basic things are working

diff --git a/pcb-rnd.mk b/pcb-rnd.mk
new file mode 100644 (file)
index 0000000..36726fe
--- /dev/null
+++ b/pcb-rnd.mk
@@ -0,0 +1,289 @@
+AM=../altusmetrum
+SCHEME=$(AM)/scheme
+
+.SUFFIXES: .sch .lht .ps .pdf
+
+# need to have PROJECT defined
+ifndef PROJECT
+       PROJECT=undefined
+endif
+
+# if SCHEMATICS not defined, default to one sheet with project name
+ifndef SCHEMATICS
+       SCHEMATICS=$(PROJECT).sch
+endif
+
+CONFIG=gafrc attribs project project.lht
+
+all:   drc partslist partslist.csv pcb
+
+drc:   $(PROJECT).drc
+
+$(PROJECT).drc: $(SCHEMATICS) Makefile $(CONFIG)
+       -gnetlist -g drc2 $(SCHEMATICS) -o $@
+
+partslists: partslist partslist.csv partslist.dk partslist-check.dk partslist-mouser.csv partslist.other
+
+partslist:     $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
+       gnetlist -g bom -o $(PROJECT).unsorted $(SCHEMATICS)
+       head -n1 $(PROJECT).unsorted > partslist
+       tail -n+2 $(PROJECT).unsorted | sort | awk -f $(AM)/bin/fillpartslist >> partslist
+       rm -f $(PROJECT).unsorted
+
+partslist.csv: $(SCHEMATICS) Makefile $(AM)/preferred-parts $(CONFIG)
+       gnetlist -L $(SCHEME) -g partslistgag -o $(PROJECT).csvtmp $(SCHEMATICS)
+       (head -n1 $(PROJECT).csvtmp; tail -n+2 $(PROJECT).csvtmp | sort -t \, -k 8 | awk -f $(AM)/bin/fillpartscsv | sort ) > $@ && rm -f $(PROJECT).csvtmp
+
+partslist.dk: partslist.csv
+       $(AM)/bin/partslist-vendor --vendor digikey partslist.csv > $@
+
+partslist-check.dk: partslist.csv
+       $(AM)/bin/partslist-vendor --vendor digikey --mfg partslist.csv > $@
+
+partslist-mouser.csv: partslist.csv
+       $(AM)/bin/partslist-vendor --vendor mouser partslist.csv > $@
+
+partslist.other: partslist.csv
+       $(AM)/bin/partslist-vendor --not-vendor digikey,mouser partslist.csv > $@
+
+$(PROJECT)-seeed.csv: partslist.csv
+       $(AM)/bin/partslist-vendor --vendor seeed partslist.csv > $@
+
+$(PROJECT)-goldphoenix.csv: partslist.csv
+       $(AM)/bin/partslist-vendor --vendor goldphoenix partslist.csv > $@
+
+pcb:   $(SCHEMATICS) Makefile $(CONFIG)
+       gsch2pcb-rnd project
+
+$(PROJECT).xy: $(PROJECT).pcb $(CONFIG)
+       pcb -x bom $(PROJECT).pcb
+
+$(PROJECT).bottom.gbr: $(PROJECT).pcb $(CONFIG)
+       pcb -x gerber $(PROJECT).pcb
+       @case "$(SILK)" in \
+       none)   rm -f $(PROJECT).topsilk.gbr $(PROJECT).bottom.gbr; \
+               ;; \
+       top)    rm -f $(PROJECT).bottomsilk.gbr; \
+               ;; \
+       bottom) rm -f $(PROJECT).topsilk.gbr; \
+               ;; \
+       both) \
+               ;; \
+       *)      echo "Invalid silk $(SILK)"; exit 1; \
+               ;; \
+       esac
+
+$(PROJECT).all-drill.cnc: $(PROJECT).bottom.gbr
+       gerbv -x drill -o $(PROJECT).all-drill.cnc $(PROJECT).plated-drill.cnc $(PROJECT).unplated-drill.cnc
+
+zip: $(PROJECT).zip
+
+$(PROJECT).zip: $(PROJECT).bottom.gbr $(PROJECT).xy Makefile
+       rm -f $@ && zip $@ $(PROJECT).*.gbr $(PROJECT).*.cnc $(PROJECT).xy # $(PROJECT).xls
+
+ac: $(PROJECT)-ac.zip $(PROJECT)-bom.csv
+
+$(PROJECT)-bom.csv: partslist.csv
+       cp partslist.csv $@
+
+$(PROJECT)-ac.zip:  $(PROJECT).bottom.gbr $(PROJECT).xy
+       cp $(PROJECT).bottom.gbr $(PROJECT).gbl
+       cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
+       if [ -f $(PROJECT).bottomsilk.gbr ]; then \
+               cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
+       fi
+       if [ -f $(PROJECT).bottompaste.gbr ]; then \
+               cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
+       fi
+       if [ -f $(PROJECT).topsilk.gbr ]; then \
+               cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
+       fi
+       if [ -f $(PROJECT).toppaste.gbr ]; then \
+               cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
+       fi
+       cp $(PROJECT).outline.gbr $(PROJECT).gml
+       cp $(PROJECT).top.gbr $(PROJECT).gtl
