| 2010-01-11 |
Bdale Garbee | change reset cap back from 1uF to 0.001uF, note that...
|
commit | commitdiff | tree |
| 2010-01-07 |
Bdale Garbee | use glabels and a specially tweaked .csv file to make...
|
commit | commitdiff | tree |
| 2010-01-07 |
Bdale Garbee | two resistor suffixes propagated to pcb file
|
commit | commitdiff | tree |
| 2010-01-02 |
Bdale Garbee | attribute cleanups
|
commit | commitdiff | tree |
| 2010-01-02 |
Bdale Garbee | take excel files out of zip creation, there's no way...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | snapshot for assembly quote
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | fix soldermask clearance on gps patch pin
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | a few schematic tweaks, mostly cosmetic
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | update pcb to reflect use of v_charge for GPS vbat
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | switch GPS chip from v_lipo to v_charge so it gets...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | move to 16mbit dataflash part since nobody has 32mbit...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | tweak attribs to reflect parts that are actually in...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | more copper and mask tweaking
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | fixing soldermask relief issues, etc, identified by...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | add soldermask clearance to index holes on micromatch...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | up annular ring design rule to 7 mils, update vias...
|
commit | commitdiff | tree |
| 2009-12-18 |
Bdale Garbee | upgraded geda-gaf to 1.6.0, used gattrib to clean up...
|
commit | commitdiff | tree |
| 2009-12-17 |
Bdale Garbee | move pin 19 on Venus from RF ground to system ground...
|
commit | commitdiff | tree |
| 2009-12-12 |
Bdale Garbee | swap cs0 and cs1 pin assignments on cc1111
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | update panel in case we ever decide to have raw pcbs...
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | make pyro connector a noload so we can choose AMP or...
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | fixed u.fl refdes
|
commit | commitdiff | tree |
| 2009-12-11 |
Bdale Garbee | cleaning up top layer silk
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | fix solder mask dimension on beeper pins
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | update pcb to use correct locking footprint for companion...
|
commit | commitdiff | tree |
| 2009-12-10 |
Bdale Garbee | working on attributes to be able to put board out for...
|
commit | commitdiff | tree |
| 2009-12-09 |
Bdale Garbee | combine gps and cc1111 reset inputs into one net, eliminatin...
|
commit | commitdiff | tree |
| 2009-12-09 |
Bdale Garbee | shoving connector side silk around to avoid vias
|
commit | commitdiff | tree |
| 2009-12-08 |
Bdale Garbee | change to plated holes for MicroMaTch connector index...
|
commit | commitdiff | tree |
| 2009-12-08 |
Bdale Garbee | various improvements in the layout
|
commit | commitdiff | tree |
| 2009-12-06 |
Bdale Garbee | re-arrange pins on companion board connector at Keith...
|
commit | commitdiff | tree |
| 2009-12-04 |
Bdale Garbee | all DRC issues resolved
|
commit | commitdiff | tree |
| 2009-12-03 |
Bdale Garbee | fixing DRC issues
|
commit | commitdiff | tree |
| 2009-12-03 |
Bdale Garbee | added silk area for serial number, etc
|
commit | commitdiff | tree |
| 2009-12-03 |
Bdale Garbee | layout fully routed, but not yet pretty
|
commit | commitdiff | tree |
| 2009-12-03 |
Bdale Garbee | 4 unrouted nets
|
commit | commitdiff | tree |
| 2009-12-03 |
Bdale Garbee | snapshot to show keithp
|
commit | commitdiff | tree |
| 2009-12-02 |
Bdale Garbee | Merge branch 'backside'
|
commit | commitdiff | tree |
| 2009-12-02 |
Bdale Garbee | lots of work on the layout tonight
|
commit | commitdiff | tree |
| 2009-11-21 |
Bdale Garbee | eliminate C33 since testing implies one 100uF cap on...
|
commit | commitdiff | tree |
| 2009-11-20 |
Bdale Garbee | rework vendor part number tags, switch diodes to footprint...
|
commit | commitdiff | tree |
| 2009-11-19 |
Bdale Garbee | shorten connector name and take spaces out
|
commit | commitdiff | tree |
| 2009-11-19 |
Bdale Garbee | snapshot work in progress, change of pinout on 8 bin...
|
commit | commitdiff | tree |
| 2009-11-17 |
Bdale Garbee | placed another DK order
|
commit | commitdiff | tree |
| 2009-11-16 |
Bdale Garbee | snapshot, layout incomplete
|
commit | commitdiff | tree |
| 2009-11-07 |
Bdale Garbee | change pyro battery to 2-pin 2mm connector just like...
|
commit | commitdiff | tree |
| 2009-11-07 |
Bdale Garbee | add datasheets and other relevant misc files to git...
|
commit | commitdiff | tree |
| 2009-11-04 |
Bdale Garbee | sigh
|
commit | commitdiff | tree |
| 2009-11-03 |
Bdale Garbee | change pyro battery connector to 3-pin picoblade to...
