remove BuildLog since it contains private information

diff --git a/BuildLog b/BuildLog
deleted file mode 100644 (file)
index a8e0953..0000000
--- a/BuildLog
+++ /dev/null
@@ -1,141 +0,0 @@
-Turn-On Log for TeleMetrum boards
-
-2010.04.08
-- First production run received from Advanced Circuits, 54 units of v1.0. 
-
-  To be complete, each board needs:
-
-       - add GPS patch antenna
-       - add customer choice of pyro connector
-       - remove C38                    (wrong value, optional)
-       - replace C36 with 1uF          (better value)
-
-- sn 208
-       persistent crc error problems communicating over UHF link
-
-- sn 209
-       solder bridge across C3, caused USB enumeration failure.  removed the
-       short and it works ok.
-       img_9568.jpg
-
-       GPS sensitivity seems very low .. ok with off-board amplified patch
-
-2010.04.09
-- sn 210
-       missing J9, installed from my parts stock.
-       img_9571.jpg
-
-       kapton tape left over baro sensor port, removed with tweezers.
-       img_9572.jpg
-
-       nominal performance
-
-- sn 211
-       U4 installed 180 degrees rotated, thus 5V supply not working, accel
-       gave weird values.  Removed and replaced with fresh part.
-       img_9573.jpg
-
-       nominal performance
-
-- sn 212
-       nominal performance
-
-2010.04.10
-- sn 213
-       kapton on baro
-
-       GPS sensitivity seems low .. ok with off-board amplified patch
-       after it has locked once, re-locks just fine with onboard patch
-
-- sn 214
-       kapton on baro
-
-       nominal performance
-
-- sn 215
-       R8 appears damaged, seemed to work, but removed and replaced anyway
-
-       persistent invalid crcs
-
-- sn 216
-       may be ok
-
-- sn 217
-       kapton on baro
-
-- sn 218
-       kapton on baro
-
-- sn 219
-       missing J9
-
-- sn 220
-       kapton on baro
-
-- sn 221
-       kapton on baro
-
-- sn 222
-       kapton on baro
-
-- sn 223
-       may be ok
-
-- sn 224
-       kapton on baro
-
-- sn 225
-       may be ok
-
-- sn 226
-       kapton on baro
-
-- sn 227
-       kapton on baro
-
-
-- Summary Thoughts:
-       I really don't understand the missing J9 connectors.  The empty 
-       parts baggie that was in the package of stuff sent to me says 56 
-       were purchased, and we only have 54 boards.  Where'd they go?  And 
-       can someone explain how a big red connector that's so visually 
-       obvious could be missed in QA?
-
-       The one solder bridge and one damaged 0402 resistor found so far 
-       may just be par for the course at this price/service level?
-
-2010.04.26
-- received Taoglas AP.17A.07.0040A amplified patches.  Installed one on 
-  sn 208 and confirmed functionality and performance.  I still see sn 208
-  exhibiting a problem where sometimes it emits 100% CRC errors over the UHF
-  link and other times it's fine.  Keep this one for myself, don't ship it!
-
-- sn 228
-       + remove kapton on baro
-       + install SMA
-       + install Tyco
-       + remove C36
-       + remove C38
-       + install C36 1uF
-
-       1186569 
-       10.06 dBm
-
-       Nathan E Dalrymple 
-       Order #123677903482987
-
-- sn 229
-       + remove kapton on baro
-       + install SMA
-       + install screws
-       + remove C36
-       + remove C38
-       + install C36 1uF
-       + replace accel with 100g part
-
-       1186581
-       10.24 dBm
-
-       Robert J Finch  
-       Order #335810048524542
-

diff --git a/telemetrum.pcb b/telemetrum.pcb
index 16ab14c3a4c554db0a36d5af818e0489a425c517..bf9e4f58592cc39501575984cac0ba3bec13e434 100644 (file)
--- a/telemetrum.pcb
+++ b/telemetrum.pcb
@@ -1441,7 +1441,7 @@ Element["" "0402" "C23" "8.2pF" 242693 56074 6509 -4282 3 100 ""]
 
        )
 
-Element["" "0402" "C36" "0.001uF" 197993 29374 -829 -4920 3 100 ""]
+Element["" "0402" "C36" "1uF" 197993 29374 -829 -4920 3 100 ""]
 (
        Pad[-393 -1574 393 -1574 1968 2000 2568 "1" "1" "square"]
        Pad[-393 1574 393 1574 1968 2000 2568 "2" "2" "square"]
@@ -1798,7 +1798,7 @@ Element["onsolder" "0-338068-8" "J9" "CompanionInterface" 237589 5487 -40678 114
 
        )
 
-Element["" "0402" "C38" "0.1uF" 52474 91293 -8283 2669 0 100 ""]
+Element["" "0402" "C38" "0.01uF" 52474 91293 -8283 2669 0 100 ""]
 (
        Pad[-393 -1574 393 -1574 1968 2000 2568 "1" "1" "square"]
        Pad[-393 1574 393 1574 1968 2000 2568 "2" "2" "square"]