Switch pyro series resistors to 1k

This limits the current through the comparator to 3.3mA when it fires
to make sure the gate voltage on the FET is low enough. The SI LM293
comparators are rated at 4mA current, unlike the TI parts which are
rated at 6mA, hence the move from 549 to 1k.

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/telefireeight.sch b/telefireeight.sch
index 1d1cc60adaaf337df14edb0d0d384044821d9023..10327b9a6098bf73e63b1a4b357211b8a8947891 100644 (file)
--- a/telefireeight.sch
+++ b/telefireeight.sch
@@ -1,4 +1,4 @@
-v 20180820 2
+v 20130925 2
 C 40000 40000 0 0 0 title-E.sym
 C 80100 48200 1 0 0 gnd.sym
 N 80300 48600 80200 48600 4
@@ -123,7 +123,7 @@ device=RESISTOR
 T 43500 45200 5 10 1 1 180 0 1
 refdes=R18
 T 43900 45200 5 10 1 1 180 0 1
-value=549
+value=1k
 T 43100 44800 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -134,7 +134,7 @@ device=RESISTOR
 T 43500 48400 5 10 1 1 180 0 1
 refdes=R6
 T 43900 48400 5 10 1 1 180 0 1
-value=549
+value=1k
 T 43100 48000 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -250,7 +250,7 @@ device=RESISTOR
 T 75500 63100 5 10 1 1 180 0 1
 refdes=R125
 T 75900 63100 5 10 1 1 180 0 1
-value=549
+value=1k
 T 75100 62700 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -372,7 +372,7 @@ device=RESISTOR
 T 65700 59700 5 10 1 1 180 0 1
 refdes=R121
 T 66100 59700 5 10 1 1 180 0 1
-value=549
+value=1k
 T 65300 59300 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -1556,7 +1556,7 @@ device=RESISTOR
 T 65700 63100 5 10 1 1 180 0 1
 refdes=R111
 T 66100 63100 5 10 1 1 180 0 1
-value=549
+value=1k
 T 65300 62700 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -1567,7 +1567,7 @@ device=RESISTOR
 T 75500 59700 5 10 1 1 180 0 1
 refdes=R131
 T 75900 59700 5 10 1 1 180 0 1
-value=549
+value=1k
 T 75100 59300 5 10 0 1 90 0 1
 footprint=0402
 }
@@ -2463,7 +2463,7 @@ footprint=0402
 T 75500 70300 5 10 1 1 180 0 1
 refdes=R25
 T 75900 70300 5 10 1 1 180 0 1
-value=549
+value=1k
 }
 N 76000 70000 76600 70000 4
 N 66200 70000 66800 70000 4
@@ -2585,7 +2585,7 @@ footprint=0402
 T 65700 66900 5 10 1 1 180 0 1
 refdes=R21
 T 66100 66900 5 10 1 1 180 0 1
-value=549
+value=1k
 }
 N 76000 66600 76600 66600 4
 N 66200 66600 66800 66600 4
@@ -2768,7 +2768,7 @@ footprint=0402
 T 65700 70300 5 10 1 1 180 0 1
 refdes=R11
 T 66100 70300 5 10 1 1 180 0 1
-value=549
+value=1k
 }
 C 75100 66500 1 0 0 resistor.sym
 {
@@ -2779,7 +2779,7 @@ footprint=0402
 T 75500 66900 5 10 1 1 180 0 1
 refdes=R31
 T 75900 66900 5 10 1 1 180 0 1
-value=549
+value=1k
 }
 C 66800 70600 1 270 0 n-fet.sym
 {