08e3d54 3bfe8df
31605 Author: Bdale Garbee <bdale@gag.com>
31606 Date: Fri Aug 26 09:37:01 2011 -0600
31608 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31610 commit 08e3d54bacf8b38a7c33e420a0bc19bcc7acedd4
31611 Author: Bdale Garbee <bdale@gag.com>
31612 Date: Fri Aug 26 09:35:54 2011 -0600
31614 moving git-buildpackage config into .git/ since it is fairly specific to
31615 Bdale's build environment, and doesn't need to be in the source package
31617 commit 8125acc030574afed6f23aa8aa302d9c768bb04e
31618 Author: Keith Packard <keithp@keithp.com>
31619 Date: Thu Aug 25 22:55:33 2011 -0700
31621 altos: get avr-demo to build. Pull in AVR drivers and LCD driver
31623 This completes the basic task of making an AVR version of altos by
31624 getting the Teensy 'avr-demo' program to build.
31626 Signed-off-by: Keith Packard <keithp@keithp.com>
31628 commit e9fab7dc99a0e7c22b511c5919adf7df85213252
31629 Author: Keith Packard <keithp@keithp.com>
31630 Date: Thu Aug 25 22:04:36 2011 -0700
31632 altos: add GCC/SDCC compat macros, init_stack, save_context and GCC stdio hooks
31634 More arch-indepdency bits.
31636 GCC stdio is different from SDCC, so create suitable code in
31639 Create macros to initialize the task stack frame and save the task
31642 Add GCC/SDCC type definition compatibility macros
31644 Signed-off-by: Keith Packard <keithp@keithp.com>
31646 commit a588092a7d76dab92e4ab11e0fdb457d2ddc9025
31647 Author: Keith Packard <keithp@keithp.com>
31648 Date: Thu Aug 25 21:10:56 2011 -0700
31650 altos: AVR changes - create ao_arch.h files, define ao_arch_reboot
31652 Start pulling changes needed for avr port; architecture-specific code
31653 will live in <architcture>/ao_arch.h. This first change defines
31654 the ao_arch_reboot macro to reboot the microcontroller.
31656 Signed-off-by: Keith Packard <keithp@keithp.com>
31658 commit 9513be7f9d3d0b0ec29f6487fa9dc8f1ac24d0de
31659 Author: Keith Packard <keithp@keithp.com>
31660 Date: Thu Aug 25 20:43:44 2011 -0700
31662 altos: Restructure altos build to prepare for multi-arch support
31664 Split out sources into separate directories:
31666 core: architecture and product independent bits
31667 cc1111: cc1111-specific code
31668 drivers: architecture independent drivers
31669 product: product-specific sources and Makefile fragments
31670 util: scripts for building stuff
31672 This should have no effect on the built products, but testing is encouraged
31674 Signed-off-by: Keith Packard <keithp@keithp.com>
31676 commit 3bfe8df44b575ca430ffaa051e20faa955a06c03
31677 Author: Keith Packard <keithp@keithp.com>
31678 Date: Thu Aug 25 18:02:45 2011 -0700
31680 altos: Clear callsign on initial config load
31682 Before being written the first time, ao_config will get set to 0xff
31683 when the config storage is read. This leaves the tail of the callsign
31684 filled with invalid bytes. Zero the whole thing before loading the
31685 default callsign to make sure any extra bytes are set correctly.
31687 Signed-off-by: Keith Packard <keithp@keithp.com>
31689 commit 93ecaf7f18f8f4c15953c2e80dc9e1b20d04fdfa
31690 Author: Bdale Garbee <bdale@gag.com>
31691 Date: Thu Aug 25 15:46:30 2011 -0600
31693 update TeleMini turnon script now that we've made a stable firmware release
31695 commit c3314dae2d3df82e188daf6ba8520cce833592c6
31696 Author: Bdale Garbee <bdale@gag.com>
31697 Date: Thu Aug 25 03:36:25 2011 -0600
31699 use multimaint-merge to make Debian changelogs less ugly
31701 commit f9d87de0e2681c2ec5753f4fffef0e61a3a9e144
31702 Author: Bdale Garbee <bdale@gag.com>
31703 Date: Thu Aug 25 02:22:53 2011 -0600
31705 update changelogs for Debian build
31707 commit 41998645c04a2ee856dec272b40c2dc5913291d3
31708 Author: Bdale Garbee <bdale@gag.com>
31709 Date: Thu Aug 25 02:16:17 2011 -0600
31711 add a postinst to remove sources.list.d fragment delivered by old private
31712 versions of this package, no longer needed once we have official packages
31714 commit d65e4f6b0a8ba8f67c8a916f2e8be0ec5c75f47d
31715 Author: Bdale Garbee <bdale@gag.com>
31716 Date: Thu Aug 25 02:05:49 2011 -0600
31718 really, I mean it, no longer deliver the sources.list fragment
31720 commit 0579bd5de9e7686d227a16951dd520439ca5472b
31721 Author: Bdale Garbee <bdale@gag.com>
31722 Date: Thu Aug 25 01:55:32 2011 -0600
31724 we need a main category in the desktop file
31726 commit 3ec03792adebbeadc9c0d4985c6f51877e8ab969
31727 Author: Bdale Garbee <bdale@gag.com>
31728 Date: Thu Aug 25 01:48:11 2011 -0600
31730 update desktop file for consistency with package section
31732 commit 0b1d5b678f0e36fbe09d4d3babffb77f857f098d
31733 Author: Bdale Garbee <bdale@gag.com>
31734 Date: Thu Aug 25 01:37:31 2011 -0600
31736 rewind packaging changelog to last tagged version
31738 commit f0891fc2e4fa4fd6dd5c2bfc74e4514de986a295
31739 Author: Bdale Garbee <bdale@gag.com>
31740 Date: Thu Aug 25 01:35:18 2011 -0600
31742 ao-view is no longer included in the altos package, so have the old-style
31743 Debian menu entry point to altosui instead
31745 commit a7ee1049519bf46b3864666999249876009fc3bf
31746 Author: Bdale Garbee <bdale@gag.com>
31747 Date: Thu Aug 25 01:35:06 2011 -0600
31749 changes in preparation for upload to Debian
31751 commit 2992184f7a032c95e22023080fbc26443ed786f5
31752 Author: Bdale Garbee <bdale@gag.com>
31753 Date: Thu Aug 25 01:30:36 2011 -0600
31755 don't deliver sources.list fragment in official Debian packages
31757 commit 3fc92a529dae410a41038cce38c6a44f5e58bd1f
31758 Author: Bdale Garbee <bdale@gag.com>
31759 Date: Thu Aug 25 01:11:47 2011 -0600
31763 commit 73abe19acf709c00f5352ec12e8cd6edae1d1963
31764 Merge: 1bd781d 5158493
31765 Author: Bdale Garbee <bdale@gag.com>
31766 Date: Thu Aug 25 00:34:49 2011 -0600
31768 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31771 doc/altusmetrum.xsl
31773 commit 1bd781da934c738e0c9294197c7eb622b0710a9a
31774 Author: Bdale Garbee <bdale@gag.com>
31775 Date: Thu Aug 25 00:32:47 2011 -0600
31779 commit 5158493c8df527e7527057c719c75248609eb3dc
31780 Author: Keith Packard <keithp@keithp.com>
31781 Date: Wed Aug 24 23:21:02 2011 -0700
31783 doc: Remove duplicate documentation about max flight log
31785 This was described in detail in both the System Operation and AltosUI
31786 chapters. Remove the duplicate from the AltosUI chapter.
31788 Signed-off-by: Keith Packard <keithp@keithp.com>
31790 commit e268798dc260311f5f0167909481b41c9d27fc1c
31791 Merge: 458f816 242344d
31792 Author: Keith Packard <keithp@keithp.com>
31793 Date: Wed Aug 24 23:06:44 2011 -0700
31795 Merge remote-tracking branch 'origin/master'
31797 commit 458f816ad23fd6784757b13b244057d4be64260e
31798 Author: Keith Packard <keithp@keithp.com>
31799 Date: Wed Aug 24 23:06:01 2011 -0700
31801 doc: Describe max flight log, ignite mode and pad orientation
31803 These describe what these configuration parmaeters do, not how to set them.
31805 Signed-off-by: Keith Packard <keithp@keithp.com>
31807 commit 242344d3e32e7c7cd9270d708555923fa888e4d8
31808 Merge: 5c1cf74 94a1b22
31809 Author: Bdale Garbee <bdale@gag.com>
31810 Date: Wed Aug 24 23:51:38 2011 -0600
31812 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31815 doc/altusmetrum.xsl
31817 commit 5c1cf7492b82e63a9db9d0238ecbcd2b59486893
31818 Author: Bdale Garbee <bdale@gag.com>
31819 Date: Wed Aug 24 23:50:31 2011 -0600
31823 commit 94a1b220bbfbb64b9772f3ee64a8e9d353d65e94
31824 Author: Keith Packard <keithp@keithp.com>
31825 Date: Wed Aug 24 22:29:56 2011 -0700
31827 doc: Move the remaining command-mode descriptions to the appendix
31829 Signed-off-by: Keith Packard <keithp@keithp.com>
31831 commit edfb553bb4fa5b0c7c6c658505b2a99d05fb13bf
31832 Merge: c74ab82 ec96f11
31833 Author: Bdale Garbee <bdale@gag.com>
31834 Date: Wed Aug 24 23:23:56 2011 -0600
31836 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31838 commit c74ab82a7b7a6ad6f79129a9ef5954270e7e8f11
31839 Author: Bdale Garbee <bdale@gag.com>
31840 Date: Wed Aug 24 23:23:45 2011 -0600
31844 commit ec96f11666f9cbd98e16caeccd5d399978bde81b
31845 Author: Keith Packard <keithp@keithp.com>
31846 Date: Wed Aug 24 22:20:29 2011 -0700
31848 doc: Updating Firmware is now a separate chapter
31850 The Flash Image paragraph references it, change the reference wording.
31852 Signed-off-by: Keith Packard <keithp@keithp.com>
31854 commit 11099fab63d32f53d0f2e04a7ab04392e39b5963
31855 Author: Keith Packard <keithp@keithp.com>
31856 Date: Wed Aug 24 22:18:29 2011 -0700
31858 doc: Move updating device firmware section to separate chapter
31860 This isn't central to operation of the devices, so move it out to a
31863 Signed-off-by: Keith Packard <keithp@keithp.com>
31865 commit 50769fbbeaaf61111d363411e0ef0b2868681cf4
31866 Merge: 425fa99 d92c173
31867 Author: Bdale Garbee <bdale@gag.com>
31868 Date: Wed Aug 24 23:15:20 2011 -0600
31870 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31872 commit 425fa995aeaccc1ec9ecf011f185b4406df61541
31873 Author: Bdale Garbee <bdale@gag.com>
31874 Date: Wed Aug 24 23:15:15 2011 -0600
31878 commit d92c173615a5fb0278ff6878595bed3f8d813e03
31879 Author: Keith Packard <keithp@keithp.com>
31880 Date: Wed Aug 24 22:12:39 2011 -0700
31882 doc: use 'radio link' to refer to packet command mode
31884 Make sure 'radio link' doesn't refer to telemetry and eliminate use of
31885 'RF link' and other similar but not identical phrases.
31887 Signed-off-by: Keith Packard <keithp@keithp.com>
31889 commit 65ca6f0d7c96432413868274b2cfdea4b76683e4
31890 Author: Bdale Garbee <bdale@gag.com>
31891 Date: Wed Aug 24 23:03:23 2011 -0600
31895 commit 09981cd024297fd4ef093c7468de2b9d5f3c2691
31896 Merge: a476e76 03c8b27
31897 Author: Bdale Garbee <bdale@gag.com>
31898 Date: Wed Aug 24 22:42:39 2011 -0600
31900 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31902 commit a476e76622b6fa70bf7c8883d2a2a64a382fbd78
31903 Author: Bdale Garbee <bdale@gag.com>
31904 Date: Wed Aug 24 22:42:33 2011 -0600
31908 commit 03c8b2702a45a12c4748cd1ec801d720c816d9e9
31909 Author: Keith Packard <keithp@keithp.com>
31910 Date: Wed Aug 24 21:39:48 2011 -0700
31912 doc: Move Packet Command Mode section to System Operations chapter
31914 It makes far more sense here.
31916 Signed-off-by: Keith Packard <keithp@keithp.com>
31918 commit 221157af586c6fd7368ee858a390f38bc5ed50f5
31919 Author: Keith Packard <keithp@keithp.com>
31920 Date: Wed Aug 24 21:31:05 2011 -0700
31922 doc: Describe packet command mode a bit better.
31924 Include comments about TeleMini in the introduction, and then explain
31925 a bit better what the best method of reliably initiating packet
31926 command mode are (start operation, then boot telemini).
31928 Signed-off-by: Keith Packard <keithp@keithp.com>
31930 commit d4e1aa92b6ce2f3e4c51029595d1d44a7f2f14a0
31931 Author: Bdale Garbee <bdale@gag.com>
31932 Date: Wed Aug 24 22:27:35 2011 -0600
31936 commit 6eff8d5831dde8e690586cd2a97ddf1595cd2674
31937 Author: Keith Packard <keithp@keithp.com>
31938 Date: Wed Aug 24 20:59:28 2011 -0700
31940 doc: Document pad-mode 'on-board data logging' indicator
31942 There wasn't any documentation for this field in the 'Launch Pad' tab.
31944 Signed-off-by: Keith Packard <keithp@keithp.com>
31946 commit ca0879ba6e5295b4fa790705f742eb647a462ea0
31947 Author: Keith Packard <keithp@keithp.com>
31948 Date: Wed Aug 24 20:42:09 2011 -0700
31950 doc: Spelling corrections in altusmetrum.xsl
31952 Lots of minor spelling errors.
31954 Signed-off-by: Keith Packard <keithp@keithp.com>
31956 commit 963649aa064acfe75d2ff4babd9a0d35dc254e86
31957 Author: Bdale Garbee <bdale@gag.com>
31958 Date: Wed Aug 24 21:39:21 2011 -0600
31960 doc tweaks through chap 3
31962 commit 3d88e0493ab446d7c7011786390d30618a72d045
31963 Merge: 02d6545 5a9972d
31964 Author: Bdale Garbee <bdale@gag.com>
31965 Date: Wed Aug 24 21:26:26 2011 -0600
31967 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
31969 commit 5a9972d41a87d4204c6c93cacf14e2962cc1c59c
31970 Author: Keith Packard <keithp@keithp.com>
31971 Date: Wed Aug 24 20:22:29 2011 -0700
31973 altos/windows: Get latest JRE 1.6 version (Version 6 update 27)
31975 No reason to download stale java bits.
31977 Signed-off-by: Keith Packard <keithp@keithp.com>
31979 commit cbfbaabb39f9f7709d00cf3dc63cc1bc7563062e
31980 Author: Keith Packard <keithp@keithp.com>
31981 Date: Wed Aug 24 19:13:03 2011 -0700
31983 altosui: Make flight monitor font size configurable
31985 Tiny netbooks aren't tall enough for the 'usual' font size, so provide
31986 a smaller option. Then provide a bigger option, just because.
31988 Signed-off-by: Keith Packard <keithp@keithp.com>
31990 commit 9849883a754a73b861dd7be530753ff5c2abb499
31991 Author: Keith Packard <keithp@keithp.com>
31992 Date: Wed Aug 24 01:48:28 2011 -0700
31994 altosui: Don't trust companion telemetry record 'channels' count
31996 It can be bogus, allowing the code to walk off the end of the
31997 allocated data array.
31999 Signed-off-by: Keith Packard <keithp@keithp.com>
32001 commit 02d65453225a3807e61b2ac6e2a26da31a05bd45
32002 Author: Bdale Garbee <bdale@gag.com>
32003 Date: Wed Aug 24 01:53:02 2011 -0600
32005 update changelogs for Debian build
32007 commit 1d286dab223e6c44a25180f944ccb5ba8ed9d5f5
32008 Author: Bdale Garbee <bdale@gag.com>
32009 Date: Wed Aug 24 01:51:54 2011 -0600
32011 prepare for another rebuild
32013 commit 82634eae16f9691a6c70a48d0858a399814631f2
32014 Author: Bdale Garbee <bdale@gag.com>
32015 Date: Wed Aug 24 01:50:56 2011 -0600
32017 add pkg-config to the build deps
32019 commit cf2823cab40aa450375c108bae8ed6b051fbefe5
32020 Author: Bdale Garbee <bdale@gag.com>
32021 Date: Wed Aug 24 01:45:28 2011 -0600
32023 update changelogs for Debian build
32025 commit bf6f00693c394f885d3378415dc7c8a1815a31ed
32026 Author: Bdale Garbee <bdale@gag.com>
32027 Date: Wed Aug 24 01:43:59 2011 -0600
32029 roll changelog back in prep for another test build
32031 commit 06aee245eb74e839e50226fa2ddb967c3977fe7c
32032 Author: Bdale Garbee <bdale@gag.com>
32033 Date: Wed Aug 24 01:41:53 2011 -0600
32037 commit 4d94e8f9f807a0bbeab0cdead011e74eeca1d1b6
32038 Merge: 4b5369d 3b0a9a1
32039 Author: Bdale Garbee <bdale@gag.com>
32040 Date: Wed Aug 24 01:38:58 2011 -0600
32042 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
32044 commit 3b0a9a1c87390747492bfef435ac8e0829ec748f
32045 Author: Keith Packard <keithp@keithp.com>
32046 Date: Wed Aug 24 00:29:36 2011 -0700
32048 altosui: Try to get dialogs to look a little better
32050 grid bag constraints are not my friend.
32052 Signed-off-by: Keith Packard <keithp@keithp.com>
32054 commit 2165e82327faaada23f0503b8e49b80f938b746c
32055 Author: Keith Packard <keithp@keithp.com>
32056 Date: Wed Aug 24 00:09:51 2011 -0700
32058 altosui: Add tool-tips to config dialogs
32060 Provides more information about the various settings, and, when
32061 they're disabled, tells the user why.
32063 Signed-off-by: Keith Packard <keithp@keithp.com>
32065 commit 63808e0392f43633f92fee137d968e969dd364c9
32066 Author: Keith Packard <keithp@keithp.com>
32067 Date: Tue Aug 23 23:20:00 2011 -0700
32069 Remove stale tools (ao-dumplog, ao-postflight, ao-view)
32071 These tools have all been supplanted by altosui at this point, and
32072 keeping them around increases the build dependencies by quite a lot.
32074 Signed-off-by: Keith Packard <keithp@keithp.com>
32076 commit 186dfc7c72aa7eba281f29f917088e49e44c2ddc
32077 Author: Keith Packard <keithp@keithp.com>
32078 Date: Tue Aug 23 22:51:57 2011 -0700
32080 altosui: Use system look&feel
32082 Turn on the 'be less ugly bit'
32084 Signed-off-by: Keith Packard <keithp@keithp.com>
32086 commit 4b5369dc3da2fc8441eeacbf094537b0cf52240d
32087 Author: Bdale Garbee <bdale@gag.com>
32088 Date: Tue Aug 23 21:37:17 2011 -0600
32090 update changelogs for Debian build
32092 commit 99316a17a9642a207c45610e7cc1c33c2600ece0
32093 Author: Bdale Garbee <bdale@gag.com>
32094 Date: Tue Aug 23 21:33:53 2011 -0600
32096 rewind changelog to 0.9.6.0 for rebuild
32098 commit 192881b7cae49af375cc2b8b7305c937079ee724
32099 Author: Bdale Garbee <bdale@gag.com>
32100 Date: Tue Aug 23 20:11:01 2011 -0600
32102 update changelogs for Debian build
32104 commit fc7e46b1215ea2b4cc138ed77d8eaa122369b15f
32105 Author: Bdale Garbee <bdale@gag.com>
32106 Date: Tue Aug 23 20:10:14 2011 -0600
32108 turn off auto-tagging during Debian build
32110 commit 998adccc1c4f8f6c44833bbf4a52d9441748b996
32111 Author: Keith Packard <keithp@keithp.com>
32112 Date: Tue Aug 23 18:56:07 2011 -0700
32114 altosui: add tool-tips to the button box.
32116 Signed-off-by: Keith Packard <keithp@keithp.com>
32118 commit 754b9591574c12ddd6e4ab590c6a5f3806b80213
32119 Author: Keith Packard <keithp@keithp.com>
32120 Date: Tue Aug 23 13:29:23 2011 -0700
32122 libaltos: fix Mac OS X function signatures
32124 altos_list_start was declared to take a (int time) parameter for some reason.
32126 Signed-off-by: Keith Packard <keithp@keithp.com>
32128 commit fa6df3fa21e8f09e70371e6c6cc7827a533b4fe6
32129 Author: Keith Packard <keithp@keithp.com>
32130 Date: Mon Aug 22 23:35:28 2011 -0700
32132 altosui: Update mac os X library
32134 This has been tested on 32-bit OS X and it works; dunno about
32137 Signed-off-by: Keith Packard <keithp@keithp.com>
32139 commit 955989147f90a4fd22c1375d1b41425dae4e7dd1
32140 Author: Keith Packard <keithp@keithp.com>
32141 Date: Mon Aug 22 23:34:55 2011 -0700
32143 altosui: Reset all config data on 'reset' command
32145 This lets you switch altimeters without getting any stale data.
32147 Signed-off-by: Keith Packard <keithp@keithp.com>
32149 commit d249da3fb064754753bd20cd2ca1e5ffcce294ca
32150 Author: Keith Packard <keithp@keithp.com>
32151 Date: Mon Aug 22 23:33:52 2011 -0700
32153 altosui: Only 'show' config dialog once
32155 Otherwise, the dialog jumps back to the initial position each time the
32158 Signed-off-by: Keith Packard <keithp@keithp.com>
32160 commit e9254c3472e42d93181674b2c3cd80fe6eea696e
32161 Author: Keith Packard <keithp@keithp.com>
32162 Date: Mon Aug 22 23:32:36 2011 -0700
32164 altosui: fix 'magic' string to signal end of config data
32166 Was using "done", which happens to be displayed by the 'l'
32167 command. Switch to 'all finished' which doesn't appear in the config
32168 data output. Yes, this method is a kludge.
32170 Signed-off-by: Keith Packard <keithp@keithp.com>
32172 commit 4aebe65b089e4b825a5ae238b81e2181bd88175a
32173 Author: Keith Packard <keithp@keithp.com>
32174 Date: Mon Aug 22 23:31:54 2011 -0700
32176 altosui: Can't configure flight log max on TeleMini
32178 It's only got space for one flight.
32180 Signed-off-by: Keith Packard <keithp@keithp.com>
32182 commit 3a84e8e0cc86481c301f4335843a0e1a94bad5c0
32183 Author: Keith Packard <keithp@keithp.com>
32184 Date: Mon Aug 22 23:12:30 2011 -0700
32186 altosui: Make monitor-idle display correct 'On-board data logging' status
32188 Count number of stored flights and see if there's space for another
32191 Signed-off-by: Keith Packard <keithp@keithp.com>
32193 commit afe6aba9cb91e93234ffee2a22eee40f848ddedd
32194 Author: Keith Packard <keithp@keithp.com>
32195 Date: Mon Aug 22 18:25:34 2011 -0700
32197 altosui: Add --summary option to dump flight stats to stdout
32199 useful for quickly capturing sense of a flight.
32201 Signed-off-by: Keith Packard <keithp@keithp.com>
32203 commit 4e2fd7ae76c23aa8da1390ebcbd8f45276cd7a32
32204 Author: Keith Packard <keithp@keithp.com>
32205 Date: Mon Aug 22 18:24:54 2011 -0700
32207 altosui: Show filename in AltosGraph window
32209 Makes it easier to tell multiple windows apart
32211 Signed-off-by: Keith Packard <keithp@keithp.com>
32213 commit f4ea46dc205454411c224ada7805f813989efd4a
32214 Author: Keith Packard <keithp@keithp.com>
32215 Date: Mon Aug 22 18:23:41 2011 -0700
32217 altosui: Add date/time/serial/flight to flight stats tab
32219 And switch to using the AltosConvert units conversions functions.
32221 Signed-off-by: Keith Packard <keithp@keithp.com>
32223 commit b4c71ba56c471720c72853057d0a527825a78fa0
32224 Author: Keith Packard <keithp@keithp.com>
32225 Date: Mon Aug 22 18:22:21 2011 -0700
32227 altosui: Capture date/time/serial/flight in AltosFlightStats
32229 Time is the time when boost was detected.
32231 Signed-off-by: Keith Packard <keithp@keithp.com>
32233 commit 5ef731bd87c6d2a71a4edcc69a218eaf1aa7c465
32234 Author: Keith Packard <keithp@keithp.com>
32235 Date: Mon Aug 22 18:21:35 2011 -0700
32237 altosui: Add a few simple unit conversions
32239 Signed-off-by: Keith Packard <keithp@keithp.com>
32241 commit b83d8eca433ed5796835f6a09271f50c7f27cc81
32242 Author: Keith Packard <keithp@keithp.com>
32243 Date: Mon Aug 22 17:18:02 2011 -0700
32245 doc: Add Installation Recommendations chapter
32247 Document installation suggestions, including mounting, RFI, antenna
32248 issues and ground testing.
32250 Signed-off-by: Keith Packard <keithp@keithp.com>
32252 commit a0f62b8569c5535a2598cfb6ab52db79f0a52f92
32253 Author: Keith Packard <keithp@keithp.com>
32254 Date: Mon Aug 22 17:17:43 2011 -0700
32256 doc: Add note about telemetry disable mode to 1.0 release notes
32258 Signed-off-by: Keith Packard <keithp@keithp.com>
32260 commit 393d231b9689cd1c358600ee76e0e808f89670c8
32261 Author: Keith Packard <keithp@keithp.com>
32262 Date: Sun Aug 21 22:52:45 2011 -0700
32264 altosui: Attempt to make both 32- and 64-bit windows DLLs
32266 We'll see if they work...
32268 Signed-off-by: Keith Packard <keithp@keithp.com>
32270 commit d5bd40847b17c32405dfba864a2a5a3b19aa7e85
32271 Author: Keith Packard <keithp@keithp.com>
32272 Date: Sun Aug 21 22:12:53 2011 -0700
32274 altosui/windows: Fix a bunch of windows compiler warnings.
32276 Some of these may have actually been serious -- a write length was
32277 getting stored in a signed char...
32279 Signed-off-by: Keith Packard <keithp@keithp.com>
32281 commit 2353d83be15b398754c2564f95374c6ea0f8de92
32282 Author: Keith Packard <keithp@keithp.com>
32283 Date: Sun Aug 21 22:12:04 2011 -0700
32285 altos-fat/windows: Check and install Java 1.6 as needed
32287 Signed-off-by: Keith Packard <keithp@keithp.com>
32289 commit a08826292ebd802a1ff2effccac3b96fd061c47d
32290 Merge: 3366cfe 55be3db
32291 Author: Bdale Garbee <bdale@gag.com>
32292 Date: Mon Aug 22 16:08:55 2011 -0600
32294 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
32296 commit 55be3db2e31fe97e7f351e3c490b8bc4cf7192b2
32297 Author: Keith Packard <keithp@keithp.com>
32298 Date: Sun Aug 21 19:18:54 2011 -0700
32300 altosui: Clean up command line processing. Add --graph
32302 Make the command line processing a bit less ad-hoc, track 'mode' of
32303 processing and deal with all files on the command line.
32305 Signed-off-by: Keith Packard <keithp@keithp.com>
32307 commit 6823ad5e48fc0a19791d96f886b5689f88c4311b
32308 Author: Keith Packard <keithp@keithp.com>
32309 Date: Thu Aug 18 18:02:02 2011 -0700
32311 altos/altosui: Add ability to disable telemetry/rdf completely
32313 This turns off the telemetry system so that it never transmits telemetry
32314 or RDF tones. In idle mode, it will still accept packet mode connections.
32316 Signed-off-by: Keith Packard <keithp@keithp.com>
32318 commit a08e7ac8bd3840b699c9a1ffc6b1e115b2b84bad
32319 Author: Keith Packard <keithp@keithp.com>
32320 Date: Sat Aug 20 11:35:55 2011 -0700
32322 Bump version to 0.9.7
32324 Bdale is flying 0.9.6 at chili blaster, make sure later firmware gets
32325 a later version number.
32327 Signed-off-by: Keith Packard <keithp@keithp.com>
32329 commit f2b0900f8b83fcb3085f3d042ffd961ffd758d5d
32330 Author: Keith Packard <keithp@keithp.com>
32331 Date: Sat Aug 20 11:28:53 2011 -0700
32333 altos: Merge common config code in ao_config.c
32335 This shuffles code around in ao_config.c to share some common code
32336 segments for starting and committing config changes.
32338 This also stops printing out changes as they are made which aren't
32339 needed by the UI code.
32341 Signed-off-by: Keith Packard <keithp@keithp.com>
32343 commit 67f28c58db0deca8f8050d33e97ad96017f4baaa
32344 Author: Keith Packard <keithp@keithp.com>
32345 Date: Sat Aug 20 11:19:57 2011 -0700
32347 altosui: Disable 'max flight log' config when there are stored flights
32349 When flights are stored in flash, the maximum flight log value cannot
32350 be changed as the flight data might need to be moved around in
32351 memory. Check for this case by looking for stored flights and
32352 disabling the combo box when storage is not empty.
32354 Signed-off-by: Keith Packard <keithp@keithp.com>
32356 commit fcff63baf8fde1174571a2c7c860099e19dbf629
32357 Author: Keith Packard <keithp@keithp.com>
32358 Date: Sat Aug 20 10:43:28 2011 -0700
32360 altosui: remove debug printf in pad pane
32362 Signed-off-by: Keith Packard <keithp@keithp.com>
32364 commit 3366cfe6145f64cdb04654854d5390c671a288e3
32365 Author: Bdale Garbee <bdale@gag.com>
32366 Date: Sat Aug 20 09:28:04 2011 -0600
32368 update changelogs for Debian build
32370 commit 787e4305a05e344c018abb872f788749203690d7
32371 Author: Bdale Garbee <bdale@gag.com>
32372 Date: Sat Aug 20 09:24:29 2011 -0600
32374 update changelogs for Debian build
32376 commit 605627d03eeb9f34026a84134992ad061b5b3946
32377 Author: Bdale Garbee <bdale@gag.com>
32378 Date: Fri Aug 19 22:47:50 2011 -0600
32380 update changelogs for Debian build
32382 commit 048b3eb45169e572f33c68ff152b89db9ef97d31
32383 Author: Keith Packard <keithp@keithp.com>
32384 Date: Sun Aug 14 21:11:41 2011 -0700
32386 altosui: Add 'On-board Data Logging' indicator to pad tab
32388 This shows whether the on-board data memory is full, or is ready to
32389 record the flight. This is indicated in the telemetry stream by a
32390 flight number of '0'.
32392 Signed-off-by: Keith Packard <keithp@keithp.com>
32394 commit adb7d345963ab9981c49c7cc68c6b4d7156dce46
32395 Author: Keith Packard <keithp@keithp.com>
32396 Date: Sun Aug 14 21:09:42 2011 -0700
32398 altosui: Ancient log files used 'apogee' for 'coast' state
32400 2009-07-18-serial-004-flight-000 says 'apogee' for the apogee-detect
32401 phase of the flight; map this to coast so that this flight replays
32402 correctly (although the log terminates at apogee...)
32404 Signed-off-by: Keith Packard <keithp@keithp.com>
32406 commit 4f64d66295a8f76680af8cfda4650aa4c4f8576d
32407 Author: Keith Packard <keithp@keithp.com>
32408 Date: Sun Aug 14 19:19:50 2011 -0700
32410 altos: Lost change that reported flight 0 when log memory was full
32412 commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a added coded to check
32413 for a full flight log and complain with a special tone.
32415 It also reported flight 0 over telemetry, and that part of the patch
32416 got lost when moving to the new telemetry format. This patch
32417 resurrects that piece.
32419 Signed-off-by: Keith Packard <keithp@keithp.com>
32421 commit ef7f60df841f1eb22b9cec0d7f68cf2c003d6b30
32422 Author: Keith Packard <keithp@keithp.com>
32423 Date: Sun Aug 14 00:00:54 2011 -0700
32425 altosui: Respect storage limits in flight log max config
32427 Compute the maximum flight log using the data returned from the 'f'
32428 command (total storage and erase block size). Limit menu to choices
32429 which fall within this limit, complain if the user asks for too big a value.
32431 Signed-off-by: Keith Packard <keithp@keithp.com>
32433 commit 746d6a472a20243a8c0eacc8edf8e81e0641bc17
32434 Author: Keith Packard <keithp@keithp.com>
32435 Date: Sun Aug 14 00:00:07 2011 -0700
32437 altosui: don't set channel when using radio setting
32439 altos now sets the radio back to channel 0 when the radio setting is
32442 Signed-off-by: Keith Packard <keithp@keithp.com>
32444 commit 709485f20fb039f8dd087c8491c5f5a76718ae53
32445 Author: Keith Packard <keithp@keithp.com>
32446 Date: Sat Aug 13 23:58:03 2011 -0700
32448 altos: use raw height while waiting for landing
32450 This avoids any noise introduced by the kalman filter, making landing
32451 detection much more reliable. This patch also changes the interval to
32452 10s so that the height bounds can be increased to 4m.
32454 Signed-off-by: Keith Packard <keithp@keithp.com>
32456 commit aa71c2cdcb417eba2a2d30792ece9a47b8b3fc82
32457 Author: Keith Packard <keithp@keithp.com>
32458 Date: Sat Aug 13 23:56:55 2011 -0700
32460 altos: Reset radio channel to zero when using radio setting
32462 Otherwise, it's hard to set the frequency over the radio link.
32464 Signed-off-by: Keith Packard <keithp@keithp.com>
32466 commit 7f74761051f2a5ab45b82c4dd79a8569376bbe2e
32467 Author: Keith Packard <keithp@keithp.com>
32468 Date: Sat Aug 13 23:56:06 2011 -0700
32470 altos: Correct AO_CONFIG_MINOR from 6 to 7
32472 Forgot to bump this when adding radio setting.
32474 Signed-off-by: Keith Packard <keithp@keithp.com>
32476 commit 924d56a4d2d8b16530cd378b18cfc5d6e08420ed
32477 Author: Keith Packard <keithp@keithp.com>
32478 Date: Sat Aug 13 21:10:15 2011 -0700
32480 altos: AltosSerial.flush_input shouldn't discard Interrupted exceptions
32482 The eeprom download code wants to interrupt serial communication so
32483 that it can stop downloading stuff in the middle of a run. Make
32484 flush_input pass the exception along instead of discarding it.
32486 Signed-off-by: Keith Packard <keithp@keithp.com>
32488 commit dcd15032eec45f3fdd003050710ebd5b85052662
32489 Author: Keith Packard <keithp@keithp.com>
32490 Date: Sat Aug 13 21:09:19 2011 -0700
32492 altosui: Eliminate inter-chunk flush_input calls
32494 Once the serial line is nicely synchronized, we don't need to flush
32495 input between chunks. This speeds up eeprom downloading quite a bit.
32497 Signed-off-by: Keith Packard <keithp@keithp.com>
32499 commit 3ba7b6196f68078f4ed4538c4e7fe30699dfe908
32500 Author: Keith Packard <keithp@keithp.com>
32501 Date: Sat Aug 13 21:05:46 2011 -0700
32503 altosui: Devices with log-format can also delete flights
32505 Any device with either flight-log-max or log-format can delete flights.
32507 Signed-off-by: Keith Packard <keithp@keithp.com>
32509 commit 03e201e1acc8742399054e4ad36b533120ea1612
32510 Author: Keith Packard <keithp@keithp.com>
32511 Date: Sat Aug 13 18:39:35 2011 -0700
32513 altosui: Add support for TeleScience eeprom download
32515 Using the existing eeprom methods, fetch and save TeleScience eeprom
32516 data, storing to a filename generated from the serial/flight from the
32517 TM connected to the TS board.
32519 Signed-off-by: Keith Packard <keithp@keithp.com>
32521 commit 5a3e96bef31959a287b8696778d7d8cf911a7dc4
32522 Author: Keith Packard <keithp@keithp.com>
32523 Date: Sat Aug 13 18:36:18 2011 -0700
32525 altosui: Clean up eeprom parsing a bit
32527 Export basic parsing and checksum functions for shared use.
32528 Create 'erased' function to check a chunk of eeprom data for data.
32530 Signed-off-by: Keith Packard <keithp@keithp.com>
32532 commit b0ec30de37aa822ba66d25ceaa8cf8dc967b4371
32533 Author: Keith Packard <keithp@keithp.com>
32534 Date: Sat Aug 13 18:31:08 2011 -0700
32536 altos: wait 10s for companion to boot
32538 In case the companion is delayed while booting, retry the setup 10
32539 times with a 1s delay between tries.
32541 Signed-off-by: Keith Packard <keithp@keithp.com>
32543 commit 41e5be32819d305c8268e6f992be91411ea13435
32544 Author: Keith Packard <keithp@keithp.com>
32545 Date: Sat Aug 13 18:30:00 2011 -0700
32547 altos: Send serial/flight to companion board
32549 Lets the companion log them for later matching with TeleMetrum log
32551 Signed-off-by: Keith Packard <keithp@keithp.com>
32553 commit fa7dd04741bf3fd9cedc59ed3b45b69ef9312609
32554 Author: Keith Packard <keithp@keithp.com>
32555 Date: Fri Aug 12 21:41:25 2011 -0700
32557 altos: Send SPI message at flight state changes
32559 Get the companion board starting its data logging as soon as possible
32560 after boost starts.
32562 Signed-off-by: Keith Packard <keithp@keithp.com>
32564 commit c7f540330c040c521f9d7626009a406e704a5e41
32565 Author: Keith Packard <keithp@keithp.com>
32566 Date: Fri Aug 12 14:58:34 2011 -0700
32568 altosui: Add companion support to the flight UI and CSV conversion
32570 Shows the companion data in a new tab. Also put companion data into
32573 Signed-off-by: Keith Packard <keithp@keithp.com>
32575 commit 18369c58e62bc64b969a7cf8be3103aa33c6d4aa
32576 Author: Keith Packard <keithp@keithp.com>
32577 Date: Fri Aug 12 06:29:13 2011 -0700
32579 altos: Check for companion init packet validity was busted
32581 Was using board_id == ~board_id instead of board_id ==
32584 Signed-off-by: Keith Packard <keithp@keithp.com>
32586 commit aa642cf55c43188e9a21198d828d7ea90ff54280
32587 Author: Keith Packard <keithp@keithp.com>
32588 Date: Fri Aug 12 05:42:05 2011 -0700
32590 altos: add the 'L' command to show the status of a linked companion board
32592 This prints out whether there is a board connected, along with the
32593 various values fetched from it.
32595 Signed-off-by: Keith Packard <keithp@keithp.com>
32597 commit f87f0787fa5aa528674f3f4919eb22646c87c25a
32598 Author: Keith Packard <keithp@keithp.com>
32599 Date: Fri Aug 12 05:41:15 2011 -0700
32601 altos: Make sure companion task exits cleanly when done
32603 Signed-off-by: Keith Packard <keithp@keithp.com>
32605 commit ebe2ffb29944abc4d6a35889c7b5f3d9f2871077
32606 Author: Keith Packard <keithp@keithp.com>
32607 Date: Fri Aug 12 05:38:16 2011 -0700
32609 altos: Put SPI in slower mode when talking to companion board
32611 The AVR CPU on the other side just can't go very fast. This reduces
32612 the SPI clock by a factor of 16, just under 200kHz. As the companion
32613 commands are reasonably short, this shouldn't have a huge effect on
32614 overall SPI utilization.
32616 Signed-off-by: Keith Packard <keithp@keithp.com>
32618 commit 30abbdc7ffcfc809b4a3fc31486fe968161ea225
32619 Author: Keith Packard <keithp@keithp.com>
32620 Date: Sat Jul 9 16:59:16 2011 -0700
32622 altos: Add SPI-based companion board support
32624 This sends current flight state information and retrieves companion
32625 data to include in telemetry.
32627 Signed-off-by: Keith Packard <keithp@keithp.com>
32629 commit 578c4b17b8f62f2727654ebda78ee139f9fe13fa
32630 Author: Keith Packard <keithp@keithp.com>
32631 Date: Sat Aug 13 18:38:38 2011 -0700
32633 altos: Don't try to use non-basestations for remote eeprom download
32635 Companion boards may also have eeprom data to fetch; don't try to use
32638 Signed-off-by: Keith Packard <keithp@keithp.com>
32640 commit bf06af154e232d4caa1585a1d6d5279a075292e4
32641 Author: Keith Packard <keithp@keithp.com>
32642 Date: Fri Aug 12 21:43:56 2011 -0700
32644 altos/altosui: Report log format in the version command
32646 This will make it easier to figure out what the contents of the flash
32647 should look like from altosui; the current 'guessing' mechanism will
32648 not scale to many more formats.
32650 Signed-off-by: Keith Packard <keithp@keithp.com>
32652 commit c2f2f519dbc8ce233ab36222088c1be6b1362f01
32653 Author: Keith Packard <keithp@keithp.com>
32654 Date: Sat Aug 13 18:28:38 2011 -0700
32656 altos: re-write a bit of GPS parsing code to reduce size
32658 Use a local variable while computing hdop.
32659 Place the next incoming character in data instead of pdata.
32661 Saved a surprising amount of memory.
32663 Signed-off-by: Keith Packard <keithp@keithp.com>
32665 commit 7bcf25606cd5892d58295649f3d475d284494ee8
32666 Author: Keith Packard <keithp@keithp.com>
32667 Date: Fri Aug 12 05:26:09 2011 -0700
32669 altos: shrink text space from ao_config.c
32671 Eliminate redundant config initializers by setting minor to zero and
32672 letting upgrade code handle all of the new values.
32674 Stop computing (fake) frequency when showing radio channel
32675 Stop computing feet when showing main deploy height
32677 Signed-off-by: Keith Packard <keithp@keithp.com>
32679 commit 313d740b5284b24f1cc7a1ba5779136b55d49ebe
32680 Author: Keith Packard <keithp@keithp.com>
32681 Date: Sat Aug 13 18:33:07 2011 -0700
32683 libaltos: Mis-allocated device list in libaltos
32685 Would overrun mis-allocated array, causing chaos.
32687 Signed-off-by: Keith Packard <keithp@keithp.com>
32689 commit 3b87dd6f46922cf5f98deb2dffa2148c4244e48e
32690 Author: Keith Packard <keithp@keithp.com>
32691 Date: Sat Aug 13 15:00:14 2011 -0700
32693 ao-tools: ao-list was crashing with more than 3 devices connected
32695 the list of devices was getting realloced for each new device, but
32696 that realloc was too small.
32698 Signed-off-by: Keith Packard <keithp@keithp.com>
32700 commit 640422c028a2be898aa3a9048a0f6fad2e43dd8d
32701 Author: Keith Packard <keithp@keithp.com>
32702 Date: Thu Aug 11 16:11:34 2011 -0700
32704 altos: remove monitor disable stubs from altimeter code
32706 Monitor mode in the ground-station boards must be disabled when the
32707 radio is going to be used for another purpose, or the radio parameters
32708 changed. That places monitor-mode disable calls in other parts of the
32709 system which are shared with the altimeter code.
32711 Elide the ao_set_monitor calls for builds which do not include any
32714 Signed-off-by: Keith Packard <keithp@keithp.com>
32716 commit 1d13460412046c53f36466193329caaa657bb278
32717 Author: Keith Packard <keithp@keithp.com>
32718 Date: Thu Aug 11 15:59:47 2011 -0700
32720 altos: Apply igniter boot pulse-width reduction to telemini
32722 TeleMini needs the same fix as TeleMetrum to reduce startup igniter
32725 Signed-off-by: Keith Packard <keithp@keithp.com>
32727 commit b520c32bcddabd42c07ceafa827694a3ae23a76f
32728 Author: Keith Packard <keithp@keithp.com>
32729 Date: Thu Aug 11 15:57:58 2011 -0700
32731 altos: Pull igniter pins low as soon as possible at boot time
32733 This reduces the pulse width on the igniter circuit caused by the
32734 default cc1111 pin configuration at powerup time.
32736 Signed-off-by: Keith Packard <keithp@keithp.com>
32738 commit 566b16e67be38c6425e616a5c38d641c4e1a9b12
32739 Author: Keith Packard <keithp@keithp.com>
32740 Date: Wed Aug 10 22:43:26 2011 -0700
32742 doc: Add 1.0 release notes.
32744 Signed-off-by: Keith Packard <keithp@keithp.com>
32746 commit a07b07d48f71b9a11e73a82db075cc57bad0c09f
32747 Author: Keith Packard <keithp@keithp.com>
32748 Date: Wed Aug 10 22:14:32 2011 -0700
32750 doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrum
32752 This adds release notes and includes them in the main altusmetrum doc
32753 as well as making stand-alone html available for inclusion in the website.
32755 Signed-off-by: Keith Packard <keithp@keithp.com>
32757 commit 5aa3e49f794ba5ed2680016f3dca47d67ae99836
32758 Author: Keith Packard <keithp@keithp.com>
32759 Date: Wed Aug 10 18:32:05 2011 -0700
32761 doc: Add telemetry docs to debian/linux/mac/windows packages
32763 Signed-off-by: Keith Packard <keithp@keithp.com>
32765 commit 7283deaa91e752acc45018ef2ea2f560b09af354
32766 Author: Keith Packard <keithp@keithp.com>
32767 Date: Wed Aug 10 18:22:16 2011 -0700
32769 doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.
32771 Signed-off-by: Keith Packard <keithp@keithp.com>
32773 commit 21837e0026c87635abf4baf2c6c574a7b274f449
32774 Author: Keith Packard <keithp@keithp.com>
32775 Date: Wed Aug 10 18:14:10 2011 -0700
32777 doc: Document Ignite Mode and Pad Orientation configuration options
32779 Signed-off-by: Keith Packard <keithp@keithp.com>
32781 commit 967c9d5ee691f87bf0d1e49ba055eb366e513e6a
32782 Author: Keith Packard <keithp@keithp.com>
32783 Date: Wed Aug 10 17:43:58 2011 -0700
32785 doc: Update altusmetrum.xsl for v1.0 software and TeleMini
32787 Add TeleMini references and sections as appropriate, update AltosUI
32788 docs to describe new bits.
32790 Signed-off-by: Keith Packard <keithp@keithp.com>
32792 commit be65308182363ca87db69db530297933324f3806
32793 Author: Keith Packard <keithp@keithp.com>
32794 Date: Wed Aug 10 16:01:25 2011 -0700
32796 Bump version to 0.9.6.0
32798 Signed-off-by: Keith Packard <keithp@keithp.com>
32800 commit 9f5623c8c32a38eaeb63fa74ab370025ac015d52
32801 Author: Keith Packard <keithp@keithp.com>
32802 Date: Wed Aug 10 15:00:44 2011 -0700
32804 altosui: Move launch-sites.txt file to altusmetrum.org
32806 The official URL is now:
32808 http://www.altusmetrum.org/AltOS/launch-sites.txt
32810 Signed-off-by: Keith Packard <keithp@keithp.com>
32812 commit 4962bcf1ce15c21a946ea718bd676b901f0f2bd0
32813 Author: Keith Packard <keithp@keithp.com>
32814 Date: Wed Aug 10 14:35:21 2011 -0700
32816 altosui: Plot reasonable data from Tm files
32818 Don't plot acceleration based on baro data.
32819 Display baro speed if accel speed isn't available.
32821 Signed-off-by: Keith Packard <keithp@keithp.com>
32823 commit 01b9352eb8ca0e4e2d023ce973c4e863cdcc0c51
32824 Author: Keith Packard <keithp@keithp.com>
32825 Date: Wed Aug 10 14:34:39 2011 -0700
32827 altosui: Prune telemetry file graphs to just the flight
32829 Remove data earlier than 1 second before boost and data after landing.
32831 Signed-off-by: Keith Packard <keithp@keithp.com>
32833 commit 9e1487b1a5db0afd1d23c86d82c60b1c1a62aab0
32834 Author: Keith Packard <keithp@keithp.com>
32835 Date: Wed Aug 10 14:08:21 2011 -0700
32837 altosui: Add a 'Graph Flight' button to the 'landed' tab
32839 This lets you see the results of a flight as soon as the rocket lands
32840 using the telemetry data.
32842 Signed-off-by: Keith Packard <keithp@keithp.com>
32844 commit 6ac604d11de44cd824f09e4b467264a2b74be7bd
32845 Author: Keith Packard <keithp@keithp.com>
32846 Date: Wed Aug 10 13:35:26 2011 -0700
32848 Altosui: Add flight statistics tab to graph window
32850 Provide basic flight stats alongside the flight graph.
32852 Signed-off-by: Keith Packard <keithp@keithp.com>
32854 commit 94d9a2c36fabdf24d6a0b985851e95e4eb181fd9
32855 Author: Keith Packard <keithp@keithp.com>
32856 Date: Tue Aug 9 18:28:19 2011 -0700
32858 altosui: Ship TeleMini v1.0 firmware with fat blobs
32860 Signed-off-by: Keith Packard <keithp@keithp.com>
32862 commit a680ce61bdcffeacb7f0e4dcef71a03cb7cfe07d
32863 Author: Keith Packard <keithp@keithp.com>
32864 Date: Tue Aug 9 18:27:19 2011 -0700
32866 altosui: Ensure serial code tracks reply nesting correctly
32868 Trap any exceptional return conditions from 'get_reply' to make sure
32869 in_reply gets decremented.
32871 Signed-off-by: Keith Packard <keithp@keithp.com>
32873 commit 12bfa6cc42e3689f09abae2bd2584cbacf2aa2e0
32874 Author: Keith Packard <keithp@keithp.com>
32875 Date: Tue Aug 9 18:26:07 2011 -0700
32877 altosui: Don't export product defs from libaltos
32879 As we add new products, that would change the ABI generated for java,
32880 invaliding old library versions sitting around for windows and mac.
32882 Signed-off-by: Keith Packard <keithp@keithp.com>
32884 commit 81ad44d4b6d9ad2f6b91d0906e8543da82da424f
32885 Author: Keith Packard <keithp@keithp.com>
32886 Date: Tue Aug 9 14:26:43 2011 -0700
32888 altos: Switch telemini from v0.1 to v1.0
32890 TeleMini production boards are firmware compatible with the v0.1
32891 design, so instead of creating another product, just rename the
32894 Signed-off-by: Keith Packard <keithp@keithp.com>
32896 commit f3985ef8bc69bcec13ce155567a8ed7c5c6051cb
32897 Author: Keith Packard <keithp@keithp.com>
32898 Date: Mon Aug 8 20:41:34 2011 -0700
32900 altosui: Add close button to 'fire' dialog
32902 Easier to hit than the tiny close box in the frame.
32904 Signed-off-by: Keith Packard <keithp@keithp.com>
32906 commit cbf54a826d12c49b1b1996be247869d5ff4e2236
32907 Author: Keith Packard <keithp@keithp.com>
32908 Date: Mon Aug 8 20:38:44 2011 -0700
32910 altosui: Make set of telemetries to use while scanning configurable
32912 with a preference to remember across application runs.
32914 Signed-off-by: Keith Packard <keithp@keithp.com>
32916 commit 7146311d9df541e075b4450cf9656a9aa7ffdd93
32917 Author: Keith Packard <keithp@keithp.com>
32918 Date: Mon Aug 8 20:38:14 2011 -0700
32920 altosui: Reading serial from swing thread only bad if remote
32922 Make the warning on this condition based on whether the link is remote.
32924 Signed-off-by: Keith Packard <keithp@keithp.com>
32926 commit 2662c577a895c96fce7b2bf815b9e752d2dfbde6
32927 Author: Keith Packard <keithp@keithp.com>
32928 Date: Mon Aug 8 18:53:59 2011 -0700
32930 altosui: Remove unused AltosConfigData from AltosTelemetryReader
32932 Now that AltosSerial manages this data, it's not needed here.
32934 Signed-off-by: Keith Packard <keithp@keithp.com>
32936 commit 13eacb49de4312509c3a729a31dcda4d601f8a8b
32937 Author: Keith Packard <keithp@keithp.com>
32938 Date: Mon Aug 8 18:53:27 2011 -0700
32940 altosui: Flush radio setting to serial device
32942 When changing frequencies, make sure the device hears about it.
32944 Signed-off-by: Keith Packard <keithp@keithp.com>
32946 commit 97cf285d041062ae473c2823438b81c8fffe7f67
32947 Author: Keith Packard <keithp@keithp.com>
32948 Date: Mon Aug 8 18:53:03 2011 -0700
32950 altosui: Remove debugging printfs from AltosSerial
32952 Signed-off-by: Keith Packard <keithp@keithp.com>
32954 commit 364102d29ff4de0c252774f26417587fa88b7467
32955 Author: Keith Packard <keithp@keithp.com>
32956 Date: Mon Aug 8 18:52:11 2011 -0700
32958 altosui: Show AltosFrequency in scan results
32960 Include frequency and description instead of just frequency.
32962 Signed-off-by: Keith Packard <keithp@keithp.com>
32964 commit d4cc16e111229b02d1081e2693ace0b33f662498
32965 Author: Keith Packard <keithp@keithp.com>
32966 Date: Mon Aug 8 18:51:16 2011 -0700
32968 altosui: Save frequency after setting it in AltosFlightUI
32970 Otherwise we'll just save the old frequency.
32972 Signed-off-by: Keith Packard <keithp@keithp.com>
32974 commit 81bb6f42d8b859195ea5a35806c42d98ba82e8e1
32975 Author: Keith Packard <keithp@keithp.com>
32976 Date: Mon Aug 8 18:49:45 2011 -0700
32978 altosui: Have single radio_to_frequency function
32980 This takes all three radio params (setting, cal, channel) and computes
32981 the current frequency.
32983 Signed-off-by: Keith Packard <keithp@keithp.com>
32985 commit c8c01684fa011acf3bbe5c3ebbc84aa8e8457a5e
32986 Author: Keith Packard <keithp@keithp.com>
32987 Date: Mon Aug 8 18:47:36 2011 -0700
32989 altosui: A few misc cleanups.
32991 Initialize radio_setting as it won't be set for older devices ever.
32992 Remove unused set_radio_frequency function from AltosConfigUI.
32994 Signed-off-by: Keith Packard <keithp@keithp.com>
32996 commit dd383b86b9a13d7af2d6b07f4fb85ccc666ed898
32997 Author: Keith Packard <keithp@keithp.com>
32998 Date: Mon Aug 8 18:45:36 2011 -0700
33000 altosui: Must set radio calibration before radio setting
33002 Setting the radio calibration erases any previous radio setting as
33003 the radio calibration change invalidates any previously computed radio
33004 setting for a specific frequency.
33006 Hence, the radio setting must be configured *after* the radio
33007 calibration value lest it be ignored.
33009 Signed-off-by: Keith Packard <keithp@keithp.com>
33011 commit 40544dbfe09c64f7764a5f0686415805611fab25
33012 Author: Keith Packard <keithp@keithp.com>
33013 Date: Mon Aug 8 17:46:04 2011 -0700
33015 altos: minor type in comment about accel correction
33017 Kurt Roeckx found a typo in the equations describing how the
33018 accelerometer is corrected by the 5V reference measurement.
33020 Signed-off-by: Keith Packard <keithp@keithp.com>
33022 commit a315b200cd0da1a964f5395cd59660be1b49672b
33023 Author: Keith Packard <keithp@keithp.com>
33024 Date: Mon Aug 8 12:31:48 2011 -0700
33026 altosui: Pull out BlueTooth support
33028 This leaves the code in place, but commented out so that it isn't used
33029 until we've got a bluetooth device ready for use.
33031 Signed-off-by: Keith Packard <keithp@keithp.com>
33033 commit a65daf94e8fe3e22f770ef76d9104c3dd11d0330
33034 Author: Keith Packard <keithp@keithp.com>
33035 Date: Mon Aug 8 12:25:30 2011 -0700
33037 altosui: altimeter is not spelled altimter
33039 Signed-off-by: Keith Packard <keithp@keithp.com>
33041 commit 84ba927f503f81543dec286c4881be30bb5e60c5
33042 Author: Keith Packard <keithp@keithp.com>
33043 Date: Mon Aug 8 02:05:28 2011 -0700
33045 Set version to 0.9.5.0
33047 Make the frequency-based systems distinct
33049 Signed-off-by: Keith Packard <keithp@keithp.com>
33051 commit 0e3e4f9c1e6a6bf972514f12c9d622258aa2aec2
33052 Author: Keith Packard <keithp@keithp.com>
33053 Date: Mon Aug 8 01:47:29 2011 -0700
33055 altosui: Convert from channels to frequencies
33059 * Preferences are stored as frequencies instead
33062 * Serial configuration is done using frequencies
33064 * UI is presented with frequency lists
33066 Signed-off-by: Keith Packard <keithp@keithp.com>
33068 commit f03ca0ab8799bfa5100eaa2577cfd7b9c37d05bf
33069 Author: Keith Packard <keithp@keithp.com>
33070 Date: Sun Aug 7 14:52:29 2011 -0700
33072 altosui: Add dialogs to configure 'common' frequencies
33074 These are stored in preferences, but not yet hooked up to the TM/TD
33077 Signed-off-by: Keith Packard <keithp@keithp.com>
33079 commit ba5dc35388d28c5769eaabc970c4d4b8c2c2ff9c
33080 Author: Keith Packard <keithp@keithp.com>
33081 Date: Wed Aug 3 23:07:53 2011 -0700
33083 altos: Add ability to set arbitrary radio frequency
33085 This adds a separate config parameter to control the raw radio
33086 frequency setting, allowing the user to select an arbitrary frequency
33087 instead of being forced to choose one of the 10 pre-defined 'channels'.
33089 Signed-off-by: Keith Packard <keithp@keithp.com>
33091 commit e1e5c9b3e24670e9f58c6f7389eafb3338efdb40
33092 Author: Keith Packard <keithp@keithp.com>
33093 Date: Mon Aug 8 12:08:45 2011 -0700
33095 altos: Remove pad_orientation functions from non-accel devices
33097 Anything without an accelerometer can't detect pad orientation.
33099 Signed-off-by: Keith Packard <keithp@keithp.com>
33101 commit 7207a95823dc2a27906759528dd88256cb20679f
33102 Author: Keith Packard <keithp@keithp.com>
33103 Date: Mon Aug 8 12:04:00 2011 -0700
33105 altosui: Change button to 'Configure Altimeter'
33107 Now that we've got more than one model.
33109 Signed-off-by: Keith Packard <keithp@keithp.com>
33111 commit 30670732ca3f5a34025ab4bc4c69afa45637b4d6
33112 Author: Keith Packard <keithp@keithp.com>
33113 Date: Mon Aug 8 11:58:23 2011 -0700
33115 altos: Correct flight log max on Tm to 5k
33117 Was using the wrong #define name to check for Tm/Tn devices that use
33118 internal flash for data storage.
33120 Signed-off-by: Keith Packard <keithp@keithp.com>
33122 commit a67c16958df8e60b131b01e00fd5bca590af0e7d
33123 Author: Bdale Garbee <bdale@gag.com>
33124 Date: Mon Aug 8 09:38:53 2011 -0600
33126 update changelogs for Debian build
33128 commit 4a507898d6de631bb2e8ed4aa3e0933d97222323
33129 Author: Bdale Garbee <bdale@gag.com>
33130 Date: Mon Aug 8 09:34:59 2011 -0600
33132 rewind changelog for re-build of 0.9.4.5
33134 commit 5082b4998b8a9787e0e2f4d96d912e434aa9b81a
33135 Author: Bdale Garbee <bdale@gag.com>
33136 Date: Mon Aug 8 09:31:18 2011 -0600
33138 clean up all existing lintian warnings
33140 commit f26c7172a1b2b5344fae6ede562f2da7a56b80e3
33141 Author: Bdale Garbee <bdale@gag.com>
33142 Date: Mon Aug 8 07:54:14 2011 -0600
33144 build depend on bluetooth dev package
33146 commit 3cad81b0ebb52352c66643a2587e94a2b693a2d2
33147 Author: Bdale Garbee <bdale@gag.com>
33148 Date: Mon Aug 8 07:38:48 2011 -0600
33150 stop doing automatic tag push during builds
33152 commit ebaad64525119c0fdacf382adc2c99e5df5be23f
33153 Author: Bdale Garbee <bdale@gag.com>
33154 Date: Mon Aug 8 07:37:23 2011 -0600
33156 update changelogs for Debian build
33158 commit 6f9f75cbfccf975204ab847ca0e9cf86188716c6
33159 Author: Bdale Garbee <bdale@gag.com>
33160 Date: Mon Aug 8 07:35:47 2011 -0600
33162 update changelogs for Debian build
33164 commit 7c94945690a6ff5cbf872026fd6411a30089c7b1
33165 Author: Bdale Garbee <bdale@gag.com>
33166 Date: Mon Aug 8 07:33:09 2011 -0600
33168 simplify version in last changelog entry so git-dch is less confused
33170 commit 6d5e5b0be237d5448aa9d15decd6127cf41ca7b2
33171 Author: Bdale Garbee <bdale@gag.com>
33172 Date: Mon Aug 8 07:30:42 2011 -0600
33174 update version for a Bdale build for use turning on TeleMini v1.0
33176 commit 6492218fc316f8cf6214a577807a8dd0a80a9b6a
33177 Author: Keith Packard <keithp@keithp.com>
33178 Date: Tue Aug 2 19:07:56 2011 -0700
33180 altos/altosui: Add pad orientation configure option
33182 Allow TeleMetrum to be operated with the antenna pointing downwards on
33183 the pad. This provides some additional flexibility when designing an
33186 The accelerometer calibration levels are flipped around to match, so
33187 no re-calibration should be required.
33189 Signed-off-by: Keith Packard <keithp@keithp.com>
33191 commit 11a2bb8e28df7ed87542f2ee726f877971f5d52a
33192 Author: Keith Packard <keithp@keithp.com>
33193 Date: Tue Aug 2 17:41:53 2011 -0700
33195 altosui: Add idle monitor dialog
33197 This monitors a telemetrum device in idle mode, either directly or through a
33198 teledongle, allowing the GPS status and batteries to be monitored
33199 without resorting to placing the device in pad mode.
33201 Signed-off-by: Keith Packard <keithp@keithp.com>
33203 commit 3cc2eed6cdafe788a8617ab45c6664077e76411e
33204 Author: Keith Packard <keithp@keithp.com>
33205 Date: Tue Aug 2 18:01:52 2011 -0700
33207 altosui: Simple timeouts don't work with query data
33209 To get the query to come back, it's best to abort and retry the
33210 command, other wise the command may have been lost to the previous
33213 Signed-off-by: Keith Packard <keithp@keithp.com>
33215 commit 37c41c962ea4631e62307a57d2ce6572b87fd743
33216 Author: Keith Packard <keithp@keithp.com>
33217 Date: Tue Aug 2 17:41:02 2011 -0700
33219 altosui: Parse accel cal from 'c s' command
33221 These fields weren't used before, so the code to parse them hadn't
33224 Signed-off-by: Keith Packard <keithp@keithp.com>
33226 commit 95201e7fe4a6a7ec42321e8dbad3aea3bbf4c840
33227 Author: Keith Packard <keithp@keithp.com>
33228 Date: Tue Aug 2 17:40:02 2011 -0700
33230 altosui: Standard text field in flight UI needs more width (now 20)
33232 Latitude and longitude take more than 16 characters.
33234 Signed-off-by: Keith Packard <keithp@keithp.com>
33236 commit 82e04a0e3a3296288a524ec582785a36fd644331
33237 Author: Keith Packard <keithp@keithp.com>
33238 Date: Tue Aug 2 02:09:23 2011 -0700
33240 altos: Require sequencing through 'main' state before landing
33242 The old version of the code would permit the flight to go straight
33243 from 'drogue' to 'landed' without passing through 'main' at all. This
33244 meant that a false landing detection would leave the main charge
33245 unfired, potentially causing the airframe to land on drogue alone.
33247 Requiring that the flight sequence pass through main ensures that the
33248 main charge will get fired at the right time, although if the airframe
33249 lands higher than that altitude, it will not go to 'landed' mode ever.
33251 Signed-off-by: Keith Packard <keithp@keithp.com>
33253 commit 6c55bf35b11ae3ddae152795072d69e98184bac1
33254 Author: Keith Packard <keithp@keithp.com>
33255 Date: Tue Aug 2 01:49:35 2011 -0700
33257 altos: Reduce height averaging filter time constant
33259 Using the longer time constant could lead to false landing detection
33260 just after apogee, which is definitely not a good idea.
33262 Signed-off-by: Keith Packard <keithp@keithp.com>
33264 commit e19a117b99e8374ca0e8e35948e23bc672ad1a32
33265 Author: Keith Packard <keithp@keithp.com>
33266 Date: Mon Aug 1 22:33:38 2011 -0700
33268 altos: Average height values for landing detection
33270 Instead of using the direct output of the kalman filter and hoping
33271 that is quiet enough to detect landing, filter that with a long
33272 exponential decay filter and then check to make sure that doesn't
33273 change more than 2m in 5 seconds as a trigger for landing detection.
33275 Tested with existing telemetrum flight logs and it correctly detects
33276 landing in all cases.
33278 Signed-off-by: Keith Packard <keithp@keithp.com>
33280 commit 146a0ab223e8d9b376125d1e59f597f6d7851a9b
33281 Author: Keith Packard <keithp@keithp.com>
33282 Date: Sun Jul 17 18:49:55 2011 -0700
33284 altos: Add ability to read new TELEM files to ao_flight_test
33286 Not that telem files are currently very useful as the kalman filter
33287 gets completly confused by the variable steps caused by missing data, but...
33289 Signed-off-by: Keith Packard <keithp@keithp.com>
33291 commit 6795d353be91df96a571cebc237e6a54a065a380
33292 Author: Keith Packard <keithp@keithp.com>
33293 Date: Sun Jul 17 16:44:10 2011 -0700
33295 altosui: Change continutity colors to yellow/magenta
33297 Makes them stand apart from the accel/speed lines
33299 Signed-off-by: Keith Packard <keithp@keithp.com>
33301 commit 7f6cce5749724dbb836aaa27bbeedf977106f6f3
33302 Author: Keith Packard <keithp@keithp.com>
33303 Date: Sun Jul 17 16:43:41 2011 -0700
33305 Add HARA Bragg Farms site
33307 Signed-off-by: Keith Packard <keithp@keithp.com>
33309 commit 6796d9e253a808824ba32cdb008da8bf302780fc
33310 Author: Keith Packard <keithp@keithp.com>
33311 Date: Sun Jul 17 15:53:13 2011 -0700
33313 Fix NCR Pawnee location
33315 Signed-off-by: Keith Packard <keithp@keithp.com>
33317 commit ddef3e4ec1b3ff86b164f83807c34c2a78f73eb8
33318 Author: Keith Packard <keithp@keithp.com>
33319 Date: Sun Jul 17 15:45:07 2011 -0700
33321 altosui: Mark preload site location with red circles (like launch)
33323 Just to show where on the map the official launch location is.
33325 Signed-off-by: Keith Packard <keithp@keithp.com>
33327 commit 1f3f3d575572eff33a2bc7a53d4691e59a428450
33328 Author: Keith Packard <keithp@keithp.com>
33329 Date: Sun Jul 17 15:09:55 2011 -0700
33331 altosui: Add a bunch more site locations
33333 BALLS, Rio Rancho, METRA, QRS Cedar Grove and Hudson Ranch
33335 Signed-off-by: Keith Packard <keithp@keithp.com>
33337 commit fef42e0d9e0a20bdbd32e052749fc63575515e1c
33338 Author: Keith Packard <keithp@keithp.com>
33339 Date: Sun Jul 17 11:29:13 2011 -0700
33341 altosui: Add launch-sites.txt
33343 Contains a few of our favorites.
33345 Signed-off-by: Keith Packard <keithp@keithp.com>
33347 commit 81cac174c80ee42d9e94c6500da7c4c760c3ce67
33348 Author: Keith Packard <keithp@keithp.com>
33349 Date: Sun Jul 17 11:25:47 2011 -0700
33351 altosui: Download list of site locations for map preloading
33353 The current URL for this is:
33354 http://gag.com/~keithp/launch-sites.txt
33357 <site-name>:<lat>:<lon>
33359 lat and lon are both in signed decimal degrees.
33361 Signed-off-by: Keith Packard <keithp@keithp.com>
33363 commit f7cd8317bf78ece334e1ceb0263b875ca43bbbd2
33364 Merge: 51796e2 a482d90
33365 Author: Keith Packard <keithp@keithp.com>
33366 Date: Sun Jul 17 08:17:44 2011 -0700
33368 Merge branch 'preload-maps'
33370 commit 51796e2f1ebce3ee8dc1ac90648381410c1379ee
33371 Author: Keith Packard <keithp@keithp.com>
33372 Date: Mon May 23 11:32:29 2011 -0700
33374 altos, altosui: Add igniter mode (dual, apogee, main)
33376 This provides for redundant charges for either apogee or main.
33378 Signed-off-by: Keith Packard <keithp@keithp.com>
33380 commit 1332ed55192f22525f31574f60fae4c6579e6f7f
33381 Author: Keith Packard <keithp@keithp.com>
33382 Date: Sun Jul 17 08:13:15 2011 -0700
33384 Set version to 0.9.4.4
33386 Signed-off-by: Keith Packard <keithp@keithp.com>
33388 commit a482d904a3f391c3a24df3660acb3f3696aa6766
33389 Author: Anthony Towns <aj@erisian.com.au>
33390 Date: Sat Jul 16 23:08:49 2011 -0700
33392 altosui: Make sure degree and minute values are visible (map preload)
33394 Set min size to preferred size so that the value remains visible
33395 instead of snapping to 0 pixels wide.
33397 Signed-off-by: Keith Packard <keithp@keithp.com>
33399 commit 1681c57cbbfc5214dbc2a519e54ce9f29ffe3921
33400 Author: Keith Packard <keithp@keithp.com>
33401 Date: Sat Jul 16 22:43:34 2011 -0700
33403 altosui: Remove a bunch of sitemap debugging printfs
33405 Seems to work, let's get less chatty
33407 Signed-off-by: Keith Packard <keithp@keithp.com>
33409 commit 0a4d934f6e2914bfe2d965630543f029a1576c11
33410 Author: Keith Packard <keithp@keithp.com>
33411 Date: Sat Jul 16 22:34:44 2011 -0700
33413 altosui: Display full map preload area in view.
