]>
git.gag.com Git - hw/telefirefour/log
summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Keith Packard [Mon, 6 Aug 2012 01:02:42 +0000 (18:02 -0700)]
Move resistor dividers for middle relay circuits west
Avoids crowding the relay connections which generated a DFM error
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 6 Aug 2012 00:31:57 +0000 (17:31 -0700)]
Fix digikey BOM generation
Keith Packard [Mon, 6 Aug 2012 00:30:29 +0000 (17:30 -0700)]
Move hole text. Switch to small vias
Keith Packard [Sun, 5 Aug 2012 07:44:55 +0000 (00:44 -0700)]
Build DK parts list automatically
Keith Packard [Sun, 5 Aug 2012 07:44:14 +0000 (00:44 -0700)]
Use 3.3k part for 3.3k resistors
Keith Packard [Sat, 4 Aug 2012 22:33:16 +0000 (15:33 -0700)]
Add scripts for formatting csv file
Keith Packard [Sat, 4 Aug 2012 22:32:59 +0000 (15:32 -0700)]
Merge 100k and 27k resistors to one part number
Keith Packard [Sat, 4 Aug 2012 21:59:31 +0000 (14:59 -0700)]
Remove spurious attributes from view
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 20:16:51 +0000 (13:16 -0700)]
Fix pintype in relay and USB connector
Keith Packard [Sat, 4 Aug 2012 20:16:35 +0000 (13:16 -0700)]
SMA connector is loaded
Keith Packard [Sat, 4 Aug 2012 20:16:10 +0000 (13:16 -0700)]
Add .gitignore
Keith Packard [Sat, 4 Aug 2012 03:59:35 +0000 (20:59 -0700)]
Fix the layer names in the 'zip' target
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 03:59:06 +0000 (20:59 -0700)]
Add missing left outline edge
This must have gotten lost while resizing the board
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 01:01:04 +0000 (18:01 -0700)]
Add vendor/loadstatus/vendor_part_number/value to all parts
Partslist is now clean of 'unknown' values
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 4 Aug 2012 00:22:23 +0000 (17:22 -0700)]
Fix DIP switch footprints. Add vendor for SOT-23 diodes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 06:03:59 +0000 (23:03 -0700)]
Add datasheet for resistor array
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 06:02:05 +0000 (23:02 -0700)]
Shrink board to 4x4 square
Moved middle holes around, and pulled the USB connector up so that the
board is now square
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 04:39:38 +0000 (21:39 -0700)]
A6R rotary switches require custom 36mil holes
Can't use the standard DIP6 package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 3 Aug 2012 03:04:56 +0000 (20:04 -0700)]
Add pull-ups on the rotary switches
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 2 Aug 2012 05:45:11 +0000 (22:45 -0700)]
Add some missing symbols and packages
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Jul 2012 20:31:33 +0000 (13:31 -0700)]
Add 74hc597 datasheet
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Jul 2012 08:37:05 +0000 (01:37 -0700)]
Fix connection between relay and spade lug
Tried using a polygon, but that refused to leave bare copper under
the spade connector. Ended up using a bunch of fat lines, which seems
to look right.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Jul 2012 07:46:43 +0000 (00:46 -0700)]
Use USB micro B. Adjust outline to match
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 22 Jul 2012 06:26:51 +0000 (23:26 -0700)]
Un-thermal vias that aren't on pins
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 Jul 2012 04:20:50 +0000 (21:20 -0700)]
Rename to 'TeleFire'
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jun 2012 04:47:41 +0000 (21:47 -0700)]
Fix quick-disconnect package
It was completely busted; now it has two pins and a pad so that the
top side is exposed for soldering and the bottom has plenty of metal
to solder the two pins as well.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jun 2012 00:48:43 +0000 (17:48 -0700)]
Update relay footprint to match high-current version
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 8 Jun 2012 22:43:13 +0000 (15:43 -0700)]
Shrink to 4" x 4.5"
Should allow two of these to fit with one LCO board in a panel
less than 60 sq in
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 6 Jun 2012 08:26:24 +0000 (01:26 -0700)]
Shrink board to 4.5" square
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 6 Jun 2012 02:33:04 +0000 (19:33 -0700)]
Add NC symbols
Keith Packard [Wed, 6 Jun 2012 01:58:54 +0000 (18:58 -0700)]
Fix board size, place screws
Keith Packard [Tue, 5 Jun 2012 23:48:55 +0000 (16:48 -0700)]
Clean up DRC errors
Add pintypes to symbol files, mark NC pins.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 5 Jun 2012 22:53:25 +0000 (15:53 -0700)]
And everything appears happy again. dunno.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 5 Jun 2012 22:52:45 +0000 (15:52 -0700)]
Something went badly wrong with pcb and everything disappeared.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 May 2012 14:00:14 +0000 (07:00 -0700)]
Nearly finished with pcb now
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 May 2012 01:29:31 +0000 (18:29 -0700)]
Switch to 4-pin Micro MaTch for debug
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 May 2012 01:27:56 +0000 (18:27 -0700)]
Copy TeleMini PCB file over, stripping out the unnecessary bits
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 4 May 2012 00:14:11 +0000 (18:14 -0600)]
only use gafrc, force use of local symbols only, flesh out local symbols
Bdale Garbee [Fri, 4 May 2012 00:00:46 +0000 (18:00 -0600)]
put a better gafrc in place
Keith Packard [Thu, 3 May 2012 23:55:40 +0000 (16:55 -0700)]
Add enough packages to get the PCB to work
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 May 2012 06:50:13 +0000 (23:50 -0700)]
Add beeper. Make sense1 detect shorted relay.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 May 2012 06:15:24 +0000 (23:15 -0700)]
Initial telepad circuit
Started with telemini, switched the pyro circuit around to include a
relay, measuring continuity on the output of that relay.
Added two BCD switches to set the group number
Added an 8-way LED driver so we can say things.
Signed-off-by: Keith Packard <keithp@keithp.com>