layer names changed in new version of pcb
[hw/telemetrum] / telemetrum.pcb
2011-11-13 Bdale Garbeeimprove clearances
2011-11-13 Bdale Garbeerotate ADXL78 by 180 degrees so that axis orientation...
2011-11-03 Bdale Garbeeone more tweak
2011-11-03 Bdale Garbeemuch copper tweaking while sitting at the rink
2011-10-30 Bdale Garbeereplace accel with ADXL78 .. more copper cleanup is...
2011-10-26 Bdale Garbeepart values changes for v1.2 boards .. Venus, reset...
2011-10-19 Bdale Garbeechange gnd thing to one larger hole instead of two...
2011-10-17 Bdale Garbeecharge status led re-wired to avoid false charge comple...
2011-10-17 Bdale Garbeeclean up copper in various places, now that translucenc...
2011-10-17 Bdale GarbeeReplace pyro batt footprint with two ground holes for...
2011-10-13 Bdale Garbeeupdate version and copyright year
2011-10-13 Bdale Garbeereverse the 100uF ballast cap so gnd pin is adjacent...
2011-10-13 Bdale Garbeeadd 1uF bypass cap on LDO input
2010-12-09 Bdale Garbeeforward annotate flash part change to the pcb data
2010-12-07 Bdale Garbeeforward annotate addition of name for M25P80 part
2010-12-07 Bdale Garbeeshorten a gnd trace that keithp spotted
2010-12-07 Bdale Garbeeforward annotate metadata changes to the artwork
2010-12-06 Bdale Garbeefound and fixed an errant via in the SMA footprint
2010-12-06 Bdale Garbeemake all vias that connect to planes be non-thermal...
2010-12-06 Bdale Garbeetake power-related vias back to 20 mils, route complete...
2010-12-06 Bdale Garbeechange all vias from 20mil to 15mil drill
2010-12-06 Bdale Garbeefix soldermask clearance around U.FL connector
2010-12-06 Bdale Garbeetent all vias
2010-12-06 Bdale Garbeeclean up a DRC error introduced by accidental movement...
2010-11-22 Bdale Garbeeupdate silkscreen to reflect v1.1, clean up a few other...
2010-11-22 Bdale Garbeereduce size of the gps split ground plane, clean up...
2010-11-22 Bdale Garbeepcb updated with accel_ref divider and minus the GPS...
2010-11-18 Bdale Garbeeupdate to reflect footprint name change
2010-10-01 Bdale Garbeechange from DataFlash to M25P80 for on-board data storage
2010-08-11 Bdale Garbeeredesign reset circuit to completely solve the "cap...
2010-05-14 Bdale Garbeecap value change reflected in pcb
2010-05-05 Bdale Garbeeremove BuildLog since it contains private information
2010-03-10 Bdale Garbeereplace LDO with TC2185, adding C38 0.1uF bypass cap... quote-v1.0
2010-03-07 Bdale Garbeetweak the position of 'main' so it doesn't crowd 'apoge...
2010-03-07 Bdale Garbeemove 'pyro' into the B2 component outline since it...
2010-03-07 Bdale Garbeemove a via and the text to improve 'switch' integrity...
2010-03-07 Bdale Garbeemove 'companion' in silk screen to avoid vias, change...
2010-01-11 Bdale Garbeechange reset cap back from 1uF to 0.001uF, note that...
2010-01-07 Bdale Garbeetwo resistor suffixes propagated to pcb file
2010-01-02 Bdale Garbeeattribute cleanups
2009-12-18 Bdale Garbeefix soldermask clearance on gps patch pin
2009-12-18 Bdale Garbeeupdate pcb to reflect use of v_charge for GPS vbat
2009-12-18 Bdale Garbeemove to 16mbit dataflash part since nobody has 32mbit...
2009-12-18 Bdale Garbeemore copper and mask tweaking
2009-12-18 Bdale Garbeefixing soldermask relief issues, etc, identified by...
2009-12-18 Bdale Garbeeadd soldermask clearance to index holes on micromatch...
2009-12-18 Bdale Garbeeup annular ring design rule to 7 mils, update vias...
2009-12-18 Bdale Garbeeupgraded geda-gaf to 1.6.0, used gattrib to clean up...