33415 This involved fixing the map view to support arbitrary sizes, and then
33416 exposing a synchronous tile loading API so that the progress bar could
33417 be used to show tile loading progress.
33419 Signed-off-by: Keith Packard <keithp@keithp.com>
33421 commit abb8510b97ce9cbbff0275cc31f74780fe1ce138
33422 Merge: 0929ee3 00e6981
33423 Author: Keith Packard <keithp@keithp.com>
33424 Date: Sat Jul 16 21:06:37 2011 -0700
33426 Merge branch 'scan-telemetry' into preload-maps
33428 commit 00e6981c2e0a668864fcf391932855cd8942140c
33429 Author: Keith Packard <keithp@keithp.com>
33430 Date: Sat Jul 16 21:05:06 2011 -0700
33432 altosui: Flush telemetry lines before starting to watch for scan results
33434 This prevents pending telemetry lines from being incorrectly
33435 attributed to the wrong channel/telemetry.
33437 Signed-off-by: Keith Packard <keithp@keithp.com>
33439 commit 0929ee32f753255cbe1474988cb41a5a86d29a0e
33440 Author: Keith Packard <keithp@keithp.com>
33441 Date: Sat Jul 16 17:37:20 2011 -0700
33443 altosui: Try to avoid resize weirdness with map preloading
33445 grid bag + box does some strange stuff, this appears to avoid the
33446 worst of the interactions.
33448 Signed-off-by: Keith Packard <keithp@keithp.com>
33450 commit 225073fd822f9861a83d65386c29fda9b37bf273
33451 Author: Keith Packard <keithp@keithp.com>
33452 Date: Sat Jul 16 16:37:40 2011 -0700
33454 altosui: Add map preloading GUI
33456 Provide a way to manually enter latitude and longitude, preview the
33457 map area while downloading a 9x9 grid of map tiles to be used when
33458 monitoring flights without network access.
33460 Signed-off-by: Keith Packard <keithp@keithp.com>
33462 commit cbd14ba103ee5e3c5eec18e3a4ff13c320b98634
33463 Author: Keith Packard <keithp@keithp.com>
33464 Date: Sat Jul 16 20:44:51 2011 -0700
33466 altosui: Set 'seen' bits in legacy telemetry packet reader
33468 Otherwise, the 'scan' code won't show detected flight computers.
33470 Signed-off-by: Keith Packard <keithp@keithp.com>
33472 commit e905042879147dd86241bf2dcc7437e5a6eb7578
33473 Author: Keith Packard <keithp@keithp.com>
33474 Date: Sat Jul 16 20:43:57 2011 -0700
33476 altosui: Initialize channel and telemetry before use in ScanUI
33478 Otherwise we try to use telemetry format 0, which means 'no telemetry'.
33480 Signed-off-by: Keith Packard <keithp@keithp.com>
33482 commit 941b90a4905e34936d24a25ca90ac04eb6f5a792
33483 Author: Keith Packard <keithp@keithp.com>
33484 Date: Sat Jul 16 17:38:00 2011 -0700
33486 altosui: Generalize and centralize telemetry constants, parse v0.8 telemetry
33488 Move telemetry constants to Altos class, adding functions to compute
33489 names and lengths. Generalize users of these values to use all of the
33492 Add support for v0.8 TeleMetrum telemetry
33494 Signed-off-by: Keith Packard <keithp@keithp.com>
33496 commit 7ef786276b5d5c7d17c3fe4f36aa41db61a9742f
33497 Author: Keith Packard <keithp@keithp.com>
33498 Date: Sat Jul 16 14:23:08 2011 -0700
33500 altosui: Finish radio scanning UI
33502 Scans all channels and telemetry formats, presenting visible devices
33503 in a list. Entries from the list may be selected, in which case a
33504 monitor window pops up with the appropriate configuration.
33506 Signed-off-by: Keith Packard <keithp@keithp.com>
33508 commit ebcba28b3c09925869b617880d2919e5d0e059f0
33509 Author: Keith Packard <keithp@keithp.com>
33510 Date: Sat Jul 16 14:19:41 2011 -0700
33512 altosui: Configuration telemetry record includes flight number
33514 Mark the reported altos record as including flight information.
33516 Signed-off-by: Keith Packard <keithp@keithp.com>
33518 commit d4375bc737655546c2d40f49acdfc2e60ebfea5a
33519 Author: Keith Packard <keithp@keithp.com>
33520 Date: Sat Jul 16 14:19:14 2011 -0700
33522 altosui: Remove debugging printf from AltosLog
33524 Signed-off-by: Keith Packard <keithp@keithp.com>
33526 commit f32a55ac9a3ebbde2b41782f22491e72258fe05a
33527 Author: Keith Packard <keithp@keithp.com>
33528 Date: Sat Jul 9 19:00:12 2011 -0700
33530 altosui: Pop up monitor window from scan dialog
33532 Signed-off-by: Keith Packard <keithp@keithp.com>
33534 commit 8c20030ea4eb8e068e1ba88e01d07dfbc27bd7db
33535 Author: Keith Packard <keithp@keithp.com>
33536 Date: Sat Jul 9 18:41:15 2011 -0700
33538 altosui: Start adding support for scanning radio for available devices
33542 Signed-off-by: Keith Packard <keithp@keithp.com>
33544 commit 7bb11b716ccb6c80701bc3f34ecf9bef97cbbfc9
33545 Author: Keith Packard <keithp@keithp.com>
33546 Date: Fri Jul 15 18:53:41 2011 -0700
33548 Set version to 0.9.4.3 for Bdale 2011-7-16 flights
33550 Signed-off-by: Keith Packard <keithp@keithp.com>
33552 commit 0d0cf6f9a1b14a1b66aee3845964cd33d1f035c2
33553 Author: Keith Packard <keithp@keithp.com>
33554 Date: Sat Jul 9 13:09:57 2011 -0700
33556 altos: new versions of sdcc require __ prefixes for custom keywords
33558 Fortunately, 2.9.1 appears to accept either, so we can switch now and
33559 prepare for sdcc 3.0.0.
33561 Signed-off-by: Keith Packard <keithp@keithp.com>
33563 commit 8f80f5705d64469bcfb00ff11aee68364edb271b
33564 Author: Keith Packard <keithp@keithp.com>
33565 Date: Wed Jul 6 21:38:57 2011 -0700
33567 altosui: Don't show missing igniter and gps values
33569 The new telemetry stuff leaves state.gps always set (but empty), which
33570 seems fine, we just need to look at state.gps.connected to see if
33571 there's a GPS receiver on board.
33573 For TeleNano, we also want to hide the igniter status fields as they
33574 won't have any data present.
33576 Signed-off-by: Keith Packard <keithp@keithp.com>
33578 commit 80ca066a825646f833ca609190c76c5252118d9a
33579 Author: Keith Packard <keithp@keithp.com>
33580 Date: Wed Jul 6 21:36:38 2011 -0700
33582 altosui: Build device constants into .java code
33584 This eliminates a depedency on updates to the system helper library,
33585 which means we don't have to provide a new library on all platforms
33586 just to support a new USB id.
33588 Signed-off-by: Keith Packard <keithp@keithp.com>
33590 commit 504ab7ab355652d5d01094c927089029596a0753
33591 Author: Keith Packard <keithp@keithp.com>
33592 Date: Wed Jul 6 17:49:01 2011 -0700
33594 altos: product defines are always in ao_product.h
33596 When all products were built in a single directory, each one had a
33597 separate version of ao_product.h. Now that they all reside in
33598 sub-directories, each directory has its own ao_product.h
33600 This change is needed so that other modules in the system can use the
33601 product defines; otherwise, ao_product.h was not built at the right time.
33603 Signed-off-by: Keith Packard <keithp@keithp.com>
33605 commit 81cf2e833bedbc1ace8fd310e9e94bfb7673d428
33606 Author: Keith Packard <keithp@keithp.com>
33607 Date: Wed Jul 6 16:43:17 2011 -0700
33609 altos: Ensure low-rate telem packets interleave with sensor telem packets
33611 To avoid over-committing the radio link, we want to send only
33612 one low rate packet after each sensor packet. However, the
33613 initializations for this were incorrect, causing the configuration and
33614 location packets to be sent at the same time.
33616 Signed-off-by: Keith Packard <keithp@keithp.com>
33618 commit 5ca6400fd8a360b64d8f96f50d5595a7fd17762d
33619 Author: Keith Packard <keithp@keithp.com>
33620 Date: Wed Jul 6 16:18:54 2011 -0700
33622 altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.c
33624 All products use the common ao_telemetry.c code now
33626 Signed-off-by: Keith Packard <keithp@keithp.com>
33628 commit 0154d13756bcb09f009981ee5e4bd27fd04b8788
33629 Author: Keith Packard <keithp@keithp.com>
33630 Date: Wed Jul 6 16:19:22 2011 -0700
33632 altos: Switch Tm and Tn to common telemetry code
33634 Signed-off-by: Keith Packard <keithp@keithp.com>
33636 commit b65140a0139075adeddaccf0f4d5c7a75fac4757
33637 Author: Keith Packard <keithp@keithp.com>
33638 Date: Wed Jul 6 15:52:25 2011 -0700
33640 altos: Switch flash drivers __xdata to __pdata
33642 Signed-off-by: Keith Packard <keithp@keithp.com>
33644 commit 038d7b25ba833da4be458409670d3f95e8aaf17b
33645 Author: Keith Packard <keithp@keithp.com>
33646 Date: Wed Jul 6 15:51:52 2011 -0700
33648 altos: Switch ao_flight and ao_flight_nano __xdata to __pdata
33650 Signed-off-by: Keith Packard <keithp@keithp.com>
33652 commit 3742b36a528f114c3b1873caa4f39581145b76da
33653 Author: Keith Packard <keithp@keithp.com>
33654 Date: Wed Jul 6 15:28:01 2011 -0700
33656 altos: Switch ao_dbg.c __xdata to __pdata
33658 Signed-off-by: Keith Packard <keithp@keithp.com>
33660 commit 6903b6464db7eb803de8bf9b897c45431f7a1d63
33661 Author: Keith Packard <keithp@keithp.com>
33662 Date: Wed Jul 6 15:27:32 2011 -0700
33664 altos: Switch ao_config.c __xdata to __pdata
33666 Signed-off-by: Keith Packard <keithp@keithp.com>
33668 commit 6893752900385ee51cc4cf75e1b672202de7578a
33669 Author: Keith Packard <keithp@keithp.com>
33670 Date: Wed Jul 6 15:26:09 2011 -0700
33672 altos: switch ao_cmd __xdata to __pdata
33676 Signed-off-by: Keith Packard <keithp@keithp.com>
33678 commit 2ec986f08ce8d4635f4435bb0042b405d93edc40
33679 Author: Keith Packard <keithp@keithp.com>
33680 Date: Wed Jul 6 15:45:04 2011 -0700
33682 altos: Switch const for __code in struct ao_cmds
33684 This saves quite a bit of code space when accessing these values.
33686 Signed-off-by: Keith Packard <keithp@keithp.com>
33688 commit 355db71f4511adff8abcb2caded61c12fe8b7ee9
33689 Author: Keith Packard <keithp@keithp.com>
33690 Date: Wed Jul 6 15:41:32 2011 -0700
33692 altos: Switch ao_usb.c __xdata to __pdata
33694 Signed-off-by: Keith Packard <keithp@keithp.com>
33696 commit 359baab005c274a0841268c615c23b3ffef813cf
33697 Author: Keith Packard <keithp@keithp.com>
33698 Date: Wed Jul 6 15:41:06 2011 -0700
33700 altos: Switch ao_telemetry.c __xdata to __pdata
33702 Signed-off-by: Keith Packard <keithp@keithp.com>
33704 commit f2f8ade6994aa3a69fd08f19c4403ceb8cea295d
33705 Author: Keith Packard <keithp@keithp.com>
33706 Date: Wed Jul 6 15:39:44 2011 -0700
33708 altos: Switch ao_stdio.c __data to __pdata
33710 Signed-off-by: Keith Packard <keithp@keithp.com>
33712 commit 9ba0da9247ea424a7a147aa85daae0d5e6316b81
33713 Author: Keith Packard <keithp@keithp.com>
33714 Date: Wed Jul 6 15:38:46 2011 -0700
33716 altos: Switch ao_serial.c __xdata to __pdata
33718 Signed-off-by: Keith Packard <keithp@keithp.com>
33720 commit 86b41d4c2b8a9fa4507cdb75302e0cedebb103cb
33721 Author: Keith Packard <keithp@keithp.com>
33722 Date: Wed Jul 6 15:38:29 2011 -0700
33724 altos: Switch ao_sample.c __xdata to __pdata
33726 Signed-off-by: Keith Packard <keithp@keithp.com>
33728 commit 803bf106caf5d6b5ac12eb00a941647c7325edd1
33729 Author: Keith Packard <keithp@keithp.com>
33730 Date: Wed Jul 6 15:37:34 2011 -0700
33732 altos: Switch ao_rssi.c __xdata to __pdata
33734 Signed-off-by: Keith Packard <keithp@keithp.com>
33736 commit 002f167fc2709aaf1a4984aaa0a3519a97749d5f
33737 Author: Keith Packard <keithp@keithp.com>
33738 Date: Wed Jul 6 15:37:15 2011 -0700
33740 altos: Switch ao_report.c __xdata to __pdata
33742 Signed-off-by: Keith Packard <keithp@keithp.com>
33744 commit 5203ddaac692bfd82a01368da9fb66c25e9e14c1
33745 Author: Keith Packard <keithp@keithp.com>
33746 Date: Wed Jul 6 15:36:45 2011 -0700
33748 altos: Switch ao_log.c and ao_log_big.c __xdata to __pdata
33750 Signed-off-by: Keith Packard <keithp@keithp.com>
33752 commit 62267144d189967fcd0724b6dfbdbab3cb6fb414
33753 Author: Keith Packard <keithp@keithp.com>
33754 Date: Wed Jul 6 15:33:52 2011 -0700
33756 altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdata
33758 Signed-off-by: Keith Packard <keithp@keithp.com>
33760 commit 92047ff86c79c2b18ef565a4560b06fe00d6f159
33761 Author: Keith Packard <keithp@keithp.com>
33762 Date: Wed Jul 6 15:31:53 2011 -0700
33764 altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdata
33766 Signed-off-by: Keith Packard <keithp@keithp.com>
33768 commit 64860be02b3efa6f784a259249cfa6d14545fbd3
33769 Author: Keith Packard <keithp@keithp.com>
33770 Date: Wed Jul 6 13:49:05 2011 -0700
33772 altos: Shrink ao_add_task by rolling up a memset loop
33774 This has a dramatic effect. By pulling the 'stack' variable into
33775 registers it reduces the size of this function from 550 to 231 bytes.
33777 Signed-off-by: Keith Packard <keithp@keithp.com>
33779 commit 480b48837db31987b947e4d32248965d4a16be03
33780 Author: Keith Packard <keithp@keithp.com>
33781 Date: Wed Jul 6 13:21:25 2011 -0700
33783 altos: Shrink ao_config_callsign_set
33785 Replacing a hand-coded memset with a function call, using static space
33786 instead of stack space for an array.
33788 Signed-off-by: Keith Packard <keithp@keithp.com>
33790 commit 41c230cac359b4459ca93196d08704b7d35447c7
33791 Author: Keith Packard <keithp@keithp.com>
33792 Date: Wed Jul 6 12:38:11 2011 -0700
33794 altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmd
33796 No functional changes, just reduces code size.
33798 Signed-off-by: Keith Packard <keithp@keithp.com>
33800 commit 481577a29380afe6750ef7c4e928daff837cbc49
33801 Author: Keith Packard <keithp@keithp.com>
33802 Date: Tue Jul 5 23:38:42 2011 -0700
33804 altosui: Compress telemetry records marked with the same time
33806 Split telemetry transmits multiple packets with the same
33807 timestamp. Merge those into a single record when read from a file.
33809 Signed-off-by: Keith Packard <keithp@keithp.com>
33811 commit 7cfd43663cde5ebdf04e4face076d79ff6329ac3
33812 Author: Keith Packard <keithp@keithp.com>
33813 Date: Tue Jul 5 23:38:28 2011 -0700
33815 altosui: Remove debug printf.
33817 Signed-off-by: Keith Packard <keithp@keithp.com>
33819 commit d0335f83c54df0b23c28d04d34c212a1bdffadd0
33820 Author: Keith Packard <keithp@keithp.com>
33821 Date: Tue Jul 5 23:37:51 2011 -0700
33823 altosui: Add main/drogue voltages to default graph
33825 Until we get a UI for changing the graph elements, lets add a few more
33826 potentially useful values.
33828 Signed-off-by: Keith Packard <keithp@keithp.com>
33830 commit c1f859170b37864b816eb561318dbfb1cafaeed6
33831 Author: Keith Packard <keithp@keithp.com>
33832 Date: Tue Jul 5 23:37:00 2011 -0700
33834 altosui: Elide missing values from graphs
33836 Signed-off-by: Keith Packard <keithp@keithp.com>
33838 commit 72575dcb9cfbb5c1ccdb3510b9962a6f60ca3fa3
33839 Author: Keith Packard <keithp@keithp.com>
33840 Date: Tue Jul 5 23:35:50 2011 -0700
33842 altosui: Elide nul bytes at end of telemetry string values
33844 All telemetry fields are fixed length, so any embedded strings are
33845 padded with nul bytes.
33847 Signed-off-by: Keith Packard <keithp@keithp.com>
33849 commit 6ac34f9c8efd464194137ac4ce8228bf9d7d83be
33850 Author: Keith Packard <keithp@keithp.com>
33851 Date: Tue Jul 5 23:35:02 2011 -0700
33853 doc: Add section about TeleDongle USB line format
33855 Describe the format of the TELEM lines sent over USB from TeleDongle
33858 Signed-off-by: Keith Packard <keithp@keithp.com>
33860 commit edf6252450e06fd42fa6dde3acd127baa8fa6d36
33861 Author: Keith Packard <keithp@keithp.com>
33862 Date: Tue Jul 5 21:44:53 2011 -0700
33864 altos: Adapt to changes in telemetry Configuration packet
33866 Apogee delay added. flight_log_max changed to two bytes (in kB now).
33868 Signed-off-by: Keith Packard <keithp@keithp.com>
33870 commit 938949e39aac834a1c0912f8f307f74fe41418cc
33871 Author: Keith Packard <keithp@keithp.com>
33872 Date: Tue Jul 5 21:42:22 2011 -0700
33874 doc: Chang Config and Location packets
33876 Config packets get apogee delay, and have flight_log_max shrunk to two
33879 Location packets get climb_rate added.
33881 Signed-off-by: Keith Packard <keithp@keithp.com>
33883 commit 4132ac5896114e5f3d8fb3f219422e8933078cf4
33884 Author: Keith Packard <keithp@keithp.com>
33885 Date: Tue Jul 5 21:41:44 2011 -0700
33887 altosui: Parse remaining standard telemetry packets
33889 Signed-off-by: Keith Packard <keithp@keithp.com>
33891 commit ef3ce687d73c1274ce5368432f4d449b063ce5c0
33892 Author: Keith Packard <keithp@keithp.com>
33893 Date: Mon Jul 4 23:39:21 2011 -0700
33895 altos: Complete new telemetry switchover
33897 This involved rewriting the GPS code to use the telemetry structures
33898 directly so that a memcpy could be used to transfer the data to the
33899 telemetry packets, saving a bunch of code space, along with fixing up
33900 the gps testing programs to deal with the structure changes.
33902 In addition, the teledongle code needed to have the monitoring code
33903 split into separate radio receiver and USB writer threads as the
33904 packets are now back-to-back, and hence come too fast to wait for the
33905 USB data to be sent to the host after each one.
33907 Signed-off-by: Keith Packard <keithp@keithp.com>
33909 commit 359681f23e2f71bc8f4975a4a76ae28c08ecab2e
33910 Author: Keith Packard <keithp@keithp.com>
33911 Date: Mon Jul 4 18:09:03 2011 -0700
33913 altos: Add split telemetry code
33915 This sends every packet every time, which isn't correct, but should be
33916 useful for testing.
33918 Signed-off-by: Keith Packard <keithp@keithp.com>
33920 commit b51e5466f7a125db873edd1fa9bd3881d7e98aad
33921 Author: Keith Packard <keithp@keithp.com>
33922 Date: Mon Jul 4 18:08:19 2011 -0700
33924 altos: Shrink help text
33926 Reduce const space taken by command help text.
33928 Signed-off-by: Keith Packard <keithp@keithp.com>
33930 commit 9e5e4c1ad82d621ceb7286f72c87eeaf5976f9bf
33931 Author: Keith Packard <keithp@keithp.com>
33932 Date: Mon Jul 4 18:06:48 2011 -0700
33934 altos: Add sat info to GPS report command
33936 Plan to use this to report current flight computer state in idle mode.
33938 Signed-off-by: Keith Packard <keithp@keithp.com>
33940 commit 06b6f78e22be38a26bfe11ed4d4b659d5b13f00c
33941 Author: Keith Packard <keithp@keithp.com>
33942 Date: Mon Jul 4 18:04:49 2011 -0700
33944 altos: Shrink const space in ao_config
33946 Eliminate separate 'cmd' and 'help' struct entries.
33947 Use \0 trick in cmd strings to eliminate whitespace.
33950 Signed-off-by: Keith Packard <keithp@keithp.com>
33952 commit d3c26e534d8df34cfbf29b70cd1b2692493ce150
33953 Author: Keith Packard <keithp@keithp.com>
33954 Date: Mon Jul 4 18:03:51 2011 -0700
33956 altos: teledongle does not need ao_packet_slave.c
33958 TeleDongle doesn't provide slave interfaces, so remove ao_packet_slave
33961 Signed-off-by: Keith Packard <keithp@keithp.com>
33963 commit c763a3f9cf2bf055e9705ce5ff4bc172f445037d
33964 Author: Keith Packard <keithp@keithp.com>
33965 Date: Mon Jul 4 18:02:52 2011 -0700
33967 Version strings must be < 8 bytes long
33969 The new telemetry packets include the version string, so make sure its
33970 less than 8 characters long
33972 Signed-off-by: Keith Packard <keithp@keithp.com>
33974 commit a08173197d5533ecb395102ed34e751135660d06
33975 Author: Keith Packard <keithp@keithp.com>
33976 Date: Mon Jul 4 18:01:59 2011 -0700
33978 doc: Fix a few minor telemetry doc mistakes
33980 Multiple 'accel' entries in the Sensor packet.
33981 Swap ground_accel and ground_pres to group accel cal data
33983 Signed-off-by: Keith Packard <keithp@keithp.com>
33985 commit 98df3ba984acf3b47a09949bbea0f3264f711f5b
33986 Author: Keith Packard <keithp@keithp.com>
33987 Date: Mon Jul 4 14:17:55 2011 -0700
33989 doc: Complete initial telemetry description
33991 Finish describing the contents and modulation scheme for telemetry
33994 Signed-off-by: Keith Packard <keithp@keithp.com>
33996 commit 06e82bd2c2a5eea153a053e542df9bc3537e9a01
33997 Author: Keith Packard <keithp@keithp.com>
33998 Date: Sat Jul 2 01:50:33 2011 -0700
34000 doc: Add telemetry format description
34002 Document the telemetry packet contents.
34004 Signed-off-by: Keith Packard <keithp@keithp.com>
34006 commit 7fd9b8f720add559b262e81d61ededc9df16ca94
34007 Author: Keith Packard <keithp@keithp.com>
34008 Date: Tue Jun 28 01:03:00 2011 -0700
34010 altosui: Support raw telemetry from TeleDongle
34012 Use raw telemetry frames when TeleDongle supports them, this involves
34013 parsing the hex dump of the packet instead of having teledongle take
34014 the packet apart. Only the legacy format is working at this point; the
34015 altos bits for the new split telemetry frames is not written yet.
34017 Signed-off-by: Keith Packard <keithp@keithp.com>
34019 commit cb239b7161feea8646425b1f5788c3c82ae24321
34020 Author: Keith Packard <keithp@keithp.com>
34021 Date: Tue Jun 28 01:01:08 2011 -0700
34023 altos: ao_radio_recv needs byte count *including* rssi and status
34025 That's two more than the actual packet length.
34027 Signed-off-by: Keith Packard <keithp@keithp.com>
34029 commit 336224a08327cadc95f6e5b564a4ddc64aaad8f8
34030 Author: Keith Packard <keithp@keithp.com>
34031 Date: Fri Jun 24 08:31:51 2011 -0700
34033 altos: Start adding new telemetry frame definitions
34035 These use the initial 24 bytes per frame plan, which will probably get
34036 changed to 32 bytes per frame.
34038 Signed-off-by: Keith Packard <keithp@keithp.com>
34040 commit 5e111fdf1f23203baeeb490ae1b69402ebd513b8
34041 Author: Keith Packard <keithp@keithp.com>
34042 Date: Fri Jun 24 08:31:12 2011 -0700
34044 altos: Add checksum to TELEM output lines
34046 Verify the received telemetry lines to protect against OS data loss
34048 Signed-off-by: Keith Packard <keithp@keithp.com>
34050 commit 489a68ba8e3bc360e2e8fc887e4c4b840b5a0dd3
34051 Author: Keith Packard <keithp@keithp.com>
34052 Date: Wed Jun 22 12:27:34 2011 -0700
34054 altos: Add arbitrary telemetry packet monitoring
34056 This adds the ability to monitor arbitrary telemetry packets (up to
34057 128 bytes), moving the telemetry data parsing up to the host.
34059 Signed-off-by: Keith Packard <keithp@keithp.com>
34061 commit 0e67b6890dd3a06665239f8dfd2e69266d055e46
34062 Author: Keith Packard <keithp@keithp.com>
34063 Date: Wed Jun 22 12:26:45 2011 -0700
34065 altos: Rename telemetry to telemetry_orig
34067 This makes room to create a new multi-packet telemetry format without
34068 changing anything yet.
34070 Signed-off-by: Keith Packard <keithp@keithp.com>
34072 commit dc0b49dcbaa2d0a69e002c151337b6e9fd3060d9
34073 Author: Keith Packard <keithp@keithp.com>
34074 Date: Thu Jun 2 23:16:30 2011 -0700
34076 altosui: Handle old TeleDongle receiving kalman telemetry packets
34078 The telemetry packets now send the kalman height/speed/accel values
34079 instead of the ad-hoc values. If received by an old TeleDongle box,
34080 the speed value will be of the form 0x8000abcd, which will be printed
34081 as a 32-bit value by TeleDongle. We only want the abcd part, which is
34082 the speed * 16. Detect this automatically and compute the correct
34083 values for all three.
34085 Signed-off-by: Keith Packard <keithp@keithp.com>
34087 commit 4d27e281f81aee88adff3d84085356ec310e4b92
34088 Author: Keith Packard <keithp@keithp.com>
34089 Date: Wed May 25 21:38:02 2011 -0600
34091 Switch version to 0.9.4
34093 For Mayhem, so we can tell what version each board is running
34095 Signed-off-by: Keith Packard <keithp@keithp.com>
34097 commit 479bdffa35d0b8d4e48868c8d20f3cb1549521ab
34098 Author: Keith Packard <keithp@keithp.com>
34099 Date: Fri May 6 23:55:23 2011 -0700
34101 Revert "altos: Debugging TBT issues -- check pin configuration after boot"
34103 This reverts commit 514348055630edec12224c4b0964240b929759a3.
34105 Looks like this was never a problem.
34107 commit 66bdf0e066bc0bb7a326a6c2a9c88b69e5c1be66
34108 Author: Keith Packard <keithp@keithp.com>
34109 Date: Fri May 6 23:12:47 2011 -0700
34111 altos: clear CPU port 1 interrupt flag when handled
34113 Signed-off-by: Keith Packard <keithp@keithp.com>
34115 commit 8be559baa979c15e78f8dba7879b383dbe3936d3
34116 Author: Keith Packard <keithp@keithp.com>
34117 Date: Fri May 6 22:59:15 2011 -0700
34119 altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line
34121 Otherwise, we're heading off into the weeds...
34123 Signed-off-by: Keith Packard <keithp@keithp.com>
34125 commit 23f441b95e55fbee709382b05d325bc021285766
34126 Author: Keith Packard <keithp@keithp.com>
34127 Date: Fri May 6 22:49:54 2011 -0700
34129 altos: Initialize beeper for telebt
34131 Needed to get sounds to come out
34133 Signed-off-by: Keith Packard <keithp@keithp.com>
34135 commit 514348055630edec12224c4b0964240b929759a3
34136 Author: Keith Packard <keithp@keithp.com>
34137 Date: Fri May 6 22:42:58 2011 -0700
34139 altos: Debugging TBT issues -- check pin configuration after boot
34141 Make sure the serial pins are configured as peripherals
34142 Make sure the ser_reset and bt_link pins are going the right direction.
34144 Signed-off-by: Keith Packard <keithp@keithp.com>
34146 commit 22e3ac0eb014b8255029763ae8180ad3527ba306
34147 Author: Keith Packard <keithp@keithp.com>
34148 Date: Fri May 6 22:42:32 2011 -0700
34150 altos: Add beeper to TBT v0.1
34152 It's available, let's use it.
34154 Signed-off-by: Keith Packard <keithp@keithp.com>
34156 commit 6d858b64ee0e8c227c149d2af6d2d634536964f4
34157 Author: Keith Packard <keithp@keithp.com>
34158 Date: Fri May 6 22:12:31 2011 -0700
34160 altos: pull TBT v0.1 ser_reset line low
34162 This line resets the BT module if held low for three seconds.
34164 Signed-off-by: Keith Packard <keithp@keithp.com>
34166 commit 3336d0f726afd1d43cf62280940e5fb91dab2e91
34167 Author: Keith Packard <keithp@keithp.com>
34168 Date: Fri May 6 21:13:19 2011 -0700
34170 altos: Fix BT link status pin for real TBT hardware
34172 The prototype used P2_1, while the real hardware uses P1_7. Lots of
34173 defines to make this work...
34175 Signed-off-by: Keith Packard <keithp@keithp.com>
34177 commit 19bfa3882a2d95fcade256c2d63ad24f794281e5
34178 Author: Keith Packard <keithp@keithp.com>
34179 Date: Fri May 6 20:33:58 2011 -0700
34181 altos: Use USART configuration 1 with flow control for TBT
34183 It's just wired that way.
34185 Signed-off-by: Keith Packard <keithp@keithp.com>
34187 commit d9cc27641fe1778c098b065bf110be7823e6c9f4
34188 Author: Keith Packard <keithp@keithp.com>
34189 Date: Fri May 6 16:57:38 2011 -0700
34191 altos: Add telebt-v0.1 to Makefile
34193 Doesn't get built without it.
34195 Signed-off-by: Keith Packard <keithp@keithp.com>
34197 commit c360e5c04e30421e9ea2f7006b7d35aef35f1edd
34198 Author: Bdale Garbee <bdale@gag.com>
34199 Date: Fri May 6 17:57:17 2011 -0600
34201 first cut at a telebt turn on script
34203 commit c1760cebd47d0f03808f3204c0fcb1183f754e50
34204 Author: Keith Packard <keithp@keithp.com>
34205 Date: Fri May 6 15:44:56 2011 -0700
34207 altos: Add preliminary telebt v0.1 defines
34209 This should make the telebt v0.1 binary that works on the real hardware.
34211 Signed-off-by: Keith Packard <keithp@keithp.com>
34213 commit 72a03baa73698fc1213a74320e6253c2380dd8fa
34214 Author: Keith Packard <keithp@keithp.com>
34215 Date: Mon Apr 25 23:00:42 2011 -0700
34217 altosui: Fix BT manage dialog so that the device lists resize
34219 This makes the device scrolling lists fill any extra space when the
34222 Signed-off-by: Keith Packard <keithp@keithp.com>
34224 commit e3bf13a38d24e95b16df1e2f01952d10f24cda10
34225 Author: Keith Packard <keithp@keithp.com>
34226 Date: Mon Apr 25 22:55:08 2011 -0700
34228 altosui: Move AltosIgniteUI device open out of Swing thread
34230 Eliminate more blocking code from the Swing thread.
34232 Signed-off-by: Keith Packard <keithp@keithp.com>
34234 commit 109344d54d3fa4f79342fd1ea2a3f4085475e30c
34235 Author: Keith Packard <keithp@keithp.com>
34236 Date: Mon Apr 25 22:28:40 2011 -0700
34238 altosui: Display reader name (usually the device) when an I/O error occurs
34240 Access the reader name directly from the reader object instead of a
34241 local variable (which wasn't getting set anyways).
34243 Signed-off-by: Keith Packard <keithp@keithp.com>
34245 commit aa5caf6310f074109472e6f55d8bd9751fb75c4c
34246 Author: Keith Packard <keithp@keithp.com>
34247 Date: Mon Apr 25 21:26:21 2011 -0700
34249 altosui: Fix TeleBT name in flight monitor title
34251 Was getting the product number, not the product name.
34253 Signed-off-by: Keith Packard <keithp@keithp.com>
34255 commit 2e7b7b80432bb251ac39efa1fa05d32b5f250e14
34256 Author: Keith Packard <keithp@keithp.com>
34257 Date: Mon Apr 25 21:17:07 2011 -0700
34259 altosui: Separate out flash debug code to separate thread
34261 This avoids blocking the Swing thread while waiting for the serial
34264 Signed-off-by: Keith Packard <keithp@keithp.com>
34266 commit 214cd69c0e4a1617ed5cde8fc2f46a4cee6ecced
34267 Author: Keith Packard <keithp@keithp.com>
34268 Date: Sat Apr 23 22:50:58 2011 -0700
34270 altos: add telebt-v0.0 Makefile
34272 Git doesn't like to add these.
34274 Signed-off-by: Keith Packard <keithp@keithp.com>
34276 commit d41edb3384b6336f3482e61b0c9f9400a8b4f519
34277 Author: Keith Packard <keithp@keithp.com>
34278 Date: Tue Apr 19 15:29:39 2011 -0700
34280 altosui: Make flight data download work through TeleBT
34282 This required flushing input before reading data blocks and adjusting
34285 Signed-off-by: Keith Packard <keithp@keithp.com>
34287 commit 44fb71ca3e5bccd5f601fc5a2d5da7292050b1d6
34288 Merge: 2ebdb88 c269e26
34289 Author: Keith Packard <keithp@keithp.com>
34290 Date: Tue Apr 19 14:06:39 2011 -0700
34292 Merge branch 'telemini' into telebt
34294 commit 2ebdb888f6792de70b3132950a988d49752d264e
34295 Author: Keith Packard <keithp@keithp.com>
34296 Date: Tue Apr 19 14:01:19 2011 -0700
34298 altosui: Eliminate ao_cmd_filter hook
34300 Disabling status messages means we don't need to filter them out of
34303 Signed-off-by: Keith Packard <keithp@keithp.com>
34305 commit 7f5c9986dfa2d130b6c8c14308638cce49391a6e
34306 Author: Keith Packard <keithp@keithp.com>
34307 Date: Tue Apr 19 13:42:30 2011 -0700
34309 altos: remove BT logging code
34311 This was used to debug the serial line startup.
34313 Signed-off-by: Keith Packard <keithp@keithp.com>
34315 commit 0195ff442c1da5d363dfda3f88f41865d0c6b469
34316 Author: Keith Packard <keithp@keithp.com>
34317 Date: Tue Apr 19 13:31:10 2011 -0700
34319 altos: Remove bt debug command
34321 This will permit some additional cleanups.
34323 Signed-off-by: Keith Packard <keithp@keithp.com>
34325 commit ce7cf0c5ddc5405f6f474f4e20752fc0b02f3ecb
34326 Author: Keith Packard <keithp@keithp.com>
34327 Date: Tue Apr 19 13:27:40 2011 -0700
34329 altos: Simplify BT communications
34331 Eliminate stdio I/O wrappers
34333 Signed-off-by: Keith Packard <keithp@keithp.com>
34335 commit e3d501940718428135e04995dff7fef691c08a20
34336 Author: Keith Packard <keithp@keithp.com>
34337 Date: Tue Apr 19 13:20:19 2011 -0700
34339 altos: Solidify BT connections
34341 Use delays while sending commands to BT module.
34342 Don't use BT for stdio until the module is initialized.
34343 Add \r to name setting command
34344 Don't require 'connected' signal for command input.
34346 Signed-off-by: Keith Packard <keithp@keithp.com>
34348 commit 6b5957d5f6f8181da7be98c9bce49a0ec0b4a713
34349 Author: Keith Packard <keithp@keithp.com>
34350 Date: Tue Apr 19 10:41:28 2011 -0700
34352 altosui: Wait two seconds after bluetooth connect XXX
34354 "something" isn't quite ready to communicate right after the device is
34355 connected, so we stick a delay in. There should be a better fix.
34357 Signed-off-by: Keith Packard <keithp@keithp.com>
34359 commit 8de9d3cbfcd1db7b554fb761296a8de09aafc8c3
34360 Author: Keith Packard <keithp@keithp.com>
34361 Date: Tue Apr 19 10:25:47 2011 -0700
34363 altos: Add delays to bt startup sequence
34365 The BT device takes a few seconds after power-up before it is ready to
34368 Signed-off-by: Keith Packard <keithp@keithp.com>
34370 commit 17f38e045fcd8ca0224095c0b2b7b098df77a8d8
34371 Author: Keith Packard <keithp@keithp.com>
34372 Date: Tue Apr 19 08:43:40 2011 -0700
34374 altosui: Use persistent list of bluetooth devices for device dialogs
34376 Store a list of known bluetooth devices as preferences. Always include
34377 those in device dialogs with an option to go browse for more devices
34378 in both the device dialog and the Configure AltosUI dialog.
34380 Signed-off-by: Keith Packard <keithp@keithp.com>
34382 commit f249e5926f5fd9f86c41e7f0a414193533d4d8b0
34383 Author: Keith Packard <keithp@keithp.com>
34384 Date: Mon Apr 18 18:16:38 2011 -0500
34386 altosui: Make bluetooth dialog modal
34388 This allows it to be displayed correctly while the device dialog box
34389 (also modal) is up.
34391 Signed-off-by: Keith Packard <keithp@keithp.com>
34393 commit 84163eee7847a09fe78f8762b28f857d76bf5755
34394 Author: Keith Packard <keithp@keithp.com>
34395 Date: Thu Apr 14 10:22:30 2011 -0700
34397 altosui: Make AltosBTDevice implement AltosDevice interface
34399 This will allow the use of either USB or BT devices through the
34400 AltosDevice interface.
34402 Signed-off-by: Keith Packard <keithp@keithp.com>
34404 commit 9cdef76c1275b343099d0d01af82d7eadd36a410
34405 Author: Keith Packard <keithp@keithp.com>
34406 Date: Thu Apr 14 10:12:29 2011 -0700
34408 altosui: Create abstract AltosDevice class
34410 This will wrap either USB or BT devices. The USB device constants have
34411 been moved to Altos.java
34413 Signed-off-by: Keith Packard <keithp@keithp.com>
34415 commit 5b3f18b38d80aa041b971204bf7a94278bd9584a
34416 Author: Keith Packard <keithp@keithp.com>
34417 Date: Fri Apr 8 19:46:15 2011 -0700
34419 altosui: Add primitive bluetooth device manager UI.
34421 This isn't useful, but does inquire for available bluetooth devices
34422 and show them in a list.
34424 Signed-off-by: Keith Packard <keithp@keithp.com>
34426 commit c269e263a6accd815ed5d08c0f5a6c3d5b9d3853
34427 Author: Keith Packard <keithp@keithp.com>
34428 Date: Thu Apr 14 09:38:48 2011 -0700
34430 altos: Write a few pre-launch samples for Tm/Tn devices
34432 Record pre-launch samples in a small ring and flush that to flash when
34433 launch is detected. This provides a complete record of the flight,
34434 rather than simply starting after launch detect.
34436 Signed-off-by: Keith Packard <keithp@keithp.com>
34438 commit a0fb471ce10642fc4a4bd40e4a81f8d6fe7a7c21
34439 Author: Keith Packard <keithp@keithp.com>
34440 Date: Wed Apr 13 20:27:38 2011 -0700
34442 altosui: oops - lost state changes when downloading eeprom data.
34444 This would cause the reader to just keep reading past the end of the
34447 Signed-off-by: Keith Packard <keithp@keithp.com>
34449 commit 7f49d694e776819e03b2c708e1c4ee23ba311430
34450 Author: Keith Packard <keithp@keithp.com>
34451 Date: Sat Apr 9 22:53:12 2011 -0700
34453 altos/altosui: Log averaged baro sensor data in Tm/Tn
34455 Instead of logging the best height guess from the kalman filter, log
34456 barometer data. The logged data consists of the average value betwen
34457 log points to reduce noise.
34459 Signed-off-by: Keith Packard <keithp@keithp.com>
34461 commit 8dd455204cf8712fa8c142b0c0517cec1bf5fd0f
34462 Author: Keith Packard <keithp@keithp.com>
34463 Date: Fri Apr 8 10:13:55 2011 -0700
34465 altosui: Add low-level Bluetooth APIs
34467 Adds the JNI functions to query and connect to arbitrary
34470 Adds Java wrappers to construct a list of proximate bluetooth devices.
34472 Signed-off-by: Keith Packard <keithp@keithp.com>
34474 commit bf1c7df5301a1727e871a8447f835fe75bdce3fc
34475 Author: Keith Packard <keithp@keithp.com>
34476 Date: Fri Apr 8 10:12:50 2011 -0700
34478 altosui: Add TeleBT USB device support
34480 TeleBT can work just like a TeleDongle over USB.
34482 Signed-off-by: Keith Packard <keithp@keithp.com>
34484 commit 1a54a58d72147888f783a3caf364479efff4ed9b
34485 Author: Keith Packard <keithp@keithp.com>
34486 Date: Thu Apr 7 22:00:38 2011 -0700
34488 altos: Use PIO(6) on BTM to monitor BT connection. Fix BTM init.
34490 PIo(6) appears to be an active-low indication of the Bluetooth
34491 connection status. Hook this up using an interrupt to track the
34492 link state instead of using in-band status messages.
34494 Signed-off-by: Keith Packard <keithp@keithp.com>
34496 commit f28efe271f9670473249574f6bcf6e160fe58c7b
34497 Merge: 8db5c52 835ab3a
34498 Author: Keith Packard <keithp@keithp.com>
34499 Date: Fri Apr 1 19:35:22 2011 -0700
34501 Merge branch 'telemini' into telebt
34503 commit 835ab3a8c2741a09b27de58c37439a193c9919ce
34504 Author: Keith Packard <keithp@keithp.com>
34505 Date: Fri Apr 1 19:35:00 2011 -0700
34507 altosui: Add missing AltosTelemetryMap.java file
34509 Signed-off-by: Keith Packard <keithp@keithp.com>
34511 commit 8db5c52f1c76a05020e4e0afbe4ea27485ad9f82
34512 Author: Keith Packard <keithp@keithp.com>
34513 Date: Fri Apr 1 17:26:08 2011 -0700
34515 altos: Clean up BT serial communcations
34517 Disable echo on both ends in command mode to eliminate looping error
34520 Switch to 57600 baud to improve performance.
34522 Signed-off-by: Keith Packard <keithp@keithp.com>
34524 commit a5d60fdb9c969c1516feb76a16001c9688112c4c
34525 Author: Keith Packard <keithp@keithp.com>
34526 Date: Fri Apr 1 17:25:07 2011 -0700
34528 altos: Make cmd echo per-connection instead of global
34530 Allow different connections to use different echo values, permitting
34531 the packet link to turn off echo while the USB link still has it on.
34533 Signed-off-by: Keith Packard <keithp@keithp.com>
34535 commit 4e2c18249e16c98cf5f7dccdf8d3b84bc473863a
34536 Author: Keith Packard <keithp@keithp.com>
34537 Date: Fri Apr 1 16:48:12 2011 -0700
34539 altos: Clean up serial initialization
34541 Flush serial input buffers when switching speeds.
34542 Ensure pin configuration is correct.
34544 Signed-off-by: Keith Packard <keithp@keithp.com>
34546 commit 92386f2e8419c4df125692cc998eb72ec49bf991
34547 Author: Keith Packard <keithp@keithp.com>
34548 Date: Fri Apr 1 14:12:56 2011 -0700
34550 altos: Clean up usage of serial port for stdio
34552 Code wanting to use this must invoke ao_add_stdio; that way
34553 the link can be configured before command processing starts.
34555 Signed-off-by: Keith Packard <keithp@keithp.com>
34557 commit 9f8a96a8516e13878b329dbf1da855ed9a3219c4
34558 Author: Keith Packard <keithp@keithp.com>
34559 Date: Fri Apr 1 14:11:44 2011 -0700
34561 altos: Make ao_serial_drain public
34563 Allow external code to discard serial input
34565 Signed-off-by: Keith Packard <keithp@keithp.com>
34567 commit 4f243a282f9aeb7433ccb2942850d380a091e603
34568 Author: Keith Packard <keithp@keithp.com>
34569 Date: Fri Apr 1 14:10:37 2011 -0700
34571 altos: Remove serial monitor command
34573 This takes up space and isn't that useful these days
34575 Signed-off-by: Keith Packard <keithp@keithp.com>
34577 commit 39bde78edc863d9d2ef50a59b8f28ab6274892b4
34578 Author: Keith Packard <keithp@keithp.com>
34579 Date: Fri Apr 1 14:08:37 2011 -0700
34581 altos: Allow any stdio to be used with packet forwarding
34583 There's no reason to restrict packet forwarding to work only from
34586 Signed-off-by: Keith Packard <keithp@keithp.com>
34588 commit 01952da35a57ae4da062facb26b3c6d7de29190f
34589 Author: Keith Packard <keithp@keithp.com>
34590 Date: Fri Apr 1 14:07:23 2011 -0700
34592 altos: Provide for a pre-filter on commands
34594 This allows for external code to see each command line before it is
34595 processed and potentially skip it.
34597 Signed-off-by: Keith Packard <keithp@keithp.com>
34599 commit 359ba0d9fc2c5947e6adc98bebcd061069c61e79
34600 Author: Keith Packard <keithp@keithp.com>
34601 Date: Fri Apr 1 14:04:58 2011 -0700
34603 altos: expose set of available stdio values
34605 This lets external code manipulate which connection to communicate
34608 Signed-off-by: Keith Packard <keithp@keithp.com>
34610 commit ce18eaa28b1385c962c09459cbc5f20e234d9ad5
34611 Author: Keith Packard <keithp@keithp.com>
34612 Date: Fri Apr 1 14:03:25 2011 -0700
34614 altos: Add P2SEL_*_MASK defines to cc1111.h
34616 These are used to avoid having the code "know" which selections are 1
34617 and which are 0 bits.
34619 Signed-off-by: Keith Packard <keithp@keithp.com>
34621 commit 8e74cf6d1c70a7a17d01c20f6831571245392498
34622 Author: Keith Packard <keithp@keithp.com>
34623 Date: Thu Mar 31 20:58:14 2011 -0700
34625 altos: Add initial TeleBT code
34627 Prototyping with a TeleMetrum v0.1 board and a serial link to a
34630 Signed-off-by: Keith Packard <keithp@keithp.com>
34632 commit c0971abc02b05d136aea257f3f40ba3b22b1d441
34633 Author: Keith Packard <keithp@keithp.com>
34634 Date: Thu Mar 31 20:55:18 2011 -0700
34636 altos: Make ao_flight_test show true height but report saturated height
34638 To simulate a saturated baro sensor, clip baro data at a specified
34639 altitude. Continue to report the 'true' altitude in the output so that
34640 the resulting graphs are useful.
34642 Signed-off-by: Keith Packard <keithp@keithp.com>
34644 commit 8a14142e7b37031a51409f121b913fe793bf3603
34645 Author: Keith Packard <keithp@keithp.com>
34646 Date: Thu Mar 31 20:53:12 2011 -0700
34648 altos: Baro useful ceiling is MSL, not AGL
34650 Use MSL instead of AGL for detecting over-range baro sensor values.
34651 Always trust baro sensor during descent; it'll get there eventually.
34653 Signed-off-by: Keith Packard <keithp@keithp.com>
34655 commit a9dae18a664f70b668159487015e61be7f776926
34656 Author: Keith Packard <keithp@keithp.com>
34657 Date: Thu Mar 31 20:51:15 2011 -0700
34659 altos: Reflect ao_flight split in ao_flight_test dependencies
34661 Need to rebuild ao_flight_test when any of the flight sources change
34663 Signed-off-by: Keith Packard <keithp@keithp.com>
34665 commit f558cfa1df77c36a459168c1953d0945ee5a7f9f
34666 Author: Keith Packard <keithp@keithp.com>
34667 Date: Wed Mar 30 11:48:03 2011 -0700
34669 altosui: Only plot acceleration when present in data file
34671 Eliminates a bogus axis and data line for devices which do not have an
34674 Signed-off-by: Keith Packard <keithp@keithp.com>
34676 commit a9df9fc257eb2d7038d66ac7c2539aae4474bf12
34677 Author: Keith Packard <keithp@keithp.com>
34678 Date: Wed Mar 30 11:47:07 2011 -0700
34680 altosui: Parse and export Max flight log value
34682 New configuration field might as well get dumped to the .csv files.
34684 Signed-off-by: Keith Packard <keithp@keithp.com>
34686 commit 87bff181a95f6bf92c2cec350d331ba6af779e80
34687 Author: Keith Packard <keithp@keithp.com>
34688 Date: Tue Mar 29 18:11:47 2011 -0700
34690 altos: Enable logging during nano flights
34692 Not having logging wasn't very useful.
34694 Signed-off-by: Keith Packard <keithp@keithp.com>
34696 commit 011e37f27b3926a42c8c1a74e0f179bb48829ec7
34697 Author: Keith Packard <keithp@keithp.com>
34698 Date: Tue Mar 29 18:10:46 2011 -0700
34700 altos: Run RDF beacon after apogee instead of waiting for landing
34702 This provides tracking when GPS fails, or on TeleMini.
34704 Signed-off-by: Keith Packard <keithp@keithp.com>
34706 commit 08e6bbef2c3529dfd468ef221c526fc9f3ed5b81
34707 Author: Keith Packard <keithp@keithp.com>
34708 Date: Tue Mar 29 10:08:46 2011 -0700
34710 altos: ao_sample_preflight was exiting preflight mode immediately
34712 Need to stay in pre-flight mode until we've gotten enough sensor data
34713 to calibrate things appropriately. The conversion from a unified
34714 ao_flight.c file was just broken here.
34716 Signed-off-by: Keith Packard <keithp@keithp.com>
34718 commit 56d045040c49728a854741e99545766f3723da5e
34719 Author: Keith Packard <keithp@keithp.com>
34720 Date: Tue Mar 29 09:39:27 2011 -0700
34722 altosui: Don't display 0000-00-00 for missing flight log dates
34724 With Tm/Tn not having GPS to get the current date, it's no longer
34725 unusual to have no date for a flight log, so don't show the 0000-00-00
34726 piece in that case.
34728 Signed-off-by: Keith Packard <keithp@keithp.com>
34730 commit 8ade7d99f02df825e70d0a964b4648156101ef78
34731 Author: Keith Packard <keithp@keithp.com>
34732 Date: Tue Mar 29 09:38:23 2011 -0700
34734 altosui: Display exception messages from swing thread
34736 Flight log management exceptions were getting displayed from the log
34737 serial I/O thread instead of the swing thread. That's a bad plan.
34739 Signed-off-by: Keith Packard <keithp@keithp.com>
34741 commit 2f9be009ef26e3d7539f5932d267d7a8a7bcb7eb
34742 Author: Keith Packard <keithp@keithp.com>
34743 Date: Tue Mar 29 09:37:11 2011 -0700
34745 altosui: Make deployment testing handle Connecting... dialog
34747 Supporting the Connecting... dialog requires moving all serial
34748 communication to a separate thread. This was done by creating a worker
34749 thread and command queue to communicate between the UI and the serial line.
34751 Signed-off-by: Keith Packard <keithp@keithp.com>
34753 commit 573edcd7dfe10ac3251396eae88eece55d82bcb6
34754 Author: Keith Packard <keithp@keithp.com>
34755 Date: Mon Mar 28 23:38:02 2011 -0700
34757 altosui: Make flight log downloading handle 'Connecting...' dialog
34759 This required moving all of the serial communication to a separate
34760 thread and making the bulk of the download operation run after that
34763 Signed-off-by: Keith Packard <keithp@keithp.com>
34765 commit c71a145daefb86d2c1297abec68e54bd951e3adf
34766 Author: Keith Packard <keithp@keithp.com>
34767 Date: Mon Mar 28 23:35:05 2011 -0700
34769 altosui: Clean up packet link connecting dialog
34771 Make sure the dialog is destroyed after use (otherwise, it hangs
34772 around on the screen sometimes).
34774 Switch timeout before showing dialog to 500ms -- that brings the
34775 dialog up less often when unnecessary.
34777 Use 'timeout_started' boolean to indicate whether the I/O thread has
34778 queued the dialog for display and whether it needs to queue a call to
34781 Signed-off-by: Keith Packard <keithp@keithp.com>
34783 commit c6e7e812d67f91c63ba4982f7a899a72584027de
34784 Author: Keith Packard <keithp@keithp.com>
34785 Date: Mon Mar 28 18:18:50 2011 -0700
34787 altos: Create custom nano flight code
34789 No igniters, just 'pad/drogue/landed' modes (where 'drogue' ==
34790 'flying'). A constant 1Hz telemetry and RDF rate.
34792 Signed-off-by: Keith Packard <keithp@keithp.com>
34794 commit c754759a2d503633d527da4ebb20eb859cd506fd
34795 Author: Keith Packard <keithp@keithp.com>
34796 Date: Mon Mar 28 17:54:44 2011 -0700
34798 altos: Split up flight code into separate flight/sample/kalman bits
34800 The flight code mashed together data processing, filtering and actual
34801 flight managament into one giant pile. Split things up so that we
34804 ao_sample.c: Sensor data processing. Reads the ring, handles calibration
34805 ao_kalman.c: Filter the data to track the accel/speed/height values
34806 ao_flight.c: Flight state management, specific to rocketry.
34808 The plan is to re-use ao_sample.c and ao_kalman.c for hardware not
34809 specifically designed for rocketry, like TeleNano.
34811 Signed-off-by: Keith Packard <keithp@keithp.com>
34813 commit 006de838bbb096b9443863a46b8a125b1e6b5600
34814 Author: Keith Packard <keithp@keithp.com>
34815 Date: Sun Mar 27 00:48:07 2011 -0700
34817 altosui: Handle serial calls from swing thread
34819 Calls from the swing thread cannot be canceled as there's no way to
34820 put up the cancel dialog. In this case, simply use the 5 second
34821 timeout and fail if no communication occurs within that amount of time.
34823 Signed-off-by: Keith Packard <keithp@keithp.com>
34825 commit f23d0f3cbf1fb0c8eab497e266625f6410b69ba3
34826 Author: Keith Packard <keithp@keithp.com>
34827 Date: Sun Mar 27 00:46:19 2011 -0700
34829 altosui: Tell serial device which frame to use for timeout dialogs
34831 For the timeout dialog to appear, a frame must be configured for it to
34832 appear near. This patch sends the frame from the eeprom download
34833 functions to the serial code. That path doesn't yet work as the eeprom
34834 download is still trying to talk to the serial device from the swing
34835 event thread, which prevents the cancel dialog from working.
34837 Signed-off-by: Keith Packard <keithp@keithp.com>
34839 commit 067b21993e9a97fceadb355e571e5610535336a8
34840 Author: Keith Packard <keithp@keithp.com>
34841 Date: Sun Mar 27 00:13:38 2011 -0700
34843 altosui: Allow radio channel to be configured over the radio link
34845 TeleMini/TeleNano can't be configured via USB, so we need to allow
34846 the radio channel to be set over the radio link.
34848 This change carefully sets the new radio channel, disables the remote
34849 link and then sets the teledongle channel to the new value and brings
34852 Signed-off-by: Keith Packard <keithp@keithp.com>
34854 commit 91a75279b6d306ba9d068a28c64917d5312122e8
34855 Author: Keith Packard <keithp@keithp.com>
34856 Date: Sun Mar 27 00:12:01 2011 -0700
34858 altosui: Off-by-one error in telemetry format configuration UI
34860 The telemetry format menu uses 0 for full and 1 for tiny, but the
34861 telemetry configuration uses 1 for full and 2 for tiny. One direction
34862 (config to UI) was right, the other (UI to config) was wrong.
34864 Signed-off-by: Keith Packard <keithp@keithp.com>
34866 commit 7ce8c9081e703d1405c2595ab9bda0cfa218c6c4
34867 Author: Keith Packard <keithp@keithp.com>
34868 Date: Sat Mar 26 23:38:54 2011 -0700
34870 altos: full logging must flush pending data before checking state
34872 Flight state must be checked only after any pending data have been
34873 written to the log as the 'current' flight state is only valid when
34874 the pending data values have been processed. This ensures that the
34875 'boost' state is not marked until the full ring of data is
34876 written. This ensures that the data processing code can find the
34877 barometer values from before boost to get an idea of the ground
34880 Signed-off-by: Keith Packard <keithp@keithp.com>
34882 commit 3945d8f986d8f4bd3186a2cbaed5186e49d59839
34883 Author: Keith Packard <keithp@keithp.com>
34884 Date: Sat Mar 26 23:15:36 2011 -0700
34886 altos: Variable log rate in full logging code too
34888 With the fixed ADC rate used to get better data during flight, the
34889 logging code now needs to vary the data storage rate so that descent
34890 data is recorded at 10 samples/second while ascent data is recorded at
34891 1 sample per second. Having the logging code do this itself eliminates
34892 any interaction with the flight code.
34894 Signed-off-by: Keith Packard <keithp@keithp.com>
34896 commit 97517ee585462c2d355f23f999fb8d9ebd908ec1
34897 Author: Keith Packard <keithp@keithp.com>
34898 Date: Sat Mar 26 00:01:22 2011 -0700
34900 altosui: Allow TM config connection to be canceled.
34902 This leaves the config UI connection attempt running and pops up a
34903 dialog box when it takes 'too long' in the remote case so that users
34904 with Tm or Tn devices can bring up the UI, and then boot the Tm/Tn
34905 without needing to time things carefully.
34907 Signed-off-by: Keith Packard <keithp@keithp.com>
34909 commit 2c121f1ef495e8af3eb39210baa40e212b691894
34910 Author: Keith Packard <keithp@keithp.com>
34911 Date: Fri Mar 25 22:04:09 2011 -0700
34913 altosui: swing hide/show methods are deprecated
34915 I don't know why, but they are, so just replace them with
34918 Signed-off-by: Keith Packard <keithp@keithp.com>
34920 commit b155647472ddfacb07c5ffa832e4d1f4a13ad342
34921 Author: Keith Packard <keithp@keithp.com>
34922 Date: Fri Mar 25 22:01:18 2011 -0700
34924 altosui: Remove extra AltosEepromBlock layer
34926 This was interposed between the download layer and the eeprom layer to
34927 hold a eeprom block full of flight log records. The addition of the tiny
34928 log format required reworking the code to hold chunks full of eeprom
34929 data without regard to their content, so this content-specific layer
34930 didn't seem useful anymore.
34932 Signed-off-by: Keith Packard <keithp@keithp.com>
34934 commit 011615d40b3cb1d1c0ab9fa41e139e263a6a51e7
34935 Author: Keith Packard <keithp@keithp.com>
34936 Date: Fri Mar 25 21:34:31 2011 -0700
34938 altosui: Add support for downloading TeleMini/TeleNano flight logs
34940 Splits the eeprom downloading code into eeprom block downloading and
34941 separate eeprom data parsing so that the new data logging format can
34942 share the data downloading code.
34944 Signed-off-by: Keith Packard <keithp@keithp.com>
34946 commit dea80af81b388cc3d7073444919f4e98b12fa730
34947 Author: Keith Packard <keithp@keithp.com>
34948 Date: Fri Mar 25 21:29:50 2011 -0700
34950 altosui: Remove a bunch of debug printfs from the eeprom manager code
34952 Just noise on stdout.
34954 Signed-off-by: Keith Packard <keithp@keithp.com>
34956 commit 7f5b5848ad6ef5c808638a29c3dc0101b56ed11e
34957 Author: Keith Packard <keithp@keithp.com>
34958 Date: Thu Mar 24 08:08:43 2011 +0900
34960 altosui: Add telemetry format menu and preferences
34962 Switches the TeleDongle between full and tiny telemetry packet
34963 formats, saving the last used format for each teledongle in the
34964 application preferences.
34966 Signed-off-by: Keith Packard <keithp@keithp.com>
34968 commit f3e68341f6f5daaf26dd162e4f9a06c29988986a
34969 Author: Keith Packard <keithp@keithp.com>
34970 Date: Thu Mar 24 05:27:57 2011 +0900
34972 altosui: Add support for telemetry version 4
34974 New telemetry format needed to support TeleNano and TeleMini
34976 Signed-off-by: Keith Packard <keithp@keithp.com>
34978 commit 1e976a105423f2da1842f70da531c9051ba88a7f
34979 Author: Keith Packard <keithp@keithp.com>
34980 Date: Wed Mar 23 10:42:31 2011 +0900
34982 Add description to test flights
34984 commit 93040ef4d0bd90ec5ae052f22243cd56adfb300a
34985 Author: Keith Packard <keithp@keithp.com>
34986 Date: Wed Mar 23 10:40:05 2011 +0900
34988 Add ao_kalman.h to .gitignore
34990 commit 43a94380032300a2e33e1faa1efe93e858e0a2cf
34991 Author: Keith Packard <keithp@keithp.com>
34992 Date: Wed Mar 23 10:37:39 2011 +0900
34994 altos: Exit flight test at landing. Allow description in test flight list
34996 Signed-off-by: Keith Packard <keithp@keithp.com>
34998 commit 32364c9e0d346e0e5d517e18d4e90b8ff2fa944f
34999 Author: Keith Packard <keithp@keithp.com>
35000 Date: Wed Mar 23 10:33:38 2011 +0900
35002 altos: Ignore alt error for fast->coast. Allow larger error for baro apogee.
35004 With the fixed kalman filter, transitions across mach don't cause
35005 bumps in the merged filter.
35007 And, with working kalman bits, the signal for broken baro detection is
35008 stronger and so we can allow for baro apogee detection in cases where
35009 noise occurs close to apogee.
35011 Bump the kalman filter to trust the baro less so that the model tracks
35014 Signed-off-by: Keith Packard <keithp@keithp.com>
35016 commit 3d2042ccc2d29e4cb8ea39c5c69d07cb7e3daeea
35017 Author: Keith Packard <keithp@keithp.com>
35018 Date: Tue Mar 22 16:55:08 2011 +0900
35020 altos: Restore sensible kalman values
35022 Now that the kalman code seems to work correctly, restore the sensor
35023 errors and model errors to match reality
35025 Signed-off-by: Keith Packard <keithp@keithp.com>
35027 commit 7d7b476564a16eda81ab3406f70a21995e1b464e
35028 Author: Keith Packard <keithp@keithp.com>
35029 Date: Tue Mar 22 21:51:52 2011 +0900
35031 altos: Fix up flight code testing
35033 This automates flight code testing by reporting mis-detected apogee or
35036 Signed-off-by: Keith Packard <keithp@keithp.com>
35038 commit a80d3836cfce3d4cfa7a71068539415c2dc421cd
35039 Author: Keith Packard <keithp@keithp.com>
35040 Date: Tue Mar 22 21:50:29 2011 +0900
35042 altos: Missing parens and some bad arithmetic in the kalman code
35044 Fixed point computations are a pain.
35046 Signed-off-by: Keith Packard <keithp@keithp.com>
35048 commit f30de5766c1eefb18c7d024a2cf10ce02de41071
35049 Author: Keith Packard <keithp@keithp.com>
35050 Date: Tue Mar 22 21:29:05 2011 +0900
35052 altos: Add ao_flight_debug code
35054 Trace the kalman filter to make sure it's working.
35056 Signed-off-by: Keith Packard <keithp@keithp.com>
35058 commit f3053b1f3c85d4fd84b3c6cc87858f433166df34
35059 Author: Keith Packard <keithp@keithp.com>
35060 Date: Tue Mar 22 17:04:07 2011 +0900
35062 altos: Clean up some debug stuff in ao_flight.c
35064 Remove some spurious printf debugging.
35065 Remove an attempt at discovering broken accelerometer code.
35067 Signed-off-by: Keith Packard <keithp@keithp.com>
35069 commit 6864e06d88a5b908cffa7c4cd2be8969ff46ce4d
35070 Author: Keith Packard <keithp@keithp.com>
35071 Date: Tue Mar 22 16:51:04 2011 +0900
35073 altos/kalman: Kalman terms can be > 1, use 32-bit fixed point
35075 Because speed and acceleration are scaled by 16, it's fairly common
35076 for the kalman terms to end up larger than 1. Instead of trying to
35077 fuss with 16-bit values and shifts, just use 32-bit values.
35079 Signed-off-by: Keith Packard <keithp@keithp.com>
35081 commit c14d6c5ace1d67bd948273ceb7eb6807b29c3806
35082 Author: Keith Packard <keithp@keithp.com>
35083 Date: Tue Mar 22 08:51:23 2011 +0900
35085 altos: Compute a 'trust' value for the barometer
35087 Instead of making the baro use/don't-use decision binary, use a 'trust
35088 value' which slowly migrates from baro+accel to accel-only mode. This
35089 eliminates bumps in the data from a rapid shift.
35091 Signed-off-by: Keith Packard <keithp@keithp.com>
35093 commit 7b009b2efe3af8722c358c304c2243652594e0d5
35094 Author: Keith Packard <keithp@keithp.com>
35095 Date: Tue Mar 22 05:42:51 2011 +0900
35097 altos: Switch telemetrum over to kalman filter
35099 This changes the full telemetry stream to include kalman data instead
35100 of the old ad-hoc flight data. It's compatible in that the packet
35101 sizes are the same so teledongle can receive either and figure out
35102 which it has received.
35104 A few plotting and testing tools are added to make validating the new
35107 Signed-off-by: Keith Packard <keithp@keithp.com>
35109 commit 20427ae4965f756aac0cedc5179a1c45b9a781f2
35110 Author: Keith Packard <keithp@keithp.com>
35111 Date: Mon Mar 21 19:59:27 2011 +0900
35113 altos: Add nickle kalman implementation.
35115 This generates the constants needed to implement Kalman filtering in
35116 the flight firmware.
35118 Signed-off-by: Keith Packard <keithp@keithp.com>
35120 commit ca3f03ef5c09446bebf0f5734f36a0248c457b1d
35121 Author: Keith Packard <keithp@keithp.com>
35122 Date: Sat Mar 19 23:55:39 2011 -0700
35124 altos: Add .sdcdbrc file for teledongle
35126 My sdcdb script uses this to set command line options automatically
35128 Signed-off-by: Keith Packard <keithp@keithp.com>
35130 commit be838db49d999426a9dd02c0166fe161722f1e61
35131 Author: Keith Packard <keithp@keithp.com>
35132 Date: Sat Mar 19 23:53:08 2011 -0700
35134 altos: New telemetry report format (version 4). Supports tiny telemetry.
35136 This completely replaces the version 3 format with a much simpler and
35137 easier to parse scheme. It's described in detail in ao_telem.h, but
35138 the basic idea is that the whole line is split into name/value pairs,
35139 separated by whitespace. Every name is unique, and the values are
35140 either strings or integers. No extraneous formatting or units are
35143 Signed-off-by: Keith Packard <keithp@keithp.com>
35145 commit ad6bb342d237988404fa32540b38c61d6ddc1f0d
35146 Author: Keith Packard <keithp@keithp.com>
35147 Date: Sat Mar 19 23:51:02 2011 -0700
35149 altos: The kalman code requires a constant sample rate
35151 The kalman function can't handle a variable sample rate, so keep the
35152 ADC running at full speed for the whole flight instead of slowing it
35155 Signed-off-by: Keith Packard <keithp@keithp.com>
35157 commit 31feb7777f73fed61193d3404f457ea1a081fe9c
35158 Author: Keith Packard <keithp@keithp.com>
35159 Date: Sat Mar 19 23:49:41 2011 -0700
35161 altos: Split telenano main from telemini
35163 Eventually, telenano will run different code; prepare for this by
35164 creating a telenano-specific main routine.
35166 Signed-off-by: Keith Packard <keithp@keithp.com>
35168 commit 8950df02382f5f0aea5bac078fdf7134b98c43ed
35169 Author: Keith Packard <keithp@keithp.com>
35170 Date: Sat Mar 19 23:46:18 2011 -0700
35172 altos: Split out tiny telemetry from full telemetry
35174 The TeleMini and TeleNano boards do not have either GPS or
35175 accelermeters, and they also run the kalman filter which produces
35176 standard unit measurements for the flight height/speed/accel
35177 values. This makes the telemetry significantly
35178 different. ao_telemetry_tiny.c sends the required data.
35180 Note that TeleNano sends the same telemetry as telemini at this point;
35181 there are a couple of values which are not useful, but the overhead of
35182 sending them is small enough that the hassle of having three telemetry
35183 formats seemed excessive.
35185 Signed-off-by: Keith Packard <keithp@keithp.com>
35187 commit 5ba75e95c98d3e441a58d6f75d328d579e1997fe
35188 Author: Keith Packard <keithp@keithp.com>
35189 Date: Sat Mar 19 23:41:44 2011 -0700
35191 altos: Make telemetry interval more consistent
35193 Instead of using a delay between telemetry packets, use a telemetry
35194 period and compute an appropriate delay each time. This requires
35195 changing the ascent telemetry from a 50ms delay to a 100ms interval,
35196 to provide a regular 10 packets-per-second rate. Before, we counted on
35197 the telemetry packet taking about 50ms to send so that we would
35198 receive about 10 per second.
35200 This also eliminates delays during descent for RDF tones -- those will
35201 get transmitted in the interval between telemetry packets without
35202 interrupting the spacing of those packets.
