document TM v1.0 turn-on activities so far

diff --git a/BuildLog b/BuildLog
new file mode 100644 (file)
index 0000000..0b3d559
--- /dev/null
+++ b/BuildLog
@@ -0,0 +1,100 @@
+Turn-On Log for TeleMetrum boards
+
+2010.04.08
+- First production run received from Advanced Circuits, 54 units of v1.0. 
+
+  To be complete, each board needs:
+
+       - add GPS patch antenna
+       - add customer choice of pyro connector
+       - remove C38                    (wrong value, optional)
+       - replace C36 with 1uF          (better value)
+
+- sn 208
+       persistent crc error problems communicating over UHF link
+
+- sn 209
+       solder bridge across C3, caused USB enumeration failure.  removed the
+       short and it works ok.
+       img_9568.jpg
+
+       GPS sensitivity seems very low .. ok with off-board amplified patch
+
+2010.04.09
+- sn 210
+       missing J9, installed from my parts stock.
+       img_9571.jpg
+
+       kapton tape left over baro sensor port, removed with tweezers.
+       img_9572.jpg
+
+       nominal performance
+
+- sn 211
+       U4 installed 180 degrees rotated, thus 5V supply not working, accel
+       gave weird values.  Removed and replaced with fresh part.
+       img_9573.jpg
+
+       nominal performance
+
+- sn 212
+       nominal performance
+
+2010.04.10
+- sn 213
+       kapton on baro
+
+- sn 214
+       kapton on baro
+
+- sn 215
+       R8 appears damaged
+
+- sn 216
+       may be ok
+
+- sn 217
+       kapton on baro
+
+- sn 218
+       kapton on baro
+
+- sn 219
+       missing J9
+
+- sn 220
+       kapton on baro
+
+- sn 221
+       kapton on baro
+
+- sn 222
+       kapton on baro
+
+- sn 223
+       may be ok
+
+- sn 224
+       kapton on baro
+
+- sn 225
+       may be ok
+
+- sn 226
+       kapton on baro
+
+- sn 227
+       kapton on baro
+
+
+- Summary Thoughts:
+       I really don't understand the missing J9 connectors.  The empty 
+       parts baggie that was in the package of stuff sent to me says 56 
+       were purchased, and we only have 54 boards.  Where'd they go?  And 
+       can someone explain how a big red connector that's so visually 
+       obvious could be missed in QA?
+
+       The one solder bridge and one damaged 0402 resistor found so far 
+       may just be par for the course at this price/service level?
+
+