Switch to OSRAM Topled LO T67K-L1M2-24-Z
[hw/micropeak] / micropeak.sch
2012-10-31 Keith PackardSwitch to OSRAM Topled LO T67K-L1M2-24-Z origin/master
2012-10-31 Keith PackardDischarge caps on power off with 100k resistor
2012-10-01 Keith PackardAdd a power switch.
2012-09-30 Keith PackardRemove EEPROM. Switch LEDs.
2012-09-30 Keith PackardFlip MISO/MOSI around. origin/logging
2012-09-28 Keith PackardCorrect at24c512 I2C pins
2012-09-28 Keith PackardAdd resistor from MS5611 MISO pin
2012-09-21 Keith PackardAdd I2C pull-ups
2012-09-19 Keith PackardAdd 64kB flash for data logging
2012-09-17 Keith PackardTie mounting holes to VCC
2012-09-11 Keith PackardMove component labels well off board. v0.2
2012-09-04 Keith PackardMove programming connector nearly off board. Add logo
2012-08-23 Keith PackardUse 6-pin header for AVR programming
2012-08-21 Keith PackardRename nRESET net as \_reset\_ so it looks nicer in...
2012-08-17 Keith PackardBump revision number to 0.2
2012-08-17 Keith PackardSwitch to 5-pin debug connector
2012-08-15 Keith PackardFlood top with ground. Fix clearance around pico-ezmate.
2012-08-15 Keith PackardShuffle things around to make room for a fourth hole
2012-08-13 Keith PackardSwitch to blue LED. Use available TDK 4.7uF capacitor v0.1
2012-08-13 Keith PackardAdd some text to the silk
2012-08-13 Keith PackardAdd another hole
2012-08-13 Keith PackardUse the ATMEL QFN appnote AT88RF1354 to build a more...
2012-08-13 Keith PackardSwitch from picoblade to pico ezmate
2012-08-12 Keith PackardAdd holes. Eliminate vias under baro sensor.
2012-08-12 Keith PackardImport new MicroPeak project