35204 Signed-off-by: Keith Packard <keithp@keithp.com>
35206 commit 3f0bc801fd08a613c681504f0d1f9374486a2487
35207 Author: Keith Packard <keithp@keithp.com>
35208 Date: Sat Mar 19 23:31:20 2011 -0700
35210 altos: Configure packet size from send/recv parameters.
35212 Instead of setting the packet size at configuration time, use the
35213 provided packet size to the send/recv functions to configure the
35214 radio. This eliminates many configuration calls, leaving us with 'RDF'
35215 mode and 'packet' mode, the latter working for telemetry and the
35216 bi-directional link.
35218 Signed-off-by: Keith Packard <keithp@keithp.com>
35220 commit 5c28b9312d90a3a66016abc641c20bcd852d69f8
35221 Author: Keith Packard <keithp@keithp.com>
35222 Date: Sat Mar 19 23:27:15 2011 -0700
35224 altos: Don't init packet slave on TD. Make slave start optional
35226 Oops. TeleDongle was starting the packet slave code, which kinda
35227 wrecked its ability to receive telemetry packets. This patch simply
35228 removes the packet slave code from teledongle as it cannot be used
35229 (yet), it also makes the packet slave code initialization take a
35230 parameter which controls whether to start that by default; in the
35231 future, perhaps TeleDongle will gain a command to start packet slave mode.
35233 Signed-off-by: Keith Packard <keithp@keithp.com>
35235 commit e980b251e5a4d25410710a9aa89ef940e06b0d93
35236 Author: Keith Packard <keithp@keithp.com>
35237 Date: Sat Mar 19 18:43:52 2011 -0700
35239 altosui: Add software version to Configure AltosUI dialog
35241 Show this somewhere so we can figure out what is installed.
35243 Signed-off-by: Keith Packard <keithp@keithp.com>
35245 commit 1aeb759c48f475ffaaae787515e080440c8386c3
35246 Author: Keith Packard <keithp@keithp.com>
35247 Date: Sat Mar 19 12:28:08 2011 -0700
35249 altos: Baro-only boards must not detect launch on accel or speed data
35251 The baro sensor generates too much noise to use small changes in
35252 computed speed or acceleration to cause a false launch detect.
35254 Signed-off-by: Keith Packard <keithp@keithp.com>
35256 commit 7a4f6d5ad55637cde97a1e2f247f92df59bc2e14
35257 Author: Keith Packard <keithp@keithp.com>
35258 Date: Fri Mar 18 21:01:15 2011 -0700
35260 altos: Write height values to log for nano/mini
35262 This is a lot more useful than the old filtered pressure data.
35264 Signed-off-by: Keith Packard <keithp@keithp.com>
35266 commit c985bb6a19c710409629f3c095332ba7afcf5248
35267 Author: Keith Packard <keithp@keithp.com>
35268 Date: Fri Mar 18 20:36:59 2011 -0700
35270 altos/test: Add scripts to run lots of flights through the code
35272 This runs a long list of flights (there's a user-specific path
35273 pointing at the flights) and squawks if the baro and dual flight
35274 computers don't match.
35276 Signed-off-by: Keith Packard <keithp@keithp.com>
35278 commit dbe915795c66995805b5f37e6eb698cf2c143e61
35279 Author: Keith Packard <keithp@keithp.com>
35280 Date: Fri Mar 18 20:26:12 2011 -0700
35282 altos: Fix mini/nano default log size to available flash space
35284 Also, remove accel cal code from boards without accel
35286 Signed-off-by: Keith Packard <keithp@keithp.com>
35288 commit 5db94e1e230bade966a997aa83165405a9ec9d83
35289 Merge: 1a8f45e cbb968f
35290 Author: Bdale Garbee <bdale@gag.com>
35291 Date: Fri Mar 18 21:12:39 2011 -0600
35293 Merge branch 'telemini' of ssh://git.gag.com/scm/git/fw/altos into telemini
35295 commit 1a8f45e7b720d01d3ff0c35ed1caaf8cbe0c3119
35296 Author: Bdale Garbee <bdale@gag.com>
35297 Date: Fri Mar 18 21:12:12 2011 -0600
35299 fix up script to work and have reasonable texts
35301 commit cbb968f5cf03625d453d84dc535758072a2c04c7
35302 Author: Keith Packard <keithp@keithp.com>
35303 Date: Fri Mar 18 20:07:25 2011 -0700
35305 altos: Add TeleNano support
35307 This just uses the TeleMini bits, which should work fine for now.
35309 Signed-off-by: Keith Packard <keithp@keithp.com>
35311 commit 32c51840c792a737019fbc9fe42f2ca073b71827
35312 Author: Keith Packard <keithp@keithp.com>
35313 Date: Fri Mar 18 19:49:46 2011 -0700
35315 altos: Tiny logging fixes. Scan at start, stop when land or full.
35317 Initialize the flight log for tiny systems by scanning the log area to
35318 find the current flight number and log area bounds.
35320 Stop logging data when the flight is over, or when the log area is
35323 Signed-off-by: Keith Packard <keithp@keithp.com>
35325 commit 62eae8a17d870e8ac6937ba23da01a5fbc652c6c
35326 Author: Keith Packard <keithp@keithp.com>
35327 Date: Fri Mar 18 16:53:11 2011 -0700
35329 altos: Add kalman filters for baro-only boards
35331 This adds a baro-only kalman filter to track the state of the rocket,
35332 and then uses it to control flight events instead of the existing
35335 Signed-off-by: Keith Packard <keithp@keithp.com>
35337 commit c826fab31f8aea25a942b6bb8435d4b04c1bef10
35338 Author: Keith Packard <keithp@keithp.com>
35339 Date: Thu Mar 17 16:00:10 2011 -0700
35341 altos: Add tiny logging for TeleMini/TeleNano
35343 This splits the logging code into management of the log space within
35344 storage and separate code to actually write suitable log entries. A
35345 new log writing module, ao_log_tiny, is added which writes only
35346 altimeter data at a fairly low data rate for devices using on-chip
35349 Signed-off-by: Keith Packard <keithp@keithp.com>
35351 commit 8b546b474b7b6c5b4169b4c1ca09c6f17ebb3ae5
35352 Author: Anthony Towns <aj@erisian.com.au>
35353 Date: Fri Mar 11 21:41:01 2011 +1000
35355 ignore new flight test file
35357 commit 82707a05af0eb2d54f46b58805c95cdf4e5a3703
35358 Author: Keith Packard <keithp@keithp.com>
35359 Date: Wed Mar 16 20:36:50 2011 -0700
35361 altos: Internal flash ops block when running from flash
35363 The docs say that if you are executing from flash, then the CPU will
35364 stall after a flash write or erase command is started until the
35365 operation is complete. Take advantage of that to simplify the flash
35368 Signed-off-by: Keith Packard <keithp@keithp.com>
35370 commit 1d8579f973bfe1047ee91f03555e74abdc483e69
35371 Author: Keith Packard <keithp@keithp.com>
35372 Date: Mon Mar 7 16:31:43 2011 -0800
35374 altos: oops -- altitude reporting wasn't pausing between signals
35376 need to actually alternate the LED/tone with some space so you can
35379 Signed-off-by: Keith Packard <keithp@keithp.com>
35381 commit d007bccf6cb36d24a9c7c48de7d80759ac6f2e37
35382 Author: Keith Packard <keithp@keithp.com>
35383 Date: Mon Mar 7 15:57:58 2011 -0800
35385 ao-load: Make usb descriptor rewriting optional
35387 TeleMini and TeleNano don't have USB descriptors to rewrite when
35388 loading firmware, so allow them to be missing.
35390 Signed-off-by: Keith Packard <keithp@keithp.com>
35392 commit 57d83f51377fb58018f422e42d74f29b86a821d2
35393 Author: Keith Packard <keithp@keithp.com>
35394 Date: Mon Mar 7 15:26:41 2011 -0800
35396 bringup: Add script for telemini
35398 Copied from teledongle with a few obvious changes.
35400 Signed-off-by: Keith Packard <keithp@keithp.com>
35402 commit ddd7485f05d0cad8f5b3e1ee9b9a4d2812ea1837
35403 Author: Keith Packard <keithp@keithp.com>
35404 Date: Mon Mar 7 08:03:11 2011 -0800
35406 altos: Switch pins around for TeleMini
35408 TeleMini has fewer sensors and uses P0 for igniters instead of P2.
35410 Signed-off-by: Keith Packard <keithp@keithp.com>
35412 commit f8afc2641c779fc312a42a6358187d8716ebe61a
35413 Author: Keith Packard <keithp@keithp.com>
35414 Date: Sun Mar 6 23:52:11 2011 -0800
35416 altos: Switch LED usage for TeleMini around
35418 We're using the LEDs instead of tones, so make red mean 'low tone',
35419 green mean 'middle tone' and both mean 'high tone'.
35421 Signed-off-by: Keith Packard <keithp@keithp.com>
35423 commit fc5d014721a7e5a7b22f07eb4ab0bb3c764473fe
35424 Author: Anthony Towns <aj@erisian.com.au>
35425 Date: Sat Feb 26 16:06:48 2011 +1000
35427 ao_intflash: Avoid overwriting code
35429 Require firmware to specify the end of its codespace in its Makefile,
35430 and use this to determine where the start of available flash is. Should
35431 give compile time errors if either there's no room left for storage, or
35432 if there's not enough room for code.
35434 commit 0e4c55d78852415e79f7318471f4d00c89703b78
35435 Author: Keith Packard <keithp@keithp.com>
35436 Date: Sun Mar 6 21:03:57 2011 -0800
35438 altos: Add TeleMini v1.0
35440 This adds initial code for the telemini board, a two channel
35441 flight computer with digital telemetry and a barometric sensor.
35443 Signed-off-by: Keith Packard <keithp@keithp.com>
35445 commit 2d41358c80f2eb8b6e98d699149bb941a6671475
35446 Author: Keith Packard <keithp@keithp.com>
35447 Date: Sun Mar 6 21:00:52 2011 -0800
35449 altos: Start with packet slave running. Turn off in pad mode.
35451 Instead of turning slave mode on in idle mode, start with it running
35452 and disable it in pad mode instead. This means packet mode is
35453 available in startup mode too.
35455 Signed-off-by: Keith Packard <keithp@keithp.com>
35457 commit 1e56ed44e562f808addfd76bfb352f981db94094
35458 Author: Keith Packard <keithp@keithp.com>
35459 Date: Sun Mar 6 21:59:08 2011 -0800
35461 altos/test: Add baro-only flight test program
35463 This builds the flight code in baro-only mode for testing.
35465 Signed-off-by: Keith Packard <keithp@keithp.com>
35467 commit e339ffd8bd8b9e3f4758017ba355028000cb612e
35468 Author: Keith Packard <keithp@keithp.com>
35469 Date: Sun Mar 6 21:57:52 2011 -0800
35471 altos/test: Use ao_convert.c instead of hand-coded pres → alt func
35473 Fix up ao_convert.c so that it can be used within the flight test code
35474 instead of having a (broken) copy of the code there.
35476 Signed-off-by: Keith Packard <keithp@keithp.com>
35478 commit 02611efea0c485d78fad08c696c1f56e868d36b8
35479 Author: Keith Packard <keithp@keithp.com>
35480 Date: Sun Mar 6 20:56:25 2011 -0800
35482 altos: Make serial, usb, beeper and accelerometer optional components
35484 Not all boards will have these, so fix places that use them to deal
35487 Signed-off-by: Keith Packard <keithp@keithp.com>
35489 commit fdd15a254c6fab5ba2d02320ba0ceb3e6a56354c
35490 Author: Anthony Towns <aj@erisian.com.au>
35491 Date: Sat Feb 26 11:48:30 2011 +1000
35493 ao_intflash: Use internal flash for storage
35495 Makes any free pages at end of CC1111's internal flash available via
35496 the ao_storage API.
35498 commit 8f1bd11b61d9423c62162f7bbe573fc69fd75269
35499 Author: Keith Packard <keithp@keithp.com>
35500 Date: Wed Mar 16 14:10:06 2011 -0700
35502 aoview: remove -s option.
35504 commit 45395c7825184efb835d5b165fa132be20c7f6fe
35505 Author: Keith Packard <keithp@keithp.com>
35506 Date: Wed Mar 16 14:08:42 2011 -0700
35508 Bump published version number to 0.9.1
35510 commit 9f3d26cadf37880d2c9223f59271d295b11c4c2a
35511 Author: Keith Packard <keithp@keithp.com>
35512 Date: Wed Mar 16 14:05:13 2011 -0700
35514 altosui: Missed jcommon.jar in the Mac OS install image
35516 This caused graphing to fail on Mac OS X
35518 Signed-off-by: Keith Packard <keithp@keithp.com>
35520 commit 6e340c87d3198647cf075ed520a82703b0d59beb
35521 Author: Keith Packard <keithp@keithp.com>
35522 Date: Mon Mar 7 00:26:17 2011 -0800
35524 altos: Oops. Lost a couple of commands when merging the doc patch
35526 I didn't merge this carefully enough and managed to lose the 'f'
35527 and 'e' commands, which are kinda useful.
35529 Signed-off-by: Keith Packard <keithp@keithp.com>
35531 commit 8cdf4fb051c22b35c251d90bc288551f7c2898bf
35532 Author: Anthony Towns <aj@erisian.com.au>
35533 Date: Sun Feb 27 11:11:12 2011 +1000
35535 src/ao_cmd: Shave off bytes from doc strings
35537 Switch to using { func, "X args\0Desc" } to specify command, saving
35538 a char field by looking at help[0] instead, and reduce help length by
35539 doing alignment with printf instead of hardcoded spaces.
35541 commit 2cfe205de4242398e69c9e7c613af0d2a7094686
35542 Author: Keith Packard <keithp@keithp.com>
35543 Date: Mon Mar 7 00:01:01 2011 -0800
35545 Revert "src/ao_gps_skytraq.c: Update logging rate to 10Hz"
35547 This reverts commit b080e933a65d268aaaec8cfd5f617a13d5babc43.
35549 10Hz data isn't any better than 1Hz data; it still doesn't like going
35552 commit 249cd3b63d97581b068fff988e0cd7fcd5bf493e
35553 Author: Keith Packard <keithp@keithp.com>
35554 Date: Sat Feb 19 01:06:01 2011 -0800
35556 altosui: Display eeprom parsing errors to user
35558 When reading the eeprom, any parsing errors (most likely bad
35559 checksums) indicate some kind of problem with either the hardware or
35560 the flight software. Display these to the user and do not erase the
35563 Signed-off-by: Keith Packard <keithp@keithp.com>
35565 commit 629a7637871b24fe6d1204aaa7185d84933d4639
35566 Author: Keith Packard <keithp@keithp.com>
35567 Date: Sat Feb 19 01:04:19 2011 -0800
35569 altosui: Always read whole eeprom block, even at end of flight
35571 Instead of stopping early, continue reading the whole eeprom block so
35572 that the extra serial data doesn't end up confusing the next user of
35573 the serial line, which may well be reading the next flight.
35575 Signed-off-by: Keith Packard <keithp@keithp.com>
35577 commit 7ca2cf1b7e03b8453b45b45e313a33ad65da9ad5
35578 Author: Keith Packard <keithp@keithp.com>
35579 Date: Sat Feb 19 01:02:00 2011 -0800
35581 altosui: Mark empty eeprom records 'invalid', don't generate exception
35583 When reading empty eeprom records, mark them as 'invalid', but don't
35584 generate an exception as it's normal to read these at the end of the
35587 Signed-off-by: Keith Packard <keithp@keithp.com>
35589 commit 690feb166fd2bc6b6dfc26828f1efe9f5f1c6c0d
35590 Author: Bdale Garbee <bdale@gag.com>
35591 Date: Fri Feb 18 23:56:01 2011 -0700
35593 update changelogs for Debian build
35595 commit 0630e7d6d8cf6abf0fe07f9a6df40ee472cce1ef
35596 Author: Bdale Garbee <bdale@gag.com>
35597 Date: Fri Feb 18 19:54:18 2011 -0700
35599 tie bringup scripts to Bdale's bench TeleDongle
35601 commit b080e933a65d268aaaec8cfd5f617a13d5babc43
35602 Author: Anthony Towns <aj@erisian.com.au>
35603 Date: Sat Feb 19 05:49:15 2011 +1000
35605 src/ao_gps_skytraq.c: Update logging rate to 10Hz
35607 Send commands to skytraq to update baud rate to 57,600 bps, and
35608 set NMEA output rate to 10Hz.
35610 commit aad7103dcf44e69a5a30e008836cce5542ea33e2
35611 Author: Anthony Towns <aj@erisian.com.au>
35612 Date: Sat Feb 19 04:17:17 2011 +1000
35614 src/ao_gps_skytraq: simplify parsing code
35616 Added macros to make correctly constructing skytraq commands easier.
35617 Simplified code path for NMEA processing marginally.
35619 commit fe5123fa801f5dafed8b052da607899d1ef20500
35620 Author: Anthony Towns <aj@erisian.com.au>
35621 Date: Wed Feb 2 19:12:57 2011 +1000
35623 ao_radio: generalise setup of packet size
35625 commit 8b09cc1825645a57c256f38a2f9586ddecf6bda5
35626 Author: Keith Packard <keithp@keithp.com>
35627 Date: Fri Feb 18 10:02:46 2011 -0800
35629 altos/test: auto-configure acceleration parameters from the log file
35631 The flight test code had static accelerometer configuration values,
35632 making it impossible to use data from different boards without
35633 recompiling. As the eeprom and telem log files both contain the
35634 necessary data, parse that instead.
35636 Signed-off-by: Keith Packard <keithp@keithp.com>
35638 commit d3bc27fabb6159ce58b14d0f7929b0f46f67c378
35639 Author: Keith Packard <keithp@keithp.com>
35640 Date: Fri Feb 18 09:54:01 2011 -0800
35642 altos/test: Add dependencies in the Makefile for ao_flight_test
35644 Yes, it would be nice to automate dependency generation here, but I
35647 Signed-off-by: Keith Packard <keithp@keithp.com>
35649 commit c3080fdafff5212f267ba7c765a2f083435be799
35650 Author: Keith Packard <keithp@keithp.com>
35651 Date: Fri Feb 18 09:51:37 2011 -0800
35653 ao-load: fix usage message to note that '=' is required for options
35655 The usage message was suggesting incorrect command line syntax; long
35656 options use '=' between the option name and value, not whitespace.
35658 Signed-off-by: Keith Packard <keithp@keithp.com>
35660 commit a09501ab714c0638410d06f80903a8769d93c688
35661 Author: Bdale Garbee <bdale@gag.com>
35662 Date: Wed Jan 19 12:47:25 2011 -0700
35664 update changelogs for Debian build
35666 commit 2bb83d90aa03d825ca1b751418c91b194b72f1f9
35667 Author: Bdale Garbee <bdale@gag.com>
35668 Date: Wed Jan 19 12:46:02 2011 -0700
35670 elide changelog entries or re-release of 0.9
35672 commit 9541ccd9ff9e67e0862ca31706358d8308fc85d8
35673 Author: Bdale Garbee <bdale@gag.com>
35674 Date: Wed Jan 19 12:42:40 2011 -0700
35676 update turnon script to prefer TeleDongle as programmer
35678 commit 159fda30fe57349660c5e2d95017144ea3f5d7db
35679 Author: Bdale Garbee <bdale@gag.com>
35680 Date: Wed Jan 19 12:26:53 2011 -0700
35682 update changelogs for Debian build
35684 commit 97f4f2e0d28eec1cf19d2d25140e42f6ac277700
35685 Author: Keith Packard <keithp@keithp.com>
35686 Date: Wed Jan 19 11:21:52 2011 -0800
35688 altos: Program default flight log max value for new boards
35690 New boards have no config space values at all, and so they need each
35691 value to be set. Yes, this should be fixed so that there aren't two
35692 copies of these assignments.
35694 Signed-off-by: Keith Packard <keithp@keithp.com>
35696 commit 480587cf514ba21885b24c3b8fcb98d6b76ea8f4
35697 Author: Bdale Garbee <bdale@gag.com>
35698 Date: Wed Jan 19 00:05:25 2011 -0700
35700 update changelogs for Debian build
35702 commit 6244f2316267738781e31a773b377bcf8c476918
35703 Author: Bdale Garbee <bdale@gag.com>
35704 Date: Wed Jan 19 00:04:45 2011 -0700
35708 commit 3c72103866f041107af49e01a5ccb6d4e6b6ac80
35709 Author: Bdale Garbee <bdale@gag.com>
35710 Date: Tue Jan 18 23:55:42 2011 -0700
35712 update changelogs for Debian build
35714 commit 4ae724fe1d2ca0d712321c4fdc2200ff46d77428
35715 Author: Bdale Garbee <bdale@gag.com>
35716 Date: Tue Jan 18 23:54:36 2011 -0700
35718 we need an install target to prevent parent dir make from failing
35720 commit ca7b549fbf62019b01a6e6c85da50645ea9a4502
35721 Author: Bdale Garbee <bdale@gag.com>
35722 Date: Tue Jan 18 23:48:08 2011 -0700
35724 update changelogs for Debian build
35726 commit 9a5666f42d4d90a0a488fd0a85ae9914944fe0be
35727 Author: Keith Packard <keithp@keithp.com>
35728 Date: Tue Jan 18 22:46:25 2011 -0800
35730 doc: Build with 'make all' from top level. Build with 'make fat'
35732 This will make sure the docs are up-to-date for both regular and
35735 Signed-off-by: Keith Packard <keithp@keithp.com>
35737 commit 72a04d679d06aaad9c2b4297fefd585fc393ce2e
35738 Author: Keith Packard <keithp@keithp.com>
35739 Date: Tue Jan 18 22:39:07 2011 -0800
35741 fat: Add docs to Linux package
35743 Oops. Missed this one.
35745 Signed-off-by: Keith Packard <keithp@keithp.com>
35747 commit 5d91c250179f44ca17c26fff36718b7026aa8ee0
35748 Author: Keith Packard <keithp@keithp.com>
35749 Date: Tue Jan 18 22:34:15 2011 -0800
35751 fat: Add firmware for v1.1 and docs to mac/windows/linux installers
35753 We'll need to be sure to update this each time we add a product.
35755 Signed-off-by: Keith Packard <keithp@keithp.com>
35757 commit 26c4cc3054b1c7c9ed6ce3c2f21f6254b3245718
35758 Author: Bdale Garbee <bdale@gag.com>
35759 Date: Tue Jan 18 23:29:03 2011 -0700
35761 freshen copyright year
35763 commit e2e20f6ce8a9c2bca36fde5730ccd7151377ec6f
35764 Author: Bdale Garbee <bdale@gag.com>
35765 Date: Tue Jan 18 23:18:42 2011 -0700
35767 add 0.9 revision entry, with caveat about telemetry format change
35769 commit 27e6dbbe95ae9b361d60576e0cbadb66792307f3
35770 Author: Keith Packard <keithp@keithp.com>
35771 Date: Tue Jan 18 20:39:58 2011 -0800
35773 doc: Add v0.9 features from altosui to documentation.
35775 New flight download UI and new config items.
35777 Signed-off-by: Keith Packard <keithp@keithp.com>
35779 commit 92d7841edcfc8a841f71f7f97cc541f8e55c4627
35780 Author: Keith Packard <keithp@keithp.com>
35781 Date: Tue Jan 18 20:39:30 2011 -0800
35783 doc: Don't delete telemetrum-outline.pdf
35785 This has a drilling template for the board.
35787 Signed-off-by: Keith Packard <keithp@keithp.com>
35789 commit c411dce69be58238b8312c2fd7405cbe8b5d4a5a
35790 Author: Bdale Garbee <bdale@gag.com>
35791 Date: Tue Jan 18 17:27:11 2011 -0700
35793 update changelogs for Debian build
35795 commit da42f406e88ccc821cd45d5a94d5afec65ec50e9
35796 Merge: ea4cdfb cf550f9
35797 Author: Bdale Garbee <bdale@gag.com>
35798 Date: Mon Jan 17 09:50:17 2011 -0700
35800 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
35802 commit ea4cdfb87e03ecfb974f98305671265b6fb95372
35803 Author: Bdale Garbee <bdale@gag.com>
35804 Date: Mon Jan 17 09:49:45 2011 -0700
35806 update documentation to reflect reality that modifying a board or separate
35807 pyro battery is not as simple as one trace cut on v1.0 and v1.1 boards
35809 commit cf550f9b96fa94d8db559e01df0e265bb1c7b572
35810 Author: Keith Packard <keithp@keithp.com>
35811 Date: Sun Jan 16 23:23:45 2011 -0800
35813 doc: Remove mention of ao_wake_task
35815 This has been removed from the altos sources, so remove it from the
35818 Signed-off-by: Keith Packard <keithp@keithp.com>
35820 commit 4b71c4f4ed6cae23a7f4a2e7ae697da9ec614898
35821 Author: Keith Packard <keithp@keithp.com>
35822 Date: Sat Jan 15 12:26:53 2011 -0800
35824 altos: Use 5V reference data to correct accelerometer measurements.
35826 When the 3.3V and 5V values shift relative to each other (usually due
35827 to changes in power consumption), the measured acceleration will
35828 appear to shift. This patch converts the 3.3V referenced acceleration
35829 value into a 5V referenced acceleration, eliminating this error.
35831 Signed-off-by: Keith Packard <keithp@keithp.com>
35833 commit 2887fe7affc0706dbeb2f04df9a00a9b799903ed
35834 Author: Keith Packard <keithp@keithp.com>
35835 Date: Sat Jan 15 12:25:57 2011 -0800
35837 altos: Optimize fetching of ADC data in flight code
35839 This stores the address of the desired sample in a local variable and
35840 then fetches through that. Saves quite a few instructions.
35842 Signed-off-by: Keith Packard <keithp@keithp.com>
35844 commit 2681a17500913cbaf3966f09380bb1d6b59e3863
35845 Author: Keith Packard <keithp@keithp.com>
35846 Date: Sat Jan 15 12:18:32 2011 -0800
35848 altos: Sample the accelerometer reference voltage on v1.1 boards
35850 This places the 5v reference samples in an array parallel to the basic
35851 ADC values. It doesn't do anything with the values, just stores them.
35853 Signed-off-by: Keith Packard <keithp@keithp.com>
35855 commit 69290588980bb15732a99eca5c911a3b6e9a37b9
35856 Author: Keith Packard <keithp@keithp.com>
35857 Date: Sat Jan 15 12:12:02 2011 -0800
35859 altos: Ensure flight code gets first crack at new ADC data
35861 Instead of having everyone wait on the raw ADC ring, have the flight
35862 code wait on that and have everyone else wait for the flight code to
35863 finish looking at the data and move its pointer forwards.
35865 Signed-off-by: Keith Packard <keithp@keithp.com>
35867 commit 1b8d7313504240ed04e0747e9b0f6e9a83d323e2
35868 Author: Keith Packard <keithp@keithp.com>
35869 Date: Sun Jan 16 15:57:15 2011 -0800
35871 altos: Auto-calibrate linux-based flight testing code
35873 Use the provided ground acceleration average to set the two
35874 accelerometer calibration values so that the flight code will
35875 detect pad/idle mode correctly.
35877 Signed-off-by: Keith Packard <keithp@keithp.com>
35879 commit afd3d3cdb8c2291c1c7cda7908392d68cd04f87f
35880 Author: Mike Beattie <mike@ethernal.org>
35881 Date: Mon Jan 17 15:03:40 2011 +1300
35883 Rework invalid accel cal detection code
35885 Slightly reduces code space.
35887 Uncalibrated accelerometer now enters invalid state as well.
35889 Signed-off-by: Mike Beattie <mike@ethernal.org>
35891 commit 3566dee1cf83870396a0bb164f5549dd3faf58f5
35892 Author: Keith Packard <keithp@keithp.com>
35893 Date: Sun Jan 16 14:40:31 2011 -0800
35895 altosui: Remove spurious colons from eeprom selection headers
35897 This colons make the presentation a bit confusing.
35899 Signed-off-by: Keith Packard <keithp@keithp.com>
35901 commit ab31b1c737d8fd32af482e5b06699f1b832a25a1
35902 Author: Keith Packard <keithp@keithp.com>
35903 Date: Sat Jan 15 00:56:22 2011 -0800
35905 altos: Add DATA_TO_XDATA to linux test harness
35907 The flight test harness needs to expose every function used by the
35908 flight code in some form, and this macro is about to become used.
35910 Signed-off-by: Keith Packard <keithp@keithp.com>
35912 commit add2802a8a33336180fe6856241a7f4a8200e89c
35913 Author: Mike Beattie <mike@ethernal.org>
35914 Date: Sun Jan 16 00:10:30 2011 +1300
35916 altos: Added check for out of bounds accel
35918 Chose invalid flight mode instead of idle to give user feedback.
35920 Signed-off-by: Mike Beattie <mike@ethernal.org>
35922 commit 58838c0b96a91da0bd0cd77c3ff312b589c08136
35923 Author: Mike Beattie <mike@ethernal.org>
35924 Date: Sat Jan 15 23:21:26 2011 +1300
35926 altos: Added check for an accel value above 1.5g
35928 When detecting flight or idle mode, this should indicate
35929 that accel cal values are out of whack.
35931 Signed-off-by: Mike Beattie <mike@ethernal.org>
35933 commit 118fe84c9ff1cc9d1653e67a2315e22e19d60a14
35934 Author: Keith Packard <keithp@keithp.com>
35935 Date: Sat Jan 15 11:26:31 2011 -0800
35937 altos: average 512 accel/baro samples at startup instead of 1000
35939 This lets us use a simple shift instead of a divide, saving a huge
35940 amount of code space.
35942 Signed-off-by: Keith Packard <keithp@keithp.com>
35944 commit 8a775b8f9ecefa143050653d74dfd218b32b9bb5
35945 Author: Anthony Towns <aj@erisian.com.au>
35946 Date: Sun Jan 16 10:54:45 2011 +1000
35948 altos: Restructure skytraq NMEA parsing code to save some space
35950 Splitting this into several smaller functions appears to make SDCC
35951 generate better code.
35953 commit 7a35b2d7048669a96256d4ea0086299f8a0cb1df
35954 Author: Keith Packard <keithp@keithp.com>
35955 Date: Sat Jan 15 22:42:38 2011 -0800
35957 altos: Flush log when full
35959 When the log storage is full, make sure any pending writes are flushed
35960 out so that the last bit isn't lost.
35962 Signed-off-by: Keith Packard <keithp@keithp.com>
35964 commit 47ee4597e55749e8f66f61a585ea32776979bf80
35965 Author: Keith Packard <keithp@keithp.com>
35966 Date: Sat Jan 15 16:25:10 2011 -0800
35968 altos: TELEMETRY PROTOCOL CHANGE. Switch to 16-bit serial numbers.
35970 What a terrible mistake! The flight computer serial numbers were
35971 recorded in only 8 bits, so serial numbers > 255 would get truncated.
35973 There's really no fix other than bumping the field to 16 bits and
35974 reflashing every TM and TD on the planet. Very unfortunate.
35976 Signed-off-by: Keith Packard <keithp@keithp.com>
35978 commit b22ba359a02297e39a446cbd5ef51e63b795624a
35979 Author: Keith Packard <keithp@keithp.com>
35980 Date: Sat Jan 15 12:05:50 2011 -0800
35982 doc: inkscape tracks the filename inside the document
35984 telemetrum-outline.svg was renamed from telemetrum.svg and inkscape
35987 Signed-off-by: Keith Packard <keithp@keithp.com>
35989 commit d0a841b285fb398f0be72183ec3c9d1e358419a9
35990 Author: Keith Packard <keithp@keithp.com>
35991 Date: Sat Jan 15 12:02:43 2011 -0800
35993 altosui: Require 4 sats to light up the 'GPS locked' light.
35995 This tracks the same GPS signal requirement needed for 'GPS ready' and
35996 ensures that we have a 3d fix.
35998 Signed-off-by: Keith Packard <keithp@keithp.com>
36000 commit 1bfdce6fc3367fdf03e0dc7ddd94da18723b8ba3
36001 Author: Keith Packard <keithp@keithp.com>
36002 Date: Sun Jan 16 14:30:38 2011 -0800
36004 altosui: Ensure serial device is closed after eeprom download finishes
36006 As this code is all event-driven, track which events will trigger
36007 further work and block closing the device in those specific cases,
36008 ensuring that all other code paths end up closing the device.
36010 Signed-off-by: Keith Packard <keithp@keithp.com>
36012 commit 987039b8f0b1d889aca9109d4c6a83f034ff64a7
36013 Author: Keith Packard <keithp@keithp.com>
36014 Date: Sun Jan 16 14:29:57 2011 -0800
36016 altosui: Remove debug message when eeprom downloads are complete.
36018 This message isn't useful now that this code appears to work.
36020 Signed-off-by: Keith Packard <keithp@keithp.com>
36022 commit fb534aae15f0f1e5d69790e159d0287b6b8a514a
36023 Author: Keith Packard <keithp@keithp.com>
36024 Date: Sun Jan 16 14:28:35 2011 -0800
36026 altosui: Use long input flush timeout when remote.
36028 100ms isn't long enough to capture pending remote serial input, so use
36029 300 ms in that mode.
36031 Signed-off-by: Keith Packard <keithp@keithp.com>
36033 commit d4add23186b3586c99579d83efdc003f79e9bf7a
36034 Author: Keith Packard <keithp@keithp.com>
36035 Date: Sun Jan 16 14:26:18 2011 -0800
36037 altosui: Make serial debug more complete and accurate
36039 Display all serial input, including telemetry.
36040 Wait to display serial output until flush time, to debug missing flushing.
36041 Show when devices are opened and closed.
36043 Signed-off-by: Keith Packard <keithp@keithp.com>
36045 commit deb3c7b9206be0c9c46f75d35c8f766c26d9838f
36046 Author: Keith Packard <keithp@keithp.com>
36047 Date: Sat Jan 15 22:43:37 2011 -0800
36049 altosui: Reset eeprom download instance variables before reading flight
36051 To deal with downloading multiple flights in a single invocation, make
36052 sure all relevant instance variables are set back to start of flight
36053 download values each time a log is read.
36055 Signed-off-by: Keith Packard <keithp@keithp.com>
36057 commit eec9eb2e81535e62c52fbb2e57a2d33f88f92c1a
36058 Author: Mike Beattie <mike@ethernal.org>
36059 Date: Mon Jan 17 07:56:53 2011 +1300
36061 Close serial port if Download/Delete dialog is cancelled.
36063 Signed-off-by: Mike Beattie <mike@ethernal.org>
36065 commit df1c6ab3ac079199b5a12328c9ff5cfa6ac29b36
36066 Author: Mike Beattie <mike@ethernal.org>
36067 Date: Mon Jan 17 00:40:07 2011 +1300
36069 Convert EepromSelect dialog to use a GridBag
36071 Signed-off-by: Mike Beattie <mike@ethernal.org>
36073 commit fef302656f21ae0ab4772f72979cbb7f071da89a
36074 Author: Mike Beattie <mike@ethernal.org>
36075 Date: Sun Jan 16 20:25:19 2011 +1300
36077 Re-order and re-arrange eeprom download dialog
36079 Signed-off-by: Mike Beattie <mike@ethernal.org>
36081 commit 35adb7c98fe02e84fff70c1bee22bfa019cfacc2
36082 Author: Keith Packard <keithp@keithp.com>
36083 Date: Fri Jan 14 21:44:59 2011 -0800
36085 doc: Add telemetrum mounting template in svg and pdf forms
36087 telemetrum-outline.svg and telemetrum-outline.pdf
36089 Signed-off-by: Keith Packard <keithp@keithp.com>
36091 commit fdba0f24afd59becc499d750bbdb80aea86066ac
36092 Author: Bdale Garbee <bdale@gag.com>
36093 Date: Fri Jan 14 18:01:16 2011 -0700
36095 update changelogs for Debian build
36097 commit 646e1926cdf56e2cf2425413ce716e6999b64a58
36098 Author: Bdale Garbee <bdale@gag.com>
36099 Date: Fri Jan 14 18:01:00 2011 -0700
36101 update changelogs for Debian build
36103 commit d908c2ebd0b11a54cfd922a192249d0f0df0ddb0
36104 Author: Keith Packard <keithp@keithp.com>
36105 Date: Fri Jan 14 16:47:36 2011 -0800
36107 altosui: Add preference for serial debugging.
36109 This dumps serial input/output to stdout.
36111 Signed-off-by: Keith Packard <keithp@keithp.com>
36113 commit fcaee12a64d5e195b55b8f77c19dfc0c57ef5d58
36114 Author: Keith Packard <keithp@keithp.com>
36115 Date: Fri Jan 14 16:47:19 2011 -0800
36117 altosui: Ensure serial line is flushed after disabling remote link
36119 Flush the '~' character.
36121 Signed-off-by: Keith Packard <keithp@keithp.com>
36123 commit 2d154be89246e111a36f7c2700effbb2c97da541
36124 Author: Keith Packard <keithp@keithp.com>
36125 Date: Fri Jan 14 16:44:50 2011 -0800
36127 altosui: Show dialog after successful delete or when no flights
36129 Make sure the user always sees confirmation for flight log management.
36131 Signed-off-by: Keith Packard <keithp@keithp.com>
36133 commit b490455807d1c70c81785ed8931a07ab44e8e421
36134 Author: Bdale Garbee <bdale@gag.com>
36135 Date: Fri Jan 14 14:31:19 2011 -0700
36137 update changelogs for Debian build
36139 commit 97b1ca994599ad262400eb3c685799582f7f1b94
36140 Author: Bdale Garbee <bdale@gag.com>
36141 Date: Fri Jan 14 14:30:49 2011 -0700
36143 update changelogs for Debian build
36145 commit d794ef9e0fbe4d13259db1bbd69f01717c14400b
36146 Author: Keith Packard <keithp@keithp.com>
36147 Date: Wed Jan 12 12:41:26 2011 -0800
36149 altos: check for valid flight number in ao_log_delete
36151 Zero is not a valid flight number, and ao_log_flight uses that to
36152 indicate 'no flight in this slot'. Check the user-provided input for
36153 zero before looking through the slots.
36155 Signed-off-by: Keith Packard <keithp@keithp.com>
36157 commit 8801b8c1947bd39f7c985b91a2ba8dbc81bcc91a
36158 Author: Keith Packard <keithp@keithp.com>
36159 Date: Wed Jan 12 12:40:45 2011 -0800
36161 altosui: Add eeprom 'manage' ui to download and delete multiple flights
36163 This shows the list of available flights and provides options to
36164 download and/or delete each one.
36166 Signed-off-by: Keith Packard <keithp@keithp.com>
36168 commit 440d52e34364fdeeddc76a2d744cc6d1c934364f
36169 Author: Keith Packard <keithp@keithp.com>
36170 Date: Tue Jan 11 21:28:07 2011 -0800
36172 altosui: Add support for parsing list of flights from the 'l' command
36174 This adds parsing support to enumerate the available flights, but does
36175 not yet provide any UI to use it.
36177 Signed-off-by: Keith Packard <keithp@keithp.com>
36179 commit 7ad419d81c90ef6a16656970466313767fef830f
36180 Author: Keith Packard <keithp@keithp.com>
36181 Date: Tue Jan 11 21:26:41 2011 -0800
36183 altos: oops -- 'e' command was only showing 7 of the 8 bytes per line
36185 Just a silly off-by-one error when printing out the data received from flash.
36187 Signed-off-by: Keith Packard <keithp@keithp.com>
36189 commit bd2480fd757b67557d9c7de42e402034002c3e37
36190 Author: Keith Packard <keithp@keithp.com>
36191 Date: Tue Jan 11 15:39:24 2011 -0800
36193 altosui: Split eeprom download code apart
36195 Create separate 'download config data', 'read single record' and 'read
36196 block' functions. This code will be shared with future multi-log
36197 reading code for new firmware.
36199 Signed-off-by: Keith Packard <keithp@keithp.com>
36201 commit c437b14b7fc7afdfc7b809a04d7fa29d5e742307
36202 Author: Anthony Towns <aj@erisian.com.au>
36203 Date: Fri Jan 7 21:00:10 2011 -0800
36205 altos: Remove redundant initialization of ao_interval variables
36207 These are all initialized in the ao_flight_drogue state transition.
36209 Signed-off-by: Keith Packard <keithp@keithp.com>
36211 commit 57de960b8148bf485607898c3d66af6994d76481
36212 Author: Anthony Towns <aj@erisian.com.au>
36213 Date: Fri Jan 7 20:52:33 2011 -0800
36215 altos: Remove unused accel_vel_mach and accel_vel_boost variables
36217 Presumably left-over debugging code.
36219 Signed-off-by: Keith Packard <keithp@keithp.com>
36221 commit ca66f86a899c191b6362a334417fc84a79349677
36222 Author: Keith Packard <keithp@keithp.com>
36223 Date: Fri Jan 7 20:46:29 2011 -0800
36225 altosui: Add configuration of flight log size
36227 This adds to the TeleMetrum configuration UI the ability to set the
36228 maximum flight log size.
36230 Signed-off-by: Keith Packard <keithp@keithp.com>
36232 commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a
36233 Author: Keith Packard <keithp@keithp.com>
36234 Date: Fri Jan 7 20:26:39 2011 -0800
36236 altos: Check for full log and complain
36238 Reports special tone along with the continuity checks.
36239 Reports flight 0 in telemetry.
36241 Signed-off-by: Keith Packard <keithp@keithp.com>
36243 commit 00891b40754962ef6530b237ef52017bb58112d5
36244 Author: Keith Packard <keithp@keithp.com>
36245 Date: Fri Jan 7 20:25:09 2011 -0800
36247 altos: Check requested log max size against available space
36249 Make sure the amount of memory requested for a single log isn't more
36250 than is available on the device.
36252 Signed-off-by: Keith Packard <keithp@keithp.com>
36254 commit bbddcae2a15b6d430e84956ddf26955aa9173cc0
36255 Author: Anthony Towns <aj@erisian.com.au>
36256 Date: Fri Jan 7 20:18:25 2011 -0800
36258 altos: Optimize Morse code generation
36260 This reduces the size of data and code needed to report the
36263 Signed-off-by: Keith Packard <keithp@keithp.com>
36265 commit 73620c41017c1774d6190dfd4be5b742eb64f8d3
36266 Author: Keith Packard <keithp@keithp.com>
36267 Date: Fri Jan 7 20:13:28 2011 -0800
36269 altos: ensure erase mark is written when erasing flights
36271 It was getting called only when *failing* to erase a flight (oops),
36272 secondly, it wasn't getting written because ao_storage_flush wasn't
36275 Signed-off-by: Keith Packard <keithp@keithp.com>
36277 commit edd22ee49adf60c35f2fe6ba97c111b7ad4131c2
36278 Author: Keith Packard <keithp@keithp.com>
36279 Date: Fri Jan 7 17:56:06 2011 -0800
36281 altos: report flight log offsets in hex block numbers instead of bytes
36283 makes them compatible with the 'e' command.
36285 Signed-off-by: Keith Packard <keithp@keithp.com>
36287 commit 1cc08af4f4a1ff61fc0deca3bdd95e8a5ca8ec5c
36288 Author: Keith Packard <keithp@keithp.com>
36289 Date: Fri Jan 7 17:55:54 2011 -0800
36291 altos: white space fix
36293 Signed-off-by: Keith Packard <keithp@keithp.com>
36295 commit d8c9684239b67a69a4a3d24202a6df0d73c4f7f5
36296 Author: Keith Packard <keithp@keithp.com>
36297 Date: Fri Jan 7 17:54:54 2011 -0800
36299 altos: Speed up at45 and 25lc erase speeds
36301 No need to read the block to be erased before erasing it.
36303 Signed-off-by: Keith Packard <keithp@keithp.com>
36305 commit 2722703bd848b07a02d3ce0c83a502eca52a9f1d
36306 Author: Keith Packard <keithp@keithp.com>
36307 Date: Fri Jan 7 14:58:39 2011 -0800
36309 altos: support storage of multiple flights.
36311 This adds the logging support for dealing with multiple flights
36313 Signed-off-by: Keith Packard <keithp@keithp.com>
36315 commit a9b210bc33cd95e7108ab51925fdf0d5e8deaf7e
36316 Author: Keith Packard <keithp@keithp.com>
36317 Date: Fri Jan 7 10:05:11 2011 -0800
36319 altos: Add configuration parameter for maximum flight log size
36321 This parameter will permit available storage to be split into multiple
36322 separate flight logs.
36324 Signed-off-by: Keith Packard <keithp@keithp.com>
36326 commit 3bcf14f12f6681888c3162d0f33ef2d454eb75dd
36327 Author: Bdale Garbee <bdale@gag.com>
36328 Date: Fri Jan 7 00:52:50 2011 -0700
36330 update changelogs for Debian build
36332 commit 408a3e04362d626778640dd0ce7d356d3863de53
36333 Author: Keith Packard <keithp@keithp.com>
36334 Date: Thu Jan 6 23:38:13 2011 -0800
36336 altos: Mark end of available flight list with 'done' to make the UI
36337 code easier to write
36339 Signed-off-by: Keith Packard <keithp@keithp.com>
36341 commit e991f52276248fa08d96fbecc458bc478e98d299
36342 Author: Keith Packard <keithp@keithp.com>
36343 Date: Thu Jan 6 23:35:31 2011 -0800
36345 altos: Rip out 'optimization' in ao_log_scan
36347 Remove premature optimization to avoid re-scanning the flight logs for
36348 the best empty entry.
36350 Signed-off-by: Keith Packard <keithp@keithp.com>
36352 commit 569a1dac55b70c30f01afa7bcb74442ecdd85d85
36353 Author: Keith Packard <keithp@keithp.com>
36354 Date: Thu Jan 6 22:37:38 2011 -0800
36356 altos: Move common storage code to ao_storage.c. Add M25P80 driver
36358 This reworks the storage API so that you erase blocks and then store
36359 data to them so that the M25P80 driver will work.
36361 Signed-off-by: Keith Packard <keithp@keithp.com>
36363 commit e4ba9bf4291bf17c777c8c3ef7c71e4a30b9947a
36364 Author: Keith Packard <keithp@keithp.com>
36365 Date: Thu Jan 6 17:34:58 2011 -0800
36367 altos: Require manual flight erasing.
36369 This supports flash chips that require larger erase blocks.
36371 Signed-off-by: Keith Packard <keithp@keithp.com>
36373 commit ddcc94da4326f9ce954bd31a46b36165c58e6c18
36374 Author: Keith Packard <keithp@keithp.com>
36375 Date: Thu Jan 6 12:51:39 2011 -0800
36377 altos: Simplify storage API
36379 This removes the config-specific APIs and exposes global variables for
36380 the available storage space, block size and config storage location.
36382 Signed-off-by: Keith Packard <keithp@keithp.com>
36384 commit f3f1b1488bdc92fa9277dc549ba9f3210a8d4c8c
36385 Author: Keith Packard <keithp@keithp.com>
36386 Date: Thu Jan 6 11:28:35 2011 -0800
36388 altos: packet and usb i/o routines use 'char', not 'uint8_t'
36390 Just fixing the type of a local variable holding a character
36391 passed from the packet link to usb.
36393 Signed-off-by: Keith Packard <keithp@keithp.com>
36395 commit 5688af4e4d7ca8e559d758257e79b7979f1cc924
36396 Author: Keith Packard <keithp@keithp.com>
36397 Date: Wed Dec 22 21:13:56 2010 -0800
36399 altos: Add telemetrum-v1.1 directory
36401 This just clones the v1.0 build; changes will be added on top of this.
36403 Signed-off-by: Keith Packard <keithp@keithp.com>
36405 commit 9f7296b3feab872bf51fc369ade69cc1e7cf7a3f
36406 Author: Keith Packard <keithp@keithp.com>
36407 Date: Wed Dec 22 21:06:22 2010 -0800
36409 altos: Split out SPI driver.
36411 For TM with the companion connector, the SPI bus will be shared among
36412 multiple devices. Split out the existing SPI code into a common
36413 driver, with the SPI bus protected by a mutex.
36415 Signed-off-by: Keith Packard <keithp@keithp.com>
36417 commit 51c410c1c952e0e9bcf1b2c438813de63753be5f
36418 Author: Keith Packard <keithp@keithp.com>
36419 Date: Sun Nov 28 00:24:54 2010 -0800
36421 windows: Update NSIS installer file to use compatibility IDs
36423 This allows the file to contain a single InitDriverSetup function,
36424 making things shorter and (I hope) clearer.
36426 commit 4a42f9d5c20dcaf5fd7591ccf9e32c6130d9d538
36427 Author: Keith Packard <keithp@keithp.com>
36428 Date: Sun Nov 28 00:22:14 2010 -0800
36430 windows: Add compatibility IDs to telemetrum.inf
36432 This will allow the .nsi file to reference just the compatibility ID
36433 instead of needing to have all of the USB IDs listed.
36435 Signed-off-by: Keith Packard <keithp@keithp.com>
36437 commit 484b44e81b655f1ecb48256095382a56d2839bae
36438 Author: Keith Packard <keithp@keithp.com>
36439 Date: Fri Nov 26 17:39:40 2010 -0800
36441 altos: eliminate ao_wake_task
36443 Waking up a task waiting on some random object is a bad idea. Fix
36444 the waiters to look for suitable signalling.
36446 Signed-off-by: Keith Packard <keithp@keithp.com>
36448 commit 07213dc34fa20470a4b36a327a83d75b0f010ebb
36449 Author: Keith Packard <keithp@keithp.com>
36450 Date: Fri Nov 26 16:14:15 2010 -0800
36452 altos: clean up radio abort paths. Share radio code.
36454 Instead of aborting the DMA and radio operation and expecting that to
36455 be handled reasonably by the radio receiving task, rewrite things so
36456 that the abort function just wakes the receiving task while that
36457 terminates the DMA and cleans up the radio.
36459 This eliminates all kinds of nasty bugs dealing with radio abort
36460 smashing the radio registers at the wrong time, or interrupting a
36461 radio transmission.
36463 Signed-off-by: Keith Packard <keithp@keithp.com>
36465 commit b62580855c5144f5bc7e0172289bce08814d9472
36466 Author: Anthony Towns <aj@erisian.com.au>
36467 Date: Tue Dec 14 03:40:18 2010 +1000
36469 altosui: move maps to subdir, fix E/W mismatch
36471 commit b8d2eb5509096fd5bd04598b1312077659109620
36472 Author: Bdale Garbee <bdale@gag.com>
36473 Date: Wed Dec 1 00:15:17 2010 -0700
36475 update changelogs for Debian build
36477 commit ea95c060f8bd959cefc60dd6d411151f3c91384e
36478 Author: Bdale Garbee <bdale@gag.com>
36479 Date: Wed Dec 1 00:12:05 2010 -0700
36481 fix symlink paths in rules file
36483 commit f95220b6f0cc74928e0e7d7c7e1f443eafc32a02
36484 Author: Bdale Garbee <bdale@gag.com>
36485 Date: Wed Dec 1 00:03:23 2010 -0700
36487 update changelogs for Debian build
36489 commit ea7130e953622884afc348265f5a4c58f9876823
36490 Author: Bdale Garbee <bdale@gag.com>
36491 Date: Wed Dec 1 00:00:58 2010 -0700
36493 modify Debian package build to deliver one copy of background.png for
36494 the themes and symlink it into place for gdm and slim
36496 commit 3696b30a8d1eb351353d84b5f7af8eeff55c468b
36497 Author: Bdale Garbee <bdale@gag.com>
36498 Date: Mon Nov 29 21:47:13 2010 -0700
36500 update changelogs for Debian build
36502 commit 11b3f9ff715017a2dec02003275885334f22c009
36503 Author: Bdale Garbee <bdale@gag.com>
36504 Date: Mon Nov 29 21:46:02 2010 -0700
36508 commit 5f3f11e11dff9b9f4d1dde279c0d474de0de12a5
36509 Author: Keith Packard <keithp@keithp.com>
36510 Date: Mon Nov 29 20:41:49 2010 -0800
36512 Add minimal release testing plan to Releasing
36514 Signed-off-by: Keith Packard <keithp@keithp.com>
36516 commit f0a4deee23984a8f779917bbeaf74a66a0abf592
36517 Author: Keith Packard <keithp@keithp.com>
36518 Date: Mon Nov 29 20:34:27 2010 -0800
36520 Move "Releasing" to top level
36522 This file documents the AltOS release process for all systems.
36524 Signed-off-by: Keith Packard <keithp@keithp.com>
36526 commit b727156ef0a7fb6e442ca28be27eb344a213ecf8
36527 Author: Keith Packard <keithp@keithp.com>
36528 Date: Mon Nov 29 20:17:35 2010 -0800
36530 windows: Add jfreechart.jar and jcommon.jar to windows install image
36532 These are necessary for the Graph Data button to do anything useful.
36534 Signed-off-by: Keith Packard <keithp@keithp.com>
36536 commit 3e2220a180f95971d222a597d2057ca328c27356
36537 Author: Bdale Garbee <bdale@gag.com>
36538 Date: Mon Nov 29 21:29:14 2010 -0700
36540 adding Bdale's release process document to the source tree
36542 commit 61a924099800494b589cbbb87c65b552ccbd8394
36543 Author: Bdale Garbee <bdale@gag.com>
36544 Date: Mon Nov 29 14:40:27 2010 -0700
36546 fix an Altos vs Altus typo in the docs
36548 commit e840b6594b8a939f148fa7231e1b06a280d94074
36549 Author: Bdale Garbee <bdale@gag.com>
36550 Date: Sun Nov 28 22:42:43 2010 -0700
36552 fix section layering
36554 commit f39698bbc12afdfadfac56c90030e16db93cf4fc
36555 Author: Bdale Garbee <bdale@gag.com>
36556 Date: Sun Nov 28 19:46:03 2010 -0700
36558 fix publish target in doc/Makefile
36560 commit 13cea7a96821165a10a8b2433af1da7508882b0a
36561 Author: Bdale Garbee <bdale@gag.com>
36562 Date: Sun Nov 28 18:48:31 2010 -0700
36564 moved doc dir in web content to AltOS tree
36566 commit 6f3c72462af86a7d9dec20f4c813a524a5be9fbb
36567 Author: Bdale Garbee <bdale@gag.com>
36568 Date: Sun Nov 28 18:32:17 2010 -0700
36570 update changelogs for Debian build
36572 commit a375942979dbcd8239d8c0addb10616e6048f6ea
36573 Author: Bdale Garbee <bdale@gag.com>
36574 Date: Sun Nov 28 18:31:26 2010 -0700
36576 rewind changelog to recover from stupid build failure
36578 commit 263cf6c4fc5c1a240d719bb0ceb33393864fb3d6
36579 Author: Bdale Garbee <bdale@gag.com>
36580 Date: Sun Nov 28 18:24:00 2010 -0700
36582 update changelogs for Debian build
36584 commit 2615289265b6f8fa08827be794b4eee569fc6333
36585 Author: Bdale Garbee <bdale@gag.com>
36586 Date: Sun Nov 28 18:23:17 2010 -0700
36588 update changelogs for Debian build
36590 commit 5e23bcc2d2ad33a839fedd2158213098a05cd9ae
36591 Author: Bdale Garbee <bdale@gag.com>
36592 Date: Sun Nov 28 18:21:31 2010 -0700
36594 declaring 0.8 released
36596 commit b09d3e11c32abd07f8e11b483ac4b57148f4f2d8
36597 Author: Keith Packard <keithp@keithp.com>
36598 Date: Sat Nov 27 23:08:41 2010 -0800
36600 windows: Bump .inf file version
36602 commit 42c2394ccc1a1ee6dc134ed963a4f79acf031d0b
36603 Author: Keith Packard <keithp@keithp.com>
36604 Date: Sat Nov 27 23:04:50 2010 -0800
36606 windows: more .inf file hacking
36608 Add a LayoutFile reference
36609 Add the FakeModemCopyFileSection
36611 Copy AltosMetrum.Install section to AltusMetrum.Install.NT section. I
36612 don't know what this might do; existing files seem inconsistent.
36614 Signed-off-by: Keith Packard <keithp@keithp.com>
36616 commit 26369a92398f4ebe3fcd54ce34cebffae0cfdf07
36617 Author: Keith Packard <keithp@keithp.com>
36618 Date: Sat Nov 27 22:39:31 2010 -0800
36620 windows: remove some non-existent .inf file section references
36622 The mfglt and VerboseResultCodes sections are not present in the .inf
36623 file, so remove refernces to them.
36625 Signed-off-by: Keith Packard <keithp@keithp.com>
36627 commit 641c5373724d34c3adfcf42420a528d6bba736b9
36628 Author: Keith Packard <keithp@keithp.com>
36629 Date: Sat Nov 27 22:35:18 2010 -0800
36631 windows: try harder to get windows install to work
36633 Add devIDs to .nsi file. Fix install section name mapping from the
36636 Signed-off-by: Keith Packard <keithp@keithp.com>
36638 commit cd414e2c04ce5ecbc75f19325a6d6f82cd489fb3
36639 Author: Keith Packard <keithp@keithp.com>
36640 Date: Sat Nov 27 16:30:29 2010 -0800
36642 altosui: Correct windows hardware IDs for nsis installer file
36644 Need real hardware IDs (encoded USB ids) to get windows to
36645 auto-install the driver?
36647 Signed-off-by: Keith Packard <keithp@keithp.com>
36649 commit f834b22905db87557f729f942607dc363b013694
36650 Author: Bdale Garbee <bdale@gag.com>
36651 Date: Thu Nov 25 22:31:33 2010 -0700
36653 update changelogs for Debian build
36655 commit da3b39d6b1b5ba48686c2a4add4b5448fd5711af
36656 Author: Bdale Garbee <bdale@gag.com>
36657 Date: Thu Nov 25 22:29:01 2010 -0700
36659 changed main document name from telemetrum-doc to altusmetrum
36661 commit ab6c9c983a2830bc8807e1b75d2576141b73632d
36662 Author: Bdale Garbee <bdale@gag.com>
36663 Date: Thu Nov 25 19:30:02 2010 -0700
36665 update fat target in Makefiles to reflect move of altosui and libaltos
36667 commit b8f05cdc0e9b4a96852eed9d38ff6d5950e2d2ed
36668 Author: Keith Packard <keithp@keithp.com>
36669 Date: Thu Nov 25 17:29:28 2010 -0800
36671 altosui: Clean up flash code to ensure swing gets called from right thread
36673 This moves all of the flash code to a separate thread and passes
36674 messages back to the swing thread to keep the UI up to date.
36676 Signed-off-by: Keith Packard <keithp@keithp.com>
36678 commit adbb14c63d85b7a54223f88ac623571456f4a462
36679 Author: Keith Packard <keithp@keithp.com>
36680 Date: Thu Nov 25 16:28:04 2010 -0800
36682 altosui: Remove gratuitous threading from device flashing UI
36684 There's no need for a thread here, and swing doesn't want us to use
36687 Signed-off-by: Keith Packard <keithp@keithp.com>
36689 commit 7f88520089660845009148b69bfcea6c9dff9672
36690 Author: Keith Packard <keithp@keithp.com>
36691 Date: Thu Nov 25 16:23:18 2010 -0800
36693 altosui: Flight data download GUI operations called only from main thread
36695 Swing doesn't like UI functions being called from non-dispatch thread,
36696 so fix up the eeprom download code to use SwingUtilities.invokeLater
36697 to make sure this works right.
36699 Signed-off-by: Keith Packard <keithp@keithp.com>
36701 commit 6d3612e267cd4c1e7fdd74fc33952b3f26f870f5
36702 Author: Keith Packard <keithp@keithp.com>
36703 Date: Thu Nov 25 16:09:37 2010 -0800
36705 altosui: Eliminate unnecessary thread from config UI
36707 There's no reason to use a thread to run a dialog box, and
36708 swing doesn't like threads anyways.
36710 Signed-off-by: Keith Packard <keithp@keithp.com>
36712 commit 12fb7f0e70cd244475d84469f93283112478d1e1
36713 Author: Keith Packard <keithp@keithp.com>
36714 Date: Thu Nov 25 15:56:42 2010 -0800
36716 altosui: Only call swing display functions from main thread.
36718 Swing insists that all display functions be called from a single
36719 thread, and the flight window wasn't following this for display
36720 updates. Use SwingUtilities.invokeLater to make sure the flight UI
36721 updates happen in the right context.
36723 Fixes a UI freeze on Mac OS.
36725 Signed-off-by: Keith Packard <keithp@keithp.com>
36727 commit b74cec6cd0bc043f53e9e28472765aa343136813
36728 Author: Bob Finch <w9ya@qrparci.net>
36729 Date: Thu Nov 25 13:30:48 2010 -0700
36731 Updated AltOS PKGBUILD to track makefile changes
36733 commit f88bde21d76a4ff91099a5051153ebace1619978
36734 Author: Keith Packard <keithp@keithp.com>
36735 Date: Thu Nov 25 11:16:55 2010 -0800
36737 altosui: Hack up standalone makefile to maybe build altosui again
36739 This isn't tested, but at least the paths are more likely to be correct
36741 Signed-off-by: Keith Packard <keithp@keithp.com>
36743 commit 3d98440d53378aaa6da87ed65e9abb2f96f7ee49
36744 Author: Keith Packard <keithp@keithp.com>
36745 Date: Thu Nov 25 11:16:28 2010 -0800
36747 altosui: Make windows bits build after moving altosui directory
36749 Signed-off-by: Keith Packard <keithp@keithp.com>
36751 commit 4893ed50bc14772986ac02f9b39928f1882da923
36752 Author: Keith Packard <keithp@keithp.com>
36753 Date: Wed Nov 24 23:54:08 2010 -0800
36755 Revert "altos: Don't abort radio transmissions with ao_radio_abort"
36757 This reverts commit 54468e5dc567aaac5c5c20e921859b7cec28bb88.
36759 With this patch in place, TD could not be placed in 'packet' mode.
36761 commit cb08bc264c71ca972027392b42f347a03df76a43
36762 Author: Keith Packard <keithp@keithp.com>
36763 Date: Wed Nov 24 22:55:08 2010 -0800
36765 doc: Rename telemetrum-doc as altusmetrum
36767 Signed-off-by: Keith Packard <keithp@keithp.com>
36769 commit 554bdd25e132dbaec322bc11f94093d2c2e78751
36770 Author: Keith Packard <keithp@keithp.com>
36771 Date: Wed Nov 24 22:49:33 2010 -0800
36773 doc: Add more authors, fix URL formatting, note that AltosUI actually exists
36775 Add aj and bfinch as authors. Insert an acknowledgements section. Fill
36776 in the Fire Igniter section in the AltosUI chapter. Then change the
36777 section talking about the future plans for Java to mention that they
36778 actually exist now.
36780 Signed-off-by: Keith Packard <keithp@keithp.com>
36782 commit bcf78b67717374b5971820021b83061e2e9734cf
36783 Author: Keith Packard <keithp@keithp.com>
36784 Date: Wed Nov 24 21:39:18 2010 -0800
36786 doc: Reformat altos to use sections for each function
36788 This places them in the TOC, making them easier to find.
36790 Signed-off-by: Keith Packard <keithp@keithp.com>
36792 commit 51c7741040d95c5deece939dae5e4136cc04afc4
36793 Merge: d1dbe3b 4e47c44
36794 Author: Keith Packard <keithp@keithp.com>
36795 Date: Wed Nov 24 21:00:52 2010 -0800
36797 Merge branch 'buttonbox'
36800 doc/telemetrum-doc.xsl
36802 Pull the buttbox version of the docs in as it had been updated.
36804 Signed-off-by: Keith Packard <keithp@keithp.com>
36806 commit 4e47c44d335276cf0dc5ed3a0756e50c98c1b9b9
36807 Author: Bdale Garbee <bdale@gag.com>
36808 Date: Wed Nov 24 21:44:53 2010 -0700
36810 manually fold in documentation work from the master branch
36812 commit 8a68c1da253c0b29a7cb9c7540c20585ad6e3dec
36813 Author: Bdale Garbee <bdale@gag.com>
36814 Date: Wed Nov 24 21:21:53 2010 -0700
36818 commit 7cd1c7765d137df711caeeb69abaaba1b36e0a65
36819 Author: Bdale Garbee <bdale@gag.com>
36820 Date: Wed Nov 24 20:53:36 2010 -0700
36822 fix missing section close in Site Map content
36824 commit db2b19b8f0d452d682d53c7ed0ff6e359b46efa0
36825 Merge: b372f3c 915f881
36826 Author: Keith Packard <keithp@keithp.com>
36827 Date: Wed Nov 24 18:57:35 2010 -0800
36829 Merge remote branch 'aj/buttonbox' into buttonbox
36831 commit b372f3c0ee4ec49aabe61c169cb1eb9bb4fb2cfc
36832 Author: Keith Packard <keithp@keithp.com>
36833 Date: Wed Nov 24 18:50:46 2010 -0800
36835 Missing change to top level Makefile to build altosui
36837 Signed-off-by: Keith Packard <keithp@keithp.com>
36839 commit 915f881d61294dc6f5a6a3e8d75567e18492a631
36840 Author: Anthony Towns <aj@erisian.com.au>
36841 Date: Thu Nov 25 09:52:30 2010 +1000
36843 doc: Document altosui "Site Map" tab
36845 commit f01096c4b42f9a4720ed0414826c2a283a992545
36846 Merge: 357826a 3fbefb3
36847 Author: Anthony Towns <aj@erisian.com.au>
36848 Date: Thu Nov 25 09:10:50 2010 +1000
36850 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
36852 commit 3fbefb3eea981d34a09496cf8abf0119de2e35bf
36853 Author: Keith Packard <keithp@keithp.com>
36854 Date: Wed Nov 24 14:57:57 2010 -0800
36856 Move altosui to the top level, placing libaltos inside it.
36858 Signed-off-by: Keith Packard <keithp@keithp.com>
36860 commit 357826aa9c7b42c59f5d52b8eb016d73b6da0c7f
36861 Author: Anthony Towns <aj@erisian.com.au>
36862 Date: Thu Nov 25 09:07:34 2010 +1000
36864 docs: Document altosui "Graph Data" button
36866 commit 7811e6dfa6caf10251da7df7c24b98cdc3787892
36867 Merge: 71b1949 7a50837
36868 Author: Anthony Towns <aj@erisian.com.au>
36869 Date: Thu Nov 25 08:47:36 2010 +1000
36871 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
36873 commit 7a50837ea0d92db3f469f197ec8210aee22aa143
36874 Author: Keith Packard <keithp@keithp.com>
36875 Date: Wed Nov 24 10:55:18 2010 -0800
36877 altosui: Make sure packet mode is turned off when the connection fails
36879 When the packet connection times out, turn packet mode off when
36880 closing the serial port.
36882 Signed-off-by: Keith Packard <keithp@keithp.com>
36884 commit 7d90e2f6009e060fb59c519f7e564483a7ca6872
36885 Author: Keith Packard <keithp@keithp.com>
36886 Date: Tue Nov 23 20:17:44 2010 -0800
36888 altosui: Let people fire igniters that don't read as 'ready'
36890 This provides for igniter testing with LEDs or other materials that
36891 don't look like regular igniters.
36893 Signed-off-by: Keith Packard <keithp@keithp.com>
36895 commit f3233985a132e1d660e6df12d0056b6729f16faf
36896 Author: Keith Packard <keithp@keithp.com>
36897 Date: Tue Nov 23 19:09:31 2010 -0800
36899 altosui: Disable radio configation over packet link.
36901 Attempting to configure the radio over the packet link will only end
36902 up confusing the user, so disable it. This also works around a bug in
36903 older TM code which would lock up when trying to do this.
36905 Signed-off-by: Keith Packard <keithp@keithp.com>
36907 commit 6cd9be22f06f21d12ee2f668989d83d3c61d14c0
36908 Author: Keith Packard <keithp@keithp.com>
36909 Date: Tue Nov 23 19:08:07 2010 -0800
36911 altosui: New AltosSerial.set_radio function sets channel/call
36913 Use this anytime you need to set the device radio channel and call
36914 sign, either for telemetry reception or packet mode origination. This
36915 uses the saved callsign and per-device radio channel number. Do not
36916 use this when opening a telemetrum as there won't be a saved channel number.
36918 Signed-off-by: Keith Packard <keithp@keithp.com>
36920 commit ed7cf7d262fcf7c0c677c2fb981582b571de9e5e
36921 Author: Keith Packard <keithp@keithp.com>
36922 Date: Tue Nov 23 19:04:55 2010 -0800
36924 altosui: Make AltosSerial.flush_input keep reading while non-empty
36926 Flushing the input buffer can take a while, especially over the packet
36927 link. Keep reading while stuff is appearing on the reply queue.
36929 Signed-off-by: Keith Packard <keithp@keithp.com>
36931 commit 3b9db8c82d26a6a2e43d4ca40742fc1bdc502380
36932 Author: Keith Packard <keithp@keithp.com>
36933 Date: Tue Nov 23 19:02:54 2010 -0800
36935 altos: Make radio test command careful with the radio mutex.
36937 Remember whether the radio test mode is on or off and don't try to do
36938 either of them twice to prevent the mutex from being acquired or
36941 Signed-off-by: Keith Packard <keithp@keithp.com>
36943 commit 54468e5dc567aaac5c5c20e921859b7cec28bb88
36944 Author: Keith Packard <keithp@keithp.com>
36945 Date: Tue Nov 23 18:57:49 2010 -0800
36947 altos: Don't abort radio transmissions with ao_radio_abort
36949 We only want to abort pending radio reception to release the radio for
36950 other use, or to change the radio channel. Let radio transmission
36951 proceed. This fixes a problem with using packet mode to configure the
36952 radio channel; if the packet transmission is aborted, the TM ends up
36955 Signed-off-by: Keith Packard <keithp@keithp.com>
36957 commit d873dc28f0752aeb58a6263e42bdd5b9095bd392
36958 Author: Keith Packard <keithp@keithp.com>
36959 Date: Tue Nov 23 18:56:46 2010 -0800
36961 altos: remove unused variable from ao_igniter
36963 The 'status' variable used to hold a reported status value from the
36964 igniter after firing, but we ignore that now.
36966 Signed-off-by: Keith Packard <keithp@keithp.com>
36968 commit 71b1949e50f4533bcf44537da65b19bc67863c8e
36969 Merge: a79225c f1892b1
36970 Author: Anthony Towns <aj@erisian.com.au>
36971 Date: Wed Nov 24 12:14:11 2010 +1000
36973 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
36975 commit f1892b137b1de3d6caf0293bd40ed5c3e4948066
36976 Author: Bdale Garbee <bdale@gag.com>
36977 Date: Tue Nov 23 18:58:11 2010 -0700
36979 lose the placeholder on how GPS works, as it's going to be a
36980 while before I tackle that, if ever.