+       cp $(PROJECT).topmask.gbr $(PROJECT).gts
+       cp $(PROJECT).plated-drill.cnc $(PROJECT).ncd
+       if [ -f $(PROJECT).unplated-drill.cnc ]; then \
+               cp $(PROJECT).unplated-drill.cnc $(PROJECT).drd; \
+       fi
+       if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
+               cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
+       elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
+       fi
+       rm -f $@ && zip $@ \
+               $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
+               $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
+               $(PROJECT).gml $(PROJECT).ncd $(PROJECT).gml $(PROJECT).drd \
+               $(PROJECT).gl2 $(PROJECT).gl3 \
+               $(PROJECT).xy
+
+oshpark: $(PROJECT)-oshpark.zip
+
+$(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc 
+       cp $(PROJECT).bottom.gbr bottom\ layer.ger
+       cp $(PROJECT).bottommask.gbr bottom\ solder\ mask.ger
+       if [ -f $(PROJECT).bottomsilk.gbr ]; then \
+               cp $(PROJECT).bottomsilk.gbr bottom\ silk\ screen.ger; \
+       fi
+       if [ -f $(PROJECT).topsilk.gbr ]; then \
+               cp $(PROJECT).topsilk.gbr top\ silk\ screen.ger; \
+       fi
+       cp $(PROJECT).outline.gbr board\ outline.ger
+       cp $(PROJECT).top.gbr top\ layer.ger
+       cp $(PROJECT).topmask.gbr top\ solder\ mask.ger
+       cp $(PROJECT).all-drill.cnc drills.xln
+       if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
+               cp $(PROJECT).group1.gbr internal\ plane\ 1.ger; \
+               cp $(PROJECT).group2.gbr internal\ plane\ 2.ger; \
+       elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
+               cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
+               cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
+       fi
+       rm -f $@ && zip $@ *.ger *.xln
+
+seeed: $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
+
+$(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(SEEED_EXTRA)
+       cp $(PROJECT).bottom.gbr $(PROJECT).gbl
+       cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
+       if [ -f $(PROJECT).bottomsilk.gbr ]; then \
+               cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
+       fi
+       if [ -f $(PROJECT).bottompaste.gbr ]; then \
+               cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
+       fi
+       if [ -f $(PROJECT).topsilk.gbr ]; then \
+               cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
+       fi
+       if [ -f $(PROJECT).toppaste.gbr ]; then \
+               cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
+       fi
+       cp $(PROJECT).outline.gbr $(PROJECT).gml
+       cp $(PROJECT).top.gbr $(PROJECT).gtl
+       cp $(PROJECT).topmask.gbr $(PROJECT).gts
+       cp $(PROJECT).all-drill.cnc $(PROJECT).txt
+       if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
+               cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
+       elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
+       fi
+       rm -f $@ && zip $@ \
+               $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
+               $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
+               $(PROJECT).gml $(PROJECT).txt \
+               $(PROJECT).gl2 $(PROJECT).gl3 \
+               $(PROJECT).xy $(PROJECT)-sch.pdf \
+               $(SEEED_EXTRA)
+
+goldphoenix: $(PROJECT)-goldphoenix.zip
+
+$(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-sch.pdf $(PROJECT).xy $(PROJECT)-goldphoenix.csv
+       cp $(PROJECT).bottom.gbr $(PROJECT).gbl
+       cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
+       if [ -f $(PROJECT).bottomsilk.gbr ]; then \
+               cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
+       fi
+       if [ -f $(PROJECT).bottompaste.gbr ]; then \