2009-12-17 Bdale Garbeemove pin 19 on Venus from RF ground to system ground...
2009-12-12 Bdale Garbeeswap cs0 and cs1 pin assignments on cc1111
2009-12-11 Bdale Garbeefixed u.fl refdes
2009-12-11 Bdale Garbeecleaning up top layer silk
2009-12-10 Bdale Garbeefix solder mask dimension on beeper pins
2009-12-10 Bdale Garbeeupdate pcb to use correct locking footprint for compani...
2009-12-10 Bdale Garbeeworking on attributes to be able to put board out for...
2009-12-09 Bdale Garbeecombine gps and cc1111 reset inputs into one net, elimi...
2009-12-09 Bdale Garbeeshoving connector side silk around to avoid vias
2009-12-08 Bdale Garbeechange to plated holes for MicroMaTch connector index...
2009-12-08 Bdale Garbeevarious improvements in the layout
2009-12-06 Bdale Garbeere-arrange pins on companion board connector at Keith...
2009-12-04 Bdale Garbeeall DRC issues resolved origin/movecpu
2009-12-03 Bdale Garbeefixing DRC issues
2009-12-03 Bdale Garbeeadded silk area for serial number, etc
2009-12-03 Bdale Garbeelayout fully routed, but not yet pretty
2009-12-03 Bdale Garbee4 unrouted nets
2009-12-03 Bdale Garbeesnapshot to show keithp
2009-12-02 Bdale GarbeeMerge branch 'backside'
2009-12-02 Bdale Garbeelots of work on the layout tonight origin/backside
2009-11-21 Bdale Garbeeeliminate C33 since testing implies one 100uF cap on...
2009-11-20 Bdale Garbeerework vendor part number tags, switch diodes to footpr...
2009-11-19 Bdale Garbeeshorten connector name and take spaces out
2009-11-19 Bdale Garbeesnapshot work in progress, change of pinout on 8 bin...
2009-11-16 Bdale Garbeesnapshot, layout incomplete
2009-11-07 Bdale Garbeechange pyro battery to 2-pin 2mm connector just like... origin/nextcut
2009-11-03 Bdale Garbeechange pyro battery connector to 3-pin picoblade to...
2009-11-03 Bdale Garbeecleaning things up, particularly back side silk screen...
2009-11-02 Bdale Garbeeboard routed, many DRC issues resolved, some remain
2009-11-01 Bdale Garbeepcb routed, but various drc errors still exist
2009-11-01 Bdale Garbeesnapshot work in progress on v0.2
2009-10-30 Bdale Garbeesnapshot, on 777 between KIX and SFO
2009-10-23 Bdale Garbeesnapshot of work in process mn5010hs origin/mn5010hs
2009-10-22 Bdale Garbeesnapshot
2009-10-12 Bdale Garbeework in process on revising the pcb artwork for v0.2
2009-10-10 Bdale Garbeerevert pcb artwork to v0.1 for now
2009-08-25 Bdale GarbeePCB changes to account for FET swap
2009-08-06 Bdale Garbeework in progress
2009-06-03 Bdale Garbeeadd a silk screen block near the GPS antenna for record...
2009-06-02 Bdale Garbeeclear out planes under the GPS antenna
2009-06-02 Bdale Garbeeworking on layout with GPS ... add 0.25 inches to lengt...
2008-12-26 Bdale Garbeeopen up clearances on the holes in the cc1111 footprint fab-v0.1
2008-12-26 Bdale Garbeeholes in ground tab under CC1111 changed to solidly...
2008-12-26 Bdale Garbeemajor update of CC1111 footprint to get mask and paste...
2008-12-26 Bdale Garbeepart and via shoves and other solder mask improvements...
2008-12-24 Bdale Garbeeadd gate resistors, and swap FET drain and source to...
2008-12-24 Bdale Garbeefix via mask clearance issues -- clean report from...
2008-12-23 Bdale Garbeeadding more silkscreen labels
2008-12-23 Bdale Garbeeimprove layout around CC1111 and get traces at least...
2008-12-23 Bdale Garbeefreshen U5 footprint to better match measured part...
2008-12-23 Bdale Garbeefix bottom layer ground plane around SMA connector...
2008-12-23 Bdale Garbeeupdated netlist and pin names to match current schematic
next