36982 commit a79225c215f17fa5218ddd9db4fc3f5c563a9f74
36983 Merge: 84cd5d4 853b711
36984 Author: Anthony Towns <aj@erisian.com.au>
36985 Date: Wed Nov 24 11:55:14 2010 +1000
36987 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
36989 commit 853b7112e34212040c4cb7289f9cfdb2f3ea9f90
36990 Author: Bdale Garbee <bdale@gag.com>
36991 Date: Tue Nov 23 18:53:18 2010 -0700
36993 merge Keith's AltosUI documention into "the big book"
36995 commit 84cd5d42d8b5659463544fe2a400758b56478609
36996 Author: Anthony Towns <aj@erisian.com.au>
36997 Date: Wed Nov 24 02:13:32 2010 +1000
36999 altosui: sitemap uses rocket gps if no pad gps
37001 commit c7119c21baa9d4ca681975b8613ade6593f65577
37002 Author: Anthony Towns <aj@erisian.com.au>
37003 Date: Wed Nov 24 02:11:36 2010 +1000
37005 altosui: don't switch away from user selected tab
37007 commit ae55a107f12546dc65f04618c7abc17beb920d73
37008 Merge: d1005f6 737f2fd
37009 Author: Anthony Towns <aj@erisian.com.au>
37010 Date: Wed Nov 24 01:53:46 2010 +1000
37012 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37014 commit 737f2fdd012202f453120ece117ae5e859b32082
37015 Author: Keith Packard <keithp@keithp.com>
37016 Date: Mon Nov 22 22:26:19 2010 -0800
37018 doc: Add internal documentation for AltOS
37020 Signed-off-by: Keith Packard <keithp@keithp.com>
37022 commit 5523e7d55ecc8d310e495fa4f5115f7483c42d65
37023 Author: Bdale Garbee <bdale@gag.com>
37024 Date: Mon Nov 22 21:07:10 2010 -0700
37026 add a rudimentary --help for command line use
37028 commit d1005f68376d695039c314b8d7a68bbf9acbca4f
37029 Merge: 9a83e0d 22c0978
37030 Author: Anthony Towns <aj@erisian.com.au>
37031 Date: Tue Nov 23 10:14:55 2010 +1000
37033 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37035 commit 22c09781af1df4b38562b577e9926c23e4a397f2
37036 Merge: b27327a a79606a
37037 Author: Keith Packard <keithp@keithp.com>
37038 Date: Mon Nov 22 16:02:22 2010 -0800
37040 Merge remote branch 'origin/buttonbox' into buttonbox
37042 commit b27327a05d249eaf969b67d2a8d12fc6a93841f0
37043 Author: Keith Packard <keithp@keithp.com>
37044 Date: Mon Nov 22 15:56:04 2010 -0800
37046 altos: assume igniter worked.
37048 Many igniters don't go open when fired, so there's no way
37049 to know if they worked. Assume they did as a failed igniter is
37050 unlikely to do anything when fired again anyways.
37052 Signed-off-by: Keith Packard <keithp@keithp.com>
37054 commit 68323cbb222f1f33198a42abaa0550af22f75a93
37055 Author: Keith Packard <keithp@keithp.com>
37056 Date: Mon Nov 22 15:53:27 2010 -0800
37058 altosui: Close serial port when debug link fails
37060 If the debug connection isn't working, close down the serial port when
37061 reporting the failure.
37063 Signed-off-by: Keith Packard <keithp@keithp.com>
37065 commit 9a83e0dc79f7a7467c7814d58daa2a2b89e50972
37066 Merge: 902735f a79606a
37067 Author: Anthony Towns <aj@erisian.com.au>
37068 Date: Tue Nov 23 08:07:04 2010 +1000
37070 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37072 commit a79606a6507fc01a74910f7959e84c4e9a730714
37073 Author: Bob Finch <w9ya@qrparci.net>
37074 Date: Mon Nov 22 12:24:42 2010 -0700
37076 Added PKGBUILDs for deps into contribs
37078 commit 377ee7e90ecd028f984cd1abce96b2efc3b5b977
37079 Author: Keith Packard <keithp@keithp.com>
37080 Date: Sun Nov 21 14:03:17 2010 -0800
37082 altos: Add on/off modes to 'C' command
37084 This lets the user turn the radio on/off and then invoke other commands.
37086 Signed-off-by: Keith Packard <keithp@keithp.com>
37088 commit 902735ffbfdd97672d52b09f17cdcd619193fd05
37089 Author: Anthony Towns <aj@erisian.com.au>
37090 Date: Mon Nov 22 05:29:26 2010 +1000
37092 altosui: keep sitemap more centred on rocket
37094 commit b85df38b5611e45cb9296df07b720badf74ac26e
37095 Author: Anthony Towns <aj@erisian.com.au>
37096 Date: Mon Nov 22 05:22:17 2010 +1000
37098 altosui: improve sitemap scrolling behaviour
37100 commit 4a9ded5b39ed08e13abc2cddba8b712f62b983f2
37101 Author: Anthony Towns <aj@erisian.com.au>
37102 Date: Sun Nov 21 17:39:50 2010 +1000
37104 AltosSiteMap: ensure buffer around active tile
37106 commit ec47bc93a487614714a752cb30ec9fe3d8f72929
37107 Merge: 0393830 e7954c8
37108 Author: Anthony Towns <aj@erisian.com.au>
37109 Date: Sun Nov 21 16:08:37 2010 +1000
37111 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37113 commit e7954c820763f80e993f9f822e837725cf36af84
37114 Author: Keith Packard <keithp@keithp.com>
37115 Date: Sat Nov 20 22:03:26 2010 -0800
37117 altosui: When fixing eeprom gps time information, make GPS data valid
37119 Eeprom files may be missing the GPS time (due to a firmware bug). Working
37120 around this involves finding the next valid GPS time and using that to
37121 create a fake GPS time entry. However, that next GPS time may not
37122 be locked or may have few sats as it is from the boost stage of the
37123 flight. Fix this by simply forcing the fake time packet to have
37124 4 sats and be locked.
37126 Signed-off-by: Keith Packard <keithp@keithp.com>
37128 commit 0393830f85da5efc96bbdf0d9769b66019c34b33
37129 Author: Anthony Towns <aj@erisian.com.au>
37130 Date: Sun Nov 21 15:13:35 2010 +1000
37132 AltosSiteMap: limit nr of tiles to 200x200
37134 commit a08b2a6363c194195db92029743f6612676373ce
37135 Author: Anthony Towns <aj@erisian.com.au>
37136 Date: Sun Nov 21 15:03:21 2010 +1000
37138 AltosSiteMap: never accept 0,0 as lat/long
37140 commit 84e570d8a8a52e0d358582135ec1b3a12be94c26
37141 Author: Anthony Towns <aj@erisian.com.au>
37142 Date: Sun Nov 21 14:45:10 2010 +1000
37144 AltosSiteMap: refactor tile collection
37146 commit 71e487344395a8efc9cd279aad92f601ff4c6d3d
37147 Author: Anthony Towns <aj@erisian.com.au>
37148 Date: Sun Nov 21 14:05:00 2010 +1000
37150 AltosSiteMap: thread safe tile addition
37152 commit c040bcd06679484175542208fb564d0271a7fc1b
37153 Author: Anthony Towns <aj@erisian.com.au>
37154 Date: Sun Nov 21 13:19:36 2010 +1000
37156 AltosSiteMap: try to get new tile construction right
37158 commit c3994dd82d489289ebc99ff9c5fa88f560c023ac
37159 Author: Anthony Towns <aj@erisian.com.au>
37160 Date: Sun Nov 21 13:07:11 2010 +1000
37162 AltosSiteMap: extend map if rocket goes far away
37164 commit 835b903727a2eabda8d9659cc46e53301f92897c
37165 Merge: 440a0f3 8789135
37166 Author: Anthony Towns <aj@erisian.com.au>
37167 Date: Sun Nov 21 11:15:02 2010 +1000
37169 Merge branch 'sitemap' into buttonbox
37172 ao-tools/altosui/AltosSiteMap.java
37174 commit 878913551a1e4e3c8f2b39fa4aeb234880735a1c
37175 Author: Anthony Towns <aj@erisian.com.au>
37176 Date: Sun Nov 21 10:55:22 2010 +1000
37178 AltosSiteMap: explain tile size better
37180 commit 440a0f3f5130eb0c8e614691892be8c94e7fd3c3
37181 Author: Keith Packard <keithp@keithp.com>
37182 Date: Sat Nov 20 16:55:12 2010 -0800
37184 altosui: Set site map flight path lines to 6 pixels anti-aliased.
37186 Much more visible over the map.
37188 Signed-off-by: Keith Packard <keithp@keithp.com>
37190 commit 2a7dc3ba36bac81640a9498e0d0caf1470b57c19
37191 Merge: e5b1ada ece2c86
37192 Author: Anthony Towns <aj@erisian.com.au>
37193 Date: Sun Nov 21 10:45:15 2010 +1000
37195 Merge branch 'buttonbox' into sitemap
37198 ao-tools/altosui/AltosFlightUI.java
37200 commit 8df185cd95cfecbed8272dd1275d077c5b45535b
37201 Merge: ece2c86 1e71264
37202 Author: Keith Packard <keithp@keithp.com>
37203 Date: Sat Nov 20 16:35:48 2010 -0800
37205 Merge remote branch 'aj/sitemap' into buttonbox
37208 ao-tools/altosui/AltosFlightUI.java
37210 Signed-off-by: Keith Packard <keithp@keithp.com>
37212 commit e5b1adae9b23b98a6321986f5cd67c9d3166b87f
37213 Author: Anthony Towns <aj@erisian.com.au>
37214 Date: Sun Nov 21 10:34:39 2010 +1000
37216 AltosSiteMap: better gps check, lower zoom
37218 commit ece2c86e2641b2cd613791293526c492b1606aa1
37219 Author: Keith Packard <keithp@keithp.com>
37220 Date: Sat Nov 20 16:19:42 2010 -0800
37222 altosui: Rewrite info table to mix with scroll pane well. Fix startup size
37224 Using a single table for the info table means that the scroll pane
37225 automatically picks up the table headers and shows them above the
37228 This patch also fixes the application size at startup so that no
37229 scrollbar is required in the info table, and the window is < 800x600.
37231 Signed-off-by: Keith Packard <keithp@keithp.com>
37233 commit 1e712647dd6df1e77650db705f3ac32a3c8f6907
37234 Author: Anthony Towns <aj@erisian.com.au>
37235 Date: Sun Nov 21 08:58:44 2010 +1000
37239 commit a59a204e188e40ec8848a0dc63d6de710cee3039
37240 Merge: 8263630 37f0201
37241 Author: Anthony Towns <aj@erisian.com.au>
37242 Date: Sun Nov 21 08:56:13 2010 +1000
37244 Merge branch 'buttonbox' into sitemap
37246 commit 82636305021c41d676f5f0f11378724fe0de0079
37247 Author: Anthony Towns <aj@erisian.com.au>
37248 Date: Sun Nov 21 08:44:13 2010 +1000
37250 AltosSiteMap: be more polite about preferred size
37252 commit 37f0201d724693528f37ac7d275f68f90cf94da0
37253 Author: Keith Packard <keithp@keithp.com>
37254 Date: Sat Nov 20 14:31:23 2010 -0800
37256 altosui: change descent tab formatting to four columns
37258 This places labels to the left of each field. For igniter voltages,
37259 it uses three columns for the labels.
37261 Signed-off-by: Keith Packard <keithp@keithp.com>
37263 commit 66ebd954d9c9a44a8db0ee713c682e39306fabd8
37264 Author: Anthony Towns <aj@erisian.com.au>
37265 Date: Sun Nov 21 08:28:24 2010 +1000
37269 commit 72f5e05f9f0055f2cef8b840812f090556c94338
37270 Author: Anthony Towns <aj@erisian.com.au>
37271 Date: Sun Nov 21 08:18:39 2010 +1000
37273 AltosSiteMap: major refactoring
37275 commit b47517d4c2e49f6f7b9954d2c85f96397fe1103e
37276 Author: Keith Packard <keithp@keithp.com>
37277 Date: Sat Nov 20 14:06:37 2010 -0800
37281 commit 6f8bc2ad20b715343e0510563ab0f14787ef3e07
37282 Author: Anthony Towns <aj@erisian.com.au>
37283 Date: Sun Nov 21 01:34:52 2010 +1000
37285 AltosDescent: switch elev from height to range
37287 commit 89f44c5587ea4f927d5e398b6af919df0d6561c3
37288 Author: Anthony Towns <aj@erisian.com.au>
37289 Date: Sun Nov 21 01:27:01 2010 +1000
37291 AltosAscent/Descent: tidy up layout
37293 commit 51e403145d28ac913e36d205077a613845596be2
37294 Author: Anthony Towns <aj@erisian.com.au>
37295 Date: Sun Nov 21 00:17:51 2010 +1000
37297 AltosSiteMapTile: draw boost circle as well as landed
37299 commit 25ffe1cc7823895886b4777f310b4bda1c80133b
37300 Author: Anthony Towns <aj@erisian.com.au>
37301 Date: Sun Nov 21 00:07:16 2010 +1000
37303 AltosSiteMap: automatic fetching of map data
37305 commit 20f714bbe3137de8fb7491b39985021fd1774930
37306 Author: Anthony Towns <aj@erisian.com.au>
37307 Date: Sat Nov 20 22:49:51 2010 +1000
37309 AltosSiteMapTile: seperate map and drawing layers
37311 commit 58f8d069ce9488e2987b8e92caa69fe68cda7569
37312 Author: Anthony Towns <aj@erisian.com.au>
37313 Date: Sat Nov 20 21:06:37 2010 +1000
37315 AltosSiteMap: add autoscroll and grabndrag scroll
37317 commit 74cab8503b51ba6fb05a4d12a031c749e870b0ef
37318 Merge: 0ecf033 9a99cab
37319 Author: Anthony Towns <aj@erisian.com.au>
37320 Date: Sat Nov 20 18:20:45 2010 +1000
37322 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37324 commit 0ecf033110084f1a8be98282d7029dc14f70dab5
37325 Merge: 081fbd5 71c41ea
37326 Author: Anthony Towns <aj@erisian.com.au>
37327 Date: Sat Nov 20 18:14:30 2010 +1000
37329 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37331 commit 9a99cabc1c34c657fc95246192ba6d330f5f22d3
37332 Author: Keith Packard <keithp@keithp.com>
37333 Date: Sat Nov 20 00:13:58 2010 -0800
37335 altosui: Fix channel changing in flight UI to actually work
37337 Replacing the menu with a combo box required reworking the way events
37338 are delivered from that widget back to the channel changing
37339 function. Just delete the old magic and use the JComboBox action
37342 Signed-off-by: Keith Packard <keithp@keithp.com>
37344 commit 71c41eadd12c3ece5fffce7669e4991778046d4e
37345 Author: Keith Packard <keithp@keithp.com>
37346 Date: Sat Nov 20 00:09:03 2010 -0800
37348 altosui: Initialize display thread state in constructor instead of run
37350 Some state will get set before run is called, initializing it there
37353 Signed-off-by: Keith Packard <keithp@keithp.com>
37355 commit 081fbd5715f9d3d81d98e149fb95d40447c07a79
37356 Merge: 90b9bc4 7920ed5
37357 Author: Anthony Towns <aj@erisian.com.au>
37358 Date: Sat Nov 20 17:40:49 2010 +1000
37360 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37363 ao-tools/altosui/AltosFlightUI.java
37365 commit 7920ed5c34b088f45ce4213b061ddd1ffe22cee8
37366 Author: Keith Packard <keithp@keithp.com>
37367 Date: Fri Nov 19 23:18:51 2010 -0800
37369 altosui: calling thread.interrupt with null thread doesn't work well
37371 This was a left-over from debugging the previous patch.
37373 Signed-off-by: Keith Packard <keithp@keithp.com>
37375 commit 8c8dc3794c7b5fa5a5b43b1c461d6c8bb3ab425d
37376 Author: Keith Packard <keithp@keithp.com>
37377 Date: Fri Nov 19 23:09:15 2010 -0800
37379 altosui: When switching log files, don't terminate log thread
37381 The log thread automatically switches output files when the incoming
37382 telemetry changes. Don't use 'close' for that as 'close' terminates
37383 the log thread as well as closing the file. Create a new
37384 'close_log_file' function which just closes the file.
37386 Signed-off-by: Keith Packard <keithp@keithp.com>
37388 commit 594e80572821f1848db062d0cff18ca8bf0d90ce
37389 Author: Keith Packard <keithp@keithp.com>
37390 Date: Fri Nov 19 22:44:48 2010 -0800
37392 altosui: switch channel selector to combo box. Shorten displayed device names
37394 A combo box displays the current value, which is quite nice to
37395 have. Add a 'toShortString' for AltosDevice so that the window frames
37396 and error messages don't have extra spaces generated by the
37397 altos_device toString method.
37399 Signed-off-by: Keith Packard <keithp@keithp.com>
37401 commit fa07afc73bc5eccff8464a2def05ad600da33c97
37402 Author: Bdale Garbee <bdale@gag.com>
37403 Date: Fri Nov 19 23:33:42 2010 -0700
37405 update turnon scripts to use stashed copies of stable release firmware
37407 commit 9ffc2eb53a47e435f39b02896b0e43ae5f47f450
37408 Author: Keith Packard <keithp@keithp.com>
37409 Date: Fri Nov 19 18:25:48 2010 -0800
37411 altosui: Use timeouts to recover from broken packet links.
37413 This puts timeouts every place the system reads from the packet link
37414 and aborts the in-progress operation if it takes more than a second to
37417 Also mixed in here are persistent igniter status displays for the
37418 ejection testing UI.
37420 Signed-off-by: Keith Packard <keithp@keithp.com>
37422 commit 68078eab3c07d8dc83302747cf6f3dcb1797c6ce
37423 Author: Keith Packard <keithp@keithp.com>
37424 Date: Fri Nov 19 20:44:29 2010 +0800
37426 doc: Document the 'Flash Image' operation.
37428 Signed-off-by: Keith Packard <keithp@keithp.com>
37430 commit b4bdda65488e8ef27d2889cb6cc8eda3c5d50e0a
37431 Author: Keith Packard <keithp@keithp.com>
37432 Date: Fri Nov 19 20:29:14 2010 +0800
37434 doc: git ignore generated doc files
37436 Signed-off-by: Keith Packard <keithp@keithp.com>
37438 commit f0542085de2139ef562af068ec05fa73f47c73b1
37439 Author: Keith Packard <keithp@keithp.com>
37440 Date: Fri Nov 19 20:26:49 2010 +0800
37442 doc: Add preliminary altosui documentation
37444 Also, update the Makefile to allow for further documents to be added
37445 without a lot of custom rules.
37447 Signed-off-by: Keith Packard <keithp@keithp.com>
37449 commit 0e7a10f71803d60f8b34c5a91efd220449442769
37450 Author: Keith Packard <keithp@keithp.com>
37451 Date: Fri Nov 19 17:16:03 2010 +0800
37453 altosui: Clean up global AltosUI configuration settings dialog
37455 This dialog had a mish-mash of styles and was confusing.
37456 Now it's got a label for each line, and suitable setters for
37459 Signed-off-by: Keith Packard <keithp@keithp.com>
37461 commit 8f72f08839346fb225238420324f0edcd070e531
37462 Author: Keith Packard <keithp@keithp.com>
37463 Date: Fri Nov 19 17:14:17 2010 +0800
37465 altosui: Unify datafile selection to AltosDataChooser
37467 Instead of having several separate intefaces, use a single dialog for
37468 selecting data files for graph/export/replay.
37470 Signed-off-by: Keith Packard <keithp@keithp.com>
37472 commit 24ffcf86c43290ce0f70fb4ee0984b3debdb8a5f
37473 Author: Keith Packard <keithp@keithp.com>
37474 Date: Fri Nov 19 15:41:30 2010 +0800
37476 altosui: Add igniter ground testing code
37478 Not yet hooked up, but the UI is finished.
37480 Signed-off-by: Keith Packard <keithp@keithp.com>
37482 commit 90b9bc4475011bead7117ed72fa5efa0f77b2813
37483 Author: Anthony Towns <aj@erisian.com.au>
37484 Date: Fri Nov 19 13:30:00 2010 +1000
37486 AltosSiteMapTile: adjust scale to 1 nmi per tile
37488 commit fa45336062523838ba8abb08427cdc4d9c7de7a8
37489 Author: Anthony Towns <aj@erisian.com.au>
37490 Date: Fri Nov 19 13:17:29 2010 +1000
37492 AltosSiteMapTile: adjust centering calculation
37494 commit fda93afcd8aa4133b0e5f008b824d072e338d0ed
37495 Author: Anthony Towns <aj@erisian.com.au>
37496 Date: Fri Nov 19 13:02:05 2010 +1000
37498 AltosSiteMapTile: autoscale to about 2 nmi per tile
37500 commit 483346a03c94b200692f5e6d59f3feee4dcf2ace
37501 Author: Anthony Towns <aj@erisian.com.au>
37502 Date: Fri Nov 19 12:09:46 2010 +1000
37504 altosui: tile site maps
37506 commit 939be6793238a275b7682ecc376fed14379cf044
37507 Merge: e68fe94 1a4b6e9
37508 Author: Anthony Towns <aj@erisian.com.au>
37509 Date: Thu Nov 18 05:54:06 2010 +1000
37511 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37514 ao-tools/altosui/AltosFlightUI.java
37516 commit 1a4b6e96f823035b113f01d1bdfd61afc1f33e25
37517 Author: Keith Packard <keithp@keithp.com>
37518 Date: Tue Nov 16 22:46:29 2010 +0800
37520 altosui: Add igniter status to ascent and descent tabs
37522 Monitor igniters during all phases of the flight.
37524 Signed-off-by: Keith Packard <keithp@keithp.com>
37526 commit d0eb41619544ead6d9dab3a8d024a12936c9cdd0
37527 Author: Keith Packard <keithp@keithp.com>
37528 Date: Tue Nov 16 22:20:00 2010 +0800
37530 altosui: Cleanup flight UI layout
37532 Use common constants for fonts and insets
37533 Shrink fonts so that the window is < 600 pixels tall.
37535 Signed-off-by: Keith Packard <keithp@keithp.com>
37537 commit fcca333cda64be35f0c9fb0109eef1be3709dddd
37538 Author: Keith Packard <keithp@keithp.com>
37539 Date: Tue Nov 16 21:49:59 2010 +0800
37541 altosui: Add callsign configuration in AltosUI configuration dialog
37543 This callsign is used during packet communication.
37545 Signed-off-by: Keith Packard <keithp@keithp.com>
37547 commit d1dbe3b69e6f95ef8ecd4cf959863b922ab47c66
37548 Author: Bdale Garbee <bdale@gag.com>
37549 Date: Mon Nov 15 11:08:00 2010 -0700
37551 add a paragraph about forcing TM back to idle mode if an accel cal goes badly
37553 commit 39e371561469d8e5059638ffa4e7075f391de268
37554 Author: Keith Packard <keithp@keithp.com>
37555 Date: Mon Nov 15 23:14:51 2010 +0800
37557 altosui: add reboot button to telemetrum configuration UI
37559 This lets you reconfigure and reboot telemetrum, including over the
37562 Signed-off-by: Keith Packard <keithp@keithp.com>
37564 commit 257e97137325f5dbbd6aa034f20fd6937b67df90
37565 Author: Keith Packard <keithp@keithp.com>
37566 Date: Mon Nov 15 22:38:35 2010 +0800
37568 altosui: eliminate menu bar, moving elements to buttons.
37570 This adds a new 'configure AltosUI' dialog to set the log directory
37571 and voice preferences.
37573 Signed-off-by: Keith Packard <keithp@keithp.com>
37575 commit 524644d8d8ce3f8a5a914ecfc7e2a8d474d89095
37576 Author: Keith Packard <keithp@keithp.com>
37577 Date: Mon Nov 15 22:04:44 2010 +0800
37579 altosui: oops, missed a file in the previous commit
37581 AltosSerialInUseException.java just defines a new exception, thanks to
37582 java for making this live in a separate file.
37584 Signed-off-by: Keith Packard <keithp@keithp.com>
37586 commit 511903704f7e1b22e88dd3e3cc35fd3c0583820e
37587 Author: Keith Packard <keithp@keithp.com>
37588 Date: Sun Nov 14 03:26:57 2010 -0800
37590 altosui: With --replay option, exit when replay window is closed
37592 Otherwise, the application hangs around forever.
37594 Signed-off-by: Keith Packard <keithp@keithp.com>
37596 commit 11c95f687b1f68d35fa1a0af2c4e7982b8bb226a
37597 Author: Keith Packard <keithp@keithp.com>
37598 Date: Sat Nov 13 17:09:51 2010 -0800
37600 altosui: Replace flight status table with labels, fix resize.
37602 There's no reason to use a table for the flight status data,
37603 replace that with a selection of widgets instead.
37605 Also, set all of the grid bag constraints for the various flight
37606 status displays so that resize does something sensible.
37608 Adds a scrollbar to the table display so that it can shrink.
37610 Signed-off-by: Keith Packard <keithp@keithp.com>
37612 commit dcfa56498d1b65a213b8aba9cbd6c4806532383c
37613 Author: Keith Packard <keithp@keithp.com>
37614 Date: Sat Nov 13 16:07:04 2010 -0800
37616 altosui: Open serial device at 'new' time. Prohibit duplicate opens.
37618 With the per-serial UI, there's never a reason to create a serial
37619 device without opening it right away. This eliminates the bug caused
37620 by not opening the serial device for telemetry reception.
37622 Serial devices can now be opened only once; this eliminates errors
37623 when trying to reflash or configure devices while receiving telemetry.
37625 Signed-off-by: Keith Packard <keithp@keithp.com>
37627 commit 8463ffcaca6bcd31e645aba71c171f548dce96d8
37628 Author: Keith Packard <keithp@keithp.com>
37629 Date: Sat Nov 13 15:19:14 2010 -0800
37631 altosui: Eliminate unncessary import altosui lines
37633 Java appears to automatically import every module from the current
37636 Signed-off-by: Keith Packard <keithp@keithp.com>
37638 commit 566c6486c8815ae241e0b116a93b1a0ff4783831
37639 Author: Bdale Garbee <bdale@gag.com>
37640 Date: Sat Nov 13 12:19:12 2010 -0700
37642 continuing to work on the docs
37644 commit e68fe9454352087889c560d95797922493117acb
37645 Author: Anthony Towns <aj@erisian.com.au>
37646 Date: Sun Nov 14 00:59:01 2010 +1000
37648 AltosSiteMap: add targeting circles around landing site
37650 commit 1e7e02987276847274493312202d22222c953149
37651 Author: Anthony Towns <aj@erisian.com.au>
37652 Date: Sun Nov 14 00:57:45 2010 +1000
37654 AltosTelemetryReader: actually open serial port
37656 commit 9c32b93ef5fb43558fb0179ea1b047e35b7ed6e8
37657 Merge: 991541f a6f30fa
37658 Author: Anthony Towns <aj@erisian.com.au>
37659 Date: Sun Nov 14 00:29:11 2010 +1000
37661 Merge branch 'buttonbox' of git://git.gag.com/fw/altos into buttonbox
37663 commit a6f30fae906bd87dff192c5fd4d10df283f99930
37664 Author: Keith Packard <keithp@keithp.com>
37665 Date: Fri Nov 12 17:02:22 2010 -0800
37667 altosui: Add RF calibration to TeleMetrum config dialog
37669 I think that's the last user-settable value.
37671 Signed-off-by: Keith Packard <keithp@keithp.com>
37673 commit 1bdc6166f3bc5ce3f8e55acb1484923781412e21
37674 Merge: f111871 5c6a533
37675 Author: Bdale Garbee <bdale@gag.com>
37676 Date: Fri Nov 12 17:32:43 2010 -0700
37678 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
37680 commit f1118717780a81f9257d2eed7828b66538deb8a8
37681 Author: Bdale Garbee <bdale@gag.com>
37682 Date: Fri Nov 12 17:32:21 2010 -0700
37684 fold in content from Keith's email on the re-flashing subject
37686 commit 7def9dd0d0a4ce9cf7c65de573100e664f278717
37687 Author: Bdale Garbee <bdale@gag.com>
37688 Date: Fri Nov 12 10:58:54 2010 -0700
37690 first cut at instructions on how to re-flash TM and TD devices based on email
37691 reply to a user who asked
37693 commit 991541f57f065f429c6ec425efd6ac731280b2c1
37694 Author: Anthony Towns <aj@erisian.com.au>
37695 Date: Fri Nov 12 23:42:42 2010 +1000
37697 better error behaviour if no map
37699 commit 1bcfa22de7821984149db10cb79913efed36b41e
37700 Author: Anthony Towns <aj@erisian.com.au>
37701 Date: Fri Nov 12 23:29:40 2010 +1000
37703 pull up maps for arbitrary locations
37705 commit beb6c881ec006241c7d2820c64e5381131d41180
37706 Author: Anthony Towns <aj@erisian.com.au>
37707 Date: Fri Nov 12 03:24:26 2010 +1000
37709 make infotable scrollable, revert its fontsize to 14
37711 commit 0327c1da01a3f6ede01f05c1d775651a57fd0c68
37712 Author: Anthony Towns <aj@erisian.com.au>
37713 Date: Fri Nov 12 02:08:58 2010 +1000
37717 commit 81e7b43ecad666e2e2310c7c94184f888bc86585
37718 Author: Anthony Towns <aj@erisian.com.au>
37719 Date: Fri Nov 12 02:07:41 2010 +1000
37721 add site map tab, at least for QRS launches
37723 commit 5394548fa5c7bdbfcc01e8aa19e93e1cf6345e2a
37724 Merge: 891e629 75f7698
37725 Author: Keith Packard <keithp@keithp.com>
37726 Date: Wed Nov 10 22:11:21 2010 -0800
37728 Merge remote branch 'aj/buttonbox' into buttonbox
37730 commit 75f7698b99a661ed17a91748a99699fa6761772a
37731 Author: Anthony Towns <aj@erisian.com.au>
37732 Date: Thu Nov 11 16:06:32 2010 +1000
37734 add compass bearing during descent
37736 commit cc0a730de093c49be2a921101d27622b6f592e92
37737 Author: Anthony Towns <aj@erisian.com.au>
37738 Date: Thu Nov 11 15:57:52 2010 +1000
37740 add compass bearing to voice output
37742 commit 317ec72a34906faad88c6924e634617b074e71db
37743 Author: Anthony Towns <aj@erisian.com.au>
37744 Date: Thu Nov 11 15:52:01 2010 +1000
37746 use grayled.png for off
37748 commit 8503943e3613f8670b128012b12ff14fb54321d7
37749 Author: Anthony Towns <aj@erisian.com.au>
37750 Date: Thu Nov 11 15:45:43 2010 +1000
37752 reduce font size for FlightInfoTable
37754 commit 3ffaa5d1c00b28be20fd4a26deb7bd41d953e92a
37755 Author: Anthony Towns <aj@erisian.com.au>
37756 Date: Thu Nov 11 15:43:05 2010 +1000
37758 read preferences for --replay
37760 commit 1f3e091efdfb2fe6f06a066cac60f5d267b94856
37761 Author: Anthony Towns <aj@erisian.com.au>
37762 Date: Thu Nov 11 15:40:37 2010 +1000
37764 add --replay command line argument
37766 commit b16b873723ee3e5097e6725c59ce191119439ad7
37767 Author: Anthony Towns <aj@erisian.com.au>
37768 Date: Thu Nov 11 15:38:27 2010 +1000
37770 use value_font for values
37772 commit 891e629f6ba20654b614f3ca7211a0f1c92670cb
37773 Author: Keith Packard <keithp@keithp.com>
37774 Date: Wed Nov 10 16:28:19 2010 -0800
37776 altos: Use grey leds when unlit - easier to see
37778 commit 5c6a5335a057be0219450b4b9889c647d8d4a012
37779 Author: Bob Finch <w9ya@qrparci.net>
37780 Date: Mon Nov 1 14:36:41 2010 -0600
37782 Updated PKGBUILD-git.altos
37784 Signed-off-by: Keith Packard <keithp@keithp.com>
37786 commit b0d31910da592e2f67c47c8fc3e15ce8135d5094
37787 Author: Keith Packard <keithp@keithp.com>
37788 Date: Tue Nov 9 23:34:32 2010 -0800
37790 altosui: Add ascent, descent and landed tabs
37792 This completes the set of tabs for in-flight status information.
37794 Signed-off-by: Keith Packard <keithp@keithp.com>
37796 commit 22d00785188a880700cd372528189a7a15278da9
37797 Author: Keith Packard <keithp@keithp.com>
37798 Date: Tue Nov 9 14:40:58 2010 -0800
37800 altosui: Add tab UI with 'pad' mode.
37802 This creates a multi-tab interface for flight monitoring
37803 and includes a special tab for 'pad' mode.
37805 Signed-off-by: Keith Packard <keithp@keithp.com>
37807 commit eb77e806ded99532dc7eaa39c1893f075b028af6
37808 Author: Keith Packard <keithp@keithp.com>
37809 Date: Tue Nov 9 10:21:34 2010 -0800
37811 altosui: Create abstract interface for flight data display
37813 This allows the implementation of the flight data display to occur in
37814 the flight UI instead of the display thread.
37816 Signed-off-by: Keith Packard <keithp@keithp.com>
37818 commit a0a92c605e238277c9881545a7226e53b5dbc295
37819 Author: Keith Packard <keithp@keithp.com>
37820 Date: Mon Nov 8 22:17:26 2010 -0800
37822 altosui: Fix more calls to AltosPreferences.channel()
37826 Signed-off-by: Keith Packard <keithp@keithp.com>
37828 commit 94f4a50d6430cc8280cbdaa9f39d3cb858d0e077
37829 Author: Keith Packard <keithp@keithp.com>
37830 Date: Mon Nov 8 22:10:46 2010 -0800
37832 altosui: Fix channel setting at serial open time
37834 Was using the previous non-device-specific preferences API.
37836 Signed-off-by: Keith Packard <keithp@keithp.com>
37838 commit 6b17d276271faa8a420a1c8f6be17faaa0c7043c
37839 Author: Keith Packard <keithp@keithp.com>
37840 Date: Mon Nov 8 22:07:04 2010 -0800
37842 altosui: Create buttons for main actions
37844 Signed-off-by: Keith Packard <keithp@keithp.com>
37846 commit 16916be51d746b1e1057b3219e5bec8f8814259e
37847 Author: Keith Packard <keithp@keithp.com>
37848 Date: Fri Nov 5 23:44:47 2010 -0700
37850 altosui: Split out flight monitoring to separate window
37852 This creates a per-TD (or replay) window to contain the flight
37853 monitoring information, allowing multiple monitors.
37855 This also adds per-TD preferences for monitoring channel.
37857 Signed-off-by: Keith Packard <keithp@keithp.com>
37859 commit ca931b1c484bd6b64617370e81b16e169fdae1c2
37860 Author: Bdale Garbee <bdale@gag.com>
37861 Date: Wed Oct 6 17:47:44 2010 -0600
37863 update changelogs for Debian build
37865 commit 811ced628d586134224c1b501b40ce9eb435fc7c
37866 Author: Keith Packard <keithp@keithp.com>
37867 Date: Wed Oct 6 16:42:27 2010 -0700
37869 altosui: Separate out jfreechart and jcommon directories
37871 This allows these packages to be referenced separately
37873 Signed-off-by: Keith Packard <keithp@keithp.com>
37875 commit c2c4d515ef9cc2cae8a8f2803e9498bb0794c4ed
37876 Author: Keith Packard <keithp@keithp.com>
37877 Date: Wed Oct 6 16:25:49 2010 -0700
37879 altosui: Remove ability to graph data in .csv files
37881 There's no reason to support these files when the raw .eeprom or
37882 .telem files which generate them should be used instead.
37884 Signed-off-by: Keith Packard <keithp@keithp.com>
37886 commit d5caf6f2f4d9257e26aa4305b26c02d1b263fa24
37887 Author: Bdale Garbee <bdale@gag.com>
37888 Date: Wed Oct 6 17:14:35 2010 -0600
37890 remove the csv build dep, as that code will be abandoned
37892 commit 43e23a60780191e3c6f61df44c5dd08cc8604c51
37893 Author: Bdale Garbee <bdale@gag.com>
37894 Date: Wed Oct 6 16:27:57 2010 -0600
37896 update changelogs for Debian build
37898 commit 8103432bf7adfe6ee5bf3ee42e1672475e6edd5a
37899 Author: Bdale Garbee <bdale@gag.com>
37900 Date: Wed Oct 6 16:26:33 2010 -0600
37902 update changelogs for Debian build
37904 commit 635066cd35fb24cacf8400a477ea4b4e3dd2c39c
37905 Author: Bdale Garbee <bdale@gag.com>
37906 Date: Wed Oct 6 16:26:19 2010 -0600
37908 update changelogs for Debian build
37910 commit 4396aaaf34cda3751dcca0eceb05b4ffeb411cde
37911 Author: Bdale Garbee <bdale@gag.com>
37912 Date: Wed Oct 6 16:25:22 2010 -0600
37914 add build-dep on libcsv-java
37916 commit 7475ab5804bf3fb12b1b755e850af90d5a15d3eb
37917 Author: Bdale Garbee <bdale@gag.com>
37918 Date: Wed Oct 6 16:19:35 2010 -0600
37920 update changelogs for Debian build
37922 commit d8a2f4ceb1c70a6be976a78e2264c961de2f2277
37923 Author: Bdale Garbee <bdale@gag.com>
37924 Date: Wed Oct 6 16:18:45 2010 -0600
37926 add build dep on jfreechart lib
37928 commit f0d1468ceae065f0cdae6f6ae3323dec5636f073
37929 Author: Keith Packard <keithp@keithp.com>
37930 Date: Tue Sep 28 17:56:49 2010 -0700
37932 altosui: Add KML file export.
37934 Command line has switches now, --kml and --csv
37935 Export save dialog has combo box to select kml or csv result.
37937 Signed-off-by: Keith Packard <keithp@keithp.com>
37939 commit 5a119fd92532d53e552efe1f7c61e87181fcace0
37940 Merge: 28da340 82744c3
37941 Author: Keith Packard <keithp@keithp.com>
37942 Date: Mon Sep 27 22:28:07 2010 -0700
37944 Merge remote branch 'aj/master'
37946 commit 82744c3497d37650b88dee80be7956c4bd1cffb2
37947 Author: Anthony Towns <aj@erisian.com.au>
37948 Date: Tue Sep 28 15:27:07 2010 +1000
37950 Add callsign/serial/flight to graph title
37952 commit 28da3406426437604125d332e4cda90d459df487
37953 Author: Keith Packard <keithp@keithp.com>
37954 Date: Mon Sep 27 22:26:56 2010 -0700
37956 altosui: use Altos constants in graphing code
37958 The Altos class nicely defines constants for all of the flight states.
37960 Signed-off-by: Keith Packard <keithp@keithp.com>
37962 commit ce7f59fbfb5a94a67a4ceced3cc371b4c6b6e5d1
37963 Author: Anthony Towns <aj@erisian.com.au>
37964 Date: Tue Sep 28 14:45:01 2010 +1000
37966 Hax0r graphing to support telem/eeprom files
37968 commit e2b9f47a205348d38756c70e928a2a9183de6884
37969 Merge: 7ef3ad0 8032031
37970 Author: Anthony Towns <aj@erisian.com.au>
37971 Date: Tue Sep 28 12:55:47 2010 +1000
37973 Merge branch 'master' of git://git.gag.com/fw/altos
37975 commit 803203197e51e71e9c77b3610047fd5bf9a56c56
37976 Author: Keith Packard <keithp@keithp.com>
37977 Date: Mon Sep 27 18:52:30 2010 -0700
37979 altosui: Deal with eeprom dates going backwards across wrap
37981 eeprom timestamps can go backwards as the GPS time stamps are
37982 recorded when the first GPS character is received, but not placed into
37983 the eeprom log until the last GPS packet is complete. If this happens
37984 at the same time the tick count is wrapping, then the tick count will
37985 wrap backwards across the 0 boundary causing time to jump forwards.
37987 Fix this by letting time go backwards across the tick boundary, which
37988 requires that we know when the first 'real' tick is read from the
37991 Signed-off-by: Keith Packard <keithp@keithp.com>
37993 commit fe7eba2e4af36cf29d8dc2378ac6985be04f68c6
37994 Author: Keith Packard <keithp@keithp.com>
37995 Date: Mon Sep 27 18:51:05 2010 -0700
37997 altosui: .CSV output: add link quality, gps hdop and sat C/N0 numbers
37999 This makes the CSV files contain all of the available information.
38001 Signed-off-by: Keith Packard <keithp@keithp.com>
38003 commit c89a34d1eb25155405b0036baeadc7bbfeade1c2
38004 Author: Keith Packard <keithp@keithp.com>
38005 Date: Mon Sep 27 17:11:48 2010 -0700
38007 altosui: Create iterables for log file scanning. Split out display threads
38009 Convert from log file reading paradigm to using iterators which is
38010 more idiomatic for java. Split more code out of AltosUI.java,
38011 including the display update threads for telemetry monitoring and
38014 Signed-off-by: Keith Packard <keithp@keithp.com>
38016 commit 7ef3ad0c9354c0484c25badc69334b59c7f355e2
38017 Merge: eb74866 e66919a
38018 Author: Anthony Towns <aj@erisian.com.au>
38019 Date: Fri Sep 24 10:28:06 2010 +1000
38021 Merge branch 'master' of git://git.gag.com/fw/altos
38023 commit e66919aa46193bd8c7a1e86fb32a3367dae121f5
38024 Author: Keith Packard <keithp@keithp.com>
38025 Date: Thu Sep 23 16:52:51 2010 -0700
38027 altosui: Require 4 sats for 'good' GPS data
38029 Wait for 10 consecutive GPS reports with at least 4 sats before
38030 reporting "GPS ready" state.
38032 Signed-off-by: Keith Packard <keithp@keithp.com>
38034 commit 34ca8c00f4be72c314baff4c96f1e2f010948454
38035 Author: Keith Packard <keithp@keithp.com>
38036 Date: Mon Sep 20 06:30:49 2010 -0700
38038 altosui: remove unused ReplayThread wrapper classes
38040 These aren't used now that the replay opener dialog knows how to build
38041 a reader from a filename.
38043 Signed-off-by: Keith Packard <keithp@keithp.com>
38045 commit fd010661ced6075f82a961625826665a3d8d1efe
38046 Author: Keith Packard <keithp@keithp.com>
38047 Date: Mon Aug 30 14:00:04 2010 -0700
38049 altosui: Factor some UI elements into separate classes
38051 Clean up AltosUI by moving the two main tables to separate class files.
38053 Signed-off-by: Keith Packard <keithp@keithp.com>
38055 commit eb74866e919e8c661153847871f5a79e66d37296
38056 Merge: af404b4 1260589
38057 Author: Anthony Towns <aj@erisian.com.au>
38058 Date: Mon Sep 20 22:05:26 2010 +1000
38060 Merge branch 'master' of git://git.gag.com/fw/altos
38062 commit 1260589976c1a95848b298497fd251c4ee7d3f93
38063 Author: Keith Packard <keithp@keithp.com>
38064 Date: Sun Sep 19 02:52:29 2010 -0700
38066 altosui: Write raw sensor data to .csv files
38068 For data export, provide the raw sensor samples instead of the
38071 Signed-off-by: Keith Packard <keithp@keithp.com>
38073 commit 7a4d7110debb88f4e906fee7c46f2badd561809d
38074 Author: Keith Packard <keithp@keithp.com>
38075 Date: Sun Sep 19 02:50:43 2010 -0700
38077 altosui: Use recorded ground acceleration when reading eeprom files
38079 The flight software records 1000 accelerometer samples and records
38080 that in the flight log. Use that value instead of using the very few
38081 samples recorded in the eeprom before boost is detected. This
38082 generates far more accurate accerometer data in the .csv files.
38084 Signed-off-by: Keith Packard <keithp@keithp.com>
38086 commit af404b428bd742039afc25ff3850f76bc92c7c29
38087 Author: Anthony Towns <aj@erisian.com.au>
38088 Date: Wed Sep 15 07:24:04 2010 +1000
38090 Add JFreeChart to Makefile.am
38092 commit 61590b8729831cb138b2ba6b88802c208d114753
38093 Author: Anthony Towns <aj@erisian.com.au>
38094 Date: Wed Sep 15 06:51:05 2010 +1000
38098 commit 3d64f5a6511529ca53699190f4d54de1ba62a9bd
38099 Merge: ec6da08 b9623f8
38100 Author: Anthony Towns <aj@erisian.com.au>
38101 Date: Sat Sep 11 15:15:14 2010 +1000
38103 Merge branch 'master' of git://git.gag.com/fw/altos
38105 commit b9623f8ef26491e9fa14e2478295fe6f5cbbd87f
38106 Author: Keith Packard <keithp@keithp.com>
38107 Date: Fri Sep 10 21:07:14 2010 -0700
38109 altosui: Remember directory containing firmware files
38111 Instead of forcing the user to navigate to the firmware directory each
38112 time, this remembers the previous directory and starts there.
38114 Signed-off-by: Keith Packard <keithp@keithp.com>
38116 commit 7f2204e0832b14b1edca4266a2cbc272141ecc2b
38117 Author: Keith Packard <keithp@keithp.com>
38118 Date: Fri Sep 10 20:55:05 2010 -0700
38120 altosui: set default .csv file name in file save dialog
38122 This uses setSelectedFile to specify which output filename to make the
38123 default in the save dialog.
38125 Signed-off-by: Keith Packard <keithp@keithp.com>
38127 commit 7e053ae1f2d09347123ac9fa79e46645378b4c70
38128 Author: Bdale Garbee <bdale@gag.com>
38129 Date: Fri Sep 10 10:42:35 2010 -0600
38131 make the column headers comma separated, too, so they align with the data
38133 commit ec6da0824474e46de842845d7b53fe1a1dde33ed
38134 Merge: 7c2e411 1031067
38135 Author: Anthony Towns <aj@erisian.com.au>
38136 Date: Fri Sep 10 16:11:34 2010 +1000
38138 Merge branch 'master' of git://git.gag.com/fw/altos
38140 commit 10310672a83a66dc630718b151d653fc066f8e59
38141 Author: Bdale Garbee <bdale@gag.com>
38142 Date: Fri Sep 10 00:09:25 2010 -0600
38144 update changelogs for Debian build
38146 commit 9d0e89e8ad8926dc8371fa809835a580ae49711d
38147 Author: Keith Packard <keithp@keithp.com>
38148 Date: Thu Sep 9 23:04:59 2010 -0700
38150 altosui: Stop parsing eeprom file after hitting 'landed' state
38152 Sometimes there are additional records found in the eeprom file; the
38153 reader is mostly worried about not losing anything, so it reads as
38154 much as it can. However, the last record written for any flight is the
38155 'landed' record, so we can stop looking at the file after hitting that.
38157 Signed-off-by: Keith Packard <keithp@keithp.com>
38159 commit 67b6952f7126704478ede5575e5e938d18fcc329
38160 Author: Keith Packard <keithp@keithp.com>
38161 Date: Thu Sep 9 23:04:14 2010 -0700
38163 altosui: Fill in time value of last Eeprom record read from file
38165 The last record is handled separately, and was missing the code to
38166 compute the time. Sigh.
38168 Signed-off-by: Keith Packard <keithp@keithp.com>
38170 commit 8b0b584cd0ca7542e65aac0c7897ad7ab4115122
38171 Author: Keith Packard <keithp@keithp.com>
38172 Date: Thu Sep 9 22:55:47 2010 -0700
38174 altosui: Remove debug printfs from AltosTelemetryReader
38176 Signed-off-by: Keith Packard <keithp@keithp.com>
38178 commit a80bfae15f1499c49f7ef47978bf0337d8120892
38179 Author: Bdale Garbee <bdale@gag.com>
38180 Date: Thu Sep 9 23:57:34 2010 -0600
38182 rewind packaging changelog, again
38184 commit 78ce3120e5a53858ca0d43c734aa5d28b4948ce3
38185 Author: Bdale Garbee <bdale@gag.com>
38186 Date: Thu Sep 9 23:52:20 2010 -0600
38188 update changelogs for Debian build
38190 commit 71c85613a28c24c3aad7b4aa3299d8677ef1268e
38191 Author: Bdale Garbee <bdale@gag.com>
38192 Date: Thu Sep 9 23:51:23 2010 -0600
38194 rewind packaging changelog
38196 commit 7c2e4114a3a43f919a7a6c967d3f16e5d630f90f
38197 Merge: ddc83b4 af200f5
38198 Author: Anthony Towns <aj@erisian.com.au>
38199 Date: Fri Sep 10 15:50:01 2010 +1000
38201 Merge branch 'master' of git://git.gag.com/fw/altos
38203 commit af200f5b84555de0556b52146379f3934774a3f3
38204 Author: Keith Packard <keithp@keithp.com>
38205 Date: Thu Sep 9 22:30:48 2010 -0700
38207 altosui: Fix telemetry file reader to handle tick count wrapping
38209 The telemetry reader was ignoring tick count wrapping, so you'd see
38210 time go backwards in jumps. Not useful.
38212 Signed-off-by: Keith Packard <keithp@keithp.com>
38214 commit 96ca7051f60ea299e3e05bafbe5717fc83c3afd2
38215 Author: Bdale Garbee <bdale@gag.com>
38216 Date: Thu Sep 9 22:50:03 2010 -0600
38218 update changelogs for Debian build
38220 commit 2d5e48c5dc0e822fdf430f43804c1e5e79fdbf84
38221 Author: Keith Packard <keithp@keithp.com>
38222 Date: Thu Sep 9 21:28:10 2010 -0700
38224 Add --with-fat-dir configure option to publish finished stand-alone bits
38226 --with-fat-dir specifies a directory to copy the finished
38227 linux/macosx/windows stand-alone ("fat") packages to. A sub-directory
38228 will be created under the specified directory based on the product
38229 version number and the files copied there.
38231 Signed-off-by: Keith Packard <keithp@keithp.com>
38233 commit dd2b77b2a516a055f29191dcdfeb727e637aae86
38234 Author: Keith Packard <keithp@keithp.com>
38235 Date: Thu Sep 9 20:59:29 2010 -0700
38237 altosui: libaltos.so is built with libtool -- it's in ../libaltos/.libs
38239 It used to be in ../libaltos
38241 Signed-off-by: Keith Packard <keithp@keithp.com>
38243 commit 72a5c1258db92d0ddd660bfa875e8e55cab47af7
38244 Author: Keith Packard <keithp@keithp.com>
38245 Date: Thu Sep 9 20:39:41 2010 -0700
38247 altosui: Remove some debug printfs.
38249 Signed-off-by: Keith Packard <keithp@keithp.com>
38251 commit 031fd9a954f2e3447d0150eb4ecc81af7b620dca
38252 Author: Keith Packard <keithp@keithp.com>
38253 Date: Thu Sep 9 20:36:12 2010 -0700
38255 Add firmware and libaltos to 'fat' target at top-level
38257 This ensures that all of the necessary bits are available to construct
38258 the distribution images.
38260 Signed-off-by: Keith Packard <keithp@keithp.com>
38262 commit fcaa480b1dfeb2fd4044f9c4e1b6d50c46fc9984
38263 Author: Bdale Garbee <bdale@gag.com>
38264 Date: Thu Sep 9 21:29:20 2010 -0600
38266 update changelogs for Debian build
38268 commit 48f57997452e17564e28fe3e37403f6f63d32dea
38269 Author: Keith Packard <keithp@keithp.com>
38270 Date: Thu Sep 9 20:24:42 2010 -0700
38272 altosui: conflating USB product and vendor IDs is a bad idea
38274 We've now got a USB vendor ID called 'altusmetrum' for generic
38275 altusmetrum devices (old USB ID 0x000A) while the general vendor name
38276 for all devices is 'altusmetrum' as well.
38278 This patch splits vendors and products into separate name spaces,
38279 products are prefixed with product_ and vendor with (oddly) vendor_.
38281 Signed-off-by: Keith Packard <keithp@keithp.com>
38283 commit 632d276118ab04de67561104be650f8fb69a0450
38284 Author: Bdale Garbee <bdale@gag.com>
38285 Date: Thu Sep 9 20:34:43 2010 -0600
38287 update changelogs for Debian build
38289 commit 1ac3d7e3ba52d1b0dc834eaa5d7886c730eaf307
38290 Author: Bdale Garbee <bdale@gag.com>
38291 Date: Thu Sep 9 20:34:22 2010 -0600
38293 initial cut at an altosui man page
38295 commit 5c4e437975054d33604402591e1ea2f314932593
38296 Author: Bdale Garbee <bdale@gag.com>
38297 Date: Thu Sep 9 20:06:09 2010 -0600
38299 update changelogs for Debian build
38301 commit 0ea75761416bff299233991e961ba25b6c7dcf89
38302 Merge: 35d70c9 8ee3464
38303 Author: Bdale Garbee <bdale@gag.com>
38304 Date: Thu Sep 9 20:05:27 2010 -0600
38306 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
38308 commit 8ee3464d8064ebe1694c7b20177878c0d9961451
38309 Author: Keith Packard <keithp@keithp.com>
38310 Date: Thu Sep 9 17:54:41 2010 -0700
38312 altosui: Display error dialog when AltOS JNI library can't be loaded
38314 Having an error dialog appear at application startup seems better than
38315 simply failing to present the device dialog later on.
38317 Signed-off-by: Keith Packard <keithp@keithp.com>
38319 commit 4224a7526e51eb8fbf1f0a31bae7ee68c6385095
38320 Author: Keith Packard <keithp@keithp.com>
38321 Date: Thu Sep 9 17:52:46 2010 -0700
38323 altosui: Store libaltos.so in $(libdir)/altos
38325 It's not a public library, so hide it away in a subdirectory.
38327 Signed-off-by: Keith Packard <keithp@keithp.com>
38329 commit 1e4c18777d982061f5e507a4d4f4f1cd4d685268
38330 Author: Keith Packard <keithp@keithp.com>
38331 Date: Thu Sep 9 17:49:37 2010 -0700
38333 altosui: Need to have JVM include path substituted into libaltos Makefile
38335 The libaltos Makefile needs to find the relevant jni.h file, which is
38336 found in the JVM_INCLUDE path, all nicely located by the configure.ac script.
38338 Signed-off-by: Keith Packard <keithp@keithp.com>
38340 commit 35d70c92307dd478bc619b2f6c5a88e155cdad28
38341 Author: Bdale Garbee <bdale@gag.com>
38342 Date: Thu Sep 9 17:27:07 2010 -0600
38344 handle versioning of ihx files (poorly) by just wildcarding the file name,
38345 which assumes there's only one matching .. probably ok on Debian?
38347 commit c286ada6457579d64e9d8ca44b927258b4a561da
38348 Author: Bdale Garbee <bdale@gag.com>
38349 Date: Thu Sep 9 16:27:40 2010 -0600
38351 update changelogs for Debian build
38353 commit 6c0ae7e966a81ece35bccbe89d626a58afe899a2
38354 Author: Keith Packard <keithp@keithp.com>
38355 Date: Thu Sep 9 15:25:18 2010 -0700
38357 altosui: remove FATJAR from all-local to avoid building fat .jar file
38359 the fat .jar file is used in non-native builds to run from a directory
38360 containing all of the freetts jar files along with the altosui jar
38361 file. We don't want this on a real install where freetts is installed separately.
38363 Signed-off-by: Keith Packard <keithp@keithp.com>
38365 commit 737a64c57a8f979f51c3fa6b3f214520c736cf8a
38366 Author: Keith Packard <keithp@keithp.com>
38367 Date: Thu Sep 9 15:22:14 2010 -0700
38369 altosui: hack to make JAVAROOT directory get created before javac runs
38371 This ensures that the JAVAROOT directory gets created by adding it to
38372 the variable used to set the CLASSPATH environment value.
38374 Signed-off-by: Keith Packard <keithp@keithp.com>
38376 commit b456bd9d7bcd9d968e43c38eeb6fa6ad8c58f895
38377 Author: Keith Packard <keithp@keithp.com>
38378 Date: Thu Sep 9 15:11:41 2010 -0700
38380 altosui: fix telemetrum.inf FFFE:000A product names on AMD64 and ia64
38382 This appears to matter to Vista. Dunno why.
38384 Signed-off-by: Keith Packard <keithp@keithp.com>
38386 commit 16980b848651a6b20a0b458446f0a19fb517539d
38387 Author: Keith Packard <keithp@keithp.com>
38388 Date: Thu Sep 9 15:10:25 2010 -0700
38390 altosui: Add explicit requirement to create classes directory
38392 The implicit ordering doesn't appear reliable.
38394 Signed-off-by: Keith Packard <keithp@keithp.com>
38396 commit 15da683c2f747baef49c8b8d321a86faede0de30
38397 Author: Bdale Garbee <bdale@gag.com>
38398 Date: Thu Sep 9 15:51:50 2010 -0600
38400 update changelogs for Debian build
38402 commit 012e7176954a6b74b3b667317be0f6dc41d7ab70
38403 Author: Bdale Garbee <bdale@gag.com>
38404 Date: Thu Sep 9 15:51:02 2010 -0600
38406 add libtool to build deps
38408 commit 3e5824b9a71971ce99bfe38a1e860b421e265f02
38409 Author: Bdale Garbee <bdale@gag.com>
38410 Date: Thu Sep 9 15:43:47 2010 -0600
38412 update changelogs for Debian build
38414 commit ddc83b4c401be965a9947782becf20cc8c54e6a2
38415 Merge: afea6c2 3d49d5f
38416 Author: Anthony Towns <aj@erisian.com.au>
38417 Date: Sun Sep 5 20:49:34 2010 +1000
38419 Merge branch 'master' of git://git.gag.com/fw/altos
38421 commit 3d49d5f69b41c27003dbc5ccf1899014bd13bd99
38422 Author: Keith Packard <keithp@keithp.com>
38423 Date: Sun Sep 5 02:05:06 2010 -0700
38425 altosui: ensure that 'altosui' script is installed. Pass arguments along.
38427 Signed-off-by: Keith Packard <keithp@keithp.com>
38429 commit b61fec225ada6a9e252e4c7920101ee18c77cbdc
38430 Author: Keith Packard <keithp@keithp.com>
38431 Date: Sun Sep 5 01:55:56 2010 -0700
38433 altosui: eeprom files place 'boost' time in the flight number record.
38435 Instead of looking for the first state change record, use the Flight
38436 record to get the boost tick.
38438 Signed-off-by: Keith Packard <keithp@keithp.com>
38440 commit 6c653a4cba5fef8d49261cf1c024f3e86e9058c6
38441 Author: Keith Packard <keithp@keithp.com>
38442 Date: Sun Sep 5 01:52:36 2010 -0700
38444 altosui: Record flight number when scanning file, not when running
38446 The very first record in the eeprom is the flight number, but it is
38447 time-stamped with the 'boost' time, and so it gets sorted until much
38448 later, delaying the return of data until the rocket enters boost
38449 mode. This drops all of the nice pad GPS and state date on the floor.
38451 Signed-off-by: Keith Packard <keithp@keithp.com>
38453 commit 38e1d87c8d449866faac026577fefa9a118428cb
38454 Author: Keith Packard <keithp@keithp.com>
38455 Date: Sun Sep 5 01:23:53 2010 -0700
38457 altosui: Use local .class files in the classpath
38459 This ensures that compiling only a few changed files will
38460 locate the old .class files instead of using a stale .jar file.
38462 commit 9941b05a1d03dafd6cd899b5fe999ed769efb1d6
38463 Author: Keith Packard <keithp@keithp.com>
38464 Date: Sun Sep 5 01:21:14 2010 -0700
38466 altosui: Prevent voice altitude data from queueing up
38468 When flight status changes rapidly, the queue of voice data can get
38469 quite long. This change does two things -- first, it remembers when
38470 the altitude reporting happens due to flight events and delays the
38471 periodic reporting until a suitable time after that, second it ensures
38472 that the voice data has all been delivered before generating a new
38475 Signed-off-by: Keith Packard <keithp@keithp.com>
38477 commit 4dec5c36702d76dc95beada7c1d3222a638a2cbb
38478 Author: Keith Packard <keithp@keithp.com>
38479 Date: Sun Sep 5 01:19:11 2010 -0700
38481 altosui: Add AltosVoice.drain() to wait for queued speech to finish
38483 drain() blocks until all pending phrases have been processed, allowing
38484 the UI code to avoid pending data that will end up stale by the time
38487 Signed-off-by: Keith Packard <keithp@keithp.com>
38489 commit 410ba89eef9c9817eef81b702966cb88820ff7c4
38490 Author: Keith Packard <keithp@keithp.com>
38491 Date: Sun Sep 5 01:13:01 2010 -0700
38493 altosui: Start idle thread after the rocket leaves the pad
38495 This makes the first altitude report time consistently 10 seconds
38496 after launch, instead of some random time depending on when the rocket
38497 launched relative to the time the device connection was made.
38499 Signed-off-by: Keith Packard <keithp@keithp.com>
38501 commit 6205547ec7191aab0259a8449520e966a96129e6
38502 Author: Keith Packard <keithp@keithp.com>
38503 Date: Sun Sep 5 01:08:50 2010 -0700
38505 altosui: When replay thread is interrupted, don't make final report
38507 Normally, the replay process makes one final report after the file has
38508 been parsed. However, if the reading process is interrupted to display
38509 something else, this report is just annoying, so don't make it.
38511 Signed-off-by: Keith Packard <keithp@keithp.com>
38513 commit 3d99584fcfe43b22e8581874e0ac77ce3d635d48
38514 Author: Keith Packard <keithp@keithp.com>
38515 Date: Sun Sep 5 01:03:18 2010 -0700
38517 altosui: Add elevation and range data to main display
38519 Reported by voice, it's useful to see these on the display as well.
38521 Signed-off-by: Keith Packard <keithp@keithp.com>
38523 commit 2d58f319a7c1a6a8ccc6a539722009996ba886ab
38524 Author: Keith Packard <keithp@keithp.com>
38525 Date: Sun Sep 5 01:01:10 2010 -0700
38527 altosui: Eeprom files contain only one date; save it.
38529 While reading eeprom files, the GPS record is reconstructed each time
38530 the system sees the first GPS log item (the time field), but as the
38531 date isn't repeated, we need to copy it from the old GPS data record.
38533 Signed-off-by: Keith Packard <keithp@keithp.com>
38535 commit b2aa689bf3d61e4a3ebe7c828162d1be20aad0f6
38536 Author: Keith Packard <keithp@keithp.com>
38537 Date: Sun Sep 5 00:59:54 2010 -0700
38539 altosui: Remove debugging printf from AltosEepromReader
38541 These were in place while validing the GPS data reconstruction code
38542 that handles eeprom files missing the first GPS date line due to the
38543 record overwriting bug in old firmware versions.
38545 Signed-off-by: Keith Packard <keithp@keithp.com>
38547 commit eb0e7a59f0806734a4c959a3ce7c57f71cbe3986
38548 Author: Keith Packard <keithp@keithp.com>
38549 Date: Sun Sep 5 00:57:38 2010 -0700
38551 altosui: Return AO_LOG_INVALID instead of exception for eeprom files
38553 When an eeprom file contains an invalid line, just return
38554 AO_LOG_INVALID instead of throwing an exception. This allows us to
38555 replay and parse files with extraneous serial communication.
38557 Signed-off-by: Keith Packard <keithp@keithp.com>
38559 commit c3a17c71a45207dd715d537704f161de9219f0d7
38560 Author: Keith Packard <keithp@keithp.com>
38561 Date: Sat Sep 4 18:49:22 2010 -0700
38563 altosui: Fix linux fat distribution
38565 Again, use 'cp -p' instead of 'cp -a' to get files into the archive
38566 instead of links. Also, make the shell script 'altosui' instead of
38569 Signed-off-by: Keith Packard <keithp@keithp.com>
38571 commit 828e9e4c68e3ac90b6ba2e9fd5f131a9975f7e4a
38572 Author: Keith Packard <keithp@keithp.com>
38573 Date: Sat Sep 4 18:39:58 2010 -0700
38575 altosui: Fix up Mac OSX .zip file
38577 Must contain 'altosui.jar' instead of altosui-fat.jar.
38578 Also, was using 'cp -a' instead of 'cp -p' which made files
38579 represented by symlinks not end up in the archive.
38581 Signed-off-by: Keith Packard <keithp@keithp.com>
38583 commit 044fd27449c70474f51b99dec25fd23d3c03a559
38584 Author: Keith Packard <keithp@keithp.com>
38585 Date: Sat Sep 4 18:20:45 2010 -0700
38587 altosui: Fix windows installer to ship correct files
38589 Was shipping altosui.jar instead of altosui-fat.jar
38591 Signed-off-by: Keith Packard <keithp@keithp.com>
38593 commit 148b927c3b8bc7b7b5c5356392032faf2b1203d3
38594 Author: Keith Packard <keithp@keithp.com>
38595 Date: Sat Sep 4 18:04:04 2010 -0700
38597 Add top-level 'fat' target to aid building distribution files
38599 Signed-off-by: Keith Packard <keithp@keithp.com>
38601 commit aed59e1c057c13e28fd368dc2592aa4628211097
38602 Author: Keith Packard <keithp@keithp.com>
38603 Date: Sat Sep 4 17:59:11 2010 -0700
38605 Add version numbers to released files. Set version to 0.7.1
38607 Instead of using git revision counts for version numbers, use explicit
38608 versions numbers configured in the configure.ac file. Expose published
38609 files with version numbers.
38611 Signed-off-by: Keith Packard <keithp@keithp.com>
38613 commit 2808bba3efa1cff133cc060dabff06fab8b75388
38614 Author: Keith Packard <keithp@keithp.com>
38615 Date: Sat Sep 4 17:58:52 2010 -0700
38617 Ignore libtool files.
38619 commit bc183400ab93d5902c52851319999cc77f27bc81
38620 Author: Keith Packard <keithp@keithp.com>
38621 Date: Sat Sep 4 17:35:17 2010 -0700
38623 altos: add some SDCDB config files
38625 commit 887b11f6b9c81b9f15348d54017e700ca7dc5e55
38626 Author: Keith Packard <keithp@keithp.com>
38627 Date: Sat Sep 4 17:27:17 2010 -0700
38629 Use autotools for altosui and libaltos
38631 This switches from hand-written Makefiles to automake with libtool
38632 for these parts of the system.
38634 Signed-off-by: Keith Packard <keithp@keithp.com>
38636 commit e844e8a0695e27af6f8e3e37a5e3bcc865b862e3
38637 Author: Keith Packard <keithp@keithp.com>
38638 Date: Sat Sep 4 01:13:42 2010 -0700
38640 altosui: Add icons to application and Windows menus.
38642 Use the altus-metrum icon for an application icon and a windows start
38645 Signed-off-by: Keith Packard <keithp@keithp.com>
38647 commit e9ea28504c646fc25791aab09b9e5faf73e0ac0c
38648 Author: Keith Packard <keithp@keithp.com>
38649 Date: Sat Sep 4 01:08:34 2010 -0700
38651 icon: add some icons for application programs
38653 altus-metrum.ico: Windows ICO file
38654 altus-metrum-16x16.jpg: 16x16 jpg image for java
38656 Signed-off-by: Keith Packard <keithp@keithp.com>
38658 commit f550677df016070430ed38bfa2b2be33f1b8c40a
38659 Author: Keith Packard <keithp@keithp.com>
38660 Date: Sat Sep 4 00:16:41 2010 -0700
38662 altosui: oops. renamed the nsis file to altos-windows.nsi
38664 And forgot to change the dependency in the Makefile
38666 Signed-off-by: Keith Packard <keithp@keithp.com>
38668 commit c0988ddbf104ea729090c2e7e2a28cc6dc9e90f6
38669 Author: Keith Packard <keithp@keithp.com>
38670 Date: Sat Sep 4 00:14:15 2010 -0700
38672 altosui: ignore built files
38674 commit ecb4a09535b6a8da0765010489a96e605dbdeb46
38675 Author: Keith Packard <keithp@keithp.com>
38676 Date: Sat Sep 4 00:13:11 2010 -0700
38678 altosui: Add windows installer build using 'nsis'
38680 nsis happens to be packaged in debian, and it appears to build usable
38681 installers, which is all very cool.
38683 Signed-off-by: Keith Packard <keithp@keithp.com>
38685 commit bf22923cd8b4f6f954718358b411b5b10d8e7b4d
38686 Author: Bdale Garbee <bdale@gag.com>
38687 Date: Sat Sep 4 00:46:29 2010 -0400
38689 update changelogs for Debian build
38691 commit 59798c6fd11502a9c8b66090c23ba50eb250692e
38692 Author: Keith Packard <keithp@keithp.com>
38693 Date: Fri Sep 3 12:43:45 2010 -0700
38695 altosui: Catch I/O errors on telemetry device, report to user
38697 This catches the USB device being unplugged and makes sure the
38698 user sees an error dialog in this case.
38700 Signed-off-by: Keith Packard <keithp@keithp.com>
38702 commit 16d8d6a8853d09f683b13f9cda3c3174a0aab130
38703 Author: Keith Packard <keithp@keithp.com>
38704 Date: Fri Sep 3 12:31:05 2010 -0700
38706 altosui: Must flush serial line after configuring for telemetry
38708 Without flushing the configuration commands to the serial device, it
38709 never sees them as the telemetry input thread doesn't flush.
38711 Signed-off-by: Keith Packard <keithp@keithp.com>
38713 commit d4f64e95e31e2335470efc15df2ab357b7d197f3
38714 Author: Keith Packard <keithp@keithp.com>
38715 Date: Fri Sep 3 11:48:55 2010 -0700
38717 Revert "altosui: Deal with altos bug setting radio channel while monitoring"
38719 This reverts commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f.
38721 Testing the old code
38723 commit 71191ecef3ba0e00d0f8a7cd1a24982bfa44ec72
38724 Author: Keith Packard <keithp@keithp.com>
38725 Date: Fri Sep 3 01:30:33 2010 -0700
38727 altosui: Allow 'connect to device' when already connected
38729 Opening another serial device involves shutting down the display
38730 thread (to reset its state) and spawning another one. Shutting down
38731 the display thread normally closes the serial device as a part of the
38732 process, and if this isn't done before the new serial device is
38733 opened, then the new serial device ends up getting closed too.
38735 Interrupting the display thread and waiting for it to stop before
38736 opening the new serial device solves the problem.
38738 Signed-off-by: Keith Packard <keithp@keithp.com>
38740 commit ba65e4aeb952a1cf49a77f1e24e235508fcea71f
38741 Author: Keith Packard <keithp@keithp.com>
38742 Date: Fri Sep 3 01:21:57 2010 -0700
38744 altosui: Deal with altos bug setting radio channel while monitoring
38746 If the monitoring thread is active, then setting the radio channel can
38747 sometimes cause the monitoring thread to get stuck. I'm not entirely
38748 sure why though. For now, work around the issue by making sure
38749 monitoring is off, and the monitoring thread has stopped, before
38750 changing the radio channel.
38752 Signed-off-by: Keith Packard <keithp@keithp.com>
38754 commit e5ef42c2b22c6639d90631dbbb588f9fd2494385
38755 Author: Keith Packard <keithp@keithp.com>
38756 Date: Fri Sep 3 01:12:24 2010 -0700
38758 altosui: Report telemetry CRC errors in UI
38760 Telemetry CRC errors can signal problems with TeleMetrum or TeleDongle
38761 units, so report them in the UI.
38763 Signed-off-by: Keith Packard <keithp@keithp.com>
38765 commit 3b3aa448f3a0f44137f7530b04b58967ba5f22f5
38766 Author: Keith Packard <keithp@keithp.com>
38767 Date: Thu Sep 2 21:11:29 2010 -0700
38769 altosui: build Mac OS .zip file to include paths
38771 Without the paths, the OS X zip file doesn't create a usable
38772 application structure.
38774 Signed-off-by: Keith Packard <keithp@keithp.com>
38776 commit cff0d1ef6b338b3d5ad9450d4d5f95df934cb5e4
38777 Author: Keith Packard <keithp@keithp.com>
38778 Date: Wed Sep 1 22:56:34 2010 -0700
38780 altosui: Post error dialog on invalid ROM config values.
38782 Signed-off-by: Keith Packard <keithp@keithp.com>
38784 commit 8d8980f56a4f2c7d6f2ce667130706e0f04f8ded
38785 Author: Keith Packard <keithp@keithp.com>
38786 Date: Wed Sep 1 22:56:12 2010 -0700
38788 altosui: Remove some debug printfs from AltosRomconfig class
38790 Signed-off-by: Keith Packard <keithp@keithp.com>
38792 commit 5ee6cd41ed189c3166f76558ecada80917f40652
38793 Author: Keith Packard <keithp@keithp.com>
38794 Date: Wed Sep 1 22:47:15 2010 -0700
38796 altosui: Hide internal rom config UI helper function
38798 This was getting mis-used by the flash UI causing the rom dialog
38799 'cancel' button to work just like 'ok'.
38801 Signed-off-by: Keith Packard <keithp@keithp.com>
38803 commit 9a690c9795e8257d2a3225f905117681668a472f
38804 Author: Keith Packard <keithp@keithp.com>
38805 Date: Wed Sep 1 22:46:04 2010 -0700
38807 altosui: allow flashing to be canceled from the rom config dialog
38809 Was using the rom config class wrong, causing cancel actions to work
38810 just like 'ok' actions. Oops.
38812 Signed-off-by: Keith Packard <keithp@keithp.com>
38814 commit 2f07ad14a16dbf1b75c71784ceae303825c90ade
38815 Author: Keith Packard <keithp@keithp.com>
38816 Date: Wed Sep 1 22:43:22 2010 -0700
38818 altosui: Abort flashing if debug port isn't working
38820 Check each command going over the debug port and make sure it works as
38821 expected. This commit adds checks for initializing the clock,
38822 selecting the desired program counter and running the flash
38825 Signed-off-by: Keith Packard <keithp@keithp.com>
38827 commit cf30343aadd5039627a85319872685f743e64b16
38828 Author: Bdale Garbee <bdale@gag.com>
38829 Date: Thu Sep 2 00:55:41 2010 -0400
38831 update changelogs for Debian build
38833 commit 59a40f6d5a2159b9009a3fa0737bb679efd5b32c
38834 Author: Bdale Garbee <bdale@gag.com>
38835 Date: Thu Sep 2 00:55:01 2010 -0400
38837 another distclean fix
38839 commit 59ff9180f11063c257746b895a167179b3a4ff7c
38840 Author: Bdale Garbee <bdale@gag.com>
38841 Date: Thu Sep 2 00:53:16 2010 -0400
38843 and a few more distclean fixes
38845 commit 3aafd70257b70b7c11ba9c55749157979bc61ea2
38846 Author: Bdale Garbee <bdale@gag.com>
38847 Date: Thu Sep 2 00:52:04 2010 -0400
38849 more makefile distclean target work
38851 commit d5a6ad87c7a9ac03b2e694bed0a54b6cc4322a6f
38852 Author: Bdale Garbee <bdale@gag.com>
38853 Date: Thu Sep 2 00:50:16 2010 -0400
38855 update changelogs for Debian build
38857 commit 14fa24ed93b3b1cec08a170004c6fb7f4d74f7e5
38858 Author: Bdale Garbee <bdale@gag.com>
38859 Date: Thu Sep 2 00:48:31 2010 -0400
38861 update changelogs for Debian build
38863 commit 83552dfa0d38db9cdf3efc89e64e6c7896467856
38864 Author: Bdale Garbee <bdale@gag.com>
38865 Date: Thu Sep 2 00:47:54 2010 -0400
38867 add distclean targets to libaltos and altosui to all Debian package to build
38869 commit 6f24d2a476759104a10b26b54faff2b18b0e208b
38870 Author: Bdale Garbee <bdale@gag.com>
38871 Date: Thu Sep 2 00:46:21 2010 -0400
38873 update changelogs for Debian build
38875 commit d079bfe86ed40ff450ece445cf5f5e3970e44cec
38876 Author: Bdale Garbee <bdale@gag.com>
38877 Date: Thu Sep 2 00:44:30 2010 -0400
38879 update changelogs for Debian build
38881 commit a470315e5d822a69ef5304512cf73c604c88e481
38882 Author: Keith Packard <keithp@keithp.com>
38883 Date: Wed Sep 1 20:14:51 2010 -0700
38885 altosui: Remove Manifest.txt from git repo as it's built now
38887 This file is built with appropriate contents for each different .jar file.
38889 Signed-off-by: Keith Packard <keithp@keithp.com>
38891 commit 1177e0a684328422be5adc68093d0091a218a824
38892 Author: Keith Packard <keithp@keithp.com>
38893 Date: Wed Sep 1 19:53:24 2010 -0700
38895 altos: Bounds check Skytraq GPS tracking data array
38897 Missing GPS serial data could cause the tracking array reset to
38898 get skipped, causing the array to be overrun, smashing critical data
38901 This was detected using the 'altosui' flash command to program a
38902 device from TM. Hitting the USB that hard caused TM to crash with a
38903 mutex error (3 beeps) after the ao_gps_task structure was overwritten
38906 Signed-off-by: Keith Packard <keithp@keithp.com>
38908 commit 775acb89660cdee2f3c54c38297baefe39f2414c
38909 Author: Keith Packard <keithp@keithp.com>
38910 Date: Mon Aug 30 22:24:09 2010 -0700
38912 altosui: missed AltosReader.class in the Makefile
38914 This caused clean builds to fail to make this file
38916 Signed-off-by: Keith Packard <keithp@keithp.com>
38918 commit bd2b9d958c2b7f846031b076ed51c4fbaaf2d68f
38919 Author: Bdale Garbee <bdale@gag.com>
38920 Date: Tue Aug 31 00:20:06 2010 -0400
38922 update changelogs for Debian build
38924 commit d006c5e1255433181aca4c8e6a277b2d1bc0841b
38925 Author: Bdale Garbee <bdale@gag.com>
38926 Date: Tue Aug 31 00:19:37 2010 -0400
38928 add runtime dependencies for altos binary package
38930 commit c1c7d731e3774883fa0bb5538be225a59334d124
38931 Author: Bdale Garbee <bdale@gag.com>
38932 Date: Mon Aug 30 19:52:51 2010 -0600
38934 update changelogs for Debian build
38936 commit c35632efb1919764e4b8581ed6fcf2bedd4bd517
38937 Author: Bdale Garbee <bdale@gag.com>
38938 Date: Mon Aug 30 19:37:50 2010 -0600
38940 update changelogs for Debian build
38942 commit 2a004d17a13b4ff52d892bfdecff8ad3d0823f7c
38943 Author: Bdale Garbee <bdale@gag.com>
38944 Date: Mon Aug 30 19:37:17 2010 -0600
38946 don't build all the "fat" jar deliverables by default
38948 commit 507e429db6638f82c32449e9c5ca06b46da30134
38949 Author: Bdale Garbee <bdale@gag.com>
38950 Date: Mon Aug 30 19:09:00 2010 -0600
38952 update changelogs for Debian build
38954 commit 25764fcd1b65c3a5a817afdb5901ac30e8a5f0c0
38955 Author: Bdale Garbee <bdale@gag.com>
38956 Date: Mon Aug 30 19:08:29 2010 -0600
38958 update changelogs for Debian build
38960 commit 4790f78aead8a816e5b247c022b2998ce3a94053
38961 Author: Bdale Garbee <bdale@gag.com>
38962 Date: Mon Aug 30 18:48:50 2010 -0600
38964 add a .gitattributes file, configuring the Mac and Windows binary library
38965 files with the export-ignore attribute, in hopes that this will prevent
38966 them showing up in source packages
38968 commit 81318e5b7179b0311ab099043ecb04a25d763750
38969 Author: Bdale Garbee <bdale@gag.com>
38970 Date: Mon Aug 30 18:15:40 2010 -0600
38972 make invocation of 'install' pathless to work on more Unix variants
38974 commit cbc72399a0f4d7429df0189bcdae683dd491cb9e
38975 Author: Bdale Garbee <bdale@gag.com>
38976 Date: Mon Aug 30 17:56:56 2010 -0600
38978 continue even if rm's don't have anything to do
38980 commit a9a8d23c877e6f6c76857b7c85e3d43b4da1db27
38981 Author: Keith Packard <keithp@keithp.com>
38982 Date: Mon Aug 30 05:49:11 2010 -0700
38984 altosui: Devices with USB id 0x000a always get listed
38986 List 'unknown' AltusMetrum devices anytime the UI needs a device
38989 Signed-off-by: Keith Packard <keithp@keithp.com>
38991 commit a94900b8862b99b4e317ea0ee3edd2a560f270c7
38992 Author: Keith Packard <keithp@keithp.com>
38993 Date: Mon Aug 30 05:48:23 2010 -0700
38995 altosui: build debian-style altosui too
38997 This adds the dependencies to make sure altosui and altosui.jar get built.
38999 Signed-off-by: Keith Packard <keithp@keithp.com>
39001 commit 38ac388baf8125c0644b868a7aaf8eba1bdf990d
39002 Author: Keith Packard <keithp@keithp.com>
39003 Date: Mon Aug 30 05:28:37 2010 -0700
39005 altosui: Build linux, mac and windows archives on Linux
39007 This adds 'fat' archives for each target OS.
39009 Signed-off-by: Keith Packard <keithp@keithp.com>
39011 commit 35d9a8214252dbe79aeb69ae47d2e5c58a654702
39012 Author: Keith Packard <keithp@keithp.com>
39013 Date: Mon Aug 30 05:27:45 2010 -0700
39015 libaltos: Use overlapped I/O on windows
39017 Otherwise, reads block writes and vice-versa. Crazy stuff.
39019 Signed-off-by: Keith Packard <keithp@keithp.com>
39021 commit c7ba92317ac55272acbde12416448ebd17b983a6
39022 Author: Keith Packard <keithp@keithp.com>
39023 Date: Mon Aug 30 04:52:00 2010 -0700
39025 altos: Windows sends USB Out packets of 0 length. Ack them.
39027 This was an untested case as no other operating system sents 0-length
39028 out packets (they're not necessary). The correct response is to ACK
39029 them by clearing the OUTPKT_RDY bit so that another packet can be sent.
39031 Signed-off-by: Keith Packard <keithp@keithp.com>
39033 commit 20a472cfe3369200150ea4ff067ceb28968dbcac
39034 Author: Keith Packard <keithp@keithp.com>
39035 Date: Mon Aug 30 02:58:23 2010 -0700
39037 libaltos: Add pre-built Windows .dll
39039 This lets us create the windows distribution on Linux.
39041 Signed-off-by: Keith Packard <keithp@keithp.com>
39043 commit 0300fe581c949232bc52b05fe9c1f6032cad6b60
39044 Author: Keith Packard <keithp@keithp.com>
39045 Date: Mon Aug 30 02:56:25 2010 -0700
39047 libaltos: Add pre-built Mac OS X libaltos.dylib
39049 This allows the mac bits to be built on Linux.
39051 Signed-off-by: Keith Packard <keithp@keithp.com>
39053 commit 5d48c494325524bbeed10e0dc7300ed44e7e208e
39054 Author: Keith Packard <keithp@keithp.com>
39055 Date: Mon Aug 30 02:53:26 2010 -0700
39057 Update telemetrum.inf to include all current USB ids.
39059 Windows 7 has 'encouraged' us to split out each product into a
39060 separate USB ID. telemetrum.inf now has all of them listed.
39062 Signed-off-by: Keith Packard <keithp@keithp.com>
39064 commit df34bbe7d1c43b12ab6d610fe810b6e1683e4c21
39065 Author: Keith Packard <keithp@keithp.com>
39066 Date: Mon Aug 30 02:49:49 2010 -0700
39068 libaltos: Improve Makefile
39070 Builds Windows .dll correctly now and sample app.
39071 Moves linux install target to end so it is not default
39072 Adds .NOTPARALLEL to disable parallel gnumake.
39073 Removes -g debugging flags to shrink file size.
39075 Signed-off-by: Keith Packard <keithp@keithp.com>
39077 commit dd5374b8e660012ae4f8b058454fd101e0749ca7
39078 Author: Keith Packard <keithp@keithp.com>
39079 Date: Mon Aug 30 02:00:30 2010 -0700
39081 libaltos: Fix windows build.
39083 Need stdlib.h to get calloc/free defined, remove debug printfs, fix
39086 Signed-off-by: Keith Packard <keithp@keithp.com>
39088 commit 63c832394a829f41b8f77d075786530536360349
39089 Author: Keith Packard <keithp@keithp.com>
39090 Date: Sun Aug 29 23:22:27 2010 -0700
39092 altos: shut down packet mode cleanly
39094 Instead of constantly bashing the packet master thread, let it shut
39095 itself down in an orderly fashion. It will shut down fairly quickly as
39096 all of the activities in that thread are bounded. Otherwise, the
39097 master packet thread might leave mutexes locked and all sorts of other
39100 Tested on Linux and Mac OS X and shown to be reliable.
39102 Signed-off-by: Keith Packard <keithp@keithp.com>
39104 commit 43619c13f749b79c096d1e8fdab3d5cfb5fd85f1
39105 Author: Keith Packard <keithp@keithp.com>
39106 Date: Sun Aug 29 22:42:23 2010 -0700
39108 altos: Abort radio harder when terminating packet mode.
39110 Make sure the master radio tasks don't get stuck waiting for an
39111 incoming packet again by aborting the radio each time we poke the
39114 Signed-off-by: Keith Packard <keithp@keithp.com>
39116 commit c4a8569f61eddf690d00337543462235ecbfbe54
39117 Author: Keith Packard <keithp@keithp.com>
39118 Date: Sun Aug 29 22:41:18 2010 -0700
39120 altos: flush pending output when terminating packet mode
39122 Just in case the last command sent hasn't been transmitted, hang
39123 around for up to a second waiting for the data to get across the link.
39125 Signed-off-by: Keith Packard <keithp@keithp.com>
39127 commit 1acd3c7ec167b1b18e4ea493e5978c938a91cc89
39128 Author: Keith Packard <keithp@keithp.com>
39129 Date: Sun Aug 29 21:45:19 2010 -0700
39131 libaltos: cjnitest needs altos_flush now
39133 commit 6527357d1f0e94faf9e7dacac10a39875131be7c
39134 Author: Keith Packard <keithp@keithp.com>
39135 Date: Sun Aug 29 21:43:46 2010 -0700
39137 libaltos: Missing OS_LDFLAGS on cjnitest build
39139 commit b7fa1ea3338f63b8edcf8aacccb5e519ca0b213f
39140 Author: Keith Packard <keithp@keithp.com>
39141 Date: Sun Aug 29 21:41:40 2010 -0700
39143 libaltos: Mac OS X cannot use 'poll(2)' on serial lines.
39145 Who ships this stuff, anyway? Instead of blocking, we'll poll every 100ms now,
39146 otherwise, we won't be able to abort the read when the device is closed. Yay!
39148 Signed-off-by: Keith Packard <keithp@keithp.com>
39150 commit e60c59123232915e808cee23ef89eb1a38ced34b
39151 Author: Keith Packard <keithp@keithp.com>
39152 Date: Sun Aug 29 21:40:21 2010 -0700
39154 altosui: discard invalid lines while reading Eeprom flight data
39156 This shouldn't happen, but it's easy enough to get back in sync by just
39157 skipping lines with weird contents.
39159 Signed-off-by: Keith Packard <keithp@keithp.com>
39161 commit ae02b1590439d5c8dfb472cf1f83a14fdcfbaf11
39162 Author: Keith Packard <keithp@keithp.com>
39163 Date: Sun Aug 29 21:36:47 2010 -0700
39165 altosui: provide separate flush_input/flush_output for serial. deal with monitor automatically
39167 (yes, this should be two patches, but the diffs in AltosSerial were merged together).
39169 First, this replaces the existing flush/flush_reply mess with two simple functions,
39170 one to flush output to the serial device, making sure that all data written will be seen
39171 while we wait for input. The other sucks any pending input off of the serial line and
39174 Second, AltosSerial now tracks whether the serial line is being used for telemetry
39175 monitoring. If so, it enables monitoring, otherwise it disables it. Eliminates a
39176 bunch of manual state tracking elsewhere.
39178 Signed-off-by: Keith Packard <keithp@keithp.com>
39180 commit edcfb1bdf64772d3b83405ccf99385b8fea5d8e4
39181 Author: Keith Packard <keithp@keithp.com>
39182 Date: Sun Aug 29 17:33:59 2010 -0700
39184 libaltos: AltusMetrum devices use more than one USB ID.
39186 List all usb devices, picking those with AltusMetrum IDs.
39188 Signed-off-by: Keith Packard <keithp@keithp.com>
39190 commit 236685807b63860ad033aa0254ce8f6d8d36d4ef
39191 Author: Bdale Garbee <bdale@gag.com>
39192 Date: Fri Aug 27 22:26:09 2010 -0600
39194 update changelogs for Debian build
39196 commit 1cda15fdef2d9d3e54354bd5c43a0bcc7e3240cb
39197 Author: Bdale Garbee <bdale@gag.com>
39198 Date: Fri Aug 27 22:24:51 2010 -0600
39200 fix up for an 0.7 release
39202 commit 4c5c7c7f198775c398c1ad2edafb3488384cc297
39203 Author: Bdale Garbee <bdale@gag.com>
39204 Date: Fri Aug 27 22:13:38 2010 -0600
39206 update changelogs for Debian build
39208 commit 42055af5c6f17d14a2f1c6a2b5e1ce6d3b45a615
39209 Author: Bdale Garbee <bdale@gag.com>
39210 Date: Fri Aug 27 13:13:19 2010 -0600
39212 update changelogs for Debian build
39214 commit 0bd4cc03b3bf23aa32b5ce1921078021d1d8a9c6
39215 Author: Bdale Garbee <bdale@gag.com>
39216 Date: Fri Aug 27 13:12:46 2010 -0600
39218 fix path to installed shared library
39220 commit 99c1d9b4ef10ec4ebbee058ce0bb38c954a0a3a6
39221 Author: Bdale Garbee <bdale@gag.com>
39222 Date: Fri Aug 27 12:41:26 2010 -0600
39224 update changelogs for Debian build
39226 commit cf65c6b8056c4af7c26b52ec6f9fbd3400cef638
39227 Merge: 5f2f6a8 ae5eff7
39228 Author: Bdale Garbee <bdale@gag.com>
39229 Date: Fri Aug 27 12:38:25 2010 -0600
39231 Merge branch 'bdale'
39236 commit ae5eff7bc0b63047737223423009707bedcb00f5
39237 Author: Bdale Garbee <bdale@gag.com>
39238 Date: Fri Aug 27 12:37:36 2010 -0600
39240 Revert "lose the prebuild hook for now while I'm fumbling"
39242 This reverts commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf.
39244 commit de2e71c4923a0282df74dbe37d087c34b4ddd279
39245 Author: Bdale Garbee <bdale@gag.com>
39246 Date: Fri Aug 27 12:25:20 2010 -0600
39248 fix man page delivery path
39250 commit a8dbe082960dc9bdd44c6e4b1198423c4e566029
39251 Author: Bdale Garbee <bdale@gag.com>
39252 Date: Fri Aug 27 12:18:28 2010 -0600
39254 install altosui man page
39256 commit 5cc933039e4763b8675611c63b6147b42878a2bb
39257 Author: Bdale Garbee <bdale@gag.com>
39258 Date: Fri Aug 27 12:16:19 2010 -0600
39260 fix permissions on installed jar file, switch from ao-view to altosui in
39263 commit 138009e9fad01f79df4c3820fbc206f78688bdce
39264 Author: Bdale Garbee <bdale@gag.com>
39265 Date: Fri Aug 27 12:06:01 2010 -0600
39267 update Debian standards version
39269 commit c280071b7db4e9a7af31dc5740eb8d27f137950e
39270 Author: Bdale Garbee <bdale@gag.com>
39271 Date: Fri Aug 27 12:04:13 2010 -0600
39273 fix up the wrapper's path to the jar file
39275 commit 5f2f6a8f9ba56be867888758848bc7f152ccbd47
39276 Merge: 63bd34c 9d1b27f
39277 Author: Keith Packard <keithp@keithp.com>
39278 Date: Fri Aug 27 11:00:31 2010 -0700
39280 Merge remote branch 'origin/master' into new-packet-format
39282 commit 63bd34cd1b5a411489e8c3ab377f0fe0eec11f67
39283 Author: Keith Packard <keithp@keithp.com>
39284 Date: Fri Aug 27 10:58:55 2010 -0700
39286 altosui: add elevation and range information
39288 Signed-off-by: Keith Packard <keithp@keithp.com>
39290 commit 72a18502e40f55cbba6418dc94315517881cd411
39291 Author: Bdale Garbee <bdale@gag.com>
39292 Date: Fri Aug 27 11:51:24 2010 -0600
39294 add an install target for altosui
39296 commit 72c33a72ee105ec692dad62d6d9c1ad40b89bfe8
39297 Author: Bdale Garbee <bdale@gag.com>
39298 Date: Fri Aug 27 11:45:19 2010 -0600
39300 add install target for libaltos
39302 commit a21b6bb60ac1c07ebd161534a4ea63bfde50dcdf
39303 Author: Bdale Garbee <bdale@gag.com>
39304 Date: Fri Aug 27 11:26:29 2010 -0600
39306 lose the prebuild hook for now while I'm fumbling
39308 commit 9ea94411c9730f7a271366d309ab4827beeeb839
39309 Author: Bdale Garbee <bdale@gag.com>
39310 Date: Fri Aug 27 11:17:54 2010 -0600
39312 add a dummy install target
39314 commit c443f43f8dee6e0fcbcecf9d09e948fd928b7af4
39315 Merge: 2950431 2923cf5
39316 Author: Bdale Garbee <bdale@gag.com>
39317 Date: Fri Aug 27 03:08:53 2010 -0600
39319 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
39321 commit 2923cf5057f9cef110dd547d8677ea5b60e00796
39322 Author: Keith Packard <keithp@keithp.com>
39323 Date: Fri Aug 27 00:10:29 2010 -0700
39325 altos: prepare for sdcc 2.9.1
39327 A few minor language changes -- non-standard keywords are now prefixed
39328 with __, such as 'at', 'interrupt', 'naked'.
39330 Signed-off-by: Keith Packard <keithp@keithp.com>
39332 commit 68967157cee620ebedcc8c2ffd6fc7656532087b
39333 Author: Keith Packard <keithp@keithp.com>
39334 Date: Thu Aug 26 23:55:44 2010 -0700
39336 altosui: command line args are converted to csv format
39338 Signed-off-by: Keith Packard <keithp@keithp.com>
39340 commit 7e0506dc2014b7178f52b950e8c1cb820b35f9c6
39341 Author: Keith Packard <keithp@keithp.com>
39342 Date: Thu Aug 26 23:54:53 2010 -0700
39344 altosui: Remove debug printf from AltosState.java
39346 Signed-off-by: Keith Packard <keithp@keithp.com>
39348 commit 49364608b59de7421ab00d87d2685bc3b5f58411
39349 Author: Keith Packard <keithp@keithp.com>
39350 Date: Thu Aug 26 23:53:06 2010 -0700
39352 altosui: When parsing saved telem files, errors shouldn't abort file
39354 Make syntax errors in telem files just skip the current line and move
39355 on to the next one instead of abandoning the whole file.
39357 Signed-off-by: Keith Packard <keithp@keithp.com>
39359 commit a16db143fc7ca72dc91e7989420049192114642d
39360 Author: Keith Packard <keithp@keithp.com>
39361 Date: Thu Aug 26 23:50:51 2010 -0700
39363 altosui: Serial line is in UTF-8 encoding. Deal with it.
39365 We read bytes from the serial line and need to convert each line into
39366 a string. So, save the bytes and at EOL, pass the whole mess to the
39367 string constructor with the appropriate encoding info.
39369 Signed-off-by: Keith Packard <keithp@keithp.com>
39371 commit 0942912163255523d923140c01afbdb5da1c19b5
39372 Author: Keith Packard <keithp@keithp.com>
39373 Date: Thu Aug 26 23:49:37 2010 -0700
39375 altosui: Add support for old (version < 3) telemetry files
39377 This lets the code read telemetry files from pre-released versions of
39378 the software. Not strictly necessary for production, but useful for
39379 analysing old files.
39381 Signed-off-by: Keith Packard <keithp@keithp.com>
39383 commit e383595cd281687de903fb6176564bbef270cb83
39384 Author: Keith Packard <keithp@keithp.com>
39385 Date: Thu Aug 26 23:47:38 2010 -0700
39387 altosui: AltosEepromReader was mis-setting boost tick
39389 It was supposed to use record.tick instead of the (unset) state.tick
39392 Signed-off-by: Keith Packard <keithp@keithp.com>
39394 commit 651f6102ac79459fc8d5679d852c963dcb5bb3fc
39395 Author: Keith Packard <keithp@keithp.com>
39396 Date: Thu Aug 26 23:44:25 2010 -0700
39398 altosui: add rssi and distance/dir from pad to CSV files
39400 Just adds a couple more fields to the CSV files that might be interesting.
39402 Signed-off-by: Keith Packard <keithp@keithp.com>
39404 commit 3dc67c1401976d6e9e2e942d5a4707a4810a0404
39405 Author: Keith Packard <keithp@keithp.com>
39406 Date: Thu Aug 26 23:43:00 2010 -0700
39408 altosui: Add AltosGreatCircle constructors
39410 This adds constructurs from AltosGPS pairs and also one from empty
39411 args (which defines both distance and bearing as 0).
39413 Signed-off-by: Keith Packard <keithp@keithp.com>
39415 commit f0fd423d0bf83bc5c3f9d39e9c09397fbe8caed2
39416 Author: Keith Packard <keithp@keithp.com>
39417 Date: Thu Aug 26 23:41:26 2010 -0700
39419 altosui: Move number parsing code to Altos general class
39421 This moves these shared functions to the global shared class.
39423 Signed-off-by: Keith Packard <keithp@keithp.com>
39425 commit 68b2b66d7574dfd0bd5e3571b8ffad32ca5d2b73
39426 Author: Keith Packard <keithp@keithp.com>
39427 Date: Thu Aug 26 23:37:29 2010 -0700
39429 altos: mark gps date written only after it gets into eeprom
39431 Data logging doesn't start until boost detect occurs. As the GPS date
39432 is only logged once, if that happens before logging is written to the
39433 flash, then the GPS date will never get saved.
39435 Signed-off-by: Keith Packard <keithp@keithp.com>
39437 commit aa6c27df5db6bdae59d00affccb891854a6caa18
39438 Author: Keith Packard <keithp@keithp.com>
39439 Date: Thu Aug 26 15:59:09 2010 -0700
39441 altos: print GPS state flags in GPS 'g' command
39443 Having the GPS state information can help with GPS debugging.
39445 Signed-off-by: Keith Packard <keithp@keithp.com>
39447 commit 34055129b4008f6a9833887b12dee39ffa408002
39448 Author: Keith Packard <keithp@keithp.com>
39449 Date: Thu Aug 26 15:57:09 2010 -0700
39451 altos: always rebuild ao_product.c to track git version
39453 The git version is built into ao_product.c and saved in eeprom log
39454 files, providing useful diagnostics about the firmware revision used
39455 for each flight. However, if ao_product.c isn't recompiled, then the
39456 updated version won't be included. Force recompilation of this file
39457 each time make is run to ensure that the final output contains an
39458 updated version number.
39460 Signed-off-by: Keith Packard <keithp@keithp.com>
39462 commit 99400fdc0f19ef538fc362dde5c3ab5b7cdac409
39463 Author: Keith Packard <keithp@keithp.com>
39464 Date: Tue Aug 24 16:43:38 2010 -0700
39466 altosui: flush replies from serial link when entering debug mode
39468 We use replies in debug mode a lot and depend on them matching the
39469 expected parameters. The case which caused trouble was using
39470 TeleMetrum to reprogram TeleDongle -- sending the 'm 0' command (to
39471 disable telemetry monitoring on TeleDongle) to the TeleMetrum caused
39472 it to reply 'Syntax Error' which confused the subsequent flashing
39473 operation. Flushing that reply gets things back in sync.
39475 Signed-off-by: Keith Packard <keithp@keithp.com>
39477 commit ba086cc77273efe5397f60dcaccd1e3771441481
39478 Author: Keith Packard <keithp@keithp.com>
39479 Date: Tue Aug 24 04:02:27 2010 -0700
39481 altosui: write USB serial number string while flashing
39483 USB serial number is encoded in UCS2 as a part of the string
39484 descriptors. Place those right after the other rom config bits so that
39485 altosui can find it. altosui is changed to write the serial number there.
39487 Signed-off-by: Keith Packard <keithp@keithp.com>
39489 commit 220f3afdaa432c65f8ad45be7cdbe5c8a3616db3
39490 Author: Keith Packard <keithp@keithp.com>
39491 Date: Tue Aug 24 04:01:47 2010 -0700
39493 altosui: always display romconfig ui while flashing
39495 commit f62b2aa08ebfd912b3c732397d43ff9f6162ec88
39496 Author: Keith Packard <keithp@keithp.com>
39497 Date: Tue Aug 24 04:01:14 2010 -0700
39499 altosui: fetch existing romconfig for flashing
39501 commit d93787284c8e514a929edb9f944c98ae0206a33f
39502 Author: Keith Packard <keithp@keithp.com>
39503 Date: Tue Aug 24 03:59:09 2010 -0700
39505 altosui: Delay mapping Flash UI until flashing actually starts
39507 The flash operation may be abandoned before it even starts; this makes
39508 sure the UI doesn't flash up on the screen.
39510 Signed-off-by: Keith Packard <keithp@keithp.com>
39512 commit 7d44cbd621d2b113ac2b802ef17e3d8a660ce7f2
39513 Author: Keith Packard <keithp@keithp.com>
39514 Date: Tue Aug 24 03:58:00 2010 -0700
39516 altosui: disable radio monitoring while using serial line for debugging
39518 commit 7bd220dfd9b3fb0e42eb90c3b37eb7b4169eb21b
39519 Author: Keith Packard <keithp@keithp.com>
39520 Date: Tue Aug 24 00:29:11 2010 -0700
39522 altosui: Add ability to create CSV file from telem or eeprom files
39524 This creates a comma separated value file to export data for
39527 Signed-off-by: Keith Packard <keithp@keithp.com>
39529 commit 634a550149e7c344a22a637ba484f115592b1018
39530 Author: Keith Packard <keithp@keithp.com>
39531 Date: Mon Aug 23 23:15:05 2010 -0700
39533 altosui: refactor logfile chooser dialog to share more code
39535 Move file opening logic into logfile chooser as it can be shared that way.
39537 Signed-off-by: Keith Packard <keithp@keithp.com>
39539 commit afea6c264c5ebf12f1d629bd4bc724da86d11b7a
39540 Merge: 0e17853 9d1b27f
39541 Author: Anthony Towns <aj@erisian.com.au>
39542 Date: Tue Aug 24 00:02:31 2010 -0600
39544 Merge branch 'master' of git://git.gag.com/fw/altos
39546 commit a55b132668a819cc26478a609cb79bd9190deb9d
39547 Author: Keith Packard <keithp@keithp.com>
39548 Date: Mon Aug 23 23:01:36 2010 -0700
39550 altosui: Separate out log file choosing dialog to share with CSV generator
39552 This dialog will be shared with the CSV file generating code, so split
39553 it out instead of duplicating it.
39555 Signed-off-by: Keith Packard <keithp@keithp.com>
39557 commit 295043112ccde35092945c286596f9045ee6fa05
39558 Merge: 2007288 ef8376c
39559 Author: Bdale Garbee <bdale@gag.com>
39560 Date: Mon Aug 23 23:11:22 2010 -0600
39562 Merge branch 'new-packet-format' of ssh://git.gag.com/scm/git/fw/altos into new-package-format
39564 commit ef8376c4dd8262a34e02b6bb9e19e907ac2f4330
39565 Author: Keith Packard <keithp@keithp.com>
39566 Date: Mon Aug 23 22:08:30 2010 -0700
39568 altosui: make default Manifest look for built-in freetts
39570 commit 56b906f535ac2f86bcab71addbbcd376d74f6a73
39571 Author: Keith Packard <keithp@keithp.com>
39572 Date: Mon Aug 23 22:03:36 2010 -0700
39574 altos: Place rom config variables in fixed location
39576 The device serial number and radio calibration values are stored in
39577 flash, mostly so that TeleDongle gets them saved.
39579 Placing them in well-known locations (starting at 0xa0) makes it
39580 possible to find the previous configuration and to re-write it
39581 easily, without requiring the .map file.
39583 altosui doesn't have the .map file parsing code, so it relies upon
39584 this new technique. As a benefit, it reads the old values from the
39585 device before reprogramming it.
39587 Signed-off-by: Keith Packard <keithp@keithp.com>
39589 commit 4c0c099716197ef7539be0cf55bbb164f6804958
39590 Author: Keith Packard <keithp@keithp.com>
39591 Date: Mon Aug 23 22:02:21 2010 -0700
39593 altosui: Finish device programming code
39595 Altosui can now reprogram Altusmetrum devices.
39597 Signed-off-by: Keith Packard <keithp@keithp.com>
39599 commit bd2b44ddd61fadd8bf8ee6bf783ce019b1be7cc0
39600 Author: Keith Packard <keithp@keithp.com>
39601 Date: Mon Aug 23 22:01:38 2010 -0700
39603 altosui: Remove debug printf from AltosRomconfig
39605 commit c3f57ffdb6c74de90d982eacd604e658ce9b00a5
39606 Author: Keith Packard <keithp@keithp.com>
39607 Date: Mon Aug 23 22:01:11 2010 -0700
39609 altosui: flush serial output before waiting for reply
39611 commit 8857ac5e43eac6db8d5594b8864df497a712242b
39612 Author: Keith Packard <keithp@keithp.com>
39613 Date: Mon Aug 23 22:00:16 2010 -0700
39615 altosui: remove debug printf from AltosHexfile
39617 commit b1758be01397fd49c441f40852f3558fe9343a2d
39618 Author: Keith Packard <keithp@keithp.com>
39619 Date: Mon Aug 23 21:58:50 2010 -0700
39621 altosui: Add lots more cc1111 debug interface functions
39623 These are sufficient to program the flash.
39625 Signed-off-by: Keith Packard <keithp@keithp.com>
39627 commit f9e80f39bc39e5882bfe75f959b6501cb3277cd2
39628 Author: Keith Packard <keithp@keithp.com>
39629 Date: Mon Aug 23 21:55:49 2010 -0700
39631 libaltos: use pipe to wake up getchar on close. use mutexes
39633 commit 86f7b9314b042f2e512fdf35067817e68532867b
39634 Author: Keith Packard <keithp@keithp.com>
39635 Date: Mon Aug 23 21:54:47 2010 -0700
39637 altosui: pad TM config dialog values to avoid clipping descenders
39639 commit b8519b8669ff54741dd738ac343fbd2424451247
39640 Author: Keith Packard <keithp@keithp.com>
39641 Date: Mon Aug 23 21:53:37 2010 -0700
39643 ao-dumplog: Fix --remote and --channel options to actually work
39645 commit ebeb13688a9a5442c838641ede6ba0dc92c9a1a4
39646 Author: Keith Packard <keithp@keithp.com>
39647 Date: Mon Aug 23 14:32:58 2010 -0700
39649 altosui: Add debug dongle API, split flash UI out
39651 Create an API to talk through the debug port on another AltOS
39652 device. Split the flash UI out from the flash implementation so that a
39653 command line flash utility can be written.
39655 Signed-off-by: Keith Packard <keithp@keithp.com>
39657 commit 7f8d7978606abe544b1b9b6065c5480ed813b8ec
39658 Author: Keith Packard <keithp@keithp.com>
39659 Date: Mon Aug 23 11:53:19 2010 -0700
39661 altosui: Add .ihx file reading code and stub out flashing UI
39663 Signed-off-by: Keith Packard <keithp@keithp.com>
39665 commit 2007288da8a83e3aa925e11cc196f1c65aab2e5c
39666 Author: Bdale Garbee <bdale@gag.com>
39667 Date: Thu Aug 5 15:00:15 2010 -0400
39669 working on java packaging details
39671 commit 44b26dd550eef789e70082ccaa46d7d430c67bce
39672 Author: Bdale Garbee <bdale@gag.com>
39673 Date: Thu Aug 5 15:15:04 2010 -0400
39675 add freetts as a build dep
39677 commit 0e17853c08f77debef3e8cf82e9cdb6a5079fc9b
39678 Author: Keith Packard <keithp@keithp.com>
39679 Date: Sun Aug 22 23:06:15 2010 -0700
39681 altosui: Set callsign when fetching eeprom data over the air
39683 The updated firmware places the callsign in each packet to comply with
39684 regulations, this ensures that TeleDongle has the current callsign
39687 Signed-off-by: Keith Packard <keithp@keithp.com>
39689 commit 953bc3438b10b21f3d65d292356c4ab2de23cddd
39690 Author: Keith Packard <keithp@keithp.com>
39691 Date: Sun Aug 22 23:05:20 2010 -0700
39693 altosui: Add TeleMetrum configuration
39695 This presents a dialog with all of the user-settable options in the
39696 TeleMetrum set for editing. Combo boxes are used for everything except
39699 Signed-off-by: Keith Packard <keithp@keithp.com>
39701 commit e1463d8e265dfd42c824d90088cd2a51b4cf8131
39702 Author: Keith Packard <keithp@keithp.com>
39703 Date: Sat Aug 21 17:57:31 2010 -0700
39705 altosui: Make teledongle callsign configurable
39707 Teledongle uses the callsign in packet mode; this provides a way to
39710 Signed-off-by: Keith Packard <keithp@keithp.com>
39712 commit 09252ec22d58e946494e4ca2cf367bf3bbe1cc50
39713 Author: Keith Packard <keithp@keithp.com>
39714 Date: Sat Aug 21 17:09:41 2010 -0700
39716 altos: Define USB product ID in per-product Makefile.defs file
39718 This allows Win7 to tell which kind of device is connected purely by
39719 USB id as it doesn't expose the USB product ID string to user space.
39721 Signed-off-by: Keith Packard <keithp@keithp.com>
39723 commit 22800dc094797e1e0ad99124198809d0360f7556
39724 Author: Keith Packard <keithp@keithp.com>
39725 Date: Tue Aug 17 18:22:28 2010 -0700
39727 altosui: Select devices by USB vendor/product ID.
39729 Because Win7 doesn't expose the product name, we're swtiching to using
39730 the USB idProduct/idVendor values. This patch adds support for
39731 selecting devices by those new IDs.
39733 Signed-off-by: Keith Packard <keithp@keithp.com>
39735 commit d14c96663a1027164fa30ed89b53f5a9d3fdb82b
39736 Author: Keith Packard <keithp@keithp.com>
39737 Date: Tue Aug 17 18:19:43 2010 -0700
39739 libaltos: integrate Windows support.
39741 This adds Windows support for discovery and I/O.
39743 The API to the library is mostly unchanged, except that it now exports
39744 product and vendor USB IDs as Win7 doesn't expose the product name
39745 anywhere that we've been able to find, so we'll be updating the
39746 firmware to use unique idProduct values for each product.
39748 Signed-off-by: Keith Packard <keithp@keithp.com>
39750 commit 9d1b27fa147fc8b765d5be165ebef7ee0f85bd37
39751 Author: Bdale Garbee <bdale@gag.com>
39752 Date: Wed Aug 11 22:11:50 2010 -0400
39754 update changelogs for Debian build
39756 commit b6da90b4627dde1fe88240c38c51559d8f781dd0
39757 Author: Bdale Garbee <bdale@gag.com>
39758 Date: Wed Aug 11 17:15:39 2010 -0400
39760 update changelogs for Debian build
39762 commit 4918f73fd0a0f3f5d52907f95a0ec385e901d447
39763 Author: Bdale Garbee <bdale@gag.com>
39764 Date: Wed Aug 11 08:50:27 2010 -0400
39766 update changelogs for Debian build
39768 commit f63f16a70e4d0535667a6364cafcbff026ee6a8c
39769 Author: Bdale Garbee <bdale@gag.com>
39770 Date: Wed Aug 11 08:36:59 2010 -0400
39772 update changelogs for Debian build
39774 commit 294d9c7db21eaf1e71504dbcca5040371abcce55
39775 Author: Keith Packard <keithp@keithp.com>
39776 Date: Sat Aug 7 22:30:55 2010 -0400
39778 ao-dumplog: add --channel option (for use with -R option)
39780 Sets the channel when downloading data with the -R option.
39782 Signed-off-by: Keith Packard <keithp@keithp.com>
39784 commit f317f1324b69b4241f4bb192e164b33d712d5a43
39785 Author: Keith Packard <keithp@keithp.com>
39786 Date: Sat Aug 7 00:42:25 2010 -0400
39788 altosui: Start adding code to write csv files from eeprom/telem files
39790 This is a start to code which can write out a csv file full of flight
39791 data from either an eeprom or telem input file. It's not hooked up,
39792 but the restructuring necessary is finished and the output is started.
39794 Signed-off-by: Keith Packard <keithp@keithp.com>
39796 commit 4738cb2fc639adb1d9237e6c903479f0690dd81a
39797 Author: Keith Packard <keithp@keithp.com>
39798 Date: Sat Aug 7 00:40:59 2010 -0400
39800 altos: add callsign to packet mode, increase payload to 64 bytes
39802 Untested, but it 'should' work. Need to add callsign setting to packet
39805 Signed-off-by: Keith Packard <keithp@keithp.com>
39807 commit b7699a5907e64bc7547fcc27e73f4a35bbaabfff
39808 Author: Keith Packard <keithp@keithp.com>
39809 Date: Fri Aug 6 13:09:21 2010 -0400
39811 altosui: Add comments to Eeprom reader
39813 commit 0e917f3ff822616adb147517ac961422e5fedbfd
39814 Author: Keith Packard <keithp@keithp.com>
39815 Date: Thu Aug 5 22:49:53 2010 -0400
39817 altosui: Compute flight state from eeprom data
39819 This lets eeprom files be used to replay flights.
39821 Signed-off-by: Keith Packard <keithp@keithp.com>
39823 commit a0a9b445a4d379730b67720f8d7b682d5206a582
39824 Author: Bdale Garbee <bdale@gag.com>
39825 Date: Thu Aug 5 15:16:48 2010 -0400
39827 update changelogs for Debian build
39829 commit e075b8623533965b1b77b77d38c2df32f5f77fce
39830 Author: Bdale Garbee <bdale@gag.com>
39831 Date: Thu Aug 5 15:16:24 2010 -0400
39833 update changelogs for Debian build
39835 commit 410de62715a0830f03b0a65d6c7730dff51e6ef4
39836 Author: Bdale Garbee <bdale@gag.com>
39837 Date: Thu Aug 5 15:15:04 2010 -0400
39839 add freetts as a build dep
39841 commit 0b85160c44d934f3d1352c1c07c296d01ceffc32
39842 Author: Bdale Garbee <bdale@gag.com>
39843 Date: Thu Aug 5 15:02:17 2010 -0400
39845 update changelogs for Debian build
39847 commit d091099753d9cae01c4805812425ebea19ec09cf
39848 Author: Bdale Garbee <bdale@gag.com>
39849 Date: Thu Aug 5 15:00:46 2010 -0400
39851 update changelogs for Debian build
39853 commit aed55ef1ce45b0f6e6fefeebf50be97607b31d65
39854 Author: Bdale Garbee <bdale@gag.com>
39855 Date: Thu Aug 5 15:00:15 2010 -0400
39857 working on java packaging details
39859 commit d8bf05f7ad55964c9bce0551e58f4ef6c9f721ad
39860 Author: Keith Packard <keithp@keithp.com>
39861 Date: Thu Aug 5 13:50:18 2010 -0400
39863 altosui: Split flight record out of telemetry class
39865 This will permit either telemetry or eeprom data to be used to
39866 construct the sequence of flight events for reply or data generation.
39868 Signed-off-by: Keith Packard <keithp@keithp.com>
39870 commit 85a670b5a904d6750d0f179ae307baeb8fc7cbd2
39871 Author: Keith Packard <keithp@keithp.com>
39872 Date: Thu Aug 5 13:40:17 2010 -0400
39874 altosui: Explicitly initialize Altos class
39876 Because the Altos class is never instantiated, the static initializers
39877 are never called, leaving the string to state mapping empty. Hand-code
39878 the call to the initialer instead.
39880 Signed-off-by: Keith Packard <keithp@keithp.com>
39882 commit 02f17f2cd26189e2676a9dc0d86bd959ed0bc3f4
39883 Author: Bdale Garbee <bdale@gag.com>
39884 Date: Thu Aug 5 00:54:05 2010 -0400
39886 move to science menu
39888 commit 9e8f7f75442303f9bfa99a0435984f5d36863ae6
39889 Author: Keith Packard <keithp@keithp.com>
39890 Date: Sat Jul 31 10:34:21 2010 -0700
39892 altosui: Split status and info panels into separate files
39894 This moves some code out of AltosUI.java into separate files
39896 Signed-off-by: Keith Packard <keithp@keithp.com>
39898 commit 9c9b35254c693b3ade42b24d1e29eaf31e6ba2aa
39899 Author: Keith Packard <keithp@keithp.com>
39900 Date: Sat Jul 31 10:24:56 2010 -0700
39902 altosui: Clear displayed data rows as needed.
39904 Signed-off-by: Keith Packard <keithp@keithp.com>
39906 commit 88e0137a60d7a13ddb7781befa76650e13ad44ae
39907 Author: Keith Packard <keithp@keithp.com>
39908 Date: Sat Jul 31 10:07:38 2010 -0700
39910 altosui: Merge gps date and time classes into gps class
39912 No reason to split out the date and time information from the other gps info.
39914 Signed-off-by: Keith Packard <keithp@keithp.com>
39916 commit 1c3b2fe357d6acf28f48aeddd91693f10381be51
39917 Author: Keith Packard <keithp@keithp.com>
39918 Date: Sat Jul 31 10:05:15 2010 -0700
39920 altosui: Capture config and version info in .eeprom files
39922 Instead of only writing the serial number to the .eeprom file, write
39923 all of the config values and all of the version reply to the .eeprom
39924 file. The config values, in particular, contain the accelerometer
39925 calibration data which is needed to correctly compute acceleration
39926 from the captured accelerometer data.
39928 Signed-off-by: Keith Packard <keithp@keithp.com>
39930 commit e286eb61ad2a90746c1c31f95d26d5edb48738d3
39931 Author: Keith Packard <keithp@keithp.com>
39932 Date: Sat Jul 31 09:57:49 2010 -0700
39934 altosui: rename AltosEeprom -> AltosEepromDownload, split out Altos constants
39936 Renames the eeprom downloading code and adds a new file to share the
39937 flight data constants across the various UI modules.
39939 Signed-off-by: Keith Packard <keithp@keithp.com>
39941 commit e3a9e3815db3f290e28b40ae02aa654f515cfc37
39942 Author: Bdale Garbee <bdale@gag.com>
39943 Date: Sat Jul 31 10:55:27 2010 -0600
39945 update changelogs for Debian build
39947 commit 8fc261c2b77bb8aab201a0649a84b5ffa236ce26
39948 Author: Bdale Garbee <bdale@gag.com>
39949 Date: Sat Jul 31 10:55:07 2010 -0600
39951 see if my new freetts package works
39953 commit 2f114c7ff6b0deddb790d34139bb11ac37f8c0da
39954 Author: Bdale Garbee <bdale@gag.com>
39955 Date: Thu Jul 29 13:30:36 2010 -0600
39957 update changelogs for Debian build
39959 commit 7877496d47ce6d25210c0e1c6500666dbfc0876c
39960 Merge: c71061a 4cf39b1
39961 Author: Keith Packard <keithp@keithp.com>
39962 Date: Thu Jul 29 12:07:49 2010 -0700
39964 Merge remote branch 'origin/master'
39966 commit c71061a37d3d3be2855b61cde33d2371989d7681
39967 Author: Keith Packard <keithp@keithp.com>
39968 Date: Thu Jul 29 12:06:06 2010 -0700
39970 Make altosui test script executable
39972 commit 4cf39b13a574cb656999cf329f5b08e7f910604b
39973 Author: Bdale Garbee <bdale@gag.com>
39974 Date: Thu Jul 29 12:57:31 2010 -0600
39976 update changelogs for Debian build
39978 commit d1848193d8208388e4ccdfbed4e5663a9ba04dd3
39979 Author: Bdale Garbee <bdale@gag.com>
39980 Date: Thu Jul 29 12:56:59 2010 -0600
39982 add a jdk to the build deps
39984 commit 9ad4984124b6c05114feac4c4ac078dc248ce16a
39985 Author: Keith Packard <keithp@keithp.com>
39986 Date: Thu Jul 29 11:56:24 2010 -0700
39988 altosui: remove option to install to alternate volume
39990 commit 2e797b18f0724caf7aaf96f45997998c7416f34e
39991 Author: Bdale Garbee <bdale@gag.com>
39992 Date: Thu Jul 29 12:50:57 2010 -0600
39994 update changelogs for Debian build
39996 commit 89109f9dff3ce855d80da166e3362375282f745d
39997 Author: Bdale Garbee <bdale@gag.com>
39998 Date: Thu Jul 29 12:47:37 2010 -0600
40000 ugh, fixing failure due to aborted build
40002 commit 6fb8546575f6d99676dbb1dce190b0b7cf24b657
40003 Author: Keith Packard <keithp@keithp.com>
40004 Date: Thu Jul 29 11:45:56 2010 -0700
40006 Moved Mac OS packaging to altosui dir
40008 commit 865d5cdf8931ffc796f608e3e12d7c5a70832825
40009 Author: Bdale Garbee <bdale@gag.com>
40010 Date: Thu Jul 29 12:45:18 2010 -0600
40012 add swig as a build dep
40014 commit 91d75fb3919f606a1956bf8c6423a8012d99a56a
40015 Author: Keith Packard <keithp@keithp.com>
40016 Date: Thu Jul 29 11:45:12 2010 -0700
40018 altosui: Switch eeprom extension back to .eeprom
40020 commit 33ffd89d5a64c991d28bd7369b61e1faa18f605b
40021 Author: Bdale Garbee <bdale@gag.com>
40022 Date: Thu Jul 29 12:40:52 2010 -0600
40024 update changelogs for Debian build
40026 commit 62b4cc51a0f54ef363cbff46caef80a0afecdea2
40027 Author: Bdale Garbee <bdale@gag.com>
40028 Date: Thu Jul 29 12:40:25 2010 -0600
40030 update changelogs for Debian build
40032 commit 6f86db5e0360bef26b21336769b7635e3a11e160
40033 Author: Keith Packard <keithp@keithp.com>
40034 Date: Thu Jul 29 11:24:47 2010 -0700
40036 Add Mac OS X packaging bits
40038 Signed-off-by: Keith Packard <keithp@keithp.com>
40040 commit 950f0a8c54e5835ee5d8b0aea360bd8362c21bc5
40041 Author: Keith Packard <keithp@keithp.com>
40042 Date: Thu Jul 29 11:09:19 2010 -0700
40044 altosui: construct Darwin application directory
40046 This adds the necessary files and build steps to construct
40047 AltosUI.app on a Darwin system.
40049 Signed-off-by: Keith Packard <keithp@keithp.com>
40051 commit 669c5f52abb972a82ed6efbee7a8c7d20afb5cd0
40052 Author: Keith Packard <keithp@keithp.com>
40053 Date: Thu Jul 29 10:48:52 2010 -0700
40055 libaltos: build with java src encoding UTF8
40057 Signed-off-by: Keith Packard <keithp@keithp.com>
40059 commit efa0e034a161f4852947cbac06537d6ba4422a0e
40060 Author: Keith Packard <keithp@keithp.com>
40061 Date: Thu Jul 29 10:48:25 2010 -0700
40063 altosui: remove debug printf
40065 Signed-off-by: Keith Packard <keithp@keithp.com>
40067 commit 53c279b9e96da8b69837ae84038a78ca5707f2a5
40068 Author: Keith Packard <keithp@keithp.com>
40069 Date: Thu Jul 29 10:45:02 2010 -0700
40071 altosui: Close serial, join reader thread, free altos_file
40073 Separating out the close and free actions ensures that the reader thread will not
40074 access freed memory or dereference a null pointer while shutting down the
40075 connection to the serial device. Otherwise, a race condition exists between the
40076 serial close and the thread join.
40078 Signed-off-by: Keith Packard <keithp@keithp.com>
40080 commit b8bc9994d8bfde6116c8a509e70ddf45fc4decce
40081 Author: Keith Packard <keithp@keithp.com>
40082 Date: Thu Jul 29 10:24:59 2010 -0700
40084 altosui: Remove unnecessary freetts .jar files
40086 Signed-off-by: Keith Packard <keithp@keithp.com>
40088 commit e33dbbba94ce42295e9fed9f4ba7e46f9eff1517
40089 Author: Keith Packard <keithp@keithp.com>
40090 Date: Thu Jul 29 10:24:09 2010 -0700
40092 altosui: check for closed serial device before reading
40094 Signed-off-by: Keith Packard <keithp@keithp.com>
40096 commit 27a2d0c00acf78628428c20ab68e2bfba06340da
40097 Author: Bdale Garbee <bdale@gag.com>
40098 Date: Thu Jul 29 11:02:38 2010 -0600
40100 update changelogs for Debian build
40102 commit 537492dc961ee6a1945b1041ee3cc0d3f519a42c
40103 Author: Bdale Garbee <bdale@gag.com>
40104 Date: Thu Jul 29 11:01:21 2010 -0600
40106 update changelogs for Debian build
40108 commit adf6cbcba23e24a3824f7e242ec37baa2750ab94
40109 Author: Bdale Garbee <bdale@gag.com>
40110 Date: Thu Jul 29 10:59:18 2010 -0600
40112 update changelogs for Debian build
40114 commit d0fd53bdab2f480cd43b6d7010c2094f4fccda91
40115 Author: Keith Packard <keithp@keithp.com>
40116 Date: Wed Jul 28 21:49:23 2010 -0700
40118 Reset GPS ready status when GPS comes unlocked on the pad
40120 If GPS becomes unlocked, then report that in the UI and via
40123 Signed-off-by: Keith Packard <keithp@keithp.com>
40125 commit 5fd225c3a52445ecdc7c04fac5e3d9a0db177c66
40126 Author: Keith Packard <keithp@keithp.com>
40127 Date: Wed Jul 28 21:01:41 2010 -0700
40129 altosui: report rocket ground bearing at landing only if known
40131 if state.from_pad is null, then there isn't any data to report.
40133 Signed-off-by: Keith Packard <keithp@keithp.com>
40135 commit d2d772164af95a35ea0f5d2413a5be67de9a210f
40136 Author: Keith Packard <keithp@keithp.com>
40137 Date: Wed Jul 28 20:18:36 2010 -0700
40139 altosui: Replace device dialog. Center eeprom monitor.
40141 This adds a custom dialog for selecting device, which makes it look
40142 much nicer on the screen and allows the user to double-click on an
40143 entry to select it.
40145 Signed-off-by: Keith Packard <keithp@keithp.com>
40147 commit ea32290704a8ca468f01172166b561833b20c954
40148 Author: Keith Packard <keithp@keithp.com>
40149 Date: Wed Jul 28 19:37:02 2010 -0700
40151 altosui: Fix Save flight data monitor layout, add cancel
40153 Use GridBagLayout to improve the appearance of the flight data monitor
40154 widget, add a cancel button to stop loading data (useful if the
40155 connection is wedged).
40157 Signed-off-by: Keith Packard <keithp@keithp.com>
40159 commit ce90f3fe2aa6e23695ccccb36a8e6e614a08ba31
40160 Author: Keith Packard <keithp@keithp.com>
40161 Date: Wed Jul 28 17:08:42 2010 -0700
40163 altosui: Add progress bar for eeprom downloading status
40165 This has a progress bar tracking the state and block count while
40166 downloading stuff from telemetrum.
40168 Signed-off-by: Keith Packard <keithp@keithp.com>
40170 commit 6599e9576c3da9325a1731144c1b8bc4943184c0
40171 Author: Keith Packard <keithp@keithp.com>
40172 Date: Wed Jul 28 15:41:34 2010 -0700
40174 altosui: Add eeprom data capture function. No UI yet.
40176 Signed-off-by: Keith Packard <keithp@keithp.com>
40178 commit 8a6040e143ecc7830cc1c0114de85f3b72c067eb
40179 Merge: 024d077 554a97e
40180 Author: Keith Packard <keithp@keithp.com>
40181 Date: Wed Jul 28 13:29:51 2010 -0700
40183 Merge remote branch 'keithp/macos'
40185 commit 024d077302f91bdb17abe70d3211ab0949dab8b9
40186 Author: Keith Packard <keithp@keithp.com>
40187 Date: Wed Jul 28 13:29:21 2010 -0700
40189 Remove debug printf
40191 Signed-off-by: Keith Packard <keithp@keithp.com>
40193 commit 826061eaca88c0dd75051a6006ef6703c91af595
40194 Author: Keith Packard <keithp@keithp.com>
40195 Date: Wed Jul 28 13:10:11 2010 -0700
40197 Add voice test command for help in adjusting volume.
40199 Signed-off-by: Keith Packard <keithp@keithp.com>
40201 commit 71da54a5ce255395376a44586782ab8b6f3b289f
40202 Author: Keith Packard <keithp@keithp.com>
40203 Date: Wed Jul 28 13:01:52 2010 -0700
40205 Make voice and channel menus work.
40207 Stores voice and channel data to preferences.
40209 Signed-off-by: Keith Packard <keithp@keithp.com>
40211 commit e76b9cc32bbcc5176d9bdd6f8d79778024627382
40212 Author: Keith Packard <keithp@keithp.com>
40213 Date: Wed Jul 28 12:24:53 2010 -0700
40215 altosui: Catch errors opening USB devices. Limit list to relevant devices
40217 Avoids a segfault when failing to open a device. Limit listed telemetry
40218 devices to just TeleDongle units.
40220 Signed-off-by: Keith Packard <keithp@keithp.com>
40222 commit 172a2817dde6718724f2b5fad5a7761801446fa0
40223 Merge: f2a006f 81bf204
40224 Author: Keith Packard <keithp@keithp.com>
40225 Date: Wed Jul 28 11:20:22 2010 -0700
40227 Merge branch 'macos'
40229 commit f2a006fd98045066bdf429cc142d033e9feb0a8f
40230 Author: Keith Packard <keithp@keithp.com>
40231 Date: Wed Jul 28 09:31:09 2010 -0700
40233 Make ao_log_data re-entrant as it is used for both sensor and GPS logs
40235 Because ao_log_data is called from two different threads, failing to
40236 make it re-entrant would cause the 'log' pointer parameter to get
40237 overwritten if another thread asked to log data while the eeprom was
40238 busy writing out a block.
40240 This would cause the second thread to re-writing data from the first
40241 thread's address, but without re-checksumming the data as the checksum
40242 is computed before the log mutex is taken.
40244 The bug can be seen by log blocks with invalid checksums.
40246 Here's what happens with the ao_gps_tracking_report and ao_log threads:
40248 ao_gps_tracking_report ao_log
40250 Writes a bunch of records
40251 *blocks* in the eeprom flush
40252 sets ao_log_data 'log' to global 'log'
40253 computes checksum for 'log' block
40254 *blocks* on ao_log_mutex
40256 sets ao_log_data 'log' to 'gps_log'
40257 writes remaining records
40258 'gps_log' is left with svid = 0
40259 *blocks* on ao_gps_tracking_data
40260 writes data, reading from
40261 the current ao_log_data 'log'
40262 pointer which points at 'gps_log'
40264 Making ao_log_data re-entrant fixes this by ensuring that the 'ao_log'
40265 thread has its own copy of the ao_log_data 'log' parameter.
40267 I made this function take an __xdata restricted pointer so that it
40268 could be passed in the dptr register instead of needing to go on the stack.
40270 Signed-off-by: Keith Packard <keithp@keithp.com>
40272 commit 554a97ef455c801dcab825815f44520f96f4c3f3
40273 Author: Keith Packard <keithp@keithp.com>
40274 Date: Tue Jul 27 19:29:38 2010 -0700
40276 Force java source encoding to UTF-8
40278 commit 81bf2042ca39eb106b789e5a08647c3114669358
40279 Author: Keith Packard <keithp@keithp.com>
40280 Date: Tue Jul 27 15:29:28 2010 -0700
40282 Java voice reporting cleanups.
40284 Make sure it says something at the end of a log file replay.
40285 Make sure it reports max speed after motor burn out, and max height
40288 Signed-off-by: Keith Packard <keithp@keithp.com>
40290 commit 8f2f38f2a9fb0c106e2c6b60cdc205292ce329ea
40291 Author: Keith Packard <keithp@keithp.com>
40292 Date: Tue Jul 27 10:18:20 2010 -0700
40294 Java clean ups -- use varargs where possible, remove AltosSerialReader
40296 Add methods that format stuff using String.format for voice and serial
40297 link, remove AltosSerialReader class and just embed that in the
40298 AltosSerial class directly.
40300 Signed-off-by: Keith Packard <keithp@keithp.com>
40302 commit 734cd15ccff691f851359518ce6118f29dc9f88d
40303 Author: Keith Packard <keithp@keithp.com>
40304 Date: Tue Jul 27 10:18:09 2010 -0700
40306 Remove directories as .class file dependencies; it makes them get rebuilt all the time
40308 commit 809feb75e2155e84aebfcc431867edcfd9054670
40309 Author: Keith Packard <keithp@keithp.com>
40310 Date: Tue Jul 27 01:22:56 2010 -0700
40312 Clean up altosui build a bit
40314 commit 3784578a40dcc61f447435cfdf22e13c409cb9c0
40315 Author: Keith Packard <keithp@keithp.com>
40316 Date: Tue Jul 27 00:16:15 2010 -0700
40318 Add application icons for Mac OS X
40320 commit 2c273710ea9b76ebee4101893f9fe84be8a02354
40321 Author: Keith Packard <keithp@keithp.com>
40322 Date: Tue Jul 27 00:11:58 2010 -0700
40324 Add Mac OS X packaging files for altosui
40326 commit a58c44cd904e5429b807e5c23913051ed6484edc
40327 Author: Keith Packard <keithp@keithp.com>
40328 Date: Tue Jul 27 00:09:41 2010 -0700
40330 libaltos: build fat 10.5-compatible library
40332 Signed-off-by: Keith Packard <keithp@keithp.com>
40334 commit 4e3285575e0c7d029e799258587e965779990099
40335 Author: Keith Packard <keithp@keithp.com>
40336 Date: Tue Jul 27 00:09:18 2010 -0700
40338 libaltos: make clean remove all built files
40340 Signed-off-by: Keith Packard <keithp@keithp.com>
40342 commit fb8507975c6e081de2e909eca6faaa8f868b609e
40343 Author: Keith Packard <keithp@keithp.com>
40344 Date: Tue Jul 27 00:08:38 2010 -0700
40346 libaltos needs -I. on all systems
40348 Signed-off-by: Keith Packard <keithp@keithp.com>
40350 commit 0a782026f6b19e84ffd44f1ae1b466363474bd30
40351 Author: Keith Packard <keithp@keithp.com>
40352 Date: Mon Jul 26 18:10:07 2010 -0700
40354 Darwin doesn't have strndup.
40356 This provides a private version of this GNU extension.
40358 Signed-off-by: Keith Packard <keithp@keithp.com>
40360 commit b51497597868a40df039dd3ca11b35a6258bbbb3
40361 Author: Keith Packard <keithp@keithp.com>
40362 Date: Mon Jul 26 18:04:10 2010 -0700
40364 Re-enable Linux support for altosui.
40366 This steals code from cc-usbdev for scanning the USB tree and uses the
40367 same tty code as on Darwin
40369 Signed-off-by: Keith Packard <keithp@keithp.com>
40371 commit e9153c4f2c71ed965822fcfe5112d2bc38506baf
40372 Author: Keith Packard <keithp@keithp.com>
40373 Date: Mon Jul 26 17:04:04 2010 -0700
40377 commit 17188f36fe18c23bc2eb877ac9a01b7693f4b863
40378 Author: Keith Packard <keithp@keithp.com>
40379 Date: Mon Jul 26 17:03:47 2010 -0700
40381 Present list of altos devices in nice format
40383 commit 005e2d6a7bb3b0546b0c1273296875621632ec6d
40384 Author: Keith Packard <keithp@keithp.com>
40385 Date: Mon Jul 26 15:42:48 2010 -0700
40387 Switch AltosUI to libaltos for device access
40389 Signed-off-by: Keith Packard <keithp@keithp.com>
40391 commit c726d8f6eb861801d7543552beab6ee2c920c96f
40392 Author: Keith Packard <keithp@keithp.com>
40393 Date: Mon Jul 26 15:41:39 2010 -0700
40395 Add libaltos which talks to USB connected altos devices
40397 commit 05111d5be4d37bedaaee6415d6ee27347e6a112c
40398 Author: Keith Packard <keithp@keithp.com>
40399 Date: Mon Jul 26 12:52:17 2010 -0700
40401 When the EP0 IN buffer is full, don't panic, just skip sending another
40403 If the host doesn't pull the IN packet out of EP0 before sending
40404 another SETUP command along, the IN buffer will still be busy when we
40405 try to reply to the SETUP command. While I don't quite understand why
40406 this would ever happen, there's no need to panic about it, just drop
40407 the reply packet on the floor.
40409 Signed-off-by: Keith Packard <keithp@keithp.com>
40411 commit d0647950b76bfa9942e4f8cf87353f2b724099f4
40412 Author: Bdale Garbee <bdale@gag.com>
40413 Date: Wed Jul 21 14:26:36 2010 -0600
40415 fix text since TM only has one led to blink
40417 commit 8eda9fe94a7fd40cb84f50e17e64956f1584ebdc
40418 Author: Bdale Garbee <bdale@gag.com>
40419 Date: Tue Jul 20 22:24:32 2010 -0600
40421 update changelogs for Debian build
40423 commit cd8aa79de72b8b6b3a26d0c2522e94c621b70f13
40424 Author: Bdale Garbee <bdale@gag.com>
40425 Date: Tue Jul 20 22:24:01 2010 -0600
40427 update to latest Debian standards version
40429 commit 3284c7516e302e6db403d18866924ad926ffb2a7
40430 Author: Bdale Garbee <bdale@gag.com>
40431 Date: Tue Jul 20 22:20:08 2010 -0600
40433 update changelogs for Debian build
40435 commit 8f1933717e3acfbcb09191da6e79a7944f91f9d9
40436 Author: Bdale Garbee <bdale@gag.com>
40437 Date: Tue Jul 20 22:19:27 2010 -0600
40439 reflect documentation file name change
40441 commit 2cf1ef555a7feceeb1c333b273c19dd848e8d03f
40442 Author: Bdale Garbee <bdale@gag.com>
40443 Date: Tue Jul 20 22:15:47 2010 -0600
40445 update changelogs for Debian build
40447 commit 74c67fc466118b86b4eb5173f7a6886ae220a985
40448 Author: Bdale Garbee <bdale@gag.com>
40449 Date: Tue Jul 20 22:14:27 2010 -0600
40451 add build dep for sndfile
40453 commit 0794ab1e13313fa49b7caf01aef20b052ad78a88
40454 Author: Bdale Garbee <bdale@gag.com>
40455 Date: Tue Jul 20 22:10:01 2010 -0600
40457 update changelogs for Debian build
40459 commit 15a6791ba8f8313b6b55752c3fa7dc254d56dd5c
40460 Author: Bdale Garbee <bdale@gag.com>
40461 Date: Tue Jul 20 22:08:56 2010 -0600
40463 update changelogs for Debian build
40465 commit e747954b6a9e71705f619684df8a118a909b1039
40466 Merge: bd40a5b 695879d
40467 Author: Bdale Garbee <bdale@gag.com>
40468 Date: Tue Jul 20 22:07:22 2010 -0600
40470 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
40472 commit bd40a5b431847c071f5c486d754eca5627e5e3b9
40473 Author: Bdale Garbee <bdale@gag.com>
40474 Date: Tue Jul 20 02:12:03 2010 -0600
40478 commit 695879dbccfc5ec6b79698653c58814158f91686
40479 Author: Keith Packard <keithp@keithp.com>
40480 Date: Wed Jul 14 19:07:02 2010 -0700
40482 Switch DBG pins to GPIO when using any debug commands. Reboot to restore.
40484 If you want to use TeleMetrum as a debug dongle, you need to flip the
40485 three pins used to talk to the remote debug port from SPI mode to GPIO
40488 This patch doesn't provide any way to get back to SPI mode, so you'll
40489 have to reboot the TeleMetrum to write out config parameters or log
40490 flight data after using any debug commands.
