add footprints from pcb used in test stand board that weren't in our library

diff --git a/packages/0.125W_Carbon_Resistor.fp b/packages/0.125W_Carbon_Resistor.fp
new file mode 100644 (file)
index 0000000..33388ba
--- /dev/null
+++ b/packages/0.125W_Carbon_Resistor.fp
@@ -0,0 +1,12 @@
+
+Element(0x00000000 "" "R11" "" 1800 1050 56 -138 0 100 0x00000000)
+(
+       Pin(0 0 60 30 60 28 "" "1" 0x00000001)
+       Pin(0 -300 60 30 60 28 "" "2" 0x00000001)
+       ElementLine (0 -50 0 -90 10)
+       ElementLine (40 -90 -40 -90 10)
+       ElementLine (-40 -90 -40 -210 10)
+       ElementLine (-40 -210 40 -210 10)
+       ElementLine (40 -210 40 -90 10)
+       ElementLine (0 -210 0 -250 10)
+       )

diff --git a/packages/SO16.fp b/packages/SO16.fp
new file mode 100644 (file)
index 0000000..08dfc3a
--- /dev/null
+++ b/packages/SO16.fp
@@ -0,0 +1,73 @@
+       # number of pads
+       # pad width in 1/1000 mil
+       # pad length in 1/1000 mil
+       # pad pitch 1/1000 mil
+       # seperation between pads on opposite sides 1/1000 mil
+       # X coordinates for the right hand column of pads (1/100 mils)
+       # pad clearance to plane layer in 1/100 mil
+       # pad soldermask width in 1/100 mil
+       # silk screen width (1/100 mils)
+       # figure out if we have an even or odd number of pins per side
+       # silk bounding box is -XMAX,-YMAX, XMAX,YMAX (1/100 mils)
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Small outline package, narrow (150mil)" "" "SO16" 0 0 -2000 -6000 0 100 0x00000000]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+        Pad[   -13500 -17500 
+                        -7000 -17500 
+                       2000 1000 3000 "1" "1" 0x00000100]
+        Pad[   -13500 -12500 
+                        -7000 -12500 
+                       2000 1000 3000 "2" "2" 0x00000100]
+        Pad[   -13500 -7500 
+                        -7000 -7500 
+                       2000 1000 3000 "3" "3" 0x00000100]
+        Pad[   -13500 -2500 
+                        -7000 -2500 
+                       2000 1000 3000 "4" "4" 0x00000100]
+        Pad[   -13500 2500 
+                        -7000 2500 
+                       2000 1000 3000 "5" "5" 0x00000100]
+        Pad[   -13500 7500 
+                        -7000 7500 
+                       2000 1000 3000 "6" "6" 0x00000100]
+        Pad[   -13500 12500 
+                        -7000 12500 
+                       2000 1000 3000 "7" "7" 0x00000100]
+        Pad[   -13500 17500 
+                        -7000 17500 
+                       2000 1000 3000 "8" "8" 0x00000100]
+        Pad[   13500 17500 
+                        7000 17500 
+                       2000 1000 3000 "9" "9" 0x00000100]
+        Pad[   13500 12500 
+                        7000 12500 
+                       2000 1000 3000 "10" "10" 0x00000100]
+        Pad[   13500 7500 
+                        7000 7500 
+                       2000 1000 3000 "11" "11" 0x00000100]
+        Pad[   13500 2500 
+                        7000 2500 
+                       2000 1000 3000 "12" "12" 0x00000100]
+        Pad[   13500 -2500 
+                        7000 -2500 
+                       2000 1000 3000 "13" "13" 0x00000100]
+        Pad[   13500 -7500 
+                        7000 -7500 
+                       2000 1000 3000 "14" "14" 0x00000100]
+        Pad[   13500 -12500 
+                        7000 -12500 
+                       2000 1000 3000 "15" "15" 0x00000100]
+        Pad[   13500 -17500 
+                        7000 -17500 
+                       2000 1000 3000 "16" "16" 0x00000100]
+       ElementLine[-15500 -19500 -15500  19500 1000]
+       ElementLine[-15500  19500  15500  19500 1000]
+       ElementLine[ 15500  19500  15500 -19500 1000]
+       ElementLine[-15500 -19500 -2500 -19500 1000]
+       ElementLine[ 15500 -19500  2500 -19500 1000]
+       # punt on the arc on small parts as it can cover the pads
+       ElementArc[0 -19500 2500 2500 0 180 1000]
+)

diff --git a/packages/SOT23.fp b/packages/SOT23.fp
new file mode 100644 (file)
index 0000000..4f89c2d
--- /dev/null
+++ b/packages/SOT23.fp
@@ -0,0 +1,30 @@
+                                    # 78 for SOT23
+                                    # 82 for SOT23
+             # 41 for SOT23
+                      # 34 for SOT23, 24 for SOT25
+Element(0x00 "SMT transistor, 3 pins" "" "SOT23" 148 0 3 100 0x00)
+(
+       ElementLine(0 0 0 139 10)
+       ElementLine(0 139 128 139 10)
+       ElementLine(128 139 128 0 10)
+       ElementLine(128 0 0 0 10)
+       # 1st side, 1st pin
+       Pad(25 107
+              25 113
+                          34
+                             "1" "1" 0x100)
+       # 1st side, 2nd pin
+       # 1st side, 3rd pin
+       Pad(103 107
+           103 113
+                          34
+                             "2" "2" 0x100)
+       # 2nd side, 3rd pin
+       # 2nd side, 2nd pin
+       Pad(64 25
+              64 31
+                          34
+                             "3" "3" 0x100)
+       # 2nd side, 1st pin
+       Mark(25 110)
+)

diff --git a/pcb-rnd.mk b/pcb-rnd.mk
index daa1efe50ed206f3fd93e4a399af2a20ec4a81f9..b957e4852cba6d6cfd87d0a34d5f81e52a5ace46 100644 (file)
--- a/pcb-rnd.mk
+++ b/pcb-rnd.mk
@@ -57,6 +57,7 @@ pcb:  $(SCHEMATICS) Makefile $(CONFIG)
        lepton-netlist -g tEDAx -o $(PROJECT).tdx $(SCHEMATICS)
        echo 'LoadTedaxFrom(netlist, $(PROJECT).tdx); SaveTo(Layout)' | \
                pcb-rnd --gui batch $(PROJECT).lht
+#      echo "Run pcb-rnd and import $(PROJECT).tdx"
 
 $(PROJECT).xy: $(PROJECT).lht $(CONFIG)
        pcb-rnd -x XY $(PROJECT).lht
@@ -241,7 +242,7 @@ stencil:    $(PROJECT).lht
        mv $(PROJECT).toppaste.gbr stencil.gbr
 
 clean:
-       rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx
+       rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx *.backup
        rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln PCB*save
        rm -f *.partslist *.unsorted $(PROJECT).xls muffin-*.pdf
        rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv