Bdale Garbee [Mon, 31 Aug 2009 22:47:44 +0000 (16:47 -0600)]
pixmap file should not be executable
Bdale Garbee [Mon, 31 Aug 2009 22:42:55 +0000 (16:42 -0600)]
update changelogs for Debian build
Bdale Garbee [Mon, 31 Aug 2009 22:42:37 +0000 (16:42 -0600)]
deliver an icon for the Debian menu system
Bdale Garbee [Mon, 31 Aug 2009 22:26:00 +0000 (16:26 -0600)]
update changelogs for Debian build
Bdale Garbee [Mon, 31 Aug 2009 22:25:32 +0000 (16:25 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Fri, 21 Aug 2009 17:47:46 +0000 (10:47 -0700)]
Turn off GPS tracking data when not present in data stream
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 Aug 2009 08:21:23 +0000 (02:21 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 19 Aug 2009 08:21:06 +0000 (02:21 -0600)]
fix location for delivery of sources.list fragment
Bdale Garbee [Wed, 19 Aug 2009 08:11:11 +0000 (02:11 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 19 Aug 2009 08:11:00 +0000 (02:11 -0600)]
oops, aoview is now ao-view!
Bdale Garbee [Wed, 19 Aug 2009 08:07:16 +0000 (02:07 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 19 Aug 2009 08:06:49 +0000 (02:06 -0600)]
enable support for Debian menus
Bdale Garbee [Wed, 19 Aug 2009 06:52:57 +0000 (00:52 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 19 Aug 2009 06:49:24 +0000 (00:49 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Wed, 19 Aug 2009 06:38:16 +0000 (23:38 -0700)]
Update ao-view to add GPS satellite tracking data
This adds another column to the display to hold per-satellite GPS
tracking data and a count of the visible and locked sats.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 Aug 2009 05:35:15 +0000 (22:35 -0700)]
Handle GPS satellite tracking data
SiRF message #4 includes signal strength and GPS engine state for each
of the satellites being tracked. This data is now parsed and sent to
eeprom and the radio.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 Aug 2009 03:57:01 +0000 (21:57 -0600)]
update changelogs for Debian build
Bdale Garbee [Wed, 19 Aug 2009 03:49:39 +0000 (21:49 -0600)]
add support for building Debian package
Bdale Garbee [Wed, 19 Aug 2009 00:56:09 +0000 (18:56 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Wed, 19 Aug 2009 00:55:22 +0000 (17:55 -0700)]
Add ao-ejection.1 man page
Document the input requirements and output format
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 Aug 2009 00:36:03 +0000 (18:36 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Wed, 19 Aug 2009 00:30:43 +0000 (17:30 -0700)]
Create ChangeLog from git log
Keith Packard [Wed, 19 Aug 2009 00:29:29 +0000 (17:29 -0700)]
Fix ao-bitbang examples to not have . in the first column
Bdale Garbee [Wed, 19 Aug 2009 00:09:38 +0000 (18:09 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Conflicts:
ao-tools/ao-bitbang/Makefile.am
ao-tools/ao-eeprom/Makefile.am
ao-tools/ao-load/Makefile.am
ao-tools/ao-load/ao-load.c
ao-tools/ao-rawload/Makefile.am
Keith Packard [Tue, 18 Aug 2009 22:21:57 +0000 (15:21 -0700)]
Add manual pages for remaining commands.
Manuals written for ao-bitbang, ao-eeprom, ao-load, ao-rawload and
ao-view.
Manual for ao-dbg updated to reflect program name change.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Aug 2009 19:19:31 +0000 (12:19 -0700)]
Use --tty/-T on command line to specify target device
Also, use the ALTOS_TTY environment variable in all tools. Note that
the magic value of "BITBANG" switches the library to connecting
through a CP2103 instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Aug 2009 19:40:24 +0000 (12:40 -0700)]
Rename tools to ao-<foo>
Use a consistent prefix to make it easier to remember which programs
belong to this package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Aug 2009 20:36:54 +0000 (13:36 -0700)]
re-add debugger sources
Keith Packard [Tue, 18 Aug 2009 19:19:31 +0000 (12:19 -0700)]
Start working on using getopt for the tty name
Keith Packard [Tue, 18 Aug 2009 19:40:24 +0000 (12:40 -0700)]
Rename tools to ao-<foo>
Use a consistent prefix to make it easier to remember which programs
belong to this package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Aug 2009 18:34:28 +0000 (11:34 -0700)]
Remove unused cctools code paths for old libusb and cp2103 ioctls.
Communication with the CP2103 board has gone through three revisions,
first using ioctls supported by the CP2103 kernel driver, then using
the old synchronous usb library and now using the newer libusb
asynchronous interface. There's no reason to keep shipping the old
stale code now that the new stuff works reliably.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Aug 2009 03:47:31 +0000 (20:47 -0700)]
test for sdcc, nickle and readline
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 10 Aug 2009 03:43:10 +0000 (20:43 -0700)]
Sync USB data after each memory write command
This makes sure we flush the USB link often enough for the other end to keep
up.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Aug 2009 23:08:07 +0000 (16:08 -0700)]
Handle partial ALSA PCM writes
The ALSA spec says that snd_pcm_writei will not return a partial write, but
at least on the OLPC, that's not true. Deal with this.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Aug 2009 22:55:19 +0000 (15:55 -0700)]
Check more alsa return statuses
Keith Packard [Sat, 18 Jul 2009 08:47:34 +0000 (01:47 -0700)]
Don't report distance to rocket without valid GPS
When there's no valid GPS data, don't try to report the distance and bearing
to the rocket after landing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 08:05:33 +0000 (01:05 -0700)]
Add B command to set serial baud rate
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 08:05:13 +0000 (01:05 -0700)]
Get rid of spaces after minus sign in climb value
Keith Packard [Sat, 18 Jul 2009 08:04:39 +0000 (01:04 -0700)]
Switch to 57600 baud for GPS data
Keith Packard [Sat, 18 Jul 2009 08:04:17 +0000 (01:04 -0700)]
Drain serial port before changing speed
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 07:44:42 +0000 (00:44 -0700)]
Display last known GPS coord while unlocked
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 07:44:01 +0000 (00:44 -0700)]
use g_source_destroy instead of free on serial object
Keith Packard [Sat, 18 Jul 2009 07:43:22 +0000 (00:43 -0700)]
Trim aoview_serial_set_callback args down to just port and callback
Keith Packard [Sat, 18 Jul 2009 05:11:03 +0000 (22:11 -0700)]
Reset GPS at boot time
Keith Packard [Sat, 18 Jul 2009 05:10:43 +0000 (22:10 -0700)]
Fix up serial debug output
Keith Packard [Sat, 18 Jul 2009 04:34:13 +0000 (21:34 -0700)]
Allow the GPS port to run at 4800 baud if desired
Keith Packard [Sat, 18 Jul 2009 04:33:53 +0000 (21:33 -0700)]
Initialize the GPS serial protocol state
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 04:33:18 +0000 (21:33 -0700)]
Use uint8_t for comparisons to avoid int conversions
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 04:30:53 +0000 (21:30 -0700)]
Add AO_GPS_RUNNING state.
This tracks whether the GPS receiver has ever sent a valid report to the
flight computer, allowing the user to tell whether the GPS receiver is
working at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 04:25:35 +0000 (21:25 -0700)]
Add M command to monitor serial bytes
Keith Packard [Sat, 18 Jul 2009 04:24:45 +0000 (21:24 -0700)]
Support the not-connected GPS state
Keith Packard [Sat, 18 Jul 2009 02:23:10 +0000 (19:23 -0700)]
Use 57600 baud for GPS. Clean up gps init.
Assume GPS is either in 4800 NMEA or 57600 SiRF mode, send just the sequence
to get from 4800 NMEA to 5760 SiRF.
Also, eliminate threads from the gps test program.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 00:09:20 +0000 (17:09 -0700)]
Try harder to get the GPS receiver serial link sync'd up.
We cannot assume that the GPS receiver is in any particular state when it
boots, so we try to send the serial configuration at several rates and hope
that it eventually sees something that it likes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 18 Jul 2009 00:06:18 +0000 (17:06 -0700)]
Rolling average for pad location. Say 'GPS ready'.
Use a rolling average for the pad location, instead of just averaging all
positions. This filters out old (presumably less accurate) values eventually.