40492 Signed-off-by: Keith Packard <keithp@keithp.com>
40494 commit a9ec6be0e92dee01f7aac006ef6f7779c1da1b36
40495 Author: Keith Packard <keithp@keithp.com>
40496 Date: Sat Jul 3 17:42:36 2010 -0400
40498 Telemetry code was mis-computing RSSI
40500 The RSSI data from the hardware reports in 1/2 dBm increments, and so
40501 must be divided to report plain RSSI numbers.
40503 Signed-off-by: Keith Packard <keithp@keithp.com>
40505 commit 62294ea3830d3ea261a8761edc9fa6f98201d321
40506 Author: Bdale Garbee <bdale@gag.com>
40507 Date: Thu Jun 24 12:38:23 2010 -0700
40509 update changelogs for Debian build
40511 commit 4766b13d1241fa585907c6f77707d2d4b3ccff75
40512 Author: Bdale Garbee <bdale@gag.com>
40513 Date: Thu Jun 24 12:37:55 2010 -0700
40515 update changelogs for Debian build
40517 commit 52834517c0706b1f16fb81643a42dc1c1997e00a
40518 Author: Keith Packard <keithp@keithp.com>
40519 Date: Mon Jun 21 15:53:33 2010 -0700
40521 Abort any in-progress radio operation when changing radio channel
40523 In monitor mode, the current receive operation must be aborted so that
40524 the radio channel change can take effect without receiving a
40525 telemetry packet on the old channel. Aborting any in-progress radio
40526 operation will make sure that happens.
40528 Signed-off-by: Keith Packard <keithp@keithp.com>
40530 commit 5933eaa44fe45027b856f1303dd657b974eb53e7
40531 Author: Keith Packard <keithp@keithp.com>
40532 Date: Mon Jun 21 11:44:32 2010 -0700
40534 ao-postflight: was walking off state.data array
40536 commit 11d155d558d0b121b66f089adee0a47d71f65a78
40537 Merge: 544003a 24393ea
40538 Author: Keith Packard <keithp@keithp.com>
40539 Date: Wed Jun 16 21:54:06 2010 -0700
40541 Merge remote branch 'mjb/master'
40543 commit 544003a8da0248fd6f3c62ded86af74ab7cdadf6
40544 Merge: 267923e 93c1e29
40545 Author: Keith Packard <keithp@keithp.com>
40546 Date: Wed Jun 16 21:52:23 2010 -0700
40548 Merge remote branch 'origin/master'
40550 commit 267923e56e22b3635a21f42ef77a3a36158bc273
40551 Author: Keith Packard <keithp@keithp.com>
40552 Date: Wed Jun 16 21:49:43 2010 -0700
40554 Add special code for USB panic's.
40556 The USB system may panic if the hardware isn't ready for IN data when
40557 the driver thinks it should be. This adds a special panic code to make
40558 figuring this out easier.
40560 Signed-off-by: Keith Packard <keithp@keithp.com>
40562 commit 50ae347bf9de49ccfc92d26888f36e155fb406a3
40563 Author: Keith Packard <keithp@keithp.com>
40564 Date: Wed Jun 16 21:48:04 2010 -0700
40566 ao-view: disable radio telemetry monitoring during channel change
40568 This makes ao-view disable the radio so that the channel change has an
40569 immediate effect rather than waiting for a packet on the old channel.
40571 Note that this should also be fixed in the TM code itself so that this
40572 change wouldn't be required.
40574 Signed-off-by: Keith Packard <keithp@keithp.com>
40576 commit 24393eab0ea085f2d0224b59fdc3c00693e5d3a9
40577 Author: Mike Beattie <mike@ethernal.org>
40578 Date: Thu Jun 17 14:04:01 2010 +1200
40580 Extension to KML output format, and minor bug fix
40582 Extended KML output by breaking flight into coloured segments representing
40583 flight state. Add extra statistical information to description bubbles
40584 visible in Google Earth when clicking on links in My Places.
40587 * output kml to file provided as argument.
40588 * move kml coordinate output code to take advantage of nsat calculation
40589 * remove superfluous %9.2f format specifier from raw_file output.
40591 Signed-off-by: Mike Beattie <mike@ethernal.org>
40593 commit 93c1e29b07c331a5ca6e0f647b9d2e9266ed3014
40594 Author: Bdale Garbee <bdale@gag.com>
40595 Date: Tue May 18 23:12:45 2010 -0600
40599 commit bb46c9a1da5788a082e4483e576a5a6d3963507b
40600 Author: Bdale Garbee <bdale@gag.com>
40601 Date: Tue May 18 00:26:28 2010 -0600
40603 update changelogs for Debian build
40605 commit 16c4cae7ebed7bd3ee0f12b8872bf950574f17e8
40606 Author: Bdale Garbee <bdale@gag.com>
40607 Date: Tue May 18 00:26:00 2010 -0600
40609 update changelogs for Debian build
40611 commit bc89d962c87b50e5487628f8ca25e4443ac4823d
40612 Author: Bdale Garbee <bdale@gag.com>
40613 Date: Tue May 18 00:24:03 2010 -0600
40615 merge the altusmetrum-themes package
40617 commit 0c6cf621dfd8339b8bc3915750a3147235f1331b
40618 Merge: 32e430b 563a9dc
40619 Author: Bdale Garbee <bdale@gag.com>
40620 Date: Mon May 17 23:59:43 2010 -0600
40622 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
40624 commit 32e430b8a5f93b312f6359b4d553bad92ed37b19
40625 Author: Bdale Garbee <bdale@gag.com>
40626 Date: Mon May 17 22:43:19 2010 -0600
40628 merge in a derivative of Bob Finch's mere mortals guide as a getting started
40631 commit 563a9dcdfef42718370c49f16cc2271642b3e055
40632 Author: Keith Packard <keithp@keithp.com>
40633 Date: Mon May 17 21:30:57 2010 -0700
40635 Finish basic flight monitoring UI with voice using FreeTTS
40637 This captures telemetry data to log files and presents flight status
40638 information in audio form using FreeTTS.
40640 Signed-off-by: Keith Packard <keithp@keithp.com>
40642 commit 69092ffd23ac1928d5c84413fd00c2423f313fc2
40643 Merge: 3c2211a cc002c0
40644 Author: Bdale Garbee <bdale@gag.com>
40645 Date: Mon May 17 20:10:46 2010 -0600
40647 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
40649 commit cc002c0a43a02845ba67d1a61828be382f307b2e
40650 Author: Keith Packard <keithp@keithp.com>
40651 Date: Sun May 16 22:31:23 2010 -0700
40653 Fix telemetrum.inf, tested by Adrian and Keithp
40655 commit 3c2211ad7877d622435bc9e8c9c0b01d62be6ff0
40656 Author: Bdale Garbee <bdale@gag.com>
40657 Date: Thu May 13 15:37:37 2010 -0600
40661 commit f0433c83d76e90d78fb86a1f4a2f145f3c57fb25
40662 Author: Bdale Garbee <bdale@gag.com>
40663 Date: Thu May 13 01:27:39 2010 -0600
40667 commit 0f05cf06e3f1ec510b11d993d9038211ac66c97b
40668 Author: Bdale Garbee <bdale@gag.com>
40669 Date: Wed May 12 19:54:04 2010 -0600
40671 update changelogs for Debian build
40673 commit 6bd85138c1bfbc1d8b78dce1501870a65a64db36
40674 Author: Bdale Garbee <bdale@gag.com>
40675 Date: Wed May 12 19:53:40 2010 -0600
40677 lose the quotes since they apparently aren't necessary
40679 commit d639144b9bb840fbbced199738787ec054eddf12
40680 Author: Bdale Garbee <bdale@gag.com>
40681 Date: Wed May 12 17:04:41 2010 -0600
40683 update changelogs for Debian build
40685 commit ae6854df00579ea1c3486f1bf8f19443d5ac9498
40686 Author: Bdale Garbee <bdale@gag.com>
40687 Date: Wed May 12 17:04:13 2010 -0600
40689 update desktop file for conformance with current standards
40691 commit 7191d74e680a63728f5eb139069a674fef969e6c
40692 Author: Bdale Garbee <bdale@gag.com>
40693 Date: Wed May 12 16:45:00 2010 -0600
40695 update changelogs for Debian build
40697 commit 68eaaa694bb7bf20642ad11eac8a13c1c8e21b7d
40698 Author: Bdale Garbee <bdale@gag.com>
40699 Date: Wed May 12 16:44:14 2010 -0600
40703 commit 9d3d09578381bb6e6f88c39b0e945371bbc22c5a
40704 Author: Bdale Garbee <bdale@gag.com>
40705 Date: Wed May 12 16:34:49 2010 -0600
40707 add desktop file provided by Bob Finch
40709 commit 3cc1dad3b497524ffef61190dd68908cb19e8c35
40710 Author: Bdale Garbee <bdale@gag.com>
40711 Date: Wed May 12 16:28:35 2010 -0600
40713 add initial package build scripts for Arch Linux from Bob Finch
40715 commit 1b8671bd0a00cec6ae4ccf442cd007b18af82fb0
40716 Author: Bdale Garbee <bdale@gag.com>
40717 Date: Sun May 9 01:41:00 2010 -0600
40721 commit 53b9a9bc28a9278249ff37f92110c21380e93cda
40722 Author: Bdale Garbee <bdale@gag.com>
40723 Date: Thu May 6 13:59:23 2010 -0600
40725 update changelogs for Debian build
40727 commit cde60f16f6ab2cdd5010a0e106ae312d144947cf
40728 Author: Bdale Garbee <bdale@gag.com>
40729 Date: Thu May 6 13:58:31 2010 -0600
40731 Revert "Merge remote branch 'remotes/origin/fix-reset'"
40733 This reverts commit 314d27a73c903fef2968dabac3d5313573713460, reversing
40734 changes made to fa77db2ffd8a749c93767db5a6311131e00473ae.
40736 For whatever reason, this is utterly not doing the right things today!
40738 commit 8be04df7e1e0a369ffb1137c6e2ec63585e3c935
40739 Author: Bdale Garbee <bdale@gag.com>
40740 Date: Thu May 6 12:48:00 2010 -0600
40742 update changelogs for Debian build
40744 commit 314d27a73c903fef2968dabac3d5313573713460
40745 Merge: fa77db2 823fc0a
40746 Author: Bdale Garbee <bdale@gag.com>
40747 Date: Thu May 6 12:47:30 2010 -0600
40749 Merge remote branch 'remotes/origin/fix-reset'
40751 commit 823fc0ac27b8df9b4ba1ca0f229b431baf5b46dd
40752 Author: Keith Packard <keithp@keithp.com>
40753 Date: Wed May 5 12:50:39 2010 -0700
40755 Don't change dbg clock while changing reset_n. Use 20ms everywhere
40757 This changes the reset code to be more conservative about changing
40758 things at the same time, and also sets all timings to 20ms to make
40759 debugging with the scope easier.
40761 Signed-off-by: Keith Packard <keithp@keithp.com>
40763 commit fa77db2ffd8a749c93767db5a6311131e00473ae
40764 Author: Bdale Garbee <bdale@gag.com>
40765 Date: Wed May 5 02:34:41 2010 -0600
40767 update changelogs for Debian build
40769 commit 8b6767e24a88482dbd3d4c4c969a0be08917d22b
40770 Author: Keith Packard <keithp@keithp.com>
40771 Date: Wed May 5 01:32:46 2010 -0700
40773 Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
40775 ao_sleep doesn't delay for a specified time interval as much as one
40778 commit e6bb80975fde20928a830170f0821d59a8c72690
40779 Author: Keith Packard <keithp@keithp.com>
40780 Date: Wed May 5 01:31:57 2010 -0700
40782 Fix all stdio reading functions to be __critical
40784 Oh, right SDCC has '__critical' to mark sections of code that need to
40785 run with interrupts disabled; no need to use EA = 0 and EA = 1.
40787 Signed-off-by: Keith Packard <keithp@keithp.com>
40789 commit ff03cdf746b83542ebcca00d32e6cc69ccfc122d
40790 Author: Bdale Garbee <bdale@gag.com>
40791 Date: Wed May 5 01:57:54 2010 -0600
40793 update changelogs for Debian build
40795 commit 8702f497c4278648303eced1aed5bd76d559521a
40796 Author: Bdale Garbee <bdale@gag.com>
40797 Date: Wed May 5 01:57:11 2010 -0600
40799 initial attempt at a telemetrum turn on script .. needs work
40801 commit 01cefa181b04e53c20109ef8f3ffff633744da73
40802 Author: Bdale Garbee <bdale@gag.com>
40803 Date: Wed May 5 01:56:51 2010 -0600
40805 update changelogs for Debian build
40807 commit 45a1c2d2dfb69e5269ef2756fcd0f734b48d41cb
40808 Author: Bdale Garbee <bdale@gag.com>
40809 Date: Wed May 5 01:54:33 2010 -0600
40811 update changelogs for Debian build
40813 commit f7ff3278bb670df59d7425a014cfe8e3718fea3f
40814 Author: Keith Packard <keithp@keithp.com>
40815 Date: Wed May 5 00:44:42 2010 -0700
40817 Disable interrupts while reading from stdin
40819 With multiple input source support, there is a lag between asking a
40820 device if it has data and then waiting for more data to appear. If an
40821 interrupt signalling additional input arrives in this interval, we'll
40822 go to sleep with input available.
40824 This patch uses a big hammer by just disabling interrupts for the
40827 Signed-off-by: Keith Packard <keithp@keithp.com>
40829 commit aa9ff021d683764a43800eaa18ea0c9be5134939
40830 Author: Keith Packard <keithp@keithp.com>
40831 Date: Tue May 4 21:42:54 2010 -0700
40833 Revert "Add optional 's' command to packet slave to enable/disable slave mode"
40835 This reverts commit e7dc7fab787df63a4de72c8450e94092eb04d7db.
40837 This patch didn't work, and magically appears to break flashing TM
40840 commit 8c95f33686f69da717013ec2c25dbcd99c03aa45
40841 Author: Bdale Garbee <bdale@gag.com>
40842 Date: Thu Apr 29 17:48:44 2010 -0600
40844 more text created during SFO->DEN flight
40846 commit af0613ffc178b9b1f011c315923f92f2581fe53e
40847 Author: Bdale Garbee <bdale@gag.com>
40848 Date: Tue Apr 27 00:18:43 2010 -0600
40850 update changelogs for Debian build
40852 commit 99094f02bf4849ba1f6b9842ded6c39d894320f7
40853 Merge: 641e76c 75d8ffd
40854 Author: Bdale Garbee <bdale@gag.com>
40855 Date: Tue Apr 27 00:17:37 2010 -0600
40857 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
40859 commit 641e76c5d419dab057298541b3a7546877643198
40860 Author: Bdale Garbee <bdale@gag.com>
40861 Date: Tue Apr 27 00:17:15 2010 -0600
40863 add some RF usage information from an email reply sent today, and re-indent
40865 commit 75d8ffd4eadf31d50b2f58c021530c17ff1bdc66
40866 Author: Keith Packard <keithp@keithp.com>
40867 Date: Fri Apr 23 13:53:25 2010 -0700
40869 Autodetect flite voice registration function
40871 Old versions of flite exported the function 'register_cmu_us_kal'
40872 while new ones export 'register_cmu_us_kal16'. This patch just checks
40873 which one is available and uses that.
40875 Signed-off-by: Keith Packard <keithp@keithp.com>
40877 commit 97f4874d19ec05c81a04a3ecd06abffcf7fbfafc
40878 Author: Keith Packard <keithp@keithp.com>
40879 Date: Thu Apr 22 16:25:35 2010 -0700
40881 More ALtosUI changes
40883 commit e7dc7fab787df63a4de72c8450e94092eb04d7db
40884 Author: Keith Packard <keithp@keithp.com>
40885 Date: Thu Apr 22 14:53:44 2010 -0700
40887 Add optional 's' command to packet slave to enable/disable slave mode
40889 This option has been selected for teledongle so that you can use slave
40890 mode and hook two teledongles together over the RF link.
40892 Signed-off-by: Keith Packard <keithp@keithp.com>
40894 commit f4383394b5d2b275b21e3ce8040d8cb9e48bb375
40895 Merge: 5f93cf8 c879b17
40896 Author: Bdale Garbee <bdale@gag.com>
40897 Date: Sun Apr 18 08:36:07 2010 -0600
40899 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
40901 commit 5f93cf8c73555f43c14b1b0757f264bde69e9b8a
40902 Author: Bdale Garbee <bdale@gag.com>
40903 Date: Sun Apr 18 08:35:43 2010 -0600
40905 capture work done on SFO->DEN flight
40907 commit c879b178d83c9a9a521f42a960b10e19b11cee92
40908 Author: Keith Packard <keithp@keithp.com>
40909 Date: Sat Apr 10 22:09:57 2010 -0700
40911 Increase reset switch time to 100ms
40913 Signed-off-by: Keith Packard <keithp@keithp.com>
40915 commit b3a2e1221735d54dc3f2b97b4e75ed6f33ab8227
40916 Author: Bdale Garbee <bdale@gag.com>
40917 Date: Sat Apr 10 15:01:14 2010 -0600
40919 update changelogs for Debian build
40921 commit 9394393c24c0a96b94319f2d0aa78fb498a121c9
40922 Author: Keith Packard <keithp@keithp.com>
40923 Date: Fri Apr 9 17:51:01 2010 -0700
40925 Only have the slave return a packet if it received one.
40927 When the receive is aborted to switch modes, it's important to not
40928 immediately re-acquire the radio and try to send a packet as the
40929 aborting thread won't know to kick the receiver again.
40931 This prevents the 'C' command from locking up as it tries to stop the
40932 packet slave before turning on the transmitter.
40934 Signed-off-by: Keith Packard <keithp@keithp.com>
40936 commit ce39372a3aeffff1a08d609e63164a00cf974663
40937 Author: Bdale Garbee <bdale@gag.com>
40938 Date: Fri Apr 9 13:50:49 2010 -0600
40942 commit a832c7e9d9e9e420e1281136188bd53b34c56464
40943 Author: Bdale Garbee <bdale@gag.com>
40944 Date: Fri Apr 9 00:10:03 2010 -0600
40946 update changelogs for Debian build
40948 commit c0ee1ae25e1d18138d8372f47085de48ffada344
40949 Author: Bdale Garbee <bdale@gag.com>
40950 Date: Fri Apr 9 00:09:21 2010 -0600
40952 file changed by auto tools
40954 commit 25e69ebfec94560e0714cf2cc623dc9697b4ea99
40955 Author: Bdale Garbee <bdale@gag.com>
40956 Date: Fri Apr 9 00:08:32 2010 -0600
40958 update changelogs for Debian build
40960 commit ea5d4f01d18d93d032f05933041b7b6881289780
40961 Author: Keith Packard <keithp@keithp.com>
40962 Date: Thu Apr 8 22:45:04 2010 -0700
40964 libflite may forget to reference libasound
40966 commit 4b02f293e9c32a568fad89558274f21157e7d473
40967 Author: Bdale Garbee <bdale@gag.com>
40968 Date: Thu Apr 8 20:08:07 2010 -0600
40970 update changelogs for Debian build
40972 commit 5c3b6e2d1989bcaa19ae3e294f297ec3e5648a53
40973 Author: Bdale Garbee <bdale@gag.com>
40974 Date: Thu Apr 8 19:56:40 2010 -0600
40976 update changelogs for Debian build
40978 commit 01e524f11a67390a8ea1f20aa2d611909b4da363
40979 Author: Bdale Garbee <bdale@gag.com>
40980 Date: Thu Apr 8 19:55:05 2010 -0600
40982 choose a better set of docbook xsl files
40984 commit f93c9bf3695862db31f2c3b3bc5a7bb24ef3766c
40985 Author: Keith Packard <keithp@keithp.com>
40986 Date: Thu Apr 8 17:28:17 2010 -0700
40988 When changing RESET line, delay 20ms
40990 The GPS data sheet suggests a 1uF cap on the reset line to ensure it
40991 is held low long enough for the power supply to come up to voltage. TM
40992 v1.0 loads a 0.001uF cap there, but in case that isn't large enough,
40993 it could be replaced with the larger one. This change makes sure that
40994 even with that larger value, the debugging link will be able to reset
40997 Signed-off-by: Keith Packard <keithp@keithp.com>
40999 commit baaaac499cfbc1286ae55374cfdc796d32983b92
41000 Merge: a4356b9 dec9971
41001 Author: Keith Packard <keithp@keithp.com>
41002 Date: Thu Apr 8 13:31:23 2010 -0700
41004 Merge remote branch 'origin/master'
41006 commit a4356b9bcf679c4d7b88fbbad77a98ecb0f80098
41007 Author: Keith Packard <keithp@keithp.com>
41008 Date: Thu Apr 8 13:30:16 2010 -0700
41010 Use 16-bit flite voice (which appears to have changed symbols recently)
41012 commit 447c121fc1ceb878e45718ad1364a5349965a59a
41013 Merge: 10330d2 53ca3f9
41014 Author: Keith Packard <keithp@keithp.com>
41015 Date: Thu Apr 8 11:46:56 2010 -0700
41017 Merge remote branch 'origin/master' into altosui
41019 commit dec9971d70f17067ba0051206851b49c7604ac85
41020 Author: Bdale Garbee <bdale@gag.com>
41021 Date: Thu Apr 8 12:43:03 2010 -0600
41023 update changelogs for Debian build
41025 commit 6629ec52def8917ad033847812a1adc4c3e9c947
41026 Author: Bdale Garbee <bdale@gag.com>
41027 Date: Thu Apr 8 12:42:47 2010 -0600
41029 lose the url entirely for now
41031 commit a1539a075a0cc79c9122fea878d9a20ee722a18c
41032 Author: Bdale Garbee <bdale@gag.com>
41033 Date: Thu Apr 8 12:41:42 2010 -0600
41035 update changelogs for Debian build
41037 commit 934434ffb3514fe9ff95692784750d7c5217a5d3
41038 Author: Bdale Garbee <bdale@gag.com>
41039 Date: Thu Apr 8 12:41:28 2010 -0600
41043 commit 8a067cd0eebbec313fc39086747ef618f2d1cf37
41044 Author: Bdale Garbee <bdale@gag.com>
41045 Date: Thu Apr 8 12:36:18 2010 -0600
41047 update changelogs for Debian build
41049 commit 05ad58389fa3814ecb56344bf4ec3a3e025920a2
41050 Author: Bdale Garbee <bdale@gag.com>
41051 Date: Thu Apr 8 12:34:54 2010 -0600
41053 need another build dep
41055 commit 6fbdc7037db185f03bd5ff96b9d9320646572df7
41056 Author: Bdale Garbee <bdale@gag.com>
41057 Date: Thu Apr 8 12:28:49 2010 -0600
41059 update changelogs for Debian build
41061 commit 8f1d47e9cd61738e516d15fc97d5730d80611e87
41062 Author: Bdale Garbee <bdale@gag.com>
41063 Date: Thu Apr 8 12:28:20 2010 -0600
41065 update changelogs for Debian build
41067 commit 10330d23518c94a8b791193a97a6cc07b1c9a97c
41068 Author: Keith Packard <keithp@keithp.com>
41069 Date: Tue Apr 6 00:58:00 2010 -0700
41071 Enable telemetry monitoring
41073 Signed-off-by: Keith Packard <keithp@keithp.com>
41075 commit 9e10e43eff9de3f034da49c4f88728fb933f5035
41076 Author: Keith Packard <keithp@keithp.com>
41077 Date: Tue Apr 6 00:56:57 2010 -0700
41079 Tasks may move in task structure as a result of ao_exit
41081 Signed-off-by: Keith Packard <keithp@keithp.com>
41083 commit a7fc7901cd591c93d9d0cffeec2977ebb17554d4
41084 Author: Keith Packard <keithp@keithp.com>
41085 Date: Tue Apr 6 00:55:19 2010 -0700
41087 TD reports "not-connected" when GPS has 0 sats
41089 commit e064d05da87926c19fb665b40fb280fb59328183
41090 Author: Keith Packard <keithp@keithp.com>
41091 Date: Tue Apr 6 00:54:52 2010 -0700
41093 serial port read function cannot be interrupted. poll every 1 second
41095 commit c099a67d9ea37e731e0eca318102560281ac240f
41096 Author: Keith Packard <keithp@keithp.com>
41097 Date: Mon Apr 5 22:42:05 2010 -0700
41099 Interrupt running replay thread when starting another replay
41101 Signed-off-by: Keith Packard <keithp@keithp.com>
41103 commit cc600a0389720bc7e435dbda8bec080ef19e0c58
41104 Author: Keith Packard <keithp@keithp.com>
41105 Date: Mon Apr 5 22:21:46 2010 -0700
41107 Add Linux device discovery
41109 AltosDeviceLinux.java scans /proc to locate suitable devices. This
41110 will be hooked up to the UI shortly.
41112 commit c28646d72005daeadb70b95fd3b0050bd752cc55
41113 Author: Keith Packard <keithp@keithp.com>
41114 Date: Sun Apr 4 20:55:30 2010 -0700
41116 Switch TeleMetrum from v0.2 to v1.0
41118 Signed-off-by: Keith Packard <keithp@keithp.com>
41120 commit d22ba55ae0e056530a727df50f14ad853d79a2c8
41121 Author: Keith Packard <keithp@keithp.com>
41122 Date: Sun Apr 4 20:55:18 2010 -0700
41124 Clean up some altosui comments
41126 commit 6251e89c6eea655769f77bc18e98e79c99cf3cad
41127 Author: Keith Packard <keithp@keithp.com>
41128 Date: Sun Apr 4 19:54:46 2010 -0700
41130 Don't abort the radio when enabling telemetry monitoring
41132 If telemetry monitoring is already on, then there isn't any point, and
41133 if it's not on, then presumably there isn't any radio work to abort.
41135 Signed-off-by: Keith Packard <keithp@keithp.com>
41137 commit b0b99f30c4e00689e9faceb363a5c7284541c6be
41138 Author: Keith Packard <keithp@keithp.com>
41139 Date: Sun Apr 4 19:48:50 2010 -0700
41141 Make ao_radio_idle keep trying to get the radio to idle.
41143 Attempting to abort a radio operation could lead to a hang if the user
41144 of the radio jumped in and started using it again before the task
41145 attempting to abort woke up. This change just keeps smacking the radio
41146 until the radio goes idle long enough to detect it.
41148 commit 0e7abc9fedec568b431c983d3df1b0b29f4f10e3
41149 Author: Keith Packard <keithp@keithp.com>
41150 Date: Sun Apr 4 16:32:04 2010 -0700
41152 Use RXTX for serial comm. Add logdir preference saving
41154 commit c66eebad323e4572bb7cc23bc476ee144f03e9b8
41155 Author: Bdale Garbee <bdale@gag.com>
41156 Date: Sat Apr 3 08:02:44 2010 -0600
41158 rewrite urls in docbook format
41160 commit 3d34c488c5b71020d86f83156fd821fd860bf214
41161 Author: Keith Packard <keithp@keithp.com>
41162 Date: Sat Apr 3 00:02:44 2010 -0700
41166 commit 4bea4c327e002ce8f88218f0d840af7c1521bc35
41167 Author: Keith Packard <keithp@keithp.com>
41168 Date: Fri Apr 2 23:25:02 2010 -0700
41170 Remove unused cell renderer class
41172 commit 4ad062969ae8a608b8428620579bbe114e580a11
41173 Author: Keith Packard <keithp@keithp.com>
41174 Date: Fri Apr 2 23:20:38 2010 -0700
41176 Remove GPS data missing from skytraq. Save max height/accel/speed
41178 commit ebd49d4ec6b0b60c85b2de45cfe2e36add8fe9bf
41179 Author: Keith Packard <keithp@keithp.com>
41180 Date: Fri Apr 2 23:05:40 2010 -0700
41182 Report current gps nsat, not last locked nsat
41184 commit 3f9b66b307ee88172151e3bee58e50f5acbde109
41185 Author: Keith Packard <keithp@keithp.com>
41186 Date: Fri Apr 2 23:00:30 2010 -0700
41188 Clean up GPS data formatting
41190 commit 9cc48698ec14c34d437baad7b6540edc31e9741c
41191 Author: Keith Packard <keithp@keithp.com>
41192 Date: Fri Apr 2 22:47:40 2010 -0700
41196 commit 6d523ee4dad3b9890d3cf05852459101fe7e26ea
41197 Author: Keith Packard <keithp@keithp.com>
41198 Date: Fri Apr 2 21:48:41 2010 -0700
41202 commit caa0bf49668344937483190d1c258bfa32971d19
41203 Author: Keith Packard <keithp@keithp.com>
41204 Date: Fri Apr 2 21:44:00 2010 -0700
41206 Fix up table formatting
41208 commit a579402f428dd6a0529505069d1846f70b83ab5d
41209 Author: Keith Packard <keithp@keithp.com>
41210 Date: Fri Apr 2 18:10:59 2010 -0700
41212 Display table of flight info. gps is not working yet though
41214 commit 65079f84ea64220fa928c3ad96652fed159bf74b
41215 Author: Keith Packard <keithp@keithp.com>
41216 Date: Fri Apr 2 16:07:40 2010 -0700
41218 Steal C code from ao-view
41220 commit 02f2be90879b682b6e648cf2debc83223d127b9d
41221 Author: Keith Packard <keithp@keithp.com>
41222 Date: Fri Apr 2 13:37:52 2010 -0700
41224 Add telem parsing code
41226 commit 8c600abf87c95f8f214b5e56ff6eab955795dff5
41227 Author: Bdale Garbee <bdale@gag.com>
41228 Date: Thu Apr 1 23:56:47 2010 -0600
41230 crudely incorporate "day in the life" info from web page
41232 commit 53ca3f98aeb70cb780031fee788de950e4388cf6
41233 Author: Bdale Garbee <bdale@gag.com>
41234 Date: Thu Apr 1 23:39:42 2010 -0600
41236 tweak copyright assertion
41238 commit 6454e309858aeef7912e862de8632618d89b4205
41239 Author: Keith Packard <keithp@keithp.com>
41240 Date: Thu Apr 1 18:31:14 2010 -0700
41242 Fix windows install file
41244 commit 584ab100640a07dec6e06829e73b7260d17d2232
41245 Author: Keith Packard <keithp@keithp.com>
41246 Date: Thu Apr 1 18:30:56 2010 -0700
41248 Add Windows install .inf file
41250 commit a06bee96e648d9ded8776f3d6cba9505e7be1a60
41251 Author: Keith Packard <keithp@keithp.com>
41252 Date: Wed Mar 31 23:05:03 2010 -0700
41254 Add telemetry data parsing code
41256 commit 7f233369e32c3254165ee251df0a3dbc21ea5a29
41257 Author: Keith Packard <keithp@keithp.com>
41258 Date: Wed Mar 31 13:49:54 2010 -0700
41260 Start adding java-based UI
41262 commit 76768804e68ed09421d7a48cb0b390f102ce2d76
41263 Author: Bdale Garbee <bdale@gag.com>
41264 Date: Tue Mar 30 23:26:35 2010 -0600
41268 commit eb3cc3e9b60ec23acbb7d797affa743d671801ab
41269 Author: Bdale Garbee <bdale@gag.com>
41270 Date: Tue Mar 30 23:19:48 2010 -0600
41272 update changelogs for Debian build
41274 commit 00f49c8fb0aa38331360bdb85c32bcebe60dcdc3
41275 Author: Bdale Garbee <bdale@gag.com>
41276 Date: Tue Mar 30 23:19:07 2010 -0600
41280 commit f03ed0876c67b58624abf0c14bf73444b0322d3c
41281 Author: Bdale Garbee <bdale@gag.com>
41282 Date: Tue Mar 30 23:18:37 2010 -0600
41284 update changelogs for Debian build
41286 commit b41e617080fe825f7810ee5eee52ea37f7618ec6
41287 Merge: 28e40cc df7bda1
41288 Author: Bdale Garbee <bdale@gag.com>
41289 Date: Tue Mar 30 23:15:32 2010 -0600
41291 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
41296 commit 28e40ccfcd80ab8764d4aa235257cea4d193a0c1
41297 Author: Bdale Garbee <bdale@gag.com>
41298 Date: Tue Mar 30 23:14:47 2010 -0600
41300 update changelogs for Debian build
41302 commit 20d4d410e0fc04fe192e309811eed6c0194fa5a8
41303 Author: Bdale Garbee <bdale@gag.com>
41304 Date: Tue Mar 30 23:11:40 2010 -0600
41306 initial harness for documentation
41308 commit 9801ff7de21027935f52ccabaa3ff157e22d21ce
41309 Author: Bdale Garbee <bdale@gag.com>
41310 Date: Mon Mar 15 12:04:18 2010 -0600
41312 move gbp.conf into debian/
41314 commit df7bda1f32b0049c3878c325ea0b55999f3980e3
41315 Merge: 23da4f3 a7042fe
41316 Author: Keith Packard <keithp@keithp.com>
41317 Date: Fri Mar 12 10:38:26 2010 -0800
41319 Merge remote branch 'origin/master'
41321 commit 23da4f3bcdd1d780c9e1f6b68ad2fb309fcae6ba
41322 Author: Keith Packard <keithp@keithp.com>
41323 Date: Fri Mar 12 10:37:32 2010 -0800
41325 Document the ao-dumplog '--remote' flag for radio-link downloads
41327 The --remote (or -R) flag uses TeleDongle to fetch data over the radio
41328 command link from TeleMetrum. It's been there for a while, but the man
41329 page failed to mention it.
41331 Signed-off-by: Keith Packard <keithp@keithp.com>
41333 commit 93df98898f8cd199ae13158bc4f65e3494c954ad
41334 Author: Keith Packard <keithp@keithp.com>
41335 Date: Fri Mar 12 10:35:12 2010 -0800
41337 Round radio calibration value instead of truncating
41339 The radio calibration function in the bring-up code was truncating the
41340 radio calibration value which caused the resulting frequency to
41341 always measure above the target frequency, instead of trying to get as
41342 close as possible. This change will result in a closer frequency
41343 match, but may sometimes be below the target frequency.
41345 Signed-off-by: Keith Packard <keithp@keithp.com>
41347 commit a7042fe7d065d1da1252be5ad43e3c9856214dc8
41348 Author: Bdale Garbee <bdale@Deborah.(none)>
41349 Date: Fri Mar 5 19:11:11 2010 -0800
41351 update changelogs for Debian build
41353 commit eda5e1166a97766aa22561beaa1086ba4e19ee16
41354 Author: Bdale Garbee <bdale@gag.com>
41355 Date: Thu Mar 4 17:33:39 2010 -0700
41357 update changelogs for Debian build
41359 commit 6e61170d42936c18cd6efba6f4c14af616a30745
41360 Author: Keith Packard <keithp@keithp.com>
41361 Date: Sun Feb 28 18:24:46 2010 -0800
41363 Need to duplicate new altitude conversion code in aoview.
41365 Altitude conversion is now done with a smaller table and interpolation
41366 instead of a giant table.
41368 Signed-off-by: Keith Packard <keithp@keithp.com>
41370 commit e4e17e6d3844ae682a0e7a9469a522359bac77b6
41371 Author: Bdale Garbee <bdale@gag.com>
41372 Date: Sat Feb 27 17:36:13 2010 -0700
41374 update changelogs for Debian build
41376 commit a1478f65538fdaac7b58ffbd958a035b74956099
41377 Merge: 901fce5 bbf8c9f
41378 Author: Keith Packard <keithp@keithp.com>
41379 Date: Sat Feb 27 15:19:33 2010 -0800
41381 Merge remote branch 'origin/master'
41383 commit 901fce5fe3e2762406079ecaa787612b5ed4b34a
41384 Author: Keith Packard <keithp@keithp.com>
41385 Date: Sat Feb 27 15:18:47 2010 -0800
41387 Add .gitignore for ao-bringup
41389 Signed-off-by: Keith Packard <keithp@keithp.com>
41391 commit 7aab73a265841aac817ea34235dd1eb819debf76
41392 Author: Keith Packard <keithp@keithp.com>
41393 Date: Sat Feb 27 15:14:04 2010 -0800
41395 Fix up LED colors for each product.
41397 Different products assign different color LEDs to the two available
41398 LED drivers (P1_0, P1_1). Make the LED color pin assignments
41399 per-product (in ao_pins.h), then deal with not always having a green LED.
41401 Signed-off-by: Keith Packard <keithp@keithp.com>
41403 commit 1d6d8d76ec65373ffee70add75d183f5c4168f61
41404 Author: Keith Packard <keithp@keithp.com>
41405 Date: Sat Feb 27 15:11:44 2010 -0800
41407 Eliminate deadlock when writing config from radio link
41409 Writing the 'Saved\r\n' string would fill the packet buffer and cause
41410 a flush to occur, which would need to wait for the radio link to
41411 receive and transmit a packet. The radio link always re-fetches the
41412 radio channel number when lighting up the radio, so it need to look in
41413 the config space. If the config mutex was held by the config writing
41414 process while the radio was trying to get the channel number, then
41415 we'd get a deadlock.
41417 Signed-off-by: Keith Packard <keithp@keithp.com>
41419 commit f1956ebadd7bf46b84a05a0c383b6404ca26b344
41420 Author: Keith Packard <keithp@keithp.com>
41421 Date: Sat Feb 27 15:10:16 2010 -0800
41423 Leave .ihx files in the build directory too - easier to debug that way
41425 sdcdb wants the .ihx and .cdb files in the same directory, so humor it
41426 by copying the .ihx files to the src directory instead of moving them.
41428 Signed-off-by: Keith Packard <keithp@keithp.com>
41430 commit bbf8c9f1748af3f1fac08ddf80ae98da2e9b5727
41431 Author: Bdale Garbee <bdale@gag.com>
41432 Date: Fri Feb 26 15:21:12 2010 -0700
41434 create a turn on script for lighting up TeleDongle v0.2 boards
41436 commit 461d4a1948e112ec7353caf88967391d876469dd
41437 Author: Keith Packard <keithp@keithp.com>
41438 Date: Fri Feb 26 10:33:13 2010 -0800
41442 commit 5d7a3a5fbc0af4621c67a6fd51a9c9d5ae688fa5
41443 Author: Keith Packard <keithp@keithp.com>
41444 Date: Thu Feb 25 16:40:13 2010 -0800
41446 Fix and document the ao-rawload --run flag
41448 This allows ram-based programs to be loaded and executed easily.
41450 Signed-off-by: Keith Packard <keithp@keithp.com>
41452 commit 1e60deca147c85a064719dfad14ccabd1049bbbd
41453 Author: Keith Packard <keithp@keithp.com>
41454 Date: Thu Feb 25 16:33:34 2010 -0800
41456 Allow product names to have suffixes (like board revisions)
41458 When looking for a board by product name, just look at the prefix of
41459 the name instead of requiring an exact match. This will allow products
41460 to have board version suffixes.
41462 Signed-off-by: Keith Packard <keithp@keithp.com>
41464 commit f4d5790a284e2d02dd7568fbca90402fa5ed1aea
41465 Author: Keith Packard <keithp@keithp.com>
41466 Date: Thu Feb 25 16:32:57 2010 -0800
41468 Add ao_radio_xmit to help test boards without flashing them.
41470 Signed-off-by: Keith Packard <keithp@keithp.com>
41472 commit d7d551b0078acb1596a9b9023c3df6dbfa46213c
41473 Author: Bdale Garbee <bdale@gag.com>
41474 Date: Wed Feb 24 17:30:23 2010 -0700
41476 update changelogs for Debian build
41478 commit 2f45953ee54034209a23c254e65da36e44cf075f
41479 Author: Bdale Garbee <bdale@gag.com>
41480 Date: Wed Feb 24 17:29:47 2010 -0700
41484 commit 540f86678853e7ea80ae91f3f2ec0ec88c5b1ca7
41485 Author: Bdale Garbee <bdale@gag.com>
41486 Date: Wed Feb 24 17:27:51 2010 -0700
41490 commit cdccd92f6ed97be7385e84de5694064cb8f43946
41491 Author: Bdale Garbee <bdale@gag.com>
41492 Date: Wed Feb 24 17:25:28 2010 -0700
41494 conditionalize use of git on executability of /usr/bin/git binary
41496 commit 54dd7a200e6956aace5a580d4c4d6a10a13c654b
41497 Author: Bdale Garbee <bdale@gag.com>
41498 Date: Wed Feb 24 17:22:45 2010 -0700
41500 update changelogs for Debian build
41502 commit 4b6b28530206c6fdbe46699b81746fbbcab5b148
41503 Author: Bdale Garbee <bdale@gag.com>
41504 Date: Wed Feb 24 17:22:20 2010 -0700
41508 commit c74958d3e8c5ce8006a9f9f6853238fce0c77432
41509 Author: Bdale Garbee <bdale@gag.com>
41510 Date: Wed Feb 24 17:13:29 2010 -0700
41512 move git-using variable declaration into the prebuild target
41514 commit cf091a7252eba09902a42a3cfe7b4d6a343907ce
41515 Author: Bdale Garbee <bdale@gag.com>
41516 Date: Wed Feb 24 16:44:44 2010 -0700
41518 update changelogs for Debian build
41520 commit deccc10f0305c0cd02bf6317d6dc9d2ae38c3dac
41521 Author: Bdale Garbee <bdale@gag.com>
41522 Date: Wed Feb 24 16:43:32 2010 -0700
41524 add gawk as a build dependency since strtonum is a gawk extension
41526 commit ac45da6e61597dcdb119b976f7301b2cc7fdced4
41527 Author: Bdale Garbee <bdale@gag.com>
41528 Date: Wed Feb 24 14:57:26 2010 -0700
41530 update changelogs for Debian build
41532 commit 24912821b3230b8357b9e0094cd69fa0bccc5513
41533 Author: Bdale Garbee <bdale@gag.com>
41534 Date: Wed Feb 24 14:53:27 2010 -0700
41536 update changelogs for Debian build
41538 commit 82fdbfe1229d1ea5e6906ea240d54b3da73d9a69
41539 Author: Keith Packard <keithp@keithp.com>
41540 Date: Sat Feb 20 21:35:43 2010 -0800
41542 Must install .map files for ao-load to work
41544 ao-load uses the .map files to rewrite the serial number and other
41545 config parameters into the program flash.
41547 Signed-off-by: Keith Packard <keithp@keithp.com>
41549 commit a5215c2bd9249a285fc834db0c453fb3e7daed87
41550 Author: Keith Packard <keithp@keithp.com>
41551 Date: Sat Feb 20 21:20:05 2010 -0800
41553 Add back stack size checking to altos linking phase
41555 This verifies that the stack start specified during the compile
41556 will work with the resulting program
41558 Signed-off-by: Keith Packard <keithp@keithp.com>
41560 commit 18eeb79026f7e5c54bf99435537c024427011a36
41561 Author: Keith Packard <keithp@keithp.com>
41562 Date: Sat Feb 20 21:05:45 2010 -0800
41566 This borrows ideas from the notmuch project to reduce the command line
41567 clutter seen when compiling or linking stuff.
41569 Signed-off-by: Keith Packard <keithp@keithp.com>
41571 commit 004c2a9b7a4b44ef71ca60482573e8e9d8c6ce93
41572 Author: Keith Packard <keithp@keithp.com>
41573 Date: Sat Feb 20 20:36:08 2010 -0800
41575 Update .gitignore files
41577 commit 84c93bb2fc4558a5e4654794ba90e730a84eaf67
41578 Author: Keith Packard <keithp@keithp.com>
41579 Date: Sat Feb 20 20:22:16 2010 -0800
41581 Change altos build process to support per-product compile-time changes
41583 This creates per-product subdirectories and recompiles everything for
41584 each product, allowing per-product compile-time changes for things
41585 like peripheral pin assignments and attached serial devices.
41587 Signed-off-by: Keith Packard <keithp@keithp.com>
41589 commit fd0a42e0e96dcb8ecc9e999f70bcf70692692af9
41590 Author: Keith Packard <keithp@keithp.com>
41591 Date: Sat Feb 20 20:21:07 2010 -0800
41593 Change barometer conversion code to shrink conversion table
41595 commit 876e9a10b9096ead85fbe08ec9a6a0329cf7cbd4
41596 Author: Keith Packard <keithp@keithp.com>
41597 Date: Sat Feb 13 16:42:27 2010 -0800
41599 Log GPS data on pad after boost detect.
41601 This wakes up the two GPS reporting tasks and gets them to report out
41602 any existing GPS data to the log file. To make sure the timestamps in
41603 that GPS data are accurate, this also records GPS time on receipt of
41604 the GPS data instead of when that is logged.
41606 Signed-off-by: Keith Packard <keithp@keithp.com>
41608 commit c83615567b4567f3dc45a7f7b894943b45fbb65c
41609 Author: Keith Packard <keithp@keithp.com>
41610 Date: Sun Feb 7 00:25:22 2010 -0800
41612 Pull in a bit more data for filtering the start of the boost
41614 commit f8967607b3dda0c0ce7afe8bb077da2da5ed3dcd
41615 Author: Keith Packard <keithp@keithp.com>
41616 Date: Sun Feb 7 00:24:56 2010 -0800
41618 Compute daytime using GPS as time base
41620 commit 2a6350149407c7d2e7d143906c40c5e331248aeb
41621 Author: Keith Packard <keithp@keithp.com>
41622 Date: Thu Feb 11 18:48:56 2010 -0800
41624 Missing ao_mutex_put in gps_dump
41626 commit 9856b7c4397afcecc8f541af9a83824e817b3612
41627 Author: Keith Packard <keithp@keithp.com>
41628 Date: Sun Jan 10 16:31:50 2010 -0800
41630 Switch to using internal cc1111 temperature sensor
41632 v0.2 has no temperature sensor, and several of the v0.1 boards didn't
41633 get a temperature sensor loaded. Use the internal temperature sensor
41634 on the cc1111 in all cases instead.
41636 Signed-off-by: Keith Packard <keithp@keithp.com>
41638 commit 0c2533be15858774ef9381aa8c8344356fd5b971
41639 Author: Keith Packard <keithp@keithp.com>
41640 Date: Sat Jan 9 22:06:19 2010 -0800
41642 Force idle mode by shorting the SPI clock to ground at boot time.
41644 This allows you to override the flight mode detection code in case the
41645 accelerometer calibration is broken somehow. Hold the SPI clock shoted
41646 to ground until the LED comes on, then remove it.
41648 Signed-off-by: Keith Packard <keithp@keithp.com>
41650 commit 28346736a7799c0767e54511d9949cd61d35e471
41651 Author: Keith Packard <keithp@keithp.com>
41652 Date: Sat Jan 9 20:57:48 2010 -0800
41654 Add simple gps dump command 'g'
41656 This just dumps out the data in a very simple format to verify the GPS
41659 Signed-off-by: Keith Packard <keithp@keithp.com>
41661 commit a6082a8b4501ac4cb18584ace1f0c40e088e5484
41662 Author: Keith Packard <keithp@keithp.com>
41663 Date: Sat Jan 9 20:57:29 2010 -0800
41665 Remove flash debugging printfs
41667 Signed-off-by: Keith Packard <keithp@keithp.com>
41669 commit 05bb953830604721c9a49dd56256b86f3666b5ff
41670 Author: Keith Packard <keithp@keithp.com>
41671 Date: Sat Jan 9 20:42:57 2010 -0800
41673 Don't set ao_flash_setup_done until we're actually done.
41675 Because we're accessing this variable outside of the mutex, we need to
41676 make sure it isn't set until the data it covers has been initialized.
41678 Signed-off-by: Keith Packard <keithp@keithp.com>
41680 commit 327e5e782958e516a7b7a786ab6c176b0decb8b8
41681 Author: Keith Packard <keithp@keithp.com>
41682 Date: Sat Jan 9 20:04:42 2010 -0800
41684 Dump config block from read/write config and flash_status commands
41686 commit 05e5bb2d330b755967d06fb859585c81f5f5fbb5
41687 Author: Keith Packard <keithp@keithp.com>
41688 Date: Sat Jan 9 19:46:46 2010 -0800
41690 Dump more flash parameters for the flash_status command
41692 commit d4c8895b349998e02e03ed83466a0ca7afb3d99b
41693 Author: Keith Packard <keithp@keithp.com>
41694 Date: Sat Jan 9 17:57:52 2010 -0800
41696 Add 'f' command to display flash status register contents
41698 Signed-off-by: Keith Packard <keithp@keithp.com>
41700 commit c1334f712f01543adb10809bc1a3ca120e27290b
41701 Author: Keith Packard <keithp@keithp.com>
41702 Date: Sat Jan 9 09:55:04 2010 -0800
41704 Add at45db161d.h header file for new flash part.
41706 Forgot to add this when I added the driver.
41708 Signed-off-by: Keith Packard <keithp@keithp.com>
41710 commit a0d4c1b06d27e850d233f8ddf8fe32912bf0ec8f
41711 Author: Keith Packard <keithp@keithp.com>
41712 Date: Sat Jan 9 01:29:41 2010 -0800
41714 Remove green LED and temp sensor from v0.2 code
41716 Signed-off-by: Keith Packard <keithp@keithp.com>
41718 commit dc8d18736239b14c2ec48a40a01515912c5c25e6
41719 Author: Keith Packard <keithp@keithp.com>
41720 Date: Sat Jan 9 01:22:06 2010 -0800
41722 Add AT45DBxx1D driver
41724 This driver supports the AT45DB011D through AT45DB321D DataFlash
41725 parts as found in TeleMetrum v0.2
41727 Signed-off-by: Keith Packard <keithp@keithp.com>
41729 commit 3bab7e66d25988f5d63ec139c8814a85b983f8f3
41730 Author: Keith Packard <keithp@keithp.com>
41731 Date: Sat Dec 19 20:32:18 2009 -0800
41733 Remove dbg driver code from telemetrum/teledongle
41735 The only board with debug outputs is the TI dongle at this point, so
41736 the debug modules were disabled in TM and TD some time
41737 ago. Unfortunately, the code was not removed then.
41739 Signed-off-by: Keith Packard <keithp@keithp.com>
41741 commit eddb82390a0ecb07ef83c04861993842906b03ab
41742 Author: Keith Packard <keithp@keithp.com>
41743 Date: Sat Dec 19 15:31:36 2009 -0800
41745 Ensure that ao_alarm waits at least the specified time
41747 Because the timer tick may happen soon, it's important to delay by
41748 another tick to ensure that we don't wake up early.
41750 Signed-off-by: Keith Packard <keithp@keithp.com>
41752 commit 598d168bd6552c3756e4b0267de44147eadab9f6
41753 Author: Keith Packard <keithp@keithp.com>
41754 Date: Sat Dec 19 14:03:11 2009 -0800
41756 Disable monitor mode before attempting radio test.
41758 If monitor mode is left active, then the radio lock will not be able
41759 to be acquired for the radio test.
41761 Signed-off-by: Keith Packard <keithp@keithp.com>
41763 commit d4cf1446680d8b47396bcda338e8df7af395d102
41764 Author: Bdale Garbee <bdale@gag.com>
41765 Date: Sat Dec 19 13:53:38 2009 -0700
41767 update changelogs for Debian build
41769 commit 10d1bbcd9709a5eee8d50989215242b16feb7232
41770 Author: Keith Packard <keithp@keithp.com>
41771 Date: Sat Dec 19 11:34:16 2009 -0800
41773 Use ao_radio_get/ao_radio_put in packet code.
41775 The ao_radio_get function both acquires the mutex *and* configures the
41776 radio channel and frequency. Failing to use this in the packet code
41777 would leave the radio frequency unconfigured.
41779 Signed-off-by: Keith Packard <keithp@keithp.com>
41781 commit a15abc1882a3bdd2c980eed169f3b80337528390
41782 Author: Bdale Garbee <bdale@gag.com>
41783 Date: Sat Dec 19 12:15:29 2009 -0700
41785 update changelogs for Debian build
41787 commit bbb152c712801653374a8f82869e2e8bf41f7279
41788 Author: Bdale Garbee <bdale@gag.com>
41789 Date: Sat Dec 19 12:05:40 2009 -0700
41791 update changelogs for Debian build
41793 commit 7ac8efea5d60b81adccdc1e38ac4c13facfae7c9
41794 Author: Keith Packard <keithp@keithp.com>
41795 Date: Tue Dec 15 23:58:29 2009 -0800
41797 Add --cal to man page
41799 commit 5481082b18226a0de6b377215b3b330bdbc4a6c6
41800 Author: Keith Packard <keithp@keithp.com>
41801 Date: Sat Dec 5 19:50:38 2009 -0800
41803 Allow radio calibration to be set from ao-load
41805 This moves the initial radio calibration value into const memory where
41806 it will be used if no eeprom configuration value is available, either
41807 on an unprogrammed board with eeprom or a device without an eeprom.
41809 Signed-off-by: Keith Packard <keithp@keithp.com>
41811 commit 46f03ab3145a61139c8ca6fc99e8f2798728b5a9
41812 Author: Keith Packard <keithp@keithp.com>
41813 Date: Sat Dec 5 15:36:12 2009 -0800
41815 Re-order config values. Change frequency to cal
41817 Place more often used values at top, and consistently call the radio
41818 value 'calibration' instead of 'frequency'.
41820 Signed-off-by: Keith Packard <keithp@keithp.com>
41822 commit bf29a62532fec12e6af2d2f3a6624882c863e933
41823 Author: Bdale Garbee <bdale@gag.com>
41824 Date: Sat Dec 5 11:03:42 2009 -0700
41826 update changelogs for Debian build
41828 commit cd49847f3125df1733f298b56a43e8027ab5ce05
41829 Author: Keith Packard <keithp@keithp.com>
41830 Date: Fri Dec 4 23:38:26 2009 -0800
41832 Add radio calibration configuration.
41834 The crystal we use is only good for 20ppm, which generates a fairly
41835 significant error bounds at our RF frequency. This commit adds a
41836 configuration variable that sets the RF frequency control variable so
41837 that the output frequency can be adjusted.
41839 Signed-off-by: Keith Packard <keithp@keithp.com>
41841 commit c671a3f31f54715284beef5baa4a72ca922e4018
41842 Author: Keith Packard <keithp@keithp.com>
41843 Date: Fri Dec 4 23:36:54 2009 -0800
41845 Make ao_cmd_decimal produce both 32 and 16 bit values.
41847 ao_cmd_lex_u32 is produced in addition to ao_cmd_lex_i so that
41848 functions can easily read 32-bit values from the command line.
41850 Signed-off-by: Keith Packard <keithp@keithp.com>
41852 commit e6d6ad66ce177eb6e49eaa04b1ecc6426f4bbdbf
41853 Author: Keith Packard <keithp@keithp.com>
41854 Date: Fri Dec 4 23:35:40 2009 -0800
41856 Remove send_serial and serial_baud commands.
41858 No longer useful, and they take up space.
41860 Signed-off-by: Keith Packard <keithp@keithp.com>
41862 commit ce7325cefbbe91054c1e8174cf40a6c687f6694b
41863 Author: Bdale Garbee <bdale@gag.com>
41864 Date: Fri Dec 4 21:02:07 2009 -0700
41866 update changelogs for Debian build
41868 commit 9a1d7dd78c07d18954ef620b6ed25d6701df21e2
41869 Author: Keith Packard <keithp@keithp.com>
41870 Date: Fri Dec 4 14:35:39 2009 -0800
41872 Change default callsign to "N0CALL"
41874 commit 291e2004e77debdc1543912cf11043c849305de8
41875 Author: Bdale Garbee <bdale@gag.com>
41876 Date: Thu Nov 26 11:18:37 2009 -0700
41878 update changelogs for Debian build
41880 commit 40533095a96b6c6364eebdc4b7d53c4eabe72e9a
41881 Author: Bdale Garbee <bdale@gag.com>
41882 Date: Thu Nov 26 11:16:04 2009 -0700
41884 update changelogs for Debian build
41886 commit ab1075e7219b02258c1613d93379582be4168947
41887 Author: Bdale Garbee <bdale@gag.com>
41888 Date: Thu Nov 26 11:15:13 2009 -0700
41890 change home URL in control file to be the AltOS page
41892 commit d34dcc5f3616e59ee90ed172770fe2a3eb1e0cac
41893 Author: Bdale Garbee <bdale@gag.com>
41894 Date: Thu Nov 26 10:40:07 2009 -0700
41896 fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
41898 commit ea40561b36519a5dcabedabe18672b79ea5e9993
41899 Author: Bdale Garbee <bdale@gag.com>
41900 Date: Sun Nov 22 10:18:44 2009 -0700
41902 update changelogs for Debian build
41904 commit d6ba07e885bdc62ba64719c9d8cc42fcecbcb09d
41905 Author: Keith Packard <keithp@keithp.com>
41906 Date: Sun Nov 22 01:10:44 2009 -0800
41908 Automatically extract flight number for eeprom and telem filenames.
41910 Extract flight number from either telemetry or eeprom files and use
41911 that in the resulting filenames. To ensure that files remain unique,
41912 add a new field, -seq-%03d. This is appended only when the sequence
41913 number is non-zero as it shouldn't occur in normal usage.
41915 This also eliminates some duplicate filename creation code in the
41916 library and aoview sources.
41918 Signed-off-by: Keith Packard <keithp@keithp.com>
41920 commit 06cebd1026dc1bd6ee51526fa2d02905df3b3b37
41921 Author: Keith Packard <keithp@keithp.com>
41922 Date: Sun Nov 22 00:52:58 2009 -0800
41924 ao-postflight: don't try to use missing gps sat data
41926 Signed-off-by: Keith Packard <keithp@keithp.com>
41928 commit a9ada1b538af3308e1b22bd024d9204521184173
41929 Author: Keith Packard <keithp@keithp.com>
41930 Date: Sat Nov 21 22:12:21 2009 -0800
41932 ao-postflight: compute barometric alt for each GPS position
41934 Print that to the --gps file, and use that in the --kml file for the
41935 altitude. Gives a very different picture of our flight tracks,
41936 presumably far more accurate (at least in altitude).
41938 Signed-off-by: Keith Packard <keithp@keithp.com>
41940 commit b84b634d9ae8ce6ab1c02833a3ed8514404e1ca3
41941 Author: Keith Packard <keithp@keithp.com>
41942 Date: Sat Nov 21 22:11:45 2009 -0800
41944 Don't crash if --plot isn't passed on ao-postflight command line
41946 Crashing is not nice.
41948 Signed-off-by: Keith Packard <keithp@keithp.com>
41950 commit 2d77c18b15834046b7b79d49d87211828f2409e9
41951 Author: Keith Packard <keithp@keithp.com>
41952 Date: Sat Nov 21 21:10:09 2009 -0800
41954 Convert telemetry file GPS satellite information in cc_log_read
41956 The satellite info wasn't being correctly converted from telemetry
41957 files to the data log structure, so ao-postflight was not seeing it.
41959 Signed-off-by: Keith Packard <keithp@keithp.com>
41961 commit 1e7fb61700f1f6f2ed5fdbc4380d7187b0cd187b
41962 Author: Keith Packard <keithp@keithp.com>
41963 Date: Sat Nov 21 21:09:03 2009 -0800
41965 Fix --plot arg handling. Add -all option.
41967 The --plot file name handing is special as the library wants a
41968 filename instead of a stdio file pointer.
41970 Add a --all option that just creates all of the possible outputs.
41972 Signed-off-by: Keith Packard <keithp@keithp.com>
41974 commit 199f0cecae22645140185238682b9e1aba0e5715
41975 Author: Keith Packard <keithp@keithp.com>
41976 Date: Sat Nov 21 20:36:20 2009 -0800
41978 Make TD print 0000-00-00 for invalid dates.
41980 This 'shouldn't' happen, but in case it does, I want to know about it.
41982 Signed-off-by: Keith Packard <keithp@keithp.com>
41984 commit 238d03462a56dc1b7c871608cb00f961a88c1b97
41985 Author: Keith Packard <keithp@keithp.com>
41986 Date: Sat Nov 21 20:35:22 2009 -0800
41988 Make ao-postflight create filenames using input filenames.
41990 Instead of requiring the user to provide names for the various output
41991 options, just create them from the input name by replacing the extension.
41993 Signed-off-by: Keith Packard <keithp@keithp.com>
41995 commit 1a3b4c02a01187f8b7b9a9c97712476d0007ab35
41996 Author: Keith Packard <keithp@keithp.com>
41997 Date: Sat Nov 21 19:52:26 2009 -0800
41999 Document ao-postflight --gps and --kml options.
42001 These were missing from the man page, but included in the --help output.
42003 Signed-off-by: Keith Packard <keithp@keithp.com>
42005 commit 80b23f3044a654d61212891a61fadb8a3a4e5572
42006 Author: Keith Packard <keithp@keithp.com>
42007 Date: Sat Nov 21 18:57:45 2009 -0800
42009 Decode HDOP data from skytraq GPS
42011 The hdop data was getting dropped on the floor, but is rather useful
42012 when deciding if the GPS position is crazy or not. This reports HDOP *
42013 5 (giving a useful range of .2-50).
42015 Signed-off-by: Keith Packard <keithp@keithp.com>
42017 commit 8f036ee7cd30ce3ed2e5cc8501914a4c19b73875
42018 Author: Bdale Garbee <bdale@gag.com>
42019 Date: Fri Nov 20 13:19:02 2009 -0700
42021 update changelogs for Debian build
42023 commit 87e6f3e5c1688503ab8595912d8d6eb7139830b7
42024 Author: Keith Packard <keithp@keithp.com>
42025 Date: Fri Nov 20 12:16:37 2009 -0800
42027 Eliminate SiRF state values from ao-view.
42029 With Skytraq not having any visible GPS state information, just
42030 remove this from the display.
42032 Signed-off-by: Keith Packard <keithp@keithp.com>
42034 commit 8065b8146a31438e66f83c13b99281ec47439a73
42035 Author: Keith Packard <keithp@keithp.com>
42036 Date: Fri Nov 20 11:56:48 2009 -0800
42038 Add GPS date/time output to ao-postflight.
42040 GPS date/time information was already being stored in the log, it just
42041 wasn't getting displayed by ao-postflight.
42043 Signed-off-by: Keith Packard <keithp@keithp.com>
42045 commit 6894541e0ee144bfc689cc02d4ed333711d3b500
42046 Author: Keith Packard <keithp@keithp.com>
42047 Date: Fri Nov 20 11:55:28 2009 -0800
42049 Reduce igniter firing time from 500ms to 50ms.
42051 Given that the system will brown-out with the longer pulse, it doesn't
42052 make sense to even try; failure at 50ms probably indicates a short.
42054 Signed-off-by: Keith Packard <keithp@keithp.com>
42056 commit b75aa1c825b84bd7fa1578320fbc7e904c373a7d
42057 Author: Bdale Garbee <bdale@gag.com>
42058 Date: Thu Nov 19 21:43:13 2009 -0700
42060 fix typo in comment
42062 commit c2f661b75ec035f6a3f700962290ef297f9ab0af
42063 Author: Bdale Garbee <bdale@gag.com>
42064 Date: Fri Nov 20 11:44:06 2009 -0700
42066 update changelogs for Debian build
42068 commit b0d7e3f9c9322542e9b649bb6ad7f7e5bb99dffa
42069 Author: Keith Packard <keithp@keithp.com>
42070 Date: Sun Nov 15 16:20:18 2009 -0800
42072 Stop using SiRF state info.
42074 With the switch to the skytraq GPS unit, we don't have the same level
42075 of detail in the GPS stream, so stop reporting that in the telemetry
42076 stream, in the UI and writing it to eeprom.
42078 Signed-off-by: Keith Packard <keithp@keithp.com>
42080 commit 524665fc221b0d483453c67b7211e282cebc8980
42081 Author: Keith Packard <keithp@keithp.com>
42082 Date: Sun Nov 15 16:04:41 2009 -0800
42084 Add date to GPS data, captured from GPRMC packet.
42086 Pull the date out of the GPS stream and send it over the telemetry
42087 link and write it to the eeprom.
42089 Signed-off-by: Keith Packard <keithp@keithp.com>
42091 commit 3ee279ba76c2a79d142c466f19ef758cf4c01d70
42092 Author: Keith Packard <keithp@keithp.com>
42093 Date: Sun Nov 15 15:59:01 2009 -0800
42095 Add flight number to telemetry stream.
42097 This makes it easier to tie the telemetry and eeprom files together as
42098 they're now both labeled with serial and flight numbers, which should
42101 Signed-off-by: Keith Packard <keithp@keithp.com>
42103 commit 6391c89bd5b89f5f46255b8365c658a873e5959a
42104 Author: Keith Packard <keithp@keithp.com>
42105 Date: Sun Nov 15 15:53:01 2009 -0800
42107 Switch order of serial/flight in ao-postflight summary
42109 commit 9b06e294e2777f69bcf5e98789c3f5477097d53b
42110 Author: Keith Packard <keithp@keithp.com>
42111 Date: Sun Nov 15 15:51:58 2009 -0800
42113 Enable telemetry receive in ao_view
42115 commit 4cffc9c4b079e39c8196ddbaf91129cda6df7f8b
42116 Author: Keith Packard <keithp@keithp.com>
42117 Date: Sat Nov 14 22:24:37 2009 -0800
42119 Share telemetry parsing code in cc library.
42121 ao-view had a private copy of the telemetry parsing code which
42122 included the ability to parse the newer version of that file. Those
42123 changes have been moved to the library version and the private copy removed.
42125 Signed-off-by: Keith Packard <keithp@keithp.com>
42127 commit 0e0db8ca3af4c07bae909938486766c646bf580b
42128 Author: Keith Packard <keithp@keithp.com>
42129 Date: Sat Nov 14 22:24:09 2009 -0800
42131 Provide a dummy 'uninstall' target in the src directory.
42133 Signed-off-by: Keith Packard <keithp@keithp.com>
42135 commit 1c654a9369294c9b8066c33f91161d8005b96680
42136 Author: Keith Packard <keithp@keithp.com>
42137 Date: Sat Nov 14 22:17:24 2009 -0800
42139 Loosen tolerances for main->landed transition
42141 Detecting that the rocket has landed is required for the system to
42142 flush the eeprom log and re-enable the RDF beacon. This patch changes
42143 the landed state entry requirements for the accelerometer to require
42144 only that the accelerometer stay within a quarter of a g (down from
42145 1/10g) and changes the testing interval from 20 seconds to 5
42148 The requirement that the barometric altitude be within 1000m of the
42149 launch altitude and that the barometer change by no more than 0.05kPa
42152 Signed-off-by: Keith Packard <keithp@keithp.com>
42154 commit 03092d1a72a9651711e22c58dca6d6aba5705c5e
42155 Author: Keith Packard <keithp@keithp.com>
42156 Date: Sat Nov 14 16:35:12 2009 -0800
42158 ao-postflight: fix sloppy gps sat data realloc code (was crashing).
42160 Realloc'ing the wrong data, and failing to set the realloc'ed size was
42161 causing ao-postflight to crash while reading long logs.
42163 Signed-off-by: Keith Packard <keithp@keithp.com>
42165 commit adf656192441eb7f44792955c86e469145477e29
42166 Author: Keith Packard <keithp@keithp.com>
42167 Date: Thu Nov 5 22:11:59 2009 -0800
42169 Return radio to telemetry settings when packet system closed.
42171 To receive telemetry after disabling the packet system, the radio must
42172 be reconfigured for telemetry mode.
42174 Signed-off-by: Keith Packard <keithp@keithp.com>
42176 commit 83afdbdc154fe013bfe35ce5ecf1d61570b04ed6
42177 Author: Keith Packard <keithp@keithp.com>
42178 Date: Thu Nov 5 21:45:00 2009 -0800
42180 Add reboot command.
42182 This resets the processor using the watchdog timer.
42184 Signed-off-by: Keith Packard <keithp@keithp.com>
42186 commit 0358988ac0ee25a564d48af79b1c3fb0c0fe0a88
42187 Author: Keith Packard <keithp@keithp.com>
42188 Date: Thu Nov 5 21:44:31 2009 -0800
42190 Add Watchdog Timer Control register definitions
42192 Signed-off-by: Keith Packard <keithp@keithp.com>
42194 commit 4114210e0b813f4af99d0cb7755ad2ac2c4b120e
42195 Author: Keith Packard <keithp@keithp.com>
42196 Date: Thu Nov 5 21:43:21 2009 -0800
42198 Move ao_match_word from ao_ignite.c to ao_cmd.c
42200 This is a generally useful command line utility.
42202 Signed-off-by: Keith Packard <keithp@keithp.com>
42204 commit 5a79a04ddb0b3ee64de34e366f71a0f6db509c01
42205 Author: Keith Packard <keithp@keithp.com>
42206 Date: Wed Nov 4 21:59:51 2009 -0800
42208 Stop recording in ao-dumplog after receiving an invalid block
42210 If no samples in a block are valid, assume the flight log is over.
42212 Signed-off-by: Keith Packard <keithp@keithp.com>
42214 commit 843ee489aac34ad6d81f55f1c85fb9eecc42d86b
42215 Author: Keith Packard <keithp@keithp.com>
42216 Date: Wed Nov 4 21:59:12 2009 -0800
42218 Flush pending input when switching to remote packet mode
42220 Any pending input would just confuse the application, so pull it off
42221 the link and dump it.
42223 Signed-off-by: Keith Packard <keithp@keithp.com>
42225 commit 036400a2db303f3db3be7cc0426f88359c6bd2b1
42226 Author: Keith Packard <keithp@keithp.com>
42227 Date: Wed Nov 4 21:42:51 2009 -0800
42229 Explicitly use USB I/O routines in packet code
42231 Using the implicit stdio functions (putchar/getchar/flush) would
42232 result in essentially random redirection of each, depending on whether
42233 the packet code had characters available when getchar was called. This
42234 would cause lockups in putchar.