+               cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
+       fi
+       if [ -f $(PROJECT).topsilk.gbr ]; then \
+               cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
+       fi
+       if [ -f $(PROJECT).toppaste.gbr ]; then \
+               cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
+       fi
+       cp $(PROJECT).outline.gbr $(PROJECT).gml
+       cp $(PROJECT).top.gbr $(PROJECT).gtl
+       cp $(PROJECT).topmask.gbr $(PROJECT).gts
+       cp $(PROJECT).all-drill.cnc $(PROJECT).txt
+       if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
+               cp $(PROJECT).group1.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl3; \
+       elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
+               cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
+       fi
+       rm -f $@ && zip $@ \
+               $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
+               $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
+               $(PROJECT).gml $(PROJECT).txt \
+               $(PROJECT).gl2 $(PROJECT).gl3 \
+               $(PROJECT).xy $(PROJECT)-sch.pdf \
+               $(PROJECT)-goldphoenix.csv
+
+stencilsunlimited:     $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
+       rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
+
+stencil:       $(PROJECT).pcb
+       pcb -x gerber --paste-adjust -0.075 $(PROJECT).pcb
+       mv $(PROJECT).toppaste.gbr stencil.gbr
+
+clean:
+       rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip 
+       rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln
+       rm -f *.partslist *.new.pcb *.unsorted $(PROJECT).xls muffin-5267.pdf muffin-keithp.pdf
+       rm -f partslist-check.dk partslist.dk partslist-mouser.csv partslist.other
+       rm -f $(PROJECT)-sch.ps $(PROJECT)-sch.pdf $(PROJECT)-pcb.ps $(PROJECT)-pcb.pdf
+       rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
+       rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
+       rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
+       rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
+       rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
+       rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
+
+muffins: muffin-5267.pdf muffin-keithp.pdf
+
+muffin-5267.pdf: partslist.csv $(AM)/glabels/muffin-short-5267.glabels
+       glabels-3-batch $(AM)/glabels/muffin-short-5267.glabels -i partslist.csv -o $@ > /dev/null
+
+muffin-keithp.pdf: partslist.csv $(AM)/glabels/muffin-5267.glabels
+       glabels-3-batch $(AM)/glabels/muffin-5267.glabels -i partslist.csv -o $@ > /dev/null
+
+.sch.ps:
+       gschem -p -o $@ -s /usr/share/gEDA/scheme/print.scm $*.sch
+
+.ps.pdf:
+       ps2pdf $*.ps
+
+SCHEMATICS_PS=$(SCHEMATICS:.sch=.ps)
+SCHEMATICS_PDF=$(SCHEMATICS:.sch=.pdf)
+
+$(PROJECT)-sch.pdf:    $(SCHEMATICS_PDF)
+       pdfjoin -o $@ $(SCHEMATICS_PDF)
+
+$(PROJECT)-pcb.ps:     $(PROJECT).pcb $(CONFIG)
+       pcb -x ps --psfile $@ --media Letter --ps-color $(PROJECT).pcb
+
+$(PROJECT)-pcb.pdf:    $(PROJECT)-pcb.ps
+       ps2pdf $(PROJECT)-pcb.ps
+
+$(PROJECT)-big.ps:     $(PROJECT).pcb $(CONFIG)
+       pcb -x ps --psfile $@ --media Letter --ps-color --fill-page --no-align-marks $(PROJECT).pcb
+
+$(PROJECT)-big.pdf:    $(PROJECT)-big.ps
+       ps2pdf $(PROJECT)-big.ps
+
+pdf:   $(PROJECT)-sch.pdf $(PROJECT)-pcb.pdf $(PROJECT)-big.pdf
+
+project:
+       (echo 'schematics $(SCHEMATICS)'; \
+        echo 'output-name $(PROJECT)'; \
+        echo 'skip-m4') > $@
+
+attribs: $(AM)/attribs
+       cp $(AM)/attribs $@
+
+gafrc:
+       (echo '; empty the library path and populate it with only our own symbols'; \
+        echo '(reset-component-library)'; \
+        echo '(load "../altusmetrum/gafrc")') > $@
+
+.gitignore: $(AM)/gitignore.in
+       sed 's/@@PROJECT@@/$(PROJECT)/g' $(AM)/gitignore.in > .gitignore