moving lht generator for 11071 out of tree until I have a working version

diff --git a/packages/11071.py b/packages/11071.py
deleted file mode 100755 (executable)
index faccf20..0000000
--- a/packages/11071.py
+++ /dev/null
@@ -1,129 +0,0 @@
-#! /usr/bin/python3
-#
-# generate lihata footprint for 4ucon 11071 tabbed micro USB connector
-# Copyright 2020 by Bdale Garbee <bdale@gag.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-from fplht import *
-
-# dimensions taken from 4ucon part drawing
-# note that we define Y origin to be the board edge, not center mass
-
-pad_width = 0.4
-pad_height = 1.35
-pad_spacing = 0.65
-pad_y = 1.45 + 3.35 - pad_height/2
-
-tab_width = 1.9
-tab_height = 1.9
-tab_x = 0.2 + tab_width / 2
-tab_y = 1.45
-
-slot_x = 6.40 / 2
-slot_y = 1.45
-slot_width = 0.45
-slot_height = 1.55
-slot_copper = (2.15 - 1.55) / 2
-
-wing_width = 1.6
-wing_height = 1.4
-wing_x = 3.2
-wing_y = 1.45 + 2.25
-
-fp = footprint()
-
-fp.name = "11071"
-fp.description = "4ucon 11071 tabbed micro USB connector"
-fp.copyright = "Copyright 2020 by Bdale Garbee <bdale@gag.com>"
-
-fp.pad({'x': pad_spacing * 2,
-        'y': pad_y,
-        'width': pad_width,
-        'height': pad_height,
-        'name': 'VBUS',
-        'number': '1'})
-fp.pad({'x': pad_spacing * 1,
-        'y': pad_y,
-        'width': pad_width,
-        'height': pad_height,
-        'name': 'D-',
-        'number': '2'})
-fp.pad({'x': pad_spacing * 0,
-        'y': pad_y,
-        'width': pad_width,
-        'height': pad_height,
-        'name': 'D+',
-        'number': '3'})
-fp.pad({'x': pad_spacing * -1,
-        'y': pad_y,
-        'width': pad_width,
-        'height': pad_height,
-        'name': 'HS',
-        'number': '4'})
-fp.pad({'x': pad_spacing * -2,
-        'y': pad_y,
-        'width': pad_width,
-        'height': pad_height,
-        'name': 'GND',
-        'number': '5'})
-
-# mounting "wings", or tabs next to the signal pads
-
-fp.pad({'x': -wing_x,
-        'y': wing_y,
-        'width': wing_width,
-        'height': wing_height,
-        'spacing': 0,
-        'name': "",
-        'number': "G"})
-fp.pad({'x':  wing_x,
-        'y':  wing_y,
-        'width': wing_width,
-        'height': wing_height,
-        'spacing': 0,
-        'name': "",
-        'number': "G"})
-
-# mounting tabs under package
-
-fp.pad({'x': -tab_x,
-        'y': tab_y,
-        'width': tab_width,
-        'height': tab_height,
-        'spacing': 0,
-        'name': "",
-        'number': "G"})
-fp.pad({'x':  tab_x,
-        'y': tab_y,
-        'width': tab_width,
-        'height': tab_height,
-        'spacing': 0,
-        'name': "",
-        'number': "G"})
-
-# slots for through-hole mounting tabs
-fp.slot({'x': -slot_x,
-         'y': slot_y,
-         'width': slot_width,
-         'height': slot_height,
-         'thickness': slot_width + slot_copper * 2,
-         'name': 'GND',
-         'number': 5})
-fp.slot({'x':  slot_x,
-         'y': slot_y,
-         'width': slot_width,
-         'height': slot_height,
-         'thickness': slot_width + slot_copper * 2,
-         'name': 'GND',
-         'number': 5})
-
-fp.emit()
\ No newline at end of file