42236 Signed-off-by: Keith Packard <keithp@keithp.com>
42238 commit 3ece984f4d72b4f720a5efdfaad7cff77a93d676
42239 Author: Keith Packard <keithp@keithp.com>
42240 Date: Wed Nov 4 21:32:07 2009 -0800
42242 In USB pollchar, wait for packet before re-checking USB out len
42244 This probably wouldn't actually cause a problem, but it seems more
42245 reliable to wait for a packet interrupt before re-reading the packet
42246 OUT len register. This could avoid spinning while waiting for a USB
42247 packet, which seems like a good thing.
42249 Signed-off-by: Keith Packard <keithp@keithp.com>
42251 commit bc62bb254085cc705203b57260c04ac5e14c6611
42252 Author: Keith Packard <keithp@keithp.com>
42253 Date: Wed Nov 4 21:29:37 2009 -0800
42255 In packet master, move USB flush from packet thread to echo thread
42257 This keeps the packet thread from blocking on USB and also makes the
42258 flush happen after every packet (slightly more USB traffic, but
42259 packets are slow anyway).
42261 Signed-off-by: Keith Packard <keithp@keithp.com>
42263 commit 27ebaf8e13aed06bb1ea6e770f767495a02be6c5
42264 Author: Keith Packard <keithp@keithp.com>
42265 Date: Tue Nov 3 01:27:37 2009 -0800
42267 Add ability to dump eeprom data over radio link.
42269 This adds a '-R' option to ao-dumplog to redirect the connection
42270 through a USB attached TeleDongle over the radio link to a remote
42273 Signed-off-by: Keith Packard <keithp@keithp.com>
42275 commit 1de322b960005c9a16051afa1881fadb00f4bcd6
42276 Author: Keith Packard <keithp@keithp.com>
42277 Date: Tue Nov 3 00:40:38 2009 -0800
42279 Pass accel calibration over telemetry stream. Telemetry data format change.
42281 This allows the ground station to convert the accelerometer sensor
42282 values into acceleration and speed data. This requires a new telemetry
42283 data structure, and so TeleMetrum and TeleDongle units must be updated
42284 synchronously. ao-view will parse either telemetry stream, and the
42285 serial format from TeleDongle now has a version number to allow for
42288 Signed-off-by: Keith Packard <keithp@keithp.com>
42290 commit b529e5e8998702986909111a457f3ce9932e1ccf
42291 Author: Keith Packard <keithp@keithp.com>
42292 Date: Mon Nov 2 23:48:29 2009 -0800
42294 ao_flight_test was using accel value for pressure too
42296 commit f57bea012d4fbca097df0d98fcd30eb4abd9701a
42297 Author: Keith Packard <keithp@keithp.com>
42298 Date: Mon Nov 2 21:47:41 2009 -0800
42300 Reformat ADC values to show all 16 bits
42302 commit 79718e798e96567f0ba11c61f187e432fdcf95ee
42303 Author: Keith Packard <keithp@keithp.com>
42304 Date: Mon Nov 2 21:48:16 2009 -0800
42308 commit a4137263b69864c524d39c6ff88a0225fd06e79b
42309 Author: Keith Packard <keithp@keithp.com>
42310 Date: Mon Nov 2 21:47:15 2009 -0800
42314 commit 47f510464907d2b9488109c96ade87a41d878842
42315 Author: Keith Packard <keithp@keithp.com>
42316 Date: Mon Nov 2 21:46:39 2009 -0800
42318 Remove "l" command as ao-dumplong no longer uses it
42320 commit 144db05f6b286a0450d486f69ce192632a2c0656
42321 Author: Keith Packard <keithp@keithp.com>
42322 Date: Mon Nov 2 21:38:18 2009 -0800
42324 Add two-point accelerometer calibration.
42326 Calibration now uses two values, one upside right and the other upside
42327 down instead of a single horizontal value. This allows the use of
42328 other accelerometers and compensates for variations in the divider
42329 circuit to provide more accurate data.
42331 commit 17611788aadc9460287145a340a7c18bf63766aa
42332 Author: Bdale Garbee <bdale@gag.com>
42333 Date: Mon Nov 2 16:54:06 2009 -0700
42335 update changelogs for Debian build
42337 commit 7db9d86178ecfd58cc1c17ac9fcbdcfd2f13aaec
42338 Merge: b219801 f9de200
42339 Author: Keith Packard <keithp@keithp.com>
42340 Date: Mon Nov 2 15:47:40 2009 -0800
42342 Merge remote branch 'origin/master'
42344 commit b219801fb0e5eaff7778d21701da977104522da3
42345 Author: Keith Packard <keithp@keithp.com>
42346 Date: Mon Nov 2 15:45:58 2009 -0800
42348 Add ao_usb_pollchar to ao.h
42350 commit b92333ff5e75bf96804359e9fbf464d3b518bd95
42351 Author: Keith Packard <keithp@keithp.com>
42352 Date: Mon Nov 2 15:45:42 2009 -0800
42354 Disable interrupts while removing tasks from task list
42356 commit d519564fd08d2defe1211de83ccbdfa3c7cfe702
42357 Author: Keith Packard <keithp@keithp.com>
42358 Date: Mon Nov 2 15:45:07 2009 -0800
42360 Add more docs to the README file
42362 commit f9de20000794c97a04d5bc2476191864bd2af371
42363 Author: Bdale Garbee <bdale@gag.com>
42364 Date: Mon Nov 2 16:00:11 2009 -0700
42366 update changelogs for Debian build
42368 commit 127c3125e5a4b86b8f304bc2889e313688c3d83e
42369 Author: Bdale Garbee <bdale@gag.com>
42370 Date: Mon Nov 2 15:59:12 2009 -0700
42372 update changelogs for Debian build
42374 commit 6b1e77569e2fed3c44606ed268421df5d3ed4020
42375 Author: Bdale Garbee <bdale@gag.com>
42376 Date: Mon Nov 2 15:57:41 2009 -0700
42378 update changelogs for Debian build
42380 commit 8203bfa58af32a1d07a44c1c151b200df0b65f15
42381 Author: Bdale Garbee <bdale@gag.com>
42382 Date: Mon Nov 2 15:56:42 2009 -0700
42384 de-version the libreadline-dev build dependency
42386 commit 0b483233118673cbc2cda1be6acd379df82bc95a
42387 Merge: ca5d323 550482d
42388 Author: Keith Packard <keithp@keithp.com>
42389 Date: Sun Nov 1 20:59:02 2009 -0800
42391 Merge remote branch 'origin/master' into skytraq
42393 commit ca5d323a3d206050d95f52a61e92c69e1f54e7b5
42394 Author: Keith Packard <keithp@keithp.com>
42395 Date: Sun Nov 1 20:57:03 2009 -0800
42397 Enable packet-based communcation to command processor
42399 This splits the packet code into master/slave halves and hooks the
42400 slave side up to the getchar/putchar/flush logic in ao_stdio.c
42402 Signed-off-by: Keith Packard <keithp@keithp.com>
42404 commit 6c1a9ce16b966a21c885bf3be31cbcb85368b3fa
42405 Author: Keith Packard <keithp@keithp.com>
42406 Date: Sat Oct 31 01:30:22 2009 -0700
42408 No need to wakeup &ao_tick_count now
42410 commit cd0d495d7ef276956e730196476daa70a4359918
42411 Author: Keith Packard <keithp@keithp.com>
42412 Date: Sat Oct 31 01:20:26 2009 -0700
42414 Poke master to speed up packet rate when things are busy
42416 commit 442b1ef18c8320d4e5329dc92bb5268a36058fc5
42417 Author: Keith Packard <keithp@keithp.com>
42418 Date: Sat Oct 31 01:19:41 2009 -0700
42420 Use ao_alarm for ao_delay so it can be easily interrupted
42422 commit 4f7ed9ff484778381db647c27d2a34d0cadec41e
42423 Author: Keith Packard <keithp@keithp.com>
42424 Date: Fri Oct 30 23:53:03 2009 -0700
42426 Do more flushing in packet test code
42428 commit 6a7aa1810a90a9216160aec55ec4bd02b3240e1b
42429 Author: Keith Packard <keithp@keithp.com>
42430 Date: Fri Oct 30 23:52:44 2009 -0700
42434 commit bf65e0b2a1299b49adc2d339ab9d9c7599aded9e
42435 Author: Keith Packard <keithp@keithp.com>
42436 Date: Fri Oct 30 23:52:22 2009 -0700
42438 Send SYN packet to set sequence numbers
42440 commit d46797e5c08d4955d516458185e2cfb51ee2d567
42441 Author: Keith Packard <keithp@keithp.com>
42442 Date: Fri Oct 30 23:51:38 2009 -0700
42444 Use ao_radio_done to wait for TX to completely finish with packet
42446 commit c5ec6fcfa1bd17aad0f85d2fbe603f1d125836e6
42447 Author: Keith Packard <keithp@keithp.com>
42448 Date: Fri Oct 30 23:50:54 2009 -0700
42450 Switch packet code from timer thread to ao_alarm
42452 commit b428faf74ae145126ec1da972028fcfe0b4b2b18
42453 Author: Keith Packard <keithp@keithp.com>
42454 Date: Fri Oct 30 23:48:36 2009 -0700
42456 Remove reason from ao_dma_abort
42458 commit 73db30b2f9128c37dc7fa075793a8862814ce044
42459 Author: Keith Packard <keithp@keithp.com>
42460 Date: Fri Oct 30 23:46:21 2009 -0700
42464 commit 251b0971f049cbf2f8db79a32729d47441ce65f3
42465 Author: Keith Packard <keithp@keithp.com>
42466 Date: Fri Oct 30 23:45:43 2009 -0700
42468 Wait for TX to finish sending data
42470 commit 9b31f07fe3556896b3e997bba156e30ef5777a80
42471 Author: Keith Packard <keithp@keithp.com>
42472 Date: Fri Oct 30 23:43:52 2009 -0700
42474 Add radio carrier command
42476 commit 7b14c3e609749f4fc00dbd660541375048535218
42477 Author: Keith Packard <keithp@keithp.com>
42478 Date: Fri Oct 30 16:39:15 2009 -0700
42480 Initial packet bits. Just testing transmission
42482 commit 690fc263516d8beb6b24e86fbcd6588f42ce4e5c
42483 Author: Keith Packard <keithp@keithp.com>
42484 Date: Wed Oct 21 17:18:49 2009 +0900
42486 Add keyhole-markup generation for ao-postflight.
42488 This lets you see the flight path in googleearth.
42490 Signed-off-by: Keith Packard <keithp@keithp.com>
42492 commit b657aa209b9ea3b3efd33a940283b3ba60a169af
42493 Author: Keith Packard <keithp@keithp.com>
42494 Date: Fri Oct 16 12:59:53 2009 +0900
42496 Add ao_wake_task and ao_exit
42498 ao_wake_task signals a specific task to wake up.
42499 ao_exit terminates the current task.
42501 Signed-off-by: Keith Packard <keithp@keithp.com>
42503 commit d709a0688eff84e25e24d755850ef045d6b0c3de
42504 Author: Keith Packard <keithp@keithp.com>
42505 Date: Fri Oct 16 12:56:45 2009 +0900
42507 Save some DSEG space by marking cmd functions __reentrant
42509 __reentrant causes the compiler to place args and locals on the stack
42510 instead of in the data segment.
42512 Signed-off-by: Keith Packard <keithp@keithp.com>
42514 commit 550482d953c491a5ede9f2d243493afb13289898
42515 Author: Bdale Garbee <bdale@gag.com>
42516 Date: Mon Oct 12 16:58:46 2009 -0600
42518 update changelogs for Debian build
42520 commit 2de548f45d0f50b558acc83f57e1e2fc1223ab92
42521 Author: Bdale Garbee <bdale@gag.com>
42522 Date: Mon Oct 12 16:58:19 2009 -0600
42524 oops, forgot to specify the repo to push to
42526 commit 68008ac11c2735ca53a1b474324df43f2f1d5cdd
42527 Author: Bdale Garbee <bdale@gag.com>
42528 Date: Mon Oct 12 16:57:33 2009 -0600
42530 update changelogs for Debian build
42532 commit 513328ac5f7c25f9ee144ab6befbea60d69eed1a
42533 Author: Bdale Garbee <bdale@gag.com>
42534 Date: Mon Oct 12 16:56:50 2009 -0600
42536 automate push of updated and tagged master branch during debian/rules prebuild
42538 commit 67bf7d388a6dd2dbf65575bf4f0423ad355b4f2f
42539 Author: Bdale Garbee <bdale@gag.com>
42540 Date: Mon Oct 12 16:54:44 2009 -0600
42542 update changelogs for Debian build
42544 commit 23bc21a93ccb9f35917f283ac5df6ce0870df71a
42545 Author: Bdale Garbee <bdale@gag.com>
42546 Date: Mon Oct 12 16:54:16 2009 -0600
42548 undue damage from partial build
42550 commit 7da56ad8576ef212ffb6cb573bdaf578453e3fe0
42551 Author: Bdale Garbee <bdale@gag.com>
42552 Date: Mon Oct 12 16:52:52 2009 -0600
42554 add support for tagging git repository on each Debian package build
42556 commit 8d4aa4ee54f85f4951cdd7293d58aaa405cfcdc5
42557 Author: Bdale Garbee <bdale@gag.com>
42558 Date: Mon Oct 12 16:49:34 2009 -0600
42560 update changelogs for Debian build
42562 commit 241a860fe856b1dfad6e792736313648300d5c24
42563 Author: Bdale Garbee <bdale@gag.com>
42564 Date: Mon Oct 12 16:48:43 2009 -0600
42566 flush repetitive junk out of debian/changelog, and update the prebuild target
42567 in debian/rules to put git commit details into the Debian changelog
42569 commit 6c4cdc927b43736b39be29d23ac3dc723f69e4d6
42570 Author: Bdale Garbee <bdale@gag.com>
42571 Date: Mon Oct 12 15:57:19 2009 -0600
42573 update changelogs for Debian build
42575 commit c57bd7fd2f80e50b0b4c87fccb024ab07c93773d
42576 Merge: adf8764 2b76572
42577 Author: Bdale Garbee <bdale@gag.com>
42578 Date: Mon Oct 12 15:57:08 2009 -0600
42580 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42582 commit 69b6f6bb465163cf767bb68e0e4a716d8ad2b39c
42583 Merge: bc77da6 2b76572
42584 Author: Keith Packard <keithp@keithp.com>
42585 Date: Sat Oct 10 17:16:21 2009 -0700
42587 Merge branch 'master' into skytraq
42589 commit 2b765728ce177e26899f6feef00bfdf6aeaf2678
42590 Author: Keith Packard <keithp@keithp.com>
42591 Date: Sat Oct 10 17:15:38 2009 -0700
42593 Add apogee igniter delay.
42595 Provide for a delay after apogee before the drogue charge is
42596 fired. This allows TM to be used as a back-up altimeter.
42598 Signed-off-by: Keith Packard <keithp@keithp.com>
42600 commit bc77da68c9cb7d4cca483eadbbb7e9ccf71c0060
42601 Merge: 46cccf6 8f7ea3d
42602 Author: Keith Packard <keithp@keithp.com>
42603 Date: Sat Oct 10 15:09:48 2009 -0700
42605 Merge branch 'master' into skytraq
42607 commit 8f7ea3de7037f40b0ff462b60d503c19431ae62b
42608 Author: Keith Packard <keithp@keithp.com>
42609 Date: Sat Oct 10 15:08:14 2009 -0700
42611 Report igniter continuity in pad/idle mode via beeper
42613 one short beep = drogue
42614 two short beeps = main
42615 three short beeps = both
42616 one long warble = neither
42618 In idle mode, it does this just once. In pad mode, it keeps testing
42621 Signed-off-by: Keith Packard <keithp@keithp.com>
42623 commit adf8764bc4591795ba4e618ccbd6393fc6ce6450
42624 Author: Bdale Garbee <bdale@gag.com>
42625 Date: Sat Oct 10 15:11:23 2009 -0600
42627 update changelogs for Debian build
42629 commit 541da6f3bbf81be93dfe3c01f7c8cfd757b28a2b
42630 Merge: dfc73cb 5f26ad6
42631 Author: Bdale Garbee <bdale@gag.com>
42632 Date: Sat Oct 10 15:05:50 2009 -0600
42634 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42636 commit 46cccf62fb40514b5930fcb2ffdaf2735415c764
42637 Merge: fb8f3fe 5f26ad6
42638 Author: Keith Packard <keithp@keithp.com>
42639 Date: Sat Oct 10 14:00:03 2009 -0700
42641 Merge branch 'master' into skytraq
42643 commit 5f26ad663b3f60dddc9d967206e365f45dc4acd1
42644 Author: Keith Packard <keithp@keithp.com>
42645 Date: Sat Oct 10 13:58:16 2009 -0700
42647 ao-dumplog: switch to 'e' command, display progress
42649 Using the 'e' command allows additional checking of the data,
42650 including end-to-end checksums and detection of missing data.
42652 Progress is displayed by showing the recorded flight state along with
42653 a '.' for each eeprom block read.
42655 Signed-off-by: Keith Packard <keithp@keithp.com>
42657 commit fb8f3fee6a1bab1e46d782e84405845cee2dadb4
42658 Merge: 22856cf b8fc397
42659 Author: Keith Packard <keithp@keithp.com>
42660 Date: Sat Oct 10 13:41:00 2009 -0700
42662 Merge branch 'master' into skytraq
42664 commit b8fc3975bd92037a0cf53b0ff2b0e05ce0ba668f
42665 Author: Keith Packard <keithp@keithp.com>
42666 Date: Sat Oct 10 13:39:01 2009 -0700
42668 Send 0-length IN packet to flush USB after full packet
42670 USB bulk transfers are a sequence of maximum-sized packets followed by
42671 a short packet, which signals the end of the transfer. When the last
42672 packet of the transfer would be a full-sized packet, an additional
42673 packet of zero length is sent to signal the transfer end.
42675 Signed-off-by: Keith Packard <keithp@keithp.com>
42677 commit 22856cf8bb0f5e1f37c9b774132d9ef6934526ed
42678 Merge: 2f76034 e29961f
42679 Author: Keith Packard <keithp@keithp.com>
42680 Date: Sat Oct 10 11:44:20 2009 -0700
42682 Merge branch 'master' into skytraq
42684 commit e29961fdb2a48874c895829880eadbf13e094c0c
42685 Author: Keith Packard <keithp@keithp.com>
42686 Date: Sat Oct 10 11:43:31 2009 -0700
42688 Add channel menu to ao-view.
42690 Sets radio channel when TD is connected, saves selected channel in
42693 Signed-off-by: Keith Packard <keithp@keithp.com>
42695 commit 2f7603490a169df8f18b565db4fa967832ffc9bd
42696 Author: Keith Packard <keithp@keithp.com>
42697 Date: Fri Oct 9 22:48:29 2009 -0700
42699 Build two versions of TM, one for SiRF, one for SkyTraq
42701 This creates two separate images, depending on which GPS unit is
42704 Signed-off-by: Keith Packard <keithp@keithp.com>
42706 commit 33b0b6f2f2e07de105619a7b463226d2813152ab
42707 Author: Keith Packard <keithp@keithp.com>
42708 Date: Fri Oct 9 22:02:40 2009 -0700
42710 Add support for the SkyTraq GPS unit
42712 This is a build-time option selected by hacking the Makefile at present.
42714 Signed-off-by: Keith Packard <keithp@keithp.com>
42716 commit a3771bfc5ce740f9d89193e9f8b1d7987aa57264
42717 Author: Keith Packard <keithp@keithp.com>
42718 Date: Tue Oct 6 20:06:00 2009 -0700
42720 ao-view: fix snd_pcm_open return checking
42722 I don't know how this code was supposed to work before...
42724 Signed-off-by: Keith Packard <keithp@keithp.com>
42726 commit ac4b8a73848f434999a532eab4665253c267c597
42727 Author: Keith Packard <keithp@keithp.com>
42728 Date: Tue Oct 6 20:05:36 2009 -0700
42730 ao-postflight: dump out GPS signal data
42732 Signed-off-by: Keith Packard <keithp@keithp.com>
42734 commit dfc73cba1bee8b121e00e8cba45e7dfaaf79e9d8
42735 Author: Bdale Garbee <bdale@gag.com>
42736 Date: Mon Sep 21 22:46:59 2009 -0700
42738 update changelogs for Debian build
42740 commit 459ff3d377297f80ee2fba0df0a29ff6603467a1
42741 Author: Bdale Garbee <bdale@gag.com>
42742 Date: Mon Sep 21 11:00:32 2009 -0700
42744 update changelogs for Debian build
42746 commit 327c64305a59f48ababf19875874a550af6b9cef
42747 Merge: c8a81a4 74f0fb4
42748 Author: Bdale Garbee <bdale@gag.com>
42749 Date: Mon Sep 21 11:00:22 2009 -0700
42751 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42753 commit 74f0fb4dd189abc1d5027c64fa5a648a6003285a
42754 Author: Keith Packard <keithp@keithp.com>
42755 Date: Sun Sep 20 13:33:59 2009 -0700
42757 make bit-banging reset script actually reset
42759 commit 7ea371a09385e2a93199f78685e8cb86793ed104
42760 Author: Keith Packard <keithp@keithp.com>
42761 Date: Sun Sep 20 13:33:26 2009 -0700
42763 Add --gps option to ao-postflight
42765 commit bc7ccb339e538a0e6120db0e5c0d9130c565e0dd
42766 Author: Keith Packard <keithp@keithp.com>
42767 Date: Sun Sep 20 13:32:59 2009 -0700
42769 ao_rawload: Don't reset after we finish loading
42771 commit c8a81a419f7f2331624f90bd6c107a86f6b04451
42772 Author: Bdale Garbee <bdale@gag.com>
42773 Date: Sun Sep 20 09:21:00 2009 -0600
42775 update changelogs for Debian build
42777 commit df42ccaaf468cdc5d93cbd1c001f58df58419722
42778 Merge: 0b24e40 078e9cd
42779 Author: Bdale Garbee <bdale@gag.com>
42780 Date: Sun Sep 20 09:19:28 2009 -0600
42782 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42784 commit 078e9cdbdb388b22c6151f76ff0660fc14b8ef55
42785 Author: Keith Packard <keithp@keithp.com>
42786 Date: Thu Sep 10 11:53:06 2009 -0700
42788 Plot raw accel data for the motor accel section.
42790 This shows a short sequence of accelerometer data without any filtering.
42792 Signed-off-by: Keith Packard <keithp@keithp.com>
42794 commit 8b485d937ff148848ebda7f9ca6be29bb1de1f16
42795 Author: Keith Packard <keithp@keithp.com>
42796 Date: Sun Sep 6 21:02:48 2009 -0700
42798 Show acceleration only during boost phase.
42800 We're interested in motor performance; the rest of the flight is
42803 Signed-off-by: Keith Packard <keithp@keithp.com>
42805 commit 9e660315e1bd2bf71ab1c0574e895e1f7608a58f
42806 Author: Keith Packard <keithp@keithp.com>
42807 Date: Sun Sep 6 21:01:44 2009 -0700
42809 Fix cc_period_make to not get stuck on samples with matching time
42811 When two samples have matching times, step to the second one;
42812 otherwise, we'll get stuck forever.
42814 Signed-off-by: Keith Packard <keithp@keithp.com>
42816 commit 932f1539b38567e565fd484171c13539b1467308
42817 Author: Keith Packard <keithp@keithp.com>
42818 Date: Sun Sep 6 20:26:17 2009 -0700
42820 Color plots, integrate only flight portion of data.
42822 Telemetry files have piles of pad data which shouldn't be integrated
42823 into the velocity data as it tends to generate huge values from the
42824 noise of the sensor.
42826 Also make the data lines colored to keep them visually distinct from
42827 the rest of the plot image.
42829 Signed-off-by: Keith Packard <keithp@keithp.com>
42831 commit 9177f5f4e9d832558ddd9ab227c4511f6201e7e5
42832 Author: Keith Packard <keithp@keithp.com>
42833 Date: Sun Sep 6 18:11:24 2009 -0700
42835 Update usage and man page for ao-postflight
42837 commit 0b24e4034f93010372a3d084668d10f0e4a2c2e1
42838 Author: Bdale Garbee <bdale@gag.com>
42839 Date: Sun Sep 6 18:01:20 2009 -0600
42841 update changelogs for Debian build
42843 commit a5e94aa0677070a051714443cf7fd7e2b5e90269
42844 Author: Bdale Garbee <bdale@gag.com>
42845 Date: Sun Sep 6 17:59:47 2009 -0600
42847 need a run-time dependency to pull in the cairo module
42849 commit 97acef95cc9843998963921459fdd71dd7eaa6b4
42850 Author: Bdale Garbee <bdale@gag.com>
42851 Date: Sun Sep 6 17:48:23 2009 -0600
42853 update changelogs for Debian build
42855 commit 3f95a5abbf8ada70328ced45fbb2781ed1cb3d29
42856 Author: Bdale Garbee <bdale@gag.com>
42857 Date: Sun Sep 6 17:48:10 2009 -0600
42859 more build deps for plotting lib
42861 commit 9d7e96e323d652de08b2f2a73e0eb3c321080185
42862 Author: Bdale Garbee <bdale@gag.com>
42863 Date: Sun Sep 6 17:47:56 2009 -0600
42865 update changelogs for Debian build
42867 commit ae4e131b61244e06020b82919e31e05dd7dba88f
42868 Author: Bdale Garbee <bdale@gag.com>
42869 Date: Sun Sep 6 17:46:39 2009 -0600
42871 update changelogs for Debian build
42873 commit 37e6c9a492a1d51373bf9333fb3172e0c377720f
42874 Merge: d256f82 2e6686b
42875 Author: Bdale Garbee <bdale@gag.com>
42876 Date: Sun Sep 6 17:46:10 2009 -0600
42878 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42880 commit 2e6686b1e183c66188ea447b8a54e4c29402443b
42881 Author: Keith Packard <keithp@keithp.com>
42882 Date: Sun Sep 6 16:45:47 2009 -0700
42884 Use plplotd instead of plplotd-gnome2
42886 commit d256f8204e9fce53ae4309562bb4c0cde1fae43e
42887 Merge: 0fc344d 32d3536
42888 Author: Bdale Garbee <bdale@gag.com>
42889 Date: Sun Sep 6 17:34:08 2009 -0600
42891 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42893 commit 32d3536706324808df6cd02248a236302b831571
42894 Author: Keith Packard <keithp@keithp.com>
42895 Date: Sun Sep 6 16:24:35 2009 -0700
42897 Add plots to ao-postflight using the plplot library
42899 It's not perfect, but it generates .svg plot output.
42901 Signed-off-by: Keith Packard <keithp@keithp.com>
42903 commit 0fc344dfc031a8b1eef7cc40efb1d5ba7782269d
42904 Author: Bdale Garbee <bdale@gag.com>
42905 Date: Sun Sep 6 14:15:57 2009 -0600
42907 update changelogs for Debian build
42909 commit 4b0de757874c0ecaf38e3dfd3beefc398150e3d5
42910 Merge: 773c4ff d0eac98
42911 Author: Bdale Garbee <bdale@gag.com>
42912 Date: Sun Sep 6 14:15:53 2009 -0600
42914 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42916 commit d0eac989b1ffc8ae30ba12da403eb4bf1ad42d6b
42917 Author: Keith Packard <keithp@keithp.com>
42918 Date: Sun Sep 6 13:15:10 2009 -0700
42920 Don't look at NULL strings (summary_name)
42922 Signed-off-by: Keith Packard <keithp@keithp.com>
42924 commit 73f4a57239f770aff603b961169c0e2cfe2c276b
42925 Author: Keith Packard <keithp@keithp.com>
42926 Date: Sun Sep 6 13:08:54 2009 -0700
42928 Use pressure speed for drogue and beyond states. Fix differentiation time.
42930 Drogue state should always use pressure speeds.
42932 Differentiation code was using centi-seconds instead of seconds.
42934 Signed-off-by: Keith Packard <keithp@keithp.com>
42936 commit 773c4ffbc1d2e02eb02cfa543a077a408986da30
42937 Author: Bdale Garbee <bdale@gag.com>
42938 Date: Sun Sep 6 14:05:55 2009 -0600
42940 update changelogs for Debian build
42942 commit 45ede4a4b203ef9da5bf05c49cb9c5a2e6382ec5
42943 Merge: 45e2938 e35e485
42944 Author: Bdale Garbee <bdale@gag.com>
42945 Date: Sun Sep 6 14:05:51 2009 -0600
42947 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42949 commit e35e485ffe6b26034788ab295121bc2693b7eec1
42950 Author: Keith Packard <keithp@keithp.com>
42951 Date: Sun Sep 6 13:04:31 2009 -0700
42953 Initialize summary_name and detail_name so stuff appears on stdout.
42955 Uninitialized variables lead to mysterious results.
42957 Signed-off-by: Keith Packard <keithp@keithp.com>
42959 commit 45e2938121411d1fc9b3aec3fdeaaeb3c90db5ed
42960 Author: Bdale Garbee <bdale@gag.com>
42961 Date: Sun Sep 6 14:02:14 2009 -0600
42963 update changelogs for Debian build
42965 commit d42ebf0661ecf15455e5051de1e16ae66f8dd857
42966 Merge: 384dbe9 7a19aac
42967 Author: Bdale Garbee <bdale@gag.com>
42968 Date: Sun Sep 6 14:02:09 2009 -0600
42970 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42972 commit 7a19aac5e881e635962a64fff73027ca2143b96f
42973 Author: Keith Packard <keithp@keithp.com>
42974 Date: Sun Sep 6 12:51:48 2009 -0700
42976 Add DSP code to filter data, allowing for integration/differentiation
42978 This adds the computation of speed from both accelerometer and
42979 barometer measurements and then presents a periodic flight profile
42980 using filtered data as a detailed flight record.
42982 Signed-off-by: Keith Packard <keithp@keithp.com>
42984 commit 384dbe9fc7fa8e4e5dceec5e150f0f1d3383bbdc
42985 Author: Bdale Garbee <bdale@gag.com>
42986 Date: Sun Sep 6 10:40:06 2009 -0600
42988 update changelogs for Debian build
42990 commit 35c54b3a278fa9bc2bc7f4b5ee04866697c93ba0
42991 Merge: 4f8eff7 6d018ab
42992 Author: Bdale Garbee <bdale@gag.com>
42993 Date: Sun Sep 6 10:39:23 2009 -0600
42995 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
42997 commit 6d018ab933832e2d80bb1564c339d9fb18b57be2
42998 Author: Keith Packard <keithp@keithp.com>
42999 Date: Sat Sep 5 22:45:49 2009 -0700
43001 Handle vageries of .telem files in ao-postflight
43003 Telem files have multiple entries of the same state, and sometimes
43004 long gaps between recordings. Deal with this as best as possible.
43006 Signed-off-by: Keith Packard <keithp@keithp.com>
43008 commit c46e832b28820d7c5be4efaacbbd7c0607927fe5
43009 Author: Keith Packard <keithp@keithp.com>
43010 Date: Sat Sep 5 22:03:31 2009 -0700
43012 Add simple post-flight analysis tool (ao-postflight)
43014 This tool reads either an eeprom or telem log file and displays some
43015 rudimentary data (max accel/alt for each flight stage).
43017 Signed-off-by: Keith Packard <keithp@keithp.com>
43019 commit 26f56b51bd11aa91f1d77b81827b49c28cb6ec5f
43020 Author: Keith Packard <keithp@keithp.com>
43021 Date: Sat Sep 5 00:29:26 2009 -0700
43023 Add ao-dumplog to capture flight log from command line
43025 This duplicates the functionality of the flight log stuf in ao-view,
43026 except from the command line where it belongs.
43028 Signed-off-by: Keith Packard <keithp@keithp.com>
43030 commit 73adae3661160d410dcc802873b530d255c210e5
43031 Author: Keith Packard <keithp@keithp.com>
43032 Date: Fri Sep 4 15:30:22 2009 -0700
43034 Add --device/-D support to the command line tools and manuals
43036 Use the new cc_usbdevs_find_by_arg function to locate suitable target
43037 devices connected via USB.
43039 Signed-off-by: Keith Packard <keithp@keithp.com>
43041 commit 4f8eff7401ee2d8092ab36fa33411f9b23dda880
43042 Author: Bdale Garbee <bdale@gag.com>
43043 Date: Fri Sep 4 16:03:55 2009 -0600
43045 update changelogs for Debian build
43047 commit 332b056459b1352e233a8bf5f08498df12d32160
43048 Author: Keith Packard <keithp@keithp.com>
43049 Date: Fri Sep 4 15:01:32 2009 -0700
43051 'fix' ao-eeprom to read two blocks at once. Work around kernel bugs.
43053 The kernel appears to leave serial data undelivered at times. Reading
43054 two blocks at once appears to make it relinquish the queued data.
43056 Signed-off-by: Keith Packard <keithp@keithp.com>
43058 commit df88ae4c5f229efcc0ea5cb0a81fc2bb8f96fea2
43059 Author: Keith Packard <keithp@keithp.com>
43060 Date: Fri Sep 4 14:23:02 2009 -0700
43062 Add 'ao-list' utility to show attached AltOS devices
43064 Signed-off-by: Keith Packard <keithp@keithp.com>
43066 commit 0935d6a7e907e20381a42882ae728051f9bece02
43067 Author: Keith Packard <keithp@keithp.com>
43068 Date: Fri Sep 4 14:21:19 2009 -0700
43070 Parse the USB serial number as an integer.
43072 AltOS devices use simple integer serial numbers, so parse the USB
43073 value as such to make matching values more forgiving.
43075 Signed-off-by: Keith Packard <keithp@keithp.com>
43077 commit 0c771d999914f9d17c723900f2987acc45fd0fbb
43078 Author: Keith Packard <keithp@keithp.com>
43079 Date: Fri Sep 4 13:00:02 2009 -0700
43081 Move usb scanning code to ao-tools library
43083 This will allow the scanning code to be used by the command line tools
43084 as well as the ao-view GUI.
43086 Now that ao-view depends on the ao-tools library, it has been moved to
43087 the ao-tools directory as well.
43089 Signed-off-by: Keith Packard <keithp@keithp.com>
43091 commit 15341b6e6dcf52df083d6aa37ef881ea6ad48ee5
43092 Author: Keith Packard <keithp@keithp.com>
43093 Date: Fri Sep 4 12:25:37 2009 -0700
43095 Set all of the values to reset the radio for telemetry
43097 Was sizeof(rdf_setup) instead of sizeof(telemetry_setup) when
43098 resetting the radio back to telemetry data mode from rdf mode. With
43099 the length value removed from the rdf config, these two arrays are no
43100 longer the same length, and so the last config value was not set
43101 leaving the radio sending garbage.
43103 Signed-off-by: Keith Packard <keithp@keithp.com>
43105 commit fee46389b70a624ab5b1128a8b4c3083c7747bcb
43106 Author: Keith Packard <keithp@keithp.com>
43107 Date: Fri Sep 4 11:46:55 2009 -0700
43109 Make RDF beacon only run on pad and after landing.
43111 It's pretty much impossible to RDF the rocket during flight, and it
43112 interferes with the telemetry data stream. Leave it enabled on the pad
43113 so that radios can be tested, and then re-enable it once the rocket
43116 This patch also turns the rdf 'on' time into a parameter so it can be
43117 changed, and then sets that parameter to 500ms, once every 5 seconds.
43119 Signed-off-by: Keith Packard <keithp@keithp.com>
43121 commit 54545640b0db7747137655f84bc67fd290ecb904
43122 Author: Keith Packard <keithp@keithp.com>
43123 Date: Fri Sep 4 11:45:52 2009 -0700
43125 Add back the RDF tone generator
43127 Tracking the rocket on the ground may be easier using tones than using
43128 the digital data stream, so we'll try that and see what we think.
43130 This reverts commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9.
43132 Signed-off-by: Keith Packard <keithp@keithp.com>
43134 commit 9fafee109e96435c96639b21211cac0500673a63
43135 Author: Bdale Garbee <bdale@gag.com>
43136 Date: Wed Sep 2 23:18:15 2009 -0600
43138 update changelogs for Debian build
43140 commit cb4a73f3b65ba72f645fd37ab8712829c9537bf8
43141 Merge: 9ddd869 e2e449d
43142 Author: Bdale Garbee <bdale@gag.com>
43143 Date: Wed Sep 2 23:17:37 2009 -0600
43145 Merge commit 'origin/master'
43147 commit e2e449d5c23356e913f312de1fb2611a9dd5a352
43148 Author: Keith Packard <keithp@keithp.com>
43149 Date: Wed Sep 2 22:01:52 2009 -0700
43151 Remove bit-banging debug support from TM board builds
43153 Our current TM boards don't have the wires to do bit-banging to
43154 another cc1111 board, so it doesn't make sense to fill up their flash
43155 with useless code (and the 'help' text with useless commands). Leave
43156 this to the TI board until we have boards that can serve as debug dongles.
43158 Signed-off-by: Keith Packard <keithp@keithp.com>
43160 commit acea083d80e1ecc4287083519ea666964016b257
43161 Author: Keith Packard <keithp@keithp.com>
43162 Date: Wed Sep 2 22:00:37 2009 -0700
43164 Make the ao_log_record structures 8 bytes again.
43166 When the GPS signal strength data was added, the structure was
43167 accidentally extended to 9 bytes, making all log records 9 bytes
43168 long. While not a serious problem, this left log records spanning
43169 across eeprom block boundaries, which seems like a bad plan.
43171 Signed-off-by: Keith Packard <keithp@keithp.com>
43173 commit 7d39f17684feb49ac8a0017902158f298696e37c
43174 Author: Keith Packard <keithp@keithp.com>
43175 Date: Wed Sep 2 21:57:54 2009 -0700
43177 Make eeprom reads and writes across block boundary work
43179 Reading and writing across the block boundary was not stepping the
43180 eeprom position after the partial i/o operation at the end of the
43181 first block. This meant that the operation would re-use the end of the
43182 previous block, either re-reading or re-writing it.
43184 Signed-off-by: Keith Packard <keithp@keithp.com>
43186 commit 9ddd8696b4004ccc03238d95a8c2a1d07075e0fb
43187 Author: Bdale Garbee <bdale@gag.com>
43188 Date: Mon Aug 31 16:48:03 2009 -0600
43190 update changelogs for Debian build
43192 commit 6926c4ab5d87a8f2eb4fcde2c673fb3a4639e115
43193 Author: Bdale Garbee <bdale@gag.com>
43194 Date: Mon Aug 31 16:47:44 2009 -0600
43196 pixmap file should not be executable
43198 commit 1495e2f27acde3743c3764a0c31ee082224d6c64
43199 Author: Bdale Garbee <bdale@gag.com>
43200 Date: Mon Aug 31 16:42:55 2009 -0600
43202 update changelogs for Debian build
43204 commit c8c5b7963babe8eb16e2651fba9cd2c8d1cba74e
43205 Author: Bdale Garbee <bdale@gag.com>
43206 Date: Mon Aug 31 16:42:37 2009 -0600
43208 deliver an icon for the Debian menu system
43210 commit 591b99c232e780246fc07841c09c8c4e7835facb
43211 Author: Bdale Garbee <bdale@gag.com>
43212 Date: Mon Aug 31 16:26:00 2009 -0600
43214 update changelogs for Debian build
43216 commit b34474c1f3083e73b7184d519f54d4c8031836fd
43217 Merge: 8df1697 0d65bff
43218 Author: Bdale Garbee <bdale@gag.com>
43219 Date: Mon Aug 31 16:25:32 2009 -0600
43221 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
43223 commit 6358041f846ba9a20fa650c367d907dc4336e54c
43224 Author: Keith Packard <keithp@keithp.com>
43225 Date: Sat Aug 22 13:38:56 2009 -0700
43227 Enable GPS degraded mode, set 10 sec degraded timeout.
43229 No reason not to let the GPS report solutions whenever it likes, let's
43230 see how this works.
43232 Signed-off-by: Keith Packard <keithp@keithp.com>
43234 commit 0d65bff443c17d4d98c18b620ec075ab66b30efd
43235 Author: Keith Packard <keithp@keithp.com>
43236 Date: Fri Aug 21 10:47:46 2009 -0700
43238 Turn off GPS tracking data when not present in data stream
43240 Signed-off-by: Keith Packard <keithp@keithp.com>
43242 commit 8df169791835510d96c11a3b0aa3cc5b79fa7fde
43243 Author: Bdale Garbee <bdale@gag.com>
43244 Date: Wed Aug 19 02:21:23 2009 -0600
43246 update changelogs for Debian build
43248 commit 42ab6d52540d0326ef89e9d57954b08248558468
43249 Author: Bdale Garbee <bdale@gag.com>
43250 Date: Wed Aug 19 02:21:06 2009 -0600
43252 fix location for delivery of sources.list fragment
43254 commit 977f5dc0bc7c666dcc1f21db77416efca0d696aa
43255 Author: Bdale Garbee <bdale@gag.com>
43256 Date: Wed Aug 19 02:11:11 2009 -0600
43258 update changelogs for Debian build
43260 commit 8d4d6655f1b4c2fbc522fd255bfb75406e5ddaef
43261 Author: Bdale Garbee <bdale@gag.com>
43262 Date: Wed Aug 19 02:11:00 2009 -0600
43264 oops, aoview is now ao-view!
43266 commit b9a97aea65f871fd287bc0bb566d8664766f4afd
43267 Author: Bdale Garbee <bdale@gag.com>
43268 Date: Wed Aug 19 02:07:16 2009 -0600
43270 update changelogs for Debian build
43272 commit 21e3dd0affac89919e5d0e29c6e9eb1eacb51801
43273 Author: Bdale Garbee <bdale@gag.com>
43274 Date: Wed Aug 19 02:06:49 2009 -0600
43276 enable support for Debian menus
43278 commit 0087c1776e0253fc2bd3b86f15bf9d1b32bdc45a
43279 Author: Bdale Garbee <bdale@gag.com>
43280 Date: Wed Aug 19 00:52:57 2009 -0600
43282 update changelogs for Debian build
43284 commit 4486d9156e19e4280b42bcd422d81d04f2d04a92
43285 Merge: dd09f0b 33edd62
43286 Author: Bdale Garbee <bdale@gag.com>
43287 Date: Wed Aug 19 00:49:24 2009 -0600
43289 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
43291 commit 33edd62992a32b0ec8ca66d879fa300871db5937
43292 Author: Keith Packard <keithp@keithp.com>
43293 Date: Tue Aug 18 23:38:16 2009 -0700
43295 Update ao-view to add GPS satellite tracking data
43297 This adds another column to the display to hold per-satellite GPS
43298 tracking data and a count of the visible and locked sats.
43300 Signed-off-by: Keith Packard <keithp@keithp.com>
43302 commit 29687cbd462a332d9a36ed87500c5b737dcae3f4
43303 Author: Keith Packard <keithp@keithp.com>
43304 Date: Tue Aug 18 22:35:15 2009 -0700
43306 Handle GPS satellite tracking data
43308 SiRF message #4 includes signal strength and GPS engine state for each
43309 of the satellites being tracked. This data is now parsed and sent to
43310 eeprom and the radio.
43312 Signed-off-by: Keith Packard <keithp@keithp.com>
43314 commit dd09f0bc2b950c00f3b489878cd69ad8a003f46c
43315 Author: Bdale Garbee <bdale@gag.com>
43316 Date: Tue Aug 18 21:57:01 2009 -0600
43318 update changelogs for Debian build
43320 commit cd5ce661e2a8f9694933358ccb5b916fbed089c2
43321 Author: Bdale Garbee <bdale@gag.com>
43322 Date: Tue Aug 18 21:49:39 2009 -0600
43324 add support for building Debian package
43326 commit d996aa9b32fb0eb385bd3d158256c29788a42fe3
43327 Merge: b3b2d3c 7d4ceb7
43328 Author: Bdale Garbee <bdale@gag.com>
43329 Date: Tue Aug 18 18:56:09 2009 -0600
43331 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
43333 commit 7d4ceb75a454e6c9b3fe0bd934fadcb5104dea36
43334 Author: Keith Packard <keithp@keithp.com>
43335 Date: Tue Aug 18 17:55:22 2009 -0700
43337 Add ao-ejection.1 man page
43339 Document the input requirements and output format
43341 Signed-off-by: Keith Packard <keithp@keithp.com>
43343 commit b3b2d3c475a135084b5628c730fc6fca1ba0817b
43344 Merge: 4685fc5 da12b89
43345 Author: Bdale Garbee <bdale@gag.com>
43346 Date: Tue Aug 18 18:36:03 2009 -0600
43348 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
43350 commit da12b89fb056a68e65ba363fef91d266727cb685
43351 Author: Keith Packard <keithp@keithp.com>
43352 Date: Tue Aug 18 17:30:43 2009 -0700
43354 Create ChangeLog from git log
43356 commit 7d69e2b3715faed10ce21ad562fc4d25dfc5f9c1
43357 Author: Keith Packard <keithp@keithp.com>
43358 Date: Tue Aug 18 17:29:29 2009 -0700
43360 Fix ao-bitbang examples to not have . in the first column
43362 commit 4685fc541466afbeefc151bcb64cd054739c048b
43363 Merge: 1c2a0b6 c29275b
43364 Author: Bdale Garbee <bdale@gag.com>
43365 Date: Tue Aug 18 18:09:38 2009 -0600
43367 Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
43370 ao-tools/ao-bitbang/Makefile.am
43371 ao-tools/ao-eeprom/Makefile.am
43372 ao-tools/ao-load/Makefile.am
43373 ao-tools/ao-load/ao-load.c
43374 ao-tools/ao-rawload/Makefile.am
43376 commit c29275b72438637d46d7a50742882d2736eb176a
43377 Author: Keith Packard <keithp@keithp.com>
43378 Date: Tue Aug 18 15:21:57 2009 -0700
43380 Add manual pages for remaining commands.
43382 Manuals written for ao-bitbang, ao-eeprom, ao-load, ao-rawload and
43385 Manual for ao-dbg updated to reflect program name change.
43387 Signed-off-by: Keith Packard <keithp@keithp.com>
43389 commit 9b03d620722dc54630539afba40720c30de69b2d
43390 Author: Keith Packard <keithp@keithp.com>
43391 Date: Tue Aug 18 12:19:31 2009 -0700
43393 Use --tty/-T on command line to specify target device
43395 Also, use the ALTOS_TTY environment variable in all tools. Note that
43396 the magic value of "BITBANG" switches the library to connecting
43397 through a CP2103 instead.
43399 Signed-off-by: Keith Packard <keithp@keithp.com>
43401 commit 7c790fe859dff062692964338091ffbbcdf63257
43402 Author: Keith Packard <keithp@keithp.com>
43403 Date: Tue Aug 18 12:40:24 2009 -0700
43405 Rename tools to ao-<foo>
43407 Use a consistent prefix to make it easier to remember which programs
43408 belong to this package
43410 Signed-off-by: Keith Packard <keithp@keithp.com>
43412 commit 1c2a0b6653623b689d68d7349a6b2dce3e20a4a6
43413 Author: Keith Packard <keithp@keithp.com>
43414 Date: Tue Aug 18 13:36:54 2009 -0700
43416 re-add debugger sources
43418 commit 9a9cce5510b87252f863239ac807b9fb4395b288
43419 Author: Keith Packard <keithp@keithp.com>
43420 Date: Tue Aug 18 12:19:31 2009 -0700
43422 Start working on using getopt for the tty name
43424 commit 9789ca5e8caa9a013e804f307b9da380e147bd75
43425 Author: Keith Packard <keithp@keithp.com>
43426 Date: Tue Aug 18 12:40:24 2009 -0700
43428 Rename tools to ao-<foo>
43430 Use a consistent prefix to make it easier to remember which programs
43431 belong to this package
43433 Signed-off-by: Keith Packard <keithp@keithp.com>
43435 commit a5782398d968e7cb11f7203afada7c216f233b3b
43436 Author: Keith Packard <keithp@keithp.com>
43437 Date: Tue Aug 18 11:34:28 2009 -0700
43439 Remove unused cctools code paths for old libusb and cp2103 ioctls.
43441 Communication with the CP2103 board has gone through three revisions,
43442 first using ioctls supported by the CP2103 kernel driver, then using
43443 the old synchronous usb library and now using the newer libusb
43444 asynchronous interface. There's no reason to keep shipping the old
43445 stale code now that the new stuff works reliably.
43447 Signed-off-by: Keith Packard <keithp@keithp.com>
43449 commit 7cba411de0780c65e3490ab67186a514f0ea42ec
43450 Author: Keith Packard <keithp@keithp.com>
43451 Date: Mon Aug 17 20:47:31 2009 -0700
43453 test for sdcc, nickle and readline
43455 Signed-off-by: Keith Packard <keithp@keithp.com>
43457 commit f48dcffae761700355a17b59345d55a60703f0c4
43458 Author: Keith Packard <keithp@keithp.com>
43459 Date: Sun Aug 9 20:43:10 2009 -0700
43461 Sync USB data after each memory write command
43463 This makes sure we flush the USB link often enough for the other end to keep
43466 Signed-off-by: Keith Packard <keithp@keithp.com>
43468 commit cd5456f18e4b39ad76d5549df91a0e0cfb18a2e9
43469 Author: Keith Packard <keithp@keithp.com>
43470 Date: Sun Aug 9 16:08:07 2009 -0700
43472 Handle partial ALSA PCM writes
43474 The ALSA spec says that snd_pcm_writei will not return a partial write, but
43475 at least on the OLPC, that's not true. Deal with this.
43477 Signed-off-by: Keith Packard <keithp@keithp.com>
43479 commit 3056cb8eef5aee0dcd342488386355d8b8f574c8
43480 Author: Keith Packard <keithp@keithp.com>
43481 Date: Sun Aug 9 15:55:19 2009 -0700
43483 Check more alsa return statuses
43485 commit 8ddf3345afd8cbf638e81993633f7861d8dbca63
43486 Author: Keith Packard <keithp@keithp.com>
43487 Date: Sat Jul 18 01:47:34 2009 -0700
43489 Don't report distance to rocket without valid GPS
43491 When there's no valid GPS data, don't try to report the distance and bearing
43492 to the rocket after landing.
43494 Signed-off-by: Keith Packard <keithp@keithp.com>
43496 commit fbcb7b20fa701a6e534d38e307839466545668e3
43497 Author: Keith Packard <keithp@keithp.com>
43498 Date: Sat Jul 18 01:05:33 2009 -0700
43500 Add B command to set serial baud rate
43502 Signed-off-by: Keith Packard <keithp@keithp.com>
43504 commit 91b023e7e4eeed838e0320d2ddac0f6aac39e565
43505 Author: Keith Packard <keithp@keithp.com>
43506 Date: Sat Jul 18 01:05:13 2009 -0700
43508 Get rid of spaces after minus sign in climb value
43510 commit 28be20cf914fb34dc3c776519708d0f02091764e
43511 Author: Keith Packard <keithp@keithp.com>
43512 Date: Sat Jul 18 01:04:39 2009 -0700
43514 Switch to 57600 baud for GPS data
43516 commit d3f76ce58b9c0ed2e5a9fe3bbc7fb9cb38247714
43517 Author: Keith Packard <keithp@keithp.com>
43518 Date: Sat Jul 18 01:04:17 2009 -0700
43520 Drain serial port before changing speed
43522 Signed-off-by: Keith Packard <keithp@keithp.com>
43524 commit d7c2d358ed8a1afc9f0ba2bd830b10f6b56dc7b1
43525 Author: Keith Packard <keithp@keithp.com>
43526 Date: Sat Jul 18 00:44:42 2009 -0700
43528 Display last known GPS coord while unlocked
43530 Signed-off-by: Keith Packard <keithp@keithp.com>
43532 commit 5195fcfe239e430e1f9f11774c9a245c7b29dae9
43533 Author: Keith Packard <keithp@keithp.com>
43534 Date: Sat Jul 18 00:44:01 2009 -0700
43536 use g_source_destroy instead of free on serial object
43538 commit 1e5e98bd8f5ea0bc15592de454e3629383462371
43539 Author: Keith Packard <keithp@keithp.com>
43540 Date: Sat Jul 18 00:43:22 2009 -0700
43542 Trim aoview_serial_set_callback args down to just port and callback
43544 commit 08f37056deec25d77062bc411a04033401b033a5
43545 Author: Keith Packard <keithp@keithp.com>
43546 Date: Fri Jul 17 22:11:03 2009 -0700
43548 Reset GPS at boot time
43550 commit 1150aa850f5a025b849556e32c4dddb27937d9af
43551 Author: Keith Packard <keithp@keithp.com>
43552 Date: Fri Jul 17 22:10:43 2009 -0700
43554 Fix up serial debug output
43556 commit 2a7956a64935246475f92d44c08369e0230b676a
43557 Author: Keith Packard <keithp@keithp.com>
43558 Date: Fri Jul 17 21:34:13 2009 -0700
43560 Allow the GPS port to run at 4800 baud if desired
43562 commit 8d650769c319261c97f5e68eff9138207b95c0f8
43563 Author: Keith Packard <keithp@keithp.com>
43564 Date: Fri Jul 17 21:33:53 2009 -0700
43566 Initialize the GPS serial protocol state
43568 Signed-off-by: Keith Packard <keithp@keithp.com>
43570 commit ab40d224b39ba6d29c4056e2d2c365e1eb3d3793
43571 Author: Keith Packard <keithp@keithp.com>
43572 Date: Fri Jul 17 21:33:18 2009 -0700
43574 Use uint8_t for comparisons to avoid int conversions
43576 Signed-off-by: Keith Packard <keithp@keithp.com>
43578 commit d6749bf24792bb41ca700cf4b8e5e1ac1a63cbf0
43579 Author: Keith Packard <keithp@keithp.com>
43580 Date: Fri Jul 17 21:30:53 2009 -0700
43582 Add AO_GPS_RUNNING state.
43584 This tracks whether the GPS receiver has ever sent a valid report to the
43585 flight computer, allowing the user to tell whether the GPS receiver is
43588 Signed-off-by: Keith Packard <keithp@keithp.com>
43590 commit a1da7e871aee75308bc05ce1b7a0dc402e4c9509
43591 Author: Keith Packard <keithp@keithp.com>
43592 Date: Fri Jul 17 21:25:35 2009 -0700
43594 Add M command to monitor serial bytes
43596 commit ddfa2308c0be4c002f982ae9da6032ee7854117d
43597 Author: Keith Packard <keithp@keithp.com>
43598 Date: Fri Jul 17 21:24:45 2009 -0700
43600 Support the not-connected GPS state
43602 commit 34f148500df427c148188c0ada20bf914a7c74ba
43603 Author: Keith Packard <keithp@keithp.com>
43604 Date: Fri Jul 17 19:23:10 2009 -0700
43606 Use 57600 baud for GPS. Clean up gps init.
43608 Assume GPS is either in 4800 NMEA or 57600 SiRF mode, send just the sequence
43609 to get from 4800 NMEA to 5760 SiRF.
43611 Also, eliminate threads from the gps test program.
43613 Signed-off-by: Keith Packard <keithp@keithp.com>
43615 commit 2deca0c52cd6cfb4baceb59c8a5458344bada338
43616 Author: Keith Packard <keithp@keithp.com>
43617 Date: Fri Jul 17 17:09:20 2009 -0700
43619 Try harder to get the GPS receiver serial link sync'd up.
43621 We cannot assume that the GPS receiver is in any particular state when it
43622 boots, so we try to send the serial configuration at several rates and hope
43623 that it eventually sees something that it likes.
43625 Signed-off-by: Keith Packard <keithp@keithp.com>
43627 commit 31d5670a9144b943ce9c8cb00deb5fb659af0b1c
43628 Author: Keith Packard <keithp@keithp.com>
43629 Date: Fri Jul 17 17:06:18 2009 -0700
43631 Rolling average for pad location. Say 'GPS ready'.
43633 Use a rolling average for the pad location, instead of just averaging all
43634 positions. This filters out old (presumably less accurate) values eventually.
43636 When enough GPS samples have been acquired, say 'GPS ready'.
43638 Signed-off-by: Keith Packard <keithp@keithp.com>
43640 commit bfe1e76c82738baaf65abbc58c3244a07ea8fefe
43641 Author: Keith Packard <keithp@keithp.com>
43642 Date: Fri Jul 17 16:22:51 2009 -0700
43644 Split GPS data into a separate column
43646 Signed-off-by: Keith Packard <keithp@keithp.com>
43648 commit 5f0179652e8bb85add9067e5253e981c60f2c51e
43649 Author: Keith Packard <keithp@keithp.com>
43650 Date: Fri Jul 17 16:03:35 2009 -0700
43652 Fix up SiRF parsing and test code so that it actually works
43654 Signed-off-by: Keith Packard <keithp@keithp.com>
43656 commit 0b35447d05a0c7eaf4fefcbcf0065fe3320bba82
43657 Author: Keith Packard <keithp@keithp.com>
43658 Date: Fri Jul 17 13:58:14 2009 -0700
43660 Add host-side gps protocol testing program
43662 commit fef7334bddb9fccfbd6deab7d5d466ab3e76323a
43663 Author: Keith Packard <keithp@keithp.com>
43664 Date: Sat Jul 11 00:56:13 2009 -0700
43666 Hook aoview directly to alsa
43668 This skips the flite internal audio stuff which opened and closed the audio
43669 device for each phrase. This caused the first part of some phrases to be
43670 missed when using an external audio device.
43672 Signed-off-by: Keith Packard <keithp@keithp.com>
43674 commit 80cadf44f5f1accd6ddfca25c2af8d4d424f26d9
43675 Author: Keith Packard <keithp@keithp.com>
43676 Date: Thu Jul 9 20:55:10 2009 -0700
43678 Show speed. Format numbers. Timeout and report final status.
43680 The speed value is now shown in the top label bar. Ascent shows
43681 accelerometer-derived data, otherwise it's baro derived.
43683 All of the numbers displayed are now given sensible printf formats so they
43684 don't contain way too many digits.
43686 Instead of doing periodic reporting based on flight tick count, data is
43687 reported every 10 seconds based on wall time. After landing, or when no data
43688 have been received for a while, final flight information is spoken.
43690 Signed-off-by: Keith Packard <keithp@keithp.com>
43692 commit 19630ef084866f4230e68ccf11284b30c68128b1
43693 Author: Keith Packard <keithp@keithp.com>
43694 Date: Sun Jul 5 08:35:28 2009 -0700
43696 Dont smash aoview_monitor_parse input buffer
43698 commit e506ed4b6efb86eab50204658fcd433b987e3831
43699 Author: Keith Packard <keithp@keithp.com>
43700 Date: Tue Jun 30 15:25:52 2009 -0700
43702 Integrate flite into aoview directly. Fix great circle computation.
43704 Use a separate thread for flite rather than a separate program.
43705 Save voice state to gconf.
43706 Add filters for replay file selection
43708 Signed-off-by: Keith Packard <keithp@keithp.com>
43710 commit 5b988e0146075d57434f8484e1ec9fcf3e183df2
43711 Author: Keith Packard <keithp@keithp.com>
43712 Date: Tue Jun 30 15:24:53 2009 -0700
43716 commit 696233b088645bba1aaa6aa6c5358c3ecfa5cd3f
43717 Author: Keith Packard <keithp@keithp.com>
43718 Date: Tue Jun 30 15:24:31 2009 -0700
43722 commit 2e06772c8b6fd74f86e640ed97f0d5bc8c095c2f
43723 Author: Keith Packard <keithp@keithp.com>
43724 Date: Tue Jun 30 11:58:30 2009 -0700
43726 Add telem replay and larger labels
43728 Replays telemetry files in real time
43729 Shows height/state/rssi in big values at the top.
43731 Signed-off-by: Keith Packard <keithp@keithp.com>
43733 commit 566dde161385263700eaae51095eecfa9b5972ee
43734 Author: Keith Packard <keithp@keithp.com>
43735 Date: Mon Jun 29 23:06:47 2009 -0700
43737 Update aoview/.gitignore
43739 Signed-off-by: Keith Packard <keithp@keithp.com>
43741 commit 4ca2d910f3be689fd3c78a4f1be0555d6b1a30c1
43742 Author: Keith Packard <keithp@keithp.com>
43743 Date: Mon Jun 29 23:05:27 2009 -0700
43745 Use flite to announce flight state
43747 This uses the flite voice synthesis library from festival to announce
43748 altitude and speed information during the rocket flight.
43750 Signed-off-by: Keith Packard <keithp@keithp.com>
43752 commit 527d7c803ed9597b210634018cb2eb9d048d9846
43753 Author: Keith Packard <keithp@keithp.com>
43754 Date: Mon Jun 29 23:03:58 2009 -0700
43756 Add GPS speed and error data to telemetry and aoview
43758 Having switched to the SiRF binary GPS format, the velocity and error data
43759 can now be displayed.
43761 Signed-off-by: Keith Packard <keithp@keithp.com>
43763 commit ee4919dd771b00e2a2dd1083c9528efa7baab50f
43764 Author: Keith Packard <keithp@keithp.com>
43765 Date: Mon Jun 29 13:54:00 2009 -0700
43767 Convert GPS to SiRF binary protocol.
43769 This switches the GPS unit from NMEA to SiRF protocol at startup and then
43770 parses the binary data. The binary data uses a different encoding of lat/lon
43771 than the NMEA strings, and so the telemetry and eeprom data formats change
43774 Signed-off-by: Keith Packard <keithp@keithp.com>
43776 commit 49bf37767d2453869f2ca2c0832d1124322c66e0
43777 Author: Keith Packard <keithp@keithp.com>
43778 Date: Wed Jun 17 23:22:25 2009 -0700
43780 Add ejection computation utility
43782 Signed-off-by: Keith Packard <keithp@keithp.com>
43784 commit e59520e343c2573b1b92c0b3c4aaa93e51bc55d3
43785 Author: Keith Packard <keithp@keithp.com>
43786 Date: Wed Jun 17 13:55:23 2009 -0700
43788 Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4
43790 None of our boards have a 32kHz xtal oscillator, instead we use those pins
43791 (on Telemetrum) for the deployment firing circuits. The old clock
43792 initialization code was switching from the 32kHz RC oscillator to the 32kHz
43793 crystal and overriding our use of those pins.
43795 Signed-off-by: Keith Packard <keithp@keithp.com>
43797 commit 1c3cc12c08ddefbd6456a55c54ef87dd94d4ae9a
43798 Author: Keith Packard <keithp@keithp.com>
43799 Date: Sun Jun 14 17:25:34 2009 -0700
43801 Some kernels reference USB ttys as tty/tty* instead of tty:tty*
43803 Signed-off-by: Keith Packard <keithp@keithp.com>
43805 commit 0f2cbd41332b1b63865c5f1a4e749419b469853a
43806 Author: Keith Packard <keithp@keithp.com>
43807 Date: Sun Jun 14 16:45:19 2009 -0700
43809 Rename state apogee -> coast
43811 commit 5834a12c1d3d71105c9e3d1ceaf9f3ffac9ff1eb
43812 Author: Keith Packard <keithp@keithp.com>
43813 Date: Sun Jun 14 16:39:28 2009 -0700
43815 rename states. launchpad -> pad, coast -> fast
43817 commit 8c40f19acd09fe93d492c9355da8a1198c34b1c3
43818 Author: Keith Packard <keithp@keithp.com>
43819 Date: Sun Jun 14 16:36:29 2009 -0700
43821 Disable monitor mode when communicating via usb
43823 commit 7adea9c59c73acd52743446c74fb675e0a1d6d05
43824 Author: Keith Packard <keithp@keithp.com>
43825 Date: Thu Jun 4 14:38:45 2009 -0700
43827 Format GPS seconds as %02d.%04d to avoid spaces in the value
43829 The aoview GPS parsing code doesn't deal well with spaces in the middle of
43830 the value, so pad the seconds field with a zero as needed.
43832 Signed-off-by: Keith Packard <keithp@keithp.com>
43834 commit a0e6bfee635b64092262936c858542318f6fc6dc
43835 Author: Bdale Garbee <bdale@gag.com>
43836 Date: Thu Jun 4 13:11:48 2009 -0600
43838 newer INSTALL file pulled in by autogen.sh
43840 commit cf1e258d52b878df10b51a047709b10ecd51a68e
43841 Author: Bdale Garbee <bdale@gag.com>
43842 Date: Thu Jun 4 13:09:29 2009 -0600
43844 add a distclean target to src/Makefile
43846 commit 176052b7c14fcad067835ecb550778faf67cf4da
43847 Author: Bdale Garbee <bdale@gag.com>
43848 Date: Thu Jun 4 13:07:10 2009 -0600
43850 add lib to the front of the subdir list
43852 commit 208bc15714c7b4020c017eef19011c4eb9ab51e2
43853 Author: Keith Packard <keithp@keithp.com>
43854 Date: Thu Jun 4 11:20:10 2009 -0700
43856 Move build and debug tools to 'cctools' directory.
43858 These tools were merged in from the ccdbg package.
43860 Signed-off-by: Keith Packard <keithp@keithp.com>
43862 commit 17d2432a8b9c15963cd3b821f025ad33972ef477
43863 Merge: 210dbaa 8a9a3f0
43864 Author: Keith Packard <keithp@keithp.com>
43865 Date: Thu Jun 4 11:13:15 2009 -0700
43867 Merge ccdbg and altos sources into one giant repository
43869 Keeping these separate isn't making things any easier.
43871 Signed-off-by: Keith Packard <keithp@keithp.com>
43873 commit 210dbaa23cdacf3a6f2d6e23493e96ee2ac9bca7
43874 Author: Keith Packard <keithp@keithp.com>
43875 Date: Thu Jun 4 10:41:34 2009 -0700
43877 Use autotools, move altos to src subdir
43879 Signed-off-by: Keith Packard <keithp@keithp.com>
43881 commit 8cce307bb3156584ba17ae5a787f645dfee5fb94
43882 Author: Keith Packard <keithp@keithp.com>
43883 Date: Thu Jun 4 10:25:30 2009 -0700
43885 Make menu seperator insensitive
43887 commit 778cae8fc5a4b30e5045e4703316fc61ae18562a
43888 Author: Keith Packard <keithp@keithp.com>
43889 Date: Wed Jun 3 17:07:34 2009 -0700
43891 aoview: Add eeprom data fetching
43893 Fetches the last flight data from a TM device connected via USB and writes
43894 it to the flight log directory.
43896 Signed-off-by: Keith Packard <keithp@keithp.com>
43898 commit bf140966e9649e75b884c8aa5f25ffbf9eed10ea
43899 Author: Keith Packard <keithp@keithp.com>
43900 Date: Wed Jun 3 10:57:46 2009 -0700
43902 Stop log dumping at flight end. Print 'end' at end of log.
43904 No reason to continue dumping data past the end of the flight now that the
43905 logging stuff has been demonstrated to work reliably. Also, to make
43906 automated log dumping easier, this prints out 'end' after the log data so
43907 that aoview knows when to stop reading.
43909 Signed-off-by: Keith Packard <keithp@keithp.com>
43911 commit 35ac66969abe24ca23776618306a59fc17770e06
43912 Author: Keith Packard <keithp@keithp.com>
43913 Date: Sun May 31 09:22:01 2009 -0700
43915 Start adding bi-directional packet link
43917 commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9
43918 Author: Keith Packard <keithp@keithp.com>
43919 Date: Thu May 28 23:17:33 2009 -0700
43921 Eliminate RDF tone generation.
43923 Now that we have a viable telemetry-signal based RDF device via TeleDongle,
43924 there's no reason to continue to waste power and bandwidth with a NFM tone.
43926 Signed-off-by: Keith Packard <keithp@keithp.com>
43928 commit 4d83eef0fe1d24a845ab29a535dfc56e13e7ee20
43929 Author: Keith Packard <keithp@keithp.com>
43930 Date: Thu May 28 23:17:25 2009 -0700
43932 Change .gitignore to match new aoload procedure
43934 commit dcfcf3bec6788460b6fe8c239c80bad4526bd15b
43935 Author: Keith Packard <keithp@keithp.com>
43936 Date: Wed May 27 22:01:37 2009 -0700
43938 Leave serial number writing to aoload
43940 Instead of building per-serial hex files, leave that
43941 process to the new aoload program
43943 Signed-off-by: Keith Packard <keithp@keithp.com>
43945 commit 8a9a3f02b951382573ff74dd6ce5a1c0f335fa86
43946 Author: Keith Packard <keithp@keithp.com>
43947 Date: Wed May 27 21:53:15 2009 -0700
43949 Add aoload to load serial-numbered altos binaries.
43951 aoload is a custom version of ccload which edits the data before sending it
43952 to the target machine, writing the target serial number into the data.
43954 Signed-off-by: Keith Packard <keithp@keithp.com>
43956 commit 5a7a63c34b778e40a61ddabd16ec1af9a2be50c3
43957 Author: Keith Packard <keithp@keithp.com>
43958 Date: Sat May 23 21:20:12 2009 -0700
43960 Fix aoview telemetry GPS parsing code to use correct columns
43962 This code was trying to pull the GPS data from the wrong columns, causing
43963 aoview to fail to display GPS information.
43965 Signed-off-by: Keith Packard <keithp@keithp.com>
43967 commit 26988c3e7acb2fa832810475e43e08fd2867459c
43968 Author: Keith Packard <keithp@keithp.com>
43969 Date: Sat May 23 21:18:57 2009 -0700
43971 Parse both telemetry or log data ao_flight_test
43973 Change the way data is fed from files to the flight test rig to handle
43974 either kind of input file.
43976 Signed-off-by: Keith Packard <keithp@keithp.com>
43978 commit d6f5a0689023546464a71561f53fa2c943077c88
43979 Author: Keith Packard <keithp@keithp.com>
43980 Date: Sat May 23 21:16:22 2009 -0700
43982 Avoid 16-bit overflow in velocity computation.
43984 Adding two 16 bit integers together can wrap around to negative numbers,
43985 this resulted in velocity values which never decreased, making the switch
43986 from coast to apogee state not occur.
43988 Signed-off-by: Keith Packard <keithp@keithp.com>
43990 commit aa6d87aeb616dd62f0debaded297232022b4f8bd
43991 Author: Keith Packard <keithp@keithp.com>
43992 Date: Wed May 20 09:44:55 2009 -0700
43994 Make file handling more general so it can be reused.
43996 The log file handling stuff will be useful for saving eeprom data, so pull
43997 it out of the real-time log handling code and make a general interface.
