we really don't want dot-config files in the source tree!

diff --git a/.eggprotocolrc b/.eggprotocolrc
deleted file mode 100644 (file)
index a048ddb..0000000
--- a/.eggprotocolrc
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-#  Current protocol for egg
-#
-#   PROTOCOL <samp_rec> <sec_rec> <rec_pkt> <trialsz>
-PROTOCOL 10 10 30 200

diff --git a/.eggrc b/.eggrc
deleted file mode 100644 (file)
index 78df6e7..0000000
--- a/.eggrc
+++ /dev/null
@@ -1,97 +0,0 @@
-# Configuration file for egg collection software
-# This specifies the egg configuration information, the contact
-# information for its basket(s), and initial data acquisition parameters.
-
-# Each line consists of a case-sensitive keyword and a series of
-# options.  Defined keywords are: 
-#
-#   EGG <name> <id> <ip addr> <primbasket> <conntype> <connival> <url>
-#
-# The primary basket <primbasket> is the name of the basket (defined
-# below) that should be contacted retrieve data from this Egg.
-# The connection type <conntype> is "PERM" (permanent) or "DND"
-# (dial-and-drop).  So far the code does not support the DND option.
-# The connection interval <connival> determines the time (in minutes)
-# between transmission attempts.  If specified, and not equal to
-# ".", <url> gives a URL (for example http://www.somesite.net/page.html)
-# which will be linked to the egg <name> in status reports.  Note that
-# this specification has meaning only in the .basketrc file.  For
-# compatibility, it is permitted in an .eggrc file, but is ignored.
-#
-#   BASKET <name> <ip addr>
-#
-# This entry tells us about the existence of a set of baskets.  The
-# basket named as primary is the one which will be contacted
-# initially. 
-#
-#   PROTOCOL <samprec> <secrec> <recpkt> <trialsz>
-#
-# Specify the default data collection protocol.  The arguments are 
-# <samprec> samples per record (1-10, though this should always be 5-10),
-# <secrec> seconds per records (1-3000),
-# <recpkt> records per packet (1-60), and 
-# <trialsz> bits per sample (32-255).
-#
-#   REG <type> <port> <baud>
-#
-# Specify hardware device.  Supported types include "PEAR" only at
-# this time.  Port is serial port number (e.g. 1 for /dev/ttyS1);
-# <baud> is baud rate.
-#
-#   NETUP <script> <args> ...
-#   NETDOWN <script> <args> ...
-#
-# Provide script files to be run to bring up and tear down the network
-# connection on demand.  These will only be used if connection type is
-# DND.
-
-#EGG halley 1 10.0.0.111 halley PERM 1
-#BASKET halley 10.0.0.111
-#EGG halley 1 10.0.0.111 mercury DND 3
-#BASKET mercury 10.0.0.125
-
-#EGG noosphere 28 128.112.35.133 noosphere PERM 1
-#BASKET noosphere 128.112.35.133
-
-#   diesse -> diesse
-#EGG diesse 37 193.8.230.134 diesse PERM 1
-#BASKET diesse 193.8.230.134
-
-#   noosphere -> diesse
-#EGG noosphere 28 128.112.35.133 diesse PERM 1
-#BASKET diesse 193.8.230.134
-
-#   throop -> diesse
-#EGG throop 1003 193.8.230.132 diesse PERM 1 http://www.fourmilab.ch/
-#BASKET diesse 193.8.230.134
-
-#   jura -> jura
-#EGG jura 1004 193.8.230.130 jura PERM 1 http://www.fourmilab.ch/
-#BASKET jura 193.8.230.130
-
-#   diesse -> noosphere
-#EGG diesse.fourmilab.ch 37 193.8.230.134 noosphere PERM 1
-#BASKET noosphere 128.112.35.133
-
-#EGG diesse 37 193.8.230.134 jura PERM 1
-#BASKET jura 193.8.230.130
-
-#BASKET tonga 209.157.90.137
-#BASKET tonga1 209.157.90.138
-#PROTOCOL 10 10 6 200
-#REG PEAR 2 9600
-#REG PSEUDO 1 9600
-#REG ORION 1 9600
-#NETUP pppscript up
-#NETDOWN pppscript down
-
-#egg.host.name ID# IP_address noosphere PERM 1 
-#BASKET noosphere 128.112.35.133 
-#PROTOCOL 10 10 30 200
-#REG ORION 0 9600
-#REG PEAR 0 9600
-
-EGG egg.almadaria.es 1066 195.57.79.136 noosphere PERM 1 http://egg.almadaria.es
-BASKET noosphere 128.112.35.133
-PROTOCOL 10 10 30 200
-REG ORION 0 9600