When enough GPS samples have been acquired, say 'GPS ready'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jul 2009 23:22:51 +0000 (16:22 -0700)]
Split GPS data into a separate column
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jul 2009 23:03:35 +0000 (16:03 -0700)]
Fix up SiRF parsing and test code so that it actually works
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jul 2009 20:58:14 +0000 (13:58 -0700)]
Add host-side gps protocol testing program
Keith Packard [Sat, 11 Jul 2009 07:56:13 +0000 (00:56 -0700)]
Hook aoview directly to alsa
This skips the flite internal audio stuff which opened and closed the audio
device for each phrase. This caused the first part of some phrases to be
missed when using an external audio device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jul 2009 03:55:10 +0000 (20:55 -0700)]
Show speed. Format numbers. Timeout and report final status.
The speed value is now shown in the top label bar. Ascent shows
accelerometer-derived data, otherwise it's baro derived.
All of the numbers displayed are now given sensible printf formats so they
don't contain way too many digits.
Instead of doing periodic reporting based on flight tick count, data is
reported every 10 seconds based on wall time. After landing, or when no data
have been received for a while, final flight information is spoken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 5 Jul 2009 15:35:28 +0000 (08:35 -0700)]
Dont smash aoview_monitor_parse input buffer
Keith Packard [Tue, 30 Jun 2009 22:25:52 +0000 (15:25 -0700)]
Integrate flite into aoview directly. Fix great circle computation.
Use a separate thread for flite rather than a separate program.
Save voice state to gconf.
Add filters for replay file selection
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 30 Jun 2009 22:24:53 +0000 (15:24 -0700)]
Make window taller
Keith Packard [Tue, 30 Jun 2009 22:24:31 +0000 (15:24 -0700)]
Use 16kHz voice
Keith Packard [Tue, 30 Jun 2009 18:58:30 +0000 (11:58 -0700)]
Add telem replay and larger labels
Replays telemetry files in real time
Shows height/state/rssi in big values at the top.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 30 Jun 2009 06:06:47 +0000 (23:06 -0700)]
Update aoview/.gitignore
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 30 Jun 2009 06:05:27 +0000 (23:05 -0700)]
Use flite to announce flight state
This uses the flite voice synthesis library from festival to announce
altitude and speed information during the rocket flight.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 30 Jun 2009 06:03:58 +0000 (23:03 -0700)]
Add GPS speed and error data to telemetry and aoview
Having switched to the SiRF binary GPS format, the velocity and error data
can now be displayed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 29 Jun 2009 20:54:00 +0000 (13:54 -0700)]
Convert GPS to SiRF binary protocol.
This switches the GPS unit from NMEA to SiRF protocol at startup and then
parses the binary data. The binary data uses a different encoding of lat/lon
than the NMEA strings, and so the telemetry and eeprom data formats change
with this switch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 18 Jun 2009 06:22:25 +0000 (23:22 -0700)]
Add ejection computation utility
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 17 Jun 2009 20:55:23 +0000 (13:55 -0700)]
Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4
None of our boards have a 32kHz xtal oscillator, instead we use those pins
(on Telemetrum) for the deployment firing circuits. The old clock
initialization code was switching from the 32kHz RC oscillator to the 32kHz
crystal and overriding our use of those pins.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 15 Jun 2009 00:25:34 +0000 (17:25 -0700)]
Some kernels reference USB ttys as tty/tty* instead of tty:tty*
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 14 Jun 2009 23:45:19 +0000 (16:45 -0700)]
Rename state apogee -> coast
Keith Packard [Sun, 14 Jun 2009 23:39:28 +0000 (16:39 -0700)]
rename states. launchpad -> pad, coast -> fast
Keith Packard [Sun, 14 Jun 2009 23:36:29 +0000 (16:36 -0700)]
Disable monitor mode when communicating via usb
Keith Packard [Thu, 4 Jun 2009 21:38:45 +0000 (14:38 -0700)]
Format GPS seconds as %02d.%04d to avoid spaces in the value
The aoview GPS parsing code doesn't deal well with spaces in the middle of
the value, so pad the seconds field with a zero as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 4 Jun 2009 19:11:48 +0000 (13:11 -0600)]
newer INSTALL file pulled in by autogen.sh
Bdale Garbee [Thu, 4 Jun 2009 19:09:29 +0000 (13:09 -0600)]
add a distclean target to src/Makefile
Bdale Garbee [Thu, 4 Jun 2009 19:07:10 +0000 (13:07 -0600)]
add lib to the front of the subdir list
Keith Packard [Thu, 4 Jun 2009 18:20:10 +0000 (11:20 -0700)]
Move build and debug tools to 'cctools' directory.