43999 Signed-off-by: Keith Packard <keithp@keithp.com>
44001 commit b730c8bcbce649cdddba935e1112aaae538bc526
44002 Author: Keith Packard <keithp@keithp.com>
44003 Date: Sun May 17 23:54:44 2009 -0700
44005 Ignore aoview_glade.h
44007 commit 91b07410122d0eaaf292cdb31c200925d45eaf2c
44008 Author: Keith Packard <keithp@keithp.com>
44009 Date: Sun May 17 23:36:21 2009 -0700
44011 Transmit computed ground pressure and acceleration values
44013 These are the last two values relevant to figuring out the state of the
44014 flight computer, and as they are computed by averaging 10 seconds of 100Hz
44015 sample data, they're a lot more accurate than anything the receiver could do
44018 Signed-off-by: Keith Packard <keithp@keithp.com>
44020 commit 71d1689759829f1bc8550f1a4d8c9f2dc90b2ab4
44021 Author: Keith Packard <keithp@keithp.com>
44022 Date: Sun May 17 23:18:09 2009 -0700
44024 Provide install target
44026 commit f301b95e87c8ec1e3b58d595a05d486bede5e0c2
44027 Author: Keith Packard <keithp@keithp.com>
44028 Date: Sun May 17 23:13:20 2009 -0700
44030 Embed glade file in executable
44032 This eliminates install issues nicely.
44034 Signed-off-by: Keith Packard <keithp@keithp.com>
44036 commit 26361686d6fc63dc22d22285f0543c5c2c756fb4
44037 Author: Keith Packard <keithp@keithp.com>
44038 Date: Sun May 17 23:05:23 2009 -0700
44040 Add About dialog to aoview.
44042 Signed-off-by: Keith Packard <keithp@keithp.com>
44044 commit 0f3233c49f43cd4e372e613303919ce4d50255b2
44045 Author: Keith Packard <keithp@keithp.com>
44046 Date: Sun May 17 22:44:19 2009 -0700
44048 USB device names can contain '.' too
44050 Depending on the hierarchy of devices, names can contain '.', so allow those
44053 Signed-off-by: Keith Packard <keithp@keithp.com>
44055 commit 33221277690e6ee30387c506c3f2b8237ed48efd
44056 Author: Keith Packard <keithp@keithp.com>
44057 Date: Sun May 17 22:43:34 2009 -0700
44059 scandir returns -1 on error
44061 In which case, the namelist is invalid, so don't look at it, and don't free
44064 Signed-off-by: Keith Packard <keithp@keithp.com>
44066 commit 7cb9fb675f56bf30ab6bf0bcdc5cb679709ffe3e
44067 Author: Keith Packard <keithp@keithp.com>
44068 Date: Sun May 17 22:29:54 2009 -0700
44070 Send computed accel/vel/pres values over the radio
44072 These computed values reflect what the flight computer is actually refering
44073 to for state changes, and will be useful in debugging the flight software as
44074 well as provide a filtered view of the data.
44076 Signed-off-by: Keith Packard <keithp@keithp.com>
44078 commit 2c780d67b8a22d75a2da4b2af21fd35f0c6f5236
44079 Author: Keith Packard <keithp@keithp.com>
44080 Date: Sun May 17 22:29:06 2009 -0700
44082 Handle disappearing serial devices
44084 Put up a dialog when the serial open fails, and shut down monitoring when
44085 the serial device disappears while running.
44087 Signed-off-by: Keith Packard <keithp@keithp.com>
44089 commit 69616104813fc5ba89fb3128d04fb9328961c59c
44090 Author: Keith Packard <keithp@keithp.com>
44091 Date: Sun May 17 22:24:53 2009 -0700
44093 While on the pad, zero out velocity every second
44095 We integrate acceleration to get velocity, but that means sitting on the pad
44096 for a long time can add substantial error to the velocity value. Each
44097 second, take the velocity value from a full second ago and subtract that out
44098 of the current velocity. Once we detect boost, this will stop, which means
44099 that as long as we detect boost within a second, we won't have subtracted
44100 out any "real" velocity.
44102 This keeps the pad velocity hovering around zero, which is pretty useful.
44104 Signed-off-by: Keith Packard <keithp@keithp.com>
44106 commit 1234694eb903b204488ddc7cb30bcfe34bf1e677
44107 Author: Keith Packard <keithp@keithp.com>
44108 Date: Sun May 17 01:29:06 2009 -0700
44110 Clear table, reset log on disconnect
44112 commit 4316b6af86b37522038e642235c163fcaad52e96
44113 Author: Keith Packard <keithp@keithp.com>
44114 Date: Sun May 17 01:28:16 2009 -0700
44116 Add pad lat/lon, max accel, max height
44118 Signed-off-by: Keith Packard <keithp@keithp.com>
44120 commit 4348281bd788a13ea700413537f12da3c00356e4
44121 Author: Keith Packard <keithp@keithp.com>
44122 Date: Sun May 17 00:46:09 2009 -0700
44124 Clean up GPS display
44126 Signed-off-by: Keith Packard <keithp@keithp.com>
44128 commit ff68e38770351ddac3285ce275cd85adab01fd3d
44129 Author: Keith Packard <keithp@keithp.com>
44130 Date: Sun May 17 00:45:38 2009 -0700
44132 Make aoview window taller
44134 Signed-off-by: Keith Packard <keithp@keithp.com>
44136 commit be3f4fed7b863c8cdaabe32b61b65a8b3cd11355
44137 Author: Keith Packard <keithp@keithp.com>
44138 Date: Sun May 17 00:13:45 2009 -0700
44140 Add lots more aoview UI bits
44142 Logs data to files, displays current state in window.
44144 Signed-off-by: Keith Packard <keithp@keithp.com>
44146 commit 93d7ce8e054515ed7b166eb042ae7f47e564d21d
44147 Author: Keith Packard <keithp@keithp.com>
44148 Date: Sat May 16 20:45:26 2009 -0700
44150 When logging starts up, right the whole ring to the log.
44152 This preserves the data pre boost-detect for later analysis.
44154 Signed-off-by: Keith Packard <keithp@keithp.com>
44156 commit fec4212a59a7b3321536b25707dcabc43c797c33
44157 Author: Keith Packard <keithp@keithp.com>
44158 Date: Sat May 16 20:04:31 2009 -0700
44160 Abandon use of accelerometer for apogee detect.
44162 Integrating the accelerometer data to compute velocity worked for one rocket
44163 flight, but additional testing shows that it doesn't work in other
44164 airframes. Until we figure out how this should work, we'll rely on the
44165 altimeter to detect apogee.
44167 Signed-off-by: Keith Packard <keithp@keithp.com>
44169 commit 09771c644de54ae354e8f98af7ba74289b3c0fcc
44170 Author: Keith Packard <keithp@keithp.com>
44171 Date: Sat May 16 02:25:04 2009 -0700
44173 Add preliminary aoview code
44175 AoView connects with TeleDongle to present telemetry information in a
44176 reasonable form. Right now, it just displays information to stdout, but it
44177 does have fancy dialogs for finding the USB devices.
44179 Signed-off-by: Keith Packard <keithp@keithp.com>
44181 commit 37250b00f6286aee4b3b28604f5d463db3079a89
44182 Author: Keith Packard <keithp@keithp.com>
44183 Date: Wed May 13 20:41:54 2009 -0700
44185 Discard usb output before connection. Handle USB reset.
44187 Discarding output before USB is plugged in allows threads that send output
44188 and do other things to work without a USB connection. Unfortuantely, there
44189 doesn't appear to be any way to detect when the USB link is disconnected,
44190 which means that once USB is enabled, future writes will continue to block.
44192 USB reset causes the USB interrupts to all be reconfigured back to power-on
44195 Signed-off-by: Keith Packard <keithp@keithp.com>
44197 commit 9b974217958b1017e62d6c4f4568f547ccc30c58
44198 Author: Keith Packard <keithp@keithp.com>
44199 Date: Wed May 13 20:40:42 2009 -0700
44201 Enable radio monitor by default in teleterra, teledongle and tidongle
44203 These ground loads want to monitor the radio constantly, and not require use
44204 of the 'm' command before listening.
44206 Signed-off-by: Keith Packard <keithp@keithp.com>
44208 commit 25fc03a333b2cfad0a93ebc385fbcf74b63c229e
44209 Author: Keith Packard <keithp@keithp.com>
44210 Date: Wed May 13 20:39:28 2009 -0700
44212 Remove monitor/rssi functions from telemetrum load
44214 Telemetrum is now a flight-only load, use teleterra or teledongle for ground
44217 Signed-off-by: Keith Packard <keithp@keithp.com>
44219 commit 05493b98eb1ae4d30cb0b600849d70b03fa33594
44220 Author: Keith Packard <keithp@keithp.com>
44221 Date: Wed May 13 20:38:11 2009 -0700
44223 Split out ao_state_names to separate file
44225 Allows state names to be used in programs without monitoring enabled.
44227 Signed-off-by: Keith Packard <keithp@keithp.com>
44229 commit d085d43701e3cdd2119e947a9ae45baa78c80318
44230 Author: Keith Packard <keithp@keithp.com>
44231 Date: Wed May 13 14:29:30 2009 -0700
44233 Indicate RSSI with a blinking LED
44235 Blink the red LED at a rate proportional to the RSSI value.
44237 Signed-off-by: Keith Packard <keithp@keithp.com>
44239 commit 055331d5f7d5adc40c348c3efd331a562dcda82a
44240 Author: Keith Packard <keithp@keithp.com>
44241 Date: Wed May 13 11:19:13 2009 -0700
44243 Make ao_flight_test show AGL altitude and positive acceleration under boost
44245 This makes the output more readable
44247 Signed-off-by: Keith Packard <keithp@keithp.com>
44249 commit d91208fbf5fc7797b93087ef8619454c4bed0130
44250 Author: Keith Packard <keithp@keithp.com>
44251 Date: Wed May 13 11:18:24 2009 -0700
44253 Make ao_flight_test able to read raw logging data
44255 Protect ao_flight_test reading functions so that a simple
44256 'script' output can be fed to the program and have it work correctly.
44258 Signed-off-by: Keith Packard <keithp@keithp.com>
44260 commit d3dbd8949e1102220ad5fd0863f493c819b96e46
44261 Author: Keith Packard <keithp@keithp.com>
44262 Date: Wed May 13 11:16:53 2009 -0700
44264 Print only RSSI when packet CRC is invalid
44266 Packets with invalid CRC usually contain bogus data, so don't print that,
44267 just print out the RSSI which may contain useful data.
44269 Signed-off-by: Keith Packard <keithp@keithp.com>
44271 commit 8168820b667cc1deffab64dd81cb4e6e2e6eabe4
44272 Author: Keith Packard <keithp@keithp.com>
44273 Date: Wed May 13 11:00:43 2009 -0700
44275 Accelerometer-based velocity values are invalid after apogee
44277 Because the orientation of the flight computer relative to the ground is
44278 unknown after apogee, the accelerometer data cannot be integrated to compute
44279 velocity. Main deploy is now based purely on barometric altitude and landing
44280 detection no longer checks for a low velocity value.
44282 Signed-off-by: Keith Packard <keithp@keithp.com>
44284 commit 24fdda44ff8604e40510b196ead17564d8f8cd3d
44285 Author: Keith Packard <keithp@keithp.com>
44286 Date: Wed May 13 10:59:04 2009 -0700
44288 Add velocity check for boost detect via accelerometer
44290 Bumping the rocket can cause a brief period of high acceleration, which may
44291 cause a mistaken boost detection. Require both a high acceleration and
44292 reasonable velocity to trigger boost phase.
44294 Signed-off-by: Keith Packard <keithp@keithp.com>
44296 commit 7a1aa3fdbc0d1fae5e7ee027bf8904598c6ebe41
44297 Author: Keith Packard <keithp@keithp.com>
44298 Date: Wed May 13 10:58:30 2009 -0700
44302 commit 497c89a7d08920630894b2605c3b6a0bdc4c229b
44303 Author: Keith Packard <keithp@keithp.com>
44304 Date: Sun May 10 23:11:06 2009 -0700
44306 Use recorded accelerometer baseline data in ao_flight_test
44308 With the flight computer recording a long-term average value for the
44309 accelerometer in the flight record, use that to prime the flight test code
44310 when running a log file through the simulator.
44312 Signed-off-by: Keith Packard <keithp@keithp.com>
44314 commit ba3c53636e485450f48093d0a88a6629775f7c3a
44315 Author: Keith Packard <keithp@keithp.com>
44316 Date: Sun May 10 23:01:16 2009 -0700
44318 Don't re-initialize the landing range data at each apogee detect sample
44320 The landing range values are used only after apogee detect, so we need only
44321 initialize them on the transition from apogee to drogue.
44323 Signed-off-by: Keith Packard <keithp@keithp.com>
44325 commit b623b1098bc7a10d471730259438fb82804221d0
44326 Author: Keith Packard <keithp@keithp.com>
44327 Date: Sun May 10 23:00:06 2009 -0700
44329 Initialize ao_min_vel with |ao_flight_vel|
44331 As ao_min_vel is stored as an absolute value, it's important to preserve
44332 that invariant, even though we don't expect ao_flight_vel to be negative at
44335 Signed-off-by: Keith Packard <keithp@keithp.com>
44337 commit e9584e846b9bd7926d61451d32ba5d7a30416f7b
44338 Author: Keith Packard <keithp@keithp.com>
44339 Date: Sun May 10 22:58:31 2009 -0700
44341 Decrease telemetry rate on the pad to 1/sec instead of 20/sec
44343 Transmitting telemetry through the radio consumes a significant amount of
44344 battery; reducing the rate to 1/sec will reduce power usage while waiting
44347 Signed-off-by: Keith Packard <keithp@keithp.com>
44349 commit 97cecb517cd7bf75e1219c76a93bfe6964c07052
44350 Author: Keith Packard <keithp@keithp.com>
44351 Date: Sun May 10 22:57:19 2009 -0700
44353 Increase the initial accel/baro average to 1000 samples
44355 To get an accurate baseline of the launchpad state, take a longer average of
44356 the two sensors as the unit boots up.
44358 Signed-off-by: Keith Packard <keithp@keithp.com>
44360 commit 98806b1ff3f41484663d61ff430e9e2764c7b5e6
44361 Author: Keith Packard <keithp@keithp.com>
44362 Date: Sun May 10 22:54:14 2009 -0700
44364 Record average accelerometer value in flight start log record
44366 The average accelerometer value cannot be extracted from the log as the
44367 record starts after that is computed. As that drives much of the
44368 accelerometer-based state transition logic, it is an important value to
44369 have, so we log it as part of the flight start record now.
44371 Signed-off-by: Keith Packard <keithp@keithp.com>
44373 commit a12edbfe21fe27a9efbf87bacda9ab4806256e2b
44374 Author: Keith Packard <keithp@keithp.com>
44375 Date: Sat May 9 10:24:10 2009 -0700
44377 Add version command to show product information
44379 commit e80b87f5e3ccf152d67a2e87bdefda161c455599
44380 Author: Keith Packard <keithp@keithp.com>
44381 Date: Sat May 9 10:23:49 2009 -0700
44383 Pad callsign with nuls
44385 commit beae3360828da21eb1a3c4f88e930f242d4e36b7
44386 Author: Keith Packard <keithp@keithp.com>
44387 Date: Fri May 1 08:14:57 2009 -0700
44389 USB spec limits bulk endpoints to 64 byte payload max.
44391 For full-speed devices, bulk endpoints may use 8, 16, 32 or 64 bytes, but no
44394 commit de7814c738488c2c16c6216c93fa78128895e5d5
44395 Author: Keith Packard <keithp@keithp.com>
44396 Date: Wed Apr 29 17:46:56 2009 -0700
44398 Use 'char' instead of 'uint8_t' for character data
44400 String and character constants are of char type, so using uint8_t causes
44401 promotion to 16-bit types when comparing the two.
44403 commit 4ae74fffb939d67424efa3e7f433637f1f920ebc
44404 Author: Keith Packard <keithp@keithp.com>
44405 Date: Wed Apr 29 17:46:36 2009 -0700
44407 Eliminate incorrect cast in printf string argument
44409 char * is a pointer to a string in the default address space, not a generic pointer
44410 to a string. As such, the compiler (at least 2.9.0) mis-compiles this if the
44413 commit 39f2a3c6bd501d12a92bfd38434ce67bb5beb70d
44414 Author: Keith Packard <keithp@keithp.com>
44415 Date: Wed Apr 29 17:44:41 2009 -0700
44417 Correct radio frequency shown in config display.
44419 Radio frequency base is 434.550, not 435.550
44421 commit 75ca1751b7cac2f8074d0713ee96d6ab45b54f19
44422 Author: Keith Packard <keithp@keithp.com>
44423 Date: Wed Apr 29 17:42:26 2009 -0700
44425 Reset landing interval tests at apogee
44427 This moves all of the interval management into the landing test code and
44428 out of the main loop. The interval is reset at apogee to make sure the
44429 sensors produce a stable reading for at least 20 seconds
44431 commit 7a1b77c2d7253a681389f32b70e2460aac188807
44432 Author: Bdale Garbee <bdale@gag.com>
44433 Date: Sun Apr 26 17:53:13 2009 -0600
44435 clean up host programs, too
44437 commit 5df80c346d65a9d56a8699b056dc44924acb31fe
44438 Author: Keith Packard <keithp@keithp.com>
44439 Date: Sun Apr 26 16:04:07 2009 -0700
44441 Was missing v_batt in adc dump command
44443 commit c3fec2c4c65db71e88ef0c05c69463438a7cfc6c
44444 Author: Keith Packard <keithp@keithp.com>
44445 Date: Sun Apr 26 15:38:28 2009 -0700
44447 Add manual ignition and igniter test commands
44449 commit 819f1de8dd6010fae050bcef930943c7923929f9
44450 Author: Keith Packard <keithp@keithp.com>
44451 Date: Sun Apr 26 15:38:03 2009 -0700
44453 Clean up commands a bit
44455 commit 178abb5c8439509926a5507911d7148b84f051b8
44456 Author: Keith Packard <keithp@keithp.com>
44457 Date: Sun Apr 26 15:08:58 2009 -0700
44459 Clear more files on make clean
44461 commit 70a69f3acdca27b80cdb2069de59bbc6dba83dbd
44462 Author: Keith Packard <keithp@keithp.com>
44463 Date: Sun Apr 26 15:05:29 2009 -0700
44465 Label binaries with product and serial info
44467 commit 5ed3b1cb52b573db1fee9655a29a0e6dd72f53fe
44468 Author: Keith Packard <keithp@keithp.com>
44469 Date: Sun Apr 26 01:37:02 2009 -0700
44471 Make sure full log is written and flushed on landing.
44473 The final state change to landing is recorded in the logging thread, so have
44474 that turn off logging once it has recorded that state. Then make it go to
44477 commit 2e737ad00cad5d893b252d8aa9dbff3d9b800731
44478 Author: Keith Packard <keithp@keithp.com>
44479 Date: Sun Apr 26 01:36:53 2009 -0700
44481 Clean up monitor output a bit
44483 commit 38a0b61b0a0b3c00f064c8d562950a17a6ddff4a
44484 Author: Keith Packard <keithp@keithp.com>
44485 Date: Sun Apr 26 00:11:32 2009 -0700
44487 Add configuration support
44489 Current config variables:
44490 Main deploy altitude above launch (in meters)
44491 Acceleration zero g calibration (manual or automatic)
44492 Radio channel (freq = 435.550MHz + channel * 100kHz)
44493 Callsign (max 8 characters)
44495 Supporting this involved shuffling code around so that the
44496 non-telemetrum builds could include only the stuff they needed.
44498 commit c65f1a1acd2ca00758833cec5d3f8056d303d3e2
44499 Author: Keith Packard <keithp@keithp.com>
44500 Date: Sat Apr 25 14:44:33 2009 -0700
44502 Allow for slower ADC operation. Add power saving code.
44504 This tries to make the flight computer use less power by disabling USB in
44505 flight mode, lowering the telemetry rate after ascent. It also disables the
44506 RDF beacon during ascent and re-enables it once descent has started.
44508 commit 8e7b48b5f090be81980ab00fbce814ae1cc253e4
44509 Author: Keith Packard <keithp@keithp.com>
44510 Date: Sat Apr 25 14:44:04 2009 -0700
44512 Allow ADC to be disabled
44514 commit 7bc3d9962872850e7b420221cf689db16b4305cc
44515 Author: Keith Packard <keithp@keithp.com>
44516 Date: Sat Apr 25 14:43:23 2009 -0700
44518 Place CPU in P0 state while idle
44520 commit e45fce7f82d704d677f84c69b0e07588d109d780
44521 Author: Keith Packard <keithp@keithp.com>
44522 Date: Sat Apr 25 14:42:20 2009 -0700
44524 Add RDF beacon and callsign to telemetry
44526 commit 61510f98404bca6861b2da98f6cd9ba9deb76968
44527 Author: Keith Packard <keithp@keithp.com>
44528 Date: Sat Apr 25 14:40:51 2009 -0700
44530 Add radio code to emit a 1kHz tone
44532 commit 0f07803d84b5ac89500ee33a6818c50583e3ff7f
44533 Author: Keith Packard <keithp@keithp.com>
44534 Date: Sat Apr 25 13:18:37 2009 -0700
44536 Allow the USB system to be disabled/enabled at run-time
44538 commit 45976af820fc41099928df71ea8304c56eb9fc7c
44539 Author: Keith Packard <keithp@keithp.com>
44540 Date: Sat Apr 25 13:16:27 2009 -0700
44542 Make LED usage depend on target device
44544 commit 4a050704ad2c497e9f1b0988334228b0bbc4c170
44545 Author: Keith Packard <keithp@keithp.com>
44546 Date: Sat Apr 25 13:13:24 2009 -0700
44548 Make some functions reentrant to save DSEG space
44550 commit 6b3d25a6d6d7847765eb03b836913dd5ecef2993
44551 Author: Keith Packard <keithp@keithp.com>
44552 Date: Fri Apr 24 19:17:37 2009 -0700
44554 Add monitor task to flight software
44556 Allows the use of telemetrum in teledongle mode.
44558 commit ad0d2d88a91cbd02c56ea5ff6dab23e16aec6510
44559 Author: Keith Packard <keithp@keithp.com>
44560 Date: Fri Apr 24 19:17:19 2009 -0700
44562 Report difference from ground to max altitude at landing
44564 commit f94ab879ff6f97708827c74facd11003a2d8b590
44565 Author: Keith Packard <keithp@keithp.com>
44566 Date: Fri Apr 24 19:16:29 2009 -0700
44568 Display data with units while running simulation
44570 commit 6fb26340b150e831a8a9e25e3b68074c29e48dbe
44571 Author: Keith Packard <keithp@keithp.com>
44572 Date: Fri Apr 24 19:13:31 2009 -0700
44574 Enabling apogee detect via speed: < 200m/s && < max_speed - 50m/s
44576 This change ensures that we actually got going fairly fast, and then slowed
44577 down a bunch before enabling apogee detect. Otherwise, we'll detect apogee
44578 right off the pad as we're not going very fast at that point...
44580 This also adds the 'f' command to show the current flight status on the USB
44583 commit 20b9f304ecbddd73a0ee2461b4c5e80f08157f98
44584 Author: Keith Packard <keithp@keithp.com>
44585 Date: Fri Apr 24 19:12:28 2009 -0700
44587 configure igniter ports, set values to measured ones
44589 commit 6bf1d91ce0b723abe2bcec89668c13135ec044cf
44590 Author: Keith Packard <keithp@keithp.com>
44591 Date: Fri Apr 24 19:11:40 2009 -0700
44593 Move ao_led_init to end of file to be consistent with other files
44595 commit b4de7d550ec9a09ccf5f6a72debc6646706e3516
44596 Author: Keith Packard <keithp@keithp.com>
44597 Date: Fri Apr 24 19:10:20 2009 -0700
44599 Define ao_state_names in ao.h so other people can share
44601 commit 8e62747b3692d0ac75b08eaf5c3e4b5d766be6ad
44602 Author: Keith Packard <keithp@keithp.com>
44603 Date: Fri Apr 24 19:09:31 2009 -0700
44605 Bump NUM_CMDS to 10
44607 commit 2f781beb73ef24ab5fbe2688a83d07ad26c15972
44608 Author: Keith Packard <keithp@keithp.com>
44609 Date: Fri Apr 24 19:09:09 2009 -0700
44611 Move beep_init to end of file to be consistent with other files
44613 commit b99315cee4ab796376458a2442cf36806fa4aed3
44614 Author: Keith Packard <keithp@keithp.com>
44615 Date: Fri Apr 24 10:19:31 2009 -0700
44617 Update flight algorithm based on data collected from SN-1 Flight 1
44619 This now correctly sequences through the flight data collected from the
44620 first TeleMetrum test flight.
44622 This also completes up the flight algorithm test harness (ao_flight_test),
44623 which runs the flight algorithm on the Linux host from a captured data log.
44625 commit b32f2f0090ff967edac07ae4d7a9895ed0b96d31
44626 Author: Keith Packard <keithp@keithp.com>
44627 Date: Thu Apr 23 22:17:44 2009 -0700
44629 Add igniters and update flight control algorithm
44631 commit f155333ae18a25068644792e8940269d9fb28033
44632 Author: Keith Packard <keithp@keithp.com>
44633 Date: Fri Apr 24 00:15:09 2009 -0700
44635 Avoid ram from 0xfda2 through feff, its funky
44637 commit f9c1c545c9dc11c3190a6cf7504883131fffce2f
44638 Author: Keith Packard <keithp@keithp.com>
44639 Date: Thu Apr 23 22:18:33 2009 -0700
44641 remove ao_flight_test until its ready
44643 commit 86e73c009f78dc4664883353124fc891fbb01dce
44644 Author: Keith Packard <keithp@keithp.com>
44645 Date: Thu Apr 23 20:50:07 2009 -0700
44647 Add teledongle module
44649 commit 204daac71ad56926730f5d6860bd70c645302e19
44650 Author: Keith Packard <keithp@keithp.com>
44651 Date: Thu Apr 23 14:26:01 2009 -0700
44653 Set telemetry rate to 100ms
44655 commit 306b28f632e21b42ab165e7944283cf9764b590e
44656 Author: Keith Packard <keithp@keithp.com>
44657 Date: Thu Apr 23 14:23:26 2009 -0700
44659 Wrong license on ao_monitor.c
44661 commit dca3a6de26d26c0020f3fb2cf5d8ac1552c195b1
44662 Author: Keith Packard <keithp@keithp.com>
44663 Date: Thu Apr 23 14:23:00 2009 -0700
44665 Crank up radio to 10dBm
44667 commit fbe3096f7e9a8112dbc79f376eccdaa6872ae520
44668 Author: Keith Packard <keithp@keithp.com>
44669 Date: Wed Apr 22 16:03:28 2009 -0700
44673 commit 9b7788f18bbaf3c4e5ebbf6c5ebd926468b0e045
44674 Author: Keith Packard <keithp@keithp.com>
44675 Date: Wed Apr 22 15:55:01 2009 -0700
44677 Clean up TeleTerra files
44679 commit 61cee50c86e275f9fde875bd317c3e74255394ec
44680 Author: Keith Packard <keithp@keithp.com>
44681 Date: Wed Apr 22 15:53:55 2009 -0700
44683 simplify ao_time function
44685 commit 3703ecdc9e190f2e0b7ead0e71b78be881c1f3b7
44686 Author: Keith Packard <keithp@keithp.com>
44687 Date: Wed Apr 22 15:53:46 2009 -0700
44689 One line radio status
44691 commit 1fbb3c17672a03ea6318fee07f9c2dcd7a8d0b16
44692 Author: Keith Packard <keithp@keithp.com>
44693 Date: Wed Apr 22 15:49:16 2009 -0700
44695 Add new binaries to .gitignore
44697 commit 00d5610caff61559eb24c24beaa56629d6bb03be
44698 Author: Keith Packard <keithp@keithp.com>
44699 Date: Wed Apr 22 15:49:00 2009 -0700
44701 Speed up dbg port bit frobbing
44703 commit c7555eb16876aa8ff9fe7f648d325a1b8fb54d23
44704 Author: Keith Packard <keithp@keithp.com>
44705 Date: Wed Apr 22 15:48:28 2009 -0700
44709 commit ada6dea04b94be016598566c4c13e6105aaec353
44710 Author: Keith Packard <keithp@keithp.com>
44711 Date: Wed Apr 22 15:48:14 2009 -0700
44713 Clean up task list formatting
44715 commit 0a1b2297ee9f5bbb918bd72f26088a3e0b84839a
44716 Author: Keith Packard <keithp@keithp.com>
44717 Date: Wed Apr 22 15:47:57 2009 -0700
44719 Control radio monitoring with the M command
44721 commit 837c620f07b63efc171be3ac14c78bc99adf7592
44722 Author: Keith Packard <keithp@keithp.com>
44723 Date: Wed Apr 22 14:25:43 2009 -0700
44725 Shrink USB output buffers, work around USB packet errors
44727 commit d87e9c25947d7cc2eba8894a524977f2c55a089a
44728 Author: Keith Packard <keithp@keithp.com>
44729 Date: Tue Apr 21 02:07:24 2009 -0700
44731 Clean up telemetry now that all packets are the same
44733 commit 1b333def5052d2ed47fdeaef23a897fe326f6340
44734 Author: Keith Packard <keithp@keithp.com>
44735 Date: Tue Apr 21 02:07:08 2009 -0700
44737 Add longer debug delays to reset/debug_mode entry
44739 commit d1887ded41a5bfec8e10e9fd736fa9444b9b6222
44740 Author: Keith Packard <keithp@keithp.com>
44741 Date: Tue Apr 21 01:17:03 2009 -0700
44743 Fix up fancy dbg stuff. Add teleterra initial bits.
44745 The dbg stuff needed a bit of help to actually walk the tables; it appears
44746 that complex expressions confuse sdcc.
44748 This also adds primitive teleterra bits, but no UI, etc.
44750 Signed-off-by: Keith Packard <keithp@keithp.com>
44752 commit 43c8f7012102cdb591ace899420c10e4a78385ad
44753 Author: Keith Packard <keithp@keithp.com>
44754 Date: Mon Apr 20 23:33:41 2009 -0700
44756 Add radio support. Build separate executables for TeleMetrum and the TI dongle
44758 Ok, way too big a patch, but things were in rough shape.
44759 This patch adds support for the radio, both transmit and receive.
44760 Then, because I could no longer run the TeleMetrum code on the TI
44761 dongle, I ended up building a separate image for the TI board, which
44762 involved creating a mechanism for having multiple command sets and splitting
44763 code for different functions into different files.
44765 commit 5be13b76a2e29b84cd6d1eec065e3354b0dafce5
44766 Author: Keith Packard <keithp@keithp.com>
44767 Date: Sat Apr 18 23:19:24 2009 -0700
44769 Start using pdata area for less-frequently used data
44771 commit 3e18b5a0d4c7d84df98b6ed0b7783de1d42d45bf
44772 Author: Keith Packard <keithp@keithp.com>
44773 Date: Sat Apr 18 23:19:05 2009 -0700
44775 Slow down panic presentation
44777 commit c4e983daa4579896b227fdcb2be43fad75e94307
44778 Author: Keith Packard <keithp@keithp.com>
44779 Date: Sat Apr 18 23:17:45 2009 -0700
44781 Parse GPS data locally. Add 'g' command to display recent GPS results.
44783 This parses the GPS GGA message and stores it in a global variable,
44784 protected by a mutex.
44786 commit ed6f67dc47d750d5ff8bea63ae7cbb560689b9b6
44787 Author: Keith Packard <keithp@keithp.com>
44788 Date: Sat Apr 18 23:16:01 2009 -0700
44790 Add task names and 'T' command to show task status.
44792 The T command shows the current wchan and PC for each task in the system.
44794 commit 3d5a5fc4db5f681e848202c4ee4099d2879677d6
44795 Author: Keith Packard <keithp@keithp.com>
44796 Date: Sat Apr 18 19:32:18 2009 -0700
44798 Fix GPL version at 2
44800 Signed-off-by: Keith Packard <keithp@keithp.com>
44802 commit 022f83ca6fd589005d8eb3e25e633950fef69fa7
44803 Author: Keith Packard <keithp@keithp.com>
44804 Date: Fri Apr 17 23:38:14 2009 -0700
44806 Add gps, debug dongle support and pressure alt tables
44808 GPS also pulled in serial support. The altitude tables take raw 11-bit
44809 pressure sample numbers and convert them to standard pressure altitude
44812 Signed-off-by: Keith Packard <keithp@keithp.com>
44814 commit 31fce622b1bab7e3f421069d7f6d4d9bdcd825de
44815 Author: Keith Packard <keithp@keithp.com>
44816 Date: Fri Apr 17 10:32:45 2009 -0700
44818 Enable FEC in radio packets
44820 commit 293a357911090a2f37bdd6f7ea96942079ffdf2e
44821 Author: Keith Packard <keithp@keithp.com>
44822 Date: Fri Apr 17 10:29:42 2009 -0700
44824 Add CRC to radio packets
44826 commit 20834caf01ddf481e8362b0d2627ef383a82e09d
44827 Author: Keith Packard <keithp@keithp.com>
44828 Date: Fri Apr 17 10:23:10 2009 -0700
44832 commit 94e5343a72121a81ab19bf5025e6b6fc9847eb4f
44833 Author: Keith Packard <keithp@keithp.com>
44834 Date: Fri Apr 17 10:19:25 2009 -0700
44836 Add packet status byte defines
44838 commit 04bc51c170c6f22bb5cc16867ce9a307818a7a00
44839 Author: Keith Packard <keithp@keithp.com>
44840 Date: Fri Apr 17 10:11:31 2009 -0700
44842 Add separate xmit/recv programs to radio demo
44844 commit fafe55c3405964e0defdf25b6c00236f9aaefbc5
44845 Author: Keith Packard <keithp@keithp.com>
44846 Date: Fri Apr 17 10:11:11 2009 -0700
44848 Get env var for debug method selection
44850 commit 26095fc0511ee0d5213f038986032f7c59964cf0
44851 Author: Keith Packard <keithp@keithp.com>
44852 Date: Fri Apr 17 10:10:47 2009 -0700
44854 Run-time selection between cp2103 and cc1111
44856 commit 543bedde83cbce5145668e72965e02d892187b59
44857 Author: Keith Packard <keithp@keithp.com>
44858 Date: Thu Apr 16 20:38:14 2009 -0700
44862 commit 5e2393eb6b1a6d7b180bd63d5165ee7b7ff5f9e0
44863 Author: Keith Packard <keithp@keithp.com>
44864 Date: Wed Apr 15 14:25:26 2009 -0700
44866 Move a bunch of variables from __data to __xdata
44868 commit 4d1091d9bd121f05f5fe0a9c9d2bc0da8c562b9a
44869 Author: Keith Packard <keithp@keithp.com>
44870 Date: Tue Apr 14 21:25:15 2009 -0700
44872 Slow down panic code, disable interrupts
44874 commit 545478dd02eaeff6a65d318e722b1e4fce5e01b4
44875 Author: Keith Packard <keithp@keithp.com>
44876 Date: Tue Apr 14 21:24:25 2009 -0700
44878 Keep reporting flight state while it changes
44880 commit 9605045164882b4ca3d1317ac860b02513a51f30
44881 Author: Keith Packard <keithp@keithp.com>
44882 Date: Tue Apr 14 21:23:55 2009 -0700
44884 use red LED to indicate system startup
44886 commit dc844ee7e49a3b6145b3165252a592ed070d600f
44887 Author: Keith Packard <keithp@keithp.com>
44888 Date: Tue Apr 14 21:23:13 2009 -0700
44890 Use ao_ee_flush_internal while holding mutex
44892 commit 5e45d1c89b00e74d5b2730345843f43aab516af2
44893 Author: Keith Packard <keithp@keithp.com>
44894 Date: Tue Apr 14 21:22:56 2009 -0700
44896 Leave beeping and lights to the flight code
44898 commit 902c342289c1d13a4d55b9224acb6d67578b7a60
44899 Author: Keith Packard <keithp@keithp.com>
44900 Date: Tue Apr 14 21:22:31 2009 -0700
44902 Make mutex functions reentrant
44904 commit acc4fc635edb70ec1ba2dff9f7ac0c8542c72c47
44905 Author: Keith Packard <keithp@keithp.com>
44906 Date: Tue Apr 14 19:08:01 2009 -0700
44908 Add in existing flight pieces: flight/report/log
44910 These pieces come from the old telemetrum firmware.
44912 Signed-off-by: Keith Packard <keithp@keithp.com>
44914 commit ac99982b10fd5772218660137ee21db9b90cd885
44915 Author: Keith Packard <keithp@keithp.com>
44916 Date: Tue Apr 14 14:21:56 2009 -0700
44918 Add eeprom driver and command loop
44920 This involved adding dma control and a mutex implementation.
44922 Signed-off-by: Keith Packard <keithp@keithp.com>
44924 commit fbd8f4aff5058f4d371596b04715b7cb6d38e729
44925 Author: Keith Packard <keithp@keithp.com>
44926 Date: Tue Apr 14 11:04:09 2009 -0700
44928 Switch from --model-large to --model-small
44930 This shrinks the application quite a bit, and should make it faster as well.
44932 Signed-off-by: Keith Packard <keithp@keithp.com>
44934 commit fb63262699d3a6fbf347d24efda8b01f75b7d0d3
44935 Author: Keith Packard <keithp@keithp.com>
44936 Date: Tue Apr 14 10:02:19 2009 -0700
44938 Add comments, clean up white space, etc.
44940 Various clean ups now that the basic code appears to work.
44942 Signed-off-by: Keith Packard <keithp@keithp.com>
44944 commit 7e4abf3a40c39d0ce4f466281bef9a464df85dd4
44945 Author: Keith Packard <keithp@keithp.com>
44946 Date: Mon Apr 13 21:58:07 2009 -0700
44948 Switch USB to double-buffered
44950 commit b56a44e48552bc32dbba9ff21770c370219a684a
44951 Author: Keith Packard <keithp@keithp.com>
44952 Date: Mon Apr 13 21:51:59 2009 -0700
44954 Fix USB input/output by reloading packet limits.
44956 The USB controller is reset during the connection process, which clears the
44957 packet limits set in the controller at initialization time. Reload those
44958 values when the configuration is set.
44960 Signed-off-by: Keith Packard <keithp@keithp.com>
44962 commit cdaf3fc5802acf2ddc7972a15649ab0e1b31b873
44963 Author: Keith Packard <keithp@keithp.com>
44964 Date: Mon Apr 13 20:39:46 2009 -0700
44966 USB working up through reading strings
44968 commit c5c1e3fb1c253d387be02c127253ac2a55d577b4
44969 Author: Keith Packard <keithp@keithp.com>
44970 Date: Mon Apr 13 13:51:08 2009 -0700
44974 This offers a single CDC ACM device over USB.
44976 Signed-off-by: Keith Packard <keithp@keithp.com>
44978 commit f3f25a1cec7d2a034aa544569cfd23bea1a996c5
44979 Author: Keith Packard <keithp@keithp.com>
44980 Date: Sun Apr 12 23:53:55 2009 -0700
44982 Add beep/led support.
44984 Support our P2_0 connected buzzer, and formalize LED output support.
44986 Signed-off-by: Keith Packard <keithp@keithp.com>
44988 commit e14f07bfdb8824fc7ed6df1129c66ee39ffd6d54
44989 Author: Keith Packard <keithp@keithp.com>
44990 Date: Sun Apr 12 23:17:16 2009 -0700
44994 Sample A/D at the timer tick, placing data in a ring
44997 Signed-off-by: Keith Packard <keithp@keithp.com>
44999 commit 823f4f92de0c1f8dd7a644a8e56ffe9822bee6e2
45000 Author: Keith Packard <keithp@keithp.com>
45001 Date: Sun Apr 12 22:52:47 2009 -0700
45005 Use Timer 1 to generate a 100Hz timer interrupt
45007 commit 650a77e209dbb54c8d8fd9824cee430985564973
45008 Author: Keith Packard <keithp@keithp.com>
45009 Date: Sun Apr 12 21:58:49 2009 -0700
45013 commit 870e98334018a66de8a6e4a659d2dc5dee1cbecf
45014 Author: Keith Packard <keithp@keithp.com>
45015 Date: Sun Apr 12 21:52:56 2009 -0700
45019 commit 11c526bdcbf4012e18fbfdc29ca8832870ca38f0
45020 Author: Keith Packard <keithp@keithp.com>
45021 Date: Sun Apr 12 21:47:32 2009 -0700
45023 Add load command to s51
45025 commit 55402ba3e87fd699c51079843309f1f0d1534724
45026 Author: Keith Packard <keithp@keithp.com>
45027 Date: Sun Apr 12 21:33:55 2009 -0700
45029 Make test more complicated
45031 commit 3d3f849c9af9028f667cef4afedc0798d39a9efc
45032 Author: Keith Packard <keithp@keithp.com>
45033 Date: Sun Apr 12 21:33:46 2009 -0700
45035 SP points at last pushed byte
45037 commit f72c4cbc8fd9412dd1cce0fc446e7bbd2edc2d34
45038 Author: Keith Packard <keithp@keithp.com>
45039 Date: Sun Apr 12 20:27:03 2009 -0700
45043 commit 1903a86bf2cc6b685ccc475e62eabe49a4ec5b43
45044 Author: Keith Packard <keithp@keithp.com>
45045 Date: Sun Apr 12 20:25:39 2009 -0700
45047 Initial AltOS import
45049 commit 5221dc63cf3a059a32aca2bfa7828c215be814a1
45050 Author: Keith Packard <keithp@keithp.com>
45051 Date: Sun Apr 12 12:38:58 2009 -0700
45055 commit ee110425fb814780476d1d3d8a257af126f41763
45056 Author: Keith Packard <keithp@keithp.com>
45057 Date: Mon Apr 6 17:09:23 2009 -0700
45059 Bump buffer pointer as data is written to cc-usb
45061 commit 2d9b8a83a2d9f495199033e43f519d26f27938fe
45062 Author: Keith Packard <keithp@keithp.com>
45063 Date: Mon Apr 6 11:31:49 2009 -0700
45065 Add support for a serial-connected custom debug dongle
45067 This uses the cc1111 board as a custom debug dongle with faster
45068 methods for communicating with the debug target.
45070 commit 24edd56155ed0fa02fdd8f66fdc7aa5a1021bf7d
45071 Author: Keith Packard <keithp@keithp.com>
45072 Date: Wed Apr 1 17:50:47 2009 -0700
45074 Reset cc1111 on s51 exit
45076 commit 5fcfe854d29e1862d9a6adcbef3ef5119eb52fa3
45077 Author: Keith Packard <keithp@keithp.com>
45078 Date: Wed Apr 1 00:06:45 2009 -0700
45080 Add timer-based beep test
45082 commit 91607bebdd167ac632aca4b66e22cb0cabdf0d20
45083 Author: Keith Packard <keithp@keithp.com>
45084 Date: Thu Mar 26 22:41:47 2009 -0700
45086 Add readline support to s51
45088 commit 66ee94ed10e3d79b24f45a5c63e58456d4d30343
45089 Author: Keith Packard <keithp@keithp.com>
45090 Date: Wed Mar 25 11:37:48 2009 -0700
45092 Deal with MSB-outputing DMA engine
45094 commit d3732fd405af03c3752a84c4b78da7ef5ebd3744
45095 Author: Keith Packard <keithp@keithp.com>
45096 Date: Wed Mar 25 11:14:03 2009 -0700
45098 Flip ADC bytes around
45100 commit 50cc8e97e76d9b60c622962e1c74cf422dfb2c0f
45101 Author: Keith Packard <keithp@keithp.com>
45102 Date: Wed Mar 25 11:01:30 2009 -0700
45104 Add spacing for serial adc data
45106 commit 5577ca3762bfc000b0bc3782c73a8f95996a28a6
45107 Author: Keith Packard <keithp@keithp.com>
45108 Date: Wed Mar 25 10:58:57 2009 -0700
45110 Inc only one on dest addr
45112 commit 378227d869a3e8787c532c8c4e1563b44002c4b5
45113 Author: Keith Packard <keithp@keithp.com>
45114 Date: Wed Mar 25 10:55:17 2009 -0700
45116 Dump remaining inputs
45118 commit f54a41e37d6897db2e24fbc82880076b78a0ae41
45119 Author: Keith Packard <keithp@keithp.com>
45120 Date: Wed Mar 25 10:50:36 2009 -0700
45122 Remove poll for ti demo button
45124 commit 2b93a70fdd9e47e8195855451aa19ecad5d8b068
45125 Author: Keith Packard <keithp@keithp.com>
45126 Date: Wed Mar 25 10:50:14 2009 -0700
45128 Add adc to serial conversion
45130 commit d9fd548db15232e3a8823815962b252c7a5e7cba
45131 Author: Keith Packard <keithp@keithp.com>
45132 Date: Wed Mar 25 10:04:50 2009 -0700
45134 Add ADC via DMA example
45136 commit 61faf2b773300988fe27cfde5bc045be9950a1b0
45137 Author: Keith Packard <keithp@keithp.com>
45138 Date: Wed Mar 25 09:45:14 2009 -0700
45142 commit 7b3fdf5b42c9be9bebc1ceb7a52ff0f5a2a28fcd
45143 Author: Keith Packard <keithp@keithp.com>
45144 Date: Wed Mar 25 01:05:36 2009 -0700
45148 commit 31d59b88baa2cd96dc6263d1c5877283f2cd8c36
45149 Author: Keith Packard <keithp@keithp.com>
45150 Date: Wed Mar 25 01:03:08 2009 -0700
45152 Make radio test compile again
45154 commit 9ce713fdd19bf1a51370dacba3670504356c5c11
45155 Author: Keith Packard <keithp@keithp.com>
45156 Date: Wed Mar 25 01:02:07 2009 -0700
45158 Wait for xtal to stabilize
45160 commit ffd43886dc902f3bb7407294018e3d62cac39480
45161 Author: Keith Packard <keithp@keithp.com>
45162 Date: Wed Mar 25 00:55:11 2009 -0700
45166 commit 029963cc94fbb47560118b5de73c537e2c14ed7c
45167 Author: Keith Packard <keithp@keithp.com>
45168 Date: Wed Mar 25 00:50:02 2009 -0700
45170 Eliminate array walking
45172 commit 019456a17d36f8f9f9b72cfbc980492175086d32
45173 Author: Keith Packard <keithp@keithp.com>
45174 Date: Wed Mar 25 00:41:49 2009 -0700
45176 Add a per-char delay
45178 commit cfaf187e96ba98eb8dd934409a10bc70273fe68a
45179 Author: Keith Packard <keithp@keithp.com>
45180 Date: Wed Mar 25 00:36:35 2009 -0700
45182 Use UTX1IF to wait for serial TX complete
45184 commit 006124529b243c7657a94312d2c868a82878d8bb
45185 Author: Keith Packard <keithp@keithp.com>
45186 Date: Wed Mar 25 00:29:29 2009 -0700
45188 Send more interesting text
45190 commit 5049acd3d1ae42304513f667f55a2ddffa4c685a
45191 Author: Keith Packard <keithp@keithp.com>
45192 Date: Wed Mar 25 00:24:56 2009 -0700
45194 More random serial bit frobbing
45196 commit 50bdc2407c674a4770912d3a626f36820a7f1527
45197 Author: Keith Packard <keithp@keithp.com>
45198 Date: Wed Mar 25 00:13:15 2009 -0700
45200 Flip serial TX code around a bit
45202 commit 7b7617e376afe0df1d505375b76198358330370c
45203 Author: Keith Packard <keithp@keithp.com>
45204 Date: Wed Mar 25 00:09:47 2009 -0700
45206 Try serial polarity high/high
45208 commit 18edacdb1e6e429cc29a164e22ef2a566096b9d9
45209 Author: Keith Packard <keithp@keithp.com>
45210 Date: Wed Mar 25 00:06:32 2009 -0700
45212 Make serial test simpler
45214 commit 62744c186792739c3bf5798c80ff87c69fbe2b65
45215 Author: Keith Packard <keithp@keithp.com>
45216 Date: Wed Mar 25 00:03:45 2009 -0700
45218 Flip start/stop bits around
45220 commit 9e96107d5d1a9681b07c36bb5860c748bfe10ec0
45221 Author: Keith Packard <keithp@keithp.com>
45222 Date: Tue Mar 24 23:57:12 2009 -0700
45226 commit c41ceb9a488b2209d1d3c09967d1473ce608030f
45227 Author: Keith Packard <keithp@keithp.com>
45228 Date: Tue Mar 24 23:24:01 2009 -0700
45230 Change radio to -30dBm
45232 commit c35de083ca3d4f362063b056a0fd74ffe629d168
45233 Author: Keith Packard <keithp@keithp.com>
45234 Date: Tue Mar 24 23:11:48 2009 -0700
45236 Add serial test program
45238 commit 8ecbd8734f0fb5588b2a8eb20720cfc6f43dfb47
45239 Author: Keith Packard <keithp@keithp.com>
45240 Date: Tue Mar 24 22:37:38 2009 -0700
45242 Wait for xtal to stabilize after changing to 24MHz
45244 commit e120269fc0f8e14ddf1755337b1d092173e16da2
45245 Author: Keith Packard <keithp@keithp.com>
45246 Date: Tue Mar 24 22:21:31 2009 -0700
45248 Actually return byte read from SPI
45250 commit de1ac6f99a1526fa840a52cfc10fa3edc0589bed
45251 Author: Keith Packard <keithp@keithp.com>
45252 Date: Tue Mar 24 22:12:51 2009 -0700
45254 Clear UxCSR_TX_BYTE after transmitting a byte
45256 commit 3ed3ff63e46767a256d30c5da5c52ae20089a91d
45257 Author: Keith Packard <keithp@keithp.com>
45258 Date: Tue Mar 24 20:04:58 2009 -0700
45260 Led the LED turn on
45262 commit 91b3a6ae74184692f45702587c4d678b2799ad8c
45263 Author: Keith Packard <keithp@keithp.com>
45264 Date: Tue Mar 24 19:55:04 2009 -0700
45266 actually write and compare SPI test bits
45268 commit 7de3a43887485c3c6cf52960376ccde33fb33985
45269 Author: Keith Packard <keithp@keithp.com>
45270 Date: Tue Mar 24 19:54:02 2009 -0700
45272 Add USART-based SPI test code
45274 commit ef0eef68280e9b6ca5e3bb71062e23054340e1ed
45275 Author: Keith Packard <keithp@keithp.com>
45276 Date: Tue Mar 24 17:22:36 2009 -0700
45278 Change spi test string
45280 commit 8131389ee5018c05b721146a98367150cf500fdf
45281 Author: Keith Packard <keithp@keithp.com>
45282 Date: Tue Mar 24 17:15:09 2009 -0700
45284 Oops, not merging in the bit read for SPI test
45286 commit 3429016d1359ec650993d2fb0596184e3f717871
45287 Author: Keith Packard <keithp@keithp.com>
45288 Date: Tue Mar 24 17:04:45 2009 -0700
45290 Adjust clock/data phase for spi test
45292 commit fedd18b28ea54e1dabcd2f9e8cab3ae4ee0fd070
45293 Author: Keith Packard <keithp@keithp.com>
45294 Date: Tue Mar 24 16:35:13 2009 -0700
45296 MISO needs to be an input
45298 commit f0c233f25a208a636833312b1766825815735304
45299 Author: Keith Packard <keithp@keithp.com>
45300 Date: Tue Mar 24 15:41:55 2009 -0700
45302 Add bit-banging spi eeprom test program
45304 commit 6eeee64cf16ccc9218dbdde5426f25bda5e3407f
45305 Author: Bdale Garbee <bdale@gag.com>
45306 Date: Wed Mar 18 02:58:33 2009 -0600
45308 working beep at around 4khz
45310 commit 4726317de811c20e8d6754762437b5c9cbb3a48c
45311 Author: Keith Packard <keithp@keithp.com>
45312 Date: Wed Mar 18 01:54:34 2009 -0700
45314 Add simple test program to light up the transmitter at 434.550MHz
45316 This starts a transmit sequence, but doesn't send any data so the
45317 transmitter just locks on.
45319 commit a0a27600ee2bf237e74eb83767a8d2e7c91df24f
45320 Author: Keith Packard <keithp@keithp.com>
45321 Date: Sun Mar 15 18:14:21 2009 -0700
45323 Correctly comment which bit the beep program uses
45325 commit 25b77d236c01258abfc03114c2fc9ea2d69ca6e7
45326 Author: Keith Packard <keithp@keithp.com>
45327 Date: Sun Mar 15 18:11:53 2009 -0700
45329 Add telemetrum beeper example
45331 commit 164b4e4749ad64ebbe26e84fd7b4fa1aa733dbe4
45332 Author: Keith Packard <keithp@keithp.com>
45333 Date: Sun Mar 15 18:11:20 2009 -0700
45335 sdcc gets the lib path correct based on the model
45337 commit 04a316133af93b79bfbebb91f05eec1015ec2abc
45338 Author: Keith Packard <keithp@keithp.com>
45339 Date: Sun Mar 15 18:10:43 2009 -0700
45341 Bump debug speed back up
45343 commit 9fd63972758d6d5572f7bcaadec9b1c0e974a2e8
45344 Author: Keith Packard <keithp@keithp.com>
45345 Date: Sat Mar 7 21:05:40 2009 -0800
45347 Only flip changing bits in async mode
45349 commit c8fd04e154bcfd65ae1200980bd8163caabd7fe4
45350 Author: Keith Packard <keithp@keithp.com>
45351 Date: Sat Mar 7 21:05:06 2009 -0800
45353 The debug port only works if reset is higher than clock. weird
45355 commit ade11f88754b4ab0386ebf86afc5257e59238f62
45356 Author: Keith Packard <keithp@keithp.com>
45357 Date: Sat Mar 7 21:04:38 2009 -0800
45359 Make manual bit flipping sync after every transaction
45361 commit e63b5271bb54afc36e4b9891e51e053ff6011092
45362 Author: Keith Packard <keithp@keithp.com>
45363 Date: Sat Mar 7 14:49:22 2009 -0800
45367 commit 77d754afc2d14aaa4413c13ebe3777ef385f62a9
45368 Author: Keith Packard <keithp@keithp.com>
45369 Date: Sat Mar 7 14:48:49 2009 -0800
45371 Sync after manual bit reading
45373 commit 5a338c8a7394d003355f96a8777b6fe83bb8493c
45374 Author: Keith Packard <keithp@keithp.com>
45375 Date: Sat Mar 7 14:48:35 2009 -0800
45377 Flip debug pins around to match telemetrum
45379 commit cc0495b7028f4b1189a00707d828a68534d1dea2
45380 Author: Keith Packard <keithp@keithp.com>
45381 Date: Fri Mar 6 22:52:35 2009 -0800
45383 Wait for a while when switching the RESET_N line
45385 The cc1111 manual suggests placing a 2.7kΩ resister and 1nF capacitor on the
45386 RESET_N line to filter out noise. This increases the time necessary to reset
45387 the chip to several microseconds which is longer than the interval between
45388 two USB packets. Flush the USB packet queue and sleep for a while after
45389 changing the value on the RESET_N line to make sure the chip sees the state
45392 Signed-off-by: Keith Packard <keithp@keithp.com>
45394 commit 41289e6d8f1767547a33fea349866e928e44910f
45395 Author: Bdale Garbee <bdale@gag.com>
45396 Date: Mon Mar 2 07:46:20 2009 -0700
45398 minor s51.1 formatting fixes
45400 Signed-off-by: Keith Packard <keithp@keithp.com>
45402 commit fdee231ed097a4348aee78fbd4aa92826b80de03
45403 Author: Keith Packard <keithp@keithp.com>
45404 Date: Sun Mar 1 23:12:31 2009 -0800
45408 This documents (briefly) the s51 hex debugging interface program, including
45409 some simple commands to test the operation of the system interactively.
45411 Signed-off-by: Keith Packard <keithp@keithp.com>
45413 commit f7d91bd23b8214e09deae0aafb516331e934c49b
45414 Author: Keith Packard <keithp@keithp.com>
45415 Date: Sun Mar 1 18:43:03 2009 -0800
45417 Sometimes the link breaks and the GET_PC command returns garbage
45419 commit 3cc8d11eb8d5d0b42141dd84a58d461287f59e3a
45420 Author: Keith Packard <keithp@keithp.com>
45421 Date: Sun Jan 25 08:38:48 2009 -0800
45423 Support 'set' command
45425 The 'set' command modifies target memory and registers
45427 Signed-off-by: Keith Packard <keithp@keithp.com>
45429 commit 60940b4be23962db79b8e914ec943d0636dd68ad
45430 Author: Keith Packard <keithp@keithp.com>
45431 Date: Mon Jan 5 21:45:21 2009 -0800
45433 Expose ccdbg_set_clock API
45435 This allows applications to change the debug port clock
45438 Signed-off-by: Keith Packard <keithp@keithp.com>
45440 commit eb09e61b0682eb2aeac8e1a34d58b897ba6db8e7
45441 Author: Keith Packard <keithp@keithp.com>
45442 Date: Mon Jan 5 21:44:44 2009 -0800
45444 Use custom sdcc libraries (this needs to be configured...)
45446 Signed-off-by: Keith Packard <keithp@keithp.com>
45448 commit 1ccfe0887c794397131ab1c986c25f66eea86a6c
45449 Author: Keith Packard <keithp@keithp.com>
45450 Date: Mon Jan 5 21:43:44 2009 -0800
45452 Have S51 ignore SIGINT while running under sdcdb.
45454 This prevents keyboard interrupts from accidentally stopping
45457 Signed-off-by: Keith Packard <keithp@keithp.com>
45459 commit 7c03937b36aac82b08f4ea0c6da33a994fe15ec7
45460 Author: Keith Packard <keithp@keithp.com>
45461 Date: Tue Dec 30 22:40:13 2008 -0800
45463 Add simple and timer sample programs
45465 Signed-off-by: Keith Packard <keithp@keithp.com>
45467 commit 6c2a65c743a4ffae96ed27dbc38c1bf9242ed1df
45468 Author: Keith Packard <keithp@keithp.com>
45469 Date: Tue Dec 30 22:35:53 2008 -0800
45471 Save/restore registers to host during memory operations. Cache ROM data.
45473 Because the debug port uses instructions for most operations, the debug code
45474 will clobber registers used by the running program. Save and restore these
45475 to avoid corrupting application data.
45477 If the ROM file is known, use that to return data instead of fetching it
45478 from the target to improve performance.
45480 Signed-off-by: Keith Packard <keithp@keithp.com>
45482 commit ea366058aa467a8a7caf17e7014758f3741ea7f7
45483 Author: Keith Packard <keithp@keithp.com>
45484 Date: Mon Dec 29 12:35:11 2008 -0800
45486 Fix flashing less than a full page of data. Verify page at a time.
45488 The 8051 flashing code requires special help with counts with non-zero low
45489 byte. Also, instead of verifying the entire flash contents at the end,
45490 verify each page as it goes.
45492 Signed-off-by: Keith Packard <keithp@keithp.com>
45494 commit e0697186a2f9b6139636ff5d5c162879c85caf9c
45495 Author: Keith Packard <keithp@keithp.com>
45496 Date: Sun Dec 28 00:11:13 2008 -0800
45498 Use SFR access funcs. Support 'dump' command. Add -m (monitor) flag.
45500 Not all SFRs are visible in the unified address space, so the SFR-specific
45501 accessors are required.
45503 The dump command is the same as the various 'd*'
45504 commands, but also supports dumping program memory.
45506 The new -m (monitor) flag watches the command stream between s51 and sdcdb.
45508 Signed-off-by: Keith Packard <keithp@keithp.com>
45510 commit 23aca1fcbc169184e32d4ec19f28dd4fd4cfda36
45511 Author: Keith Packard <keithp@keithp.com>
45512 Date: Sun Dec 28 00:09:30 2008 -0800
45514 Save/restore regs when reading/writing memory. Add SFR access.
45516 The DPL and ACC registers are used by the memory access code,
45517 so they need to be saved and restored. Stuff them up high in ram for now;
45518 this should probably be fixed to pull them back to the host instead.
45520 Special SFR access is required as not all SFRs are visible in the unified
45523 Signed-off-by: Keith Packard <keithp@keithp.com>
45525 commit 1405838160b69e2cda456e21502a1d03b3aa7548
45526 Author: Keith Packard <keithp@keithp.com>
45527 Date: Sat Dec 27 11:25:58 2008 -0800
45529 s51: get start address from ihx file. re-enable breakpoints after reset.
45531 Use the start of the ihx file when asked to run from 0x0, this lets
45532 sdcdb run programs from ram.
45534 The reset command clears all hw breakpoints, so reset them afterwards.
45536 Signed-off-by: Keith Packard <keithp@keithp.com>
45538 commit 1264c3676e95427bba5d01e05c303d036a7f9eca
45539 Author: Keith Packard <keithp@keithp.com>
45540 Date: Fri Dec 26 23:05:04 2008 -0800
45542 Switch to libusb-1.0 and use async interface.
45544 The async libusb interface offers substantial performance benefits by not
45545 making each command wait for the reply. This makes talking over this
45546 interface almost reasonable.
45548 Signed-off-by: Keith Packard <keithp@keithp.com>
45550 commit d2d9cfd74fd66836c913c02276e09136d83b35dc
45551 Author: Keith Packard <keithp@keithp.com>
45552 Date: Fri Dec 26 17:58:48 2008 -0800
45554 s51: add breakpoints and the ability to block awaiting a breakpoint.
45556 Signed-off-by: Keith Packard <keithp@keithp.com>
45558 commit 4c4093c3fdd309123fdd068c0e1ff4947104492d
45559 Author: Keith Packard <keithp@keithp.com>
45560 Date: Mon Dec 22 19:11:56 2008 -0800
45562 Add more commands to s51 assembly-language debugger
45564 Signed-off-by: Keith Packard <keithp@keithp.com>
45566 commit 55eba4fa08b022197106245d36a70f575a070b0a
45567 Author: Keith Packard <keithp@keithp.com>
45568 Date: Mon Dec 22 19:10:27 2008 -0800
45570 Make read_memory debug output use ccdbg_debug.
45572 This makes it default to not being presented, which makes s51 much happier
45574 Signed-off-by: Keith Packard <keithp@keithp.com>
45576 commit e75918f3667a5c8ad294bec4acef6fe81682edf6
45577 Author: Keith Packard <keithp@keithp.com>
45578 Date: Sun Dec 21 23:33:35 2008 -0800
45580 Add preliminary version of s51, a UI clone of the 8051 emulator.
45582 sdcdb provides source-level debugging using the 8051 emulator, s51. By
45583 emulating that emulator a the UI level, we should be able to get source
45584 debugging right on our target platform.
45586 This is just the preliminary structure for the program with most commands
45587 not yet implemented.
45589 commit f7d49868aeae80d515b12a7e339628f1296754a6
45590 Author: Keith Packard <keithp@keithp.com>
45591 Date: Sat Dec 20 23:30:06 2008 -0800
45593 Cleanup work; separating out the cp interface to be more abstract.
45595 Signed-off-by: Keith Packard <keithp@keithp.com>
45597 commit 30f23f23a6db3d12fdc9c088cf6ab47c5e5077fb
45598 Author: Keith Packard <keithp@keithp.com>
45599 Date: Fri Dec 19 21:13:04 2008 -0800
45601 Clean up autotools stuff.
45603 Signed-off-by: Keith Packard <keithp@keithp.com>
45605 commit 9025eb792861930e6af918d2727c4f5d97a69936
45606 Author: Keith Packard <keithp@keithp.com>
45607 Date: Fri Dec 19 21:11:45 2008 -0800
45611 Signed-off-by: Keith Packard <keithp@keithp.com>
45613 commit ab909db28307cfbf7ee8d692506bb79d7ffd627a
45614 Author: Keith Packard <keithp@keithp.com>
45615 Date: Fri Dec 19 19:08:13 2008 -0800
45619 commit cc8db276bc4f2fd7eb00168a5c0689a8457a5c6f
45620 Author: Keith Packard <keithp@keithp.com>
45621 Date: Fri Dec 19 19:07:37 2008 -0800
45623 Move blink example to subdir
45625 Signed-off-by: Keith Packard <keithp@keithp.com>
45627 commit 82e2d7ebed6682062dc400478c736bd6c91195c9
45628 Author: Keith Packard <keithp@keithp.com>
45629 Date: Fri Dec 19 19:04:26 2008 -0800
45631 Clean up makefiles, move ihx files to .ihx
45633 commit 52fb5f795adfd7f62e5b6dbe65877d14361cfdae
45634 Author: Keith Packard <keithp@keithp.com>
45635 Date: Fri Dec 19 14:39:57 2008 -0800
45639 commit 4ecfc33f16aa36b315519e6f279da65374b67aba
45640 Author: Keith Packard <keithp@keithp.com>
45641 Date: Fri Dec 19 14:37:53 2008 -0800
45643 Add cc1111 isr stub example
45645 commit d32e6658c3e489b62ba3cf6d22e3ab177b9b8a3a
45646 Author: Keith Packard <keithp@keithp.com>
45647 Date: Fri Dec 19 14:37:29 2008 -0800
45649 Add blink-tiny flash and ram versions
45651 commit b4d1127ef007843c643b778b3b2f6b915b1d5d9a
45652 Author: Keith Packard <keithp@keithp.com>
45653 Date: Fri Dec 19 14:19:29 2008 -0800
45655 Flash multiple pages. Eliminate off-by-one error in hex_image length.
45657 Signed-off-by: Keith Packard <keithp@keithp.com>
45659 commit 55995515b9d4fc1e193039eab697c5d03db417c2
45660 Author: Keith Packard <keithp@keithp.com>
45661 Date: Fri Dec 19 11:04:16 2008 -0800
45663 Add flash writing code.
45665 Signed-off-by: Keith Packard <keithp@keithp.com>
45667 commit 0bc52385b8f86f9ca1c450ad106e6d8afe3bc153
45668 Author: Keith Packard <keithp@keithp.com>
45669 Date: Thu Dec 18 12:37:32 2008 -0800
45673 Signed-off-by: Keith Packard <keithp@keithp.com>
45675 commit 3779cc8b32cac3640f42bd0400d4199ddae965a1
45676 Author: Keith Packard <keithp@keithp.com>
45677 Date: Thu Dec 18 12:17:41 2008 -0800
45681 Signed-off-by: Keith Packard <keithp@keithp.com>
45683 commit dc03adc179669d41e3551d74b3c5a60db41ff217
45684 Author: Keith Packard <keithp@keithp.com>
45685 Date: Thu Dec 18 12:07:06 2008 -0800
45687 Add ability to load Intel HEX files. Add sample sdcc LED blinker.
45689 Signed-off-by: Keith Packard <keithp@keithp.com>
45691 commit 807e2adacb025af77bb53c03209e9c8e0d7a5f95
45692 Author: Keith Packard <keithp@keithp.com>
45693 Date: Thu Dec 18 00:18:50 2008 -0800
45695 Add ability to read/write arbitrary memory. Write LED blinker program.
45697 Signed-off-by: Keith Packard <keithp@keithp.com>
45699 commit 8c879bf51c14a5928135d59211facd72f6a32808
45700 Author: Keith Packard <keithp@keithp.com>
45701 Date: Wed Dec 17 23:15:47 2008 -0800
45703 Move manual bit-banging debug code to separate file
45705 Signed-off-by: Keith Packard <keithp@keithp.com>
45707 commit aec3bbce84a5ceb92060a4b3889379f2af2404ac
45708 Author: Keith Packard <keithp@keithp.com>
45709 Date: Wed Dec 17 23:15:19 2008 -0800
45711 reduce clock to 50us
45713 Signed-off-by: Keith Packard <keithp@keithp.com>
45715 commit fa168f963f8b00144d12aa2770e9c0917cfae123
45716 Author: Keith Packard <keithp@keithp.com>
45717 Date: Wed Dec 17 23:12:59 2008 -0800
45719 Fill out ccdbg-command to support all debug commands.
45721 Signed-off-by: Keith Packard <keithp@keithp.com>
45723 commit 5df84df7cd6a31527dcfd11030f00ef9d8abf170
45724 Author: Keith Packard <keithp@keithp.com>
45725 Date: Wed Dec 17 22:24:59 2008 -0800
45727 Clean up bitbanging layer. Add debug printfs.
45729 Signed-off-by: Keith Packard <keithp@keithp.com>
45731 commit 584e28bac8af38de433767e017977ed1adddeb36
45732 Author: Keith Packard <keithp@keithp.com>
45733 Date: Wed Dec 17 12:32:15 2008 -0800
45735 Clean up sample debug files
45737 Signed-off-by: Keith Packard <keithp@keithp.com>
45739 commit e64b4dbf15e9ee1cb0de002985de7575e83d46e9
45740 Author: Keith Packard <keithp@keithp.com>
45741 Date: Mon Dec 8 17:25:28 2008 -0800
45743 Add support for input-only lines (-)
45745 commit 4f38974a9941cddaba27c17c5a46f923db386c94
45746 Author: Keith Packard <keithp@keithp.com>
45747 Date: Sat Dec 6 16:32:27 2008 -0800
45749 Add another example
45751 commit 3709ec3205cfb152b6568f3ea505c67fe7504c2a
45752 Author: Keith Packard <keithp@keithp.com>
45753 Date: Sat Dec 6 16:32:12 2008 -0800
45755 Add libusb support and lots more examples
45757 commit 39801e6e9fb9388072ee414a447f74095a6ac960
45758 Author: Keith Packard <keithp@keithp.com>
45759 Date: Fri Nov 28 22:57:07 2008 -0800
45763 commit 01cb2799875e086ee6096627c058ee235bbc33d5
45764 Author: Keith Packard <keithp@keithp.com>
45765 Date: Thu Nov 27 17:07:15 2008 -0800
45767 Add prototypes, add stub mainline, add .gitignore
45769 commit 0ffe4ef870b0e564789a1990aeab5b6651868e5b
45770 Author: Keith Packard <keithp@keithp.com>
45771 Date: Thu Nov 27 12:33:40 2008 -0800
45773 cc1111 debug port access through cp2103 serial chip