|
commit | commitdiff | tree |
| 2009-11-03 |
Bdale Garbee | cleaning things up, particularly back side silk screen...
|
commit | commitdiff | tree |
| 2009-11-02 |
Bdale Garbee | board routed, many DRC issues resolved, some remain
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | pcb routed, but various drc errors still exist
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | oops, fix duplicate refdes on new cap
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | add 1uF bypass cap adjacent to new ldo output as per...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | change 3.3V LDO to a 100mA CMOS part to support GPS...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | rename telemetrum.bom to partslist to avoid conflict...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | note name conflict between my .bom file and PCB export...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | add datasheets and other relevant misc files to git...
|
commit | commitdiff | tree |
| 2009-11-01 |
Bdale Garbee | snapshot work in progress on v0.2
|
commit | commitdiff | tree |
| 2009-10-30 |
Bdale Garbee | snapshot, on 777 between KIX and SFO
|
commit | commitdiff | tree |
| 2009-10-24 |
Bdale Garbee | change schematic to use Skytraq Venus GPS modules as...
|
commit | commitdiff | tree |
| 2009-10-23 |
Bdale Garbee | snapshot of work in process
|
commit | commitdiff | tree |
| 2009-10-22 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2009-10-12 |
Bdale Garbee | work in process on revising the pcb artwork for v0.2
|
commit | commitdiff | tree |
| 2009-10-11 |
Bdale Garbee | reslice bom content
|
commit | commitdiff | tree |
| 2009-10-11 |
Bdale Garbee | tweaking
|
commit | commitdiff | tree |
| 2009-10-11 |
Bdale Garbee | updating schematic to capture current thinking towards...
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | revert pcb artwork to v0.1 for now
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | restored beeper replacing one LED, numerous small changes
|
commit | commitdiff | tree |
| 2009-10-10 |
Bdale Garbee | pondering TP guts and such in Notebook file
|
commit | commitdiff | tree |
| 2009-09-15 |
Bdale Garbee | DigiKey orders
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | placed another DigiKey parts order
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | PCB changes to account for FET swap
|
commit | commitdiff | tree |
| 2009-08-25 |
Bdale Garbee | move from FDN335N discrete FETs to FDS9926A dual FET...
|
commit | commitdiff | tree |
| 2009-08-08 |
Bdale Garbee | remove accidentally dragged in 5-pin version of J6...
|
commit | commitdiff | tree |
| 2009-08-08 |
Bdale Garbee | Merged in the two changes from 'nextcut' branch necessary...
|
commit | commitdiff | tree |
| 2009-08-08 |
Bdale Garbee | fix for igniter continuity sense, requires adding a...
|
commit | commitdiff | tree |
| 2009-08-08 |
Bdale Garbee | We need to be able to control the chip select input...
|
commit | commitdiff | tree |
| 2009-08-08 |
Bdale Garbee | placed another DigiKey parts order
|
commit | commitdiff | tree |
| 2009-08-06 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2009-06-30 |
Bdale Garbee | document gps default settings with a text note
|
commit | commitdiff | tree |
| 2009-06-30 |
Bdale Garbee | make gps default be 4k8 NMEA just like SF board, since...
|
commit | commitdiff | tree |
| 2009-06-03 |
Bdale Garbee | add a silk screen block near the GPS antenna for recording...
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | clear out planes under the GPS antenna
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | working on layout with GPS ... add 0.25 inches to length...
|
commit | commitdiff | tree |
| 2009-06-02 |
Bdale Garbee | work in progress on schematics and notes for version...
|
commit | commitdiff | tree |
| 2009-06-01 |
Bdale Garbee | add J7 serial connector back in as optional, fix pinout...
|
commit | commitdiff | tree |
| 2009-06-01 |
Bdale Garbee | capture Notebook in git, add SMA option to GPS receiver
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | fix all DRC issues
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | embed all the parts
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | added GPS receiver ... not all part attributes present yet
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | everything on the post-Mayhem to-do list except adding...
|
commit | commitdiff | tree |
| 2009-05-27 |
Bdale Garbee | eliminate beeper and temp sensor in favor of offboard...
|
commit | commitdiff | tree |
| 2009-04-22 |
Bdale Garbee | add connector for SPI channel to talk to companion...
|
commit | commitdiff | tree |
| 2009-04-12 |
Bdale Garbee | change R14,15 to 56k and change all K resistor value...
|
commit | commitdiff | tree |
| 2009-03-30 |
Bdale Garbee | add a text note regarding R14/15, R21/22 values on...
|
commit | commitdiff | tree |
| 2009-03-27 |
Bdale Garbee | fix for igniter continuity sense, requires adding a...
|
commit | commitdiff | tree |
| 2009-03-24 |
Bdale Garbee | replace debug connector with a 5-pin Molex 1.25mm pitch...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | We need to be able to control the chip select input...
|
commit | commitdiff | tree |
| 2009-03-18 |
Bdale Garbee | capture Makefile changes before branching
|
commit | commitdiff | tree |
| next |
projects / hw / telemetrum / search