These tools were merged in from the ccdbg package.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Jun 2009 18:13:15 +0000 (11:13 -0700)]
Merge ccdbg and altos sources into one giant repository
Keeping these separate isn't making things any easier.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Jun 2009 17:41:34 +0000 (10:41 -0700)]
Use autotools, move altos to src subdir
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 4 Jun 2009 17:25:30 +0000 (10:25 -0700)]
Make menu seperator insensitive
Keith Packard [Thu, 4 Jun 2009 00:07:34 +0000 (17:07 -0700)]
aoview: Add eeprom data fetching
Fetches the last flight data from a TM device connected via USB and writes
it to the flight log directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 3 Jun 2009 17:57:46 +0000 (10:57 -0700)]
Stop log dumping at flight end. Print 'end' at end of log.
No reason to continue dumping data past the end of the flight now that the
logging stuff has been demonstrated to work reliably. Also, to make
automated log dumping easier, this prints out 'end' after the log data so
that aoview knows when to stop reading.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 31 May 2009 16:22:01 +0000 (09:22 -0700)]
Start adding bi-directional packet link
Keith Packard [Fri, 29 May 2009 06:17:33 +0000 (23:17 -0700)]
Eliminate RDF tone generation.
Now that we have a viable telemetry-signal based RDF device via TeleDongle,
there's no reason to continue to waste power and bandwidth with a NFM tone.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 May 2009 06:17:25 +0000 (23:17 -0700)]
Change .gitignore to match new aoload procedure
Keith Packard [Thu, 28 May 2009 05:01:37 +0000 (22:01 -0700)]
Leave serial number writing to aoload
Instead of building per-serial hex files, leave that
process to the new aoload program
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 28 May 2009 04:53:15 +0000 (21:53 -0700)]
Add aoload to load serial-numbered altos binaries.
aoload is a custom version of ccload which edits the data before sending it
to the target machine, writing the target serial number into the data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 24 May 2009 04:20:12 +0000 (21:20 -0700)]
Fix aoview telemetry GPS parsing code to use correct columns
This code was trying to pull the GPS data from the wrong columns, causing
aoview to fail to display GPS information.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 24 May 2009 04:18:57 +0000 (21:18 -0700)]
Parse both telemetry or log data ao_flight_test
Change the way data is fed from files to the flight test rig to handle
either kind of input file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 24 May 2009 04:16:22 +0000 (21:16 -0700)]
Avoid 16-bit overflow in velocity computation.
Adding two 16 bit integers together can wrap around to negative numbers,
this resulted in velocity values which never decreased, making the switch
from coast to apogee state not occur.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 20 May 2009 16:44:55 +0000 (09:44 -0700)]
Make file handling more general so it can be reused.
The log file handling stuff will be useful for saving eeprom data, so pull
it out of the real-time log handling code and make a general interface.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2009 06:54:44 +0000 (23:54 -0700)]
Ignore aoview_glade.h
Keith Packard [Mon, 18 May 2009 06:36:21 +0000 (23:36 -0700)]
Transmit computed ground pressure and acceleration values
These are the last two values relevant to figuring out the state of the
flight computer, and as they are computed by averaging 10 seconds of 100Hz
sample data, they're a lot more accurate than anything the receiver could do
on its own.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2009 06:18:09 +0000 (23:18 -0700)]
Provide install target
Keith Packard [Mon, 18 May 2009 06:13:20 +0000 (23:13 -0700)]
Embed glade file in executable
This eliminates install issues nicely.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2009 06:05:23 +0000 (23:05 -0700)]
Add About dialog to aoview.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2009 05:44:19 +0000 (22:44 -0700)]
USB device names can contain '.' too
Depending on the hierarchy of devices, names can contain '.', so allow those
too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 18 May 2009 05:43:34 +0000 (22:43 -0700)]
scandir returns -1 on error
In which case, the namelist is invalid, so don't look at it, and don't free
it.
Signed-off-by: Keith Packard <keithp@keithp.com>