Adjust soldermask to pass freedfm tests

1. Fix new M2.5 holes by copying old ones.
2. Fix s-pwson-n6. Library footprint for this was fixed some time ago.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/telemini.pcb b/telemini.pcb
index d639868a2fffa441ab0eb5896b7988ba3cacf290..4672351249a64498f64c16daf526d8323403b5f7 100644 (file)
--- a/telemini.pcb
+++ b/telemini.pcb
@@ -1083,14 +1083,14 @@ Element["" "s-pwson-n6" "U1" "TPS71433" 1091.00mil 426.00mil -68.00mil 29.00mil
 (
        Pin[-35.43mil 0.0000 39.40mil 12.00mil 0.0000 15.00mil "GND" "7" "via,thermal(1S,3S)"]
        Pin[35.43mil 0.0000 39.40mil 12.00mil 0.0000 15.00mil "GND" "7" "via,thermal(1S,3S)"]
-       Pad[-11.81mil 0.0000 11.81mil 0.0000 39.37mil 0.0000 42.13mil "7" "7" "square,nopaste"]
-       Pad[-9.88mil 0.0000 9.88mil 0.0000 32.94mil 0.0000 42.13mil "7" "7" "square"]
-       Pad[-25.59mil 33.46mil -25.59mil 49.21mil 11.81mil 12.20mil 14.57mil "1" "1" "square,edge2"]
-       Pad[-25.59mil -49.21mil -25.59mil -33.46mil 11.81mil 12.20mil 14.57mil "6" "6" "square"]
-       Pad[0.0000 33.46mil 0.0000 49.21mil 11.81mil 12.20mil 14.57mil "2" "2" "square,edge2"]
-       Pad[0.0000 -49.21mil 0.0000 -33.46mil 11.81mil 12.20mil 14.57mil "5" "5" "square"]
-       Pad[25.59mil 33.46mil 25.59mil 49.21mil 11.81mil 12.20mil 14.57mil "3" "3" "square,edge2"]
-       Pad[25.59mil -49.21mil 25.59mil -33.46mil 11.81mil 12.20mil 14.57mil "4" "4" "square"]
+       Pad[-11.81mil 0.0000 11.81mil 0.0000 39.37mil 0.0000 45.43mil "7" "7" "square,nopaste"]
+       Pad[-9.88mil 0.0000 9.88mil 0.0000 32.94mil 0.0000 45.43mil "7" "7" "square"]
+       Pad[-25.59mil 33.46mil -25.59mil 49.21mil 11.81mil 12.20mil 17.87mil "1" "1" "square,edge2"]
+       Pad[-25.59mil -49.21mil -25.59mil -33.46mil 11.81mil 12.20mil 17.87mil "6" "6" "square"]
+       Pad[0.0000 33.46mil 0.0000 49.21mil 11.81mil 12.20mil 17.87mil "2" "2" "square,edge2"]
+       Pad[0.0000 -49.21mil 0.0000 -33.46mil 11.81mil 12.20mil 17.87mil "5" "5" "square"]
+       Pad[25.59mil 33.46mil 25.59mil 49.21mil 11.81mil 12.20mil 17.87mil "3" "3" "square,edge2"]
+       Pad[25.59mil -49.21mil 25.59mil -33.46mil 11.81mil 12.20mil 17.87mil "4" "4" "square"]
        ElementLine [-39.37mil -39.37mil 39.37mil -39.37mil 10.00mil]
        ElementLine [39.37mil -39.37mil 39.37mil 39.37mil 10.00mil]
        ElementLine [-39.37mil 39.37mil 39.37mil 39.37mil 10.00mil]
@@ -1379,16 +1379,16 @@ Element["" "0402" "C176" "2.2pF" 1415.00mil 8.3246mm -12.00mil 0.5908mm 1 40 ""]
 
        )
 
-Element["onsolder" "hole-M2.5" "H2" "unknown" 1585.00mil 415.00mil -37.00mil 27.00mil 0 60 "auto"]
+Element["hidename,onsolder" "hole-M2.5" "H2" "unknown" 1585.00mil 415.00mil -37.00mil 27.00mil 0 60 "auto"]
 (
-       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(3S)"]
+       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(1S,3S)"]
        ElementArc [0.0000 0.0000 80.00mil 80.00mil 0 360 10.00mil]
 
        )
 
-Element["onsolder" "hole-M2.5" "H1" "unknown" 1585.00mil 85.00mil -23.52mil 31.00mil 0 60 "auto"]
+Element["hidename,onsolder" "hole-M2.5" "H1" "unknown" 1585.00mil 85.00mil -23.52mil 31.00mil 0 60 "auto"]
 (
-       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(3S)"]
+       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(1S,3S,4S)"]
        ElementArc [0.0000 0.0000 80.00mil 80.00mil 0 360 10.00mil]
 
        )
@@ -1576,17 +1576,15 @@ Element["" "0402" "R14" "27k" 5.6962mm 267.00mil -0.4384mm -12.00mil 0 40 ""]
 
        )
 
-Element["hidename" "hole-M2.5" "H3" "unknown" 85.00mil 85.00mil -24.00mil -29.00mil 0 100 ""]
+Element["hidename,onsolder" "hole-M2.5" "H3" "unknown" 85.00mil 85.00mil -24.00mil -29.00mil 0 100 ""]
 (
-       Pin[0.0000 0.0000 112.00mil 20.00mil 112.00mil 98.00mil "pin1" "1" "usetherm,thermal(0X)"]
-       ElementArc [0.0000 0.0000 80.00mil 80.00mil 0 360 10.00mil]
+       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(3S)"]
 
        )
 
-Element["hidename" "hole-M2.5" "H4" "unknown" 85.00mil 415.00mil -25.00mil -28.00mil 0 100 ""]
+Element["hidename,onsolder" "hole-M2.5" "H4" "unknown" 85.00mil 415.00mil -25.00mil -28.00mil 0 100 ""]
 (
-       Pin[0.0000 0.0000 112.00mil 20.00mil 112.00mil 98.00mil "pin1" "1" "usetherm,thermal(0X)"]
-       ElementArc [0.0000 0.0000 80.00mil 80.00mil 0 360 10.00mil]
+       Pin[0.0000 0.0000 120.00mil 20.00mil 126.00mil 98.00mil "1" "1" "usetherm,thermal(3)"]
 
        )