hw/telefirefour
2012-09-11 Keith PackardGenerate .zip file more cleanly
2012-09-11 Keith PackardAdd another alarm circuit.
2012-09-10 Keith PackardAdd a heat sink under the alarm FET
2012-09-10 Keith PackardFix shift register and pull-ups. Add FET for external...
2012-08-23 Keith PackardMake CSV parts list that can be used to generate assemb... v0.1
2012-08-23 Keith PackardFix rotary switch vendor part number
2012-08-06 Keith PackardMove resistor dividers for middle relay circuits west
2012-08-06 Keith PackardFix digikey BOM generation
2012-08-06 Keith PackardMove hole text. Switch to small vias
2012-08-05 Keith PackardBuild DK parts list automatically
2012-08-05 Keith PackardUse 3.3k part for 3.3k resistors
2012-08-04 Keith PackardAdd scripts for formatting csv file
2012-08-04 Keith PackardMerge 100k and 27k resistors to one part number
2012-08-04 Keith PackardRemove spurious attributes from view
2012-08-04 Keith PackardFix pintype in relay and USB connector
2012-08-04 Keith PackardSMA connector is loaded
2012-08-04 Keith PackardAdd .gitignore
2012-08-04 Keith PackardFix the layer names in the 'zip' target
2012-08-04 Keith PackardAdd missing left outline edge
2012-08-04 Keith PackardAdd vendor/loadstatus/vendor_part_number/value to all...
2012-08-04 Keith PackardFix DIP switch footprints. Add vendor for SOT-23 diodes
2012-08-03 Keith PackardAdd datasheet for resistor array
2012-08-03 Keith PackardShrink board to 4x4 square
2012-08-03 Keith PackardA6R rotary switches require custom 36mil holes
2012-08-03 Keith PackardAdd pull-ups on the rotary switches
2012-08-02 Keith PackardAdd some missing symbols and packages
2012-07-22 Keith PackardAdd 74hc597 datasheet
2012-07-22 Keith PackardFix connection between relay and spade lug
2012-07-22 Keith PackardUse USB micro B. Adjust outline to match
2012-07-22 Keith PackardUn-thermal vias that aren't on pins
2012-07-07 Keith PackardRename to 'TeleFire'
2012-06-15 Keith PackardFix quick-disconnect package
2012-06-15 Keith PackardUpdate relay footprint to match high-current version
2012-06-08 Keith PackardShrink to 4" x 4.5"
2012-06-06 Keith PackardShrink board to 4.5" square
2012-06-06 Keith PackardAdd NC symbols
2012-06-06 Keith PackardFix board size, place screws
2012-06-05 Keith PackardClean up DRC errors
2012-06-05 Keith PackardAnd everything appears happy again. dunno.
2012-06-05 Keith PackardSomething went badly wrong with pcb and everything...
2012-05-04 Keith PackardNearly finished with pcb now
2012-05-04 Keith PackardSwitch to 4-pin Micro MaTch for debug
2012-05-04 Keith PackardCopy TeleMini PCB file over, stripping out the unnecess...
2012-05-04 Bdale Garbeeonly use gafrc, force use of local symbols only, flesh...
2012-05-04 Bdale Garbeeput a better gafrc in place
2012-05-03 Keith PackardAdd enough packages to get the PCB to work
2012-05-03 Keith PackardAdd beeper. Make sense1 detect shorted relay.
2012-05-03 Keith PackardInitial telepad circuit