projects / hw / telegps / search
? search:
summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next
Shuffle text around a bit
2013-03-21 Keith PackardShuffle text around a bit
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardAdd status LED to PCB. Shrink VIA clearance to 6.00mil
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardAdd status LED
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardMove packages to altusmetrum shared repo
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardSwitch to altusmetrum component directory
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardMove components away from cc115 corners
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-03-21 Keith PackardEliminate top ground flood under GPS chip
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-01-27 Keith PackardClean up ground flood on top
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-01-15 Keith PackardFix clean target to remove more stuff
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-01-15 Keith PackardUse shared altusmetrum scheme files
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2013-01-08 Keith PackardAdd DK numbers for SMA and a couple of caps
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardUn-short gnd and gps_gnd
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardNice big serial number patch
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardMove top ground plane away from USB cut-out
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardIck. Little top ground plane glitch
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardMore top ground plane changes
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardShove swdio trace right
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardRe-flood the top
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardMove U7 label to someplace visible
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-31 Keith PackardMove power switch between SD and debug connectors
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-30 Keith PackardFlip debug connector around
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-30 Keith PackardAdd serial port for optional telemetry input
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardFix filenames to make oshpark happy
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardMove U7 label into a reasonable place
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardExport gerber files with 'eagle' names. Add copyright...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardAdd a couple of missing packages to git
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardUpdate schematic and PCB to include STM-48 QFP pad
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-28 Keith PackardFix STM footprint to include TI-style pad with vias
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-27 Keith PackardFix QFN-16 footprint to meet DRC rules (13mil drill...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-27 Keith PackardMake freedfm happy about debug alignment hole annular...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-23 Keith PackardMove another capacitor further from the battery connector
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-23 Keith PackardSwitch to the new SMA footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-22 Keith PackardFinish re-routing after moving TH components to front
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-22 Keith PackardMove TH components to front side
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardMake the ground flood on the backside complete
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardFix clearance around GPS mounting holes
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardCreate a large ground plane behind the RF section
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardMark do-not-load parts as loadstatus=noload
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardFind DK number for 10 ohm resistor
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardAdd more part values
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardCorrect STM32L part number
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardUpdate DK part numbers
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardAdd a handful of bypass caps
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardFix board size to 1 inch high
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardShuffle ink around
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardRoute the battery charger.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardFinish routing RF section
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-21 Keith PackardAdd a power switch connector (two pin holes). Route...
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardMove vias and traces from underneath GPS
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardRoute most of the CPU
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardSwitch GPS to usart2 on pins 11 and 12
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardRoute PA controls towards PA
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardRoute cc115L
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardStitch GPS ground plane. Rotate microSD. Start PA route.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardUpdate ground plane and VCC. Place microUSB
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardUpdate CC115L component values
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardAdd value and footprints for PA section
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-20 Keith PackardAdd RF components. Hook up microSD card.
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-19 Keith Packardgeda doesn't like 'passive' pins. Use 'pas' instead
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-19 Keith PackardAdd two more signal layers and planned outline
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-19 Keith PackardInitial schematic and pcb floor planning
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
2012-12-19 Keith PackardImport packages and symbols to be used for TeleGPS
Signed-off-by: Keith Packard <keithp@keithp.com>
 commit | commitdiff | tree
GPS telemetry board